Samsung Electronics Co IWBD1 Communication dongle User Manual
Samsung Electronics Co Ltd Communication dongle
User Manual
Communication dongle
IWB-D1
Company Samsung Electronics
Device Name Wireless Device for Data Communication (IWB-D1)
Manufacture Date 2011
Manufacturer/Country Alpha Networks / (confirmation needed)
1. Certification Mark
2. Product Specification
Frequency range 2405 MHz ~ 2480 MHz
Temperature 0℃~ 40℃
Data rate 500 kbps
Power Supply DC 5V
3. Appearance
4. How it works
- Cursor coordinates recognition
: IR sensor of the pen receives IR signal from the PDP panel, then process the coordinate
recognition from the signal.
- Data Transmission through USB Dongle
: Pen receives the coordinate data and other input commands from the PDP panel, and then
transmit to USB dongle. Through computer, the data is processed and generating the output
result on the panel.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
IMPORTANT NOTE:
Radiation Exposure Statement:
The product comply with the US/Canada portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in this
manual. The further RF exposure reduction can be achieved if the product can be kept
as far as possible from the user body or set the device to lower output power if such
function is available.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.