| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2606778 |
| Application ID | uJ8te9+qqYhp0p7ZgjjSFw== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 401.39kB (5017413 bits) |
| Date Submitted | 2015-05-07 00:00:00 |
| Date Available | 2015-05-10 00:00:00 |
| Creation Date | 2015-04-09 16:15:45 |
| Document Lastmod | 2015-04-15 16:28:57 |
| Document Title | user manual |
User manual
S19E200BR
S19E200BW
S19E200NW
S19E200NY
S19E450BR
S19E450BW
S19E450MR
S19E450MW
S22E200B
S22E200BW
S22E200N
S22E200NY
S22E450B
S22E450BW
S22E450D
S22E450DW
S22E450M
S22E450MW
S23E200B
S23E450B
S24E200BL
S24E450B
S24E450BL
S24E450D
S24E450DL
S24E450M
S24E650BW
S27E450B
S27E450D
The color and the appearance may differ depending on the product, and
the specifications are subject to change without prior notice to improve the
performance.
BN46-00478A-01
Table Of Contents
BEFORE USING THE
PRODUCT
PREPARATIONS
Copyright
Icons used in this manual
Cleaning
10
Securing the Installation Space
10
Precautions for storage
11
Safety Precautions
11
12
13
15
Symbols
Electricity and Safety
Installation and Safety
Operation and Safety
19
Correct posture to use the product
20
Checking the Components
20
Checking the Components
22
Parts
22
24
26
28
30
31
32
33
34
Frontal Buttons (SE200 Series)
Frontal Buttons (S**E450B*, S**E650B*)
Frontal Buttons (S**E450M*)
Frontal Buttons (S**E450D*)
Reverse Side (SE200 Series)
Reverse Side (S**E450B*, S**E650B*)
Reverse Side (S**E450M*)
Reverse Side ( S**E450D*)
Right Side View (S**E450D*)
35
Installation
35
36
37
38
39
Attaching the Stand (SE200 Series)
Attaching the Stand (SE450, SE650 Series)
Removing the Stand (SE200 Series)
Adjusting the Product Tilt (SE200 Series)
Adjusting the Product Tilt and Height (SE450,
SE650 Series)
Rotating the Monitor (SE450, SE650 Series)
Installing a Wall-mount Kit or Desktop Stand
Anti-theft Lock
40
41
44
Table Of Contents
Table Of Contents
CONNECTING AND USING
A SOURCE DEVICE
SCREEN SETUP
45
Before Connecting
45
Pre-connection Checkpoints
46
Connecting and Using a PC
46
50
54
55
Connecting to a PC
Connecting the Power
Driver Installation
Setting Optimum Resolution
56
Brightness
56
Configuring Brightness
57
Contrast
57
Configuring Contrast
58
Sharpness
58
Configuring Sharpness
59
Eye Saver Mode
59
Configuring Eye Saver Mode
60
Game Mode
60
Configuring Game Mode
61
SAMSUNG MAGIC Bright
61
Configuring SAMSUNG MAGIC Bright
62
SAMSUNG MAGIC Angle (Except
S19E200NY / S22E200NY)
62
Configuring SAMSUNG MAGIC Angle
64
SAMSUNG MAGIC Upscale
64
Configuring SAMSUNG MAGIC Upscale
65
Image Size (Except S19E200BR /
S19E450BR / S19E450MR)
65
Changing the Image Size
67
H-Position & V-Position
67
Configuring H-Position & V-Position
Table Of Contents
Table Of Contents
CONFIGURING TINT
RESIZING OR
RELOCATING THE
SCREEN
SETUP AND RESET
68
Coarse
68
Adjusting Coarse
69
Fine
69
Adjusting Fine
70
Red
70
Configuring Red
71
Green
71
Configuring Green
72
Blue
72
Configuring Blue
73
Color Tone
73
Configuring the Color Tone Settings
74
Gamma
74
Configuring Gamma
75
Language
75
Changing the Language
76
Menu H-Position & Menu V-Position
76
Configuring Menu H-Position & Menu VPosition
77
Display Time
77
Configuring Display Time
78
Transparency
78
Changing Transparency
79
Reset All
79
Initializing Settings (Reset All)
80
Smart Eco Saving
80
Configuring Smart Eco Saving
Table Of Contents
Table Of Contents
81
Off Timer (S19E200NW / S19E200NY /
S22E200N /S22E200NY)
81
82
Configuring Off Timer
Configuring Turn Off After
83
Off Timer Plus (Except S19E200NW /
S19E200NY / S22E200N / S22E200NY)
83
85
Configuring Off Timer
Configuring Eco Timer
87
PC/AV Mode (Except S19E200NW /
S19E200NY / S22E200N / S22E200NY)
87
Configuring PC/AV Mode
88
Key Repeat Time
88
Configuring Key Repeat Time
89
Source Detection (Except S19E200NW /
S19E200NY / S22E200N / S22E200NY)
89
Configuring Source Detection
90
INFORMATION
90
Displaying INFORMATION
91
Configuring Brightness, Contrast and
Sharpness from the Initial Screen
92
Configuring Volume in the Initial Screen
INSTALLING THE
SOFTWARE
93
MultiScreen
93
94
Installing the Software
Removing the Software
TROUBLESHOOTING
GUIDE
95
Requirements Before Contacting
Samsung Customer Service Center
95
95
95
Testing the Product
Checking the Resolution and Frequency
Check the following.
98
Q&A
INFORMATION MENU AND
OTHERS
Table Of Contents
Table Of Contents
SPECIFICATIONS
APPENDIX
100
General (S19E200NY / S19E200NW)
102
General (S19E200BW / S19E200BR)
104
General (S22E200NY)
105
General (S22E200B / S22E200N /
S22E200BW)
107
General (S23E200B / S24E200BL)
109
General (S19E450BW / S19E450MW /
S19E450BR / S19E450MR)
111
General (S22E450B / S22E450M /
S22E450D)
113
General (S22E450BW / S22E450MW /
S22E450DW)
115
General (S23E450B)
117
General (S24E450BL / S24E450DL)
119
General (S24E450B / S24E450M /
S24E450D)
121
General (S24E650BW)
123
General (S27E450B / S27E450D)
125
PowerSaver
129
Standard Signal Mode Table
137
Responsibility for the Pay Service (Cost
to Customers)
137
137
137
Not a product defect
A Product damage caused by customer's fault
Others
139
Correct Disposal
139
Correct Disposal of This Product (Waste
Electrical & Electronic Equipment)
139
Extended warranty
Table Of Contents
Table Of Contents
140
Terminology
INDEX
Table Of Contents
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2015 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is
prohibited.
Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
An administration fee may be charged if either
(a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
(b) you bring the unit to a repair center and there is no defect in the product
(i.e. where you have failed to read this user manual).
The amount of such administration charge will be advised to you before any work or home visit is
carried out.
Icons used in this manual
The following images are for reference only. Real-life situations may
differ from what is shown in the images.
Before Using the Product
Before Using the Product
Cleaning
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
1. Power off the monitor and computer.
2. Disconnect the power cord from the monitor.
Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
3. Wipe the monitor screen using a clean, soft and dry cloth.
Do not apply a cleaning agent that contains alcohol,
solvent, or surfactant to the monitor.
Do not spray water or detergent directly on the product.
4. Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the monitor.
5. Connect the power cord to the product after cleaning the product.
6. Power on the monitor and computer.
Before Using the Product
Before Using the Product
Securing the Installation Space
Ensure some space around the product for ventilation. An internal temperature rise may cause fire
and damage the product. Be sure to allow the amount of space as shown below or greater when
installing the product.
The exterior may differ depending on the product.
SE200 Series
3.93 inches
(10 cm)
3.93 inches (10 cm)
3.93
inches
(10 cm)
3.93
inches
(10 cm)
3.93 inches (10 cm)
SE450, SE650 Series
3.93 inches
(10 cm)
3.93 inches (10 cm)
3.93
inches
(10 cm)
3.93
inches
(10 cm)
3.93 inches (10 cm)
Precautions for storage
Be sure to contact Samsung Customer Service Center if the inside of the monitor needs cleaning. (A
service fee will be charged.)
Before Using the Product
10
Before Using the Product
Safety Precautions
Caution
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside. It is dangerous to
make any kind of contact with any internal part of this product.
