Samsung Electronics Co 705SC Single-Band PCS GSM/ EDGE Phone with Bluetooth User Manual

Samsung Electronics Co Ltd Single-Band PCS GSM/ EDGE Phone with Bluetooth Users Manual

Users Manual

Download: Samsung Electronics Co 705SC Single-Band PCS GSM/ EDGE Phone with Bluetooth User Manual
Mirror Download [FCC.gov]Samsung Electronics Co 705SC Single-Band PCS GSM/ EDGE Phone with Bluetooth User Manual
Document ID702296
Application IDAUXFXdh5OgvSEJ/XIeGBUg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize78.2kB (977458 bits)
Date Submitted2006-09-07 00:00:00
Date Available2006-10-22 00:00:00
Creation Date2006-09-07 11:03:48
Producing SoftwareAdobe Acrobat 6.0
Document Lastmod2006-09-07 13:09:28
Document TitleUsers Manual
Document CreatorAdobe Acrobat 6.0

* Depending on the software installed or your service provider or country, some of the descriptions
in this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear different from the
illustrations in this guide.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-xxxxxA
English (EU). 08/2006. Rev. 1.0
705SC
User’s Guide
Use road safety at all times
Do not use a hand-held phone while driving.
Park the vehicle first.
Switch off the phone when refuelling
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Do not use the phone at a refuelling point
(service station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference.
Using them in an aircraft is both illegal and
dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be
using equipment that could be sensitive to
external radio frequency energy. Follow any
regulations or rules in force.
Interference
All wireless phones may be subject to
interference, which could affect their
performance.
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger.
Use only Samsung-approved batteries and
accessories, such as headsets and PC data cables.
Use of any unauthorised accessories could damage
you or your phone and may be dangerous.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
• The phone could explode if the battery is replaced
with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
At very high volume, prolonged listening to
a headset can damage your hearing.
Emergency calls
Qualified service
Key in the emergency number for your present
location, then press
Only qualified service personnel may repair your
phone.
Keep your phone away from small children
For more detailed safety information, see "Health
and safety information" on page 90.
Keep the phone and all its parts, including
accessories, out of the reach of small children.
Important safety precautions
Be aware of special regulations
About this Guide
•
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful
attention to the subsequent
information regarding safety or phone
features.
Indicates that you can get more
information on the referenced page.
→
Indicates that you need to press the
Navigation keys to scroll to the
specified option and then select it.
< >
Indicates a key on the phone.
For example, [ ]
Indicates a soft key, whose function is
displayed on the phone screen. For
example, , , or
[Centre] to confirm the
function displayed or option
highlighted.
Back
Get started
Select
Select an
option
4. To exit, choose either of the
following methods:
• Press  to move
up one level.
• Press [ ] to return to
Idle mode.
Press the left soft
key to select the
highlighted option.
Press the right soft
key to return to
the previous menu
level.
Use shortcuts
Press the number key
corresponding to the option you
want.
11
Get started
Customise your phone
Display
language
6. Press  and select
Save.
1. In Idle mode, press 
and select Settings → Phone
settings → Phone language
→ Screen text.
To select the sound profile:
1. In Idle mode, press 
and select Settings → Phone
settings → Phone profiles.
2. Select a language.
2. Select the profile you want.
3. Press  and select
Save.
Call ringer
melody
You can change the call ringer by
changing the properties of the
currently active sound profile.
To change the profile properties:
1. In Idle mode, press 
and select Settings → Phone
settings → Phone profiles.
2. Scroll to the sound profile you
are using.
3. Press  and select
Edit.
4. Select Voice call ringtone
→ Use my ringtone →
Sounds & Ringtones → a
ringer for voice calls.
5. Select Video call ringtone
→ Use my ringtone →
Sounds & Ringtones → a
ringer for video calls.
12
Idle mode
wallpaper
You can set wallpaper for the idle
screen.
To select a wallpaper image:
1. In Idle mode, press 
and select My files →
Pictures.
2. Select an image.
3. Press  and select
Set as → Main display.
4. Press .
To display the selected wallpaper
image:
1. In Idle mode, press 
and select Settings →
Display settings → Main
display → Wallpaper.
2. Select Pictures.
Silent profile
Make/Answer calls
Make a call
1. Enter an area code and
phone number.
2. Press [
You can protect the phone
against unauthorised use with a
phone password. The phone will
require the password on powerup.
].
3. To end the call, press [
].
To make a video call:
1. Enter an area code and
phone number.
1. In Idle mode, press 
and select Settings →
Security → Change phone
password.
2. Enter the default password,
00000000, and press
.
To make a voice call:
Get started
Phone lock
You can quickly activate the
Silent profile to avoid disturbing
other people.
Press and hold [ ] in Idle mode.
2. Press [ ] and if their phone
is compatible, and the other
person appears on the
screen.
Answer a call
3. Enter a new 4- to 8-digit
password and press
.
1. When the phone is ringing,
press [ ].
4. Enter the new password
again and press .
2. For a video call, when a
“Allow own picture to be
shown” message appears,
select Yes to allow the other
person to see you.
5. Select Phone lock.
3. To end the call, press [
].
6. Select Enable.
7. Enter the password and press
.
Adjust the
volume during
a call
Press [ / ].
13
Step outside the phone
Begin with your camera, web browser, and other special
features
Record a video
2. Press [1] to switch to Record
mode.
Use camera
Take a photo
3. Press [
1. Open the phone.
2. In Idle mode, press and hold
[ ] to turn on the camera.
4. Press [ ] to take a photo.
The photo is saved
automatically.
5. Press <
photo.
> to take another
1. In Idle mode, press 
and select My files →
Pictures.
2. Select the photo you want.
14
] to start recording.
4. Press [ ] to stop recording.
The video is saved
automatically.
5. Press  to record
another video.
3. Aim the lens at the subject
and make any desired
adjustments.
View a photo
1. In Idle mode, press and hold
[ ] to turn on the camera.
Play a video
1. In Idle mode, press 
and select My files →
Videos.
2. Select the video you want.
Play music
Copy media
files to the
phone
1. In Idle mode, press 
and select Media player.
2. Scroll to the Music tab.
3. Press  and select
Create playlist.
4. Enter a name for the play list
and press .
5. Select the play list you just
created.
6. Press  and select
Add → Playlist or Files.
7. Select a play list, or specific
the files you want and press
.
Play music files
Step outside the phone
Create a play
list
Use these methods:
• Download from the wireless
webp. 31
• Download from a computer
using the optional Samsung
PC StudioSamsung PC
Studio User’s Guide
• Receive via Bluetooth
 p. 82
• Copy to a memory card and
insert the card into the
phone.p. 21
1. Select the file you want to
play.
2. During playback, use the
following keys:
• Centre: pauses or
resumes playback.
• Up: opens the play list.
• Left: moves back to the
previous file. Moves
backward in a file when
held down.
• Right: skips to the next
file. Skips forward in a file
when held down.
•
/ : adjusts the volume.
• Down: stops playback.
