Samsung Electronics Co BT Bluetooth Module User Manual 1 SEC BT

Samsung Electronics Co Ltd Bluetooth Module 1 SEC BT

Users Manual

SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook www.sec.co.kr Revision v1.0 JAN 2007 SEC-BT Databook Confidential / Preliminary Documentation Revision 1.0
SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook www.sec.co.kr Revision v1.0 JAN 2007 List of Contents 1 General 1.1 Overview 1.2 Features 1.3 Application 1.4 Pinout Diagram & Outline Size 1.5 Device Terminal Descriptions 1.6 Package Dimensions 2 Characteristics 2.1 Electrical Characteristics 2.2 Radio Characteristics 3 Terminal Description 3.1 USB 4 Revision History
SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook www.sec.co.kr Revision v1.0 JAN 2007 1. General 1.1 overview This specification covers Bluetooth module (class-2) which complies with Bluetooth specification version 2.0 + EDR and integrates RF & Baseband controller in small package. This Module has deployed CSR’s BC04-ROM CSP EDR chipset. All detailed specification including pinouts and electrical specification may be changed without notice. BC4 CSP EEPROM 16Kbit Balance Filter X-Tal 26MHz USB VCC 3.3V
SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook www.sec.co.kr Revision v1.0 JAN 2007 1.2 Features • Fully Qualified Bluetooth v2.0 + EDR System • Enhanced Data Rate (EDR) compliant with v2.0.e.2 of specification for both 2Mbps and 3Mbps modulation modes • Full-speed Bluetooth Operation with Full Piconet Support • Scatternet Support • Ultra Low Power Consumption • Excellent Compatibility with Cellular Telephones • Support for 802.11 Co-existence • RoHS Compliant • Integrated transcoders for A-law, u-law and linear PCM • Full-speed USB v2.0 interface supports OHCI and UHCI host interface • Standard HCI (USB) support • Integrated 4Mbit ROM & 48Kbyte RAM • Integrated 26MHz Reference Clock (Option) • Integrated 16Kbit EEPROM (Option) • Competitive Size (14mm x 43mm) 1.3 Application • Audio Dongle • USB Dongle
SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook www.sec.co.kr Revision v1.0 JAN 2007 1.4 Pinout Diagram & Outline Size
SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook www.sec.co.kr Revision v1.0 JAN 2007 1.5 Device Terminal Functions PIN Name PIN No. Description VCC USB + USB - GND 1 2 3 4 Main supply input voltage. Regulated DC Source recommended USB + with selectable internal 1.5k pull-up resistor USB - Ground 1.6 Module Dimension
SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook www.sec.co.kr Revision v1.0 JAN 2007 2. Characteristics 2.1 Electrical Characteristics Absolute Maximum Ratings Rating Minimum Typical Maximum Unit Operating Temperature Range -20 60 ℃ Supply Voltage : VCC -0.3 3.3 +0.3 V Supply Voltage : VDD_CORE 1.7 1.9 V
SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook www.sec.co.kr Revision v1.0 JAN 2007 2.2 RF Characteristics Transmitter Specification Condition Minimum Typical Maximum Unit Output Transmit Power Normal -6 0 4 dBm Transmit Power Density Normal 4 dBm Transmit Power Control Normal 2 8 dBm Frequency Range Normal 2400 2483.5 MHz 20dB Bandwidth Normal 850 1000 KHz Adjacent Channel Power ±2MHz ±3MHz ±4MHz -20 -40 -40 dBm Modulation Characteristics Δf1avg Δf2max Δf2avg/Δf1avg 140 115 175 80 KHz Initial Carrier Frequency Tolerance Normal -20 -20 KHz Carrier Frequency Drift DH1 DH3 DH5 -25 -40 -40 25 40 40 KHz Receiver Specification Condition Minimum Typical Maximum Unit Sensitivity - Single-Slot Packet BER 0.1% -70 - dBm Sensitivity - Multi-Slot Packet BER 0.1% -70 - dBm C/I Performance C/I co-channel C/I F=F0 +-1MHz C/I F=F0 +-2MHz C/I F=F0 +-3MHz 11 0 / 0 -30 / -20 -40 / -40 dB Blocking Performance 30MHz ~ 2GHz 2GHz ~ 2.4GHz 2.5GHz ~ 3GHz 3GHz ~ 12.75GHz -10 -27 -27 -10 dBm Intermodulation Performance n=5 -39 dBm Maximum Input Level Normal -20 dBm
SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook www.sec.co.kr Revision v1.0 JAN 2007 Antenna Description Value Frequency (MHz) 2400~2484 Polarization Linear Operating Temperature (℃) -40~+85 Impedance (Ω) 50 Antenna Type SMD Weight(g) 0.12 VSWR < 3 : 1 Efficiency (%) 80.13 Peak Gain Max.(dBi) 4.21 Average Gain (dBi) -0.93
SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook www.sec.co.kr Revision v1.0 JAN 2007 3. Terminal Description 3.1 USB This Bluetooth module contains a full speed (12Mbit/s) USB interface that is capable of driving a USB cable directly. No external USB transceiver is required. The device operates as a USB peripheral, responding to requests from a master host controller such as a PC. Both the OHCI and the UHCI standards art supported. The set of USB endpoints implemented can behave as specified in the USB section of the Bluetooth specification v2.0 + EDR or alternatively can appear as a set of endpoints appropriate to USB audio devices such as a set of USB speakers. USB is a master/slave oriented system (in common with other USB peripherals). This Module only supports USB slave operation.
SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook www.sec.co.kr Revision v1.0 JAN 2007 4. Revision History Revision Date Change Descriptions Issued by Rev 1.0 2007-01-16 Initial release
SEC-BT Bluetooth v2.0 + EDR Class2 Module Databook www.sec.co.kr Revision v1.0 JAN 2007 FCC Statements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. To comply with the FCC RF exposure compliance requirements, this device and its antenna must not be co-located or operated in conjunction with any other antenna or transmitter. The final device into which this transmitter module is installed must be labeled with the following statement: “This device contains TX FCC ID: A3LBT.” If this transmitter will be configured as a pc peripheral, it will be the OEM’s responsibility to obtain authorization as such (either through Certification of Declaration of Conformity) prior to marketing of the device.

Navigation menu