Samsung Electronics Co SCHA595 Dual-Mode Cellular Phone (AMPS/CDMA) User Manual SCH A595 FCC
Samsung Electronics Co Ltd Dual-Mode Cellular Phone (AMPS/CDMA) SCH A595 FCC
Users Manual
ELECTRONICS
World Wide Web
http://www.samsungmobile.com
SCH-A595
User’s Manual
Printed in Korea
Código No.: GHxx -xxxxxA
English.02/2002.Rev.1.0
Please read this manual before operating your phone, and keep it
for future reference.
Draft version (2002.02.08)
This manual is made from SCH-A475
manual only by changing the pictures.
The contents will be updated when
the software is fixed.
For more information about RF exposure, please visit the FCC website at www.fcc.gov
FCC RF EXPOSURE INFORMATION
In August 1996 the Federal Communications Commission
(FCC) of the United States with its action in Report and Order
FCC 96-326 adopted an updated safety standard for human
exposure to radio frequency electromagnetic energy emitted
by FCC regulated transmitters. Those guidelines are
consistent with the safety standard previously set by both U.S.
and international standards bodies. The design of this phone
complies with the FCC guidelines and these international
standards.
Use only the supplied or an approved antenna. Unauthorized
antennas, modifications, or attachments could impair call
quality, damage the phone, or result in violation of FCC
regulations.
Do not use the phone with a damaged antenna. If a damaged
antenna comes into contact with the skin, a minor burn may
result. Please contact your local dealer for replacement
antenna.
Body-worn Operation
This device was tested for typical body-worn operations with
the back of the phone kept 1.5 cm. from the body. To
maintain compliance with FCC RF exposure requirements,
use only belt-clips, holsters or similar accessories that
maintain a 1.5 cm. separation distance between the user’s
body and the back of the phone, including the antenna,
whether extended or retracted. The use of belt-clips, holsters
and similar accessories should not contain metallic
components in its assembly. The use of accessories that do
not satisfy these requirements may not comply with FCC RF
exposure requirements, and should be avoided.
WARNING! Read this information before using your phone
1
SAFETY QUICK GUIDE ..................................................................... 5
UNPACKING ...................................................................................... 7
YOUR PHONE
Phone Layout ...................................................................................... 8
Display .............................................................................................. 11
Service light ...................................................................................... 13
GETTING STARTED
Installing a Battery ............................................................................. 14
Charging a Battery ............................................................................. 15
Low Battery Indicator ..................................................................... 16
Switching the Phone On/Off ................................................................ 17
Your Phone’s Mode ............................................................................ 18
CALL FUNCTIONS
Making a Call ..................................................................................... 20
Answering a Call ................................................................................. 28
In-Call Options .................................................................................... 29
Using Caller ID .................................................................................... 30
Viewing Missed Calls ........................................................................... 31
Three-Way Calling ............................................................................... 32
Call Waiting ........................................................................................ 33
Call Forwarding .................................................................................. 33
Adjusting the Volume ........................................................................... 34
ENTERING TEXT
Changing Text Input Mode ................................................................... 36
T9 Mode .............................................................................................. 37
ABC Mode ........................................................................................... 39
Symbol Mode ...................................................................................... 41
Number Mode ..................................................................................... 41
Table of Contents
2 3
USING THE MENUS
Accessing Menu Functions by Scrolling .................................................. 42
Accessing Menu Functions by Using its Shortcut...................................... 42
List of Menu Functions ......................................................................... 44
CALLS
Outgoing (MENU 1-1) ................................................................... 46
Incoming (MENU 1-2) ................................................................... 47
Missed (MENU 1-3) ........................................................................ 47
Erase History (MENU 1-4) .............................................................. 47
Air Time (MENU 1-5)...................................................................... 48
PHONE BOOK
Find (MENU 2-1) ........................................................................... 49
Add (MENU 2-2) ........................................................................... 50
Rename (MENU 2-3) ..................................................................... 53
My Phone # (MENU 2-4) ................................................................ 53
Memory (MENU 2-5) .................................................................... 53
MESSAGES
New Messages (MENU 3-1) ............................................................. 54
Voice (MENU 3-2)........................................................................... 56
Inbox (MENU 3-3).......................................................................... 57
Outbox (MENU 3-4) ....................................................................... 58
Filed Msg (MENU 3-5) .................................................................... 59
Web Alert (MENU 3-6).................................................................... 59
Erase Message (MENU 3-7) ............................................................ 60
Msg Settting (MENU 3-8)................................................................ 60
WEB
About Web Browser ............................................................................ 62
Get in Web (MENU 4-1) ................................................................. 63
Exiting the Web Browser .................................................................... 63
Using the Web Browser Soft Keys ....................................................... 64
Navigating the Web Browser .............................................................. 64
Entering Text, Numbers or Symbols in the Web Browser ...................... 66
Prompt (MENU 4-2) ........................................................................ 66
PLANNER
Today (MENU 5-1) ........................................................................ 67
View Month (MENU 5-2) ............................................................... 68
Jump To Date (MENU 5-3) ............................................................ 70
To Do List (MENU 5-4) .................................................................. 70
Memo Pad (MENU 5-5) ................................................................. 71
Count Down (MENU 5-6) ............................................................... 72
Alarm Clock (MENU 5-7) ............................................................... 73
World Time (MENU 5-8) ................................................................ 74
Calculator (MENU 5-9) .................................................................. 74
VOICE
Voice Dial (MENU 6-1) .................................................................. 75
Voice Memo (MENU 6-2) ............................................................... 78
Voice Answer (MENU 6-3)............................................................... 79
SOUNDS
Ringer Vol (MENU 7-1) ................................................................. 82
Ringer Type (MENU 7-2) ............................................................... 83
Tone Length (MENU 7-3) ............................................................... 83
Alerts (MENU 7-4) ........................................................................ 84
Roam Ringer (MENU 7-5) .............................................................. 85
DISPLAY
Animation (MENU 8-1) ................................................................. 86
Greeting (MENU 8-2) .................................................................... 87
Backlight (MENU 8-3) ................................................................... 87
Contrast (MENU 8-4) .................................................................... 88
Auto Hyphen (MENU 8-5) ............................................................. 88
Dual Clock (MENU 8-6) ................................................................. 88
GAMES ............................................................................................... 89
5
Safety Quick Guide
Read these guidelines before using your wireless phone.
Failure to comply with these guidelines may be
dangerous or illegal. For more detailed safety
information, see “Health and Safety Information” on
page 99.
Road safety comes first
Do not use a hand-held phone while driving; park the
vehicle first.
Switch off when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off on aircraft
Wireless phones can cause interference. Using them on
aircraft is both illegal and dangerous.
Switch off in hospital
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may get interference which could
affect performance.
Respect special regulations
Follow any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger
(in a hospital for example).
4
SETUP
Auto Answer (MENU 0-1) .............................................................. 90
Answer Mode (MENU 0-2) ............................................................. 90
Auto Retry (MENU 0-3) ................................................................. 91
Language (MENU 0-4) .................................................................. 91
Set Time (MENU 0-5) .................................................................... 91
Set NAM (MENU 0-6) ................................................................... 92
Set System (MENU 0-7) ................................................................. 92
Data/Fax (MENU 0-8) .................................................................. 93
Version (MENU 0-9) ...................................................................... 95
Security (MENU 0-0) ..................................................................... 95
HEALTH AND SAFETY INFORMATION
Precautions When Using Batteries ........................................................ 99
Road Safety ...................................................................................... 101
Operating Environment....................................................................... 103
Electronic Devices .............................................................................. 103
Potentially Explosive Atmospheres ...................................................... 105
Emergency Calls ................................................................................ 106
Other Important Safety Information.................................................... 107
Care and Maintenance........................................................................ 108
GLOSSARY ......................................................................... 110
INDEX................................................................................ 113
QUICK REFERENCE CARD..................................................... 117
76
Use sensibly
Use only in the normal position (to ear). Avoid unnessary
contact with the antenna when the phone is switched
on.
Accessories and batteries
Use only SAMSUNG-approved accessories and
batteries.
Use qualified service
Only qualified service personnel may install or repair
your phone.
Desktop Charger
Handset Battery
User’s Manual
Hand strap
Unpacking
Your package contains the following items.
9
GGeettttiinngg SSttaarrtteedd
8
YYoouurr PPhhoonnee
Enters the menu facility. Also, scrolls
through the menu options.
In the menu facility, scroll through the menu
options and phonebook memory.
In Standby mode, enters the Find menu,
enters the Ring Tone menu, enters
the Voice Memo menu and launches the
Web browser.
Key Functions
Service light
Antenna
In the menu facility, selects a menu function
or stores information that you have entered
(such as a name) in the phone memory.
When entering a number, saves the number
to the PhoneBook.
In Standby mode, enters the Mail Kit menu.
Microphone
Earpiece
Main Display
Your Phone
Phone Layout
The following illustrations shows the main elements of
your phone.
External Display
Volume Key
Rear View
Closed View
Earphone jack
11
GGeettttiinngg SSttaarrtteedd
10
GGeettttiinngg SSttaarrtteeddYYoouurr PPhhoonnee
Display
Layout
The display comprises two areas; an upper line of fixed
icons, and the lower text and graphic area. The
following icons display at power-on:
Icons
Text and
graphic area
Signal strength : Shows the received
signal strength. The greater the number of
bars, the better the signal strength.
Icons
Service: Appears when a call is in
progress.
No service indicator: Appears when you
are outside a service area. When it
appears, you cannot make or receive calls.
YYoouurr PPhhoonnee
Enters numbers, letters and some special
characters.
In Standby mode, initiates a voice dial calls
when pressed and held down.
Also, use this key for special star calling
feature.
In Standby mode, toggles the silent mode
on and off when pressed and held.
Also, it is used at various times when you
dial especially when using tele-services.
Key Functions
(continued...)
Alarm on: Appears when you set an alarm.
During a call, adjusts the voice volume.
In Standby mode with the phone open, adjusts
the ringer volume.
In the menu facility, scrolls through the menu
options.
Ends a call. Also switches the phone on and
off when pressed and held.
In the menu facility, returns to Standby mode
and cancels your input.
Makes or answers a call.
In Standby mode, redials the last outgoing
number when pressed twice.
Deletes characters from the display.
In the menu facility, returns to the previous
menu level.
13
GGeettttiinngg SSttaarrtteedd
12
GGeettttiinngg SSttaarrtteeddYYoouurr PPhhoonnee
Backlight
The display is illuminated by a backlight. When you
press any key, the backlight illuminates. It turns off if no
key is pressed within a given period of time, depending
on the Backlight option set in the Display menu. The
backlight remains on at all times when the phone is
connected to a car kit (optional).
To specify the length of time for which the backlight is
active, set the Backlight menu option (8-3); see page
87 for further details.
External Display
Your phone has an external display on the cover. It also
shows Signal strength, Vibrator, and Battery Strength
icon. It indicates that you have an incoming call or
message, missed calls and alarms you at the specified
time when you set an alarm.
When you press and hold the volume key with the
phone closed, the backlight of the external display
illuminates.
Service Light
The service light is at the top left of the phone. It
flashes to indicate incoming call or message. Also, the
service light flashes for a few seconds when you turn on
the phone.
YYoouurr PPhhoonnee
New Message: Appears when a new text
message has been received.
Silent mode On: Appears when the Silent
mode is activated.
Roaming: Appears when you are out of your
home area and have registered with a
different network (when travelling in other
countries, for example).
Vibrator on: Appears when a vibrate mode
is on. An incoming call will vibrate the
phone rather than ring it.
Digital mode: Indicates a Digital mode.