This symbol alerts you that important literature concerning operation and
maintenance has been included with this product.
Symbols
Warning
A serious or fatal injury may result if instructions are not followed.
Caution
Personal injury or damage to properties may result if instructions are
not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
Before Using the Product
11
Before Using the Product
Electricity and Safety
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
An electric shock or fire may result.
Do not plug many products into the same power socket.
Otherwise, the socket may overheat and cause a fire.
Do not touch the power plug with wet hands.
Otherwise, an electric shock may result.
Insert the power plug all the way in so it is not loose.
An unstable connection may cause a fire.
Ensure you connect the power plug to a grounded power socket. (type 1
insulated devices only).
An electric shock or injury may result.
Do not bend or pull the power cord with force. Do not weigh the power cord
down with a heavy object.
A damaged power cord may cause an electric shock or fire.
Do not place the power cord or product near heat sources.
An electric shock or fire may result.
Remove foreign substances such as dust around the plug pins and power socket
with a dry cloth.
Otherwise, a fire may result.
Before Using the Product
12
Before Using the Product
Caution
Do not unplug the power cord when the product is in use.
The product may become damaged by an electric shock.
Do not use the power cord for products other than authorized products supplied
by Samsung.
An electric shock or fire may result.
Keep the power socket where the power cord is connected unobstructed.
If any problem occurs in the product, unplug the power cable to completely
cut the power to the product.
Power to the product cannot be completely cut off with the power button.
Hold the plug when disconnecting the power cord from the power socket.
An electric shock or fire may result.
Installation and Safety
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP
OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
Otherwise, a fire may result.
Avoid installing the product in a narrow space with bad ventilation, such as a
bookshelf or wall closet.
Otherwise, a fire may result due to an increased internal temperature.
Keep the plastic packaging bag for the product in a place that cannot be reached
by children.
Children may suffocate.
Before Using the Product
13
Before Using the Product
Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.).
The product may fall and break or cause a personal injury.
Using the product in an area with excess vibration may damage the product
or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water
drips, etc.), oil, or smoke.
An electric shock or fire may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.
Otherwise, the product lifespan may be reduced, or a fire may result.
Do not install the product within the reach of young children.
The product may fall and injure children.
Edible oil, such as soybean oil, can damage or deform the product. Do not install
the product in a kitchen or near a kitchen counter.
Caution
Take care not to drop the product when moving it.
Otherwise, product failure or personal injury may result.
Do not set down the product on its front.
The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom
edge of the front of the product is not protruding.
The product may fall and break or cause a personal injury.
Install the product only on cabinets or shelves of the right size.
Before Using the Product
14
Before Using the Product
Put down the product carefully.
The product may fall and break or cause a personal injury.
SAMSUNG
Installing the product in an unusual place (a place exposed to a lot of fine dust,
chemical substances, extreme temperatures or a significant presence of
moisture, or a place where the product will operate continuously for an extended
period of time) may seriously affect its performance.
Be sure to consult Samsung Customer Service Center before installation if
you want to install the product at such a place.
Operation and Safety
Warning
High voltage runs through the product. Do not attempt to disassemble, repair, or
modify the product on your own.
An electric shock or fire may result.
Contact Samsung Customer Service Center for repair.
To move the product, first disconnect all the cables from it, including the power
cable.
Otherwise, the power cord may be damaged and a fire or electric shock may
result.
If the product generates a strange noise, a burning smell, or smoke, remove the
power cord immediately and contact Samsung Customer Service Center.
An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
The product may fall, and your child may become injured or seriously
harmed.
If the product falls or the exterior is damaged, power off the product, remove the
power cord, and contact Samsung Customer Service Center.
Otherwise, an electric shock or fire may result.
Do not put a heavy object, toy, or sweets on top of the product.
The product or heavy objects may fall as children try to reach for the toy or
sweets resulting in a serious injury.
Before Using the Product
15
Before Using the Product
If there is a thunderstorm or lightning strike, turn off the power and disconnect the
power cable.
An electric shock or fire may result.
Do not drop objects on the product or apply impact.
An electric shock or fire may result.
Do not move the product by pulling the power cord or any cable.
Otherwise, the cable may be damaged and product failure, an electric shock
or fire may result.
If a gas leakage is found, do not touch the product or power plug. Also, ventilate
the area immediately.
GAS
Sparks can cause an explosion or fire.
Do not lift or move the product by pulling the power cord or any cable.
Otherwise, the cable may be damaged and product failure, an electric shock
or fire may result.
Do not use or keep combustible spray or an inflammable substance near the
product.
An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
100
Otherwise, a fire may result from an increased internal temperature.
Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable
object (paper, match, etc.) into the vent or ports of the product.
If water or any foreign substance enters the product, be sure to power off the
product, remove the power cord, and contact Samsung Customer Service
Center.
Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
If water or any foreign substance enters the product, be sure to power off the
product, remove the power cord, and contact Samsung Customer Service
Center.
Product failure, an electric shock or fire may result.
Before Using the Product
16
Before Using the Product
Caution
Leaving the screen fixed on a stationary image for an extended period of time
may cause afterimage burn-in or defective pixels.
If you are not going to use the product for an extended period of time,
activate power-saving mode or a moving-picture screen saver.
-_!
Disconnect the power cord from the power socket if you do not plan on using the
product for an extended period of time (vacation, etc.).
Otherwise, a fire may result from accumulated dust, overheating, an electric
shock, or electric leakage.
Use the product at the recommended resolution and frequency.
Otherwise,Your eyesight may deteriorate.
Do not put DC power adapters together.
Otherwise, a fire may result.
Remove the plastic bag from the DC power adapter before you use it.
Otherwise, a fire may result.
Do not let water enter the DC power device or get the device wet.
An electric shock or fire may result.
Avoid using the product outdoors where it can be exposed to rain or snow.
Be careful not to get the DC power adapter wet when you wash the floor.
Do not put the DC power adapter near to any heating apparatus.
Otherwise, a fire may result.
Keep the DC power adapter in a well-ventilated area.
Looking at the screen too close for an extended period of time can deteriorate
your eyesight.
Before Using the Product
17
Before Using the Product
Do not hold the monitor upside-down or move it by holding the stand.
The product may fall and break or cause a personal injury.
Do not use humidifiers or stoves around the product.
An electric shock or fire may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
Eye fatigue will be relieved.
Do not touch the screen when the product has been turned on for an extended
period of time as it will become hot.
Store the small accessories used with the product out of reach of children.
Exercise caution when adjusting the product angle or stand height.
Otherwise, children's fingers or hands may become stuck and injured.
Tilting the product excessively may cause it to fall and result in personal
injury.
Do not place heavy objects on the product.
Product failure or personal injure may result.
When using headphones or earphones, do not turn the volume too high.
Having the sound too loud may damage your hearing.
Before Using the Product
18
Before Using the Product
Correct posture to use the product
Use the product in the correct posture as follows:
Straighten your back.
Allow a distance of 45 to 50 cm between your eye and the screen, and look slightly
downward at the screen.
Keep your eyes directly in front of the screen.
Adjust the angle so light does not reflect on the screen.
Keep your forearms perpendicular to your upper arms and level with the back of
your hands.
Keep your elbows at about a right angle.
Adjust the height of the product so you can keep your knees bent at 90 degrees or
more, your heels attached to the floor, and your arms lower than your heart.
Before Using the Product
19
1
1.1
Preparations
Checking the Components
1.1.1 Checking the Components
Contact the dealer from whom you purchased the product if any item is missing.
The pictures may look different from the actual components.
Components
Quick setup guide
User manual
(optional)
Warranty card (Not available in
some locations)
Power cable
Regulatory guide
(optional)
D-SUB cable
(optional)
DP cable
DVI cable
HDMI-DVI cable
(optional)
(optional)
Stereo Cable
USB cable
Stand base
For S**E450M* Model
For S**E450D* Model
For SE200 Series Model
(optional)
(optional)
(optional)
For S**E450D* Model
(optional)
1 Preparations
20
1
Preparations
Stand base
For SE450 Series Model,
For S**E650B* Model
(optional)
Stand base
For S**E450D* Model
Stand neck
(Applicable to the stand models
that have USB ports only.)
