Samsung Electronics Co HG40ND477 LED TV User Manual of A3LHG40ND477

Samsung Electronics Co Ltd LED TV of A3LHG40ND477

Contents

User manual of A3LHG40ND477

To register this product please visit www.samsung.com/register.Quick Setup GuideList of Parts123Remote Control (AA59-00817A) & Batteries (AAA x 2)Power Cord Owner’s Instructions Safety Guide456Holder-Wire stand 1(EA) (not for 24” models) Data Cable (BN39-00865B,BN39-01011E) Hotel Mount Kit (not for 24” models)2.  The item of Sound bar Out in Hospitality Option Menu makes you control to where the TV sound is outputted when the TV is turned on. – If Sound bar Out is On, the TV sound is automatically outputted in the Sound Bar device only whenever TV is turned on. – If Sound bar Out is Off, the TV sound is automatically outputted in the TV speaker only whenever TV is turned on.3.  Models supporting the ARC function are listed below: – Sound-Bars: HW-E350/E450/E550HW-F350/F355/FM35/F450/FM45/FM45C/ F550/F551/FM55/FM55C/F750/F75 ♦Setting the Sound-Bar to Hotel Mode.4.  Set the following Hotel menu options: – Hotel option > System > Sound Bar Out = On. – Hotel option > Power On > Power On Volume = User Defined. – Hotel option > Power On > Power On Volume Num > Set greater than 0. – Hotel option > Power On > Max Volume > Set greater than 0.5.  Connect an HDMI cable from the HDMI OUT jack at the back of the Sound-Bar to the HDMI3 port (supporting ARC) on the hospitality TV.6.  After the Sound-Bar is connected to the hospitality TV, when the TV turns on, the Sound-Bar automatically detects the TV, and then automatically switches to Hotel Mode.Sound Bar Hotel mode functional characteristics: – Power On/Off is synchronized with the TV – HDMI_CEC defaults to On – Functions through the “HDMI OUT” port only – Disables the “Input mode” key on the VFD to prevent unexpected audio-source changes. – Acquires adjustable Power On and Max Volume settings from the TV’s Hotel option menu. The Sound-Bar’s Power On Volume and Max Volume values, however, are ½ of the Power On Volume and Max Volume settings in the TV’s Hotel options menu. – Example: If the TV’s Power On Volume=20 and Max Volume=90, then the Sound Bar’s Power On Volume=10 and Max Volume=45.Wall Mount Kit Specications (VESA)Install your wall mount on a solid wall perpendicular to the oor. If you are attaching the wall mount to building materials other than plaster board, contact your nearest dealer. If installed on a ceiling or slanted wall, the TV may fall and cause severe personal injury. ➣Standard dimensions for wall mount kits are shown in the table below. ➣Samsung wall mount kits contain a detailed installation manual. All parts necessary for assembly are provided. ➣Do not use screws that do not comply with the VESA standard screw specications. ➣Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specications. Screws that are too long may cause damage to the inside of the TV set. ➣For wall mounts that do not comply with the VESA standard screw specications, the length of the screws may differ depending on the wall mount specications. ➣Do not fasten the screws too rmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. ➣Samsung is not liable for product damage or personal injury when a non-VESA or non-specied wall mount is used or the consumer fails to follow the product installation instructions. ➣Do not mount the TV at more than a 15 degree tilt. ➣Always have two people mount the TV onto a wall.Product Family TV size ininchesVESA screw holespecs (A * B) inmillimetersStandard Screw(Length*Pitch in mm)QuantityLED-TV24 75 × 75 M4432 200 × 200 M840Do not install your Wall Mount Kit while your TV is turned on. This may result in personal injury due to electric shock. LicenceManufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS Premium Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.Manufactured under a license from U.S. Patent No’s: 6,285,767, 8,027,477, 5,319,713, 5,333,201, 5,638,452, 5,771,295, 5,970,152, 5,912,976, 7,200,236, 7,492,907, 8,050,434, 7,720,240, 7,031,474, 7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS Studio Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.The terms HDMI and HDMI High-De nition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.DivX Certied® to play DivX® video up to HD 1080p, including premium content.ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an ofcial DivX Certied® device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information and software tools to convert your les into DivX videos.ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certied® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies.To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.DivX®, DivX Certied® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274Open Source License NoticeOpen Source used in this product can be found on the following webpage. (http://opensource.samsung.com)Open Source License Notice is written only English.DimensionsHG24ND47012435 6798(unit: mm)1 2 3 4 5 6 7 8 9HG24ND470 561.8 523.3 600.0 295.2 349.1 384.2 47.9 65.2 163.8HG32ND470 / HG32ND477 HG40ND470 / HG40ND4771243 5761243 576(unit: mm)1234567HG32ND470 HG32ND477 738.4  703.4 397.8 441.7 498.1 191.7 93.1HG40ND470 HG40ND477 905.2  879.5  486.3  525.4  562.7  226.5  91.1 SpecicationsEnvironmental onsiderationsOperating TemperatureOperating HumidityStorage TemperatureStorage Humidity50°F to 104°F (10°C to 40°C)10% to 80%, non-condensing-4°F to 113°F (-20°C to 45°C)5% to 95%, non-condensingModel Name HG24ND470 HG32ND470 / HG32ND477Display Resolution 1366 x 768Screen Size(Diagonal)24” Class(24.0” measured diagonally)32” Class(32.0” measured diagonally)Sound (Output) 5W x 2Dimensions (WxDxH)BodyWith stand561.8 x 65.2 x 349.1 mm561.8 x 163.8 x 384.2 mm738.4 x 93.1 x 441.7 mm738.4 x 191.7 x 498.1 mmWeightWithout StandWith Stand3.9kg4.1kg5.4kg5.9kgStand Swivel (Left / Right) 0°Model Name HG40ND470 / HG40ND477Display Resolution 1920 x 1080Screen Size(Diagonal)40” Class(40.0” measured diagonally)Sound (Output) 10W × 2Dimensions (WxDxH)BodyWith stand905.2 x 91.1 x 525.4 mm905.2 x 226.5 x 562.7 mmWeightWithout StandWith Stand6.4kg9.4kgStand Swivel (Left / Right) 20° / 60° / 90° ➣Design and specications are subject to change without prior notice. ➣This device is a Class B digital apparatus.WARNING: This product contains chemicals known to the State of California to cause cancer and reproductive toxicity.Connecting the TV with an SBB or STBKKETH MODEM1.   Connect the [DATA] jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the data cable. ✎The “ETH MODEM” jack name that you connect the Data Cable to may differ depending on the SBB or STB type.List of Vendors and Compatible Data Cables Supplied with the TV ♦Refer to the code label on the data cable.Note the labeled end.Confirm the code on the Code LabelNote the labeled end.Vendor Cable codeSamsung OCCEnseo Guest-Tek BN39-00865BNXTV BN39-01011BnStreams BN39-01110AMTI BN39-01011CHotel Plug & PlayThe Hospital Plug & Play function, which automatically performs the Hospital Mode selection, Country Setup, Clock Setup, and Picture Mode Setup, runs once when power is rst turned ON. Setup also runs automatically after you have executed a Service Reset. ♦Hospital Plug & Play OSD – Initially highlighted: Interactive – If you select the Standalone Only button, Standalone hospital mode is set by default and the “Standalone mode is set” OSD appears for 3 seconds. – TV enters into RF mode automatically after displaying the “Standalone mode is set” OSD for 3 seconds. – If you select Interactive mode, the Interactive Setup Menu is displayed. Press the power off key to exit the Interactive menu. – If you select Standalone setup mode, the “Select Menu Language” OSD appears. ♦Local Set – Initially highlighted: US – If you press the Enter key after selecting Change, you can change the country. – If the country is changed, the TV automatically turns off and on. – If you select the incorrect country, execute TV Reset again after entering the Service section of the Hospital Menu. ♦Select Menu Language OSD – If you select Standalone setup from the “Select Hospital TV Mode” OSD, the “Select Menu Language” OSD appears. – Initially highlighted: English – Display time: OSD time out and operation are the same as Samsung’s