Samsung Electronics Co SCHA399 Single-Mode Cellular CDMA Phone User Manual attachments

Download:
Mirror Download [FCC.gov]
Document ID	166272
Application ID	ZZwT9VRwNpFs9rfnuk3lMw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	111.82kB (1397752 bits)
Date Submitted	2001-08-24 00:00:00
Date Available	2001-10-16 00:00:00
Creation Date	2001-08-23 17:26:21
Producing Software	Acrobat PDFWriter 3.02 for Windows
Document Lastmod	2001-08-23 17:26:49
Document Title	attachments.PDF
Document Creator	Microsoft Word
Document Author:	Unknown

ATTACHMENT M – USER’S MANUAL
© 2001 PCTEST Lab
CONFIDENTIAL
8. USERS MANUAL
SCH-A399 (CDMA 800MHz)
JUNE 29 , 2001
FCC RF EXPOSURE INFORMATION
In August 1996 the Federal Communications Commission (FCC)
of the United States with its action in Report and Order FCC
96-326 adopted an updated safety standard for human
exposure to radio frequency electromagnetic energy emitted by
FCC regulated transmitters.Those guidelines are consistent
with the safety standard previously set by both U.S. and
international standards bodies. The design of this phone
complies with the FCC guidelines and these international
standards.
Use only the supplied or an approved antenna. Unauthorized
antennas, modifications, or attachments could impair call
quality, damage the phone, or result in violation of FCC
regulations.
Do not use the phone with a damaged antenna. If a damaged
antenna comes into contact with the skin, a minor burn may
result. Please contact your local dealer for replacement
antenna.
Body-worn Operation
This device was tested for typical body-worn operations using
the optional belt-clip/holster placed 1.5cm from the
body. To comply with FCC RF exposure requirements, a
minimum separation distance of 1.5cm must be
maintained between the user’s body and the phone, including
the antenna, whether extended or retracted. The use of thirdparty belt-clips/ holsters with no metallic components that
provide the minimum separation distance of 1.5cm
can be used to satisfy FCC RF exposure requirements. The use
of non-tested accessories or other body-worn operations may
not comply with FCC RF exposure requirements and should be
avoided. Contact your local dealer for optional accessory items.
Vehicle Mounted External Antenna (optional, if
available.)
A minimum separation distance of 7.9 inches (20cm) must be
maintained Between a person and the vehicle mounted
external antenna to satisfy FCC RF exposure requirements.
Table of Contents
SAFETY PRECAUTIONS ............................................................. 7
UNPACKING ............................................................................... 9
YOUR PHONE
Phone Layout ..............................................................................
Display .......................................................................................
Backlight ....................................................................................
Service Light ...............................................................................
10
13
15
15
GETTING STARTED
Installing the UIM Card ................................................................. 16
Charging a Battery ...................................................................... 18
Switching the Phone On/Off ........................................................ 22
Changing the Display for Standby Mode ...................................... 23
CHV Code .................................................................................... 24
Your Phone’s Mode ....................................................................... 24
CALL FUNCTIONS
Making a Call ............................................................................... 26
Redialing the Last Number ............................................................ 27
Making a Call from the Phonebook ............................................... 28
Prepending Dialing ....................................................................... 28
Speed Dialing ............................................................................... 29
Emergency Dialing ........................................................................ 30
Pause Dialing ............................................................................... 31
Voice Dialing ................................................................................ 34
Adjusting the Volume..................................................................... 35
Answering a Call ........................................................................... 36
In-Call Options .............................................................................. 37
Quick-switching to Silent Mode ...................................................... 38
Viewing Missed Calls ..................................................................... 38
Call Waiting .................................................................................. 39
Call Forwarding ............................................................................ 39
Three-Way Calling ........................................................................ 40
For more information about RF exposure, please visit the FCC
website at www.fcc.gov.
ENTERING TEXT
Changing Text Input Mode ...........................................................
Chinese PY(Pinyin) Mode .............................................................
Chinese Stroke Mode ...................................................................
Word Mode .................................................................................
ABC Mode ...................................................................................
Symbol Mode ..............................................................................
123 Mode ...................................................................................
SOUNDS
42
43
48
51
53
55
55
Ringer Volume (MENU 5-1) ....................................................
Ringer Type (MENU 5-2) ........................................................
Key Beep (MENU 5-3) ...........................................................
Alerts (MENU 5-4) .................................................................
Voice Volume (MENU 5-5) ......................................................
Roam Ringer (MENU 5-7) ......................................................
Power on/off (MENU 5-6) .....................................................
USING THE MENUS
DISPLAY
Accessing a Menu Functions by Scrolling ....................................... 56
Accessing a Menu Functions by Using its Shortcut .......................... 57
List of Menu Functions ................................................................. 58
Backlight (MENU 6-1) ............................................................
Banner (MENU 6-2) ...............................................................
Animation (MENU 6-3) ...........................................................
My Phone Number (MENU 6-4) ..............................................
Language (MENU 6-5) ...........................................................
Set Time (MENU 6-6) .............................................................
Auto Hyphenation (MENU 6-7) ...............................................
LCD Contrast (MENU 6-8) .......................................................
Version (MENU 6-9) ...............................................................
CALLS
Outgoing (MENU 1-1) ............................................................
Incoming (MENU 1-2) ............................................................
Missed (MENU 1-3) ................................................................
Erase Logs (MENU 1-4)............................................................
Air Time (MENU 1-5)...............................................................
62
63
63
63
64
PHONE BOOK
Find Name (MENU 2-1) ......................................................... 65
Add Entry (MENU 2-2) ........................................................... 66
Find Entry (MENU 2-3) .......................................................... 70
Relation Search (MENU 2-4) .................................................. 70
Add email (MENU 2-5) ........................................................... 71
GAMES ......................................................................... 72
82
83
83
84
85
85
85
86
87
87
88
88
89
90
90
90
VOICE DIAL
Record (MENU 7-1) ...............................................................
Play/Erase (MENU 7-2) .........................................................
Set Active (MENU 7-3) ...........................................................
Training (MENU 7-4) .............................................................
Undo Train (MENU 7-5) .........................................................
91
92
93
94
95
VOICE RECORD
Voice Memo (MENU 8-1) ....................................................... 96
Call Answer (MENU 8-2) ........................................................ 98
Scheduler
Today (MENU 4-1) .................................................................
View Month (MENU 4-2) ........................................................
Date (MENU 4-3) ..................................................................
To Do List (MENU 4-4) ...........................................................
Countdown (MENU 4-5) .........................................................
World Time (MENU 4-6) ........................................................
Calculate (MENU 4-7) ............................................................
Alarm Set (MENU 4-8) ...........................................................
73
75
76
76
77
79
80
81
SETUP
Auto Retry (MENU 9-1) .......................................................
Auto Answer (MENU 9-2) .....................................................
Answer Mode (MENU 9-3) ...................................................
Tone Length (MENU 9-4) .....................................................
Set NAM (MENU 9-5) ...........................................................
Roam Option (MENU 9-6) ....................................................
Data/Fax (MENU 9-7) .........................................................
Whisper Mode (MENU 9-8) ..................................................
Security (MENU 9-9) ...........................................................
R-UIM Setup (MENU 9-0) .....................................................
103
103
104
104
105
105
107
108
109
114
MESSAGES
New Messages (OK-1)..............................................................
Inbox (OK-2)...........................................................................
Outbox(OK-3) .........................................................................
MSG Setup (OK-4) ...................................................................
115
118
121
122
WEB
Launching the Web Browser ....................................................... 125
Setting the Web Prompt ............................................................. 130
REFERENCE INFORMATION
Using the Batteries ..................................................................... 131
Safety Information ..................................................................... 133
GLOSSARY .................................................................. 140
INDEX......................................................................... 132
Safety Precautions
Read these simple guidelines. Failure to comply with
them may be dangerous or illegal. For more detailed
safety information, see “Safety Information” on page
xx.
Road safety comes first
Do not use a hand-held phone while driving; park the
vehicle first. Remember that in some countries, it is
illegal to use a hand-held phone while driving.
Switch off when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in aircraft
Wireless phones can cause interference. Using them
on aircraft is both illegal and dangerous.
Switch off in hospital
Follow any regulations or rules. Switch phone off
near medical equipment.
Respect special regulations
Follow any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
Interference
All wireless phones may be subject to radio
interference, which may affect their performance.
Safety Precautions
Unpacking
Use qualified service
Only qualified service personnel must repair
equipment.
Your package contains the following items.
Use sensibly
Use only in the normal position (to ear). Do not touch
the antenna unnecessarily when the phone is
switched on.
ve
Tentati
Emergency calls
Ensure the phone is switched on and in service.
Enter the emergency number (911 or another official
emergency number) and press
. Give your
location. Do not end the call until told to do so.
Non-Ionizing Radiation
No part of the human body is allowed to come too
close to the antenna during operation of the
equipment.
IMPORTANT! Use only SAMSUNG-approved
accessories and batteries. This phone is intended for
use with a SAMSUNG-approved:
The use of any other power accessory will invalidate
any approval or warranty applying to the phone, and
may be dangerous.
When you disconnect the power cord of any
accessory, grasp and pull the connector, not the cord.
Travel Adapter
Phone
Standard
Battery
Owner’s
Manual
Hand Strap
In addition, you can obtain the following accessories
for your phone from your local SAMSUNG dealer:
•
•
•
•
Ear microphone
Travel adapter
Standard , Extended Li-Ion batteries
Data cable
Your Phone
Your Phone
With the phone closed
Phone Layout
Antenna
The following illustration shows the main elements
of your phone.
Earphone jack
Service Light
External LCD
With the phone open
Key
Earpiece
Functions
Enters the menu facility.
Display
In the menu facility, selects a menu function
or stores information that you have entered.
In Standby mode, quickly enters the
Messages menu.
In the menu facility, scrolls through the
menu options.
In Standby mode,
allows you to find
the Phonebook entry by its location and
by its name. And
and
allow you to change the item to display on
the Standby mode.
Volume keys
During a call, adjusts the
voice volume.
In Standby mode with the
phone open, adjusts the
call ringer volume.
In Standby mode with the
phone closed, backlights
the external LCD.
10
In Standby mode, quickly enters the Web
menu. Pressing and holding down this key
starts the web browser.
Microphone
11
Your Phone
Your Phone
Display
Key
Functions (continued...)
Makes or answers a call.
In Standby mode, recalls the last number
dialed.
The display comprises two areas: an upper line of
static icons, and the lower text and graphic area. The
following icons display at power-on:
Icons
Ends a call. Also switches the phone on and
off when pressed and held.
In the menu facility, returns to Standby
mode and cancels your input.
Text and graphic area
Deletes characters from the display.
In the menu facility, returns to the previous
menu level.
Enters numbers, letters and some special
characters.
Use these keys for the various functions.
In the text input mode, changes the case
and
inserts a space.
Icons
Signal strength : Shows the received
signal strength. The greater the number of
bars, the better the signal strength.
Service: Appears when a call is in
progress.
No Service: Appears when you are outside
a service area. With it displayed, you cannot
make or receive calls. Wait a little while for
a better signal or move into an open area to
regain the service.
Roaming: Appears when you are out of
your home area and have registered with a
different network (when travelling in other
countries, for example).
12
13
Your Phone
Icons (continued...)
New Message: Indicates that there is a
new message waiting to be checked.
Analog mode: Indicates that the phone is
operating in Analog mode.
Your Phone
Backlight
The display and keypad are illuminated by a
backlight. When you press any key, the backlight
illuminates. It turns off if no key is pressed within a
given period of time, depending on the Backlight
option set in the Display menu.
Digital mode: Indicates that the phone is
operating in Digital mode.
Vibration mode: Appears when the ring
volume for calls is set to Vibrate.
To specify the length of time the phone waits before
the backlight turns off, set the Backlight menu
option (6-1); see page xx for further details.
Battery status: Shows the level of your
battery. The more bars you see, the more
power you have left.
Service light
External LCD
Your phone has an external LCD display on the cover.
When the phone is closed, it indicates that you have
an incoming call or message and notifies you at the
specified time when you have set an alarm by its
backlight or particular icons on it.
The service light is in the top right-hand of the
phone. It flashes to indicate incoming call or
message. Also, the service light flashes for a few
seconds when you turn on the phone.
Service light
When you press one of the volume keys on the left
side of the phone with the phone closed, the
backlight of the external display illuminates.
14
15
Getting Started
Getting Started
Installing the UIM Card
3. Slide the ivory lock in the UIM card holder towards
the bottom of the phone to unlock the UIM card
holder and lift it up.