For SE200 Series Model
(optional)
(optional)
Stand neck
For SE450 Series Model,
For S**E650B* Model
(optional)
Components may vary depending on the country.
1 Preparations
21
1
1.2
Preparations
Parts
1.2.1 Frontal Buttons (SE200 Series)
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Key Guide
MENU
EYE
SAVER
SOURCE
AUTO
MENU
EYE
SAVER
SOURCE
AUTO
Icons
Description
MENU
Open or close the onscreen display (OSD) menu, or return to the parent
menu.
OSD control lock: Maintain the current settings, or lock the OSD control
to prevent unintended changes to settings. Enable: To lock the OSD
control, press the [ MENU ] button for 10 seconds. Disable: To unlock the
locked OSD control, press the [ MENU ] button for more than 10 seconds.
If the OSD control is locked,
Brightness and Contrast can be adjusted. Eye Saver Mode is
available. INFORMATION can be viewed.
The Eye Saver Mode function can be used by pressing the [
button. (The Eye Saver Mode is available even when the OSD
control is locked.)
Press [
] to enable or disable Eye Saver Mode.
The items below are not available if the Eye Saver Mode function is enable.
SAMSUNG
SAMSUNG
Brightness, Game Mode, MAGIC
Bright, MAGIC
Angle
PICTURE
COLOR
SETUP&RESET
Smart Eco Saving
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
1 Preparations
22
1
Preparations
Icons
Description
Use this button to control the brightness, contrast and sharpness of the
screen.
Confirm a menu selection.
Pressing the [
] button when the OSD menu is not displayed will
change the input source (Analog/DVI). If you power on the product or
change the input source by pressing the [
] button, a message that
shows the changed input source will appear at the top left corner of the
screen.
This function is not available for products with an Analog interface
only.
Press the [AUTO] button to automatically adjust the screen settings.
AUTO
Changing the resolution in Display Properties will activate the
Auto Adjustment function.
This function is only available in Analog mode.
Turn the screen on or off.
When a control button on the product is pressed, the Key Guide will be
displayed before the onscreen menu opens. (The guide shows the
function of the button pressed.)
Key Guide
To access the onscreen menu when the guide is displayed, press the
corresponding button again.
The Key Guide may vary depending on the function or product model.
Refer to the actual product.
1 Preparations
23
1
Preparations
1.2.2 Frontal Buttons (S**E450B*, S**E650B*)
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Key Guide
MENU
EYE
SAVER
SOURCE
AUTO
Icons
Description
MENU
Open or close the onscreen display (OSD) menu, or return to the parent
menu.
OSD control lock: Maintain the current settings, or lock the OSD control
to prevent unintended changes to settings. Enable: To lock the OSD
control, press the [ MENU ] button for 10 seconds. Disable: To unlock the
locked OSD control, press the [ MENU ] button for more than 10 seconds.
If the OSD control is locked,
Brightness and Contrast can be adjusted. Eye Saver Mode is
available. INFORMATION can be viewed.
The Eye Saver Mode function can be used by pressing the [
button. (The Eye Saver Mode is available even when the OSD
control is locked.)
Press [
] to enable or disable Eye Saver Mode.
The items below are not available if the Eye Saver Mode function is enable.
SAMSUNG
SAMSUNG
Brightness, Game Mode, MAGIC
Bright, MAGIC
Angle
PICTURE
COLOR
SETUP&RESET
Smart Eco Saving
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Use this button to control the brightness, contrast and sharpness of the
screen.
1 Preparations
24
1
Preparations
Icons
Description
Confirm a menu selection.
Pressing the [
] button when the OSD menu is not displayed will
change the input source (Analog/DVI). If you power on the product or
change the input source by pressing the [
] button, a message that
shows the changed input source will appear at the top left corner of the
screen.
This function is not available for products with an Analog interface
only.
Press the [AUTO] button to automatically adjust the screen settings.
AUTO
Changing the resolution in Display Properties will activate the
Auto Adjustment function.
This function is only available in Analog mode.
Turn the screen on or off.
When a control button on the product is pressed, the Key Guide will be
displayed before the onscreen menu opens. (The guide shows the
function of the button pressed.)
Key Guide
To access the onscreen menu when the guide is displayed, press the
corresponding button again.
The Key Guide may vary depending on the function or product model.
Refer to the actual product.
1 Preparations
25
1
Preparations
1.2.3 Frontal Buttons (S**E450M*)
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Key Guide
MENU
EYE
SAVER
SOURCE
AUTO
Icons
Description
MENU
Open or close the onscreen display (OSD) menu, or return to the parent
menu.
OSD control lock: Maintain the current settings, or lock the OSD control
to prevent unintended changes to settings. Enable: To lock the OSD
control, press the [ MENU ] button for 10 seconds. Disable: To unlock the
locked OSD control, press the [ MENU ] button for more than 10 seconds.
If the OSD control is locked,
Brightness and Contrast can be adjusted. Eye Saver Mode is
available. INFORMATION can be viewed.
The Eye Saver Mode function can be used by pressing the [
button. (The Eye Saver Mode is available even when the OSD control
is locked.)
Press [
] to enable or disable Eye Saver Mode.
The items below are not available if the Eye Saver Mode function is enable.
SAMSUNG
SAMSUNG
Brightness, Game Mode, MAGIC
Bright, MAGIC
Angle
PICTURE
COLOR
SETUP&RESET
Smart Eco Saving
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Use this button to control the brightness and contrast of the screen.
Volume can be adjusted if a cable is connected to the [IN] port.
1 Preparations
26
1
Preparations
Icons
Description
Confirm a menu selection.
Pressing the [
] button when the OSD menu is not displayed will
change the input source (Analog/DVI). If you power on the product or
change the input source by pressing the [
] button, a message that
shows the changed input source will appear at the top left corner of the
screen.
This function is not available for products with an Analog interface
only.
Press the [AUTO] button to automatically adjust the screen settings.
AUTO
Changing the resolution in Display Properties will activate the
Auto Adjustment function.
This function is only available in Analog mode.
Turn the screen on or off.
When a control button on the product is pressed, the Key Guide will be
displayed before the onscreen menu opens. (The guide shows the
function of the button pressed.)
Key Guide
To access the onscreen menu when the guide is displayed, press the
corresponding button again.
The Key Guide may vary depending on the function or product model.
Refer to the actual product.
1 Preparations
27
1
Preparations
1.2.4 Frontal Buttons (S**E450D*)
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Key Guide
MENU
EYE
SAVER
SOURCE
AUTO
Icons
Description
MENU
Open or close the onscreen display (OSD) menu, or return to the parent
menu.
OSD control lock: Maintain the current settings, or lock the OSD control
to prevent unintended changes to settings. Enable: To lock the OSD
control, press the [ MENU ] button for 10 seconds. Disable: To unlock the
locked OSD control, press the [ MENU ] button for more than 10 seconds.
If the OSD control is locked,
Brightness and Contrast can be adjusted. Eye Saver Mode is
available. INFORMATION can be viewed.
The Eye Saver Mode function can be used by pressing the [
button. (The Eye Saver Mode is available even when the OSD control
is locked.)
Press [
] to enable or disable Eye Saver Mode.
The items below are not available if the Eye Saver Mode function is enable.
SAMSUNG
SAMSUNG
Brightness, Game Mode, MAGIC
Bright, MAGIC
Angle
PICTURE
COLOR
SETUP&RESET
Smart Eco Saving
Move to the upper or lower menu or adjust the value for an option on the OSD
menu.
Use this button to control the brightness, contrast and sharpness of the
screen.
1 Preparations
28
1
Preparations
Icons
Description
Confirm a menu selection.
Pressing the [
] button when the OSD menu is not displayed will change
the input source (Analog/DVI/DisplayPort). If you power on the product or
change the input source by pressing the [
] button, a message that shows
the changed input source will appear at the top left corner of the screen.
This function is not available for products with an Analog interface
only.
Press the [AUTO] button to automatically adjust the screen settings.
AUTO
Changing the resolution in Display Properties will activate the Auto
Adjustment function.
This function is only available in Analog mode.
Turn the screen on or off.
When a control button on the product is pressed, the Key Guide will be displayed
before the onscreen menu opens. (The guide shows the function of the button
pressed.)
Key Guide
To access the onscreen menu when the guide is displayed, press the
corresponding button again.