consumer TV models. – If you press the Enter key, the “Picture Mode” OSD appears ♦Picture Mode OSD – Initially highlighted: Standard. – The TV displays the Picture Mode OSD where you can choose Dynamic or Standard Picture mode. ♦Auto Search Mode OSD – If you press the Enter key, the TV automatically searches for channels. – The OSD Display time, which starts when the Auto Store operation is completed and continues until the Auto Sort function starts, is 30 seconds. ♦Set Clock Mode, DST(Daylight saving time), and Time Zone OSD – Initially highlighted: Clock Mode : Auto, DST : Off, Time Zone : Eastern  – If the TV will be tuned to digital broadcast channels, and these channels transmit date and time information, set the Clock Mode to Auto. The TV will set the date and time automatically. – If the TV will not be tuned to digital broadcast channels, set the Clock Mode to Manual, and then set the date and time on the TV manually.  – Set DST On or Off to apply or not apply daylight saving time to the TV. – Select your time zone on the map appears.Viewing the Connection Panel3HDMI IN 12(5V  0.5A)/CLONING1AV INAUDIOVIDEO4EX-LINKAUDIO OUT576ANT INAIR/CABLEDATAHDMI IN 3 (ARC)HDMI IN 2(DVI)13HDMI IN 12(5V  0.5A)/CLONING1AV INAUDIOVIDEO4EX-LINKAUDIOOUT576ANT INAIR/CABLEDATAHDMI IN 3 (ARC)HDMI IN 2(DVI)14EX-LINKAUDIOOUT576ANT INAIR/CABLEDATAHDMI IN 3 (ARC)HDMI IN 2(DVI)132HDMI IN 11AV INAUDIOVIDEO ➣The product color and shape may vary depending on the model.1  HDMI IN 1, 2(DVI), 3(ARC)2  USB (5V 0.5A) / CLONING3  VIDEO / L-AUDIO-R4 EX-LINK5  AUDIO OUT6  ANT IN (AIR/CABLE)7  DATAWhen in Hotel mode (Interactive or Standalone), all Channel menu items in the Menu OSD except for the Channel List are deactivated. If you need to change the channel line up, use the Channel Setup item in the Hotel options menu.NoticeTV ControllerThe TV’s Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV without the remote control.TV ControllerThe image is drawn as if you are facing the front side of the TV.Power offFunction menuRemote control sensorReturnSelecting the Media PlaySelecting the Menu Select a source. ✎The product color and shape may vary depending on the model. ✎To exit the menu, press the Controller for more than 1 second. ✎When selecting a function by moving the controller up/down/left/right, be sure not to press up on the controller. If you press up rst, it will not operate correctly.Standby modeYour TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on vacation, for example). It is best to unplug the power cord. ♦UI ScenarioInstalling the LED TV Stand ♦HG24ND470 / HG32ND470 / HG40ND470 / HG32ND477 / HG40ND477ComponentsWhen installing the stand, use the provided components and parts.(for 24” models)Ax3 (M4 x L12, for 24” models)B• Stand • Screws12 3 ✎Place a soft cloth over the table to protect the TV, and then place the TV on the cloth screen-side down. ✎Insert the Stand Guide into the slot on the bottom of the TV.x3 (M4 x L12) ✎Make sure to distinguish between the front and back of the Stand and Stand Guide when connecting them. ✎Make sure that at least two people lift and move the LED TV.  ✎When connecting the stand, lay the product down on a soft surface, with the screen facing down, and then fasten the screws.  ✎The number of screws may differ depending on the model.(for 32” and above models)ABx8 (M4 x L12)CDx 4 (M4 x L12)• Stand • Guide Stand  • Screws • Security ScrewsBAFront12 3C(M4 X L12)  x4TOP ViewSideCDx 4 (M4x12)orx 4 (M4x12)AttentionDO NOT USECHEMICALSDO NOT USEGREASEDO NOT USEOIL ✎Place a soft cloth over the table to protect the TV, and then place the TV on the cloth screen-side down. ✎Insert the Stand Guide into the slot on the bottom of the TV. ♦Assembling the swivelThe 32” and larger LED TVs have swivel stands. You can set these stands so that the TV swivels 20 degrees left and right, 60 degrees left and right, or 90 degrees left and right.20° swivelTo congure the TV so that it swivels 20° left and right, insert the prong on the bottom of the stand through the curved hole in the Bracket Holder Swivel marked 20°. Then, x the Bracket Holder Swivel to the stand using the three