Samsung Electronics Co SGHD410 Single-Band PCS GSM Phone User Manual
Samsung Electronics Co Ltd Single-Band PCS GSM Phone Users Manual
Users Manual
TRI BAND
GPRS TELEPHONE
SGH-D410
* Some of the contents of this manual may differ from your phone,
depending upon the software installed or your service provider.
Printed in Korea
Code No.: GH68-xxxxxA
English. 05/2003. Rev. 1.0
World Wide Web
http://www.samsungmobile.com
1st version
(2003. 05.15)
Because the software of the current working
sample and the menu tree are different from
each other, the contents of this manual are
borrowed from the SGH-P400 manual.
2
Contents
3
Contents
Important Safety Precautions................................ 7
Unpacking.............................................................. 9
Your Phone .......................................................... 10
Phone Layout .......................................................... 10
Display................................................................... 13
Service Light........................................................... 15
Camera .................................................................. 16
Getting Started .................................................... 17
Installing the SIM Card............................................. 17
Charging the Battery................................................ 19
Switching the Phone On or Off................................... 21
Call Functions ...................................................... 22
Making a Call .......................................................... 22
Adjusting the Volume ............................................... 24
Answering a Call...................................................... 25
Viewing Missed Calls ................................................ 26
Quickly Switching to Silent Mode................................ 28
Selecting Functions and Options .......................... 29
Phonebook........................................................... 31
Storing a Number with a Name.................................. 31
Using Phonebook Entry Options ................................. 34
Searching for a Number in Phonebook ........................ 35
Editing a Caller Group .............................................. 37
Speed-dialling ......................................................... 38
Deleting All of the Phonebook Entries ......................... 40
Checking the Memory Status ..................................... 41
Entering Text ....................................................... 42
Changing the Text Input Mode................................... 43
Using the T9 Mode ................................................... 44
Using the Alphabet Mode .......................................... 46
Using the Symbol Mode ............................................ 47
Using the Number Mode ........................................... 48
Contents
4
Options During a Call ........................................... 49
Putting a Call on Hold............................................... 49
Searching for a Number in Phonebook ........................ 50
Switching the Microphone Off (Mute) .......................... 51
Muting/Sending Key Tones........................................ 52
Sending DTMF Tones................................................ 52
Answering a Second Call........................................... 53
Making a Multi-party Call .......................................... 53
Using the Menus .................................................. 56
Accessing a Menu Function by Scrolling ...................... 56
Accessing a Menu Function by Using Its Shortcut ......... 57
List of Menu Functions.............................................. 57
Text Messages ..................................................... 63
Inbox
(Menu 1.1).............................................................
63
Outbox
(Menu 1.2)
................................................... 65
Write New
(Menu 1.3) .....................................................
66
Templates
(Menu 1.4) .....................................................
69
Settings
(Menu 1.5)
.................................................. 69
Delete All
(Menu 1.6).......................................................
71
Memory Status
(Menu 1.7) ..............................................
71
Voice Mail
(Menu 1.8) ......................................................
72
Broadcast
(Menu 1.9) ......................................................
73
Picture Messages ................................................. 75
Inbox
(Menu 2.1)
..................................................... 75
Outbox
(Menu 2.2) ..........................................................
78
Draft
(Menu 2.3)
...................................................... 79
Write New
(Menu 2.4) .....................................................
80
Templates
(Menu 2.5) .....................................................
84
Delete All
(Menu 2.6)
................................................ 85
Memory Status
(Menu 2.7) ..............................................
85
Setup
(Menu 2.8) ............................................................
86
MMS Profile
(Menu 2.9) ...................................................
87
Call Records......................................................... 88
Missed Calls
(Menu 3.1)...................................................
88
Received Calls
(Menu 3.2) ...............................................
89
Dialled Calls
(Menu 3.3)
............................................ 89
Delete All
(Menu 3.4)
................................................ 90
Call Time
(Menu 3.5)
................................................ 90
Call Cost
(Menu 3.6) ........................................................
91
Contents
5
Camera ................................................................ 92
Take and Send
(Menu 4.1) ..............................................
92
My Photo
(Menu 4.2)
................................................. 95
Video
(Menu 4.3)
...................................................... 97
Sound Settings .................................................... 99
Ring Tone
(Menu 5.1) ......................................................
99
Ring Volume
(Menu 5.2) ..................................................
99
Alert Type
(Menu 5.3)
............................................. 100
Keypad Tone
(Menu 5.4) ...............................................
100
Message Tone
(Menu 5.5)
........................................ 101
Sliding Tone
(Menu 5.6) ................................................
102
Power On/Off
(Menu 5.7)
......................................... 102
Extra Tones
(Menu 5.8)
........................................... 102
Phone Settings .................................................. 104
Infrared Activate
(Menu 6.1)
.................................... 104
Display Settings
(Menu 6.2)
..................................... 105
Greeting Message
(Menu 6.3)
................................... 108
Own Number
(Menu 6.4) ...............................................
108
Language
(Menu 6.5)
.............................................. 109
Security
(Menu 6.6).......................................................
109
Extra Settings
(Menu 6.7) .............................................
112
Short Cut
(Menu 6.8).....................................................
113
Reset Settings
(Menu 6.9) .............................................
113
Organiser........................................................... 114
Alarm
(Menu 7.1) ..........................................................
114
Calendar
(Menu 7.2)
............................................... 115
Time & Date
(Menu 7.3)
.......................................... 118
Calculator
(Menu 7.4) ....................................................
119
To Do List
(Menu 7.5)
............................................. 119
Currency Exchange
(Menu 7.6) .....................................
122
Network Services............................................... 123
Call Diverting
(Menu 8.1)
......................................... 123
Call Barring
(Menu 8.2) .................................................
125
Call Waiting
(Menu 8.3)
........................................... 127
Network Selection
(Menu 8.4) .......................................
128
Caller ID
(Menu 8.5) ......................................................
129
Closed User Group (CUG)
(Menu 8.6)............................
129
Band Selection
(Menu 8.7) ............................................
131
Contents
6
Funbox .............................................................. 132
WAP Browser
(Menu 9.1)...............................................
132
Games
(Menu 9.2) .........................................................
138
Sounds
(Menu 9.3) ........................................................
141
Images
(Menu 9.4) ........................................................
141
Delete All
(Menu 9.5)
.............................................. 142
Memory Status
(Menu 9.6) ............................................
142
Solving Problems ............................................... 143
Access Codes ..................................................... 146
Phone Password .................................................... 146
PIN ...................................................................... 147
PUK ..................................................................... 147
PIN2 .................................................................... 148
PUK2 ................................................................... 148
Barring Password................................................... 149
Health and Safety Information .......................... 150
Exposure to Radio-Frequency Energy
(SAR Information) ................................................. 150
Precautions When Using Batteries ............................ 151
Road Safety .......................................................... 153
Operating Environment........................................... 155
Electronic Devices.................................................. 155
Potentially Explosive Environments .......................... 157
Emergency Calls .................................................... 158
Other Important Safety Information ......................... 159
Care and Maintenance ............................................ 160
Glossary ............................................................ 162
Index................................................................. 167
Quick Reference Card ........................................ 173
7
Important Safety
Precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching Off When Refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using them
in aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch your phone off near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special Regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
FCC RF EXPOSURE INFORMATION
In August 1996 the Federal Communications Commission (FCC) of
the United States with its action in Report and Order FCC 96-326
adopted an updated safety standard for human exposure to radio
frequency electromagnetic energy emitted by FCC regulated
transmitters. Those guidelines are consistent with the safety
standard previously set by both U.S. and international standards
bodies. The design of this phone complies with the FCC guidelines
and these international standards.
Use only the supplied or an approved antenna. Unauthorized
antennas, modifications, or attachments could impair call quality,
damage the phone, or result in violation of FCC regulations.
Do not use the phone with a damaged antenna. If a damaged
antenna comes into contact with the skin, a minor burn may result.
Please contact your local dealer for replacement antenna.
Body-worn Operation
This device was tested for typical body-worn operations with the back
of the phone kept 1.5 cm. from the body. To maintain compliance
with FCC RF exposure requirements, use only belt-clips, holsters
or similar accessories that maintain a 1.5 cm. separation distance
between the user’s body and the phone, including the antenna.
The use of belt-clips, holsters and similar accessories should not
contain metallic components in its assembly. The use of accessories
that do not satisfy these requirements may not comply with FCC
RF exposure requirements, and should be avoided. Contact your
local dealer for optional accessory items.
Vehicle Mounted External Antenna (optional, if
available.)
A minimum separation distance of 7.9 inches (20cm) must be
maintained between a person and the vehicle mounted external
antenna to satisfy FCC RF exposure requirements.
For more information about RF exposure, please visit the FCC web
site at www
Important Safety Precautions
8
Sensible Use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency Call
Ensure the phone is switched on and in service. Key
in the emergency number for your present location,
then press the key. You must deactivate any
unnecessary features before you can make an
emergency call. Give all the necessary information
as accurately as possible. Do not cut off the call
until given permission to do so.
Water Resistance
Your phone is not water-resistant. Keep it dry.
Accessories and Batteries
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories
could damage your phone and may be dangerous.
Qualified Service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see “Health
and Safety Information” on page 150.
9
Unpacking
Your package contains the following items:
In addition, you can obtain the following
accessories for your phone from your local
Samsung dealer:
• Standard batteries • Ear-microphone
• Simple hands-free kit • Car holder
• Cigarette lighter adapter• Battery charger
• Travel charger/adapter
Handset Travel Adapter
Battery Ear-microphone
User’s Manuals Software CD-ROM
Data Cable
Finger Strap
10
Your Phone
Phone Layout
The following illustrations show the main elements
of your phone:
Earpiece
Display
Power on/off /
menu exit key
Alphanumeric
keys
Special
function keys
Volume/menu
browse keys
Dial/menu
confirmation key
IrDA port
Microphone
Ear-microphone
jack
Soft key (left)
Navigation key
s
(Up/Down/Left/
Right)
Cancel/
correction key
WAP browser
key
Sliding
folder
Soft key (right)
Camera
Antenna
Camera
Service light
Your Phone
11
Key(s) Description
In Menu Mode, scroll through the menu
options and the Phonebook memory.
In Idle Mode, allow you to access your
favourite menu options directly. For
further details about shortcuts, see
page 113.
In Menu Mode, return to the previous
menu level and select the current
menu respectively.
When entering text, move the cursor to
the left and right respectively.
In Idle Mode, allow you to access your
favourite menu options directly. For
further details about shortcuts, see
page 113.
(soft keys)
Perform the functions indicated by the
text above them, on the bottom line of
the display.
In Idle Mode, directly launches the WAP
(Wireless Application Protocol) browser.
Makes or answers a call.
In Idle Mode, recalls the last number
dialled or received when held down.
In Menu Mode, selects a menu function
or stores information that you have
entered, such as a name in the phone
or SIM memory.
Your Phone
12
Ends a call. Also switches the phone on
and off when held down.
In Menu Mode, cancels your input and
returns to Idle Mode.
Deletes characters from the display.
In Menu Mode, returns to the previous
menu level.
In Idle Mode, quickly accesses your
voice mail when held down.
Enter numbers, letters and some
special characters.
Enter special characters.
Perform various functions.
(on the left side of the phone)
During a call, adjust the earpiece
volume.
In Idle Mode with the folder slid up,
adjust the keypad tone volume.
In Menu Mode, scroll through the menu
options and the Phonebook memory.
Key(s) Description (continued)
Your Phone
13
Display
Display Layout
The display has three areas:
Area Description
First line Displays various icons. See
page 14.
Middle lines Display messages, instructions
and any information that you
enter, such as the number to be
dialled.
Last line Shows the functions currently
assigned to the two soft keys.
Icons
Text and
graphic area
Soft key
indicators
Menu Name
Your Phone
14
Icons
Icon Description
Shows the received signal strength. The
greater the number of bars, the stronger
the signal.
Appears when a call is in progress.
Appears when you are connected to the
GPRS network.
Appears when you are out of your home
area and have logged onto a different
network; for example, when travelling in
other countries.
Appears when a new text message has
been received.
Appears when a new voice mail message
has been received.
Appears when you set an alarm to ring at a
specified time.
Appears when Silent Mode is active or
when you set the Alert Type menu (Menu
5.3) so that the phone vibrates when you
receive a call. For further details, see
page 28 and page 100 respectively.
Appears when the IrDA port is active. For
details, see page 104.
Appears when the mute mode is active.
Shows the level of your battery. The more
bars you see, the more power you have
left.
Your Phone
15
Backlight
A backlight illuminates the display and the keypad.
When you press any key or slide up the folder, the
backlight turns on and remains on for a given
period of time, depending on the Back Light menu.
The display turns off after one minute to conserve
your battery power.
To specify the length of time the backlight is active,
set the Back Light menu (Menu 6.2.4). See
page 106 for further details.
You can also set the phone to use the backlight only
during a specified period of time, in the Auto Light
menu (Menu 6.2.5). See page 107 for further
details.
Service Light
The service light is below the display. It flashes
when services are available on the phone.
To activate or deactivate the service light, set the
Service Light menu (Menu 6.2.6). See page 107
for further details.
Service light
Your Phone
16
Camera
The camera module on the top left of your phone
allows you to take a picture while on the move.
For further details about the Camera feature, see
page 92.
17
Getting Started
Installing the SIM Card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available and so on.
Important! The plug-in SIM card and its contacts
can be easily damaged by scratches
or bending, so be careful when
handling, inserting or removing the
card.
Keep all SIM cards out of the reach of
small children.
1. If necessary, switch off the phone by holding
down the key until the power-off image
displays.
2. Remove the battery. To do so:
➀ Press the catch above the battery and hold it
in that position.
➁ Slide the battery and lift it away, as shown.
➀
➁
Getting Started
18
3. Slide the SIM card into the SIM card socket, as
shown, so that it locks the card into position.
Make sure the gold contacts of the card face into
the phone.
Note
: When you need to remove the SIM card,
slide it, as shown, and take it out of the
socket.
4. Replace the battery, taking care to match the
tabs on the battery with the grooves on the
phone.
Getting Started
19
5. Slide the battery towards the top of the phone
until it clicks into place. Make sure that the
battery is properly installed before switching the
power on.
Charging the Battery
Your phone is powered by a rechargeable Li-ion
battery. A travel adapter comes with your phone for
charging the battery. Use only approved batteries
and chargers. Ask your local Samsung dealer for
further details.
The travel adapter allows you to use the phone while
the battery is charging, but this causes the phone to
charge more slowly.
Note
: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
200 minutes.
1. With the battery in position on the phone, plug
the connector of the travel adapter into the jack
at the bottom of the phone.
Getting Started
20
2. Plug the adapter into a standard AC wall outlet.
3. When charging is finished, unplug the adapter
from the power outlet and from the phone by
pressing the grey tabs on both sides of the
connector and pulling the connector out.
Note
: You must unplug the adapter before removing
the battery from the phone during charging;
otherwise, the phone could be damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, a warning tone sounds and a
message repeats at regular intervals on the display.
When the battery level becomes too low, the phone
automatically turns off.
➀
➀➁
Getting Started
21
Switching the Phone On or Off
1. Press and hold the key until the phone
switches on.
2. If the phone asks you to enter the phone
password, enter the password and press the OK
soft key. The phone password is preset to
“00000000” at the factory. For further details,
see page 146.
3. If the phone asks for a PIN, enter the PIN and
press the OK soft key. For further details, see
page 147.
The phone searches for your network and, after
finding it, the idle screen appears on the display,
as illustrated below. Now, you can make or
receive a call.
Note
: The display language is preset to English at
the factory. To change the language, use
the
Language
menu (
Menu 6.5
). For
further details, see page 109.
4. When you wish to switch the phone off, press
and hold the key until the power-off image
displays.
Service Provider
07:30
Wed 06 Mar
Menu Name
22
Call Functions
Making a Call
When the idle screen displays, enter the area code
and phone number, and press the key.
