Samsung Electronics Co HG50ND470S LED TV User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2725766
Application ID	Eo/JAr5UTxW69SFF82fWgw==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	352.27kB (4403352 bits)
Date Submitted	2015-08-26 00:00:00
Date Available	2015-08-27 00:00:00
Creation Date	2015-08-24 11:34:14
Producing Software	Adobe PDF Library 9.9
Document Lastmod	2015-08-24 11:34:50
Document Title	user manual
Document Creator	Adobe InDesign CS5.5_J (7.5.3)

Quick Setup Guide
STOP
To register this product please visit
Please do not return
this unit
www.samsung.com/register.
♦♦ Assembling the swivel
The 40” and larger LED TVs have swivel stands. You can set these stands so that the TV swivels 20 degrees left and right, 60
degrees left and right, or 90 degrees left and right.
US : 1-866-894-0524
CANADA : 1-800-726-7864
For web support please visit
http://www.samsung.com/us/business
VIDEO / L-AUDIO-R
HDMI IN 2
(DVI)
AUDIO OUT
HDMI IN 1
ANT IN (AIR/CABLE)
DATA
(5V 0.5A)
/CLONING
AV IN
VIDEIO
HDMI IN 1, 2(DVI), 3(ARC)
Owner’s Instructions
Safety Guide
Power Cord
90° swivel
To configure the TV so that it swivels 90° left and right, remove the Bracket Holder Swivel, and
then screw the three supplied screws into the stand as shown to the left.
Holder-Wire stand (1EA)
♦♦ Hotel Mount Kit
Wall Mount Adapter
(Depending on the model)
Hotel Mount Kit
Bolt + Nut
Short Bolt (2EA)
Installing the LED TV Stand
Affix the stand to a
flat surface such as a
dresser top, desk top, or
entertainment center as
shown.
Bottom
Long Bolt (2EA)
♦♦ HG40ND470S / HG40ND477S / HG43ND470S / HG43ND477S / HG50ND470S / HG50ND477S
WARNING: To prevent injury, you must attach this
TV securely to the floor, a table, a dresser top,
etc. with the Hotel Mount Kit as described in these
instructions.
Components
When installing the stand, use the provided components and parts.
Nut (2EA)
1EA
1EA
• Stand
• Guide Stand
• Screws
x4
(M4 X L12)
x8(M4 X L12)
x4(M4 X L12)
• Security Screws
Washer (2EA)
TV Controller
The TV’s Controller on the bottom right side of the TV, lets you control the TV without the remote control.
: Turns the TV on or off.
Control Menu
: Changes channels.
: Adjusts the volume.
: Switchs the available video sources.
Front
TOP View
Side
Attention
DO NOT USE DO NOT USE DO NOT USE
CHEMICALS
GREASE
OIL
✎✎ Place a soft cloth over the table to
protect the TV, and then place the
TV on the cloth screen-side down.
(M4 X L12)
✎✎ Insert the Stand Guide into the
slot on the botton of the TV.
(Security Screw)
x4
Remote control sensor/TV Controller
x4
✎✎ Make sure to distinguish between the front and back of the Stand and Stand Guide when connecting them.
✎✎ Make sure that at least two people lift and move the LED TV.
✎✎ When connecting the stand, lay the product down on a soft surface, with the screen facing down, and then fasten the screws.
✎✎ The number of screws may differ depending on the model.
BN68-07586E-X2
Standby mode
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe and to
decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on vacation,
for example). It is best to unplug the power cord.
the Data Cable to may differ depending on the
SBB or STB type.
List of Vendors and Compatible Data Cables Supplied with the TV
♦♦ Refer to the code label on the data cable.
AIR/CABLE
AUDIO OUT
Note the
labeled end.
Confirm the code
on the Code Label
Note the labeled
end.
Vendor
Cable code
Samsung OCC
Enseo Guest-Tek
BN39-00865B
NXTV
BN39-01011B
Notice When in Hotel mode (Interactive or Standalone), all Channel menu items in the Menu OSD except for the
Channel List are deactivated. If you need to change the channel line up, use the Channel Setup item in the Hotel
options menu.
Sound Bar
♦♦ Samsung Sound-Bars and Hotel TVs in 2015
1. Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI 1.4. If you connect a compatible Samsung
Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to the TV’s sound through
the Sound-Bar.
