Samsung Electronics Co GTN8020 Portable Tablet PC with Cellular/ PCS GSM/ EDGE/ WCDMA, WLAN and Bluetooth User Manual 2

Samsung Electronics Co Ltd Portable Tablet PC with Cellular/ PCS GSM/ EDGE/ WCDMA, WLAN and Bluetooth Users Manual 2

Contents

Users Manual 2

Download: Samsung Electronics Co GTN8020 Portable Tablet PC with Cellular/ PCS GSM/ EDGE/ WCDMA, WLAN and Bluetooth User Manual 2
Mirror Download [FCC.gov]Samsung Electronics Co GTN8020 Portable Tablet PC with Cellular/ PCS GSM/ EDGE/ WCDMA, WLAN and Bluetooth User Manual 2
Document ID1811055
Application IDIlodIBbTLgmMxABqGLt08A==
Document DescriptionUsers Manual 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize164.72kB (2058962 bits)
Date Submitted2012-10-09 00:00:00
Date Available2013-04-30 00:00:00
Creation Date2017-10-29 21:51:14
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-29 21:51:14
Document TitleUsers Manual 2
Document CreatorAdobe InDesign CS3 (5.0.4)

› Listen to voice mail messages
If you have set missed calls to be diverted to the voice mail
server, callers can leave voice messages when you do not
answer incoming calls. To access your voice mail inbox and
listen to your messages,
Open the application list and select Phone → Keypad,
and then tap and hold
Follow the instructions from the voice mail server.
You must save the voice mail server number before
accessing the server. Contact your service provider for
the number.
Google Mail
You can retrieve new email messages from Google Mail™
to your Inbox. When you access this application, the Inbox
screen appears. The total number of unread messages
displays in the title bar and unread messages display in bold.
● This feature may be unavailable depending on your
region or service provider.
● This Google Mail menu may be labelled differently
depending on your region or service provider.
Communication
90
› Send an email message
Open the application list and select Google Mail → .
Select the recipient field and enter an email address.
Select the subject field and enter a subject.
Select the text field and enter your email text.
● To attach a photo, select
● To remove an attached photo, select
to the right of
an attachment’s name.
Select SEND to send the message.
If you are offline or outside your service area, the
message will be held in the message thread until you
are online and inside your service area.
› View an email message
Open the application list and select Google Mail.
Select to update the message list.
Select an email message.
From the message view, use the following options:
● To create a new message, select
● To search for an email message, select
● To archive the message, select .
● To delete the message, select .
● To add a label to the message, select .
● To move to the next or previous message, scroll left or right.
Communication
91
●
●
●
●
●
●
●
●
●
●
●
●
●
To reply to the message, select .
To reply to the message including all recipients, select .
To forward the message to other people, select .
To add a star to the message, select .
To view an attachment, select VIEW. To save it to your
device, select SAVE.
To add a label to the message, select → Change labels.
To make the message as unread, select → Mark unread.
To mark the message as important, select → Mark as
important.
To hide the message, select → Mute. To move the
message to the inbox folder, select All Mail and drag the
message to Inbox.
To register the message to the spam list, select → Report
spam.
To reload the messages, select → Refresh.
To add a label to a message, select → Manage labels.
To customise the email settings, select → Settings.
Available options may vary depending on the account.
Communication
92
Email
Learn to send or view email messages via your personal or
company email account.
› Set up an email account
Open the application list and select Email.
Enter your email address and password.
Select Next (for general email accounts) or Manual setup
(for other company email accounts).
Follow the on-screen instructions.
To add more email accounts, select → Settings → Add
account and repeat steps 2-4.
When you are finished setting up the email account, the email
messages are downloaded to your device. If you have created
more than two accounts, you can switch between email
accounts. Select an account name at the top left of the screen
and select the one you want to retrieve messages from.
Communication
93
› Send an email message
Open the application list and select Email → .
Add recipients of your message.
● Enter email addresses manually, separating them with a
semicolon or a comma.
● Select email addresses from the lists by selecting
Select the subject field and enter a subject.
Select the text input field and enter your email text. You
can enter draw a sketch by selecting .
→ files to attach.
Select
to send the message.
Select
If you are offline or outside your service area, the
message will be held in the outbox until you are online
and in your service area.
› View an email message
When you open an email account, you can view previously
retrieved email offline or connect to the email server to view
new messages. After retrieving email messages, you can view
them offline.
Open the application list and select Email.
Select to update the message list.
Select an email message.
From the message view, use the following options:
● To search for an email message, select
● To create a new message, select
● To reply to the message, select
Communication
94
●
●
●
●
●
●
●
●
●
●
●
●
●
●
To reply to the message including all recipients, select .
To forward the message to other people, select .
To delete the message, select .
To add a star to the message, select .
To make the message as unread, select → Mark as
unread.
To move the message to another folder, select → Move.
To save the message, select → Save email. The message
will be saved in My Files → sdcard → Saved Email.
To view the messages by category, select → Sort by.
To change the view mode, select → View mode.
To print the message using a Wi-Fi or USB connection,
select → Print. Your device is compatible only with
some Samsung printers.
To save the email addresses of the recipients to the
phonebook as a group of contacts, select → Save as
group.
To delete all messages, select → Delete all.
To customise the email settings, select → Settings.
To save an attachment to your device, select the
attachment tab → .
The options available may vary depending on the email
account or device’s orientation.
Communication
95
Talk
Learn to chat with friends and family via Google Talk™.
This feature may be unavailable depending on your
region or service provider.
› Set your status
Open the application list and select Talk.
Add your Google account (if necessary).
Customise your status, image, and message to display.
› Add friends to your friend list
Open the application list and select Talk → .
Enter an email address of the friend and select DONE.
When your friend accepts the invitation, the friend is
added to your friend list.
› Start a chat
Open the application list and select Talk.
Select a friend from the friends list. The chat screen opens.
Enter and send your message.
● To add more friends to a chat, select → Add to chat.
● To switch between active chats, select a friend from the
friends list.
● To end the chat, select → End chat.
Communication
96
ChatON
Learn to use ChatON to send and receive instant messages
from any device that has a mobile phone number.
Open the application list and select ChatON.
If you are launching this application for the first time,
follow the on-screen instructions to complete the
account setup.
Enter and send your message.
Messenger
Learn to send and receive instant messages to friends and
family with the Google+ messenger instant messaging
service.
Open the application list and select Messenger.
If you are launching this application for the first time,
follow the on-screen instructions to complete the
account setup.
Enter and send your message.
Google+
Learn to access the Google’s social network service. You can
create groups to share interests and thoughts or send and
receive instant messages, and upload your photos.
Open the application list and select Google+.
If you are launching this application for the first time,
follow the on-screen instructions to complete the
account setup.
Select a social network feature.
Communication
97
Entertainment
Music Player
Learn to listen to your favourite music while on the go with
the music player. The music player supports the following file
formats: mp3, aac, ogg, wma, flac, m4a.
● You can also play music files in the following formats
if you open them from My files or the web browser:
mid, xmf, rtttl, imy, rtx, ota, amr, wav, mxmf.
● Some file formats are not supported depending on
the software of the device.
● If the file size exceeds the available memory, an error
can occur when you open files.
● Playback quality may vary by content type.
● Some files may not play properly depending on how
they are encoded.
› Add music files to your device
Start by transferring files to your device or memory card:
● Download from the wireless web. ► p. 64
● Download from a PC with Samsung Kies. ► p. 124
● Receive via Bluetooth. ► p. 136
● Synchronise with Windows Media Player 11. ► p. 125
● Copy to your memory card.
› Play music
After transferring music files to your device or memory card,
Open the application list and select Music Player.
Select a music category → a music file.
Entertainment
98
3
Tap the music player field.
Control playback with the virtual keys.
During playback, select to access the following options:
● To add music files to a playlist, select Add to playlist.
● To listen to music via a Bluetooth headset, select Via
Bluetooth. You cannot use this option when you connect a
headset to your device.
● To send the music file to others or share it, select Share via.
● To set the music file as various tones, select Set as.
● To search for devices that have media sharing activated
Scan for nearby devices.
● To change the music player settings, select Settings.
● You can control the music player with a headset. In
Idle mode, press and hold the headset button to
launch the music player. Press the headset button to
start or pause playback.
● You can experience virtual 5.1 surround sound when
listening to multichannel content, such as DVD
movies.
› Create a playlist
Open the application list and select Music Player.
Select → New playlist.
Enter a title for your new playlist and select OK.
To add music files to the playlist, select next to the
music files.
To delete music files from the playlist, select next to the
music files.
Select Done.
Entertainment
99
› Customise music player settings
Open the application list and select Music Player.
Select → Settings.
Adjust the following settings to customise your music
player:
Option
Function
SoundAlive
Select a sound effect.
Play speed
Change the playback speed.
Lyrics
Set to display lyrics during playback.
Music auto off
Set the music player to turn off
automatically after a specific period of
time.
Music menu
Select music categories to display on
the music library screen.
