Samsung Electro Mechanics SWB-A52H Wi-Fi Module User Manual SWB A51H Datasheet Preliminary

Samsung Electro Mechanics Wi-Fi Module SWB A51H Datasheet Preliminary

Contents

Users Manual

Samsung Electro-Mechanics Proprietary and Confidential 1/15 SWB-A52H Manual Atheros AR6003X WLAN Solution Samsung Electro-Mechanics Summary This manual presents the general information and user guide of SWB-A52H IEEE 802.11a/b/g/n Wireless LAN. © 2012 Samsung Electro-Mechanics. All rights reserved The names of actual companies and products mentioned herein may be the trademarks of their respective owners. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the express written consent of Samsung Electro-Mechanics. This document is subject to change without notice.
Samsung Electro-Mechanics Proprietary and Confidential 2/15 Table of Contents 1 GENERAL DESCRIPTION .................................................................................................... 3 1.1 FUNCTIONAL DESCRIPTION ....................................................................................................... 3 1.2 FEATURES ............................................................................................................................ 3 2 ELECTRICAL CHARACTERISTICS ........................................................................................ 5 2.1 DC CHARACTERISTICS ............................................................................................................. 5 3 RF SPECIFICATIONS .......................................................................................................... 6 3.1 RECEIVER RF SPECIFICATIONS FOR 2.4GHZ ................................................................................. 6 3.2 RECEIVER RF SPECIFICATIONS FOR 5GHZ .................................................................................... 7 3.3 TRANSMITTER RF SPECIFICATIONS FOR 2.4GHZ ............................................................................ 8 3.4 TRANSMITTER RF SPECIFICATIONS FOR 5GHZ ............................................................................... 9 4 ADDITIONAL INFORMATION ........................................................................................... 10 4.1 HOST INTERFACE CONFIGURATIONS .......................................................................................... 10 4.2 REFERENCE AND SLEEP CLOCK ................................................................................................. 12
Samsung Electro-Mechanics Proprietary and Confidential 3/15 1 General Description 1.1 Functional Description SWB-A52H is the RF module that integrates Wireless LAN (WLAN). This embedded module is optimized for WLAN enabled handheld mobile devices. 1.2 Features  IEEE Std 802.11a/b/g, 802.11n(1x1), HT=20/40 (HT=40, 5GHz ONLY)  WiFi direct support for2.4GHz only Includes all the baseband and radio functionality, from host interface up to antenna, needs only external antenna  Small dimensions (9.0 x 9.5 x 1.2 mm) with an LGA – 64pin peripheral footprint  Cellular coexistence supported  Host interfaces: SDIO, GSPI for WLAN.  