Note
: When you check the
Auto Redial
option in the
Extra Settings
menu (
Menu 6.7
), the
phone automatically redials up to ten times
when the person does not answer the call or is
already on the phone. See page 112 for further
details.
Making an International Call
1. Press and hold the 0 key.
The + character appears.
2. Enter the country code, area code and phone
number and press the key.
Correcting the Number
To clear Press the
the last digit
displayed
C key.
any other digit in
the number
Left or Right key until the
cursor is immediately to the
right of the digit to be cleared.
Press the C key. You can also
insert a missing digit simply by
pressing the appropriate key.
the whole display C key and hold it for more than
one second.
Call Functions
23
Ending a Call
When you want to finish your call, briefly press the
key.
Redialling the Last Number
The phone stores the numbers you dial, receive or
miss if the caller is identified. See “Call Records” on
page 88 for further details.
To recall any of these numbers:
1. If you have typed characters on the display,
press the key to return to Idle Mode.
2. Press the key to display a list of the last
numbers in the order in which the calls were
made.
3. Use the Up and Down keys to scroll through the
numbers until the number you want highlights.
4. T
o Press the
dial the number key.
edit the number Options soft key and
select Edit. Change the
number as required,
referring to “Correcting
the Number” on page 22
for further details.
delete the number Options soft key and
select Delete.
delete all of the
numbers on the Call
Log list
Options soft key and
select Delete All. When
a confirming message
displays, press the Yes
soft key.
Call Functions
24
Making a Call from Phonebook
You can store the phone numbers that you use
regularly in the SIM card or the phone’s memory,
which are collectively called Phonebook. Simply
select a name to recall the associated number. For
further details about the Phonebook features, see
page 31.
Adjusting the Volume
During a call, if you want to adjust the earpiece
volume, use the Volume keys on the left side of the
phone.
Press the key to increase the volume level and
the key to decrease the level.
In Idle Mode with the folder slid up, you can also
adjust the keypad tone volume using these keys.
Call Functions
25
Answering a Call
When somebody calls you, the phone rings and
shows the incoming call animation.
When the caller can be identified, the caller’s phone
number, or name if stored in your Phonebook,
displays.
1. Press the key or the Accept soft key to
answer the incoming call.
When the Anykey Answer option in the Extra
Settings menu (Menu 6.7) is checked, you can
press any key to answer a call except for
the key and the Reject soft key. See
page 112.
When the Active Folder option in the Extra
Settings menu (Menu 6.7) is checked, you can
answer the call simply by sliding the folder up.
See page 112.
Note
: To reject the call, press and hold the Volume
keys, or press the
Reject
soft key or
key.
2. End the call by pressing the key.
Note
: You can answer a call while using Phonebook or
menu features. After ending the call, the phone
returns to the function screen you were using.
Call Functions
26
Viewing Missed Calls
When you are unable to answer a call for any
reason, you can find out who is calling you, if this
service is available, so that you can call the person
back.
The number of missed calls displays on the idle
screen immediately after a call is missed.
To view the missed call immediately:
1. Press the View soft key.
The number for the most recent missed call
displays, if available.
Editing a Missed Call Number
Note
: When the number for the missed call is not
available, the
Edit
option does not display.
1. Press the Options soft key.
2. Press the Up or Down key to highlight the Edit
option.
3. Press the Select soft key.
2. To Press the
scroll through the
missed calls
Up or Down key.
call the number
displayed
key.
edit or delete a missed
call number
Select soft key. See
below.
Call Functions
27
4. Change the number, as required.
Deleting a Missed Call
1. Press the Options soft key.
2. If necessary, press the Up or Down key to
highlight the Delete option.
3. Press the Select soft key.
You can press the key at any time to exit the
Missed Call feature.
Note
: You can access the Missed Call feature at any
time by selecting the
Missed Calls
menu
(
Menu 3.1
). For further details, see page 88.
5. To Press the
call the number key.
store the
number
Save soft key and enter
the name and location
required. For further
details, see page 31.
Call Functions
28
Quickly Switching to Silent Mode
Silent Mode is convenient when you wish to stop
the phone from making noise, in a theatre for
example.
In Idle Mode, press and hold the
key until the
“Silent Mode” message and the Vibration icon ( )
display.
In Silent Mode, your phone changes the sound
settings as follows:
To exit and reactivate the previous sound settings,
press and hold the
key again until “Exit Silent
Mode” appears. The Vibration icon ( ) no longer
displays.
Note
: When you turn the phone off, Silent Mode is
automatically deactivated.
Option New Setting
Alert Type (Menu 5.3) Vibration
Keypad Tone (Menu 5.4)Off
Message Tone (Menu 5.5) Light Only
Sliding Tone (Menu 5.6)Off
Power off tone Off
Extra Tones (Menu 5.8)Off
29
Selecting Functions
and Options
Your phone offers a set of functions that allow you
to customise it. These functions are arranged in
menus and sub-menus, accessed using the two soft
keys marked and . Each menu and sub-
menu allows you to view and alter the settings of a
particular function.
The roles of the soft keys vary according to the
function you are currently using; the label on the
bottom line of the display just above each key
indicates its current role.
Example:
Menu Name
Service Provider
07:30
Wed 06 Mar
Press the left soft
key to access Menu
Mode.
Press the right soft
key to access the
Phonebook feature.
Selecting Functions and Options
30
To view various functions/options available and
select the one you want:
1. Press the appropriate soft key.
In some functions, you may be asked for a
password or PIN. Enter the code and press the OK
soft key.
2. To Press the
select the:
• function displayed
• option highlighted
Select soft key or
the Right key.
view the next function
or highlight the next
option on a list
Down key or the
key on the left side of
the phone.
move back to the
previous function or
option on a list
Up key or the key
on the left side of the
phone.
move back up one
level in the structure
Left key, soft key
or C key.
exit the structure
without changing the
settings
key.
31
Phonebook
You can store phone numbers and their
corresponding names in the memory of your SIM
card and phone’s memories. They are physically
separate but are used as a single entity, called
Phonebook.
Storing a Number with a Name
There are two ways to store a number:
• Using the Save soft key in Idle Mode
• Using the New Entry option in the Phonebook
menu
Storing a Number in Idle Mode
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in Phonebook.
1. Enter the number you want to store.
Note
: If you make a mistake while entering a
number, correct it using the
C
key. For
further details, see page 22.
2. When you are sure that it is correct, press the
Save
soft key.
3. Select an icon to identify the category of the
number to be stored. Three categories are
available:
• : Mobile phone number
• : Office number
• : Home number
To select the category, press the Left or Right
key and press the Select soft key.
Phonebook
32
4. Select a memory location, either SIM or Phone,
by pressing the Up or Down key and press the
Select soft key.
Note
: When you change phones, any numbers
stored in your SIM card memory are
automatically available with the new phone,
whereas any numbers stored in the phone’s
memory must be reentered.
5. Enter a name and press the OK soft key.
The maximum length of a name depends on
your SIM card. For further details about how to
enter characters, see page 42.
6. If you do not want to save the number and
name in the suggested location, press the C key
to clear the location number and enter another
location by pressing the number keys.
7. Press the OK soft key to store the name and
number.
After storing, the phone displays the Phonebook
entry or name you just created.
8. To Press the
use the entry options Options soft key. For
further details, see
page 34.
return to the idle
screen
key.
Phonebook
33
Storing a Number Using the Phonebook
Menu
1. When the idle screen displays, press the Name
soft key.
2. Scroll to New Entry by pressing the Up or Down
key and press the Select soft key.
3. Select an icon to identify the category of the
number to be stored by pressing the Left or
Right key, and press the Select soft key.
Note
: The E-mail icon ( ) is available in this
step. It allows you to save an e-mail
address instead of a phone number.
4. Select a memory location, either SIM or Phone,
by pressing the Up or Down key and press the
Select soft key
5. Enter a name and press the
OK
soft key.
The maximum length of a name depends on
your SIM card. For further details about how to
enter characters, see page 42.
6. Enter the number or e-mail address you want to
store and press the Save soft key.
7. Continue the procedure from Step 6 on page 32
to store the number.
Phonebook
34
Using Phonebook Entry Options
While accessing any Phonebook entry, press the
Options soft key to access the options for the
entry.
The following options are available:
Paste: allows you to paste the number into the
normal dialling mode. Use this option to dial a
number similar to one in Phonebook, such as a
different extension in the same office.
Use the C key to change the number as required;
see page 22 for further details. When you are ready
to dial, press the key.
Edit:
allows you to edit the name and number.
Select
One Entry
to change one number for the
selected name. If you change the name, the
number is saved separately. Select
All Entry
to
change the name of the entry.
Delete: allows you to delete the name and number
from Phonebook. You are asked to confirm that you
wish to delete the name and number by pressing
the Yes soft key.
Copy: allows you to copy the number to another
location. Use this option to store a number similar
to one already in the memory; once copied, edit the
number and store it in Phonebook.
To Press the
select the
highlighted option
Select soft key or the Right
key.
highlight a
different option
Up or Down key until the
option you want highlights.
Phonebook
35
Caller Group: allows you to organise your
Phonebook entries in caller groups so that the
phone alerts you in a specific way when a person
from one of your groups calls you. Select one of the
ten groups available.
To remove an entry from a group, select the No
Group option.
For further details about how to change caller group
properties, see page 37.
Add Entry: allows you to add a new number to the
currently selected name.
Searching for a Number in
Phonebook
After storing numbers in Phonebook, you can
search for them in two ways; by name and by caller
group.
Searching for a Number by Name
1. When the idle screen displays, press the Name
soft key.
2. Press the Select soft key when Search
highlights. You are asked to enter a name.
3. Enter the first few letters of the name that you
want to find.
The Phonebook entries are listed, starting with
the first entry matching your input.
Phonebook
36
5. Once you have found the entry, press the
key to dial the number, or press the Options
soft key to access the Phonebook entry options;
for further details, see page 34.
Searching for a Number by Caller Group
1. When the idle screen displays, press the Name
soft key.
2. Scroll to Group Search by pressing the Up or
Down key and press the Select soft key. You are
asked to enter a group name.
3. Enter the first few letters of the group name that
you want to find.
The caller groups are listed, starting with the
first group matching your input.
4. If necessary, scroll to a group by pressing the Up
or Down key and press the View soft key.
The Phonebook entries in the caller group are
listed.
4. To Press the
view the highlighted
entry
View soft key.
select a different
entry
Up or Down key until
the entry highlights.
look for a name
starting with a
different letter
key labelled with the
letter you want to
enter.
Phonebook
37
6. Once you have found the entry, press the
key to dial the number, or press the Options
soft key to access the Phonebook entry options;
for further details, see page 34.
Editing a Caller Group
1. When the idle screen displays, press the Name
soft key.
2. Scroll to Group Edit by pressing the Up or
Down key and press the Select soft key.
3. Scroll through the group list by pressing the Up
or Down key.
4. When the group you want highlights, press the
Options soft key.
5. Select each option and change the settings, as
required. The following options are available:
• Call Ring Tone: allows you to set a ring tone
to be used when you receive a voice call from
a person in the group.
• SMS Tone: allows you to set a ring tone to be
used when you receive a message from a
person in the group.
5. To Press the
view the highlighted
entry
View soft key.
select a different
entry
Up or Down key until
the entry you want
highlights.
Phonebook
38
• Graphic: allows you to set a graphic icon to
be displayed when you receive a voice call
from a person in the group.
• Group Name: allows you to assign a name to
the group. For further details about how to
enter characters, see page 42.
6. When you finish changing the settings, press the
C or key.
Speed-dialling
Once you have stored phone numbers in
Phonebook, you can set up to eight speed-dial
entries and then dial them easily whenever you
want, simply by pressing the associated number
key.
Setting Up Speed-dial Entries
1. When the idle screen displays, press the Name
soft key.
2. Scroll to Speed Dial by pressing the Up or
Down key and press the Select soft key.
3. Select the key to which you wish to assign the
speed-dialling number, from the 2 to 9 keys,
and press the OK soft key.
Note
: If you have already assigned a number to
the key, the
Options
soft key replaces the
OK
soft key. Go to Step 6.
4. Select a Phonebook entry from the list and press
the View soft key.
Phonebook
39
5. Select a number, if the entry has more than one,
by pressing the Up or Down key and press the
Select soft key.
6. Once you have assigned a number to the key,
you can use the following options by pressing
the Options soft key:
• Change: allows you to assign a different
number to the key.
• Delete: allows you to clear the setting so that
no number is assigned to the key.
• Delete All: allows you to clear the settings for
all keys so that no numbers are assigned to
any of the keys.
• Number: allows you to view the number
assigned to the key.
7. When you finish setting the options, press the C
or key.
Speed-dialling from Phonebook
To speed-dial the numbers assigned to keys 2 to 9,
press and hold the appropriate key.
Note
: Memory location 1 is reserved for your Voice
Mail server number.
Phonebook
40
Deleting All of the Phonebook Entries
You can delete all of entries in the selected memory
or both memories.
1. When the idle screen displays, press the Name
soft key.
2. Scroll to Delete All by pressing the Up or Down
key and press the Select soft key.
3. To place a check mark by the memory you want
to empty, All, SIM or Phone, press the Mark
soft key.
You can remove the check mark by pressing the
Unmark soft key.
4. When you are finished marking, press the
Delete soft key to delete the entries in the
selected memory.
5. Enter the phone password and press the OK soft
key.
Note
: The password is preset to “00000000” at
the factory. To change it, see page 110.
6. When the confirming message appears, press
the Yes soft key.
To cancel the deletion, press the No soft key.
7. When you finish deleting, press the C or
key.
Phonebook
41
Checking the Memory Status
You can check how many names and numbers are
stored in Phonebook, in both the SIM card and
phone memories. You can also see the capacity of
both memories.
1. When the idle screen displays, press the Name
soft key.
2. Select the Memory Status option by pressing
the Up or Down key and press the Select soft
key.
3. Press the Up or Down key to view the number of
existing and remaining entries in the SIM card
and phone memories.
4. When you finish checking, press the C or
key.
42
Entering Text
When using your phone, you will often need to
enter text, such as when storing a name in
Phonebook, creating your personal greeting or
scheduling events on your calendar. You can enter
alphanumeric characters by using your phone’s
keypad.
Your phone has the following text input modes:
• T9 mode
This mode allows you to enter words with only
one keystroke per letter. Each key on the keypad
has more than one letter – when you press the 5
key once, J, K or L displays. The T9 mode
automatically compares your keystrokes with an
internal linguistic dictionary to determine the
correct word, thus requiring far fewer keystrokes
than the traditional alphabet mode.
•Alphabet mode
This mode allows you to enter letters by pressing
the key labelled with the letter you want to enter
once, twice, three or four times until it displays.
• Symbol mode
This mode allows you to enter various symbols
and special characters.
•Number mode
This mode allows you to enter numbers.
Entering Text
43
Changing the Text Input Mode
When you are in a field that allows characters to be
entered, you will notice the text input mode
indicator on the display.
Example: Writing a text message
To select the Press the right soft key
until
T9 mode displays.
See page 44.
Alphabet mode displays.
See page 46.
Symbol mode the symbol list displays.
See page 47.
Number mode displays.
See page 48.
918
Options
Text input
mode indicator
Edit Field
Entering Text
44
Using the T9 Mode
The T9 predictive text input mode allows you to key
in any character using single keystrokes. This text
input mode is based on a built-in dictionary.
To enter a word in the T9 mode:
1. When you are in the T9 mode, start entering a
word by pressing keys 2 to 9. Press each key
only once for one letter.
Example: To enter “HELLO” in the T9 mode,
press the 4, 3, 5, 5 and 6 keys.
The word that you are typing appears on the
display. It may change with each key that you
press.
2. Enter the whole word before editing or deleting
the keystrokes.
3. If the word is correct, start entering the next
word.
Otherwise, press the 0, Up or Down key
repeatedly to display alternative word choices
for the keys that you have pressed.
