Samsung Electro Mechanics ST-GM42003N ESL Graphic TAG User Manual

REV 1.0

Samsung Electro

CUSTOMER APPROVAL SHEET

Company Name

MODEL

CUSTOMER

APPROVAL

APPROVAL FOR SPECIFICATIONS ONLY (Spec. Ver.

CUSTOMER REMARK :

Issued By

IH Jo

150, Maeyoung-ro(

Maetan

S-

TAG Datasheet(ST

Samsung Electro

-Mechanics

Proprietary and Confidential

CUSTOMER APPROVAL SHEET

Company Name

ST-GM42

00

APPROVAL FOR SPECIFICATIONS ONLY (Spec. Ver.

1.

CUSTOMER REMARK :

Issued By

Checked By

Approved By

IH Jo

YB Lee JG Ryu

Samsung Electro-Mechanics

Maetan

3-Dong), YoungTong-Gu, Suwon, Gy

eon

Tel : 82-31-210-5114

TAG Datasheet(ST

-GM42003N)

Proprietary and Confidential

1/21

CUSTOMER APPROVAL SHEET

00

3N

1.

0 )

Approved By

eon

ggi-Do, Korea

REV 1.0

Samsung Electro

S-TAG

Datasheet

S-

Label (Electronic Label System)

REV 1.0

Samsung Electro-Mechanics

2015-06-30

Summary

This datasheet presents the

general performance and specification

Shelf Label) system, which is

based on

S-

TAG Datasheet(ST

Samsung Electro

-Mechanics

Proprietary and Confidential

Datasheet

Label (Electronic Label System)

general performance and specification

s of S-Tag

for

based on

IEEE 802.15.4.

The names of actual companies and products mentioned herein

may be the trademarks of their respective own

No part of this document may be reproduced, stored in a

retrieval system, or transmitted in any form or by any means

without the express written consent of Samsung Electro

Mechanics.

This document is subject to change without notice.

TAG Datasheet(ST

-GM42003N)

Proprietary and Confidential

2/21

for

S-Label ESL (Electronic

The names of actual companies and products mentioned herein

may be the trademarks of their respective own

ers.

No part of this document may be reproduced, stored in a

retrieval system, or transmitted in any form or by any means

without the express written consent of Samsung Electro

-

This document is subject to change without notice.

REV 1.0

Samsung Electro

Table of Contents

1 GENERAL DESCRIPTION

1.1 F

EATURES

................................

1.2 T

YPICAL

A

PPLICATIONS

................................

1.3 A

PPEARANCE

................................

2 SPECIFICATION

................................

2.1 P

RODUCT

S

PECIFICATION

................................

2.2 R

ADIO

(RF)

S

PECIFICATION

2.3 NFC

S

PECIFICATION

................................

2.4 M

ECHANICAL

D

RAWING

................................

2.5 L

ABELS

................................

2.6 B

ARCODE

S

CANNING

................................

3 OPERATION TEST

................................

4 ESL OPERATION BY DIS

PLAY

5 PACKAGE

................................

6

CAUTIONS FOR TREATME

6.1 U

SAGE

E

NVIRONMENT

................................

6.2 S

TORAGE AND

U

SE

................................

6.3 B

ATTERY

R

EPLACEMENT

................................

6.4 FCC

................................

S-

TAG Datasheet(ST

Samsung Electro

-Mechanics

Proprietary and Confidential

................................................................

................................

PECIFICATION

................................................................

................................

PLAY

................................

CAUTIONS FOR TREATME

NT................................

................................

TAG Datasheet(ST

-GM42003N)

Proprietary and Confidential

3/21

................................

..... 5

................................

......................... 6

................................

......... 6

................................

...................... 6

................................

.................. 7

................................

....... 7

................................

... 7

................................

............. 8

................................

......... 8

................................

............................ 10

................................

............ 12

................................

.............. 13

................................

........................... 15

................................

........................... 18

................................

............................. 19

................................

.......... 19

................................

.............. 19

................................

........ 20

................................

