Samsung Electronics Co SGHD600E Single-Band PCS GSM/ EDGE Phone with Bluetooth User Manual D600

Samsung Electronics Co Ltd Single-Band PCS GSM/ EDGE Phone with Bluetooth D600

Users Manual

* Depending on the software installed or your service provider or country, some of the descriptions in this guide may not match your phone exactly.* Depending on your country, your phone and accessories may appear different from the illustrations in this guide.World Wide Webhttp://www.samsungmobile.comPrinted in KoreaCode No.:GH68-00000AEnglish. 08/2005. Drf. 1.0
SGH-D600EUser’s Guide
ImportantsafetyprecautionsFailure to comply with the following precautions may be dangerous or illegal.Drive safely at all timesDo not use a hand-held phone while driving. Park the vehicle first. Switch off the phone when refuellingDo not use the phone at a refuelling point (service station) or near fuels or chemicals.Switch off in an aircraftWireless phones can cause interference. Using them in an aircraft is both illegal and dangerous.Switch off the phone near all medical equipmentHospitals or health care facilities may be using equipment that could be sensitive to external radio frequency energy. Follow any regulations or rules in force.
Important safety precautions1InterferenceAll wireless phones may be subject to interference, which could affect their performance.Be aware of special regulationsMeet any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger.Water resistanceYour phone is not water-resistant. Keep it dry. Sensible useUse only in the normal position (held to the ear). Avoid unnecessary contact with the antenna when the phone is switched on.Emergency callKey in the emergency number for your present location, then press . Keep your phone away from small children Keep the phone and all its parts, including accessories, out of the reach of small children.Accessories and batteriesUse only Samsung-approved accessories and batteries. Use of any unauthorised accessories could damage your phone and may be dangerous.Qualified serviceOnly qualified service personnel may repair your phone.For more detailed safety information, see "Health and safety information" on page 89.• The phone could explode if the battery is replaced with an incorrect type.• Dispose of used batteries according to the manufacturer’s instructions.
2About this GuideThis User’s Guide provides you with condensed information about how to use your phone. To quickly learn the basics for your phone, please refer to “Get started” and “Step outside the phone.”In this guide, the following instruction icons appear:Indicates that you need to pay careful attention to the subsequent information regarding safety or phone features.Indicates that you can get more information on the referenced page. →Indicates that you need to press the Navigation keys to scroll to the specified option and then select it.[ ]Indicates a key on the phone. For example, []< >Indicates a soft key, whose function is displayed on the phone screen. For example, <Menu>• Camera and camcorderUse the camera module on your phone to take a photo or record a video.Special features of your phone• Phone to TVView photos and video clips captured with the phone on your TV screen.•MP3 playerPlay MP3 music files using your phone as an MP3 player.• File viewerOpen documents in various formats on the phone without corruption.
3Special features of your phone•BluetoothTransfer media files and personal data and connect to other devices using free, wireless Bluetooth technology.• Get personal with photo caller IDSee who’s calling you when their very own photo displays.• Name cardCreate name cards with your number and profile. Whenever introducing yourself to others, use this convenient electronic name card.• Voice clarityUse the voice clarity feature to increase the volume and clarity of an incoming call, even in the midst of a crowd.• Multimedia Message Service (MMS)Deliver MMS messages with a combination of text, images, video, and audio.•E-mailDeliver e-mails with images, video, and audio attachments.•JavaEnjoy Java™-based embedded games and download new games.•OrganiserKeep track of your daily, weekly, and monthly schedule.
4ContentsUnpack 6Make sure you have each itemYour phone 6Buttons, features, and locationsGet started 7First steps to operating your phoneInstall and charge the phone..................................... 7Power on or off........................................................ 8Keys and display ..................................................... 9Access menu functions ............................................ 11Customise your phone............................................. 12Make/Answer calls .................................................. 14Step outside the phone 14Begin with your camera, music, and other special featuresUse the camera...................................................... 14Play MP3s.............................................................. 15Browse the web...................................................... 16Use Phonebook ...................................................... 17Send messages...................................................... 18View messages....................................................... 19Use Bluetooth wirelsess........................................... 20Use a memory card................................................. 21Enter text 24ABC, T9, Number, and Symbol modesCall functions 26Advanced calling featuresMenu functions 30All menu options listedSolve problems 87Help and personal needsHealth and safety information 90Index 107
51 Call recordsp.301 Recent contacts2 Missed calls3 Dialled calls4 Received calls5 Delete all6 Call time7 Call costs*p.30p.31p.31p.31p.31p.31p.322 Phonebookp.321 Contact list2 FDN list3 Add new contact4 Group5 Speed dial6 My name card7 Own number8 Management9 Service number*p.32p.33p.33p.34p.35p.35p.36p.36p.363 Applicationsp.371 MP3 Player2 Voice recorder3 Image editor4 Java world5 World time6 Alarm7 Calculator8 Convertor9 Timer10 Stopwatch11 SIM-AT*p.37p.39p.40p.41p.42p.42p.43p.43p.43p.44p.444 Browserp.441 Home2 Bookmarks3 Go to URL4 Clear cache5 Profile settings6 Current profilep.45p.46p.46p.46p.46p.475 Messagesp.481 Create new message2 My messages3 Templates4 Delete all5 Settings6 Broadcast messages7 Memory statusp.48p.50p.54p.55p.55p.60p.616 File managerp.61ImagesVideosMusicSoundsOther filesMemory card**Memory statusp.61p.63p.63p.64p.65p.66p.667 Calendarp.671 Month view2 Week view3 Day viewp. 67p. 69p. 708 Camerap.701 Take a photo2 Record video3 Go to photos4 Go to videosp.70p.73p.76p.769 Settingsp.761 Time & Date2 Phone settings3 Display settings4 Sound settings5 Network services6 Bluetooth7 Security8 Memory status9 Reset settings 10 VOD settingsp.76p.77p.78p.79p.80p.83p.85p.86p.87p.87* Shows only if supported by yourSIM card.** Shows only if a memory card is inserted into the phone.Overview of menu functionsTo access Menu mode, press <Menu> in Idle mode.
6UnpackMake sure you have each itemYou can obtain various accessories from your local Samsung dealer.Phone Travel AdapterBattery User’s GuideThe items supplied with your phone and the accessories at your Samsung dealer may vary, depending on your country or service provider.Your phoneButtons, features, and locationsLeft soft keyVolume keysDial keySpecialfunction keysEarpieceDisplayPower on/off/ Menu exit keyAlphanumeric keysRight soft keyMicrophoneNavigation keys(Up/Down/Left/Right)Web access/Confirm keyDelete key Camera keyHeadset jackFlashStereospeakerMemorycard slotCamera lens
7Get startedFirst steps to operating your phoneSIM card informationWhen you subscribe to a cellular network, you receive a plug-in SIM (Subscriber Identity Module) card loaded with your subscription details, such as your PIN, and available optional services.Install and charge the phone Remove the battery.If the phone is already on, first turn it off by holding [ ]. Insert the SIM card.Make sure that the gold-coloured contacts on the card face down into the phone. Install the battery. Plug the travel adapter into the phone. Plug the adapter into a standard AC wall outlet. When the phone is completely charged (the battery icon becomes still), unplug the adapter from the power outlet.
8Get startedLow battery indicatorWhen the battery is low:• a warning tone sounds,• the battery low message displays, and• the empty battery icon blinks.If the battery level becomes too low, the phone automatically turns off. Recharge your battery. Power on or offKeypad lockWhen you close the phone, the keypad lock feature locks the exposed keys so that nothing will happen if the keys are accidentally pressed.To unlock the keypad, press <Unlock> and press <OK>. Remove the adapter from the phone.Power onDo not turn on the phone when mobile phone use is prohibited.1. Open the phone.2. Press and hold [] to turn on the phone.3. If necessary, enter the PIN and press <OK>.Power off1. Open the phone.2. Press and hold [].
9Get startedKeys and displayKeysPerform the function indicated on the bottom line of the display.In Idle mode, access menu options directly.p. 77In Menu mode, scroll through the menu options.In Idle mode, launch the web browser.In Menu mode, select the highlighted menu option.Send or answer a call.In Idle mode, retrieve the recent numbers dialled, missed, or received.Delete characters from the display and selected item in an application.End a call. Press and hold to switch the phone on and off. In Menu mode, cancel input and return the phone to Idle mode.Enter numbers, letters, and some special characters.In Idle mode, press and hold [1] to access your voicemail. Press and hold [0] to enter an international call prefix.Enter special characters.In Idle mode, press and hold [] to activate or deactivate Quiet mode. Press and hold [] to enter a pause between numbers.Adjust the phone volume.In Idle mode, with the phone open, adjust the keypad tone volume. With the phone closed, press and hold to turn on the display.In Menu mode, scroll through the menu options.In Idle mode, press and hold to turn on the camera.In Camera mode, take a photo or start recording a video.
10Get startedDisplayLayoutThe display has three areas.Icons*Received signal strengthCall in progressOut of your service area; you cannot send or receive callsAlarm setNew text messageNew voicemailNew multimedia messageNew e-mailText and graphicsdisplays messages, instructions, and information you enter.Soft key function indicatorsshows the current functions assigned to the two soft keys.Iconsdisplays various icons.Menu ContactsIcons One of the message Inboxes is fullCall diverting feature active p. 81Bluetooth feature is activep. 83Connected to Bluetooth hands-free car kit or headsetSynchronised with a PCGPRS networkHome Zone, if registered for the appropriate serviceMemory card insertedCall ringer set to vibratep. 79Quiet modep. 13Battery power level* Depending on your country or service provider, the icons shown on the display may vary.
11Get startedAccess menu functionsUse the soft keysThe roles of the soft keys vary depending on the function you are using. The bottom line of the display indicates their current role.Press the left soft key to select the highlighted option.Press the right soft key to return to the previous menu level.Select BackSelect an option1. Press the appropriate soft key.2. Press the Navigation keys to move to the next or previous option.3. Press <Select> or [ ] to confirm the function displayed or option highlighted.4. To exit, choose either of the following methods:•Press <Back> to move up one level.• Press [ ] to return to Idle mode.Use shortcutsPress the number key corresponding to the option you want.
12Get startedCustomise your phone1. In Idle mode, press <Menu> and select Settings → Phone settings → Language.2. Select a language.1. In Idle mode, press <Menu> and select Settings → Sound settings → Incoming call → Ring tone.2. Select a ringtone category.3. Select a ringtone.4. Press <Save>.Display languageCall ringer melodyYou can set a wallpaper for the idle screen.1. In Idle mode, press <Menu> and select Settings → Display settings → Wallpaper.2. Select an image category.3. Select an image.4. Press <Save>.You can change the colour for the display components, such as title bars and highlight bars.1. In Idle mode, press <Menu> and select Settings → Display settings → Skin.2. Select a colour pattern.Idle mode Wallpaper Menu mode skin colour
13Get startedYou can set the Navigation keys as shortcuts to access your favourite menus.1. In Idle mode, press <Menu> and select Settings → Phone settings → Short cut.2. Select a key.3. Select a menu to be assigned to the key.You can switch the phone to Quite mode to avoid disturbing other people.Press and hold [ ] in Idle mode.Menu shortcuts Quiet modeYou can protect the phone against unauthorised use with a phone password. The phone will require the password on power-up.1. In Idle mode, press <Menu> and select Settings → Security → Change password.2. Enter the default password, 00000000, and press <OK>.3. Enter a new 4- to 8-digit password and press <OK>.4. Enter the new password again and press <OK>.5. Select Phone lock.6. Select Enable.7. Enter the password and press <OK>.Phone lock
14Make/Answer callsStep outside the phoneBegin with your camera, music, and other special featuresUse the camera1. Enter an area code and phone number.2. Press [ ].3. To end the call, press [ ].1. When the phone is ringing, press [ ].2. To end the call, press [ ].Press [Volume].Make a callAnswer a callAdjust the volume during a call1. Open the phone.2. In Idle mode, press and hold [ ] to turn on the camera.3. Aim the camera lens at the subject.4. Press [ ] to take a photo. The photo is saved automatically.5. Press <Back> to take another photo.1. In Idle mode, press <Menu> and select Camera → Go to photos.2. Select the photo you want.Take a photoView a photo
15Step outside the phonePlay MP3s1. In Idle mode, press and hold [ ] to turn on the camera.2. Press [1] to switch to Record mode.3. Press [ ] to start recording.4. Press the right soft key to stop recording. The video is automatically saved.5. Press the right soft key to record another video.1. In Idle mode, press <Menu> and select Camera → Go to videos.2. Select the video clip you want.Record a videoPlay a videoUse these methods:• Download from the wireless webp. 44• Download from a computer using Samsung PC Studio Samsung PC Studio User’s Guide• Receive via Bluetooth p. 83• Copy files to a memory card and insert the card into the phonep. 211. In Idle mode, press <Menu> and select Applications → MP3 Player.2. Press <Options> and select Open → Current album.3. Press <Options> and select Add music from → Phone or Memory card .Copy MP3 files to the phoneCreate a play list
16Step outside the phoneBrowse the webUsing a built-in web browser, you can get easy access to the wireless web to get a variety of up-to-date services and information and to enjoy downloads of web content.4. Press [ ] to select the files you want and press <Add>.5. Press <Back> to return to the MP3 player screen. 1. From the MP3 player screen, press [].2. During playback, use the following keys:•: pauses or resumes playback.• Up: opens the current play list.• Left: goes back to the previous file. Goes backward in a file when pressed and held.• Right: skips to the next file. Goes forward in a file when pressed and held.• Volume: adjust the volume.• Down: stops playback.Play MP3 musicIn Idle mode, press [].• To scroll through browser items, press [Up] or [Down]. • To scroll page by page, press [Volume].• To select an item, press < >.• To return to the previous page, press <Back> or [C].• To return to the homepage, press and hold [C].• To use browser menu options, select or press [ ].• To use web page options, press [].Launch the web browserNavigate the web
17Step outside the phoneUse PhonebookTo the phone’s memory1. In Idle mode, enter a phone number and press [].2. Select Phone → a number type.3. Specify the contact information: First name, Last name, Mobile, Home, Office, Fax, Other, Email, Graphic ID, Alert, Group, and Notes.4. Press <Save> to save the entry.To the SIM card1. In Idle mode, enter a phone number and press [].2. Select SIM.3. Enter a name.4. Press [] to save the entry.Add an entry1. In Idle mode, press <Contacts>.2. Select an entry.3. Scroll to a number and press [ ] to dial, or [ ] to edit the contact information.1. In Idle mode, press <Menu> and select Phonebook → My name card.2. Specify your contact information.3. Press <Save> to save the name card.4. To send the name card to other people, press <Options> and select Send via → a sending method.Find an entryCreate and send a name card
18Step outside the phoneSend messages1. In Idle mode, press <Menu> and select Messages → Create new message → Text message.2. Enter the message text and press [].3. Enter destination numbers.4. Press [].1. In Idle mode, press <Menu> and select Messages → Create new message → Multimedia message.2. Select Subject.3. Enter the message subject and press [].4. Select Picture & Video or Sound.Send a text message (SMS)Send a multimedia message (MMS)5. For Picture & Video, select Pictures or Videos and add an image or video clip.For Sound, select a sound category and add a sound clip.6. Select a media file and press <Add>.7. Select Message.8. Enter the message text and press [].9. Press <Options> and select Send.10.Enter destination numbers or e-mail addresses.11.Press [].