Example: Both “OF” and “ME” use the 6 and 3
keys. The phone displays the most
commonly used choice first.
4. Put a space between words by pressing the
key.
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the
word you want to add, press the 0 or Down key
to display the alternative words.
Entering Text
45
2. When you press the 0 or Down key at the last
alternative word, the display shows Add on the
bottom line. Press the Add soft key.
3. If necessary, clear the word using the C key and
enter the word you want to add using the
alphabet mode; see page 46.
4. Press the OK soft key.
The word is added to the T9 dictionary and
becomes the first word for the associated
keypress.
Note
: This feature may not be available for some
languages.
•To enter periods, hyphens or apostrophes, press
the 1 key. The T9 mode applies grammar rules to
ensure that the correct punctuation is used.
Example: The 1 key is used twice to display two
punctuation marks:
•To shift the case in the T9 mode, use the key.
There are three cases; Lower case (No indicator),
Initial Capital ( ) and Capital lock ( ).
•You can move the cursor by using the Left and
Right keys. To delete letters, press the C key.
Press and hold the C key to clear the display.
L E T ’ S E A T .
Entering Text
46
Using the Alphabet Mode
Use the 1 to 0 keys to enter your text.
1. Press the keys labelled with the required letter:
- Once for the first letter
- Twice for the second letter
- And so on
2. Select the other letters in the same way.
Note
: The cursor moves to the right when you press a
different key. When entering the same letter
twice or a different letter on the same key, just
wait for a few seconds for the cursor to move
to the right automatically, and then select the
next letter.
Refer to the table below for further details about the
characters available:
Characters in the Order Displayed
Key
Space
Upper Case Lower Case
Entering Text
47
•To insert a space, press the key.
•To shift the case in the alphabet mode, use the
key. There are three cases; Lower case (No
indicator), Initial Capital ( ) and Capital lock
( ).
•You can move the cursor by using the Left and
Right keys. To delete letters, press the C key.
Press and hold the C key to clear the display.
Using the Symbol Mode
The symbol mode enables you to insert symbols
into a text message.
To Press the
select a symbol corresponding number
key.
display more symbols Up or Down key.
insert the symbol(s)
into your message
OK soft key.
cancel your input and
return to the previous
mode
Back soft key.
OK Back
SYMBOL
Entering Text
48
Using the Number Mode
The number mode enables you to enter numbers
into a text message. Press the keys corresponding
to the digits you want to enter.
49
Options During a Call
Your phone provides a number of control functions
that you can use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if your network supports this
service. When you have an active call and a call on
hold, you may switch between the two calls,
changing the one on hold to active and placing the
other on hold.
To place a call on hold, simply press the Hold soft
key. You can reactivate the call whenever you want,
by pressing the Unhold soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or
look it up in Phonebook.
For details about searching for a number in
Phonebook, see page 35.
2. Press the key to dial the second call.
The first call is automatically put on hold.
Or,
1. Put the current call on hold by pressing the Hold
soft key.
2. Make the second call in the normal way.
Options During a Call
50
To switch between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other person.
When you want to finish, end each call normally by
pressing the key.
Searching for a Number in
Phonebook
You can search for a number in Phonebook during a
call.
1. Press the Options soft key.
2. Press the Down key to highlight the Phonebook
option.
3. Press the OK soft key.
The Phonebook entries are listed.
4. Enter the name that you wish to find.
If you enter the first few letters of the name, the
Phonebook entries are listed, starting with the
first entry matching your input.
5. To view the highlighted entry, press the View
soft key.
For further details about the Phonebook feature,
see page 31.
Options During a Call
51
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s
microphone off so that the other person cannot
hear you.
Example: You wish to say something to another
person in the room but do not want the
other person to hear you.
To switch the microphone off temporarily:
1. Press the Options soft key.
2. If necessary, press the Down key to highlight
the Mute option.
3. Press the OK soft key.
The other person can no longer hear you.
To switch the microphone back on:
1. Press the Options soft key.
2. If necessary, press the Down key to highlight
the Unmute option.
3. Press the OK soft key.
The other person can hear you again.
Options During a Call
52
Muting/Sending Key Tones
These options allow you to turn the key tones off or
on. If the Mute Keys option is selected, your phone
does not transmit the key tones, which allows you
to press keys without hearing annoying key tones
during a call.
Note
: To communicate with answering machines or
computerised telephone systems, the
Send
Keys
option must be selected.
Sending DTMF Tones
You can send the DTMF (dual tone multi-frequency)
tones of the number on the display during a call.
This option is helpful for entering a password or
account number when you call an automated
system, like a banking service.
To send the DTMF tones:
1. When you are connected to the teleservice
system, press the Options soft key.
2. Press the Down key to highlight the Send DTMF
option.
3. Press the OK soft key.
4. Enter the number you want to send and press
the OK soft key.
The tones of the displayed number are sent.
Options During a Call
53
Answering a Second Call
You can answer an incoming call while you have a
call in progress, if your network supports this
service and you have set the Call Waiting menu
(Menu 8.3) to Activate; see page 127. You are
notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press the key to answer the incoming call.
The first call is automatically put on hold.
2. To switch between the two calls, press the Swap
soft key.
3. To end the call on hold, press the Options soft
key and select the End Held Call option.
To end the current call, press the key.
Making a Multi-party Call
A multi-party call is a network service that allows
up to six people to take part simultaneously in a
multi-party or conference call. For more
information, contact your service provider.
Setting up the Multi-party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
3. To join the first participant to the multi-party
call, press the Options soft key and select the
Join option. Press the OK soft key.
Options During a Call
54
4. To add a new person to the multi-party call, call
the person in the normal way and press the
Options soft key. Select the Join option and
press the OK soft key.
You can add incoming callers by answering the call,
pressing the Options soft key, and selecting the
Join option. Repeat as required.
Having a Private Conversation With One
Participant
1. Press the Options soft key and choose the
Select One option. Press the OK soft key.
The list of call participants appears.
2. Highlight a person from the list by pressing
the Up or Down key, and press the Select soft
key or the key.
3. When the Private option highlights, press the
OK soft key.
Now you can talk privately with that person. The
other participants can still converse with each
other.
4. To return to the multi-party call, press the
Options soft key and select the Join option.
Press the OK soft key.
All the multi-party call participants can now hear
each other.
Options During a Call
55
Dropping One Participant
1. Press the Options soft key and choose the
Select One option. Press the OK soft key.
The list of call participants appears.
2. Highlight a person from the list by pressing
the Up or Down key, and press the Select soft
key or the key.
3. Press the Down key to select the Remove
option and press the OK soft key.
The call ends with that participant, but you can
continue to talk with the others.
4. When you want to end the multi-party call,
press the key.
56
Using the Menus
The phone offers a range of functions that allow you
to tailor it to your needs. These functions are
arranged in menus and sub-menus.
The menus and sub-menus can be accessed by
scrolling with the navigation keys or by using the
shortcuts.
Accessing a Menu Function by Scrolling
1. In Idle Mode, press the Menu soft key to access
Menu Mode.
2. Scroll with the Up or Down key to reach a main
menu, Phone Settings for example. Press the
Select soft key or the Right key to enter the
menu.
3. If the menu contains any sub-menus,
Language for example, you can access them by
scrolling with the Up or Down key and pressing
the Select soft key or the Right key.
If the menu that you have selected contains
further options, repeat this step.
4. To Press the
scroll through the
menus
Up or Down key, or use
the Volume keys on the
left side of the phone.
confirm the chosen
setting
Select soft key or the
Right key.
return to the previous
menu level
soft key or the Left
key.
exit the menu without
changing the settings
key.
Using the Menus
57
Accessing a Menu Function by Using
Its Shortcut
The menu items, such as menu, sub-menus and
options, are numbered and can be accessed quickly
by using their shortcut numbers. The shortcut
number is shown on the bottom right next to the
soft key on the display. Simply press the Menu soft
key and enter the number of the menu you want.
Note
: The numbers assigned to each menu are
indicated on the list on page 58. They may not
match the menu number on the phone,
depending on the services supported by your
SIM card.
Example: Accessing the Language menu.
1. Press the Menu soft key.
2. Press the 6 key for Phone Settings.
3. Press the 5 key for Language.
The languages available display.
List of Menu Functions
The following list shows the menu structure
available and indicates the number assigned to
each option and the page where you can find a
description of each feature.
Note
: If you use a SIM AT card that provides
additional services, the
SIM AT
menu displays
when you press the
Menu
soft key to enter
Menu Mode. For further details, see your SIM
card instructions.
Using the Menus
58
1. Text Messages
(see page 63)
1.1 Inbox
1.2 Outbox
1.3 Write New
1.4 Templates
1.5 Settings
1.5.1 Setting 1
*
1.5.2 Setting 2
*
1.5.3 Common Setting
1.6 Delete All
1.7 Memory Status
1.7.1 SIM Memory
1.7.2 Phone Memory
1.7.3 CB Memory
1.8 Voice Mail
1.8.1 Connect to Voice Server
1.8.2 Voice Server Number
1.9 Broadcast
1.9.1 Read
1.9.2 Receive
1.9.3 Channel List
1.9.4 Language
2. Picture Messages
(see page 75)
2.1 Inbox
2.2 Outbox
2.3 Draft
2.4 Write New
2.5 Templates
2.6 Delete All
2.7 Memory Status
* Shows only if supported by your SIM card.
Using the Menus
59
2. Picture Messages
(continued)
2.8 Setup
2.8.1 Delivery Report
2.8.2 Read Reply
2.8.3 Auto Download
2.8.4 Message Acceptance
2.8.5 Hide ID
2.8.6 Expiry Date
2.8.7 Delivery Time
2.8.8 Priority
2.8.9 Report Allowed
2.8.10 Page Duration
2.9 MMS Profile
3. Call Records
(see page 88)
3.1 Missed Calls
3.2 Received Calls
3.3 Dialled Calls
3.4 Delete All
3.5 Call Time
3.5.1 Last Call Time
3.5.2 Total Sent
3.5.3 Total Received
3.5.4 Reset Timers
3.6 Call Cost
*
3.6.1 Last Call Cost
3.6.2 Total Cost
3.6.3 Max Cost
3.6.4 Reset Counters
3.6.5 Set Max Cost
3.6.6 Price/Unit
4. Camera
(see page 92)
4.1 Take and Send
4.2 My Photo
4.3 Video
4.3.1 Record
4.3.2 Files
* Shows only if supported by your SIM card.
Using the Menus
60
5. Sound Settings
(see page 99)
5.1 Ring Tone
5.2 Ring Volume
5.3 Alert Type
5.4 Keypad Tone
5.5 Message Tone
5.5.1 SMS Tone
5.5.2 SMS-CB Tone
5.6 Sliding Tone
5.7 Power On/Off
5.8 Extra Tones
6. Phone Settings
(see page 104)
6.1 Infrared Activate
6.2 Display Settings
6.2.1 Wallpaper
6.2.2 Menu Style
6.2.3 Brightness
6.2.4 Back Light
6.2.5 Auto Light
6.2.6 Service Light
6.2.7 Graphic Logo
6.3 Greeting Message
6.4 Own Number
6.5 Language
6.6 Security
6.6.1 PIN Check
6.6.2 Change PIN
6.6.3 Phone Lock
6.6.4 Change Password
6.6.5 SIM Lock
6.6.6 FDN Mode
*
6.6.7 Change PIN2
*
6.7 Extra Settings
* Shows only if supported by your SIM card.
Using the Menus
61
6. Phone settings
(continued)
6.8 Short Cut
6.8.1 Key Up
6.8.2 Key Down
6.8.3 Key Right
6.8.4 Key Left
6.9 Reset Settings
7. Organiser
(see page 114)
7.1 Alarm
7.1.1 Once Alarm
7.1.2 Daily Alarm
7.1.3 Morning Call
7.1.4 Remove Alarm
7.1.5 Autopower
7.2 Calendar
7.3 Time & Date
7.3.1 Set Time
7.3.2 Set Date
7.3.3 World Time
7.3.4 Time Format
7.4 Calculator
7.5 To Do List
7.6 Currency Exchange
8. Network Services
(see page 123)
8.1 Call Diverting
8.1.1 Divert Always
8.1.2 Busy
8.1.3 No Reply
8.1.4 Unreachable
8.1.5 Cancel All
8.2 Call Barring
8.2.1 All Outgoing
8.2.2 International
8.2.3 International Except to Home
8.2.4 All Incoming
8.2.5 Incoming While Abroad
8.2.6 Cancel All
8.2.7 Change Barring Password
Using the Menus
62
8. Network Services
(continued)
8.3 Call Waiting
8.4 Network Selection
8.5 Caller ID
8.6 Closed User Group
8.6.1 Index List
8.6.2 Outside Access
8.6.3 Default Group
8.6.4 Deactivate
*
8.7 Band Selection
9. Funbox
(see page 132)
9.1 WAP Browser
9.1.1 Home
9.1.2 Favorite
9.1.3 http://
9.1.4 Settings
9.1.5 Clear Cache
9.1.6 Push Message
9.2 Games
9.3 Sounds
9.4 Images
9.5 Delete All
9.6 Memory Status
9.6.1 Games
9.6.2 Sounds & Images
* Shows only if the Closed User Group Feature is active.
63
Text Messages
Short Message Service (SMS) allows you to send
and receive short text messages to and from other
GSM mobile phones. In addition, your phone
supports the Enhanced Messaging Service (EMS),
which enables you to make messages including
simple pictures, melodies, and animation. To use
this feature, you must subscribe to the message
service of your service provider.
When the Message icon ( ) appears, you have
received new text messages. If the memory is full,
an error message displays and you cannot receive
any new messages. Use the Delete option in each
message box to delete the obsolete ones.
Inbox
(Menu 1.1)
This message box is used to store the messages
that you have received.
When you enter this menu, the list of messages in
the box displays with the senders’ phone numbers
or names, if available in your Phonebook.
1. Select a message from the list and press the
View soft key to read the message contents.
2. To scroll through the contents, press the Up or
Down key.
3. To scroll to the previous or next message, press
the or key.
Text Messages
64
While reading a message, you can choose the
following options by pressing the Options soft key:
Delete: allows you to delete the message.
Send: allows you to resend the message. For
further details about how to send a message, see
page 66.
Text Reply: allows you to reply to the sender by
sending a text message.
Call Back: allows you to call the sender back.
Cut Address: allows you to extract the destination
number and URL /e-mail addresses or phone
numbers from the message text, so that you can
save them in your phone’s memory.
Move to Phone: allows you to move the message
from the SIM card to the phone memory. This
option is only available when you select a message
stored in the SIM card.
Move to Sim: allows you to move the message
from the phone memory to the SIM card. This
option is only available when you select a message
stored in the phone memory.
Select Objects: allows you to save media objects,
such as sounds or images, from the message into
your phone. You can use the objects when writing a
message. For details, see page 68.
Text Messages
65
Outbox
(Menu 1.2)
This message box is used to store the messages
that you have already sent or will send.
When you enter this menu, the list of messages in
the box displays with the recipients’ phone numbers
or names, if available in your Phonebook.
1. Select a message from the list and press the
View soft key to read the message contents.
2. To scroll through the contents, press the Up or
Down key.
3. To scroll to the previous or next message, press
the or key.
While reading a message, you can choose the
following options by pressing the Options soft key:
Delete: allows you to delete the message.
Send: allows you to resend the message. For
further details about how to send a message, see
page 66.
Cut Address: allows you to extract the destination
number and URL /e-mail addresses or phone
numbers from the message text, so that you can
save them in your phone’s memory.
Move to Phone: allows you to move the message
from the SIM card to the phone memory. This
option is only available when you select a message
stored in the SIM card.
Move to Sim: allows you to move the message
from the phone memory to the SIM card. This
option is only available when you select a message
stored in the phone memory.
Text Messages
66
Select Objects: allows you to save media objects,
such as sounds or images, from the message into
your phone. You can use the objects when writing a
message. For details, see page 68.
Write New
(Menu 1.3)
In this menu, you can write and send a text
message.
