Samsung Electronics Co BT08PS Wireless Photo Player User Manual 1of 2

Samsung Electronics Co Ltd Wireless Photo Player 1of 2

User manual 1of 2

          BT08PS
|  Safety Symbols |  Power  |  Installation |  Using and Cleaning | Safety SymbolsMake sure to follow the directions below to prevent accidents and damage to the product.  Failure to follow the accompanying directions may lead to serious injury or death.   Failure to follow the accompanying directions may lead to minor personal injury or property damage.|  Safety Symbols |  Power  |  Installation |  Using and Cleaning | Power   The images here are for reference only, and are not applicable in all cases (or countries).  Insert the power plug correctly until it is firmly in place. zFailing to do so, may cause fire.       Do not use a damaged power plug, cord or outlet, as this may cause electric shock or fire.    Do not touch the power plug with wet hands, as this may cause electric shock.
    Do not connect more than one appliance to a single outlet, as an overheated outlet may cause fire.      Do not use force to pull the power cord.  zDon't place anything heavy on the power cord, as this may cause electric shock or fire.       Make sure to turn the power off and disconnect the power plug from the outlet before moving the product. Make sure to disconnect the connection cables from other devices as well. zMoving the product without disconnecting the power cord may damage it while moving, and may cause electric shock or fire.       Hold and pull out the plug by its body when disconnecting it from the outlet, as pulling the plug out by the cord may cause it to be damaged. zFailing to do so, may cause fire, or the product may not turn on normally.       Ensure that the power plug is disconnected before cleaning the product. zFailing to do so, may cause electric shock or fire.     Do not let water come into contact with or enter the power adapter,as this may cause electric shock or fire. zDo not use the product outdoors in snowy or rainy weather, or near any water.  zWhen cleaning the floor with water, avoid any water contact with the power adapter.       Do not place the power adapter near a heater, as this may cause fire.
 |  Safety Symbols |  Power  |  Installation |  Using and Cleaning | Installation     When installing the product on a cabinet or shelf, do not let the front end of the product project beyond its front edge. zFailing to do so, may cause the product to fall, resulting in a product malfunction or personal injury.       Do not place the power cord near a heater, as the power cord may melt, causing electric shock or fire.    Do not install the product in a car or a location exposed to oil, smoke, moisture, water, or rainwater. zAny contact of these materials with the product may cause electric shock or fire.     Disconnect the power plug when there is thunder or lightning. zFailing to do so, may cause electric shock or fire.       Place the product down gently when installing it. zFailing to do so may cause product damage or personal injury.       Avoid dropping the product when moving, as this may cause product damage or personal injury.    Do not install the product in a location easily reached by children. zAs the product may fall and cause personal injury.
|  Safety Symbols |  Power  |  Installation |  Using and Cleaning | Using and Cleaning     Do not insert any metal objects such as forks, wire, or gimlets, or flammable items such as paper or matches into the ports at the back of the product, as this may cause electric shock or fire. zIf water or any foreign substance enters the product, make sure to turn the product off disconnect the power plug from the outlet, and contact a service center.       Never disassemble, repair, or modify the product yourself. zIf you need to repair your product, contact a service center. An attempt at repairing this product may cause electric shock or fire.       If you hear a strange sound, smell anything burning, or see smoke, disconnect the power plug immediately and contact a service center. zFailing to disconnect the power plug may cause electric shock or fire.       Always remove dust and water from the pins and connections of the power plug. zFailing to do so may cause electric shock or fire.     When cleaning the product, first disconnect the power plug and clean it with a soft, dry cloth. zDo not use any chemicals such as benzene, alcohol, thinners, mosquito repellant, aromatic, lubricant, detergent or wax.     When not using the product for a long time, make sure to disconnect the power plug. zHeavy accumulated dust may cause electric shock or fire.     If the product needs to be installed in a location that doesn't satisfy general conditions, make sure to contact one of our service engineers about the installation as the product may encounter serious quality problems due to its environment. zThis refers to locations exposed to conditions such as heavy fine dust, chemicals, high or low temperature, moisture, or when the product needs to be used continually without a break over a long time.   If the product has been dropped or the product casing is damaged, turn it off and
   disconnect the power plug. zUsing the product without verifying that it has not been damaged may cause electric shock or fire. Please contact a service center.  Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection systems)  This marking shown on the product or its literature, indicates that it should not be disposed with other household waste at the end of its working life. To prevent possible harm to the environment or damage to health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources.  Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.   Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