2. The item of Sound bar Out in Hospitality Option Menu makes you control to where the TV sound is outputted when the TV
is turned on.
–– If Sound bar Out is On, the TV sound is automatically outputted in the Sound Bar device only whenever TV is turned on.
–– If Sound bar Out is Off, the TV sound is automatically outputted in the TV speaker only whenever TV is turned on.
3. Models supporting the ARC function are listed below:
–– Sound-Bars: HW-E350/E450/E550
HW-F350/F355/FM35/F450/FM45/FM45C/ F550/F551/FM55/FM55C/F750/F75
♦♦ Setting the Sound-Bar to Hotel Mode.
4. Set the following Hotel menu options:
–– Hotel option > System > Sound Bar Out = On.
–– Hotel option > Power On > Power On Volume = User Defined.
–– Hotel option > Power On > Power On Volume Num > Set greater than 0.
–– Hotel option > Power On > Max Volume > Set greater than 0.
5. Connect an HDMI cable from the HDMI OUT jack at the back of the Sound-Bar to the HDMI3 port (supporting ARC) on the
hospitality TV.
6. After the Sound-Bar is connected to the hospitality TV, when the TV turns on, the Sound-Bar automatically detects the TV,
and then automatically switches to Hotel Mode.
Sound Bar Hotel mode functional characteristics:
✎✎ If you press it first, the control menu appears. You can select the function by pressing and holding the TV’s controller.
✎✎ The product color and shape may vary depending on the model.
✎✎ With the TV’s Controller, you cannot perform other operations except for turning the TV on or off, changing the channel,
adjusting the volume, and switching the input source.
Wall Mount Kit Specifications (VESA)
♦♦ UI Scenario
ANT IN
ETH MODEM
EX-LINK
➣➣ The product color and shape may vary depending on the model.
Top
Data Cable
(BN39-00865B, BN39-01011E)
EX-LINK
1. Connect the [DATA] jack of the TV to the [ETH
MODEM] jack of the STB (SBB) with the data cable.
✎✎ The “ETH MODEM” jack name that you connect
USB (5V 0.5A) / CLONING
AUDIO
Remote Control (AA59-00817A) &
Batteries (AAA x 2)
HDMI IN
3 (ARC)
60° swivel
To configure the TV so that it swivels 60° left and right, insert the prong on the bottom of the stand
through the curved hole in the Bracket Holder Swivel marked 60°. Then, fix the Bracket Holder
Swivel to the stand using the three supplied screws as shown to the left.
Connecting the TV with an SBB or STB
20° swivel
To configure the TV so that it swivels 20° left and right, insert the prong on the bottom of the stand
through the curved hole in the Bracket Holder Swivel marked 20°. Then, fix the Bracket Holder
Swivel to the stand using the three supplied screws as shown to the left.
If you are having problems operating this TV,
Please call;
List of Parts
Viewing the Connection Panel
––
––
––
––
––
Power On/Off is synchronized with the TV
HDMI_CEC defaults to On
Functions through the “HDMI OUT” port only
Disables the “Input mode” key on the VFD to prevent unexpected audio-source changes.
Acquires adjustable Power On and Max Volume settings from the TV’s Hotel option menu. The Sound-Bar’s Power On
Volume and Max Volume values, however, are ½ of the Power On Volume and Max Volume settings in the TV’s Hotel
options menu.
Example: If the TV’s Power On Volume=20 and Max Volume=90, then the Sound Bar’s Power On Volume=10 and Max
Volume=45.
License
NStreams
BN39-01110A
MTI
BN39-01011C
Hotel Plug & Play
The Hospital Plug & Play function, which automatically performs the Hospital Mode selection, Country Setup, Clock Setup, and
Picture Mode Setup, runs once when power is first turned ON. Setup also runs automatically after you have executed a Service
Reset.
♦♦ Local Set
–– Initially highlighted: US
–– If you press the Enter key after selecting Change, you
can change the country.
–– If the country is changed, the TV automatically turns off
and on.
–– If you select the incorrect country, execute TV Reset
again after entering the Service section of the Hospital
Menu.
♦♦ Easy Set up OSD
–– Initially highlighted: Interactive
–– If you select the Standalone Only button, Standalone
hospital mode is set by default and the “Standalone
mode has been set” OSD appears for 3 seconds.
–– TV enters into RF mode automatically after displaying
the “Standalone mode has been set” OSD for 3
seconds.