The Key Guide may vary depending on the function or product model.
Refer to the actual product.
1 Preparations
29
1
Preparations
1.2.5 Reverse Side (SE200 Series)
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
DVI IN
DVI IN
RGB IN
POWER IN
POWER IN
RGB IN
Port
Description
Connect to a PC using the DVI cable.
The [DVI IN] terminal is supplied for the digital (DVI)-dedicated
models only.
Connect to a PC using the D-SUB cable.
Connect to an external device.
Connect the power cord for your monitor to the [POWER IN] port on
the back of the product.
1 Preparations
30
1
Preparations
1.2.6 Reverse Side (S**E450B*, S**E650B*)
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
DVI IN
DVI IN
RGB IN
POWER IN
POWER IN
RGB IN
Port
Description
Connect to a PC using the DVI cable.
The [DVI IN] terminal is supplied for the digital (DVI)-dedicated
models only.
Connect to a PC using the D-SUB cable.
Connect to an external device.
Connect the power cord for your monitor to the [POWER IN] port on
the back of the product.
1 Preparations
31
1
Preparations
1.2.7 Reverse Side (S**E450M*)
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
DVI IN
RGB IN
POWER IN
AUDIO IN/OUT
AUDIO IN/OUT
DVI IN
RGB IN
POWER IN
OUT
IN
Port
Description
Connect to a PC using the DVI cable.
The [DVI IN] terminal is supplied for the digital (DVI)-dedicated
models only.
Connect to a PC using the D-SUB cable.
Connect to an audio output device such as headphones.
OUT
Applicable to the models that have speakers only.
Connect to an audio-input source using an audio cable.
IN
Applicable to the models that have speakers only.
Connect to an external device.
Connect the power cord for your monitor to the [POWER IN] port on
the back of the product.
1 Preparations
32
1
Preparations
1.2.8 Reverse Side ( S**E450D*)
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
DVI IN
DVI IN
RGB IN
RGB IN
DP IN
POWER IN
POWER IN
DP IN
Port
Description
Connect to a PC using the DVI cable.
The [DVI IN] terminal is supplied for the digital (DVI)-dedicated
models only.
Connect to a PC using the D-SUB cable.
Connect to a PC using a DP cable.
Connect to a computer using a USB cable.
This port can connect to a PC only.
Applicable to the stand models that have USB ports only.
Connect to an external device.
Connect the power cord for your monitor to the [POWER IN] port on
the back of the product.
1 Preparations
33
1
Preparations
1.2.9 Right Side View (S**E450D*)
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Port
Description
Connect to a source device using a USB cable.
1 Preparations
34
1
1.3
Preparations
Installation
1.3.1 Attaching the Stand (SE200 Series)
Before assembling the product, place the product down on a flat and stable surface so that the screen
is facing downwards.
Insert the Stand Connector into
the Stand in the direction shown
by the figure.
Check if the Stand Connector is
firmly connected.
Turn the connecting screw at the
bottom of the stand fully so that it
is completely fixed.
Place a soft cloth over the table
to protect the product and place
the product onto the cloth so
that the front of the product is
facing downwards.
Hold the main body of the
product with your hand as
shown by the figure.
- Caution
Do not hold the product upside
down only by the stand.
Push the assembled stand into
the main body in the direction of
the arrow as shown in the figure.
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
1 Preparations
35
1
Preparations
1.3.2 Attaching the Stand (SE450, SE650 Series)
Place a protective cloth or
cushion on a flat surface. Next,
place the product with the face
down on top of the cloth or
cushion.
Do not remove the fixing pin until Insert the stand base into the
you are finished attaching the
stand in the direction of the
stand.
arrow.
Fasten the screw tightly (using a
screwdriver or coin) into the
bottom of the stand base.
After installing the stand, place
the product upright.
You can remove the fixing pin
and adjust the stand now.
- Caution
Do not hold the product upside
down only by the stand.
Disassembly is the reverse order of assembly.
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
1 Preparations
36
1
Preparations
1.3.3 Removing the Stand (SE200 Series)
The exterior may differ depending on the product.
Place a soft cloth over the table to protect the product and
place the product onto the cloth so that the front of the product
faces downwards.
While holding the stand neck with one hand, pound the other
fisted hand down onto the top of the stand base in the direction
of the arrow to detach the stand base.
Turn the connecting screw at the bottom of the stand base to
separate it.
Remove the stand neck from the stand base by pulling it in the
direction of the arrow as shown in the figure.
1 Preparations
37
1
Preparations
1.3.4 Adjusting the Product Tilt (SE200 Series)
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
-1° (-
2°/+
1°) -
20°
(0°/+
2°)
You can adjust the tilt of your monitor.
Hold the lower part of the product and adjust the tilt carefully.
1 Preparations
38
1
Preparations
1.3.5 Adjusting the Product Tilt and Height (SE450, SE650 Series)
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
19"-24"
27"
19"-22" (without a USB port)
23"-27" / 21.5", 22" (with a USB port)
0 (± 5 mm) 100 mm (± 5 mm)
To adjust the height, remove the fixing pin.
The monitor tilt and height can be adjusted.
Hold the top center of the product and adjust the height carefully.
0 (± 5 mm) 130 mm (± 5 mm)
1 Preparations
39
1
Preparations
1.3.6 Rotating the Monitor (SE450, SE650 Series)
You can rotate your monitor as shown below.
Be sure to fully extend the stand before rotating the monitor.
If you rotate the monitor without fully extending the stand, the corner of the monitor may hit the
floor and get damaged.
Do not rotate the monitor counterclockwise. The monitor may get damaged.
1 Preparations
40
1
Preparations
1.3.7 Installing a Wall-mount Kit or Desktop Stand
Before Installation
Power the product off and remove the power cable from the power socket.
SE200 Series
Place a protective cloth or cushion on a flat
surface. Next, place the product with the face
down on top of the cloth or cushion.
Hold the main body of the product with your hand
as shown by the figure.
Pull the stand in the direction of the arrow as
shown in the figure to separate it.
SE450, SE650 Series
Place a protective cloth or
cushion on a flat surface. Next,
place the product with the face
down on top of the cloth or
cushion.
Unfasten the screw from the
back of the product.
Lift and detach the stand.
1 Preparations
41
1
Preparations
Installing a Wall-mount Kit or Desktop Stand (SE200 Series)
A Attach the wall-mount kit or desktop stand here
B Bracket (sold separately)
Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding
parts on the wall-mount kit or desktop stand you want to attach.
Notes
Using a screw longer than the standard length can damage the internal components of the
product.
The length of screws required for a wall mount that does not comply with the VESA standards may
vary depending on the specifications.
Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit
or desktop stand using excessive force. The product may get damaged or fall and cause personal
injury. Samsung shall not be held liable for any damage or injury caused by using improper screws
or attaching the wall-mount kit or desktop stand using excessive force.
Samsung shall not be held liable for any product damage or personal injury caused by using a wallmount kit other than the one specified or from an attempt to install the wall-mount kit on your own.
To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10cm
or farther away from the wall.
Be sure to use a wall-mount kit that complies with the standards.
1 Preparations
42
1
Preparations
Installing a Wall-mount Kit or Desktop Stand (SE450, SE650 Series)
BB
A Attach the wall-mount kit or desktop stand here
B Bracket (sold separately)
Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding
parts on the wall-mount kit or desktop stand you want to attach.
Notes
Using a screw longer than the standard length can damage the internal components of the
product.
The length of screws required for a wall mount that does not comply with the VESA standards may
vary depending on the specifications.
Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit
or desktop stand using excessive force. The product may get damaged or fall and cause personal
injury. Samsung shall not be held liable for any damage or injury caused by using improper screws
or attaching the wall-mount kit or desktop stand using excessive force.
Samsung shall not be held liable for any product damage or personal injury caused by using a wallmount kit other than the one specified or from an attempt to install the wall-mount kit on your own.
To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10cm
or farther away from the wall.
Be sure to use a wall-mount kit that complies with the standards.
To install the monitor using a wall mount, disconnect the stand base from the monitor.
1 Preparations
43
1
Preparations
1.3.8 Anti-theft Lock
An anti-theft lock allows you to use the product securely even in public places. The locking device shape
and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft
locking device for details. The lock device is sold separately.