19Step outside the phoneView messages1. In Idle mode, press <Menu> and select Messages → Create new message → Email.2. Select Subject.3. Enter the e-mail subject and press [].4. Select Message.5. Enter the e-mail text and press [].6. Select File attach.7. Add image, video, sound, music files, or document files.8. Press <Options> and select Send.9. Enter e-mail addresses.10.Press [].Send an e-mailWhen a notification appears:1. Press <View>.2. Select the message from the Inbox.From the Inbox:1. In Idle mode, press <Menu> and select Messages → My messages → Inbox.2. Select the text message ( ).When a notification appears:1. Press <View>.2. Select the message from the Inbox.View a text messageView a multimedia message
20Step outside the phoneUse Bluetooth wirelsessYour phone is equipped with Bluetooth technology which enables you to connect the phone wirelessly to other Bluetooth devices and exchange data with them, talk hands-free, or control the phone remotely.From the Inbox:1. In Idle mode, press <Menu> and select Messages → My messages → Inbox.2. Select the MMS message ( ).1. In Idle mode, press <Menu> and select Messages → My messages → Email box.2. Select Check new mail.3. Select an e-mail or header.4. If you selected a header, press <Options> and select Retrieve.View an e-mailIn Idle mode, press <Menu> and select Settings → Bluetooth → Activation → On.1. In Idle mode, press <Menu> and select Settings → Bluetooth → My devices → Search new device.2. Select a device.3. Enter a Bluetooth PIN code or the other device’s Bluetooth PIN code, if it has one, and press <OK>. When the owner of the other device enters the same code, the pairing is complete.Turn on BluetoothSearch for and pair with a Bluetooth device
21Step outside the phoneUse a memory cardYou can use a memory card to enlarge your phone’s capacity.1. Access an application, Phonebook, File manager, or Calendar.2. Select the item you want to send.3. Press <Options> and select Send via → Bluetooth. 4. Select a device.5. If necessary, enter the Bluetooth PIN code and press <OK>.To receive data via Bluetooth, your phone’s Bluetooth feature must be active.If necessary, press <Yes> to confirm the reception.Send dataReceive data• Frequent erasing and writing will shorten a memory card’s lifespan.• Do not remove a memory card from the phone or turn off the phone while data is being accessed or transferred. This could result in loss of data and/or damage to the card or phone.• Do not subject memory cards to strong shocks.• Do not touch memory card terminals with your fingers or metal objects. If dirty, wipe the card with a soft cloth.• Keep memory cards away from small children or pets.• Do not expose memory cards in a place subject to electro static discharge and/or electrical noise.Important memory card information
22Step outside the phone1. Slide a memory card into the memory card slot, with the label side face down.2. Press the card until it locks into place.Insert a memory card1. Press the memory card so that it is disengaged from the phone.2. Slide the card out of the slot.Remove the memory card
23Step outside the phoneUsing a card adapter and a USB card reader/writer, you can read the card on a PC.1. Insert a memory card into a card adapter, and then the adapter into a cardreader/writer.2. Plug the USB connector of the card reader/writer into the USB port on your PC.3. Access the appropriate memory disk and copy to and from the card.Use a card adapterIf a file name is more than 52 characters, the file will not display on the phone.
24Enter textABC, T9, Number, and Symbol modesYou can enter text for some features such as messaging, Phonebook, or Calendar, using ABC mode, T9 mode, Number mode, and Symbol mode.Changing the text input modeThe text input mode indicator displays when the cursor is in a text field.• Press and hold [ ] to switch between T9 ( ) and ABC ( ) modes.• Press [ ] to change case ( / / ) or to switch to Number mode ( ).• Press and hold [ ] to switch to Symbol mode ().Using ABC modePress the appropriate key until the character you want appears on the screen.(creating an SMS message with GSM-alphabet encoding)Characters in order displayedKey Upper case Lower case
Enter text 25Tips for using ABC mode• To enter the same letter twice or to enter a different letter on the same key, wait for the cursor to move to the right automatically or press [Right]. Then, enter the next letter.• Press [ ] to insert a space.• Press the Navigation keys to move the cursor. •Press [C] to delete characters one by one. Press and hold [C] to clear the display.Using T9 modeT9 is a predictive text input mode that allows you to key in any character using single keystrokes.Entering a word in T9 mode1. Press [2] to [9] to start entering a word. Press each key once for each letter. For example, press [4], [3], [5], [5], and [6] to enter HELLO in T9 mode. T9 predicts the word that you are typing, and it may change with each key that you press.2. Enter the whole word before editing or deleting characters.3. When the word displays correctly, go to step 4. Otherwise, press [0] to display alternative word choices for the keys that you have pressed. For example, OF and ME use [6] and [3].4. Press [ ] to insert a space and enter the next word.Tips for using T9 mode• Press [1] to enter periods or apostrophes automatically.• Press the Navigation keys to move the cursor. • Press [C] to delete characters one by one. Press and hold [C] to clear the display.Adding a new word to the T9 dictionaryThis feature may not be available for some languages.1. Enter the word that you want to add.2. Press [0] to display alternative words for your key presses. When there are no more alternative words, Spell displays on the bottom line. 3. Press <Spell>.
264. Enter the word you want using ABC mode and press <Add>.Using Number modeNumber mode enables you to enter numbers. Press the keys corresponding to the digits you want.Using Symbol modeSymbol mode enables you to insert symbols.Call functionsAdvanced calling featuresMaking a call1. In Idle mode, enter the area code and phone number.2. Press [ ].Making an international call1. In Idle mode, press and hold [0]. The + character appears.2. Enter the country code, area code, and phone number, then press [ ].Redialling recent numbers1. In Idle mode, press [ ] to display the list of recent numbers.To Pressdisplay more symbols [Up] or [Down]. select a symbol the corresponding number key.clear the symbol(s) [C]. insert the symbol(s) <OK>.• Press [C] to clear the last digit or press and hold [C] to clear the whole display. You can move the cursor to edit an incorrect digit.• Press and hold [ ] to enter a pause between numbers.
Call functions 272. Scroll to the number you want and press [ ].Making a call from PhonebookOnce you have stored a number in Phonebook, you can dial the number by selecting it from Phonebook.p. 32You can also use the speed dial feature to assign your most frequently called numbers to specific number keys. p. 35You can quickly dial a number from the SIM card using the location number assigned when stored.1. In Idle mode, enter the location number for the phone number you want and press [ ].2. Press [Left] or [Right] to scroll through other numbers.3. Press <Dial> or [ ] to dial the number you want.Ending a callClose the phone or press [ ].Answering a callWhen you receive an incoming call, the phone rings and displays the incoming call image. Press [ ] or <Accept> to answer the call.Tips for answering a call• When Anykey answer is active, you can press any key to answer a call, except for [ ] and <Reject>.p. 78• Press <Reject> or [ ] to reject a call.• Press and hold [Volume] to reject a call or mute the ringer, depending on the Volume key setting.p. 78Viewing missed callsIf you have missed calls, the screen displays how many calls you have missed.1. Press <View>.2. If necessary, scroll through the missed calls.3. Press [ ] to dial the number you want.
28Call functionsUsing the headsetUse the headset to make or answer calls without holding the phone. Connect the headset to the jack on the right side of the phone. The button on the headset works as listed below:Options during a callYou can access a number of functions during a call.Adjusting the volume during a callUse [Volume] to adjust the earpiece volume during a call.Press [Volume Up] to increase the volume level and [Volume Down] to decrease the volume level.Placing a call on hold/RetrievingPress <Hold> or <Retrieve> to place the call on hold or retrieve the call.Making a second callYou can make another call if your network supports it.1. Press <Hold> to put the call on hold.2. Make the second call in the normal way.3. Press <Swap> to switch between the calls.4. Press <Options> and select End held call to end the call on hold.5. To end the current call, press [ ].Answering a second callYou can answer an incoming call while already on the phone, if your network supports it and you have activated the call waiting feature.p. 82 1. Press [ ] to answer the call. The first call is automatically put on hold.2. Press <Swap> to switch between the calls.To Pressredial the last call and hold the button.answer a call and hold the button.end a call and hold the button.
Call functions 29Using the Speakerphone featureUse the stereo speakers on the sides of the phone to talk and listen with the phone a short distance away.Press [ ] to activate the Speakerphone feature. Press the key again to switch back to the earpiece.Using In-call optionsPress <Options> to access the following options during a call:•Voice clarity on/Voice clarity off: remove extraneous noise and increase call quality so that the person with whom you are speaking can hear you clearly even if you are in a noise place.•Mute/Unmute: switch off the phone's microphone so that the other person on the phone cannot hear you, or switch it back on.•Mute keys/Send keys: switch the key tones on or off.•Phonebook: access the contact list.•Send DTMF: send the DTMF (Dual tone multi-frequency) tones as a group. The DTMF tones are the tones used in phones for tone dialling, sounding when you press the number keys. This option is helpful for entering a password or an account number when you call an automated system, like a banking service.•Message: read an incoming message and send a new message.p. 48•Join: set up a multi-party call by adding a caller on hold to a currently active call. You can include up to five people on a multi-party call.•Split: have a private conversation with one multi-party call participant. The other participants can converse with each other. After the private conversation, select Join to return to the multi-party call.•Transfer: transfer the currently active call to a caller on hold. The two callers can talk to each other, but you are disconnected from the call.To communicate with answering machines or computerised telephone systems, Send keys must be selected.
30•Remove: disconnect one multi-party call participant.•End held call: disconnect the call currently on hold.•SIM service: access special services, such as news, weather forecasts, entertainment, and location services, provided by your SIM card. This option is available when you use a SIM card supporting SIM AT menus.•Switch to headset/Switch to phone: switch the call to a Bluetooth headset or hands-free car kit or back to the phone.Menu functionsAll menu options listedCall records(Menu 1) Use this menu to view the calls you have dialled, received, or missed, and the length of your calls. You can also check the cost of your calls, if the SIM card supports this function.To access this menu, press <Menu> in Idle mode and select Call records.Recent contacts(Menu 1.1)This menu displays the most recent calls dialled, received, or missed. Accessing a call record1. Press [Left] or [Right] to select a call type.2. Press [Up] or [Down] to scroll through the call list. 3. Press [ ] to dial a number, or [ ] to view the details of a call.
