Samsung Electronics Co SCHN345 Single-Mode Cellular Phone (CDMA) User Manual 00 N345 Cover

Download:
Mirror Download [FCC.gov]
Document ID	422854
Application ID	Gj67coETSrcc7NEEVXoicA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	231.71kB (2896427 bits)
Date Submitted	2004-05-14 00:00:00
Date Available	2004-05-14 00:00:00
Creation Date	2004-05-06 00:37:10
Producing Software	Acrobat Distiller 5.0.2 for Macintosh
Document Lastmod	2004-05-11 10:43:17
Document Title	00-N345-Cover
Document Creator	QuarkXPress.: AdobePS 8.7.3 (301)
Document Author:	pdidotcom

SCH-N345
User’s Manual
ELECTRONICS
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Código No.: GH68-xxxxxA
English. 05/2004.Rev.1.0
Please read this manual before operating your phone, and keep it
for future reference.
FCC RF EXPOSURE INFORMATION
In August 1996 the Federal Communications Commission (FCC) of
the United States with its action in Report and Order FCC 96-326
adopted an updated safety standard for human exposure to radio
frequency electromagnetic energy emitted by FCC regulated
transmitters. Those guidelines are consistent with the safety
standards previously set by both U.S. and international standards
bodies. The design of this phone complies with the FCC guidelines
and these international standards.
Use only the supplied antenna or one that is approved.
Unauthorized antennas, modifications, or attachments could impair
call quality, damage the phone, or result in a violation of FCC
regulations.
Do not use the phone with a damaged antenna. If a damaged
antenna comes into contact with the skin, a minor burn may result.
Please contact your local dealer for a replacement antenna.
Body-worn Operation
This device was tested for typical body-worn operations with the back
of the phone kept 1.5 cm. from the body. To maintain compliance
with FCC RF exposure requirements, use only belt-clips, holsters
or similar accessories that maintain at least a 0.59 inch (1.5 cm.)
separationdistance, between the user's body and the back of the
phone, including the antenna, whether extended or retracted. The
use of belt-clips, holsters and similar accessories should not contain
metallic components in its assembly. The use of accessories that
do not satisfy these requirements may not comply with FCC RF
exposure requirements, and should be avoided.
Vehicle Mounted External Antenna (optional, if
available.)
A minimum separation distance of 7.9 inches (20cm) must be
maintained between a person and the vehicle mounted external
antenna to satisfy FCC RF exposure requirements.
Table of Contents
Important Safety Precautions ......................................................... 7
Unpacking ......................................................................................... 9
Your Phone
Phone Layout ..................................................................................... 10
Display ............................................................................................... 13
Getting Started
Installing the Battery .......................................................................... 16
Charging the Battery ........................................................................... 17
Switching the Phone On/Off ................................................................ 20
Your Phone’s Mode ............................................................................. 21
Call Functions
Making a Call ..................................................................................... 23
Answering a Call ................................................................................. 30
Options During a Call .......................................................................... 31
Using the Caller ID .............................................................................. 32
Viewing Missed Calls ........................................................................... 32
Quickly Switching to Silent Mode ......................................................... 33
Call Forwarding .................................................................................. 33
Call Waiting ........................................................................................ 34
Three-Way Calling ............................................................................... 35
Entering Text
Changing the Text Input Mode ............................................................. 37
T9 Mode .............................................................................................. 38
ABC Mode ........................................................................................... 40
Symbol Mode ...................................................................................... 42
123 Mode ........................................................................................... 42
For more information about RF exposure, please visit the FCC web
site at www
Using the Menus
Scheduler
Accessing a Menu Function by Scrolling ................................................ 43
Accessing a Menu Function by Using Its Shortcut.................................... 44
List of Menu Functions ......................................................................... 45
Today (Menu 4-1) ............................................................................ 67
Scheduler (Menu 4-2) ...................................................................... 69
Task list (Menu 4-3) ......................................................................... 70
Memo pad (Menu 4-4) ..................................................................... 71
Alarm (Menu 4-5) ............................................................................ 72
Calculator (Menu 4-6) ...................................................................... 73
World time (Menu 4-7) .................................................................... 74
Count down (Menu 4-8) ................................................................... 74
Set time (Menu 4-9) ......................................................................... 76
Calls
Outgoing (Menu 1-1) ....................................................................... 48
Incoming (Menu 1-2) ....................................................................... 49
Missed (Menu 1-3) ............................................................................ 49
Erase history (Menu 1-4) .................................................................. 50
Air time (Menu 1-5) ......................................................................... 50
Contacts
Find by name (Menu 2-1) ................................................................ 51
Add by entry (Menu 2-2) ................................................................. 52
Find by entry (Menu 2-3) ................................................................ 55
Find by group (Menu 2-4) ................................................................. 55
Add e-mail (Menu 2-5) ..................................................................... 56
My phone # (Menu 2-6) ................................................................... 56
Memory (Menu 2-7) ........................................................................ 56
Messages
New messages (Menu 3-1) ............................................................... 58
Voice (Menu 3-2) ............................................................................. 60
Inbox (Menu 3-3).............................................................................. 61
Outbox (Menu 3-4) ........................................................................... 62
Draft (Menu 3-5) .............................................................................. 63
Erase msg (Menu 3-6) ....................................................................... 64
Msg setting (Menu 3-7) ..................................................................... 64
Sounds
Ringer volume (Menu 5-1) ............................................................... 77
Ringer type (Menu 5-2) ................................................................... 78
Key beep (Menu 5-3) ....................................................................... 78
Alerts (Menu 5-4) ............................................................................ 79
Voice volume (Menu 5-5) ................................................................. 80
Roam ringer (Menu 5-6) .................................................................. 80
Tone length (Menu 5-7) ................................................................80
Power on/off (Menu 5-8) ................................................................ 81
Display
Menu style (Menu 6-1) ..................................................................... 82
Wallpaper (Menu 6-2) ...................................................................... 82
Backlight (Menu 6-3) ........................................................................ 83
Banner (Menu 6-4) .......................................................................... 83
Contrast (Menu 6-5) ......................................................................... 84
Setup
Auto CSP (Menu 7-1) ....................................................................... 85
Auto key lock (Menu 7-2) ................................................................ 86
Auto answer (Menu 7-3) .................................................................. 86
Call answer (Menu 7-4) .................................................................... 86
Auto retry (Menu 7-5) ..................................................................... 87
Auto hyphen (Menu 7-6) .................................................................. 87
Language (Menu 7-7) ...................................................................... 87
Select NAM (Menu 7-8) ................................................................... 88
Set system (Menu 7-9) ..................................................................... 88
Version (Menu 7-0) .......................................................................... 89
Important Safety
Precautions
Read these guidelines before using your wireless phone.
Failure to comply with them may be dangerous or
illegal. For more detailed safety information, see
“Health and Safety Information” on page 112.
Road Safety at All Times
Do not use a hand-held phone while driving; park the
vehicle first.
Security
Lock phone (Menu 8-1) .................................................................... 90
Change lock (Menu 8-2) .................................................................. 91
Restriction (Menu 8-3) ..................................................................... 91
Emergency # (Menu 8-4) ................................................................. 91
Send PIN (Menu 8-5) ....................................................................... 92
Erase contacts (Menu 8-6) ................................................................ 93
Reset phone (Menu 8-7) .................................................................. 93
Switching Off When Refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using them in
aircraft is both illegal and dangerous.
Health and Safety Information
Precautions When Using the Batteries .................................................. 94
Road Safety ........................................................................................ 96
Operating Environment ........................................................................ 98
Electronic Devices ................................................................................ 98
Potentially Explosive Atmospheres ..................................................... 100
Emergency Calls ................................................................................ 101
Other Important Safety Information ................................................... 102
Care and Maintenance ....................................................................... 103
Glossary ........................................................................... 105
Index................................................................................. 108
Quick Reference Card......................................................... 111
Switching Off in Hospitals
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special Regulations
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger
(in a hospital for example).
Sensible Use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Accessories and Batteries
Use only Samsung-approved accessories and batteries.
Unpacking
Your package contains the following items:
Handset
Battery
Travel adapter
Hand strap
Qualified Service
Only qualified service personnel may install or repair
your phone.
User’s manual
In addition, you can buy the following accessories for
your phone from your local Samsung dealer:
• Standard battery
• Travel adapter
• Car charger
• Straight headset
• Simple handsfree car kit
• PC data cable
• PC link CD
Your Phone
Your Phone
Keys
Phone Layout
Key (s)
The following illustrations shows the main elements of
your phone.
Headset jack
Earpiece
Display
Functions
Performs the functions indicated by the
text above them, on the bottom line of
the display.
In Menu mode, scrolls through the menu
options.
In Standby mode, quickly enters the
following menus respectively:
•
: Messages
•
: Ringer type
•
: Scheduler
Navigation
keys
•
: Calculator
Soft key (left)
Soft key (right)
Send key
Power on/off/
End key
Deletes characters from the display.
In Menu mode, returns to the previous
menu level.
Cancel/clear
key
Alphanumeric
keys
Special function
keys
Microphone
Adapter jack
10
Makes or answers a call.
In Standby mode, retrieves the most
recent numbers dialled, received, or
missed. Redials the last number when
pressed and held.
Ends a call. Also switches on and off the
phone when pressed and held.
In Menu mode, cancels your input and
returns to Standby mode.
11
Your Phone
Key
Functions (continued...)
Enters numbers, letters, and some
special characters.
Your Phone
Display
Layout
The display comprises two areas; an upper line of fixed
icons, and the lower text and graphic area.
In Standby mode, activates Key Guard
mode when pressed and held.
In the text entry mode, changes the case
of letters.
In Standby mode, enters or exits Silent
mode on and off when held down.
Also, it is used at various times when you
dial, especially when using teleservices.
Icons
Text and
graphics area
Icons
Signal Strength : Shows the received
signal strength. The greater the number of
bars, the better the signal strength.
Service: Appears when a call is in
progress.
No Service: Appears when you are outside
a service area. When it appears, you cannot
make or receive calls.
Roaming: Appears when you are out of
your home area and have registered onto a
different network, when travelling in other
countries, for example.
12
13
Your Phone
New Message: Appears when a new text
message is received.
Digital Mode: Indicates when the phone is
in Digital mode. When it is not displayed,
you are in Analog mode.
1X Mode: Appears when 1X system is
acquired.
Vibrator: Appears when the ringer volume
for calls set to Vibrate, High+Vib, or when
Silent mode is activated.
Your Phone
Backlight
The display is illuminated by a backlight. When you
press any key, the backlight illuminates. It turns off if no
key is pressed within a given period of time, depending
on your setting in the Backlight menu (Menu 6-3). The
backlight remains on at all times when the phone is
connected to an optional car kit.
To specify the length of time for which the backlight is
active, set the Backlight menu; see page 79 for further
details.
Battery Strength: Shows the level of your
battery. The more bars you see, the more
power you have left.
Another Icons
Ringer Off: Appears when you set the
ringer volume for calls to Off.
Silent Mode: Appears when Silent mode is
activated.
Auto Answer Mode: Appears when auto
answer feature is activated.
Alarm: Appears when you set an alarm to
ring at a specified time.
14
15
Getting Started
Getting Started
3. Place the battery cover, as shown, and slide it toward
the top of the phone until it clicks into place.
Installing the Battery
Your phone is powered by a rechargeable Li-ion battery.
Use only approved batteries and chargers. Ask your local
Samsung dealer for further details.
Note: You must fully charge the battery before using
your phone for the first time. A discharged battery
is fully recharged in approximately 120 minutes
for a standard battery.
1. Remove the battery cover by pressing down the
groove and then sliding the cover out.
Charging the Battery
Your phone is powered by a rechargable Li-ion battery. A
travel adapter comes with your phone. Use only
approved batteries and chargers. Ask your local
Samsung dealer.
You can use the phone while the battery is being
charged, but this will cause the battery to charge more
slowly.
2. Place the battery into the battery slot, making sure
that the metal contacts is facing down.
16
1. With the battery in position on the phone, plug the
connector of the travel adapter into the adapter jack
at the bottom of the phone.
17
Getting Started
Getting Started
2. Plug the adapter into a standard AC wall outlet.
The Battery Strength icon on the display repeats
filling and emptying itself to indicate that the battery
is charging.
3. When charging is finished, unplug the adapter from
both the power outlet and the phone by pressing the
buttons on both sides of the connector and pulling the
connector out.
➀
➀
➁
Low Battery Indicator
You can easily tell if your battery needs to be recharged
by checking the battery strength icon (
) at the
upper-right corner of your phone’s display. The presence
of all three bars indicates a full charge, two bars
indicates a smaller charge and one bar indicates an
even smaller charge. No bars (the battery icon is empty)
means your battery must be charged.
When the battery charge level gets low, the battery
sensor blinks an empty battery icon (
) and sounds a
warning tone. If the battery level gets too low, the
phone will automatically turn off. Unfortunately, if this
happens, you’ll lose whatever you are doing, and your
phone call will cut off. Watch the battery strength icon
and make sure your battery is adequately charged.
Note: Do not remove the battery from the phone without
unplugging the adapter while it is charging.
Otherwise, the phone may be damaged.
18
19
Getting Started
Getting Started
Switching the Phone On/Off
Your Phone’s Mode
1. Hold down
until the power-on animation is
displayed to switch the phone on.
Standby Mode
When the system locates services, the greeting
message displays along with the current date and
time. You can now place and receive calls.
If your phone is out of service, the No Service icon
( ) appears on the display. In this case, you cannot
make and receive calls. You can try again later when
service is available.
Note: You can change the LCD language using the
Language menu option (Menu 7-7); for further
details, refer to page 81.
2. When you wish to switch the phone off, hold down
until the power-off animation is displayed.
Standby is the most basic state of your phone. The
phone goes into Standby mode after you turn it on, or
whenever you briefly press
. When your phone is in
Standby mode, you will typically see the greeting
message and current date and time. If you enter a phone
number, you can press
to dial it or press
to
save it in the internal Contacts.
Press
at any time to return to Standby mode. Be
careful; if you are on a call when you press
, you
will disconnect the call and return to Standby mode.
Press
several times or hold it down to return to
Standby mode without ending the call.
The main menu can be accessed when you are in
Standby mode.
Talk Mode
You can place and answer calls only when your phone is
turned on. During a call, the phone is in Talk mode.
While you are in Talk mode, pressing
gives you a
list of options. See page 34 for details on the options.
20
21
Getting Started
Call Functions
Power Save Mode
Your phone comes with a Power Save feature that will
automatically be activated if your phone is unable to
find a signal after 10 minutes of searching. While this
feature is active, the phone’s battery charge is
conserved. The phone will automatically recheck for a
signal periodically. To manually force the phone to
recheck for a signal, press any key. A message on the
display lets you know when your phone is operating in
Power Save mode.
Key Guard Mode
You can lock the keypad by pressing and holding
in Standby mode. By doing this, you can prevent
accidental key pressing.
To unlock the keypad, press
and then
Lock icon
displays in the display.
. The
When you have an incoming call or an alarm occurs in
Key Guard mode, the mode is automatically deactivated
and the phone goes to Standby mode.
Making a Call
In Standby mode, key in the area code and phone
number and press
When entering a number, pressing
allows you to
insert a pause or a hyphen. For more details about
pause dialing, see page 28.
Note: If you have activated Auto retry menu (Menu 7-5),
the phone automatically retries to make the call
when the line is busy or the remote person does
not answer you.
Correcting the Number
To clear the ...
last digit displayed
whole display
Note: You can set the phone to automatically lock the
keypad after a specified period of time, in the
Auto key lock menu (Menu 7-2). See page 88.
Press ....
for more than one
second.
Ending a Call
When you want to finish your call, briefly press
The call time, the length of the call, displays briefly and
the phone returns to Standby mode.
22
23
Call Functions
Call Functions
Redialing the Last Call
To redial the last call you made, press
Standby mode.
Prepend Dialing
twice in
Your phone stores the last 10 incoming or outgoing
calls. To recall any of these numbers:
1. If there are any characters on the display, press
to return to Standby mode.
2. Press
. The list of the call logs is displayed.
3. Use
or
to scroll through the list until you
select the required name or number.
4. Press
to dial the number.
The prepend option lets you add digits, such as area
codes and network feature activation codes to a phone
number that is in your internal Contacts or call Logs.
To prepend existing phone numbers in the Contacts or
call logs:
1. Access a call log entry referring to page 24 or a
Contacts entry referring to page xx.
2. When the desired phone number displays, press
to access the option menu.
3. Use
or
to scroll through the list until
Prepend option is highlighted.
4. Press
Making a Call from the Contacts
You can store the phone numbers called regularly in
memory, which is called the Contacts. You then simply
recall the number to dial. For further information on the
Contacts feature, refer to page 55.
5. Enter the area code or feature code.
6. Press
to dial the number.
Emergency Dialing
You can place an emergency call from your emergency
number list, even if your phone is locked or all outgoing
calls are restricted. For further information on
emergency numbers, refer to page 98.
24
25
Call Functions
Call Functions
Speed Dialing
Three-Touch Dial
Once you have stored phone numbers in the Contacts
memory, you can dial them easily by pressing a few
keys.
Memory locations 100 through 500 are special threetouch locations.
One-Touch Dial
Memory locations 001 through 009 are special onetouch locations. You can dial the phone numbers stored
in those memory locations simply by pressing one
number key.
Press and hold the third digit of the memory location
containing the number to be dialed.
For example: Location no. 009
Press
and hold.
The number (and name) stored is displayed, then dialed.
Two-Touch Dial
Memory locations 010 through 099 are special twotouch locations.
Press the second digit briefly, then hold down the third
digit of the memory cell.
For example: Location no. 023
Press
briefly and hold down
The number (and name) stored is displayed, then dialed.
Press the first and the second digit briefly, then hold
down the third digit of the memory cell.
For example: Location no. 123
Press
and
briefly, then hold down
The number (and name) stored is displayed, then dialed.
Note: When several numbers are saved in one location,
only the phone number which is specified with
the Speed dial label category will be
automatically dialed. For details, refer to page 57.
Pause Dialing
When you call automated systems, like banking
services, you are often required to enter a password or
account number. Instead of manually entering the
numbers each time, you can store them in your
Contacts, separated by special characters which are
called pauses.
Storing Pauses in a Contacts Entry
To store a number in your Contacts that contains pauses:
1. Enter the phone number you want to store, such as
the bank’s teleservice phone number.
26
27
Call Functions
Call Functions
2. Press
to display the menu options.
Manual Pause Dialing
3. Press
type.
or
You can enter pauses manually during the dialing
process.
to highlight the desired pause
• P pause: The letter “P” displays within the number,
meaning that a hard pause will occur at that point
in the calling sequence.
• T pause: The letter “T” displays in the number,
meaning that a timed (2-second) pause will occur at
that point in the calling sequence.
• Hyphen: allows you to insert a hyphen.
4. Press
to enter a pause. Continue entering
numbers and using
to enter pauses.
5. Store the number in your Contacts as you normally
would by pressing
and following the screen
prompts.
1. Enter the phone number of the service you want to
connect to, such as a bank’s teleservice phone
number.
2. Press
to display the menu options.
3. Press
type.
or
to highlight the desired pause
4. Press
to enter a pause. Continue entering
numbers and using
to enter pauses.
5. When you finish entering the numbers, press
dial the number.
to
Pause Dialing from a Stored Contacts Entry
1. Dial the number from the Contacts.
2. If you stored the number using “T” pause, simply call
the number form the Contacts.
If you stored the number using “P” pause, wait for
the appropriate prompt for the number, such as a
credit card number or a bank account number.
3. When prompted, press
to send the DTMF (DualTone Multi-Frequency) number that follows your
pause.
28
29
Call Functions
Call Functions
Answering a Call
Options During a Call
When somebody calls you, the phone rings and the
phone icon is displayed in the middle of the display.
Your phone provides a number of functions that you can
use during a call. As many of these options are network
services, you may not be able to use all of them at all
times.
If the caller can be identified, the caller’s phone number
(or name if pre-stored in your Contacts) is displayed. If
the caller cannot be identified, only the phone icon
appears.
1. To answer a call, press
. Your phone is preset to
answer a call when the key is pressed via the Call
answer menu (Menu 7-4).
If the menu is set to Any key, you can answer a call
by pressing any key except for
. When you set
the menu to SEND key, you must press
to
answer a call. For details about the menu, see page
91.
2. End the call by pressing
Note: You can answer a call while using the Contacts or
menu features. The current operation will be
interrupted.
Press
during a call to access the following options:
Mute/Quit: allows you to switch your phone’s
microphone off, so that the other party cannot hear you.
Example: You wish to say something to another person
in the room but do not want the other party to hear you.
Calls: allows you to access the Calls menu.
Contacts: allows you to access the Contacts menu.
Silent/Quit: does not transmit the key tones. It allows
you to press keys without hearing annoying key tones
during a call.
Send tel #: allows you to send the telephone number to
the other caller.
My phone #: shows your phone number.
Version: allows you to view the software and hardware
version of your phone.
Speaker phone: allows you to make a conversation
through the speaker on the back side of the phone.
30
31
Call Functions
Call Functions
SEND:Send DTMF : allows you to send the DTMF
(Dual-Tone Multi-Frequency) tones of the currently
displayed number. DTMF tones can be used to control
electronic phone service, such as bank-by-phone or
voice mail. During a call, key in the digits you want to
send as DTMF tones, for example, the bank account
number and password.
Quickly Switching to Silent Mode
Using the Caller ID
To enter Silent mode, press and hold down
until
“Entering Silent Mode” and the Vibration icon ( )
appear.
This feature tells you who is calling you by displaying
the caller’s number when the phone rings. If a caller’s
name and number are stored in the Contacts, the
corresponding name is also displayed. If you call
someone who has this feature, your phone number will
be displayed on the their phone.
Note: Contact your service provider to set up the Caller
line identification service.
Viewing Missed Calls
Silent mode disables all sounds on the phone. This
feature is best used in situations where the phone might
disturb others, such as in a meeting, in a library or at
the theater. Your phone can be set to Silent mode with
one press of a key.
Pressing and holding down
once again exits Silent
mode. The icon is no more displayed.
Call Forwarding
This feature provides the option of forwarding incoming
calls to another phone number, even while your phone is
turned off. Activating Call Forwarding does not affect
outgoing calls made from this phone. Contact your
service provider to activate Call Forwarding.
Your phone keeps a list of calls that you do not answer
when the phone is on and service is available. The
phone indicates a missed call by displaying a text
notification on the screen. Additionally, if caller
information is available, the screen displays the phone
number of the most recent missed call.
Press
32
to call the displayed number.
33
Call Functions
Call Functions
Call Waiting
Three-Way Calling
Call Waiting lets you receive a second call during
conversation. Your phone notifies you of a call waiting
by beeping an displaying “Call Waiting.”
This feature enables you to conduct conference calls
with two separate parties at the same time. The phone
records each party into the Outgoing Calls log. Also, You
are billed airtime for each outgoing call separately.
Your phone provides the option of turning the Call
Waiting feature on and off if you have subscribed to the
service. Call Waiting is on by default in the phone. If you
choose to have a undisturbed conversation, simply turn
off the feature for the current call.
Note: Contact your service provider to activate the Call
Waiting service.
To answer a waiting call:
1. To answer the call, press
. The phone connects
the calling party and places the current party on hold.
2. Press
again to switch between the two parties.
Note: If you do not respond to a Call Waiting
notification, the phone will forward the call to
voicemail or another number that you have set
up. Contact your service provider for more
information.
34
Note: Contact your service provider to activate ThreeWay Calling.
To place a Three-Way call:
1. During a conversation, enter the phone number for
the third party, and then press
. The phone places
the other party on hold and dials the third party.
2. When you are connected to the third party, press
again to begin your three-way call.
If one of the callers (not you) hangs up, you and
remaining caller stay connected. If you initiated the call
and you hang up first, all three parties are disconnected.
35
Entering Text
Entering Text
Changing the Text Input Mode
At many times when using your phone, you will need to
enter text; for example, when storing a name in the
Contacts, creating your personal greeting or scheduling
events in your calendar. You can enter alphanumeric
characters into your phone using your phone’s keypad.
When you are in a field that allows characters entry,
you should notice the text input mode indicator on the
display.
Example: Entering a name for a Contacts entry
Your phone has the following text input modes:
Text mode indicator
Name:
• T9 word: This mode allows you to enter words with
only one key press per letter. Each key on a keypad
has more than one letter - a single press on
could be J,K or L. The T9 mode automatically
compares your key presses to an internal linguistic
database to determine the correct word. The T9
mode requires far fewer keystrokes than the
traditional multi-tap method, ABC mode.
• ABC: This mode allows you to enter letters by
pressing the key labeled with the desired letter once,
twice, or three times until the letter appears on the
display.
• Symbol: This mode allows you to enter special
characters.
• 123: This mode allows you to enter numbers.
Options
You can change the text input mode by pressing
To change to another text input mode:
1. Press
Name:
MODE
T9 Word
ABC
Symbol
Options
2. Scroll to the desired mode by pressing
or
Note: If you want to exit the menu without changing to
a new mode, press
3. To select the highlighted mode, press
4. You will find the selected text input mode indicator on
the display.
36
37
Entering Text
Entering Text
T9 Mode
Smart Punctuation
To type a word, press the keys corresponding to the
letters you need. Remember the following as you are
typing:
Periods, hyphens, and apostrophes are available by
pressing
. T9 applies rules of grammar to insert
the correct punctuation. Notice that
is used twice
in this example to display two punctuation marks.
1. Press the keys on the phone just once per desired
letter. For example, to enter “Hello,” press
, and
‘
2. The word you are typing appears on the display. It
may change with each key press.
Including a Number
3. Type to the end of the word before editing or deleting
any keystrokes.
You can include a number between letters without
exiting the T9 input mode. Press and hold the desired
number key.
4. Put a space between each word by pressing
If the word that appears on the display is not the
word that you desire, press
one or more times
to display alternative word choices for the keys you
have typed. For example, both “Of” and “Me” have
the sequence of
and
. The phone displays
the most commonly used choice first.
5. Continue entering the next word.
Changing the Case
Your phone offers three cases;
• : initial letter is capitalized
• : all letters are capitalized
• : all letters are lower case
Press
one or more times to display the
appropriate case indicator, and begin typing normally.
Erasing Letters and Words
Press
one or more times to erase letters to the left.
Press and hold
to erase all.
38
39
Entering Text
Entering Text
ABC Mode
Changing the Case
When typing in ABC mode, you should press the keys
labeled with the required letter:
- Once for the first letter
- Twice for the second letter
- And so on.
This method is called multi-tap typing.
For example, you press
display the letter “C” and
display the letter “K.”
three times quickly to
two times quickly to
The cursor moves to the right when you press a different
key. When entering the same letter twice or a different
letter on the same key, just wait for a few seconds for
the cursor to move to the right automatically, and then
enter the next letter.
Refer to the table below for the list of characters
assigned to each key.
Key
Your phone offers three cases;
• : initial letter is capitalized
• : all letters are capitalized
• : all letters are lower case
Press
one or more times to display the
appropriate case indicator and begin typing normally.
Inserting a Space
Press
to put a space between each word.
Erasing Letters and Words
Press
one or more times to clear letters to the left.
Press and hold
to erase all.
Characters in the Order Displayed
1 . @ , : ? - ; ’ / ( ) ! # % & * <
> _ + = ” \ { } $ [ ]
M N
W X
40
(Caps Lock mode)
41
Entering Text
Using the Menus
Symbol Mode
Symbol mode enables you enter symbols.
The menus and submenus can be accessed by scrolling
or by using the shortcuts.
Name:
123456789
!@ # % & * < > <<
Press
or
>>
The phone offers a range of functions that allows you to
tailor the phone to your needs. These functions are
arranged in menus and submenus.
155
to display more symbols.
Press the keys corresponding to the desired symbols.
The phone automatically switches back to the text input
mode used just prior to selecting Symbol mode.
123 Mode
123 mode enables you to enter numbers. Press the keys
corresponding to the desired digits, and manually switch
back to text entry mode of choice.
Accessing a Menu Function by Scrolling
1. In Standby mode, press
to access Menu mode.
2. Press the Navigation keys to reach the main menu; for
example, Setup. Press
to enter the menu.
3. If the menu contains any submenus: for example,
Language, find the one you want by pressing the
Navigation keys. Press
to enter the submenu.
If the menu you selected contains submenus, repeat
this step.
4. Scroll with
choice. Press
or
to find the setting of your
to confirm the chosen setting.
Notes:
• You can return the previous menu level by pressing
• You can exit the menu without changing the menu
settings by pressing
42
43
Using the Menus
Using the Menus
Accessing a Menu Function by Using Its
Shortcut
The menu items (menu, submenus, and setting options)
are numbered and can be accessed quickly by using
their shortcut numbers.
List of Menu Functions
1. Calls
(see page 52)
1: Outgoing
2: Incoming
3: Missed
4: Erase history
5: Air time
Note: The numbers assigned to each menu function are
indicated on the list on page 48.
1. In Standby mode, press
to access Menu mode.
2. Enter the first digit of the shortcut number. Repeat
this for each digit of the shortcut number.
2. Contacts
(see page 55)
1: Find by name
2: Add new entry
3: Find by entry
4: Find by group
5: Add e-mail
6: My phone #
7: Memory
3. Messages
(see page 61)
1: New messages
2: Voice
3: Inbox
4: Sent
5: Draft
6: Erase msg
Example: Changing the ringer type for voice calls
Press
, and
1: Last call
2: Total
3: Life time
4: Erase total
5 for Sounds, 2 for Ringer type and 1 for Voice
calls menu function.
3. Find the setting of your choice pressing
or
and then press
to confirm the chosen setting.
7: Msg setting
44
1: Voice
2: Old inbox
3: New inbox
4: Sent
5: Draft
6: All messages
1: General
2: New message
45
Using the Menus
4. Planner
(see page 66)
5. Sounds
(see page 75)
Using the Menus
1: Today
2: Scheduler
3: Task list
4: Memo pad
5: Alarm
6: Calculator
7: World time
8: Count down
9: Set time
1: Ringer volume
2: Ringer type
3: Key beep
4: Alerts
5: Voice volume
6: Roam ringer
7: Tone length
8: Power on/off
46
6. Display
(see page 79)
1: Menu style
2: Wallpaper
3: Backlight
4: Banner
5: Contrast
7. Setup
(see page 90)
1: Auto CSP
2: Auto key lock
3: Auto answer
4: Call answer
5: Auto retry
6: Auto hyphen
7: Language
8: Select NAM
9: Set system
0: Version
8. Security
(see page 97)
1: Lock phone
2: Change lock
3: Restriction
4: Emergency #
5: Send PIN
6: Erase contacts
7: Reset phone
1: Calls
2: Messages
3: Alarm/Schedule
1: Voice calls
2: Messages
3: Alarm/Schedule
1: Minute beep
2: Service
3: Connect
4: Disconnect
5: Fade
6: Roam
47
Calls
Calls
You can use the Calls menu to:
• View and dial the last outgoing, incoming or missed
numbers.
• Erase the numbers in the call log memory.
• View the duration of calls.
When you access the menu options, the following
options are available:
Talk: dials the selected number.
Save: allows you to save the number in the Contacts.
Prepend: allows to add an area code or feature code to
the number before calling the number.
Outgoing
Menu 1-1
Note: You can also access this menu by pressing
in Standby mode.
Incoming
Menu 1-2
The phone stores up to 20 outgoing calls you dialed.
When you access this menu, a list of outgoing calls is
displayed.
This option lets you view the last 20 calls received if you
are subscribed to the caller ID service. When you access
this menu, a list of the incoming calls is displayed.
1. Scroll to the desired number (or name if saved in the
Contacts).
For further information on scrolling through the list and
accessing the call log, see “Outgoing” on page 52.
2. Press
to select the highlighted number.
The dialed number (and name if stored in the
Contacts) is displayed.
Missed
3. To...
place a call to
the displayed
number
use the menu
options
exit the call log and
return to Standby
mode
48
Press...
. For details about the
options, see the following
page.
Menu 1-3
If Caller Line Identification is available (contact your
service provider), your phone keeps a list of 20 missed
calls that you failed to answer.
For further information on scrolling through the list and
accessing the call log, see “Outgoing” on page 52.
49
Calls
Erase history
Menu 1-4
You can erase the entries stored in each of the three call
logs; outgoing, incoming or missed calls. You can also
erase all three logs at one time.
When you see a confirming message, press
erase the log. If you want to cancel, press
to
Air time
Menu 1-5
Your phone records the amount of air time, or talk time,
used. Using this option, you can view the number of the
calls to or from your phone, and the air time for all calls.
You can easily erase the air time record at any time.
Note: This feature is not intended to be used for billing
purposes.
The following options are available:
Last call: shows the air time of the last call.
Total: shows the number of all calls made to and the
total duration of the calls since the air time counter was
last set to zero by using the Erase total option.
Life time: shows the number and total duration of all
calls made to or from your phone since the phone was
shipped from the factory. The lifetime cannot be deleted
even though you reset your phone using the Reset
phone or Erase contacts feature.
Contacts
The Contacts allows you to store frequently used phone
numbers and the associated names in your personal
directory to make it easy for you to place a call without
having to remember or enter the phone number. You can
store up to 500 numbers, each having up to 7 different
numbers.
Find by name
Menu 2-1
This option allows you to find an entry by entering a
person’s name.
1. Press
or
to scroll to the desired name.
Or enter the first few letters of the name you want to
find. The phone shows the first entry matching your
input.
2. When the desired entry is highlighted, press
access the entry.
to
Note: All of the numbers assigned to an entry display,
including numbers stored into different
categories. Press
or
to find the
number you want.
3. Press
to place a call.
Erase total: erases the “Total” air time measurement
and resets the air time counter.
50
51
Contacts
Contacts
If you press
with viewing the details, you can
access the following options:
Talk: dials the number.
Creating a New Entry
1. When you are prompted to confirm adding a new
entry, press
Add #: allows you to add a new entry or a number to
the current entry.
2. Enter a phone number and press
Edit: allows you to edit the phone number, name,
location number, category and so on.
3. Highlight the desired option you want to customize by
pressing
or
. The following options are
available:
Prepend: allows you to add digits, such as area codes
and network feature activation codes to a phone
number.
• New name: allows you to enter a name of up to
12 characters. For further information on how to
enter text, see page 39.
Erase: erases the number.
• Entry: the first available location displays. If
necessary, enter the location number using the
number keys.
Name ring: allows you to specify a unique tone or
melody to alert you to an incoming call from the number.
E-mail addr: allows you to store an e-mail address in
the entry.
Add new entry
Menu 2-2
This menu allows you to store a number with a name in
the Contacts. You can save a person’s various numbers,
such as workplace number, mobile number and fax
number, into one entry. Using this feature, you can keep
someone’s information together. It also helps you to find
numbers easily in the Contacts.
52
• Secret: allows you to set the number to secret.
This prevents a number from being displayed when
it is accessed or dialed by unauthorized users. Only
a person with your phone’s lock code can view the
secret number.
• Speed dial: allows you to select the category of
number to be stored. The available categories are
Speed dial, Home, Office, Mobile, Pager, Fax,
and No label.
• Relation: allows you to select one of four
predefined relation groups, where the entry is
included. Grouping the entries enables you to
locate only the numbers in the desired group.
53
Contacts
Contacts
• Inactive: allows you to specify a unique ring type
for the entry. By selecting different tones, incoming
voice calls having a caller ID can be distinguished
from those that do not.
4. To edit the option setting, press
desired setting by pressing
or
required name or number. Press
input or selection.
. Select the
, or enter the
to accept your
5. Repeat steps 3 and 4 to customize another option.
6. Press
to save the entry.
Storing Phone Numbers at Call’s End
To store a phone number at the end of your call:
1. Press
to end the call. The call time and the
phone number display.
2. To store the phone number, press
3. Follow the instructions in “Creating a New Entry” on
page 57.
Find by entry
Menu 2-3
This option allows you to find an entry by entering its
location number.
1. Enter the location by pressing the numeric keys.
2. When the desired entry highlighted, press
to
view the details, press
to make a call to the
number.
Note: All of the numbers assigned to an entry display,
including numbers stored into different
categories. Press
or
to find the
number you want.
While viewing entry details, you can access the menu
options by pressing
. For further information on the
options, refer to the Find by name menu on page 55.
Find by group
Menu 2-4
This option allows you to find an entry by selecting its
relation group.
1. Press
or
until the group containing the entry
you want appears at the bottom of the display.
The phone lists all entries in the selected group.
2. Scan through the list using
desired entry.
3. Press
54
or
to view the details or
to find the
to make a call.
55
Contacts
Messages
Add e-mail
Menu 2-5
This option allows you to store an e-mail address
instead of a number.
1. When the phone asks if you want to add a new entry,
press
2. Enter the e-mail address and press
. For further
information about entering text, see page 39.
3. Follow from step 3 in “Creating a New Entry” on page
57.
My phone #
Menu 2-6
This option shows your own phone number.
After viewing the number, pressing
to Standby mode.
Memory
or
returns
Menu 2-7
Using this menu option, you can check how many names
and numbers are stored in the Contacts and how many
free locations remain.
Your phone can receive voicemail messages, text
messages, and pages. Also, your phone can send text
messages and pages if you system supplier provides this
service.
When the phone receives a message, an alert sounds, a
text notification displays along with the name and
phone number of the caller if available. The New
Message icon ( ) remains on the screen until you
read the new text, numeric page or web browser
message, or until you listen to the new voicemail
messages.
If you are on a conversation and you receive an
incoming message, your phone automatically mutes the
ringer. This is to avoid ringing in your ear while you are
trying to converse.
Note: You can quickly access the Messages menu by
pressing
in Standby mode.
Message-related Icons
Duplicated message: indicates that a duplicated
messages was sent.
Filed Message: displays if a message has been
filed.
Message sent: displays when outgoing
messages are transmitted.
Message read: displays when you have read a
message.
56
57
Messages
Messages
Message received: indicates that an incoming
text, voicemail, page or browser message has
been received.
3. When you finish entering the message, press
4. Press
or
to select one of the following
option and press
to edit your input or setting.
Multi messages: displays if multi messages are
successfully delivered.
• Send to: edits the destination phone number you
entered in step 1.
Message delivered: displays if a sent message
is delivered.
• Msg: edits the message contents you entered in
step 2.
Message failed: displays if a message was not
sent.
• Call back #: edits the callback number. Enter the
new number to replace the current number. The
default call back number is your phone number.
Urgent message: displays if a message is
urgent.
New messages
Menu 3-1
You can create short text messages and numeric pages,
and then send them to other mobile numbers.
Note: Message transmission is only supported in digital
networks and if service is provided by your
service provider.
1. Enter a destination phone number or an e-mail
address using the numeric keys and press
You can select a number from your Contacts by
pressing
2. Enter the message contents or a numeric page. For
further details about how to enter text, see page 39.
• Options: allows you to change the message
options. Press
or
to scroll to the required
item and press
to change the setting.
- Priority: select the message priority.
- Delivery ack: turn the delivery acknowledgment
feature on or off. when this is activated, the
network informs you of whether or not the
message has been read by the recipient .
- Message: set if the phone will save the message
in the outbox after transmission. When you select
Prompt save, the phone will ask if you want to
save the message.
• Draft: stores the message in the Draft menu
(Menu 3-5).
Note: The Call Back, Delivery Ack, and Message
options can be preset to default values in the
Msg setting menu (Menu 3-7).
5. Press
58
to send the message.
59
Messages
Messages
Voice
Menu 3-2
When a new voice message is received, the voicemail
notification displays. If multiple new voicemails are
received but not reviewed, only the last received
voicemail information will be displayed. The display
information will include time/date stamp, the total
number of the new voicemails, and the callback number.
Press
and the sender’s callback number, if available,
or the voice server number is displayed. To listen to the
message, press
again to connect to the voice server
and and follow the voice prompt.
When you access the Voice menu, information of the
latest voice message is displayed. To listen to the
message, press
twice.
Inbox
Menu 3-3
Your phone can store up to 40 pages and text messages
all together in the Inbox, Outbox and Filed Message box.
If the message memory is full, a warning message is
displayed and the phone rejects additional messages
until you erase the obsolete ones.
Press
or
to scroll to one of the messages in the
list and press
. The phone displays the message
contents. If necessary, press
or
to scan through
the contents.
You can dial the callback number of the message by
pressing
twice.
While viewing a message, press
following options:
to access the
Reply: allows you to send a reply message to the
sender.
Forward: allows you to send the message to another
person.
Delete: deletes the message from the Inbox.
Save addr: allows you to save the sender’s phone
number into the Contacts. For further information about
storing a number, see page 57.
60
61
Messages
Messages
Outbox
Menu 3-4
Your phone can store up to 40 pages and text messages
all together in the Inbox, Outbox and Filed Message box.
You can review or resend the messages stored in the
Outbox, if needed.
Press
or
to scroll to the desired message and
press
. The display shows the time and date when
the message is created, the designated number (and
name if saved in the Contacts) and the message
contents. If necessary, press
or
to scan through
the contents.
While reviewing a message, press
following options:
to access the
Re-send: allows you to resend the message. For further
information about sending a message, see page 103.
Delete: deletes the message from the Outbox.
Draft
Menu 3-5
Your phone can store draft messages that are yet to be
sent in the filed message folder. You can access this
folder at a later time to edit and send the message.
To store a message to the filed message box:
1. Follow the process of writing a new message on page
103.
2. When you finish inputting the message, press
for options.
3. Select Draft, and press
in the Draft box.
. The message is stored
When you access the Draft menu, the list of the stored
messages appears. Press
or
to scroll to one of
the messages in the list and press
While viewing a message, press
following options:
to access the
Edit: allows you to edit and send the message.
Delete: deletes the message.
62
63
Messages
Messages
Erase msg
Menu 3-6
Using this menu option, you can erase all messages in
each of five message boxes; Voice mail box, Old
inbox, New inbox, Sent and Draft message box. You
can also erase all of the messages at one time by
selecting the All messages option.
Msg setting
Menu 3-7
Using this menu, you can set up various options for
messages.
General
(Menu 3-7-1)
You can set up the following options for incoming
messages.
Scroll timer: If an incoming message is too long
for the display, the phone displays it by scrolling the
screen automatically. You can set the screen to scroll
automatically or not.
- 1~5 seconds: set how often the phone scrolls to the
next screen.
- Off: you need to scroll to the next screen manually using
or
64
Msg reminder: when a message is received, the phone
alerts you by sounding the selected ringer. You can set
how often this will happen.
- Off: the phone doesn’t alert you.
- Once: the phone alerts you just once.
- Every 2 min: the phone alerts you every 2 minutes.
Voice mail #: You can view the number of the voice mail
center. If necessary, edit the number and press
New message
(Menu 3-7-2)
You can set up the default settings of following options
for creating a new message.
Callback #: allows you to set the call back number. Your
phone number is preset at the factory.
Save message: allows you to set whether you want the
transmitted message to be saved in the Outbox or not.
- Do not save: the phone does not save the message.
- Prompt save: the phone asks you if you want to save it
or not.
- Auto save: the phone saves the message
automatically.
Entry method: allows you to select the text input mode
between T9 word and Alphabet (ABC).
65
Messages
Planner
Delivery ack: allows you to activate or deactivate the
delivery acknowledgement feature. Select On to turn on
the feature or Off to turn it off.
Canned msg: allows you to edit 10 canned messages.
You can use the messages when writing a message.
The Scheduler feature enables you to:
• Keep track of important dates and events and view
the calendar.
• Create a list of things to do.
• Check the current time in another part of the world.
• Use the phone as a calculator.
• Set an alarm to ring at a specified time.
Today
Menu 4-1
You can schedule up to 9 events for the current day
indicating each event’s start and end time. You can be
alerted by a schedule alarm before an event
commences. Events scheduled for future dates
automatically appear on your Today events schedule on
that day.
Scheduling an Event
1. Enter your event contents.
You can enter up to 32 characters. For more
information about entering characters, see page 39.
2. Press
to accept your input.
3. Enter the start time using the numeric keys and press
You can move to each input field using
and
. You must enter the hour in a 12-hour format.
Press
for A (AM) or press
for P (PM).
66
67
Planner
Planner
4. Enter the end time and date using the numeric keys
and press
Scheduler
5. Select when the alarm will inform you of your event
by pressing
or
. Selecting No alarm means
that the phone will not ring the alarm.
This option allows you to view the current month as
well as the past or future month in calendar format. In
this option, the current date is automatically highlighted
on the calendar. Days with scheduled events are
underlined.
6. Press
to save your event.
Note: You can quickly access this menu by pressing
in Standby mode.
Viewing an Event
The first event of the current day is displayed when you
select the Today menu option. Press
or
to select
the event you want to view.
To scroll through the event details, press
Menu 4-2
or
While viewing an event, the following options are
available when you press
Add new: allows you to add a new event.
Edit: allows you to edit the current event.
Erase: allows you to erase the current event.
Erase all: allows you to erase all of the events.
Scrolling through the Calendar
• You can move right or left one day by pressing
• You can move up or down one week by pressing
or
or
On the calendar, the following options are available
when you press
View: allows you to view the scheduled events of the
selected day.
Add new: allows you to add a new event on the
selected day.
Creating a New Event
1. Select a day from the calendar, referring to “Scrolling
through the Calendar” above and press
2. Schedule a new event, following from step 1 on page
66.
68
69
Planner
Planner
Viewing an Event
Viewing a Task Item
Days with scheduled events are indicated by a underline
on the calendar when you access the Scheduler menu.
Select one of them, and press
. The first event of
the day is displayed.
The first task is displayed with the deadline and the
associated priority (! for High or - for Low) when you
select the Task list menu.
If necessary, when an event is displayed, press
to
access the options. For further details on the options,
refer to “Today” on page 66.
Task list
Menu 4-3
Scroll to the task you want to view by pressing
or
While viewing a task, the following options available
when you press
Add new: allows you to add a new task.
Edit: allows you to edit the current task.
This feature allows you to enter up a list of tasks to be
done and assign both a priority and a deadline to each
task.
Erase: allows you to erase the current task.
Creating a Task Item
Memo pad
1. Enter the first task.
You can enter up to 32 characters. For further details
on how to enter characters, see page 39.
2. Press
3. Enter your deadline using the numeric keys, and press
You can move to each input field using
and
. You must enter the hour in a 12-hour format.
Press
for A (AM) or press
for P (PM).
70
Menu 4-4
This menu allows you to write down memos about
anything you need to remember.
Writing a New Memo
to confirm your input.
4. Select high or low priority using
press
to store the task.
Erase all: allows you to erase all of the tasks.
or
1. Enter the memo.
For further details on how to enter characters, see
page 33.
2. Press
to store the memo.
and then
71
Planner
Planner
Viewing a Memo
The list of your memos displays when you access the
Memo pad menu.
While viewing the memo list, press
following options:
to use the
3. Enter the required time for the alarm to ring using the
numeric keys.
You can move to each input field using
and
. You must enter the hour in a 12-hour format.
Press
for A (AM) or
for P (PM).
4. Press
Add new: allows you to add a new memo.
Erase: allows you to erase the selected memo.
to save the setting.
To stop the alarm when it rings, press any key.
Erase all: allows you to erase all of the memos.
To view details, press the Navigation keys to scroll to a
memo and press
. You can use the options above by
pressing
Alarm
Menu 4-5
This option allows you to set an alarm to ring at a
specific time or release it.
To set an alarm:
1. Select the alarm frequency option by pressing
or
and press
• Once: the alarm rings only once and is then
deactivated.
• Daily: the alarm rings every day at the same time.
Calculator
Menu 4-6
Using this feature, you can use the phone as a
calculator. The calculator provides the basic arithmetic
functions; addition, subtraction, multiplication and
division.
Note: You can quickly access this menu by pressing
in Standby mode.
1. Enter the first number using the numeric keys.
2. Set the operation for your calculation by pressing the
Navigation keys until the required arithmetic symbol
appears: + (add), - (subtract), x (multiply), / (divide).
3. Enter the second number.
4. To get the result, press
5. Repeat steps 1 to 4 as many times as required.
Each time you change the operator, the previous
calculation is performed and the result is displayed as
the top number on the display.
72
73
Planner
Planner
Notes:
• To erase any mistakes or clear the display, press
• Use
to enter a decimal point and
to change
the sign of a number to a negative (-).
2. Enter the time and date that you want to count down
from using the numeric keys.
You can move to each input field using
and
. You must enter the hour in a 12-hour format.
Press
World time
Menu 4-7
Select the city corresponding to your time zone by
pressing
or
one or more times. The local time
and date display.
Count down
for P (PM).
Note: You can enter a year between 1980 and 2099.
3. Press
You can use this menu option to find out what time it is
in another part of the world.
for A (AM) or press
to save the timer.
Viewing a Count Down Timer
The first Count down timer is displayed when you select
the Count down menu.
Scroll to the timer you want to view by pressing
or
Menu 4-8
This menu help you know how much time it takes you to
do something, or how many months, days, hours and
minutes until a specific day arrives. You can create up to
20 Count down timers using this menu.
Creating a Count Down Timer
While viewing a count down timer, the following options
are available when you press
Add new: allows you to create a new timer.
Edit: allows you to edit the current timer.
Erase: allows you to delete the current timer.
Erase all: allows you to delete all of the timers.
1. Enter a name for your new Count down timer and
press
For further details about entering text, see page 39.
74
75
Planner
Sounds
Set time
Menu 4-9
This option allows you to set the current time and date.
To set the time and date:
1. Enter the current time and date using the numeric
keys.
The month, day, hour and minute must be entered
with 2 digits. The year requires all four digits. You
must enter the hour in a 12-hour format. Press
for A (AM) or
for P (PM).
2. When you finish entering the time and date, press
to save it.
If you enter a wrong time, the phone displays “Invalid
time” and prompts you to enter again.
You can use the Sounds menu to customize various
sound settings, such as the:
• Ringer volume, type and tone.
• Key beep and voice volume.
• Alert sounds and a ringer for the roaming calls.
• Ringer which sounds when the phone is switched on
or off.
Ringer volume
Menu 5-1
This menu option allows you to adjust the ringer volume
for the following items:
Calls: allows you to adjust the ringer volume for
incoming voice calls.
Messages: allows you to adjust the ringer volume for
incoming messages.
Alarm/Schedule: allows you to adjust the ringer
volume for alarm settings and schedule alarms.
For each items, you can select one of the following
settings:
Level 1~5: you can adjust the volume level. The more
bars you see, the louder the ringer.
Vibrate: the phone switches to Vibration mode. An
incoming call vibrates the phone.
1-beep: the phone sounds a beep.
Silent: the phone does not sound the ringer.
76
High+Vib: the phone rings in the highest volume level
and then vibrates.
77
Sounds
Ringer type
Sounds
Menu 5-2
Note: You can quickly access this menu by pressing
in Standby mode.
This option allows you to set unique ringers for the
following items:
Voice calls: allows you to set a unique ringer for
incoming voice calls.
Messages: allows you to have a distinctive ringer for
incoming messages.
Alerts
Menu 5-4
Your phone gives audible alerts (beeps) at a specified
time to inform you that certain things have happened.
The alerts only occur in your earpiece so the other party
does not hear them.
The available alerts are:
Minute beep: When this menu option is set to On, the
phone sounds an alert 10 seconds before each elapsed
minute to remind you of the length of the current call.
Alarm/Schedule: allows you to have a distinctive
ringer for alarm settings and schedule alarms.
Service: When this menu option is set to On, the
phone sounds an alert when you exit service area or
when you return to a service area.
For each items, you can select a unique ringer type from
35 different tones or melodies. After you change it, it
sounds for a few seconds.
Connect: When this menu option is set to On, the
phone sounds a connect tone when your call is
connected to the system.
Key beep
Disconnect: When this menu option is set to On, the
phone sounds a disconnect tone when a call is
disconnected.
Menu 5-3
This option allows you to adjust the tone volume that
the keypad generates each time you press a key.
Fade: When this menu option set is to On, the phone
sounds an alert when a dropped call occurs during
conversation in response to a signal fade.
The graphic shows the volume level; the more bars you
see, the louder the sound. No bar means that the key
beep is turned off.
Roam: When this menu option is set to On, the phone
sounds an alert when your phone starts roaming.
78
79
Sounds
Voice volume
Sounds
Menu 5-5
Power on/off
Menu 5-8
This option enables you to adjust the voice volume of
the earpiece.
This option allows you to turn on or off the sound that
the phone generates when it is switched on and off.
The graphic shows the volume level; the more bars you
see, the louder the sound.
Choose On to turn the sound on or Off to turn it off.
Roam ringer
Menu 5-6
You can set the phone to use a distinctive ring for
incoming roaming calls.
Choose On to use a distinctive ringer or Off to use a
normal ringer.
Tone length
Menu 5-7
The tone length setting enables you to select Long or
Short DTMF (Dual-Tone Multi-Frequency) tones. When
you use a teleservice, such as accessing your bank
account, and press the keys to enter numbers into the
teleservice, you are sending DTMF tones. The system
used by the bank or other service determines if you need
short or long DTMF tones. If the service is digital, as
most are, short DTMF will almost always work.
80
81
Display
Display
The Display feature enables you to:
• Change the display for Menu mode.
• Create your own greeting, and select an animation to
be displayed in Standby mode or when the phone is
powered on or off.
• Set the length of time for the backlight.
• Adjust the brightness of the LCD screen.
Menu style
Menu 6-1
Backlight
Menu 6-3
You have several options for setting how the LCD
backlight operates. Remember that backlight use drains
your battery faster.
The following options are available:
8/30 seconds: the backlight comes on when you press
a key or receive a call and switches off 8/30 seconds
after the last key is pressed.
Always on: the backlight is always on.
This option allows you to set the style of showing the
main menu list. Horizontal and Vertical are available.
Wallpaper
Menu 6-2
You can select the background image (wallpaper) to be
displayed in Standby mode. Select an image to be
displayed by pressing the Navigation keys and press
Banner
Menu 6-4
This option allows you to set a banner message to be
displayed at the bottom of the display in Standby mode.
To change the banner:
1. If necessary, press
repeatedly to delete each
letter of the old greeting. Press are hold
to
remove the whole greeting.
2. Enter your banner message of up to 12 characters by
using the alphanumeric keys.
For further information on how to enter characters,
refer to page 39.
3. When you finish entering the message, press
save the new banner.
82
to
83
Display
Setup
Contrast
Menu 6-5
This option allows you to see the LCD screen better in
different lighting conditions. Scroll through the contrast
settings to make the screen darker or brighter.
Many different features of your phone can be
customized to suit your preferences.
Auto CSP (Carrier Selection Code)
Menu 7-1
This menu allows you to automatically add the CSP
(Carrier Selection Code) of your long-distance call
service to your number when making a call.
On/Off (Menu 7-1-1)
This menu allows you to enable or disable the Auto CSP
feature.
Select Enable to activate this feature or Disable to
deactivate it.
Code setting (Menu 7-1-2)
This menu allows you to set the 2 digit carrier code to
be added to the phone number.
Enter the carrier code you want and press
Notes:
• Before setting the carrier code, you should enable the
On/Off menu first.
• The code is added only when the phone number has
6, 7, 10, or 11 digits and starts with 0XX, for example,
012 or 015.
84
85
Setup
Auto key lock
Setup
Menu 7-2
This menu allows you to lock the keypad automatically
after predefined time.
Select Off to unlock the phone.
Auto answer
Menu 7-5
With this menu option activated, your phone will
automatically retry the call up to 10 times when a
connection fails.
To activate this feature, select how often the phone will
automatically retry the call.
Menu 7-3
With this menu option activated, the phone
automatically answers calls after predefined time. This
option is useful while driving, for instance.
To activate this feature, select how long your phone
waits before answering an incoming call.
When this menu is option set to off, the phone does not
answer an incoming call. If you do not answer the call, it
is stored in the Missed call log (see page 53).
Call answer
Auto retry
Menu 7-4
This menu option allows you to select how to answer an
incoming call.
Select off to deactivate this feature.
Auto hyphen
Menu 7-6
With this menu option set to Yes, your phone
automatically hyphenates the digits when you dial a
number. This hyphenates numbers as follows: 000-0000000. Digits following a pause are not hyphenated.
Language
Menu 7-7
You can change the language of voice prompts, menus
and key-input.
Select the language from English, Spanish, and
Portuguese.
The following options are available:
Any key: the phone answers when you press any key
except
SEND key: the phone answers only when you press
86
87
Setup
Select NAM
Setup
Menu 7-8
NAM stands for numerical assignment module,
essentially your telephone number. Your Samsung phone
can store two NAMs. This means you can have two
phone numbers on your phone, and you can quickly and
easily switch your service back and forth between the
two numbers.
Select NAM 1 or NAM 2. If you change the NAM, the
phone will reboot and acquire service using the new
NAM setting.
Pref B only: this works just like the “Pref A only”
setting except you will only be able to roam in the “B”
network or system.
Home only: with this setting, you cannot roam. If your
home system is not available then your call will not be
connected and the No Service icon ( ) is displayed. In
some service areas an operator may come on line asking
you how you would like to pay for the call.
Standard: this option allows you to provide the best
system automatically.
Version
Set system
Menu 7-0
Menu 7-9
The system selection feature of your phone enables you
to choose how your phone will roam. Roaming is a
feature which is only relevant in areas where there are
usually at least two cellular service providers which are
referred to as “A” and “B” and have valid roaming
agreements. Your service provider will provide you
information about this service or the best roaming
methods for you.
This option allows you to view the software and the
hardware version of your phone. This feature is helpful
if you need to call the customer care.
The following options are available:
Pref A only: in a wireless service area, there are
usually two service providers which are referred to as A
and B. Your service provider will provide you information
about this when you set up service. With this setting,
you will only be able to roam in the “A” network or
system.
88
89
Security
Security
Your phone provides many security options, including a
user-programmable lock code and call restriction
features.
To access the security menu, you need to enter a fourdigit lock code. The lock code is preset to “0000” at the
factory.
Lock phone
Menu 8-1
In Lock mode, you cannot dial number, except for making
an emergency call, or accessing menu options. You can
receive incoming calls and messages, even though the
phone is locked.
The following options are available:
Unlocked: the phone remains unlocked.
On power-up: the phone locks automatically the next
time you turn the phone on.
Lock now: the phone locks immediately.
To place an emergency call, enter the number and then
press
. The phone recognizes standard emergency
number, and three emergency numbers saved via the
Emergency # menu option (Menu 8-4); see page 99.
To unlock the phone, press
90
and enter the lock code.
Change lock
Menu 8-2
You can change your current lock code to a new one.
The lock code is preset to “0000” at the factory.
Enter a new four-digit lock code, and your phone
prompts you to enter the code again. Re-enter the lock
code. The phone saves the new code and automatically
returns to Standby mode.
Note: Your phone does not allow viewing of the lock
code for security reasons, so be sure to write the
lock code down or memorize it if you have
changed.
Restriction
Menu 8-3
This feature allows you to restrict all your outgoing
calls. You cannot make any call, except for emergency
calls (see below).
Select Yes to use the call restriction feature or No to
release the feature.
Emergency #
Menu 8-4
Your phone provides the option of storing emergency
numbers. These numbers can be manually dialed at any
time, even though your phone is locked or all outgoing
calls are restricted. You can store up to three emergency
numbers.
91
Security
Security
To store an emergency number:
1. Select a location using a numeric key,
followed by
Erase contacts
or
This menu allows you to erase all the numbers in the
Contacts and in the voice-dial list.
2. Enter the required number. Each number can be up to
32 digits long.
If there is a number already stored, delete the number
using
3. Press
to save the number.
To make an emergency call in Lock mode, simply enter a
emergency number, then press
Send PIN
Menu 8-6
Menu 8-5
Note: Your service provider must enable this feature
and assign you a PIN (Personal Identification
Number) in order for this feature to work.
This feature prevents your phone from being used by
unauthorized people. Contact your service provider for
complete information on this feature.
When a confirming message displays, press
clear the memory.
to
The phone restores the default settings, and then
returns to Standby mode.
Reset phone
Menu 8-7
Resetting the phone erases all of your saved options
and information and returns them to the factory default
settings, except for the Contacts entries and SMS
messages.
When a confirming message displays, press
reset the phone.
to
The phone turns itself off and back on, restores the
default settings, and then returns to Standby mode.
The following options are available:
Never: the option is not activated.
Prompt: each time you make a call, you are asked to
enter your PIN.
92
93
Health and Safety Information
Health and Safety
Information
Precautions When Using the Batteries
Your phone is powered by a rechargeable Li-ion
standard battery.
• Never use any charger or battery that is damaged in
any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base station,
it uses less power; talk and standby time are greatly
affected by the signal strength on the cellular
network and the parameters set by the network
operator.
• Battery charging time depends on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time, including talk time and
standby time, is noticeably shorter than normal, it is
time to buy a new battery.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and life-time of the battery.
Always try to keep the battery at room temperature.
A phone with a hot or cold battery may temporarily
not work, even when the battery is fully charged. Liion batteries are particularly affected by
temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental short
circuiting can occur when a metallic object (coin, clip
or pen) causes a direct connection between the + and
- terminals of the battery (metal strips on the back of
the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the
terminals may damage the battery or the object
causing the short-circuit.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
• If left unused, a fully charged battery will discharge
itself over time.
• Use only Samsung-approved batteries and recharge
your battery only with Samsung-approved chargers.
When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to
a charger for more than a week, since overcharging
may shorten its life.
94
95
Health and Safety Information
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice - almost anywhere, anytime. But
an important responsibility accompanies the benefits of
wireless phones, on that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features
such as speed dial and redial. If available, these
features help you to place your call without taking
your attention off the road.
2. When available, use a hands free device. If possible,
add an additional layer of convenience and safety to
your wireless phone with one of the many hands free
accessories available today.
3. Position your wireless phone within easy reach. Be
able to access your wireless phone without removing
your eyes from the road. If you get an incoming call at
an inconvenient time, if possible, let your voice mail
answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic
or hazardous weather conditions. Rain, sleet, snow,
ice, and even heavy traffic can be hazardous.
96
Health and Safety Information
5. Do not take notes or look up phone numbers while
driving. Jotting down a “to do” list or flipping through
your address book takes attention away from your
primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be
stationary. If you need to make a call while moving,
dial only a few numbers, check the road and your
mirrors, then continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Make people you are talking
with aware you are driving and suspend
conversations that have the potential to divert your
attention from the road.
8. Use your wireless phone to call for help. Dial
emergency number in the case of fire, traffic accident
or medical emergencies. Remember, it is a free call
on your wireless phone!
9. Use your wireless phone to help others in
emergencies. If you see an auto accident, crime in
progress or other serious emergency where lives are
in danger, call 9-1-1 or other local emergency number,
as you would want others to do for you.
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you
see a broken-down vehicle posing no serious hazard,
a broken traffic signal, a minor traffic accident
where no one appears injured, or a vehicle you know
to be stolen, call roadside assistance or other
special non-emergency wireless number.
97
Health and Safety Information
Operating Environment
Remember to follow any special regulations in force in
any area and always switch off your phone whenever it
is forbidden to use it, or when it may cause interference
or danger.
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation of
the equipment and for the safety of personnel, it is
recommended that the equipment should only be used in
the normal operating position (held to your ear with the
antenna pointing over your shoulder).
Health and Safety Information
Persons with pacemakers:
• Should always keep the phone more than 15 cm (6
inches) from their pacemaker when the phone is
switched on;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the pacemaker to
minimize potential interference.
If you have any reason to suspect that interference is
taking place, switch off your phone immediately.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
Other Medical Devices
Electronic Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are consistent with the independent research
and recommendations of Wireless Technology Research.
98
If you use any other personal medical devices, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information. Switch off your phone in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to
external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
99
Health and Safety Information
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Switch off your phone in any facility where posted
notices require you to do so.
Potentially Explosive Atmospheres
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs and
instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants or where blasting operations are
in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include below deck
on boats, chemical transfer or storage facilities, vehicles
using liquefied petroleum gas (such as propane or
butane), areas where the air contains chemicals or
particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
100
Health and Safety Information
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well as
user-programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must
be switched on and in a service area with adequate
signal strength. Emergency calls may not be possible on
all wireless phone networks or when certain network
services and/or phone features are in use. Check with
local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example),
you may first need to deactivate those features before
you can make an emergency call. Consult this document
and your local cellular service provider.
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut
off the call until given permission to do so
101
Health and Safety Information
Health and Safety Information
Other Important Safety Information
Care and Maintenance
• Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years.
• Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
• Keep the phone and all its parts and accessories out
of the reach of small children’s.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as the
phone, its parts or accessories.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode electronic
circuits.
• For vehicles equipped with an air bag, remember that
an air bag inflates with great force. Do not place
objects, including both installed or portable wireless
equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is
improperly installed and the air bag inflates, serious
injury could result.
• Do not use or store the phone in dusty, dirty areas, as
its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
• Switch off your phone before boarding an aircraft. The
use of wireless phones in aircraft may be dangerous
to the operation of the aircraft, and is illegal.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating temperature,
moisture can form inside the phone, which may
damage the phone’s electronic circuit boards.
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with a
soft cloth slightly dampened in a mild soap-andwater solution.
102
103
Health and Safety Information
Glossary
• Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
• Do not touch the terminals on the battery or charger
with wet hands. Doing so may give you an electronic
shock or cause explosion. Touching the plug of the
charger with wet hands may give you an electronic
shock or cause a fire.
• Use only the supplied or an approved replacement
antenna. Unauthorized antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger or any accessory is not
working properly, take it to your nearest qualified
service facility. The personnel there will assist you,
and if necessary, arrange for service.
Airtime - Actual time spent talking on the wireless
phone. Most carriers bill customers based on how many
minutes of airtime they use each month.
Antenna - A device for transmitting or receiving
signals. The size and shape of antennas is determined,
in part, by the frequency of the signal they receive.
Wireless phones and the base station must have
antennas.
Base Station - The fixed radio transmitter/receiver that
maintains communications with mobile radio telephones
within a given area. (Typically called a cell or cell site)
CDMA - (Code Division Multiple Access) A spreadspectrum approach to digital transmission. With CDMA,
each conversion is digitized and then tagged with a
code. The mobile phone deciphers only a particular code
to pick the right conversation off the air. The transmitted
signal is just above noise level across the available
bandwidth.
Channel - Communications signals transmit along paths
called channels.
Codec - Compression & Decompression.
Deactivation - The process of rendering a wireless
phone inactive.
DTMF - (Dual-Tone Multi-Frequency ) You send DTMF
signals when you enter numbers by pressing the digit
keys.
104
105
Glossary
Glossary
EVRC - (Enhanced Variable Rate Codec) EVRC is a new
global standard for compressing and decompressing
voice signals. EVRC uses a lower bit rate (the number of
bits sent per second) than existing CDMA vocoders,
while providing significant improvements in voice
quality. This technology enables your phone to provide
superb voice quality while benefiting from the ability to
process more cellular voice calls using less bandwidth
than the voice codecs in CDMA networks today.
Roaming - The ability to use a wireless phone to make
and receive calls in places outside of the home service
area.
Frequency - A measure based on time, as one or more
waves per second, in an electrical or light wave
information signal. A signal’s frequency is stated in
cycles-per-second or Hertz (Hz).
Talk Time - The length of time a person can talk on a
portable or transportable wireless phone without
recharging the battery.
Hands-Free - A feature that permits a driver to use a
wireless phone without lifting or holding the handset an important safety feature for automobiles, tractors
and most other motorized vehicles.
LCD - (Liquid Crystal Display) Commonly used to refer to
the screen display on the wireless phone.
Service Charge - The amount paid each month to
receive wireless service.
Standby Time - The amount of time a fully charged
wireless portable or transportable phone can be on and
idle without being in use. (See Talk Time)
Vocoder - Voice Coder. A device used to convert speech
into digital signals.
Wireless - Radio-based Systems that allow
transmission of telephone or data signals through the air
without a physical connection, such as a metal wire
(copper) or fiber optic cable.
LED - (Light Emitting Diode) Commonly used to refer to
a small light on the wireless phone or on the Desktop
Charger. The LED lights on the phone to indicate an
incoming call. The lights on the charger indicate that
battery charging is taking place.
Prepend - The addition of a prefix, such as an area
code, to a phone number.
RF - Radio Frequency
106
107
Index
s when
l update
il
The ind al is fixed.
nu
the ma
Accessories • 9
Air time (1-5) • 54
Alarm (4-8) • 74
Alerts (5-4) • 77
Auto hyphen (6-7) • 82
Auto answer (9-2) • 90
Auto retry (9-1) • 90
Backlight (6-1) • 15, 79
Banner (6-2) • 80
Battery
charging • 19
installing • 17
low battery indicator • 20
removing • 18
precautions • 115
Calculator (4-7) • 73
Call
answering • 33
dialed • 52
emergency •98, 122
ending • 24
forwarding • 38
from contacts • 55
incoming (1-2) • 53
making • 24
missed • 36, 53
outgoing (1-1) • 52
redialing last • 25
restrict (0-2) • 98
three way • 37
waiting • 38
Call answer (9-3) • 91
Caller ID • 35
Care • 124
Characters, entering • 39
Charging batteries • 19
Clearing memory (0-6) • 100
108
Connect tone • 77
Correcting number • 24
Contrast • 83
Cover, replacing • 16
Countdown (4-5) • 71
Data/fax
alert • 77
receiving/sending •94
menu (9-7) • 93
Dialing
pause • 28
prepend • 26
speed • 27
voice • 31, 84
Disconnect tone • 77
Display
backlight • 15, 79
contrast • 83
icons • 13
language • 81
layout• 13
menu (6) • 74
DTMF tone
length (9-4) • 91
sending • 34
Emergency number (0-4) • 98
Erasing logs (1-4) • 53
Finding
entry (2-3) • 59
name (2-1) • 55
Games (8) • 89
Index
Icons • 13
Inbox (OK-3) • 106
In-call options • 34
Incoming calls (1-2) • 53
Incoming data/fax (9-7) • 93
Installing battery • 17
Internet • 61
setup • 110
voice • 105
web • 109
writing new • 103
Minute beep • 77
Missed calls (1-3) • 53
Modes
phone • 22
text input • 39
Mute
key tones • 34
microphone • 34
Jump to date (4-3) • 69
Key beep (5-3) • 76
Keys
description • 11
location • 10
Language (6-5) • 81
Last number redialing • 25
Letters, entering • 39
Listening
voicemail • 105
Lock code (0-3) • 98
Lock mode (0-1) • 97
Low battery indicator • 20
Maintenance • 124
Memory, clearing (0-6) • 100
Menu
list • 48
scrolling • 46
shortcuts • 47
style (6-9) • 83
Messages
filed • 108
incoming • 106
outgoing • 107
ringer • 111
Names
entering • 39
searching/dialing • 55
NAM setting (9-5) • 92
Network, setting (9-8) • 95
Number
correcting • 24
my phone (6-4)• 81
searching/dialing • 59
storing in the
contacts • 57
Outbox (OK-4) • 107
Outgoing calls (1-1) • 52
Phone
layout • 10
locking • 97
my number (6-4) • 81
Contacts (2) • 55
PIN, sending (0-5) • 99
Power on/off sound (5-7) • 78
Power save mode • 23
Prepend dialing • 26
109
Index
Speed dial
Store a new
number into
Phone number + OK + OK +
+ MENU + Name + OK + +
MENU + Entry + OK + +
MENU + Secret + OK + +
MENU + Category + OK + +
MENU + Relation + OK + +
MENU + Ringer + OK + OK
INTERNAL PHONE BOOK
SCH-N345 Quick Reference Card
(during a conversation)
▲ / ▼ on the left side
(in Standby mode)
▲ / ▼ on the left side
Phone number +
BASIC OPERATION
Make a call
End a call
Receive a call
Adjust ringer
volume for
calls
Adjust speaker
volume
twice
Hold
Redial the last call
Switch to Silent
mode
111
110
One Touch (001~009): Hold
down the third digit.
Two-Touch (010~099): Press
the second digit briefly, then
hold down the third digit.
Three-Touch (100~500): Press
the first and the second digit
briefly, then hold down the
third.
Talk mode • 22
Task list (4-4) • 70
Text, entering • 39
Today (4-1) • 66
Tone length (9-4) • 91
Transmitted message • 103
T9 text mode • 39
Hold
or the button on
the ear-microphone.
Initiate voice
dialing
Unpacking • 9
+ Location ( 0r / ) + OK
+ Name ( 0r / ) + OK
Voice mail (OK-2) • 105
Voice volume (5-5) • 78
Volume, adjusting
voice • 32, 78
ring • 32, 75
key • 32, 76
Received Messages • 106
Redialing
automatic • 90
last call •25
Removing battery • 18
Replacing covers • 16
Reset phone (0-7) • 100
Restrict (0-2) • 98
Ringer
type • 76
volume • 75
Roam ringer (5-6) • 78
Scan memories
• Location
• Name
Safety
batteries • 115
information • 112
precautions • 7
Scheduler (4) • 66
Searching/dialing
entry • 59
name • 55
Security (0) • 97
Selecting system (9-6) • 92
Service alert • 77
Set time (6-6) • 82
Setup (9) • 90
Sounds (5) • 75
Speed dialing • 27
Standby mode • 22
Switching on/off
microphone • 34
phone • 21
Web (3) • 61
Whisper mode (9-9) • 95
World time (4-6) • 72
Writing new message • 103
112
4 : Planner
3 : Messages
2 : Contacts
1:
2:
3:
4:
5:
1:
2:
3:
4:
5:
6:
7:
1:
2:
3:
4:
5:
6:
7:
1:
2:
3:
4:
5:
6:
7:
8:
9:
Outgoing
Incoming
Missed
Erase history
Air time
Find by name
Add new entry
Find by entry
Find by group
Add e-mail
My phone #
Memory
New messages
Voice
Inbox
Sent
Draft
Erase msg
Msg setting
Today
Scheduler
Task list
Memo pad
Alarm
Calculator
World time
Count down
Set time
Main Menu (To access, press
1 : Calls
8 : Security
7 : Setup
6 : Display
5 : Sounds
MENU TREE
1:
2:
3:
4:
5:
6:
7:
8:
1:
2:
3:
4:
5:
1:
2:
3:
4:
5:
6:
7:
8:
9:
0:
1:
2:
3:
4:
5:
6:
7:
Ringer volume
Ringer type
Key beep
Alerts
Voice volume
Roam ringer
Tone length
Power on/off
Menu style
Wallpaper
Backlight
Banner
Contrast
Auto CSP
Auto key lock
Auto answer
Call answer
Auto retry
Auto hyphen
Language
Select NAM
Set system
Version
Lock phone
Change lock
Restriction
Emergency #
Send PIN
Erase contacts
Reset phone
Telefone Celular Modelo SCH-N345
Nº série eletrônico
DADOS DO COMPRADOR
Nome:
Endereço:
ESPAÇO A SER PREENCHIDO PELO REVENDEDOR
Revendedor:
Cidade:
Carimbo do Revendedor:
IMPORTANTE: A garantia somente será válida se este
Certificado de Garantia for completamente preenchido no
ato da compra pelo revendedor e apresentado junto com a
Nota Fiscal original de venda deste telefone celular.
ELECTRONICS
I. ABRANGÊNCIA E PRAZO DE GARANTIA
SAMSUNG ELETRÔNICA DA AMAZÔNIA LTDA. (SAMSUNG), garante
os telefones celulares e acessórios (exceto baterias) contra defeitos de material
e mão-de-obra, em condições normais de uso e manutenção, pelo prazo de
3 (três) meses legal, mais 9 (nove) meses de garantia adicional, num total de
1 (um) ano a partir da data de aquisição do aparelho, identificada pela Nota
Fiscal do produto e pelo preenchimento deste certificado. No caso de telefones
ou acessórios que sejam instalados em veículos, o prazo será contado a partir
da data de aquisição dos mesmos.
A SAMSUNG sem nenhum custo para o usuário, consertará ou substituirá o
telefone celular ou acessórios, durante o prazo de garantia, desde que este seja
enviado a uma assistência técnica SAMSUNG CELULAR, de acordo com os
termos desta garantia, acompanhado deste certificado de garantia e da
respectiva nota fiscal emitida no Brasil. O conserto, a critério da SAMSUNG,
poderá incluir a substituição de peças ou placas, por novas ou
recondicionadas equivalentes. Os telefones celulares, acessórios, baterias,
peças ou placas substituídas serão garantidas pelo restante do prazo original.
Todos os acessórios, baterias, peças, placas, equipamentos de telefones
celulares e acessórios substituídos se tornarão propriedade da SAMSUNG.
II. CONDIÇÕES DE GARANTIA
A SAMSUNG não assume qualquer obrigação ou responsabilidade por
acréscimos ou modificações desta garantia, salvo se efetuadas por escrito em
caráter oficial. Exceto se houver contrato escrito separado entre a
SAMSUNG e o usuário, a SAMSUNG não garante a instalação do
equipamento ou acessório. A SAMSUNG não será de forma alguma
responsável por qualquer acessório que não seja de seu fornecimento, que
anexado ou usado com seus telefones celulares, ou pelo funcionamento de
seus telefones ou acessórios com quaisquer outros acessórios que não os
fornecidos pela SAMSUNG. Tais acessórios estão expressamente excluídos
da garantia, e a SAMSUNG não será responsável por quaisquer danos
causados ao produto, resultantes de tais fatos.
III. ITENS EXCLUÍDOS DESTA GARANTIA
A garantia não cobre:
(a) Defeitos ou danos resultantes do uso anormal pelo cliente do produto,
como superfícies plásticas e outras peças expostas externamente arranhadas, trincadas ou quebradas, bem como derramamento de alimentos ou
líquidos de qualquer natureza;
GARANTIA LIMITADA DA SAMSUNG PARA TELEFONES CELULARES
ADQUIRIDOS NAS REVENDAS AUTORIZADAS NO BRASIL
GARANTIA LIMITADA DA SAMSUNG PARA
TELEFONES CELULARES ADQUIRIDOS NAS
REVENDAS AUTORIZADAS NO BRASIL
(b) Defeitos ou danos decorrentes de testes, instalação, alteração, modificação
de qualquer espécie em nossos produtos, bem como o conserto realizado por
outras oficinas que não sejam SAMSUNG CELULAR; (c) Quebra ou danos
que não foram constatados no ato da aquisição (gabinete, antena, acessórios,
etc) ; (d) Produtos que tenham tido o número de série removido, adulterado
ou tornado ilegível; (e) Defeitos e danos decorrentes a utilização de
componentes e acessórios não originais SAMSUNG (gabinete, antena,
display, peças em geral, etc.); (f) Defeitos e danos causados por agentes
naturais (enchente, maresia, descarga elétrica e outros).
IV. BATERIA
ASAMSUNG garante pelo prazo de 3 (três) meses legal e mais 3 (três) meses
adicionais, totalizando 6 (seis) meses de garantia a partir da data de
aquisição da bateria. Esta garantia não se aplica, qualquer que seja o tipo de
bateria, se: (a) As baterias forem recarregadas por carregadores que não
sejam originais da SAMSUNG; (b) Qualquer dos selos da bateria tiver sido
violado ou contiver evidências de adulteração; (c) As baterias forem
utilizadas em equipamentos ou serviços que não sejam os equipamentos de
telefonia celular para os quais tenham sido especificados.
V. CONSIDERAÇÕES GERAIS
O único recurso oferecido é o conserto, substituição de peça ou produto, à
opção da SAMSUNG. Esta garantia substitui todas as outras garantias
expressas ou tácitas, incluindo sem limitação, garantias tácitas de
comercialidade e adequação a um fim específico. A SAMSUNG não oferece
nenhuma garantia quanto à cobertura, disponibilidade ou nível dos serviços
oferecidos pela companhia telefônica, em hipótese alguma a SAMSUNG
será responsável por indenização superior ao preço da compra do telefone
celular, por qualquer perda de uso, perda de tempo, inconveniência,
prejuízo comercial, perda de lucros ou economias, por outros danos diretos
ou indiretos, decorrentes do uso ou impossibilidade de uso do produto.
ATENÇÃO
Não recarregue as baterias SAMSUNG em carregadores que não
sejam os originais. O uso destes carregadores pode ocasionar
graves acidentes.
ELECTRONICS
Cidade:
CEP:
Estado:
Telefone:
Nº da Nota Fiscal:
Data da Compra:
Estado:
SERVIÇO CELULAR
☎
SAC
0800 124 421
SUA LINHA DIRETA COM A SAMSUNG
Este produto está adequado para
uso no ano 2000 e subsequentes.
Licensed by QUALCOMM Incorporated under one or more
of the following Patents.
U.S Patent No. 4,901,307 5,056,109 5,099,204
5,101,501 5,103,459 5,107,225
5,109,390

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Modify Date                     : 2004:05:11 10:43:17-03:00
Create Date                     : 2004:05:06 00:37:10Z
Page Count                      : 59
Has XFA                         : No
About                           : uuid:46f9e73d-6e39-47da-8ca7-f2d1085051ac
Producer                        : Acrobat Distiller 5.0.2 for Macintosh
Creation Date                   : 2004:05:06 00:37:10Z
Mod Date                        : 2004:05:11 10:43:17-03:00
Author                          : pdidotcom
Metadata Date                   : 2004:05:11 10:43:17-03:00
Creator Tool                    : QuarkXPress.: AdobePS 8.7.3 (301)
Document ID                     : uuid:e6256f7d-12bb-4e03-9b41-848bb130614d
Format                          : application/pdf
Creator                         : pdidotcom
Title                           : 00-N345-Cover

EXIF Metadata provided by EXIF.tools