15
Step outside the phone
Browse the web
Use Contacts
Using a built-in web browser, you can easily access
the wireless web to get a variety of up-to-date
services and information and to download web
content.
Launch the
web browser
Navigate the
web browser
In Idle mode, press <
•
•
•
•
>.
To scroll through browser
items, press [Up] or [Down].
To select an item, press
[Centre] or  or .
Menu functions
To access this menu, press [OK] in Idle mode and
select Media player.
Creating a play list
During playback, use the following keys:
Key
Function
OK
Pauses or resumes playback.
Left
Returns to the previous file. Moves
backward in a file when held down.
Right
Skips to the next file. Skips forward in a
file when held down.
Up
Accesses the play list.
Down
Adjusts the volume.
Stops playback.
37
Menu functions
Using media player options
While playing a file, press  to access the
following options:
• Pause/Resume: pause or resume playback.
• Stop: stop playback.
• Transfer to Bluetooth stereo headset/
Transfer to phone: switch sound output to a
Bluetooth stereo headset or phone speaker.
• Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
• Open play list: access the play list.
• Activate key: get a new licence key when the
key for the selected DRM file expires.
• Reactivate key: get another licence key even
when the key for the selected DRM file has not
expired.
• Go to File Manager: access all music and video
files.
• Hidden from Bluetooth/Visible to Bluetooth:
hide the file so that other Bluetooth devices
cannot access it, or share the file with other
Bluetooth devices.
• Show controller/Hide controller: display or
hide the control bar of Media player.
• Details: access the file properties.
38
•
•
Player settings: change the default settings for
playing media files:
Play options: select a repeat mode.
Volume: select a volume level.
Controller: display or hide the controller image.
Audio player skin: select a skin image.
VOD settings: select a connection profile to be
used for accessing a video streaming server. You
can also create or edit a profile.p. 84
Using play list options
From the media player screen, press [Up]. Press
 to access the following options:
• Play via: play the selected file via the phone
speaker or a Bluetooth stereo headset.
• Add: add files to the play list.
• Remove: remove the selected file or all files
from the current play list.
• Move: move the selected file to the position you
want within the current play list or another play
list.
• Copy: make a copy of the selected file in the
current play list or another play list.
• New list: add a new play list.
Playing music files with the phone closed
Internet
Press and hold [
] to launch the media player and
start playback. Use the following keys to control the
media player:
The web browser on your phone allows you to
access the wireless web. Using the web browser, you
can access up-to-date information and a wide
variety of media contents, such as wallpapers,
ringtones, and music files.
Key
Function
Returns to the previous file. Moves
backward in a file when held down.
Go to homepage (Menu 4.1)
Skips to the next file. Skips forward in a
file when held down.
Use this menu to connect your phone to the network
and load the homepage of the wireless web service
provider.
Adjusts the volume.
Locks the exposed keys when held down
to keep accidental presses from affecting
playback.
Internet (Menu 4)
To access this menu, press [OK] in Idle mode and
select Internet.
Menu functions
Pauses or resumes playback. Closes the
media player when held down.
(Menu 4)
Navigating the web browser
To
Press
scroll through browser
items
[Up] or [Down].
select a browser item
[OK] or .
4. Press [OK] to save the time zone.
Calculator (Menu *.5)
Use this menu to perform basic arithmetic functions
such as addition, subtraction, multiplication, and
division.
Performing a calculation
1. Enter the first number.
Press [ ] to include a decimal point.
2. Press one of the Navigation keys to access the
math function you want.
3. Enter the second number.
4. Press [OK] to view the result.
5. If necessary, repeat from step 2 to continue the
calculation.
Using calculator options
Use this menu for common conversions, such as
currency and temperature.
Performing a conversion
1. Select a converter.
2. Press [Left] or [Right] to select the original unit
and press [Down].
3. Enter the value to be converted and press
[Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to
above zero (+) or below zero (-).
4. Press [Left] or [Right] to select the unit to which
you want to convert.
The equivalent value for the amount you entered
displays.
Tube map (Menu *.7)
You can view the tube maps of London, Paris, Milan,
and Berlin.
Using a map
1. Select a city.
2. Press the Navigation keys to move to different
sections of the map.
3. Press [OK] to zoom in on different sections of
the map.
Press  to zoom out.
Applications (Menu *)
Converter (Menu *.6)
Press  to access the following options:
• Clear: clear the current values.
• Reverse: reverse the conversion.
• Currency rates: display the currency rate list.
Menu functions
Press  to access the following options:
• Equal: view the result.
• Recent calculation: display the last result you
calculated.
• Save to memory: save a value into the
calculator memory.
• Recall memory: retrieve the saved value.
• Clear memory: clear the saved value.
Using converter options
Using tube map options
On the tube map screen, press  to
access the following options:
• Zoom in: zoom in on the map.
• Zoom out: zoom out.
• Search: search for the station you entered.
77
Menu functions
•
•
Settings: set the tube map settings.
Set default city: select a default tube map. If
you select Always ask, the phone will display
the city selection screen each time you access
this menu.
Map on: set whether the phone shows the
thumbnail on the enlarged map.
Help: view the help screen for reading the tube
map.
Alarms
(Menu 0)
Use this menu to set alarms to sound at specific
times. The alert type for a normal alarm corresponds
to the call alert type settings in the currently
selected profile. A wake-up alarm is not be affected
by your profile setting.
To access this menu, press [OK] in Idle mode and
select Alarms.
Setting an alarm
1. Select the type of alarm.
2. Set each alarm option:
• Alarm: activate the alarm.
• Time: enter the time for the alarm to sound.
• Repeat: select a repeat option.
• Alert tone: select an alarm tone.
3. Press  and select Save.
78
Stopping an alarm
When the time for an alarm comes and the alarm
sounds:
• For a non-wake-up alarm, press any key.
• For a wake-up alarm, press  or [OK].
Press any key, except for  and [OK], to
cause it to sound again after 5 minutes.
Deactivating an alarm
1. Select the alarm you want to deactivate.
2. Select Off on the Alarm line.
3. Press [OK].
Setting alarms to sound when the phone
is off
From the Alarms screen, select Auto power → On.
If the phone is off when it is time for the alarm to
sound, the phone switches on and sounds the alarm.
Settings
(Menu #)
The Settings menu provides you with various
setting options to customise the phone to your
preferences and needs. You can also reset the
settings to their default status.
•
•
Profiles (Menu #.1)
Editing a profile
1. Scroll to the profile you want.
2. Press  and select Edit.
3. Change the sound settings:
• Call alert type: select an alert type for the
call ringer.
• Voice call ringtone: select a ringtone for
voice calls.
• Video call ringtone: select a ringtone for
video calls.
• Tone volume: adjust the volume for the call
ringer.
• Message alert type: select an alert type for
the message ringer.
•
Settings (Menu #)
Your phone provides you with sound profiles that
allow you to quickly and easily change the sound
settings of the phone for different events or
situations. Use this menu to adjust the properties of
each profile and activate the profile you need.