Music Hub
You can access the online music store, and search for and buy
your favourite songs. You can also add a music file to your
wish list and play downloaded music files.
This feature may be unavailable depending on your
region or service provider.
Open the application list and select Music Hub.
If you are launching this application for the first time,
check the check box next to Skip this message for 90
days, and then select Confirm.
Search for songs, and preview or buy your favourite songs.
Entertainment
100
Camera
Learn how to capture and view photos and videos.
● The camera automatically turns off when you do not
use it for a specified period.
● The memory capacity may differ depending on the
shooting scene or shooting conditions.
› Capture a photo
Open the application list and select Camera.
Aim the lens at the subject and make any necessary
adjustments.
Number
Function
Use camera shortcuts.
●
: Switch between the front and rear
camera lenses.
●
: Change the flash setting.
●
: Change the shooting mode.
●
: Apply a special effect.
●
: Adjust the exposure value.
You can add or remove shortcuts to
frequently used options. ► p. 109
Change the camera settings.
Entertainment
101
Number
Function
View the storage location.
Switch to the camcorder.
Capture a photo.
View photos you have taken.
To zoom in, place two fingers on the screen and slowly
spread them apart. To zoom out, pinch them together.
You can also zoom in or out with the Volume key.
Tap where you want to focus on the preview screen.
The focus frame moves to the place you tapped and
changes to green when the subject is in focus.
Select to take a photo.
The photo is saved automatically.
After taking photos, select the image viewer to view the
captured photos.
● To view more photos, scroll left or right. You can also tap the
screen and scroll through the thumbnails of photos at the
bottom of the screen.
● To zoom in or out, place two fingers on the screen and
slowly spread them apart or pinch them together. To return
to the original size, double-tap the screen.
● To send the photo to others, select
→ an option.
● To delete the photo, select
→ OK.
● To start a slide show, select
→ Start slideshow. Tap the
screen to stop the slide show.
● To register the faces in the photo as face tags, select
→
Face tag. ► p. 115
Entertainment
102
●
●
●
●
●
●
●
●
●
●
●
To add the photo to the clipboard, select → Copy to
clipboard.
To rotate the photo anti-clockwise, select → Rotate left.
To rotate the photo clockwise, select → Rotate right.
To crop a section from the photo, select → Crop.
To edit the photo with the image editor, select → Edit.
To set the photo as your wallpaper or a contact image,
select → Set as.
To send the photo to a person whose face is tagged in the
photo, select → Buddy photo share.
To print the photo via Wi-Fi or USB, select → Print. Your
device is compatible only with some Samsung printers.
To change the name of a file, select → Rename.
To search for devices that have media sharing activated,
select → Scan for nearby devices.
To view photo details, select → Details.
› Change the shooting mode
You can take photos with various shooting modes. To change
the shooting mode, select → Shooting mode → an
option.
Option
Function
Panorama
Take panoramic photos.
Share shot
Take a photo and send it to others via WiFi Direct.
Buddy photo
share
Send the photo to a person whose face is
tagged in the image.
Smile shot
Set the device to recognise people’s faces
and help you take photos of them when
they smile.
Cartoon
Take photos with cartoon effects.
Entertainment
103
› Customise camera settings
Before taking a photo, select
options:
to access the following
Option
Function
Edit shortcuts
Edit shortcuts to frequently-used options.
Self portrait
Switch between the front and rear camera
lenses.
Flash
Change the flash setting; You can
manually turn the flash on or off, or set
the camera to automatically use the flash
when needed.
Shooting
mode
Change the shooting mode.
Scene mode
Change the scene mode.
Exposure value
Adjust the exposure value to change the
brightness.
Focus mode
Take close-up photos or set the camera to
focus on the subject automatically.
Timer
Select the length of the delay before the
camera takes a photo.
Effects
Apply a special effect, such as sepia or
black and white tones.
Resolution
Change the resolution option.
Entertainment
104
Option
Function
White balance
Adjust the colour balance according to
lighting conditions.
ISO
Adjust the sensitivity of the imaging
sensor.
Metering
Select a type of exposure metre.
Outdoor
visibility
Activate Outdoor visibility to select an
appropriate lighting condition.
Guidelines
Display guidelines on the preview screen.
Image quality
Select a quality level for your photos.
GPS tag
Set the camera to include location
information for your photos.
● To improve GPS signals, avoid shooting
in locations where the signal may be
obstructed, such as between buildings
or in low-lying areas, or in poor weather
conditions.
● Your location may appear on your
photos when you upload them to the
web. To avoid this, deactivate the GPS
tag setting.
Set the camera to flip the image
Save as flipped automatically when you take a photo with
the front camera.
Storage
Select a memory location for saving
captured photos.
Reset
Reset camera settings.
Entertainment
105
› Record a video
Open the application list and select Camera.
Drag the slider to switch to the camcorder.
Aim the lens at the subject and make any necessary
adjustments.
Number
Function
Use camcorder shortcuts.
●
: Switch to the front camera lens and
record a video of yourself.
●
: Change the flash setting.
●
: Change the recording mode (for
attaching to a message or for saving
normally).
●
: Apply a special effect.
●
: Adjust the exposure value.
You can add or remove shortcuts to
frequently used options. ► p. 109
Change the camcorder settings.
View the storage location.
Switch to the camera.
Entertainment
106
Number
Function
Record a video.
View videos you have recorded.
To zoom in, place two fingers on the screen and slowly
spread them apart. To zoom out, pinch them together.
You can also zoom in or out with the Volume key.
Tap where you want to focus on the preview screen. The
focus frame moves to the place you tap and changes to
green when the subject is in focus.
Select to start recording.
Select to stop recording.
The video is saved automatically. To pause recording,
select .
After recording videos, select the image viewer to view the
recorded videos.
● To view more videos, scroll left or right. You can also tap the
screen and scroll through the thumbnails of videos at the
bottom of the screen.
● To play the video, select
● To send the video to others, select
→ an option.
● To delete the video, select
→ OK.
● To start a slide show, select
→ Start slideshow. Tap the
screen to stop the slide show.
● To change the name of a file, select
→ Rename.
● To view video details, select
→ Details.
Entertainment
107
› Customise camcorder settings
Before recording a video, select
options:
to access the following
Option
Function
Edit shortcuts
Edit shortcuts to frequently used options.
Self recording
Switch between the front and rear camera
lenses.
Flash
Change the flash setting; You can
manually turn the flash on or off.
Recording
mode
Change the recording mode.
Exposure value
Adjust the exposure value to change the
brightness.
Timer
Select the length of the delay before the
camera starts recording a video.
Effects
Apply a special effect, such as sepia or
black and white tones.
Resolution
Change the resolution option.
White balance
Adjust the colour balance according to
lighting conditions.
Outdoor
visibility
Activate Outdoor visibility to select an
appropriate lighting condition.
Guidelines
Display guidelines on the preview screen.
Video quality
Select a quality level for your videos.
Entertainment
108
Option
Function
Set the camcorder to flip the image
Save as flipped automatically when you record a video
with the front camera.
Storage
Select a memory location for saving
recorded videos.
Reset
Reset camcorder settings.
› Edit the shortcut icons
You can add or remove shortcuts to frequently-used options.
From the preview screen, select → Edit shortcuts.
Tap and hold an icon from the option list and drag it to the
shortcut area.
To remove shortcuts, tap and hold an icon and drag it to
the option list.
Tap the screen to return to the preview screen.
Video Player
Learn to use the video player.
● Some file formats are not supported depending on
the device’s software.
● If a file size exceeds the memory available, an error
may occur when you try to open the file.
● Playback quality may vary by content type.
● Some files may not play properly depending on how
they are encoded.
Entertainment
109
› Play a video
Open the application list and select Video Player.
Select a video.
Control playback with the following keys.
10
The above screen may differ depending on your region
or service provider.
Number
Function
Mute the video.
Change the ratio of the video screen.
Scan forwards or backwards in the file by
dragging or tapping the bar.
Restart playback; Skip to the previous file
(double-tap); Scan backwards in the file
(tap and hold).
Select a sound effect.
Entertainment
110
Number
Function
Switch to the floating screen mode; Access
video player options.
Adjust the volume.
Pause playback; Select
playback.
Insert a bookmark.
10
Skip to the next file; Scan forwards in the
file (tap and hold).
to resume
While playing a video, use the following options:
● To switch to the floating screen mode, select
. You can
move the screen by tapping and holding it. To return to the
full screen mode, tap the screen.
● To send the video to others or share it, select
→ Share
via.
● To divide the video into segments, select
→ Chapter
preview. You can search for a segment and skip directly to
that point.
● To trim a segment of the video, select
→ Trim.
● To listen to audio via a Bluetooth headset, select
→ Via
Bluetooth.
● To export the current video to Video maker, select
→
Video maker.
● To view your bookmarks, select
→ Bookmarks. This
option appears only if you have bookmarked during
playback by selecting .
Entertainment
111
●
●
●
●
To view video details, select → Details.
To set the video player to turn off automatically after a
specific period of time, select → Time set for auto
video off.