Menu functions Call records(Menu 1)31Using call record optionsWhile viewing call details, press <Options> to access the following options:•Save as contacts: save the number in Phonebook.•Send message: send an SMS or MMS message.•Delete: delete the selected call record or all records.Missed calls(Menu 1.2)This menu displays the most recent received calls that you did not answer.Dialled calls(Menu 1.3)This menu displays the most recent calls you have dialled.Received calls(Menu 1.4) This menu displays the most recent calls you have received.Delete all(Menu 1.5) Use this menu to delete all of the records in each call type.1. Press [ ] to check the call type(s) to clear. 2. Press <Delete>. 3. Press <Yes> to confirm the deletion.Call time(Menu 1.6) This menu displays the time log for calls made and received. The actual time invoiced by your service provider will vary.•Last call time: check the length of your last call.•Total sent: check the total length of all the calls you have dialled.•Total received: check the total length of all the calls you have received.•Reset timers: reset the call timers. You need to enter the phone password.The password is preset to 00000000. You can change this password.p. 86
32Menu functionsCall costs(Menu 1.7) This network feature displays the cost of calls. This menu is available only if your SIM card supports this feature. Note that this is not intended to be used for billing purposes.•Last call cost: check the cost of your last call.•Total cost: check the total cost of all your calls. If the total cost exceeds the maximum cost set in Set max cost, you must reset the counter before you can make another call.•Max cost: check the maximum cost limit set in Set max cost.•Reset counters: reset the cost counters.•Set max cost: set the maximum cost authorised for your calls.•Price/Unit: set the price per unit that is applied when the cost of your calls is calculated.Phonebook(Menu 2)You can store phone numbers on your SIM card and in your phone’s memory. The SIM card and phone’s memory are physically separate, but they are used as a single entity called Phonebook.To access this menu, press <Menu> in Idle mode and select Phonebook.Contact list (Menu 2.1)Use this menu to search for numbers in Phonebook.Finding an entry1. Enter the first few letters of the name that you want to find.2. Select the name you want from the list.3. Scroll to a number and press [ ] to dial, or [ ] to edit the contact information.Using Phonebook optionsWhile viewing contact details, press <Options> to access the following options:•Edit: edit the contact information.
Menu functions Phonebook(Menu 2)33•Send message: send an SMS, MMS, or e-mail message to the selected number.•Copy: copy the number to the phone’s memory, to SIM card, or to FDN list.•Send via: send the contact via SMS, MMS, e-mail, or Bluetooth. •Delete: delete the selected entry.•Print via Bluetooth: print the contact information by connecting the phone to a printer via Bluetooth.FDN list (Menu 2.2)Use this menu to create a list of contacts to be used in FDN (Fixed Dialling Number) mode, in which the phone allows outgoing calls only to the specified phone numbers, if your SIM card supports this feature. You can activate FDN mode in the FDN mode menu.p. 86Adding a contact1. From the FDN list, press <Options> and select Add.2. Enter your PIN2 and press <OK>.3. Enter information about the contact:•Name: assign a name.•Phone number: add a number.•Location: assign a location number.4. Press <Save>.Using contact optionsYou can access contact options by pressing <Options> in Contact list.Add new contact (Menu 2.3)Use this menu to add a new contact to Phonebook.Storing a number in the phone’s memory1. Select Phone.2. Change the settings or enter information about the contact:•First name/Last name: assign a name.•Mobile/Home/Office/Fax/Other: add a number in any category.•Email: assign an e-mail address.
34Menu functions•Graphic ID: assign an image or a video clip as a caller ID image to alert you to a call from the person.•Alert: assign a unique ringtone to alert you to a call from the person.•Group: assign the number to a caller group.•Notes: add a memo about the person.3. Press <Save> to save the contact.Storing a number on the SIM card1. Select SIM.2. Enter information about the contact:•Name: assign a name.•Phone number: add a number.•Location: assign a location number.3. Press <Save> to save the contact.Group (Menu 2.4)Use this menu to organise your contacts in caller groups.Adding members to a caller group1. Select a group.2. Press <Add>.3. Press [ ] to check the contacts you want.4. Press <Add>.Managing caller groupsWhile viewing the group list, press <Options> to access the following options:•View: access the members of the selected group.•Add: add a new group.•Edit: change the properties of the selected group.•Send message: send an SMS, MMS, or e-mail message to the member(s) you want.•Delete: delete the selected group. Group members, however, will not be deleted from Phonebook.The settings specified in Graphic ID and Alert are given priority over group settings.To assign a caller ID image, ringtone, or group, the contact must be saved to the phone’s memory.
Menu functions Phonebook(Menu 2)35Speed dial (Menu 2.5)Use this menu to assign speed dial numbers (2 to 9) for eight of your most frequently called numbers.Assigning speed dial entries1. Select a key location from 2 to 9. Key 1 is reserved for your voice mail server.2. Select the contact you want from the contact list.3. Scroll to a number, if it has more than one number.4. Press <Select>.Managing speed dial entriesWhile viewing the Speed dial screen, press <Options> to access the following options:•Add: assign a number to an unassigned key. You can select a contact from Phonebook or the FDN list.•View: display the number assigned to the key.•Change: assign a different number to an assigned key.•Remove: clear the speed dial setting.Dialling speed dial entriesIn Idle mode, press and hold the appropriate key.My name card(Menu 2.6)Use this menu to create a name card and send it to other people.Saving your name cardThe procedure for creating your name card is the same as the one for saving a number in the phone’s memory.p. 33 Using name card optionsAfter saving your name card, press <Options> to access the following options:•Edit: edit the name card. •Send via: send the name card via SMS, MMS, e-mail, or Bluetooth.•Exchange namecard: exchange the name card with another person’s name card via Bluetooth.•Remove: remove the name card information.
36Menu functions•Print via Bluetooth: print the name card information by connecting the phone to a printer via Bluetooth.Own number(Menu 2.7) Use this feature to check your phone numbers, or to assign a name to each of the numbers. Changes made here do not affect the actual subscriber numbers on your SIM card.Management(Menu 2.8)Use this menu to manage Phonebook.•Default saving: select a default memory location for saving contacts. If you select Ask on saving, the phone will ask you to select a memory location each time you save a number.•Copy all to phone: copy all of the contacts stored on the SIM card to the phone’s memory.•Sort by contacts: sort your contacts by the first name or last name.•Delete all: delete all of the contacts from your phone’s memory, your SIM card, or the FDN list.•Memory status: display the number of contacts you have stored in Phonebook.Service number(Menu 2.9)Use this menu to view the list of Service Dialling Numbers (SDN) assigned by your service provider, including emergency numbers and numbers for directory enquiries. This menu is available if your SIM card supports SDN. 1. Scroll to the number you want and press <View>.2. Press <Dial> or [ ].
Menu functions Applications(Menu 3)37Applications(Menu 3)Use this menu to play Java games, play MP3 music files, or edit photos. You can also use convenient features, such as a voice recorder, alarm clock, calculator, converter, and stopwatch.To access this menu, press <Menu> in Idle mode and select Applications.MP3 Player(Menu 3.1)Use this menu to enjoy music. First, you need to save music files in your phone’s memory. To enjoy high quality music, you can use an optional Bluetooth stereo headset.Downloading or receiving music filesUse these methods to save music files to your phone:• Download from the wireless webp. 44• Download from a computer using the Samsung PC Studio programmeSamsung PC Studio User’s Guide• Receive via Bluetoothp. 83• Copy files to a memory card and insert the card into the phone.Creating a play listAdd the music files to the play list so you can play them.1. From the MP3 player screen, press <Options> and select Open → Current album. 2. Press <Options> and select Add music from → Phone or Memory card.3. Press [ ] to select the files you want and press <Add>.4. Press <Back> to go back to the MP3 player screen.Playing music filesFrom the MP3 player screen, press [ ].Normal headsets are not compatible with the MP3 player.
38Menu functionsDuring playback, you can use the following keys:Using MP3 player optionsFrom the MP3 player screen, press <Options> to access the following options:•Play/Pause: begin or pause playback.•Play via: select a sound output mode, Phone or A/V headset. If you selected A/V headset, you can use a Bluetooth headset and then search for and connect to the headset. •Open: access the current play list or album list.•Send via: send the file via e-mail or Bluetooth.Key FunctionPauses or resumes playback.Up Opens the current play list.Left Goes to the previous file. Moves backward in a file when pressed and held.Right Skips to the next file. Skips forward in a file when pressed and held.Volume Adjusts the volume.1Changes the equaliser mode.2Changes the playback animation.3Changes the repeat mode.4Turns 3D sound on or off.5Changes the skin image.6Sets the MP3 player to play music at random.7Repeats a section of your choice. Pressing this key begins a search for the starting point. To search for the end point, press this key again. To stop repeating, press this key.Down Stops playback.You can try a Bluetooth connection from the headset. To do this, the phone must be in Idle mode.Key Function
Menu functions Applications(Menu 3)39•Set as: set the file as your ringtone, as a ringtone for a Phonebook entry, or alarm melody.•Remove from play list: remove the selected file from the play list.•Settings: change the default settings for playing music files. Repeat: select a repeat mode.Shuffle: set the MP3 player to play music at random.Equalize: change the equaliser setting.3D sound: turn 3D sound on or offVisualization: change the playback animation.MP3 skin: select a skin typeVolume: select a volume level.•Properties: access the file properties.Accessing the play listFrom the MP3 player screen, press [Up].Press <Options> to access the following options:•Play via: select a sound output mode, Phone or A/V headset. •Add music from: add files to the play list.•Go to album list: access the album list.•Move to: move the selected file to another play list.•Copy to: copy the selected file to another play list.•Change order: move the selected file to the position you want within the play list.•Remove: remove the selected file or all files from the play list.•Properties: access the file properties.Voice recorder(Menu 3.2)Use this menu to record voice memos. A voice memo can be up to one hour long.Recording a voice memo1. Press [ ] to start recording. 2. Speak into the microphone.Press [ ] to pause or resume the recording.3. When you have finished, press <Save> or [Down]. The voice memo is automatically saved.4. Press [ ] to review the voice memo.
40Menu functionsPlaying a voice memo1. From the Voice record screen, press <Options> and select Go to voice list.2. Select a voice memo. The memo plays.During playback, use the following keys:Changing the voice recorder settingsYou can change the recording settings for the voice recorder. Before recording a voice memo, press <Options> and select Settings to access the following options:•Recording time: select a recording time.1 hour: record a voice memo of up to one hour.Limit of MMS: record a voice memo for adding to an MMS message.•Volume: select a volume level.•Default name: change the default prefix of the voice memo.•Visualization: select an equalizer image.Image editor(Menu 3.3)Use this menu to edit your photos using various editing tool options.1. Press <Options> and select New image → Open or Take a photo2. Select a photo or take a new photo.3. Press <Options> to access the following options and edit the photo:•Effects: change the colour tone or apply a special effect to the photo.•Adjust: adjust the image brightness, contrast, or colour balance.•Transform: rotate or flip the photo.•Insert: add a decorative frame, an emoticon, or a clip art to the photo.Key FunctionPauses or resumes playback.Left Goes backward in a memo.Right Skips forward in a memo.Volume Adjusts the volume.Down Stops playback.
Menu functions Applications(Menu 3)41•Undo: cancel your selection.4. When you have finished, press <Options> and select one of the following options:•Save as: save the file as a different name.•Set as: set the file as your wallpaper or as a caller ID image for a Phonebook entry.•Send via: send the file via MMS, e-mail, or Bluetooth.•Share for Bluetooth: share the file with other Bluetooth devices or hide the file so that other Bluetooth devices cannot access it. •Print via: print the file by connecting the phone to a printer via USB or Bluetooth.Java world(Menu 3.4)Use this menu to access the default Java games and downloaded Java applications.Playing a default game1. Select a game.2. Press any key except [ ] to launch the game.3. Follow the onscreen instructions.Using Java game optionsFrom the game list, press <Options> to access the following options:•Start: launch the selected game.•Delete: delete the game.•Properties: access the game properties.•Permission: set permission settings for services charging you additional costs, such as network access and SMS.•Upgrade: upgrade the application to the latest version.•Send information via SMS: send the URL containing the application via SMS.•Memory status: access memory information for applications.•Network settings: select a connection profile to be used for applications requiring network access. You can also add or edit a profile.p. 46
42Menu functionsWorld time(Menu 3.5)Use this menu to set your local time zone and find out what time it is in another part of the world. Viewing world time1. From the world map, press [Left] or [Right] to select the foreign time zone you want to view.2. To set another time zone, press [Down].3. Press [Left] or [Right] to select the time zone you want to view.4. Press [ ].Applying Daylight Savings Time1. From the world map, press <Options> and select Set daylight saving time.2. Press [ ] to check the time zone(s) you want. 3. Press <Save>.Alarm(Menu 3.6) Use this menu to set alarms. The alert type for a normal alarm corresponds to the call alert type settings. A wake up alarm is not affected by your sound settings.Setting an alarm1. Select the type of alarm.2. Select an alarm option.•Alarm: activate the alarm.•Alarm time: enter the time for the alarm to ring.•AM/PM: set AM or PM in 12-hour format.•Alarm day: check the days for the alarm.•Alarm tone: select an alarm tone.3. Press <Save>.Stopping an alarm• For an alarm, press any key.• For a wake-up alarm, press <OK> or [ ]. Press any key, except <OK> and [ ], to cause it to sound again after 5 minutes. You can do this a maximum of 5 times.Setting the alarm to ring even if the phone is offFrom the Alarm screen, select Auto power → On.If the phone is off when it is time for the alarm to ring, the phone switches on and sounds the alarm.