When you subscribe to a network, your are provided
with a plug-in UIM card loaded with your
subscription details (CHV code, available optional
service and so on).
Important! The plug-in UIM card and its contacts
can be easily damaged by scratches or
bending, so be careful when handling,
inserting or removing the card.
Keep all UIM cards out of the reach of
small children.
1. If necessary, switch off the phone by holding
down
until the power-off animation begins
playing.
4. Insert the UIM card ensuring that the cut corner is
at the top left and the gold contacts of the card
face into the phone. Replace the card holder.
➁
➀
2. Remove the battery. To do so:
➀ Press and hold the catch above the battery on
the back of the phone.
➁ Slide the battery toward the bottom of the
phone and take it away.
➀
5. Slide the ivory lock toward the top of the phone to
lock the card holder.
➁
16
17
Getting Started
Getting Started
6. Reinstall the battery. To do so:
➀ Place the battery so that the tabs on it align to
the notches on the back of the phone.
Note: You must fully charge the battery before using
your phone for the first time. The phone can be used
while the battery is charging.
Using a Travel Adapter
1. With the battery in position on the phone, connect
the lead from the travel adapter to the jack at the
bottom of the phone.
➁ Slide the battery toward the top of the phone
until you hear a click.
2. Connect the adapter to a standard AC wall outlet.
Charging a Battery
Tentativ
3. When charging is finished, disconnect the adapter
from the power outlet and from the phone.
Your phone is powered by a rechargeable Li-ion
battery.
A travel adapter is provided with your phone. You can
also purchase it from your local SAMSUNG dealer.
Use only approved batteries and chargers.
Ask you local SAMSUNG dealer for further details.
18
➀
➁
➀
19
Getting Started
Low Battery Indicator
When the battery charge level gets low, the battery
sensor blinks an empty battery icon
at the top
right corner of the display and sounds a tone.
Empty battery
icon
If the battery level gets too low, the phone will turn
off automatically. Unfortunately, if this happen, you’ll
lose whatever you are doing, including dropping your
call. Watch the battery strength icon and make sure
your battery is adequately charged.
20
21
Getting Started
Getting Started
Switching the Phone On/Off
1. Open the phone.
2. Hold down
for more than one second to
switch the phone on.
3. If the phone asks for a CHV code, enter the CHV
code supplied with the UIM card. For further
information on the CHV code, see page xx.
The service light in the top right corner of the
phone flashes, and an alert sounds. When the
system locates services, you can see the following
idle screens on the main and external display
respectively.
12:20 AM
06/20 M0
WARNING!
Do not switch on the phone when the mobile
phone use is prohibited or when it may cause
interference or danger.
Note: Do not touch the antenna on the phone
unnecessarily when the phone is switched on.
Contact with the antenna affects call quality and
may cause the phone to operate at a higher power
level than otherwise needed.
Changing the Display for Standby
Mode
Your phone provides you with a variety of items to
display in Standby mode. You can change the idle
screen with ease to one of the following items
depending on your preference.
• Clock and calendar: displays a clock with with a
daily pad calendar. This is default display.
If the phone is out of service, the
icon
appears in the display. In this case, you cannot
place and receive calls. You can try again later
when service is available.
Note: You can change the display language via
the Language menu option (6-5).
3. When you wish to switch the phone off, hold
down
for more than two seconds.
22
• World clock: displays two clocks showing the time
in the time zones selected in the World Time
menu option (see page xx).
• Digital clock: displays the digital clock.
• Wallpaper 1 and 2: displays the wallpaper
animations selected in Idle 1 and Idle 2 under the
Animation menu option (see page xx)
respectively.
To change the display in Standby mode, press
until you find the desired display.
or
23
Getting Started
CHV Code
The CHV code supplied with the UIM card helps you
protect the UIM card against unauthorized use.
When requested the code, key in the appropriate
code (displayed as asterisks for security). If you enter
an incorrect CHV code three times in succession,
your UIM card is blocked. To unblock the card,
contact your service provider.
You can enable or disable the code using the R-UIM
Setup menu option (9-0). For further information on
the CHV code, see page xx.
Your Phone’s Mode
Standby Mode
Standby is the most basic state of your phone. The
phone goes into Standby mode soon after you turn it
on, or whenever you briefly press
. When your
phone is in Standby mode, you will typically see the
current date and time. If you enter a phone number,
you can press
to dial it, or press
to save it
in the internal phone book.
Press
at any time to return to Standby mode. Be
careful; if you are on a call when you press
, you
will return to Standby mode, but it also disconnects
the call. Press
several times or hold it down to
return to Standby mode without ending the call.
24
Getting Started
Talk Mode
You can place and answer calls only when your phone
is turned on. During a call, the phone is in Talk mode.
While you are in Talk mode, pressing
gives you a
list of options referred to as “In-Call Options.” See
page xx for details on the options.
Power Save Mode
Your phone comes with a Power Save feature that will
automatically be activated if your phone is unable to
find a signal after 15 minutes of searching. While this
feature is active, the phone’s battery charge will
conserved. The phone will automatically recheck for a
signal periodically.
To manually force the phone recheck for a signal, press
any key. A message on the display let you know when
your phone is operating in Power Save Mode.
Lock Mode
When you lock your phone using the Lock Mode
menu option (see page xx), you cannot use the phone.
Even in Lock mode, you can receive messages and
calls, but cannot place an outgoing call until you
unlock the phone.
To unlock the phone, press , and enter the lock
code. The phone returns to Standby mode.
25
Call Functions
Call Functions
Ending a Call
When you have finished your call, press
Making a Call
To make a call, proceed the followings:
1. In Standby mode, enter the area code and phone
number.
While entering a phone number, press
to
insert a hard or two-second pause or a
hyphenation. For more information on pause
dialing, see page xx.
2. Press
. The phone places the call to the
entered phone number.
Note: If you have set Auto Retry menu option (9-1) to
On (see page xx), and nobody answers to you or the
line is busy, the phone automatically retries to make
the call.
The call time (length of the call) displays with the
number of the called party. If the number is stored in
your Phonebook, the name is displayed. If there is no
match in Phonebook, you can press
and store the
number to the Phonebook. For further information on
storing the number in the Phonebook, see page xx.
Or, simply close the phone to end a call.
Redialing the Last Number
To redial the number you dialed last, press
twice.
The phone stores the last 10 numbers dialed so that
you search for the desired number in the last call log.
To recall any of these numbers, proceed as follows.
1. If there are any characters on the display, return to
Standby mode by pressing
Correcting the Number
To clear...
Then...
The last digit
displayed
Press
The whole display
Hold down
one second.
2. Press
. The list of outgoing calls are
displayed.
for more than
3. Press
or
(or the volume keys on the left
side of the phone) to scan through the list until
you find the required name or number.
4. Press
26
to dial the displayed number.
27
Call Functions
Call Functions
Making a Call from the Phonebook
Speed Dialing
You can store the phone numbers called regularly in
memory, called Phonebook. You then simply recall
the number to dial. For further information on
Phonebook, refer to page xx.
Once you have stored phone numbers labeled with
Speed Dial in the phonebook memory, you can dial
them easily whenever you want. See below.
One-Touch Dial
Prepend Dialing
The Prepend option lets you add digits such as area
codes and network feature activation codes to a
phone number that is in your Phonebook or Call logs
before dialing it. (The prepended phone number
cannot be more than 10 digits.)
To prepend existing phone numbers in the Phonebook
or Call logs:
1. Access the Phonebook entry.
Memory locations 01 through 09 are special onetouch locations. You can dial the phone numbers
stored in the Phonebook memory from 01 through 09
simply by pressing one button.
Press and hold the third digit of the memory location
containing the number to be dialed.
For example: Location no. 009
Press
and hold.
The number (and name) stored is displayed, then
dialed.
2. When the desired phone number displays, press
to access the Options menu.
Two-Touch Dial
3. Press
Memory locations 10 through 99 are special twotouch locations.
to select the Prepend option.
4. Enter the area code or feature code.
5. Press
to dial the number.
Press the second digit briefly, then hold down the
third digit of the memory cell.
For example: Location no. 023
Press
briefly and hold down
The number (and name) stored is displayed, then
dialed.
28
29
Call Functions
Call Functions
Pause Dialing
Three-Touch Dial
Memory locations 100 through 500 are special threetouch locations.
Press the first and the second digit briefly, then hold
down the third digit of the memory cell.
For example: Location no. 123
Press
and
down
briefly, then hold
When you call automated system, like banking
services, you are often required to enter a password
or account number. Instead of manually entering the
numbers each time, you can store the numbers in
your Phonebook, separated by special characters
called pauses.
There are two kinds of pauses that can be entered on
your phone:
The number (and name) stored is displayed, then
dialed.
• Hard pause: A hard pause stops the dialing
sequence until you press
Emergency Dialing
• Two second pause: A two second pause stops the
dialing sequence for two seconds and then
automatically sends the remaining digits.
You can place calls to hard-coded emergency
numbers (911, *911, and #911) or three specified
number in the emergency number list even if your
phone is locked or all outgoing calls are restricted.
For further information on emergency numbers, refer
to page xx.
Note: Multiple two second pauses can be
entered to extend the length of a pause. For
example, two consecutive two second pauses
cause a total pause time of four seconds.
However, keep in mind that pauses count as
digits towards the 32 digit dialing maximum.
Storing Pauses in a Phonebook Entry
To store a number in your Phonebook that contains
pauses:
1. Enter the phone number you want to store (such as
the bank’s teleservice phone number).
2. Press
30
. The Dial options display.
31
Call Functions
3. Press
or
Call Functions
to enter the desired pause.
• Press
for P pause. The letter “P” displays
in the number, meaning that a hard pause will
occur at that point in the dialing sequence.
• Press
for T pause. The letter “T”
displays in the number, meaning that a “Timed”
pause will occur at that point in the dialing
sequence.
4. Enter the digits that need to follow the pause
(such as your account number).
5. Store the number in your Phonebook as you
normally would by pressing
and following the
screen prompts.
Pause Dialing from a Stored Phonebook Entry
1. Dial the number from the Phonebook.
Manual Pause Dialing
You can enter pauses manually using the Dial
options during the dialing process.
1. Enter the phone number of the service you want to
call (such as a bank’s teleservice phone number).
2. Press
to display the Dial options.
3. Press
for P Pause. The phone displays a
“P” meaning a hard pause. Enter the number to be
sent after the pause and then press
. After
connecting, press
again to transmit the
additional number.
Press
for T Pause. The phone displays “T”
meaning a timed pause. When prompted, enter
the number to be sent after the pause and then
press
. The phone transmit the number that
follows the pause two seconds after connection.
2. If you stored the number using a two second
pause(s), your phone transmits the number that
follows the “T” pause two seconds after
connection.
If you stored the number using a hard pause(s),
wait for the appropriate prompt from the number
you are calling (credit card number, back account
number, etc.). When prompted, press
to send
the DTMF number that follows your hard pause.
3. “SENDING DTMF” flashes on the display and the
transmitted tone sounds.
32
33
Call Functions
Call Functions
Voice Dialing
Adjusting the Volume
Before using the Voice dialing feature, you must
record the name and number in your phone using the
Voice Dial menu. For further details, see page xx.
During a call, if you want to adjust the voice volume,
use the volume keys on the left side of the phone.
1. To place a call, press and hold
, or open the
phone, depending on the Set Active menu option
(7-3). See page xx.
Press
to increase and
to decrease the
volume. The illustration on the display shows all
eight levels (the more bars, the louder). No bars
indicates the key beep is turned off.
2. At the voice prompt, say the name into the
microphone.
• If the phone recognizes the name, the phone
attempts a connection.
• If the phone does not recognize the name, the
screen prompts for the name again.
• If the phone is unable to recognize the name
after three attempts, the message Did not
match any voicetag try again is displayed.
Try the call again later, or check the recorded
name.
In Standby mode, you can adjust the ringer volume
for calls using these keys.
3. The phone dials the corresponding number.
34
35
Call Functions
Call Functions
Answering a Call
In-Call Options
When somebody calls you, the phone alerts you by
ring, blinking service light and the following screen
on the display.
Your phone provides a number of functions that you
can use during a call. You may not utilize all of these
functions at all times. Many of the in-call options are
network services.
Press
during a call to access the following incall options:
Incoming
Digital
Call From
Mute/Quit: allows you to switch your phone’s
microphone off, so that the other party cannot hear
you.
Send : Answer
E n d : Silence
If the caller can be identified, the caller’s phone
number (or name if stored in your Phonebook) is
displayed.