1X mode: Indicates 1X mode.
Analog mode: Indicates an Analog mode.
Battery strength: Shows the level of your
battery. The more bars you see, the more
power you have left.
15
GGeettttiinngg SSttaarrtteedd
Charging a Battery
The travel adaptor allows you to charge your phone’s
battery from any 110 volt AC standard wall outlet. Also,
using the travel adaptor allows you to make a phone call
while the battery is charging. The travel adaptor will fully
charge an “empty” standard battery in approximately 4
hours.
Follows these steps:
1. With the battery in position in the phone, atach the
cord form the travel adaptor by plugging it into the
adaptor outlet at the bottom of the phone.
2. Connect the adaptor to a wall outlet. The battery will
begin charging immediately, and the service light will
light and remain red while the battery icon animates.
3. The service light indicates the status of the battery
being charged.
• Red:the battery is charging.
• Green:the battery is fully charged.
• Yellow:the battery is not plugged in correctly or
operating at a temperature that is too high or
too low. Please check the adaptor and/or
battery.
4. When charging is finished (The light turns green),
disconnect the adaptor from the power outlet and
from the phone.
Note: You can make a call at your convenience when
the phone is plugged into the adaptor. The adaptor will
continue to charge the battery even when you are
making the call.
14
Getting Started
Installing Battery
Your Samsung phone comes packaged with a partially
charged, rechargeable Lithum Ion (LiIon) battery.
To install the battery, place the battery back on the
phone. Slide the battery up towards the catch until it
locks into the place.
To remove the battery, do as follows:
1. If necessary, switch off the phone by holding down
until the closing animation plays.
2. Push up and hold the catch above the battery on the
back of the phone and lift the battery away.
17
GGeettttiinngg SSttaarrtteedd
16
GGeettttiinngg SSttaarrtteedd
Switching the Phone On/Off
Hold down for more than one second to switch
the phone on.
The service light on the phone flashes, and an alert
sounds. When the system locates services, the greeting
message displays along with the date and time.You can
now place and receive calls.
If the phone is out of service, the icon appears in
the display. In this case, you cannot make and receive
calls. You can try again later when service is available.
Note: You can change the LCD display language. To
change the language, use the Language menu option
(0-4); for further details, refer to page 91.
When you wish to switch the phone off, hold down
for more than two seconds.
WARNING!
Do not switch on the phone when the mobile phone
use is prohibited or when it may cause interference or
danger.
Note: Your phone has a built-in antenna. As with any
other radio-transmitting device, do not touch the
antenna unnecessarily when the phone is switched
on. Contact with the antenna affects call quality and
may cause the phone to operate at a higher power
level than otherwise needed.
Low Battery Indicator
You can easily tell if your battery needs to be recharged
by checking the battery strength indicator in the
upper-right corner of your phone’s display. The presence
of all three bars indicates a full charge, two bars
indicates a smaller charge, and one bar indicates an
even smaller charge. No bars (the battery icon is empty)
means your battery must be charged.
When the battery charge level gets low, the battery
sensor blinks an empty battery icon ( ), sounds a
tone. If the battery level gets too low, the phone will
turn off automatically. Unfortunately, if this happens
you’ll lose whatever you are doing, including dropping
your call. Watch the battery strength icon and make sure
your battery is adequately charged.
19
GGeettttiinngg SSttaarrtteedd
18
GGeettttiinngg SSttaarrtteedd
Power Save Mode
Your phone comes with a Power Save feature that will
automatically be activated if your phone is unable to
find a signal after 10 minutes of searching. While this
feature is active, the phone’s battery charge will
conserved. The phone will automatically recheck for a
signal periodically. To manually force the phone recheck
for a signal, press any key. A message on the display let
you know when your phone is operating in Power Save
Mode.
Your Phone’s Mode
Standby Mode
Standby is the most basic state of your phone. The
phone goes into Standby mode soon after you turn it on,
or whenever you briefly press . When your phone is
in Standby mode, you will typically see the greeting
message and current date and time. If you enter a phone
number, you can press to dial it, or press to
save it in the internal phone book.
Press at any time to return to Standby mode. Be
careful; if you are on a call when you press , you
will return to Standby mode, but it also disconnects the
call. Press several times or hold it down to return
to Standby mode without ending the call.
The Main Menu is accessed when you are in Standby
mode.
Talk Mode
You can place and answer calls only when your phone is
turned on. During a call, the phone is in Talk mode.
While you are in Talk mode, pressing gives you a
list of options referred to as “In-Call Options.” See page
29 for details on the options.
2120
Redialing the Last Call
To redial the last call you made, press twice
quickly.
Your phone stores the last 10 incoming or outgoing
calls. To recall any of these numbers, proceed as
follows.
1. If there are any characters on the display, clear the
display by holding down for more than one
second.
2. Press . The list of outgoing calls are displayed.
3. Use or to scroll through the list until you
select the required name or number.
4. Press to dial the number displayed.
Emergency Dialing
You can place emergency call from your priority number
list even if your phone is locked or all outgoing calls are
restricted. For further information on emergency
numbers, refer to page 97.
CCaallll FFuunnccttiioonnss
Call Functions
Making a Call
In Standby mode, key in the area code and phone
number and press .
Note: If you have set Auto Retry option (0-3) to On (see
page 84), and the line is busy or the remote
person does not answer you, the phone
automatically retries to make the call.
Correcting the Number
To clear ... Then ....
The last digit displayed Press .
The whole display Hold down for more
than one second.
Ending a Call
When you have finished your call, briefly press or
close the phone.
If you press , the call time (length of the call)
displays briefly and the phone returns to Standby mode.
22
Prepend Dialing
The prepend option lets you add digits such as area
codes and network feature activation codes to a phone
number that is in your Internal Phone Book or Call Logs.
To prepend existing phone numbers in the Phone Book or
Call Logs:
1. Access the phone number entry.
2. When the desired phone number displays, press
to access the Options menu.
3. Press ( in Call Logs) to select the
Prepend option.
4. Enter the area code or feature code.
5. Press to dial the number.
Making a Call from the Phone Book
You can store the phone numbers called regularly in
memory, called the Phone Book. You then simply recall
the number to dial. For further information on Phone
Book, refer to page 49.
CCaallll FFuunnccttiioonnss
23
CCaallll FFuunnccttiioonnss
Speed Dialing
Once you have stored phone numbers in the phone book
memory, you can dial them easily whenever you want.
You can dial the stored phone number automatically
without pressing . See below.
One-Touch Dial
Memory locations 01 through 09 are special one-touch
locations. You can dial the phone numbers stored in the
Phone Book memory from 01 through 09 simply by
pressing one button.
Press and hold the third digit of the memory location
containing the number to be dialed.
For example: Location no. 009
Press and hold.
The number (and name) stored is displayed, then dialed.
Two-Touch Dial
Memory locations 10 through 99 are special two-touch
locations.
Press the second digit briefly, then hold down the third
digit of the memory cell.
For example: Location no. 023
Press briefly and hold down .
The number (and name) stored is displayed, then dialed.
25
CCaallll FFuunnccttiioonnss
24
CCaallll FFuunnccttiioonnss
Storing Pauses in a Phone Book Entry
To store a number in your Phone Book that contains
pauses:
1. Enter the phone number you want to store (such as
the bank’s tele-service phone number).
2. Press . The pause menu options display.
3. Use the navigation key to highlight one of the three
pause menu options offered.
4. Press to select an option. Continue entering the
number and using to enter pauses.
• ‘P’ pause : The letter ‘P’ displays within the nmber,
meaning that a hard apuse will occur at that point in
the calling sequence. Enter digits that need to
follow the pause.
• ‘T’ pause: Th eletter ‘T’ displays in th enumber,
meaning that a “Timed (2 second) pause will occur at
that point in the calling sequence.
• Hyphen: Places a hyphen between characters.
5. Store the number in your Phone Book as you normally
would by pressing and following the screen
prompts.
Three-Touch Dial
Memory locations 100 through 500 are special three-
touch locations.
Press the first and the second digit briefly, then hold
down the third digit of the memory cell.
For example: Location no. 123
Press and briefly, then hold down
.
The number (and name) stored is displayed, then dialed.
Note : When several numbers are saved in one
location, only the phone number which is specified with
Set Speed Dial option will be automatically dialed. For
details, refer to the Edit option under Find menu on
page 49.
Pause Dialing
When you call automated system, like banking services,
you are often required to enter a password or account
number. Instead of manually entering the numbers each
time, you can store the numbers in your Phone Book,
separated by special characters called pauses.
27
CCaallll FFuunnccttiioonnss
26
CCaallll FFuunnccttiioonnss
Voice Dialing
Before using the Voice dialing feature, you must record
the name and number in your phone using the Voice
Dial menu. For further details, see page 81.
Note: The voice dialing feature does not work when
your phone is in analog mode.
1. To place a call, press and hold , or open the
phone, depending on the Set Active menu option
(6-1-4). See page 77.
2. At the voice prompt, say the name into the
microphone.
• If the phone recognizes the name, the phone
attempts a connection.
• If the phone does not recognize the name, the
screen prompts for the name again.
• If the phone is unable to recognize the name after
two attempts, the message Cannot Recognize
Name. Please check name is displayed. Try the
call again later, or check the recorded name.
3. The phone dials the corresponding number.
Pause Dialing from a Stored Phone Book Entry
1. Dial the number from the Phone Book.
2. If you stored the number using “T” pause, simplay call
the number form the Phone Book.
If you stored the number using “P” pause, wait for
the
appropriate prompt for the number (credit card
number,
bank account number, etc.).
When prompted, press to send the DTMF
number that follows your pause.
Manual Pause Dialing
You can enter pauses manually during the dialing
process.
1. Enter the phone number of the service you want to
connect to (such as a bank’s tele-service phone
number).
2. Press . The pause menu options display.
3. Use the navigation key to highlight one of the three
pause menu options offered.
4. Press to select an option. Continue entering the
number and using to enter pauses.
3. When the number completed, press to call the
nubmer.
29
CCaallll FFuunnccttiioonnss
28
CCaallll FFuunnccttiioonnss
In-Call Options
Your phone provides a number of functions that you can
use during a call. You may not utilize all of these
functions at all times. Many of the in-call options are
network services.
Press during a call to access the following
in-call options:
Mute/Quit: allows you to switch your phone’s
microphone off, so that the other party cannot hear you.
Example: You wish to say something to another person
in the room but do not want the other party to hear you.
Calls: allows you to access the Calls menu.
Phone Book: allows you to access the Phone Book
menu.
Silent/Quit: does not transmit the key tones. It allows
you to press keys without hearing annoying key tones
during a call.
Send Tel #: Send the telephone number to the other
caller.
My Phone #: shows your phone number.
Version: allows you to view the software and hardware
version of your phone.
Note: You can also enable the Privacy mode option
during a call to make the call secure. Simply enable
the Privacy mode from the security menu while
connected to a call.
Answering a Call
When somebody calls you, the phone rings and the
phone icon is displayed in the middle of the display.
If the caller can be identified, the caller’s phone number
(or name if pre-stored in your Phone Book) is displayed.
If the caller cannot be identified, only the phone icon
appears.
1. To answer a call press .
If the Answer Mode menu (0-2) is set to By any
key, you can answer a call only by pressing any key
except for .
2. End the call by pressing .
Note: You can answer a call while using the phone
book or menu features. The current operation will be
interrupted.
31
CCaallll FFuunnccttiioonnss
30
CCaallll FFuunnccttiioonnss
Viewing Missed Calls
Your phone keeps a list of calls that you do not answer
when the phone is on and service is available. The
phone indicates a missed call by displaying a text
notification on the screen. Additionally, if caller
information is available, the screen displays the phone
number of the most recent missed call.
