Samsung Electronics Co CHC722 17 INCHES MONITOR User Manual
Samsung Electronics Co Ltd 17 INCHES MONITOR
USER MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 10758 |
| Application ID | u3+Wz4mfZ/WG2ioBUTDIHw== |
| Document Description | USER MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 48.7kB (608703 bits) |
| Date Submitted | 1998-10-28 00:00:00 |
| Date Available | 1998-12-16 00:00:00 |
| Creation Date | 1998-09-17 15:10:01 |
| Producing Software | Acrobat PDFWriter 3.0 for Power Macintosh |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | USER MANUAL |
| Document Creator | QuarkXPressâ„¢ |
| Document Author: | mac9500 |
50/70-E 9/17/98 3:10 PM Page i USER’S MANUAL 43cm 17” Color Monitor M780 50/70-E 9/17/98 3:10 PM Page ii Safety Instructions Before connecting the AC power cord to an outlet, make sure the voltage designation on your monitor corresponds to the local electrical supply. Do not expose the monitor to rain or use it near water (in kitchens, near swimming pools, etc.). If the monitor accidentally gets wet, unplug it and contact an authorized dealer immediately. You can clean the monitor with a damp cloth when necessary, but be sure to unplug the monitor first. Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock. To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open the monitor’s case. Place the monitor on a solid surface and treat it carefully. The screen is made of glass and can be damaged if dropped, hit or scratched. Never use your monitor if the power cord has been damaged. Do not allow anything to rest on the power cord, and keep the cord away from areas where people can trip over it. Locate your monitor near an easily 10 accessible AC outlet. If your monitor does not operate 11 any normally – in particular, if there are unusual sounds or smells coming Be sure to hold the plug, not the cord, when disconnecting the monitor from an electric socket. Openings in the monitor cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Also, avoid using the monitor on a bed, sofa, rug, or other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If you put the monitor in a bookcase or some other enclosed space, be sure to provide adequate ventilation. Put your monitor in a location with low humidity and a minimum of dust. from it – unplug it immediately and contact an authorized dealer or service center. temperatures can cause 12 High problems. Don’t use your monitor in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources of heat. the monitor when it is going to 13 ofbeUnplug left unused for an extended period time. Unplug your monitor from the AC 14 outlet before any service. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ii 50/70-E 9/17/98 3:10 PM Page 1 Table of Contents Safety Instructions.................................................................................................................ii Your New Monitor ..................................................................................................................2 Connecting Your Monitor ................................................................................................................2 Front Panel ........................................................................................................................................3 Direct Access Buttons ....................................................................................................................3 Operation .................................................................................................................................4 On-screen Menu System................................................................................................................4 Monitor Function Control................................................................................................................5 Brightness ..........................................................................................................................5 Contrast ..............................................................................................................................5 Horizontal Position ...........................................................................................................5 Vertical Position ................................................................................................................5 Horizontal Size ...................................................................................................................5 Vertical Size........................................................................................................................5 Pincushion ..........................................................................................................................5 Display Timing ....................................................................................................................5 