SE200 Series
DVI IN
RGB IN
POWER IN
SE450, SE650 Series
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
To lock an anti-theft locking device:
Fix the cable of your anti-theft locking device to a heavy object such as a desk.
Put one end of the cable through the loop on the other end.
Insert the locking device into the anti-theft lock slot at the back of the product.
Lock the locking device.
An anti-theft locking device can be purchased separately.
Refer to the user guide provided with your anti-theft locking device for details.
Anti-theft locking devices can be purchased at electronics retailers or online.
1 Preparations
44
2
2.1
Connecting and Using a Source Device
Before Connecting
2.1.1 Pre-connection Checkpoints
Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
Check the types of ports at the back of the product you want to connect.
2 Connecting and Using a Source Device
45
2
2.2
Connecting and Using a Source Device
Connecting and Using a PC
2.2.1 Connecting to a PC
Select a connection method suitable for your PC.
Connecting parts may differ in different products.
The exterior may differ depending on the product.
Connection Using the D-SUB Cable (Analog Type)
Do not connect the power cable before connecting all other cables. Ensure you connect a source
device first before connecting the power cable.
SE200 Series
RGB IN
DVI IN
RGB IN
SE450, SE650 Series
RGB IN
DVI IN
RGB
IN
Connect the D-SUB cable to the [RGB IN] port on the back of the product and the RGB port on the
PC.
Connect A to the [RGB IN] port on the product, then connect B to the RGB port on the
computer.
Press [
] to change the input source to Analog.
This function is not available for products with an Analog interface only.
2 Connecting and Using a Source Device
46
2
Connecting and Using a Source Device
Connection Using the DVI Cable
Do not connect the power cable before connecting all other cables. Ensure you connect a source
device first before connecting the power cable.
SE200 Series
DVI IN
DVI IN
RGB IN
SE450, SE650 Series
DVI IN
RGB
DVI IN
IN
Connect the DVI cable to the [DVI IN] port on the back of the product and the DVI port on the PC.
Connect A to the [DVI IN] port on the product, then connect B to the DVI port on the computer.
Press [
] to change the input source to DVI.
The [DVI IN] terminal is supplied for the digital (DVI)-dedicated models only.
2 Connecting and Using a Source Device
47
2
Connecting and Using a Source Device
Connection Using the DVI-HDMI Cable
Do not connect the power cable before connecting all other cables. Ensure you connect a source
device first before connecting the power cable.
SE200 Series
DVI IN
DVI IN
RGB IN
SE450, SE650 Series
DVI IN
DVI IN
RGB IN
Connect the HDMI-DVI cable to the [DVI IN] port on the back of the product and the HDMI port on
the PC.
Press [
] to change the input source to DVI.
The [DVI IN] terminal is supplied for the digital (DVI)-dedicated models only.
2 Connecting and Using a Source Device
48
2
Connecting and Using a Source Device
Connection Using the DP Cable
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
S**E450D*
DP IN
DP IN
RGB
IN
DVI IN
Connect the DP cable to the [DP IN] port on the back of the product and the DP port on the PC.
Press [
] to change the input source to DisplayPort.
Connecting to Headphones or Speakers
Do not connect the power cable before connecting all other cables. Ensure you connect a source
device first before connecting the power cable.
S**E450M*
IN
RGB
IN
DVI IN
OUT
Connect an audio output device such as headphones or speakers to [ OUT ] port on the product.
Applicable to the models that have speakers only.
Connect an audio input device such as a computer to the [ IN ] port on the product.
Applicable to the models that have speakers only.
2 Connecting and Using a Source Device
49
2
Connecting and Using a Source Device
2.2.2 Connecting the Power
Connecting parts may differ in different products.
The exterior may differ depending on the product.
To use the product, connect the power cable to a power outlet and the [POWER IN] port on the
product.
SE200 Series
POWER IN
DVI IN
RGB IN
SE450, SE650 Series
POWER IN
DVI IN
RGB
IN
The input voltage is switched automatically.
2 Connecting and Using a Source Device
50
2
Connecting and Using a Source Device
Connecting USB (S**E450D* Models)
The [
Applicable to the stand models that have USB ports only.
You can use a USB device such as a mouse, keyboard, memory stick or external hard disk drive
(HDD) by connecting it directly to the [
] port on the monitor. You do not need to connect it to
the computer.
An external mass-storage HDD requires an external power supply and be sure to connect it to a
power source.
] USB port of the monitor supports High-Speed Certified USB 2.0.
High speed
Full speed
Low speed
Data Rate
480 Mbps
12 Mbps
1.5 Mbps
Power Consumption
2.5 W
(Max., each port)
2.5 W
(Max., each port)
2.5 W
(Max., each port)
DVI IN
RGB
IN
DP IN
Connect the [
]port of the monitor and the USB port of the computer with the USB cable.
To use [
] port, you have to connect the UP (Upstream Cable) to the PC.
Make sure to use the USB cable supplied with this monitor to connect the monitor's [
port and your computer's USB port.
USB
2 Connecting and Using a Source Device
51
2
Connecting and Using a Source Device
Connect the [
] port of the USB monitor and a USB device with the USB cable.
The use procedures are as the same as those for using an external device connecting to the PC.
You can connect and use a keyboard and mouse.
You can play a file from a media device. (Examples of media devices: MP3, digital camera, etc.)
You can run, move, copy or delete the files on the storage device. (Examples of storage
devices: external memory, memory card, memory reader, HDD-type MP3 player, etc.)
You can use other USB devices that can be connected to a computer.
When connecting a device to the [
appropriate to the device.
] port of the monitor, connect the device using a cable
For the purchase of the cable and external devices, ask the service center of the corresponding
product.
The company is not liable for problems or damages to an external device caused by using an
unauthorized cable for the connection.
Some products do not follow the USB standard, and it may cause a malfunction of the device.
If the device malfunctions even if it is connected to the computer, contact the service center of the
device/computer.
2 Connecting and Using a Source Device
52
2
Connecting and Using a Source Device
Changing the sound settings on Windows (S**E450M* Models)
Control Panel
→ Audio → Speaker → Speaker Setup
2 Connecting and Using a Source Device
53
2
Connecting and Using a Source Device
2.2.3 Driver Installation
You can set the optimum resolution and frequency for this product by installing the corresponding
drivers.
An installation driver is contained on the CD supplied with the product.
If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com) and
download the file.
Insert the user manual CD provided with the product into the CD-ROM drive.
Go to Display Properties and check that the resolution and refresh rate are appropriate.
Click "Windows Driver".
Follow the instructions given on the screen to proceed with installation.
Select your product model from the list of models.
Refer to your Windows OS manual for further details.
2 Connecting and Using a Source Device
54
2
Connecting and Using a Source Device
2.2.4 Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the product for the
first time after purchase.
Select a language on the product and change the resolution on your PC to the optimum setting.
6HWXS*XLGH
7KHRSWLPDOUHVROXWLRQIRUWKLV
PRQLWRULVDVIROORZV
****x**** **Hz
8VHWKHDERYHVHWWLQJVWRVHW
WKHUHVROXWLRQRQ\RXU3&
(QJOLVK
2.
AUTO
Press [
] to move to the language you want and press [
].
To hide the information message, press [ MENU ].
If the optimum resolution is not selected, the message will appear up to three times for a specified
time even when the product is turned off and on again.
The optimum resolution can also be selected in Control Panel on your PC.
2 Connecting and Using a Source Device
55
3
Screen Setup
A detailed description of each function is provided. Refer to your product for details.
Configure the screen settings such as brightness.
3.1
Brightness
You can adjust the general brightness of the picture. (Range: 0~100)
A higher value will make the picture appear brighter.
SAMSUNG
This menu is not available when MAGIC
Bright is set to Dynamic Contrast mode.
This menu is not available when Smart Eco Saving is set.
This menu is not available when Eye Saver Mode is enabled.
The functions available on the monitor may vary depending on the model. Refer to the actual
product.
3.1.1 Configuring Brightness
Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display
the corresponding menu screen.
Press [
] to move to PICTURE and press [
Press [
] to move to Brightness and press [
] on the product.
] on the product.
The following screen will appear.
PICTURE
Brightness
100
Adjust the brightness
level. Values closer
to 100 mean a
brighter screen.