Note
: When you add media objects to the message,
the number of characters you can enter
decreases.
Creating a Simple Text Message
1. Create your message.
Note
: For further details about entering
characters, see page 42.
2. When you finish entering the message, press
the Options soft key. The following options are
available:
• Send Only: allows you to send the message.
The message is deleted after sending.
• Save and Send: allows you to save a copy of
the message and then send the message. You
can read the message in your Outbox.
• Save Only: allows you to save the message
so that it can be sent later. You can read the
message in your Outbox.
• For further details about Text Formatting,
Add Objects, Add Templates, Add
Phonebook, Add Bookmark and Language
options, see page 67.
Text Messages
67
3. Select Send Only or Save and Send, and press
the Select soft key.
If you want to just save the message, select
Save Only. After saving the message, the
phone returns to the Text Messages menu.
4. If you select a save option, choose the memory
where the message is saved and press the OK
soft key.
5. Enter a destination number and press the OK
soft key.
The message is sent.
Note
: When the phone fails to send the message, it
will ask you if you want to retry. Press the
OK
soft key to confirm. Otherwise, press the
Exit
soft key to return to the Edit Field screen.
Creating a Message Using the Options
1. Create a message.
2. Press the Options soft key.
3. Select one of the following options by using the
Up and Down keys and pressing the Select soft
key:
• Text Formatting: allows you to format the
style of the text. For the Size attribute,
Normal, Large and Small sizes are available.
For the Underline and Strikethrough
attributes, select On or Off. These attributes
can be combined.
Text Messages
68
• Add Objects: allows you to add a sound,
melody, picture or animation to the message.
Select the category of the object to be added.
In each category, you can select the various
factory-set items or choose an item received
from other sources, such as the Internet or
other phones.
• Add Templates: allows you to apply one of
the preset message templates to the text.
Select one of five messages stored in the
Templates menu (Menu 1.4). For further
details, see page 69.
• Add Phonebook: allows you to add a
Phonebook entry to your message. Select one
from the list.
• Add Bookmark: allows you to add a web
page’s address stored in your Favorite list
(Menu 9.1.2). Select one from the list.
• Language: allows you to change the language
to be used in the T9 input mode. Select the
language to be used.
4. Complete the message, and send or save it by
following the procedure from Step 2 on page 66.
Text Messages
69
Templates
(Menu 1.4)
Using this menu, you can preset up to five
messages that you use most frequently.
Select an empty location or the message template
you want and press the Options soft key.
The following options are available:
Edit: allows you to write a new message or edit the
message.
Note
: For further details about how to enter
characters, see page 42.
Send Message: allows you to retrieve the
message. Once you have completed the message,
you can send, save and send, or simply save it. For
further details about how to send a message, see
page 66.
Delete: allows you to delete the message. You are
asked to confirm the deletion by pressing the Yes
soft key.
Settings
(Menu 1.5)
In this menu, you can set up default SMS
information. A setting group is a collection of
settings required to send messages. The number of
setting groups available depends on the capacity of
your SIM card.
Note
: The last setting you accessed is automatically
activated for sending messages.
Text Messages
70
Setting x (where x is the setting group number):
each group has its own sub-menu.
Service Centre: allows you to store or change the
number of your message centre, which is required
when sending messages. You must obtain this
number from your service provider.
Default Destination: allows you to store the default
destination number. The number automatically
displays on the Destination screen when you create
a message.
Default Type: allows you to set the default message
type to Text, Fax, Email or Paging. The network
can convert the messages into the selected format.
Default Validity: allows you to set the length of time
your text messages are stored at the message
centre while attempts are made to deliver them.
Setting Name: allows you to give a name to the
setting group currently being defined.
Common Setting: The following options are
available:
Reply Path: allows the recipient of your message to
send you a reply via your message centre, if your
network supports this service. To enable or disable
this option, press the On or Off soft key.
Delivery Reports: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether or not
your message has been delivered. To enable or
disable this option, press the On or Off soft key.
Bearer Selection: allows you to choose either GSM
or GPRS, depending on your network.
Text Messages
71
Delete All
(Menu 1.6)
This menu allows you to delete all of the text
messages in each message box. You can also delete
all of your messages at one time.
When a confirming message displays, press the Yes
soft key to confirm.
Memory Status
(Menu 1.7)
This menu shows how many messages are currently
stored in the SIM, phone and CB (cell broadcast)
memories.
To Press the
select a message
box to clear
Up or Down key. To delete
all of your messages,
select All Messages.
place a check mark Mark soft key.
remove a check
mark
Unmark soft key.
delete the marked
messages
Delete soft key.
Text Messages
72
Voice Mail
(Menu 1.8)
This menu provides you with a way of accessing
your voice mailbox, if your network supports this
service.
The following options are available:
Connect to Voice Server: before using this
feature, you must enter the voice server number
obtained from your service provider (see menu
option 1.8.2). You can then select a server number
from the list and press the OK soft key to listen to
your messages.
You can quickly connect to the voice server by
pressing and holding the 1 key in Idle Mode.
Voice Server Number: allows you to change the
voice mail server number, if necessary.
Note
: Voice Mail is a network feature. Please contact
your service provider for further details.
To Press the
enter the server
number
corresponding numeric
keys.
correct a digit C key.
move the cursor to the
left or right without
clearing a digit
Left or Right key.
Text Messages
73
Broadcast
(Menu 1.9)
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Cell Broadcast (CB) messages display as
soon as they are received, provided that:
• the phone is in Idle Mode.
• the Receive option is set to Enable.
• the message channel is currently active on the
channel list.
The following options are available:
Read: lets you view the received message. The
Volatile box displays the messages from the
network, but loses its contents as soon as the
phone is switched off. Scroll through the message
by using the Up and Down keys. While reading a
message, press the Save soft key to store the
message in the Archive box for later retrieval.
Receive: allows you to enable or disable the
reception of broadcast messages.
Channel List: allows you to indicate the channels
from which you wish to receive broadcast
messages. The following options are available:
Select: use to enable or disable channels on the list
by marking or unmarking them respectively. A
check mark displays in front of each selected
channel.
Add Channel: use to enter the ID and title for a new
channel.
Delete: use to remove a channel from the list.
Edit: use to change the ID and title of an existing
channel.
Text Messages
74
Language: allows you to select your preferred
language to display cell broadcast messages.
Please contact your service provider for further
details.
75
Picture Messages
Multimedia Message Service (MMS) is a messaging
service very similar to Short Message Service
(SMS). It provides automatic and immediate
delivery of personal multimedia messages from
phone to phone or from phone to e-mail.
In addition to the familiar text content of text
messages, multimedia messages can contain
images, graphics, voice and audio clips. An MMS
message is a multimedia presentation in a single
entry. It is not a text file with attachments.
Using the MMS feature, your phone can receive
multimedia messages. You can also send picture
messages, which are short messages that contain
images, such as your photos or graphics you
downloaded from the Internet. This function is
available only if it is supported by your service
provider. Only phones that offer picture message
features can receive and display picture messages.
Inbox
(Menu 2.1)
Viewing a Message When You Receive it
When a new multimedia message comes in, the
display shows a text notification along with the
sender’s number.
1. Press the View soft key to view the message.
The display shows brief information about the
message, such as the sender’s number, the
message size and the subject.
If you want to view the message later in the
Inbox, press the Exit soft key.
Picture Messages
76
2. To scroll through the message information,
press the Up or Down key.
While viewing the information, press the Options
soft key to use the following options:
Retrieve: retrieves the message from the MMS
server.
Delete: deletes the message.
More Information: shows you detailed
information about the message.
Viewing a Received Message in the Inbox
When you access the Inbox menu (Menu 2.1), the
list of multimedia messages you received displays
with the senders’ phone numbers, if they are
available in your Phonebook, or subjects. The icons
on the left tell you the status of the messages.
•: Messages you have already read.
•: Messages you haven’t read yet.
1. Select a message on the list and press the
Select soft key.
The display presents the message and scrolls to
the next page, if it has one, after a specified
time; for details about setting the time, see
page 86.
2. Press the OK soft key to go to the message view
screen.
Or, the display automatically switches to the
screen.
Picture Messages
77
3. To scroll through the message, press the Up or
Down key.
If the message has more than one page, you
can scroll through the pages by using the Left
and Right keys.
While viewing a message, you can choose the
Message options by pressing the Options soft key.
If you are viewing a new message, the options are
the same as when you view a message as soon as
you receive it. See the previous section.
When you are reviewing a message, the following
options are available:
Delete: deletes the message.
Reply: allows you to reply to the sender by sending
a text or picture message.
Callback: allows you to call the sender back.
Cut Address: allows you to extract the sender’s
number, so that you can dial the number or save it
in your Phonebook.
Forward: allows you to forward the message to
another person.
Save Picture: allows you to save an image from
the message into your phone. Images are stored in
the Images folder (Menu 9.4).
Save Sound: allows you to save a sound from the
message into the Sounds folder (Menu 9.3).
Information: shows you information about the
message, such as subject, sender’s address,
message size, status and priority.
Picture Messages
78
Outbox
(Menu 2.2)
When you access this menu, the list of the picture
messages you sent or saved displays. The icons on
the left tell you the status of the messages.
•: Messages currently being sent
•: Messages sent
•: Messages your phone couldn’t send
•: Messages to be sent
•: Messages deferred
1. Select a message on the list and press the
Select soft key.
The display presents the message and scrolls to
the next page, if it has one, after a specified
time; for details about setting the time, see
page 86.
2. Press the OK soft key to go to the message view
screen.
Or, the display automatically switches to the
screen.
3. To scroll through the message, press the Up or
Down key.
If the message has more than one page, you
can scroll through the pages by using the Left
and Right keys.
Picture Messages
79
While viewing a message, you can choose the
following options by pressing the Options soft key:
Delete: deletes the message.
Cut Address: allows you to extract the destination
numbers or addresses, so that you can dial a
number or save them in your Phonebook.
Send: allows you to resend the message.
Edit Message: allows you to change the message
contents, sound, picture or text.
Information: shows you information about the
message, such as subject, sender’s address,
message size, status and priority.
Draft
(Menu 2.3)
After creating a picture message, you can store it in
this message box for later sending. Or, if you are
interrupted while making a message by an
incoming call or message, your message is
automatically saved in this box.
For further details about viewing a message, see
“Outbox” on page 78.
Picture Messages
80
Write New
(Menu 2.4)
This menu allows you to create a new picture
message and then send it to multiple destinations.
Creating and Sending a Picture Message
1. Enter the subject of your message and press the
OK soft key.
For further details about entering characters,
see page 42.
2. When Add Here highlights, press the Options
soft key and add the message contents using
one of the following options:
• Add Text: enter the message text and press
the OK soft key.
• Add My Photo: allows you to add a photo you
took using the camera on your phone. Select a
photo and press the View soft key. Then,
press the Select soft key to add. For further
details about using the camera, see page 92.
• Add Picture: allows you to add a picture
stored in the Images folder (Menu 9.4).
Choose a picture and press the Select soft
key.
• Add Sound: allows you to add a sound file in
the Sounds folder (Menu 9.3). Some
downloaded sounds may not be added
depending on their file format.
• Send: allows you to send the message. Use
this option when you finish creating the
message. This option is activated after you
add content to the message.
Picture Messages
81
• Save: saves the message in the Draft (Menu
2.3) or Templates (Menu 2.5) box for later
use. This option is activated after you add
content to the message.
• Settings: allows you to change the message
settings. For further details about each setting
option, see page 86. After changing the
settings, you need to press the soft key or
the C key to go to back to the options screen.
• Add Destination: allows you to enter
destination numbers or addresses. See steps 7
to 12 starting from page 82. After adding
them, you need to press the soft key or the
C key to go to back to the option screen.
• Preview: shows your message as it will
display on the recipient’s phone.
Note
: You can add text, an image and a sound
once for each page.
3. When the added content displays, press the
Down key to highlight Add Here.
4. Repeat steps 2 and 3 until you finish creating
your message.
5. If you want to change the added items, press
the Up or Down key to highlight one and press
the Options soft key. The following options are
available:
• Edit Text/Picture/Sound: allows you to
change text or replace the image or sound
with another one.
• Add Page: allows you to add more pages. You
can move to each page using the Left or Right
key when Page highlights on the message
screen.
• Delete: deletes the item from your message.
Picture Messages
82
• Duration: allows you to set how long text, an
image or a sound displays on the message
presentation screen. After a specified time, the
display scrolls to the next item and then
continues to the next page.
• Send: allows you to send the message.
• Save: saves the message in the Draft (Menu
2.3) or Templates (Menu 2.5) box for later
use.
• Settings: allows you to change the message
settings. For further details about each setting
options, see page 86.
• Add Destination: allows you to enter
destination addresses. See steps 7 to 12.
• Preview: shows your message as it will
display on the recipient’s phone.
Note
: The options available are different
depending on the item you select on the
message screen.
6. When you are finished creating the message,
choose Send from the options and press the
Select soft key.
7. Select To, Cc or Bcc to enter a destination
number or address and press the Select soft
key.
8. Choose one of the following options and press
the Select soft key:
• Phone Number: allows you to enter the
phone number you want.
• E-Mail: allows you to enter the e-mail address
of the recipient to send the message as an
e-mail.
• Phone Book: allows you to retrieve a number
from your Phonebook.
Picture Messages
83
9. Enter a number or an e-mail address, or select
a number in Phonebook.
10. When the correct number or address displays,
press the OK soft key.
11. To add a destination, press the Select soft key
when Add Destination highlights. Repeat from
step 8.
If you want to edit the destinations, select one
and press the Select soft key. You can change
or delete it.
12. When you are finished adding the destinations
to the type, press the C key or the soft key.
13. To enter numbers or addresses, repeat steps 7
through 12.
You can enter up to 10 destinations for To, CC
and Bcc.
14. When you are finished entering the
destinations, select Send Message and press
the Select soft key on the Picture Msg Send
screen.
Your phone sends the message.
Picture Messages
84
Templates
(Menu 2.5)
This menu stores messages you saved as templates
so that you can use them to make new messages.
1. Scroll through the template list using the Up and
Down keys.
2. When the message template you want
highlights, press the Select soft key.
3. Press the OK soft key to use the following
options, or the display automatically shows the
options after a specified time:
• Edit Message: allows you to send a message
using the template. For further details about
how to send a message, see page 80.
• Delete: allows you to delete the message. You
are asked to confirm the deletion by pressing
the Yes soft key.
4. Press the key to return to Idle Mode.
Picture Messages
85
Delete All
(Menu 2.6)
This menu allows you to delete all of the picture
messages in each message box. You can also delete
all of your messages at one time.
When a confirming message displays, press the Yes
soft key to confirm.
Memory Status
(Menu 2.7)
You can check the memory status for picture
messages. The display shows the total space,
including the free and used space. It also shows
how much space is currently occupied by each
message box.
To Press the
select a message
box to clear
Up or Down key. To delete
all of your messages,
select All Messages.
place a check mark Mark soft key.
remove a check
mark
Unmark soft key.
delete the marked
messages
Delete soft key.
Picture Messages
86
Setup
(Menu 2.8)
You can change the default settings for sending or
receiving picture messages.
The following options are available:
Delivery Report: when this option is enabled, the
network informs you whether or not your message
has been delivered.
Read Reply: when this option is enabled, your
phone sends a request for a reply along with your
message to the recipient.
Auto Download: you can set whether or not your
phone retrieves new incoming messages from the
MMS server without notifications.
Message Acceptance: you can specify the
category of messages you want to receive.
Hide ID: when this option is enabled, your phone
number does not display on the recipient’s phone.
Expiry Date: you can select the length of time
your messages are stored at the message centre
after they are sent.
Delivery Time: you can set the delay time before
the phone sends your messages.
Priority: you can select the priority level of your
messages.
Report Allowed: when this option is disabled, the
sender of an incoming message does not receive a
delivery report from the network.
Page Duration: you can set how long one page of
the received message displays on the message
presentation screen. After a specified time, the
display automatically scrolls to the next page.