Advanced Features ...........................................................................................................6 Color Temperature......................................................................................................6 Language .....................................................................................................................6 Half tone.......................................................................................................................6 Moire ...................................................................................................................................6 Degauss ..............................................................................................................................6 Recall...................................................................................................................................6 Geometry.............................................................................................................................6 Pinbalance...................................................................................................................6 Parallelogram..............................................................................................................6 Rotation ........................................................................................................................6 V-linearity.....................................................................................................................6 Trapezoid.............................................................................................................................6 Troubleshooting......................................................................................................................7 PowerSaver.............................................................................................................................7 Specifications .........................................................................................................................8 Display Modes ........................................................................................................................8 Index.........................................................................................................................................9 Regulation Information.........................................................................................................iii 50/70-E 9/17/98 3:10 PM Page 2 Your New Monitor Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Monitor & stand Connecting Your Monitor Turn off your computer and unplug the power cord. Video port Connect the signal cable (with an adapter if necessary) to the video port on the back of your computer, video board, video card, or graphics card. Power port Power cords Turn on your computer and monitor. If your monitor displays an image, installation is complete. Signal cable Connect the end of the signal cable to your computer’s video port. If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the pins on your adapter (adapter not included). An IBM-compatible computer does not need an adapter. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor and the power cord for your computer into a nearby outlet. To install the monitor driver on your PC: 1. Insert the provided diskette into the A drive. 2. Double click the “install.exe” file. 50/70-E 9/17/98 3:10 PM Page 3 Your New Monitor Front Panel Menu button Opens and closes the on-screen menu. Also used to move between menus when using the on-screen menu system. The –/+ buttons These buttons allow you to select and adjust items using the on-screen menu. When adjusting an item using the on-screen menu, the ( _ ) button lowers the value of the selected function. The ( + ) button raises the value of the selected function. These buttons are also direct access buttons for the Contrast and Brightness feature controls. (See the section on Direct Access Buttons). The button This button is used with the on-screen menu system to select a highlighted function for adjustment. Also used to move between menus when using the on-screen menu system. Power button Turns the monitor on and off. The power indicator light glows green during normal operation. Direct Access Buttons Most of the adjustments you make to your monitor will be accessed through the on-screen menu described in the next section. The Contrast and Brightness features can also be accessed with the touch of a button on the front of your monitor. With the menu off, press the or button on the front of your monitor. The button accesses the Brightness feature. The button accesses the Contrast feature. Push the button to increase or the Press the menu button button to decrease the value of a