Samsung Electronics Co HG32ND477S LED TV User Manual The of A3LHG32ND477S v1 part1

Download:
Mirror Download [FCC.gov]
Document ID	2630980
Application ID	UEeLqos6rg6iXhJGmJVzng==
Document Description	The user manual of A3LHG32ND477S v1_part1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	190.25kB (2378181 bits)
Date Submitted	2015-06-01 00:00:00
Date Available	2015-06-01 00:00:00
Creation Date	2015-05-29 09:49:43
Producing Software	Adobe PDF Library 9.9
Document Lastmod	2015-05-29 09:49:43
Document Title	The user manual of A3LHG32ND477S v1_part1
Document Creator	Adobe InDesign CS5.5 (7.5.3)

Quick Setup Guide
STOP
To register this product please visit
Please do not return
this unit
www.samsung.com/register.
If you are having problems operating this TV,
Please call;
US : 1-866-894-0524
CANADA : 1-800-726-7864
✎✎ Make sure that at least two people lift and move the LED TV.
✎✎ When connecting the stand, lay the product down on a soft surface, with the screen facing down, and then fasten the screws.
✎✎ The number of screws may differ depending on the model.
List of Vendors and Compatible Data Cables Supplied with the TV
The TV’s Controller on the bottom right side of the TV, lets you control the TV without the remote control.
Viewing the Connection Panel
For web support please visit
http://www.samsung.com/us/business
BN68-07044V-X0
TV Controller
List of Parts
: Turns the TV on or off.
Control Menu
: Changes channels.
: Adjusts the volume.
Remote Control (AA59-00817A)
& Batteries (AAA x 2)
Owner’s Instructions
Safety Guide
Power Cord
Data Cable
(BN39-00865B,BN39-01011E)
AV IN
AUDIO
OUT
Vendor
Samsung OCC
HDMI IN 2
(DVI)
When installing the stand, use the provided components and parts.
HDMI IN 1
Components
HDMI IN 3
(ARC)
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe and to
decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on vacation,
for example). It is best to unplug the power cord.
X 4 (M4 X L12)
Screws
Connecting the TV with an SBB or STB
ANT IN
Stand
Remote control sensor/TV Controller
✎✎ If you press it first, the control menu appears. You can select the function by pressing and holding the TV’s controller.
✎✎ The product color and shape may vary depending on the model.
✎✎ With the TV’s Controller, you cannot perform other operations except for turning the TV on or off, changing the channel,
adjusting the volume, and switching the input source.
Standby mode
(M4 X L12) (2EA)
(M4 X L12) (2EA)
➣➣ The product color and shape may vary depending on the model.
1 AV IN
2 USB (5V 0.5A)/CLONING
3 HDMI IN 1, 2(DVI), 3(ARC)
4 ANT IN
5 DATA
6 EX-LINK
7 AUDIO OUT
ETH MODEM
1. Connect the [DATA] jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the data cable.
✎✎ The “ETH MODEM” jack name that you connect the Data Cable to may differ depending on the SBB or STB type.
Notice When in Hotel mode (Interactive or Standalone), all Channel menu items in the Menu OSD except for the
Channel List are deactivated. If you need to change the channel line up, use the Channel Setup item in the Hotel
options menu.
Sound Bar
♦♦ UI Scenario
Self Diagnosis for TV
Self Diagnosis for HTV
SW Update
OFF
ATV cable AGC Gain
Default
DTV OpenCable AGC Gain
Default
OFF
If you select TV Reset, the TV resets all values to their factory defaults
and then displays the Hospital Plug & Play menu. Go to the first Hospital
Plug & Play screen below.
Contact Samsung
ON
TV Reset
Local Set
Local Set
If you select
Change
Change
LocatSet
Setif ifLocated
Locatedinin North
North America,
Europe.
Change
Locat
America,Latin
LatinAmerica
Americaand
and
Europe.
otherregions,
regions,Please
Pleasepress
press SKIP button
step.
In In
other
buttonmove
movetotothe
thenext
next
step.
Warning! TV might not function if local set is not correctly configured.
When Local set is changed, TV will turn off automatically to apply it.
US
Current Localset
Localset :: US
Current
US
Change
Change
If you change the country of
the Current Location
Countries List
USA
Skip
Skip
If you select Skip
The TV is automatically
turned off and on.
If you don’t change the country of the Current Location
Easy Set up
If you select this, the
setup process will be
completed and go to
hotel menu
Intertactive
(Hotel Menu)
If you select
Standalone Only
Standalone Setup
TV will enter the RF mode.
(Continue Setup)
Standalone Only
(End Setup)
Interactive
If you select Interactive
If you select
Standalone Setup
appears.
Configure your TV
Select your Language
age
Select your language to start the on screen setup.
Select your information in all of the categories
below.