RoHS compliant  MSL3 1.2.1 Radio Transceiver  Frequency of Operation: 2412 – 2472 MHz, 5180 – 5320 MHz, 5500 – 5700 MHz, 5745 – 5825 MHz  Fully compliant with IEEE 802.11a/b/g, 802.11n 1x1  Receiver sensitivity (< 8% PER) at 11 Mbit/sec data rate: -90dBm  Receiver sensitivity (< 10% PER) at 54 Mbit/sec data rate: -75dBm @ 11g  Receiver sensitivity (< 10% PER) at 54 Mbit/sec data rate: -74 dBm @ 11a  Receiver sensitivity (< 10% PER) at HT20, MCS7, 2.4GHz : -72dBm  Receiver sensitivity (< 10% PER) at HT20, MCS7, 5GHz : -71 dBm  Blocking filter for suppression of CDMA, GSM, PCS and WCDMA interfering signals  Transmitter output power in 802.11b mode at 1~11Mbps: 13dBm  Transmitter output power in 802.11g mode at 6~54Mbps: 13dBm  Transmitter output power in 802.11a mode at 6~54Mbps: 13dBm  Transmitter output power in 802.11n mode at HT20, 2.4GHz, MCS0~MCS7: 13dBm  Transmitter output power in 802.11n mode at HT20, 5GHz, MCS0~MCS6: 13dBm  Transmitter output power in 802.11n mode at HT40, 5GHz, MCS0~MCS5/MCS6: 13dBm/12dBm 1.2.2 Applications  Smart phone/feature phones with embedded WLAN connectivity
Samsung Electro-Mechanics Proprietary and Confidential 4/15  Tablet PC with embedded WLAN connectivity  Personal digital assistants (PDA)  SDIO WLAN Network Interface Cards (NIC)  Voice over IP (VoIP) cordless phones  Mobile gaming devices  Portable media players (PMP) including networked MP3 player  Networked digital camera and photo frames  Digital media adapter and receiver  Networked TV, set-top box, DVD recorder, personal video recorder (PVR), media drive, and other consumer electronics appliances
Samsung Electro-Mechanics Proprietary and Confidential 5/15 2 Electrical Characteristics 2.1 DC Characteristics 2.1.1 Absolute Maximum Ratings Symbol(Domain) Parameter Max Rating Unit WLAN VREG Digital 1.8V supply -0.3 to 2.5 V AVDD18 Analog 1.8V supply -0.3 to 2.5 V DVDD_SDIO SDIO I/O supply -0.3 to 4.0 V DVDD_SOC1 GPIO I/O supply -0.3 to 4.0 V DVDD_SOC2 GPIO I/O supply -0.3 to 4.0 V VDD33 3.3V supply -0.3 to 4.0 V VBATT External PA supply -0.3 to 4.8 V PAREG_BASE PAREG input -0.3 to 4.0 V 2.1.2 Recommended Operating Conditions Symbol(Domain) Parameter Min. Nom Max Unit WLAN VREG Digital 1.8V supply 1.71 1.8 1.89 V AVDD18 Analog 1.8V supply 1.71 1.8 1.89 V DVDD_SDIO SDIO I/O supply 1.71 3.46 V DVDD_SOC1 GPIO0 I/O supply 1.71 3.46 V DVDD_SOC2 GPIO1 I/O supply 1.71 3.46 V VDD33 3.3V supply 3.14 3.3 3.46 V VBATT External PA supply 3.14 3.3 4.2 V PAREG_BASE PAREG input 3.14 3.3 3.46 V
Samsung Electro-Mechanics Proprietary and Confidential 6/15 3 RF Specifications All measurements are made under nominal supply voltage and room temperature conditions. 3.1 Receiver RF Specifications for 2.4GHz Parameter Conditions Min. Nom. Max. Unit Minimum receiver sensitivity in 802.11b mode 1Mbps PER<8%, Packet size= 1024bytes -80 dBm 2Mbps -80* dBm 5.5Mbps -76 dBm 11Mbps -90 -76* dBm Minimum receiver sensitivity in 802.11g mode 6Mbps PER<10%, Packet size= 1000bytes -82* dBm 9Mbps -81* dBm 12Mbps -79* dBm 18Mbps -77* dBm 24Mbps -74* dBm 36Mbps -70* dBm 48Mbps -66* dBm 54Mbps -75 -65* dBm Minimum receiver sensitivity in 802.11n mode HT20, MCS7, 1stream, 1Tx, 1Rx PER<10% -72 -64* dBm Maximum input signal level 802.11b mode PER<8% -10* dBm 802.11g mode PER<10% -20* dBm 802.11n mode PER<10% -20* dBm "*" indicates IEEE 802.11 standard specifications