Example: You wish to say something to another
person in the room but do not want the other party to
hear you.
1. To answer a call, open the phone. If the phone is
already open, press
Calls (Menu 1): allows you to access the Calls
menu. See page xx.
If the Answer Mode menu option (9-3) is set to
any key, you can answer a call by pressing any
key except
if the menu option is set to flip open, you can
answer a call simply by opening the phone.
2. End the call by closing the phone or pressing
Phonebook (Menu 2): allows you to access the
Phonebook menu. See page xx.
Notes:
• You can answer a call while using the phonebook
or menu features. The current operation will be
interrupted.
• If you cannot answer an incoming call, you can set
the phone to answer the call by the greeting
message and record the caller’s message. For
further information, see page xx.
36
Silent/Quit: does not transmit the key tones. It
allows you to press keys without hearing annoying
key tones during a call.
Send Tel #: sends DTMF tones of your number.
My Phone # (Menu 6-4): shows your phone number.
37
Call Functions
Call Functions
Quick-switching to Silent Mode
Call Waiting
Silent mode disables all sounds on the phone. This
feature is best used in situations where the phone
might disturb others, such as a meeting, library,
theater, etc. Your phone can be set to silent mode
with a press of a key.
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network. Contact your service provider to activate
Call Waiting.
To enter Silent mode, press and hold down
Pressing and holding down
Silent mode.
once again exits
Viewing Missed Calls
If you fail to answer a call for any reason, the phone
indicates a missed call by displaying a text
notification on the screen. Additionally, if caller
information is available, a Missed entry is created,
and the screen displays the phone number of the
most recent missed call.
Press
to call the displayed number, or
to
clear the message and return to Standby mode.
When a waiting call is detected, the incoming call
alert sounds (network dependent) and a text
notification displays. To answer a waiting call:
1. To answer the call, press
. The phone
connects the calling party, and places the current
party on hold.
2. Press
again to switch between two parties.
Call Forwarding
This feature provides the option of forwarding
incoming calls to another phone number, even while
your phone is off. Activating Call Forwarding does
not affect outgoing calls made from this phone.
Contact your service provider to activate Call
Forwarding.
To view the list of the missed calls, refer to
‘Missed’ on page xx.
38
39
e
Tentativ
Call Functions
Entering Text
Three-Way Calling
This feature enables you to conduct conference calls
with two separate parties at the same time. The
phone records only the first party into the Outgoing
Calls Log. But, you are billed airtime for each of the
outgoing calls separately. Contact your service
provider to activate Three-Way Calling.
When using your phone, you will need to enter text
at many times. For example, when storing a name in
the Phonebook, writing a text message or scheduling
events in your calendar. You can enter alphanumeric
characters into your phone by using your phone’s
keypad.
During a three-way call, if one of the callers hangs
up, you and the remaining caller will stay connected.
If you initiated the call and you hang up first, all
three parties are disconnected.
You are provided with the following text input
modes;
1. During a conversation, press
places the other party on hold.
. The phone
2. Enter the phone number for the third party, and
then press
again.
3. When the third party answers, press
begin your three-way call.
again to
• Word(T9): This mode allows you to enter English
words with only one keypress per letter. Each key
on a keypad has more than one letter - a single
press on
could be J,K or L. The Word mode
automatically compares your key presses to an
internal linguistic database to determine the
correct word. The Word mode requires far fewer
keystrokes than the traditional multi-tap method,
ABC mode.
• ABC: This mode allows you to enter letters by
pressing the key labeled with the desired letter
once, twice, or three times until the letter appears
on the display.
• Symbol: This mode allows you to enter
punctuation marks or symbols characters.
• 123: This mode allows you to enter numbers.
40
41
Entering Text
Entering Text
Changing Text Input Mode
4. You will find the selected text input mode
indicator at the bottom right of the display.
When you are in a field that allows characters entry,
you should notice the text input mode indicator in the
lower right corner of the display.
Enter name
Enter name
O K: A c c e p t
M e n u: O p t i o n s
O K: A c c e p t
M e n u: O p t i o n s
Directions for using each of the text input modes
appear later in this section.
Text input mode
indicator
To change to another text input mode;
1. Press
Note: If you want to exit the Options screen without
changing to a new mode, press
Chinese PY (Pinyin) Mode
Mode
Enter name
1Word
2A B C
3Symbol
41 2 3
5E x i t
Pinyin is a system to mark Chinese pronunciation in
Latin alphabets. With the pinyin input method, you
can enter Chinese characters by keying in the pinyin
string from the phone keypad and the phone
automatically presents the matching alternatives.
O K: A c c e p t
M e n u: O p t i o n s
2. Scroll to the desired mode by pressing
3. To select the highlighted mode, press
or
This mode allows you to enter Pinyin characters with
only one key press per letter.
You can change between Word and ABC mode to
enter words. To include a symbol or number(s)
between characters, Symbol and 123 modes are
also available.
42
43
Entering Text
Entering Text
Typing Characters in Pinyin Mode
1. Press keys corresponding to the phonetic spelling,
referring to the Roman letters printed on the keys.
Notice that the choices in the Character Selection
Map change.
Example: Typing
3. To select a character, press
to activate the
Character Selection Map. A number (1 to 5) is
added to the beginning of a corresponding
character. With the Character Selection Map being
activated, a normal press on
to
selects the corresponding character.
in Pinyin mode
Press
and
to enter ‘ji’
The Character Selection Map.
2. To scroll through choices in the Character
Selection map, use the navigation key.
Press
to select
with the Character
Selection Map being activated.
Notes:
• To insert a space when entering a text, press
when the cursor blinks in the Text Area.
• To remove the activate character in the Character
Selection Map, press
Using Tone Key in Pinyin Mode
When the character you are typing appears in the
Character Selection Map, you may select it,
without completing the Pinyin spelling or entering
the tone for the character.
44
Entering the tone of a character you are typing
narrows the number of choices in the Character
Selection Map. Entering the tone for a character is
optional, but it is especially useful if the Pinyin
spelling is similar between characters. To enter the
tone of a character, proceed as follows:
45
Entering Text
Entering Text
1. Enter the Pinyin spelling. For example, press
to get ‘yao’. Then, press
to display
a Tone menu. The display shows alternative Pinying
spelling and the four tone keys.
Notes:
• You may delete a previously entered tone by pressing
• To exit the Tone menu without making a selection,
press
Scrolling
Alternative spelling
Cancels tone input.
four tones
light tone
• To view your message without moving the cursor,
press the volume keys on the left side of the phone.
• To move the cursor left or right through your text
message, press
or .
Clearing Strokes and Characters
2. Press keys
to
to associate a tone with
the character. Pressing
associates the light
with the character. For example, press
to
associate the first tone. You can also press
to
to select an alternative Pinying spelling.
Press
one or more times to remove strokes to the
left. Once the Stroke Area is empty, pressing
removes characters from the Text Area.
Rapid Character Entry
3. Continue viewing and selecting the desired Chinese
character from the Character Selection Map as
described on page 46.
46
Rapid character entry is easy in any mode, using the
Character Selection Map. As you enter characters, your
phone predicts the next character you might want and
presents choices in the Character Selection Map area.
When a desired character appears, you may select it as
described on page 46.
For example, if you type the word “zhong guo (
)”
using the following keystrokes;
, you do not have to complete the Pinyin
spelling to include “guo ( )”. With no extra typing,
“ ” is displayed conveniently in the Character
Selection Map for you to choose.
47
Entering Text
Entering Text
Chinese Stroke Mode
Typing Stokes and Characters in Stroke Mode
This mode allows you to enter individual Chinese
strokes, in written order - from top to bottom, and
from left to right.
1. To type a character, press keys corresponding to its
component strokes. Press keys on the handset in the
order that you would write the strokes, using one
press per desired stroke.
Even though there are many different strokes used to
create Chinese characters, the strokes are classified
into 5 basic categories; heng, shu, pie, dian and zhe.
The basic strokes are printed on the keypad, on keys
to
To enter a stroke, press the key printed with the
stroke that most closely represents the exact stroke
you desire. The table shows the stroke/key
relationship:
Example: Typing (
) in Stroke mode
Key Stroke Area.
Press
to enter
then
to enter
The Character Selection Map.
To select , press
Categories
Keys
Strokes Represented in Each Category
2. The phone displays your strokes in the Key Stroke
Area and offers character choices in the Character
Selection Map. As you enter strokes, notice that
the choices in the Character Selection Map
change.
To scroll through choices in the Character Selection
Map, press the navigation key.
Note: If you are uncertain of the order of one or
more strokes, press
in place of each
questionable stroke. Continue entering strokes
until the character is displayed in the
Character Selection Map or until you have
finished the character.
48
49
Entering Text
3. When the character you are typing appears in the
Character Selection Map, you may select it
without finishing the stroke sequence for the
character. Characters displayed in the Character
Selection Map correspond to keys
to
on the keypad. To select a character from the
Character Selection Map and add it to your
message, press the corresponding key
to
Entering Text
Word Mode
To type a word, press keys corresponding to the
letters you need. Remember the following as you are
typing:
1. Press keys on the phone just once per desired
letter. For example, to enter ‘hello’, press
Clearing Strokes and Characters
2. The word you are typing appears in the display. It
may change with each key press.
Press
one or more times to remove strokes to
the left. Once the Stroke Area is empty, pressing
removes characters from the Text Area.
3. Type to the end of the word before editing or
deleting any keystrokes.
Rapid Character Entry
4. Complete each word with a space by pressing
Rapid character entry is easy in any mode, using the
Character Selection Map. As you enter characters,
your phone predicts the next character you might
want and presents choices in the Character Selection
Map area. When a desired character appears, you
may select it as described above.
If the word that appears in the display is not the
word that you desire, press
one or more times
to display alternate word choices for the keys you
have typed. (For example, ‘of’ and ‘me’ both shares
the sequence
. The phone displays the
most commonly used choice first.)
In most cases, you will see the desired character in
the Character Selection Map area before you have
entered all of the strokes to build it.
To type words not found in the T9 mode, change the
text input mode to ABC mode. Word typed in ABC
mode are automatically added to the T9 dictionary so
you can type them using Word mode the next time.
For example, try typing the twelve stroke character
pair “
“ using the following keystrokes;
. Even though “
“ is a twelve stroke
character pair, your phone enables you to type it in
only three key presses!
50
51
Entering Text
Entering Text
ABC Mode
Smart Punctuations
Period, hyphen, and apostrophe are available on
T9 applies rules of grammar to insert the correct
punctuation. Notice that
is used twice in this
example to display two punctuation marks:
‘
Including a Number
You can include a number between letters without
exiting the Word input mode. Press and hold the
desired number key.
When typing in ABC mode, you should press key
labeled with the required letter:
-Once for the first letter
-Twice for the second letter
-And so on.
For example, you press
three times quickly to
display the letter “C” ,
two times quickly to
display the letter “K”. So, this method is called
Multi-tap typing.
Refer to the table on next page for the list of
characters assigned on each key.
List of characters available:
Key
Characters in the Order Displayed
Scrolling
1 . – ‘ ! @ # % & * < > _ + = :
• To move the cursor left or right through your text
message, press
or
• To scroll through alternate word choices for the
keys you have entered, press
” ( ) / \ ? , { } $ [ ]
Clearing Letters and Words
Press
one or more times to clear letters to the
left. Press and hold down the key to erase a word.
52
(Caps Lock mode)
53
Entering Text
The cursor moves to the right when you press a
different key. When entering the same letter twice (or
a different letter on the same key), just wait for a few
seconds for the cursor to move right automatically,
and enter the next letter.
Entering Text
Symbol Mode
Symbol mode enables you enter symbols into a text
message.
Enter name
If you enter a specific word in this mode the first
time, the word is automatically added to your phone’s
database, and offers the new word as an option for
its keystroke sequence when you are in the Word
mode.
123456789
. - ’!@#%&*
O K: A c c e p t
M e n u: O p t i o n s
Changing Case
To shift the case of the next letter(s) that you type,
press
. There are three shift states: Lower Case
is indicated by
at the bottom right of the display,
Initial Capital is , and Capitals Lock is .
Inserting a Space
Press
to insert a space between the words.
Scrolling
To move the cursor left or right through your text
message, press
or
Press
or
to display more symbol sets.
Press keys corresponding to the desired mark, then
the phone automatically switches back to the text
entry mode used just prior to selecting Symbol mode.
123 Mode
123 mode enables you to enter numbers into a text
message. Press keys corresponding to the desired
digits, and manually switch back to the text entry
mode of choice.