|  Features |  Components |  Front |  Back |  Side | FeaturesExpand the memory capacity with a memory card. Enjoy stored images immediately. By connecting a CF or SD/MMC/MS/XD memory card of your digital camera to your digital photo frame, you can enjoy the images on your digital photo frame quickly and easily. This also provides a way to expand the memory capacity of your digital photo frame. Stylish design With its sleek and clean, high class design, your digital photo frame doubles as an ornament for your desk or table. A rotating stand allows both horizontal and vertical installations. |  Features |  Components |  Front |  Back |  Side | Please check that all components are contained in the delivered package.  If anything is omitted, contact the local distributor where the product was purchased. For optional items, contact a service center.  Never use a power adapter other than the adapter provided with the product. Components   Digital Photo Frame  (Colors may differ for each product.)Manual
Quick Start Warranty (Not available in all locations) User ManualCablesPower cord  USB cable (A-mini B type) Power AdapterSold separatelyCF/SD/MMC/MS/XD card|  Features |  Components |  Front |  Back |  Side | Front |  Features |  Components |  Front |  Back |  Side | Back
   Kensington lockThe Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately.)  For using a locking device, contact where you purchase it.  Power terminalConnect the power adapter to this jack.  Connect the power cord to the power terminal of the power adapter.  USB connection terminal Connect a PC or an external device using a USB cable.  Up stream terminalConnect your digital photo frame to a PC's USB terminal with a USB cable. (Compatible to USB 1.1(host))Make sure to use the USB cable (A-mini B type) provided with the product when connecting your digital photo frame to a PC through the up stream terminal.StandA stand allows both horizontal and vertical installations.  If your digital photo frame is installed vertically, you can rotate your photos using the rotation function to fit to the vertical installation.Sliding Prevention HolderSupports the product so that it stays firmly in place on slippery surfaces.     Headphone connection jackConnect your headphones to the Headphone connection jack.     SpeakerYou can listen to music files and movies.|  Features |  Components |  Front |  Back |  Side | Side
[] Power ButtonTurns the product on or off.  Hold down the power button at the right of the product for about 2 seconds. Power Indicator Connect the power cord to the power terminal of the power adapter. Shows the power status. When the product is powered on, the power light turns on.[MENU] Menu Button Displays the menu at the bottom left corner of the screen.[VOL +] Volume ButtonAdjusts the sound volume when playing music files or movies.[] Up Button Moves the selected frame in the menu up.[] Left Button  Moves the selected frame in the menu to the left.[ ] Right Button  Moves the selected frame in the menu to the right.[VOL -] Volume ButtonAdjusts the sound volume when playing music files or movies.[ ] Down Button Moves the selected frame in the menu down.[ENTER( )] Enter Button Selects a file to play back, a setting on the menu, or an item. [▶ll] Play / Pause Button Play / Pause during playback. [BACK] Back Button Return to the previous menu.
You can insert a CF, SD/MMC, MS, XD card into this slot to view and use the contents stored on it.Connect a PC or an external device using a USB cable.  Down stream terminal Connect your digital photo frame to a USB-supporting storage device with a USB cable.
    |  Power |  USB |  Memory Card |   Connecting the Power       Connect the power adapter to the   terminal at the back of the product.Connect the power cord to the power adapter.Plug the power cord for the product into a nearby outlet. Press the   button at the right of the product to turn the product on.  |  Power |  USB |  Memory Card |   Connecting via USB
      Up Stream TerminalUsed to connect your digital photo frame to a PC. When connecting your digital photo frame to a PC through the up stream terminal, make sure to use the USB cable provided with the product.    Down Stream TerminalUsed to connect an external USB-supporting device to your digital photo frame.   Some USB devices may not support Mini-Monitor.This product does not support USB card readers. Only USB storage is supported.The external devices connected to your Digital Photo Frame are not recognized by your PC.When connecting an external device to the down stream terminal, use the USB cable provided with the external device. (For more information on external devices and their cables, contact a relevant service center.)Samsung carries no liability for external device malfunctions caused by using any cable except the standard cables specified for each device.Some external products provide a cable that does not meet USB standards. Hence, they may cause a malfunction.If an external storage device does not work normally when connected to your digital photo frame, try to connect it to your PC. If it still does not work normally when connected to your PC, contact a service center for that external device or your PC.        Connect to the upstream jack of your digital photo frame.  Connect the USB terminal of your PC.   Folder Structure      When connecting this product to your PC, it is displayed as a removable disk (E:), as shown in the figure below.  You can save and play all music and movie files in the following folders.  You can also add and delete folders as required. (However, if you delete the following default folders, they are automatically created when your product is turned on again.)      images A default folder created by the product
     (The full path displayed in the Digital Photo Frame: Photos / frame memory / images)       Favorites  Mainly stores photos.       Recent  Temporarily stores the last displayed photo.       imagecashe Stores as many Web Photos (photos from the Windows Live or RSS) to the cache as were used in the images folder.  If you copy your photos from your PC to the imagecashe, they are invisible and cannot be viewed with your Digital Photo Frame.   The capacity of this product is 64 MB.  If the capacity is exceeded, no further files can be stored.Do not turn off the product while saving, playing, or deleting a file.The volume name of the removable disk (for example, E:, F:, G:) may differ depending on your computer environment.     |  Power |  USB |  Memory Card |   Connecting a Memory Card       CF/SD/MMC/MS/XD CARD Slide the card in the direction marked on the top of the card. Removing the memory card while playing MP3s, movies, or photos, may cause the product to operate abnormally. In this case, turn the product off and on.