Samsung Electro-Mechanics Proprietary and Confidential 7/15 3.2 Receiver RF Specifications for 5GHz Parameter Conditions Min. Nom. Max. Unit Minimum receiver sensitivity in 802.11a mode 6Mbps PER<10%, Packet size= 1000bytes -82* dBm 9Mbps -81* dBm 12Mbps -79* dBm 18Mbps -77* dBm 24Mbps -74* dBm 36Mbps -70* dBm 48Mbps -66* dBm 54Mbps -74 -65* dBm Minimum receiver sensitivity in 802.11n mode HT20, MCS7, 1stream, 1Tx, 1Rx PER<10% -71 -64* dBm Maximum input signal level 802.11a mode PER<10% -30* dBm 802.11n mode PER<10% -30* dBm "*" indicates IEEE 802.11 standard specifications
Samsung Electro-Mechanics Proprietary and Confidential 8/15 3.3 Transmitter RF Specifications for 2.4GHz Parameter Conditions Min. Nom. Max. Unit Linear output power in 802.11b mode Output power@1~11Mbps As specified in IEEE802.11 10 13 15 dBm Linear output power in 802.11g mode Output power@6~36Mbps As specified in IEEE802.11 10 13 15 dBm Output power@48Mbps 10 13 15 dBm Output power@54Mbps 10 13 15 dBm Linear output power in 802.11n mode Output power@HT20,MCS0 ~ MCS7 10 13 15 dBm Transmit spectrum mask Margin to 802.11b spectrum mask Maximum output power 0 dBr Margin to 802.11g spectrum mask 0 dBr Margin to 802.11n spectrum mask 0 dBr Transmit modulation accuracy in 802.11b mode 1Mbps As specified in IEEE802.11b - 35 % 2Mbps - 35 % 5.5Mbps - 35 % 11Mbps - 35 % Transmit modulation accuracy in 802.11g mode 6Mbps Mandatory - -5 dB 9Mbps Option - -8 dB 12Mbps Mandatory - -10 dB 18Mbps Option - -13 dB 24Mbps Mandatory - -16 dB 36Mbps Option - -19 dB 48Mbps Option - -22 dB 54Mbps Option - -29 -25 dB Transmit modulation accuracy in 802.11n mode HT20, MCS0~MCS6 dB HT20,MCS7 -31* -28 dB Transmit power-on and power-down ramp time in 802.11b mode Transmit power-on ramp time from 10% to 90% output power 2 usec Transmit power-down ramp time from 90% to 10% output power 2 usec * The method of full-packet estimation is applied.
Samsung Electro-Mechanics Proprietary and Confidential 9/15 3.4 Transmitter RF Specifications for 5GHz Parameter Conditions Min. Nom. Max. Unit Linear output power in 802.11a mode Output power@6~36Mbps As specified in IEEE802.11 10 13 16 dBm Output power@48Mbps 10 13 16 dBm Output power@54Mbps 10 13 16 dBm Linear output power in 802.11n mode Output power@HT20,MCS0 ~ MCS6 10 13 16 dBm Output power@HT20,MCS7* 7 10 13 dBm Output power@HT40,MCS0 ~ MCS5 10 13 16 dBm Output power@HT40,MCS6 9 12 15 dBm Output power@HT40,MCS7* 6 9 12 dBm Transmit spectrum mask Margin to 802.11a spectrum mask Maximum output power 0 dBr Margin to 802.11n spectrum mask 0 dBr Transmit modulation accuracy in 802.11a mode 6Mbps Mandatory - -5 dB 9Mbps Option - -8 dB 12Mbps Mandatory - -10 dB 18Mbps Option - -13 dB 24Mbps Mandatory - -16 dB 36Mbps Option - -19 dB 48Mbps Option - -22 dB 54Mbps Option - -29 -25 dB Transmit modulation accuracy in 802.11n mode HT20,MCS0~MCS5 dB HT20,MCS6 -29 -25 dB <Notice> By enabling Full packet Estimation and changing Bias setting, AR6003X & SWB-A51H can pass -28dB EVM target on MCS7. (The detailed information is furnished by QCA.)