Picture Messages
87
MMS Profile
(Menu 2.9)
In this menu, you can configure various network
settings that are required when you send or receive
multimedia messages.
Notes:
• The last profile you accessed is automatically
activated for sending messages.
• In most cases, you don’t need to change these
settings. If you change them without the service
provider’s instruction, the MMS feature may not
work properly.
The following options are available for each profile:
Profile Name: enter a name that you wish to
assign to the MMS server.
Connection URL: enter the address of your MMS
server.
Security: select a data transmission mode. Choose
Secure to protect your data against unauthorised
access; otherwise, choose Non-Secure.
IP Address: enter the gateway address required to
connect to the MMS server.
User-Name: enter the user ID required to connect
to the MMS server.
Password: enter the password required to connect
to the MMS server.
APN: enter the access point name used for the
address of the MMS server.
For further details, contact your service provider.
88
Call Records
In this menu, you can view the:
• calls you missed, received or dialled.
• length of your calls.
• cost of your calls.
Notes
:
• You can access the numbers in the three types of call
records by pressing the key in Idle Mode.
• The number of call records the phone can store may
be different depending on your SIM card.
Missed Calls
(Menu 3.1)
This menu lets you view the last 20 numbers of the
calls you received, but did not answer.
The number and name, if available, display
together with the date and time when the call was
received.
By pressing the Options soft key, you can:
•edit the number, if available, and dial it or save it
in Phonebook.
• delete the call from the list.
You can also dial the number by pressing the
key.
Call Records
89
Received Calls
(Menu 3.2)
This menu lets you view the last 20 numbers of the
calls you received.
The number and name, if available, display
together with the date and time when the call was
received.
By pressing the Options soft key, you can:
•edit the number, if available, and dial it or save it
in Phonebook.
• delete the call from the list.
You can also dial the number by pressing the
key.
Dialled Calls
(Menu 3.3)
This menu lets you view the last 20 numbers you
dialled.
The number and name, if available, display
together with the date and time when the call was
made.
By pressing the Options soft key, you can:
• edit the number and dial it or save it in
Phonebook.
• delete the call from the list.
You can also dial the number by pressing the
key.
Call Records
90
Delete All
(Menu 3.4)
This menu allows you to delete all of the records in
each call type. You can also delete all of your call
records at one time.
When a confirming message displays, press the Yes
soft key to confirm.
Call Time
(Menu 3.5)
This menu lets you view the timers for calls made
and received.
Note
:
The actual time invoiced for calls by your
service provider may vary, depending on
network features, rounding-off for billing
purposes and so on.
The following timers are available:
Last Call Time: length of the last call.
Total Sent: total length of all calls made since the
timer was last reset.
To Press the
select a call type to
clear
Up or Down key. To delete
all of your call records,
select All Calls.
place a check mark Mark soft key.
remove a check mark Unmark soft key.
delete the marked
messages
Delete soft key.
Call Records
91
Total Received: total length of all calls received
since the timer was last reset.
Reset Timers: option used to reset the call timers.
You must first enter the phone password (see
page 146) and then press the OK soft key.
Call Cost
(Menu 3.6)
This network feature lets you view the cost of calls.
This menu may not be shown depending on your
SIM card.
The following options are available:
Last Call Cost: cost of the last call made.
Total Cost: total cost of all calls made since the
cost counter was last reset. If the total cost exceeds
the maximum cost set in the Set Max Cost option,
you can no longer make any calls until you reset the
counter.
Max Cost: maximum cost set in the Set Max Cost
option. See below.
Reset Counters: option used to reset the cost
counter. You must first enter your PIN2 (see
page 148) and then press the OK soft key.
Set Max Cost: option used to enter the maximum
cost that you authorise for your calls. You must first
enter your PIN2 (see page 148) and then press the
OK soft key.
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls. You must first enter your PIN2
(see page 148) and then press the OK soft key.
92
Camera
Using the camera module embedded in your phone,
you can take pictures of people or events while on
the move. Additionally, you can send photos to
other people in a multimedia message.
You can also record videos using the camera like a
camcoder.
Take and Send
(Menu 4.1)
This menu allows you to take a picture. The camera
produces JPEG pictures.
Note
: When you take a picture in direct sunlight or
under too bright illumination, shading may
occurs on the picture.
1. Access the Take and Send menu to turn on the
camera on the top left of the phone.
The image to be captured appears on the
display.
2. Adjust the image by rotating the camera module
and aiming it to the subject.
Camera
93
• Use the Up and Down keys to adjust the
brightness of the image.
• Use the Left and Right keys to adjust the
image size; the Left key changes the display
size and the Right key enlarges or reduces the
image.
• Use the Volume keys on the left side of the
phone to flip the image; the key flips the
picture as a mirror image and the key flips
vertically.
• To turn the flash on or off, press the 1 key.
• To use the camera options, press the Options
soft key. For details, see page 94.
3. Press the Take soft key to take the picture.
4. Press the Save soft key.
5. Enter a name for your picture.
For further details about entering characters,
see page 42.
6. Press the
OK
soft key to save the picture.
7. To Press the
use the camera
options
Options soft key. For
further details, see the
next page.
return to the capture
mode
Cancel soft key or C
key.
return to the idle
screen
key.
Camera
94
When you press the Options soft key after saving a
picture, the following options are available:
Send via MMS: allows you to send the picture
using a multimedia message. For further details,
see page 80.
Set This Photo as: allows you to set the picture as
your wallpaper for the idle screen or power on or off
image.
Protection: allows you to set the picture not to be
deleted.
Delete This: deletes the picture.
Using the Camera options
In the capture mode, you can use various options
by pressing the Options soft key.
The following options are available:
Effect: allows you to change the colour tone or
apply special effects to the picture. When you select
an option, the display shows your setting and
prompts you to confirm it. Press the Yes soft key.
Frame: allows you to use the frame. Select a frame
from the list. Press the View soft key to check the
selected frame or the Select soft key to use it.
To Press the
scroll to an option Up or Down key.
select the highlighted
option
Select soft key or the
Right key.
return to the capture
mode
Back soft key or C key.
Camera
95
Multi-Shot: allows you to take action stills. Select
High Speed or Normal Speed to use this option.
When you press the Take soft key, the camera
takes up to nine pictures successively.
Rotation: rotates the picture. You can reverse the
picture as a mirror image or flip the picture
vertically.
Self Timer: allows you to have a delay time. Select
the length of time you want. When you press the
Take soft key, the camera takes the picture after a
specified time.
Picture Size: allows you to select a picture size.
The higher the value, the higher the image quality
and larger the file size.
Image Quality: allows you to change the image
quality.
Mode Initialization: when this option turns on,
your settings of the camera options are reset to the
default status each time you turn the camera off
and back on.
My Photo
(Menu 4.2)
This menu allows you to review your pictures.
When you access this menu, the display shows the
latest picture on the full screen. Use the Left and
Right keys to scroll through the pictures.
To change the view mode, press the right soft key,
labelled with the following modes:
Properties: shows the properties about the picture
with the thumbnail image.
Camera
96
2x2: shows four thumbnail images on one screen.
3x3: shows nine thumbnail images on one screen.
View: shows a picture on the full screen.
Note
: Once you have changed the view mode, it is
saved for the next access.
Press the Options soft key to use the following
options:
Send via MMS: allows you to send the photo as a
multimedia message. For further details, see
page 80.
Set This Photo as: allows you to set the picture as
your wallpaper for the idle screen or power on or off
image.
Protection: allows you to set the picture not to be
deleted.
Delete This: deletes the picture.
Delete All: deletes all of the pictures saved in your
phone.
Rename: allows you to change the name of the
picture.
Edit: allows you to change the image effect, frame,
rotation and brightness of the picture.
View Properties: shows the properties of the
picture, such as date and time it was taken, file
size, image size, protection status, file format and
file name.
Camera
97
Video
(Menu 4.3)
You can record a video that is currently displayed
on the camera screen and save it as a video file.
Record
(Menu 4.3.1)
1. Press the Rec soft key to start recording.
If you want to use the video options before
recording, press the Options soft key. For
details, see below.
2. When you are finished, press the Stop soft key.
Or, the phone automatically stops when the
recording time expires.
3. Enter a name for the video file.
For further details about entering characters,
see page 42.
4. Press the OK soft key.
The video is saved.
Using the Video Options
When you press the Options soft key before
starting recording, the following options are
available:
(The options are not available on the current
phone!!!)
Camera
98
Files
(Menu 4.3.2)
When you access this menu, the first video you
recorded displays.
To play back a video:
1. Press the Left or Right key to scroll to the video
you want to view.
2. Press the Play soft key to start the playback.
Press the Options soft key to use the following
options:
Rename: allows you to change the file name.
Delete This: deletes the current video file.
Delete All: deletes all of your video files.
Protection: allows you to set the video file not to
be deleted.
3. To Press the
stop the playback Stop soft key.
restart the playback C key.
return to the idle
screen
key.
99
Sound Settings
You can use the Sound Settings feature to
customise various settings, such as the:
• ring melody, volume and type.
• sounds made when you press a key, receive a
message, slide the folder or switch your phone
on/off.
•alert tone made every minute during a call, when
you make an error or when your call is connected
to the system.
Note
: When the phone is in Silent Mode (see
page 28), you cannot change the sound
settings.
Ring Tone
(Menu 5.1)
This menu allows you to select a ring melody.
You can choose between many different melodies.
Each time you select a melody, it plays for a few
seconds. If you have downloaded sounds from the
Internet or EasyGPRS programme, you can use
them in this menu.
Ring Volume
(Menu 5.2)
This menu allows you to adjust the ring volume to
one of five levels.
Use the Up and Down keys or the Volume keys on
the left side of the phone to increase or decrease
the volume.
Sound Settings
100
Alert Type
(Menu 5.3)
This menu allows you to specify how you are to be
informed of incoming calls.
The following options are available:
Light Only: the service light flashes; the phone
neither rings nor vibrates.
Melody: the phone rings using the ring melody
selected in the Ring Tone menu (Menu 5.1); see
page 99.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three
times and then starts ringing.
Keypad Tone
(Menu 5.4)
This menu allows you to select a tone that the
phone sounds when you press a key.
To turn the sound off, select Off.
Sound Settings
101
Message Tone
(Menu 5.5)
This menu allows you to select how the phone
informs you that a new message has been received.
SMS Tone
(Menu 5.5.1)
This menu allows you to select how the phone
informs you that a new SMS message has been
received.
The following options are available:
Off: the phone does not use the SMS tone.
Light Only: the service light flashes.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
SMS Tonex: the phone uses one of several SMS
tones.
SMS-CB Tone
(Menu 5.5.2)
This menu allows you to select how the phone
informs you that a new cell broadcast (CB) message
has been received.
The following options are available:
Off: the phone does not use the CB tone.
Light Only: the service light flashes.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
SMS-CB Tonex: the phone uses one of several CB
tones.
Sound Settings
102
Sliding Tone
(Menu 5.6)
This menu allows you to select a tone that the
phone sounds when you slide the folder up or down.
To turn the sound off, select Off.
Power On/Off
(Menu 5.7)
This menu allows you to select a melody that the
phone sounds when it is switched on and off.
To turn the sound off, select Off.
Extra Tones
(Menu 5.8)
You can customise additional tones used for the
phone.
The following options are available:
Error Tone: sets whether or not the phone informs
you when you make a mistake.
To turn a given
tone
Press the
on On soft key.
A check mark displays in
front of the option.
off Off soft key again.
The check mark no longer
displays.
Sound Settings
103
Minute Minder: sets whether or not the phone
beeps every minute during an outgoing call to keep
you informed of the length of your call.
Connect Tone: sets your phone to beep when your
call is connected to the system.
104
Phone Settings
Many different features of your phone can be
customised to suit your preferences. All of these
features are accessed in the Phone Settings
menu.
Infrared Activate
(Menu 6.1)
This feature allows you to send or receive data
through the infrared port. To use an infrared
connection, you must:
•configure and activate an IrDA-compliant infrared
port on your PC.
• activate the infrared feature on the phone; the
IrDA icon ( ) appears on the top line of the
display.
• align the IrDA port on the phone with the IrDA
port on your computer.
The connection is ready for data transmission.
If there is no communication between your phone
and the IrDA-compliant device within 30 seconds of
activating the feature, it is automatically
deactivated.
Note
: For the best performance, use the data link
cable supplied in your SGH-D410 kit.
IrDA port
IrDA port
Phone Settings
105
Display Settings
(Menu 6.2)
In this menu, you can change various settings for
the display or backlight.
Wallpaper
(Menu 6.2.1)
This menu allows you to change the background
image or the colour of the text to be displayed in
Idle Mode.
The following options are available:
Wallpaper List: you can select a background
image to be displayed on the idle screen.
To change the background image:
1. Scroll through the list by pressing the Up or
Down key.
You have various preset images available. You
can also select the blank background and any
images downloaded from the Internet and the
EasyGPRS programme or received by messages.
Once you have set a photo as the wallpaper, it
displays as My Photo.icn on this list.
2. Press the Select soft key when the image you
want highlights.
3. When the image displays, press the Select soft
key to display it on the idle screen.
Text Display: you can specify whether or not the
phone displays the text, such as the date and time
and the service provider’s name.
Text Color: you can select a colour of the text to
be displayed on the idle screen.
Phone Settings
106
Menu Style
(Menu 6.2.2)
This menu allows you to select the menu display
style. You can choose either Film Style or Page
Style.
Brightness
(Menu 6.2.3)
This menu allows you to adjust the brightness of
the display screen to see it better in different
lighting conditions.
Adjust the brightness by using the Up and Down
keys or the and keys on the left side of the
phone.
Back Light
(Menu 6.2.4)
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off.
Select the length of time the backlight is on. The
backlight turns on when you press a key or receive
a call or message and remains on for the specified
length of time.
If you do not want to use the backlight, select Off.
Phone Settings
107
Auto Light
(Menu 6.2.5)
This feature helps you to conserve your battery
power by allowing you to set the backlight to be
used at certain times.
The following options are available:
Disable: the backlight is used according to your
setting in the Back Light menu (Menu 6.2.4); see
page 106.
Enable: the backlight is used only during the
specified period of time. Enter the time when the
phone turns the light on and then turns it off, using
the appropriate number keys.
Service Light
(Menu 6.2.6)
This menu allows you to select whether or not the
service light is used or in which colour it flashes.
Select one of the seven colour settings. When the
phone is ready for use, the service light flashes in
the appropriate colour.
If you do not wish to use the service light,
select Off.
Graphic Logo
(Menu 6.2.7)
This menu allows you to display your service
provider’s logo instead of its name.
Off: the service provider’s name displays in Idle
Mode.
On: the service provider’s logo stored in your
phone displays in Idle Mode; if no logo has been
stored, the service provider’s name displays.
Phone Settings
108
Greeting Message
(Menu 6.3)
This menu allows you to set a greeting to be
displayed briefly when the phone is switched on.
For further details about how to enter characters,
see page 42.
Own Number
(Menu 6.4)
This feature allows you to:
• assign a name to each of your own phone
numbers registered on your SIM card.
• edit the names and numbers.
This function is a memory aid, which you can use to
check your own phone numbers if you need to do so.
Any changes made here do not in any way affect
the actual subscriber numbers on your SIM card.
To Press the
clear the existing
message
C key and hold it down until
the message is cleared.
enter a new
message
appropriate alphanumeric
keys.
change the text
input mode
right soft key.
Phone Settings
109
Language
(Menu 6.5)
You can select a display language. When the
language option is set to Automatic, the language
is automatically selected according to the language
of the SIM card used.
Security
(Menu 6.6)
The Security feature enables you to restrict the use
of your phone to the people and the types of calls of
your choice.
Various codes and passwords are used to protect
the features of your phone. They are described in
the following sections. Also see pages 146-149.
PIN Check
(Menu 6.6.1)
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
Note
: Before disabling the PIN Check feature, you
must enter your PIN.