To search for devices that have media sharing activated,
select → Scan for nearby devices.
To change the video player settings, select → Settings.
› Customise video player settings
During playback, select → Settings.
Change the following options:
Option
Function
Play speed
Change the playback speed.
Subtitles
Customise the settings for a subtitle
file.
Auto play next
Set the video player to play the next
file automatically.
Colour tone
Select a colour tone.
Outdoor
visibility
Set to improve the contrast of the
display in bright sunlight.
Entertainment
112
Gallery
Learn to view photos and play videos saved in your device’s
memory.
● Avoid locking the device’s screen while playing a DivX
Video-On-Demand. Each time you lock the screen
while playing a DivX Video-On-Demand, one of your
available rental counts will be decremented.
● Some file formats are not supported depending on
the software of the device.
● If the file size exceeds the available memory, an error
can occur when you open files.
● Playback quality may vary by content type.
● Some files may not play properly depending on how
they are encoded.
› View a photo
Open the application list and select Gallery.
Select a folder → an image.
While viewing a photo, use the following options:
● To view more photos, scroll left or right.
● To zoom in or out, place two fingers on the screen and
slowly spread them apart or pinch them together. You can
also double-tap the screen. To return to the original size,
double-tap the screen.
If you activated tilting motions, you can zoom in or out
by tapping and holding two points with your fingers,
and then tilting the device back and forth.
Entertainment
113
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
To send the photo to others, select → an option.
To delete the photo, select → OK.
To start a slide show, select → Start slideshow. Tap the
screen to stop the slide show.
To register the faces in the photo as face tags, select →
Face tag.
To add the photo to the clipboard, select → Copy to
clipboard.
To rotate the photo anti-clockwise, select → Rotate left.
To rotate the photo clockwise, select → Rotate right.
To crop a section from the image, select → Crop.
To edit the photo with the image editor, select → Edit.
To set the photo as your wallpaper or a contact image,
select → Set as.
To send the photo to a person whose face is tagged in the
photo, select → Buddy photo share.
To print the photo via Wi-Fi or USB, select → Print. Your
device is compatible only with some Samsung printers.
To change the name of a file, select → Rename.
To search for devices that have media sharing activated,
select → Scan for nearby devices.
To view photo details, select → Details.
Entertainment
114
› Tag a face in an image
Learn to tag faces in your images to make calls, send
messages, and upload messages to social networks with the
face tag shortcuts.
Face recognition may fail depending on face angle, face
size, skin colour, facial expression, light conditions, or
accessories the subject is wearing.
Open the application list and select Gallery.
Select an image.
Select → Face tag → On.
Recognised faces appear in the frame.
Select a recognised face → Add name.
Select the person’s name from the contact list.
The contact is linked to the face in the image.
When the face tag appears with a name, select the face tag
and use the available options.
› Play a video
Open the application list and select Gallery.
Select a folder → a video (indicated by the icon).
Select to begin playback.
Control playback with the keys. ► p. 109
Entertainment
115
During playback, select to access the following options:
● To send the video to others or share it, select Share via.
● To divide the video into segments, select Chapter preview.
You can search for a segment and skip directly to that point.
● To trim a segment of the video, select Trim.
● To listen to audio via a Bluetooth headset, select Via
Bluetooth.
● To export the current video to Video maker, select Video
maker.
● To view your bookmarks, select Bookmarks. This option
appears only if you have bookmarked during playback by
selecting .
● To view video details, select Details.
● To search for devices that have media sharing activated,
select Scan for nearby devices.
● To change the video settings, select Settings.
Paper Artist
Learn to make images look like illustrations with fun effects or
frames. Open the application list and select Paper Artist.
● The edited image will be saved in Gallery → Paper
Picture.
● This feature may be unavailable depending on your
region or service provider.
Entertainment
116
Video Maker
You can edit videos and apply various effects.
› Create a video
Open the application list and select Video Maker.
Select (if necessary).
Select a frame theme.
Select a category.
Tap and hold a file, and then drag it to the time line in the
bottom of the screen.
● To delete images or videos, tap and hold an item, and
then drag it to the rubbish bin.
● To rearrange images or videos, tap and hold an item,
and then drag it to a new location.
● To trim a segment of an image or video, tap an item, and
then drag the brackets to the left or right.
● To add a caption to an image or video, drag the
thumbnail to place the black dotted line at the desired
point, and then select on the preview screen.
Select → a transition effect option.
When you are finished, select → Export.
Select a resolution option.
Enter a name for the video and select OK.
Entertainment
117
› Trim a segment of a video
Open the application list and select Video Maker.
Select the thumbnail in the time line and tap an item to
trim.
Move the start bracket to the point where trimming
should begin.
Move the end bracket to the point where the trimming
should end.
Save the edited video.
› Split a video
Open the application list and select Video Maker.
Select the thumbnail in the time line and tap an item to
split.
Drag it to place in the black dotted line.
Select .
Save the edited video.
› Apply an effect to a video
Open the application list and select Video Maker.
Select the thumbnail in the time line.
Select Effect → an effect option.
Save the edited video.
Entertainment
118
› Insert a drawing in a video
Open the application list and select Video Maker.
Select the thumbnail in the time line.
Drag it to place in the black dotted line.
Select on the preview screen, and then draw on the
screen with the following tools:
Icon
Function
Undo your last action.
Redo your last action.
Change the pen settings.
Change the eraser thickness.
When you are finished, select Done.
Save the edited video.
Entertainment
119
Personal information
Contacts
Learn to create and manage a list of your personal or business
contacts. You can save names, mobile phone numbers, home
phone numbers, email addresses, birthdays and more for
your contacts.
› Create a contact
Open the application list and select Contacts.
Select Contacts → .
Select a memory location.
Enter contact information.
Select Save to add the contact to memory.
You can also create a contact from the dialling screen.
Open the application list and select Phone → Keypad.
Enter a phone number and select → an option.
Enter contact information.
Select Save to add the contact to memory.
› Find a contact
Open the application list and select Contacts.
Select Contacts.
Scroll up or down the contact list.
You can also find a contact by entering a few letters in the
text input field at the top of the contact list.
Select a contact’s name.
Personal information
120
Once you find a contact, you can use the following options:
● To edit the contact information, select
● To delete the contact, select
→ OK.
● To call the contact, select
or .
● To send a message, select
● To send an email message, select
● To set the contact as your favourites, select
› Import or export contacts
You can import or export files (in vcf format) to or from your
device’s USB storage or a memory card.
Import contact files
Open the application list and select Contacts.
Select Contacts.
Select → Import/Export → Import from SD card or
Import from USB storage.
Select an option for importing a single contact file,
multiple contact files, or all contact files, and select OK.
Select contact files to import and select OK.
Export contact files
Open the application list and select Contacts.
Select Contacts.
Select → Import/Export → Export to SD card or
Export to USB storage.
Select OK to confirm.
Personal information
121
› Copy or move contacts
Copy contacts from the SIM or USIM card to your
device
Open the application list and select Contacts.
Select Contacts.
Select → Import/Export → Import from SIM card.
Select contacts and select Done.
Copy contacts from your device to the SIM or USIM
card
Open the application list and select Contacts.
Select Contacts.
Select → Import/Export → Export to SIM card.
Select contacts and select Done → OK.
› Create your namecard
Open the application list and select Contacts.
Select Contacts.
Select Set up my profile at the top of the contact list.
Enter your personal details and select Save.
You can send your namecard to others by selecting
→ Share namecard via.
Personal information
122
› Create a group of contacts
Open the application list and select Contacts.
Select Groups → .
Enter a name and customise the settings for the group.
Select Add member.
Select members from the contact list and select Done.
When you are finished, select Save.
› Set a speed dial number
Open the application list and select Contacts.
Select Contacts.
Select → Speed dial setting.
Select a location number → a contact.
You can call a speed dial number by tapping and
holding the location number on the dialling screen.
Personal information
123
Connectivity
PC connections
Learn to connect your device to a PC with a USB cable in
various USB connection modes. By connecting the device to
a PC, you can synchronise files with Windows Media Player,
transfer data to and from your device directly, and use the
Samsung Kies program.
Do not disconnect the USB cable from a PC while the
device is transferring or accessing data. Doing so may
result in data loss or damage to the device.
For best results, connect the USB cable directly to a USB
port on a PC. Data transfers may fail when using a USB
hub.
› Connect with Samsung Kies
Ensure that Samsung Kies is installed on your PC. You can
download the program from the Samsung website.
Samsung Kies will work on both Windows and
Macintosh computers.
Connect your device to a PC with a USB cable.
Samsung Kies will launch automatically. If Samsung Kies
does not launch automatically, double-click the Samsung
Kies icon on your PC.
Copy files from the PC to the device.
Refer to the Samsung Kies help for more information.
Connectivity
124
› Synchronise with Windows Media Player
Ensure that Windows Media Player is installed on your PC.
Connect your device to a PC with a USB cable.
Open Windows Media Player and synchronise music files.
› Connect as a media device
You can connect your device to a PC and access media files
stored on your device.