    |  Buttons |  Photos, Web Photos |  Music |  Video |  Settings |   Buttons    Control Buttons     Button Description  Turns the product on or off.  Hold down the power button on the side of the product for about 2 seconds.MENU   Opens the on-screen menu and exits from the menu. VOL +, VOL -   Push the button to adjust volume.∧,∨,<,>   These buttons allow you to adjust items in the menu.ENTER  Activates a highlighted menu item.BACK   Use this button to step one step back in the menu.  |  Buttons |  Photos, Web Photos |  Music |  Video |  Settings |   Photos / Web photos    List Menu (Only Photos)       When pressing the MENU button, the on-screen menu is displayed on the screen.      Upper OSD  Sub OSD Description Show Pictures From  Memory Card, CF Card, USB, Frame Memory(:default value)Select a connected storage media.  You can only select an external device which is currently connected.
 Thumbnail List Menu       When pressing the MENU button, the on-screen menu is displayed on the screen.      Upper OSD  Sub OSD Description Start Slide Show  Start Slide Show Copy Copy File, Copy All FilesYou can copy the selected file to other connected storage devices. Delete Yes, NoDelete the file. (This is enabled when Photos is selected.)Show Related Photos Allows you to view a list of other photos which have a relationship to the selected image, for example, other photos with a similar date to it.  -. You can only use images shared by Windows Media Player on your PC while your digital photo frame is connected to it. Set as Background  Sets the currently selected image as the Home Background for the main screen. At this time, the Home Background in the Settings menu is automatically set to Custom.Background Music On, Off, SettingSet the Background Music to On by pressing the Menu button. Then set the Background Music to Setting by pressing the Menu button again and selecting the music you want from among the music files saved on the Frame Memory or the connected external memory.   Slideshow Menu     Upper OSD  Sub OSD Detail OSD Description Pause Slide Show/ Resume Slide Show  Pause Slide Show/Resume Slide Show Slide Show Settings Transition  Fade, Wipe, Slide, Blind, Checker, Random, None Select an effect for your slide show when transitioning between images. Interval  5 Seconds, 10 Seconds, 20 Seconds Controls the time intervals between image files for a slide show.  Repeat  On, OffSelect the Repeat for displaying images.  Shuffle  On, OffSelect whether to playback the files sequentially or in shuffle mode.  Show Related Photos Allows you to view a list of other photos which have a relationship to the selected image, for example, other photos with a similar date to it.  -. You can only use images shared by Windows Media Player on your PC while your digital photo frame is connected to it. Brightness  0~100Adjust the brightness from 0 to 100. Rotate  Original, 90°, 180°, 270°You can rotate an image 90°, 180°, or 270°. You can also keep the image as is by selecting Original.
Rate Photos While a slide show is in progress, stars (★) are displayed according to the grade set by Windows Media Player. -. You can only use images shared by Windows Media Player on your PC while your digital photo frame is connected to it. Photo Aspect  Original, Auto Fit, Fit To Width, Fit To ScreenSelect an aspect ratio for images to display.Set as Background  Sets the image being displayed in the slide show as the Home Background for the main screen.Background Music  On, Off, SettingYou can specify the background music for your slide shows.  Select On and move to Settings. Then select the music you want to play. You can adjust the volume using the ∧∨ buttons to the right of your digital photo frame.    Direct Functions (Slide Show)         Button Description >  Play the next file in the list. <  Play the previous file in the list. ▶ ll Pressing the ▶ ll button alternately plays and pauses the file.MENU  Opens the on-screen menu and exits from the menu.    |  Buttons |  Photos, Web Photos |  Music |  Video |  Settings |    Music    List Menu        When pressing the MENU button, the on-screen menu is displayed on the screen.      Upper OSD  Sub OSD Description Music Source  Memory Card, CF Card, USB, Frame Memory(:default value)Select a connected media storage device. You can only select an external device which is currently connected. Playback Mode  Once, Repeat, Repeat Once, ShuffleSelect to playback music files either Once, repeatedly or randomly. Copy   Copy File
 You can copy the selected file to other connected storage devices.  Delete  Delete the file.      Play Menu        When pressing the MENU button, the on-screen menu is displayed on the screen.      Upper OSD  Sub OSD Description Playback Mode  Once, Repeat, Repeat Once, ShuffleSelect to playback music files either Once, repeatedly or randomly. Brightness  0~100Adjust the brightness from 0 to 100.     Direct Functions       > Plays the next file.< Plays the previous.∧,∨ Adjusts the volume.▶ll Plays and Pauses a file. MENU  Displays the menu. Exits the menu.  |  Buttons |  Photos, Web Photos |  Music |  Video |  Settings |    Video   List Menu       When pressing the MENU button, the on-screen menu is displayed on the screen.    Upper OSD  Sub OSD Description Video Source  Memory Card, CF Card, USB, Frame Memory(:default value)Select a connected media storage device. You can only select an external device which is currently