Brightness
75
Sharpness
60
Sharpness
60
Eye Saver Mode
Off
Eye Saver Mode
Off
Off
Game Mode
SAMSUNG
MAGIC Bright
SAMSUNG
MAGIC Upscale
SAMSUNG
MAGIC Bright
Custom
SAMSUNG
Off
MAGIC Angle
AUTO
Adjust the Brightness using the [
Contrast
100
Contrast
Game Mode
PICTURE
75
Adjust the brightness
level. Values closer
to 100 mean a
brighter screen.
Off
Custom
Off
AUTO
] buttons.
3 Screen Setup
56
3
3.2
Screen Setup
Contrast
Adjust the contrast between the objects and background. (Range: 0~100)
A higher value will increase the contrast to make the object appear clearer.
SAMSUNG
This menu is not available when MAGIC
Bright is in Cinema or Dynamic Contrast mode.
This menu is not available when Game Mode is enabled.
The functions available on the monitor may vary depending on the model. Refer to the actual
product.
3.2.1 Configuring Contrast
Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display
the corresponding menu screen.
Press [
] to move to PICTURE and press [
Press [
] to move to Contrast and press [
] on the product.
] on the product.
The following screen will appear.
PICTURE
Brightness
100
Adjust the contrast
level. Values closer to
100 mean a bigger
light/dark contrast.
Brightness
100
Contrast
75
Sharpness
60
Sharpness
60
Eye Saver Mode
Off
Eye Saver Mode
Off
Off
Game Mode
Game Mode
SAMSUNG
MAGIC Bright
Contrast
Custom
SAMSUNG
Off
SAMSUNG
SAMSUNG
MAGIC Upscale
MAGIC Bright
MAGIC Angle
AUTO
PICTURE
Adjust the Contrast using the [
75
Adjust the contrast
level. Values closer to
100 mean a bigger
light/dark contrast.
Off
Custom
Off
AUTO
] buttons.
3 Screen Setup
57
3
3.3
Screen Setup
Sharpness
Make the outline of objects more clear or blurry. (Range: 0~100)
A higher value will make the outline of objects clearer.
SAMSUNG
This menu is not available when MAGIC
Bright is in Cinema or Dynamic Contrast mode.
SAMSUNG
This menu is not available when MAGIC
Upscale is in Mode1 or Mode2.
This menu is not available when Game Mode is enabled.
The functions available on the monitor may vary depending on the model. Refer to the actual
product.
3.3.1 Configuring Sharpness
Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display
the corresponding menu screen.
Press [
] to move to PICTURE and press [
Press [
] to move to Sharpness and press [
] on the product.
] on the product.
The following screen will appear.
PICTURE
Brightness
100
Adjust the sharpness
of the picture. Values
closer to 100 mean a
sharper image.
Brightness
Contrast
100
Contrast
75
Sharpness
60
Sharpness
60
Eye Saver Mode
Off
Eye Saver Mode
Off
Off
Game Mode
Game Mode
SAMSUNG
MAGIC Bright
SAMSUNG
MAGIC Upscale
SAMSUNG
MAGIC Bright
Custom
SAMSUNG
Off
MAGIC Angle
AUTO
PICTURE
Adjust the Sharpness using the [
75
Adjust the sharpness
of the picture. Values
closer to 100 mean a
sharper image.
Off
Custom
Off
AUTO
] buttons.
3 Screen Setup
58
3
3.4
Screen Setup
Eye Saver Mode
Set to an optimum picture quality suitable for eye relaxation.
TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for lower
blue light levels. When Eye Saver Mode is 'On', the blue light that wavelength is around 400nm will
become lower and lower, and one hour later it will approach the optimum picture quality suitable for eye
relaxation. At the same time, the blue light level is lower than in the default settings, and it was tested by
TÜV Rheinland and certified as it met the requirements of TÜV Rheinland “Low Blue Light Content”
standards.
The functions available on the monitor may vary depending on the model. Refer to the actual product.
3.4.1 Configuring Eye Saver Mode
Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display
the corresponding menu screen.
Press [
] to move to PICTURE and press [
] on the product.
Press [
] to move to Eye Saver Mode and press [
] on the product.
The following screen will appear.
PICTURE
Brightness
100
Set to an optimum
picture quality suitable
for eye relaxation.
PICTURE
Brightness
100
Contrast
75
Contrast
Sharpness
60
Sharpness
60
Eye Saver Mode
Off
Eye Saver Mode
Off
Game Mode
SAMSUNG
MAGIC Bright
SAMSUNG
MAGIC Upscale
Off
On
75
Game Mode
Off
MAGIC Bright
Off
MAGIC Angle
AUTO
Press [
] to move to the option you want and press [
Off
Custom
SAMSUNG
Off
Off
On
SAMSUNG
Custom
Set to an optimum
picture quality suitable
for eye relaxation.
AUTO
].
The selected option will be applied.
3 Screen Setup
59
3
3.5
Screen Setup
Game Mode
Configure the product screen settings for game mode. Use this feature when playing games on a PC or
when a game console such as PlayStation™ or Xbox™ is connected.
This menu is not available when Eye Saver Mode or Smart Eco Saving is enabled.
The functions available on the monitor may vary depending on the model. Refer to the actual
product.
3.5.1 Configuring Game Mode
Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display
the corresponding menu screen.
Press [
] to move to PICTURE and press [
Press [
] to move to Game Mode and press [
] on the product.
] on the product.
The following screen will appear.
PICTURE
Brightness
100
Optimizes image
settings for playing
games.
PICTURE
Brightness
100
Contrast
75
Contrast
Sharpness
60
Sharpness
60
Eye Saver Mode
Off
Eye Saver Mode
Off
Game Mode
Off
SAMSUNG
On
SAMSUNG
Always On
MAGIC Bright
MAGIC Upscale
75
Off
Game Mode
Custom
Off
Press [
Custom
SAMSUNG
On
SAMSUNG
Always On
MAGIC Bright
MAGIC Angle
AUTO
] to move to the option you want and press [
Optimizes image
settings for playing
games.
Off
AUTO
].
The selected option will be applied.
When the monitor turns off, enters power-saving mode or changes input sources, Game Mode
turns Off even if it is set to On.
If you want to keep Game Mode enabled all the time, select Always On.
3 Screen Setup
60
3
3.6
Screen Setup
SAMSUNG MAGIC Bright
This menu provides an optimum picture quality suitable for the environment where the product will be
used.
This menu is not available when Smart Eco Saving is enabled.
This menu is not available when Game Mode is enabled.
This menu is not available when Eye Saver Mode is enabled.
SAMSUNG
This menu is not available when MAGIC
Angle is enabled.
The functions available on the monitor may vary depending on the model. Refer to the actual
product.
You can customize the brightness to suit your preferences.
3.6.1 Configuring SAMSUNG MAGIC Bright
Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display
the corresponding menu screen.
Press [
] to move to PICTURE and press [
Press [
SAMSUNG
] to move to MAGIC
Bright and press [
] on the product.
] on the product.
The following screen will appear.
PICTURE
Brightness
100
Contrast
75
Sharpness
Custom
Eye Saver Mode
Web mode
Game Mode
Standard
SAMSUNG
Cinema
SAMSUNG
Dynamic Contrast
MAGIC Bright
MAGIC Upscale
Set to an optimum
picture quality suitable
for the working
environment.
PICTURE
100
Brightness
75
Contrast
Set to an optimum
picture quality suitable
for the working
environment.
60
60
Sharpness
50
Eye Saver Mode
50
Game Mode
Custom
Custom
50
Standard
Off
50
2200
SAMSUNG
Cinema
SAMSUNG
Dynamic Contrast Wide
MAGIC Bright
MAGIC Angle
Off
2200
AUTO
AUTO
Custom: Customize the contrast and brightness as required.
Web mode: Obtain the best screen for editing documents and browsing the Internet without
the issue of narrow viewing angles. (S19E200NY, S22E200NY)
Standard: Obtain a picture quality suitable for editing documents or using Internet.
Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD
content.
Dynamic Contrast: Obtain balanced brightness through automatic contrast adjustment.
Press [
] to move to the option you want and press [
].
The selected option will be applied.
3 Screen Setup
61
3
3.7
Screen Setup
SAMSUNG MAGIC Angle (Except S19E200NY /
S22E200NY)
SAMSUNG
MAGICAngle
allows you to configure the settings to obtain the optimum picture quality according to your
viewing angle.
