Samsung Electronics Co DVDVR330 DVD Recorder / Video Cassette Recorder User Manual 1
Samsung Electronics Co Ltd DVD Recorder / Video Cassette Recorder Users Manual 1
Contents
- 1. Users Manual 1
- 2. Users Manual 2
Users Manual 1
00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 1 Instruction Manual DVD-VR330 www.samsung.com English AK68-00995A-00 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 2 Getting Started Warning TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. Do not install this equipment in a confined space such as a bookcase or similar unit. WARNING : To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture. CAUTION : This DVD Recorder & VCR USES AN INVISIBLE LASER BEAM WHICH CAN CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE RECORDER CORRECTLY AS INSTRUCTED. CAUTION THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. CAUTIONS Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Attention: Pour éviter les chocs électriques, introduíre la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond. This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections. FCC NOTE (for U.S.A): This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 2 - English Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: FCC regulations state that any unauthorized changes or modifications to this equipment may void the user’s authority to operate it. This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elseNote where. This DVD Recorder & VCR is designed and manufactured to respond to the Region Management Information. If the Region number of a DVD disc does not correspond to the Region number of this , the DVD Recorder & VCR cannot play the disc. This device is protected by U.S. Patent Nos.4,631,603;4,577,216;4,819,098;4,907,093; and 6,516,132. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision,and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. This product is covered by one or more of the following U.S. patents: 5,034,830 5,060,200 5,457,669 5,561,649 5,691,858 5,705,762 5,987,417 6,043,912 6,222,983 6,272,096 6,377,524 6,377,531 6,385,587 6,389,569 6,389,570 6,408,408 6,466,532 6,473,736 6,477,501 6,480,829 6,556,520 6,556,521 6,556,522 6,594,208 6,674,697 6,674,957 6,721,493 6,728,474 6,741,535 09/610381 09/610695 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 3 Precaution • Exterior interference such as lightning and static electricity can affect normal operation of this recorder. If this occurs, turn the DVD Recorder & VCR off and on again with the POWER button, or disconnect and then reconnect the AC power cord to the AC power outlet. The recorder will operate normally. use. Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. if the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Handling Cautions • Before connecting other components to this recorder, be sure to turn them all off. • Do not move the recorder while a disc is being played, or the disc may be scratched or broken, and the recorder’s internal parts may be damaged. • Do not put a flower vase filled with water or any small metal objects on the recorder. • Be careful not to put your hand into the disc tray. • Do not place anything other than the disc in the disc tray. • Disconnect the AC power cord from the AC outlet when you don’t intend to use the recorder for long periods of time. • Clean the disc by wiping in a straight line from the inside to the outside of the disc. Maintenance of Cabinet For safety reasons, be sure to disconnect the AC power cord from the AC outlet. • Do not use benzene, thinner, or other solvents for cleaning. • Wipe the cabinet with a soft cloth. Disc Handling • Use discs with regular shapes. If an irregular disc (a disc with a special shape) is used, this DVD Recorder & VCR may be damaged. Holding discs • Avoid touching the surface of a disc where recording is performed. DVD-RAM, DVD-RW and DVD-R • Clean with an optional DVD-RAM/PD disc cleaner. Do not use cleaners or cloths for CDs to clean DVD-RAM/DVD-RW/DVD-R discs. DVD-Video, CD • Wipe off dirt or contamination on the disc with a soft cloth. Cautions on handling discs • Do not write on the printed side with a ball-point pen or pencil. • Do not use record cleaning sprays or antistatic. Also, do not use volatile chemicals, such as benzene or thinner. English - 3 Getting Started • Be sure to remove the disc and turn off the recorder after 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 4 Getting Started • Do not apply labels or stickers to discs. (Do not use discs fixed with exposed tape adhesive or leftover peeled-off stickers.) • Do not use scratch-proof protectors or covers. • Do not use discs printed with label printers available on the market. • Do not load warped or cracked discs. Disc Storage Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment. • Do not keep under direct sunlight. • Keep in a cool ventilated area. • Store vertically. • Keep in a clean protection jacket. • If you move your DVD Recorder & VCR suddenly from a cold place to a warm place, condensation may generate on the operating parts and lens and cause abnormal disc playback. In this case, do not connect the plug to the power outlet and wait for two hours. Then insert the disc and try to play back again. It will work properly when condensation has evaporated. Disc Specifications DVD-Video • A digital versatile disc (DVD) can contain up to 135minutes of images, 8 audio languages and 32 subtitle languages. It is equipped with MPEG-2 picture compression and Dolby 3D surround, allowing you to enjoy vivid and clear theater quality images in the comfort of your own home. • When switching from the first layer to the second layer of a double-layered DVD Video disc, there may be momentary distortion in the image and sound. This is not a malfunction of the unit. • Once a DVD-RW/-R recorded in Video Mode is finalized, it becomes DVD-Video. Audio CD • An audio disc on which 44.1kHz PCM Audio is recorded. • Plays CD-DA format audio CD-R and CD-RW discs. This unit may not be able to play some CD-R or CDRW discs due to the condition of the recording. CD-R/-RW JPEG CD-R/-RW • Only JPEG files with the ".jpg", ".JPG" extension can be used. • The unit can handle a maximum of 1000 files and folders. • Maximum size of progressive JPEG is 3M pixels. • MOTION JPEG is not supported. Using CD-R/-RW • Use a 700MB(80 minutes) CD-R/-RW disc. If possible, do not use a 800MB(90 minutes) or above disc, as the disc may not play back. • If the CD-R/-RW disc was not recorded as a closed session, you may experience a delay in the early play-back time, and all recorded files may not play. • Some CD-R/-RW discs may not be playable with this unit, depending on the device which was used to burn them. For contents recorded on CD-R/-RW media from CDs for your personal use, playability may vary depending on contents and discs. DVD-R Disc Playback and Recording • Once a DVD-R recorded in Video Mode is finalized, it becomes DVD-Video. • You can record onto the available space on the disc and perform editing functions such as giving titles to discs and programs and erasing programs before finalizing. • When programming is erased from a DVD-R, that space does not become available. Once an area on a DVD-R is recorded on, that area is no longer available for recording, whether the recording is erased or not. • It takes about 30 seconds for the unit to complete recording management information after recording finishes. • This product optimizes the DVD-R for each recording. Optimizing is carried out when you start recording after inserting the disc or turning on the unit. Recording onto the disc may become impossible if optimizing is carried out too many times. • Playback may be impossible in some cases due to the condition of recording. • This unit can play back DVD-R discs recorded and finalized with a Samsung DVD video recorder. It may not be able to play some DVD-R discs depending on the disc and the condition of the recording. DVD-RW Disc Playback and Recording • Recording and playback can be performed on DVD-RW discs in both Video and VR Modes. MP3 CD-R/-RW • Once a DVD-RW recorded in VR Mode is finalized, you can- • Only CD-R discs with MP3 files recorded with • Once a DVD-RW recorded in Video Mode is finalized, it ISO9660 or JOLIET format can be played back • Only MP3 files with the "mp3" or "MP3" extension can be used. • For MP3 files recorded with a VBR(Variable Bit Rates), from 32 Kbps to 320 Kbps, the sound may cut in out. • Playable bitrate range is from 56Kbps to 320Kbps. • The unit can handle a maximum of 1000 files and folders. 4 - English not perform additional recording. becomes DVD-Video. • In both modes, playback can be performed before and after finalization, but additional recording, deleting and editing can not be performed after finalization. • If you want to record the disc in VR Mode and then record in V Mode, be sure to execute Format. Be careful when executing Format because all the recorded data may be lost. • A DVD-RW blank disc is initialized to VR Mode when first initialized. 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 5 • DVD-RW (VR mode) • DVD-RW (Video mode) - This is a format that is used for recording data on a DVD-RW or DVD-R disc. The disc can be played by an existing DVD player once it has been finalized. - If a disc that has been recorded in Video mode by a different manufacturer's recorder but has not been finalized it cannot be played or additionally be recorded by this recorder. DVD-RAM Disc Playback and Recording • For cartridge type DVD-RAM discs, remove the • • • • cartridge and use the disc only. Ensure that the recording mode is set to VR mode. Otherwise, this product will not be able to play the recording. You cannot play a DVD-RAM in most DVD players due to compatibility issues. Only DVD-RAM standard Version 2.0 discs can be played in this unit. DVD-RAM recorded on this unit may not work with other DVD Players. To determine compatibility with these DVDRAM discs, refer to the user’s manual for the player. COPY PROTECTION • Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD Recorder & VCR directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs. • This product incorporates copyright protection technology that is protected by methods claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Protection • Program-protected: See page 72 “Locking a Title” • Disc-protected: See page 82 “Disc Protection” ❋ DVD-RAM/DVD-RW/DVD-R discs that are incompatible with the DVD-VIDEO format cannot be played with this product. ❋ For more information on DVD recording compatibility, consult your DVD-RAM/DVD-RW/DVD-R manufacturer. ❋ Use of poor quality DVD-RAM/DVD-RW/DVD-R discs may cause following unexpected problems including, without limitation, recording failure, loss of recorded or edited materials or damage to the recorder. Do not use the following discs! • LD, CD-G, CD-I, CD-ROM and DVD-ROM discs should not be used in this product. [Note] Disc types that can be played : CD/CD-R/CD-RW/MP3 /JPEG/DVD-Video/DVD-RAM/DVD-RW/ DVD-R. DVD+R/+RW cannot record, but the finalized DVD +R/ +RW can be played. For a DVD-R/DVD-RW disc, which has been recorded in Video Mode on another component, it can play only when finalized. • Some commercial discs and DVD discs purchased outside your region may not be playable with this product. When these discs are played, either “No Disc” or “Please check the regional code.” will be displayed. • If your DVD-RW disc is an illegal copy or is not in DVD video format, it may also not be playable. Disc compatibility • High Speed Recording discs can be used in this Recorder. • Not all brands of discs will be compatible with this unit. • The latest firmware upgrade to improve recording & playback quality can be downloaded from our web site. (Download Center at www.samsung.com) • If disc compatibility problem continue, or there is an issue upgrading your recorder, contact the Call Center at 1-800-SAMSUNG. English - 5 Getting Started - This is a format that is used for recording data on DVDRW disc. You can record multiple titles, edit, delete, partial delete, create a playlist, etc. - A disc that is recorded in this mode may not be played by existing DVD players. 