............................... 21

REV 1.0

Samsung Electro

Document History

Rev. Date

1.0 30 Jun15

Initial release

S-

TAG Datasheet(ST

Samsung Electro

-Mechanics

Proprietary and Confidential

Revision history

Initial release

TAG Datasheet(ST

-GM42003N)

Proprietary and Confidential

4/21

Page

-

REV 1.0

Samsung Electro

1

General

Description

This S-Tag

product is a part of

Gateway (S-Gate)

, Remote controller

displays price and other product information on

paper in places like retail markets.

S-Tag

receives product price/information updates from

and other information.

S-Tag

is the product based on IEEE standard 802.15.4 for low power wirele

applications. S-Tag

consists of RF transceiver, RF circuitry and

802.15.4 based network protocol and MAC protocol and other peripheral devices.

S-

TAG Datasheet(ST

Samsung Electro

-Mechanics

Proprietary and Confidential

Description

product is a part of

Samsung S-

Label (Electronic Shelf Label) system as well as S

, Remote controller

(S-RC). S-

Label system make up a system that electronically

displays price and other product information on

S-

Tags, which has been traditionally printed

paper in places like retail markets.

receives product price/information updates from

S-Gate and updates or

changes

is the product based on IEEE standard 802.15.4 for low power wirele

consists of RF transceiver, RF circuitry and

ARM Cortex M3

802.15.4 based network protocol and MAC protocol and other peripheral devices.

Figure 1 ESL System

TAG Datasheet(ST

-GM42003N)

Proprietary and Confidential

5/21

Label (Electronic Shelf Label) system as well as S

-Label

Label system make up a system that electronically

Tags, which has been traditionally printed

or written on

changes

its display of price

is the product based on IEEE standard 802.15.4 for low power wirele

ss communication

ARM Cortex M3

MCU offering IEEE

REV 1.0

Samsung Electro

1.1

Features

-

Display : E-Paper D

isplay

-

Display Color : Black, White

-

Display Resolution :

400

-

Communication : Wireless communication based on IEEE 802.15.4

-

Operating on 2.4GHz Un

-

Low Power Consumption

-

External Wakeup : RF

Wakeup

-

Outline Dimension : 10

3

-

Case Color : White

-

Working condition: Indoor where wireless communication is availabl

-

NFC(13.56MHz) Available

1.2 Typical

Applications

-

Retail industry with electronic display

-

Intelligently communicating, managing, and optimizing price and product informations.

1.3 Appearance

S-

TAG Datasheet(ST

Samsung Electro

-Mechanics

Proprietary and Confidential

isplay

(EPD) (active type) (84.80 x 63.60 mm)

Display Color : Black, White

400

x 300 pixel (120dpi)

Communication : Wireless communication based on IEEE 802.15.4

Operating on 2.4GHz Un

licensed ISM band for ZigBee

(2405 ~ 2480 MHz)

Low Power Consumption

Wakeup

(using ISM Band[2.4GHz])

3

.5 mm x 87.5 mm x 14.5 mm

Working condition: Indoor where wireless communication is availabl

e.

NFC(13.56MHz) Available

Applications

Retail industry with electronic display

s, platforms, solutions and services

.

Intelligently communicating, managing, and optimizing price and product informations.

Figure 2 Appearance

TAG Datasheet(ST

-GM42003N)

Proprietary and Confidential

6/21

(2405 ~ 2480 MHz)

.

Intelligently communicating, managing, and optimizing price and product informations.

REV 1.0

Samsung Electro

2 Specification

2.1

Product

Specification

Item

Size

Battery

Display

Housing Color

Information display

Communication

Distance

Operation Temp.

Etc.

2.2

Radio (RF)

1

Specification

Item

Parameter

TX

Transmit Power

Error Vector Magnitude

Tx Current

RX

Receiver Sensitivity

1

Test Channel : 2480MHz

S-

TAG Datasheet(ST

Samsung Electro

-Mechanics

Proprietary and Confidential

Specification

Description

10

3

.

5

mm

x 8

7

.

5

mm

x 1

4.5

mm

CR2450 Lithium Battery (3V,

3

PCS

)

2.4 ~ 3.3Vdc (condition : In active status)

Electrical paper display (

active type

)

(

84.80

x

63.60

Display Resolution : 400 x 300 pixel

White

Price, Unit,

Symbol

etc.