Clearing Letters and Words
Press
one or more times to clear letters to the
left. Press and hold down the key to erase a words.
54
55
Using the Menus
Using the Menus
The phone offers a range of functions that allows
you to tailor the phone to your needs. These
functions are arranged in menus and submenus.
The menus and submenus can be accessed by
scrolling or using the shortcuts.
Accessing a Menu Functions by
Scrolling
1. In Standby mode, press
menu facility.
to access the main
3. Find the menu option you want, for example, Key
or
. Press
Beep, by scrolling with
to enter the menu option.
If the menu you have selected contains submenus,
repeat this step.
5. Press
or
The menu items (menu, submenus and setting
options) are numbered and can be accessed quickly
by using their shortcut number.
1. In Standby mode, press
facility.
to access the menu
2. Within three seconds, key in the first digit of the
shortcut number. Repeat this for each digit of the
shortcut number.
Example: Setting Connect tone to On
2. Scroll with
or
to reach the desired
main menu, e.g. Sounds. Press
to enter the
menu.
4. Scroll with
your choice.
Accessing a Menu Functions by Using
its Shortcut
Press
, and
5 for Sounds, 4 for Alerts, 3 for Connect
3. Find the setting of your choice by pressing
or
, then press
Note: The numbers assigned to each menu function
are indicated on the list on page xx.
to find the setting of
to confirm the chosen setting.
Notes:
• To return to the previous menu level, press
• You can exit the menu without changing the menu
settings by pressing
56
57
Using the Menus
List of Menu Functions
The list shows the menu structure available and
indicates the number assigned to each option.
1: Calls
1-1:
1-2:
1-3:
1-4:
Outgoing
Incoming
Missed
Erase Logs
1-4-1: Outgoing
1-4-2: Incoming
1-4-3: Missed
1-4-4: All
1-5: Air Time
1-5-1 Last Call
1-5-2 Total
1-5-3 Erase Total
1-5-4 Lifetime
2: Phonebook
2-1:
2-2:
2-3:
2-4:
2-5:
Find Name
Add Entry
Find Entry
RelationSrch
Add email
3: Game
3-1:
3-2:
3-3:
3-4:
58
Push Push
Fly Ribon
Puzzle World
SpiderHunter
Using the Menus
4: Scheduler
4-1:
4-2:
4-3:
4-4:
4-5:
4-6:
4-7:
4-8:
Today
View Month
Date
To Do List
Countdown
World Time
Calculate
Alarm Set
5: Sounds
5-1: Ringer Vol
5-1-1: Calls
5-1-2: Messages
5-1-3: Alarm
5-2: Ringer Type
5-2-1: Voice Calls
5-2-2: Messages
5-2-3: Alarm
5-2-4: Data/Fax In
5-2-5: Schedule
5-3: Key Beep
5-4: Alerts
5-4-1: Minute Beep
5-4-2: Service
5-4-3: Connect
5-4-4: Disconnect
5-4-5: Fade
5-4-6: Roam
5-4-7: Privacy
5-5: Voice Volume
5-6: Roam Ringer
5-7: Power On/Off
59
Using the Menus
6: Display
9: Setup
6-1: Backlight
6-2: Banner
6-3: Animation
6-3-1: Power On
6-3-2: Power Off
6-3-3: Idle 1
6-3-4: Idle 2
6-4: My Phone#
6-5: Language
6-6: Set Time
6-7: Auto Hyphen
6-8: LCD Contrast
6-9: Version
7: Voice Dial
7-1:
7-2:
7-3:
7-4:
7-5:
Using the Menus
Record
Play/Erase
Set Active
Training
Undo Train
9-1:
9-2:
9-3:
9-4:
9-5:
9-6:
9-7:
9-8:
9-9:
Auto Retry
Auto Answer
Answer Mode
Tone Length
Set NAM
Roam Option
Data/Fax
Whisper Mode
Security
9-9-1: Lock Mode
9-9-2: Restrict
9-9-3: Lock Code
9-9-4: Emergency #
9-9-5: Send PIN
9-9-6: Clear MEM
9-9-7: Reset Phone
9-9-8: Privacy
9-0: R-UIM Setup
9-0-1: Enable CHV
9-0-2: Disable CHV
9-0-3: Change CHV
8: Voice Rec.
8-1: Voice Memo
8-1-1: Record
8-1-2: Play/Erase
8-2: Call Answer
8-2-1: On/Off
8-2-2: Config
8-2-3: Inbox
60
61
Calls
Calls
Incoming
You can use the Calls menu to:
• View and dial the last outgoing or incoming numbers.
• Erase the numbers in the call logs.
• View the duration of calls.
Outgoing
Menu 1-1
The phone stores up to 10 outgoing calls you dialed.
When you access this menu, the list of the outgoing
calls is displayed.
1. Press
or
to find the desired number
(or name if saved in Phonebook).
2. Press
to select the highlighted number.
The dialed number (and name if stored in
Phonebook) is displayed.
3. If you want to access Options, press
following options are available:
Menu 1-2
This option lets you view the last 10 calls received (if
you are subscribed to the caller ID service). When
you access this menu, the list of the incoming calls is
displayed.
For further information on scrolling through the list
and accessing a call log, see “Outgoing” on page xx.
Missed
Menu 1-3
If the caller identification is available (contact your
service provider), your phone keeps a list of 10
incoming calls that you failed to answer.
For further information on scrolling through the list
and accessing a call log, see “Outgoing” on page xx.
. The
• Talk: dials the selected number.
• Save: allows you to save the number in the Phone
book.
• Call info: shows the date and time when the call
was made.
• Prepend: allows to add an area code or feature
code to the number before calling the
number.
Erase Logs
Menu 1-4
You can erase the entries stored in each of the three
call logs or all three logs at once.
The following options are available:
Outgoing: The calls you made are erased.
Incoming: The calls you received are erased.
If you want to place a call to the displayed phone
number, press
. To exit the call log, press
62
63
Calls
Phonebook
Missed: The calls you missed are erased.
All: All calls you made, received and missed are
erased.
When a confirming message pops up, press
to
erase the log. If you want to cancel the operation,
press
Air Time
Menu 1-5
Your phone records the amount of airtime (or talk
time) used. Using this option, you can view the
number of the calls to or from your phone, and the
airtime for all calls. You can easily erase the airtime
measurement at any time.
The Phonebook allows you to store frequently used
phone numbers and the associated names in your
personal directory to make it easy for you to make a
call without having to remember or enter the phone
number.
Find Name
This option allows you to find an entry by its name.
Note: You can locate Phonebook entries by name
quickly when the phone is in Standby mode. Press
to access this menu option in one step.
1. Press
The following options are available:
Last Call: shows airtime of the last call.
Total: shows the number of all calls made to or from
your phone and total duration of the calls
since the air time counter was lastly set to
zero by using the Erase Total option.
Erase Total: erases the “Total” airtime
measurement and resets the air time
counter.
Lifetime: shows the number and total duration of all
calls made to or from your phone since the
phone was shipped from the factory.
64
Menu 2-1
or
to scroll to the desired name.
You can also enter the character(s) of the name by
pressing the associated alphanumeric key(s). The
character(s) appears in the text entry box at the
bottom of the display. Press . Using this method,
the phone searches for the names in the list
containing that character(s), and then displays the
first name in that section of the list.
2. When the desired entry is highlighted, press
to access the entry.
Note: If you have stored the several numbers into
different categories under one entry, they are
listed under the name. Press
or
to find
the number you want.
65
Phonebook
Phonebook
3. The phone shows the details on the name.
Press
to place a call.
With an entry selected, if you press
access the following options:
, you can
Creating a New Entry
1. Enter a phone number and press
2. Your phone asks if you want to make a new entry.
Press
to confirm.
Talk: dials the number.
Add #: allows you to add a new entry or a number to
an existing entry.
Edit: allows you to edit phone number, name,
location number, label category and so on.
Prepend: prepends the number to add an area code
or feature code to the number before
dialing.
Erase: erases the number.
Name Ring: allows you to designate a unique ring
tone to signal an incoming call from the
number.
Email adr: allows you to store an email address in
the entry.
Add Entry
Menu 2-2
This menu allows you to store number with a name
in your Phonebook. You can store up to 500 entries.
Each entry can contain up to 32 digits with an
associated name of up to 16 characters.
Each entry is divided into 7 categories (Speed Dial,
Home, Office, Mobile, Pager, Fax, and Voice Dial ).
66
3. Highlight the desired option you want to customize
by using the Navigation key and press
. The
following options are available:
•Name: Enter the desired name. You can enter up
to 12 characters for a name. For further
information on how to enter text, see page xx.
•Location: The first available location displays. If
necessary, enter the location number using the
number keys, or press
or
to scroll to
the desired location.
•Secret: To set the number in secret, select On.
Setting Secret prevents a number from being
displayed when it is accessed by unauthorized
user, or dialed. When you have made the number
secret, only a person with your phone’s lock code
can view the number.
•Category: Select the label for the number. The
available categories are Speed Dial, Home, Office,
Mobile, Pager, Fax, No Label, or Voice Dial.
Note: If you store a number with the label ‘Voice
Dial’, the phone prompts you to record a name
after you complete customizing all other options
by pressing
. For more information on
recording a name for voice dialing, see page xx.
67
Phonebook
Phonebook
•Relation: Select the desired one of the four
predefined relation groups, where the entry is
included. Grouping the entries enables you to
locate only the numbers in the desired group.
See page xx.
•Ringtype: Select the unique ring type for the
entry. By selecting different tones, incoming
voice calls which have caller ID can be
distinguished from those that do not.
4. Press
option.
to accept the setting for the selected
5. Repeat steps 3 and 4 to customize another option.
6. Press
to save the entry.
After storing, the phone displays the phonebook
entry number you saved and the remaining entries
you can further store phone numbers, then
automatically returns to Standby mode.
Storing Phone Numbers at Call End
To store a phone number at your call end:
1. Press
to end the call. The call time and the
phone number display.
2. To store the phone number, press
Adding a Number into an Existing Entry
You can store up to eight numbers per entry by
assigning them to different categories. Note that you
cannot duplicate same categories for one entry. For
example, you can only have one number labeled
‘Mobile’ for the selected entry.
1. In Standby mode, enter a number and press
2. When your phone asks if you want to make a new
entry, find the desired entry using
or
and press .
3. Press
or
repeatedly to go to the
Category field and press
4. Find the desired category label using
and press
5. Press
or
to store the number.
Note: If you have selected the label already used for
another number, the message asking if you want to
overwrite the number appears along with a warning
tone. Press
and select a new one.
3. To complete storing the number, follow the
instructions in “Creating a New Entry.”
68
69
Phonebook
Phonebook
Find Entry
Menu 2-3
Add email
Menu 2-5
This option allows you to find an entry by its location
number.
This option allows you to store an e-mail address as
a phonebook entry.
Note: You can locate Phonebook entries quickly
when the phone is in Standby mode. Press
to
access this menu option in one step.
1. Enter the e-mail address and press
For further information on entering text, see page
xx.
1. Enter the location by pressing the numeric keys.
2. When the desired entry displays, press
place a call.
to
Note: If you have stored the several numbers into
different categories under one entry, they are listed
under the name. Press
or
to find the
number you want.
Note: You can insert .com or .net which is often
used for e-mail addresses from the Mode popup
list when pressing
2. The phone asks if you want to make a new entry.
Press
and complete storing the address.
For more information on creating a phonebook
entry, see page xx.
If you press , you can access the options. For
further information on Options, refer to the Find
Name menu on page xx.
Relation Search
Menu 2-4
This option allows you to find an entry by its relation
group.
1. Select the group containing the entry you want to
find using
or
and press .
The phone lists all entries in the selected group.
2. Scan through the list using
the desired entry.
70
or
to find
71
Game
Scheduler
You can enjoy several games using your phone. Your
phone has the following games.
• Push Push
• Fly Ribon
• Puzzle World
• SpiderHunter
Press
or
to start.
The Scheduler feature enables you to:
• Keep track of important dates and events.
• Create a list of things to do.
• Set and count D-Day.
• Check the time in another part of the world.
• Use the phone as a calculator.
• Set the phone to ring at a specified time.
to scroll to one of the games and
Today
On the game screen, press
to get help on the
game if available. To go back to the game, press
To quit the game, press
at any time.
Note: The key operation may vary depending on the
selected game. Please use the onscreen help.
Menu 4-1
You can schedule up to 9 events for the current day
indicating each event’s start and end time. You can
be alerted by the Calendar function before an event
is commenced. Events scheduled for future dates
automatically appear on your Today events schedule
on that particular day.