Press to call the displayed number, or to save
the number in Phone Book.
Dropped Calls
A dropped call can occur during a conversation in
response to a signal fade or leaving a service area. In
this case, the call ends and “Call Dropped” displays.
Press to clear the message and return to Standby
mode.
Failed Calls
A failed call can occur if your phone is out of calling
range or the network is temporarily busy. Your phone
responds to a failed call by displaying an appropriate
message: “Call Failed Out of Range” or “Call Failed
Network Busy.”
Press to clear the message and return to Standby
mode.
Using Caller ID
This feature tells you who is calling you by displaying
the caller’s number when the phone rings. If a caller’s
name and number are stored in your Phone Book, the
corresponding name is also displayed. If you call
someone who has this feature, your phone number will
be displayed on the their phone.
Note: Contact your service provider to setup the Caller
ID service.
33
CCaallll FFuunnccttiioonnss
32
CCaallll FFuunnccttiioonnss
Call Waiting
Call Waiting lets you receive a second call during
conversation. Your phone notifies you of a call waiting
by beeping an displaying “Call Waiting.”
Your phone provides the option of turning the Call
Waiting feature on and off (if you have subscribed to the
service). Call Waiting is on by default in the phone. If
you choose to have a undisturbed conversation, simply
turn off the feature for the current call.
Note: Contact your service provider to activate the Call
Waiting service.
To answer a waiting call:
1. To answer the call, press . The phone connects
the calling party, and places the current party on hold.
2. Press again to switch between two parties.
Note: If you do not respond to a Call Waiting
notification, the phone will forward the call to voicemail
or another number that you have set up. Contact your
service provider for more information.
Call Forwarding
This feature provides the option of forwarding incoming
calls to another phone number, even while your phone is
off. Activating Call Forwarding does not affect outgoing
calls made from this phone. Contact your service
provider to activate Call Forwarding.
Three-Way Calling
This feature enables you to conduct conference calls
with two separate parties at the same time. The phone
records each party into the Outgoing Calls Log. Also,
You are billed airtime for each outgoing call separately.
Note: Contact your service provider to activate Three-
Way Calling.
To place a Three-Way call:
1. During a conversation, press . The phone places
the other party on hold.
2. Enter the phone number for the third party, and then
press . The phone dials the third party.
3. When you are connected to the third party, press
again to begin your three-way call.
If one of the callers (not you) hangs up, you and
remaining caller stay connected. If you initiated the call
and you hang up first, all three parties are disconnected.
3534
CCaallll FFuunnccttiioonnss
Entering Text
When using your phone, you will need to enter text at
many times. For example, when storing a name in the
Phone Book, creating your personal greeting or
scheduling events in your calendar. You can enter
alphanumeric characters into your phone by using your
phone’s keypad.
You are provided with the following text input modes;
•T9 Word: This mode allows you to enter words with
only one keypress per letter. Each key on a
keypad has more than one letter - a single
press on could be J,K or L. The T9
mode automatically compares your key
presses to an internal linguistic database
to determine the correct word. The T9
mode requires far fewer keystrokes than
the traditional multi-tap method, ABC
mode.
•ABC: This mode allows you to enter letters by
pressing the key labeled with the desired letter
once, twice, or three times until the letter
appears on the display.
• Symbol: This mode allows you to enter special
characters.
• 123: This mode allows you to enter numbers.
Note: T9 mode supplies an appropriate language
database as your language setting menu( 0-4).
Adjusting the Volume
During a call, if you want to adjust the voice volume,
use the volume keys on the left side of the phone. Press
the key to increase and the key to decrease the
volume.
In Standby mode, you can adjust the ring volume using
the same keys.
37
EEnntteerriinngg TTeexxtt
36
EEnntteerriinngg TTeexxtt
T9 Mode
To type a word, press keys corresponding to the letters
you need. Remember the following as you are typing:
1. Press keys on the handset just once per desired letter.
For example, to enter ‘hello’, press , ,
, ,.
2. The word you are typing appears in the display. It may
change with each key press.
3. Type to the end of the word before editing or deleting
any keystrokes.
4. Complete each word with a space by pressing .
If the word that appears in the display is not the word
that you desire, press one or more times to
display alternate word choices for the keys you have
typed. (For example, ‘of’ and ‘me’ both shares the
sequence , . The phone displays the most
commonly used choice first.)
Smart Punctuations
Period, hyphen, and apostrophe are available on .
T9 applies rules of grammar to insert the correct
punctuation. Notice that is used twice in this
example to display two punctuation marks:
l e t ‘ s e a t .
Changing Text Input Mode
When you are in a field that allows characters entry,
you should notice the text input mode indicator in the
display.
You can change between T9 Word and ABC mode to
enter words. To include a symbol or number(s) between
characters, Symbol and 123 modes are also available.
To change to another text input mode;
1. Press .
2. Scroll to the desired mode by pressing navigation key.
3. To select the mode highlighted, press .
If you want to exit the menu without changing to a
new mode, press .
4. You will find the selected text input mode indicator in
the display.
39
EEnntteerriinngg TTeexxtt
38
EEnntteerriinngg TTeexxtt
ABC Mode
When typing in ABC mode, you should press key
labeled with the required letter:
-Once for the first letter
-Twice for the second letter
-And so on.
For example, you press three times quickly to
display the letter “C”, two times quickly to display
the letter “K”. So, this method is called multi-tap typing.
Refer to the table on next page for the list of characters
assigned on each key.
AB C 2
DE F 3
GH I 4
JK L 5
MN O 6
PQ RS7
TU V8
WX Y Z 9
0
(Caps Lock mode)
List of characters available:
1.@ , : ? - ; ‘ / ( ) ! # % &
*< > _ + = “ \ { } $ [ ]
Key Characters in the Order Displayed
Including a Number
You can include a number between letters without
exiting the T9 input mode. Press and hold the desired
number key.
Changing Case
Your phone offers three shift states;
• T9 Word : initial letter is capitalized
• T9 WORD : all letters are capitalized
• T9 word : all letters are lower case
Press one or more times to display the
appropriate shift indicator, and begin typing normally.
Another Usages
To move the cursor left or right through your text
message, press navigation key.
Press one or more times to clear letters to the left.
Press and hold to erase all.
41
EEnntteerriinngg TTeexxtt
40
EEnntteerriinngg TTeexxtt
Symbol Mode
Symbol mode enables you enter symbols.
Press navigation key to display more symbols.
Press keys corresponding to the desired mark, then the
phone automatically switches back to the text entry
mode used just prior to selecting the Symbol mode.
123 Mode
123 mode enables you to enter numbers. Press keys
corresponding to the desired digits, and manually switch
back to text entry mode of choice.
Another Usages
The cursor moves to the right when you press a different
key. When entering the same letter twice (or a different
letter on the same key), just wait for a few seconds for
the cursor to move right automatically, and then select
the next letter.
• Press to insert a space.
• To move the cursor left or right through your text
message, press navigation key.
• Press one or more times to clear letters to the
left. Press and hold to erase all.
Changing Case
Your phone offers three shift states;
• Abc : initial letter is capitalized
• ABC : all letters are capitalized
• abc : all letters are lower case
Press one or more times to display the
appropriate shift indicator, and begin typing normally.
Accessing a Menu Functions by Using its
Shortcut
The menu items (menu, submenus and setting options)
are numbered and can be accessed quickly by using
their shortcut number.
1. In Standby mode, press to access the main
menu.
2. Within three seconds, key in the first digit of the
shortcut number. Repeat this for each digit of the
shortcut number.
Example: Accessing the Ringer Type option
Press and .
7for Sounds, 2for Ringer Type menu function.
3. Find the setting of your choice pressing navigation
key, and then press .
Note: The numbers assigned to each menu function are
indicated on the list on page 44.
43
UUssiinngg tthhee MMeennuuss
42
Using the Menus
The phone offers a range of functions that allows you to
tailor the phone to your needs. These functions are
arranged in menus and submenus.
The menus and submenus can be accessed by scrolling
or by using the shortcuts.
Accessing a Menu Functions by Scrolling
1. In Standby mode, press to access the menu
facility. Scroll with (or navigation key ) to reach
the desired main menu. Press to enter the
menu.
2. If the menu contains any submenus: for example,
Language, find the one you want by scrolling with
navigation key. Press to enter the submenu.
If the menu you have selected contains submenus,
repeat this step.
3. Scroll with navigation key to find the setting of your
choice. Press to confirm the chosen setting.
Notes:
• You can return the previous menu level by pressing
.
• You can exit the menu without changing the menu
settings by pressing .
Main menu Main menu 1 Main menu 2
1. Calls 1. Outgoing
2. Incoming
3. Missed
4. Erase History 1. Outgoing
2. Incoming
3. Missed
4. All Calls
5. Air Time 1. Last Call
2. Total
3. LifeTime
4. Erase Total
2. Phone Book 1. Find
2. Add
3. Rename Group
4. My Phone #
5. Memory
3. Message 1. New Message
2. Voice
3. Inbox
4. Outbox
5. Filed Msg
6. Web Alert
7. Erase Msg
8. Msg Setting 1. General
2. New Message
4. Web 1. Get in Web
2. Prompt
5. Planner 1. Today
2. View Month
3. Jump To Date
4. To Do List
5. Memo Pad
6. Count Down
7. Alarm Clock
8. World Time
9. Caldulator
6. Voice 1. Voice Dial 1. Record
2. Review
3. Erase All
4. Set Active
2. Voice Memo 1. Record
2. Review
3. Erase All
3. Voice Answer 1. On/Off
2. Config
3. Inbox
45
UUssiinngg tthhee MMeennuuss
44
UUssiinngg tthhee MMeennuuss
Main menu Main menu 1 Main menu 2
7. Sounds 1. Ringer Vol 1. Calls
2. Messages
3. Alarm
4. Key Beep
2. Ringer Type 1. Voice Calls
2. Messages
3. Alarm
4. Data/Fax In
5. Planner
3. Tone Length
4. Alerts 1. Minute Beep
2. Service
3. Connect
4. Disconnect
5. Fade
6. Roam
5. Roam Ringer
8. Display 1. Animation
2. Greeting
3. Backlight
4. Contrast
5. Auto Hyphen
6. Dual Clock
9. Game 1. Push Push
2. Fly Ribbon
3. Spider
0. Setup 1. Auto Answer
2. Answer Mode
3. Auto Retry
4. Language
5. Set Time
6. Set NAM
7. Set System
8. Data/Fax
9. Version
0. Security 1. Lock Phone
2. Change Lock
3. Restrict
4. Emergency #
5. PIN
6. Erase PBook
7. Reset Phone
List of Menu Functions
47
CCaallllss
Incoming Menu 1-2
This option lets you view the last 10 calls received (if
you are subscribed to the caller ID service). When you
access this menu, the list of the incoming calls is
displayed.
For further information on scrolling through the list and
accessing a call log, see “Outgoing” on page 46.
Missed Menu 1-3
If the caller identification is available (contact your
service provider), your phone keeps a list of 10 incoming
calls that you failed to answer.
For further information on scrolling through the list and
accessing a call log, see “Outgoing” on page 46.
Erase History Menu 1-4
You can erase the entries stored in each of the three call
logs or all three logs at once.
The following options are available:
Outgoing: The calls you made are erased.
Incoming: The calls you received are erased.
46
Calls
You can use the Calls menu to:
• View and dial the last outgoing or incoming numbers.
• Erase the numbers in the call log memory.
• View the duration of calls.