Menu functions Applications(Menu 3)43Calculator(Menu 3.7) Use this menu to perform basic arithmetic functions such as addition, subtraction, multiplication, and division.1. Enter the first number. •Press <.()> to insert a demical point or bracket.• Press [] or [] to move the cursor.2. Enter the operation for your calculation by pressing the Navigation keys.3. Enter the second number.4. Press [ ] to view the result.5. If necessary, repeat from step 2 to continue the calculation.Convertor(Menu 3.8)Use this menu for common conversions, such as currency and temperature.Performing a conversion1. Select the convertor type you want.2. Press [Left] or [Right] to select the original unit and press [Down].3. Enter the value to be converted and press [Down].• Press [ ] to insert a decimal point.• Press [ ] to change the temperature to above zero (+) or below zero (-).4. Press [Left] or [Right] to select the unit to which you want to convert.The equivalent value for the amount you entered displays.Using converter optionsPress <Options> to access the following options:•Clear: clear the current values.•Reverse: reverse the conversion.•Currency rates: edit the currency rate list.Timer(Menu 3.9)Use this menu to set a period of time for the phone to count down. The phone will sound an alarm when the specified period of time has expired.
44Menu functionsStarting the timer1. Press <Set>.2. Enter the length of time you want to count down and press <OK>.3. Press [ ] to start counting down.Stopping the timer• Press any key to stop the timer when it rings.• Press [ ] on the Timer screen to stop the timer before it rings.Stopwatch(Menu 3.10)Use this menu to measure elapsed time. The maximum time is 10 hours.1. Press [ ] to start the stopwatch.2. Press [ ] to check an interval. You can repeat this step for a total of 4 intervals.3. To reset the stopwatch, press <Reset>.SIM-AT(Menu 3.11) This menu is available if you use a SIM-AT card that supports SIM Application Tool kit menus and provides additional services, such as news, weather, sports, entertainment, and location services. Available services may vary, depending on your service provider’s plans. For details, see your SIM card instructions or contact your service provider.Browser(Menu 4) The Wireless Application Protocol (WAP) on your phone allows you to access the wireless web. Using the web browser, you can access up-to-date information and a wide variety of media content, such as wallpapers, ringtones, and music files.To access this menu, press <Menu> in Idle mode and select Browser.
Menu functions Browser(Menu 4)45Home(Menu 4.1)Use this menu to connect your phone to the network and load the homepage of the wireless web service provider. You can also press [ ] in Idle mode.Navigating the web browserUsing browser menu options1. Select or press [ ].2. Select one of the following browser options:•Back: go back to the previous page.•Home: go back to the homepage.•Exit: exit the web browser.•Reload: reload the current page.•Show URL: display the URL address of the current web page. You can also set the current page as the homepage for the web browser.•About...: access the properties of your web browser.Using web page optionsFrom any web page, press [ ] to access the following options:•Go to URL: enter a URL address manually.•Bookmarks: switch to the Bookmarks menu.•Messages: check the message stored in the My messages folder. You can also create and send a new SMS message.p. 50•File manager: switch to the File manager menu.p. 61Exiting the browserPress [ ] to exit the browser.To Pressscroll through browser items [Up] or [Down]. scroll page by page [Volume].select a browser item < >.return to the previous page <Back> or [C].return to the homepage and hold [C].
46Menu functionsBookmarks(Menu 4.2)Use this menu to save URL addresses to quickly access a website.Adding a bookmark1. Select an empty location. 2. Enter a name for the bookmark and press [Down].3. Enter a URL address.4. Press [ ] to save the bookmark.Accessing a bookmarked pageSelecting a bookmark item launches the web browser and access the associated web page.Using bookmark optionsAfter saving an item, press <Options> to access the following options:•Go: access the website.•Edit: edit the address and name of the bookmark.•Delete: delete the selected bookmark or all bookmarks.Go to URL(Menu 4.3)Use this menu to manually enter the URL address of a website and access the website.Clear cache(Menu 4.4)Use this menu to clear the cache, which is the temporary memory that stores the web pages you have recently accessed.Profile settings(Menu 4.5)Use this menu to set up servers for the web browser. Contact your service provider for details about your settings options.For each server, the following options are available:•Profile name: assign a name to the server profile. •Home URL: enter the address of your homepage. •Bearer: select a bearer for each type of network address accessed.
Menu functions Browser(Menu 4)47•Proxy: select whether or not the phone uses a proxy server to launch the web browser. Your service provider can tell you if your network requires a proxy server, and they can give you the appropriate settings. •GPRS settings: customise the following GPRS network settings:When the proxy is set to Enable:Proxy IP: enter the web gateway address.Proxy port: enter the port number.APN: enter the access point name of the GPRS network gateway.Login ID: enter the user ID.Password: enter the password.When the proxy is set to Disable:DNS1: enter the primary address.DNS2: enter the secondary address.APN: enter the access point name of the GPRS network gateway.Login ID: enter the user ID.Password: enter the password.•GSM settings: customise the following GSM network settings:When the proxy is set to Enable:Proxy IP: enter the web gateway address.Proxy port: enter the port number.Dial number: enter the PPP server phone number.Login ID: enter the user ID.Password: enter the password.Data call type: select a data call type.When the proxy is set to Disable:DNS1: enter the primary address.DNS2: enter the secondary address.Dial number: enter the PPP server phone number.Login ID: enter the user ID.Password: enter the password.Data call type: select a data call type.Current profile(Menu 4.6)Use this menu to activate one of the proxy servers you have set up.
48Menu functionsMessages(Menu 5) Use the Messages menu to send and receive short messages, multimedia messages, and e-mails. You can also use push message, Voice mail, and Cell broadcast message features.To access this menu, press <Menu> in Idle mode and select Messages.Create new message(Menu 5.1)Use this menu to create and send text messages, multimedia messages, or e-mails.Text message (Menu 5.1.1)Short Message Service (SMS) allows you to send or receive text messages including pictures, audio clips, and animated images.1. Enter your message.2. Press <Options> to access the following options for creating a message:•Insert: add a template, Phonebook entry, or bookmark.•Add picture/Add animation/Add melody: attach a simple image, animated image, or a melody.•Attach: add a name card or calendar data as data format attachments.•Text style: change the text attributes.3. When you have finished, press <Options> and select Send only or Save and send.4. Enter a destination number.To send the message to more than one recipient, fill in the destination fields.5. Press [ ].Multimedia message (Menu 5.1.2)Multimedia Message Service (MMS) delivers messages containing a combination of text, image, video, and audio, from phone to phone or from phone to e-mail. 1. Select the Subject line.The maximum number of characters allowed in a short message varies by your service provider. If your message exceeds the maximum number of characters, the phone will split the message.
Menu functions Messages(Menu 5)492. Enter the subject and press [ ]. 3. Select the Picture & Video or Sound line and add an image, a video, or a sound file. 4. Select the Message line.5. Enter the text and press [ ].6. Press <Options> to access the following options for editing the message:•Edit: edit the subject or text of your message.•Change image/Change video/Change sound: replace the added image, video clip, or audio to another one.•Add page: add pages. Move to each page by pressing [Left] or [Right] on the message screen.•Delete page: delete the added page.•Edit page: set the page duration or move the current page to the next or previous page.•Attach: attach name cards or calender data as a data format attachment, or document files stored in the Other files folder.•Remove subject/Remove media/Remove sound/Remove message: clear the subject, image, audio, or text.7. When you have finished, press <Options> and select Send.8. Enter a phone number or e-mail address.To send the message to more than one recipient, fill in additional destination fields.9. Press [ ].Email (Menu 5.1.3)You can send and receive e-mails that include text, audio, and images. To use this feature, you need to subscribe to an e-mail service and set up your e-mail account and profile.p. 601. Select the Subject line.2. Enter the subject of your e-mail and press [ ].3. Select the Message line.4. Enter the e-mail text and press [ ].• The maximum size allowed for a message can differ, depending on the your service provider.• Depending on the file type, some files may not be able to be forwarded.
50Menu functions5. Select the File attach line and select one of the following options to add files:•Add image/Add videos/Add sounds/Add music: add items stored in the phone’s memory.•Add other files: add document files stored in the Other files folder.•Add from memory card: add files stored on a memory card.•Attach: attach name cards or calender data as data format attachments.6. Press <Options> to access the following options to edit the e-mail:•Edit: edit the subject or text.•Remove subject/Remove message: clear the subject or text.•Remove: delete the selected attachment or all attachments.•Remove all attachments: delete all attachments.7. When you have finished, press <Options> and select Send.8. Enter an e-mail address.To send the e-mail to more than one recipient, fill in additional destination fields. 9. Press [ ].My messages (Menu 5.2)Use this menu to access messages you have received, sent, or which have failed in sending.Inbox (Menu 5.2.1)This folder stores all of the messages you have received, except for e-mails.Viewing a messageThe following icons may appear on the message list to show the message type:•SMS• MMS• MMS notifications• Push messages
Menu functions Messages(Menu 5)51Using message optionsWhile viewing a message, press <Options> to access the following options:SMS messages•Reply via: reply to the sender via SMS or MMS. •Forward: forward the message to other people.•Delete: delete the message.•Move to phone/Move to SIM: move the message between the SIM card and the phone’s memory.•Add to block list: add the sender’s number to the Block list.•Cut address: extract URLs, e-mail addresses, or phone numbers from the message.•Cut media: save media content from the message into your phone’s memory.•Print via Bluetooth: print the message by connecting the phone to a printer via Bluetooth.•Protection: protect the message from being deleted.MMS notifications/MMS messages•Retrieve: retrieve the MMS message from the server.•Reply via SMS: send a reply message via SMS.•Reply via MMS to: send a reply message via MMS to the sender or all recipients.•Forward: forward the message to other people. •Delete: delete the message.•Add to block list: add the sender’s number to the Block list.•Cut address: extract URLs, e-mail addresses, or phone numbers from the message.•Cut media: save media content from the message into your phone’s memory.•Properties: access the message properties.Push messages•Go to URL: connect to the URL specified in the message.•Delete: delete the message.A ! icon next to a message means that the message is of high priority. A grey-coloured message icon indicates low priority.
52Menu functions•Cut address: extract URLs, e-mail addresses, or phone numbers from the message.Delivery reports•Delete: delete the report.Configuration messages•Install: apply the configuration value in the message to the phone.•Delete: delete the message.•Cut address: extract URLs, e-mail addresses, or phone numbers from the message.•Protection: protect the message from being deleted.Draft (Menu 5.2.2)This folder stores messages you have saved to send at a later time.When you select an SMS or e-mail message, it opens in Edit mode so that you can edit and/or send the message.When you select an MMS message, it opens in Preview mode as would a message from the Inbox. To edit the MMS message, press <Options> and select Edit.Outbox (Menu 5.2.3)This folder stores messages that the phone is attempting to send or has failed to send.While viewing a message, press <Options> to access the following options:•Open file: open the attached file.•Save file: save the attached file in your phone’s memory.•Send again: retry sending the message.•Forward: forward the message to other people.•Delete: delete the message.•Move to phone/Move to SIM: move the message between the SIM card and the phone’s memory.•Print via Bluetooth: print the message by connecting the phone to a printer via Bluetooth.•Protection: protect the message from being deleted.•Properties: access the file properties.
Menu functions Messages(Menu 5)53Sentbox (Menu 5.2.4)This folder stores messages that you have sent successfully.While viewing a message, press <Options> to access the following options:•Open file: open the attached file.•Save file: save the attached file in your phone’s memory.•Forward: forward the message to other people.•Delete: delete the selected message.•Move to phone/Move to SIM: move the message between the SIM card and the phone’s memory.•Print via Bluetooth: print the message by connecting the phone to a printer via Bluetooth.•Protection: protect the message from being deleted.•Properties: access the file properties.Email box (Menu 5.2.5)This folder stores e-mails that you have received.Viewing an e-mail1. Press <Select> when Check new mail is displayed to get new e-mails from the server. The phone checks the e-mail server and downloads new e-mails. The following icons may appear on the list to show the e-mail status:• Retrieved from the server• Being retrieved• Failed to retrieve2. Select an e-mail or header.3. Press [Volume] to view other pages in the e-mail. Press and hold [Volume] to move to the first or last page in the e-mail.4. Press [ ] or [ ] to view the next or previous e-mail.A ! icon next to a message means that the message is of high priority. A grey-coloured message icon indicates low priority.
54Menu functionsUsing e-mail optionsWhile viewing the e-mail or header, press <Options> to access the following options:•Retrieve: retrieve the body of the e-mail from the e-mail server.•Open file: open the attached file.•Save file: save the attached file in your phone’s memory.•Reply to: send a reply to the sender or all recipients.•Forward: forward the e-mail to other people.•Delete: delete the e-mail from the phone’s memory or from both the phone’s memory and the e-mail server.•Add to block list: add the sender’s e-mail address or subjects to the Block list.•Cut address: extract URLs, e-mail addresses, and phone numbers.•Cut attachment: save the selected attachment or all attachments from the e-mail to your phone’s memory.•Print via Bluetooth: print the message by connecting the phone to a printer via Bluetooth.•Protection: protect the message from being deleted. •Properties: access the e-mail properties.My folder (Menu 5.2.6)Use this menu to view the messages you have moved to this folder using the Move to my folder option while viewing a message list.Templates (Menu 5.3)Use this menu to make and use templates of frequently used messages.Text template (Menu 5.3.1)You can create SMS templates with the sentences you use frequently so that you can retrieve and insert them when composing an SMS message.Creating a template1. Select an empty location.2. Enter a message and press [ ].