supplied screws as shown to the left.60° swivelTo congure the TV so that it swivels 60° left and right, insert the prong on the bottom of the stand through the curved hole in the Bracket Holder Swivel marked 60°. Then, x the Bracket Holder Swivel to the stand using the three supplied screws as shown to the left.  90° swivelTo congure the TV so that it swivels 90° left and right, remove the Bracket Holder Swivel, and then screw the three supplied screws into the stand as shown to the left. ♦Hotel Mount Kit (only for swivel stands)Bolt + NutWARNING: To prevent injury, you must attach this TV securely to the oor, a table, a dresser top, etc. with the Hotel Mount Kit as described in these instructions.Short Bolt (2EA) Long Bolt (2EA)Nut (2EA) Washer (2EA)TopBottomAfx the stand to a at surface such as a dresser top, desk top, or entertainment center as shown. BN68-07039C-X0STOPPlease do not return this unit If you are having problems operating this TV, Please call;US : 1-866-894-0524 CANADA : 1-800-726-7864For web support please visithttp://www.samsung.com/us/businessSound Bar ♦Samsung Sound-Bars and Hotel TVs in 20151.  Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI 1.4. If you connect a compatible Samsung Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to the TV’s sound through the Sound-Bar.HD470 24" MODEL USE HD470/477 32” MODEL USE HD470/477 40”MODEL USEAuto ProgramAuto Program is incomplete.0 channels are memorizedChange Settings Scan AgainDTV Air0AirDTV CableCable000If you select ChangeIf you select Standalone OnlyIf you select InteractiveTV will enter the RF mode.Press Power OFF to exit.InteractiveHospitality Option Menu appears.If you don’t change the country of the Current LocationIf you select SkipIf you select Standalone SetupSelect your languagePress Power OFF to exit.Select Picture modeSelect Clock Mode, DST, and your Time ZoneSelect the channel band to use for Auto ProgramAfter Searching channels.If you select TV Reset, the TV resets all values to their factory defaults and then displays the Hospital Plug & Play menu. Go to the first Hospital Plug & Play screen below.The TV is automatically turned off and on.If you change the country of the Current LocationLocal SetChange Locat Set if Located in North America, Latin America and Europe.In other regions, Please press SKIP button move to the next step.Current Localset : USChange SkipLocal SetChange Locat Set if Located in North America, Latin America and Europe.In other regions, Please press SKIP button move to the next step.Current Localset : USChange SkipEasy Set upIntertactive(Hotel Menu)Standalone Setup(Continue Setup)Standalone Only(End Setup)If you select this, thesetup process will becompleted and go tohotel menucSelect your LanguageSelect your language to start the on screen setup. The Language Setting will be applied to Main Menu and not Plug and Play.Press the arrow buttons to move around thescreen.Press the Enter button toselect.EnglishEspañolFrançaisagePressthearrowbuttonscConfigure your TVPicture Mode             StandardChoose a picture modethat best suits yourviewing enviroment.Select your information in all of the categories below.TV Setup Complete!Your TV is now ready to useOKAuto ProgramAntenna              BothDigital Cable System            STDAnalog Cable System            STDSelect current connected antenna.To get channels, set the options below then select Scan.ScanAuto ProgramAuto Program is   channels for you...Air 21     6%StopDTV Air0AirDTV CableCable000Clock-- : -- --You can adjust your time to set DST, Time Zone andclock mode Set current date and timeClock Mode AutoDate-- / -- / ----Time-- : -- --DST OffTime Zone EasternLocal SetWarning! TV might not function if local set is not correctly configured.When Local set is changed, TV will turn off automatically to apply it.USCountries ListUSAStandalone Hospitality Option Menuappears.Self Diagnosis for TVSelf Diagnosis for HTVSW UpdateService PatternATV cable AGC GainOFFDTV OpenCable AGC GainSound Bar OutOFFContact SamsungStandby LEDONDefaultDefaultTV ResetPw[HD470_477-ZA-QSG]BN68-07039C-X0L02.indd   1 2015-01-26   �� 11:13:52

Navigation menu