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 6 Contents Step 3 : Connecting the Audio Cable . . . . . . . . . . .21 Connecting to your TV . . . . . . . . . . . . . . . . . . . . . . . .21 Connecting to a stereo amplifier with Getting Started analog input jacks . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Connecting to an AV amplifier with a digital input jack Getting Started Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . .3 Handling Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Maintenance of Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . .3 Disc Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Disc Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Disc Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 General Features . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Before Reading the User’s Manual . . . . . . . . . . . . .8 How to use the DVD Recorder & VCR . . . . . . . . . . .9 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Tour of the Remote Control . . . . . . . . . . . . . . . . . . . . . .13 Connecting & Setting Up Quick Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Step 1 : Connecting the Antenna Cable . . . . . . . . . .15 Antenna + DVD Recorder & VCR + TV : No Cable box . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Antenna +Cable box + DVD Recorder & VCR + TV : Cable box with many scrambled channels . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Antenna + DVD Recorder & VCR + . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Step 4 : Connecting External Devices . . . . . . . . . .24 Connecting a VCR, Set-Top Box(STB) or DVD player to the AV IN 1 jacks . . . . . . . . . . . . . . .24 Connecting a Camcorder to the AV IN 2 jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Connecting a Camcorder to the DV IN jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Step 5 : Connecting the Power Cord . . . . . . . . . . .27 Step 6 : Preparing the Remote Control . . . . . . . . .27 Setting the Remote Control . . . . . . . . . . . . . . . . . . . . .28 System Setup On-Screen Menu Navigation . . . . . . . . . . . . . . . . .29 Auto Clock Set . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Manual Clock Set . . . . . . . . . . . . . . . . . . . . . . . . .31 Channel Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Auto Channel Memory . . . . . . . . . . . . . . . . . . . . . .32 Channel Add/Delete . . . . . . . . . . . . . . . . . . . . . . .33 RF Output Channel . . . . . . . . . . . . . . . . . . . . . . . .33 Setting Up the Language Options . . . . . . . . . . . . .34 Setting Up the Audio Options . . . . . . . . . . . . . . . .35 Setting Up the Display (Video) Options . . . . . . . . .36 Setting Up the Parental Control . . . . . . . . . . . . . . .37 VCR Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 Video Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 DVD EP Mode Time . . . . . . . . . . . . . . . . . . . . . . .40 Automatic Chapter Creator . . . . . . . . . . . . . . . . . .40 Quick Recording . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Playback Cable box +TV : Cable box with a few scrambled channels . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Step 2 : Connecting the Video Cable . . . . . . . . . . . .18 Connecting to a Video input jack . . . . . . . . . . . . . . . . . .18 Connecting to an S-video input jack . . . . . . . . . . . . . . . .19 Connecting to Component video input jacks(Y,PB,PR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 6 - English DVD Playback Before Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Using the Disc Menu and Title Menu . . . . . . . . . . .44 Using the Search & Skip Functions . . . . . . . . . . . .44 Slow Motion Play / Step Motion Play . . . . . . . . . . .45 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 7 VCR Playback Playing the VCR . . . . . . . . . . . . . . . . . . . . . . . . . . .55 Tracking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 Special VCR Playback Features . . . . . . . . . . . . . .56 S-VHS Playback . . . . . . . . . . . . . . . . . . . . . . . . . .56 Variable Search System . . . . . . . . . . . . . . . . . . . . .56 Recording DVD Recording Before Recording . . . . . . . . . . . . . . . . . . . . . . . . .58 Recordable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 Recording Formats . . . . . . . . . . . . . . . . . . . . . . . . . . .59 Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 Unrecordable video . . . . . . . . . . . . . . . . . . . . . . . . . . .59 Recording the Current Channel you are watching . .60 Recording from External Devices . . . . . . . . . . . . . .61 Recording through a DV Input jack . . . . . . . . . . . .61 Making a One Touch Recording(OTR) . . . . . . . . . .62 Making a Timer Recording . . . . . . . . . . . . . . . . . . .62 Editing the Scheduled Record List . . . . . . . . . . . . .64 Deleting the Scheduled Record List . . . . . . . . . . . .64 Editing Playing the Title List . . . . . . . . . . . . . . . . . . . . . . . .69 Basic Editing (Title List) . . . . . . . . . . . . . . . . . . . . .71 Renaming(Labeling) a Title . . . . . . . . . . . . . . . . . . . . .71 Locking(Protecting) a Title . . . . . . . . . . . . . . . . . . . . . .72 Deleting a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72 Deleting a Section of a Title . . . . . . . . . . . . . . . . . . . .73 Advanced Editing (Playlist) . . . . . . . . . . . . . . . . . . .74 Creating a Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 Playing Titles in the Playlist . . . . . . . . . . . . . . . . . . . . .75 Renaming a Playlist Title . . . . . . . . . . . . . . . . . . . . . . .76 Editing a Scene for the Playlist . . . . . . . . . . . . . . . . . .77 Copying a Playlist Title to the VCR . . . . . . . . . . . . . . .80 Deleting a Playlist Title from the Playlist . . . . . . . . . . .80 Disc Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . .81 Editing the Disc Name . . . . . . . . . . . . . . . . . . . . . .81 Disc Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82 Formatting a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . .82 Finalizing a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 Delete All Title Lists . . . . . . . . . . . . . . . . . . . . . . . . . . .84 Unfinalizing a disc (V/VR mode) . . . . . . . . . . . . . . . . .85 Reference Troubleshooting (DVD-VIDEO/DVD-RAM/DVD-RW/DVD-R) . . . . .87 Troubleshooting(DVD) . . . . . . . . . . . . . . . . . . . . . .88 Troubleshooting(VCR) . . . . . . . . . . . . . . . . . . . . . .89 Problems and Solutions (Display error message) . . . . . . . . . . . . . . . . . . . . .90 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .92 VCR Recording Basic VCR Recording . . . . . . . . . . . . . . . . . . . . . .65 Check Remaining Time . . . . . . . . . . . . . . . . . . . . .66 Special Recording Features . . . . . . . . . . . . . . . . .66 Copy to DVD or VCR . . . . . . . . . . . . . . . . . . . . . . .66 English - 7 Getting Started About ANYKEY . . . . . . . . . . . . . . . . . . . . . . . . . . .45 Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . .46 Selecting the Subtitle & Audio Language . . . . . . . .47 Changing the Camera Angle . . . . . . . . . . . . . . . . .48 Zooming-In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 Using the Bookmarks . . . . . . . . . . . . . . . . . . . . . .49 Using the Markers . . . . . . . . . . . . . . . . . . . . . . . . .50 Playing back an Audio CD (CD-DA) . . . . . . . . . . . .51 Playing back an MP3 CD . . . . . . . . . . . . . . . . . . . .52 Repeat Playback of an Audio/MP3 CD . . . . . . . . .53 Play Option Mode . . . . . . . . . . . . . . . . . . . . . . . . .53 To Program Tracks . . . . . . . . . . . . . . . . . . . . . . . . .54 Playing a Picture CD . . . . . . . . . . . . . . . . . . . . . . .54 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 8 Getting Started General Features Before Reading the User’s Manual The DVD-VR330 allows you to record and play high quality digital video on DVD-RAM/DVD-RW/DVD-R discs. You can record and edit digital video on DVDRAM/DVD-RW/DVD-R discs as if they were VCR tapes. Make sure to check the following terms before reading the user’s manual. High quality digital audio and video recording and playback Icon Record up to about 16-hour images with a double side 9.4 GB DVD-RAM disc, and up to about 8-hour images with a 4.7 GB DVD-RAM/DVD-RW/DVD-R disc, depending on the recording mode. Icons that will be used in manual Term Definition DVD This involves a function available in DVD or DVD-R/DVD-RW discs that have been recorded and finalized in Video Mode. RAM This involves a function available in DVD-RAM. RW This involves a function available in DVD-RW. This involves a function available in DVD-R. CD This involves a function available in a data CD (CD-R or CD-RW). JPEG This involves a function available in CD-R/-RW or DVD-R/-RW/ -RAM discs. MP3 This involves a function available in CD-R/-RW or DVD-R/-RW/ -RAM discs. Creating DVD video titles using DVD-RW/DVD-R discs With the DVD-VR330, you can create your own DVD video titles on 4.7 GB DVD-RW/DVD-R discs. A Variety of Recording Options Select an appropriate recording mode between XP, SP, LP and EP to meet your recording needs. (See page 60.) • XP mode - High quality, about 1 hour • SP mode - Standard quality, about 2 hours • LP mode - Low quality, about 4 hours • EP mode - Lower quality, about 6 or 8 hours Copying digital camcorder content using DV input jack Record digital camcorder images onto DVD-RAM/ DVD-RW/DVD-R discs or video tape using the DV input jack (IEEE 1394-4pin). (See page 61.) Caution High quality progressive scan Progressive scanning provides high resolution and flicker free video. The 10-bit 54-MHz DAC, 2D Y/C Separating circuitry and Time Base Corrector processor technology provide you with the highest image playback and recording quality. (See page 20.) Component progressive scan output video is available in both DVD and VCR modes. A variety of functions with easy-to-use user interface Integrated menu system and messaging functionality allow you to perform the desired operations easily and conveniently. With