Message alert tone: select a ringtone for
the message ringer.
Message alert repetition: select if the
phone repeatedly reminds you of a new
message.
Phone sounds: turn the various sounds on
the phone on or off:
All on: enable all tones.
Popup box alerts: set the phone to beep
when a pop-up window displays.
Power on/off: set the phone to beep when
you turn it on or off.
Folder open/close: set the phone to sound
when you open or close it.
Minute minder: set the phone to beep
every minute during an outgoing call to keep
you informed of the length of your call.
Call connect tone: set the phone to beep
when an outgoing call is connected to the
system.
Call end tone: set the phone to beep when a
call is disconnected by the other person or
due to a faded signal.
Alerts on call: set the phone to beep when
you receive a new message or when the time
for an alarm comes during a call.
Key tones: select a tone which sounds when
you press a key.
Menu functions
To access this menu, press [OK] in Idle mode and
select Settings.
•
79
Menu functions
•
Key tone volume: adjust the volume of the
key tones.
• Call answer mode: (For Car) select how to
answer an incoming call.
4. When you have finished, press  and
select Save.
Phone (Menu #.3)
Many different features of your phone’s system can
be customised to suit your preferences.
Language (Menu #.3.1)
From the profile list, select the profile you want.
Use this menu to select a language for the display
text or T9 input mode. If you select Automatic, the
phone uses the same language as the USIM/SIM
card.
Time & date (Menu #.2)
Shortcuts (Menu #.3.2)
Use this menu to change the time and date
displayed on your phone.
• Time: enter the current time. To select AM or PM
for 12-hour time format, press [Right].
• Date: enter the current date.
• Time format: select a time format.
• Date format: select a date format.
• Summer time: select to apply daylight saving
time.
• Auto update: activate the auto time update
feature. Your phone will read the MCC (Mobile
Country Code) from the network and
automatically update the current time for the
country that you are in when you travel abroad.
Time information may not be updated when
you move to one time zone to another within a
country.
You can use the Navigation keys as shortcut keys to
access specific menus directly from Idle mode. Use
this menu to assign a shortcut to a key.
Changing an active profile
80
Assigning a shortcut menu
1. Select a key to be used as a shortcut key.
2. Select a menu to be assigned to the key.
Using shortcut options
On the Shortcuts screen, press  to
access the following options:
• Assign: assign a shortcut menu.
• Change: change a shortcut menu assignment.
• Remove: deactivate the shortcut assignment to
the selected key.
• Remove all: deactivate all shortcut
assignments.
Active folder (Menu #.3.3)
Display (Menu #.4)
Use this menu to answer incoming calls by opening
the phone.
Use this menu to change settings for the display.
Anykey answer (Menu #.3.4)
].
Volume key (Menu #.3.5)
Use this menu to enter the greeting that is displayed
on the main display or external display.
Wallpaper (Menu #.4.2)
You can change the background image that is
displayed on the main display. You can select one of
the images in the Images folder, or create a photo
slide of your favourite image.
Key management (Menu #.3.6)
Calendar (Menu #.4.3)
Use this menu to manage the licence keys you have
acquired to activate media contents locked by DRM
systems.
Use this menu to display the calendar of the current
month on the idle screen.
Press  to access the following options:
• View: open the corresponding media item.
• Delete: delete the selected licence key.
• Go to My Messages: access the message that
contains the media content.
• Go to File manager: access the corresponding
file folder.
• Details: access the properties of the licence key.
Use this menu to select an image or enter text to be
displayed on the external display.
• Clock: select a clock type.
• Cover title: enter the text you want.
• Wallpaper: press  and select an
image. If necessary, select the portion of the
image to be displayed.
Cover keypad lock (Menu #.3.7)
Use this menu to lock the exposed keys to keep
accidental presses from affecting your phone’s
operation when the phone is closed.
Settings (Menu #)
Use this menu to set whether the phone mutes the
call ringer or rejects a call if you press and hold
[ / ] when a call comes in.
Menu functions
Use this menu to answer an incoming call by
pressing any key, except for  and [
Greeting message (Menu #.4.1)
Cover LCD (Menu #.4.4)
LCD brightness (Menu #.4.5)
Use this menu to adjust the brightness of the main
display.
81
Menu functions
Backlight (Menu #.4.6)
Diverting (Menu #.5.2)
You can select the length of time the backlight or
display stays on.
• On: select the length of time the backlight stays
on in times of inactivity.
• Dim: select the length of time the display stays
on in Dim mode after the backlight turns off.
After a specified time, the display turns off.
This network service reroutes incoming calls to a
different phone number that you specify.
1. Select the type of calls to be diverted.
2. Select a call diverting option:
• Always: divert all calls.
• Busy: divert calls when you are on another
call.
• No reply: divert calls when you do not
answer the phone.
• Unreachable: divert calls when you are not
in your service area or when your phone is
switched off.
• Cancel all: cancel all call diverting options.
3. Enter the number to which the calls will be
diverted in the Divert to line.
4. If you selected No reply, move to the Waiting
time line and select the length of time the
network delays before diverting a call.
5. Press  and select Activate. To
deactivate the call diverting, select Deactivate.
Dialling display (Menu #.4.7)
Use this menu to customise the settings for the
numbers entered and the background colour of the
display while dialling.
Touch light (Menu #.4.8)
Use this menu to turn on or off the backlight of the
media player control keys.
Call (Menu #.5)
Use this menu to set options for call functions.
Caller ID (Menu #.5.1)
This network service allows you to hide your phone
number from the person you are calling. If you
select By network, the phone will use the default
setting provided by the network.
Some networks do not allow the user to change
this setting.
82
Barring (Menu #.5.3)
This network service allows you to restrict your calls.
1. Select the type of calls to be barred.
2. Select a call barring option:
• All outgoing calls: prohibit all outgoing
calls.
•
Waiting (Menu #.5.4)
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which the call waiting
option will apply.
2. Press  and select Activate. To
deactivate the call waiting, select Deactivate.
Use this menu to make up to ten attempts to redial
a phone number after an unsuccessful call.
Closed user group (Menu #.5.6)
Use this menu to set incoming and outgoing calls to
be restricted to a selected user group (CUG). For
details about how to create a closed user group,
contact your service provider.
• Use user group: activate CUG index numbers.
• Outside access: enable calls to numbers other
than those in the Closed user group. This feature
depends on the nature of your CUG subscription.
• Default group: enable the default CUG, if you
have set one with your service provider. When
making a call, you are given the option of using
your default CUG, instead of selecting one from
the list.
• Group index: add, delete, or activate CUG
index numbers.
Settings (Menu #)
You can change the call barring password
obtained from your service provider. From the call
type list, press  and select Change
password.
Auto redial (Menu #.5.5)
Menu functions
Outgoing int’l calls: prohibit international
calls.
• Int’l calls exc. home: only allow calls to
numbers within the current country when you
are abroad, and to your home country.
• All incoming calls: prohibit incoming calls.
• Incoming calls when roaming: prohibit
incoming calls when you use your phone
outside of your home service area.