Scheduling an Event
1. Enter your event information and press
accept your input.
to
You can enter up to 32 characters. For further
information on how to enter text, see page xx.
2. Enter the Start time and date using the numeric
keys, and press .
Note: Use the volume keys on the left side of the
phone to toggle between AM and PM.
72
73
Scheduler
Scheduler
3. Enter the End time and date using the numeric
keys, and press .
4. Select when an alarm will notify you of your event
by pressing
or
. Selecting No alarm
does not ring the alarm.
5. Press
to save your event.
Menu 4-2
This option allows you to view the past or future
month as well as the current month in calendar
format. In this option, the current date is highlighted
on the calendar. Days with the scheduled events are
marked with in front of them.
• You can move to the next or the previous day by
pressing
or
Adding, Editing, or Erasing an Event
If you already scheduled events when you select the
Today menu option (4-1), the events are displayed.
Press
or
to select the event you want to
view. If necessary, press
to display more
contents in the selected to-do item.
The following options are available when you
press .
Add new: allows you to add a new event.
Edit: allows you to edit a selected event.
Erase: allows you to erase a selected events.
After you select an option, press
screen prompt.
View Month
. Then follow the
• You can move up or down the Calendar by one
week by pressing
or
• To display the next or previous month, use the
volume keys on the left side of the phone.
The following options are available when you press
View: allows you to view the scheduled events of
the selected day.
Add new: allows you to add a new event on the
selected day.
Creating a New Event
Scroll to the desired date in the calendar using the
navigation keys and volume keys and then press
to confirm the selected date. And schedule a new
event referring “Today” on page xx.
Adding, Editing, or Erasing an Event
When a scheduled event is displayed, press
access the Options.
74
to
For further details on Options, refer to “Today” on
page xx.
75
Scheduler
Scheduler
Date
Menu 4-3
This feature allows you to specify the date you want
to view so that you can easily go to the day without
scrolling through the Calendar. Once the date is
obtained, you can create, edit and delete events on
your calendar.
Enter the desired date using the numeric keys, and
press
. When the day you selected is
highlighted, press
to access it.
3. Select High or Low priority using
4. Press
or
to store the task.
Adding, Editing and Erasing a To-Do Item
If tasks are already defined in the To Do List when you
select the To Do List menu option (4-4), the most
lately created task is displayed with the deadline and
the associated priority ([Hi] for high priority or [Lo] for
low priority).
To create, edit or erase the events, refer to “Today”
on page xx.
Scroll to the desired item by pressing
or
. If
necessary, press
to display more contents in the
selected to-do item.
To Do List
The following options are available when you
press .
Menu 4-4
This feature allows you to draw up a list of tasks you
need to do and assign a priority and deadline to
them. You can store up to 20 tasks.
Creating a To-Do Item
1. Enter the task contents and press
You can enter up to 32 characters. For further
information on how to enter characters, see page
xx.
2. Enter your deadline using the numeric keys.
Note: Use the volume keys on the left side of the
phone to toggle between AM and PM.
76
Add new: allows you to add a new task.
Edit: allows you to edit the selected task.
Erase: allows you to erase the selected task.
After you select an option, press
screen prompt.
Countdown
. Then follow the
Menu 4-5
This menu helps you know how much time it takes
you to do something, or how many months, days,
hours and minutes until a specific event. You can
create up to 5 Countdown timers using this feature.
77
Scheduler
Scheduler
World Time
Creating a Countdown Timer
1. Enter a name for your new Countdown timer and
press .
Menu 4-6
You may want to call a friend in another part of the
world but wondered what time of the day it is there.
To know what time it is, use this menu option.
You can enter up to 16 characters. For further
information on entering text, see page xx.
Note: This world time does not consider the summer
time.
2. Enter the date and time that you want to count
down from.
When accessing the World time menu, you can see
two globes set to GMT by default.
Notes:
• Use the volume keys on the left side of the phone
to toggle between AM and PM.
• You can enter the years between 1980 and 2099
for the year.
Adding, Editing and Erasing a Countdown Timer
Press
or
to alternate between both globes.
You can use them to find out the time in the two
different parts of the world. For example, set the
‘Current’ globe to Las Vegas and ‘Another’ globe to
‘Korea’. You can easily see the time lag between
them. To scroll to the desired time zone, press
or
If a Countdown timer is already defined when you
select the Countdown menu option (4-5), the defined
Countdown timer is displayed.
The following 31 time zones (identified by one or
more major cities, states, regions or countries in a
time zone) are available:
3. Press
to save the item.
If there are more than one items defined in the menu,
scroll to the desired item by pressing
or
, and
press .
The following options are available when you press
Add new: allows you to create a new item.
Edit: allows you to edit the item.
Erase: allows you to delete the item.
After you select an option, press
screen prompt.
78
. Then follow the
• France
• Iran
• Perm
• Omsk
• Lake Baycal
• Sakhalin
• Midway Islands
• Las Vegas
• Atlanta
• Greenland
• London, UK
• Finland
• Oman
• India
• Myanmar
• Korea
• Magadan
• Aleutian Islands
• Calgary
• Fredrictown
• Atlantic
• Moscow
• Afghanistan
• Nepal
• Vietnam
• Darwin
• Kamchatka
• Alaska
• Chicago
• Newfoundland
• Azores
79
Scheduler
Scheduler
Calculate
Menu 4-7
Alarm Set
Menu 4-8
Using this feature, you can use the phone as a
calculator. The calculator provides the basic
arithmetic functions: addition, subtraction,
multiplication and division.
This option allows you to set the alarm to ring at a
specific time.
Performing a Calculation
1. Select the alarm frequency option by pressing
or
and press .
To set the alarm, proceed as follows:
1. Enter the first number using the numeric keys.
• Daily: the alarm rings every day at the same
time.
2. Press
or
to set the operator for your
calculation until the required arithmetic symbol
appears: + (add), - (subtract), x (multiply), / (divide).
• Once: the alarm rings only once and is then
deactivated.
2. Enter the required time when an alarm rings using
the numeric keys.
3. Enter the second number.
4. To calculate the result, press
Note: Use the volume keys on the left side of the
phone to toggle between AM and PM.
5. Repeat steps 1 to 4 as many times as required.
Each time you change the operator without
pressing
, the previous calculation is
performed and the result is displayed as the top
number in the display.
Notes:
• To erase any mistakes and clear the display, press
• Use
to enter a decimal point and
to
change the sign of a number to a negative (-).
80
3. Press
to save the setting.
To stop the alarm when it rings, simply open/close
the phone or press any key.
To deactivate the alarm, access the Alarm Set menu
option, select Off in the frequency options and press
81
Sounds
Sounds
Ringer Type
You can use the Sounds menu to customize various
sound settings, such as the:
• Ringer volume, type, and tone
• Key beep and voice volume
• Alert sounds and a ringer for the roaming calls
• The ringer which sounds when the phone is
switched on or off
Ringer Volume
Menu 5-1
This menu option allows you to adjust the ringer
volume.
Calls: allows you to adjust the ringer volume for the
incoming calls.
Note: You can adjust the the volume using
the volume keys on the left side of the phone
in Standby mode.
Messages: allows you to adjust the ringer volume
for the incoming messages.
Alarm: allows you to adjust the ringer volume for an
alarm.
Press
or
(or volume keys on the left side
of the phone) to adjust the volume.
Selecting Vibrate switches the phone to vibration
mode. An incoming call vibrates the phone.
Selecting 1-Beep sounds a beep.
Selecting Silent does not sound the ring.
82
Menu 5-2
This option allows you to set a unique ring for voice
calls, messages, data/fax, alarm, and schedule. Select
a unique ring tone from 25 melodies. As you change it,
it sounds for a few seconds.
Voice Calls: allows you to set a unique ring for
incoming voice calls.
Messages: allows you to have distinctive rings for
voicemail notifications, text messages,
and browser messages respectively.
Alarm: allows you to have a distinctive ring for an
alarm.
Data/Fax In: allows you to be alerted with a
distinctive ring tone when you are faxed
or received a data through the phone
(dependent on the network ).
Schedule: allows you to have a distinctive ring for an
schedule alarm.
Key Beep
Menu 5-3
This option allows you to adjust the tone volume that
the keypad generates each time you press a key.
Press
or
(or volume keys on the left side of
the phone) to adjust the volume.The illustration on the
display shows up to eight levels (the more bars, the
louder). Selecting Silent turns off the key beep.
83
Sounds
Alerts
Sounds
Menu 5-4
Your phone gives audible alerts (beeps) at a specified
time to inform you that certain things have happened.
The alerts only occur in your earpiece so the other
party does not hear them.
The available alerts are:
Voice Volume
Menu 5-5
This option enables you to adjust the voice volume of
the earpiece.
Press
or
to adjust the volume (or volume
keys on the left side of the phone). The illustration on
the display shows the level strength.
Minute Beep: With this menu option set to On, the
phone sounds an alert 10 seconds
before each elapsed minute to remind
you of the length of the current call.
Note: You can adjust the volume using the volume
keys on the left side of the phone during a call.
Service: With this menu option set to On, the phone
sounds an alert when you exit service area
or when you return to a service area.
Roam Ringer
Connect: With this menu option set to On, the phone
sounds the connect tone when your call is
connected to the system.
Disconnect: With this menu option set to On, the
phone sounds the disconnect tone when
a call is disconnected.
Fade: With this menu option set to On, the phone
sounds an alert when a dropped call occurs
during conversation in response to a signal
fade.
Roam: With this menu option set to On, the phone
sounds an alert when your phone starts
roaming.
Privacy: With this menu option set to On, the phone
sounds an alert when you loose a private
encrypted CDMA line.
84
Menu 5-6
You can set the phone to use a distinctive ring for
incoming roaming calls.
Press
or
to choose On to use a distinctive
ringer or Off to use a normal ringer.
Power on/off
Menu 5-7
This option allows you to turn on or off the phone
sounds when it is switched on and off.
Press
or
to select On to turn the sound on
or Off to turn it off.
85
Display
Display
Banner
Menu 6-2
The Display feature enables you to:
• Set the length of time for backlight.
• Create your own greeting, and select an
animation to be displayed in Standby mode or
when powered on or off.
• Adjust the screen contrast of the main LCD.
• View the version of your phone.
This option allows you to set a banner message to be
displayed at the bottom of the display in Standby
mode. It can also be used as your ID when sending
an e-mail.
Backlight
2. Enter your banner message up to 30 digits by
using the alphanumeric keys. For further
information on how to enter letters, refer to page
XX.
Menu 6-1
You have several options for setting how the LCD
backlight operates. When the phone is closed, the
backlight remains off thus conserving battery power.
When the phone is open, the length of time that the
backlight remains on can be set as explained below.
Remember that backlight use drains your battery
faster.
To change the banner:
1. If necessary, press
old greeting.
repeatedly to clear off the
3. When entering is completed, press
the new banner.
Animation
to save
Menu 6-3
The following options are available:
30 (/15/7) seconds: The backlight comes on when
you press a key or receive a call
and switches off 30(/15/7)
seconds after the last key is
pressed.
flip open: The backlight comes on each time you
open the phone.
always off: The backlight is not used.
Your phone displays animated images in Standby
mode or when it is turned on or off. This setting is
just for fun and grins, so have fun with it.
The following options are available:
Power On: You can select an image to be displayed
when you switch the phone on. 4 images
are available. Also, you can download up
to 4 images from the wireless web.
always on: The backlight remains on while the
phone turns on.
86
87
Display
Display
Power Off: You can select an image to be displayed
when you switch the phone off. 4
images are available. Also, you can
download up to 4 images from the
wireless web.
Idle 1 (/2): You can store an animation to Idle 1 and
Idle 2. These two animations will be
used as one of the items to be displayed
in the Standby mode.
My Phone Number
Menu 6-4
This option shows your phone number.
After viewing the number, pressing
Standby mode.
Language
returns to
Set Time
Menu 6-6
This option allows you to set the current date and
time.
To set the date and time, proceed as follows:
1. Select On by pressing
or
and press
Selecting Off returns to Standby mode.
2. The current time, if set, displays. Enter the current
time and date using the numeric keys.
The month, day, hour and minute must be entered
with 2 digits. The year requires all four digits. And
you must enter the hour in 12-hour format.
Note: Use the volume keys on the left side of the
phone to toggle between AM and PM.
Menu 6-5
Sets the language of voice prompts, menus and keyinput.
3. When entering is completed, press
time and date.
to save the
If you enter a wrong time, the phone displays
‘Invalid time’ and prompts you to enter again.