–– If you select Interactive mode, the Interactive Setup
Menu is displayed. Press the power off key to exit the
Interactive menu.
–– If you select Standalone setup mode, the “Select your
Language” OSD appears.
♦♦ Select Menu Language OSD
–– If you select Standalone setup from the “Select Hospital
TV Mode” OSD, the “Select Menu Language” OSD
appears.
–– Initially highlighted: English
–– Display time: OSD time out and operation are the same
as Samsung’s consumer TV models.
–– If you press the Enter key, the “Picture Mode” OSD
appears.
♦♦ Configure your TV OSD
–– Initially highlighted: Standard.
–– The TV displays the Picture Mode OSD where you can
choose Dynamic or Standard Picture mode.
♦♦ Auto Program OSD
–– If you press the Enter key, the TV automatically
searches for channels.
–– After the automatically searches for channels complete,
press the next button to continue.
♦♦ Set Clock Mode, DST(Daylight saving time), and
TimeZone OSD
–– Initially highlighted: Clock Mode : Auto, DST : Off,
TimeZone : Eastern
–– If the TV will be tuned to digital broadcast channels, and
these channels transmit date and time information, set
the Clock Mode to Auto. The TV will set the date and
time automatically.
–– If the TV will not be tuned to digital broadcast channels,
set the Clock Mode to Manual, and then set the date
and time on the TV manually.
–– Set DST On or Off to apply or not apply daylight saving
time to the TV.
–– Select your time zone on the map appears.
Dimensions
Self Diagnosis for TV
Self Diagnosis for HTV
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
SW Update
Service Pattern
40 Inch
OFF
ATV cable AGC Gain
Default
DTV OpenCable AGC Gain
Default
Sound Bar Out
If you select TV Reset, the TV resets all values to their factory defaults
and then displays the Hospital Plug & Play menu. Go to the first Hospital
Plug & Play screen below.
OFF
Contact Samsung
Standby LED
TV
Wall mount
Adapter
Wall mount
Bracket
ON
If you select
Change
Warning! TV might not function if local set is not correctly configured.
When Local set is changed, TV will turn off automatically to apply it.
US
Current Localset
Localset :: US
Current
US
Change
Change
If you change the country of
the Current Location
Countries List
USA
Skip
Skip
If you select Skip
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
43 ~ 50 Inch
Easy Set up
Wall mount
Bracket
If you select this, the
setup process will be
completed and go to
hotel menu
Interactive
(Hotel Menu)
If you select
Standalone Only
Standalone Setup
TV
TV will enter the RF mode.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
(Continue Setup)
Standalone Only
(End Setup)
Interactive
If you select Interactive
If you select
Standalone Setup
appears.
Select your language to start the on screen setup.
Select your information in all of the categories
below.
English
Picture Mode
Español
Français
Configure your TV
Select your Language
age
Press Power OFF to exit.
Hospitality Option Menu
Standard
Choose a picture mode
that best suits your
viewing enviroment.
Press the arrow buttons
to move around the
screen.
Press the Enter button to
select.
Auto Program
To get channels, set the options below then select
Scan.
Antenna
Both
Digital Cable System
STD
Analog Cable System
STD
Select your language
Select Picture mode
Auto Program is
Air
Your TV is now ready to use
Hospitality Option Menu
Select the channel
band to use for Auto
Program
➣➣ Samsung wall mount kits contain a detailed installation manual. All parts necessary for assembly are provided.
➣➣ Do not use screws that do not comply with the VESA standard screw specifications.
Auto Program
TV Setup Complete!
Standalone
channels for you...
21
6%
DTV Air
Air
DTV Cable
Cable
appears.
Stop
OK
After Searching
channels.
Press Power OFF to exit.
Clock
Auto Program
You can adjust your time to set DST, Time Zone and
clock mode
Clock Mode
Date
Time
DST
Time Zone
Set current date and time
Auto
-- / -- / ----- : -- -Off
Eastern
Auto Program is incomplete.
0 channels are memorized
DTV Air
Air
DTV Cable
Cable
-- : -- --
Select Clock Mode, DST, and your Time Zone
Install your wall mount on a solid wall perpendicular to the floor. If you are attaching the wall mount to building materials other
than plaster board, contact your nearest dealer. If installed on a ceiling or slanted wall, the TV may fall and cause severe
personal injury.