Outgoing Menu 1-1
Note: You can also access this menu by pressing and
holding the key in idle mode.
The phone stores up to 10 outgoing calls you dialed.
When you access this menu, the list of outgoing calls is
displayed.
1. Press up or down navigation key to find the desired
number (or name if saved in Phonebook).
2. Press to select the highlighted number.
The dialed number (and name if stored in Phonebook)
is displayed.
3. If you want to access Options, press . The
following options are available:
• Talk: dials the selected number.
• Save: allows you to save the number in the Phone
book.
• Prepend: allows to add an area code or feature
code to the number before calling the
number.
If you want to place a call to the displayed phone
number, press . To exit the call log, press .
49
Phone Book
The Phone book allows you to store frequently used
phone numbers and the associated names in your
personal directory to make it easy for you to make a call
without having to remember or enter the phone number.
You can store up to 500 numbers.
Find Menu 2-1
This option allows you to find an entry.
Note: You can access this menu by pressing idle
mode.
1. Press left or right navigation to scroll to the desired
method.
By Name: enter the character(s) you want with the
desired Input mode. Then the phone
shows the entries containing that
character(s).
By Entry: enter the location by pressing the numeric
keys.
By Group: Select the group containing the entry you
want to find using left or right navigation
key. The phone lists all entries in the
selected group.
2. When the desired entry is highlighted, press to
access the entry.
48
CCaallllss
Missed: The calls you missed are erased.
All Calls: All calls you made, received and missed are
erased.
When a confirming message pops up, press to
erase the log. If you want to cancel the operation, press
.
Air Time Menu 1-5
Your phone records the amount of airtime (or talk time)
used. Using this option, you can view the number of the
calls to or from your phone, and the airtime for all calls.
You can easily erase the airtime measurement at any
time and there fore is convenient for estimating your
usage.
Note: This feature is not intended for billing puroses.
The following options are available:
Last Call: shows airtime of the last call.
Total: shows the number of all calls made to or from
your phone and total duration of the calls since
the air time counter was lastly set to zero by
using the Erase Total option.
LifeTime: shows the number and total duration of all
calls made to or from your phone since the
phone was shipped from the factory.
Erase Total: erases the “Total” airtime measurement
and resets the air time counter.
51
PPhhoonnee BBooookk
Creating a New Entry
1. Enter a phone number and press .
2. Press to confirm to add a new entry.
3. Select the label to save the phone number using
the left or right navigation key and press .
4. Highlight the desired option you want to customize by
using the navigation key. The following options are
available:
• New Name: To enter the desired name. You can
enter up to 12 characters. For further information
on how to enter text, see page 36.
• Location: The first available location displays. If
necessary, enter the location number using the
number keys.
• Mobile/Office/Pager/Fax/No label: Select the
label to edit the number.
• E-mail: To edit the e-mail address.
• Voice Dial: To set the voice dial for the number.
• Speed Dial: To set the speed dial for the number.
• Group: To set the group containing the entry.
• Ringtype: Select the unique ring type for the entry.
By selecting different tones, incoming voice calls
which have caller ID can be distinguished from
those that do not.
50
PPhhoonnee BBooookk
3. The phone shows the details on the name.
Press to place a call or press to see the
following options.
Talk: allows you to place a call.
Edit: allows you to edit phone number, name, location
number, label category and so on.
Erase: erases the entry.
With an entry selected, if you press , you can
access the following options:
Edit: allows you to edit phone number, name, location
number, label category and so on.
Erase: erases the number.
Add New: allows you to add a new entry.
Refer to Add menu(2-2) for details.
Add Menu 2-2
This menu allows you to store a number with a name in
your Phone Book. You can save a person’s various
numbers, such as workplace number, mobile number and
fax number, into one entry. Using this feature, you can
keep someone’s information together. It also helps you
to find numbers easily in the Phone Book.
53
Rename Group Menu 2-3
This option allows you to edit the name of the group.
1. Scan through the list using up or down navigation key
to edit the group name.
2. Press to select the group.
3. Enter a new group name.
For further details on how to enter characers, see
page 36.
4. Press to save it.
My Phone # Menu 2-4
This option displays th ephone number of th ephone
being used.
Memory Menu 2-5
This option shows the memory information for the phone
book and the voice dial.
PPhhoonnee BBooookk
52
PPhhoonnee BBooookk
• Secret: To set the number in secret, select On.
This prevents a number from being displayed or
dialled when it is accessed by unautorized user.
When you have made the number secret, only a
person with your phone’s lock code can view the
number.
4. Press to edit the setting for the selected option.
5. Repeat steps 3 and 4 to customize another option.
6. Press to save the entry.
After storing, the phone displays the phonebook entry
number you saved and the remaining entries you can
further store phone numbers.
Storing Phone Numbers at Call End
To store a phone number at your call end:
1. Press to end the call. The call time and the
phone number display.
2. To store the phone number, press .
3. To complete storing the number, follow the
instructions in “Creating a New Entry.”
55
MMeessssaaggeess
54
1. Enter the Send-To phone number using the numeric
keys and press .
2. Enter the message contents, or a numeric page. For
further details on how to enter text, see page 36.
Note: A total of 180 characters, including e-mail
address character length if send-to destination is an
e-mail address, can be entered for each message, can
be entered for each message.
3. When entering is finished, press .
4. If you wish to edit the following available options
before transmitting the message, press .
Send To: Edit the send-to phone number.
Message: Edit the message contents already entered.
Callback #: Edits the callback number. Enter the new
number to replace the current number.
Delivery ACK: edits the Delivery Acknowledgement.
You can toggle between YES or NO by pressing the
navigation key .
Priority: edits the priority level of the message. You
can toggle between NORMAL or URGENT by
pressing the navigation key .
Note: Callback, Delivery ACK, and Priority are already
preset to default values in the Settings menu .
Message
Your phone can receive voicemail notification, text messages,
and pages. Also, your phone can send text messages and
pages if you system supplier provides this service.
When the phone receives a message, an alert sounds, a
text notification displays and the name and phone
number of the caller if available. The New Message
icon remains on the screen until you read the new text,
numeric page or Web Browser message, or until you
listen to the new voicemail messages.
Incoming messages are received even when your phone
is in Lock mode. However, the screen will not display
information about the message. To access a message, or
to return a call other than an emergency or priority
number, unlock the phone to proceed.
If you are on a conversation, and you receive an
incoming message, your phone automatically mutes the
ringer (this is to avoid ringing in your ear while you are
trying to converse).
New Messages Menu 3-1
You can create short text messages, and numeric pages,
to send to other mobile numbers.
Note: Transmitting message is only supported in digital
networks, and if service is provided by your service
provider.
57
MMeessssaaggeess
56
MMeessssaaggeess
Inbox Menu 3-3
Your phone can store up to 100 pages and text
messages, depending on the length of the message. If
the message memory is full, a message is displayed and
the phone rejects additional messages until you erase
the stored messages.
Press up or down navigation key to scroll to the desired
one of the messages in the list and press . The
phone displays the message contents. If necessary,
press up or down navigation key to scan through the
contents.
While viewing a message, press to access the
following options.
Reply: allows you to send a reply message to the
sender.
Forward: allows you to send the message to the other
person.
Delete: deletes the message.
Save addr: allows you to save the sender’s phone
number into your Phonebook. For further
information on storing a number, see page
50.
Save cb#: allows you to save the call back number of
the message.
5. Press to send the message.
Note: Closing the phone or pressing before
message is transmitted will terminate the message
transmission.
Voice Menu 3-2
When the voicemail notification displays, press or
to scroll to the desired voice mail and press
to review and re-review the message. If multiple new
voicemails are received but not reviewed, then only the
last received voicemail information will be displayed.
The display information will include time / date stamp,
number of new voicemails, and callback number.
While reviewing the message, press to access the
following options.
Listen: allows you to listen to voicemail message. The
phone will automatically dial your voicemail box.
Reset: resets the message icon and the counter for new
voicemail messages, if desired. (The system
resets the counter automatically after you listen
to all new messages.)
59
MMeessssaaggeess
58
MMeessssaaggeess
Filed Msg Menu 3-5
Your phone can store draft messages that are yet to be
sent in the filed message folder. You can access this
folder at a later time to edit and send the message.
To store unsent message to the filed message folder;
1. Follow the process of writing a new message.
2. When you finish inputing the message press
for option.
3. Select Action, and press .
Press up or down navigation key to scroll to the desired
message and press to review it. Press for
further options.
Select Edit to edit it, and select Delete to delete it.
Web Alert Menu 3-6
When you receive a new Web alert, your phone notifies
you and displays the folloing opitons. To select an
option, scroll to highlight it and press .
View: to access the Web Inbox an ddisplays the
message.
Clear: you can press if you do not wish to read the
message at this time.
Outbox Menu 3-4
Your phone can store up up to 95 transmitted messages
until the total length of the message exceeds 16 kbytes.
You can review or resend the messages stored in
Outbox, if needed.
When you enter the Outbox menu, you can see the
message list. The marker !next to the message means
that it is urgent.
Press up or down navigation to scroll to the desired
message and press to review the message. The
display shows the date and time when the message is
created, the designated number (and name if saved in
Phonebook) and message contents.
If necessary, press up or down navigation to scan
through the contents.
While reviewing a message, press to access the
following options.
Re-send: allows you to resend the message. For further
information on sending a message, see page
54.
Delete: deletes the message from Outbox.
61
MMeessssaaggeess
60
MMeessssaaggeess
Voice Mail #: All unanswered call sto your phone are
automatically transferred to voicemail, even if your
phone is off or in use. You can set up the voice mail #.
New Message
You can set up the following options as default setting
when creating a new message.
Call Back #: You can set the call back number. Your
phone number is preset at factory.
Save Message: allows you to set whether you want
the transmitted message to be saved
in Outbox or not.
- Do not save : not to save automatically
- Prompt Save: asks you to save it or not
- Auto Save: save the message automatically
Entry Method: You can select the text input mode
between T9 Word and Alphabet (ABC).
Delivery Ack: allows you to activate or deactivate the
delivery acknowledgement feature.
When this is activated, the network
informs you whether your message has
been read or not by the recipient.Select
On to turn on the feature or Off to turn it
off.
Canned Msg.: allows you to set the one of canned
messages.
Erase Msg Menu 3-7
Using this menu option, you can erase all messages in
each of three message boxes; Voice mail box, Inbox and
Outbox.
You can also erase all of the messages at one time.
Message Setting Menu 3-8
Via this menu, you can preset several options for new
message transmission.
General
Scroll Timer: You can set the screen to scroll
automatically or not.
- 1~5 seconds: If an incoming message is too long
for the display, the phone displays it by scrolling the
screen automatically. You can set the time when the
phone scrolls to the next screen.
- Off: It does not scroll automatically. You should scroll
to next screen manually using up or down navigation
key.
Msg.Reminder: Following options are available.
- Off: It doesn’t alerts when you receive an incomming
call.
- Once: It alert just once when you receive an
incomming call.
- Every 2 min: It alert every 2 minutes when you
receive an incomming call.
63
WWeebb
Get in Web Menu 4-1
Note: The first time you use the Web Browser, you will
go through a security setup process that takes 3 to 5
minutes. Please follow the on-screen prompts to
complete the security setup process. This initial setup
process occurs only the first time you access the
service.
1. Accessing the Web Browser menu connects your
phone to the Wireless Web.
Note: If a reminder appear depending on your setting
in the Web Browser Setup menu, simply answer Yes
or No using the soft keys ( and ).
2. Once connected, the Home page (or the last page
visited) will be displayed.