Connect your device to a PC with a USB cable.
Select the right side of the system bar, and then select
Connected as a media device → Media device (MTP).
Transfer files between your device and the PC.
› Connect as a camera device
You can connect your device to a PC as a camera and access
files in your device.
Use this USB connection mode when your PC does not
support the media transfer protocol (MTP) or does not
have the USB driver for your device installed.
Connect your device to a PC with a USB cable.
Select the right side of the system bar, and then select
Connected as a media device → Camera (PTP).
Transfer files between your device and the PC.
Connectivity
125
Wi-Fi
Learn to use your device’s wireless networking capabilities to
activate and connect to any wireless local area network
(WLAN) compatible with the IEEE 802.11 a/b/g/n standards.
You can connect to the internet or other network devices
anywhere an access point or wireless hotspot is available.
Your device uses a non-harmonised frequency and is
intended for use in all European countries. The WLAN
can be operated in the EU without restriction indoors,
but cannot be operated outdoors.
› Activate the Wi-Fi feature
Open the application list, select Settings, and then drag the
Wi-Fi switch to the right.
The Wi-Fi feature running in the background will
consume battery power. To preserve battery power,
activate the feature only when needed.
› Find and connect to a Wi-Fi network
Open the application list and select Settings → Wi-Fi.
The device will automatically search for available Wi-Fi
networks.
Select a network under Wi-Fi networks.
Enter a password for the network (if necessary).
Select Connect.
Connectivity
126
› Add a Wi-Fi network manually
Open the application list and select Settings → Wi-Fi →
Add Wi-Fi network.
Enter an SSID for the network and select a security type.
Set the security settings depending on the selected
security type.
Select Save.
› Connect to a Wi-Fi network using a Wi-Fi
Protected Setup (WPS)
Using WPS, you can connect to a secured network.
Connect with a WPS button
Open the application list and select Settings → Wi-Fi.
Select a network indicated as WPS available under Wi-Fi
networks.
Enter a password for the network → Connect, and then
select → WPS push button.
Press a WPS button on the access point within 2 minutes.
Connect with a WPS PIN
Open the application list and select Settings → Wi-Fi.
Select a network indicated as WPS available under Wi-Fi
networks
Enter a password for the network → Connect, and then
select → WPS PIN entry.
On the access point, enter the PIN and press the start
button.
Connectivity
127
› Set the static IP settings
Open the application list and select Settings → Wi-Fi.
Select a network under Wi-Fi networks, and then check
the check box next to Show advanced options.
Select the drop-down menu under IP settings.
Select Static.
Change the IP settings for the network such as IP address,
Gateway, Network prefix length, DNS.
Select Connect.
› Customise Wi-Fi settings
Open the application list select Setting → Wi-Fi →
→ Advanced.
Change the following options:
Option
Function
Network
notification
Set the device to notify you when an
open Wi-Fi network is available.
Keep Wi-Fi on
during sleep
Set whether or not to keep the Wi-Fi
feature active in Sleep mode.
Wi-Fi timer
Set the time to turn the Wi-Fi feature
on or off.
MAC address
View the MAC address for the device.
IP address
View the IP address for the current
network.
Connectivity
128
Wi-Fi Direct
Learn to use the Wi-Fi Direct feature to connect two devices
via Wi-Fi without requiring an access point.
This feature is activated only when Wi-Fi feature is on.
› Connect your device to another device
Open the application list and select Settings → Wi-Fi.
Drag the Wi-Fi switch to the right to turn on the Wi-Fi
network.
Select → Wi-Fi Direct.
Select Scan → a device.
When the owner of the other device accepts the
connection, the devices are connected.
› Send data via Wi-Fi
Select a file or item from an appropriate application.
Select an option for sending data via Wi-Fi.
The method for selecting an option may vary by data
type.
Search for and select another device.
› Receive data via Wi-Fi
When you receive data, it is saved to your device
automatically. Received data is saved to the ShareViaWifi
folder.
Connectivity
129
AllShare Cast
Learn to connect your device to a large screen by using an
AllShare Cast dongle, and then share your contents.
● This feature may be unavailable depending on your
region or service provider.
● Some files may be buffered while playing depending
on the network connection.
● If you specify a Wi-Fi frequency band (5 GHz or 2.4
GHz), AllShare Cast dongles may not be found or
connected.
● If you play videos or games with a TV, select an
appropriate TV mode to get the best experience with
AllShare Cast.
Open the application list and select Settings → More
settings → AllShare Cast.
Drag the AllShare Cast switch to the right.
Select a device.
When the devices are connected, you can see your
device’s display on the other’s display.
Open or play a file.
Control the display with the keys on your device.
Connectivity
130
AllShare Play
You can play and send any file between registered devices, or
registered web storage via AllShare Play.
To use the AllShare Play service, you must sign in to your
Samsung account, and register two or more devices as file
servers. The registration methods may vary depending on the
device type. To get more details about using AllShare Play,
select → FAQ.
This feature may be unavailable depending on your
region or service provider.
› Send a file
Open the application list and select AllShare Play.
Select a registered device or storage that contains media
files.
Select a media category and select the check box on a file.
Select .
Select a registered device or storage to save the file.
› Share a file
Open the application list and select AllShare Play.
Select a registered device or storage that contains media
files.
Select a media category and select the check box on a file.
Select , and then choose a share option.
Connectivity
131
› Play a file on a nearby device
●
●
Supported file formats may differ depending on
connected devices as a media player.
Some files may be buffered while playing depending
on the network connection.
Open the application list and select AllShare Play.
Select a registered device or storage that contains media
files.
Select a media category and select the check box on a file.
Select .
Select a device to use as a media player.
Control playback with the keys on your device.
› Use the Group Cast feature
You can share screens with multiple other devices that are
connected to the same Wi-Fi AP.
Open the application list and select AllShare Play.
Select a media category and select the check box on a file.
Select → Group Cast.
Enter a PIN and select Done.
Select OK to start Group Cast.
On another device, join Group Cast with the PIN.
Connectivity
132
› Manage contents on a registered device or
storage
Open the application list and select AllShare Play.
Select a registered device or storage.
View and manage your files.
› Customise AllShare Play settings
Open the application list and select AllShare Play.
Select → Settings.
Change the following options:
Option
Function
Registered
Storage
View registered storages that have
been added to AllShare Play.
Registered
Devices
View or edit devices that have been
added to AllShare Play.
Setting up web
services
Sign in to social network sites to
upload files.
Auto upload
photos from
mobile
Set to upload photos to the registered
storage automatically when you sign
in.
Video quality
settings
Set to optimise the video quality for
your device when playing videos
saved on a computer.
Lock AllShare
Play
Set to lock AllShare Play with the
password for your Samsung account.
Language
Select a display language.
About
View AllShare Play information.
Connectivity
133
Bluetooth
Bluetooth is a short-range wireless communications
technology capable of exchanging information over
a distance of about 10 m without requiring a physical
connection.
You do not need to line up the devices to beam information
with Bluetooth. If the devices are within range of one another,
you can exchange information between them even if they are
located in different rooms.
● Samsung is not responsible for the loss, interception,
or misuse of data sent or received via the Bluetooth
wireless feature.
● Always ensure that you share and receive data with
devices that are trusted and properly secured. If there
are obstacles between the devices, the operating
distance may be reduced.
● Some devices, especially those that are not tested
or approved by Bluetooth SIG, may be incompatible
with your device.
● Do not use the Bluetooth feature for illegal purposes
(for example, pirating copies of files or illegally
tapping communications for commercial purposes).
Samsung is not responsible for the repercussions of
illegal use of the Bluetooth feature.
Connectivity
134
› Turn on the Bluetooth wireless feature
Open the application list, select Settings, and then drag the
Bluetooth switch to the right.
› Find and pair with another devices
Open the application list and select Settings →
Bluetooth → Scan.
Select a device.
Select OK to match the Bluetooth PIN between two
devices. Alternately, enter a Bluetooth PIN and select OK.
When the owner of the other device enters the same
PIN or accepts the connection, pairing is complete. If the
pairing is successful, the device will automatically search
for available services.
Some devices, especially headsets or hands-free car
kits, may have a fixed Bluetooth PIN, such as 0000. If the
other device has a PIN, you must enter it.
› Send data via Bluetooth
Select a file or item from an appropriate application.
Select an option for sending data via Bluetooth.
The method for selecting an option may vary by data
type.
Search for and pair with a Bluetooth-enabled device.
Connectivity
135
› Receive data via Bluetooth
Open the application list and select Settings →
Bluetooth, and then check the check box next to your
device name.
To select the length of time that your device will be
visible, select → Visible time-out.
When prompted, enter the PIN for the Bluetooth wireless
feature and select OK (if necessary).
Select Accept to confirm the connection between two
devices.
Received data is saved to the Bluetooth folder. If you receive a
contact, it is saved to the phonebook automatically.
Mobile network sharing
Learn to set your device as a wireless modem or wireless
access point for PCs or other devices, and share your device’s
mobile network connection.