Menu functions Messages(Menu 5)55Using template optionsFrom the text template list, press <Options> to access the following options:•Edit: edit the template.•Send message: create and send a new message.•Delete: delete the selected template.MMS template (Menu 5.3.2)When you access this menu, you can view the list of templates.From the template list, press <Options> to access the following options:•View: open the selected template.•Send message: create and send a new message.•Edit: edit the selected template.•Add new: add a new template.•Delete: delete the selected template or all templates. You cannot delete the preset templates.Delete all (Menu 5.4)Use this menu to delete all messages in each message type at once.1. Press [ ] to select the message folders you want.2. Press <Delete>.3. Press <Yes> to confirm the deletion.Settings (Menu 5.5)Use this menu to set up various options for using the messaging service.Text message (Menu 5.5.1)You can configure SMS settings.•Send settings: set up the options for sending SMS messages:Reply path: allow recipients to reply to you through your SMS server. Delivery report: set the network to inform you when messages have been delivered.
56Menu functionsCharacter support: select a character encoding type. If you select Auto, the phone switches the encoding type from GSM-alphabet to Unicode if you enter an unicode character. Use of Unicode encoding will reduce the maximum number of characters in a message to about half. If this menu is not shown, your phone provides the Auto character encoding by default.Validity period: set the length of time your messages are stored in the SMS server.Message type: set the default message type. The network can convert messages into the selected format.Service centre: store or change the number of SMS server.•Block number: set the Blocked number list to reject SMS messages from specific phone numbers.Multimedia message (Menu 5.5.2)You can configure MMS settings.•Send settings: set up the options for sending MMS messages:Delivery report: set the network to inform you when messages have been delivered.Address hiding: set your address to be hidden from the recipient’s phone.Read reply: request a report from each recipient as to when your message was read by the recipient.Priority: set the priority level of your messages.Expiry date: set the length of time your messages are stored in the MMS server.Delivery after: set a time delay before messages are sent.Send size: select a maximum size of attached items allowed for messages.•Receive settings: set up the options for receiving MMS messages:Anonymous reject: reject messages from unknown senders.Advert allowed: accept advertisements.Report allowed: set the network to inform the sender when a message has been delivered to you.
Menu functions Messages(Menu 5)57Home reception: determine if your phone retrieves new messages automatically when you are in your home service area.Roaming reception: determine if your phone retrieves new messages automatically when you are roaming on another network.Home reception and Roaming reception have the following options:- Automatic: the phone automatically retrieves messages from the server.- Reject: the phone rejects all messages.- Manual: the phone displays notifications. Use the Retrieve option to manually download new messages.•MMS profiles: configure required network settings for MMS.Current profile: select a profile.Profile settings: customise the options for each profile:- Profile name: assign a name to the MMS profile. - Server URL: enter the address of your MMS server.- Proxy: connect to the GPRS network using the proxy server.- GPRS settings: customise the settings required for connecting to the GPRS network.when the proxy is set to Enable:- IP address: enter the gateway address.- Port: enter the port number.- APN: enter the access point name used for the address of the GPRS network.- Login ID: enter the user ID.- Password: enter the password.when the proxy is set to Disable:- DNS1: enter the primary address.- DNS2: enter the secondary address.- APN: enter the access point name used for the address of the GPRS network.- Login ID: enter the user ID.- Password: enter the password.
58Menu functions- Version: select an available OMA version and maximum size limit for sending or receiving messages.•Block number: set the Blocked number list to reject MMS messages from specific phone numbers.Email (Menu 5.5.3)You can configure e-mails settings.•Send settings: set up the options for sending e-mails:Send copy to self: send a copy of your e-mail to your e-mail account.Delivery confirm: set the network to inform you when e-mails have been delivered.Read confirm: send a request for a reply along with your e-mail.Priority: select the priority level of your e-mail.Include signature: attach your name, phone number, or a simple memo to e-mails.Edit name: edit the name in your signature.Edit telephone number: edit the phone number in your signature.Edit note: edit the tag line in your signature.•Receive settings: set up the options for receiving e-mails:Check interval: determine how often the phone checks the server for incoming e-mails.If you select Not used, you can use the Check new mail feature to check your e-mail manually.Read reply: determine whether or not the phone sends a read-reply for incoming e-mails.If you select Announce, the phone asks you to send a read-reply.Retrieve option: set whether the phone downloads e-mail headers only or e-mail headers and bodies both.Delete option: determine whether e-mails are deleted immediately or the next time you connect to the server.Depending on your service provider, it may not be possible to support the maximum limit 295KB. In this case, try again after changing the setting to 100KB.
Menu functions Messages(Menu 5)59Reject if over: determine the maximum size for incoming e-mails. Your phone will reject e-mails that exceed the specified size.Leave a copy of messages on the server: leave the copies of e-mails in the server after retrieving.•Email account: set up your e-mail account(s) and select the one to be used:Current account: select an account.Account settings: configure up to five e-mail accounts using different e-mail servers. The options are available for each account:- In use: select this option to use the account and to display the account in Email box.- Account name: enter a name for the currently selected account.- User name: enter a name to be displayed as the sender’s name in your outgoing e-mails.- Email address: enter your e-mail address.- Reply address: enter your e-mil address to be used when the recipient sends a reply.- User ID: enter your e-mail ID.- Password: enter your e-mail password.- SMTP server: enter the IP address or host name of the outgoing e-mail server. - SMTP port: enter the SMTP port number.- Protocol type: select the protocol for the incoming e-mail server. The remaining options depend on the protocol type setting. When the protocol type is POP3:- POP3 server: enter the IP address or host name of the server that receives your e-mail. - POP3 port: enter the POP3 port number.- APOP login: connect to the server by using the APOP login scheme when this option is selected.- Secure connection: use a secure connections for e-mail service.When the protocol type is IMAP4:- IMAP4 server: enter the IP address or host name of the server that receives your e-mail.- IMAP4 port: enter the IMAP4 port number.You cannot change e-mail account settings while an e-mail is being sent or retrieved.
60Menu functions- Include attachments: select this option to receive attachments with e-mails.- Max. Emails retrieved: set the number of headers you will retrieve from the server.- Secure connection: use a secure connections for e-mail service.•Email profile: configure the network settings required to send or receive e-mails.Current profile: select a profile.Profile settings: configure up to five e-mail profiles. For each profile, the options are required to connect to the GPRS network:- Profile name: enter a name for the e-mail profile.- APN: enter the access point name used for the GPRS network address.- Login ID: enter the user ID.- Password: enter the password.- DNS1: enter the primary address.- DNS2: enter the secondary address.•Block list: specify e-mail addresses or subjects you want to reject.Push message (Menu 5.5.4)You can change the settings for receiving push messages from the wireless web server. •Receive: set how your phone receives push messages.•Service centre: enter the address of the server from which you want to receive push messages.Broadcast messages(Menu 5.6)The cell broadcast service delivers short messages on various topics such as the weather or traffic.Use this menu to change the settings for the service and to access broadcast messages.•Read: open received messages.The Temporary box saves network messages until the phone is switched off.You cannot change e-mail profile settings while an e-mail is being sent or retrieved.
Menu functions File manager(Menu 6)61The Archive box saves network messages indefinitely. Press <Options> and select Save when a text notification appears to save to the Archive box.•Receive: enable or disable the reception of broadcast messages.•Channel: specify the channels from which you receive broadcast messages.•Language: select the language in which broadcast messages display.Please contact your service provider for details.Memory status(Menu 5.7)Use this menu to view the memory status for text, multimedia, e-mail, or push messages.File manager(Menu 6) The File manager menu allows you to access images, videos, voice memos, music files, sounds, and other files stored in the phone’s memory or on a memory card.To access this menu, press <Menu> in Idle mode and select File manager. Images(Menu 6.1)This menu displays photos you have taken and images you have downloaded, received in messages, or imported from your computer.Viewing an image1. Select an image folder.2. Select an image.Using image optionsWhile viewing an image, press <Options> to access the following options:•List: return to the image list.
62Menu functions•Send via: send the file via MMS, e-mail, or Bluetooth.•Set as: set the file as your wallpaper or as a caller ID image for a Phonebook entry.•Edit: edit the image using the Image editor if it is a photo taken by the camera on the phone.•Move to: move the file to another folder.•Copy to card: copy the selected file or all files to a memory card.•Delete: delete the selected file.•Rename: change the name of the file.•Slide show: set all photos to display as a slide show. You can select a time interval between photos.•Share for Bluetooth: share the files with other Bluetooth devices or hide the files so that other Bluetooth devices cannot access them.•Print via: print the file by connecting the phone to a printer via Bluetooth or USB.•Protection: protect the file from being deleted.•Properties: access the file properties.Viewing a photo on a TVYou can use a TV to view the photos you have stored. You first need to set the video system for your TV in the TV out menu.p. 791. With the TV switched on, connect your phone to the TV with the TV out cable, as shown.2. Switch the TV to External Input mode.The display switches to TV Out mode and you can view the phone’s display on the TV screen.• Depending on your particular TV model, the location and shape of the video input and audio output ports may vary. Match cable connector and TV port colours.• Do not plug in connectors with a wet hand.
Menu functions File manager(Menu 6)633. Access a photo in the Photos folder.Videos (Menu 6.2)This menu displays video clips you have recorded, downloaded, or received in messages, or imported from your computer.Playing a video clip1. Select a video folder.2. Select a video clip.During playback, you can use the following keys:Viewing a video clip on a TVYou can use a TV to view the video clips you have stored.p. 62Music (Menu 6.3)This menu displays MP3 music files you have downloaded, or received in messages, or imported from your computer.1. Select a sound folder.• Depending on the video’s system, the image vibrates or in some other may be less than optimal.• Depending on the video quality, some video files may not display.• You cannot use the Bluetooth A/V headset and the zooming feature in TV Out mode.Video clips recorded on other devices, such as camcorders, may not play correctly.Key FunctionPauses or resumes playback.Up Opens the play list.Left Goes to the previous file. Moves backward in a file when pressed and held.Right Skips to the next file. Skips forward in a file when pressed and held.Volume Adjusts the volume.Down Stops playback.Key Function
64Menu functions2. Select a file. The MP3 player opens.p. 37Sounds (Menu 6.4)This menu displays the voice memos you have recorded, and sound files you have downloaded, received in messages, or imported from your computer.Playing a sound clip1. Select a sound folder.2. Select a sound clip. For a voice memo, see Voice recorder.p. 40During playback, you can use the following keys:From a sound screen, press <Options> to access the following options:•List: return to the sound list.•Send via: send the selected file via MMS, e-mail, or Bluetooth.•Set as: set the file as your ringtone, as a alert melody for a Phonebook entry, or as a alarm melody.•Move to: move the file to another folder.•Copy to card: copy the files to a memory card.•Delete: delete the file.•Rename: change the name of the file.•Share for Bluetooth: share the files with other Bluetooth devices or hide the files so that other Bluetooth devices cannot access them.•Protection: protect the file from being deleted.•Properties: access the file properties.Key DescriptionUp/Down/Volume Adjusts the volume.Left Goes to the previous file.Right Skips to the next file.
Menu functions File manager(Menu 6)65Other files (Menu 6.5)Use this menu to view various document files and files stored in the phone’s memory without corruption. Available file formats are Microsoft Word, Adobe PDF, Plain text, and so on. Viewing a file1. Select a file folder.2. Select a file. The file viewer opens.Use the following keys to view the document: • Depending on the file size or memory capacity of Picsel File Viewer, a file may not open properly.• If a document file contains languages unsupported by the file viewer, the content of the document will not display correctly.Keys FunctionVolume Zoom in or out.Up/Down/Left/Right Pans around the page.Fits the document to the page size.1Changes the panning mode.2Returns to the first page.4Goes to the previous page.5Rotates the page.6Goes to the next page.7Changes the view mode to the screen width.8Moves to the last page.9Changes the view mode to the screen height.Changes the view mode.Shows or hides the control bar. This key is only available in Full screen mode.Keys Function
66Menu functionsUsing document optionsWhile viewing a document, press <Options> to access the following options:•Normal screen view/Full screen view: change the display of the file viewer.•Zoom: zoom in or out.•Fit to: fit the document to the page size, screen width, or screen height.•Go to: move to another page of the document.•Rotate: rotate the document.•Screen panning/Normal panning: change the panning mode to by screen or by preset pixel.•Show control bar/Hide control bar: show or hide control bar of the file viewer.•Send via: send the file via MMS, e-mail, or Bluetooth.•Move to card: move files to a memory card.•Copy to card: copy files to a memory card.•Delete: delete the selected file.•Rename: change the name of the file.•Share for Bluetooth: share the files with other Bluetooth devices or hide the files so that other Bluetooth devices cannot access them.•Print via: print the file by connecting the phone to a printer via Bluetooth or USB.•Protection: protect the file from being deleted.•Properties: access the file properties.Memory card (Menu 6.6)Use this menu to access the files stored on a memory card. This menu is shown only when a memory card is inserted into the phone.Memory status (Menu 6.7)You can check the total amount of memory for media items and the amount of memory currently in use in each media box.