3. The opening page when accessing the Web Browser
is dependent on the Wireless Web service provider
content. To scroll through the screen, use up or down
navigation key.
Exiting the Web Browser
To exit the Web Browser, simply press at any time.
If the “Prompt to end” or “Prompt both” option is set in
the Web Browser Setup menu (see page 66), you will be
prompted whether you want to end the Browser call.
62
Web
About Web Browser
Your phone comes equipped with a Web Browser makes
it possible for you to access the Wireless Web.
The Web Browser allows you to access up-to-the
minute information through your phone. Browsing the
Wireless Web through your phone is unlike using your
computer in that site providers have selected only the
critical aspects of their site to present to wireless phone
users, and have removed most graphics.
Each time you start the Web Browser, the phone will
connect to the Wireless Web and the service indicator
icon ( ) will appear on the display. Any time the
service indicator icon is visible on the display, you are
connected to the Wireless Web and will be billed
accordingly. Rates will vary according to your service
option.
The Web Browser will end the connection after a
certain period of network inactivity and will
automatically reconnect as necessary. For this reason,
you may find that you are billed for several network
connections within a single session. This is normal and
is designed to minimize your bill.
65
MENU Key: This is the left soft key. The right
soft key is used primarily for secondary
options, or a menu of secondary options. For
more info, see “Using the Web Browser Soft
Keys.” on page 64.
OK Key: This is the right soft key. The left
soft key is used primarily for selecting the
highlighted item, but its function may change
depending on what you are doing (see “Using
the Web Browser Soft Keys.” on page 64).
END Key: Exits the Web Browser and returns
the phone to Standby mode.
Clear Key: This key performs two important
functions:
• Backs you up in the browser. Pressing it
once backs you up one page. Pressing and
holding this key backs you up to the Home
page.
• Clears out entered text or numbers. When
entering numbers or text, press this key to
clear the last number, letter, or symbol.
Press and hold this key to completely clear
the input field.
Numbered Keys 0 - 9: If the items on a page
are numbered, you can use these keys to
select them.
Volume Key: Allows you to scroll up or
down by a page or change the volume setting.
64
Using the Web Browser Soft Keys
At the bottom of the Web Browser display is a solid bar
which contains browser commands. “Soft” keys (
and ) below the solid bar are used to execute the
commands. These two keys are called soft keys because
their function changes depending on where you are in
the Web Browser software.
Navigating the Web Browser
When you use the Web Browser, some keys on your
phone operate differently than on a normal phone call.
These keys are explained below. The Web Browser
presents on-screen items in one of the following ways:
• text or numeric input
• links (embedded in content)
• numbered options (some options may not be
numbered)
• simple text
You can act on the options or links by making use of the
soft keys. The soft keys are located below the bottom
line of the display.
Here’s how the keys work in the Web Browser:
Navigation Key: Use the navigation key to
scroll to and select browser options. The
currently selected option is indicated by an
arrow. You can also use the navigation key
to move the cursor when editing text.
WWeebb WWeebb
6766
Planner
The Scheduler feature enables you to:
• Keep track of important dates and events
• Create a list of things to do
• Check the time in another part of the world
• Use the phone as a calculator
Today Menu 5-1
You can schedule up to 9 events for the current day
indicating each event’s start and end time. You can even
have your phone's calendar alert you before an event is
to start. Events scheduled for future dates automatically
appear on your Today events schedule on that day.
To enter a new event;
1. Enter your event information. You can enter up to 32
characters. For more information on entering letters,
see page 36.
2. Press to accept your entry.
3. Enter the Start Time and Date using the numeric keys
and press .
4. Enter the End Time and Date using the numeric keys
and press .
5. Select when an alarm will notify you of your event by
pressing left or right navigation key. Selecting No
alarm does not ring the alarm.
6. Press to save your event.
Entering Text, Numbers or Symbols in the Web
Browser
When prompted, you can enter text, numbers or symbols
using the same way as in the phone mode. See page 36
on how to enter letters.
Prompt Menu 4-2
Your phone can be set to view a prompt each time you
start or end a Browser session. You have the option to
change when the start prompt is displayed. The dufault
setting is set to start prompt.
The following options are available:
• To Start: This is default setting. You will see the
prompt when enter the browser, but not when you
exit it.
• ToEnd: You will see the prompt only when you exit
the browser.
• Both: You will be prompted when you enter or exit
the browser.
• None: You will never see this prompt.
WWeebb
68
PPllaannnneerr
69
PPllaannnneerr
If you already scheduled events when you select the
Today menu option (5-1),
the events are displayed. Press
to select the event you want to view.
The following options are available when you press .
Add new: allows you to add a new event.
Edit : allows you to edit a scheduled event.
Erase : allows you to erase a selected event.
Erase All: allows you to erase all events.
After you select an option, press . Then follow the
screen prompt.
View Month Menu 5-2
You can to enter this menu by pressing the left
navigation key in standby mode.
This option allows you to view in calendar format the
current month, or a past of future month. In this option,
the current date is highlighted on the calendar. Days
with the scheduled events are underlined.
• You can move up or down the Calendar by one week
by pressing or .
• You can move right or left one day by pressing
or .
• To display the next or previous month, press or .
The following options are available when you press .
View: allows you to view the scheduled events of the
selected day.
Add new: allows you to add a new event on the
selected day.
To create a new schedule;
scroll to the desired date in the calendar using the
navigation keys or volume keys and then press to
confirm the selected date. And schedule a new event
referring “Today” on page 67.
When a stored memo is displayed, press to access
the
Options
.
For further details on Options, refer “Today” on page 67.
71
PPllaannnneerr
70
PPllaannnneerr
Jump To Date Menu 5-3
This feature allows you to specify the calendar date you
want to view. Once at your desired date you can enter,
edit and delete events in your calendar.
Enter the date using the numeric keys, and press .
To create, edit or erase the events, refer to “View
Month” on page 68.
To Do List Menu 5-4
This feature allows you to draw up a list of tasks to be
done and assign a priority and deadline to each task.
To creat a new task;
1. Enter the first task.
Note: You can enter up to 32 characters. For further
details on how to enter characters, see page 36.
2. Press to confirm.
3. Enter your deadline using the numeric keys.
4. Select high or low priority using up or down
navigation key and then press to store the task.
If tasks are already defined in the To Do List, the current
contents are displayed with the deadline and the
associated priority (High or Low).
Scroll to the desired item by pressing
left or right
navigation key.
The following options available when you press .
Add new: allows you to add a new task.
Edit: allows you to edit a saved task.
Erase: allows you to erase a selected task.
Erase All: allows you to erase tasks.
After you select an option, press . Then follow the
screen prompt.
Memo Pad Menu 5-5
This feature allows you to write down memos.
You can enter up to 60 characters for each memo.
If memos are already saved, scroll to the desired item by
pressing up or down navigation key.
The following options available when you press .
Add new: allows you to add a new memo.
Edit: allows you to edit a saved memo.
Erase: allows you to erase a selected memo.
Erase All: allows you to erase memos.
After you select an option, press . Then follow the
screen prompt.
73
PPllaannnneerr
Alarm Clock Menu 5-7
This option allows you to set or release the alarm to ring
at a specific time. Press to access the options.
Set: to set the alarm, proceed as follows:
1. Select the alarm frequency option by pressing up or
down navigation key and press .
• Once: the alarm rings only once and is then
deactivated.
• Daily: the alarm rings every day at the same time.
2. Enter the required time when an alarm rings using the
numeric keys.
3. Press to save the setting.
To stop the alarm when it rings, press any key.
Release: to release the alarm, press .
72
PPllaannnneerr
Count Down Menu 5-6
This menu help you know how much time it takes you to
do something, or how many months, days, hours and
minutes until a specific day. You can create up to 30
Count down timers using this menu.
To create a new count down timer;
1. Enter a name for your new Count down item and press
. For details on entering text, see page 36.
2. Enter the date and time that you want to Count down
to or from.
Notes: You can enter the years between 1980 and
2099 for dates.
3. Press to save the item.
If a Count Down timer is already defined when you select
the Count Down menu option (5-6), the defined Count
Down timer is displayed.
If there are more than one items defined in the menu,
scroll to the desired item by pressing left or right soft key.
The following options are available when you press .
Add new: allows you to create a new item.
Edit : allows you to edit the item.
Erase : allows you to delete the item.
After you select an option, press . Then follow the
screen prompt.
74
PPllaannnneerr
World Time Menu 5-8
This menu allows you to check the current time for
Greenwich Mean Time (GMT) and major cities around the
world.
Select the city corresponding to your time zone by
pressing the navigation keys one or more times. The local
date and time are displayed.
Calculator Menu 5-9
Using this feature, you can use the phone as a
calculator. The calculator provides the basic arithmetic
functions: addition, subtraction, multiplication and
division.
1. Enter the first number using the numeric keys.
2. Set the operator for your calculation by pressing the
navigation keys until the required arithmetic symbol
appears: + (add), - (subtract), x (multiply), / (divide).
3. Enter the second number.
4. To calculate the result, press .
5. Repeat steps 1 to 4 as many times as required.
Each time you change the operator, the previous
calculation is performed and the result is displayed as
the top number in the display.
Note:
• To erase any mistakes and clear the display, press .
• Use to enter a decimal point and to change
the sign of a number to a negative (-).
75
Voice
In this menu, you can use the phone’s voice features
such as:
• voice dialing
• voice memo
• voice answer
Voice Dial Menu 6-1
When your phone is in digital mode, you can call up to
20 stored entries by speaking the name into the
microphone. Using the Voice dialing option requires that
you first program the phone to recognize the name of
the person you are calling.
Note: You can enter quickly this menu by pressing and
holding key in Standby mode.
Record
This option allows you to record names and register
numbers for subsequent voice dialing. The phone
provides voice prompts and screen displays to guide you
through the recording process.
1. Say the name you want to program at the prompt.
The phone stores the name as a first sample.
2. Respond to the prompt by repeating the name after
the beep. The phone stores the name as a second
sample, and then prompts you to enter the phone
number.
77
VVooiiccee
76
VVooiiccee
Review
When a list of your stored voice dial numbers displays,
scroll to the desired entry and press .
The recorded name plays audibly.
Erase All
This option erases all entries in the Voice Dial list.
Set Active
Voice Dialing is always active once you have
programmed the phone to accept voice dialing entries
and the associated phone number.
To place a call using Voice Dialing, simply press and
hold in Standby mode and then say the name into
the phone after you hear the prompt.
You can also initiate a Voice Dialing call by following
options.
[*] Only: enables Voice Dialing only by pressing and
holding .
[*] /Folder: enables Voice Dialing by pressing and
holding or by opening the phone.
[*] /EarMic: enables Voice Dialing by pressing and
holding or by pressing and holding
the button of your ear microphone.
3. Enter the phone number by pressing the numeric keys
and press .
4. Complete storing the number into Phonebook referring
page 65.
Note: You can also program the phone for voice dialing
by accessing the Phonebook menu. Use Add Entry
menu under Phonebook to store a phone number, then
select Voice Dial from the label category.
* Tips on Recording Name
• Avoid recording similar names phonetically. If you
record a similar name to the one already in memory,
the phone requests another name.
• Speak clearly and naturally.
• The person who will use the phone should record the
name. The phone does not recognize the name if the
voice sounds differently.
• Avoid too long or too short name. Names with two to
five syllables are recommended.
• If this feature does not work properly, erase the
name, and record with another name.
• It is recommended to practice several times to obtain
best result.
• You can record up to 20 names. If you try to record
more than 20, the phone announces ’Memory is full’.