a DVD-RAM/DVD-RW(VR mode) disc, you can edit recorded images, create playlist, and edit video in specific sequence according to your needs. NOTE This involves a case where a function does not operate or settings may be cancelled. This involves tips or instructions on the page that help each function operate. One-Touch A function that can be operated button by using only one button. ANYKEY button A function that can be operated by using ANYKEY button. About the use of this user’s manual 1) Be sure to be familiar with Safety Instructions before using this product. (See pages 2~5) 2) If a problem occurs, check the Troubleshooting. (See pages 87~89) Copyright ©2006 Samsung Electronics Co. All rights reserved; No part or whole of this user’s manual may be reproduced or copied without the prior written permission of Samsung Electronics Co. 8 - English 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 9 How to use the DVD Recorder & VCR Select the disc type Recording There are two different recording methods: Direct Recording and Timer Recording. Timer recording is classified as a Date : Once, Daily or Weekly. Recording mode : XP (high quality mode), SP (standard quality mode), LP (long recording mode), and EP (extended mode). This unit can record on the following types of discs. If you want to repeatedly record on the same disc or you want to edit the disc after recording, select a rewritable DVD-RW or DVD-RAM type disc. If you want to save a recording without any changes, choose a non-rewritable DVD-R. Step 4 Step 2 Format the disc to start recording Unlike a VCR, the recorder automatically starts formatting when an unused disc is inserted. This is required for the preparation of recording on a disc. Playing You can select the title you want to play in a displayed menu and then immediately start playback. A DVD consists of sections called titles, and sub sections called chapters. During recording, a title is created between two points where you start and stop recording. Chapters will be created automatically when you finalize recording on DVD-R / DVD-RW discs in Video mode. The chapter’s length (interval between chapters) varies according to the recording mode. Using a DVD-RAM This type of disc can be formatted in DVD-Video Recording format (VR mode). You can edit recorded images and create a playlist in a specific sequence according to your requirements. Using a DVD-RW This type of disc can be formatted in either DVD-Video format (Video mode) or DVD-Video Recording format (VR mode). For an unused disc, a message that asks whether to format in VR Mode or not is displayed. You can play a video mode disc on various DVD components. A VR mode disc allows more varied editing. Using a DVD-R This type of disc can be formatted in DVD Video format. After formatting is complete, you can record on the disc. You can play this type of disc on various DVD components only when they have been finalized. ■ You can only use either the VR or Video Note Step 5 Editing a recorded disc Editing on discs is easier than conventional video tapes. The recorder supports many different edit functions, possible only with DVDs. With a simple and easy edit menu, you can operate various edit functions, such as delete, copy, rename, lock, etc., on a recorded title. Creating a playlist (DVD-RAM/-RW in VR mode) With this recorder, you can create a new playlist on the same disc and edit it without the change of the original recording. mode on a DVD-RW, but not both at the same time. ■ You can change the DVD-RW format to another format by reinitializing. It should be noted that the disc's data will be lost when changing formats. English - 9 Getting Started Step 1 Step 3 00995A-VR330_XAA-Eng1 Getting Started Step 6 2006.1.3 3:27 PM Page 10 Finalizing & Playing on other DVD components To play your DVD on other DVD components, finalizing may be necessary. First, finish all editing and recording operations, then finalize the disc. When using a DVD-RW disc in VR Mode Although finalizing is generally unnecessary when playing the disc on a VR Mode compatible component, a finalized disc should be used for playback. When using a DVD-RW disc in Video Mode The disc should be finalized first to enable playback on anything other than this recorder. No more editing or recording can be made on the disc once it has been finalized. When using a DVD-R disc You should finalize the disc to play it on a component other than this recorder. You cannot edit or record on the disc once it has been finalized. 10 - English 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 11 Description Getting Started Front Panel 1. 2. 3. 4. 5. 6. 7. 8. 10 DVD DECK DVD OPEN/CLOSE BUTTON VCR DECK VCR EJECT BUTTON POWER BUTTON VIDEO INPUT JACK (AV 2 IN) AUDIO L, R INPUT JACKS (AV 2 IN) DV INPUT JACK 11 9. 10. 11. 12. 13. 14. 15. 12 13 14 15 P.SCAN BUTTON FRONT PANEL DISPLAY DVD/VCR SELECT BUTTON COPY BUTTON CHANNEL / BUTTONS RECORD BUTTON PLAY/STILL, REW/SKIP, F.F/SKIP, STOP BUTTONS Front Panel Display 1. 2. 3. 4. 5. 6. DVD is activated. DVD-RAM is activated. DVD-R or DVD-RW is activated. Progressive Scan mode is activated. Record function is activated. VCR is activated. 10 7. DVD or CD media is loaded. 8. The time, counter position or current deck status is indicated. 9. When you set a Timer recording, this indicator appears. 10. VHS videotape is loaded. English - 11 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 12 Rear Panel Getting Started 4 5 6 9 10 11 Fan The fan always revolves when the power is on. Ensure a minimum of 4” clear space on all sides of the fan when installing the product. 1. 2. 3. 4. 5. VIDEO INPUT JACK (AV IN 1) VIDEO OUT JACK (AV OUT) AUDIO OUT JACKS (COMPONENT OUT) S-VIDEO IN/OUT JACKS ANT IN JACK Unpacking Accessories Check for the supplied accessories below. • Audio/Video Cable • RF Cable for TV • Remote Control • Batteries for Remote Control (AAA Size) • User’s Manual • Quick Guide 12 - English 6. 7. 8. 9. 10. 11. ANT OUT (TO TV) JACK AUDIO INPUT JACKS (AV IN 1) AUDIO OUT JACKS (AV OUT) DIGITAL AUDIO OUT JACK (OPTICAL) DIGITAL AUDIO OUT JACK (COAXIAL) VIDEO OUT JACKS (COMPONENT OUT) 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 13 Tour of the Remote Control 18 19 20 21 22 23 24 25 10 11 12 13 14 15 16 17 26 27 28 29 30 31 32 1. DVD Button Press this when you use a DVD. 2. TV Button Press this to operate TV. 3. POWER Button 4. NUMBER Button 5. 100+ Button Press this to select channel 100 or higher. 6. F.ADV/SKIP Button 7. Playback-related Buttons Forward/Rewind, Search, Skip, Stop, Play/Pause 8. TV Control Buttons • VOLUME Button TV volume adjustment • CHANNEL Button Press this to select a TV channel. • TRK Button Press this to remove the white line. 9. MENU Button Press this to bring up the DVD Recorder & VCR’s setup menu. 10. ENTER/DIRECTION Buttons (UP/DOWN or LEFT/RIGHT Buttons) This button functions as a toggle switch. ❚ Key Lock Function If you do not want others to operate the DVD Recorder & VCR (for example if you have programmed a timer recording) you can set the equipment to lock out all button controls. • Press and hold the INFO. button on the remote control for 5 seconds. The display will show “SAFE” when the feature is activated. • To resume normal mode, press and hold the INFO. button again for 5 seconds. “SAFE” will disappear and the DVD Recorder & VCR will operate normally. English - 13 Getting Started 11. INFO. Button Press this to display current setting or disc status. 12. TITLE LIST (DISC MENU) Button Press this to enter the TITLE LIST/Disc menu. 13. SUBTITLE Button Press this to switch the DVD’s subtitle language. 14. ANYKEY Button Press this to view the status of the disc that is being played. 15. REC Button Press this to make a recording on VCR, DVD-RAM/ -RW/-R discs. 16. DVD COPY Button Press this when you copy from the VCR to the DVD. 17. REC SPEED Button Press this to set the desired recording time and picture quality. 18. VCR Button Press this when you use a VCR. 19. INPUT SEL. Button Press this to select AV input signal in external input mode. (Tuner, AV input, DV input) 20. OPEN/CLOSE Button Press this to open and close the disc tray. 21. TV POWER Button 22. TV/VCR Button 23. MARKER Button Press this to bookmark or mark a position while playing a disc. 24. RETURN Button Returns to a previous menu. 25. AUDIO/TV MUTE Button Press this to access various audio functions. This operates as sound mute. (TV mode) 26. CANCEL Button 27. PLAY LIST(TITLE MENU) Button Press this to enter the Edit playlist/Title menu. 28. ANGLE Button Press this to access various camera angles on a disc (if the disc contains multiple camera angles). 29. ZOOM Button Zooms in on screen. 30. TIMER REC Button Press this when you use Timer Recording. 31. VCR COPY Button Press this when you copy from the DVD to the VCR. 32. REC PAUSE Button Press this to pause during recording. 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 14 Connections Connecting & Setting Up Quick Overview A Quick overview presented in this guide will give you enough information to start using the recorder. Step 1 : Connecting the Antenna Cable † Step 2 : Connecting the Video Cable † Step 3 : Connecting the Audio Cable † Step 4 : Connecting External Devices † Step 5 : Connecting the Power Cord † Step 6 : Preparing the Remote Control Quick Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Step 1: Connecting the Antenna Cable . . . . . . . . . . . . . . . . .15 Step 2 : Connecting the Video Cable . . . . . . . . . . . . . . . . . .18 Step 3 : Connecting the Audio Cable . . . . . . . . . . . . . . . . . .21 Step 4 : Connecting External Devices . . . . . . . . . . . . . . . . . .24 • Note to CATV system installer : This reminder is to call CATV system installer’s attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding Step 5 : Connecting the Power Cord . . . . . . . . . . . . . . . . . . .27 system of the building as close to the point of cable title Step 6 : Preparing the Remote Control . . . . . . . . . . . . . . . . .27 as practical. 