Samsung Electronics Co EPNG930 WIRELESS CHARGER User Manual

Samsung Electronics Co Ltd WIRELESS CHARGER Users Manual

Users Manual

QUICK
START
GUIDE
EP-NG930
Printed in Korea
GH68-45871F Rev.1.0
L Type 02/2016
2
a
a
b
c
d
e
f
1
3
Copyright © 2016 Samsung Electronics
•
Please read this guide before using the device
to ensure safe and proper use.
•
Images may differ in appearance from the
actual product. Content is subject to change
without prior notice. You can access the
full user manual for more information. Visit
www.samsung.com
to view device information,
the user manual, and more.
•
Before using the charger stand, make sure it is
compatible with your device.
•
Your consumer rights are governed by the law
of the country in which you purchased the
product. Please contact your service provider
for more information.
Device layout
Charger coil Indicator light
Wireless charging
surface Fan vent
Phone support Charger port
Using the charger stand
1. Connect the charger to the charger stand.
Then, place a supported mobile device on the
phone support. (
1
)
4
2. When the mobile device is fully charged,
remove the mobile device from the charger
stand.
Use only Samsung-approved chargers
(5 V/2 A, 5.3 V/2 A, and 9 V/1.67 A).
•
Wireless charging covers and chargers
are sold separately.
•
The charger should remain close to the
electric socket and easily accessible
while charging.
•
Wireless charging may not work
properly if you have attached a thick
case to your mobile device. If your case
is thick, remove it before placing your
mobile device on the charger stand.
•
When a headset is connected to your
mobile device, place the mobile device
in a landscape position on the charger
stand. If you place the mobile device in
a portrait position, it may not charge.
5
Fast wireless charging
To begin fast wireless charging, place a mobile
device that supports fast wireless charging on
the charger stand. For more information, refer to
the user manual.
Use only Samsung-approved chargers
that support fast charging (EP-TA20 series
9 V/1.67 A).
The fan inside the wireless charger
operates during fast wireless charging.
The fan will not operate when this feature
is deactivated on your mobile device.
Safety information
Read all safety information before using the
device to ensure safe and proper use. To view
the full safety information, refer to the Samsung
website.
Use manufacturer-approved batteries,
chargers, accessories, and supplies
Do not touch the device with wet hands
6
Do not drop or cause an impact to the charger
or the device
The device can be used in locations with an
ambient temperature of 0°C to 35°C. You can
store the device at an ambient temperature
of -20°C to 50°C. Using or storing the device
outside of the recommended temperature
ranges may damage the device or reduce the
battery’s lifespan
Prevent the multipurpose jack, the small end
of the charger, and the fan vent from coming
into contact with conductive materials, such
as liquids, dust, metal powders, and pencil
leads
Do not cover or block the device’s fan vent
Do not allow children or animals to chew or
suck the device
Do not disassemble, modify, or repair your
device
Magnetic stripe cards, including credit cards,
phone cards, passbooks, and boarding passes,
may be damaged by magnetic fields
7
FCC Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Caution: Any changes or modifications not expressly
approved by Samsung Electronics Co., Ltd. could void the
user's authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC Radiation exposure
limits set forth for an uncontrolled environment. This
equipment must not be co-located or operating in
conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a
minimum distance of 20 cm between the radiator and your
body.
8
Industry Canada Statement
This device complies with Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
IC Radiation Exposure Statement
This equipment complies with IC radiation exposure limits
set forth for an uncontrolled environment. This equipment
must not be co-located or operating in conjunction with
any other antenna or transmitter. This equipment should
be installed and operated with a minimum distance of 20
cm between the radiator and your body.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. 'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
Déclaration d'Industrie Canada sur l'exposition aux
radiations
Cet équipement est conforme aux limites établies par
Industrie Canada en matière d'exposition aux radiations
dans un environnement non contrôlé. Cet équipement ne
doivent pas être colocalisés ou fonctionner en conjonction
avec tout autre antenne ou émetteur.
Cet équipement doit être installé et utilisé avec une
distance minimale de 20 cm entre le radiateur et votre
corps.

Navigation menu