Samsung Electronics Co RMCFTJ1AP1 Smart Control User Manual
Samsung Electronics Co Ltd Smart Control Users Manual
Users Manual
: Press this button to mute the sound temporarily. -- Press and hold this button to bring up Accessibility Shortcuts that enables or disables Accessibility menus. : Turns the TV on and off. source: Displays and selects the available video sources. menu: Displays the menu on the screen. ;: Adjusts the volume. < P >: Changes the current channel. guide : Displays the Electronic Programme Guide (EPG). smart hub: Launches smart hub applications. (See the e-Manual chapter, "Smart Features > smart hub.") < > ¡ £: Moves the focus, and changes the values seen on the TV's menu. (Enter): Selects or runs a focused item. : Returns to the previous menu or channel. -- Press and hold this button to exit the currently running function on the TV's screen. : Controls the content when you are playing movies or music or viewing pictures. : Displays the numeric buttons, the content control button, and other function buttons on the screen so that you can run functions conveniently. pointer: Place a finger on the pointer button and move the Samsung Smart Control. The pointer on the screen moves in the direction you moved the Samsung Smart Control. Press the pointer button to select or run a focused item. English - 9 English The Samsung Smart Control Installing batteries into the Samsung Smart Control To use the Samsung Smart Control, push the rear cover open in the direction of the arrow and insert the batteries as shown in the figure. Make sure that the positive and negative ends are facing the correct direction. -- Alkaline batteries are recommended for longer battery life. Pairing the TV to the Samsung Smart Control If your Samsung Smart Control is not paired to your TV, press and hold the buttons labelled ① and ② simultaneously for 3 seconds or more to pair the Samsung Smart Control to the TV. -- The Samsung Smart Control can only be paired to one TV at a time. English - 10 FCC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Version 1.0 Samsung Electronics page 3 of 4 IC Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. IMPORTANT NOTE: IC Radiation Exposure Statement This device is in compliance with SAR for general population/uncontrolled exposure limits in IC RSS102 and has been tested in accordance with the measurement methods and procedures specified in IEEE 1528. The device and its antenna must not be co-located or operated in conjunction with any other antenna or transmitter. Version 1.0 Samsung Electronics page 4 of 4
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2016:05:13 13:02:48+09:00 Creator : Adobe InDesign CS5.5 (7.5.3) Modify Date : 2016:05:25 13:23:43+09:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2016:05:25 13:23:43+09:00 Creator Tool : Adobe InDesign CS5.5 (7.5.3) Format : application/pdf Document ID : uuid:f8ec8885-f879-4e91-808a-6bc6d72158b8 Instance ID : uuid:5e622653-ea0f-47c1-ad10-3daf72361282 Producer : Adobe PDF Library 9.9 Page Count : 4EXIF Metadata provided by EXIF.tools