Samson Electronics BRS-2000 Portable speaker User Manual

Samson Electronics Inc. Portable speaker

User Manual

Samson Electronics Inc.3400 E. Slauson Ave.Maywood, CA 90270Ph: 323.585.6393Fax: 323.585.6202Web: http://www.blackmoremobile.comBRS‐2001 Portable Audio SystemFCC ID: 2AHR7‐BRS‐2000Introduction:The BRS‐2001 is a portable and amplified audio system with integrated MP3 music player, BluetoothConnectivity, dual ¼” MIC Input, LED accent lighting a rechargeable battery with standard AC powercord. This model boasts USB and TF card inputs as well as 3.5mm Aux stereo inputs and an FM tuner.Sound is produced by a 6.5” woofer a 1” piezo tweeter delivering 400W of musical power.Features:Portable and AmplifiedMusic Player with TF Card and USB inputsBluetooth ConnectivityFM RadioLED Accent lightingWireless remote control400 watts of total musical outputPower Supply: DC 5V, 1A, rechargeable batteryCaution:Please read All Operating Instructions before using this productAvoid electrical shock, DO NOT OPEN THIS UNIT, THERE ARE NO REPLACEABLE PARTS INSIDE. Please refer toyour warranty information for service.Do not Expose this product to Moisture, Water, Rain or Snow. Keep away from direct heat sources. Damageditems will not be accepted for warrantyDo not clean this unit with solvents or chemicalsInsure that all volume and gain controls are set to “0” when connecting source units
Functions:1. Mic Volume: This adjusts the amount of Microphone signal sent to the speaker2. USB Input: This is a full size USB2.0 female input. It has a read capacity of 4GB. Music files mustbe formatted as MP3 in order to be played via USBTF card Input: Capable of reading cards up to 4GB. Music files must be formatted as MP3 in orderto be played via TF card.3. LCD Display: Displays track and input information4. 3.5mm aux audio input/ 5V DC 1A battery charging input5. Master Volume Control: This controls the overall output of the speakers. This volume controlsupersedes all other built in volume controls.6. MP3 player control panel: These provide play, pause, track forward/reverse and playback modeselection7. Dual ¼” MIC input: These provides an input for standard ¼” microphones and audio source cables8. Master power switch: This is the master switch the powers the unit off or on.
9. BatteryChargingindicator1. power ‐will power on or off the main unit2. Mode–will select between USB/SD, FM and AUX in3. Mute – This will cut all sound produced by speakers4. Play/Pause – will play orpause the track being played by the onboard mp3 player5. EQ – This will scroll through the EQ presets6. Prev – Will play the previous track being played by the onboard mp3 player7. Next–will play the next track being played by the onboard mp3 player8. VOL ‐Volume Down9. VOL + Volume UP10. RPT‐This will repeat the track being played by the onboard mp3 player11. Clock–Sleep Timer12. Number pad – this allows direct input of FM radio station or MP3 track
Operation:Setup:1. Ensure that the unit is connected to the appropriate power source using the provided AC powerplug, or 12VDC power inputs.2. Plug in the AC power cable and choose your input method using the MODE button on the unit orremote.3. Ensure that the master volume is turned to the “0” position before connecting any audio source.4. Place the speaker in a location that is away from any direct heat source, moisture, or extremehumidity.Playback:*Use the Mode select button to choose between SD Card, USB, or Bluetooth*1. Using a USB storage device: The player can accept thumb drives and storage devices in USB 2.0 orless format. Files can be played back formatted as MP3 only. The USB connection can readdevices up to 4GB.2. Using a TF card: The player can accept thumb drives and storage devices in USB 2.0 or less format.Files can be played back formatted as MP3 only. The SD Card input can read devices up to 4GB.3. Using Bluetooth: Ensure that your audio source has bluetooth enabled/discoverable, next turnyour speaker on and select bluetooth mode. Search for available Bluetooth devices on yoursource unit and select BRS‐2001. Once connected you can play audio from your device when theunit is in Bluetooth Mode.4. Using Aux Audio in: Ensure that your Aux audio connections are securely connected to thespeaker and audio source before powering on this unit. If your music source has a volumecontrols ensure that the volume is set to 75%. Begin playing music and adjust the master volumeto your desired level.5. Using Microphones: Ensure that the Microphone volume is set to “0”. Connect your microphoneto ¼” Jacks located on 7. Ensure that your microphone is turned on. Adjust the volume control todesired volume.6. Using FM: Press the Mode button till FM is selected. Once in FM mode press the Play/pausebutton on the speaker and the FM tuner will begin programming all available stations. You can alsomanually input the desired radio station using the keypad on the remote control unit.Maintenance and care:Store and use in a dry environment away from direct heat sources and moisture.Do not clean with solvents or detergents. Only use a mildly damp cloth to dust or clean.Use on a flat stable surface. This unit will vibrate when played at high volume and willshift position. Please use caution when placing this on any surfaceUse only the correct power source. AC 110‐240V 50/60 HzMaintain all gain controls at correct levels. Excessive gain controls coupled with highvolume can damage the speaker drivers.Collapse all antennas and disconnect all cables before moving the unit.
Troubleshooting:Music files not read: Ensure that your music files are encoded as MP3 Audio Files.No Sound: Please ensure that all volume and gain controls are not in the “0” position andthat all source units are on and producing volume. Check volume controls at source unitsBluetooth not connecting: Ensure that the Bluetooth devise you are connecting hasBluetoothonandisdiscoverable.No Power: please ensure that your AC power connection is fully engaged and connectedto a non surging power source.Sound is distorted: Please ensure that your source volume and input gains on the speakerare even and balanced. Also check that your connecting cables from source units are notdamaged or broken.No sound from Microphone: Ensure that the MIC gain control is not set to “0” ensurethat the microphone is turned on and that all connecting cables are fully engaged andworking properly.If you are still having technical issues with your product and could use some assistance please contact usat support@samsonelec.comFCC STATEMENT :This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesiredoperation.Warning: Changes or modifications not expressly approved by the party responsible for compliance couldvoid the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:‐Reorient or relocate the receiving antenna.‐Increase the separation between the equipment and receiver.‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.‐Consult the dealer or an experienced radio/TV technician for help.FCC Radiation Exposure StatementThe device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable exposure condition without restriction.

Navigation menu