14 - English 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 15 Step 1: Connecting the Antenna Cable There are several ways to connect your DVD Recorder & VCR. Select one of the following antenna connections that best suits you below. Antenna + DVD Recorder & VCR + TV : No Cable box ■ Note If you are using an off-air antenna that has 300ohm twin flat leads, use an external antenna connector (300-75 ohm adaptor : not supplied) to connect the antenna to the DVD Recorder & VCR. ■ Note If you have two separate antennas (one VHF and the other UHF), use a UHF/VHF combineradaptor (available at most electronics shops) to connect the antenna to the DVD Recorder & VCR. English - 15 Connections You can record non-scrambled channels by selecting the channel on the DVD Recorder & VCR. Also use this method if you watch channels without cable box. Connections 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 16 Antenna + Cable box + DVD Recorder & VCR + TV : Cable box with many scrambled channels You can record channels by selecting the channel on the cable box. You cannot record one channel while watching another channel. Be sure that the cable box is turned on. 16 - English 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 17 You can record non-scrambled channels by selecting the channel on the cable box. You cannot record scrambled channels that require a cable box. English - 17 Connections Antenna + DVD Recorder & VCR + Cable box + TV : Cable box with a few scrambled channels 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 18 Step 2 : Connecting the Video Cable There are several ways to connect your DVD Recorder & VCR. Select one of the video connections on the following pages. The VHF/UHF RF OUT jack of this product sends only signals received through the antenna. It does not output audio/video signals. You must use one of the following audio/video connections on this unit. Connections Connecting to a Video input jack Connect a video(yellow) cable between the VIDEO(yellow) OUT jack on DVD Recorder & VCR and VIDEO(yellow) IN jack on the TV (or AV amplifier). INPUT VIDEO Audio/Video Cable Yellow White AUDIO Red • You will enjoy regular quality images. • Connect audio cables(white and red) between the AUDIO OUT jacks on the DVD Recorder & VCR and AUDIO IN jacks on TV(or AV amplifier). (See pages 21 ~ 23) 18 - English 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 19 Connecting to an S-Video input jack INPUT S-VIDEO S-Video Cable (not supplied) • You will enjoy high quality images. S-Video separates the picture element into black and white (Y) and color (C) signals to present clearer images than regular video input mode. • Connect audio cables(white and red) between the AUDIO OUT jacks on the DVD Recorder & VCR and AUDIO IN jacks on TV(or AV amplifier). (See pages 21 ~ 23) ■ Note S-Video and Component video output are available only if your TV supports S-Video input or Component video input, respectively. If S-Video or Component video output does not work, check the TV connections and the TV input selection settings. English - 19 Connections Connect an S-Video cable(not supplied) between the S-VIDEO OUT jack on DVD Recorder & VCR and S-VIDEO IN jack on your TV (or AV amplifier). 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 20 Connections Connecting to Component video input jacks (Y,PB,PR) Connect Component video cables (not supplied) between the COMPONENT OUT (Y,PB,PR) jacks on DVD Recorder & VCR and COMPONENT IN (Y,PB,PR) jacks on your TV (or AV amplifier). COMPONENT Component Cable (not supplied) green • You will enjoy high quality accurate color reproduction images. Component video separates the picture element into black and White(Y), blue(PB), red(PR) signals to present most clear and clean images. • Connect audio cables(white and red) between the AUDIO OUT jacks on the DVD Recorder & VCR and AUDIO IN jacks on TV(or AV amplifier). (See pages 21 ~ 23) • Progressive scan - If the your TV supports Progressive Scan, you can enjoy higher quality video by pressing the P.SCAN button. (The component cable has to be connected.) 1. With the unit in stop mode, press the P.SCAN button on the front of the DVD Recorder & VCR. 2. The message ‘Press “Yes” to confirm Progressive scan mode. Otherwise press “No”’ will appear. Press the œ √ buttons to select Yes, and then press the ENTER button. 20 - English green blue blue PB red red PR ■ Note Compared to standard interlaced video, progressive scan doubles the amount of video lines fed to your TV, resulting in a more stable, flicker-free, and clear image than interlaced video. The progressive scan video output jack is used in progressive output mode. This is only available with TVs that support progressive scan. ■ Progressive Scan Output (480p) Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. If you experience 480p progressive scan picture problems, it is recommended that you switch the connection to the ‘standard definition’ output. If there are questions regarding TV set compatibility with this model, please contact our customer service center at 1-800-SAMSUNG. ■ Do not press the P.SCAN button if your TV does not support Progressive scan mode. Nothing will be displayed on the screen. To release the Progressive scan mode, press the P.SCAN button on the front panel . 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 21 Step 3 : Connecting the Audio Cable There are several ways to connect your DVD Recorder & VCR. Select one of the Audio connections on the following pages. Connecting to your TV Connections This connection will use your TV’s speakers. INPUT VIDEO Audio Cable Yellow White AUDIO Red English - 21 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 22 Connections Connecting to a stereo amplifier with analog input jacks If your stereo amplifier only has AUDIO INPUT jacks(L and R), use the AUDIO OUT jacks. Audio Cable Red White ANALOG AUDIO Front(L)speaker 22 - English Front(R)speaker INPUT 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 23 Connecting to an AV amplifier with a digital input jack Optical Cable (not supplied) or Coaxial Cable (not supplied) AV amplifier Digital Audio INPUT Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc. English - 23 Connections If your AV amplifier has a Dolby Digital or DTS decoder and a digital input jack, use this connection. To enjoy Dolby Digital or DTS sound, you will need to set up the audio settings. (See pages 35) 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 24 Step 4 : Connecting External Devices This allows you to connect your DVD Recorder & VCR to other external devices and view or record their outputs. Connections Connecting a VCR, Set-Top Box(STB) or DVD player to the AV IN 1 jacks Connecting a VCR or external device to AV IN 1 jacks of the DVD Recorder & VCR. You can record from connected equipment (VCR, STB or DVD). S-Video Cable (not supplied) Audio/Video Cable S-VIDEO AUDIO VIDEO OUTPUT or ■ Note 24 - English You can also use the AV 2 IN jacks on the front panel of the DVD Recorder & VCR. ■ Copy protected content cannot be recorded. 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 25 Connecting a Camcorder to the AV 2 IN jacks Audio/Video Cable VIDEO AUDIO OUTPUT Camcorder English - 25 Connections You can also use the AV 2 IN jacks on the front panel of the DVD Recorder & VCR. You can record from connected equipment, such as a camcorder. When an input source is inserted into AV 2 IN while viewing TV, the input will be switched to AV 2 IN automatically. 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 26 Connections Connecting a Camcorder to the DV IN jack If your camcorder has a DV output jack, connect it to the DV input jack of your DVD Recorder & VCR. DV Cable (not supplied) DV OUT Camcorder ■ Note 26 - English If the input is not selected automatically, use INPUT SEL. button to select proper input. 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 27 Step 5 : Connecting the Power Cord After all connections are complete, plug the power cord in the wall outlet. When the DVD Recorder & VCR operates normally, the current time is automatically set and displayed in the front panel display. Install Batteries in the Remote Control • Open the battery cover on the back of the remote control. • Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly. • Replace the battery cover. If the remote control does not operate properly: • Check the polarity + - of the batteries (Dry-Cell) • Check if the batteries are drained. • Check if the remote sensor is blocked by obstacles. • Check if there is any fluorescent lighting nearby. Dispose of batteries according to local environmental regulations. Do not put them in the household trash. English - 27 Connections “Auto” appears in the front panel display. This means that the current time is being set automatically through the antenna under connection(Auto Program). The setup may take several minutes. Step 6 : Preparing the Remote Control 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 28 Setting the Remote Control You can control part of another manufacturer’s TV functions with this remote control. • Control function buttons involve : TV POWER, INPUT SEL., VOL +/-, CH/TRK ( / ), TV MUTE, 0~9, 100+. To determine whether your television is compatible, follow the instructions below. 1. Switch your television on. 2. Point the remote control towards the television. 3. Press the TV button and enter the two-figure code corresponding to the brand of your television, by pressing the appropriate number button. Connections Brand SAMSUNG DAEWOO EMERSON GRADIENTE HITACHI JVC LG LOEWE MAGNAVOX Codes 01,14,15,23,31 19 21 30 10 11 06,08,18 28 04 MITSUBISHI 13 Brand NEWSAN NOBLEX PANASONIC RCA SANYO SHARP SONY TELEFUNKEN TOSHIBA Codes 27 25 12,24 07,29 05,20 02,16,22 03 26 09 ZENITH 17 Result: If your television is compatible with the remote control, it will switch off. It is now programmed to operate with the remote control. ■ If several codes are indicated for your Note television brand, try each one in turn until you find one that works. If you replace the remote control’s batteries, you must set the brand code again. You can then control the television using the following buttons. Button TV POWER INPUT SEL. VOL +/- Function Used to switch the television on and off. Used to select an external source. Used to adjust the volume of the television. CH/TRK ( / ) Used to select the desired channel. TV MUTE Used to toggle the sound on and off. 0~9 Used to input number directly. 100+ Used to select channels over 100. The various functions may not necessarily work Note 28 - English on all televisions. If you encounter problems, operate the television directly. 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 29 System Setup On-Screen Menu Navigation The on-screen menus allow you to enable or disable various functions on your DVD Recorder & VCR. Use the following buttons to open and navigate through the on-screen menus. DVD-Recorder Timer Record No Disc Timer Rec. Timer Record √ Setup Scheduled Record List √ ENTER MENU Button …/†,œ /√ Buttons RETURN EXIT Press this button on the remote control to open the on-screen MENU. Press again to exit the on-screen MENU. Press these buttons on the remote control to move the selection bar …/†,œ /√ to cycle through the menu options. ENTER Button RETURN Button Press this button on the remote control to confirm any new settings. On-Screen Menu Navigation..............................................29 Auto Clock Set ..................................................................30 Manual Clock Set ..............................................................31 Channel Set .......................................................................32 Auto Channel Memory.......................................................32 Press this button on the remote control to return to the previous MENU screen displayed or to exit the on-screen MENU. Channel Add/Delete ..........................................................33 RF Output Channel............................................................33 Setting Up the Language Options .....................................34 Setting Up the Audio Options ...........................................35 Setting Up the Display (Video) Options ............................36 Setting Up the Parental Control ........................................37 VCR