English
Picture Mode
Español
Français
Press Power OFF to exit.
Hospitality Option Menu
Standard
Choose a picture mode
that best suits your
viewing enviroment.
Press the arrow buttons
to move around the
screen.
Press the Enter button to
select.
Auto Program
To get channels, set the options below then select
Scan.
Antenna
Both
Digital Cable System
STD
Analog Cable System
STD
Scan
The Language Setting will be applied to Main Menu and not Plug and Play.
Select your language
Select Picture mode
Auto Program
TV Setup Complete!
Standalone
Auto Program is
Air
Your TV is now ready to use
Hospitality Option Menu
Select the channel
band to use for Auto
Program
♦♦ Samsung Sound-Bars and Hotel TVs in 2015
1. Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI 1.4. If you connect a compatible Samsung
Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to the TV’s sound through
the Sound-Bar.
2. The item of Sound bar Out in Hospitality Option Menu makes you control to where the TV sound is outputted when the TV
is turned on.
–– If Sound bar Out is On, the TV sound is automatically outputted in the Sound Bar device only whenever TV is turned on.
–– If Sound bar Out is Off, the TV sound is automatically outputted in the TV speaker only whenever TV is turned on.
3. Models supporting the ARC function are listed below:
–– Sound-Bars: HW-E350/E450/E550
HW-F350/F355/FM35/F450/FM45/FM45C/ F550/F551/FM55/FM55C/F750/F75
♦♦ Setting the Sound-Bar to Hotel Mode.
4. Set the following Hotel menu options:
–– Hotel option > System > Sound Bar Out = On.
–– Hotel option > Power On > Power On Volume = User Defined.
–– Hotel option > Power On > Power On Volume Num > Set greater than 0.
–– Hotel option > Power On > Max Volume > Set greater than 0.
5. Connect an HDMI cable from the HDMI OUT jack at the back of the Sound-Bar to the HDMI3 port (supporting ARC) on the
hospitality TV.
6. After the Sound-Bar is connected to the hospitality TV, when the TV turns on, the Sound-Bar automatically detects the TV,
and then automatically switches to Hotel Mode.
Sound Bar Hotel mode functional characteristics:
––
––
––
––
––
Power On/Off is synchronized with the TV
HDMI_CEC defaults to On
Functions through the “HDMI OUT” port only
Disables the “Input mode” key on the VFD to prevent unexpected audio-source changes.
Acquires adjustable Power On and Max Volume settings from the TV’s Hotel option menu. The Sound-Bar’s Power On
Volume and Max Volume values, however, are ½ of the Power On Volume and Max Volume settings in the TV’s Hotel
options menu.
–– Example: If the TV’s Power On Volume=20 and Max Volume=90, then the Sound Bar’s Power On Volume=10 and Max
Volume=45.
Wall Mount Kit Specifications (VESA)
➣➣ Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
➣➣ Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
➣➣ Do not mount the TV at more than a 15 degree tilt.
➣➣ Always have two people mount the TV onto a wall.
Product Family
LED-TV
TV size in
inches
32
VESA screw hole
Standard Screw
specs (A * B) in
(Length*
millimeters
Pitch in mm)
200 × 200
M8
Clock
Auto Program
You can adjust your time to set DST, Time Zone and
clock mode
Clock Mode
Date
Time
DST
Time Zone
Set current date and time
Auto
-- : -- -Off
Eastern
-- : -- --
Select Clock Mode, DST, and your Time Zone
[HD470S-ZC-QSG]BN68-07044V-X0L02.indd 1
Auto Program is incomplete.
0 channels are memorized
DTV Air
Air
DTV Cable
Cable
-- / -- / ----
Change Settings
Scan Again
Before installing any other wall mounting kit, assemble the wall mount adapter provided separately with the TV.
Install your wall mount on a solid wall perpendicular to the floor. If you are attaching the wall mount to building materials other
than plaster board, contact your nearest dealer. If installed on a ceiling or slanted wall, the TV may fall and cause severe
personal injury.
➣➣ Standard dimensions for wall mount kits are shown in the table below.
➣➣ Samsung wall mount kits contain a detailed installation manual. All parts necessary for assembly are provided.
➣➣ Do not use screws that do not comply with the VESA standard screw specifications.
➣➣ Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.
➣➣ For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
The Hospital Plug & Play function, which automatically performs the Hospital Mode selection, Country Setup, Clock Setup, and
Picture Mode Setup, runs once when power is first turned ON. Setup also runs automatically after you have executed a Service
Reset.
♦♦ Local Set
–– Initially highlighted: US
–– If you press the Enter key after selecting Change,
youcan change the country.
–– If the country is changed, the TV automatically turns
offand on.
–– If you select the incorrect country, execute TV
Resetagain after entering the Service section of the
HospitalMenu.