• Cancel all: cancel all call barring settings,
allowing calls to be sent and received
normally.
3. Enter the call barring password supplied by your
service provider.
4. Press  and select Activate. To
deactivate the call barring, select Deactivate.
Video call (Menu #.5.7)
Use this menu to change the default settings for
using the video call feature.
• Show me: change the video camera settings for
receipt of video calls:
Optionally: you can select whether or not the
video camera is used each time you answer a
video call.
Always: the camera is always used.
83
Menu functions
•
Retry by: set what to do when a video call does
not connect:
Voice call: the phone retries with a voice call.
Multimedia message: the phone will turn on
the camera and switch to Record mode so that
you can record a video and send it as an MMS
message.
None: the phone does not retry.
Connectivity (Menu #.6)
Use this menu to set options for connection available
on your phone.
Network (Menu #.6.1)
Use this menu to change the settings for connecting
to your cellular network.
• Network selection: select to either manually
select the network to be used when roaming
outside of your home area, or to let the network
be chosen automatically. You can select a
network other than your home network only if
there is a valid roaming agreement between the
two.
• Network mode: select the network you use:
Automatic: the phone scans for available
networks.
GSM 900/1800: the phone operates in the
combined GSM 900/1800 network.
84
GSM 1900: the phone operates in the GSM
1900 network. This option is only available in the
U.S.A.
UMTS: the phone operates in UMTS (3G
network) networks. You can get a higher speed
quality than on lower generation networks, and
use advanced data and information services,
such as video calls.
Connections (Menu #.6.2)
Use this menu to create and customise the profiles
containing the settings for connecting your phone to
the network. You need these settings to use the web
browser or send MMS messages or e-mails.
Your phone is set up by default for connecting to
the network. If you change the settings without
first checking with your service provider, the web
browser, MMS, and e-mail features may not work
properly.
Creating a profile
1. Press  and select New.
2. Specify profile parameters:
• Set name: enter a profile name.
• Access name: edit the access point name
used for the address of the GPRS network
gateway.
• Auth type: choose the type of
authentication used.
• User ID: enter the user ID.
•
•
•
•
•
•
Using profile options
From the profile list, press  to access the
following options:
• View: view the properties of the selected profile.
• Edit: edit the selected profile.
• New: add a new profile.
• Rename: change the profile name.
• Delete: delete the profile.
• Restore: restore the changed settings to the
default status.
You cannot edit or delete the default connection
profiles.
85
Settings (Menu #)
•
If you want the address to be automatically
assigned by the server, remove the check
mark.
Server 1/Server 2: enter the Domain Name
Server (DNS) addresses.
Traffic class: select the traffic class.
3. Press  to save the profile.
Menu functions
•
Password: enter the user password.
Protocol: select the protocol from among
WAP, HTTP, and Other.
Home URL: enter the URL address of the
page to be used as your homepage.
Gateway address: (WAP only) enter the
gateway address of the proxy server.
Proxy address/Port: (HTTP only) set the
proxy server address and port.
Secure connection: (WAP only) turn the
secure mode on or off.
Linger time (sec.): set a time period after
which the network is disconnected if there
has been no new data traffic in that time.
Advanced settings: provide you with the
following options:
Static IP: specify if you want to manually
enter an IP address; see the Local phone
IP option. If you want the IP address to be
automatically assigned by the server, remove
the check mark.
Local phone IP: enter the IP address
obtained from the network operator, if you
checked the Static IP option.
Static DNS: specify if you want to manually
enter the Domain Name Server (DNS)
address; see the Server 1/Server 2 option.
Menu functions
Application settings (Menu #.7)
Media player (Menu #.7.7)
You can customise the settings for using applications
available on the phone.
Use this menu to change the default settings for
playing media files in the media player.p. 38
Internet (Menu #.7.1)
VOD (Menu #.7.8)
Use this menu to select a connection profile to be
used for accessing the Internet. You can also create
or edit a profile.p. 84
Use this menu to activate a connection profile to be
used for accessing streaming servers to use VOD
(Video on Demand) services. You can also create or
edit a profile.p. 84
Messages (Menu #.7.2)
Use this menu to change the default settings for
using the messaging services.p. 51
Contacts (Menu #.7.3)
Use this menu to change the settings for using
Contacts.p. 36
Camera (Menu #.7.4)
Use this menu to change the default settings for
taking photos.p. 66
Video recorder (Menu #.7.5)
Use this menu to change the default settings for
recording videos.p. 68
Voice recorder (Menu #.7.6)
Use this menu to change the default settings for the
voice recorder.p. 76
86
Security (Menu #.8)
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and USIM/SIM card.
If you enter an incorrect PIN/PIN2 three times, the
USIM/SIM card is blocked. To unblock it, you need
to enter your PUK/PUK2 (Personal Unblocking
Key). The codes are supplied by your network
operator.
Phone lock (Menu #.8.1)
Use this menu to protect the phone from
unauthorised use. When this feature is enabled, you
must enter a 4- to 8-digit phone password each time
the phone is switched on.
The password is preset to 00000000. To change the
password, use the Change phone password
menu.
SIM lock (Menu #.8.2)
Change PIN code (Menu #.8.7)
This menu allows your phone to work only with the
current USIM/SIM by assigning a USIM/SIM lock
code. You must enter the USIM/SIM lock code to use
a different USIM/SIM card.
Use this menu to change your PIN. The PIN lock
feature must be enabled to change the PIN.
PIN lock (Menu #.8.3)
Fixed dialling mode (Menu #.8.4)
Change phone password (Menu #.8.5)
Use this menu to change your phone password.
Privacy lock (Menu #.8.6)
Use this menu to lock access to messages, media
files, Contacts entries, call logs, or calendar data.
When a privacy option is enabled, you must enter
the phone password to access the locked items.
Mobile tracker (Menu #.8.9)
When someone tries to use your phone with another
USIM/SIM card, the phone will automatically send
the preset tracking message to your family or
friends. You can check the phone number from
which the messages are sent and then track your
phone. This feature is useful when the phone is
stolen or lost.
Settings (Menu #)
If supported by your USIM/SIM card, Fixed Dialling
Number (FDN) mode restricts your outgoing calls to
a limited set of phone numbers. When this feature is
enabled, you can make calls only to phone numbers
stored on the USIM/SIM card.
If supported by your USIM/SIM card, use this menu
to change your current PIN2.
Menu functions
The 4- to 8-digit PIN (Personal Identification
Number) protects your USIM/SIM card against
unauthorised use. When this feature is enabled, the
phone requires your PIN each time it is switched on.
Change PIN2 code (Menu #.8.8)
Sending of the tracking message will be billed to
the user of the unauthorised USIM/SIM card. To
use your phone with any other USIM/SIM card,
you must first deactivate the Mobile tracker
feature.
1. Enter the phone password and press
.
2. Specify the following options:
• Activation: activate or deactivate the Mobile
tracker feature.
• Recipients: specify phone numbers to which
you want to send the tracking messages.