79
VVooiiccee
78
VVooiiccee
Voice Answer Menu 6-3
This menu allows you to have incoming messages
stored directlry into the phone. When this option is
turned on, the caller’s messgae is recorded directlry into
memory. This is uses the voice memo memory, so the
amount of time is dependent on th eavailable memory
less any voice memos.
On/Off
This option allows you to activate the option to enable
or disable.
Config
- Greeting : You have a predefined greeting message
to be played when a call comes in. Also,
you can have one greeting message
recorded as your preference.
1. Wait until a prompt beep sounds and record the voice
memo by speaking into the microphone.
While recording,you can pause recording by pressing
left navigation key , and resume by right navigation
key.
2. When recording is completed, press . The phone
automatically saves and activates the message.
3. If you want to play back the currently selected
message, highlight Play and press .
Voice Memo Menu 6-2
Record
You can record 4 separate voice memos. Each voice
memo can be up to one minute in length. When
recording, a 60-second timer displays and an alert souds
to indicate when recording time expires.
When you speak into the phone to record the voice
memo, press to stop recording.
The record finished screen is displayed with the following
choices:
Review: to review the voice memo. The screen displays
the length of the recording with the date and time.
Rerecord: to rerecord the voice memo.
Save: to save the voice memo and add a title.
Review
When a list of your stored voice memo displays,
scroll to the desired entry and press to play the voice
memo.
Erase All
This option erases all entries in the Voice Memo list.
81
VVooiiccee
80
VVooiiccee
Inbox
1. The list of the recorded memos appears.
Note: If the phone has the caller’s messages waiting
to be checked, it displays the total number of the
messages and the date and time when the last
message was recorded. Pressing takes you to
Inbox.
2. Press up or down navigation key to scroll to the
desired message and press to play it back.
While playback, you can pause playing by
pressing left navigation key , and resume by right
navigation key.
3. If you want to access the following options,
press .
Info: shows the detailed information on the memo,
such as the caller’s number (if identified), elapsed
time, memory used for the message and the time
when the memo was recorded.
Erase: erases the selected message.
Erase All: erases all of the recorded messages.
Talk: places a call the caller’s number (if identified).
Save: stores the caller’s number (if identified) into
your Phonebook.
4. Press to back up one menu level.
If you want to record a new message, highlight
Record and press . Repeat steps 1 to 2.
Note: Each time you record a message, your phone
automatically overwrites the old message.
If you want to select a greeting message to be
played, highlight Select and press . Select Mine
to use your own message and Default to use the
default message and press .
4. Press to back up one menu level.
- Screening: turns on or off the screening speaker
which allows you to listen to the caller’s
message while the caller is leaving it.
- Wait time: sets the time the phone waits before
answering the call with the greeting
message. The wait time can be set to No
ring, After 3 sec, After 5 sec, or After
10 sec. Selecting No ring plays back the
message as soon as the phone receive
signal of a call.
83
SSoouunnddss
82
Ringer Type Menu 7-2
This option allows you to set a unique ring for voice calls,
messages, data/fax, alarm, and schedule. Select a unique
ring tone from 25 melodies. As you change it, it sounds
for a few seconds.
Voice Calls: allows you to set a unique ring for incoming
voice calls.
Messages: allows you to have a distinctive ring for an
message alert.
Alarm: allows you to have a distinctive ring for an alarm.
Data/Fax In: allows you to be alerted with a distinctive
ring tone when you are faxed or received a
data through the phone (dependent on the
network ).
Planner: allows you to have a distinctive ring for a
planner alarm.
Tone Length Menu 7-3
The tone length setting enables you to select normal or
long DTMF (dual-tone multi-frequency) tones. When you
use a teleservice (such as your bank account) and press
the keys to enter numbers into the teleservice, you are
sending DTMF tones. The system used by the bank or
other service determines if you need short or long DTMF
tones. If the service is digital (which most are these days)
short DTMF will almost always work. However, some new
systems and almost all older (analog) systems require you
to use long DTMF tones. Many home answering machines
require long DTMF tones.
Sounds
You can use the Sounds menu to customize various
sound settings, such as the:
• Ringer volume, type, and tone
• Key beep and voice volume
• Alert sounds and a ringer for the roaming calls
• The ringer which sounds when the phone is switched
on or off
Ringer Vol Menu 7-1
This menu option allows you to adjust the ringer volume.
Calls: allows you to adjust the ringer volume for the
incoming calls.
Messages: allows you to adjust the ringer volume for the
messages.
Alarm: allows you to adjust the ringer volume for an
alarm.
Key Beep: allows you to adjust the volume for the key
beep.
Press or to adjust the volume or select the
type.
Volume Level: adjust the volume level (the more bars,
the louder).
Vibrate: switches the phone to vibration mode. An
incoming call vibrates the phone.
1 Beep: sounds a beep.
85
SSoouunnddss
84
SSoouunnddss
Roam Ringer Menu 7-5
You can set the phone to use a distinctive ring for
incoming roaming calls.
Press up or down navigation key to choose On to use a
distinctive ringer or Off to use a normal ringer.
Alerts Menu 7-4
Your phone gives audible alerts (beeps) at a specified
time to inform you that certain things have happened.
The alerts only occur in your earpiece so the other party
does not hear them.
The available alerts are:
Minute Beep: With this menu option set to On, the
phone sounds an alert 10 seconds before
each elapsed minute to remind you of
the length of the current call.
Service: With this menu option set to On, the phone
sounds an alert when you exit service area or
when you return to a service area.
Connect: With this menu option set to On, the phone
sounds the connect tone when your call is
connected to the system.
Disconnect: With this menu option set to On, the
phone sounds the disconnect tone when a
call is disconnected.
Fade: With this menu option set to On, the phone
sounds an alert when a dropped call occurs
during conversation in response to a signal fade.
Roam: With this menu option set to On, the phone
sounds an alert when your phone starts roaming.
8786
DDiissppllaayy
Greeting Menu 8-2
This option allows you to set a banner message to be
displayed at the bottom of the display in Standby mode.
To change the banner:
1. If necessary, press repeatedly to delete each
letter of the old greeting.
Press are hold to clear off the old greeting.
2. Enter your banner message up to 28 characters by
using the alphanumeric keys. For further information
on how to enter letters, refer to page 36.
3. When entering is completed, press to save the
new banner.
Backlight Menu 8-3
You have several options for setting how the LCD
backlight operates. Remember that backlight use drains
your battery faster.
The following options are available:
30 (/15/7)seconds: The backlight comes on when you
press a key or receive a call and
switches off 30(/15/7) seconds
after the last key is pressed.
always on: The backlight remains on while the phone
turns on.
Display
The Display feature enables you to:
• Set the length of time for backlight.
• Create your own greeting, and select an animation to
be displayed in Standby mode or when powered on
or off.
• View the version of your phone.
Animation Menu 8-1
Your phone displays graphics images when you set this
option. This setting is just for fun and grins so have fun
with it.
The following options are available:
Power On: You can select an image to be displayed
when you switch the phone on.
Power Off: You can select an image to be displayed
when you switch the phone off.
Idle Mode: You can select an image to be displayed in
idle mode.
88
DDiissppllaayy
Contrast Menu 8-4
The LCD has contrast setting that can help you see the
screen better in different lighting conditions.
Scroll the contrast settings to determind the most
visible. When the desired contrast setting is displayed,
press to save.
Auto Hyphenation Menu 8-5
With this menu option set to On, your phone
automatically hyphenates numbers when you dial a
number. This hyphenates numbers as follows: 000-000-
0000. Digits following a pause are not hyphenated.
Dual Clock Menu 8-6
You can choose 2 locations to be displayed and set the
summer time on or off for each location.
89
Games
This menu allows you to play following games;
- Push Push
- Fly Ribbon
- Spider
Press up or down navigation key to scroll the entries,
and then press to select the desired one.
When the game start screen is displayed, press to
get help in playing the game. It displays key commands.
Press to exit the game and return to the idle
screen.
91
SSeettuupp
90
Auto Retry Menu 0-3
With this menu option activated, your phone will
automatically retry the call up to 10 times when a
connection fails.
To activate this feature, select how often the phone will
automatically retry the call. 60 Seconds, 30 Seconds,
and 10 Seconds are available.
Select Off deactivates this feature.
Language Menu 0-4
Sets the language of voice prompts, menus and key
input.
Select the desired language by pressing the navigation
key.
Set Time Menu 0-5
This option allows you to set the current date and time.
Enter the current time and date using the numeric keys.
The month, day, hour and minute must be entered with 2
digits. you must enter the hour in 12-hour format and
you choose the AM or PM. The year requires all 4
digits.,
Setup
Many different features of your phone can be
customized to suit your preferences.
Auto Answer Menu 0-1
With this menu option activated, the phone
automatically answers calls after predefined rings. This
option is useful while driving, for instance.
To activate this feature, select how many times your
phone rings before answering an incoming call. 1 Ring,
3 Rings and 5 Rings are available.
With this menu option set to Off, the phone does not
answer an incoming call, and if you do not answer the
call, it is stored in Missed Call log (see page 47).
Answer Mode Menu 0-2
This menu option allows you to select how to answer an
incoming call. The following options are available:
By any Key: The phone answers when you press any
key except .
By send key: The phone answers only when you press
.
93
SSeettuupp
92
SSeettuupp
Data/Fax Menu 0-8
Your phone is capable of sending and receiving digital
data and fax call when connected to a computing device
(laptop, desktop, handheld, palmtop, etc.) running
Windows 95, Windows 98, or Windows NT. The phone
functions just like a typical modem on your PC, enabling
you to use wireless data involving a side variety of
Windows software applications.
To use digital data or fax services with your phone, you
will need to obtain digital data/fax kit from your service
provider. This kit will contain the necessary cables,
software, and documentation required for your to
connect and use your phone with your computing device.
Note: The phone must be on a digital network to
receive or send fax and data.
The following options are available:
Data/Fax Off: Your phone receives voice calls only.
Fax for Next Call: Your phone receives fax calls for
next 10 minutes.
Fax until Powered Off: Your phone receives fax calls
until you power off and back
on the phone.
Data for Next Call: Your phone receives data calls for
next 10 minutes.
Data until Powered Off: Your phone receives data
calls until you power off and
back on the phone.
Set Nam Menu 0-6
Your Samsung phone can store two NAMs (NAM stands
for numerical assignment module - essentially your
telephone number). This means you can have two phone
numbers on your phone, and you can quickly and easily
switch your service back and forth between the two
numbers.
Press up or down navigation key to select NAM 1 or
NAM 2. If you change the NAM, the phone will reboot
and acquire service using the new NAM setting.
Set System Menu 0-7
The system selection feature of your phone enables you
to choose how your phone will roam. Roaming is a
feature which is only relevant in areas where there are
usually at least two cellular service providers which are
referred to as “A” and “B” and have valid roaming
agreements. Your service provider will provide you
information about this service or the best roaming
methods for you.
Home Only : With this setting, you cannot roam. If your
home system is not available then your call will not be
connected and the No Service Indicator ( ) is
displayed. In some service areas an operator may come
on line asking you how you would like to pay for the
call.
Standard : This option allows you to provide the best
system automatically.
95
SSeettuupp
94
SSeettuupp
Version Menu 0-9
This option allows you to view the software and
hoardware versions of your phone. This feature is
helpful if you have to call customer care.
Security Menu 0-0
Your phone provides many security options, including a
user-programmable lock code and call restriction
features.
To access the security menu, you must enter a four-digit
lock code. The lock code is preset to 0000 at factory.
Lock Phone
When the phone is locked, you cannot operate the
phone until you enter the lock code.
The following options are available:
Never: the phone remains unlocked.