Select the desired language by pressing
or
. The available languages are ENGLISH,
CHINESE.
Note: This setting does not affect the Web Browser.
88
89
Display
Auto Hyphenation
Menu 6-7
Voice Dial
With this menu option set to On, your phone
automatically hyphenates numbers when you dial a
number. This hyphenates numbers as follows: 000000-0000. Digits following a pause are not
hyphenated.
When your phone is in digital mode, you can call up
to 20 stored entries by speaking the name into the
microphone. Using the Voice dialing option requires
that you first program the phone to recognize the
name of the person you are calling.
LCD Contrast
Record
Menu 6-8
The menu allows you to adjust the brightness of the
main LCD screen.
Press
to make the screen brighter, and
to make the screen darker. You can also use the
volume keys to adjust the brightness.
Each time you press the key, you will see the
selected status of the LCD.
Note: This setting does not affect the external LCD.
Version
Menu 6-9
This option allows you to view the software and
hardware versions of your phone. This feature is
helpful if you have to call customer care.
Menu 7-1
This option allows you to record names and register
numbers for subsequent voice dialing. The phone
provides voice prompts and screen displays to guide
you through the recording process.
1. Say the name you want to program at the prompt.
The phone stores the name as a first sample.
2. Respond to the prompt by repeating the name
after the beep. The phone stores the name as a
second sample, and then prompts you to enter the
phone number.
3. Enter the phone number by pressing the numeric
keys and press .
4. Complete storing the number into Phonebook
referring page xx.
Note: You can also program the phone for voice
dialing by accessing the Phonebook menu. Use Add
Entry menu under Phonebook to store a phone
number, then select Voice Dial from the label
category. For Further details, see page xx.
90
91
Voice Dial
Voice Dial
Tips on Recording Name
Press
• Avoid recording similar names phonetically. If you
record a similar name to the one already in
memory, the phone requests another name.
Info: shows the Phonebook information on the
selected entry.
• Speak clearly and naturally.
Erase all: erases all entries in the Voice Dial list.
• The person who will use the phone should record
the name. The phone does not recognize the name
if the voice sounds differently.
Talk: places a call to the number stored in the
selected entry.
• Avoid too long or too short name. Names with two
to five syllables are recommended.
to access the following options:
Erase: erases the selected entry.
Phonebook: allows you to edit the Phonebook
information on the selected entry.
• If this feature does not work properly, erase the
name, and record with another name.
Play all: plays back all names in the Voice Dial list.
• It is recommended to practice several times to
obtain best result.
Set Active
• You can record up to 20 names. If you try to record
more than 20, the phone announces ’Memory is
full’.
Play/Erase
Menu 7-2
This option allows you to check or erase an
individual voice dial entry. A list of the entries
displays.
Press
or
the desired entry.
Press
92
to scan through the list and find
to play back the recorded name.
Menu 7-3
Voice Dialing is always active once you have
programmed the phone to accept voice dialing
entries and the associated phone number.
To place a call using Voice Dialing, simply press and
hold
in Standby mode and then say the name
into the phone after you hear the prompt.
You can also initiate a Voice Dialing call just by
opening the flip, when you select this option.
# Only: enables Voice Dialing only by pressing and
holding
# or Flip: enables Voice Dialing by pressing and
holding
or by opening the phone.
93
Voice Dial
Training
Voice Dial
Menu 7-4
You can set your phone to get your voice
confirmation before dialing with your voice if there is
similar names phonetically and the phone is
confused which number you want to dial.
To activate this feature, you must train your phone to
recognize the control words Yes and No.
Once the control words are recorded, the phone will
try to get your voice confirm unless you select the
Undo Train menu option (7-5) if the phone is
confused with similar names.
Undo Train
Menu 7-5
If you do not want to be asked to confirm the name
by the phone when voice dialing, activates this menu
option to cancel the trained control words. Even
though the name you said is confusing with another,
the phone dials the number as it recognizes.
Press
to activate this menu.
To deactivate this menu option and you want to set
the phone to ask your confirm before dialing, you
must train the phone again using the Training menu
option (7-4).
To record control words:
1. The phone will prompt you to say the control word
Yes. Say ‘Yes.’
2. At a confirming prompt, say ‘Yes’ again.
3. The phone will prompt you to say the control word
No. Say ‘No.’
4. At a confirming prompt, say ‘No’ again.
94
95
Voice Record
Voice Record
This menu allows you to:
• record a voice memo to memorize the things you
must remember.
• set the phone to answer an incoming call with a
greeting message and record the caller’s message.
Note: You can record the voice memos and caller’s
messages up to 8 minutes in all.
Voice Memo
Menu 8-1
You can record voice memos. When recording, a
timer displays to show you the elapsed time. When
recording time expires, an alert sounds to indicate
and you can save the memo already recorded by that
time.
4. Press
or
and press
to select Save from the list
If you want to play back the memo you have
recorded, select Play.
If you want to discard the currently recorded memo
and re-record a new one, select Record.
If you want to quit saving the recorded memo,
select Quit or press
5. Enter the title for the memo and press . For
further information on how to enter text, see page
xx.
If you press
without entering a title, the
memo is saved labeled with ‘No Title’.
Note: When your phone is in analog mode, this
function is not available.
Recording a New Memo
1. Press
when Record is highlighted.
If there is no recorded memo when you access
this menu option, the phone asks if you want to
record a new memo. Press
to start recording.
2. Wait until a prompt beep sounds and record the
voice memo by speaking into the microphone.
While recording, you can pause recording by
pressing
, and resume by
3. When recording is completed, press
96
Playing Back or Erasing a Recorded Memo
1. Press
or
to select Play/Record, and
press
The list of the recorded memos appears.
2. Press
and press
or
to scroll to the desired memo
to play it back.
While playback, you can pause playing by pressing
, and resume by
97
Voice Record
Voice Record
3. If you want to access the following options,
press .
• Info: shows the detailed information on the
memo, such as the title, elapsed time, memory
used for the memo and the time when the
memo was recorded.
• Erase: erases the selected memo.
• Erase All: erases all of the recorded memo.
4. Press
to go back to the previous screen or
to return to Standby mode.
Call Answer
Menu 8-2
Using this menu, in case that you are not able to
answer an incoming call, you can set your phone to
answer calls with the predefined greeting message
that came with the phone or your own message and
record the caller’s message.
Turning on or off Call Answer
1. Press
when On/Off is highlighted
2. Select Enable to turn on this feature or Disable
to turn off using
or
3. Press
98
to save the setting.
4. If you turned on Call Answer, the phone shows the
current configuration for the Call Answer feature.
To change them, press
options. See page XX.
and configure the
If you are satisfied with the current settings, press
With this feature enabled, the phone answers the
incoming calls, and the callers can leave you the
message after a greeting message.
Notes:
• While recording the caller’s message, you can
answer the call by pressing
• When your phone is in analog mode, this function
is not available.
Configuring the Call Answer Options
1. Press
or
2. Press
to
option, and press
to scroll to Config, and press
to scroll to the desired
The following two options are available:
• Greeting: allows you to record your own
greeting message and select the desired
message to be played at an incoming call. For
further information on the greeting message,
see page xx.
99
Voice Record
Voice Record
• Screening: turns on or off the screening
speaker which allows you to listen to the
caller’s message while the caller is leaving it.
• Wait time: sets the time the phone waits
before answering the call with the greeting
message. You can select one among After 3
sec, After 5 sec, and After 10 sec. Selecting
No ring plays back the message as soon as the
phone receive signal of a call.
3. After setting the options, press
setting.
to save the
4. Press
to back up one menu level. Or, press
to return to Standby mode.
Recording and Selecting a Greeting Message
You have a predefined greeting message to be
played when a call comes in. Also, you can have one
greeting message recorded as your preference.
To record your own message:
or
100
or
6. When recording is completed, press . The
phone automatically saves and activates the
message.
7. If you want to play back the currently selected
message, highlight Play and press
If you want to record a new message, highlight
Record and press . Repeat steps 5 to 6.
Note: Each time you record a message, your
phone automatically overwrites the old message.
If you want to select a greeting message to be
played, highlight Select and press
. Select
Mine to use your own message and Default to
use the default message and press
to back up one menu level. Or, press
to return to Standby mode.
to scroll to Config, and press
3. When Greeting is highlighted, press
4. Press
While recording,you can pause recording by
pressing
, and resume by
8. Press
1. Access the Call Answer menu option.
2. Press
5. Wait until a prompt beep sounds and record the
voice memo by speaking into the microphone.
to scroll to Record and press
101
Voice Record
Setup
Listening to the Caller’s Messages
1. Press
or
to scroll to Inbox , and press
. The list of the recorded memos appears.
Note: If the phone has the caller’s messages
waiting to be checked, it displays the total number
of the messages and the date and time when the
last message was recorded. Pressing
takes
you to Inbox.
2. Press
or
to scroll to the desired
message and press
to play it back.
While playback, you can pause playing by
pressing
, and resume by
3. If you want to access the following options,
press .
• Info: shows the detailed information on the
memo, such as the caller’s number (if identified),
elapsed time, memory used for the message
and the time when the memo was recorded.
• Erase: erases the selected message.
• Erase All: erases all of the recorded messages.
• Talk: places a call the caller’s number (if
identified).
• Save: stores the caller’s number (if identified)
into your Phonebook.
4. Press
102
to back up one menu level. Or, press
to return to Standby mode.
Many different features of your phone can be
customized to suit your preferences.
Auto Retry
Menu 9-1
With this menu option activated, your phone will
automatically retry the call up to 10 times when a
connection fails.
To activate this feature, select how often the phone
will automatically retry the call. 60 Seconds, 30
Seconds, and 10 Seconds are available.
Select Off deactivates this feature.
Auto Answer
Menu 9-2
With this menu option activated, the phone
automatically answers calls after predefined rings.
This option is useful while driving, for instance.
To activate this feature, select how many times your
phone rings before answering an incoming call. 1
Ring, 3 Rings and 5 Rings are available.
With this menu option set to Off, the phone does
not answer an incoming call, and if you do not
answer the call, it is stored in Missed Call log (see
page xx).
103
Setup
Answer Mode
Setup
Menu 9-3
This menu option allows you to select how to answer
an incoming call. It is preset to SEND key. The
following options are available:
SEND key: The phone answers only when you press
flip open: The phone answers when you open the
phone.
Set NAM
Menu 9-5
Your phone can store two NAMs (NAM stands for
Numerical Assignment Module-essentially your
telephone number). This means you can have tow
phone number on your phone, and you can quickly
and easily switch your service back and forth
between the two numbers.
any key: The phone answers when you press any
key except
Select NAM-1 or NAM-2 using
or
. If
you have changed the NAM, the phone will
automatically reboot and acquire service using the
new NAM setting.
Tone Length
Roam Option
Menu 9-4
The tone length setting enables you to select
Normal or Long DTMF (dual-tone multi-frequency)
tones. When you use a teleservice (such as your
bank account) and press the keys to enter numbers
into the teleservice, you are sending DTMF tones.
The system used by the bank or other service
determines if you need short or long DTMF tones. If
the service is digital (which most are these days)
normal DTMF will almost always work. However,
some new systems and almost all older (analog)
systems require you to use long DTMF tones. Many
home answering machines require long DTMF tones.
104
Menu 9-6
Your phone allows you to control your phone’s
roaming ability. Roaming is a feature which is only
relevant in areas where there are at least two
cellular service providers having valid roaming
agreements. Roaming allows you to register your
phone on one of the networks, but use the facilities
of the other if your own network is not available.
This system priority feature allows you to program
your phone for optimum operation when within your
home service area or when outside your home
service area.
105
Setup
Setup
You should always check your phone’s display
because it will let you know when you’re outside the
service provider network and whether your phone is
operating in another network.
• your home network : Only the Digital Mode
displays.
icon
• Other CDMA networks: The Roaming icon
the Digital Mode icon display.
and
• Other Analog network: The Roaming icon
the Analog Mode icon display.
and
You have two option which allows you to control the
phone’s roaming ability.
No Roaming: With this setting, you cannot roam. If
your home system is not available,
your call will not be connected and the
No Service indicator
is displayed.
Standard: Your phone automatically search for a first
available one of all types of service
according to the Preferred Roaming List
supplied by the service provider.
Data/Fax
Menu 9-7
Your phone is capable of sending and receiving
digital data and fax call when connected to a
computing device (laptop, desktop, handheld,
palmtop, etc.) running Windows NT, Windows 95 or
later. The phone functions just like a typical modem
on your PC, enabling you to use wireless data
involving a wide variety of Windows software
applications.