  connected. Playback Mode  Once, ContinuousYou can playback movie files either Once or Continuously. Copy  You can copy the selected file to other connected storage devices. Delete  Delete the file.       Play Menu       When pressing the MENU button, the on-screen menu is displayed on the screen.      Upper OSD  Sub OSD Description Playback Mode  Once, ContinuousSelect a mode among Once, Continuous. Brightness  0~100Adjust the brightness from 0 to 100.     Direct Functions     > Play the next file.< Play the previous.∧,∨ Adjust volume.▶ll  Plays and Pauses a file.MENU  Displays the menu. Exits the menu.  |  Buttons |  Photos, Web Photos |  Music |  Video |  Settings |    Settings   Set the Settings       Sub OSD
  Upper OSD  Description Default Computer  By using the wireless LAN connection search function, you can reset the current connection and re-select the computer from which you are receiving photos. Language English, Deutsch, Español, Français, Italiano, Русский, PortuguêsSelect a language to use for your product.  Time Zone  You can select the Time Zone that you are in. Select a Time Zone.  Daylight Saving Time On, OffSelects whether to apply DST (Daylight Saving Time) depending on the Time Zone and Summer Time. Date and Time Month, Day, Year, Hour, Minute, am/pmEnter and set the Month, Day, Year, Hour, Minute, am or pm. Alarm Activation, Hour, Minute, am/pm, Repeat, Sound, VolumeYou can set alarms.  Auto Picture On/Off Activation, Hour, Minute, am/pmThe screen turns off and all operations stop at the Off Time. The screen turns on and all operations return to their previous states at the On Time.  If the screen was turned off at the Off Time, it turns on again when a key other than the Power key is pressed.  When your Photo Frame is connected to your PC as a Mass Storage device using a Mini-Monitor or USB cable, the screen will not be turned off even at the Off Time. OSD Color Theme Violet Style, Blue Style, Green Style, Orange Style You can select a color theme for the OSD background. Home Background Default, CustomYou can reset the Home Background of the main menu to the default image. Time Format 12 hours, 24 hoursYou can select whether to display the time in the 12 or 24 hour mode. In 24 hours, am and pm will not be displayed. Starting Mode Home Menu, Last ModeYou can select the menu which is displayed when your Digital Photo Frame starts. Internet Time Update Auto, Manual, Update Time NowSelect whether to set the time information which is received through the Internet as the system time for your Digital Photo Frame. Timeout 1 Minute, 3 Minutes, 5 MinutesSelect the time for the screensaver to start. However, if no button is operated for one minute, the screensaver starts, regardless of the Timeout settings on the Main menu. Button Sound On, OffYou can turn the sound of the operation buttons on or off. Brightness 0~100Adjust the brightness from 0 to 100. Wireless Network (SSID)  Displays a list of available SSIDs when an access point exists in your vicinity. Wireless Network Code  Displays the password required if the access point has a security setting. Managment Web Address  Displays the webpage address to connect to Samsung Photo Frame Web Configuration. Proxy Required Yes, NoYou can specify whether to use a proxy server.(On/Off) Firmware Update Update the product using external memory(CF/SD/MMC/MS/XD,USB). Please visit www.samsung.com for the latest firmware update. Reset Settings Yes, NoReverts the product settings to factory defaults. Product Information  Model, Firmware Version, Copyright
View the product information.       Management Web       Go to [Settings]-[Management Web Address] in your Photo Frame and then open this URL using Internet Explorer on your PC.   When connected, the Welcome page will be displayed. Enter the Password which you can see in the [Settings]-[Management Password] of your Photo Frame in the [Password] box on the Welcome page, and click the [sign in] button.        Upper Menu  Sub Menu Description Welcome  PasswordEnter the password displayed in Management Password. Enables case-sensitive mode.  Photo Frame   Now Playing You can monitor the photos which are being displayed in the slide show at the same time.  Web Photos  Photo Feeds, Photos Windows Live Spaces You can add or remove a website address from which you can receive photos.  Storage  Photo Feeds, Photos Windows Live Spaces You can check the size of the photos in the addresses listed in Web Photos.  Settings  Basic, Administrator Password, Date and Time, Network Settings You can enter and change the product name, administrator password, time, and network proxy server, etc. Help  Displays the help section for using Samsung Photo Frame Web Configuration.

Navigation menu