Samsung Electronics Co HTX810 DVD Receiver (BT) User Manual

Samsung Electronics Co Ltd DVD Receiver (BT) HT X810 1

a href="https://usermanual.wiki/Samsung-Electronics-Co" itemprop="url"> Samsung Electronics Co >

Contents

User manual 1 of 3

Press the POWER button on the rear of the subwoofer to turn it on.If the main unit is turned onThe subwoofer will be automatically connected to the product and the Link LED on its front will blink blue for a few seconds.If the main unit is turned offThe Link LED on the front of the subwoofer will blink blue for about 30 seconds, then will change to red as the sub switches to STANDBY mode.If the subwoofer is turned off, you will see S/W CHECK on the display panel of the main unit.Place the wireless subwoofer under the main unit.If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or any other device that uses the same frequency (2.4GHz) near the system, some sound interruption may be heard due to interference.The transmission distance of radio wave is about 32 feet, 9.7 inches, but may vary depending on your operating environment. If a steel-concrete wall or metallic wall is between the main unit and the wireless subwoofer, the system may not operate at all, because the radio wave cannot penetrate metal.If the main unit doesn't make wireless connection, the system needs ID Setting between the main unit and wireless subwoofer. With the main unit turned off, press the remote control's "0"J"1"J"3"J"5" number buttons and the unit will turn on. With the wireless subwoofer turned on, press ID SET button on the back of the unit for 5 seconds.••Mquick start guide1 disc playback Load a disc vertically into the Disc Insert Hole.Place a disc gently into the tray with the disc’s label facing up.Close the compartment by pressing the PLAY ( ) button.Playback starts automatically.1.•2.•Thank you for purchasing this Samsung 2.1CH Digital Home Theater System. We have manufactured this product to provide you with many hours of Audio/Video Entertainment. This “QUICK START GUIDE” guide has been included to getyou up and running in the least amount of time as possible.If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.Samsung Electronics America, Inc.1-800-SAMSUNG (7267864)www.samsung.com/us1 disc playback2 remote control functions3 connecting the wireless subwoofer4 connecting the video out to your tv5 connecting audio from external components6 listening to radio1 - English2 remote control functions18PORT buttonUSB port selection19TV/VIDEO buttonPress TV/VIDEO button to select the Videoinput on your TV.20EJECT button21CANCEL buttonUsed to cancel a wrong entry.22PAUSE buttonPress to pause.23PLAY button Press to play.STOP button Press to stop.SEARCH buttons Fast backward or forward through a song/scene.24TUNING/CH buttonPress to select the channel or to tune inradio broadcasting.25MUTE buttonPress to mute the sound.26RETURN buttonPress to return to the previous menu.27Cursor/ENTER buttonUsed to select or move up/down, left/right when setting the menu function.28SUBTITLE buttonSelects the disc subtitle language.29EXIT buttonPress to exit the setup screen.30INFO buttonView or change disc playback informationon screen.31REPEAT buttonRepeat playback of a chapter, title, group or track.32SOUND EDIT buttonAdjust the speaker sound settings andlevel.33ZOOM buttonEnlarges the picture during disc playback.34DIMMER buttonThe front display brightness will beadjusted.35S.VOL(Smart Volume) buttonMakes the sound more stable1DVD RECEIVER buttonYou can operate your DVD receiver with the remote control.2TV button You can operate your Samsung TV with the remote control.3POWER buttonPress to turn the Home Theater or your Samsung TV On/Off.4Number (0~9) buttons5REMAIN buttonYou can check the elapsed or remaining time on a disc.6STEP buttonThe picture moves forward one frame each time the button is pressed during playback.7Tuning Preset/CD Skip buttonsTune in radio broadcasting, skip thesong/scene.8VOLUME buttonPress + to raise the volume and – to lower it.9MENU buttonPress to see the menu.10AUDIO buttonSelects the Disc’s Audio language.11TUNER MEMORY, SD/HD buttonPress to memorize radio frequencies.Press to select SD or HD(Standard or High Defi nition ) mode.12LOGO buttonYou can make your own TV wallpaper (screen saver).13V-SOUND(Virtual Sound) buttonMakes virtual surround sound with just 2.1 channels.14P.BASS/AUDIO UPCALING button• Makes your MP3 sound better• Provides more powerful bass15SLEEP buttonPress to set the sleep off time.16SLOW buttonSelects three different slow motionplayback speeds.MO/ST buttonYou can listen to radio broadcasts inMONO or STEREO.17DVD button Press to select the DVD mode.TUNER button Press to listen to radio broadcasting.AUX button Press to select external audio input.2 - English3 connecting the wireless subwoofer3 - English353433313029282726252423222120191817161514131211109876543212.1CH DigitalHome Theater SystemHT-X81032The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from water and moisture. For optimal listening performance, make sure that the area around the wireless subwoofer location is clear of any obstructions.ID SET button POWER buttonHT-X810_QG_0303.indd 1-3 