Menu functions Calendar(Menu 7)67Calendar(Menu 7) The Calendar feature enables you to keep track of your schedule.To access this menu, press <Menu> in Idle mode and select Calendar.Month view (Menu 7.1)Use this menu to keep track of your monthly schedule.Consulting the calendarWhen you access the Month view menu, the calendar in Month view appears with today’s date indicated by a green box. Selecting a day• Press [Left] or [Right] to move by day.• Press [Up] or [Down] to move by week.• Press [Volume] to move by month.Using calendar optionsPress <Options> to access the following options:•View mode: change the view mode of the calendar.•Create: add a new event.•Go to: go to the current date or a specific date.•Sort by: sort items by type of event.•Delete: delete events using various deleting options.•Missed alarm events: access events whose alarms you have missed.•Memory status: access the memory information for the event items stored on the calendar.Creating an eventYou can store scheduled events, anniversaries, and To do items on the calendar. More than one event per day can be stored.Entering a new scheduled event 1. Select a date on the calendar.2. Press <Options> and select Create → Schedule or Miscellaneous.3. Enter information or change the settings:•Subject: enter a title for the event.•Details: enter event details.
68Menu functions•Start date and Start time: enter the starting date and time for the event.•AM/PM: select AM or PM in 12-hour time format.•End date and End time: enter the ending date and time for the event.•AM/PM: select AM or PM in 12-hour time format.•Location: (for Schedule) enter information about the event location. •Alarm: select to set an alarm for the event. •before: set how long before the event the alarm is to alert you.•Alarm tone: select an alarm tone.•Repeat: (for Schedule) select to set the event to recur.•until: (for Schedule) select a repeat unit and set the date to end repeating.4. Press <Save> to save the event.Entering a new anniversary1. Select a date on the calendar.2. Press <Options> and select Create → Anniversary.3. Enter information or change the settings:•Occasion: enter information about the anniversary.•Date: enter the date.•Alarm: select to set an alarm for the anniversary. •before: set how long before the event the alarm is to alert you.•Alarm time: enter the time for the alarm to ring.•AM/PM: select AM or PM in 12-hour time format.•Alarm tone: select an alarm tone.•Repeat every year: set the phone to remind you of the anniversary every year.4. Press <Save> to save the event.Entering a To-do item1. Select a date on the calendar.2. Press <Options> and select Create → To do.
Menu functions Calendar(Menu 7)693. Enter information or change the settings:•To do: enter information about the task.•Start date: enter the starting date.•Due date: enter the ending date.•Priority: select a priority level.4. Press <Save> to save the event.Viewing an eventOnce you have scheduled events, the event icons and the number of events for a specific day appears at the bottom of the calendar.Accessing an event1. Select a date on the calendar to display the events for that day. 2. Select an event to view its details.3. Press [Left] or [Right] to access the other events scheduled for the selected day.Using event optionsWhile viewing an event, press <Options> to access the following options:•Edit: edit the event.•Create: add a new event.•Send via: send the event via SMS, MMS, e-mail, or Bluetooth.•View mode: change the view mode of the calendar.•Done/Undone: change the status of the to-do item.•Delete: delete the event.•Print via Bluetooth: print the event by connecting the phone to a printer via Bluetooth.Week view (Menu 7.2)You can view events for the selected week. A cell on the timetable indicates the presence of event information. Blue boxes indicate scheduled events, and green boxes indicate miscellaneous event. Select the cell that contains the event you want.• Scheduled events • Anniversaries• To-do items • Miscellaneous events
70Menu functionsDay view (Menu 7.3)You can view events for the selected date. For an anniversary, you can view the remaining dates for the anniversary on the event list.Select an event to view its details. The following icons will be displayed according to the event’s type and status:• Alarm set • Recurring event• Completed to-do item• To-do item priority (Red: high, Blue: normal, and Grey: low)Camera(Menu 8) You can use the camera module embedded in your phone to take photos and record videos.To access this menu, press <Menu> in Idle mode and select Camera, or press and hold [ ].Take a photo (Menu 8.1)The camera produces JPEG photos. Taking a photo1. If the phone is closed, open the phone.2. Press and hold [ ]. The image to be captured appears on the display.3. Aim the camera lens at the subject.• Do not take photos of people without their permission.• Do not take photos in a place where cameras are not allowed.• Do not take photos in a place where you may interfere with another person’s privacy.When you take a photo in direct sunlight or in bright conditions, shadows may appear on the photo.
Menu functions Camera(Menu 8)71• Press < > to use the camera options. See the next section.• Use the keypad to change the camera settings or switch to other modes.p. 724. Press [ ] to take a photo. The photo is saved in the Photos folder.Using camera options in Capture modeIn Capture mode, press < > to access the following options:•Record video: switch to Record mode.•Shooting mode: take a photo in the following modes:Single shot: take a photo in the normal mode.Multi shot: take a series of action stills. You can select the number of photos the camera will take.Mosaic shot: take several stills and save them in one frame. You can select the layout.•Effects: change the colour tone or apply a special effect.•Frames: apply a decorative frame.•Flash: determine the use of the flash.•Timer: set a time delay before the camera takes a photo.•Go to photos: display the photos stored in the Photos folder.•Settings: change the default settings for taking a photo.Function: change the following image settings:Size: select an image size. Quality: select an image quality.View finder: select a preview mode.Scene programs: use Night shot mode.5.To Pressuse photo options <Options>.p. 73delete the photo [C] and then <Yes>.return to Capture mode <Back>.
72Menu functionsMetering exposure: select a method to determine the exposure of an image, based on a specific area of the image.White balance: adjust the colour balance of the photo. You can make your photo appear warmer or cooler.ISO: change the ISO setting, which controls the sensitivity of your camera. For low light situations, select a higher ISO number. The higher the ISO number, the faster the camera shutter functions and the more sensitive the camera is to light. Higher ISO settings may bring some distortion to an image.Setup: change the following camera settings:Shutter sound: select the sound that you hear when you press the shutter, [ ] or [ ].Zoom sound: turn the sound effect for zooming on or off.Brightness sound: turn the sound effect for brightness adjustment on or off.Default name: change the default prefix of the photo name.•Camera short cuts: view the functions of the keys you can use in Capture mode.Using the keypad in Capture modeYou can use the keypad to customise your camera settings in Capture mode.Key FunctionVolume Up Flips the image vertically.Left/Right Adjusts the image brightness.Up/Down Zooms in or out.1Switches to Record mode.p. 732Changes the image size.3Changes the image quality.4Changes the shooting mode and the number of photos.5Changes the colour tone or applies a special effect.6Changes the ISO setting.
Menu functions Camera(Menu 8)73Using photo optionsAfter saving a photo, press <Options> to access the following options:•Take another: return to Capture mode.•Send via: send the file via MMS, e-mail, or Bluetooth.•Set as: set the photo as your wallpaper or as a caller ID image for a Phonebook entry.•Edit: edit the image using the Image editor. p. 40•Delete: delete the file.•Rename: change the name of the file.•Go to photos: access the Photos folder.•Share for Bluetooth: share the selected file or all files with other Bluetooth devices or hide the selected file or all files so that other Bluetooth devices cannot access them.•Print via: print the file by connecting the phone to a printer via Bluetooth or USB.•Protection: protect the file from being deleted.•Properties: access the file properties.Record video (Menu 8.2)You can record a video of what is displayed on the camera screen and save it as a .3gp file.Recording a video1. In Capture mode, press [1].2. Aim the camera lens at the subject. • Press < > to use the camera options. See the next section.• Use the keypad to change the camera settings or switch to other modes.p. 753. Press [ ] to start recording.7Selects a decorative frame.8Sets the timer.9Goes to the Photos folder.p. 610Determines the use of the flash.Changes the preview mode.Changes the white balance settings.Key Function
74Menu functionsTo pause or resume, press [ ].4. Press the right soft key. The video is saved in the Videos folder.Using camera options in Record modeIn Record mode, press < > to access the following options:•Take a photo: switch to Capture mode.•Effects: change the colour tone or apply a special effect.•Flash: determine the use of the flash.•Timer: set a time delay before the camera starts recording a video.•Go to videos: access the Videos folder.•Settings: change the following settings for recording a video:Recording mode: select a video recording mode.Select Normal to record a video within the limit of the currently available memory.Select Limit of MMS to record a video suitable for an MMS message.Size: select an image size.Quality: select an image quality.View finder: select a preview mode.Audio rec.: turn on or off the audio.White balance: adjust the colour balance of the image. You can make you video appear warmer or cooler.Scene programs: use Night shot mode.Zoom sound: turn the sound effect for zooming on or off.Brightness sound: turn the sound effect for brightness adjustment on or off.5.To Pressplay back the video clip [ ].use video options the left soft key.p. 75delete the video [C] and then <Yes>.return to Record mode the right soft key.
Menu functions Camera(Menu 8)75Default name: change the default prefix of the video name.•Camcorder short cuts: view the functions of the keys you can use in Record mode.Using the keypad in Record modeYou can use the keypad to customise your camera settings in Record mode:Using video optionsAfter saving a video clip, press the left soft key to access the following options:•Record another: return to Record mode.•Send via: send the file via MMS, e-mail, Bluetooth.•Set as caller ID: set the file as a caller ID image for a Phonbook entry.•Delete: delete the file.Key FunctionVolume Up Flips the image vertically.Left/Right Adjusts the image brightness. Up/Down Zooms in or out.1Switches to Capture mode.p. 702Changes the image size.3Changes the image quality.4Changes the video recording mode.5Changes the colour tone or applies a special effect.6Turns on or off the audio.7Switches to Night shot mode.8Sets the timer.9Goes to the Videos folder.p. 630Determines the use of the flash.Changes the preview mode.Changes the white balance settings.Key Function
76Menu functions•Rename: change the name of the file.•Go to videos: access to the Videos folder.•Share for Bluetooth: share the file with other Bluetooth devices or hide the file so that other Bluetooth devices cannot access it.•Protection: protect the file from being deleted.•Properties: access the file properties.Go to photos (Menu 8.3)Use this menu to access a list of photos you have taken.p. 61Go to videos (Menu 8.4)Use this menu to access a list of videos you have recorded.p. 63Settings(Menu 9) The Settings menu provides you with various setting options to customise the phone to your preferences and needs. You can also reset the settings to their default values.To access this menu, press <Menu> in Idle mode and select Settings.Time & Date(Menu 9.1)Use this menu to set the current time and date on your phone.•Time: enter the current time.•Home zone: press [ ] and set the home time zone. Select the city that corresponds to your home zone. To set the daylight saving time, select Set daylight saving time.•AM/PM: select AM or PM in 12-hour time format.•Time format: select the time format.•Set date: enter the current date.•Date format: select the date format.
Menu functions Settings(Menu 9)77•Week start day: set which day of the week the calendar starts with.•Auto update: select to apply daylight savings time to the current time, if Set daylight saving time in Home zone is selected.Phone settings(Menu 9.2)Many different features of your phone’s system can be customised to suit your preferences.Language (Menu 9.2.1)Use this menu to select one of several languages for the display text.Greeting message (Menu 9.2.2)Use this menu to enter the greeting that is displayed briefly when the phone is switched on.Slide settings (Menu 9.2.3)Use this menu to set how the phone reacts when you open it for an incoming call, and when you close it while using a function.•Up: set whether or not to answer a call by opening the phone.•Down: set whether or not the phone maintains the menu you are using when you close the phone.Short cut (Menu 9.2.4)You can use the Navigation keys as shortcut keys to access specific menus directly from Idle mode. Use this menu to change these shortcut assignments.Assigning a shortcut to a key1. Select the key to be used as a shortcut key.2. Select the menu that will be assigned to the key.Using shortcut optionsPress <Options> to access the following options:•Change: change a shortcut menu.•Remove: deactivate the shortcut assignment to the selected key.•Remove all: deactivate all shortcut assignments.When you set Down to Continue operation, the keypad lock works only in Idle mode.
78Menu functionsVolume key(Menu 9.2.5)Use this menu to set whether the phone mutes the call ringer or rejects a call if you press and hold [Volume] when a call comes in.USB settings (Menu 9.2.6)Use this menu to select a USB mode.•Modem: select to use your phone as a modem.•Mass storage: select to access a memory card, if a memory card is inserted.•Pictbridge: select to connect your phone to a PictBridge-compatible printer.Extra settings (Menu 9.2.7)You can turn the automatic redialing or answering features on or off.•Auto redial: set the phone to make up to ten attempts to redial a phone number after an unsuccessful call.•Anykey answer: answer an incoming call by pressing any key, except [ ] or <Reject>. •Voice clarity: remove extraneous noise and increase call quality so that the person with whom you are speaking can hear you clearly even if you are in a noisy place.Display settings(Menu 9.3)Use this menu to change settings for the display and light.Wallpaper(Menu 9.3.1)You can change the background image that is displayed in Idle mode.Main menu style(Menu 9.3.2)You can select a display style for the main menu screen.Text display(Menu 9.3.3) You can change the display settings for the text displayed on the idle screen.•Text position: select a position. If you do not want text to display in Idle mode, select Off.•Text style: select a font style.