Setting ......................................................................38 Video Input .......................................................................39 DVD EP Mode Time .........................................................40 Automatic Chapter Creator ...............................................40 Quick Recording .................................................................41 English - 29 System Setup MOVE 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 30 Press the …† buttons to select Auto Clock Set, then press the ENTER or √ button. Auto Clock Set DVD-Recorder Auto Clock Set No Disc Timer Rec. Clock Data CH : Automatic √ Setup Time Zone : Automatic √ Daylight Saving : Automatic √ This menu is used to set the current time. You need to set the time to use timer recording. MOVE You must have the antenna connected to set System Setup Note the Auto Clock. See pages 15~17 for Antenna Connections. The Clock will be automatically set when you turn off the recorder. With the unit in Stop mode/No Disc mode, press the MENU button. DVD-Recorder ENTER RETURN EXIT ■ If your clock is set to the wrong time zone or Note daylight saving, you can adjust these settings without turning off the Auto Clock Set function. Press the …† buttons to select the sub menu (Clock Data CH, Time Zone or Daylight Saving), then press the ENTER or √ button. Timer Record No Disc Timer Rec. Timer Record √ Setup Scheduled Record List √ Clock Data CH MOVE ENTER RETURN Press the …† buttons to select a channel that carries a time signal, then press the ENTER button. Select Auto to set the channel automatically. EXIT Press the …† buttons to select Setup, then press the ENTER or √ button. DVD-Recorder Clock Data CH No Disc Timer Rec. DVD-Recorder Setup Select channel : Setup Auto No Disc Timer Rec. System √ Setup Clock Set √ Channel Set √ Language √ Audio √ Video √ Parental Control MOVE ENTER MOVE ENTER DVD-Recorder Time Zone EXIT Press the …† buttons to select the time zone of your area, then press the ENTER or √ button. Select Automatic to set the time zone automatically. Clock Set DVD-Recorder No Disc Timer Rec. Auto Clock Set √ Setup Manual Clock Set √ Auto Clock Set No Disc Timer Rec. Clock Data CH Setup Time Zone Daylight Saving ENTER RETURN Automatic Atlantic Eastern Central Mountain Pacific Alaska Hawaii EXIT MOVE 30 - English EXIT √ RETURN Press the …† buttons to select Clock Set, then press the ENTER or √ button. MOVE RETURN ENTER RETURN EXIT 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 31 Daylight Saving Press the …† buttons to select Yes or No, then press the ENTER or √ button. Select Automatic to set the daylight saving automatically. DVD-Recorder Press the …† buttons to select Clock Set, then press the ENTER or √ button. DVD-Recorder Clock Set No Disc Timer Rec. Auto Clock Set √ Setup Manual Clock Set √ Auto Clock Set No Disc Timer Rec. Clock Data CH : Automatic √ Setup Time Zone : Automatic : Automatic Automatic Yes No √ Daylight Saving MOVE ENTER RETURN MOVE ENTER RETURN EXIT √ EXIT Press the …† buttons to select Manual Clock Set, then press the ENTER or √ button. DVD-Recorder Manual Clock Set Manual Clock Set No Disc Setup Month Day 01 01 Year 2006 Hour Minute AM/PM 12 00 AM SUN Press numeric keys or …† keys. MOVE ENTER RETURN EXIT If Auto Setup fails to set the DVD Recorder & VCR’s internal clock by locating a local TV station, follow these steps to set the date and time manually. Note For accurate Timer Recording, your DVD Recorder & VCR's internal clock must be set correctly. With the unit in Stop mode/No Disc mode, press the MENU button. DVD-Recorder Timer Record Press the …†œ √ buttons to select the Current Date and Current Time, then press the ENTER button. When the current time is stored in memory and then the set is powered off, the current time will appear in the front panel display. …† : Sets the value You can set the value using the number (0~9) buttons. No Disc Timer Rec. Timer Record √ Setup Scheduled Record List √ MOVE ENTER RETURN œ √: Moves to items EXIT Press the …† buttons to select Setup, then press the ENTER or √ button. DVD-Recorder Setup No Disc Timer Rec. System √ Setup Clock Set √ Channel Set √ Language √ Audio √ Video √ Parental Control MOVE ENTER √ RETURN EXIT English - 31 System Setup Timer Rec. 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 32 Channel Set Press the …† buttons to select Antenna/Cable TV, then press the ENTER or √ button. DVD-Recorder Channel Set No Disc System Setup This feature allows you to manually set the DVD Recorder & VCR’s tuner band to Antenna or Cable, whichever you connected to the Antenna In jack during initial setup. • Use this setting only if Auto Setup detected the incorrect tuner band, i.e. channels are coming in on the wrong channel numbers. Timer Record √ Scheduled Record List √ MOVE ENTER RETURN √ RF Output Channel : CH3 √ ENTER RETURN EXIT • Cable TV - Select this if the DVD Recorder & VCR is connected to a cable TV. Auto Channel Memory EXIT Press the …† buttons to select Setup, then press the ENTER or √ button. DVD-Recorder Setup No Disc Timer Rec. System √ Setup Clock Set √ Channel Set √ Language √ Audio √ Video √ Parental Control MOVE √ Channel Add/Delete • Antenna - Select this if the DVD Recorder & VCR is connected to an indoor or outdoor VHF/UHF antenna. No Disc Setup √ Auto Channel Memory Cable TV Select the Antenna or Cable TV(Signal Source) that matches the antenna connection you selected on pages 15~17. Timer Record Timer Rec. Antenna/Cable TV Antenna : Cable TV Setup MOVE With the unit in Stop mode/No Disc mode, press the MENU button. DVD-Recorder Timer Rec. ENTER √ RETURN With the unit in Stop mode/No Disc mode, press the MENU button. Press the …† buttons to select Setup, then press the ENTER or √ button. Press the …† buttons to select Channel Set, then press the ENTER or √ button. EXIT Press the …† buttons to select Channel Set, then press ENTER or √ button. DVD-Recorder Auto Channel Memory will automatically seek and store all active channels in your area. Channel Set No Disc DVD-Recorder Channel Set Timer Rec. Antenna/Cable TV Setup Auto Channel Memory √ No Disc Channel Add/Delete √ Timer Rec. Antenna/Cable TV RF Output Channel : CH3 √ Setup Auto Channel Memory √ Channel Add/Delete √ RF Output Channel : CH3 √ MOVE ENTER : Cable TV RETURN √ √ EXIT MOVE 32 - English : Cable TV ENTER RETURN EXIT 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 33 Press the …† buttons to select Auto Channel Memory, then press the ENTER or √ button. Press the …† buttons to select Channel Add/Delete, then press the ENTER or √ button. DVD-Recorder Channel Add/Delete No Disc Timer Rec. Auto Channel Memory Setup Select channel : Total channel numbers : 02/125 Saved channel : 1% Stop Add NUMBER Channel Add/Delete RETURN EXIT Press the …† or number buttons to select the channels you want to add or delete on the Select channel screen. Then, press the ENTER button. • Using …† buttons for channel selection allows the user to add/delete one channel at a time. • Using CH/TRK ( / ) buttons for channel selection jumps to the next channel memorized in Auto Channel Memory. Press the œ √ buttons to select Add or Delete, then press the ENTER button. DVD-Recorder Channel Add/Delete No Disc Timer Rec. Setup Select channel : 11 Channel is added. Use this feature if Auto Channel Memory missed a channel that you would like to add or if you wish to remove a channel. Add NUMBER With the unit in Stop mode/No Disc mode, press the MENU button. Press the …† buttons to select Setup, then press the ENTER or √ button. Press the …† buttons to select Channel Set, then press the ENTER or √ button. DVD-Recorder Channel Set No Disc Timer Rec. Antenna/Cable TV Setup Auto Channel Memory √ Channel Add/Delete √ RF Output Channel : CH3 √ MOVE ENTER : Cable TV RETURN ENTER Delete RETURN EXIT RF Output Channel When you connect the DVD Recorder & VCR to TV with RF Antenna Cable, follow the steps below to set the RF Output Channel. √ EXIT With the unit in Stop mode/No Disc mode, press the MENU button. Press the …† buttons to select Setup, then press the ENTER or √ button. English - 33 System Setup • The DVD Recorder & VCR will automatically search for all available channels in the selected tuner band. This procedure may take a few minutes to complete. • When finished, the lowest channel will be displayed. • Press ENTER button to stop or cancel scanning. ENTER Delete 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 34 Press the …† buttons to select Channel Set, then press ENTER or √ button. DVD-Recorder Press the …† buttons to select Setup, then press the ENTER or √ button. DVD-Recorder Channel Set Setup No Disc No Disc Timer Rec. Antenna/Cable TV Setup Auto Channel Memory : Cable TV √ Timer Rec. System √ √ Setup Clock Set √ √ Channel Add/Delete √ Channel Set RF Output Channel : CH3 √ Language √ Audio √ Video √ Parental Control MOVE ENTER RETURN Press the …† buttons to select RF Output Channel, then press the ENTER or √ button. DVD-Recorder MOVE EXIT Channel Set ENTER √ RETURN EXIT Press the …† buttons to select Language, then press the ENTER or √ button. Language setup menu will be displayed. System Setup No Disc Timer Rec. Antenna/Cable TV Setup Auto Channel Memory √ Channel Add/Delete √ : Cable TV RF Output Channel : CH3 CH4 MOVE ENTER RETURN √ DVD-Recorder Timer Rec. Audio : Original √ Setup Subtitle : Automatic √ Disc Menu : English √ On-Screen Menu : English √ √ EXIT MOVE Language No Disc Press the …† buttons to select CH3 or CH4, then press the ENTER or √ button. The related message will appeared on your TV screen. Change your TV channel to CH3 or CH4 to match the RF Output Channel of the recorder. ENTER RETURN EXIT Press the …† buttons to select the desired language option, press the ENTER or √ button. DVD-Recorder Language No Disc Subtitle MOVE : Original Original … : English Automatic Français Disc Menu : English Deutsch On-Screen Menu : English Español ENTER RETURN √ √ √ √ † EXIT • Audio: For the disc audio language. • Subtitle: For the disc subtitles. • Disc Menu: For the disc menu contained on the disc. • On-Screen Menu: For the on-screen menu of your DVD Recorder & VCR. If you set audio, subtitle, disc menu and on-screen menu language in advance, they will come up automatically every time you watch a movie. If the selected language is not recorded on the disc, the original pre-recorded language is selected. With the unit in Stop mode/No Disc mode, press the MENU button. Audio Setup Italiano Nederlands Korean Setting Up the Language Options Timer Rec. Press the …† buttons to select the desired language, then press the ENTER or √ button. ■ Press the RETURN or œ button to return to the Note 34 - English previous menu. Press the MENU button to exit the menu. ■ The selected language will only appear if it is supported on the disc. 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 35 Setting Up the Audio Options Allows you to setup the audio device and sound staus settings depending on the audio system in use. Digital Output 1. PCM : Converts to PCM(2CH) 48kHz audio. Select PCM when using the Analog Audio Outputs. 