Wireless communication based on IEEE 802.15.4

Radius

20m ( Line of Sight)

0 ~ 40 (@20~60% RH)

No additional anti

-

theft locking structure : Rail Mounted only

Specification

SPEC

Unit

Condition

Min

Typ

Max

-

0.5

2

.5

5

dBm

Error Vector Magnitude

-

1

0

30

%

When measured for 100

-

3

5

mA

Total current at max Tx Power

Receiver Sensitivity

-

90

-

dBm

PER <

TAG Datasheet(ST

-GM42003N)

Proprietary and Confidential

7/21

63.60

mm

)

Wireless communication based on IEEE 802.15.4

(2405 ~ 2480 MHz)

theft locking structure : Rail Mounted only

Condition

When measured for 100

chips

Total current at max Tx Power

PER <

1

%

REV 1.0

Samsung Electro

2.3

NFC Specification

Items

Parameter

NFC

Read/Write Distance

2.4

Mecha

nical Drawing

2.4.1 Case Dimension

S-

TAG Datasheet(ST

Samsung Electro

-Mechanics

Proprietary and Confidential

NFC Specification

spec. Units

Condition

Min

Typ

Max

Read/Write Distance

- 40 - mm

PCB status

- 30 - mm

TAG

nical Drawing

TAG Datasheet(ST

-GM42003N)

Proprietary and Confidential

8/21

Condition

PCB status

TAG

status

REV 1.0

Samsung Electro

2.4.2 Exploded View

S-

TAG Datasheet(ST

Samsung Electro

-Mechanics

Proprietary and Confidential

Figure 3 Mechanical Dimension

Figure 4 Exploded View

TAG Datasheet(ST

-GM42003N)

Proprietary and Confidential

9/21

REV 1.0

Samsung Electro

2.5

Labels

2.5.1 Serial Number I

nformation

Serial 1, 2 Code Value

14 3

G

Year : Last two digits of manufacturing year.

(00 ~ 99, E

xample : 201

Month : Manufacturing m

(1 ~ 9, X(10), Y(11), Z(12))

Date : Manufacturing da

(1 ~ 9, A(10) ~ V(31))

Vendor : Manufacturing

(S

: SEMTHAI, T : TSEM, etc

Line number : Manufactu

('A', 'B', 'C', etc)

Revision : Product revisio

(

A : First, B : Second, C : Third, etc

ZigBee IC Lot Number

: Last 3 characters

S-

TAG Datasheet(ST

Samsung Electro

-Mechanics

Proprietary and Confidential

nformation

Serial 1, 2 Code Value

G

S A A 2JW

Year : Last two digits of manufacturing year.

xample : 201

4 is '14')

ing month

(1 ~ 9, X(10), Y(11), Z(12))

g date

(1 ~ 9, A(10) ~ V(31))

ring ve

ndor

: SEMTHAI, T : TSEM, etc

)

facturing Line number

evision number

A : First, B : Second, C : Third, etc

)

: Last 3 characters

TAG Datasheet(ST

-GM42003N)

Proprietary and Confidential

10/21

REV 1.0

Samsung Electro

2.5.2 Product and

Mac Label Drawi

Product information is indicated in a printed sticker label. The information consists of MODEL (model

name), MFD (manufacturing date), S/N (serial number), MAC (MAC address), CE certification mark,

ID and Manufacture (SEMCO).

1) FCC ID : E2X-ST-

GM4200

2) Model Name : ST-GM

42

3)

MFD : (Month).(Date).(Year)

4) S/N :

Serial Number Information

5) MAC : barcode &

barcode number(hexadecimal 1

-

8 digits(1st ~ 8th)

-

2 digits(9th ~ 10th) :

-

1 digit(11th)

-

1 digit(12th)

S-

TAG Datasheet(ST

Samsung Electro

-Mechanics

Proprietary and Confidential

Mac Label Drawi

ngs

Figure 5 Product and Mac Labels

Product information is indicated in a printed sticker label. The information consists of MODEL (model

name), MFD (manufacturing date), S/N (serial number), MAC (MAC address), CE certification mark,

GM4200

3N

42

003N

MFD : (Month).(Date).(Year)

ex) May.16.2015

Serial Number Information

barcode number(hexadecimal 1

2 digits)

8 digits(1st ~ 8th)

: xxxxxxxx (Tag I.D.)