87
Menu functions
•
•
Sender: enter the sender’s name.
Messages: check the preset tracking
message text.
3. When you have finished, press .
4. Press  if you agree to the terms and
conditions of service listed on the screen.
Memory status (Menu #.9)
Use this menu to check the amount of memory
being used for storing data, such as messages,
media, calendar data, or contacts entries.
Operator settings (Menu #.0)
Use this menu to set a service provider according to
the SIM card you are using. When you select a
service provider, the phone will automatically turn
itself off and then back on. You can then see the
profiles corresponding to the service provider in the
connection menus.
This menu may not be shown depending on your
service provider.
88
Reset settings (Menu #.*)
Use this menu to reset the phone’s settings you
have changed and clear all data you have added.
1. Enter the phone password and press
.
The password is preset to 00000000. You can
change this password.p. 87
2. Press . The phone automatically turns
itself off and then back on.
Solve problems
Help and personal needs
To save the time and expense of an unnecessary
service call, perform the simple checks in this
section before contacting a service professional.
When you switch on your phone, the following
messages may appear:
“Please insert SIM card”
• Be sure that the USIM/SIM card is correctly
installed.
“Phone lock”
• The automatic locking function has been
enabled. You must enter the phone’s password
before you can use the phone.
“PIN lock”
• You are using your phone for the first time. You
must enter the PIN supplied with the USIM/SIM
card.
• The PIN lock feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN lock menu.
“PUK lock”
• The PIN code was entered incorrectly three
times, and the USIM/SIM card is now blocked.
Enter the PUK supplied by your service provider.
“No service,” “Network failure,” or “Not done”
displays
• The network connection has been lost. You may
be in a weak signal area. Move and try again.
• You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
You have entered a number but it was not
dialled
• Be sure that you have pressed [ ].
• Be sure that you have accessed the right cellular
network.
• Be sure that you have not set an outgoing call
barring option.
Your correspondent cannot reach you
• Be sure that your phone is switched on. ([ ]
pressed for more than one second.)
• Be sure that you are accessing the correct
cellular network.
• Be sure that you have not set an incoming call
barring option.
Your correspondent cannot hear you speaking
• Be sure that you have switched on the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is
located at the bottom of the phone.
89
The phone starts beeping and “Low battery”
flashes on the display
• Your battery is insufficiently charged. Recharge
the battery.
The audio quality of the call is poor
• Check the signal strength indicator on the
display (
). The number of bars indicates the
signal strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer
to a window if you are in a building.
No number is dialled when you re-call a
Contacts entry
• Use the Search contact feature to ensure the
number has been stored correctly.
• Re-store the number, if necessary.
The battery does not charge properly or the
phone sometimes turns itself off
• Wipe the charging contacts both on the phone
and on the battery with a clean soft cloth.
If the above guidelines do not help you to solve
the problem, take note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung aftersales service.
90
Health and safety information
Exposure to Radio Frequency (RF)
Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and
receiver. It is designed and manufactured not to
exceed the exposure limits for radio frequency (RF)
energy set by the Federal Communications
Commission (FCC) of the U.S. government. These
FCC exposure limits are derived from the
recommendations of two expert organizations, the
National Counsel on Radiation Protection and
Measurement (NCRP) and the Institute of Electrical
and Electronics Engineers (IEEE). In both cases, the
recommendations were developed by scientific and
engineering experts drawn from industry,
government, and academia after extensive reviews
of the scientific literature related to the biological
effects of RF energy.
The exposure limit set by the FCC for wireless
mobile phones employs a unit of measurement
known as the Specific Absorption Rate (SAR). The
SAR is a measure of the rate of absorption of RF
energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires
wireless phones to comply with a safety limit of 1.6
watts per kilogram (1.6 W/kg). The FCC exposure
limit incorporates a substantial margin of safety to
give additional protection to the public and to
account for any variations in measurements.
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power
levels so as to use only the power required to reach
the network. In general, the closer you are to a
wireless base station antenna, the lower the power
output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC
that it does not exceed the exposure limit
established by the FCC. Tests for each model phone
are performed in positions and locations (e.g. at the
ear and worn on the body) as required by the FCC.
91
The highest SAR values for this model phone as
reported to the FCC are Head: 1.33 W/Kg, Bodyworn: 0.975 W/Kg.
Non-compliance with the above restrictions may
result in violation of FCC RF exposure guidelines.
SAR information on this and other model phones can
be viewed on-line at www.fcc.gov/oet/fccid. This site
uses the phone FCC ID number, A3L705SC.
Sometimes it may be necessary to remove the
battery pack to find the number. Once you have the
FCC ID number for a particular phone, follow the
instructions on the website and it should provide
values for typical or maximum SAR for a particular
phone. Additional product specific SAR information
can also be obtained at www.fcc.gov/cgb/sar.
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
from wireless phones. The FDA publication includes
the following information:
Health and safety information
For body worn operation, this model phone has been
tested and meets the FCC RF exposure guidelines
whenused with a Samsung accessory designated for
this product or when used with an accessory that
contains no metal and that positions the handset a
minimum of 1.5 cm from the body.
Consumer Information on Wireless
Phones
What kinds of phones are the subject of this
update?
The term wireless phone refers here to hand-held
wireless phones with built-in antennas, often called
“cell,” “mobile,” or “PCS” phones. These types of
wireless phones can expose the user to measurable
radio frequency energy (RF) because of the short
distance between the phone and the user's head.
These RF exposures are limited by Federal
Communications Commission safety guidelines that
were developed with the advice of FDA and other
federal health and safety agencies. When the phone
is located at greater distances from the user, the
exposure to RF is drastically lower because a
person's RF exposure decreases rapidly with
increasing distance from the source. The so-called
“cordless phones,” which have a base unit connected
to the telephone wiring in a house, typically operate
at far lower power levels, and thus produce RF
exposures well within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that
any health problems are associated with using
92
Health and safety information
wireless phones. There is no proof, however, that
wireless phones are absolutely safe. Wireless
phones emit low levels of radio frequency energy
(RF) in the microwave range while being used. They
also emit very low levels of RF when in the stand-by
mode. Whereas high levels of RF can produce health
effects (by heating tissue), exposure to low level RF
that does not produce heating effects causes no
known adverse health effects. Many studies of low
level RF exposures have not found any biological
effects. Some studies have suggested that some
biological effects may occur, but such findings have
not been confirmed by additional research. In some
cases, other researchers have had difficulty in
reproducing those studies, or in determining the
reasons for inconsistent results.
What is FDA's role concerning the safety of
wireless phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as
wireless phones before they can be sold, as it does
with new drugs or medical devices. However, the
agency has authority to take action if wireless
phones are shown to emit radio frequency energy
(RF) at a level that is hazardous to the user. In such
a case, FDA could require the manufacturers of
wireless phones to notify users of the health hazard
and to repair, replace or recall the phones so that
the hazard no longer exists.