2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH). Select Bitstream when using the Digital Audio Outputs. Be sure to select the correct Digital Output or With the unit in Stop mode/No Disc mode, press the MENU button. Press the …† buttons to select Setup, then press the ENTER or √ button. DVD-Recorder Setup Timer Rec. System √ Setup Clock Set √ Channel Set √ Language √ Audio √ Video √ Parental Control √ MOVE ENTER RETURN Audio No Disc Timer Rec. Digital Output Setup DTS MOVE : PCM √ : Off √ Dynamic Compressiom : On √ Quick View with Audio : On √ ENTER RETURN EXIT Press the …† buttons to select the desired audio option, then press the ENTER or √ button. Press the …† buttons to select the desired item, then press the ENTER or √ button. ■ Press the RETURN or œ button to return to the Note DTS 1. Off : Doesn’t output digital signal. 2. On : Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder. When DTS soundtrack is played, sound is not Note output from Analog Audio Output. EXIT Press the …† buttons to select Audio, then press the ENTER or √ button. Audio setup menu will be displayed. DVD-Recorder no audio will be heard. previous menu. Press the MENU button to exit the menu. Dynamic Compression This is only active when a Dolby Digital signal is detected. 1. Off : You can enjoy the movie with the standard Dynamic Range. 2. On : When the Movie soundtracks are played at low volume or from small speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud. Quick View with Audio This function enables you to hear the DVD sound during fast playback (1.5X speed) or slow playback (X1/2). 1. On : Enables to hear the sound during fast playback (1.5X speed) or slow playback(X1/2). 2. Off : Disables to hear the sound during fast playback (1.5X speed) or slow playback(X1/2). English - 35 System Setup No Disc Note 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 36 Setting Up the Display(Video) Options This function allows you to setup the TV screen settings. With the unit in Stop mode/No Disc mode, press the MENU button. Press the …† buttons to select Setup, then press the ENTER or √ button. DVD-Recorder TV Aspect Depending on the type of television you have, you may want to adjust the screen setting. (aspect ratio) • 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen. • 4:3 Pan & Scan : Select this for a conventional size TV when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.) • 16:9 Wide : You can view the full 16:9 picture on your wide-screen TV. Setup System Setup No Disc Timer Rec. System √ Setup Clock Set √ Channel Set √ Language √ Audio √ Video √ Parental Control √ MOVE ENTER RETURN EXIT Press the …† buttons to select Video, then press the ENTER or √ button. Video option menu will be displayed. DVD-Recorder Video No Disc Timer Rec. TV Aspect : 16:9 Wide √ Setup Input Level : Darker √ Black Level : 7.5 IRE √ 3D Noise Reduction : Off MOVE ENTER RETURN √ EXIT Press the …† buttons to select the desired video option, then press the ENTER or √ button. Press the …† buttons to select the desired item, then press the ENTER or √ button. Input Level Adjusts the level of the input signal. • Darker : If you feel the screen is too light and you want to make the sceen darker. • Lighter : If you feel the screen is too dark and you want to make the sceen lighter. Black Level Adjusts the black level of the screen. • 7.5 IRE : This will enhance the black level for increased brightness/contrast when viewing DVDs. Select this when you want to make the screen lighter. • 0 IRE : This is the standard NTSC reference black level for consistent brightness/contrast across all sources. Select this when you want to make the screen darker. 3D Noise Reduction • Off : Normal • On : Select to remove noise from the screen. Press the RETURN or œ button to return to the Note previous menu. Press the MENU button to exit the menu. This function depends on disc type. It may not Note work for some disc types. IRE: Short for the Institute of Radio Engineers. An IRE unit is a relative unit of measure equaling 1/140th of the peak-to peak (p-p) video amplitude. 36 - English 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 37 Setting Up the Parental Control The Re-enter Password screen appears to confirm the password. Enter your password again, and then press the ENTER or √ button. DVD-Recorder Parental Control No Disc Timer Rec. Password :Off Off The Parental Control function works in conjunction with DVDs that have been assigned a rating - which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc. With the unit in Stop mode/No Disc mode, press the MENU button on the remote control. Press the …† buttons to select Setup, then press the ENTER or √ button. MOVE System √ Setup Clock Set √ Channel Set √ Language √ Audio √ Video √ Parental Control MOVE ENTER EXIT Press the …† buttons to select On, then press the ENTER or √ button. The Parental Control screen appears. previous menu. Press the MENU button to exit the menu. Refer to Troubleshooting if you forget your password. (See page 87) About the Rating Level √ RETURN EXIT Press the …† buttons to select Parental Control, then press the ENTER or √ button. DVD-Recorder RETURN Press the …† buttons to select Rating Level, then press the ENTER or √ button. DVD-Recorder Parental Control No Disc Timer Rec. Password : On √ Setup Rating Level : Level 1 Kids √ Change Password Parental Control √ No Disc Timer Rec. Setup Create the password MOVE ENTER DVD-Recorder NUMBER ENTER RETURN EXIT Parental Control No Disc EXIT Timer Rec. Password √ Setup Rating Level √ Create a 4-digit password using the 0 to 9 buttons on the remote control. DVD-Recorder RETURN MOVE Parental Control :On Level 8 Adults :Level Level71 Kids Level 6 Change Password Level 5 Level 4 Level 3 Level 2 Level 1 Kids ENTER RETURN √ EXIT No Disc Timer Rec. Setup Confirm the password NUMBER ENTER RETURN EXIT Press the …† buttons to select the rating level you want, then press the ENTER or √ button. For example, if you select up to Level 6, discs that contain Level 7, 8 will not play. A larger number indicates that the program is intended for adult use only. English - 37 System Setup Setup No Disc Timer Rec. ENTER Press the RETURN or œ button to return to the Note DVD-Recorder √ On Setup 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 38 About the Change Password VCR Setting Press the …† buttons to select Change Password, then press the ENTER or √ button. DVD-Recorder Parental Control No Disc Timer Rec. Password : On √ Setup Rating Level : Level 1 Kids √ Change Password If you want your videotapes to play automatically when you insert them, turn on Auto Play. √ Only tapes of which the Record Safety Tab are MOVE ENTER DVD-Recorder RETURN EXIT Change Password No Disc Note removed will play automatically when inserted. With the unit in Stop mode/No Disc mode, press the MENU button. Press the …† buttons to select Setup, then press the ENTER or √ button. Timer Rec. System Setup Setup NUMBER Enter the password ENTER RETURN DVD-Recorder EXIT Setup No Disc Enter the 4-digit password using the number buttons on the remote control. The ‘Confirm the password’ message will be displayed. DVD-Recorder System √ Setup Clock Set √ Channel Set √ Language √ Audio √ Video √ Parental Control MOVE ENTER √ RETURN EXIT Change Password No Disc Timer Rec. Setup Timer Rec. Confirm the password Press the …† buttons to select System, then press the ENTER or √ button. DVD-Recorder System No Disc NUMBER ENTER RETURN EXIT VCR Setup Video Input √ : AV 1 √ DVD EP Mode Time : 6 Hours √ Chapter Creator : Off √ Quick Recording : Off √ Enter your password again. MOVE Press the RETURN or œ button to return to the Note Timer Rec. previous menu. Press the MENU button to exit the menu. ENTER RETURN EXIT Press the …† buttons to select VCR, then press the ENTER or √ button. DVD-Recorder VCR No Disc Timer Rec. Tape Length : T120 √ Setup Auto Play : On √ Auto Repeat : Off √ ENTER RETURN MOVE 38 - English EXIT 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 39 Press the …† buttons to select the desired VCR option, then press the ENTER or √ button. Press the …† buttons to select the desired item, then press the ENTER or √ button. Video Input If you watch video through AV IN 1, you can choose AV 1(Composite) or S-video. Tape Length This information is usually printed on the tape box. The menu cycles through: T-120, T-160 or T-180. Once the type of cassette is set, the VCR can display the amount of time remaining on the tape when you press the INFO. button. DVD-Recorder VCR No Disc Tape Length T120 √ Setup Auto Play T160 On T180 Off √ Auto Repeat With the unit in Stop mode/No Disc mode, press the MENU button. Press the …† buttons to select Setup, then press the ENTER or √ button. DVD-Recorder √ Setup No Disc MOVE ENTER RETURN Timer Rec. System √ Setup Clock Set √ Channel Set √ Language √ Audio √ Video √ EXIT Parental Control Auto Play MOVE • Off : Auto play is disabled. • On : The VCR will automatically begin playing a video tape when it is inserted, as long as the safety tab of the cassette has been removed. ENTER √ RETURN EXIT Press the …† buttons to select System, then press the ENTER or √ button. DVD-Recorder System No Disc DVD-Recorder VCR No Disc Timer Rec. Setup Tape Length : T120 Auto Play : Off On Auto Repeat : On Off Timer Rec. VCR Setup Video Input ENTER RETURN DVD EP Mode Time : 6 Hours √ √ Chapter Creator : Off √ √ Quick Recording : Off √ ENTER RETURN EXIT EXIT Auto Repeat It sets the VCR to play a tape repeatedly (unless a tape control is activated :Stop, Fast Forward or Rewind). DVD-Recorder √ √ MOVE MOVE √ : AV 1 Press the …† buttons to select Video Input, then press the ENTER or √button. DVD-Recorder System No Disc Timer Rec. VCR Setup Video Input VCR √ :AV AV 11 √ DVD EP Mode Time :S-Video 6 Hours √ Chapter Creator : Off √ Quick Recording : Off √ No Disc Timer Rec. Tape Length : T120 √ Setup Auto Play : On √ Auto Repeat : Off Off On √ MOVE ENTER RETURN EXIT MOVE ENTER RETURN EXIT Press the …† buttons to select AV 1 or S-Video, then press the ENTER or √ button. English - 39 System Setup Timer Rec. 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 40 DVD EP Mode Time You can set the EP(Extended Play)mode’s time setting to 6 or 8hours. With the unit in Stop mode/No Disc mode, press the MENU button. Press the …† buttons to select Setup, then press the ENTER or √ button. DVD-Recorder A DVD-Video consists of ‘Titles’ and ‘Chapters’. When you record one program, it makes one Title. If you use this function, the Title will be divided into Chapters. (V mode) With a disc inserted and the unit in Stop mode, press the MENU button. Press the …† buttons to select Setup, then press the ENTER or √ button. Setup No Disc System Setup Automatic Chapter Creator Timer Rec. System √ Setup Clock Set √ Channel Set √ Language √ Audio √ DVD-RW(V) Video √ Title List System √ Parental Control √ Disc Manager Clock Set √ Channel Set √ Language √ Audio √ Video √ MOVE ENTER RETURN DVD-Recorder EXIT Timer Rec. Setup Copy Setup Parental Control Press the …† buttons to select System, then press the ENTER or √ button. Press the …† buttons to select DVD EP Mode Time, then press the ENTER or √ button. DVD-Recorder System No Disc Timer Rec. VCR Setup Video Input ENTER Hours : 8Off Quick Recording : Off Press the …† buttons to select System, then press the ENTER or √ button. Press the …† buttons to select Chapter Creator, then press the ENTER or √ button. DVD-Recorder √ System √ DVD-RW(V) √ Title List VCR Disc Manager Video Input √ RETURN EXIT √ √ : Off Off √ Quick Recording : On Off √ Copy MOVE √ : AV 1 DVD EP Mode Time : 6 Hours Chapter Creator Setup ENTER EXIT Timer Rec. MOVE √ RETURN √ : AV 1 DVD EP Mode Time : 66 Hours Hours Chapter Creator MOVE ENTER RETURN EXIT Press the …† buttons to select 6 Hours or 8 Hours, then press the ENTER or √ button. 