To change your PIN, see the Change PIN menu
(Menu 6.6.2) on the following page.
The following options are available:
Disable: the phone connects directly to the
network when you switch it on.
Enable: you must enter the PIN each time the
phone is switched on.
Phone Settings
110
Change PIN
(Menu 6.6.2)
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature
is enabled. You must enter the current PIN before
you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone Lock
(Menu 6.6.3)
When the Phone Lock feature is enabled, the phone
is locked and you must enter the 8-digit phone
password each time the phone is switched on.
The password is preset to “00000000” at the
factory. To change the phone password, see the
Change Password menu (Menu 6.6.4) below.
Once the correct password has been entered, you
can use the phone until you switch it off.
The following options are available:
Disable: you are not asked to enter the phone
password when you switch the phone on.
Enable: you are required to enter the phone
password when you switch the phone on.
Change Password
(Menu 6.6.4)
The Change Password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
The password is preset to “00000000” at the
factory. Once you have entered a new password,
you are asked to confirm it by entering it again.
Phone Settings
111
SIM Lock
(Menu 6.6.5)
When the SIM Lock feature is enabled, your phone
only works with the current SIM. You must enter
the SIM lock code.
Once you have entered the lock code, you are
asked to confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock
code.
FDN Mode
(Menu 6.6.6)
The FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
The following options are available:
Disable: you can call any number.
Enable: you can only call phone numbers stored in
Phonebook. You must enter your PIN2.
Note
: Not all SIM cards have a PIN2. If your SIM card
does not, this menu is not displayed.
To change your PIN2, see the Change PIN2 menu
(Menu 6.6.7) below.
Change PIN2
(Menu 6.6.7)
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
Note
: Not all SIM cards have a PIN2. If your SIM card
does not, this menu is not displayed.
Phone Settings
112
Extra Settings
(Menu 6.7)
You can turn the automatic redialling or answering
features on or off.
The following options are available:
Auto Redial: when this option is checked, the
phone makes up to ten attempts to redial a phone
number after an unsuccessful call.
Note
: The interval between two call attempts varies.
Active Folder: when this option is checked, you
can simply slide the folder up to answer a call.
When it is unchecked, you must press a key,
depending on the setting of the Anykey Answer
option. See below.
Anykey Answer: when this option is checked, you
can answer an incoming call by pressing any key,
except the key and the Reject soft key. To
reject the call, press the key or the Reject
soft key.
When this option is unchecked, you can only press
the key or Accept soft key.
To turn a feature Press the
on On soft key.
A check mark displays in
front of the option.
off Off soft key.
The check mark no longer
displays.
Phone Settings
113
Short Cut
(Menu 6.8)
The navigation keys can be used as shortcut keys.
In Idle Mode, they allow you to access specific
menus directly.
To assign a shortcut to a key:
1. Select the key to be used as a shortcut key by
pressing the Up or Down key, and press the
Select soft key.
• Key Up
• Key Down
• Key Right
• Key Left
2. Select the menu to be assigned to the key by
pressing the Up or Down key.
Note
: To deactivate a shortcut key, select the
None
option.
3. Press the Select soft key to save the selection.
Reset Settings
(Menu 6.9)
You can easily reset your phone to its default
settings. To reset your phone:
1. Select the Reset Settings menu.
2. Enter the 8-digit phone password and press the
OK soft key.
Note
: The password is preset to “00000000.” To
change this password, see page 110.
114
Organiser
The Organiser feature enables you to:
•set an alarm so that the phone rings at a specific
time, such as to remind you of an appointment.
• view the calendar and organise your schedule.
• set the current date and time.
• define a list of things to do.
• use the phone as a calculator for basic
mathematical equations or currency exchange
operations.
Alarm
(Menu 7.1)
This feature allows you to:
• set the alarm to ring at a specific time.
•set the phone to switch on automatically and ring
the alarm even if the phone is switched off.
The following options are available:
Once Alarm: the alarm rings only once and is then
deactivated.
Daily Alarm: the alarm rings every day at the
same time.
Morning Call: the alarm rings to wake you up in
the morning.
To set an alarm:
1. Choose the type of alarm to be set and press the
Select soft key.
Organiser
115
2. Enter the time for the alarm to sound.
Note
: Your phone is preset to use 24-hour format.
To change the format, see page 118.
If you want to use the alarm options, press the
Options soft key. The following options are
available:
• Remove Alarm: deactivates the current
alarm.
• Alarm Sound Set: allows you to select the
alarm melody.
3. Press the OK soft key.
4. If you select Morning Call in Step 1, choose the
repeat option, Monday to Friday or Monday
to Saturday, and press the Select soft key.
To stop the alarm when it rings, press the Exit soft
key.
Remove Alarm: deactivates all alarm settings.
Autopower: when this option is set to Enable, the
alarm rings at the specified time, even if the phone
is switched off.
If the menu option is set to Disable and the phone
is switched off at the specified time, the alarm does
not ring.
Calendar
(Menu 7.2)
With the Calendar feature, you can:
• consult the calendar to check your memos.
•write memos to keep track of your schedule.
• trigger an alarm, if necessary.
Organiser
116
Consulting the Calendar
When you select the Calendar menu (Menu 7.2),
the calendar displays. The following options are
available when you press the Options soft key:
Search All: displays all of the memos, starting with
the oldest regardless of the day. To scroll through
the memos, press the Up or Down key.
Delete All: allows you to delete all of the memos.
You are asked to confirm your action.
Go to Date: allows you to go to a specific date.
Exit: exits the Calendar feature and returns to Idle
Mode.
Writing a Memo
You can make up to 30 memos for one day.
To write or edit a memo on a specific date:
1. Select a date on the calendar, using the
navigation keys.
Note
: To skip to the previous or next month,
press
the or key
on the left side of the
phone.
2. Press the Select soft key.
An empty memo screen displays allowing you to
enter your memo.
3. Enter your memo and then press the OK soft
key.
Note
: For further details about how to enter
characters, see page 42.
You are asked if you wish to set an alarm.
Organiser
117
4. If you want an alarm to ring on the chosen day,
press the Yes soft key.
Otherwise, press the No soft key. The memo is
saved.
5. If you pressed the Yes soft key, enter the time
for the alarm and press the OK soft key.
You can also select the melody for the alarm by
pressing the Melody soft key.
The colour of the date on the calendar changes to
green to indicate that a memo exists.
Viewing a Memo
When you select a day for which a memo already
exists on the calendar, the latest memo for the day
displays.
If more than one memo is stored, press the Up or
Down key to scroll to the previous or next memo.
Press the New soft key to add a new memo to the
day.
You can use the following options by pressing the
Options soft key:
Edit: allows you to change the memo text.
Alarm: allows you to set an alarm to ring at the
specified time to inform you of the memo. If you set
the alarm earlier, you can change or delete it.
Delete: allows you to delete the memo.
Copy to: allows you to copy the memo to another
date.
Move to: allows you to change the date of the
memo.
Organiser
118
Time & Date
(Menu 7.3)
This menu allows you to change the current time
and date displayed. You can also use this option to
find out what time it is in another part of the world.
The following options are available:
Set Time: allows you to enter the current time. You
can choose the time format in the Time Format
menu (Menu 7.3.4). See below.
Note
: Before setting the time, you must specify your
time zone, in the
World Time
menu (
Menu
7.3.3
).
Set Date: allows you to enter the day, month and
year.
World Time: allows you to find out what time it is
in another part of the world, using the Left and
Right keys.
The screen shows the:
• city name.
• current date and time.
• time difference between the selected city and
your city if you have set the local time (see below
for further details) or GMT (by default).
To select your time zone:
1. Select the city corresponding to your time zone
by pressing the Left or Right key one or more
times.
The local date and time display.
2. Press the Set soft key.
Time Format: allows you to change the time
format to
24 Hours
or 12 Hours.
Organiser
119
Calculator
(Menu 7.4)
With this feature, you can use the phone as a
calculator. The calculator provides the basic
arithmetic functions; addition, subtraction,
multiplication and division.
1. Enter the first number using the numeric keys.
Notes
:
• To delete mistakes or clear the display, press the
C
key.
• To include a decimal point or a bracket, press the
left soft key until the symbol you want displays.
2. Press the right soft key until the required
arithmetic symbol appears: + (addition),
- (subtraction), (multiplication), / (division).
3. Enter the second number.
4. To view the result, press the key.
5. Repeat steps 1 to 4 as many times as required.
To Do List
(Menu 7.5)
This feature allows you to:
• enter a list of tasks to be done.
• assign a priority and a deadline to each task.
• sort the tasks by priority and status mark.
Creating the To Do List
1. Press the New soft key.
Organiser
120
2. Enter the first task.
Note
: For further details about how to enter
characters, see page 42.
3. Press the OK soft key.
4. Select high, normal or low priority using the Up
and Down keys and press the Select soft key.
5. Enter your deadline and press the OK soft key.
If you do not want to set a deadline, press the
Skip soft key.
Editing the To Do List
When you select the To Do List menu (Menu 7.5),
the current contents display with the status mark
and priority; for High, for Normal and
for Low.
To view the
details for a
specific task
➀ highlight the task.
➁ press the View soft key.
➂ scroll through the tasks using
the Up and Down keys, if
necessary.
To change the
status of a
specific task
➀ highlight the task.
➁ press the key to mark the
task as completed as of the
current date and time.
or
➀ highlight the task.
➁ press the Options soft key.
➂ select the Mark option.
➃ select the appropriate status
(Done or Undo).
Organiser
121
To create a new
task
➀ press the Options soft key.
➁ select the New option.
➂ enter the text, priority and/
or deadline for the task.
To edit an
existing
task
➀ highlight the task.
➁ press the Options soft key.
➂ select the Edit option.
➃ change the text, priority and/
or deadline for the task, as
required.
To sort the
existing
tasks by priority
or status
➀ press the Options soft key.
➁ select the Sort option.
➂ select the sort criterion
(High, Low, Done or
Undo).
To copy a task ➀ highlight the task.
➁ press the Options soft key.
➂ select the Copy option.
➃ change the text, priority and/
or deadline for the task, as
required.
To copy a task to
the calendar
➀ highlight the task.
➁ press the Options soft key.
➂ select the Copy to Calendar
option.
➃ change the text and deadline
for the task and set the
alarm, as required.
To delete a task ➀ highlight the task.
➁ press the Options soft key.
➂ select the Delete option.
Organiser
122
Currency Exchange
(Menu 7.6)
Using this menu, you can make currency
conversions.
1. Enter the current exchange rate of your source
currency and press the
OK
soft key.
You can insert a decimal point by pressing
the key
.
2. Enter the amount to convert and press the OK
soft key.
The amount you entered and its equivalent
value display.
3. Press the Exit soft key to exit the currency
convertor.
To delete all
tasks
➀ press the Options soft key.
➁ select the Delete All option.
➂ confirm the deletion by
pressing the OK soft key.
To exit the To Do
list
➀ press the Options soft key.
➁ select the Exit option.
123
Network Services
These menu functions are network services. Please
contact your service provider to check their
availability and subscribe to them, if you wish.
Call Diverting
(Menu 8.1)
This network service enables incoming calls to be
rerouted to the number that you specify.
Example:You may wish to divert your business calls
to a colleague while you are on holiday.
Call diverting can be set up in the following ways:
Divert Always: all calls are diverted.
Busy: calls are diverted when you are already on
another call.
No Reply: calls are diverted when you do not
answer the phone.
Unreachable: calls are diverted when you are not
in an area covered by your service provider.
Cancel All: all call diverting options are cancelled.
You can specify individual diverting options for each
of the following call types:
•Voice calls only
• Data calls only
Network Services
124
To set your call diverting options:
1. Select the type of call diverting by pressing the
Up or Down key, and then press the Select soft
key.
2. Select the type of calls to be diverted by
pressing the Up or Down key, and then press the
Select soft key.
The current status displays. If the option has
already been set, the number to which the calls
are diverted displays.
4. Enter the number to which the calls are to be
diverted and press the OK soft key.
To enter an international code, press the 0 key
until the + sign displays.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can deactivate all call diverting settings by
selecting the Cancel All option.
3. To Press the
activate call
diverting
Activate soft key.
Go to Step 4.
change the number
to be called
Change soft key.
Go to Step 4.
deactivate call
diverting
Remove soft key.
Network Services
125
Call Barring
(Menu 8.2)
The call barring network service allows you to
restrict your calls.
Call barring can be set up in the following ways:
All Outgoing: calls cannot be made.
International: international calls cannot be made.
International Except to Home: when abroad,
calls can be made only to numbers within the
current country and to your home country, which is
the country where your home network provider is
located.
All Incoming: calls cannot be received.
Incoming While Abroad: calls cannot be received
when you are using your phone outside of your
home service area.
Cancel All: all call barring settings are deactivated;
calls can be made and received normally.
You can specify individual barring options for each
of the following call types:
•Voice calls only
• Data calls only
To set your call barring options:
1. Select the type of call barring by pressing the Up
or Down key, and then press the Select soft
key.
2. Select the type of calls to be barred by pressing
the Up or Down key, and then press the Select
soft key.
Network Services
126
3. Press the Activate soft key to confirm your
settings.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement displays.
To deactivate specific call barring settings:
1. Select the call barring option to be deactivated.
2. Select the type of call to which this option
applies.
3. Press the Deactivate soft key.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can also deactivate all call barring settings by
selecting the Cancel All option.
Change Barring Password: you can set and
change the call barring password obtained from
your service provider using this option. You must
enter the current password before you can specify a
new one.
Once you have entered a new password, you are
asked to confirm it by entering it again.
Network Services
127
Call Waiting
(Menu 8.3)
This network service informs you when someone is
trying to reach you during another call.
You can specify individual call waiting options for
each of the following call types:
•Voice calls only
• Data calls only
To set your call waiting options:
1. Select the type of calls to which you want to
apply the call waiting option by pressing the Up
or Down key, and then press the Select soft
key.
The screen informs you whether call waiting is
activated or deactivated.
2. You can activate or deactivate the call waiting
feature as necessary by using the Activate or
Deactivate soft key respectively.
To return to the previous screen, press the Exit
soft key.
You can also deactivate all call waiting settings by
selecting the Cancel All option.
Network Services
128
Network Selection
(Menu 8.4)
The Network Selection feature enables you to
automatically or manually select the network used
when roaming outside of your home area.
Note
: You can select a network other than your home
network only if there is a valid roaming
agreement between them.
To indicate to automatically or manually select the
network when roaming:
1. When Network Selection displays, press the
Select soft key.
2. Press the Up or Down key until the appropriate
option highlights and then press the OK soft
key.
If you select Automatic, you are connected to
the first available network when roaming.
If you select Manual, the phone scans for the
available networks. Go to Step 3.
3. Press the Up or Down key until the preferred
network highlights and then press the OK soft
key.
You are connected to that network.
Network Services
129
Caller ID
(Menu 8.5)
You can prevent your phone number from being
displayed on the phone of the person being called.
Note
: Some networks do not allow the user to change
this setting.
The following options are available:
Default: the default setting provided by the
network is used.
Hide Number: your number does not display on
the other person’s phone.
Send Number: your number is sent each time you
make a call.
Closed User Group (CUG)
(Menu 8.6)
This network service allows incoming and outgoing
calls to be restricted to a selected user group. You
may be a member of up to ten user groups.
For details on how to create, activate and use a
closed user group, contact your service provider.
Example: A company lends SIM cards to its
employees and wants to restrict outgoing
calls to members of the same team.
Activating a Closed User Group
If you select the Closed User Group menu, you
can enter the CUG function. You can now access the
following options after pressing the Select soft key:
Network Services
130
Index List: lets you list, add or delete CUG index
numbers. The list of current CUG indexes appears.
Add a new CUG index as advised by your service
provider or delete a group.
Outside Access: lets you enable or disable calls to
numbers other than those in the Closed User
Group. This feature depends on the nature of your
CUG subscription. Please check with your service
provider.