selection. twice to exit the on-screen menu. 50/70-E 9/17/98 3:10 PM Page 4 Operation On-screen Menu System Your monitor has an on-screen menu system, accessed by the buttons on the front of your monitor, that allows you to adjust characteristics of the screen image. Display changes are indicated by on-screen adjustment icons. Some functions have sub-menus. Push the menu button to display the main menu. Function icons are arranged across the top of the on-screen menu. Use the and buttons to make adjustments. The increases values, the decreases values. On-screen calibration numbers show the effect of your adjustment. If you are in a sub-menu, use the menu button to return to the previous menu. Push the menu button Push the or button to move through the icons. The name of the active function will appear below the rows of function icons. To select a function or open a sub-menu, push the button. The screen will display the options for adjustment. If there is a sub-menu, use the or button to highlight the feature you want to adjust, then push the button to select it. to exit and save your changes. Function icons Active function Brightness Adjustment icons Function selection and Menu navigation :A c c e s s :Exit Fu nction Menu 50/70-E 9/17/98 3:10 PM Page 5 Operation Icon Monitor Function Control Brightness Background brightness of screen. - decreases brightness + increases brightness Contrast Contrast of screen image. - decreases contrast + increases contrast Horizontal Position Horizontal screen position. - moves the screen left + moves screen right Vertical Position Vertical screen position. - moves screen down + moves screen up Horizontal Size Horizontal screen size. - decreases size + increases size Vertical Size Vertical screen size. - decreases size + increases size Pincushion Straightness of vertical edges. - curves image inward + curves image outward Display Timing Monitor display settings. - factory timing + user timing O n - s c r een Adjustment Brightness :Access Function Contrast :Access Function Horizontal Position : Access Function Veritical Position :Access Function Horizontal Size :Access Function Veritical Size :Access Function Pincushion :Access Function Display Timing :Used Mode 50/70-E 9/17/98 3:10 PM Page 6 Operation Icon Monitor Function Control O n - s c r een Adjustment Advanced Features Color temperature - 9300k more blue + 6500k more red Language - , + scroll through on-screen language options. Half tone - off + on Moire Correct for on-screen moiré pattern. - horizontal moire + vertical moire Degauss Removes color distortion caused by magnetic fields. Do not use more than once in 30 minutes. Recall Returns monitor to original settings. - no + yes Geometry Advanced Features 1. :Access :Exit Function Menu Color Temperature 2. + - :Select Funtion :Previous Menu Moire :Access Function Degauss :Access Function Recall :Access Function Geometry Pinbalance 1. - curves vertical lines to left : Access Function + curves vertical lines to right : Exit Menu Parallelogram - skews screen image left + skews screen image right Pinbalance Rotation 2. - rotates entire screen right + - :Select Funtion + rotates entire screen left :Previous Menu V-linearity - compresses image at top of screen + compresses image at bottom of screen Trapezoid Width of top and bottom of screen. - widens top of screen + widens bottom of screen Trapezoid :Access Function 50/70-E 9/17/98 3:10 PM Page 7 Troubleshooting Before calling for service, check the information in this section to see if you can solve the problem yourself. If you do need assistance, please call the phone number on the warranty card, the phone number on the back cover of this manual, or contact your dealer. There is no screen image. • Check to see that both the monitor and the computer are plugged in and turned on. “Check Signal Cable” appears. • Check the signal cable connection between the computer and the monitor. “Sync out of Range” appears • Check the maximum Resolution and the frequency on the video port of your computer. • Compare these values with the data in the Display Modes Timing chart, page 8 The screen image is too light or too dark. • Adjust the brightness or contrast settings. The screen image is too large or too small. • Adjust the size settings. The colors are distorted with dark or shadowed areas • Activate the degauss feature. •Adjust the color temperature. The power indicator light is blinking green. • The monitor is using its power management system. You need the monitor driver software. • You can download the driver from the internet at http : //www.samsungeletronics.com . PowerSaver This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you move the computer's mouse or press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use a software utility installed on your computer to set up this feature. State Normal Operation Power Green Indicator Power 90W (maximum) Consumption 80W (nominal) Power Saving function mode EPA/NUTEK Standby mode Suspend mode Power-off Mode Position A1 Position A2 Green Blinking Green Blinking Green Blinking (0.5 sec interval) (0.5 sec interval) (1 sec interval) 45W (nominal) Less than 15W Less than 5W NOTE: This monitor is EPA ENERGY STAR® compliant and NUTEK compliant when used with a computer equipped with VESA DPMS functionality. 