› Share your device’s mobile network via Wi-Fi
Open the application list and select Settings → More
settings → Tethering and portable hotspot →
Portable Wi-Fi hotspot.
Drag the slide bar to the right next to Portable Wi-Fi
hotspot.
Select Portable Wi-Fi hotspot.
Select Configure to configure network settings to use
your device as an access point.
Connectivity
136
Option
Function
Network SSID
View and edit the device name that
will be shown to external devices.
Hide my device
Set to prevent other devices from
locating your device.
Security
Select the security type.
Password
View or edit the network key to
prevent unauthorised access to the
network.
Show password
Set to show your password as you
enter them.
Show advanced
Select a broadcast channel.
options
When you are finished, select Save.
From another device, locate your device’s name in the
available connection list and connect to the network.
Your device shares the mobile network connection with
the other device.
You can restrict mobile network sharing to specified
devices. Select Allowed devices, create a device list,
and then select your device’s name to change the
sharing mode to Only allowed devices.
Connectivity
137
› Share your device’s mobile network via USB
Connect your device to a PC with a USB cable.
Open the application list and select Settings → More
settings → Tethering and portable hotspot.
Select USB tethering.
To stop sharing the network connection, clear the check
box next to USB tethering.
The sharing method for the network connection may
differ depending on the PC’s operating system.
GPS
Your device is equipped with a global positioning system
(GPS) receiver. Learn to activate location services.
To receive better GPS signals, avoid using your device in the
following conditions:
● Between buildings, in tunnels or underground passages, or
inside buildings
● In poor weather
● Around high voltage or electromagnetic fields
● In a vehicle with sun protection film
Do not touch or cover the antenna area with your hands
or other objects while using the GPS functions.
This feature may be unavailable depending on your
region or service provider.
Connectivity
138
› Activate location services
You must activate location services to receive location
information and search the map.
Open the application list and select Settings → Location
services.
Change the following options:
Option
Function
Use wireless
networks
Set to use Wi-Fi and/or mobile
networks for finding your location.
Use GPS
satellites
Set to use the GPS satellite for finding
your location.
Location and
Google search
Set the device to use your current
location for Google search and other
Google services.
TV connections
You can control a TV remotely with your device to browse
your favourite shows and get programming suggestions
based on your choices. You can also control other devices
connected to the TV.
› Set your device as a remote control for a TV
You must first connect your device to a Wi-Fi AP and ensure
that the device’s infrared port is facing the TV.
Open the application list and select Smart Remote.
If you are launching this application for the first time,
select Agree.
Connectivity
139
3
Rotate the device anti-clockwise to landscape orientation.
Select an option next to Set Up Smart Remote Now:
Select Choose Brand → the brand of your TV.
Select Test Power On/Off → Yes to check the connection
between your device and TV.
Select Done.
To add other devices, select Add New Device.
Control your TV or other devices with the icons on your
device.
› Customise remote control settings
Open the application list and select Smart Remote.
Select .
Change the following options:
Option
Function
Television
Change command codes if you have
problems with a particular control.
Add New
Device
Set up connections to peripheral
devices connected to the TV.
Reset Peel
Reset the connection settings.
Send Feedback
Report your opinion for application
development.
Connectivity
140
VPN connections
You can create virtual private networks (VPN) and connect to
your private network securely through a public network, such
as the internet.
● Your device should already be configured with
internet access. If you have trouble accessing the
internet, you need to edit connections. If you are not
sure about the connection information to enter, ask
your service provider.
● To use this feature, you must activate the screen lock
feature.
› Set up VPN connections
Open the application list and select Settings → More
settings → VPN → Add VPN network.
Change the following options:
Option
Function
Name
Enter a name for the VPN server.
Type
Select a VPN type.
Server address
Enter the IP address of the VPN server.
L2TP secret
Enter an L2TP secret password.
IPSec identifier Enter a user name.
IPSec preshared key
Enter a pre-shared security key.
IPSec user
certificate
Select a user certificate that the VPN
server will use to identify you. You can
import certificates from the VPN server
or download them from the Internet.
Connectivity
141
Option
Function
IPSec CA
certificate
Select a certificate authority (CA)
certificate that the VPN server will
use to identify you. You can import
certificates from the VPN server or
download them from the Internet.
IPSec server
certificate
Select a server certificate that the VPN
server will use to identify you. You can
import certificates from the VPN server
or download them from the Internet.
PPP encryption Set to encrypt data before sending it to
(MPPE)
the VPN server.
Show
advanced
options
Set to change the advanced network
settings.
The options available may vary depending on the VPN
type.
When you are finished, select Save.
› Connect to a private network
Open the application list and select Settings → More
settings → VPN.
Select a private network.
Enter the user name and password and select Connect.
Connectivity
142
Tools
Alarm
Learn to set and control alarms for important events.
› Set a new alarm
Open the application list and select Alarm → .
Set alarm details.
Check the check box next to Smart alarm to activate
simulated nature sound prior to the main alarm.
When you are finished, select Done.
› Stop an alarm
When the alarm sounds,
● To stop the alarm, drag
in any direction until it reaches
the border of the circle.
● To repeat the alarm after a specified length of time, drag
in any direction until it reaches the border of the circle.
› Delete an alarm
Open the application list and select Alarm → .
Check the check box next to an alarm, then select Delete.
● You can delete alarms by tapping and holding an
alarm and selecting Delete.
● To deactivate an alarm, select the clock icon next to
the alarm.
Tools
143
Calculator
Learn to perform mathematical calculations directly on your
device like a typical hand-held or desktop calculator.
Open the application list and select Calculator.
Use the keys that correspond to the calculator display to
perform a basic or scientific calculator.
Downloads
Learn to manage logs of files you have downloaded from the
web.
Open the application list and select Downloads.
Select a download category.
To open a downloaded file, select the log.
● To delete a log, check the check box, and then select
● To share a downloaded file to others, check the check
box, and then select .
Tools
144
Dropbox
Learn to use the Dropbox cloud storage service to save and
share your files with others. When you save files to your
Dropbox folder, your device automatically synchronise
with the web server and any other PCs that have Dropbox
installed.
If you are a new user, create an account.
› Activate Dropbox
Open the application list and select Dropbox → Start.
Enter an email address and password, and then select Log
in.
Select Next → Turn on.
› Upload files to your Dropbox folder
Open the application list and select Dropbox.
Select → Photos or videos or Other files.
Select files.
Select Dropbox → a folder.
Select Upload.
The files in the folder will be added to the web server and
your PC at home.
› View a file
Open the application list and select Dropbox →
Select a file.
Tools
145
Search
You can search for applications and data in your device and
specific data on the web.
Open the application list and select Search.
Enter a keyword and select .
To search for data by voice, select and say a keyword
into your device’s microphone.
Select a search result.
My Files
Learn to quickly and easily access all of your images, videos,
music, sound clips, and other types of files stored on your
device.
› Supported file formats
Your device supports the following file formats:
Type
Format
Image
BMP, GIF, JPG, PNG
Video
MP4, 3GP, AVI, WMV, ASF, MKV, FLV, WEBM
Music
MP3, AAC, OGG, FLAC, MP4, 3GP, M4A, WMA,
WAV, IMY, MID, XMF, OTA
●
●
●
●
Some file formats are not supported depending on
the software of the device.
If the file size exceeds the available memory, an error
can occur when you open files.
Playback quality may vary by content type.
Some files may not play properly depending on how
they are encoded.
Tools
146
› Open a file
Open the application list and select My Files.
Select a folder.
● To move up one level in the file directory, select
● To return to the top level of the file directory, select
Select a file to open.
› Create a folder
Open the application list and select My Files.
Select .
Enter a name and select Done.
› Copy or move files
Open the application list and select My Files.
Check the check box next to folders or files to copy or cut.
Select or .
Locate a folder and select .
› Send files
Open the application list and select My Files.
Check the check box next to files to send.
Select → an option.
› Delete files
Open the application list and select My Files.
Check the check box next to folders or files to delete.
Select → Yes.
Tools
147
Polaris Office
Learn to create or view Microsoft Word, Excel, PowerPoint,
and Adobe PDF files on your device.
› Create a new document
Open the application list and select Polaris Office.
If you are launching this application for the first time,
register as an online user or skip the registration.
Select → a document type.
Enter contents in the document.
● To undo your last action, select
● To redo your last action, select
● To insert an object such as image, hyperlink, and table,
select .
● To change the text or object preference, select
When you are finished, select .
Enter a name for the document and select the location to
save the document.
Select Save.
› Open a document
Open the application list and select Polaris Office.
Select Browser → a document file.
View the document as desired.
● To edit the document (word, presentation, or excel file),
tap the screen.
Tools
148
●
●
●
●
To save the document for other name, select → Save
as.
To search or replace text on the document, select →
Find&Replace.
To zoom in or out, place two fingers on the screen and
slowly spread them apart or pinch them together. You
can also select → Zoom.
To print the file using a Wi-Fi or USB connection, select
→ Print. Your device is compatible only with some
Samsung printers.