On Power up: the phone locks automatically at the
next time your phone turned on.
Now: the phone locks immediately.
Receiving a Fax or Data File
To receive a fax or data, ensure that your phone is
connected to your PC and is powered on and select a
desired option.
When you receive a fax call, setup the Answer mode in
the Fax program on your PC and click on Receive and
select one of the following:
• Automatic Receive (recommended)
• Manual Receive
Sending a Fax or Data File
When connected to a computing device, your phone
allows wireless fax and data transmissions. Your
computing device software initiates the call to the
destination phone number. The phone functions as a
wireless modem to send the fax or data file to the
number designated by your PC software.
9796
Restrict
This feature allows you to restrict your calls. Call
Restriction can be set up by three ways. You can use of
any of the following options alone or in any
combination:
On: the phone restricts your calls.
Off: the phone doesn’t restricts your calls.
Emergency #
Your phone provides the option of storing emergency
numbers. All emergency numbers can be manually
dialed at any time even when your phone is locked or all
default priority numbers are depending on your service
provider.
To store an emergency number, select a location using a
numeric keys or up or down navigation key and enter the
desired number. Each priority number can be up to ten
digits long. The number already stored in the location is
automatically deleted when you enter the new number.
To make an emergency call in Lock mode, simply enter
the emergency number, then press .
SSeettuupp
To place a call on Lock mode:
• To place an emergency call, enter the number and
then press . The phone recognizes emergency
numbers and the seven emergency numbers of menu
0-0-4.
• To place normal outgoing calls, press to display
the Lock Code screen, and then enter the lock code.
When the Standby screen displays, enter the phone
number, and then press .
To unlock the phone, press and enter the lock code.
The phone returns to Standby mode.
Change Lock
This feature allows you to change your current lock code
to a new one. The lock code is preset to 0000 at factory.
Enter a new, four-digit lock code, then press .
SSeettuupp
98
PIN (Personal Identification Number)
Note: Your service provider must enable this feature
and assign you a PIN in order for this feature to work.
This feature prevents your phone from being used by
unauthorized persons. Contact your service provider for
complete information on this feature. Your PIN is
programmable and can be up to 24 digits.
These options are available:
Never: The option is not activated.
Prompt: When you make a call, you are asked to send a
PIN.
Erase PBook
This menu allows you to erase all the numbers in your
Phone Book.
When a confirmation message displays, press to
clear the memory.
Reset Phone
Resetting the phone erases all of your saved options
and returns them to the factory default settings, and
erases your Phone Book, Call Logs, and SMS messages.
The phone reboots (turns itself off then on), restores the
default settings, and then returns to Standby mode.
SSeettuupp
99
Health and Safety
Information
Precautions When Using Batteries
Your phone is powered by a rechargeable Li-ion
standard battery.
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time
to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-approved
chargers. When a charger is not in use, disconnect
101100
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice - almost anywhere, anytime.
But an important responsibility accompanies the
benefits of wireless phones, on that every user must
uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of
a car, practice good common sense and remember
the following tips:
1. Get to know your wireless phone and its features
such as speed dial and redial. If available, these
features help you to place your call without taking
your attention off the road.
2. When available, use a hands free device. If
possible, add an additional layer of convenience and
safety to your wireless phone with one of the many
hands free accessories available today.
3. Position your wireless phone within easy reach. Be
able to access your wireless phone without removing
your eyes from the road. If you get an incoming call
at an inconvenient time, if possible, let your voice
mail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic
or hazardous weather conditions. Rain, sleet, snow,
ice, and even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while
driving. Jotting down a “to do” list or flipping
through your address book takes attention away from
your primary responsibility, driving safely.
HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn
it from the power source. Do not leave the battery
connected to a charger for more than a week,
since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and life-time of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental short
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and - terminals of the battery (metal strips
on the back of the battery), for example when
you carry a spare battery in a pocket or bag.
Short-circuiting the terminals may damage the
battery or the object causing the short-circuit.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn
103102
Operating Environment
Remember to follow any special regulations in force
in any area and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference of danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it is
recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
Electronic Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone.
consult the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum separation of 6 inches (15 cm) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car
will be stationary. If you need to make a call while
moving, dial only a few numbers, check the road and
your mirrors, then continue.
7. Do not engage in stressful or emotional
conversations that may be distracting. Make people
you are talking with aware you are driving and
suspend conversations that have the potential to
divert your attention from the road.
8. Use your wireless phone to call for help. Dial
emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it is a
free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. If you see an auto accident, crime in
progress or other serious emergency where lives are
in danger, call 9-1-1 or other local emergency
number, as you would want others to do for you.
10. Call roadside assistance or a special non-
emergency wireless assistance number when
necessary. If you see a broken-down vehicle posing
no serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured, or a
vehicle you know to be stolen, call roadside
assistance or other special non-emergency wireless
number.
HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn
105104
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Switch off your phone in any facility where posted
notices so require.
Potentially Explosive Atmospheres
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs
and instrutions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Users are advised to switch off the phone while at a
refueling point (service station). Users are reminded
of the need to observe restrictions on the use of
radio equipment in fuel depots (fuel storage and
distribution areas), chemical plants or where blasting
operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats; chemical transfer or storage
facilities; vehicles using liquefied petroleum gas
(such as propane or butane); areas where the air
contains chemicals or particles, such as grain, dust
or metal powders; and any other area where you
would normally be advised to turn off your vehicle
engine.
HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn
with the independent research by and recommen-
dations of Wireless Technology Research.
Persons with pacemakers:
• Should always keep the phone more than 6
inches (15cm) from their pacemaker when the
phone is switched on;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the pacemaker to
minimize the potential for interference.
• If you have any reason to suspect that
interference is taking place, switch off your
phone immediately.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such interference,
you may want to consult your hearing aid
manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical devices,
consult the manufacturer of your device to determine
if they are adequately shielded from external RF
energy. Your physician may be able to assist you in
obtaining this information. Switch off your phone in
health care facilities when any regulations posted in
these areas instruct you to do so.Hospitals or health
care facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn
107106
Other Important Safety Information
• Only qualified personnel should service the
phone, or install the phone in a vehicle. Faulty
installation or service may be dangerous and
may invalidate any warranty which may apply to
the unit.
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or
portable wireless equipment in the area over the
air bag or in the air bag deployment area. If in
vehicle wireless equipment is improperly
installed and the air bag inflates, serious injury
could result.
• Switch off your phone before boarding an
aircraft. The use of wireless phones in aircraft
may be dangerous to the operation of the
aircraft, and may be illegal.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services
to the offender, or legal action, or both.
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions which cannot guarantee
connection in all conditions. Therefore, you should
never rely solely upon any wireless phone for essential
communications (for example, medical emergencies).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not be
possible on all wireless phone networks or when
certain network services and/or phone features are in
use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
3. Press the <SEND> key.
If certain features are in use (keyguard, restrict calls,
etc.), you may first need to turn those features off
before you can make an emergency call. Consult this
document and your local cellular service provider.
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident - do not cut
off the call until given permission to do so.
HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonnHHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn
109108
• Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean it. Wipe it with a soft
cloth slightly dampened in a mild soap-and-water
solution.
• Do not paint it. Paint can clog the device’s moving
parts and prevent proper operation.
• Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications of
attachments could damage the phone and may
violate regulations governing radio devices.
• If the phone, battery, charger, or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if neccessary, arrange for service.
HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you to fulfill any
warranty obligations and allow you to enjoy this
product for many years. When using your phone,
battery, charger, or any accessory:
• Keep it and all its parts and accessories out of
small children’s reach.
• Keep it dry. Precipitation, humidity and liquids
contain minerals that will corrode electronic
circuits.
• Do not use or store it in dusty, dirty areas as its
moving parts can be damaged.
• Do not store it in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
• Do not store it in cold areas. When the phone
warms up (to its nomal operating temperature),
moisture can form inside the phone, which may
damage the phone’s electronic circuit boards.
• Do not drop, knock or shake it. Rough handling
can break internal circuit boards.
HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn
111
GGlloossssaarryy
DTMF - (Dual-tone Modulated Frequency ) You send
DTMF signals when you enter numbers by
pressing the digit keys.
EVRC - (Enhanced Variable Rate Codec) EVRC is a new
global standard for compressing and
decompressing voice signals. EVRC uses a lower
bit rate (the number of bits sent per second)
than existing CDMA vocoders, while providing
significant improvements in voice quality. This
technology enables your phone to provide
superb voice quality while benefiting from the
ability to process more cellular voice calls using
less bandwidth than the voice codecs in CDMA
networks today.
Frequency - A measure based on time, as one or more
waves per second, in an electrical or light
wave information signal. A signal’s
frequency is stated in cycles-per-second or
Hertz (Hz).
Hands-Free - A feature that permits a driver to use a
wireless phone without lifting or holding
the handset - an important safety feature
for automobiles, tractors and most other
motorized vehicles.
LCD - (Liquid Crystal Display) Commonly used to refer to
the screen display on the wireless phone.
110
Glossary
Airtime - Actual time spent talking on the wireless
phone. Most carriers bill customers based on
how many minutes of airtime they use each
month.
Antenna - A device for transmitting or receiving
signals. The size and shape of antennas is
determined, in part, by the frequency of the
signal they receive. Wireless phones and the
base station must have antennas.
Base Station - The fixed radio transmitter/receiver that
maintains communications with mobile
radio telephones within a given area.
(Typically called a cell or cell site)
CDMA - (Code Division Multiple Access) A spread-
spectrum approach to digital transmission.
With CDMA, each conversion is digitized and
then tagged with a code. The mobile phone
deciphers only a particular code to pick the
right conversation off the air. The transmitted
signal is just above noise level across the
available bandwidth.
Channel - Communications signals transmit along paths
called channels.
Codec - Compression & Decompression.
Deactivation - The process of rendering a wireless
phone inactive.
113
Index
A
Accessories • 7
Air time (1-5) • 48
Alarm (5-7) • 73
Alerts (7-4) • 84
Animation (8-1) • 86
Answer mode (0-2) • 90
Auto hyphen (8-5) • 88
Auto answer (0-1) • 90
Auto retry (0-3) • 91
B
Backlight (8-3) • 12, 86
Battery
charging • 15
installing • 14
low battery indicator • 16
removing • 14
precautions • 99
C
Calculator (5-9) • 74
Call
answering • 28
dialed • 46
emergency • 21
ending • 20
forwarding • 33
from Phone Book • 22
incoming (1-2) • 47
making • 20
missed • 47
outgoing (1-1) • 46
redialing last • 22
restriction • 97
three way • 33
waiting • 34
Caller ID • 30
Care • 108
Characters, entering • 36
Charging batteries • 15
Clock • 88
Connect tone • 84
Contrast (8-4) • 88
Correcting number • 20
Countdown (5-6) • 72
D
Data/fax
alert • 83
receiving/sending • 94
Data/fax (0-8) • 93
Dialing
pause • 24
prepend • 22
speed • 23
voice • 27, 75
Disconnect tone • 84
Display
LCD • 10
external • 13
menu (6) • 86
DTMF tone
length (7-3) • 86
Dual clock (8-6) • 88
E
Erasing History (1-4) • 49
Erasing message
received • 56
transmitted • 58
External LCD • 13
F
Finding
phonebook • 49
G
Games (9) • 89
Greeting (8-2) • 87
112
GGlloossssaarryy
LED - (Light Emitting Diode) Commonly used to refer to
a small light on the wireless phone or on the
Desktop Charger. The LED lights on the phone to
indicate an incoming call. The lights on the
charger indicate that battery charging is taking
place.