50/70-E 9/17/98 3:10 PM Page 8 Specifications Specifications Models: M780 Picture Tube •17” (43 cm) Full square type (40 cm viewable) •90° deflection •0.26mm dot pitch •Multi Layer Coated with anti-static •Medium-short persistence phosphor •Horizontal: 30kHz to 85 kHz •Vertical: 50 Hz to 160 Hz •Unlimited •1280 x 1024/ 75Hz •Horizontal:306 ± 4mm •Vertical: 230 ± 4mm •Analog: .7Vpp positive at 75 ohms •Separate Sync: TTL level, positive or negative •135 MHz •AC 100-240 Volt ± 10%, 60 Hz/50 Hz ± 3 Hz •90 watt maximum •Unit: 420 x 426 x 422 mm /17.0 kg •Carton: 563 x 569 x 556 mm /20.0 kg •Operating temperature: 32°F to 104°F (0°C to 40°C) •Humidity: 10% to 80% •Storage temperature: -4°F to 113°F (-20°C to 45°C) •Humidity: 5% to 95% Synchronization Display Color Maximum Resolution Active Display Input Signal, Terminated Maximum Pixel Clock Power Supply Power Consumption Dimensions/Weight (WxDxH) Environmental Considerations Design and specifications are subject to change without notice. Display Modes Display Mode IBM, VGA2, 720 x 400 IBM, VGA3, 640 x 480 VESA, 640 x 480 VESA, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1280 x 1024 Horizontal Frequency (kHz) 31.469 31.469 37.500 43.269 46.875 53.674 60.023 68.677 48.363 79.976 Vertical Frequency (Hz) 70.087 59.940 75.000 85.008 75.000 85.061 75.029 84.997 60.004 75.025 Pixel Clock (MHz) 28.322 25.175 31.500 36.000 49.500 56.250 78.750 94.500 65.000 135.000 Sync Polarity (H/V) –/+ –/– –/– –/– +/+ +/+ +/+ +/+ -/+/+ 50/70-E 9/17/98 3:10 PM Page 9 Index A d a p t e r . . . . . . . . . . . . . . . . . . . . . . . . .2 Advanced feature s . . . . . . . . . . . . . . . .6 P a r a l l e l o g r a m . . . . . . . . . . . . . . . . . . . .6 P i n b a l a n c e . . . . . . . . . . . . . . . . . . . . . . .6 Brightness . . . . . . . . . . . . . . . . . . . . . . 5 Button, . . . . . . . . . . . . . . . . . . . . . .3 Buttons, + / – . . . . . . . . . . . . . . . . . . . . .3 P i n c u s h i o n . . . . . . . . . . . . . . . . . . . . . . .5 Color temperature . . . . . . . Connecting your monitor . . Contrast . . . . . . . . . . . . . . . . Degauss . . . . . . . . . . . . . . . . D i rect access buttons . . . . . Display modes . . . . . . . . . . . Display timing . . . . . . . . . . . Driver installation diskette . . . . . . . . . .6 . . . . . . . . .2 . . . . . . . . .5 Power button . . . . . . . . . . . . . . . . . . . . .3 Power cord s . . . . . . . . . . . . . . . . . . . . . 2 Power indicator . . . . . . . . . . . . . . . . . . .3 Power port . . . . . . . . . . . . . . . . . . . . . . .2 ...... ...... ...... ...... ...... . . .6 . . .3 . . .8 . . .5 . . .2 FCC inform a t i o n . . . . . . . . . . . . . . . . . .iii F ront panel . . . . . . . . . . . . . . . . . . . . . .3 G e o m e t ry . . . . . . . . . . . . . . . . . . . . . . . .6 Half tone . . . . . . . . . . . . . . . . . . . . . . . .6 Horizontal position . . . . . . . . . . . . . . . .5 Horizontal size . . . . . . . . . . . . . . . . . . . .5 IC compliance notice . . . . . . . . . . . . . .iii Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 L a n g u a g e . . . . . . . . . . . . . . . . . . . . . . . .6 M a c i n t o s h . . . . . . . . . . . . . . . . . . . . . . .2 Menu button . . . . . . . . . . . . . . . . . . . . .3 M o i re . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Monitor function contro l . . . . . . . . . .5, 6 MPR II compliance . . . . . . . . . . . . . . . .iii Notice de conformité IC . . . . . . . . . . . . . . . .iii O p e r a t i o n . . . . . . . . . . . . . . . . . . . . . . . .4 O n - s c reen menu system . . . . . . . . . . . .4 P o w e r S a v e r . . . . . . . . . . . . . . . . . . . . . .7 R e c a l l . . . . . . . . . . . . . . . . . . . . . . . . . . .6 R o t a t i o n . . . . . . . . . . . . . . . . . . . . . . . . .6 R e g u l a t o ry inform a t i o n . . . . . . . . . . . .iii Safety instru c t i o n s . . . . . . . . . . . . . . . .i i S p e c i f i c a t i o n s . . . . . . . . . . . . . . . . . . . .8 Table of contents . . . . . . . . . . . . . . . . .1 Tr a p e z o i d . . . . . . . . . . . . . . . . . . . . . . . .6 Troubleshooting . . . . . . . . . . . . . . . . . .7 Ve rtical position . . . . . . . . . . . . . . . . . .5 Ve rtical size . . . . . . . . . . . . . . . . . . . . . .5 Video port . . . . . . . . . . . . . . . . . . . . . . .2 V- l i n e a r i t y . . . . . . . . . . . . . . . . . . . . . . .6 Your new monitor . . . . . . . . . . . . . . . . .2 50/70-E 9/17/98 3:10 PM Page 10 Regulatory Information FCC Information User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes the following warning: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television receptions, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. User Information Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. If necessary, consult your dealer or an experienced radio/television technician for additional suggestions. You may find the booklet called How to Identify and Resolve Radio/TV Interference Problems helpful. This booklet was prepared by the Federal Communications Commission. It is available from the U.S. Government Printing Office, Washington, DC 20402, Stock Number 004-000-00345-4. Warning User must use shielded signal interface cables to maintain FCC compliance for the product. Declaration of conformity for products Marked with FCC Logo This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 85 West Tasman Drive San Jose, CA 95134 USA Tel) 408-544-5124 Fax) 408-544-5191 Provided with this monitor is a detachable power supply cord with IEC320 style terminations. It may be suitable for connection to any UL Listed personal computer with similar configuration. Before making the connection, make sure the voltage rating of the computer convenience outlet is the same as the monitor and that the ampere rating of the computer convenience outlet is equal to or exceeds the monitor voltage rating. For 120 Volt applications, use only UL Listed detachable power cord with NEMA configuration 5-15P type (parallel blades) plug cap. For 240 Volt applications use only UL Listed Detachable power supply cord with NEMA configuration 6015P type (tandem blades) plug cap. IC Compliance Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations of ICES-003. Cet appareil numérique de classe B respecte toutes les exigences du Règlement ICES-003 sur les équipements produisant des interférences au Canada. MPR II Compliance This monitor complies with SWEDAC (MPR II) recommendations for reduced electric and magnetic fields. European Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC), (92/31/EEC), (93/68/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms: • EN55022 (CISPR 22) – Radio Frequency Interference • EN50082-1 : 1992 – Electromagnetic Immunity • EN60555-2 (IEC555-2) – Power Line Harmonics • EN60555-3 (IEC555-3) – Voltage Fluctuations • EN60950 (IEC950) – Product Safety. The party responsible for product compliance: SAMSUNG ELECTRONICS CO., LTD QA Lab of Samsung America iii 50/70-E 9/17/98 3:10 PM Page 11 U.S.A. : Samsung Electronics America (SEA) One Samsung Place Ledgewood, NJ 07852 Tel. : 1-800-SAMSUNG (1-800-726-7864) Fax-on-Demand for product information : 1-800-229-2239 CANADA : Samsung Electronics Canada Inc. 7037 Financial Drive Mississauga, Ontario L5N 6R3 Tel. : 1-800-SAMSUNG (1-800-726-7864) Fax. : (905) 542-1199 GERMANY : Samsung Electronics GmbH Samsung-Haus Am Kronberger Hang 6/65824 Schwalbach/Ts. Tel. : 06196-66-1134 Fax. : 06196-66-1133 AUSTRALIA : Samsung Electronics Australia Pty Ltd. Unit G, 10-16 South Street, Rydalmere, N.S.W. 2116 P.O. BOX 368 Tel. : (02) 638 5200 ITALIA : Samsung Electronics Italia SpA Via C. Donat Cattin, 5-20063 Cernusco sul Naviglio (Mi) Tel. : 167-010740 PANAMA : Servicios Samsung (Zona Libre), S.A. 50 and 61 Streets Sta, Cecilia Bdl. Don Camilo, Panama City Tel. : (507) 264-0195 or 269-5571 Fax : (507) 269-5568 ESPAÑA : Samsung Electrónics Comercial Ibérica, S.A. Ciencies, 55-65 (Polígono Pedrosa) 08908 Hospitalet de Llobregat (Barcelona) Tel. : (93) 261 67 00 Fax. : (93) 261 67 50 UK : Samsung Electronics (UK) Ltd. Samsung House, 225 Hook Rise South Surbiton, Surrey KT6 7LD Tel. : (0181) 391 0168 Fax. : (0181) 397 9949Stafford Park 12 Telford, Shropshire, TF3 3BJ Tel. : (01952) 292 262 Fax. : (01952) 292 033 THAILAND : Samsung Service Center 729-729/1 JSP Tower Rachadapisek RD., Bangpongpang, Yannawa, Bangkok 10120 Tel : (662) 2954508-14 Fax : (662) 2954267 SOUTH AFRICA : Samsung Electronics South Africa Somerset Office Park 5 Libertas Road Bryanston, South Africa Tel : (27)-11-463-5678 Fax : (27)-11-463-5215 BRASIL : Samsung Eletrônica da Amazonia Ltda. R. Prof. Manoelito de Ornellas, 303-2 º Andar Chácara Sto. Antônio • cep : 04719-040 São Paulo • SP Tel. : (011) 541-8500 Fax : (011) 523-3995, 522-0726 MEXICO : Samsung Electronics Mexico, S.A. DE C. V. Mina No. 200, Esq. Gavilan Col. Guadalupe Del Moral Iztapalapa, Mexico, D.F. C.P. 09300 Tel . : (525) 686-0800 Fax : (525) 686-5094 CODE NO. : BH68-6????A ( Rev. 0.1 ) Printed on recyclable paper
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.1 Linearized : No Page Count : 13 Creator : QuarkXPress™ Create Date : 1998:09:17 15:10:01 Title : Author : mac9500 Producer : Acrobat PDFWriter 3.0 for Power Macintosh Subject :EXIF Metadata provided by EXIF.tools