Menu functions Settings(Menu 9)79•Text colour: select a font colour.Skin(Menu 9.3.4) You can select a skin colour pattern for Menu mode.LCD brightness(Menu 9.3.5)You can adjust the brightness of the display for varying lighting conditions.Backlight(Menu 9.3.6) You can select the length of time the backlight stays on or the length of time the display stays on in Dim mode, in which the backlight is off.•On: select the length of time the backlight stays on.•Dim: select the length of time the display stays on in Dim mode after the backlight turns off. After a specified time, the display turns off.•During charging: set whether or not to activate Dim mode while charging your phone.Dialling display(Menu 9.3.7)Use this menu to select a font size or colour, or background colour for the numbers entered while dialling.Calendar(Menu 9.3.8)Use this menu to display the calendar of the current month on the idle screen.Show caller information(Menu 9.3.9)Use this menu to set the phone to display missed call notifications with the most recently missed caller’s information.TV-out(Menu 9.3.10)Use this menu to select the video system for a TV. Sound settings(Menu 9.4)Use this menu to customise various sound settings.Incoming call(Menu 9.4.1)Use this menu to select a volume level and alert type for incoming calls.•Ring tone: select a ringtone for the call ringer.•Volume: select a ringer volume.•Alert type: specify how you are to be informed of incoming calls.
80Menu functionsKeypad tone(Menu 9.4.2)Use this menu to select the tone that the phone sounds when you press a key. Message tone(Menu 9.4.3) Use this menu to set up the ringer for incoming SMS messages, MMS messages, e-mails, and CB messages individually. •Tone: select one of several message tones. •Alert type: specify how you are informed when a message comes in. •Repetition: specify how often the phone informs you of a new message.Power on/off(Menu 9.4.4)Use this menu to select the melody that the phone sounds when it is switched on or off. Slide tone(Menu 9.4.5)Use this menu to select the tone that the phone sounds when you open or close the phone. Quiet mode(Menu 9.4.6)Use this menu to set how the phone acts to alert you to a specific event in Quiet mode. Extra tones(Menu 9.4.7) Use this menu to customise additional tones for the phone. •Minute minder: set the phone to beep every minute during an outgoing call to keep you informed of the length of your call.•Connection tone: set the phone to beep when an outgoing call is connected to the system.•Alerts on call: set the phone to beep when you receive a new message or when the time for an alarm comes during a call.•Indicative tones: set the phone to beep when a pop-up window displays.Network services(Menu 9.5)Use this menu to access network services. Please contact your service provider to check their availability and subscribe to them, if you wish.You can adjust the keypad tone volume using [Volume] in Idle mode.
Menu functions Settings(Menu 9)81Call diverting(Menu 9.5.1)This network service reroutes incoming calls to a phone number that you specify.1. Select a call diverting option:•Divert always: divert calls.•Busy: divert calls when you are on another call.•No reply: divert calls when you do not answer the phone.•Unreachable: divert calls when you are not in an area covered by your service provider or when your phone is switched off.•Cancel all: cancel all call diverting options.2. Select the type of calls to be diverted.3. To activate call diverting, select Activate. Otherwise, select Deactivate.4. Move to the Divert to line.5. Enter the number to which calls are to be diverted and press <OK>.6. If you selected No reply, move to the Sec line and select the length of time the network delays before diverting a call.Call barring (Menu 9.5.2)This network service allows you to restrict your calls.1. Select a call barring option:•All outgoing: prohibit outgoing calls.•International: prohibit international calls.•International except home: only allow calls to numbers within the current country when you are abroad, and to your home country.•All incoming: prohibit incoming calls.•Incoming while abroad: prohibit incoming calls when you use your phone outside of your home country.•Cancel all: cancel all call barring settings, allowing to be sent and received normally.•Change barring password: change the call barring password obtained from your service provider.2. Select the type of calls to be barred.
82Menu functions3. Press <Activate>. To deactivate call barring, press <Deactivate>.4. Enter the call barring password supplied by your service provider and press <OK>.Call waiting(Menu 9.5.3)This network service informs you when someone is trying to reach you while you are on another call.1. Select the type of calls to which the call waiting option will apply.2. Press <Activate>. To deactivate call waiting, press <Deactivate>. Network selection(Menu 9.5.4)This network service allows you to either automatically or manually select the network used when roaming outside of your home area. You can select a network other than your home network only if there is a valid roaming agreement between the two.Caller ID(Menu 9.5.5)This network service allows you to prevent your phone number from being displayed on the phone of the person being called. However, some networks do not allow the user to change this setting.If you select Default, the phone will use the default setting provided by the network.Voice mail server(Menu 9.5.6)Use this menu to store the number of the voice mail server and access your voice mails.•Connect to voice mail: connect to the voice mail server to allow you to listen to your messages.•Voice server number: enter the voice mail server number.Band selection(Menu 9.5.7)For the phone to make and receive phone calls, it must register with an available network. Your service provider can give you the voice mail server number.
Menu functions Settings(Menu 9)83Your phone can handle any of the following types of networks: Combined GSM 900/1800, Combined GSM 850/1900, and GSM 850/900/1800/1900.The country where you purchased your phone determines the default band that it uses. When you travel abroad, you must remember to change to an appropriate band. Bluetooth (Menu 9.6) Using Bluetooth wireless, you can connect the phone wirelessly to other Bluetooth devices and exchange data with them, talk hands-free, or control the phone remotely.Bluetooth technology allows free wireless connections between all Bluetooth-compliant devices within a range of 10 metres. Since the devices communicate using radio waves, they do not need to be in line of sight to each other.Setting up the Bluetooth featureThe Bluetooth menu provides the following options:•Activation: activate or deactivate the Bluetooth feature.•My devices: search for connectable Bluetooth devices. See the next section.•My phone’s visibility: allow other Bluetooth devices to connect to your phone.•My phone’s name: assign a Bluetooth device name to your phone, which is then displayed on other devices.•Secure mode: determine if the phone asks for your confirmation when other devices access your data.• If there are obstacles between the devices, the maximum operating distance may be reduced.• It is recommended that you can don’t use the Bluetooth feature while using multimedia features such as voice recorder, camera, and Media player, or vice versa for better performance.• Some devices may not be compatible with your phone.
84Menu functions•Bluetooth services: display available Bluetooth services. Searching for and pairing with a Bluetooth device1. From the Bluetooth setting options, select My devices.2. Select Search new device.After searching, a list of devices to which you can connect displays. The following icons indicate the kind of device:The colour of the icon indicates the status of the device:• Grey for unpaired devices• Blue for paired devices• Red for devices that are currently connected to your phone3. Select a device.4. Enter a Bluetooth PIN code and press <OK>. This code is used just once and you don’t need to memorise it.When the owner of the other device enters the same code, pairing is finished.Using device optionsFrom the device list, press <Options> to access the following options:•Connect: connect to the currently selected device. You need to enter the Bluetooth PIN code.•Disconnect: end the connection with the device.•Browse files: search for data from the device and import data directly to your phone.•Service list: access the Bluetooth service list of the device.•Rename: rename the paired device.• A/V headset • Mobile phone• Computer • PDA• Unknown device • Printer• Headset/Hands-free car kitSome devices, especially headsets or hands-free car kits, may have a fixed Bluetooth PIN code, such as 0000. If the other device has one, you must enter the code.
Menu functions Settings(Menu 9)85•Authorize device/Unauthorize device: determine if the phone asks you to permit connection when other devices try to connect to your phone.•Delete: delete the selected device or all devices.Sending data via Bluetooth1. Activate the Bluetooth feature.2. Select the application in which the item you want to send is stored. 3. Scroll to the item you want and press <Options>.4. Select Send via → Bluetooth.The phone searches for devices within range and displays a list of available devices.5. Select a device.6. If necessary, enter the Bluetooth PIN code needed for pairing and press <OK>.Receiving data via BluetoothTo receive data via Bluetooth, your phone’s Bluetooth feature must be active.If an unauthorised Bluetooth device sends data to your phone, the phone displays a confirmation message. To receive data, press <Yes>.Security(Menu 9.7)Use this menu to protect the phone against unauthorised use by managing the several access codes of your phone and SIM card.PIN check(Menu 9.7.1)The 4- to 8-digit PIN (Personal Identification Number) protects your SIM card against unauthorised use. When this feature is enabled, the phone requires your PIN each time it is switched on.Change PIN(Menu 9.7.2) Use this menu to change your PIN code. The PIN check feature must be enabled to use this feature.If you enter an incorrect PIN/PIN2 three times in succession, the SIM card is blocked. To unblock it, you need to enter your PUK/PUK2 (Personal Unblocking Key). The codes are supplied by your network operator.
86Menu functionsPhone lock(Menu 9.7.3) The Phone lock feature locks the phone from unauthorised use. When this feature is enabled, you must enter a 4- to 8-digit phone password each time the phone is switched on.The password is preset to 00000000. To change the password, use the Change password menu.Change password(Menu 9.7.4)Use this menu to change your phone password.Privacy(Menu 9.7.5)Use this menu to lock your media contents, including messages, media files, and document files. 1. Press [ ] to check the items to lock. 2. Press <Save> to lock the marked items.3. Enter the phone password and press <OK>.To access a locked item, you need to enter the phone password.SIM lock(Menu 9.7.6)The SIM lock feature allows your phone to work only with the current SIM by assigning a SIM lock code. You must enter the SIM lock code to use a different SIM card.FDN mode(Menu 9.7.7) If supported by your SIM card, Fixed Dialling Number (FDN) mode restricts your outgoing calls to a limited set of phone numbers. When this feature is enabled, you can make calls only to phone numbers stored on the SIM card.Change PIN2(Menu 9.7.8)If supported by your SIM card, the Change PIN2 feature changes your current PIN2. Memory status(Menu 9.8) Use this menu to check the amount of memory being used for storing data in Shared memory, Messages, File manager, Calendar, Phonebook, and JAVA world.
87Reset settings(Menu 9.9) Use this menu to reset the phone settings, display settings, and sound settings individually.1. Press [ ] to check the setting categories to be reset. 2. Press <Reset> to reset the marked items and then <Yes>.3. Enter the phone password and press <OK>.VOD settings (Menu 9.10)Use this menu to select a connection profile to be used for accessing a video streaming sever. For each profile, you can change the following options:•Profile name: assign a name to the profile.•APN: enter the access point name of the GPRS network gateway.•Login ID: enter the user ID.•Password: enter the password.Solve problemsHelp and personal needsTo save the time and expense of an unnecessary service call, perform the simple checks in this section before contacting a service professional.When you switch on your phone, the following messages may appear:“Insert SIM”• Be sure that the SIM card is correctly installed.“Phone lock”• The automatic locking function has been enabled. You must enter the phone’s password before you can use the phone.“Enter PIN”• You are using your phone for the first time. You must enter the PIN supplied with the SIM card.• The PIN check feature is enabled. Every time the phone is switched on, the PIN has to be entered. To disable this feature, use the PIN check menu.The password is preset to 00000000. You can change this password p. 86
88Solve problems“Enter PUK”• The PIN code has been entered incorrectly three times in succession, and the phone is now blocked. Enter the PUK supplied by your service provider.“No Service,” “Network Failure,” or “Not Done” displays• The network connection has been lost. You may be in a weak signal area. Move and try again.• You are trying to access an option for which you have no subscription with your service provider. Contact the service provider for further details.You have entered a number but it was not dialled• Be sure that you have pressed [ ].• Be sure that you have accessed the right cellular network.• Be sure that you have not set an outgoing call barring option.Your correspondent cannot reach you• Be sure that your phone is switched on. ([ ] pressed for more than one second.)• Be sure that you are accessing the correct cellular network.• Be sure that you have not set an incoming call barring option.Your correspondent cannot hear you speaking• Be sure that you have switched off the microphone.• Be sure that you are holding the phone close enough to your mouth. The microphone is located at the bottom of the phone.The phone starts beeping and “Battery low” flashes on the display• Your battery is insufficiently charged. Recharge the battery.The audio quality of the call is poor• Check the signal strength indicator on the display ( ). The number of bars indicates the signal strength from strong ( ) to weak ( ).