Prepend - The addition of a prefix, such as an area
code, to a phone number.
RF - Radio Frequency
Roaming - The ability to use a wireless phone to make
and receive calls in places outside of the
home service area.
Service Charge - The amount paid each month to
receive wireless service.
Standby Time - The amount of time a fully charged
wireless portable or transportable
phone can be on and idle without being
in use. (See Talk Time)
Talk Time - The length of time a person can talk on a
portable or transportable wireless phone
without recharging the battery.
Vocoder - Voice Coder. A device used to convert speech
into digital signals.
Wireless - Radio-based Systems that allow
transmission of telephone or data signals
through the air without a physical
connection, such as a metal wire (copper) or
fiber optic cable.
115
IInnddeexx
R
Received Messages
browser • 57
text • 57
voice • 57
Redialing
auto • 91
last call • 21
Removing battery • 14
Reset phone (0-0) • 98
Restrict • 97
Ring
type • 83
volume • 82
Roam ringer • 85
S
Safety
batteries • 99
information • 99
precautions • 5
Searching/dialing
phonebook • 49
Security • 95
Service alert • 84
Service light • 13
Setting NAM (0-6) • 92
Setting system (0-7) • 92
Setting time (0-5) • 91
Setup (0) • 90
Sounds (7) • 82
Speed dialing • 23
Standby mode • 18
Switching on/off
phone • 17
microphone • 29
T
Text, entering • 36
Today (5-1) • 67
Talk mode • 20
To do list (5-4) • 70
Tone length (87-3) • 83
Transmitted message (3-4) • 58
T9 text mode • 38
U
Unpacking • 7
V
Version (0-9) • 95
View month (5-2) • 68
Voice answer (6-3) • 79
Voice dial (6-1) • 75
Voice memo (6-2) • 78
Voice mail • 56
Volume, adjusting
earpiece • 34
ring • 34, 82
key • 82
W
Web Browser
accessing (4-1) • 63
prompt (4-2) • 66
World time (5-8) • 54
Writing new message • 54
114
I
Icon description • 11
Inbox ( 3-3) • 57
In-call options • 29
Incoming calls (1-2) • 47
Incoming data/fax (0-8) • 93
Installing battery • 14
Internet • 62
J
Jump to date (5-3) • 70
K
Key volume • 82
Keys
description • 9
location • 8
L
Language (0-4) • 91
Last number redialing • 21
Letters, entering • 36
Listening
voicemail •56
Lock code • 95
Low battery indicator • 16
M
Maintenance • 108
Memo pad (5-5) • 71
Memory (2-5) • 53
Memory, clearing • 98
Menus
list • 44
scrolling • 42
shortcuts • 43
Messages
alerts • 98
browser • 59
erasing • 60
filed • 59
greeting • 87
settings (3-8) • 60
text • 54
voice • 56
writing new • 54
Minute beep • 84
Missed calls • 47
Modes
phone • 18
text input • 36
Mute
key tones • 29
microphone • 29
N
Names
entering • 36
searching/dialing (2-1) • 49
NAM setting (0-6) • 92
Number
adding in an entry • 50
correcting • 20
my (2-4)• 53
searching • 49
O
Outbox (3-4) • 58
Outgoing calls (1-1) • 46
P
Phone
layout • 8
lock • 95
my number (2-4) • 53
Phonebook (2) • 49
PIN
code • 98
Planner (5) • 67
Power save mode • 19
Prepend dialing • 22
Priority number (0-4) • 91
IInnddeexx
116 117
Make a call Phone number + SEND
End a call END
Receive a call SEND or Open the phone
Adjust ringer (in Standby mode)
volume ▲ / ▼on the left side
Adjust speaker (during a conversation)
volume ▲ / ▼on the left side
Redial the last call SEND twice
Switch to silent Hold #
mode
Voice dialing Hold *+ Say name
Speed dialing Enter memory location of
desired number, holding the
final digit to automatically
dial.
Save Numbers With number on screen,
press OK and follow
prompts.
Phone book Press UP navigation key in
Search standby mode.
Wireless Web Hold
SCH-A595 Quick Reference Card
BASIC OPERATIONS
MENU TREE
Main Menu (To access, press MENU)
1 : Calls 1 : Outgoing
2 : Incoming
3 : Missed
3 : Erase Hisotry
4 : Air Time
2 : Phone Book 1 : Find
2 : Add
3 : Rename Group
4 : My Phone #
5 : Memory
3 : Message 1 : New Message
2 : Voice
3 : Inbox
4 : Outbox
5 : Filed Msg.
6 : Web Alert
7 : Errase Msg.
8 : Msg Setting
4 : Web 1: Get in Web
2: Prompt
5 : Planner 1 : Today
2 : View Moth
3 : Jump To Date
4 : To Do List
5 : Memo Pad
6 : Count Down
7 : Alarm Clock
8 : World Time
9 : Calculator
6 : Voice 1 : Voice Dial
2 : Voice Memo
3 : Voice Amswer
7 : Sounds 1 : Ringer Vol
2 : Ringer Type
3 : Tone Length
4 : Alerts
5 : Roam Ringer
8 : Display 1 : Animation
2 : Greeting
3 : Backlight
4 : Contrast
5 : Auto Hyphen
6 : Dual Clock
8 : Game 1 : Push Push
2 : Fly Ribbon
3 : Spider
0 : Setup 1 : Auto Answer
2 : Answer Mode
3 : Auto Retry
4 : Language
5 : Set Time
6 ; Set NAM
7 : Set System
8 : Data/Fax
9 : Version
0 : Security
Telefone Celular Modelo SCH-A595
DADOS DO COMPRADOR
Nome:
Endereço:
ESPAÇO A SER PREENCHIDO PELO REVENDEDOR
Revendedor:
Cidade:
Carimbo do Revendedor:
IMPORTANTE: A garantia somente será válida se este
Certificado de Garantia for completamente preenchido no
ato da compra pelo revendedor e apresentado junto com a
Nota Fiscal original de venda deste telefone celular.
Nº série eletrônico
I. ABRANGÊNCIA E PRAZO DE GARANTIA
SAMSUNG ELETRÔNICA DA AMAZÔNIA LTDA. (SAMSUNG), garante
os telefones celulares e acessórios (exceto baterias) contra defeitos de material
e mão-de-obra, em condições normais de uso e manutenção, pelo prazo de
3 (três) meses legal, mais 9 (nove) meses de garantia adicional, num total de
1 (um) ano a partir da data de aquisição do aparelho, identificada pela Nota
Fiscal do produto e pelo preenchimento deste certificado. No caso de telefones
ou acessórios que sejam instalados em veículos, o prazo será contado a partir
da data de aquisição dos mesmos.
A SAMSUNG sem nenhum custo para o usuário, consertará ou substituirá o
telefone celular ou acessórios, durante o prazo de garantia, desde que este seja
enviado a uma assistência técnica SAMSUNG CELULAR, de acordo com os
termos desta garantia, acompanhado deste certificado de garantia e da
respectiva nota fiscal emitida no Brasil. O conserto, a critério da SAMSUNG,
poderá incluir a substituição de peças ou placas, por novas ou
recondicionadas equivalentes. Os telefones celulares, acessórios, baterias,
peças ou placas substituídas serão garantidas pelo restante do prazo original.
Todos os acessórios, baterias, peças, placas, equipamentos de telefones
celulares e acessórios substituídos se tornarão propriedade da SAMSUNG.
II. CONDIÇÕES DE GARANTIA
A SAMSUNG não assume qualquer obrigação ou responsabilidade por
acréscimos ou modificações desta garantia, salvo se efetuadas por escrito em
caráter oficial. Exceto se houver contrato escrito separado entre a
SAMSUNG e o usuário, a SAMSUNG não garante a instalação do
equipamento ou acessório. A SAMSUNG não será de forma alguma
responsável por qualquer acessório que não seja de seu fornecimento, que
anexado ou usado com seus telefones celulares, ou pelo funcionamento de
seus telefones ou acessórios com quaisquer outros acessórios que não os
fornecidos pela SAMSUNG. Tais acessórios estão expressamente excluídos
da garantia, e a SAMSUNG não será responsável por quaisquer danos
causados ao produto, resultantes de tais fatos.
III. ITENS EXCLUÍDOS DESTA GARANTIA
A garantia não cobre:
(a) Defeitos ou danos resultantes do uso anormal pelo cliente do produto,
como superfícies plásticas e outras peças expostas externamente arran-
hadas, trincadas ou quebradas, bem como derramamento de alimentos ou
líquidos de qualquer natureza;
GARANTIA LIMITADA DA SAMSUNG PARA TELEFONES CELULARES
ADQUIRIDOS NAS REVENDAS AUTORIZADAS NO BRASIL
ELECTRONICS
(b) Defeitos ou danos decorrentes de testes, instalação, alteração, modificação
de qualquer espécie em nossos produtos, bem como o conserto realizado por
outras oficinas que não sejam SAMSUNG CELULAR; (c) Quebra ou danos
que não foram constatados no ato da aquisição (gabinete, antena, acessórios,
etc) ; (d) Produtos que tenham tido o número de série removido, adulterado
ou tornado ilegível; (e) Defeitos e danos decorrentes a utilização de
componentes e acessórios não originais SAMSUNG (gabinete, antena,
display, peças em geral, etc.); (f) Defeitos e danos causados por agentes
naturais (enchente, maresia, descarga elétrica e outros).
IV. BATERIA
ASAMSUNG garante pelo prazo de 3 (três) meses legal e mais 3 (três) meses
adicionais, totalizando 6 (seis) meses de garantia a partir da data de
aquisição da bateria. Esta garantia não se aplica, qualquer que seja o tipo de
bateria, se: (a) As baterias forem recarregadas por carregadores que não
sejam originais da SAMSUNG; (b) Qualquer dos selos da bateria tiver sido
violado ou contiver evidências de adulteração; (c) As baterias forem
utilizadas em equipamentos ou serviços que não sejam os equipamentos de
telefonia celular para os quais tenham sido especificados.
V. CONSIDERAÇÕES GERAIS
O único recurso oferecido é o conserto, substituição de peça ou produto, à
opção da SAMSUNG. Esta garantia substitui todas as outras garantias
expressas ou tácitas, incluindo sem limitação, garantias tácitas de
comercialidade e adequação a um fim específico. A SAMSUNG não oferece
nenhuma garantia quanto à cobertura, disponibilidade ou nível dos serviços
oferecidos pela companhia telefônica, em hipótese alguma a SAMSUNG
será responsável por indenização superior ao preço da compra do telefone
celular, por qualquer perda de uso, perda de tempo, inconveniência,
prejuízo comercial, perda de lucros ou economias, por outros danos diretos
ou indiretos, decorrentes do uso ou impossibilidade de uso do produto.
GARANTIA LIMITADA DA SAMSUNG PARA
TELEFONES CELULARES ADQUIRIDOS NAS
REVENDAS AUTORIZADAS NO BRASIL
ATENÇÃO
Não recarregue as baterias SAMSUNG em carregadores que não
sejam os originais. O uso destes carregadores pode ocasionar
graves acidentes.
Licensed by QUALCOMM Incorporated under one or more
of the following Patents.
U.S Patent No. 4,901,307 5,056,109 5,099,204
5,101,501 5,103,459 5,107,225
5,109,390
ELECTRONICS
SAC
☎
0800 124 421
SUA LINHA DIRETA COM A SAMSUNG
SERVIÇO CELULAR
Cidade:
Estado:
CEP:
Telefone:
Nº da Nota Fiscal:
Estado:
Data da Compra:
Este produto está adequado para
uso no ano 2000 e subsequentes.