Available options may vary depending on a document
type.
› Manage documents online
Open the application list and select Polaris Office.
Select Clouds → an account.
Enter your email address and password to access your
account, and then select OK.
View and manage your documents on the server.
PS Touch
Experience core Photoshop features, such as layers, selection
tools, adjustments, filters and more to create professional
looking images from your device.
With PS Touch, you can easily combine multiple images, edit
specific elements and apply filter effects, and you can access
your content using Adobe Creative Cloud service.
Open the application list and select PS Touch.
To use Adobe Creative Cloud service, you need an
Adobe ID.
Tools
149
World Clock
Learn to view the time in another region.
Open the application list and select World Clock.
Select .
Enter a city name and select a city from the list.
You can select a city in the world map view.
Select .
To add more world clocks, repeat steps 2-4.
To apply the summer time to the clocks, tap and hold a
clock and select DST settings.
Tools
150
Settings
Access the Settings menu
1 Open the application list and select Settings.
2 Select a setting category, and then select an option.
Wi-Fi
Activate the Wi-Fi feature to connect to a Wi-Fi network and
access the Internet or other network devices.
Bluetooth
Activate the Bluetooth feature to exchange information over
short distances.
Data usage
Keep track of your data usage amount, and customise the
settings for the limitation.
● Mobile data: Set to use data connections on any mobile
network.
● Set mobile data limit: Set a limit for the mobile data usage.
● Data usage cycle: Change the settings for the limit cycle.
To use more options, select .
● Data roaming: Set to use data connections when you are
roaming.
● Restrict background data: Set to disable synchronisation
in the background while using a mobile network.
Settings
151
●
●
●
Auto-sync data: Set the device to synchronise Contacts,
S Planner, Email, Internet, and images with social network
sites automatically.
Show Wi-Fi usage: Set to show your data usage via Wi-Fi.
Mobile hotspots: Search for and use another device’s
mobile network.
More settings
Change the settings to control connections with other
devices or networks.
› Flight mode
Activate Flight mode to disable all wireless functions on your
device. You can use only non-network features.
› Mobile networks
●
●
●
●
●
Mobile data: Use to allow packet switching data networks
for network services.
Data roaming: Set to use data connections when you are
roaming.
Access Point Names: Select an access point name (APN) for
mobile networks. You can add or edit APNs. To reset your
APN settings to the factory defaults, select → Reset to
default.
Network mode: Select a network type.
Network operators:
- Search networks: Search for and select a network.
- Select automatically: Set the device to select the first
available network.
Settings
152
› Tethering and portable hotspot
●
●
●
Portable Wi-Fi hotspot: Set to use your device as a wireless
access point for other devices.
USB tethering: Set to use your device as a wireless modem
by making a USB connection with a PC.
Help: View information about using the tethering features.
› VPN
Set up and manage virtual private networks (VPNs).
› Nearby devices
●
●
●
●
●
●
●
●
File sharing: Activate media sharing to allow other DLNA
certified devices to access media files on your device.
Shared contents: Set to share your contents with other
devices.
Device name: Enter a media server name for your device.
Access control: Set which devices can access and control
your media servers.
Allowed devices list: View the list of devices that can
access your device.
Not-allowed devices list: View the list of devices that are
blocked from accessing your device.
Download to: Select a memory location for saving
downloaded media files.
Upload from other devices: Set to accept uploads from
other device.
› AllShare Cast
Activate the AllShare Cast feature and share your display with
others.
Settings
153
› Kies via Wi-Fi
Connect your device to Samsung Kies via Wi-Fi.
Blocking mode
Select features and set the device to hide or show notification
icons of them for specified periods.
Sound
Change the settings for various sounds on your device.
● Volume: Adjust the volume for various sounds on your
device.
● Vibration intensity: Adjust the vibration intensity.
● Device ringtone: Select a ringtone to alert you to incoming
calls.
● Device vibration: Set the device to vibration with custom
vibration pattern when you receive a incoming call.
● Vibrate when ringing: Set the device to vibrate and play a
ringtone for incoming calls.
● Default notifications: Select a ringtone to alert you to
events.
● Sound and vibration: Set the device to vibrate and play a
ringtone for incoming calls.
● Keytones: Set the device to sound when you enter
numbers on the dialling screen.
● Touch sounds: Set the device to sound when you select an
application or option.
● Screen lock sound: Set the device to sound when you lock
or unlock the touch screen.
● Haptic feedback: Set the device to vibrate when you
select the touch keys or when the device reacts to certain
situations.
Settings
154
Display
Change the settings to control the display and backlight on
your device.
● Wallpaper: Change the wallpaper settings.
- Home screen: Select a background image for the Home
screen.
- Lock screen: Select a background image for the locked
screen.
- Home and lock screens: Select a background image for
the Home screen and the locked screen.
● Screen Mode: Select a display mode.
● Brightness: Adjust the brightness of the display.
● Screen timeout: Select the length of time that the device
waits before turning off the display backlight.
● Smart stay: Set to prevent the display backlight from
turning off while you are looking at the display.
● Font style: Change the font type for the display text.
● Font size: Change the font size for creating or showing
items in applications.
● Quick launch: Change the quick launch application on
the system bar. The shortcut icon changes to indicate the
selected application.
Storage
View memory information for your device and memory card.
You can also format the memory card.
Formatting a memory card will permanently delete all
data from the memory location.
The actual available capacity of the internal memory is
less than the specified capacity because the operating
system and default applications occupy part of the
memory.
Settings
155
Power saving
Activate Power saving mode and change the settings for
Power saving mode.
● CPU power saving: Set the device to limit some system
resource usage.
● Screen power saving: Set the device to decrease the
brightness of the display.
● Turn off haptic feedback: Set to prevent the device from
or
, or press and hold the
vibrating when you select
Power key.
● Learn about power saving: View information for saving
battery power.
Battery
View the amount of battery power consumed by your device.
Applications manager
View and manage the applications on your device.
Location services
Change the settings for location services.
● Use wireless networks: Set to use Wi-Fi and/or mobile
networks for finding your location.
● Use GPS satellites: Set to use the GPS satellite for finding
your location.
● Location and Google search: Set the device to use your
current location for Google search and other Google
services.
Settings
156
Lock screen
Change the Lock screen mode.
● Screen lock: Activate the screen lock feature.
● Lock screen options:
The settings are applied only when you set the swipe
lock option.
- Shortcuts: Set to show and edit application shortcuts on
the locked screen.
- Information ticker: Set to show news or stock
information on the locked screen.
- Clock: Set to show the clock on the locked screen.
- Dual Clock: Set to show the dual clock on the locked
screen.
- Weather: Set to show the weather information and
change the settings for the weather display.
- Ripple effect: Set to show the ripple effect on the locked
screen.
- Help text: Set to show the help text on the locked screen.
● Owner information: Enter your information that is shown
on the locked screen.
Security
Change the settings for securing your device and the SIM or
USIM card.
● Encrypt device: Set a password to encrypt data saved on
the device. You must enter the password each time you
turn on the device.
Charge the battery before enabling this setting because
it may take more than an hour to encrypt your data.
Settings
157
●
Encrypt external SD card:
- Encrypt: Set to encrypt files when you save them to a
memory card.
- Full encryption: Set to encrypt all files on your memory
card.
- Exclude multimedia files: Set to encrypt all files except
multimedia files on your memory card.
You may not access the encrypted memory card after
the factory data reset. First, decode the memory card
before the factory data reset.
●
Remote controls: Set to allow remote control of your
device via the Internet when your device is lost or stolen.
SIM Change Alert: Activate the Find my mobile feature.
SamsungDive web page: Access the SamsungDive
website to register your Samsung account.
Set up SIM card lock:
- Lock SIM card: Set to lock the SIM or USIM card. To use
your device with the SIM or USIM card, you must enter the
PIN.
- Change SIM PIN: Change the PIN supplied with the SIM
or USIM card.
Make passwords visible: Set to show your passwords as
you enter them.
Device administrators: View the administrators you
have approved for your device. You can allow device
administrators to apply new policies to your device.
Unknown sources: Set the device to install applications
downloaded from any source. If you do not select this
option, you can install only applications downloaded from
Play Store.
●
●
●
●
●
●
Settings
158
●
●
●
Trusted credentials: Set to use certificates and credentials
to ensure the secure use of applications.
Install from device storage: Install encrypted certificates
that are stored in the USB storage.
Clear credentials: Delete credentials from the device and
reset the password.
Language and input
Change the settings for languages and text input.
› Language
Select a display language.
› Default
Select a text input method.
› Google voice typing
Activate the Google voice input feature to enter text by voice.
To change the voice input settings, select .
● Choose input languages: Select input languages for
Google voice recognition.
● Block offensive words: Set to prevent the device from
recognising offensive words in voice inputs.
● Download offline speech recognition: Download and
install language data for offline voice input.
Settings
159
› Samsung keyboard
To change the Samsung keypad settings, select .
● Input language: Select input languages to use with the
keypad.
● Predictive text: Activate XT9 mode to predict words based
on your input and show word suggestions.