Samsung Electro-Mechanics Proprietary and Confidential 10/15 4 Additional Information 4.1 Host Interface Configurations 4.1.1 WLAN Mode setting HMODE0 Configuration High (DVDD_SOC2) SDIO Mode GND GSPI Mode Figure 4-1 SDIO 2.0 timing Figure 4-2 GSPI timing
Samsung Electro-Mechanics Proprietary and Confidential 11/15 SDIO Timing Constraints Parameter Description Min. Max. Unit Note fPP Clock frequency data transfer mode 0 50 MHz 40pF ≥ CL tWL Clock low time 7 - ns 40pF ≥ CL tWH Clock high time 7 - ns 40pF ≥ CL tTLH Clock rise time - 10 ns 40pF ≥ CL tTHL Clock fall time - 10 ns 40pF ≥ CL tISU Input setup time 6 - ns 40pF ≥ CL tIH Input hold time 2 - ns 40pF ≥ CL tOH Output hold time 2.5 - ns 40pF ≥ CL tO_DLY (min) Output delay time during data transfer mode 0 14 ns 40pF ≥ CL GSPI Timing Constraints Parameter Description Min. Max. Unit Note fPP Clock frequency 0 48 MHz tWL Clock low time 8.3 - ns tWH Clock high time 8.3 - ns tTLH Clock rise time - 2 ns tTHL Clock fall time - 2 ns tISU Input setup time 5 - ns tIH Input hold time 5 - ns tO_DLY Output delay 0 5 ns
Samsung Electro-Mechanics Proprietary and Confidential 12/15 4.2 Reference and Sleep Clock 4.2.1 Optional External 32KHz Input Clock The 32KHz clock is used in low-power modes such as IEEE power-save and sleep. The SWB-A51H does not require an external 32KHz clock. By default, the SWB-A51H will utilize its internal 32KHz clock. If the end application has a more accurate 32KHz clock, then it can be supplied externally via the WIFI_CLK_32K pin. The WIFI_CLK_32K input clock timing and voltage requirements are shown below. Figure 4-5 WIFI_CLK_32K pin Input clock timing Symbol Description Min. Nom. Max. Unit CK1 Frequency - 32.768 - kHz CK2 Fall Time 1 - 100 ns CK3 Rise Time 1 - 100 ns CK4 Duty Cycle (High-to-Low Ratio) 15 - 85 % CK5 Frequency Stability -50 - 50 ppm CK6 Input High Voltage V CK7 Input Low Voltage V 4.2.2 Reference Clock for WLAN WIFI_XTALI and WIFI_XTALO are the pins used for the reference clock. The reference clock is the primary clock source for the SWB-A51H. SWB-A51H supports 26MHz by default frequency. and it can support 19.2/24/26/38.4/40/52MHz reference clock. Reference clock source may come from either an external crystal or oscillator/TCXO source. Three hardware solutions are used for the reference clock - External crystal option <Note> SEMCO recommend the below Crystal (CL=15PF) or equivalent ITTI : 14340159-26.000MHz SEMCO : SQ3D02600Y2JBA, SQBD02600Y2QCG, SQ2D02600Y2JCG, HOSONIC : E1AB26.0000F15G11
Samsung Electro-Mechanics Proprietary and Confidential 13/15 NDK : EXS00A-CS04255 (NX2520_26MHz) HARMONY : X3S026000BF1S KDS : ZK05956 - External reference clock option (i.e. XO, VCXO, or VCTCXO) - Host reference drive option External Crystal Requirements Parameter Min. Nom. Max. Unit Frequency - 26 - MHz Frequency Stability -20 - 20 ppm Effective series resistance (ESR) - 100 Ohm Capacitance (CL) pF The external reference clock option or host reference drive option voltage requirements are shown below. Figure 4-6 External reference clock option or Host reference drive option Symbol Description Min. Nom. Max. Unit CK2 Fall Time - - 0.1*Period ns CK3 Rise Time - - 0.1*Period ns CK4 Duty Cycle (High-to-Low Ratio) 40 - 60 % CK5 Frequency Stability -20 - 20 ppm CK6 Input High Voltage 0.75 3.46 V CK7 Input Low Voltage V When using a TCXO, the clock signal is input at the WIFI_XTALO pin and must be AC-coupled using a 10nF capacitor. The WIFI_XTALI pin must be tied to GND when using a TCXO
Samsung Electro-Mechanics Proprietary and Confidential 14/15 FCC Notice  Host device of the approved module shall be marked with the following item: Contains Transmitter Module FCC ID: E2XSWB-A52H or Contains FCC ID: E2XSWB-A52H 5.15- 5.25 GHz band is restricted to indoor operations only. Compliance with FCC requirement 15.407(c) Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinues transmission in case of either absence of information to transmit or operational failure. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION  Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. When installing it in a mobile equipment This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it deemed to comply without
Samsung Electro-Mechanics Proprietary and Confidential 15/15 maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).

Navigation menu