Samsung Electronics Co EO-MN910 BLUETOOTH MONO HEADSET User Manual

Samsung Electronics Co Ltd BLUETOOTH MONO HEADSET

User manual

Full User Manual Online:For more information, refer to the user manual at www.samsung.com/supportThe manual is available as an Adobe Acrobat le (.pdf). If you do not have Adobe Reader, you can download the free program at www.adobe.comHeadquarters:1301 East Lookout Drive Richardson, TX 75082Customer Care Center: 1-800-SAMSUNGEO-MN910GH68-xxxxxxNA. 07/2014. sampleImages and contents of this manual may differ from the product.Make sure you have the following items: headset, charging case, travel adapter, ear rubbers and user manual. The supplied items may vary. Charging the headsetThis headset has a rechargeable internal battery which is non-removable. Make sure the headset is fully charged before using it for the first time.Use only Samsung-approved chargers. Unauthorized or Non-Samsung chargers could cause damage to the headset or in extreme circumstances an explosion, it could also invalidate any warranty on the product.Charge the charging case. When it is fully charged, the indicator light is changed to blue color. 1 With fully charged case, approximately 2-3 times charging possible. Put your headset in the fully charged case and then turn on the case. 2 When the indicator light on the headset is changed to blue color, turn off the portable charger.3 Turning the headset on or offTo turn the headset on, slide the Power switch on. The blue indicator light flashes 4 times. • Turning the headset on for the first time, it will automatically enter pairing mode for approx. 3 minutes.To turn the headset off, slide the Power switch off. The indicator light flashes blue and red then • turns off.Turning the indicator light on or offThe Headset status light is there to show you the current status of your headset, but if it bothers you at night, you can turn it off.Press and hold both Volume buttons simultaneously to turn the indicator light on or off.• You cannot switch the indicator off while in pairing mode.• The indicator light will always work when the headset is turned on or off, when a call is • received, in Pairing mode and when the battery is low.Wearing the headsetDepending on which ear you are going to wear the headset, simply adjust the ear hook accordingly. If the ear rubber does not fit your ear, replace it with the other.Pairing and connecting the headset with a phonePairing and connecting the headset with a phone Enter Pairing mode. (The blue indicator light stays lit and stays for 3 minutes.)1 Press and hold the Talk button for 3 seconds. • Activate the Bluetooth feature on your phone and search for the headset (see your phone’s user 2 manual).Select the headset (EO-MN910) from the list of devices found by your phone3 If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the headset to your 4 phone. Once pairing is completed, the headset will attempt to reconnect each time you turn it on.Reconnecting the headsetIf the connection is lost while in use : Press the Talk button on the headset or use the Bluetooth menu on your phone.• Disconnecting the headsetTurn off the headset or use the Bluetooth menu on your phone.Safety informationTo prevent injury to yourself and others or damage to your device, read the safety information about your device before using the device.Do not use your device with wet hands.• Never crush or puncture the device. • Do not insert the device or supplied accessories into the eyes, ears, or mouth.• Follow all local regulations when disposing of used battery or device.• Follow all safety warnings and regulations when using your device in restricted areas - driving, hospital, • potentially explosive environments, aircraftDo not use the device during a thunderstorm. • Do not store your device in very hot or very cold areas. It is recommended to use your device at • temperatures from 5 °C to 35 °C.Do not store your device near magnetic fields.• Do not use or store your device in areas with high concentrations of dust or airborne materials.• Keep your device dry. If your device is wet, turn it off. Then, dry the device with a towel and take it to a • service centre. Do not disassemble, modify, or repair your device. If your device needs servicing, take it to a service centre. • Excessive exposure to loud sounds can cause hearing damage. Exposure to loud sounds while driving may distract your attention and cause an accident. Draft 2014-07-11
Ending a callPress the Talk button to end a call.• Options available during a call You can use the following functions during a call.Muting the microphonePress and hold the Volume up or down button to turn the microphone off so that the person with • whom you are speaking cannot hear you. When the microphone is turned off, the headset beeps at regular intervals. Press and hold the Volume up or down button again to turn the microphone back on.Transferring a call from the phone to the headsetPress the Talk button on the headset to transfer a call from the phone to the headset.• Placing a call on holdPress and hold the Talk button to place the current call on hold.• • FCCFCC ID: A3LEO-MN910This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.The device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by Samsung will void the user’s authority to operate the equipment.Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment.CopyrightCopyright © 2014 Samsung ElectronicsThis user manual is protected under international copyright laws. No part of this user manual may be reproduced, distributed, translated, or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or storing in any information storage and retrieval system, without the prior written permission of Samsung Electronics. SAMSUNG, and the SAMSUNG logo are registered trademarks of Samsung Electronics. ●Bluetooth ●® is a registered trademark of the Bluetooth SIG, Inc. worldwide. More information about Bluetooth is available at www.bluetooth.com All other trademarks and copyrights are the property of their respective owners.Using call functionsAvailable call functions may differ from phone to phone.• Operating range : • Up to 10 metresMaking a callRedialing the latest numberPress and hold the Talk button. Some phones open the call log list. Press the Talk button again to • dial the selected number.Dialing a number by voicePress the Talk button.• Answering a callPress the Talk button to answer a call when a call comes in.• Rejecting a callPress and hold the Talk button to reject a call when a call comes in.• TrademarksDraft 2014-07-11
Industry CanadaIC ID: 649E-EOMN910RSS-GEN, Sec. 7.1.3This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The term “IC:” before the certification/registration number only signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnementIndustry Canada RF Radiation Exposure Statement: Industry Canada RF Radiation Exposure Statement: This equipment complies with Industry Canada RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.RF de l'Industrie Canada d'exposition aux radiations: Cet équipement est conforme à l'exposition de l'Industrie Canada rayonnements RF limites établies pour un environnement non contrôlé. L’antenne pour ce transmetteur ne doit pas être même endroit avec d’autres émetteurs sauf conformément à l'Industrie Canada procédures de produits Multi-émetteur.

Navigation menu