Default Group: you may set a default CUG with
your service provider. If you have done so, you can
enable the Default Group option on your phone.
When making a call, you are given the option of
using your default CUG, instead of selecting one
from the list.
Deactivate: deactivates the CUG function. This
menu appears only when the default group is
enabled or a CUG index is selected.
To Press the
scroll through the
existing CUG
indexes
Up or Down key.
add a new CUG
index
Options soft key, select the
Add option and enter the
index.
delete a CUG
index
Options soft key and select
the Delete option.
activate a CUG
index
Options soft key and select
the Activate option.
Network Services
131
Band Selection
(Menu 8.7)
For the phone to make and receive phone calls, it
must register with one of the available networks.
Your phone can handle either of the following types
of networks:
•GSM 900
•GSM 1800
• Combined GSM 900/1800
•GSM 1900
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you must remember to change to an
appropriate band.
1. When Band Selection displays, press the
Select soft key.
2. Press the Up or Down key until the appropriate
option, GSM 900/1800 or GSM 1900,
highlights and press the OK soft key.
When you select a new band, your phone displays a
confirmation message and then automatically
searches for all of the available networks. Your
phone registers with a preferred network within the
band.
132
Funbox
The Funbox menu contains several fun options.
WAP Browser
(Menu 9.1)
Your phone is equipped with a WAP (Wireless
Application Protocol) browser to allow you to access
and navigate the Wireless Web via your phone.
Home
(Menu 9.1.1)
Selecting this menu connects the phone to the
network and loads the homepage of the Wireless
Web service provider. You can also press the key
in Idle Mode.
The content of the WAP Browser startup homepage
depends on your Wireless Web service provider. To
scroll through the screen, use the Up and Down
keys.
Note
: To access the startup homepage from any other
screen in the WAP browser, use the
Home
option. For further details about the WAP
Browser menus, see page 134.
Exiting the WAP Browser
To exit the browser at any time, simply press the
key.
Funbox
133
Navigating the WAP Browse
r
Entering Text in the WAP Browser
When you are prompted to enter text, the current
text entry mode is indicated on the screen.
For further details about each text input mode, see
page 42.
Note
: When you enter text using the T9 mode in the
WAP browser, you can use only the
0
key to
display alternative words.
To Press the
scroll through and
select browser
items
Up or Down key until the
symbol points to the item,
and then press the OK soft
key to confirm the selection.
select a numbered
item
corresponding numeric key.
return to the
previous page
Back soft key or the C key.
return to the
startup homepage
key and select the Home
option. For further details
about this option, see
page 134.
To change
modes
press the key one or more
times.
To enter a
space
press the
key.
To edit text
➀ set the cursor to the right of
the character(s) to be
corrected.
➁ press the C key as required.
➂ enter the correct character(s).
Funbox
134
Selecting and Using Browser Menu Options
Various menu options are available when you are
using the WAP Browser to navigate the Wireless
Web.
To access a menu option:
1. Press the key.
A menu list displays.
2. Highlight a menu by pressing the Up or Down
key.
3. Select an option by pressing the Select soft key.
4. If necessary, select the secondary option using
the Up and Down keys, and press the Select
soft key to confirm.
Note
: The menus may vary, depending on your
version of the WAP browser.
The following options are available:
Reload: reloads the current page.
Home: takes you back at any time to the home
page of the Wireless Web service provider.
Go to URL: allows you to manually enter the URL
address of a Web page. After entering an address,
press the OK
soft key to go there directly.
Show URL: displays the URL address of the Web
page to which you are currently connected. It also
enables you to set the current site as the startup
home page.
Funbox
135
Edit Home: allows you to change the startup home
page manually. Enter the URL and press the
OK
soft key. For further details about entering text, see
page 42.
Clear Cache: deletes the information stored in the
cache, which stores the most recently accessed
Web pages.
Inbox: allows you to read messages received from
the web server.
Favorite
(Menu 9.1.2)
This menu allows you to store the URL addresses of
up to five of your favourite web sites. You can
access this menu directly by pressing and holding
the
key while using the WAP browser.
To store a URL address:
1. Select an empty location and press the Options
soft key.
2. Enter the address and press the Enter
soft key.
For further details about how to enter
characters, see page 42.
To Press the
set the current
page as your
startup home page
Option soft key, select the
Save to Home option and
press the
Select
soft key.
set a bookmark for
the current page
Option soft key, select the
Save to Bookmark option
and press the
Select
soft
key.
cancel your setting Back soft key.
Funbox
136
3. Enter a name for the favourite item and press
the Enter soft key.
After saving favourite items, you can use the
following options by pressing the Options soft key:
Goto URL: quickly accesses you to the site.
Edit: allows you to edit the address.
Delete
: deletes the address.
http://
(Menu 9.1.3)
This menu allows you to manually enter the URL
address of the Web site that you wish to access. You
can access this menu directly by pressing and
holding the key in the WAP browser.
For further details about how to enter characters,
see page 42.
Settings
(Menu 9.1.4)
This menu allows you to set up five proxy servers
for the WAP browser. Contact your service provider
for details about your Settings options.
For each server, the following options are available:
Profile Name: enter a name that you wish to
assign to the HTTP proxy server.
Homepage URL: set the address of your startup
homepage. When the default homepage displays,
you can delete it using the C key and enter your
own choice.
Security: select a data transmission mode. Choose
Secure
to protect your data against unauthorised
access; otherwise, choose Non-Secure.
Funbox
137
Bearer: select a bearer to be used for each type of
network address accessed; GPRS or Data.
When the bearer is set to GPRS:
IP Address: enter the WAP gateway address
required to connect to the Internet.
User Name: enter the User ID required to connect
to the GPRS network.
Password: enter the password required to connect
to the GPRS network.
APN: enter the access point name used for the
address of the GPRS network gateway.
When the bearer is set to Data:
IP Address: enter the WAP gateway address
required to connect to the Internet.
Login Name: enter the PPP server login ID.
Password: enter the PPP server password.
Dial-up Number: enter the PPP server phone
number.
Data Call Type: select a data call type; Analogue
or ISDN.
Note
: The WAP browser settings may vary, depending
on the service provider. Contact your service
provider for further details.
Clear Cache
(Menu 9.1.5)
You can clear the information stored in the cache,
the phone’s temporary memory which stores the
most recently accessed Web pages.
Press the Yes
soft key to confirm the deletion.
Otherwise, press the No
soft key.
Funbox
138
Push Message
(Menu 9.1.6)
In this menu, you can receive and access web
messages from the server.
The following options are available:
Inbox: allows you to read the messages received
from the web server.
Receive: allows you to set whether or not your
phone receives web messages.
Delete All: allows you to delete all of the web
messages.
Games
(Menu 9.2)
You can download MIDlets (Java applications
running on mobile phones) from various sources
using the WAP Browser and store them in your
phone.
When you access the Games menu, the list of the
default games appears. Once you have downloaded
games, they are added to the list.
Note
: Java services may be unavailable depending
upon the service provider.
Launching a MIDlet
1. Scroll to the MIDlet you want on the Application
list and press the Launch soft key.
2. Start the MIDlet using the soft keys.
Funbox
139
Viewing MIDlet Information
1. Scroll to the MIDlet you want and press the Info
soft key.
The display shows information about the MIDlet,
such as file size, application version and its
vendor.
2. To scroll to other MIDlet information, press
the Up or Down key.
3. If you want to delete the MIDlet, press the
Delete soft key and then press the Yes soft key
to confirm the deletion.
4. To exit and return to the Application screen,
press the Back soft key or the C key.
Changing the DNS Settings
The DNS (Domain Name Server) is the server that
resolves the Java server domain name into IP
address. The DNS setting is preset at the factory,
but sometimes you may need to change it at your
service provider’s instruction.
1. Scroll to Setting on the Applications list and
press the Select soft key.
2. Enter the primary address using the number
keypad and press the OK soft key.
3. Enter the secondary address and press the OK
soft key.
Funbox
140
Entering Text
For entering text while using a MIDlet, the following
input modes are available:
Upper-case character (A): allows you to enter
upper-case English characters.
Lower-case character (a): allows you to enter
lower-case English characters.
Number (1): allows you to enter numbers.
Symbol: allows you to enter symbols. After
highlighting a symbol by pressing the navigation
keys, press the key to insert it.
T9 ( ): allows you to enter English characters by
pressing one key per letter. In this mode, you can
change the case by pressing the 0 key.
To change the text input mode, press the key
until the appropriate indicator appears on the soft
key area of the display.
Funbox
141
Sounds
(Menu 9.3)
In this menu, you can view the list of sounds
downloaded from the web server or received in
multimedia messages. You can set the downloaded
sounds as the current ring tone or send them to
other phones.
By pressing the Options soft key, you can use the
following options:
Rename: allows you to change the name of the
sound.
Delete: deletes the sound.
Set as Ring Tone: sets the sound as your ring
tone.
Images
(Menu 9.4)
In this menu, you can view the list of pictures
downloaded from the web server or received in
messages. You can set the downloaded pictures as
the current background image or send them to
other phones.
If you set a photo as your wallpaper, it displays as
My Photo.icn on the list.
By pressing the Options soft key, you can use the
following options:
Rename: allows you to change the name of the
image.
Delete: deletes the image.
Set as Wallpaper: sets the image as your
wallpaper.
Funbox
142
Delete All
(Menu 9.5)
This menu allows you to delete all of the
downloaded items in the Games, Sounds and
Images folders. You can delete all of the items at
one time.
When a confirming message displays, press the Yes
soft key to confirm.
Memory Status
(Menu 9.6)
You can check the memory status for games or
sounds and images. The display shows the total,
free and used space, and the number of objects you
downloaded.
To Press the
select a folder to
clear
Up or Down key. To delete
all of your items, select All.
place a check mark Mark soft key.
remove a check
mark
Unmark soft key.
delete the marked
items
Delete soft key.
143
Solving Problems
Before contacting the after-sales service, perform
the following simple checks. They may save you the
time and expense of an unnecessary service call.
When you switch your phone on, the
following messages may appear:
Insert SIM Card
• Check that the SIM card is correctly installed.
Phone Locked Enter Password
•The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
Enter PIN
•You are using your phone for the first time. You
must enter the Personal Identification Number
(PIN) supplied with the SIM card.
•The PIN Check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN Check menu
(Menu 6.6.1).
Enter PUK
•The PIN code was entered incorrectly three times
in succession and the phone is now blocked.
Enter the PUK supplied by your network operator.
Solving Problems
144
“No service,” “Network failure” or “Not
done” displays
•The network connection was lost. You may be in a
weak signal area (in a tunnel or surrounded by
buildings). Move and try again.
•You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
You have entered a number but it was
not dialled
•Have you pressed the key?
• Are you accessing the right cellular network?
•You may have set an outgoing call barring option.
Your correspondent cannot reach you
•Is your phone switched on (the key pressed
for more than one second)?
• Are you accessing the right cellular network?
•You may have set an incoming call barring option.
Your correspondent cannot hear you
speaking
•Have you switched off the microphone?
• Are you holding the phone close enough to your
mouth? The microphone is located at the bottom
of the phone.
Solving Problems
145
The phone starts beeping and
“**Warning** Low Battery” flashes on
the display
•Your battery is insufficiently charged. Recharge
the battery.
The audio quality of the call is poor
•Check the signal strength indicator on the display
( ); the number of bars indicates the signal
strength from strong ( ) to weak ( ).
•Try moving the phone slightly or moving closer to
a window if you are in a building.
No number is dialled when you recall a
Phonebook entry
•Check that the number has been stored correctly,
by using the Phonebook Search feature.
•Re-store the number, if necessary.
If the above guidelines do not help you to solve
the problem, take note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung after-
sales service.
146
Access Codes
There are several access codes that are used by
your phone and its SIM card. These codes help you
protect the phone against unauthorised use.
When requested for any of the codes explained
below, enter the appropriate code (displayed as
asterisks) and press the OK soft key. If you make a
mistake, press the C key one or more times until
the incorrect digit is cleared and then continue
entering the correct code.
The access codes, except for the PUK and PUK2
codes, can be changed using the Security menu
(Menu 6.6). See page 109 for further details.
Important! Avoid using access codes resembling
emergency numbers, such as 112, so
that you do not accidentally dial an
emergency number.
Phone Password
The Phone Lock feature uses the phone password to
protect your phone against unauthorised use. The
phone password is supplied with the phone and is
preset to “00000000” at the factory.
To See
activate/deactivate the
Phone Lock feature
page 110
(Menu 6.6.3).
change the phone
password
page 110
(Menu 6.6.4).
Access Codes
147
PIN
The Personal Identification Number or PIN (4 to
8 digits) protects your SIM card against
unauthorised use. It is usually supplied with the
SIM card.
If you enter an incorrect PIN three times in
succession, the code is disabled and cannot be used
until you re-enable it by entering the PUK (see
below).
PUK
The 8-digit PUK (PIN Unblocking Key) is required to
change a disabled PIN. The PUK may be supplied
with the SIM card. If not, or you have lost it,
contact your service provider.
To re-enable your PIN:
1. Enter the PUK and press the OK soft key.
2. Enter a new PIN of your choice and press the OK
soft key.
3. When the Confirm New PIN message displays,
enter the same code again and press the OK
soft key.
If you enter an incorrect PUK ten times in
succession, the SIM card becomes invalid. Contact
your service provider for a new card.
To See
activate/deactivate the
PIN Check feature
page 109
(Menu 6.6.1).
change the PIN page 110
(Menu 6.6.2).
Access Codes
148
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions, such
as setting the maximum cost of a call. These
functions are available if supported by your SIM
card.
If you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.
To change the PIN2, see page 111 (Menu 6.6.7).
PUK2
The 8-digit PUK2 (PIN Unblocking Key 2), supplied
with some SIM cards, is required to change a
disabled PIN2. If you lose the code, contact your
service provider.
To re-enable your PIN2:
1. Enter the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press the
OK soft key.
3. When the Confirm PIN2 message displays,
enter the same code again and press the OK
soft key.
If you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your service
provider for a new card.
Access Codes
149
Barring Password
A 4-digit barring password is required when you use
the Call Barring function. You can obtain the
password from your service provider when you
subscribe to this function.
You can change this password in the Call Barring
menu (Menu 8.2). See page 126 for further
details.
150
Health and Safety
Information
Exposure to Radio-Frequency Energy
(SAR Information)
This phone meets European Union (EU)
requirements concerning exposure to radio waves.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured so as not
to exceed the limits for exposure to radio-frequency
(RF) energy, as recommended by the EU Council.
These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the
general population. The guidelines were developed
by independent scientific organisations through the
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all persons,
regardless of age and health.
The exposure standard for mobile phones employs
a unit of measurement known as SAR (Specific
Absorption Rate). The SAR limit recommended by
the EU Council is 2.0W/kg.
1
1 The SAR limit for mobile phones used by the public is 2.0
watts/kilogram (W/kg) averaged over ten grams of body
tissue. The limit incorporates a substantial margin of safety to
give additional protection for the public and to account for
any variations in measurements. The SAR values may vary
depending on national reporting requirements and the
network band.
Health and Safety Information
151
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the
network. In general, the closer you are to a base
station, the lower the power output of the phone.
Before a new model phone is available for sale to
the public, compliance with the European R&TTE
Directive must be shown. This directive includes as
one of its essential requirements the protection of
the health and safety of the user and any other
person.
Precautions When Using Batteries
•Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge and the type of battery and
charger used. The battery can be charged and
discharged hundreds of times, but it will
gradually wear out. When the operation time
(talk time and standby time) is noticeably shorter
than normal, it is time to buy a new battery.
Health and Safety Information
152
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-
approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than
a week, since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
•Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and lifetime of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
•Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
•Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
Health and Safety Information
153
Road Safety
Your wireless phone gives you the powerful ability
to communicate by voice, almost anywhere,
anytime. But an important responsibility
accompanies the benefits of wireless phones, one
that every user must uphold.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, practice good common
sense and remember the following tips:
1. Get to know your wireless phone and its
features, such as speed dial and redial. If
available, these features help you to place your
call without taking your attention off the road.