2 digits(9th ~ 10th) :

40 (Tag size & type)

1 digit(11th)

: 3 (Panel & NFC type)

1 digit(12th)

: x (Checksum)

TAG Datasheet(ST

-GM42003N)

Proprietary and Confidential

11/21

Product information is indicated in a printed sticker label. The information consists of MODEL (model

name), MFD (manufacturing date), S/N (serial number), MAC (MAC address), CE certification mark,

FCC

REV 1.0

Samsung Electro

2.6

Barcode Scanning

2.6.1

Barcode Scanning Condition

Typically Sc

an distance is 8 ~ 9cm and angle is horizontality

Example)

<Horizontality> <

S-

TAG Datasheet(ST

Samsung Electro

-Mechanics

Proprietary and Confidential

Barcode Scanning

Barcode Scanning Condition

an distance is 8 ~ 9cm and angle is horizontality

<Horizontality> <

TAG Datasheet(ST

-GM42003N)

Proprietary and Confidential

12/21

>

REV 1.0

Samsung Electro

3 Operation Test

It will be updated before 2

nd

release

 Equipments : Gateway

(S

 Target DUT : EPD TAG

 Test Scenario

Install Tag on Jig

Ready to Gateway(S

wake up Tag with R/C

Tag start to communicate wi

Tag display the numeric information received from Gateway

Check Tag(EPD display status & MAC address value)

Wake up Tag with R/C

Check Tag(EPD display(blank display))



Criterion

(Below

both

Good : You can

see ‘Black’

Compare MAC address with that of label attached to

S-

TAG Datasheet(ST

Samsung Electro

-Mechanics

Proprietary and Confidential

release

. Below is just a sample.

(S

-Gate), R/C (S-TAG), Jig for power supply

Figure 6 Operation Test

Ready to Gateway(S

-Gate) and R/C

wake up Tag with R/C

Tag start to communicate wi

th Gateway

Tag display the numeric information received from Gateway

Check Tag(EPD display status & MAC address value)

Wake up Tag with R/C

Check Tag(EPD display(blank display))

both

two conditions should be all satisfied)

see ‘Black’

‘White’ display

Compare MAC address with that of label attached to

Front

or Back plane.

TAG Datasheet(ST

-GM42003N)

Proprietary and Confidential

13/21

or Back plane.

REV 1.0

Samsung Electro



Position

Wake up

NFC

S-

TAG Datasheet(ST

Samsung Electro

-Mechanics

Proprietary and Confidential

TAG Datasheet(ST

-GM42003N)

Proprietary and Confidential

14/21

REV 1.0

Samsung Electro

4 ESL Operation

by display

It will be updated before 2

nd

release.

Display

S-

TAG Datasheet(ST

Samsung Electro

-Mechanics

Proprietary and Confidential

by display

release.

Below is just a sample.

State

User Action

STATE: 1

Initial display when shipped

from the manufacturer

(Tag version, MAC address).

None

STATE: 1

No change.

To assign a tag using a PDA

STATE 1  2

Searching for GWs

(Tag version, MAC address

and triangle).

A tag woken up by an RC

TAG Datasheet(ST

-GM42003N)

Proprietary and Confidential

15/21

User Action

To assign a tag using a PDA

A tag woken up by an RC

REV 1.0

Samsung Electro

S-

TAG Datasheet(ST

Samsung Electro

-Mechanics

Proprietary and Confidential

STATE 2



4

A tag is connected to a GW

and received price

(Price)

None

STATE 2



3

A tag failed to locate a GW

(Tag version, MAC address).

STATE 4



5

When a tag is connected to a

GW, and woken up by an RC,

Next page display predefined.

Display is end, tag wait 10

second wakeup signal by RC.

When signal is detected in

this time, immediately return

first Page and Send Price

Request to GW. No signal in

this time, after 10 second

return first Page and Same

Operation.

Woken up by an RC

STATE 4



6

Connection to a GW is lost

(price and Rectangle on

upper right corner)

None

TAG Datasheet(ST

-GM42003N)

Proprietary and Confidential

16/21

Woken up by an RC

REV 1.0

Samsung Electro

S-

TAG Datasheet(ST

Samsung Electro

-Mechanics

Proprietary and Confidential

STATE 6



6

When connection is lost and

woken up by an RC

(blinks with the price and

Rectangle)

Starts to search GWs.

