Samsung Electronics Co HG32ND477S LED TV User Manual The of A3LHG32ND477S v1 part1
Samsung Electronics Co Ltd LED TV The of A3LHG32ND477S v1 part1
Contents
- 1. The user manual of A3LHG32ND477S v1_part1
- 2. The user manual of A3LHG32ND477S v1_part2
- 3. Users manual Warning card of A3LHG32ND477S
The user manual of A3LHG32ND477S v1_part1
![To register this product please visit www.samsung.com/register.Quick Setup GuideSound Bar ♦Samsung Sound-Bars and Hotel TVs in 20151. Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI 1.4. If you connect a compatible Samsung Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to the TV’s sound through the Sound-Bar.2. The item of Sound bar Out in Hospitality Option Menu makes you control to where the TV sound is outputted when the TV is turned on. – If Sound bar Out is On, the TV sound is automatically outputted in the Sound Bar device only whenever TV is turned on. – If Sound bar Out is Off, the TV sound is automatically outputted in the TV speaker only whenever TV is turned on.3. Models supporting the ARC function are listed below: – Sound-Bars: HW-E350/E450/E550HW-F350/F355/FM35/F450/FM45/FM45C/ F550/F551/FM55/FM55C/F750/F75 ♦Setting the Sound-Bar to Hotel Mode.4. Set the following Hotel menu options: – Hotel option > System > Sound Bar Out = On. – Hotel option > Power On > Power On Volume = User Defined. – Hotel option > Power On > Power On Volume Num > Set greater than 0. – Hotel option > Power On > Max Volume > Set greater than 0.5. Connect an HDMI cable from the HDMI OUT jack at the back of the Sound-Bar to the HDMI3 port (supporting ARC) on the hospitality TV.6. After the Sound-Bar is connected to the hospitality TV, when the TV turns on, the Sound-Bar automatically detects the TV, and then automatically switches to Hotel Mode.Sound Bar Hotel mode functional characteristics: – Power On/Off is synchronized with the TV – HDMI_CEC defaults to On – Functions through the “HDMI OUT” port only – Disables the “Input mode” key on the VFD to prevent unexpected audio-source changes. – Acquires adjustable Power On and Max Volume settings from the TV’s Hotel option menu. The Sound-Bar’s Power On Volume and Max Volume values, however, are ½ of the Power On Volume and Max Volume settings in the TV’s Hotel options menu. – Example: If the TV’s Power On Volume=20 and Max Volume=90, then the Sound Bar’s Power On Volume=10 and Max Volume=45.Wall Mount Kit Specications (VESA)Wall mount Adapter(Depending on the Model)Before installing any other wall mounting kit, assemble the wall mount adapter provided separately with the TV.Install your wall mount on a solid wall perpendicular to the oor. If you are attaching the wall mount to building materials other than plaster board, contact your nearest dealer. If installed on a ceiling or slanted wall, the TV may fall and cause severe personal injury. ➣Standard dimensions for wall mount kits are shown in the table below. ➣Samsung wall mount kits contain a detailed installation manual. All parts necessary for assembly are provided. ➣Do not use screws that do not comply with the VESA standard screw specications. ➣Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specications. Screws that are too long may cause damage to the inside of the TV set. ➣For wall mounts that do not comply with the VESA standard screw specications, the length of the screws may differ depending on the wall mount specications. ➣Do not fasten the screws too rmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. ➣Samsung is not liable for product damage or personal injury when a non-VESA or non-specied wall mount is used or the consumer fails to follow the product installation instructions. ➣Do not mount the TV at more than a 15 degree tilt. ➣Always have two people mount the TV onto a wall.Product Family TV size ininchesVESA screw holespecs (A * B) inmillimetersStandard Screw(Length*Pitch in mm)QuantityLED-TV 32 200 × 200 M8 4Do not install your Wall Mount Kit while your TV is turned on. This may result in personal injury due to electric shock. LicenceManufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS Premium Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.Manufactured under a license from U.S. Patent No’s: 6,285,767, 8,027,477, 5,319,713, 5,333,201, 5,638,452, 5,771,295, 5,970,152, 5,912,976, 7,200,236, 7,492,907, 8,050,434, 7,720,240, 7,031,474, 7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS Studio Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.DivX Certied® to play DivX® video up to HD 1080p, including premium content.ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an ofcial DivX Certied® device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information and software tools to convert your les into DivX videos.ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certied® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies.To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.DivX®, DivX Certied® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274Open Source License NoticeOpen Source used in this product can be found on the following webpage. (http://opensource.samsung.com) Open Source License Notice is written only English.DimensionsHG32ND470S/HG32ND477S123 4 5 6879(unit: mm)1 2 3 4 5 6 7 8 9HG32ND470S HG32ND477S 745.4 699.7 394.3 433.9 442.2 466.6 37.3 69.0 150.5SpecicationsEnvironmental onsiderationsOperating TemperatureOperating HumidityStorage TemperatureStorage Humidity50°F to 104°F (10°C to 40°C)10% to 80%, non-condensing-4°F to 113°F (-20°C to 45°C)5% to 95%, non-condensingModel Name HG32ND470S / HG32ND477SDisplay Resolution 1366 x 768Screen Size(Diagonal)32” Class(31.5” measured diagonally)Sound (Output) 5W x 2Dimensions (WxDxH)BodyWith stand745.4 x 69.0 x 442.2 mm745.4 x 150.5 x 466.6 mmWeightWithout StandWith Stand3.97 kg4.06 kg ➣Design and specications are subject to change without prior notice. ➣This device is a Class B digital apparatus.WARNING: This product contains chemicals known to the State of California to cause cancer and reproductive toxicity.List of Vendors and Compatible Data Cables Supplied with the TV ♦Refer to the code label on the data cable.Note the labeled end.Conrm the code on the Code Label Note the labeled end.Vendor Cable codeSamsung OCCEnseo Guest-Tek BN39-00865BNXTV BN39-01011BnStreams BN39-01110AMTI BN39-01011CHotel Plug & PlayThe Hospital Plug & Play function, which automatically performs the Hospital Mode selection, Country Setup, Clock Setup, and Picture Mode Setup, runs once when power is rst turned ON. Setup also runs automatically after you have executed a Service Reset. ♦Local Set – Initially highlighted: US – If you press the Enter key after selecting Change, youcan change the country. – If the country is changed, the TV automatically turns offand on. – If you select the incorrect country, execute TV Resetagain after entering the Service section of the HospitalMenu. ♦Easy Set up OSD – Initially highlighted: Interactive – If you select the Standalone Only button, Standalonehospital mode is set by default and the “Standalonemode has been set” OSD appears for 3 seconds. – TV enters into RF mode automatically after displayingthe “Standalone mode has been set” OSD for 3 seconds. – If you select Interactive mode, the Interactive SetupMenu is displayed. Press the power off key to exit theInteractive menu. – If you select Standalone setup mode, the “Select yourLanguage” OSD appears. ♦Select your Language OSD – If you select Standalone setup from the “Select HospitalTV Mode” OSD, the “Select Menu Language” OSD appears. – Initially highlighted: English – Display time: OSD time out and operation are the sameas Samsung’s consumer TV models. – If you press the Enter key, the “Configure your TV” OSDappears ♦Congure your TV OSD – Initially highlighted: Standard. – The TV displays the Picture Mode OSD where you canchoose Dynamic or Standard Picture mode. ♦Auto Program OSD – If you press the Enter key, the TV automatically searches for channels. – After the automatically searches for channels complete,press the next button to continue. ♦Set Clock Mode, DST(Daylight saving time), and TimeZone OSD – Initially highlighted: Clock Mode : Auto, DST : Off, TimeZone : Eastern – If the TV will be tuned to digital broadcast channels, andthese channels transmit date and time information, setthe Clock Mode to Auto. The TV will set the date andtime automatically. – If the TV will not be tuned to digital broadcast channels,set the Clock Mode to Manual, and then set the dateand time on the TV manually. – Set DST On or Off to apply or not apply daylight savingtime to the TV. – Select your time zone on the map appears. ♦UI ScenarioList of Parts12345Remote Control (AA59-00817A) & Batteries (AAA x 2)Power Cord Owner’s Instructions Safety Guide Data Cable (BN39-00865B,BN39-01011E) Wall mount Adapter (Depending on the Model)Installing the LED TV Stand ♦HG32ND470S/HG32ND477SComponentsWhen installing the stand, use the provided components and parts.ABX 4 (M4 X L12)Stand Screws142 3(M4 X L12) (2EA) (M4 X L12) (2EA) ✎Make sure that at least two people lift and move the LED TV. ✎When connecting the stand, lay the product down on a soft surface, with the screen facing down, and then fasten the screws. ✎The number of screws may differ depending on the model.Viewing the Connection Panel657323AUDIOOUT EX-LINKAV IN HDMI IN 14ANT INHDMI IN 2(DVI)HDMI IN 3(ARC)DATA1 ➣The product color and shape may vary depending on the model.1 AV IN2 USB (5V 0.5A)/CLONING3 HDMI IN 1, 2(DVI), 3(ARC)4 ANT IN5 DATA6 EX-LINK7 AUDIO OUTWhen in Hotel mode (Interactive or Standalone), all Channel menu items in the Menu OSD except for the Channel List are deactivated. If you need to change the channel line up, use the Channel Setup item in the Hotel options menu.NoticeBN68-07044V-X0STOPPlease do not return this unit If you are having problems operating this TV, Please call;US : 1-866-894-0524 CANADA : 1-800-726-7864For web support please visithttp://www.samsung.com/us/businessAuto ProgramAuto Program is incomplete.0 channels are memorizedChange Settings Scan AgainDTV Air0AirDTV CableCable000If you select ChangeIf you select Standalone OnlyIf you select InteractiveTV will enter the RF mode.Press Power OFF to exit.InteractiveHospitality Option Menu appears.If you don’t change the country of the Current LocationIf you select SkipIf you select Standalone SetupSelect your languagePress Power OFF to exit.Select Picture modeSelect Clock Mode, DST, and your Time ZoneSelect the channel band to use for Auto ProgramAfter Searching channels.If you select TV Reset, the TV resets all values to their factory defaults and then displays the Hospital Plug & Play menu. Go to the first Hospital Plug & Play screen below.The TV is automatically turned off and on.If you change the country of the Current LocationLocal SetChange Locat Set if Located in North America, Latin America and Europe.In other regions, Please press SKIP button move to the next step.Current Localset : USChange SkipLocal SetChange Locat Set if Located in North America, Latin America and Europe.In other regions, Please press SKIP button move to the next step.Current Localset : USChange SkipEasy Set upIntertactive(Hotel Menu)Standalone Setup(Continue Setup)Standalone Only(End Setup)If you select this, thesetup process will becompleted and go tohotel menucSelect your LanguageSelect your language to start the on screen setup. The Language Setting will be applied to Main Menu and not Plug and Play.Press the arrow buttons to move around thescreen.Press the Enter button toselect.EnglishEspañolFrançaisagePressthearrowbuttonscConfigure your TVPicture Mode StandardChoose a picture modethat best suits yourviewing enviroment.Select your information in all of the categories below.TV Setup Complete!Your TV is now ready to useOKAuto ProgramAntenna BothDigital Cable System STDAnalog Cable System STDSelect current connected antenna.To get channels, set the options below then select Scan.ScanAuto ProgramAuto Program is channels for you...Air 21 6%StopDTV Air0AirDTV CableCable000Clock-- : -- --You can adjust your time to set DST, Time Zone andclock mode Set current date and timeClock Mode AutoDate-- / -- / ----Time-- : -- --DST OffTime Zone EasternLocal SetWarning! TV might not function if local set is not correctly configured.When Local set is changed, TV will turn off automatically to apply it.USCountries ListUSAStandalone Hospitality Option Menuappears.Self Diagnosis for TVSelf Diagnosis for HTVSW UpdateService PatternATV cable AGC GainOFFDTV OpenCable AGC GainSound Bar OutOFFContact SamsungStandby LEDONDefaultDefaultTV ResetPwTV ControllerThe TV’s Controller on the bottom right side of the TV, lets you control the TV without the remote control. : Turns the TV on or off. / : Changes channels. / : Adjusts the volume. : Switchs the available video sources.Control MenuRemote control sensor/TV Controller ✎If you press it rst, the control menu appears. You can select the function by pressing and holding the TV’s controller. ✎The product color and shape may vary depending on the model. ✎With the TV’s Controller, you cannot perform other operations except for turning the TV on or off, changing the channel, adjusting the volume, and switching the input source.Standby modeYour TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on vacation, for example). It is best to unplug the power cord.Connecting the TV with an SBB or STBKKETH MODEM1. Connect the [DATA] jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the data cable. ✎The “ETH MODEM” jack name that you connect the Data Cable to may differ depending on the SBB or STB type.[HD470S-ZC-QSG]BN68-07044V-X0L02.indd 1 2015-03-26 2:20:57](https://usermanual.wiki/Samsung-Electronics-Co/HG32ND477S.The-user-manual-of-A3LHG32ND477S-v1-part1/User-Guide-2630980-Page-1.png)