2. When available, use a hands-free device. If
possible, add an extra layer of convenience and
safety to your wireless phone with one of the
many hands-free accessories available.
3. Position your wireless phone within easy reach.
Be able to access your wireless phone without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your
voice mail answer it for you.
4. Let the person you are speaking with know you
are driving; if necessary, suspend the call in
heavy traffic or hazardous weather conditions.
Rain, sleet, snow, ice and even heavy traffic can
be hazardous.
5. Do not take notes or look up phone numbers
while driving. Jotting down a To Do list or
flipping through your Phonebook takes your
attention away from your primary responsibility-
driving safely.
Health and Safety Information
154
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your
car will be stationary. If you need to make a call
while moving, dial only a few numbers, check
the road and your mirrors, then continue.
7. Do not engage in stressful or emotional
conversations that may be distracting. Make the
people with whom you are talking aware that
you are driving and suspend conversations that
have the potential to divert your attention from
the road.
8. Use your wireless phone to call for help. Dial an
emergency number in case of fire, traffic
accident or medical emergencies. Remember, it
is a free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. If you see a car accident, crime in
progress or other serious emergency where
lives are in danger, call an emergency number,
as you would want others to do for you.
10. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured,
or a vehicle you know to be stolen, call roadside
assistance or any other special non-emergency
wireless number.
Health and Safety Information
155
Operating Environment
Remember to follow any special regulations in force
in any area and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
Electronic Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and
recommendations of Wireless Technology Research.
Health and Safety Information
156
Persons with pacemakers:
• Should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone
is switched on
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimise potential interference
If you have any reason to suspect that interference
is taking place, switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you
in obtaining this information. Switch your phone off
in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Health and Safety Information
157
Posted Facilities
Switch off your phone in any facility where posted
notices require you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
Users are advised to switch the phone off while at a
refuelling point (service station). Users are
reminded of the need to observe restrictions on the
use of radio equipment in fuel depots (fuel storage
and distribution areas), chemical plants or where
blasting operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas,
such as propane or butane, areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
Health and Safety Information
158
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical
emergencies, for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
To make an emergency call, proceed as follows.
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 112 or any other official
emergency number). Emergency numbers vary
by location.
3. Press the key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not cut off the call until given
permission to do so.
Health and Safety Information
159
Other Important Safety Information
•Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty
installation or service may be dangerous and may
invalidate any warranty applicable to the device.
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
•Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
•For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
•Switch your phone off before boarding an aircraft.
The use of wireless phones in aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
•Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
Health and Safety Information
160
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
•Keep the phone and all its parts and accessories
out of the reach of small children.
•Keep the phone dry. Precipitation, humidity and
liquids contain minerals that corrode electronic
circuits.
•Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
•Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
•Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
•Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s electronic
circuit boards.
•Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
•Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
Health and Safety Information
161
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
• Use only the supplied or an approved
replacement antenna. Unauthorised antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
•If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
162
Glossary
To help you understand the main technical terms
and abbreviations used in this booklet and take full
advantage of the features of your mobile phone,
here are a few definitions:
Active Folder
Ability to answer a call simply by sliding the folder
up.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Diverting
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call Waiting
Informs you that you have an incoming call when
you are engaged on another call.
Caller Line Identification Services (Caller ID)
Services allowing subscribers to view or block the
telephone numbers of callers.
Glossary
163
EMS (Enhanced Message Service)
An adaptation of the Short Message Service (SMS)
that allows you to send and receive ring tones and
service provider’s logo, as well as combinations of
simple media to and from EMS-compliant handsets.
Because EMS is based on SMS, it can use SMS
centres the same way that SMS does. EMS works
on all Global System for Mobile communications
(GSM) networks. EMS senders can use text,
melodies, pictures, sounds, and animations to
enhance the expressive power of messages that are
limited by the display constraints of mobile devices.
GPRS (General Packet Radio Service)
New non-voice value-added service that allows
information to be sent and received across a mobile
telephone network. GPRS provides continuous
connection to the Internet for mobile phone and
computer users. It is based on the Global System
for Mobile Communication (GSM) circuit-switched
cellular phone connections and the Short Message
Service (SMS).
GSM (Global System for Mobile
Communication)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
Glossary
164
Java
Programming language generating applications that
can run on all hardware platforms, whether small,
medium or large, without modification. It has been
promoted for and geared heavily to the Web, both
for public Web sites and Intranets. When a Java
program runs from a Web page, it is called a Java
applet. When it is run on a mobile phone or pager, it
is called a MIDlet.
MMS (Multimedia Message Service)
A message service for the mobile environment,
standardized by the WAP Forum and the 3rd
Generation Partnership Program (3GPP). For phone
users, MMS is similar to Short Message Service
(SMS)-it provides automatic, immediate delivery of
user-created content from phone to phone. The
message addressing used is primarily phone
numbers, thus the traffic goes from phone to
phone. MMS also provides support for e-mail
addressing, so that messages can be sent by
e-mail. In addition to the text content of SMS, MMS
messages can contain still images, voice or audio
clips, and also video clips and presentation
information.
Multi-party Calling
Ability to establish a conference call involving up to
five additional parties.
Phone Password
Security code used to unlock the phone when you
have selected the option to lock it automatically
each time it switches on.
Glossary
165
PIN (Personal Identification Number)
Security code that protects the phone against
unauthorised use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Roaming
Use of your phone when you are outside your home
area (when travelling for example).
SDN (Service Dialling Numbers)
Telephone numbers supplied by your network
provider and giving access to special services, such
as voice mail, directory inquiries, customer support
and emergency services.
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small slot
on the back of the phone and is protected by the
battery.
Glossary
166
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to
speak to the correspondent. The message created
or received can be displayed, received, edited or
sent.
Soft Keys
Two keys marke
d
and on the phone, the
purpose of which:
•varies according to the function that you are
currently using.
•is indicated on the bottom line of the display just
above the corresponding key.
Tri Band
Ability to handle any of the following types of
network; GSM 900, GSM 1800, combined GSM 900/
1800 and GSM 1900 MHz bands, for greater call
success and wider roaming.
Your phone automatically searches for the last
network used. If, for any reason, this network is
unavailable, your phone will attempt to register
with a different network.
Voice Mail
Computerised answering service that automatically
answers your calls when you are not available,
plays a greeting (optionally in your own voice) and
records a message.
167
Index
A
Access codes •
146
Accessories •
9
Active folder, set •
112
Alarm, set (7.1) •
114
Alert type, set •
100
Alphabet mode •
46
Anykey answer, set •
112
Auto light, set •
107
Auto redial, set •
112
Autopower alarm •
115
B
Background image •
105
Backlight •
15
,
106
Band selection (8.7) •
131
Barring
calls (8.2) •
125
password •
126
,
149
Battery
charging •
19
installing •
18
low battery indicator •
20
precautions •
151
removing •
17
Brightness, display •
106
Broadcast (1.9) •
73
Browser, WAP •
132
C
Calculator (7.4) •
119
Calendar (7.1) •
115
Calendar memos
copying •
117
deleting •
117
viewing •
117
writing •
116
Caller groups
editing •
37
searching •
36
Caller ID (8.5) •
129
Calls
answering
a call •
25
a second call •
53
barring (8.2) •
125
cost (3.6) •
91
dialled (3.3) •
89
emergency •
158
ending •
23
holding •
49
international •
22
making •
22
missed •
26
,
88
multi-party •
53
received (3.2) •
89
records (3) •
88
redialling automatically •
112
time (3.5) •
90
via phonebook •
35
waiting (8.3) •
53
,
127
Camera (4) •
92
Care •
160
CB messages •
73
Characters
changing mode •
43
entering •
42
Closed User Group (8.6) •
129
Conference call •
53
Connect tone •
103
Cost of call •
91
CUG •
129
Currency exchange (7.7) •
122
D
Date setting (7.3.2) •
118
Deleting
all call records •
90
all memos •
116
all messages •
71
,
85
all phonebook •
40
all tasks •
122
Index
168
memos •
117
missed calls •
27
,
88
phonebook numbers •
34
received messages •
64
,
77
sent messages •
65
,
79
tasks •
121
Dialled calls (3.3) •
89
Display
brightness •
106
icons •
14
language, change •
109
layout •
13
Draft, picture messages •
79
DTMF tones, send •
52
E
Earpiece volume •
24
Editing
memos •
117
missed calls •
26
,
88
phonebook numbers •
34
tasks •
121
to do list •
120
Emergency calls •
158
EMS, using •
63
Error tone •
102
F
FDN mode (6.6.6) •
111
Fixed Dial Number mode •
111
Fun Box (9) •
132
G
Games (9.2) •
138
Graphic logo •
107
Greeting message (6.3) •
108
Groups
caller •
37
user •
129
I
Icons, description •
14
Inbox, messages
picture •
75
text •
63
Infrared Activate (6.1) •
104
Internet •
132
IrDA port •
104
J
Java service •
138
K
Keypad tones
selecting •
100
sending/muting •
52
volume, adjust •
24
Keys
description •
11
location •
10
shortcut •
113
L
Language (6.5) •
109
Last number, redial •
23
Length of calls •
90
,
103
Letters
changing mode •
43
entering •
42
Locking
phone (6.6.3) •
110
SIM card (6.6.5) •
111
Low battery indicator •
20
M
Maintenance •
160
Memory status
downloaded items •
142
phonebook •
41
picture messages •
85
text messages •
71
Menus
accessing by scroll •
56
accessing by shortcuts •
57
Index
169
list •
57
Message tone (5.5) •
101
Messages
cell broadcast •
73
greeting
108
multimedia •
75
picture •
75
text •
63
voice •
72
Microphone, mute •
51
MIDlets, launch •
138
Minute minder •
103
Missed calls (3.1) •
26
,
88
MMS, using •
75
Morning call •
114
Multimedia messages •
75
Multi-party calls
dropping •
55
making •
53
private conversation •
54
Muting
all sounds •
51
key tones •
52
microphone •
51
N
Names
entering •
42
searching/dialling •
35
storing •
31
Network selection (8.4) •
128
Network services (8) •
123
Numbers
copying phonebook •
34
correcting •
22
deleting •
34
fixed dial •
111
own •
108
pasting phonebook •
34
searching/dialling •
35
storing •
31
O
Organiser (7) •
114
Outbox, messages
picture •
78
text •
65
Own number (6.4) •
108
P
Password
barring
changing •
126
description •
149
phone
changing •
110
description •
146
Phone
lock (6.6.3) •
110
password •
146
switching on/off •
21
Phonebook
copying •
34
deleting •
34
,
40
editing •
34
options •
34
pasting •
34
searching/dialling •
35
speed-dialling •
38
storing numbers/names
•
31
Photos, take •
92
Picture messages
draft •
79
memory status •
85
reading •
75
,
78
sending •
80
setting •
86
templates •
84
PIN
changing •
110
checking •
109
description •
147
PIN2
changing •
111
description •
148
Power on/off tone (5.7) •
102
Problems, solve •
143
PUK •
147
PUK2 •
148
Index
170
R
Received calls (3.2) •
89
Received messages
picture •
75
text •
63
Redialling
automatically •
112
last number •
23
Reset settings (6.9) •
113
Ring
tone (3.1) •
99
type, alert (5.3) •
100
volume (5.2) •
99
Roaming •
128
S
Safety
information •
150
precautions •
7
Schedule •
115
Security •
109
Sent messages
picture •
78
text •
65
Service light •
15
,
107
Shortcut (6.8) •
113
Silent mode •
28
SIM card
installing •
17
locking •
111
SIM Lock (6.6.5) •
111
Sliding tone (5.6) •
102
SMS, using •
63
Soft keys, use •
29
Sound settings (5) •
99
Speed-dialling •
38
Switching on/off
microphone •
51
phone •
21
T
T9 mode •
44
Tasks, to do list
creating •
119
editing •
120
Templates
picture •
84
text •
69
Text
changing mode •
43
entering •
42
Text message
deleting all •
71
memory status •
71
reading •
63
,
65
sending •
66
setting •
69
templates •
69
Time
call •
90
format (7.3.4) •
118
setting (7.3.1) •
118
world (7.3.3) •
118
To do list (7.5) •
119
Tone
connect •
103
error •
102
folder •
102
keypad •
100
message •
101
ring •
99
Travel adapter •
19
U
User group •
129
V
Vibration •
100
Voice mail (1.8) •
72
Voice server •
72
Volume, adjust
earpiece •
24
keypad tone •
24
ring •
99
W
Waiting call •
127
Wallpaper •
105
WAP Browser (9.1) •
132
World time (7.3.3) •
118
171
Access the
Menu
Functions
➀Press the
Menu
soft key.
➁Scroll with the Up and
Down keys through the
list of the menus until you
reach the menu you want.
➂Press the
Select
soft key.
➃Scroll with the Up and
Down keys through the
list of the options until the
one you want is selected.
➄Press the
Select
soft key.
Each of the two soft keys (
and )
perform the function indicated by the
text above it, on the bottom line of the
display.
Switch On/Off Press and hold the
key.
Make a Call ➀Enter the number.
➁Press the key.
End a Call Briefly press the key.
View Missed
Calls
Immediately
After Missing
Them
➀Press the
View
soft
key.
➁Scroll with the Up and
Down keys through the
missed calls.
➂To return the call, press
the key.
Tri Band SGH-D410 GPRS Telephone
Quick Reference Card
172
Answer a
Call
Slide the folder up
or
Press the key.
Adjust the
Volume
Press the or key on the
left side of the phone.
Choose the
Alert Type
➀Select the
Alert Type
menu (Menu
5.3
).
➁Select an option:
•
Light Only
•
Melody
•
Vibration
•
Vibra+Melody
➂
Press the
Select
soft key.
Store
Numbers in
Phonebook
➀Enter the number and
press the Save soft key.
➁Select an icon.
➂Press the
Select
soft key.
➃Select a memory.
➄Press the
Select
soft key.
Store
Numbers in
Phonebook
(continued)
➅Enter the name.
➆Press the
OK
soft key.
➇If necessary, change the
location number.
➈Press the
OK
soft key.
➉Press the key to
return to Idle Mode.
Search for a
Number in
Phonebook
➀Press the
Name
soft
key.
➁Select the
Search
option.
➂Enter the first few letters
of the name.
➃To scroll through the
names, press the Up or
Down key.
➄Press the
View
soft key.
➅To scroll through the
numbers, press the Up
or Down key.
➆Press the key to dial.
Declaration of Conformity (R&TTE)
For the following product :
TRI BAND GSM TELEPHONE
(Product Name)
SGH-D410
(Model Number)
Manufactured at :
Samsung Electronics, 94-1 Imsu-Dong, Gumi City, Kyung Buk, Korea, 730-350
(factory name, address*)
to which this declaration relates, is in conformity with the following
standards and/or other normative documents.
Safety : EN 60950:2000
EMC : EN 301 489-1:2000
EN 301 489-7:2000
SAR : EN 50360:2001
OET Bulletin 65, Supplement C:2001
Network : EN 301 511 V7.0.1
We hereby declare the [all essential radio test suites have been carried out
and that] the above named product is in conformity to all the essential
requirements of Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10 and detailed
in Annex[IV] of Directive 1999/5/EC has been followed with the
involvement of the following Notified Body(ies):
BABT, Claremont House, 34 Molesey Road, Walton-on-Thames, KT12 4RQ, UK
Identification mark: 168
The technical documentation kept at:
Samsung Electronics Euro QA Lab.
which will be made available upon request.
(Representative in the EU)
Samsung Electronics Euro QA Lab.
Blackbushe Business Park, Saxony Way,
Yateley, Hampshire, GU46 6GG, UK
2003. 3. 26 In-Seop Lee / S. Manager
(place and date of issue) (name and signature of authorised person)
*
This is not the address of the Samsung Service Centre. For the address or the
phone number of the Samsung Service Centre, see the warranty card or
contact the retailer where you purchased your phone.