Although the existing scientific data do not justify
FDA regulatory actions, FDA has urged the wireless
phone industry to take a number of steps, including
the following:
• “Support needed research into possible biological
effects of RF of the type emitted by wireless
phones;
• “Design wireless phones in a way that minimizes
any RF exposure to the user that is not
necessary for device function; and
• “Cooperate in providing users of wireless phones
with the best possible information on possible
effects of wireless phone use on human health.
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at
93
The National Institutes of Health participates in
some interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications
Commission (FCC). All phones that are sold in the
United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA
and other health agencies for safety questions about
wireless phones.
FCC also regulates the base stations that the
wireless phone networks rely upon. While these
base stations operate at higher power than do the
wireless phones themselves, the RF exposures that
people get from these base stations are typically
thousands of times lower than those they can get
from wireless phones. Base stations are thus not the
primary subject of the safety questions discussed in
this document.
What are the results of the research done
already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws
in their research methods. Animal experiments
investigating the effects of radio frequency energy
(RF) exposures characteristic of wireless phones
have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies,
however, have suggested that low levels of RF could
accelerate the development of cancer in laboratory
animals. However, many of the studies that showed
increased tumor development used animals that had
been genetically engineered or treated with cancercausing chemicals so as to be pre-disposed to
develop cancer in absence of RF exposure. Other
studies exposed the animals to RF for up to 22 hours
per day. These conditions are not similar to the
conditions under which people use wireless phones,
so we don't know with certainty what the results of
such studies mean for human health.
Health and safety information
the federal level. The following agencies belong to
this working group:
• “National Institute for Occupational Safety and
Health
• “Environmental Protection Agency
• “Federal Communications Commission
• “Occupational Safety and Health Administration
• “National Telecommunications and Information
Administration
Three large epidemiology studies have been
published since December 2000. Between them, the
studies investigated any possible association
between the use of wireless phones and primary
brain cancer, glioma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland,
leukemia, or other cancers. None of the studies
demonstrated the existence of any harmful health
effects from wireless phones RF exposures.
However, none of the studies can answer questions
about long-term exposures, since the average
period of phone use in these studies was around
three years.
94
Health and safety information
What research is needed to decide whether
RF exposure from wireless phones poses a
health risk?
A combination of laboratory studies and
epidemiological studies of people actually using
wireless phones would provide some of the data that
are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large
numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one
exists. Epidemiological studies can provide data that
is directly applicable to human populations, but ten
or more years' follow-up may be needed to provide
answers about some health effects, such as cancer.
This is because the interval between the time of
exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many
years. The interpretation of epidemiological studies
is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones.
Many factors affect this measurement, such as the
angle at which the phone is held, or which model of
phone is used.
What is FDA doing to find out more about the
possible health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
95
FDA has been a leading participant in the World
Health Organization international Electromagnetic
Fields (EMF) Project since its inception in 1996. An
influential result of this work has been the
development of a detailed agenda of research needs
that has driven the establishment of new research
programs around the world. The Project has also
helped develop a series of public information
documents on EMF issues.
FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative
Research and Development Agreement (CRADA) to
do research on wireless phone safety. FDA provides
the scientific oversight, obtaining input from experts
in government, industry, and academic
organizations. CTIA-funded research is conducted
through contracts to independent investigators. The
initial research will include both laboratory studies
and studies of wireless phone users. The CRADA will
also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What steps can I take to reduce my exposure
to radio frequency energy from my wireless
phone?
If there is a risk from these products - and at this
point we do not know that there is - it is probably
very small. But if you are concerned about avoiding
even potential risks, you can take a few simple steps
to minimize your exposure to radio frequency
Again, the scientific data do not demonstrate that
wireless phones are harmful. But if you are
concerned about the RF exposure from these
products, you can use measures like those described
above to reduce your RF exposure from wireless
phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to
users of wireless phones, including children and
teenagers. If you want to take steps to lower
exposure to radio frequency energy (RF), the
measures described above would apply to children
and teenagers using wireless phones. Reducing the
time of wireless phone use and increasing the
distance between the user and the RF source will
reduce RF exposure.
Some groups sponsored by other national
governments have advised that children be
discouraged from using wireless phones at all. For
example, the government in the United Kingdom
distributed leaflets containing such a
recommendation in December 2000. They noted
that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their
recommendation to limit wireless phone use by
children was strictly precautionary; it was not based
on scientific evidence that any health hazard exists.
Health and safety information
energy (RF). Since time is a key factor in how much
exposure a person receives, reducing the amount of
time spent using a wireless phone will reduce RF
exposure.
• “If you must conduct extended conversations by
wireless phone every day, you could place more
distance between your body and the source of
the RF, since the exposure level drops off
dramatically with distance. For example, you
could use a headset and carry the wireless phone
away from your body or use a wireless phone
connected to a remote antenna.
Do hands-free kits for wireless phones
reduce risks from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason
to believe that hands-free kits reduce risks. Handsfree kits can be used with wireless phones for
convenience and comfort. These systems reduce the
absorption of RF energy in the head because the
phone, which is the source of the RF emissions, will
not be placed against the head. On the other hand,
if the phone is mounted against the waist or other
part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones
marketed in the U.S. are required to meet safety
requirements regardless of whether they are used
against the head or against the body. Either
configuration should result in compliance with the
safety limit.
96
Health and safety information
Do wireless phone accessories that claim to
shield the head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason
to believe that accessories that claim to shield the
head from those emissions reduce risks. Some
products that claim to shield the user from RF
absorption use special phone cases, while others
involve nothing more than a metallic accessory
attached to the phone. Studies have shown that
these products generally do not work as advertised.
Unlike “hand-free” kits, these so-called “shields”
may interfere with proper operation of the phone.
The phone may be forced to boost its power to
compensate, leading to an increase in RF
absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold
devices that claimed to protect wireless phone users
from radiation with making false and
unsubstantiated claims. According to FTC, these
defendants lacked a reasonable basis to substantiate
their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones
can interact with some electronic devices. For this
reason, FDA helped develop a detailed test method
to measure electromagnetic interference (EMI) of
implanted cardiac pacemakers and defibrillators
from wireless telephones. This test method is now
97
part of a standard sponsored by the Association for
the Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by FDA,
medical device manufacturers, and many other
groups, was completed in late 2000. This standard
will allow manufacturers to ensure that cardiac
pacemakers and defibrillators are safe from wireless
phone EMI. FDA has tested wireless phones and
helped develop a voluntary standard sponsored by
the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and
performance requirements for hearing aids and
wireless phones so that no interference occurs when
a person uses a compatible phone and a compatible
hearing aid at the same time. This standard was
approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones
for possible interactions with other medical devices.
Should harmful interference be found to occur, FDA
will conduct testing to assess the interference and
work to resolve the problem.
Additional information on the safety of RF exposures
from various sources can be obtained from the
following organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
•
•
•
•
•
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime.
But an important responsibility accompanies the
benefits of wireless phones, one that every user
must uphold.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, practice good common
sense and remember the following tips:
1. Get to know your wireless phone and its
features, such as speed dial and redial. If
available, these features help you to place your
call without taking your attention off the road.