➣➣ Standard dimensions for wall mount kits are shown in the table below.
Scan
The Language Setting will be applied to Main Menu and not Plug and Play.
Select current connected
antenna.
Change Settings
(unit: mm)
The TV is automatically
turned off and on.
If you don’t change the country of the Current Location
Manufactured under a license from U.S. Patent No’s: 6,285,767, 8,027,477, 5,319,713, 5,333,201,
5,638,452, 5,771,295, 5,970,152, 5,912,976, 7,200,236, 7,492,907, 8,050,434, 7,720,240,
7,031,474, 7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the Symbol together are
registered trademarks & DTS Studio Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights
Reserved.
Local Set
Local Set
Change
LocatSet
Setif ifLocated
Locatedinin North
North America,
Europe.
Change
Locat
America,Latin
LatinAmerica
Americaand
and
Europe.
otherregions,
regions,Please
Pleasepress
press SKIP button
step.
In In
other
buttonmove
movetotothe
thenext
next
step.
Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535,
6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and
7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS
Premium Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
TV Reset
HG40ND470S / HG40ND477S / HG43ND470S / HG43ND477S / HG50ND470S / HG50ND477S
➣➣ Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official
DivX Certified® device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information
and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-onDemand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more
information on how to complete your registration.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under
license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com)
Open Source License Notice is written only English.
HG40ND470S
HG40ND477S
922.7
880.1
487.4
530.7
582.3
40.5
72.0
226.5
HG43ND470S
HG43ND477S
985.5
942.9
531.3
575.3
624.2
40.5
72.2
226.5
HG50ND470S
HG50ND477S
1140.8
1097.8
618.4
662.3
713.9
41.6
72.9
226.5
Specifications
Environmental onsiderations
Operating Temperature
50°F to 104°F (10°C to 40°C)
Operating Humidity
10% to 80%, non-condensing
Storage Temperature
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
Storage Humidity
Model Name
HG40ND470S / HG40ND477S
HG43ND470S / HG43ND477S
Display Resolution
Screen Size
(Diagonal)
HG50ND470S / HG50ND477S
1920 x 1080
40” Class
43” Class
50” Class
(39.5” measured diagonally)
(42.5” measured diagonally)
(49.5” measured diagonally)
➣➣ For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
Sound (Output)
➣➣ Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
Body
922.7 x 72.0 x 530.7 mm
985.5 x 72.2 x 575.3 mm
1140.8 x 72.9 x 662.3 mm
With stand
922.7 x 226.5 x 582.3 mm
985.5 x 226.5 x 624.2 mm
1140.8 x 226.5 x 713.9 mm
➣➣ Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
Weight
Without Stand
6.53 kg
7.71 kg
10.50 kg
➣➣ Do not mount the TV at more than a 15 degree tilt.
With Stand
9.47 kg
10.65 kg
13.44 kg
Stand Swivel (Left / Right)
➣➣ Always have two people mount the TV onto a wall.
Product Family
Scan Again
LED-TV
TV size in
inches
40
43 - 50
VESA screw hole
specs (A * B) in
C (mm)
Standard Screw
Quantity
32.5 ~ 33.5
21.5 ~ 22.5
M8
20° / 60° / 90°
➣➣ Design and specifications are subject to change without prior notice.
➣➣ This device is a Class B digital apparatus.
WARNING:
millimeters
200 × 200
10W x 2
Dimensions (WxDxH)
This product contains chemicals known to the State of California to cause cancer and reproductive toxicity.
Do not install your Wall Mount Kit while your TV is turned on. This may result in personal injury due to electric shock.
[HD470S_477S-ZC-QSG]BN68-07586E-X2L02.indd
2015-07-13
�� 10:55:33

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2015:08:24 11:34:14+08:00
Creator                         : Adobe InDesign CS5.5_J (7.5.3)
Modify Date                     : 2015:08:24 11:34:50+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2015:08:24 11:34:50+08:00
Creator Tool                    : Adobe InDesign CS5.5_J (7.5.3)
Format                          : application/pdf
Document ID                     : uuid:b980449e-a67b-4625-8e9e-dcb7b6db98db
Instance ID                     : uuid:273170b7-8d7c-4537-8a02-8993d6f6c68c
Producer                        : Adobe PDF Library 9.9
Page Count                      : 1

EXIF Metadata provided by EXIF.tools