Woken up by an RC

STATE 4



1

Initial display

(Tag version, MAC address)

To clear an ass

using a PDA

TAG Datasheet(ST

-GM42003N)

Proprietary and Confidential

17/21

Woken up by an RC

To clear an ass

igned tag

using a PDA

REV 1.0

Samsung Electro

5 Package

S-

TAG Datasheet(ST

Samsung Electro

-Mechanics

Proprietary and Confidential

TAG Datasheet(ST

-GM42003N)

Proprietary and Confidential

18/21

REV 1.0

Samsung Electro

6 C

autions for Treat

Provisions should be made to protect against any damage to the product caused by improper handling.

It is highly recommended that the product should be installed within

the logistics hub

. Recommended storage condition is in

This RF device operates on the 2.4GHz frequency band and can produce radio interference. The device,

therefore, may not be used for applicat

6.1

Usage Environment

Take extra cautions

when using this RF device in the vicinity of other electronic devices and appliances.

Most electronic devices and appliances use electromagnetic waves. Electromagnetic

RF device can affect other electronic devices and appliances.

If using the device in an explosion hazard area, follow all safety regulations, instructions, and signals.

6.2

Storage and Use



Moisture and liquids can damage internal parts

itself.



Do not place or store the product on a sloped surface. The product may slide and fall off the

surface and damaged.



Use the product in temperatures ranging from

used or stored under temperature extremes.



The display panel needs extra care when handling.

-

Do not apply any impacts on outside since e

-

Continuous exposure to excessive moisture (over 60% RH) or UV makes display

shortened.

-

Ghosting image may be appeared in temperature conditions of less than 15 Celsius degree.



Avoid areas with strong magnetism or subject to magnetism.

Contact between the device and a magnetic object can lead to malfunctions.

 Do not place

the product near heat

the vicinity of highly pressurized containers.

S-

TAG Datasheet(ST

Samsung Electro

-Mechanics

Proprietary and Confidential

autions for Treat

ment

Provisions should be made to protect against any damage to the product caused by improper handling.

It is highly recommended that the product should be installed within

3 months from the date

. Recommended storage condition is in

0-40 Celsius degree, 20-

60% RH environment.

This RF device operates on the 2.4GHz frequency band and can produce radio interference. The device,

therefore, may not be used for applicat

ions where safety of human lives is concerned.

Usage Environment

when using this RF device in the vicinity of other electronic devices and appliances.

Most electronic devices and appliances use electromagnetic waves. Electromagnetic

RF device can affect other electronic devices and appliances.

If using the device in an explosion hazard area, follow all safety regulations, instructions, and signals.

Moisture and liquids can damage internal parts

and circuit boards if allowed to enter into the device

Do not place or store the product on a sloped surface. The product may slide and fall off the

Use the product in temperatures ranging from

0 to +40

. Parts and circuits m

used or stored under temperature extremes.

The display panel needs extra care when handling.

Do not apply any impacts on outside since e

-Paper display is fragile.

Continuous exposure to excessive moisture (over 60% RH) or UV makes display

Ghosting image may be appeared in temperature conditions of less than 15 Celsius degree.

Avoid areas with strong magnetism or subject to magnetism.

Contact between the device and a magnetic object can lead to malfunctions.

the product near heat

-

producing kitchen appliances like a stove or a microwave or in

the vicinity of highly pressurized containers.

TAG Datasheet(ST

-GM42003N)

Proprietary and Confidential

19/21

Provisions should be made to protect against any damage to the product caused by improper handling.

3 months from the date

of arrival in

60% RH environment.

This RF device operates on the 2.4GHz frequency band and can produce radio interference. The device,

ions where safety of human lives is concerned.

when using this RF device in the vicinity of other electronic devices and appliances.

Most electronic devices and appliances use electromagnetic waves. Electromagnetic

waves emitted by this

If using the device in an explosion hazard area, follow all safety regulations, instructions, and signals.

and circuit boards if allowed to enter into the device

Do not place or store the product on a sloped surface. The product may slide and fall off the

. Parts and circuits m

ay be damaged if

Continuous exposure to excessive moisture (over 60% RH) or UV makes display

lifetime

Ghosting image may be appeared in temperature conditions of less than 15 Celsius degree.