To use digital data or fax services with your phone,
you will need to obtain digital data/fax kit from your
service provider. This kit will contain the necessary
cables, software, and documentation required for
you to connect and use your phone with your
computing device.
Note: The phone must be on a digital network to
receive or send fax and data.
The following options are available:
Data/Fax Off: Your phone receives voice calls only.
Fax for Powered Off: Your phone receives fax calls
until you power off and back
on the phone.
Fax for Next Call: Your phone receives fax calls for
next 10 minutes.
Data until Powered Off: Your phone receives data
calls until you power off
and back on the phone.
Data for Next Call: Your phone receives data calls
for next 10 minutes.
106
107
Setup
Setup
Security
Receiving a Fax or Data File
To receive a fax or data, ensure that your phone is
connected to your PC and is powered on, and select
a desired option.
Menu 9-9
Your phone provides you with various security
options, including a user-programmable lock code
and special number features.
When you receive a fax call, set up the Answer
mode in the Fax program on your PC and click on
Receive and select one of the following:
To access the Security menu, you must enter the 4digit lock code. It is preset to 0000 by default.
• Automatic Receive (recommended)
• Manual Receive
Lock Mode
Sending a Fax or Data File
When connected to a computing device, your phone
allows wireless fax and data transmissions. Your
computing device software initiates the call to the
destination phone number. The phone functions as a
wireless modem to send the fax or data file to the
number designated by your PC software.
Whisper Mode
Menu 9-8
Whisper mode automatically increases the receiving
sensitivity of the microphone to obtain the maximum
quality of a call even when you speak in a softer
voice so that the caller can hear you as if you are
speaking normally.
Note: It is not recommended that the ear piece be
used while using Whisper mode. Audio level may
increase without notice depending on the
surrounding conditions.
Locking the phone limits use of the phone except an
emergency call.
When the phone is Lock mode, the phone receives
incoming calls and messages.
The following options are available:
Never: the phone remains unlocked.
On Power Up: the phone locks automatically at the
next time your phone turned on.
Now: the phone locks immediately.
Once your phone is locked, you can see the message
‘Locked’ at the bottom of the display.
To place an emergency call in Lock mode, enter the
number and then press
. The phone recognizes
the hard-coded emergency numbers or three
programmed emergency numbers (Menu 9-9-4).
To unlock the phone, press
and enter the 4-digit
lock code. The phone is immediately unlocked.
Select On to use this mode, or Off not to use it.
108
109
Setup
Restrict
This feature allows you to restrict outgoing calls
from your phone except emergency calls by the
hard-coded emergency numbers (911, *911 and #911)
or three programmed emergency numbers (Menu 99-4). Once you restricted the phone, storing a number
is also unavailable.
Select Yes to turn this feature on or No turn it off.
Setup
IMPORTANT NOTICE!
Because of various transmission methods, network
parameters and user settings used to complete a call
from your wireless phone, a connection cannot
always be guaranteed. Therefore, emergency calling
may not be available on all wireless networks at all
times.
DO NOT depend on this phone as a primary method
of dialing 911 or for any other essential or
emergency communications.
Remember to always turn your phone on and check
the adequate signal strength before placing a call.
Lock Code
To store a emergency number:
This feature allows you to change your current lock
code to a new one. The lock code is preset to 0000
at factory.
Enter a new, four-digit lock code and enter the code
once again at a prompt.
1. Press
or
and press .
to find the desired location
Note: Your phone does not allow viewing of the lock
code for security reason. So, if you have changed
the lock code, be sure to write down or memorize it.
2. Enter the desired number and press
to save
the number.
Each emergency number can be up to 10 digits
long. The number already stored in the selected
location is automatically deleted when you enter a
new number.
Emergency Number
To make an emergency call in Lock mode, simply
enter a programmed number, then press
Your phone provides the option of storing three
emergency numbers. All these numbers can be
manually dialed at any time even when your phone is
locked.
110
111
Setup
Setup
Send PIN
Reset Phone
Note: Your service provider must enable this feature
and assign you a PIN in order for this feature to
work.
Resetting the phone returns to all user-selectable
options to the default settings.
This feature prevents your phone from being used by
unauthorized persons. The feature is only available if
your service provider supports this service and you
have a PIN (Personal Identification Number) assigned
by the system supplier. Contact the service provider
for complete information on this feature.
When a confirmation displays explaining that you
will reset the phone, press
to confirm. The phone
reboots (turns itself off then on), then returns to
Standby mode.
Or, press
menu.
to cancel your selection and exit this
The following options are available:
Never: The option is not activated.
Privacy
Prompt: When you make a call, you are asked to
send PIN.
Used only in digital networks, Voice Privacy encrypts
the voice channel so that people cannot eavesdrop
on your conversation.
Clear Memory
The following options are available.
This menu allows you to erase all data you have
stored in the phone’s memory, such as phonebook
entries, tasks, schedules, call logs and so on.
When a confirmation displays explaining that you
will clear all data in the phone memory, press
to
confirm. The phone reboots (turns itself off then on),
then returns to Standby mode.
Or, press
menu.
112
Enhanced: turns this feature on. The phone will
make and receive calls on an encrypted
high security line.
Standard: turns this feature off. The phone will use
a standard line for calls.
Note: This feature may not be available in all areas.
Contact your service provider for details and
availability.
to cancel your selection and exit this
113
Setup
Tentativ
R-UIM Setup
Messages
Menu 9-0
When you subscribe a network, you are provided the
CHV code, which is a password for use of the UIM
card. Using this menu, you can enable the CHV code
to avoid using the phone by the unauthorized user.
Also, you can change the code as you want.
The following options are available:
Enable CHV: activates use of the CHV code. With
the code enabled, you must enter your
CHV code each time you switch the
phone on. Consequently, any person
who does not have the code cannot
use your phone without your approval.
Disable CHV: deactivates use of the CHV code. Any
person can access the data in your
UIM card.
Change CHV: allows you to change the CHV code as
your preference. Enter a new code up
to 8 digits. Then, enter the new code
again when prompted for
confirmation.
Your phone can receive voicemail notification, text
messages, and pages. Also, your phone can send
text messages and pages if your system supplier
provides this service.
Incoming messages are received even when your
phone is in Lock mode. However, the screen will not
display information about the message. To access
the message, or to return a call other than an
emergency or priority number, unlock the phone to
proceed.
If you are on a conversation, and you receive an
incoming message, your phone automatically mutes
the ringer (this is to avoid ringing in your ear while
you are trying to converse).
To enter the Message menu, press
mode.
in Standby
New Message
OK-1
You can create short text messages to send to other
mobile numbers.
1. Enter the phone number, and press
You can recall the phone number from your
Phonebook or enter an e-mail address to send a
web message. Press
and select e-mail to
enter e-mail address or Phonebook to recall a
number from Phonebook.
114
115
Messages
2. Press
when the Message field is active. A
separate Enter message screen appears. Enter the
desired message content. For further information on
how to enter text, see page xx.
3. If necessary, press
to go to the Call back
number field to change the number to which the
recipient of your message will call back to send you
a reply message and press . Enter the desired
number and press .
The call back number is set to your phone number
by default.
4. If necessary, press
to go to the Options field
to set the message options and press . Press
or
to move through the options and
or
to change the setting of the selected option.
A brief description on the selected option and its
current setting displays at the bottom of the screen.
The following options are available:
• Message Priority: allows you to set the priority
level of the message. Normal, Interactive,
Urgent and Emergency are available.
• Privacy: allows you to keep your message from
accessing by unauthorized person. If you have set
this option to Restricted, Confidential, or
Secret, the recipient must enter his/her lock
code to read your message.
Messages
• Deferred Delivery: allows you to select when
the message is delivered.
• Delivery Acknowledge: allows you to activate
or deactivate the delivery acknowledgement
feature. When this is activated (set to Request
Ack), the network informs you whether your
message has been read or not by the recipient.
• Save sent message: allows you to set whether
you want the transmitted message to be saved in
Outbox or not. Selecting Save Outbox will save
the message after transmission.
5. When the setting is completed, press
to
highlight Confirm to use the currently selected
settings for this message and press
If you want to cancel your settings and use the
default setting, select Revert.
6. Press
to move to the Done field and press
The display asks you to select an action for the
message.
7. Press
to send the message without storing.
Press
to save the message in Outbox.
Press
to go back to edit the message.
Press
to discard the message and return to
Standby mode.
• Validity Period: allows you to the length of time
for which your message will be stored at the
message center while attempts are made to
deliver it to the recipient.
116
117
Messages
Messages
Using Canned Messages
Voice
When entering the message contents, you can use
the messages pre-stored in your phone.
Press
or
to scroll to the desired of the
mails in the list and press
. The phone plays
back the voice mail.
1. Press
while entering message.
2. Select Canned from the pop up list and press
3. Select desired one from the canned messages
using
or
and press .
4. The selected message appears in display. Edit it or
add more text to it as needed for sending.
Inbox
Tentativ
Press
or
to scroll to the desired one of the
messages in the list and press . The phone
displays the message contents. If necessary, press
or
to scan through the contents.
While viewing a message, press
following options.
OK-2
Your phone can store up to 95 messages until the
total length of the message exceeds 16 kbytes. This
storage capacity includes all message types: numeric
page, VMN (Voicemail Notification), text and browser
message. If your message memory gets full, the
screen displays a text notification and rejects
additional incoming messages until you erase the
stored messages.
Note: When the phone receives a message, an alert
sounds, a text notification with the call back number
and memory used for the message displays.
Press
(or
) to view (or listen to) the
message.
118
Text
to access the
Call back: places a voice call to the call back
number of the message.
Forward: allows you to send the message to the
other person.
Save addr: allows you to save the sender’s phone
number into your Phonebook. For further
information on storing a number, see
page xx.
Erase: erases the message.
Detail: displays detailed information on the
messages, such as the date and time when
the message was delivered from the sender’s
phone and received by your phone and the
used language. If needed, press
or
to scan through the contents.
119
Messages
Messages
Reply: allows you to send a reply message to the
sender.
Save cb#: allows you to save the call back number
of the message.
Web
Press
or
to scroll to the desired one of
the messages in the list and press . The phone
start the Web browser displays the message
contents. If necessary, press
or
to scan
through the contents.
While viewing a message, press
following options.
to access the
Outbox
OK-3
Your phone can store up up to 95 transmitted
messages until the total length of the message
exceeds 16 kbytes. You can review or resend the
messages stored in Outbox, if needed.
When you enter the Outbox menu, you can see the
message list. The marker ! next to the message
means that it is urgent.
Press
or
to scroll to the desired message
and press
to review the message. The display
shows the date and time when the message is
created, the designated number (and name if saved
in Phonebook) and message contents.
If necessary, press
contents.
or
to scan through the
While reviewing a message, press
following options.
to access the
Call: places a voice call to the designated number.
Re-send: allows you to resend the message. For
further information on sending a message,
see page xx.
Save addr: allows to save the designated number
into your Phonebook. For further
information on storing a number, see
page xx.
Erase: erases the message from Outbox.
120
121
Messages
Messages
Detail: displays detailed information on the
message, such as the date and time when
the message is transmitted or created and
the option settings. If needed, press
or
to display more contents.
MSG Setup
OK-4
Using this menu, you can set up the various options
for the message. Also, you can erase all incoming or
outgoing messages.
New Message
You can set up the following options as default
setting when creating a new message. For further
information on the options, see page xx.
Call Back #: You can set the call back number. Your
phone number is preset at factory.
Save Message: You can set the Save sent message
option to On or Off.
Entry Method: You can select the text input mode
between Word and Alphabet (ABC).
General
Delivery Ack: You can set the Delivery
Acknowledge option to Yes or No.
You can set up the following options for incoming
messages.
Canned Msg.: Your phone has 10 preset messages
for use when creating a message.
You can edit the preset message as
needed. Press
or
to scan
through the message list, and when
the desired one is highlighted, press
to edit it. For further information
on entering text, see page xx.
Scroll Timer: If an incoming message is too long for
the display, the phone displays it by
scrolling the screen automatically. You
can set the time when the phone
scrolls to the next screen. Selecting Off
does not scroll automatically. You
should scroll to next screen manually
using
or
Msg.Remind: When a message is received, the
phone alerts you by the selected ring.
You can set how often you want to be
alerted. Selecting Off does not alerts
you the incoming message, but the
New Message icon
will appear.
122
Erase
Using this menu option, you can erase all messages
in each of three message boxes; Voice mail box,
Inbox and Outbox.