♦♦ Easy Set up OSD
–– Initially highlighted: Interactive
–– If you select the Standalone Only button,
Standalonehospital mode is set by default and the
“Standalonemode has been set” OSD appears for 3
seconds.
–– TV enters into RF mode automatically after
displayingthe “Standalone mode has been set” OSD for
3 seconds.
–– If you select Interactive mode, the Interactive
SetupMenu is displayed. Press the power off key to exit
theInteractive menu.
–– If you select Standalone setup mode, the “Select
yourLanguage” OSD appears.
♦♦ Select your Language OSD
–– If you select Standalone setup from the “Select
HospitalTV Mode” OSD, the “Select Menu Language”
OSD appears.
–– Initially highlighted: English
–– Display time: OSD time out and operation are the
sameas Samsung’s consumer TV models.
–– If you press the Enter key, the “Configure your TV”
OSDappears
♦♦ Configure your TV OSD
–– Initially highlighted: Standard.
–– The TV displays the Picture Mode OSD where you
canchoose Dynamic or Standard Picture mode.
♦♦ Auto Program OSD
–– If you press the Enter key, the TV automatically
searches for channels.
–– After the automatically searches for channels
complete,press the next button to continue.
♦♦ Set Clock Mode, DST(Daylight saving time), and
TimeZone OSD
–– Initially highlighted: Clock Mode : Auto, DST : Off,
TimeZone : Eastern
–– If the TV will be tuned to digital broadcast channels,
andthese channels transmit date and time information,
setthe Clock Mode to Auto. The TV will set the date
andtime automatically.
–– If the TV will not be tuned to digital broadcast
channels,set the Clock Mode to Manual, and then set
the dateand time on the TV manually.
–– Set DST On or Off to apply or not apply daylight
savingtime to the TV.
–– Select your time zone on the map appears.
Dimensions
HG32ND470S/HG32ND477S
Do not install your Wall Mount Kit while your TV is turned on. This may result in personal injury due to electric shock.
4 5 6
Licence
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535,
6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and
7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS
Premium Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
Manufactured under a license from U.S. Patent No’s: 6,285,767, 8,027,477, 5,319,713, 5,333,201,
5,638,452, 5,771,295, 5,970,152, 5,912,976, 7,200,236, 7,492,907, 8,050,434, 7,720,240,
7,031,474, 7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the Symbol together are
registered trademarks & DTS Studio Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights
Reserved.
Stop
Wall mount Adapter
(Depending on the Model)
Hotel Plug & Play
6%
After Searching
channels.
BN39-01011C
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
Press Power OFF to exit.
BN39-01110A
MTI
OK
BN39-01011B
nStreams
Quantity
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
channels for you...
21
DTV Air
Air
DTV Cable
Cable
appears.
Select current connected
antenna.
Cable code
BN39-00865B
Enseo Guest-Tek
NXTV
♦♦ HG32ND470S/HG32ND477S
Standby LED
Note the labeled end.
: Switchs the available video sources.
EX-LINK
Wall mount Adapter
(Depending on the Model)
Installing the LED TV Stand
Sound Bar Out
Confirm the code on
the Code Label
Note the
labeled end.
DATA
Service Pattern
♦♦ Refer to the code label on the data cable.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official
DivX Certified® device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information
and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-onDemand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more
information on how to complete your registration.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under
license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com)
Open Source License Notice is written only English.
HG32ND470S
HG32ND477S
(unit: mm)
745.4
699.7
394.3
433.9
442.2
466.6
37.3
69.0
150.5
Specifications
Environmental onsiderations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
Model Name
HG32ND470S / HG32ND477S
Display Resolution
Screen Size
(Diagonal)
1366 x 768
32” Class
(31.5” measured diagonally)
Sound (Output)
Dimensions (WxDxH)
Body
With stand
5W x 2
745.4 x 69.0 x 442.2 mm
745.4 x 150.5 x 466.6 mm
Weight
Without Stand
With Stand
3.97 kg
4.06 kg
➣➣ Design and specifications are subject to change without prior notice.
➣➣ This device is a Class B digital apparatus.
WARNING:
This product contains chemicals known to the State of California to cause cancer and reproductive toxicity.
2015-03-26
2:20:57

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Modify Date                     : 2015:05:29 09:49:43+08:00
Create Date                     : 2015:05:29 09:49:43+08:00
Metadata Date                   : 2015:05:29 09:49:43+08:00
Creator Tool                    : Adobe InDesign CS5.5 (7.5.3)
Format                          : application/pdf
Document ID                     : uuid:a1567b37-b52e-48a8-9c1a-c51d47512ae3
Instance ID                     : uuid:de314197-4ffb-40a4-9549-4d8445b5570b
Producer                        : Adobe PDF Library 9.9
Page Count                      : 1
Creator                         : Adobe InDesign CS5.5 (7.5.3)

EXIF Metadata provided by EXIF.tools