● Continuous input: Set to enter text by sweeping on the
keypad.
● Handwriting: Change the settings for Handwriting mode,
such as recognition time, pen thickness, or pen colour.
● Voice input: Activate the voice input feature to enter text
by voice.
● Auto capitalisation: Set to capitalise the first letter of a
sentence automatically.
● Auto-punctuate: Set the device to insert a full stop when
you double-tap the space bar.
● Character preview: Set the device to show a preview
image of each letter you tap.
● Key-tap vibration: Set the device to vibrate when you tap
a key.
● Key-tap sound: Set the device to sound when you tap a
key.
● Tutorial: View the tutorial for using the Samsung keypad.
● Reset settings: Reset the Samsung keypad settings to the
factory defaults.
Settings
160
› Voice search
The following options are available for Google voice
recognition:
● Language: Select a language for Google voice recognition.
● SafeSearch: Select a level for filtering out explicit text and
images from voice search results.
● Block offensive words: Set to hide offensive words from
voice search results.
● Download offline speech recognition: Download and
install language data for offline voice input.
› Text-to-speech output
●
●
●
Preferred TTS engine: Select a speech synthesis engine. To
change the settings for speech synthesis engines, select .
Speech rate: Select a speed for the TTS feature.
Listen to an example: Listen to the spoken text for an
example.
› Pointer speed
Adjust the pointer speed for the mouse or trackpad
connected to your device.
Cloud
Change settings for syncing data or files with your Samsung
account or Dropbox cloud storage.
Settings
161
Back up and reset
Change the settings for managing settings and data.
● Back up my data: Set to back up your settings and
application data to the Google server.
● Backup account: Set up or edit your Google backup
account.
● Automatic restore: Set to restore your settings and
application data when you must reinstall an application.
● Factory data reset: Reset your settings to the factory
defaults and delete all your data.
Email
Manage the email account information and change the email
settings.
Add account
Add your email or SNS accounts.
Motion
Change the settings that control the motion recognition
feature on your device.
● Tilt to zoom: Set to use a tilting motion to zoom in or out
when viewing images or browsing webpages.
● Pan to move icon: Set to move an item to another page
when you tap and hold the item, and then slide the device
to the left or right.
● Pan to browse images: Set to scroll through an image
by sliding the device in any direction when the image is
zoomed in.
● Smart alert: Set the device to alert you if you have missed
calls or new messages when you pick up your device.
Settings
162
●
●
Sensitivity settings: Adjust the reaction speed for each
motion.
Learn about motions: View the tutorial for controlling
motions.
S Pen
Change the settings for using the S Pen.
● Pen attach/detach sound: Set the device to emit a sound
when the S Pen is inserted or pulled out from the slot.
● Battery saving: Set the screen not to respond when
inserting or removing the S Pen.
● Options after detaching pen: Set to show a pop-up
window and emit an alert sound when the S Pen is no
longer near the device.
● Air View: Set to show the S Pen pointer when the S pen is
hovering over the screen.
● Sound and haptic feedback: Set the device to emit a
sound and vibrate when the Air View feature is activated.
● Quick Command settings: Configure the settings for Quick
Command.
Accessory
●
●
Dock sound: Set the device to play a sound when your
device is connected to or removed from a desktop dock.
Audio output: Select a sound output format to use when
connecting your device to HDMI devices. Some devices
may not support the surround sound setting.
Settings
163
Date and time
Change the settings to control how time and date appears on
your device.
If the battery remains fully discharged or removed from
the device, the time and date will be reset.
●
●
●
●
●
●
●
Automatic date and time: Set to receive time information
from the network and update the time and date
automatically.
Set date: Set the current date manually.
Set time: Set the current time manually.
Automatic time zone: Set to receive time zone information
from the network when you move across time zones.
Select time zone: Select a time zone.
Use 24-hour format: Set to show the time in 24-hour
format or 12-hour format.
Select date format: Select a date format.
Accessibility
Accessibility services are special features for those with
physical challenges. Change the settings to improve
accessibility to the device’s interface and features.
● Auto-rotate screen: Set the interface to rotate
automatically when you rotate the device.
● Speak passwords: Set the device to read aloud passwords
you enter on websites with TalkBack.
● The power key ends calls: Set to end a call when you press
the Power key.
● Accessibility shortcut: Add a shortcut to accessibility
settings that appears when you press and hold the Power
key.
Settings
164
●
●
●
●
●
●
●
●
TalkBack: Activate TalkBack, which provides voice
feedback.
Screen timeout: Select the length of time that the device
waits before turning off the display backlight.
Font size: Change the font size for creating or showing
items in applications.
Negative colours: Reverse the display colours to improve
visibility.
Install web scripts: Set applications to install web scripts to
make their web content more accessible.
Mono audio: Enable mono sound when you listen to audio
with one earbud.
Turn off all sounds: Mute all device sounds.
Tap and hold delay: Set the recognition time for tapping
and holding the screen.
Developer options
Change the settings for application development.
● Desktop backup password: Set a password to secure your
backup data.
● Stay awake: Set the screen to remain on while you are
charging the battery.
● HDCP checking settings: Set the device to check HDCP
settings in files or other content you operated.
● Protect SD card: Set to request a confirmation when
reading data from a memory card.
● USB debugging: Activate USB debugging mode to
connect your device to a computer with a USB cable.
● Allow mock locations: Allow mock locations and service
information to be sent to a Location Manager service for
testing.
Settings
165
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Select debug app: Select applications to debug and
prevent errors when you pause debugging.
Wait for debugger: Set to prevent the selected application
from loading until the debugger is ready.
Show touches: Set to show the pointer when you touch
the screen.
Show Pointer location: Set to show the coordinates and
traces of the pointer when you touch the screen.
Show layout bounds: Set to show boundaries.
Show GPU view updates: Set to flash areas of the screen
when they are updated with the GPU.
Show screen updates: Set to flash areas of the screen
when they are updated.
Window animation scale: Select a speed for opening and
closing pop-up windows.
Transition animation scale: Select a speed for switching
between screens.
Animator duration scale: Select how long pop-up
windows will be shown.
Disable HW overlays: Set to hide hardware overlays.
Force GPU rendering: Set to use 2D hardware acceleration
to improve graphic performance.
Strict mode: Set the device to flash the screen when
applications perform long operations.
Show CPU usage: Set to list all active processes.
Profile GPU rendering: Set to check the time of GPU
rendering time.
Enable traces: Set to capture traces of application and
system performance.
Do not keep activities: Set to end a running application
when you launch a new application.
Limit background processes: Set to limit the number of
processes that can run in the background.
Show all ANRs: Set the device to alert you to unresponsive
applications that are running in the background.
Settings
166
About device
View information about your device, such as model number
and version.
You can download and install firmware update with
the firmware over-the-air (FOTA) service. To check for
firmware updates, select Software update → Update.
Settings
167
Troubleshooting
When you turn on your device or while you are
using the device, it prompts you to enter one of the
following codes:
Code
Try this to solve the problem:
Password
When the device lock feature is enabled, you
must enter the password you set for the device.
PIN
When using the device for the first time or
when the PIN requirement is enabled, you
must enter the PIN supplied with the SIM or
USIM card. You can disable this feature by
using the Lock SIM card menu.
PUK
Your SIM or USIM card is blocked, usually as a
result of entering your PIN incorrectly several
times. You must enter the PUK supplied by
your service provider.
PIN2
When you access a menu requiring the PIN2,
you must enter the PIN2 supplied with the SIM
or USIM card. For details, contact your service
provider.
Your device displays network or service error
messages
●
●
When you are in areas with weak signals or poor reception,
you may lose reception. Move to another area and try
again.
You cannot access some options without a subscription.
Contact your service provider for more details.
Troubleshooting
168
The touch screen responds slowly or improperly
If your device has a touch screen and the touch screen is not
responding properly, try the following:
● Remove any protective covers from the touch screen.
Protective covers may prevent the device from recognising
your inputs and are not recommended for touch screen
devices.
● Ensure that your hands are clean and dry when tapping the
touch screen.
● Restart your device to clear any temporary software bugs.
● Ensure that your device software is upgraded to the latest
version.
● If the touch screen is scratched or damaged, take it to your
local Samsung Service Centre.
Your device freezes or has fatal errors
If your device freezes or hangs, you may need to close
programs or reset the device to regain functionality. If your
device is frozen and unresponsive, press and hold the Power
key for 8-10 seconds. The device will reboot automatically.
If this does not solve the problem, perform a factory data
reset. Open the application list and select Settings → Back
up and reset → Factory data reset → Reset device →
Erase everything.
Calls are being dropped
When you are in areas with weak signals or poor reception,
you may lose your connection to the network. Move to
another area and try again.
Outgoing calls are not connected
●
●
Ensure that you have pressed the Dial key.
Ensure that you have accessed the right cellular network.
Troubleshooting
169
Incoming calls are not connected
●
●
Ensure that your device is turned on.
Ensure that you have accessed the right cellular network.