40 - English Press the …† buttons to select On, then press the ENTER or √ button. Press the MENU button to exit the menu. Set the recording speed by pressing the REC SPEED button on the remote control (see page 59 for more information on recording speeds). 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 41 Press the REC button to start recording. The message "Do you want to create the chapter menu after this recording?" is displayed. Quick Recording Do you want to create the chapter menu after this recording? Yes If this function is set to on, both the DVD Recorder & VCR and the TV will power on at the same time, which enables you to immediatedly record a desired channel. No Press the œ √ buttons to select Yes and press the ENTER button and recording begins. In XP and SP mode, you must record at least 5 minutes to create a chapter. In LP and EP mode, 15 minutes. 10 Press the …† buttons to select Setup, then press the ENTER or √ button. DVD-Recorder To display the created titles, finalize the disc (see page 84) and then press the TITLE MENU button. The title menu will be displayed. JAN/01/2006 12:00 AM CH1 JAN/01/2006 01:00 AM CH1 Previous 11 With the unit in Stop mode/No Disc mode, press the MENU button. Timer Rec. System √ Setup Clock Set √ Channel Set √ Language √ 1/1 Audio √ JAN/01/2006 12:30 AM CH1 Video √ Parental Control MOVE JAN/01/2006 01:30 AM CH1 Top Setup No Disc Next To display the created chapters, select the desired Title and then press the DISC MENU button. The chapter menu for the selected Title will be displayed. ENTER √ RETURN EXIT Press the …† buttons to Select System, then press the ENTER or √ button. Press the …† buttons to select Quick Recording, then press the ENTER or √ button. 1/1 DVD-Recorder System No Disc Timer Rec. VCR Setup Video Input √ : AV 1 √ DVD EP Mode Time : 6 Hours √ Chapter Creator : Off √ Quick Recording : Off Off √ On Previous Top Next MOVE ENTER RETURN EXIT On DVD-RW discs, additional chapters and Note titles can be added to a finalized disc by unfinalizing and recording again.On DVD-R discs, once finalized, no additional chapters or titles can be recorded. The Automatic Chapter Creator function does CAUTION not work during Timer Recording or when you turn the power off. DVD-R discs cannot be unfinalized. Press the …† buttons to Select On, then press the ENTER or √ button. • On : The TV screen will immediately turn on when the DVD Recorder & VCR is powered on. • Off : The TV screen will turn on after 4 to 5 seconds as the DVD Recorder & VCR recognizes the inserted disk when it is powered on. English - 41 System Setup Press the STOP button to stop recording. 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 42 Before Playing Playback This section introduces basic functions of playback by disc type. Dolby Digital DTS Read the following information before playing a disc. Region code (DVD-Video only) Both the DVD Recorder & VCR and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. The Region Number for this DVD Recorder & VCR is described on the rear panel of the DVD Recorder & VCR. Digital Audio Disc types that can be played Stereo NTSC broadcast system in U.S.A, Canada, Korea, Japan,etc. MP3 Disc Types DVD-VIDEO ◆ DVD Playback AUDIO-CD Playback Before Playing ...................................................................42 Playing a Disc ...................................................................43 Using the Disc Menu and Title Menu ...............................44 Using the Search & Skip Functions ..................................44 JPEG CD-R/-RW MP3 CD-R/-RW Slow Motion Play / Step Motion Play ...............................45 About ANYKEY .................................................................45 Repeat Playback ................................................................46 DVD-RAM Selecting the Subtitle & Audio Language.........................47 Changing the Camera Angle.............................................48 Zooming-In .......................................................................48 Using the Bookmarks .......................................................49 Using the Markers ...........................................................50 DVD-RW Playing back an Audio CD (CD-DA)................................51 Playing back an MP3 CD..................................................52 Repeat Playback of an Audio/MP3 CD .............................53 Play Option Mode..............................................................53 To Program Tracks ............................................................54 Playing a Picture CD.........................................................54 ◆ VCR Playback Playing the VCR................................................................55 Tracking.............................................................................55 Special VCR Playback Features ........................................56 S-VHS Playback ...............................................................56 Variable Search System.....................................................56 42 - English DVD-R Disc Logo Recorded content Disc Shape Max. Playing Time Single sided(5”) 240 Double sided(5”) 480 AUDIO + VIDEO Single sided(3.5”) 80 Double sided(3.5”) 160 Single sided(5”) 74 AUDIO Single sided(3.5”) 20 Single sided(5”) JPEG Images Single sided(3.5”) Single sided(5”) MP3 Audio Single sided(3.5”) 1 (XP: Excellent Quality) Single-sided 2 (SP: Standard Quality) 5” (4.7GB) 4 (LP: Long Playback) 6 or 8 (EP:Extended) AUDIO + VIDEO 2 (XP: Excellent Quality) Double-sided 4 (SP: Standard Quality) 5” (9.4GB) 8 (LP: Long Playback) 12 or 16 (EP:Extended) 1 (XP: Excellent Quality) 2 (SP: Standard Quality) AUDIO + VIDEO 5” (4.7GB) 4 (LP: Long Playback) 6 or 8 (EP:Extended) 1 (XP: Excellent Quality) 2 (SP: Standard Quality) AUDIO + VIDEO 5” (4.7GB) 4 (LP: Long Playback) 6 or 8 (EP:Extended) Discs that cannot be played • DVD-Video with a region number other than “1” or “ALL” • 3.9 GB DVD-R Disc for Authoring. • DVD-RAM not recorded following the Video Recording Standard • Unfinalized DVD-R,unfinalized DVD-RW(V mode) • PAL discs • DVD-RAM/DVD-ROM/DVD+R/DVD+RW/PD/MV-Disc/ DivX Video Disc, etc •Video CD/CVD/SVCD/CD-ROM/CDV/CD-G/CD-I 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 43 This DVD Recorder & VCR can only operate Note with discs that are compatible with DVD-RAM Standard Version 2.0. Playback and/or recording may not work for some types of discs or when specific operations, such as angle change and aspect ratio adjustment, are being performed. Information about the disc is written in detail on the box. Please refer to this if necessary. Do not allow the disc to become dirty or scratched, fingerprints, dirt, dust, scratches and deposits of cigarette smoke on the recording surface may make it impossible to use the disc for recording. DVD-RAM/-RW/-R discs may not be able to play on some DVD players, depending on the player, disc and the condition of the recording. Discs with PAL programs recorded on them cannot be recorded using this product. Playing a Disc Press the OPEN/CLOSE button. Place a disc gently into the tray with the disc’s label facing up. Press OPEN/CLOSE button to close the disc tray. • Your DVD Recorder & VCR closes the disc tray and plays the disc automatically. • The recorder does not play discs automatically after being powered on initially. • When the recorder is powered on and a disc is in the tray, the unit will be activated and wait in stop status. Press the PLAY button to start playback. • If you insert an MP3 Disc, your DVD Recorder & VCR will display the file list on the screen and start playing. • If you insert a JPEG Disc, folders and files are displayed in the thumbnail picture. Press the STOP button to stop playback. Note Recorder & VCR remembers where you stopped. When you press PLAY button again, it will pick up where you left off. (unless the disc is removed or the DVD Recorder & VCR is unplugged, or if you press the STOP button twice.) This function is only applicable to DVD-VIDEO, DVD-RAM, DVD-RW, DVD-R or Audio CDs (CD-DA). Do not move your DVD Recorder & VCR while CAUTION playing, as this may cause damage to the disc. Make sure to press the OPEN/CLOSE button to open or close the disc tray. Do not push the disc tray while it is being opened or closed, as this may cause a product malfunction. Do not place foreign materials on or in the disc tray. Some functions may perform differently or be disabled depending on the disc type. If this occurs, refer to the instructions written on the disc case. Be especially careful that children's fingers are not caught between the disc tray and the tray chassis when it closes. After turning power on, it will take a few seconds until the DVD Recorder & VCR operates. English - 43 Playback When you stop playing the disc, the DVD 00995A-VR330_XAA-Eng1 2006.1.3 3:27 PM Page 44 Using the Disc Menu and Title Menu Some discs contain a dedicated menu system that allows you to select special functions for title, chapters, audio track, subtitles, film previews, information on characters, etc. For DVD-VIDEO disc Using the Search & Skip Functions Searching through a Chapter or Track During the playback, press the SEARCH œœ or √√ button on the remote control. Each time you press the SEARCH button, the playback speed will change as follows. Press the DISC MENU button to enter the disc menu of the disc. • Move to the setup menu related to playback operation. • You can select audio language and subtitle etc., provided by the disc. Playback Press the TITLE MENU button to move to the title menu of the disc. • Use this button if the disc contains more than one title. Some discs may not support the title menu functionality. FF1/FR1➝FF2/FR2➝FF3/FR3➝ FF4/FR4➝FF5/FR5➝FF6/FR6 AUDIO CD(CD-DA) ➝ X2 ➝ X4 ➝ X8 • You can scan the program in reverse order. To return to normal speed playback, press the √ll button. No sound is heard during Scan(Search) mode, Note For DVD-RAM/DVD-RW/DVD-R disc DVD-VIDEO/ DVD-RAM/DVD-RW DVD-R except CDs (CD-DA). But if ‘Quick View with Audio’ function is set to on, you can hear the sound during FF1(1.5X speed) playback in disc. Skipping Chapters or Tracks Press the TITLE LIST button to display title list. During the playback, press the lœœ or √√l button on the remote control. Title List : Title List shows a list to help you select a title. Since the title list consists of the information on video that is actually recorded, if a title is deleted, that title cannot be played again. Note Playlist : This refers to a unit of playback, which is made by selecting a desired scene in the entire Title List. When one playlist is played, only the scene selected by the user will play and then stop. Since only the information necessary for playing a desired scene is included in a playlist, even if that playlist is deleted, the original recording will not be deleted. • If you press the lœœ button If you press the lœœ button, it moves to the beginning of the chapter, track or marker(DVD-RAM, DVD-RW(VR mode) ). Pressing the button once again within 3 seconds returns to the beginning of the previous chapter, track or marker(DVD-RAM, DVD-RW(VR mode) ). • If you press the √√l button If you press the √√l button, it moves to the next chapter, track or marker(DVD-RAM,DVD-RW (VR mode) ) Skipping ahead 30 seconds During the playback, press F.ADV/SKIP button to skip ahead exactly 30 seconds. 