2. When available, use a hands-free device. If
possible, add an additional layer of convenience
and safety to your wireless phone with one of the
many hands free accessories available today.
Health and safety information
•
Occupational Safety and Health Administration's
(OSHA):
http://www.osha.gov/SLTC/
radiofrequencyradiation/index.html
National institute for Occupational Safety and
Health (NIOSH):
http://www.cdc.gov/niosh/emfpg.html
World health Organization (WHO):
http://www.who.int/peh-emf/
International Commission on Non-Ionizing
Radiation Protection:
http://www.icnirp.de
National Radiation Protection Board (UK):
http://www.nrpb.org.uk
Updated 4/3/2002: US food and Drug
Administration
http://www.fda.gov/cellphones
98
Health and safety information
3. Position your wireless phone within easy reach.
Be able to access your wireless phone without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your
voice mail answer it for you.
4. Let the person you are speaking with know you
are driving; if necessary, suspend the call in
heavy traffic or hazardous weather conditions.
Rain, sleet, snow, ice and even heavy traffic can
be hazardous.
5. Do not take notes or look up phone numbers
while driving. Jotting down a “to do” list or
flipping through your address book takes
attention away from your primary responsibility,
driving safely.
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car
will be stationary. If you need to make a call
while moving, dial only a few numbers, check the
road and your mirrors, then continue.
7. Do not engage in stressful or emotional
conversations that may be distracting. Make
people you are talking with aware you are
driving and suspend conversations that have the
potential to divert your attention from the road.
8. Use your wireless phone to call for help. Dial 9-11 or other local emergency number in the case of
fire, traffic accident or medical emergencies.
Remember, it is a free call on your wireless
phone!
9. Use your wireless phone to help others in
emergencies. If you see an auto accident, crime
in progress or other serious emergency where
lives are in danger, call 9-1-1 or other local
emergency number, as you would want others to
do for you.
10. Call roadside assistance or a special nonemergency wireless assistance number when
necessary. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal,
a minor traffic accident where no one appears
injured, or a vehicle you know to be stolen, call
roadside assistance or other special nonemergency number.
“The wireless industry reminds you to use your
phone safely when driving.”
For more information, please call 1-888-901-SAFE,
or visit our web-site www.wow-com.com
99
Provided by the Cellular Telecommunications &
Internet Association
pacemaker to avoid potential interference with the
pacemaker.
Operating Environment
These recommendations are consistent with the
independent research and recommendations of
Wireless Technology Research.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
Using Your Phone Near Other Electronic
Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
Persons with pacemakers:
• should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone
is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to
minimize potential interference.
If you have any reason to suspect that interference
is taking place, switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives.
Health and safety information
Remember to follow any special regulations in force
in any area and always switch your phone off
whenever it is forbidden to use it, or when it may
cause interference or danger. When connecting the
phone or any accessory to another device, read its
user's guide for detailed safety instructions. Do not
connect incompatible products.
Other Medical Devices
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you
in obtaining this information. Switch your phone off
in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
100
Health and safety information
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should
also consult the manufacturer of any equipment that
has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted
notices require you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded
of the need to observe restrictions on the use of
radio equipment in fuel depots (fuel storage and
distribution areas), chemical plants or where
blasting operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust
101
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical emergencies,
for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 911 or other official
emergency number). Emergency numbers vary
by location.
3. Press
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular service
provider.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be
allowed to play with it because they could hurt
themselves and others, damage the phone or make
calls that increase your phone bill.
FCC Notice and Cautions
FCC Notice
• This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
• This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment
and receiver.
-Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV
technician for help
Health and safety information
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not cut off the call until given
permission to do so.
The phone may cause TV or radio interference if
used in close proximity to receiving equipment. The
FCC can require you to stop using the phone if such
interference cannot be eliminated.
Vehicles using liquefied petroleum gas (such as
propane or butane) must comply with the National
Fire Protection Standard (NFPA-58). For a copy of
this standard, contact the National Fire Protection
Association, One Battery march Park, Quincy, MA
02269, Attn: Publication Sales Division.
102
Health and safety information
Cautions
Changes or modifications made in the radio phone, not
expressly approved by Samsung, will void the user’s
authority to operate the equipment.
Only use approved batteries, antennas and
chargers. The use of any unauthorized accessories
may be dangerous and void the phone warranty if
said accessories cause damage or a defect to the
phone.
Although your phone is quite sturdy, it is a complex
piece of equipment and can be broken. Avoid
dropping, hitting, bending or sitting on it.
Other Important Safety Information
•
•
•
•
•
•
103
Only qualified personnel should service the
phone or install the phone in a vehicle. Faulty
installation or service may be dangerous and
may invalidate any warranty applicable to the
device.
Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag
or in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
Switch your phone off before boarding an
aircraft. The use of wireless phone in aircraft is
illegal and may be dangerous to the aircraft's
operation.
Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
Product Performance
If you're inside a building, being near a window may
give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15
minutes of searching, a Power Save feature is
automatically activated. If your phone is active, it
periodically rechecks service availability or you can
check it yourself by pressing any key.
Anytime the Power Save feature is activated, a
message displays on the screen. When a signal is
found, your phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and
receiver. When it's turned on, it receives and
transmits radio frequency (RF) signals. When you
use your phone, the system handling your call
controls the power level. This power can range from
0.006 watts to 0.2 watts in digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and
accessories. Faulty service may void the warranty.
There are several simple guidelines to operating
your phone properly and maintaining safe,
satisfactory service.
• Hold the phone with the antenna raised, fullyextended and over your shoulder.
• Try not to hold, bend or twist the phone's
antenna.
• Don't use the phone if the antenna is damaged.
• Speak directly into the phone's receiver.
Health and safety information
Getting the Most Out of Your Signal
Reception
The quality of each call you make or receive depends
on the signal strength in your area. Your phone
informs you of the current signal strength by
displaying a number of bars next to the signal
strength icon. The more bars displayed, the stronger
the signal.
104
Health and safety information
•
Avoid exposing your phone and accessories to
rain or liquid spills. If your phone does get wet,
immediately turn the power off and remove the
battery. If it is inoperable, call Customer Care for
service.
Availability of Various Features/Ring
Tones
Many services and features are network dependent
and may require additional subscription and/or
usage charges. Not all features are available for
purchase or use in all areas. Downloadable Ring
Tones may be available at an additional cost. Other
conditions and restrictions may apply. See your
service provider for additional information.
Battery Standby and Talk Time
Standby and talk times will vary depending on
phone usage patterns and conditions. Battery power
consumption depends on factors such as network
configuration, signal strength, operating
temperature, features selected, frequency of calls,
and voice, data, and other application usage
patterns.
Battery Precautions
•
•
105
Never use any charger or battery that is
damaged in any way.
Use the battery only for its intended purpose.