Others cannot hear you speaking on a call
●
●
●
Ensure that you are not covering the built-in microphone.
Ensure that the microphone is close to your mouth.
If using a headset, ensure that it is properly connected.
Audio quality is poor
●
●
Ensure that you are not blocking the device’s internal
antenna.
When you are in areas with weak signals or poor reception,
you may lose reception. Move to another area and try
again.
When dialling from contacts, the call is not connected
●
●
Ensure that the correct number is stored in the contact list.
Re-enter and save the number, if necessary.
The device beeps and the battery icon is empty
Your battery is low. Recharge the battery to continue using
the device.
The battery does not charge properly or the device
turns off
If the battery will no longer charge completely, you need to
replace it with a new battery. Take your device to your local
Samsung Service Centre.
Troubleshooting
170
Your device is hot to the touch
When you use applications that require more power or use
applications on your device for an extended period of time,
your device may feel hot to the touch. This is normal and
should not affect your device’s lifespan or performance.
Error messages appear when launching the camera
Your Samsung mobile device must have sufficient available
memory and battery power to operate the camera
application. If you receive error messages when launching the
camera, try the following:
● Charge the battery.
● Free some memory by transferring files to a PC or deleting
files from your device.
● Restart the device. If you are still having trouble with
the camera application after trying these tips, contact a
Samsung Service Centre.
Error messages appear when opening music files
Some music files may not play on your Samsung mobile
device for a variety of reasons. If you receive error messages
when opening music files on your device, try the following:
● Free some memory by transferring files to a PC or deleting
files from your device.
● Ensure that the music file is not Digital Rights Management
(DRM)-protected. If the file is DRM-protected, ensure that
you have the appropriate license or key to play the file.
● Ensure that your device supports the file type.
Troubleshooting
171
Another Bluetooth device is not located
●
●
●
Ensure that the Bluetooth wireless feature is activated on
your device.
Ensure that the Bluetooth wireless feature is activated on
the device you wish to connect to, if necessary.
Ensure that your device and the other Bluetooth device are
within the maximum Bluetooth range (10 m).
If the tips above do not solve the problem, contact a Samsung
Service Centre.
A connection is not established when you connect
the device to a PC
●
●
●
●
Ensure that the USB cable you are using is compatible with
your device.
Ensure that you have the proper drivers installed and
updated on your PC.
If you are a Windows XP user, ensure that you have
Windows XP Service Pack 3 or higher installed on your PC.
Ensure that you have Samsung Kies 2.0 or Windows Media
Player 10 or higher installed on your PC.
Troubleshooting
172
Index
access codes 168
alarms
camera
capturing photos 101
customising
camcorder 108
customising camera 103,
104
recording videos 106
creating 143
deactivating 143
stopping 143
AllShare Cast 130
AllShare Play 131
auto rejection 82
battery
connectivity
AllShare Play 131
Bluetooth 134
GPS connections 138
mobile network
sharing 136
PC connections 124
VPN connections 141
Wi-Fi 126
charging 13
Bluetooth
activating 135
receiving data 136
sending data 135
brightness, display 33
call forwarding 82
call log 84
calls
contacts
copying 122
creating 120
importing or exporting 121
device
answering 78
forwarding 82
international numbers 79
multiparty 80
rejecting 78
using headset 79
using options during
voice 80
viewing missed 81
waiting 84
customising 32
indicator icons 21
keys 21
layout 19
notifications panel 30
settings 151
turning on or off 18
download manager 144
email
call waiting 84
sending 94
setting accounts 93
viewing 94
Index
173
file manager
multimedia messages
copying or cutting files 147
deleting files 147
opening files 147
supported file formats 146
sending 89
viewing 89
music hub 100
music player
find my mobile 36
fixed dialling number
mode 83
Google Latitude 72
Google Mail 90
Google Maps 71
Google Now 75
Google Talk 96
Local 73
map
creating playlists 99
playing music 98
navigation 73
PC connections
mass storage 125
Samsung Kies 124
Windows Media Player 125
phonebook
creating contacts 120
finding contacts 120
photos
getting directions 72
searching for locations 71
sharing locations with
friends 72
using navigation 73
capturing 101
viewing 113
PIN lock 36
Play Books 68
Polaris Office 148
Quick Command
memory card
formatting 17
inserting 15
removing 17
changing gestures 62
creating gestures 62
menu screen
Samsung Apps 74
Samsung Kies 124
silent mode 32
SIM/USIM card
accessing 31
messages
accessing voice mail 90
sending email 94
sending multimedia 89
sending text 88
setting email accounts 93
installing 12
locking 36
S Note 49
Index
174
S Pen 40
S Pen Air View 63
S Planner 59
S Suggest 75
text input 37
text messages
voice mail 90
VPN connections
connecting to 142
creating 141
web browser
adding bookmarks 67
browsing web pages 64
sending 88
viewing 89
Wi-Fi
activating 126
finding and connecting to
networks 126
using WPS 127
time and date, set 32
touch screen
locking 25
using 24
world clock 150
YouTube
unpack 12
video calls
uploading videos 70
watching videos 70
answering 78
making 77
using options 81
video editor 117
video maker 117
video player 115
videos
playing 109, 115
recording 106
voice calls
answering 78
making 77
using options 80
Index
175
Health and safety information
Exposure to Radio Frequency (RF) Signals
Your wireless device is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
exposure limits for radio frequency (RF) energy set by
the Federal Communications Commission (FCC) of the
U.S. government. These FCC exposure limits are derived
from the recommendations of two expert organizations,
the National Counsel on Radiation Protection and
Measurement (NCRP) and the Institute of Electrical
and Electronics Engineers (IEEE). In both cases, the
engineering experts drawn from industry, government,
requires wireless devices to comply with a safety limit
of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure
limit incorporates a substantial margin of safety to give
additional protection to the public and to account for
any variations in measurements.
For typical operations, this model has been
tested and meets the FCC exposure guidelines.
SAR tests are conducted using recommended operating
positions accepted by the FCC with the device
SAR information on this and other models can
be viewed on-line at http://www.fcc.gov/oet/ea/fccid/.
This site uses the FCC ID number A3LGTN8020 .
tested frequency bands. Although the SAR is determined
of the device while operating can be well below the
maximum value. This is because the device is designed
to operate at multiple power levels so as to use only the
power required to reach the network. In general, the
closer you are to a wireless base station antenna, the
lower the power output.
Operating Environment
Remember to follow any special regulations in force in
any area and always switch your device
forbidden to use it, or when it may cause interference or
danger. When connecting the device or any accessory to
another device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
You can check the FCC ID on the rear case.
Once you have the FCC ID number for a particular device,
follow the instructions on the website and it should
provide values for typical or maximum SAR for
a particular device
SAR information can also be obtained at www.fcc.gov/
cgb/sar.
Before a new model device is available for sale to the
The exposure limit set by the FCC for wireless mobile
devices employs a unit of measurement known as the
the rate of absorption of RF energy by the human body
expressed in units of watts per kilogram (W/kg). The FCC
it does not exceed the exposure limit established by
the FCC. Tests for each model are performed in
positions and locations (e.g. near the body) as required
by the FCC.
48
FCC Notice and Cautions
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device may cause TV or radio interference if used in close proximity to
receiving equipment. The FCC can require you to stop using the device if such
interference cannot be eliminated. Vehicles using petroleum gas (such as
propane or butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire Protection
Association, One Battery march Park, Quincy, MA 02269, Attn: Publication Sales
Division.
Cautions
Changes or modifications made in the radio device, not expressly approved by
Samsung, will void the user’s authority to operate the equipment.
The use of any unauthorized accessories may be dangerous and void the device
warranty if said accessories cause damage or a defect to the device. Although
your device is quite sturdy, it is a complex piece of equipment and can be broken.
Avoid dropping, hitting, bending or sitting on it.
This device is capable of operating in 802.11a/n mode. For 802.11a/n devices operating in the
frequency range of 5.15 - 5.25 GHz, they are restricted to indoor operations to reduce any
potential harmful interference for Mobile Satellite Services (MSS) in the US.
WIFI Access
Points that are capable of allowing your device to operate in 802.11a/n mode (5.15 - 5.25 GHz
band) are optimized for indoor use only. If your WIFI network is capable of operating in this
mode, please restrict your WIFI use indoors to not violate federal regulations to protect
Mobile Satellite Services.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Create Date                     : 2012:10:09 14:29:30-04:00
Creator                         : Adobe InDesign CS3 (5.0.4)
Modify Date                     : 2012:10:09 14:30:43-04:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2012:10:09 14:30:43-04:00
Creator Tool                    : Adobe InDesign CS3 (5.0.4)
Format                          : application/pdf
Document ID                     : uuid:26305f95-5378-4f10-abe6-9321f7836bfe
Instance ID                     : uuid:8ed5c0d7-6afa-4563-936d-14773e5dbe30
Producer                        : Adobe PDF Library 8.0
Page Count                      : 89
EXIF Metadata provided by EXIF.tools
FCC ID Filing: A3LGTN8020

Navigation menu