SAMSUNG
This menu is not available when MAGIC
Bright is in Cinema or Dynamic Contrast mode.
This menu is not available when Game Mode, Eye Saver Mode or Smart Eco Saving is enabled.
The functions available on the monitor may vary depending on the model. Refer to the actual
product.
You can customize the angle to suit your preferences.
3.7.1 Configuring SAMSUNG MAGIC Angle
Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display
the corresponding menu screen.
Press [
] to move to PICTURE and press [
Press [
SAMSUNG
] to move to MAGIC
Angle and press [
] on the product.
] on the product.
The following screen will appear.
PICTURE
100
Brightness
Select an angle that
best suits your
viewing position.
75
Contrast
off
60
Lean Back ModeCustom
1 50
Sharpness
Eye Saver Mode
SAMSUNG
Lean Back Mode 2 Off
50
Standing Mode
Off
2200
SAMSUNG
Side Mode
Game Mode
MAGIC Bright
MAGIC Angle
Wide
AUTO
① : Select this option to view directly in front of the product.
Off
Lean Back Mode 1
② : Select this option to view from a place slightly lower than the product.
Lean Back Mode 2
③ : Select this option to view from a place lower than Lean Back Mode 1.
Standing Mode
Side Mode
Group View: Select this option for more than one viewer to view from places
④ : Select this option to view from a place higher than the product.
⑤ : Select this option to view from either side of the product.
① , ④ , and ⑤ .
3 Screen Setup
62
3
Screen Setup
Custom: Lean Back Mode 1 will be applied by default if Custom is selected.
Press [
] to move to the option you want and press [
].
The selected option will be applied.
3 Screen Setup
63
3
3.8
Screen Setup
SAMSUNG MAGIC Upscale
SAMSUNG
MAGICUpscale
function can enhance the layers of the picture details and the vividness of the picture.
The function has more obvious effects on low-resolution pictures.
SAMSUNG
This menu is not available when MAGIC
Bright is in Cinema or Dynamic Contrast mode.
This menu is not available when Game Mode is enabled.
The functions available on the monitor may vary depending on the model. Refer to the actual
product.
3.8.1 Configuring SAMSUNG MAGIC Upscale
Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display
the corresponding menu screen.
Press [
] to move to PICTURE and press [
Press [
SAMSUNG
] to move to MAGIC
Upscale and press [
] on the product.
] on the product. The following screen
will appear.
PICTURE
100
Brightness
Enhance picture
detail and vividness.
PICTURE
SAMSUNG
MAGIC Upscale
off
Contrast
75
Image Size
Mode1
Sharpness
60
H-Position
Mode2
Custom
50
V-Position
Eye Saver Mode
Game Mode
SAMSUNG
MAGIC Bright
SAMSUNG
MAGIC Upscale
off
Mode1
Mode2
Off
50
Coarse
Off
2200
Enhance picture
detail and vividness.
2200
Fine
Wide
AUTO
AUTO
Comparing with Mode1, Mode2 has a stronger effect.
Press [
] to move to the option you want and press [
].
The selected option will be applied.
3 Screen Setup
64
3
3.9
Screen Setup
Image Size (Except S19E200BR / S19E450BR /
S19E450MR)
Change the picture size.
The functions available on the monitor may vary depending on the model. Refer to the actual product.
3.9.1 Changing the Image Size
Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display
the corresponding menu screen.
Press [
] to move to PICTURE and press [
Press [
] to move to Image Size and press [
] on the product.
] on the product. The following screen will
appear.
In PC mode
PICTURE
Image Size
Auto
H-Position
Wide
Choose the size and
aspect ratio of the
picture displayed on
screen.
V-Position
Coarse
2200
Fine
PICTURE
Choose the size and
aspect ratio of the
picture displayed on
screen.
SAMSUNG
MAGIC Upscale
Image Size
Auto
H-Position
Wide
V-Position
Coarse
2200
Fine
AUTO
AUTO
Auto: Display the picture according to the aspect ratio of the input source.
Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
In AV mode
PICTURE
SAMSUNG
MAGIC Upscale
Image Size
H-Position
V-Position
4:3
Choose the size and
aspect ratio of the
picture displayed on
screen.
16:9
PICTURE
MAGIC Upscale
Image Size
H-Position
Screen Fit
Choose the size and
aspect ratio of the
picture displayed on
screen.
SAMSUNG
V-Position
Coarse
Coarse
Fine
Fine
4:3
Wide
Screen Fit
AUTO
AUTO
4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
16:9: Display the picture with an aspect ratio of 16:9.
Screen Fit: Display the picture with the original aspect ratio without cutting off.
Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
(S19E200NW, S19E200BW, S22E200BW, S19E450BW, S19E450MW, S22E450BW,
S22E450MW, S22E450DW)
3 Screen Setup
65
3
Screen Setup
Changing the screen size is available when the following conditions are satisfied.
A digital output device is connected using the DVI/DP cable.
The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (not every
model can support all of these signals).
This can only be set when the external input is connected through DVI and PC/AV Mode is
set to AV.
Press [
] to move to the option you want and press [
].
The selected option will be applied.
3 Screen Setup
66
3
Screen Setup
3.10 H-Position & V-Position
H-Position: Move the screen to the left or right.
V-Position: Move the screen up or down.
This menu is available in Analog mode.
This menu is only available when Image Size is set to Screen Fit in AV Mode. When a 480P or
576P or 720P or 1080P signal is input in AV mode and the monitor can display normally ,select
Screen Fit to adjust horizontal position in 0-6 levels.
The functions available on the monitor may vary depending on the model. Refer to the actual
product.
3.10.1 Configuring H-Position & V-Position
Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display
the corresponding menu screen.
Press [
] to move to PICTURE and press [
] on the product.
Press [
] to move to H-Position or V-Position, and press [
]. The following screen will
appear.
PICTURE
Image Size
PICTURE
Wide
H-Position
50
V-Position
50
Coarse
Fine
Move the image
displayed on the
screen to the
left or right.
Image Size
H-Position
V-Position
2200
Coarse
Fine
Wide
50
50
2200
AUTO
PICTURE
SAMSUNG
MAGIC Upscale
Image Size
Off
Wide
Move the image
displayed on the
screen to the
left or right.
PICTURE
SAMSUNG
MAGIC Upscale
Image Size
50
H-Position
V-Position
50
V-Position
Fine
Coarse
2200
Fine
AUTO
AUTO
H-Position
Coarse
Press [
Move the image
displayed on the
screen up or down.
Off
Move the image
displayed on the
screen up or down.
Wide
50
50
2200
AUTO
] to configure H-Position or V-Position.
3 Screen Setup
67
3
Screen Setup
3.11 Coarse
Adjust the screen frequency.
This menu is available in Analog mode only.
The functions available on the monitor may vary depending on the model. Refer to the actual
product.
3.11.1 Adjusting Coarse
Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display
the corresponding menu screen.
Press [
] to move to PICTURE and press [
Press [
] to move to Coarse and press [
] on the product.
] on the product. The following screen will
appear.
PICTURE
Image Size
PICTURE
Wide
Adjust the screen
frequency.
SAMSUNG
MAGIC Upscale
H-Position
50
Image Size
V-Position
50
H-Position
2200
V-Position
Coarse
Fine
Coarse
Fine
AUTO
Adjust the Coarse using the [
Off
Adjust the screen
frequency.
Wide
50
50
2200
AUTO
] buttons.
3 Screen Setup
68
3
Screen Setup
3.12 Fine
Fine-adjust the screen to obtain a vivid picture.
This menu is available in Analog mode only.
The functions available on the monitor may vary depending on the model. Refer to the actual
product.
3.12.1 Adjusting Fine
Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display
the corresponding menu screen.
Press [
] to move to PICTURE and press [
Press [
] to move to Fine and press [
PICTURE
Image Size
] on the product.
] on the product. The following screen will appear.
PICTURE
Wide
Fine-tune the
screen
to get a vivid
picture.
SAMSUNG
MAGIC Upscale
Image Size
H-Position
50
V-Position
50
H-Position
2200
V-Position
Coarse
Fine
Coarse
Fine
AUTO
Adjust the Fine using the [
Off
Wide
Fine-tune the
screen
to get a vivid
picture.