•
•
•
•
•
•
If you use the phone near the network's base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
Battery charging time depends on the remaining
battery charge and the type of battery and
charger used. The battery can be charged and
discharged hundreds of times, but it will
gradually wear out. When the operation time
(talk time and standby time) is noticeably
shorter than normal, it is time to buy a new
battery.
If left unused, a fully charged battery will
discharge itself over time.
Use only Samsung-approved batteries and
recharge your battery only with Samsungapproved chargers. When a charger is not in use,
disconnect it from the power source. Do not
leave the battery connected to a charger for
more than a week, since overcharging may
shorten its life.
Extreme temperatures will affect the charging
capacity of your battery: it may require cooling
or warming first.
Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and lifetime of
the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold
•
•
•
•
•
•
•
Care and Maintenance
•
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Keep the phone and all its parts and accessories
out of the reach of small children.
•
•
Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode
electronic circuits.
Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone's
electronic circuit boards.
Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
Do not paint the phone. Paint can clog the
device's moving parts and prevent proper
operation.
Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
Health and safety information
•
battery may temporarily not work, even when
the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below 0 °C
(32 °F).
Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and - terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
Dispose of used batteries in accordance with
local regulations. In some areas, the disposal of
batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion
batteries, contact your nearest Samsung
authorized service center. Always recycle. Do not
dispose of batteries in a fire.
106
Health and safety information
•
•
•
•
•
107
When the phone or battery gets wet, the label
indicating water damage inside the phone
changes color. In this case, phone repairs are no
longer guaranteed by the manufacturer's
warranty, even if the warranty for your phone
has not expired.
If your phone has a flash or light, do not use it
too close to the eyes of people or animals. This
may cause damage to their eyes.
Use only the supplied or an approved
replacement antenna. Unauthorized antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
Index
ABC mode, text input • 26
Active folder • 81
Alarm • 78
Answering
call • 27, 30
second call • 29
Anykey answer • 81
Auto redial • 83
Background image • 81
Backlight time, set • 82
Barring, calls • 82
Battery
charging • 7
low indicator • 8
precautions • 91
Bluetooth
receiving, data • 72
sending, data • 71
settings • 70
Broadcast messages • 50
Browser, web • 39
Calendar • 62
Call costs • 32
Call log
dialled • 32
missed • 31
received • 32
Call time • 33
Caller groups • 35
Caller ID • 82
108
Calls
answering • 27, 30
barring • 82
diverting • 82
holding • 28
making • 27
redialling • 27
rejecting • 27
transferring • 29
waiting • 83
Camera
photos • 65
videos • 68
Characters, enter • 25
Configuration messages • 47
Connection tone • 79
Contacts
adding • 34
editing • 33
finding • 33
options • 33
speed-dialling • 35
Creating messages
e-mail • 45
MMS with files • 46
MMS • 43
SMS • 42
CUG (Closed User Groups) • 83
Cyber pet • 72
Date, set • 80
Deleting
call log • 32
e-mail • 49, 50
MMS • 47
photos • 56, 67
SMS • 46, 50
video clips • 57, 69
Dialled calls • 32
Display
backlight, set • 82
brightness • 81
icons • 10
language • 80
layout • 10
settings • 81
Diverting, calls • 82
Document files • 60
DRM (Digital Rights Management) • 55
DTMF tones, send • 30
E-mails
creating/sending • 46
deleting • 49
settings • 53
viewing • 48
Emergency calls • 93
FDN (Fixed Dialling Number) mode •
87
File manager • 55
File messenger • 46
File sender • 46
File viewer • 60
Folder tone • 79
G
Games • 59
Greeting message • 81
Health and safety • 90
Holding, call • 28
Java applications • 59
Key tones
selecting • 79
sending/muting • 29
volume • 80
Language, select • 80
Last number, redial • 27
LCD brightness • 81
Locking
call log • 87
contacts • 87
media contents • 87
messages • 87
phone • 86
USIM/SIM card • 87
Low battery indicator • 8
Media player • 86
Memory card
accessing files • 61
installing • 22
Memory status
contacts • 36
downloaded items • 61
messages • 55
phone • 88
scheduled things • 65
Messages
broadcast • 50
configuration • 47
e-mail • 48
greeting • 81
MMS with files • 44
MMS • 43, 46
push • 47
SMS • 42, 46
Minute minder • 79
Missed alarm events • 62
Missed calls • 31
MMS messages
creating/sending • 43, 44
deleting • 47
settings • 51
viewing • 46
mPet • 72
Multiparty-call • 29
Music, downloaded • 57
Name card • 36
Names
entering • 25
searching • 33
Network selection • 84
Numbers
searching • 33
storing • 34
Organiser • 62
Outbox, messages • 48
Password
barring • 83
phone • 87
Phone
care and maintenance • 94
display • 10
icons • 10
locking • 86
password • 87
resetting • 88
switching on/off • 8
unpacking • 6
Photos
editing • 55
taking • 65
viewing • 55
PIN, change • 87
PIN2, change • 87
Privacy • 87
Problems, solve • 89
Profiles • 79
Push messages • 47, 54
Index
Icons, description • 10
Images, downloaded • 55
Inbox, messages
e-mail • 48
SMS/MMS • 46
International calls • 27
Internet • 39
Received calls • 32
Received messages
e-mail • 48
MMS/SMS • 46
109
Index
Recording
videos • 68
voice memos • 75
Redialling
automatically • 83
manually • 27
Resetting phone • 88
Ringer
incoming calls • 79
messages • 79
Road safety • 92
Roaming • 84
Video calls
answering • 30
making • 30
options • 30
setting • 83
Videos
playing • 57
recording • 68
Voice recorder
playing • 75
recording • 75
Voicemail server • 54
Safety
information • 90
precaution • 1
Security calls • 87
Sent messages • 48
Shortcuts • 80
Silent mode • 13
SIM card
inserting • 7
locking • 87
SMS messages
creating/sending • 42
deleting • 46, 50
settings • 51
viewing • 46
Sound profiles • 79
Speakerphone • 29
Speed-dial • 35
Switching applications 24
Switching on/off
microphone • 29
phone • 8
110
T9 mode, text input • 25
Templates, message • 49
Text, enter • 25
Time, set • 80
Tube map • 77
USIM card
inserting • 7
locking • 87
Waiting call • 83
Wallpaper • 81
Web browser
access • 39
bookmarks • 41
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
XMP Toolkit                     : 3.1-701
Modify Date                     : 2006:09:07 13:09:28-04:00
Create Date                     : 2006:09:07 11:03:48-04:00
Metadata Date                   : 2006:09:07 13:09:28-04:00
Creator Tool                    : Adobe Acrobat 6.0
Format                          : application/pdf
Document ID                     : uuid:cd7748cc-4100-41aa-b7cc-845e26968938
Instance ID                     : uuid:7ecb6209-e91b-4136-a55e-4521c7f64517
Producer                        : Adobe Acrobat 6.0
Has XFA                         : No
Page Count                      : 113
Creator                         : Adobe Acrobat 6.0
EXIF Metadata provided by EXIF.tools
FCC ID Filing: A3L705SC

Navigation menu