Contact between the device and a magnetic object can lead to malfunctions.

producing kitchen appliances like a stove or a microwave or in

REV 1.0

Samsung Electro



External impact to the product, such as from being dropped, can damage the

casing can be separated.



Twis

ting and bending the product can damage the exterior casing and the internal components.



If this product operates abnormally in eliminating battery vinyl or replacing battery, you should

discharge it by contacting battery terminal (+) and (



This product

uses 2.4GHz frequency band for wireless communication network. Radio

communications can be limited or affected by other applications which share same frequency band,

such as WiFi, Bluetooth, Zigbee, etc.



Frequent

communications, updates and screen renewal



6.3

Battery Replacement

Audience

Authorized persons with the following knowledge are allowed to replace the battery.

- . Battery / -. Elec

tronic assemblies like circuit board

Note : If not authorized person, it will not give any warranty.

(When

need to replace the battery.

Instructions

-

Risk of short circuit if battery is incorrectly

-

Keep attention that your hands are dry before you start with replacement

- Keep a

way batteries from children and infants.

- Don’

t heat, charge, bend, drop, short

- Don’t mix

the used battery together with the new battery or different type of batteries.

Note : Battery rarely has a little stain or leak.

Steps

Open the battery cover

.

Take out the batteries.

Put in the new batteries

Check the batteries direction.

Put the battery cover.

S-

TAG Datasheet(ST

Samsung Electro

-Mechanics

Proprietary and Confidential

External impact to the product, such as from being dropped, can damage the

ting and bending the product can damage the exterior casing and the internal components.

If this product operates abnormally in eliminating battery vinyl or replacing battery, you should

discharge it by contacting battery terminal (+) and (

-).

uses 2.4GHz frequency band for wireless communication network. Radio

communications can be limited or affected by other applications which share same frequency band,

such as WiFi, Bluetooth, Zigbee, etc.

communications, updates and screen renewal

s may

reduce battery life time.

Battery Replacement

Authorized persons with the following knowledge are allowed to replace the battery.

tronic assemblies like circuit board

/ -

. Compliance of the instruction

Note : If not authorized person, it will not give any warranty.

need to replace the battery.

P

lease contact authorized person and get instructions.)

Risk of short circuit if battery is incorrectly

installed/stored.

Keep attention that your hands are dry before you start with replacement

way batteries from children and infants.

t heat, charge, bend, drop, short

-circuit and disassemble battery.

the used battery together with the new battery or different type of batteries.

Note : Battery rarely has a little stain or leak.

.

Put in the new batteries

.

Check the batteries direction.

[View] Top : (+)

Positive

Bottom : (-)

Negative

TAG Datasheet(ST

-GM42003N)

Proprietary and Confidential

20/21

External impact to the product, such as from being dropped, can damage the

product or battery

ting and bending the product can damage the exterior casing and the internal components.

If this product operates abnormally in eliminating battery vinyl or replacing battery, you should

uses 2.4GHz frequency band for wireless communication network. Radio

communications can be limited or affected by other applications which share same frequency band,

reduce battery life time.

Authorized persons with the following knowledge are allowed to replace the battery.

. Compliance of the instruction

lease contact authorized person and get instructions.)

the used battery together with the new battery or different type of batteries.

(+) (+)

Battery directional

(+)

Positive

Negative

REV 1.0

Samsung Electro

6.4

FCC

FCC ID : E2X-ST-GM42003N

WARNING : This equipment m

ay generate or use radio frequency energy. Changes or modifications to

this equipment may cause harmful interference unless the modifications are expressly approved in the

instruction manual. The user could lose the authority to operate this equipment if a

or modification is made.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

r

eceived, Including interference that may cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonab

harmful interference in a residential installation This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio commu

nications, However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the us

the interference by one or more of the following measures:

-

Reorient or relocate the receiving antenna.

-

Increase the separation between the equipment and receiver.

-

Connect the equipment into an outlet on a circuit

-

Consult the dealer or an experienced radio/TV technician for help.