50
50
2200
AUTO
] buttons.
3 Screen Setup
69
4
Configuring Tint
A detailed description of each function is provided. Refer to your product for details.
SAMSUNG
Adjust the tint of the screen. This menu is not available when MAGIC
Bright is in Cinema or
Web mode, Dynamic Contrast mode. This menu is not available when Game Mode or Eye
Saver Mode is enabled.
4.1
Red
Adjust the value of the color red in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
4.1.1 Configuring Red
Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display
the corresponding menu screen.
Press [
] to move to COLOR and press [
Press [
] to move to Red and press [
] on the product.
] on the product.
The following screen will appear.
COLOR
Red
50
Green
50
Adjust the red
saturation level.
Values closer to 100
mean greater
intensity for the color.
50
Blue
Color Tone
Normal
Gamma
Mode1
AUTO
Adjust the Red using the [
] buttons.
4 Configuring Tint
70
4
4.2
Configuring Tint
Green
Adjust the value of the color green in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
4.2.1 Configuring Green
Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display
the corresponding menu screen.
Press [
] to move to COLOR and press [
Press [
] to move to Green and press [
] on the product.
] on the product.
The following screen will appear.
COLOR
Red
50
Green
50
Blue
Adjust the green
saturation level.
Values closer to 100
mean greater
intensity for the color.
50
Color Tone
Normal
Gamma
Mode1
AUTO
Adjust the Green using the [
] buttons.
4 Configuring Tint
71
4
4.3
Configuring Tint
Blue
Adjust the value of the color blue in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
4.3.1 Configuring Blue
Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display
the corresponding menu screen.
Press [
] to move to COLOR and press [
Press [
] to move to Blue and press [
] on the product.
] on the product.
The following screen will appear.
COLOR
Red
50
Green
50
Adjust the blue
saturation level.
Values closer to 100
mean greater
intensity for the color.
50
Blue
Color Tone
Normal
Gamma
Mode1
AUTO
Adjust the Blue using the [
] buttons.
4 Configuring Tint
72
4
4.4
Configuring Tint
Color Tone
Adjust the general color tone of the picture.
SAMSUNG
This menu is not available when MAGIC
Angle is enabled.
4.4.1 Configuring the Color Tone Settings
Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display
the corresponding menu screen.
Press [
] to move to COLOR and press [
Press [
] to move to Color Tone and press [
] on the product.
] on the product.
The following screen will appear.
COLOR
50
Red
Green
Blue
Color Tone
Gamma
Select a color tone
that best suits your
viewing needs.
Cool 2
Cool 1
Normal
Warm 1
Warm 2
AUTO
Cool 2: Set the color temperature to be cooler than Cool 1.
Cool 1: Set the color temperature to be cooler than Normal mode.
Normal: Display the standard colour tone.
Warm 1: Set the color temperature to be warmer than Normal mode.
Warm 2: Set the color temperature to be warmer than Warm 1.
Custom : Customize the color tone.
Press [
] to move to the option you want and press [
].
The selected option will be applied.
4 Configuring Tint
73
4
4.5
Configuring Tint
Gamma
Adjust the mid-range brightness (Gamma) of the picture.
SAMSUNG
This menu is not available when MAGIC
Angle is enabled.
4.5.1 Configuring Gamma
Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display
the corresponding menu screen.
Press [
] to move to COLOR and press [
] on the product.
Press [
] to move to Gamma and press [
] on the product.
The following screen will appear.
COLOR
Red
50
Green
50
Blue
50
Color Tone
Gamma
Adjust the middle level
of luminance.
Normal
Mode1
Mode1
Mode2
Mode3
AUTO
Press [
] to move to the option you want and press [
].
The selected option will be applied.
4 Configuring Tint
74
5
5.1
Resizing or Relocating the Screen
A detailed description of each function is provided. Refer to your product for details.
Language
Set the menu language.
A change to the language setting will only be applied to the onscreen menu display.
It will not be applied to other functions on your PC.
5.1.1 Changing the Language
Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display
the corresponding menu screen.
Press [
] to move to MENU SETTINGS and press [
Press [
] to move to Language and press [
] on the product.
] on the product.
The following screen will appear.
MENU SETTINGS
Language
Deutsch
Menu H-Position
English
Menu V-Position
Español
Display Time
Français
Transparency
Set the menu
language.
Italiano
AUTO
Press [
] to move to the language you want and press [
].
The selected option will be applied.
5 Resizing or Relocating the Screen
75
5
5.2
Resizing or Relocating the Screen
Menu H-Position & Menu V-Position
Menu H-Position: Move the menu position to the left or right.
Menu V-Position: Move the menu position up or down.
5.2.1 Configuring Menu H-Position & Menu V-Position
Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display
the corresponding menu screen.
Press [
] to move to MENU SETTINGS and press [
] on the product.
Press [
] to move to Menu H-Position or Menu V-Position, and press [
].
The following screen will appear.
MENU SETTINGS
Language
English
Move the menu
position to the left or
right.
MENU SETTINGS
Language
Menu H-Position
100
Menu H-Position
Menu V-Position
Menu V-Position
Display Time
Transparency
Display Time
20 sec
Transparency
On
AUTO
Press [
English
Move the menu
position up or down.
100
20 sec
On
AUTO
] to configure Menu H-Position or Menu V-Position.
5 Resizing or Relocating the Screen
76
5
5.3
Resizing or Relocating the Screen
Display Time
Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified
period of time.
Display Time can be used to specify the time after which you want the OSD menu to disappear.
5.3.1 Configuring Display Time
Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display
the corresponding menu screen.
Press [
] to move to MENU SETTINGS and press [
Press [
] to move to Display Time and press [
] on the product.
] on the product.
The following screen will appear.
MENU SETTINGS
English
Language
100
Menu H-Position
Menu V-Position
Display Time
Transparency
5 sec
10 sec
Set how long the menu
window will remain on
screen for when it is
not in use.
20 sec
On
20 sec
200 sec
AUTO
Press [
] to move to the option you want and press [
].
The selected option will be applied.
5 Resizing or Relocating the Screen
77
5
5.4
Resizing or Relocating the Screen
Transparency
Set the transparency for the menu windows.
5.4.1 Changing Transparency
Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display
the corresponding menu screen.
Press [
] to move to MENU SETTINGS and press [
Press [
] to move to Transparency and press [
] on the product.
] on the product.
The following screen will appear.
MENU SETTINGS
English
Language
Configure the
transparency of the
menu windows.
100
Menu H-Position
Menu V-Position
20 sec
Display Time
Off
On
Transparency
On
AUTO
Press [
] to move to the option you want and press [
].
The selected option will be applied.
5 Resizing or Relocating the Screen
78
6
6.1
Setup and Reset
A detailed description of each function is provided. Refer to your product for details.
Reset All
Return all the settings for the product to the default factory settings.
The functions available on the monitor may vary depending on the model. Refer to the actual product.
6.1.1 Initializing Settings (Reset All)
Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display
the corresponding menu screen.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Reset All and press [
] on the product.
] on the product.
The following screen will appear.
SETUP&RESET
Reset All
Smart Eco Saving
Off
SETUP&RESET
Return all the
settings for the
product to the
default factory
settings.
Reset All
Smart Eco Saving
Off Timer Plus
Off
Return all the
settings for the
product to the
default factory
settings.
Off Timer Plus
Key Repeat Time
Acceleration
PC/AV Mode
Key Repeat Time
Acceleration
Source Detection
Auto
AUTO
AUTO
$OOWKHPHQXVHWWLQJVZLOOEHUHVHW
WRGHIDXOW
$UH\RXVXUH\RXZDQWWRUHVHW"
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.6
Linearized : Yes
Create Date : 2015:04:09 16:15:45+09:00
Modify Date : 2015:04:15 16:28:57+08:00
Has XFA : No
Tagged PDF : Yes
XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date : 2015:04:15 16:28:57+08:00
Format : application/pdf
Document ID : uuid:da501b36-e442-48f7-affd-e74afee31af0
Instance ID : uuid:a48306d6-79fd-4fbe-b684-77440b0dabd8
Page Layout : OneColumn
Page Mode : UseOutlines
Page Count : 143
EXIF Metadata provided by EXIF.tools