44 - English 00995A-VR330_XAA-Eng1 2006.1.3 3:28 PM Page 45 Slow Motion Play/ Step Motion Play Slow Motion Play (DVD-VIDEO / DVD-RAM / DVD-RW / DVD-R) About ANYKEY The ANYKEY functions allows you to easily search for a desired scene by accessing title, chapter or time. You can also change the subtitle and audio settings and set some features including Repeat, Angle and Zoom. During pause mode, press the SEARCH œœ or √√ button on the remote control for more than 1 second. Moving to a scene directly using the ANYKEY • Each time you press the √√ button : l √ X 1/2 ➝ l √ X 1/4 ➝ l √ X 1/8 • If you want to move to a title or a chapter to find a desired scene. • Each time you press the œœ button : œl X 1/2 ➝ œl X 1/4 ➝ œl X 1/8 To return to normal speed playback, press the √ll button. Press the ANYKEY button during playback. Press the …† buttons to select Title, Chapter. Playback Step Motion Play (DVD-VIDEO / DVD-RAM / DVD-RW / DVD-R) DVD-Video During pause mode, press the F.ADV button on the remote control. • Each time the button is pressed, a new frame will appear. Title 1/2 Chapter 1/28 Time Subtitle 00:00:01 ENG Audio ENG Repeat Angle Off 1/1 Zoom Off MOVE D 5.1CH CHANGE To return to normal speed playback, press the √ll button. No sound is heard during Step or Slow mode. Note But if ‘Quick View with Audio’ function is set to on, You can hear the sound during forward slow(1/2) motion playback. Press the œ √ buttons or number (0~9) buttons to select the desired scene. Then, press the ENTER button. English - 45 00995A-VR330_XAA-Eng1 2006.1.3 3:28 PM Page 46 • If you want to move to a desired time to help you find a scene. Press the ANYKEY button during playback. Press the …† buttons to select Time. Select repeat mode using œ √ button. Press the ENTER button. • To make the screen disappear, press the ANYKEY or RETURN button. DVD-RAM/DVD-RW(VR mode), unfinalized Note DVD-R and unfinalized DVD-RW (Video mode) do not repeat a chapter. DVD-Video Title 1/2 Chapter 1/28 Time Subtitle 00:00:01 ENG Audio ENG Repeat Angle Off 1/1 Zoom Off MOVE 0~9 NUMBER Enter the time in the sequence of hours, minutes, and seconds using the number buttons, then press the ENTER button. Playing a Certain section Repeatedly (A-B Repeat Playback) D 5.1CH Press the ANYKEY button during playback. Press the …† buttons to select Repeat. This may not work for some discs. When an Playback Note DVD-Video Audio CD(CD-DA) or an MP3 disc is inserted, according to the disc type, the information display may not be appear. The Time Search function does not operate in some discs. To make the screen disappear, press the ANYKEY button again. Repeat Playback Title 1/2 Chapter 1/28 Time Subtitle 00:00:01 ENG Audio ENG Repeat Angle Off 1/1 Zoom Off MOVE D 5.1CH CHANGE Press the œ √ button to select A-B, then press the ENTER button. Press the ENTER button at the point where you want the repeat play to start (A) and press it again at the point where you want the repeat play to stop (B). Repeat playback of the A-B section starts. Playing Repeatedly(Repeat Playback) Repeat A-B Press the ANYKEY button during playback. Press the …† buttons to select Repeat. A-B - To return to normal playback DVD-Video Title 1/2 Chapter 1/28 Time Subtitle 00:00:01 ENG Audio ENG Repeat Angle Off 1/1 Zoom Off MOVE 46 - English Press the CANCEL button to return to normal playback. D 5.1CH If you set point (B) before five seconds has CHANGE Note lapsed, the prohibition mark ( ) will appear. CDs do not support the Repeat A-B function. 00995A-VR330_XAA-Eng1 2006.1.3 3:28 PM Page 47 Selecting the Subtitle & Audio Language Selecting the Audio language Audio languages may not work depending on the disc type. This is only available during playback. (VR mode) Using the AUDIO button (VR mode) Selecting the SUBTITLE language Subtitle languages may not work depending on the disc type. This is only available during playback. Press the AUDIO button during playback. Audio ENG Dolby Digital 5.1CH Using the SUBTITLE button Press the SUBTITLE button during playback. Subtitle ENG Press the AUDIO or …† buttons to select the desired audio language. Using the ANYKEY button Press the ANYKEY button during playback. Press the …† buttons to select Subtitle, then press the œ √ buttons to select the desired subtitle language. Press the ANYKEY button during playback. Press the …† buttons to select Audio, then press the œ √ buttons to select the desired audio language. DVD-Video 1/2 Chapter 1/28 Time Subtitle 00:00:01 ENG Audio ENG Repeat Angle Off 1/1 Zoom Off MOVE DVD-Video Title 1/2 Chapter 1/28 Time Subtitle 00:00:01 ENG Audio ENG Repeat Angle Off 1/1 Zoom Off MOVE Title D 5.1CH CHANGE D 5.1CH Audio languages may be different because CHANGE Note they are disc-specific. Some discs allow you to select the audio language for the disc menu only. The subtitle display may be different dependNote ing on the disc type. If the subtitles overlap, disable the caption function on your TV. Some discs allow you to select the language for the disc menu only. English - 47 Playback Using the ANYKEY button Press the …† buttons to select the desired subtitle language. • To make the screen disappear, then press the CANCEL or RETURN button. 00995A-VR330_XAA-Eng2 2006.1.3 3:38 PM Page 48 Changing the Camera Angle If a DVD-VIDEO contains multiple angles of a particular scene, you can use the Angle function. If the disc contains multiple angles, the ANGLE appears on the screen. Zooming-In DVD-Video Using the ANGLE button Press the ANYKEY button during playback. Press the ANGLE button, during playback. Title 1/2 Chapter 1/28 Time Subtitle 00:00:01 ENG Audio ENG Repeat Angle Off 1/1 Zoom Off MOVE Angle Playback D 5.1CH CHANGE 1/3 Press the …† button to select the desired angle. Press the …† buttons to select Zoom, then press the ENTER button. ( ) will be displayed. Press …†, œ √ buttons to move to the area you want to enlarge. Press the ENTER button. Each time the ENTER button is pressed, the picture is enlarged up to 4X(four times the normal size). Using the ANYKEY button Press the ANYKEY button during playback. Press the …† buttons to select Angle, then press the œ √ buttons or number (0~9) buttons to select the desired angle scene. DVD-Video Title 1/2 Chapter 1/28 Time Subtitle 00:00:01 ENG Audio ENG Repeat Angle Off 1/1 Zoom Off MOVE D 5.1CH CHANGE DVD-VIDEO/ DVD-RAM/DVD-RW/ DVD-R When recording is done in the EP mode, the This function is disc-dependent, and may not Note work all DVDs. This function does not work when a DVD has not been recorded with a multi-camera angle system. 48 - English normal size ➝ 2X ➝ 4X ➝ 2X ➝ normal size Note Zoom function will not be supported. (except when the recording has been done in V mode) You can also select Zoom function directly using ZOOM button on the remote control. 00995A-VR330_XAA-Eng2 2006.1.3 3:38 PM Page 49 Using the Bookmarks Playing back a Bookmark Press the MARKER button. Press the œ √ buttons to select a bookmarked scene. (V mode) Bookmark 1 2 - - - - - - - -- Set marks at scenes you want to see again so that you can start playback from the marked position. Press the MARKER button during playback. MOVE Bookmark MOVE SELECT Press the ENTER or √ll button to start playing from the selected scene. Press the MARKER button. Press the œ √ buttons to select a bookmarked scene. 1 - - - - - - - - -- Bookmark MOVE PLAY CANCEL 1 2 - - - - - - - -- RETURN MOVE Press the œ √ button to move to the next position. Press the ENTER button again when the desired scene appears. • The number 2 is displayed and the scene is memorized. Repeat above to bookmark other positions. You can bookmark up to 10 scenes. Bookmark RETURN Clearing a Bookmark RETURN Press the ENTER button when the desired scene appears. • The number 1 is displayed and the scene is memorized. Bookmark CANCEL PLAY CANCEL RETURN Press the CANCEL button to delete the selected bookmark. Bookmark 1 - - - - - - - - -- 1 2 - - - - - - - -- MOVE SELECT RETURN When the disc tray is opened and then MOVE PLAY CANCEL RETURN Note closed, bookmarks will disappear. English - 49 Playback PLAY - - - - - - - - - -- 00995A-VR330_XAA-Eng2 2006.1.3 3:38 PM Page 50 Playing back a Marker Using the Markers Press the MARKER button during playback. Press the œ √ buttons to select a marked scene. (VR mode) Marker Press the MARKER button during playback. Marker -- -- -- -- -- -- -- -- -- -- N:0 MOVE SELECT RETURN Press the ENTER button when the desired scene appears. Marker Playback 01 02 - - - - - - - -- N : 2 01 - - - - - - - - -- N : 1 PLAY CANCEL RETURN Press the ENTER or √ll button to start playing from the selected scene. • If you press the NEXT SKIP (√√l )button or the PREVIOUS SKIP(lœœ)button in marker mode, and the next or current marked point plays for shorter than three seconds, playback starts from the previous marked point. Clearing a Marker MOVE PLAY CANCEL RETURN • The number 01 is displayed and the scene is memorized. Press the œ √ button to move to the next position. Press the ENTER button again when the desired scene appears. Marker MOVE Press the MARKER button during playback. Press the œ √ buttons to select a marked scene. Press the CANCEL button to delete the selected mark. Marker 01 02 03 04 05 06 07 08 09 10 √ N : 10 Marker 01 02 03 04 05 06 07 08 09 -- 01 02 - - - - - - - -- N : 2 PLAY CANCEL N:9 RETURN • The number 02 is displayed and the scene is memorized. • DVD-RAM or DVD-RW (VR Mode) discs have the Marker function instead of the Bookmark function. The Marker function allows you to mark up to 99 scenes. Since the scenes may be displayed as many different pages, numbering is necessary. If a disc in use is encoded with Disc Protect, Markers cannot be set or deleted. Only playback is available. 50 - English MOVE PLAY CANCEL RETURN • When a marker is cleared while DVD-RAM/ DVD-RW(VR mode) is playing, marker numbers will change. For example, if the 7th marker is cleared after ten markers are registered, the marker numbers after the eighth will automatically move ahead by one and the 8th marker becomes the 7th.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-701 Modify Date : 2006:01:11 11:52:20-05:00 Create Date : 2006:01:11 11:52:10-05:00 Metadata Date : 2006:01:11 11:52:20-05:00 Format : application/pdf Document ID : uuid:fbd2cb25-8757-4284-9e63-1445ddaa7d5a Instance ID : uuid:095c47dd-a6f3-4ba0-9820-34377f1123a6 Producer : Acrobat Distiller 4.05 for Macintosh Page Count : 50EXIF Metadata provided by EXIF.tools