OPTICAL : Connecting an External Digital ComponentDigital signal components such as a Cable Box/Satellite receiver (Set-Top Box). Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital component. Press the AUX button on the remote control to select DIGITAL IN.You can also use the FUNCTION button on the main unit.The mode switches as follows : DVD/CD ➝ D.IN ➝ AUX 1 ➝ AUX 2 ➝ USB ➝BT AUDIO ➝FM.1.2.•4 connecting the video out to your tvMETHOD 1 : HDMI (BEST QUALITY)Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Player to the HDMI IN jack on your TV.METHOD 2 : Component Video (BETTER QUALITY)If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the Component Video Output (Pr, Pb and Y) jacks on the back of the DVD Player to the Component Video Input jacks on your TV. METHOD 3 : Composite Video (GOOD QUALITY)Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the VIDEO IN jack on your TV.This product operates in Interlace scan mode (480i) for component output.If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate the Home Theater using the TV's remote control. This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC).Please check the logo (If your TV has an logo, then it supports the Anynet+ function.)MChoose one of the three methods for connecting to a TV.4 - English5connecting audio from external components5 - English6 listening to radioListening to RadioRemote Control Press the TUNER button to select the FM band.Tune in to the desired station.Automatic Tuning 1 : When the #,$ button is pressed, a preset broadcast station is selected.Automatic Tuning 2 : Press and hold the ,,. button to automatically search for active broadcasting stations.Manual Tuning : Briefl y press the ,,. button to increase or decrease the frequency incrementally.Main Unit Press the FUNCTION button to select the FM band.Select a broadcast station.Automatic Tuning 1 : Press the STOP() button to select PRESET and then press the #,$ button to select the preset station. Automatic Tuning 2 : Press the STOP() button to select MANUAL and then press and hold the #,$ button to automatically search the band.Manual Tuning : Press the STOP() button to select MANUAL and then briefl y press the #,$ button to tune in to a lower or higher frequency.Press the MO/ST button to listen in Mono/Stereo.• Each time the button is pressed, the sound switches between STEREO and MONO.• In a poor reception area, select MONO for a clear, interference-free broadcast.1.2.•••1.2.•••Connecting the FM Antenna6 - EnglishAUX2 : Connecting an External Analog ComponentAnalog signal components such as a VCR. Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component. Be sure to match connector colors. Press the AUX button on the remote control to select AUX 2 input. You can also use the FUNCTION button on the main unit.The mode switches as follows : DVD/CD ➝ D.IN ➝ AUX 1 ➝ AUX 2 ➝ USB ➝BT AUDIO ➝FM.You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this product.1.•2.•MAUX1 : Connecting an External Component/MP3 playerComponents such as an MP3 Player. Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external component/MP3 player. Press the AUX button on the remote control to select AUX1 input.You can also use the FUNCTION button on the main unit.The mode switches as follows : DVD/CD ➝ D.IN ➝AUX 1 ➝AUX 2 ➝USB ➝BT AUDIO ➝FM.1.2.•HDMI OUTHDMI OUTMETHOD3(supplied)METHOD2METHOD1Audio Cable(not supplied)Audio OUTOptical Cable(not supplied)External Digital ComponentHDMI OUTExternal Analog ComponentHDMI OUTAudio Cable (not supplied)If the external analog component has only one Audio Out, connect either left or right. Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack. Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it to a wall or other rigid surface.1.2.HDMI OUTFM Antenna(supplied)HT-X810_QG_0303.indd 4-6 
Digital HomeTheater Systemuser manualimagine the possibilitiesThank you for purchasing this Samsung product.To receive more complete service, please register your product atwww.samsung.com/global/registerHT-X810HT-X810_XAA_0303.indd 3 
Download:
Mirror Download [FCC.gov]
Document ID921324
Application IDquxDpuxGgzASr8Ydbzp6iw==
Document DescriptionUser manual 1 of 3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize136.95kB (1711896 bits)
Date Submitted2008-03-30 00:00:00
Date Available2008-03-30 00:00:00
Creation Date2008-03-22 17:59:44
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2008-03-22 10:01:36
Document TitleHT-X810_User Manual-1.pdf
Document CreatorPScript5.dll Version 5.2
Document Author: ltsai
FCC ID Filing: A3LHTX810

Navigation menu