You can also erase all of the messages at one time.
123
Web
Launching the Web Browser
Your phone comes equipped with a Web browser
which makes it possible for you to use the Wireless
Web.
The Web browser allows you to access certain
information such as stock quotes and weather via
the Internet. Browsing the web via the phone is not
like using your home computer. Site providers have
selected only the critical aspects of their site to
present to wireless phone users, and have removed
most graphics.
Each time you start the Web browser, the phone will
connect to the PCS Nationwide Network as
necessary, and the service indicator icon ( ) will
appear on the display. Any time the service indicator
icon is visible on the display, your phone is
connected to the PCS Nationwide Network and you
will be billed accordingly. Rates will vary according
to your billing plan.
The Web browser will end the connection after a
certain period of network inactivity and will
automatically re-connect as necessary. For this
reason, you may find that you are billed for several
network connections within a single Web browser
session. This is normal and is designed to minimize
your bill.
To enter the Web menu, press
mode.
124
Web
Tentativ
in Standby
Note: The first time you use the web browser, you
will go through a security setup process that takes
3 to 5 minutes. Please follow the on-screen
prompts to complete the security setup process.
This initial setup process occurs only the first time
you access the service.
1. When Get In Web is highlighted, press
start the Web browser.
to
A reminder of the charge depending on your
setting in the Prompt menu option (see page xx)
may appear. Answer YES or NO by pressing
or
respectively.
2. Once connected, the Home page (or the last page
visited) will be displayed. To access the Home
menu page from any other menu in the web
browser, press and hold
An example of a Home Page is shown below:
1.❿My VZW
2. Websites
3. Hopspots
4. Portals
5. Customer Care
6. Shopping
7. Messaging
8. GoTo Bookmark
What appears on the display when accessing the
web browser is dependent on the service provider
content. To view additional contents, press
125
Web
Web
Note: You can quickly access the web browser
menu by pressing and holding down
in
Standby mode.
You can act on the options or links by making use of
the soft keys. The soft keys (
and
) are
located below the bottom line of the display.
Exiting the Web Browser
Here’s how the keys work in the web browser:
Simply press
menu.
or close the phone to exit the Web
If your phone asks if you want to exit the browser
depending on your setting in the Prompt menu
option (3-2), answer YES pressing
Using the Soft Keys
At the bottom of the browser display is a solid bar
which contains browser commands.
or below
the solid bar are used to execute the commands.
These two keys are called “Soft keys” because their
function changes depending on where you are in the
web browser.
Navigating the Web
When you use the web browser, some keys on your
phone operate differently than on a normal phone
call. These keys are explained below.
The browser presents on-screen items in one of the
following ways:
• Text or numeric input
• Links (embedded in content)
• Numbered options (some options may not be
numbered)
• Simple text
126
Use to scroll through the browser options
The currently selected option is indicated
by “❿”. You can also use these keys to
move the cursor when editing text.
This is the left soft key. For more
information, see “Using the Soft Keys” on
page xx. This key is also used to access the
secondary options or a menu of secondary
options.
This is the right soft key. For more
information, see “Using the Soft Keys” on
page xx. This key is also used to primarily
for selecting the highlighted item.
• Backs you up in the browser. Pressing it
once backs you up one page. Pressing
and holding it backs you up to the Home
page.
• Clears out entered text or numbers.
When entering numbers or text, press
this key to clear the last number, letter,
or symbol. Press and hold the key to
completely clear the input field.
Use to exit the Web browser and return the
phone to Standby mode.
127
~
Web
Web
If the items on a page are numbered, you can
use these keys to select them.
Use to change the case in a text entry.
Moves the cursor left in a text entry to insert
a space.
Allows you to scroll up or down by a page.
Press and hold the up portion for one second
to back up one level in the browser.
Press and hold the down portion for one
second to go to your home page.
Entering Text, Numbers or Symbols
When you are prompted to enter text, the current
text entry method will appear on the right soft key as
Word, ABC, Symbol or 123. To change the input
mode, use the right soft key. For further information
on entering text, see page xx.
Initializing a Call from the Web browser
You may initiate a phone call from the Web browser if
the site you are using supports this feature (the phone
number may be highlighted and the left soft key will
appear as “Call.”). Pressing the Call soft key will dial
the number In most cases, you can also use
to call the number. The internet connection will
be terminated when you initiate the call. After you
end the call, your phone returns to Standby mode.
Using Bookmarks
You can bookmark many individual pages for easy
access at a later time. Bookmarks save you time by
reducing the number of steps it takes to access a
desired page.
To Create a Bookmark:
1. Go to the page that you want to mark, and press
and hold
. A list of options appears.
2. Select Mark Site.
Using the Links
Links have several purposes, including jumping to a
different page, jumping to a different site, or even
initiating a phone call from some sites. Links are
shown inside of brackets ( [ ] ) , and you can normally
use the left soft key to select a link when it is
highlighted.
128
3. If the page has a title, it will be automatically used
for the name of the bookmark. You can also change
the bookmark name. Selecting Save will save the
name and add the page to your list of bookmarks.
4. A message will appear confirming that the
bookmark was added to the list. Select OK to
return to the screen that you marked to resume
navigation within the Web browser. The new
bookmark is added to the bottom of your bookmark
list.
129
Web
Reference Information
To Find a Bookmark:
From the home page, select Bookmarks and select
the bookmark you want by pressing
or
and press
Using the Batteries
Or, from the home page, press and hold the number
associated with the bookmark in the bookmark list.
Your phone is powered by a rechargeable Li-ion
standard battery.
Setting a Web Prompt
Precautions When Using Batteries
Your phone can be set to prompt you to confirm your
selection each time you start or end a MiniBrowser
session. Depending on this setting, your phone
display a reminder that you will be billed for the
connection time when accessing the wireless web
and a confirming message when exiting the browser.
You have the option to change when the prompt is
displayed.
1. Press
or
to scroll to Prompt, and press
. The following options are available:
• To Start : The default setting. You will see the
prompt when you enter the browser, but not
when you exit it.
• None: You will never see the prompt.
• Both: You will be prompted when you enter or
exit the browser.
• To End: You will see the prompt only when you
exit the browser.
2. Find the desired option using
press
130
or
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby times
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging times depend on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time
to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
and
131
Reference Information
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-approved
chargers. When a charger is not in use, disconnect
it from the power source. Do not leave the battery
connected to a charger for more than a week,
since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and life-time of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental short
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and - terminals of the battery (metal strips
on the back of the battery), for example when
you carry a spare battery in a pocket or bag.
Short-circuiting the terminals may damage the
battery or the object causing the short-circuit.
Reference Information
Safety Information
Road Safety
• Remember, road safety always comes first!
• Do not use a hand-held phone while driving a
vehicle. Always park the vehicle before having a
conversation.
• Make sure that the phone is stored safely and will
not fall or be broken in the event of a collision or
emergency stop.
• The use of an alert device to operate a vehicle’s
lights or horn on public roads is not permitted.
• Only qualified personnel should install or service
the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the unit.
• Electronic fuel injection, anti-skid braking,
electronic cruise control or any other electronic
systems may malfunction due to the lack of
protection from radio signals. Check regularly that
all cellular phone equipment in your vehicle is
mounted and operating correctly.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
132
133
Reference Information
Operating Environment
• Remember to follow any special regulations in
force in any area and always switch off your
phone whenever it is forbidden to use it, or when
it may cause interference or danger (in a hospital
for example).
• Operation of any radio transmitting equipment,
including cellular phones, may interfere with
inadequately protected medical devices. Consult
a physician or the manufacturer of the medical
device if you have any questions. Other electronic
equipment may also be subject to interference.
• As with other mobile radio transmitting equipment,
you are advised that for satisfactory operations
and personal safety, the equipment should only be
used in the normal operating position.
• The effect of the transmit/duty cycle on hearing
aids and pacemakers is being investigated, and
there is potential hazard associated with use
close to such personal medical electronic devices.
• Always switch off the phone when at a refuelling
point (service station). You are reminded of the
need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and
distribution areas), chemical plants or where
blasting operations are in progress.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
134
Reference Information
• Switch off your cellular phone when in an aircraft.
The use of cellular phones in an aircraft is illegal
and may be dangerous to the operation of the
aircraft or disrupt the cellular network. Failure to
observe these instructions may lead to the
suspension or denial of cellular telephone
services to the offender, legal action or both.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill the warranty
obligations and enjoy this product for many years.
• Keep the phone and all its parts and accessories
out of the reach of small children.
• Keep the phone dry. Precipitation, humidity and
liquids containing minerals will corrode the
electronic circuits.
• Do not use or store the phone in dusty, dirty areas
as its components may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up (to its normal temperature),
moisture can form inside the phone, which may
damage the electronic circuits.
135
Reference Information
Glossary
• Do not attempt to open the phone. Non-expert
handling of the phone may damage it.
• Do not drop or knock the phone. Rough handling
may damage the internal circuits.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in mild, soapy
water.
• If the phone or any of its accessories are not
working properly, take them to your nearest
qualified service centre. The personnel there will
assist you, and if necessary, arrange for the phone
to be repaired.
Emergency Calls
Important! This phone, like any cellular phone, uses
radio signals, cellular and landline networks, as well
as user-programmed functions that cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any cellular phone
for essential communications (medical emergencies
for example).
Remember, to make or receive any calls, the phone
must be switched on and in a service area with
adequate cellular signal strength.
Emergency calls may not be possible on all cellular
phone networks or when certain network services
and/or phone features are in use. Check with local
cellular service providers.
136
Airtime - Actual time spent talking on the wireless
phone. Most carriers bill customers based
on how many minutes of airtime they use
each month.
Antenna - A device for transmitting or receiving
signals. The size and shape of antennas
is determined, in part, by the frequency of
the signal they receive. Wireless phones
and the base station must have antennas.
Base Station - The fixed radio transmitter/receiver
that maintains communications with
mobile radio telephones within a
given area. (Typically called a cell or
cell site)
CDMA - (Code Division Multiple Access) A spreadspectrum approach to digital transmission.
With CDMA, each conversion is digitized
and then tagged with a code. The mobile
phone deciphers only a particular code to
pick the right conversation off the air. The
transmitted signal is just above noise level
across the available bandwidth.
Channel - Communications signals transmit along
paths called channels.
Codec - Compression & Decompression.
Deactivation - The process of rendering a wireless
phone inactive.
137
Glossary
DTMF - (Dual-tone Modulated Frequency ) You send
DTMF signals when you enter numbers by
pressing the digit keys.
EVRC - (Enhanced Variable Rate Codec) EVRC is a
new global standard for compressing and
decompressing voice signals. EVRC uses a
lower bit rate (the number of bits sent per
second) than existing CDMA vocoders, while
providing significant improvements in voice
quality. This technology enables your phone
to provide superb voice quality while
benefiting from the ability to process more
cellular voice calls using less bandwidth than
the voice codecs in CDMA networks today.
Frequency - A measure based on time, as one or
more waves per second, in an electrical
or light wave information signal. A
signal’s frequency is stated in cyclesper-second or Hertz (Hz).
LCD -(Liquid Crystal Display) Commonly used to
refer to the screen display on the wireless
phone.
Glossary
LED - (Light Emitting Diode) Commonly used to refer
to a small light on the wireless phone.
The LED lights on the phone to indicate
an incoming call. The lights on the charger indicate
that battery charging is taking place.
Prepend - The addition of a prefix, such as an area
code, to a phone number.
RF - Radio Frequency
Roaming - The ability to use a wireless phone to
make and receive calls in places outside
of the home service area.
Service Charge - The amount paid each month to
receive wireless service.
Standby Time - The amount of time a fully charged
wireless portable or transportable
phone can be on and idle without
being in use. (See Talk Time)
Talk Time - The length of time a person can talk on
a portable or transportable wireless
phone without recharging the battery.
Vocoder - Voice Coder. A device used to convert
speech into digital signals.
Wireless - Radio-based Systems that allow
transmission of telephone or data signals
through the air without a physical
connection, such as a metal wire
(copper) or fiber optic cable.
138
139

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2001:08:23 17:26:49-03:00
Create Date                     : 2001:08:23 17:26:21-03:00
Title                           : attachments.PDF
Subject                         : 
Author                          : Unknown
Creator                         : Microsoft Word
Producer                        : Acrobat PDFWriter 3.02 for Windows
Page Count                      : 71
Mod Date                        : 2001:08:23 17:26:49-03:00
Creation Date                   : 2001:08:23 17:26:21-03:00
Metadata Date                   : 2001:08:23 17:26:49-03:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools