Samsung Electronics Co SGHA401 Single-Band PCS GSM/ EDGE/ WCDMA Phone with BT User Manual
Samsung Electronics Co Ltd Single-Band PCS GSM/ EDGE/ WCDMA Phone with BT Users Manual
Users Manual
* Depending on the software installed or your service provider or country, some of the descriptions in
this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear different from the illustrations
in this guide.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-XXXXXA
English (AUS). 10/2006. Rev. 1.0
SGH-A401
User’s Guide
Use road safety at all times
Do not use a hand-held phone while driving. Park the
vehicle first.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them in
an aircraft is both illegal and dangerous.
Switch off the phone near all medical equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Important safety precautions
1
Be aware of special regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency calls
Key in the emergency number for your present
location, then press .
Keep your phone away from small children
Keep the phone and all its parts, including
accessories, out of the reach of small children.
Accessories and batteries
Use only Samsung-approved batteries and
accessories, such as headsets and PC data cables.
Use of any unauthorised accessories could damage
you or your phone and may be dangerous.
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see "Health
and safety information" on page 112.
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
At very high volumes, prolonged listening
to a headset can damage your hearing.
2
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To
quickly learn the basics for your phone, please refer
to “Get started” and “Step outside the phone.”
In this guide, the following instruction icons
appear:
Indicates that you need to pay careful attention
to the subsequent information regarding safety
or phone features.
Indicates that you can get more information on
the referenced page.
→
Indicates that you need to press the Navigation
keys to scroll to the specified option and then
select it.
[]
Indicates a key on the phone. For example,
[]
<>
Indicates a soft key, whose function is
displayed on the phone screen. For example,
<
Menu
>
•3G
Your phone is capable of operating
in a 3G environment, allowing
much greater data transfer speed,
video streaming, and video
conferencing.
Special
f
eatures of your phone
• Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
• Media player
Play media files on your phone.
You can enjoy high quality videos
and music.
Special features of your phone
3
• Bluetooth
Transfer media files and personal
data and connect to other devices
using free, wireless Bluetooth
technology.
•Web browser
Access the wireless web to get up-
to-the-minute information and a
wide variety of media content.
• Messenger
Have a conversation with other
people by sending and receiving
instant messages.
• Multimedia Message Service
(MMS)
Send and receive MMS messages
with a combination of text,
images, video, and audio.
•E-mail
Send and receive e-mails with
image, video, and audio
attachments.
•Java
Enjoy Java™-based embedded
games and download new games.
•Phonebook
Store home, office, or cellular
phone numbers for your contacts.
• Name card
Create name cards with your
number and profile. Whenever
introducing yourself to others, use
this convenient electronic name
card.
4
Contents
Unpack 6
Make sure you have each item
Your phone 6
Keys, features, and locations
Get started 7
First steps to operating your phone
Install and charge the phone.............................. 7
Power on or off ................................................ 9
Keys and display .............................................. 9
Access menu functions .................................... 13
Customise your phone .................................... 14
Make/Answer calls .......................................... 17
Step outside the phone 18
Begin with your camera, the media player, the web,
and other special features
Use the camera .............................................. 18
Play media files .............................................. 19
Browse the web.............................................. 20
Use Phonebook .............................................. 21
Send messages .............................................. 22
View messages .............................................. 24
Use Bluetooth ................................................ 25
Switch applications ......................................... 27
Enter text 28
ABC, T9, Number, and Symbol modes
Call functions 31
Advanced calling features
Menu functions 36
All menu options listed
Solve problems 110
Help and personal needs
Health and safety information 112
Index 121
5
1 Call log
p. 36
1 Recent contacts
2 Missed calls
3 Dialled calls
4 Received calls
5 Delete all
6 Call time
7 Data volume
8 Data call time
9 Call cost
1
p. 36
p. 37
p. 37
p. 37
p. 37
p. 38
p. 38
p. 39
p. 39
2 Phonebook
p. 39
1 Search contact
2 New contact
3 Groups
4 Speed dial list
5 My business card
6 Copy all
7 Own number
8 FDN list
9 Service number
1
10 Settings
11 Memory status
p. 40
p. 41
p. 42
p. 43
p. 43
p. 44
p. 44
p. 44
p. 45
p. 45
p. 45
3 Applications
p. 45
1 Media player
2 Alarm
3 Record audio
4 Organizer
5 Calculator
6 Converter
7 World clock
8 PocketNews
1
p. 46
p. 48
p. 49
p. 50
p. 55
p. 56
p. 56
p. 57
4 Browser
p. 57
1 BigPond Home
2 Bookmarks
3 Enter URL
4 Browser profiles
5 Clear cache
p. 58
p. 59
p. 60
p. 60
p. 60
5 My Place
p. 60
1 BigPond
2 FOXTEL
3 Search
4 Email
5 Music
6 Downloads
p. 60
p. 61
p. 61
p. 61
p. 61
p. 61
Overview of menu functions
To access Menu mode, press <
Menu
> in Idle mode.
5 My Place (continued)
7 Photos
8 Maps
9 My Account
p. 62
p. 62
p. 62
6 My files
p. 62
1 Images
2 Video
3 Sounds
4 Music
5 Games and more
6 Other files
7 Memory status
p. 63
p. 64
p. 66
p. 67
p. 68
p. 70
p. 70
7 Camera
p. 70
8 Messages
p. 77
1 Create new
2 Inbox
3 Sent box
4 Outbox
5 Drafts
p. 77
p. 81
p. 83
p. 83
p. 84
8 Messages (continued)
6 Email inbox
7 Templates
8 IM
9 Delete all
10 Settings
11 Memory status
p. 84
p. 86
p. 87
p. 87
p. 88
p. 93
9 Settings
p. 93
1 Profiles
2 Display settings
3 Time & date
4 Phone settings
5 Call settings
6 Connectivity
7 Application settings
8 Security
9 Reset settings
10 Memory status
p. 94
p. 95
p. 96
p. 97
p. 98
p. 101
p. 107
p. 108
p. 109
p. 109
1. Available only if supported
by your USIM/SIM card.
6
Your phone
Keys, features, and locations
Camera key
External display
Camera lens
Headset/
Adapter jack
Microphone
Right soft key
Contact key
Delete/Cancel key
Power on/off/Menu exit key
Confirm key
Alphanumeric keys
Left soft key
Navigation keys
(Up/Down/Left/Right)
Dial key
Earpiece
Main display
Special function keys
Volume keys
Application
switch key
Unpack
Make sure you have each item
• Phone
•Travel Adapter
•Battery
• PC Data Cable
• PC Link CD
• User’s Guide
You can obtain various
accessories from your local
Samsung dealer.
The items supplied with
your phone and the
accessories at your
Samsung dealer may
vary, depending on your
country or service
provider.
7
Get started
First steps to operating your phone
USIM/SIM card information
When you subscribe to a cellular network, you
receive a plug-in SIM (Subscriber Identity
Module) card loaded with your subscription
details, such as your PIN, and available optional
services. For 3G services, you can purchase a
USIM (Universal Subscriber Identity Module)
card.
Install and charge the phone
Remove the battery
cover.
If the phone is
already on, first turn
it off by pressing and
holding
[]
.
Insert the USIM/
SIM card.
Make sure that the
gold-coloured
contacts on the card
are face down.
Install the battery.
Get started
8
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the battery low message displays, and
• the empty battery icon blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
Reattach the
battery cover.
Plug the adapter
into a standard AC
wall outlet.
Plug the adapter into a standard AC wall
outlet.
When the phone is completely charged (the
battery icon becomes still), unplug the
adapter from the power outlet.
Remove the adapter
from the phone.
Get started
9
Power on or off Keys and display
Keys
Switch on
Do not turn on
the phone when
mobile phone
use is
prohibited.
1. Open the phone.
2. Press and hold [ ].
3. If necessary, enter the
PIN and press
<
Confirm
>.
Switch off
1. Open the phone.
2. Press and hold [ ].
Perform the function indicated on
the bottom line of the display.
Access the contact list.
Open the application switch
window to access other
applications without exiting the
current application.
In Idle mode, access your favourite
menus directly.
p. 97
In Menu mode, scroll through
menu options.
Get started
10
In Idle mode, launch the web
browser.
In Menu mode, select a highlighted
menu option or confirm input.
Make or answer a call.
In Idle mode, retrieve numbers
recently dialled, missed, or
received.
Delete characters from the display.
In Menu mode, return to the
previous menu level.
Press and hold to switch the phone
on or off.
End a call.
In Menu mode, cancel input and
return the phone to Idle mode.
Enter numbers, letters, and some
special characters.
In Idle mode, press and hold [
1
] to
access your voicemail server. Press
and hold [
0
] to enter an
international call prefix.
Enter special characters.
Press and hold [ ] to activate or
deactivate the Silent profile. Press
and hold [ ] to enter a pause
between numbers.
Adjust the phone volume.
In Idle mode, with the phone open,
adjust the key tone volume. With
the phone closed, press and hold
to turn on the backlight.
Get started
11
Display
Press and hold to turn on the
camera.
In Camera mode, take a photo or
record a video.
Layout
Text and graphics
display messages,
instructions, and
information you enter.
Soft key function
indicators
show the current
functions assigned to
the soft keys.
Icons
display various icons.
Menu BigPond
Icons
Received signal strength
Accessing services in a 2.5G
(GPRS) network; when
transferring data, this icon
animates
Accessing services in an
EDGE network; when
transferring data, this icon
animates
Accessing services in a 3G
(UMTS) network; when
transferring data, this icon
animates
Roaming network
Call diverting feature active
p. 99
Call in progress
Out of your service area; you
cannot make or receive calls
Get started
12
Bluetooth active; When
transferring data, this icon
blinks red and blue
p. 101
Bluetooth hands-free car kit
or headset connected
p. 101
Connected with PC via a USB
port
Browsing Internet on PC
using the phone as modem
Connected to secured web
page
Alarm set
p. 48
New message:
•: SMS
• : MMS
• : E-mail
• : Voicemail
• : Push
• : Configuration
message
Inbox full:
•: SMS
• : MMS
•: E-mail
•: Voicemail
•: Push
• : Configuration
message
Profile setting
p. 95
•None: Normal
• : Meeting
• : Driving
•: Silent
•: Outdoor
• : Offline
Battery power level
Get started
13
Access menu functions
Use the
soft keys
The roles of the soft keys vary
depending on the function you
are using. The bottom line of the
display indicates their current
role.
Press the left
soft key to select
the highlighted
option.
Press the right
soft key to return
to the previous
menu level.
Select Back
Select an
option
1. Press a desired soft key.
2. Press the Navigation keys to
move to the next or previous
option.
3. Press <
Select
> or [ ] to
confirm the function displayed
or option highlighted.
4. To exit, choose either of the
following methods:
• Press <
Back
> or [
C
] to
move up one level.
• Press [ ] to return to Idle
mode.
Use
shortcuts
Press the number key
corresponding to the option you
want.
Get started
14
Customise your phone
1. In Idle mode, press
<
Menu
> and select
Settings
→
Phone
→
Language
→
Screen text
.
2. Select a language.
3. Press <
Save
>.
You can change the call
ringtone by changing the
properties of the currently
active sound profile.
To change the profile
properties:
1. In Idle mode, press
<
Menu
> and select
Settings
→
Profiles
.
Display
language
Call ringer
melody
2. Scroll to the sound profile
you are using.
3. Press <
Options
> and
select
Edit
.
4. Select
Voice call ringtone
and select a ringtone for
voice calls.
5. Press <
Options
> and
select
Save
.
To change the sound profile:
1. In Idle mode, press
<
Menu
> and select
Settings
→
Profiles
.
2. Select the profile you want.
Get started
15
You can set a wallpaper for the
idle screen on each display.
For the main display:
1. In Idle mode, press
<
Menu
> and select
Settings
→
Display
settings
→
Main display
→
Wallpaper
.
2. Scroll to an image folder
.
3. Select an image.
4. Press <
Set
>.
Idle mode
wallpaper
For the external display:
1. In Idle mode, press
<
Menu
> and select
Settings
→
Display
settings
→
Front display
→
Wallpaper
.
2. Select an image type.
3. For
Clock
, scroll to a clock
type and press <
Save
>.
For
Screen slogan
,
enter a greeting and
press <
Save
>.
For
My image
, press
<
Change
> and select
an image.
4. Press <
Change
>.
Get started
16
You can set the Navigation
keys to function as shortcuts to
access your favourite menus.
1. In Idle mode, press
<
Menu
> and select
Settings
→
Phone
settings
→
Shortcuts
.
2. Select a key.
3. Select a menu to be
assigned to the key.
You can activate the Silent
profile to avoid disturbing
other people.
In Idle mode, press and hold
[].
Menu
shortcuts
Silent profile
You can protect the phone
against unauthorised use with
a phone password. The phone
will require the password on
power-up.
1. In Idle mode, press
<
Menu
> and select
Settings
→
Security
→
Change phone password
.
2. Enter the default password,
00000000
, and press
<
Confirm
>.
3. Enter a new 4- to 8-digit
password and press
<
Confirm
>.
Phone lock
Get started
17
Make/Answer calls
4. Enter the new password
again and press
<
Confirm
>.
5. Select
Phone lock
.
6. Select
On
.
7. Enter the password and
press <
Confirm
>.
1. Enter an area code and
phone number.
2. Press [ ].
3. To end the call, press [ ].
1. When the phone rings,
press [ ].
2. To end the call, press [ ].
Press [ / ].
Make a call
Answer
a call
Adjust the
volume
during a call
18
Step outside the phone
Begin with your camera, the media player, the web,
and other special features
Use the camera
1. Open the phone.
2. In Idle mode, press and hold
[ ] to turn on the camera.
3. Aim the lens at the subject
and make any desired
adjustments.
4. Press [ ] or [ ] to take a
photo. The photo is saved
automatically.
5. Press <
Back
> to take
another photo.
Take a photo
1. In Idle mode, press
<
Menu
> and select
My
files
→
Images
.
2. Select the photo you want
from the
Photos
folder.
1. In Idle mode, press and hold
[ ] to turn on the camera.
2. Press [
1
] to switch to Record
mode.
3. Press [ ] or [ ] to start
recording.
4. Press [ ] or [ ] to stop
recording. The video is
saved automatically.
5. Press <
Back
> to record
another video.
View a
photo
Record a
video
Step outside the phone
19
Play media files
1. In Idle mode, press
<
Menu
> and select
My
files
→
Video
.
2. Select the video you want
from the
Videos
folder.
Use these methods:
• Download from the wireless
web
p. 57
• Download from a computer
using the optional Samsung
PC Studio
Samsung PC
Studio User’s Guide
• Receive via Bluetooth
p. 104
Play a video
Copy media
files to the
phone
1. In Idle mode, press
<
Menu
> and select
Applications
→
Media
player
.
2. Press [ ].
3. Press <
Options
> and
select
Add
→
Folder
or
Files
.
4. Scroll to the folder you
want, or press [ ] to select
the files you want.
5. Press <
Select
> or <
Add
>.
6. Press <
Back
> to return to
the media player screen.
Create a
play list
Step outside the phone
20
Browse the web
Using a built-in web browser, you can easily
access the wireless web to get a variety of up-
to-date services and information and to
download web content.
1. From the media player
screen, press [ ].
2. Select the file you want.
3. During playback, use the
following keys:
•: pauses or resumes
playback.
• Left: returns to the
previous file. Moves
backward in a file when
held down.
• Right: skips to the next
file. Skips forward in a
file when held down.
• / : adjusts the
volume.
4. Press [Down] to stop
playback.
Play media
files
In Idle mode, press
<
BigPond
>.
• To scroll through browser
items, press [Up] or
[Down].
• To select an item, press
<
Select
> or [ ].
• To return to the previous
page, press <
Back
>.
• To access options, press
<
Options
>.
Launch the
web browser
Navigate
the web
Step outside the phone
21
Use Phonebook
To the phone’s memory:
1. In Idle mode, enter a phone
number.
2. Press <
Options
> and select
Save to Phonebook
→
Phone
→
New
→
a number
type.
3. Specify contact information:
First name, Last name,
Phone number, Work Email,
Home Email, Group,
Homepage, Birthday, and
More information (Job title,
Department, Company,
Nickname, and Notes).
4. Press <
Options
> and select
Save
to save the contact.
Add a
contact
To the USIM/SIM card:
1. In Idle mode, enter a phone
number.
2. Press <
Options
> and
select
Save to Phonebook
→
SIM
→
New
.
3. Specify contact information:
Name, Phone number,
Group (for USIM), and
Location number.
4. Press [ ] to save the
contact.
Step outside the phone
22
Send messages
1. In Idle mode, press [ ].
2. Enter the first few letters of
the name you want.
3. Select a contact.
4. Scroll to a number and
press [ ] to dial, or press
[ ] to edit contact
information.
1. In Idle mode, press
<
Menu
> and select
Phonebook
→
My
business card
.
2. Specify your contact
information.
3. Press <
Options
> and select
Save
to save the name card.
Find a
contact
Create and
send a name
card
4. To send the name card,
access
My business card
again.
5. Press <
Options
> and select
Send
business card
→
a
sending method.
1. In Idle mode, press <
Menu
>
and select
Messages
→
Create new
→
SMS
.
2. Enter the message text and
press [ ].
3. Enter destination numbers.
4. Press [ ] to send the
message.
Send a text
message
(SMS)
Step outside the phone
23
1. In Idle mode, press
<
Menu
> and select
Messages
→
Create new
→
MMS
.
2. Enter the message subject.
3. Select
Text
.
4. Enter the message text and
press [ ].
5. Select
Picture or Video
or
Audio
.
6. Add an image, a video clip,
or a sound clip.
7. Press [ ].
8. Enter destination numbers
or e-mail addresses.
9. Press [ ] to send the
message.
Send a
multimedia
message
(MMS)
1. In Idle mode, press
<
Menu
> and select
Messages
→
Create new
→
Email
.
2. Enter the e-mail subject.
3. Move to the
Message
field.
4. Enter the e-mail text.
5. Move to the
Attach files
line.
6. Press <
Options
> and
select
Add files
,
Add
name card
, or
Add
v-calendar
.
7. Select images, videos,
sounds, name cards, or
calendar data.
Send an
e-mail
Step outside the phone
24
View messages
8. Press <
Options
> and
select
Attach
.
9. Press [ ].
10.Enter e-mail addresses.
11.Press [ ] to send the
e-mail.
When a notification appears:
1. Press <
View
>.
2. Select the message from
the Inbox.
Send an
e-mail
(continued)
View a text
message
From the Inbox:
1. In Idle mode, press
<
Menu
> and select
Messages
→
Inbox
.
2. Select an SMS message
().
When a notification appears:
1. Press <
View
>.
2. Select the message from
the Inbox.
From the Inbox:
1. In Idle mode, press
<
Menu
> and select
Messages
→
Inbox
.
2. Select an MMS message
().
View a
multimedia
message
Step outside the phone
25
Use Bluetooth
Your phone is equipped with Bluetooth
technology, enabling you to connect the phone
wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or
control the phone remotely.
1. In Idle mode, press
<
Menu
> and select
Messages
→
Email inbox
.
2. Press <
Options
> and
select
Download
to
download new e-mails or
headers.
3. Select an e-mail or a
header.
4. If you selected a header,
press <
Options
> and
select
Retrieve
to view the
body of the e-mail.
View an
e-mail
1. In Idle mode, press
<
Menu
>
and select
Settings
→
Connectivity
→
Bluetooth
→
Activation
→
On
.
2. Select
My phone’s
visibility
→
On
to allow
other devices to find your
phone.
Turn on
Bluetooth
Step outside the phone
26
1. In Idle mode, press
<
Menu
>
and select
Settings
→
Connectivity
→
Bluetooth
→
My devices
→
Search new device
.
2. Select a device.
3. Enter a Bluetooth PIN or the
other device’s Bluetooth
PIN, if it has one, and press
<
OK
>.
When the owner of the
other device enters the
same code, pairing is
complete.
Search for
and pair
with a
Bluetooth
device
1. Access an application,
Phonebook
,
My files
,
Calendar
,
Schedule
, or
Task
.
2. Select the item you want to
send.
3. Press <
Options
> and
select
Send business
card
/
Send via
/
Send
schedule
/
Send task
→
Bluetooth
or
Via
bluetooth
.
4. Select a device.
5. If necessary, enter the
Bluetooth PIN and press
<
OK
>.
Send data
Step outside the phone
27
Switch applications
You can switch to other applications from a
menu, without closing the menu screen you
were using.
1. When a device attempts to
access your phone, press
<
Yes
> to permit the
connection.
2. If necessary, press <
Yes
>
to confirm that you are
willing to receive.
1. While using a menu, press
[].
2. Select an application.
Receive
data
Switch to an
application
•
Call
: opens the dialling
screen.
•
Messages
: accesses the
Messages
menu.
•
Browser
: launches the web
browser.
1. Press [ ].
2. Scroll to
End all?
.
3. Press <
Select
>.
Available
applications
Close all
running
applications
28
Enter text
ABC, T9, Number, and Symbol modes
You can enter text for some features such as
Messages, Phonebook, or Organiser, using ABC
mode, T9 mode, Number mode, and Symbol
mode.
Changing the text input mode
• Press and hold [ ] to switch between T9
() and ABC () modes.
• Press [ ] to change case or to switch to
Number mode ( ).
• Press and hold [ ] to switch to Symbol
mode ( ).
Using T9 mode
T9 is a predictive text input mode that allows
you to enter any character using single
keystrokes.
Entering a word in T9 mode
1. Press [
2
] to [
9
] to start entering a word.
Press each key once for each letter.
For example, press [
4
], [
3
], [
5
], [
5
], and
[
6
] to enter Hello in T9 mode.
T9 predicts the word that you are typing,
and it may change with each key that you
press.
2. Enter the whole word before editing or
deleting characters.
Enter text
29
3. When the word displays correctly, go to step
4. Otherwise, press [
0
] to display alternative
word choices for the keys that you have
pressed.
For example, Of and Me use [
6
] and [
3
].
4. Press [ ] to insert a space and enter the
next word.
Other T9 mode operations
•Press [
1
] to enter periods or apostrophes
automatically.
• Press [ ] to insert a space.
• Press the Navigation keys to move the
cursor.
•Press [
C
] to delete characters one by one.
Press and hold [
C
] to clear the entire display.
Adding a new word to the T9 dictionary
This feature may not be available for some
languages.
1. Enter the word that you want to add.
2. Press [
0
] to display alternative words for
your key presses. When there are no more
alternative words,
Spell
displays on the
bottom line.
3. Press <
Spell
>.
4. Enter the word you want using ABC mode
and press <
Add
>.
Enter text
30
Using ABC mode
Press the appropriate key until the character
you want appears on the screen.
(Creating an SMS message with GSM alphabet
encoding)
Other ABC mode operations
• To enter the same letter twice or to enter a
different letter on the same key, wait for the
cursor to move to the right automatically or
press [Right]. Then, enter the next letter.
• Press [ ] to insert a space.
• Press the Navigation keys to move the
cursor.
•Press [
C
] to delete characters one by one.
Press and hold [
C
] to clear the entire display.
Using Number mode
Number mode enables you to enter numbers.
Press the keys corresponding to the digits you
want.
Key Characters in order displayed
Upper case Lower case
31
Using Symbol mode
Symbol mode enables you to insert symbols.
Call functions
Advanced calling features
Making a call
1. In Idle mode, enter an area code and phone
number.
2. Press [ ].
3. When you want to end the call, press [ ].
Making an international call
1. In Idle mode, press and hold [
0
]. The
+
character appears.
2. Enter the country code, area code, and
phone number, then press [ ].
To Press
display more symbols [Up] or [Down].
select a symbol the corresponding
number key.
clear the entered
symbols
[
C
].
insert the symbols <
OK
>.
• Press [
C
] to clear the last digit or press and
hold [
C
] to clear the whole display.
• Press and hold [ ] to enter a pause
between numbers.
Call functions
32
Redialling recent numbers
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press
[].
Making a call from Phonebook
Once you have stored a number in Phonebook,
you can dial the number by selecting it from
Phonebook.
p. 40
You can also use the speed dial feature to
assign your most frequently dialled numbers to
specific number keys.
p. 43
You can quickly dial a number from the SIM
card using its location number assigned when
stored.
1. In Idle mode, enter a location number and
press [ ].
2. Scroll through other numbers, if necessary.
3. Press <
Call
> or [ ] to make a call.
Answering a call
When you receive an incoming call, the phone
rings and displays the incoming call image.
Press <
Accept
> or [ ] to answer the call.
Tips for answering a call
• When
Any key
is active, you can press any
key, except for <
Reject
> and [ ]
.
p. 98
• When
Active folder
is active, you can
simply open the phone.
p. 99
•Press <
Reject
> or [ ] to reject a call.
• With the phone closed, press and hold [ / ]
to reject a call.
Viewing missed calls
If you have missed calls, the screen displays
how many calls you have missed.
1. Press <
View
>.
Call functions
33
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
Using the headset
Use the headset to make or answer calls
without holding the phone.
Connect the headset to the jack on the right
side of the phone. The button on the headset
works as follows:
Options during a call
You can access a number of functions during a
call.
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume during
a call.
Press [ ] to increase the volume level and [ ]
to decrease the volume level.
Placing a call on hold/Retrieving
Press <
Hold
> to place a call on hold, or press
<
Unhold
> to retrieve the call.
Making a second call
You can make another call if your network
supports this function.
To Press
redial the last call the button twice.
answer a call the button.
end a call and hold the button.
Call functions
34
1. Press <
Hold
> to put the call on hold.
2. Make the second call in the normal way.
3. Press <
Swap
> to switch between the calls.
4. Press <
Options
> and select
Drop
→
Drop
held
call
to end the call on hold.
5. To end the current call, press [ ].
Answering a second call
You can answer an incoming call while already
on the phone, if your network supports this
function and you have activated the call waiting
feature.
p. 100
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press <
Swap
> to switch between the calls.
3. Press <
Options
> and select
Drop
→
Drop
held
call
to end the call on hold.
4. To end the current call, press [ ].
Using the speakerphone feature
Use the phone as a speakerphone to talk and
listen with the phone a short distance away.
Press [ ] and then <
Yes
> to activate the
speakerphone feature. Press [ ] again to
switch back to the earpiece.
Using In-call options
During a call, press <
Options
> to access the
following options:
•
Loudspeaker
/
Loudspeaker off
: turn on
the speakerphone feature or switch back to
Normal mode.
•
Join
: set up a multi-party call by adding a
caller on hold to a currently active call. You
can include up to 5 people on a multi-party
call.
Call functions
35
•
Split
: have a private conversation with one
multi-party call participant. The other
participants can converse with each other.
After the private conversation, select
Join
to
return both private participants to the multi-
party call.
•
Drop
: disconnect the call currently on hold
or active call.
•
Drop call
: disconnect one multi-party call
participant.
•
Transfer
: transfer the currently active call
to a caller on hold. The two callers can talk
to each other, but you are disconnected from
the call.
•
Unmute
/
Mute
: switch off the phone's
microphone so that the other person on the
phone cannot hear you, or switch it back on.
•
Mute key tone
/
Unmute key tone
: turn
the key tones off or on.
•
New call
: make a new call.
•
Contacts
: locate or store contacts in
Contacts.
•
Send text message
: create and send a
new SMS message.
•
Send DTMF
: send DTMF (Dual tone multi-
frequency) tones as a group. The DTMF
tones are the tones used in phones for tone
dialling, sounding when you press the
number keys. This option is helpful for
entering a password or an account number
when you call an automated system, like a
banking service.
•
Memo
: create a memo.
To communicate with answering machines or
computerised telephone systems,
Unmute
key tone
must be selected.
36
•
PocketNews
: access PocketNews if
supported by your USIM/SIM card.
•
End call
/
End calls
: disconnect the call
currently on hold, active call, or all calls.
•
Save to Contacts
: save the entered
number to Phonebook.
•
Save to memo
: save the entered number
as a memo.
Menu functions
All menu options listed
Call log
(Menu 1)
Use this menu to view the calls you have
dialled, received, or missed, the length of the
calls. You can also check the cost of your calls,
if your USIM/SIM card supports this function.
To access this menu, press <
Menu
> in Idle
mode and select
Call log
.
Recent contacts
(Menu 1.1)
This menu displays the most recent calls you
have dialled, received, or missed.
Accessing a call log
1. Press [Left] or [Right] to move to another
call type.
Menu functions
Call log
(Menu 1)
37
2. Press [Up] or [Down] to scroll through the
call list.
3. Press [ ] to view the details of a call, or
[ ] to dial a number.
Using call log options
While viewing call details, press <
Options
> to
access the following options:
•
Call back
: make a call to the number.
•
Save to Phonebook
: save the number to
Phonebook.
•
Send message
: send a message to the
selected number via SMS or MMS.
•
Delete
: delete the selected call log.
Missed calls
(Menu 1.2)
This menu displays the most recent calls you
did not answer.
Dialled calls
(Menu 1.3)
This menu displays the most recent calls you
have dialled.
Received calls
(Menu 1.4)
This menu displays the most recent calls you
have received.
Delete all
(Menu 1.5)
Use this menu to delete all logs in each call
type.
1. Press [ ] to select the call types to be
cleared.
2. Press <
Delete
>.
3. Press <
Yes
> to confirm the deletion.
Menu functions
38
4. Enter the phone password and press
<
Confirm
>.
Call time
(Menu 1.6)
This menu displays the time log for calls made
and received. The actual time invoiced by your
service provider will vary.
•
Last call time
: check the length of your last
call.
•
Total sent
: check the total length of calls
dialled.
•
Total received
: check the total length of
calls received.
•
Total time
: check the total length of calls
you have dialled and received.
•
Reset timers
: reset all counters.
Data volume
(Menu 1.7)
Use this menu to view the total amount of sent
or received data.
•
Recent volume
: check the recent amount
of data you have sent.
•
Total volume
: check the total amount of
data you have sent or received.
•
Reset volume
: reset all counters.
If the phone is locked, it will require the
phone password. The password is preset to
00000000
. You can change this password.
p. 109
If the phone is locked, it will require the phone
password. The password is preset to
00000000
.
You can change this password.
p. 109
If the phone is locked, it will require the phone
password. The password is preset to
00000000
.
You can change this password.
p. 109
Menu functions
Phonebook
(Menu 2)
39
Data call time
(Menu 1.8)
Use this menu to view the time log for data
calls.
•
Recent time
: check the length of the recent
data calls.
•
Total time
: check the total length of data
calls.
•
Reset timers
: reset all counters.
Call cost
(Menu 1.9)
This network feature displays the cost of calls.
This menu is available only if supported by your
USIM/SIM card. Note that this is not intended
to be used for billing purposes.
•
Last call cost
: check the cost of your last
call.
•
Total cost
: check the total cost of all your
calls. If the total cost exceeds the maximum
cost set in
Set max cost
, you must reset
the counter before you make another call.
•
Max cost
: check the maximum cost set.
•
Reset counters
: reset the cost counters.
•
Set max cost
: set the maximum cost
authorised for your calls.
•
Price/Unit
: set the currency that is applied
when the cost of your call is calculated.
Phonebook
(Menu 2)
You can store phone numbers on your USIM/
SIM card and in your phone’s memory. The
USIM/SIM card and phone’s memory are
physically separate, but they are used as a
single entity called Phonebook.
To access this menu, press <
Menu
> in Idle
mode and select
Phonebook
.
If the phone is locked, it will require the phone
password. The password is preset to
00000000
.
You can change this password.
p. 109
Menu functions
40
Search contact
(Menu 2.1)
Use this menu to search for contact information
in Phonebook.
Finding a contact
1. Enter the first few letters of the name that
you want to find.
2. Select a contact from the list.
3. Scroll to a number and press [ ] to dial, or
press [ ] to edit contact information.
Using contact options
While viewing contact details, press
<
Options
> to access the following options:
•
Edit
: edit contact information.
•
Send message
: send a message via SMS or
MMS.
•
Special options
: set the following options:
Picture
: assign a caller ID image to alert
you to a call from the person.
Ringtone
: assign a ringtone to alert you to
a call from the person.
Msg.
alert tone
: select a ringtone to alert
you to an incoming message from the
person.
•
Add to speed dial
: set the selected number
as a speed dial entry.
•
Copy to SIM
/
Copy to phone
: copy the
contact from the phone’s memory to the
USIM/SIM card, or vice versa.
•
Send business card
: send the contact via
SMS or Bluetooth.
•
Use number
: paste the selected number to
the normal dialling screen.
•
Delete
: delete the contact.
You can quickly access this menu by pressing
[ ] in Idle mode.
Menu functions
Phonebook
(Menu 2)
41
New contact
(Menu 2.2)
Use this menu to add a new contact to
Phonebook.
Storing a contact to the phone’s
memory
1. Select
Phone
.
2. Change the settings or enter information
about the contact:
•
First name
/
Last name
: assign a name.
•
Phone number
: add a phone number.
•
Work Email
: assign a business e-mail
address.
•
Home Email
: assign a personal e-mail
address.
•
Group
: assign a caller group.
•
Homepage
: enter a homepage address.
•
Birthday
: enter the person’s birthday.
•
More information
: enter the job title,
department, company, nickname, and
additional note of the person.
3. Press <
Options
> and access the following
options to add additional information:
•
Special options
: assign a caller ID
image, call ringer, or message ringer for
the contact.
•
Add item
: add a phone number in any
type to the contact.
•
Delete item
: remove the selected
number type from the contact.
•
Change type
: change the number type
from the contact.
4. Press <
Options
> and select
Save
to save
the contact.
Menu functions
42
Storing a contact to the USIM/SIM card
1. Select
SIM
.
2. Enter information about the contact:
•
Name
: assign a name.
•
Phone number
: add a phone number.
•
Group
: (For USIM) assign a caller group.
•
Location number
: enter a location
number.
3. If you are using a USIM card, press
<
Options
> to add additional information:
•
Add item
: add a information type to the
contact.
•
Delete item
: remove the selected type
from the contact.
4. Press [ ] to save the contact.
Groups
(Menu 2.3)
Use this menu to create and manage caller
groups.
Creating a caller group
1. Press <
Options
> and select
Add group
.
2. Enter a group name and press <
Save
>.
Adding members to a caller group
1. Select a group.
2. Press [ ] to select the contacts to be
added.
3. Press <
Save
>.
Managing caller groups
From the group list, press <
Options
> to access
the following options:
•
Add member
: add a member to the
selected group.
•
View members
: display the members of
the selected group.
•
Add group
: add a new group.
•
Rename group
: change the group name.
Menu functions
Phonebook
(Menu 2)
43
•
Delete group
: delete the selected group or
all groups. Group members, however, will
not be deleted from Contacts.
Speed dial list
(Menu 2.4)
Use this menu to assign speed dial numbers (2
to 9) to 8 of your most frequently dialled
numbers.
Assigning speed dial numbers
1. Select a key location from
2
to
9
. Key
1
is
reserved for your voicemail server.
2. Select a contact from the contact list.
3. Select a number.
Managing speed dial entries
From the Speed dial list screen, press
<
Options
> to access the following options:
•
Add
: assign a number to an unassigned key.
•
Details
: check the name and number
assigned to a key.
•
Change
: assign a different number to a key.
•
Remove
: clear the speed dial setting for a
key.
Dialling speed dial numbers
In Idle mode, press and hold the appropriate
key.
My business card
(Menu 2.5)
Use this menu to create your name card and
send it to other people.
Saving your name card
The procedure for creating your name card is
the same as the one for saving a phone number
in the phone’s memory.
p. 41
Menu functions
44
Using name card options
After saving your name card, press <
Options
>
to access the following options:
•
Edit
: edit the name card.
•
Send business card
: send the name card
via SMS or Bluetooth.
•
Delete
: delete the name card.
Copy all
(Menu 2.6)
Use this menu to copy all of the contacts stored
on the USIM/SIM card to the phone’s memory,
or vice versa.
Own number
(Menu 2.7)
Use this feature to check your phone numbers,
or to assign a name to each of the numbers.
Changes made here do not affect the actual
subscriber numbers on your USIM/SIM card.
FDN list
(Menu 2.8)
Use this menu to create a list of contacts to be
used in FDN (Fixed Dialling Number) mode, in
which the phone allows outgoing calls only to
the specified phone numbers. This menu is
available if your SIM/USIM card supports the
FDN feature.
Adding a contact
1. Press <
Options
> and select
New
.
2. Enter your PIN2 supplied with your SIM/
USIM card and press <
Confirm
>.
3. Enter information about the contact:
•
Name
: assign a name.
•
Phone number
: add a phone number.
•
Location
: assign a location number.
4. Press <
Save
>.
You can activate FDN mode in the
FDN mode
menu.
p. 109
Menu functions
Applications
(Menu 3)
45
Using contact options
From the FDN list, you can access the same
contact options as in Phonebook by pressing
<
Options
>.
p. 40
Service number
(Menu 2.9)
Use this menu to view the list of Service Dialling
Numbers (SDN) assigned by your service
provider, including emergency numbers and
numbers for directory enquiries. This menu is
available if your USIM/SIM card supports SDN.
Scroll to the number you want and press [ ].
Settings
(Menu 2.10)
Use this menu to change the default settings for
Phonebook entries.
•
Viewing settings
: change the sort order of
the contact list.
•
Default storage settings
: select a default
memory location for saving contacts. If you
select
Optionally
, the phone will ask you to
select a memory location each time you save
a number.
Memory status
(Menu 2.11)
Use this menu to check the number of contacts
you have stored in the phone’s memory and on
the USIM/SIM card.
Applications
(Menu 3)
Use this menu to play media files and use
convenient features, such as a world clock, a
voice recorder, calculator, and converter.
To access this menu, press <
Menu
> in Idle
mode and select
Applications
.
Menu functions
46
Media player
(Menu 3.1)
You can play music and video files.
Downloading or receiving music or
video files
You can play the following types of files on your
phone:
• Music: MP3, AAC, WAV, 3GA, M4A
• Video: MP4, 3GP, RM, RAM, RV
Use the following methods to save music or
video files to your phone’s memory:
• Download from the wireless web
p. 57
• Download from a computer using Samsung
PC Studio
Samsung PC Studio User’s
Guide
• Receive via an active Bluetooth connection
p. 104
Downloaded or received files are stored in the
Downloads
folder in
Music
or
Video
.
Creating a play list
Add the media files to the play list so you can
play them.
1. From the media player screen, press [ ].
2. Press <
Options
> and select
Add
.
3. Select
Folder
or
Files
.
4. Scroll to the folder you want or press [ ] to
select the files you want.
5. Press <
Select
> or <
Add
>.
6. Press <
Back
> to return to the media player
screen.
Playing media files
1. From the media player screen, press [ ].
2. Select a file. The file plays.
During playback, use the following keys:
Key Function
Pauses or resumes playback.
Menu functions
Applications
(Menu 3)
47
Using media player options
From the media player screen, press
<
Options
> to access the following options:
•
Play
: play the selected file.
•
Pause
/
Resume
: pause or resume playback.
•
Stop
: stop playback.
•
Send via
: send the file via MMS, e-mail, or
Bluetooth.
•
Add to playlist
: add the file to the play list.
•
Open playlist
: access the play list.
•
Activate key
: get a new licence key when
the key for the selected DRM file expires.
•
Reactivate key
: get another licence key
even when the key for the selected DRM file
has not expired.
•
Go to My files
: access all music and video
files.
•
Details
: access the file properties.
•
Player settings
: change the default
settings for playing media files:
Play options
: select a repeat mode.
Volume
: select a volume level.
Audio player skin
: select a skin image.
•
VOD settings
:
select a connection profile to
be used for accessing a video streaming
server. You can also create or edit a profile.
p. 105
•
Key management
: manage the licence
keys you have acquired.
Left Returns to the previous file. Moves
backward in a file when held down.
Right Skips to the next file. Moves
forward in a file when held down.
/ Adjusts the volume.
Down Stops playback.
Key Function
Menu functions
48
Using play list options
From the media player screen, press [ ]. Press
<
Options
> to access the following options:
•
Play
: begin playback.
•
Add
: add files to the play list.
•
Remove
: remove the selected file or all files
from the current play list.
•
Move
: move the selected file to the position
you want within the current play list or
another play list.
•
Copy
: make a copy of the selected file in the
current play list or another play list.
•
New list
: add a new play list.
Alarm
(Menu 3.2)
Use this menu to set alarms to sound at specific
times. The alert type for a normal alarm
corresponds to the call alert type settings in the
currently selected profile. A wake-up alarm is
not be affected by your profile setting.
Setting an alarm
1. Select the type of alarm.
2. Set each alarm option:
•
Alarm
: activate the alarm.
•
Time
: enter the time for the alarm to
sound.
•
Repeat
: select a repeat option.
•
Alert tone
: select an alarm tone.
3. Press <
Options
> and select
Save
.
Stopping an alarm
When the time for an alarm comes and the
alarm sounds:
• For a non-wake-up alarm, press any key.
• For a wake-up alarm, press <
OK
> or [ ].
Press any key, except for <
OK
> and [ ], to
cause it to sound again after 5 minutes.
Menu functions
Applications
(Menu 3)
49
Deactivating an alarm
1. Select the alarm you want to deactivate.
2. Select
Off
on the
Alarm
line.
3. Press [ ].
Record audio
(Menu 3.3)
Use this menu to record voice memos.
Recording a voice memo
1. Press [ ] to start recording.
2. Speak into the microphone.
Press [ ] to pause or resume the recording.
3. Press <
Stop
>. The voice memo is saved
automatically.
4. Press [ ] to review the memo, or press
[Up] to record additional memos.
Playing a voice memo
1. From the voice recorder screen, press
<
Options
> and select
Go to voice memos
.
2. Select a voice memo from the
Voice
memos
folder. The memo plays.
During playback, use the following keys:
Key Function
Pauses or resumes playback.
Left Moves backward in a file.
Right Moves forward in a file.
/ Adjusts the volume.
Down Stops playback.
Menu functions
50
Using voice recorder options
After playback, press <
Options
> to access the
following options:
•
Play
: play the selected voice memo in
Review mode.
•
Record
: record a new voice memo.
•
Send via
: send the file via MMS, e-mail, or
Bluetooth.
•
Activate key
: get a new licence key when
the key for the selected DRM file expires.
•
Reactivate key
: get a new licence key even
when the key for the selected DRM file has
not expired.
•
Set as ringtone
: set the file as your
ringtone for calls.
•
Key management
: manage the licence
keys you have acquired.
•
Go to Voice memos
: access the voice
memo list.
•
Rename
: change the file name.
•
Delete
: delete the file.
•
Bluetooth visibility
: share the file with
other Bluetooth devices or hide the file so
that other Bluetooth devices cannot access
it.
•
Details
: access the file properties.
•
Record settings
: customise the default
settings for the voice recorder:
Default name
: change the default prefix of
file names.
Recording time
:
select a maximum
recording time.
Organizer
(Menu 3.4)
Use this menu to use the calendar feature.
Menu functions
Applications
(Menu 3)
51
Calendar
(Menu 3.4.1)
Use this menu to keep track of your schedule.
Selecting a day on the calendar
When you enter the
Calendar
menu, the
calendar appears with today’s date indicated by
a coloured box.
• Press [Left] or [Right] to move by day.
• Press [Up] or [Down] to move by week.
• Press [ / ] to move by month.
Creating an item
You can store scheduled items, anniversaries,
tasks, and memos on the calendar. More than
one item per day can be stored.
To enter a scheduled item:
1. Select a date on the calendar.
2. Press <
Options
> and select
New
→
Schedule
.
3. Enter information or change the settings:
•
Title
: enter the title for the scheduled
item.
•
Details
: enter the details of the
scheduled item.
•
Start
and
End
: enter the starting and
ending times for the scheduled item.
•
Start date
and
End date
: enter the
starting and ending dates for the
scheduled item.
•
Location
: enter information about the
scheduled item.
•
Alarm
: set an alarm for the scheduled
item.
•
before
: set how long before the
scheduled item the alarm is to alert you.
•
Repeat
: set the scheduled item to recur.
You can select a repeat unit.
•
until
: set the ending date, if the
scheduled item will recur.
Menu functions
52
•
Expiry
: change the expiry setting.
4. Press <
Options
> and select
Save
to save
the scheduled item.
To enter an anniversary:
1. Select a date on the calendar.
2. Press <
Options
> and select
New
→
Anniversary
.
3. Enter information or change the settings:
•
Occasion
: enter information about the
anniversary.
•
Date
: enter the date.
•
Alarm
: set an alarm for the anniversary.
•
before
: set how long before the
anniversary the alarm is to alert you.
•
alarm time
: enter the time for the alarm
to sound.
•
Repeat every year
: set the phone to
remind you of the anniversary every year.
4. Press <
Options
> and select
Save
to save
the anniversary.
To enter a task:
1. Select a date on the calendar.
2. Press <
Options
> and select
New
→
Task
.
3. Enter information or change the settings:
•
Title
: enter the title for the task.
•
Task
: enter the task content.
•
Start date
: enter the starting date.
•
Due date
: enter the ending date.
•
Priority
: select a priority level.
4. Press <
Options
> and select
Save
to save
the task.
To e nt er a m em o:
1. Select a date on the calendar.
2. Press <
Options
> and select
New
→
Memo
.
3. Enter the memo text and press [Down].
4. Enter the date.
5. Press <
Options
> and select
Save
to save
the memo.
Menu functions
Applications
(Menu 3)
53
Consulting the calendar
Once you have scheduled items, the square
brackets appear on the corner of the date cell.
To view an item:
1. Select a date on the calendar to display the
items for the day. The following icons
indicate the type of item:
• Scheduled items
• Anniversaries
• Tasks
• Memos
2. Select an item to view its details.
From the item list, press <
Options
> to access
the following options:
•
View
: access the item.
•
New
: add a new item.
•
Completed
/
To do
: change the status of the
selected task.
•
Month view
: switch to the monthly view
screen.
•
Week view
: switch to the weekly view
screen.
•
Change date
/
Change due date
/
Reschedule
: change the date of the item.
•
Delete
: delete the selected item or all
items.
•
Send schedule
/
Send task
: send the item
via SMS or Bluetooth.
•
Send memo
: send the memo via SMS.
To use calendar options:
From the calendar, press <
Options
> to access
the following options:
•
View
: display the items stored for the
selected date.
•
New
: add a new item.
•
Week view
: display the weekly view
screen.
Menu functions
54
•
Go to today
:
go to today’s date.
•
Go to date
:
enter a specific date.
•
Starting day
: set whether the calendar
starts with Sunday or Monday.
•
Delete
: delete the items for the specific
period or all of the items in the calendar.
Week view
(Menu 3.4.2)
You can view items for the selected week. A
coloured box on the timetable indicates the
presence of a scheduled item. Select a box for
the date you want.
Today’s event
(Menu 3.4.3)
You can view items for the selected date.
Select an item to view its details. The item
opens in Edit mode.
Schedule
(Menu 3.4.4)
This menu displays the scheduled items. If you
have set the Repeat and Alarm options, the
and icons display.
Select a scheduled item to view its details.
Anniversary
(Menu 3.4.5)
This menu displays anniversaries you have
created. If you have set the Repeat and Alarm
options, the and icons display.
Select an anniversary to view its details.
Task
(Menu 3.4.6)
Use this menu to display tasks you have
created. The icons on the right indicate the
importance; the lower the number on the icon,
the higher the priority. A check mark appears in
the status check box if the task has been
completed.
Select a task to view its details.
Menu functions
Applications
(Menu 3)
55
Memo
(Menu 3.4.7)
This menu displays memos you have created.
Select a memo to view its details.
Missed event alarm
(Menu 3.4.8)
When you are unable to acknowledge an alarm
for an item, the phone stores the missed alarm
until you confirm it.
1. Select an item.
2. Press <
Confirm
> to confirm and delete the
item.
Memory status
(Menu 3.4.9)
This menu displays the number of items of each
type you have created, and the total number of
items you can store.
Calculator
(Menu 3.5)
Use this menu to perform basic arithmetic
functions such as addition, subtraction,
multiplication, and division.
Performing a calculation
1. Enter the first number.
Press [ ] to insert a decimal point.
2. Press one of the Navigation keys to access
the math function you want.
3. Enter the second number.
4. Press [ ] to view the result.
5. If necessary, repeat from step 2 to continue
the calculation.
Using calculator options
Press <
Options
> to access the following
options:
•
Equal
: view the result.
Menu functions
56
•
Recent calculation
: display the last result
you calculated.
•
Save to memory
: save a value into the
calculator memory.
•
Recall memory
: retrieve the saved value.
•
Clear memory
: clear the saved value.
Converter
(Menu 3.6)
Use this menu for common conversions, such
as currency and temperature.
Performing a conversion
1. Select a converter.
2. Press [Left] or [Right] to select the original
unit and press [Down].
3. Enter the value to be converted and press
[Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to
above zero (+) or below zero (-).
4. Press [Left] or [Right] to select the unit to
which you want to convert.
The equivalent value for the amount you
entered displays.
Using converter options
Press <
Options
> to access the following
options:
•
Clear
: clear the current values.
•
Reverse
: reverse the conversion.
•
Currency rates
: display the currency rate
list.
World clock
(Menu 3.7)
Use this menu to set your local time zone and
find out the current time in another part of the
world.
Menu functions
Browser
(Menu 4)
57
Setting the local time zone
1. From the world map, press [Left] or [Right]
to scroll to the city you want on the upper
line ( ). As the time line moves, the time
and date of the given zone display.
2. Press [ ] to save the city as your local time
zone.
Viewing world time
1. From the world map, move to the lower line
().
2. Press [Left] or [Right] to scroll to the city
you want.
3. Press [ ] to save the time zone.
Applying Daylight Savings Time
1. From the world map, press [Left] or [Right]
to scroll to the city you want.
2. Press <
Set DST
>.
PocketNews
(Menu 3.8)
This menu is available if you use a USIM/SIM
card that supports SIM Application Toolkit
menus and provides additional services, such as
news, weather, sports, entertainment, and
location services. Available services may vary,
depending on your service provider’s plans.
For details, see your USIM/SIM card
instructions or contact your service provider.
Browser
(Menu 4)
The web browser on your phone allows you to
access the wireless web. Using the web
browser, you can access up-to-date information
and a wide variety of media contents, such as
wallpapers, ringtones, and music files.
To access this menu, press <
Menu
> in Idle
mode and select
Browser
.
Menu functions
58
BigPond Home
(Menu 4.1)
Use this menu to connect your phone to the
network and load the homepage of the wireless
web service provider. You can also press
<
BigPond
> in Idle mode.
Navigating the web browser
Using browser options
From any web page, press <
Options
> to
access the following browser options:
•
BigPond Home
: return to the homepage.
•
Enter URL
: enter a URL address manually.
•
Reload
: reload the current page with
updated information.
•
Add bookmark
: bookmark the current
page.
•
Bookmarks
: access the bookmark list.
•
History
: access the list of web pages you
have accessed.
•
Send link
: send the URL address of the
bookmark via SMS or e-mail.
•
Save
: save the image of the current web
page or the current page.
•
Advanced
: change the various settings for
the browser:
To Press
scroll through
browser items
[Up] or [Down].
select a browser item <
Select
> or [ ].
return to the previous
page
<
Back
>.
Menu functions
Browser
(Menu 4)
59
Search text
: search for text in the current
web page.
Clear history
: clear the list of web pages
you have accessed.
Clear cookies
: delete cookies. Cookies are
pieces of personal information sent to a web
server while navigating the web.
Clear cache
: clear the cache. A cache is a
temporary memory site that stores recently
accessed web pages.
Details
: access the page properties.
Browser settings
: change the settings for
the web browser to suit your preference.
Certificates
: access certificate information.
Browser profiles
: select a connection
profile to be used for connecting to the
Internet. You can also create or edit a
profile.
p. 105
About ...
: access version and copyright
information about the browser.
Exiting the web browser
Press [ ] to end the network connection and
exit the browser.
Bookmarks
(Menu 4.2)
Use this menu to save URL addresses in order
to quickly access web pages, or access the
preset bookmarks.
Adding a new bookmark
1. Press <
Options
> and select
New
.
2. Enter a title and press [Down].
3. Enter a URL address and press <
Save
>.
Using bookmark options
From the bookmark list, press <
Options
> to
access the following options:
•
Go
: access the bookmarked web page.
Menu functions
60
•
Edit
: edit the URL address and title of the
bookmark, if you selected an added one.
•
New
: add a new bookmark.
•
Send link
: send the URL address of the
bookmark via SMS.
•
Delete
: delete the selected bookmark.
Enter URL
(Menu 4.3)
Use this menu to manually enter a URL address
and access the associated web page.
Browser profiles
(Menu 4.4)
Use this menu to select a connection profile to
be used for connecting to the Internet. You can
also create or edit a profile.
p. 105
Clear cache
(Menu 4.5)
Use this menu to clear the cache. A cache is a
temporary memory site that stores recently
accessed web pages.
My Place
(Menu 5)
The
My Place
menu enables you to use various
Internet services supported by your service
provider.
To access this menu, press <
Menu
> in Idle
mode and select
My Place
.
BigPond Home
(Menu 5.1)
Use this menu to access a range of mobile
entertainment from the BigPond homepage,
only available on Telstra’s Next G network. For
further details, please refer to your Next G User
Guide.
Menu functions
My Place
(Menu 5)
61
FOXTEL
(Menu 5.2)
Use this menu to access the online TV service
supported by your service provider. You can
watch TV and use various Mobile TV services.
Using this link, you can access to watch 12
exclusive FOXTEL channels on your phone
wherever you are. For further details, please
refer to your Next G User Guide.
Search
(Menu 5.3)
Use this menu to access the Internet on your
phone and launch the Telstra search engine. For
further details, please refer to your Next G User
Guide.
Email
(Menu 5.4)
Use this menu to access the E-mail service
supported by your service provider. With your
Telstra’s Next G mobile, you can check your
BigPond, Hotmail, Yahoo! Mail and other
Internet provider e-mail accounts, wherever
you are, whenever it suits you. For further
details, please refer to your Next G User Guide.
Music
(Menu 5.5)
Use this menu to access the BigPond Music
Player and download music files. For further
details, please refer to your Next G User Guide.
Downloads
(Menu 5.6)
Use this menu to access the website preset by
your service provider and have entertainment
at your fingertips to download.
Menu functions
62
Download and watch music videos, movie
trailers, ringtones and much more with
Download Manager. For further details, please
refer to your Next G User Guide.
Photos
(Menu 5.7)
Use this menu to access the website preset by
your service provider and download pictures.
You can shoot, store, view, and share photos
with your family and friends, wherever you are,
from your mobile or PC. For further details,
please refer to your Next G User Guide.
Maps
(Menu 5.8)
Use this menu to access a location service
based on GPS positioning technology. With
access to Whereis Mobile on your phone, you
can quickly find your way to any location
around Australia. For further details, please
refer to your Next G User Guide.
My Account
(Menu 5.9)
Use this menu to manage your Telstra
Accounts. View and pay your Telstra bills,
manage your content subscriptions and more.
For further details, please refer to your Next G
User Guide.
My files
(Menu 6)
The
My files
menu allows you to access
images, videos, music files, and sounds stored
in the phone’s memory.
To access this menu, press <
Menu
> in Idle
mode and select
My files
.
Tips for Digital Rights Management
As a result of the Digital Rights Management
(DRM) system, some of the media items you
download from the Internet or receive by MMS
may require a licence key to access them.
Menu functions
My files
(Menu 6)
63
You can acquire the key from the website which
owns the rights to the content; use the
Activate key
option.
Note the following icons on the list:
• : Forwardable item with a valid key.
• : Forwardable item without a valid key.
• : Unforwardable item with a valid key.
• : Unforwardable item without a valid
key.
Your phone supports only count-based or
unlimited-access DRM files.
Images
(Menu 6.1)
Use this menu to access photos you have taken
and images you have downloaded, received in
messages, or imported from your computer.
Viewing an image
1. Scroll to an image folder.
2. Select an image.
Viewing a slide show
You can view your images as a slide show, a
sequential presentation of each image in the
current folder.
1. While viewing an image, press <
Options
>
and select
Slide show
. The slide show
begins.
2. Press <
Back
> to stop the slide show.
Using image options
While viewing a file, press <
Options
> to
access the following options:
•
Send via
: send the file via MMS or
Bluetooth.
•
Set as
: set the image as your wallpaper for
the main display or a caller ID image for a
Phonebook entry.
•
Move
: move the file to another folder.
Menu functions
64
•
Copy
: copy the file to another folder.
•
Delete
: delete the file.
•
Rename
: change the file name.
•
Real size
: view the image in its actual size.
Press <
Change
> to fit the image to the
display.
•
Slide show
: view all images as a slide
show.
•
Activate key
: get a new licence key when
the key for the selected DRM file expires.
•
Reactivate key
: get another licence key
even when the key for the selected DRM file
has not expired.
•
Bluetooth
visibility
: share the file with
other Bluetooth devices, or hide the file so
that other Bluetooth devices cannot access
it.
•
Lock
/
Unlock
: lock the file to prevent it from
being deleted, or unlock the file.
•
Properties
: access the file properties.
•
Key management
: manage the licence
keys you have acquired.
Downloading images
1. Scroll to the
Downloads
folder.
2. Select
Shop Graphics
. You are connected to
the website preset by your service provider.
3. Search for the file you want and follow the
onscreen instructions to download it.
Video
(Menu 6.2)
Use this menu to access video clips you have
recorded, downloaded, received in messages,
or imported from your computer.
Video clips recorded on other devices, such as
camcorders, may not play correctly.
Menu functions
My files
(Menu 6)
65
Playing a video clip
1. Scroll to a video folder.
2. Select a video clip. The media player opens.
p. 46
Using video options
From the video list, press <
Options
> to access
the following options:
•
Play
: play the video clip.
•
Add to play list
: add the file to the play list.
•
Send via
: send the file via MMS or
Bluetooth.
•
Move
: move the file to another folder.
•
Copy
: copy the file to another folder.
•
Delete
: delete the selected file or all files.
•
Activate key
: get a new licence key when
the key for the selected DRM file expires.
•
Reactivate key
: get another licence key
even when the key for the selected DRM file
has not expired.
•
Rename
: change the file name.
•
Create folder
: add a new folder.
•
Bluetooth
visibility
: share the file with
other Bluetooth devices, or hide the file so
that other Bluetooth devices cannot access
it.
•
Lock
/
Unlock
: lock the file to prevent it from
being deleted, or unlock the file.
•
Properties
: access the file properties.
•
Key management
: manage the licence
keys you have acquired.
Downloading video clips
1. Scroll to the
Downloads
folder.
2. Select
Shop Video
. You are connected to
the website preset by your service provider.
Menu functions
66
3. Search for the file you want and follow the
onscreen instructions to download it.
Sounds
(menu 6.3)
Use this menu to access voice memos you have
recorded, and sound clips you have
downloaded, received in messages, or imported
from your computer.
Playing a sound clip
1. Scroll to a sound folder.
2. Select a sound clip. The selected sound
plays.
For a voice memo, see
Record audio
.
p. 49
During playback, use the following keys:
Using sound options
From the sound list, press <
Options
> to
access the following options:
•
Play
: play the selected file.
•
Send via
: send the file via MMS, or
Bluetooth.
•
Set as
: set the file as your ringtone or as a
caller ID for a Phonebook entry.
•
Activate key
: get a new licence key when
the key for the selected DRM file expires.
Key Function
Left Returns to the previous file.
Right Skips to the next file.
Up/Down/
/
Adjusts the volume.
Allows you to send the selected
file to other people.
Key Function
Menu functions
My files
(Menu 6)
67
•
Reactivate key
: get another licence key
even when the key for the selected DRM file
has not expired.
•
Move
: move the file to another folder.
•
Copy
: copy the file to another folder.
•
Delete
: delete the selected file or all files.
•
Rename
: change the file name.
•
Create folder
: add a new folder.
•
Bluetooth
Visibility
: share the file with
other Bluetooth devices, or hide the file so
that other Bluetooth devices cannot access
it.
•
Lock
/
Unlock
: lock the file to prevent it from
being deleted, or unlock the file.
•
Properties
: access the file properties.
•
Key management
: manage the licence
keys you have acquired.
Downloading sound clips
1. Select
Shop Tones
. You are connected to
the preset website by your service provider.
2. Search for the file you want and follow the
onscreen instructions to download it.
Music
(Menu 6.4)
This menu displays music files you have
downloaded, received in messages, or imported
from your computer.
Playing a music file
Select a music file. The media player opens.
p. 46
Using music options
From the music list, press <
Options
> to access
the following options:
•
Play
: play the music file.
Menu functions
68
•
Add to play list
: add the file to the play list.
•
Send via
: send the file via MMS or
Bluetooth.
•
Set as
: set the file as your ringtone or as a
caller ID for a Phonebook entry.
•
Activate key
: get a new licence key when
the key for the selected DRM file expires.
•
Reactivate key
: get another licence key
even when the key for the selected DRM file
has not expired.
•
Move
: move the file to another folder.
•
Copy
: copy the file to another folder.
•
Delete
: delete the selected file or all files.
•
Rename
: change the file name.
•
Create folder
: add a new folder.
•
Bluetooth
visibility
: share the file with
other Bluetooth devices, or hide the file so
that other Bluetooth devices cannot access
it.
•
Lock
/
Unlock
: lock the file to prevent it from
being deleted, or unlock the file.
•
Properties
: access the file properties.
•
Key management
: manage the licence
keys you have acquired.
Downloading music files
1. Select
Shop Music
. You are connected to
the website preset by your service provider.
2. Search for the file you want and follow the
onscreen instructions to download it.
Games and more
(Menu 6.5)
Use this menu to access the embedded Java
games and download Java applications.
Menu functions
My files
(Menu 6)
69
Accessing an applications
Select an application from the application list
and follow the onscreen instructions. The
procedure may differ from application to
application.
Using Java application options
From the application list, press <
Options
> to
access the following options:
•
Download
: connect to the preset website
and download games or other Java
applications.
•
Launch
: launch the selected application.
•
Network settings
: select a connection
profile to be used for applications requiring
network access. You can also create or edit a
profile.
p. 105
•
Details
: access the application properties.
•
Move down
: move the game to another
folder.
•
Activate key
: get a new licence key when
the key for the selected DRM file expires.
•
Reactive key
: get another licence key even
when the key for the selected DRM file has
not expired.
•
Delete
: delete the selected application or
game folder, except for embedded games
and default game folder.
•
Rename
: change the name of the game or
game folder.
•
Lock
/
Unlock
: lock the application to
prevent it from being deleted, moved, and
renamed, or unlock the application.
•
New folder
: add a new folder.
•
Memory status
: access memory
information for each folder in
My files
.
•
Key management
: manage the licence
keys you have acquired.
Menu functions
70
Downloading new applications
1. Select
Get games
. You are connected to the
website preset by your service provider.
2. Search for the application you want and
follow the onscreen instructions to download
it.
Other files
(Menu 6.6)
Files that you have received but which are not
supported by your phone are stored in this
folder. You cannot open these files on the
phone.
Memory status
(Menu 6.7)
Use this menu to view memory information for
media items in each folder.
Camera
(Menu 7)
You can use the camera module embedded in
your phone to take photos and record videos.
To access this menu, press <
Menu
> in Idle
mode and select
Camera
, or press and hold
[].
Taking a photo
You can take photos in various modes. The
camera produces jpeg photos.
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras
are not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
When you take a photo in direct sunlight or in
bright conditions, shadows may appear on the
photo.
Menu functions
Camera
(Menu 7)
71
1. Access the
Camera
menu to turn on the
camera. You can also press and hold [ ] in
Idle mode.
2. Make any desired adjustments.
• Press < > to access camera options.
next section
• Use the keypad to change the camera
settings or switch to other modes.
p. 73
3. Press [ ] or [ ] to take a photo. The
photo is saved in the
Photos
folder.
Using camera options in Capture mode
In Capture mode, press < > to access the
following options:
•
Record video
: switch to Record mode.
•
Shooting mode
: take a photo in the
following modes:
Single shot
: take a photo in Normal mode.
You can select whether or not the camera
automatically saves a photo.
Multi shot
: take a series of action stills. You
can select the number of photos the camera
will take.
Mosaic shot
: take several stills and save
them in one frame. You can select the
layout. Press [ ] to take each photo.
4.
To Press
access photo options <
Options
>.
p. 73
delete the photo [
C
] and then <
Yes
>.
send the photo via
MMS
[].
p. 78
return to Capture
mode
<
Back
>.
4.
To Press
Menu functions
72
•
Effects
: change the colour tone of the
image.
•
Frames
: apply a decorative frame.
•
Timer
: set a time delay before the camera
takes a photo.
•
Go to Photos
: access the
Photos
folder.
•
Camera settings
: change the default
settings for taking a photo.
Function
: change the following default
camera functions:
-
Size
: select an image size.
-
Photo quality
:
select an image quality.
-
Viewfinder
:
select a preview screen.
-
Scene programs
: set whether to use
Night shot mode.
-
Metering exposure
: adjust the exposure
based on a specific area of the image.
Select
On
to display the spot focus frame
in the middle of the image, and change the
exposure according to the brightness of the
image fragment in the frame.
-
White balance
: adjust the colour
temperature of the camera. Depending on
the current lighting conditions, you can
make the video look warmer or cooler.
Setup
: change the additional settings:
-
Shutter sound
: select the sound that you
hear when you press the shutter release
key.
-
Zoom sound
: turn the sound effect for
zooming on or off.
-
Brightness sound
: turn the sound effect
for brightness adjustment on or off.
-
Default name
: change the default prefix
of file names.
•
Camera shortcuts
: view the functions of
the keys you can use in Capture mode.
Menu functions
Camera
(Menu 7)
73
Using the keypad in Capture mode
You can use the keypad to customise your
camera settings in Capture mode.
Using photo options
After saving a photo, press <
Options
> to
access the following options:
•
Viewfinder
: return to Capture mode.
•
View
: access one of the multi-shot photos.
•
Send via
/
Send
: send the file via MMS or
Bluetooth.
•
Delete
: delete the file, or all of the multi-
shot photos.
Key Function
Left/Right Adjusts the brightness.
Up/Down Zooms in or out. (Not available for
the maximum size)
Flips the image vertically.
Shows the mirror image.
1
Switches to Record mode.
p. 74
2
Changes the image size.
3
Changes the image quality.
4
Changes the shooting mode.
5
Changes the colour tone or
applies a special effect.
6
Changes the white balance.
7
Adds a decorative frame.
8
Sets the timer.
0
Goes to the
Photos
folder.
Changes the preview screen.
Key Function
Menu functions
74
•
Set as
:
set the photo as wallpaper for the
main display or as a caller ID image for a
Phonebook entry.
•
Go to Photos
: access the
Photos
folder.
p. 63
•
Rename
:
change the file name.
Recording a video
You can record a video of what is displayed on
the camera screen and save it.
Recording a video
1. Access the
Camera
menu to turn on the
camera. You can also press and hold [ ] in
Idle mode.
2. Press [
1
] to switch to Record mode.
3. Make any desired adjustments.
• Press < > to access camera options.
next section
• Use the keypad to change the camera
settings or switch to other modes.
p. 75
4. Press [ ] or [ ] to start recording.
5. Press [ ] or [ ] to stop recording. The
video is saved in the
Videos
folder.
Using camera options in Record mode
In Record mode, press < > to access the
following options:
•
Take photo
: switch to Capture mode.
•
Effects
:
change the colour tone of the
image.
6.
To Press
access video options <
Options
>.
p. 76
delete the video clip [
C
] and then <
Yes
>.
return to Record
mode
<
Back
>.
Menu functions
Camera
(Menu 7)
75
•
Timer
: set a time delay before the camera
takes a photo.
•
Go to Videos
:
access the
Videos
folder.
p. 64
•
Video settings
: change the following
settings for recording a video:
Quality
: select an image quality.
Recording time
: select a video recording
mode.
Select
Limit for
MMS
to record a video
suitable for an MMS message.
Select
Normal
to record a video within the
limit of the currently available memory. The
length of your video is determined by how
much memory has been used.
Audio record
: turn the audio on or off.
White balance
: adjust the colour
temperature of the camera. Depending on
the current lighting conditions, you can
make the video look warmer or cooler.
Zoom sound
: turn the sound effect for
zooming on or off.
Brightness sound
: turn the sound effect
for brightness adjustment on or off.
Default name
: change the default prefix of
file names.
•
Camcorder shortcuts
: view the functions
of the keys you can use in Record mode.
Using the keypad in Record mode
You can use the keypad to customise your
camera settings in Record mode.
Key Function
Left/Right Adjusts the brightness.
Up/Down Zooms in or out.
Flips the image vertically.
Shows the mirror image.
Menu functions
76
Using video options
After saving a video clip, press <
Options
> to
access the following options:
•
Play
:
play back the file.
•
Send via
:
send the file via MMS or
Bluetooth.
•
Delete
: delete the file.
•
Rename
: change the file name.
•
Go to Videos
: access the
Videos
folder.
p. 64
•
Bluetooth visibility
: share the file with
other Bluetooth devices, or hide the file so
that other Bluetooth devices cannot access
it.
•
Lock
: lock the file to prevent it from being
deleted, or unlock the file.
•
Properties
: access the file properties.
1
Switches to Capture mode.
p. 70
2
Changes the frame size.
3
Changes the image quality.
4
Changes the video recording
mode.
5
Changes the colour tone or
applies a special effect.
6
Changes the white balance.
7
Mutes or unmutes audio.
8
Sets the timer.
0
Goes to the
Videos
folder.
Key Function
Menu functions
Messages
(Menu 8)
77
Messages
(Menu 8)
Use the
Messages
menu to send and receive
text messages, multimedia messages, and
e-mails. You can also access push messages,
voicemails, broadcast messages, and
configuration messages.
To access this menu, press <
Menu
> in Idle
mode and select
Messages
.
Create new
(Menu 8.1)
Use this menu to create and send text
messages, multimedia messages, or e-mails.
SMS
(Menu 8.1.1)
Short Message Service (SMS) allows you to
send or receive text messages.
Creating and sending an SMS message
1. Enter your message and press [ ].
2. Enter a destination number.
To send the message to more than one
recipient, fill in additional destination fields.
3. Press [ ] to send the message.
Using options while composing an SMS
message
While composing a message, press <
Options
>
to access the following options:
•
Send
: send the message.
• The maximum number of characters
allowed in a message varies by service
provider. If your message exceeds the
maximum number of characters, the
phone will split the message.
• You can use various options by pressing
<
Options
>.
next section
Menu functions
78
•
Input method
: change the text input
mode.
•
Insert
: insert a text template, Contacts
entry, or bookmarked URL address.
•
Save to Drafts
: save the message in the
Drafts
folder.
MMS
(Menu 8.1.2)
Multimedia Message Service (MMS) delivers
messages containing a combination of text,
image, video, and audio, from phone to phone
or from phone to e-mail.
Creating and sending an MMS message
1. Enter the message subject.
2. Select the
Text
line.
3. Enter the message text and press [ ].
4. Select the
Picture or Video
or
Audio
line
and add an image, a video, or a sound clip.
5. When you have finished, press [ ].
6. Enter a phone number or an e-mail address.
To send the message to more than one
recipient, fill in additional destination fields.
7. Press [ ] to send the message.
Using options while composing an MMS
message
While composing a message, press <
Options
>
to access the following options:
•
Input
: enter the message text.
You can use various options by pressing
<
Options
> in each field.
next section
• The maximum size allowed for a message
can differ, depending on your service
provider.
• Depending on the file type or DRM
(Digital
Rights Management) system,
some files
may not be able to be forwarded.
Menu functions
Messages
(Menu 8)
79
•
Add file(s)
: add an image, video, or sound
clip.
•
Send
: send the message.
•
Preview
: view the message as it will be
shown on the recipient’s phone.
•
Input method
: change the text input
mode.
•
Input language
: change the language to
be used in T9 input mode.
•
Insert text template
: insert a text
template.
•
Save to Drafts
: save the message in the
Drafts
folder.
•
Add page
: add pages. Move to each page
by pressing [Left] or [Right].
•
Move page
: move the current page
backward or forward to change the page
order.
•
Delete page
: delete a page.
•
Edit style
: change the page properties.
This page
: set the page duration and
change font colour and style for the selected
page.
All page
: change the background colour and
page layout.
•
Edit
text
/
Change file
: edit the added text,
image, video, or sound clip.
•
Delete
text
/
Delete file
: delete the added
text, image, video, or sound clip.
•
Save as template
: save the message as a
template in the
MMS templates
folder.
Email
(Menu 8.1.3)
You can send and receive e-mails that include
text, audio, and images. To use this feature,
you need to subscribe to an e-mail service and
set up your e-mail account.
p. 92
Menu functions
80
Creating and sending an e-mail
1. Enter the e-mail subject.
2. Move to the
Message
field.
3. Enter the message text.
4. Move to the
Attach files
line.
5. Press <
Options
> and select
Add files
,
Add
name card
, or
Add v-calendar
.
6. Select images, videos, sounds, name cards,
or calendar data.
7. Press <
Options
> and select
Attach
.
8. When you have finished, press [ ].
9. Enter an e-mail address.
To send the e-mail to more than one
recipient, fill in additional destination fields.
10.Press [ ] to send the e-mail.
Using options while composing an e-mail
While composing an e-mail, press <
Options
>
to access the following options in each field:
•
Send
: send the message.
•
Input method
: change the text input
mode.
•
Insert text template
: insert a text
template.
•
Insert
: insert a text template, Contacts
entry, or bookmarked URL address.
•
Attached file list
: access the file list you
attached.
•
Add files
: add images, videos, or sounds.
•
Add name card
: attach a Contacts entry as
a name card.
•
Add v-calendar
: attach calendar data as a
data format attachment.
•
Delete all attachments
: delete all
attachments.
You can use various options by pressing
<
Options
> in each field.
next section
Menu functions
Messages
(Menu 8)
81
•
Save to Drafts
: save the e-mail in the
Drafts
folder.
Inbox
(Menu 8.2)
This folder stores all types of messages you
have received, except for e-mails.
Viewing a message
The following icons may appear on the list to
show the message type:
• SMS message
• MMS message
• MMS notification
• Push message from web servers
• Configuration message, containing
network parameters from your service
provider
• Broadcast message from your service
provider
• Delivery report for your sent messages
Using message options
While viewing a message, press <
Options
> to
access the following options:
SMS messages
•
Call
/
Go to URL
/
Go to RTSP
: dial the
highlighted phone number or access the
highlighted web link.
•
Add to Favorites
: save the highlighted web
link to the bookmark list.
•
Send
: send an SMS or MMS message to the
highlighted phone number or e-mail address.
•
Forward
: forward the message to other
people.
• Depending on the DRM (Digital Rights
Management) system, messages having web
content may not be able to be forwarded.
• A
!
icon next to a message means that the
message is of high priority. A grey-coloured
message icon indicates low priority.
Menu functions
82
•
Save to Contacts
: save the sender’s phone
number to Phonebook. If a phone number,
e-mail address, or URL address within the
message is selected, you can also save it to
Phonebook.
•
Move to SIM
/
Move to Phone
: move the
message between the phone’s memory and
the USIM/SIM card.
•
Delete
: delete the message.
MMS messages
•
Call
/
Go to URL
/
Go to RTSP
: dial the
highlighted phone number or access the
highlighted web link.
•
Add to Favorites
: save the highlighted web
link to the bookmark list.
•
Create email
: send an e-mail to the
highlighted e-mail address.
•
Create multimedia message
: send an
MMS message to the highlighted phone
number or e-mail address.
•
Play
:
play the sound file attached to the
message.
•
Reply
: reply to the sender via SMS or MMS.
•
Reply to all
: send a reply to the sender and
all recipients.
•
Forward
: forward the message to other
people.
•
Call back
: dial the phone number of the
sender.
•
Save as template
: save the message as a
template in the
MMS templates
folder.
•
Save files
: save media items from the
message into your phone’s memory.
•
Save to Contacts
: save the sender’s phone
number to Phonebook. If a phone number,
e-mail address, or URL address within the
message is selected, you can also save it to
Phonebook.
•
Delete
: delete the message.
•
Details
: access the message properties.
Menu functions
Messages
(Menu 8)
83
Push messages
•
Go to URL
/
Go to RTSP
: connect to the URL
specified in the message.
•
Delete
: delete the message.
Configuration messages
•
Install
: apply the configuration value in the
message to your phone.
•
Delete
: delete the message.
Delivery reports
•
Call back
: dial the phone number of the
sender.
•
Save to Contacts
: save the sender’s phone
number to Phonebook. If a phone number,
e-mail address, or URL address within the
message is selected, you can also save it to
Phonebook.
•
Delete
: delete the report.
Sent box
(Menu 8.3)
This folder stores messages that you have sent.
From the message list, press <
Options
> to
access the following options:
•
View
: open the selected message.
•
Forward
: forward the message to other
people.
•
Sort by
: change the sort order of the
message list.
•
Delete
: delete the selected message or all
messages.
•
Details
: access the message properties.
Outbox
(Menu 8.4)
This folder stores messages that the phone is
attempting to send or has failed to send.
Menu functions
84
The following icons on the message list
indicates the sending status:
• Being sent
• Failed to be sent
From the message list, press <
Options
> to
access the following options:
•
View
: open the selected MMS message.
•
Send again
: resend the message.
•
Edit
: edit the message.
•
Cancel sending
: cancel sending the
message.
•
Sort by
: change the sort order of the
message list.
•
Delete
: delete the selected message or all
messages.
•
Details
: access the MMS message
properties.
Drafts
(Menu 8.5)
This folder stores messages you have saved to
send them at a later time.
From the message list, press <
Options
> to
access the following options:
•
View
: open the selected MMS message.
•
Edit
: edit the selected message.
•
Send
: send the message.
•
Sort by
: change the sort order of the
message list.
•
Delete
: delete the selected message or all
messages.
Email inbox
(Menu 8.6)
This folder stores e-mails that you have
received.
Menu functions
Messages
(Menu 8)
85
Viewing received e-mails
1. Press <
Options
> and select
Download
.
The phone checks the e-mail server and
downloads new e-mails.
2. Select an e-mail or a header.
3. If the e-mail has more than one page, press
[ / ] to scroll through pages one by one.
4. Select an attached file to view or play it.
Using e-mail options
While viewing the e-mail or header, press
<
Options
> to access the following options:
•
Call
/
Go to URL
/
Go to RTSP
: dial the
highlighted phone number or access the
highlighted web link.
•
Add to bookmarks
: save the highlighted
web link to the bookmark list.
•
Create email
: send an e-mail to the
highlighted e-mail address.
•
Create multimedia message
: send an
MMS message to the highlighted e-mail
address.
•
View
: open the selected e-mail.
•
Retrieve
: retrieve the body of the selected
e-mail header from the e-mail server.
•
Reply
: send a reply to the sender.
•
Reply to all
: send a reply to the sender and
all recipients.
•
Forward
: forward the e-mail to other
people.
•
Download
: download new e-mails or
headers from the e-mail server.
•
Sort by
: change the sort order of the e-mail
list.
Depending on the DRM (Digital Rights
Management) system, messages having web
content may not be able to be forwarded.
Menu functions
86
•
Save files
: save the selected file.
•
Save to Contacts
: extract phone numbers
or e-mail addresses from the e-mail and
save them in Phonebook.
•
Block
:
add the sender’s e-mail address or
e-mail subject to the Block list to reject
e-mails from that address or containing that
subject.
•
Delete from phone
: delete the selected
e-mail or all e-mails from the phone’s
memory.
•
Delete permanently
: delete the selected
e-mail or all e-mails from both the phone’s
memory and the e-mail server.
•
Email accounts
: change the active e-mail
account.
•
Details
: access the e-mail properties.
Templates
(Menu 8.7)
Use this menu to create, edit, and send SMS
templates and MMS templates.
Text templates
(Menu 8.7.1)
You can create SMS templates with the
sentences you use frequently so that you can
retrieve and insert them when composing an
SMS message.
Creating a template
1. Press <
Options
> and select
New
.
2. Enter a message and press [ ].
Using template options
From the template list, press <
Options
> to
access the following options:
•
Send
:
create and send a new message using
the template via SMS, MMS, or e-mail.
•
Edit
: change the selected template.
Menu functions
Messages
(Menu 8)
87
•
New
: add a new template.
•
Delete
: delete the selected template or all
templates, except for the embedded ones.
MMS templates
(Menu 8.7.2)
You can create MMS templates so that you can
use them in composing an MMS message.
Creating a template
1. Press <
New
>, or press <
Options
> and
select
New
, if one has already been stored.
2. Create a template as you would when
creating an MMS message.
3. Press [ ] save the template.
Using template options
From the template list, press <
Options
> to
access the following options:
•
View
: open the selected template.
•
Send
:
send the selected template via MMS.
•
New
: add a new template.
•
Edit
: edit the selected template.
•
Delete
: delete the selected template or all
templates.
IM
(Menu 8.8)
Instant messaging is a way of sending short,
simple messages that are delivered
immediately to users online at that moment.
Before using this feature, you need to subscribe
to a messenger service. For further details,
contact your service provider.
Delete all
(Menu 8.9)
Use this menu to delete messages in each
message type at once.
1. Press [ ] to select the message types to be
cleared.
Menu functions
88
2. Press <
Delete
>.
3. Press <
Yes
> to confirm the deletion.
Settings
(Menu 8.10)
Use this menu to set up various options for
using messaging services.
SMS
(Menu 8.10.1)
You can configure SMS settings.
•
Settings x
: set the properties of each
profile:
Centre address
: store or change the
number of your SMS server.
Expiration
: set the length of time your
messages are stored in the SMS server.
Default type
: set the default message type.
The network can convert messages into the
selected format.
Name
: enter a profile name.
•
Sending settings
: set up the options for
sending SMS messages:
Keep a copy
: leave copies of your
messages in the
Sent box
folder after
sending.
Address book
: enter the default destination
number.
Reply path
: allow recipients to reply to you
through your SMS server.
Delivery report
: set the network to inform
you when your messages are delivered.
Network selection
: select
CS preferred
(GSM) or
PS preferred
(GPRS), depending
on your network.
Keep a copy
: leave copies of your
messages in the
Sent box
folder after
sending.
Menu functions
Messages
(Menu 8)
89
Character support
: select a character
encoding type. When you select
Automatic
,
the phone switches the encoding type from
GSM alphabet to Unicode if you enter a
unicode character. Use of Unicode encoding
will reduce the maximum number of
characters in a message to about half. If this
menu is not shown, your phone provides the
automatic character encoding by default.
MMS
(Menu 8.10.2)
You can configure MMS settings.
•
Sending options
: set up the options for
sending MMS messages:
Priority
: set the priority level of messages.
Expiration
: set the length of time messages
are stored in the MMS server.
Custom time(Hour)
: enter the length of
time you want if you select
Custom time
in
the
Expiration
option.
Delivery
: set a time delay before messages
are sent.
Custom time(Hour)
: enter the length of
time you want if you select
Custom time
in
the
Delivery
option.
Request delivery report
: set the network
to inform you when your messages have
been delivered.
Request read report
: send a read-replay
request along with your messages.
Keep a copy
: leave copies of your
messages in the
Sent box
folder after
sending.
Add signature
: allow your signature to be
attached to your message via File
messenger.
Input signature
: enter your signature.
Message size
: select a maximum size
allowed for messages. Available message
size may vary, depending on your country.
Menu functions
90
•
Receiving options
: set up the options for
receiving MMS messages:
Max
: determine if your phone retrieves new
messages automatically when you are in
your home service area roaming in another
network.
Reception within your home network or while
roaming has the following options:
-
Auto download
: the phone automatically
retrieves messages from the server.
-
Manual
: the phone receives notifications
first from the server. Use the
Retrieve
option to manually retrieve new messages.
Send delivery report
: set the network to
inform the sender when a message has been
delivered to you.
Send read report
: determine whether or
not the phone sends a read-reply when an
incoming message has been read.
Reject anonymous
: reject messages from
unknown senders.
Reject advertisement
: reject
advertisements.
•
MMS profiles
: select a connection profile to
be used for MMS. You can also create or edit
a profile.
p. 105
•
Creation mode
: select an MMS creation
mode:
Warning
: you can create a message with
any type of content and of any size, but the
phone will inform you when the content and
size exceed the maximum.
Free
: you can create a message with any
type of content and of any size.
Invalid page duration
: you can create a
message with any type of contents and size.
•
Slide interval
: select the length of time the
display shows each page in a message.
Menu functions
Messages
(Menu 8)
91
Email
(Menu 8.10.3)
You can configure e-mail settings.
•
Sending options
: set up the options for
sending e-mails:
From
: set the sender name.
Sending account
: select the default
account.
Priority
: select the priority level of e-mails.
Keep a copy
: leave copies of your e-mails
in the
Sent box
folder after sending.
Include body when replying
: set whether
or not the phone includes the original e-mail
text in a reply.
Delivery report
: set the network to inform
you when your e-mails are delivered.
Add my name card
: allow your contact
information to be attached to e-mails.
Add signature
: attach your signature to
e-mails.
Input signature
: enter your signature.
•
Receiving options
: set up the options for
receiving e-mails:
Set download limit
: determine the
maximum size for incoming e-mails. Your
phone will reject e-mails that exceed the
specified size.
Auto polling
: set the phone to
automatically check the e-mail server to
download e-mails at the specified intervals.
Polling frequency
: set how often the
phone checks the e-mail server for
automatic polling.
Block address
: specify e-mail addresses to
reject e-mails from those addresses, and
activate or deactivate mail blocking.
You cannot change e-mail profile settings while
an e-mail is being sent or retrieved.
Menu functions
92
Block subject
: specify subjects to reject
e-mails which contain those subjects you
specify, and activate or deactivate mail
blocking.
•
Email profiles
: select a network connection
profile to be used for e-mail services. You
can also create or edit a profile.
p. 105
•
Email accounts
: set up an e-mail account
and select an account to be used. Press
<
Options
> and select
Edit
to access the
following options for setting up an account:
Account name
: enter a name for the
currently selected account.
SMTP server
: enter the IP address or host
name of the outgoing e-mail server.
SMTP port
: enter the SMTP port number.
Use SSL
: activate the use of the SSL
(Secure Sockets Layer) protocol.
Retrieving server type
: select the protocol
for the incoming e-mail server. The
remaining options depend on the protocol
type setting.
POP3 server
/
IMAP4 server
: enter the IP
address or host name of the POP3 or IMAP4
server.
POP3 port
/
IMAP4 port
: enter the POP3 or
IMAP4 port number.
Use SSL
: activate the use of the SSL
(Secure Sockets Layer) protocol.
IMAP4 retrieving option
: (IMAP4 protocol
only): set whether the phone retrieves only
new messages or all messages.
Retrieving option
: set wether the phone
downloads e-mail headers only or the
complete e-mail.
Keep in server
: leave the copies of e-mails
on the e-mail server after retrieving.
My address
: set your e-mail address.
Menu functions
Settings
(Menu 9)
93
User name
: enter the POP3 or IMAP4 user
name.
Password
: enter the POP3 or IMAP4
password.
Use SMTP authentication
: enable SMTP
authentication, which requires the user to
log in before sending e-mails.
Same as POP3/IMAP4
: select if you want
the SMTP server to have the same
parameters as the POP3 or IMAP4 server.
User name
: enter the SMTP user name.
Password
: enter the SMTP password.
Voice mail
(Menu 8.10.4)
Use this menu to set the number of your
voicemail server.
Push message
(Menu 8.10.5)
You can select whether or not the phone
receives push messages from the wireless web
server.
Memory status
(Menu 8.11)
Use this menu to view the number of messages
or the amount of memory currently in use for
each message type in each folder.
Settings
(Menu 9)
The
Settings
menu provides you with various
setting options to customise the phone to your
preferences and needs. You can also reset the
settings to their default status.
To access this menu, press <
Menu
> in Idle
mode and select
Settings
.
You must store the voicemail server number
before accessing the server. Your service
provider can give you the number.
Menu functions
94
Profiles
(Menu 9.1)
Your phone provides you with sound profiles
that allow you to quickly and easily change the
sound settings of the phone for different events
or situations. Use this menu to adjust the
properties of each profile and activate the
profile you need.
Editing a profile
1. Scroll to the profile you want.
2. Press <
Options
> and select
Edit
.
3. Change the sound settings:
•
Call alert type
: select an alert type for
the call ringer.
•
Voice call ringtone
: select a ringtone
for voice calls.
•
Ring tone volume
: adjust the volume
for the call ringer.
•
Message alert type
: select an alert type
for the message ringer.
•
Message alert tone
: select a ringtone
for the message ringer.
•
Message alert repetition
: select if the
phone repeatedly reminds you of a new
message.
•
Phone sounds
: turn the various sounds
on the phone on or off:
All on
: enable all tones.
Popup box alerts
: set the phone to beep
when a pop-up window displays.
Minute minder
: set the phone to beep
every minute during an outgoing call to
keep you informed of the length of your
call.
Call connect tone
: set the phone to
beep when an outgoing call is connected
to the system.
Call end tone
: set the phone to beep
when a call is disconnected by the other
person or due to a faded signal.
Menu functions
Settings
(Menu 9)
95
Power on/off
: set the phone to beep
when you turn it on or off.
Folder open/close
: set the phone to
sound when you open or close it.
Alerts on call
: set the phone to beep
when you receive a new message or when
the time for an alarm comes during a call.
•
Keypad tones
: select a tone which
sounds when you press a key.
•
Keypad tone volume
: adjust the
volume of the key tones.
•
Call answer mode
: (for Car) select how
to answer an incoming call.
4. When you have finished, press <
Options
>
and select
Save
.
Changing an active profile
From the profile list, select the profile you want.
Display settings
(Menu 9.2)
Use this menu to change settings for the display
and light.
Main display
(Menu 9.2.1)
Use this menu to change settings for the main
display.
•
Wallpaper
: change the background image
that is displayed on the main display.
•
Greeting message
: enter the greeting to
be displayed on the main display.
•
Menu style
: select a display style for the
main menu screen.
•
Dialing display
: customise the settings for
numbers entered and the background colour
of the display while dialling.
Front display
(Menu 9.2.2)
Use this menu to select an image or enter text
to be displayed on the external display.
Menu functions
96
•
Wallpaper
: press <
Change
> and select an
image.
•
Greeting message
: enter the text you
want.
Light settings
(Menu 9.2.3)
Use this menu to change settings for light.
•
Brightness
: adjust the brightness of the
main display.
•
Backlight time
: select the length of time
the backlight or display stays on when the
phone is not used.
On
: select the length of time the backlight
stays on.
Dim
: select the length of time the display
stays on in Dim mode after the backlight
turns off. After a specified time, the display
turns off.
•
Front LCD contrast
: you can adjust the
contrast of the external display.
Time & date
(Menu 9.3)
Use this menu to change the time and date
displayed on your phone. Before setting the
time and date, specify your time zone in the
World clock
menu.
p. 56
•
Time set mode
: select a mode for updating
the current time and date:
Manual only
: you can set the time and date
manually.
Automatic
: your phone will receive time
information from the network.
Prompt first
: your phone will read the MCC
(Mobile Country Code) from the network and
automatically update the current time for the
country that you are in when you travel
abroad.
Before updating, the phone asks you to
update the current time and date. Before
updating, the phone will ask you if you want
to update time information.
Menu functions
Settings
(Menu 9)
97
•
Home zone
: select your home time zone.
You can view the time difference between
your home time zone Green witch Mean
Time (GMT).
•
Time
: enter the current time. To select AM
or PM for 12-hour time format, press
[Right].
•
Date
:
enter the current date.
•
Time format
: select a time format.
•
Date format
:
select a date format.
Phone settings
(Menu 9.4)
Many different features of your phone’s system
can be customised to suit your preferences.
Shortcuts
(Menu 9.4.1)
You can use the Navigation keys as shortcut
keys to access specific menus directly from Idle
mode. Use this menu to assign a shortcut to a
key.
Assigning a shortcut menu
1. Select a key to be used as a shortcut key.
2. Select a menu to be assigned to the key.
Using shortcut options
On the Shortcuts screen, press <
Options
> to
access the following options:
•
Assign
: assign a shortcut menu.
•
Change
: change a shortcut menu
assignment.
•
Remove
: deactivate the shortcut
assignment to the selected key.
•
Remove all
: deactivate all shortcut
assignments.
Time information may not be updated when
you move to one time zone to another within
a country.
Menu functions
98
Key management
(Menu 9.4.2)
Use this menu to manage the licence keys you
have acquired to activate media contents locked
by DRM systems.
Press <
Options
> to access the following
options:
•
View
: open the corresponding media item.
•
Delete
: delete the selected licence key.
•
Go to My Messages
: access the message
that contains the media content.
•
Go to File manager
: access the
corresponding file folder.
•
Details
: access the properties of the licence
key.
Call settings
(Menu 9.5)
Use this menu to set options for call functions.
All calls
(Menu 9.5.1)
Use this menu to change the default settings for
voice calls and data calls.
Show my number
This network service allows you to hide your
phone number from the person you are calling.
If you select
By network
, the phone will use
the default setting provided by the network.
Answering mode
Use this menu to set how to answer an
incoming call.
•
Normal
: set whether a call is answered
when you press <
Accept
> or [ ]
.
•
Any key
: set whether a call is answered
when you press any key, except for
<
Reject
> and [ ]
.
Some networks do not allow the user to change
this setting.
Menu functions
Settings
(Menu 9)
99
•
Active folder
: set whether a call is
automatically answered when you open your
phone.
Show caller information
Use this menu to set the phone to display
missed call notifications with the most recently
missed caller’s information. To set the external
display to show caller information, select
With
front LCD
.
Voice call
(Menu 9.5.2)
Use this menu to access network services for
voice calls.
Forwarding
This network service reroutes incoming calls to
a different phone number that you specify.
1. Select the type of calls to be diverted.
2. Select a call diverting option:
•
Always
: divert all calls.
•
Busy
: divert calls when you are on
another call.
•
No
reply
: divert calls when you do not
answer the phone.
•
Unreachable
: divert calls when you are
not in your service area or when your
phone is switched off.
•
Cancel
all
: cancel all call diverting
options.
3. Enter the number to which the calls will be
diverted in the
Forward to
line.
4. If you selected
No reply
, move to the
Waiting time
line and select the length of
time the network delays before diverting a
call.
5. Press <
Options
> and select
Activate
. To
deactivate the call diverting, select
Deactivate
.
Menu functions
100
Barring
This network service allows you to restrict your
calls.
1. Select the type of calls to be barred.
2. Select a call barring option:
•
All
outgoing calls
: prohibit all outgoing
calls.
•
Outgoing int’l calls
: prohibit
international calls.
•
Int’l calls exc. home
: only allow calls to
numbers within the current country, and
to your home country when you are
abroad.
•
All
incoming calls
: prohibit all incoming
calls.
•
Incoming calls when roaming
:
prohibit incoming calls when you use your
phone outside of your service area.
•
Cancel
all
: cancel all call barring
settings, allowing calls to be sent and
received normally.
3. Enter the call barring password supplied by
your service provider.
4. Press <
Options
> and select
Activate
. To
deactivate the call barring, select
Deactivate
.
Waiting
This network service informs you when
someone is calling you while you are on another
call.
1. Select the type of calls to which the call
waiting option will apply.
2. Press <
Options
> and select
Activate
. To
deactivate the call waiting, select
Deactivate
.
You can change the call barring password
obtained from your service provider. From the
call type list, press <
Options
> and select
Change password
.
Menu functions
Settings
(Menu 9)
101
Auto redial
Use this menu to make up to ten attempts to
redial a phone number after an unsuccessful
call.
Data call
(Menu 9.5.3)
Use this menu to change the default settings for
using the data call feature.
•
Forwarding
: reroute incoming data calls to
a different phone number that you specify.
p. 99
•
Barring
: restrict data calls.
p. 100
•
Waiting
: set the network to inform you
when someone is calling you while on
another call.
p. 100
Connectivity
(Menu 9.6)
Use this menu to set options for connection
available on your phone.
Bluetooth
(Menu 9.6.1)
Using Bluetooth wireless, you can connect the
phone wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or
control the phone remotely.
Bluetooth technology allows free wireless
connections between all Bluetooth-compliant
devices within a range of 10 metres. Since the
devices communicate using radio waves, they
do not need to be in line of sight to each other.
• If there are obstacles between the devices,
the
operating distance may be reduced.
• It is recommended that you do not use the
Bluetooth feature while using multimedia
features, such as voice recorder, camera,
and
media player, or vice versa, for the better
performance.
• Some devices, especially those that are not
tested or approved by Bluetooth SIG, may be
incompatible with your phone.
Menu functions
102
Setting up the Bluetooth feature
The
Bluetooth
menu provides the following
options:
•
Activation
: activate or deactivate the
Bluetooth feature.
•
My devices
:
search for connectable
Bluetooth devices.
•
My phone’s visibility
: allow other
Bluetooth devices to locate to your phone, or
not.
•
My phone’s name
: assign a Bluetooth
device name to your phone, which is then
displayed on other devices.
•
Secure mode
: determine if the phone asks
for your confirmation when other devices
access your data.
•
Bluetooth service
: display available
Bluetooth services.
Searching for and pairing with a Bluetooth
device
1. From the
Bluetooth
menu, select
My
devices
.
2. Select
Search new device
.
After searching, a list of devices to which you
can connect displays. The following icons
indicate the type of device:
• Headset
• Hands-free car kit
• Mobile phone
• Computer
• PDA
• Unknown device
• Printer
The colour of the icon indicates the status of
the device:
• Grey for unpaired devices
• Blue for paired devices
Menu functions
Settings
(Menu 9)
103
• Red for devices that are currently
connected to your phone
3. Select a device.
4. Enter a Bluetooth PIN and press <
OK
>. This
code is used just once and you do not need
to memorise it.
When the owner of the other device enters
the same code, pairing is complete.
Using device options
From the device list, press <
Options
> to
access the following options:
•
Connect
: connect to a headset or hands-
free car kit.
•
Disconnect
: end the connection with the
connected device.
•
Browse device
: search for data from the
device and import data directly to your
phone.
•
Authorize device
/
Unauthorize device
:
determine whether or not the phone asks
you to permit connection when other devices
try to connect to your phone.
•
Delete
: remove the selected device or all
devices from the list.
•
Rename
: rename the selected device.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item you
want to send is stored.
3. Scroll to the item you want and press
<
Options
>.
4. Select
Send business card
/
Send via
/
Send
schedule
/
Send task
→
Bluetooth
or
Via
bluetooth
.
Some devices, especially headsets or hands-free
car kits, may have a fixed Bluetooth PIN, such as
0000
. If the other device has one, you must
enter the code.
Menu functions
104
5. Select
Search new device
.
The phone searches for devices within range
and displays a list of available devices.
6. Select a device.
7. If necessary, enter the Bluetooth PIN needed
for pairing and press <
OK
>.
Receiving data via Bluetooth
To receive data via Bluetooth, your phone’s
Bluetooth feature must be active and its
visibility must be enabled.
1. If an unauthorised Bluetooth device sends
data to your phone, press <
Yes
> to allow
the device to access your phone.
2. Press <
Yes
> to receive data.
Network
(Menu 9.6.2)
Use this menu to change the settings for
connecting to your cellular network.
•
Network selection
: select to either
manually select the network to be used while
roaming outside of your home area, or to let
the network be chosen automatically. You
can select a network other than your home
network only if there is a valid roaming
agreement between the two.
•
Network mode
: select the network you
use:
Automatic
: the phone scans for available
networks.
GSM 1900
: the phone operates in the GSM
1900 network.
GSM 900
: the phone operates in the GSM
900 network.
GSM 1800
: the phone operates in the GSM
1800 network.
Menu functions
Settings
(Menu 9)
105
UMTS 850
: the phone operates in UMTS
(3G network) networks. You can get a higher
speed quality than on lower generation
networks, and use advanced data and
information services, such as video calls.
Connections
(Menu 9.6.3)
Use this menu to create and customise the
profiles containing the settings for connecting
your phone to the network. You need these
settings to use the web browser or send MMS
messages or e-mails.
Creating a profile
1. Press <
Options
> and select
New
.
2. Specify profile parameters:
•
Set name
: enter a profile name.
•
Access name
: edit the access point
name used for the address of the GPRS
network gateway.
•
Auth type
: choose the type of
authentication used.
•
User ID
: enter the user ID.
•
Password
: enter the user password.
•
Protocol
: select the protocol from
between
HTTP
and
Other
.
•
Home URL
: (HTTP only) enter the URL
address of the page to be used as your
homepage.
•
Proxy address
/
Port
: (HTTP only) set
the proxy server address and port.
•
Linger time (sec.)
: (HTTP only) set a
time period after which the network is
disconnected if there has been no new
data traffic in that time.
Your phone is set up by default for connecting to
the network. If you change the settings without
first checking with your service provider, the web
browser, MMS, and e-mail features may not work
properly.
Menu functions
106
•
Advanced settings
:
provide you with
the following options:
Static IP
: specify if you want to manually
enter an IP address; see the
Local
phone IP
option. If you want the IP
address to be automatically assigned by
the server, remove the check mark.
Local phone IP
: enter the IP address
obtained from the network operator, if
you checked the
Static IP
option.
Static DNS
: specify if you want to
manually enter the Domain Name Server
(DNS) address; see the
Server 1
/
Server
2
option.
If you want the address to be
automatically assigned by the server,
remove the check mark.
Server 1
/
Server 2
: enter the Domain
Name Server (DNS) addresses.
Traffic class
: select the traffic class.
3. Press <
Save
> to save the profile.
Using profile options
From the profile list, press <
Options
> to
access the following options:
•
View
: view the properties of the selected
profile.
•
Edit
: edit the selected profile.
•
New
: add a new profile.
•
Rename
: change the profile name.
•
Delete
: delete the profile.
•
Restore
: restore the changed settings to
the default status.
You cannot edit or delete the default connection
profiles.
Menu functions
Settings
(Menu 9)
107
Application settings
(Menu 9.7)
You can customise the settings for using
applications available on the phone.
Messaging settings
(Menu 9.7.1)
Use this menu to change the default settings for
using the messaging services.
p. 88
Browser settings
(Menu 9.7.2)
Use this menu to select a connection profile to
be used for accessing the Internet. You can also
create or edit a profile.
p. 105
Camera settings
(Menu 9.7.3)
Use this menu to change the default settings for
taking photos.
p. 72
Camcorder settings
(Menu 9.7.4)
Use this menu to change the default settings for
recording videos.
p. 75
Media player settings
(Menu 9.7.5)
Use this menu to change the default settings for
playing media files in the media player.
p. 47
VOD settings
(Menu 9.7.6)
Use this menu to activate a connection profile
to be used for accessing streaming servers to
use VOD (Video on Demand) services. You can
also create or edit a profile.
p. 105
Record settings
(Menu 9.7.7)
Use this menu to change the default settings for
the voice recorder.
p. 50
Address book settings
(Menu 9.7.8)
Use this menu to change the settings for using
Phonebook.
p. 45
Menu functions
108
Security
(Menu 9.8)
Use this menu to protect the phone against
unauthorised use by managing the several
access codes of your phone and USIM/SIM
card.
Phone lock
(Menu 9.8.1)
Use this menu to protect the phone from
unauthorised use. When this feature is enabled,
you must enter a 4- to 8-digit phone password
each time the phone is switched on.
The password is preset to
00000000
. To
change the password, use the
Change phone
password
menu.
SIM lock
(Menu 9.8.2)
This menu allows your phone to work only with
the current USIM/SIM by assigning a USIM/SIM
lock code. You must enter the USIM/SIM lock
code to use a different USIM/SIM card.
PIN lock
(Menu 9.8.3)
The 4- to 8-digit PIN (Personal Identification
Number) protects your USIM/SIM card against
unauthorised use. When this feature is enabled,
the phone requires your PIN each time it is
switched on.
Lock applications
(Menu 9.8.4)
Use this menu to lock access to call logs,
Phonebook entries, messages, or media files.
When a privacy option is enabled, you must
enter the phone password to access the locked
items.
If you enter an incorrect PIN/PIN2 three times,
the USIM/SIM card is blocked. To unblock it, you
need to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are supplied by your
network operator.
Menu functions
Settings
(Menu 9)
109
FDN mode
(Menu 9.8.5)
If supported by your USIM/SIM card, Fixed
Dialling Number (FDN) mode restricts your
outgoing calls to a limited set of phone
numbers. When this feature is enabled, you can
make calls only to phone numbers stored on the
USIM/SIM card.
Change phone password
(Menu 9.8.6)
Use this menu to change your phone password.
Change PIN code
(Menu 9.8.7)
Use this menu to change your PIN. The PIN
Lock feature must be enabled to change the
PIN.
Change PIN2 code
(Menu 9.8.8)
If supported by your USIM/SIM card, use this
menu to change your current PIN2.
Reset settings
(Menu 9.9)
Use this menu to reset the phone’s settings you
have changed and clear all data you have
added.
1. Enter the phone password and press
<
Confirm
>.
2. Press <
Yes
>. The phone automatically turns
itself off and then back on.
Memory status
(Menu 9.10)
Use this menu to check the amount of memory
being used for storing data, such as messages,
media, calendar data, or Phonebook entries.
The password is preset to
00000000
.
You can change this password.
p. 109
18
Solve problems
Solve problems
Help and personal needs
To save the time and expense of an unnecessary service
call, perform the simple checks in this section before
contacting a service professional.
When you switch on your phone, the following
messages may appear:
“Insert SIM”
• Be sure that the SIM card is correctly installed.
“Phone lock”
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
“Enter PIN”
• You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the
PIN check
menu.
“Enter PUK”
• The PIN code has been entered incorrectly three
times in succession, and the phone is now blocked.
Enter the PUK supplied by your service provider.
“No service,” “Network failure,” or “Not done”
displays
• The network connection has been lost. You may be
in a weak signal area. Move and try again.
• You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
You have entered a number but it was not dialled
• Be sure that you have pressed [ ].
• Be sure that you have accessed the right cellular
network.
• Be sure that you have not set an outgoing call
barring option.
Your correspondent cannot reach you
• Be sure that your phone is switched on. ([ ]
pressed for more than one second.)
Solve problems
19
• Be sure that you are accessing the correct cellular
network.
• Be sure that you have not set an incoming call
barring option.
Your correspondent cannot hear you speaking
• Be sure that you have switched on the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is located
at the bottom of the phone.
The phone starts beeping and “Battery low”
flashes on the display
• Your battery is insufficiently charged. Recharge the
battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display
( ). The number of bars indicates the signal
strength from strong ( ) to weak ( ).
• Try moving the phone slightly or moving closer to a
window if you are in a building.
No number is dialled when you re-call a
Phonebook entry
• Use the Contact list feature to ensure the number
has been stored correctly.
• Re-store the number, if necessary.
The battery doesn’t charge properly or the phone
sometimes turns itself off
• Wipe the charging contacts both on the phone and
on the battery with a clean soft cloth.
If the above guidelines do not help you to solve
the problem, take note of:
• The model and serial numbers of your phone
•Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
20
Health and safety information
Health and safety information
Exposure to radio frequency
(RF) signals
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission (FCC) of the
U.S. Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on the
safety standards that were developed by independent
scientific organizations through periodic and through
evaluation of scientific studies.
The standards include a substantial safety margin
designed to assure the safety of all persons, regardless of
age and health.
The exposure standard for wireless phones employs a unit
of measurement known as Specific Absorption Rate (SAR).
The SAR limit set by the FCC is 1.6W/kg
*
.
SAR tests are conducted using standard operating
positions specified by the FCC with the phone transmitting
at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone
while operating can be well below the maximum value.
This is because the phone is designed to operate at
multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output
of the phone. Before a new model phone is available for
sale to the public, it must be tested and certified to the
FCC that it does not exceed the limit established by the
government-adopted requirement for safe exposure. The
tests are performed in positions and locations (e.g., at the
ear and worn on the body) as required by the FCC for each
model. While there may be differences between the SAR
* In the U.S. and Canada, the SAR limit for mobile phones used by
the public is 1.6 watts/kg (W/kg) averaged over one gram of
tissue. The standard incorporates a substantial margin of safety
to give additional protection for the public and to account for any
variations in measurements.
Health and safety information
21
levels of various phones and at various positions, they all
meet the government requirement.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of http:/
/www.fcc.gov/oet/fccid after searching on FCC ID printed
in the label on the phone.
For body operation
For body worn operation, this model phone has been
tested and meets the FCC RF exposure guidelines when
used with a Samsung-supplied or approved accessory
designated for this product or when used with and
accessory that contains no metal and that positions the
handset a minimum from the body.
The minimum distance for this model phone is written in
the FCC certification information from the body. None
compliance with the above conditions may violate FCC RF
exposure guidelines.
For more Information concerning exposure to radio
frequency signals, see the following websites:
Federal Communications Commission (FCC)
http://www.fcc.gov
Cellular Telecommunications Industry Association (CTIA):
http://www.ctia.org
U.S.Food and Drug Administration (FDA)
http://www.fda.gov/cdrh/consumer
World Health Organization (WHO)
http://www.who.int/peh-emf/en
Precautions when using batteries
• Never use any charger or battery that is damaged in
any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base station,
it uses less power; talk and standby time are greatly
affected by the signal strength on the cellular network
and the parameters set by the network operator.
• Battery charging time depends on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
22
Health and safety information
hundreds of times, but it will gradually wear out. When
the operation time (talk time and standby time) is
noticeably shorter than normal, it is time to buy a new
battery.
• If left unused, a fully charged battery will discharge
itself over time.
• Use only Samsung-approved batteries and recharge
your battery only with Samsung-approved chargers.
When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to a
charger for more than a week, since overcharging may
shorten its life.
• Extreme temperatures will affect the charging capacity
of your battery: it may require cooling or warming
first.
• Do not leave the battery in hot or cold places, such as
in a car in summer or winter conditions, as you will
reduce the capacity and lifetime of the battery. Always
try to keep the battery at room temperature. A phone
with a hot or cold battery may temporarily not work,
even when the battery is fully charged. Li-ion batteries
are particularly affected by temperatures below 0° C
(32° F).
• Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin, clip
or pen) causes a direct connection between the + and
-. terminals of the battery (metal strips on the
battery), for example when you carry a spare battery
in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-
circuiting.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
Road safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a car,
practice good common sense and remember the following
tips.
1. Get to know your wireless phone and its features, such
as speed dial and redial. If available, these features
Health and safety information
23
help you to place your call without taking your
attention off the road.
2. When available, use a hands-free device. If possible,
add an extra layer of convenience and safety to your
wireless phone with one of the many hands-free
accessories available today.
3. Position your wireless phone within easy reach. Be
able to access your wireless phone without removing
your eyes from the road. If you get an incoming call at
an inconvenient time, let your voicemail answer it for
you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic
or hazardous weather conditions. Rain, sleet, snow, ice
and even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while
driving. Jotting down a To Do list or flipping through
your phonebook takes your attention away from your
primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be
stationary. If you need to make a call while moving,
dial only a few numbers, check the road and your
mirrors, then continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Make the people with whom
you are talking aware that you are driving and
suspend conversations that have the potential to
divert your attention from the road.
8. Use your wireless phone to call for help. Dial the
emergency number in the case of fire, traffic accident
or medical emergencies. Remember, it is a free call on
your wireless phone!
9. Use your wireless phone to help others in
emergencies. If you see a car accident, crime in
progress or other serious emergency where lives are
in danger, call the emergency number, as you would
want others to do for you.
10. Call roadside assistance or a special nonemergency
wireless assistance number when necessary. If you
see a broken-down vehicle posing no serious hazard, a
broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be
stolen, call roadside assistance or any other special
nonemergency wireless number.
24
Health and safety information
Operating environment
Remember to follow any special regulations in force in any
area and always switch off your phone whenever it is
forbidden to use it, or when it may cause interference or
danger.
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users
are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is
recommended that the equipment should only be used in
the normal operating position (held to your ear with the
antenna pointing over your shoulder).
Electronic devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations
are consistent with the independent research and
recommendations of Wireless Technology Research.
Persons with pacemakers:
• Should always keep the phone more than 15 cm (6
inches) from their pacemaker when the phone is
switched on
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimize potential interference
If you have any reason to suspect that interference is
taking place, switch off your phone immediately.
Hearing aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives. Other Medical Devices If you use any other
Health and safety information
25
personal medical devices, consult the manufacturer of
your device to determine if it is adequately shielded from
external RF energy. Your physician may be able to assist
you in obtaining this information. Switch off your phone in
health care facilities when any regulations posted in these
areas instruct you to do so. Hospitals or health care
facilities may be using equipment that could be sensitive
to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its
representative regarding your vehicle. You should also
consult the manufacturer of any equipment that has been
added to your vehicle.
Posted facilities
Switch off your phone in any facility where posted notices
require you to do so.
Potentially explosive environments
Switch off your phone when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death. Users are advised
to switch off the phone while at a refueling point (service
station).
Users are reminded of the need to observe restrictions on
the use of radio equipment in fuel depots (fuel storage and
distribution areas), chemical plants or where blasting
operations are in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include below deck on
boats, chemical transfer or storage facilities, vehicles
using liquefied petroleum gas (such as propane or
butane), areas where the air contains chemicals or
particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
26
Health and safety information
Emergency calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks, as well as user-
programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must
be switched on and in a service area with adequate signal
strength. Emergency calls may not be possible on all
wireless phone networks or when certain network services
and/or phone features are in use. Check with local service
providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 112 or any other official
emergency number). Emergency numbers vary by
location.
3. Press [ ].
If certain features are in use (call barring, for example),
you may first need to deactivate those features before you
can make an emergency call. Consult this document and
your local cellular service provider.
When making an emergency call, remember to give all the
necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not end the
call until given permission to do so.
FCC Notice and Cautions
FCC Notice
• The device complies with Part 15 of the FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
• This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation.
Health and safety information
27
The phone may cause TV or radio interference if used in
close proximity to receiving equipment. The FCC can
require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection
Standard (NFPA-58). For a copy of this standard, contact
the National Fire Protection Association, One Battery
march Park, Quincy, MA 02269, Attn: Publication Sales
Division.
Cautions
Changes or modifications made in the radio phone, not
expressly approved by Samsung, will void the user’s
authority to operate the equipment.
Only use approved batteries, antennas and chargers. The
use of any unauthorized accessories may be dangerous
and void the phone warranty if said accessories cause
damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece
of equipment and can be broken. Avoid dropping, hitting,
bending or sitting on it.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no guarantee
that interference will occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
- Reorient or relocate the receiveing antenna.
- Increase the separation between the equipment
and receiver.
- Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.
28
Health and safety information
Other important safety information
• Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
• Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the
phone, its parts, or accessories.
• For vehicles equipped with an air bag, remember that
an air bag inflates with great force. Do not place
objects, including both installed or portable wireless
equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is
improperly installed and the air bag inflates, serious
injury could result.
• Switch off your phone before boarding an aircraft. The
use of wireless phones in aircraft may be dangerous to
the operation of the aircraft, and is illegal.
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
Care and maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years.
• Keep your phone and all its parts and accessories out
of the reach of small children and pets. They may
accidentally damage these things or choke on small
parts.
• Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that will corrode electronic
circuits.
• Do not use the phone with a wet hand. Doing so may
cause an electric shock to you or damage to the
phone.
• Do not use or store the phone in dusty, dirty areas, as
its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
Health and safety information
29
• Do not store the phone in cold areas. When the phone
warms up to its normal operating temperature,
moisture can form inside the phone, which may
damage the phone’s electronic circuit boards.
• Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it with a
soft cloth slightly dampened in a mild soap-and-water
solution.
• Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
• Do not put the phone in or on heating devices, such as
a microwave oven, a stove, or a radiator. The phone
may explode when overheated.
• When the phone or battery gets wet, the label
indicating water damage inside the phone changes
colour. In this case, phone repairs are no longer
guaranteed by the manufacturer's warranty, even if
the warranty for your phone has not expired.
• If your phone has a flash or light, do not use it too
close to the eyes of people or animals. This may cause
damage to their eyes.
• Use only the supplied or an approved replacement
antenna. Unauthorized antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger, or any accessory is not
working properly, take it to your nearest qualified
service facility. The personnel there will assist you, and
if necessary, arrange for service.
Acknowledging special precautions and the
FCC and Industry Canada Notice
Cautions
Modifications not expressly approved by the party
responsible for compliance could void the user's authority
to operate the equipment.
FCC compliance information
This device complies with Part 15 of FCC Rules. Operation
is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
30
Health and safety information
Information to user
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV
technician for help.
Appendix A: CERTIFICATION
INFORMATION (SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S.
Government. These limits are
part of comprehensive
guidelines and establish permitted levels of RF energy
for the general population. The guidelines are based on
safety standards that were developed by independent
scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a
substantial safety margin designed to assure the safety
of all persons, regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR limit set by the FCC is 1.6
W/kg. SAR Tests are conducted using standard operating
positions accepted by the FCC with the phone transmitting
at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest
Health and safety information
31
certified power level, the actual SAR level of the phone
while operating can be well below the maximum value.
This is because the phone is designed to operate at
multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power
output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the limit established by the government
adopted requirement for safe exposure. The tests are
performed in positions and locations(e.g., at the ear and
worn on the body) as required by the FCC for each model.
The highest reported SAR values for GSM are:
Part24 - Head: 1.29 W/kg, Body-worn: 0.265 W/kg
The highest reported SAR values for WCDMA are:
Part22 - Head: 1.24 W/kg, Body-worn: 0.540 W/kg
Body-worn operations are restricted to Sam sung
supplied, approved or none Samsung designated
accessories that have no metal and must provide at least
1.5 cm separation between the device, including its
antenna whether extended or retracted, and the user’s
body. None compliance to the above restrictions may
violate FCC RF exposure guidelines.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of http:/
/www.fcc.gov/oet/fccid after searching on FCC ID
A3LSGHA401.
Appendix B: Guide to safe and responsible
wireless phone use
Cellular Telecommunications & Internet Association
“Safety is the most important call you will ever make.”
A guide to safe and responsible wireless
phone use
TENS OF MILLIONS OF PEOPLE IN THE U.S. TODAY TAKE
ADVANTAGE OF THE UNIQUE COMBINATION OF
CONVENIENCE, SAFETY AND VALUE DELIVERED BY THE
WIRELESS TELEPHONE. QUITE SIMPLY, THE WIRELESS
PHONE GIVES PEOPLE THE POWERFUL ABILITY TO
COMMUNICATE BY VOICE-ALMOST ANYWHERE, ANYTIME-
32
Health and safety information
WITH THE BOSS, WITH A CLIENT, WITH THE KIDS, WITH
EMERGENCY PERSONNEL OR EVEN WITH THE POLICE.
EACH YEAR, AMERICANS MAKE BILLIONS OF CALLS FROM
THEIR WIRELESS PHONES, AND THE NUMBERS ARE
RAPIDLY GROWING.
But an important responsibility accompanies those
benefits, one that every wireless phone user must uphold.
When driving a car, driving is your first responsibility. A
wireless phone can be an invaluable tool, but good
judgment must be exercised at all times while driving a
motor vehicle whether on the phone or not.
The basic lessons are ones we all learned as teenagers.
Driving requires alertness, caution and courtesy. It
requires a heavy dose of basic common sense-keep your
head up, keep your eyes on the road, check your mirrors
frequently and watch out for other drivers. It requires
obeying all traffic signs and signals and staying within the
speed limit. It means using seat belts and requiring other
passengers to do the same.
But with wireless phone use, driving safely means a little
more. This brochure is a call to wireless phone users
everywhere to make safety their first priority when behind
the wheel of a car. Wireless telecommunications is keeping
us in touch, simplifying our lives, protecting us in
emergencies and providing opportunities to help others in
need. When it comes to the use of wireless phones, safety
is your most important call.
Wireless phone “safety tips”
Below are safety tips to follow while driving and using a
wireless phone which should be easy to remember:
1. Get to know your wireless phone and its features such
as speed dial and redial. Carefully read your
instruction manual and learn to take advantage of
valuable features most phones offer, including
automatic redial and memory. Also, work to memorize
the phone keypad so you can use the speed dial
function without taking your attention off the road.
2. When available, use a hands free device. A number of
hands free wireless phone accessories are readily
available today. Whether you choose an installed
mounted device for your wireless phone or a speaker
phone accessory, take advantage of these devices if
available to you.
3. Position your wireless phone within easy reach. Make
sure you place your wireless phone within easy reach
and where you can grab it without removing your eyes
from the road. If you get an incoming call at an
inconvenient time, if possible, let your voicemail
answer it for you.
Health and safety information
33
4. Suspend conversations during hazardous driving
conditions or situations. Let the person you are
speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather
conditions. Rain, sleet, snow and ice can be
hazardous, but so is heavy traffic. As a driver, your
first responsibility is to pay attention to the road.
5. Do not take notes or look up phone numbers while
driving. If you are reading an address book or
business card, or writing a “to do” list while driving a
car, you are not watching where you are going. It’s
common sense. Don’t get caught in a dangerous
situation because you are reading or writing and not
paying attention to the road or nearby vehicles.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan your calls before you begin your trip
or attempt to coincide your calls with times you may
be stopped at a stop sign, red light or otherwise
stationary. But if you need to dial while driving, follow
this simple tip-dial only a few numbers, check the road
and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Stressful or emotional
conversations and driving do not mix-they are
distracting and even dangerous when you are behind
the wheel of a car. Make people you are talking with
aware you are driving and if necessary, suspend
conversations which have the potential to divert your
attention from the road.
8. Use your wireless phone to call for help. Your wireless
phone is one of the greatest tools you can own to
protect yourself and your family in dangerous
situations-with your phone at your side, help is only
three numbers away. Dial 9-1-1 or other local
emergency number in the case of fire, traffic accident,
road hazard or medical emergency. Remember, it is a
free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. Your wireless phone provides you a
perfect opportunity to be a “Good Samaritan” in your
community. If you see an auto accident, crime in
progress or other serious emergency where lives are
in danger, call 9-1-1 or other local emergency number,
as you would want others to do for you.
10. Call roadside assistance or a special wireless non
emergency assistance number when necessary.
Certain situations you encounter while driving may
require attention, but are not urgent enough to merit a
call for emergency services. But you still can use your
34
Health and safety information
wireless phone to lend a hand. If you see a broken-
down vehicle posing no serious hazard, a broken traffic
signal, a minor traffic accident where no one appears
injured or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
wireless number.
Careless, distracted individuals and people driving
irresponsibly represent a hazard to everyone on the road.
Since 1984, the Cellular Telecommunications Industry
Association and the wireless industry have conducted
educational outreach to inform wireless phone users of
their responsibilities as safe drivers and good citizens. As
we approach a new century, more and more of us will take
advantage of the benefits of wireless telephones. And, as
we take to the roads, we all have a responsibility to drive
safely.
“The wireless industry reminds you to use your phone
safely when driving.”
Cellular Telecommunications & Internet Association For
more information, please call 1-888-901-SAFE.
For updates: http://www.wow-com.com/consumer/issues/
driving/articles.cfm?ID =85
Appendix C: Consumer update on wireless
phones
U.S. Food and Drug Administration
1. What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called cell, mobile, or
PCS phones. These types of wireless phones can expose
the user to measurable radio frequency energy (RF)
because of the short distance between the phone and the
user s head. These RF exposures are limited by Federal
Communications Commission safety guidelines that were
developed with the advice of FDA and other federal health
and safety agencies. When the phone is located at greater
distances from the user, the exposure to RF is drastically
lower because a person’s RF exposure decreases rapidly
with increasing distance from the source. The so-called
“cordless phones,” which have a base unit connected to
the telephone wiring in a house, typically operate at far
lower power levels, and thus produce RF exposures well
within the FCC’s compliance limits.
2. Do wireless phones pose a health hazard?
Health and safety information
35
The available scientific evidence does not show that any
health problems are associated with using wireless
phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of
radio frequency energy (RF) in the microwave range while
being used. They also emit very low levels of RF when in
the stand-by mode. Whereas high levels of RF can produce
health effects (by heating tissue), exposure to low level RF
that does not produce heating effects causes no known
adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some
studies have suggested that some biological effects may
occur, but such findings have not been confirmed by
additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
3. What is FDA’s role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiation
emitting consumer products such as wireless phones
before they can be sold, as it does with new drugs or
medical devices. However, the agency has authority to
take action if wireless phones are shown to emit radio
frequency energy (RF) at a level that is hazardous to the
user. In such a case, FDA could require the manufacturers
of wireless phones to notify users of the health hazard and
to repair, replace or recall the phones so that the hazard
no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
• Support needed research into possible biological
effects of RF of the type emitted by wireless phones;
• Design wireless phones in a way that minimizes any
RF exposure to the user that is not necessary for
device function; and
• Cooperate in providing users of wireless phones with
the best possible information on possible effects of
wireless phone use on human health
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency Federal
Communications Commission
36
Health and safety information
• Occupational Safety and Health Administration
• National Telecommunications and Information
Administration
• The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless phones
with the Federal Communications Commission (FCC). All
phones that are sold in the United States must comply
with FCC safety guidelines that limit RF exposure. FCC
relies on FDA and other health agencies for safety
questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than
those they can get from wireless phones. Base stations
are thus not the primary subject of the safety questions
discussed in this document.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program
and with groups of investigators around the world to
ensure that high priority animal studies are conducted to
address important questions about the effects of exposure
to radio frequency energy (RF).
FDA has been a leading participant in the World Health
Organization International Electromagnetic Fields (EMF)
Project since its inception in 1996. An influential result of
this work has been the development of a detailed agenda
of research needs that has driven the establishment of
new research programs around the world. The Project has
also helped develop a series of public information
documents on EMF issues.
FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research
and Development Agreement (CRADA) to do research on
wireless phone safety. FDA provides the scientific
oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
investigators. The initial research will include both
Health and safety information
37
laboratory studies and studies of wireless phone users.
The CRADA will also include a broad assessment of
additional research needs in the context of the latest
research developments around the world.
4. What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products—and at this point we
do not know that there is—it is probably very small. But if
you are concerned about avoiding even potential risks,
you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is a
key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone
will reduce RF exposure.
If you must conduct extended conversations by wireless
phone every day, you could place more distance between
your body and the source of the RF, since the exposure
level drops off dramatically with distance. For example,
you could use a headset and carry the wireless phone
away from your body or use a wireless phone connected to
a remote antenna
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like
those described above to reduce your RF exposure from
wireless phone use.
5. What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you
want to take steps to lower exposure to radio frequency
energy (RF), the measures described above would apply
to children and teenagers using wireless phones. Reducing
the time of wireless phone use and increasing the distance
between the user and the RF source will reduce RF
exposure.
Some groups sponsored by other national governments
have advised that children be discouraged from using
wireless phones at all. For example, the government in the
United Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly precautionary;
it was not based on scientific evidence that any health
hazard exists.
38
Health and safety information
6. Do hands-free kits for wireless phones reduce risks
from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free kits
can be used with wireless phones for convenience and
comfort. These systems reduce the absorption of RF
energy in the head because the phone, which is the source
of the RF emissions, will not be placed against the head.
On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part
of the body will absorb more RF energy. Wireless phones
marketed in the U.S. are required to meet safety
requirements regardless of whether they are used against
the head or against the body. Either configuration should
result in compliance with the safety limit.
7. Do wireless phone accessories that claim to shield the
head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that accessories that claim to shield the head from
those emissions reduce risks. Some products that claim to
shield the user from RF absorption use special phone
cases, while others involve nothing more than a metallic
accessory attached to the phone. Studies have shown that
these products generally do not work as advertised. Unlike
“hand-free” kits, these so-called “shields” may interfere
with proper operation of the phone. The phone may be
forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal
trade Commission (FTC) charged two companies that sold
devices that claimed to protect wireless phone users from
radiation with making false and unsubstantiated claims.
According to FTC, these defendants lacked a reasonable
basis to substantiate their claim.
8. What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason, FDA
helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones.
This test method is now part of a standard sponsored by
the Association for the Advancement of Medical
instrumentation (AAMI). The final draft, a joint effort by
FDA, medical device manufacturers, and many other
groups, was completed in late 2000. This standard will
Health and safety information
39
allow manufacturers to ensure that cardiac pacemakers
and defibrillators are safe from wireless phone EMI.
FDA has tested hearing aids for interference from
handheld wireless phones and helped develop a voluntary
standard sponsored by the Institute of Electrical and
Electronic Engineers (IEEE). This standard specifies test
methods and performance requirements for hearing aids
and wireless phones so that no interference occurs when a
person uses a compatible phone and a compatible hearing
aid at the same time. This standard was approved by the
IEEE in 2000.
FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmful interference be found to occur, FDA will conduct
testing to assess the interference and work to resolve the
problem.
9. What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in their
research methods. Animal experiments investigating the
effects of radio frequency energy (RF) exposures
characteristic of wireless phones have yielded conflicting
results that often cannot be repeated in other laboratories.
A few animal studies, however, have suggested that low
levels of RF could accelerate the development of cancer in
laboratory animals. However, many of the studies that
showed increased tumor development used animals that
had been genetically engineered or treated with cancer
causing chemicals so as to be pre-disposed to develop
cancer in the absence of RF exposure. Other studies
exposed the animals to RF for up to 22 hours per day.
These conditions are not similar to the conditions under
which people use wireless phones, so we don t know with
certainty what the results of such studies mean for human
health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use of
wireless phones and primary brain cancer, gioma,
meningioma, or acoustic neuroma, tumors of the brain or
salivary gland, leukemia, or other cancers. None of the
studies demonstrated the existence of any harmful health
effects from wireless phone RF exposures. However, none
of the studies can answer questions about long-term
exposures, since the average period of phone use in these
studies was around three years.
40
Health and safety information
10. What research is needed to decide whether RF
exposure from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological
studies of people actually using wireless phones would
provide some of the data that are needed. Lifetime animal
exposure studies could be completed in a few years.
However, very large numbers of animals would be needed
to provide reliable proof of a cancer promoting effect if
one exists. Epidemiological studies can provide data that
is directly applicable to human populations, but 10 or
more years follow-up may be needed to provide answers
about some health effects, such as cancer. This is because
the interval between the time of exposure to a cancer-
causing agent and the time tumors develop - if they do -
may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in
measuring actual RF exposure during day-to-day use of
wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which
model of phone is used.
11. Which other federal agencies have responsibilities
related to potential RF health effects?
Additional information on the safety of RF exposures from
various sources can be obtained from the following
organizations.
FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
Occupational Safety and Health Administration’s (OSHA):
http://www.osha-slc.gov/SLTC/radiofrequencyradiation/
index.html
National Institute for Occupational Safety and Health
(NIOSH):
http://www.cdc.gov/niosh/topics/emf/
World health Organization (WHO):
http://www.who.int/peh-emf/
International Commission on Non-Ionizing Radiation
Protection:
http://www.icnirp.de
Health Protection Agency (UK)
http://www.hpa.org.uk/radiation/
*
* US Food and Drug Administration http://www.fda.gov/cellphones
121
Index
A
ABC mode, text input • 30
Alarm • 48
Answering
call • 32
second call • 34
Auto redial • 101
B
Barring, calls • 100
Battery
charging • 7
low indicator • 8
precautions • 113
Bluetooth
receiving, data • 104
sending, data • 103
settings • 102
Broadcast messages • 87
Browser, web • 57
C
Calendar • 51
Call costs • 39
Call log
dialled • 37
missed • 37
received • 37
Call time • 38
Caller groups • 42
Calls
answering • 32
barring • 100
holding • 33
making • 31
redialling • 32
rejecting • 32
transferring • 35
waiting • 100
Camera
photos • 70
videos • 74
Characters, enter • 28
Configuration messages • 83
Connection tone • 94
Creating messages
e-mail • 79
MMS • 78
SMS • 77
D
Date, set • 97
Deleting
call log • 37
e-mail • 83, 84, 86, 87
MMS • 82, 83, 84, 87
photos • 64, 73
SMS • 82, 83, 84, 87
video clips • 65, 76
Dialled calls • 37
122
Index
Display
layout • 11
settings • 95
DRM (Digital Rights
Management) • 62
DTMF tones, send • 35
E
E-mails
creating/sending • 81
deleting • 86
settings • 91
viewing • 84, 85
Emergency calls • 117
F
FDN (Fixed Dialling Number)
mode • 108
File manager • 62
Flip tone • 95
G
Games • 93
Greeting message • 95
H
Health and safety • 112
Holding, call • 33
I
Icons, description • 11
Images, downloaded • 63
Inbox, messages
e-mail • 84, 85
SMS/MMS • 81
International calls • 31
Internet • 57
J
Java applications • 93
K
Key tones
selecting • 95
sending/muting • 35
volume • 95
L
Language, select • 97
Last number, redial • 32
Locking
call log • 108
contacts • 108
media contents • 108
messages • 108
phone • 108
USIM/SIM card • 108
Low battery indicator • 8
M
Media player • 107
Memory card
accessing files • 70
Memory status
contacts • 45
downloaded items • 70
messages • 93
phone • 109
scheduled things • 55
Messages
configuration • 84
e-mail • 84
Index
123
MMS • 78, 82
push • 83
SMS • 77, 81
Minute minder • 94
Missed alarm events • 51
Missed calls • 37
MMS messages
creating/sending • 78
deleting • 82
settings • 89
viewing • 82
Multiparty-call • 34
Music, downloaded • 67
My Files • 62
N
Name card • 43
Names
entering • 28
searching • 40
Network selection • 104
Numbers
searching • 40
storing • 41
O
Organiser • 45
Outbox, messages • 83
P
Password
barring • 100
Phone
care and maintenance • 119
display • 11
icons • 11
locking • 108
password • 109
resetting • 109
switching on/off • 9
unpacking • 6
Phone password • 109
Phonebook
adding • 41
editing • 40
finding • 40
options • 40
speed-dialling • 43
Photos
editing • 63
taking • 70
viewing • 63
PIN, change • 109
PIN2, change • 109
Privacy • 108
Problems, solve • 110
Profiles • 94
Push messages • 83, 93
R
Received calls • 37
Received messages
e-mail • 84, 85
MMS/SMS • 81
Recording
videos • 74
voice memos • 49
Redialling
automatically • 101
124
Index
manually • 32
Resetting phone • 110
Ringer
incoming calls • 94
messages • 94
Road safety • 115
Roaming • 104
S
Safety
information • 112
precaution • 1
Security calls • 108
Sent messages • 83
Shortcuts • 97
Silent mode • 16
SIM card
inserting • 7, 8
locking • 108
SMS messages
creating/sending • 77
deleting • 82, 87
settings • 88
viewing • 81
Sound profiles • 94
Speakerphone • 34
Speed-dial • 43
Switching applications • 27
Switching on/off
microphone • 35
phone • 9
T
T9 mode, text input • 28
Templates, message • 86
Text, enter • 28
Time, set • 97
U
USIM card
inserting • 7
locking • 108
V
Videos
playing • 65
recording • 74
Voice recorder
playing • 49
recording • 49
Voicemail server • 93
W
Waiting call • 100
Web browser
access • 58
bookmarks • 59