89• Try moving the phone slightly or moving closer to a window if you are in a building.No number is dialled when you re-call a Contacts entry• Use the Contact Search feature to ensure the number has been stored correctly.• Re-store the number, if necessary.The battery doesn’t charge properly or the phone sometimes turns itself off• Wipe the charging contacts both on the phone and on the battery with a clean soft cloth.If the above guidelines do not help you to solve the problem, take note of:• The model and serial numbers of your phone•Your warranty details• A clear description of the problemThen contact your local dealer or Samsung after-sales service.Health and safety information
90Health and safety informationExposure to Radio Frequency (RF) SignalsCertification Information (SAR)Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. government. These FCC exposure limits are derived from the recommendations of two expert organizations, the National Counsel on Radiation Protection and Measurement (NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases, the recommendations were developed by scientific and engineering experts drawn from industry, government, and academia after extensive reviews of the scientific literature related to the biological effects of RF energy.The exposure limit set by the FCC for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of the rate of absorption of RF energy by the human body expressed in units of watts per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates a substantial margin of safety to give additional protection to the public and to account for any variations in measurements.SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.NorthAmerica_Cingular_T-mobile.fm Page 9 Monday, September 26, 2005 2:42 AM
Health and safety information 91Before a new model phone is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC. Tests for each model phone are performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC. Body-worn operations are restricted to Samsung-supplied, approved, or non- Samsung designated accessories that have no metal and must provide at least 1.5 cm separation between the device, including its antenna (whether extended or retracted) and the user's body. Non-compliance with the above restrictions may result in violation of FCC RF exposure guidelines.The FCC has granted an Equipment Authorization for this mobile phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. The maximum SAR values for this model phone as reported to the FCC are: 1900• Head: 0.303 W/Kg.• Body-worn: 0.517 W/Kg.SAR information on this and other model phones can be viewed on-line at www.fcc.gov/oet/fccid. This site uses the phone FCC ID number, A3LSGHD600E. Sometimes it may be necessary to remove the battery pack to find the number. Once you have the FCC ID number for a particular phone, follow the instructions on the website and it should provide values for typical or maximum SAR for a particular phone. Additional product specific SAR information can also be obtained at www.fcc.gov/cgb/sar.사본 - NorthAmerica_Cingular_T-mobile.fm Page 10 Monday, September 26, 2005 6:47 AM
92Health and safety informationConsumer Information on Wireless PhonesThe U.S. Food and Drug Administration (FDA) has published a series of Questions and Answers for consumers relating to radio frequency (RF) exposure from wireless phones. The FDA publication includes the following information:What kinds of phones are the subject of this update?The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called “cell,” “mobile,” or “PCS” phones. These types of wireless phones can expose the user to measurable radio frequency energy (RF) because of the short distance between the phone and the user's head. These RF exposures are limited by Federal Communications Commission safety guidelines that were developed with the advice of FDA and other federal health and safety agencies. When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a person's RF exposure decreases rapidly with increasing distance from the source. The so-called “cordless phones,” which have a base unit connected to the telephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures well within the FCC's compliance limits.Do wireless phones pose a health hazard?The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radio frequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.NorthAmerica_Cingular_T-mobile.fm Page 11 Monday, September 26, 2005 2:42 AM
Health and safety information 93What is FDA's role concerning the safety of wireless phones?Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radio frequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:• “Support needed research into possible biological effects of RF of the type emitted by wireless phones;• “Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and• “Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health.FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:• “National Institute for Occupational Safety and Health• “Environmental Protection Agency• “Federal Communications Commission• “Occupational Safety and Health Administration• “National Telecommunications and Information AdministrationThe National Institutes of Health participates in some interagency working group activities, as well.FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF NorthAmerica_Cingular_T-mobile.fm Page 12 Monday, September 26, 2005 2:42 AM
94Health and safety informationexposure. FCC relies on FDA and other health agencies for safety questions about wireless phones.FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the primary subject of the safety questions discussed in this document.What are the results of the research done already?The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of radio frequency energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to be pre-disposed to develop cancer in absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we don't know with certainty what the results of such studies mean for human health.Three large epidemiology studies have been published since December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phones RF exposures. However, none of the studies can answer questions about long-term exposures, since the average period of phone use in these studies was around three years.NorthAmerica_Cingular_T-mobile.fm Page 13 Monday, September 26, 2005 2:42 AM
Health and safety information 95What research is needed to decide whether RF exposure from wireless phones poses a health risk?A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but ten or more years' follow-up may be needed to provide answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop - if they do - may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this measurement, such as the angle at which the phone is held, or which model of phone is used.What is FDA doing to find out more about the possible health effects of wireless phone RF?FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radio frequency energy (RF).FDA has been a leading participant in the World Health Organization international Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues.FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts NorthAmerica_Cingular_T-mobile.fm Page 14 Monday, September 26, 2005 2:42 AM
96Health and safety informationto independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world.What steps can I take to reduce my exposure to radio frequency energy from my wireless phone?If there is a risk from these products - and at this point we do not know that there is - it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radio frequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure.• “If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna.Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use.What about children using wireless phones?The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radio frequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure.Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For NorthAmerica_Cingular_T-mobile.fm Page 15 Monday, September 26, 2005 2:42 AM
Health and safety information 97example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists. Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort. These systems reduce the absorption of RF energy in the head because the phone, which is the source of the RF emissions, will not be placed against the head. On the other hand, if the phone is mounted against the waist or other part of the body during use, then that part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements regardless of whether they are used against the head or against the body. Either configuration should result in compliance with the safety limit.Do wireless phone accessories that claim to shield the head from RF radiation work?Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone. Studies have shown that these products generally do not work as advertised. Unlike “hand-free” kits, these so-called “shields” may interfere with proper operation of the phone. The phone may be forced to boost its power to compensate, leading to an increase in RF absorption. In February 2002, the Federal trade Commission (FTC) charged two companies that sold devices that claimed to protect wireless phone users from radiation with making false and unsubstantiated NorthAmerica_Cingular_T-mobile.fm Page 16 Monday, September 26, 2005 2:42 AM
98Health and safety informationclaims. According to FTC, these defendants lacked a reasonable basis to substantiate their claim.What about wireless phone interference with medical equipment?Radio frequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. FDA has tested wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a compatible phone and a compatible hearing aid at the same time. This standard was approved by the IEEE in 2000.FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the problem.Additional information on the safety of RF exposures from various sources can be obtained from the following organizations:• FCC RF Safety Program:http://www.fcc.gov/oet/rfsafety/• Environmental Protection Agency (EPA):http://www.epa.gov/radiation/• Occupational Safety and Health Administration's (OSHA): http://www.osha.gov/SLTC/radiofrequencyradiation/index.htmlNorthAmerica_Cingular_T-mobile.fm Page 17 Monday, September 26, 2005 2:42 AM
Health and safety information 99• National institute for Occupational Safety and Health (NIOSH):http://www.cdc.gov/niosh/emfpg.html • World health Organization (WHO):http://www.who.int/peh-emf/• International Commission on Non-Ionizing Radiation Protection:http://www.icnirp.de• National Radiation Protection Board (UK):http://www.nrpb.org.uk• Updated 4/3/2002: US food and Drug Administrationhttp://www.fda.gov/cellphonesRoad SafetyYour wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold.When driving a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips:1. Get to know your wireless phone and its features, such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.2. When available, use a hands-free device. If possible, add an additional layer of convenience and safety to your wireless phone with one of the many hands free accessories available today.NorthAmerica_Cingular_T-mobile.fm Page 18 Monday, September 26, 2005 2:42 AM
101Health and safety information3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voice mail answer it for you.4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice and even heavy traffic can be hazardous.5. Do not take notes or look up phone numbers while driving. Jotting down a “to do” list or flipping through your address book takes attention away from your primary responsibility, driving safely.6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.7. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road.8. Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone!9. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.10.Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency number.NorthAmerica_Cingular_T-mobile.fm Page 19 Monday, September 26, 2005 2:42 AM
Health and safety information 102“The wireless industry reminds you to use your phone safely when driving.”For more information, please call 1-888-901-SAFE, or visit our web-site www.wow-com.comProvided by the Cellular Telecommunications & Internet AssociationOperating EnvironmentRemember to follow any special regulations in force in any area and always switch your phone off whenever it is forbidden to use it, or when it may cause interference or danger. When connecting the phone or any accessory to another device, read its user's guide for detailed safety instructions. Do not connect incompatible products.As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder).Using Your Phone Near Other Electronic DevicesMost modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Consult the manufacturer to discuss alternatives.PacemakersPacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker.These recommendations are consistent with the independent research and recommendations of Wireless Technology Research.Persons with pacemakers:• should always keep the phone more than 15 cm (6 inches) from their pacemaker when the phone is switched on.• should not carry the phone in a breast pocket.NorthAmerica_Cingular_T-mobile.fm Page 20 Monday, September 26, 2005 2:42 AM
103Health and safety information• should use the ear opposite the pacemaker to minimize potential interference.If you have any reason to suspect that interference is taking place, switch your phone off immediately.Hearing AidsSome digital wireless phones may interfere with some hearing aids. In the event of such interference, you may wish to consult your hearing aid manufacturer to discuss alternatives.Other Medical DevicesIf you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Switch your phone off in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.Posted FacilitiesSwitch your phone off in any facility where posted notices require you to do so.Potentially Explosive EnvironmentsSwitch your phone off when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.Users are advised to switch the phone off while at a refueling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution NorthAmerica_Cingular_T-mobile.fm Page 21 Monday, September 26, 2005 2:42 AM
104areas), chemical plants or where blasting operations are in progress.Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine.Emergency CallsThis phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user programmed functions, which cannot guarantee connection in all conditions. Therefore, you should never rely solely on any wireless phone for essential communications (medical emergencies, for example).Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers.To make an emergency call:1. If the phone is not on, switch it on.2. Key in the emergency number for your present location (for example, 911 or other official emergency number). Emergency numbers vary by location.3. Press .If certain features are in use (call barring, for example), you may first need to deactivate those features before you can make an emergency call. Consult this document and your local cellular service provider.When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your phone may be the only means of communication at the scene of an accident; do not cut off the call until given permission to do so.NorthAmerica_Cingular_T-mobile.fm Page 22 Monday, September 26, 2005 2:42 AM
105Health and safety informationRestricting Children's access to your PhoneYour phone is not a toy. Children should not be allowed to play with it because they could hurt themselves and others, damage the phone or make calls that increase your phone bill.FCC Notice and CautionsFCC NoticeThe phone may cause TV or radio interference if used in close proximity to receiving equipment. The FCC can require you to stop using the phone if such interference cannot be eliminated.Vehicles using liquefied petroleum gas (such as propane or butane) must comply with the National Fire Protection Standard (NFPA-58). For a copy of this standard, contact the National Fire Protection Association, One Battery march Park, Quincy, MA 02269, Attn: Publication Sales Division.CautionsChanges or modifications made in the radio phone, not expressly approved by Samsung, will void the user’s authority to operate the equipment.Only use approved batteries, antennas and chargers. The use of any unauthorized accessories may be dangerous and void the phone warranty if said accessories cause damage or a defect to the phone.Although your phone is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting, bending or sitting on it.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.NorthAmerica_Cingular_T-mobile.fm Page 23 Monday, September 26, 2005 2:42 AM
106Other Important Safety Information• Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device.• Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.• Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories.• For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If wireless equipment is improperly installed and the air bag inflates, serious injury could result.• Switch your phone off before boarding an aircraft. The use of wireless phone in aircraft is illegal and may be dangerous to the aircraft's operation.• Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both.Product PerformanceGetting the Most Out of Your Signal ReceptionThe quality of each call you make or receive depends on the signal strength in your area. Your phone informs you of the current signal strength by displaying a number of bars next to the signal strength icon. The more bars displayed, the stronger the signal.If you're inside a building, being near a window may give you better reception.Understanding the Power Save FeatureIf your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated. If your phone is active, it periodically rechecks service availability or you can check it yourself by pressing any key.Anytime the Power Save feature is activated, a message displays on the screen. When a signal is found, your phone returns to standby mode.NorthAmerica_Cingular_T-mobile.fm Page 24 Monday, September 26, 2005 2:42 AM
107Health and safety informationUnderstanding How Your Phone OperatesYour phone is basically a radio transmitter and receiver. When it's turned on, it receives and transmits radio frequency (RF) signals. When you use your phone, the system handling your call controls the power level. This power can range from 0.006 watts to 0.2 watts in digital mode.Maintaining Your Phone's Peak PerformanceFor the best care of your phone, only authorized personnel should service your phone and accessories. Faulty service may void the warranty.There are several simple guidelines to operating your phone properly and maintaining safe, satisfactory service.• Hold the phone with the antenna raised, fully-extended and over your shoulder.• Try not to hold, bend or twist the phone's antenna.• Don't use the phone if the antenna is damaged.• Speak directly into the phone's receiver.• Avoid exposing your phone and accessories to rain or liquid spills. If your phone does get wet, immediately turn the power off and remove the battery. If it is inoperable, call Customer Care for service.Availability of Various Features/Ring TonesMany services and features are network dependent and may require additional subscription and/or usage charges. Not all features are available for purchase or use in all areas. Downloadable Ring Tones may be available at an additional cost. Other conditions and restrictions may apply. See your service provider for additional information.Battery Standby and Talk TimeStandby and talk times will vary depending on phone usage patterns and conditions. Battery power consumption depends on factors such as network configuration, signal strength, operating temperature, features selected, frequency of calls, and voice, data, and other application usage patterns. NorthAmerica_Cingular_T-mobile.fm Page 25 Monday, September 26, 2005 2:42 AM
Health and safety information 108Battery Precautions• Never use any charger or battery that is damaged in any way.• Use the battery only for its intended purpose.• If you use the phone near the network's base station, it uses less power; talk and standby time are greatly affected by the signal strength on the cellular network and the parameters set by the network operator.• Battery charging time depends on the remaining battery charge and the type of battery and charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery.• If left unused, a fully charged battery will discharge itself over time.• Use only Samsung-approved batteries and recharge your battery only with Samsung-approved chargers. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its life.• Extreme temperatures will affect the charging capacity of your battery: it may require cooling or warming first.• Do not leave the battery in hot or cold places, such as in a car in summer or winter conditions, as you will reduce the capacity and lifetime of the battery. Always try to keep the battery at room temperature. A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Li-ion batteries are particularly affected by temperatures below 0 °C (32 °F).• Do not short-circuit the battery. Accidental short- circuiting can occur when a metallic object (coin, clip or pen) causes a direct connection between the + and - terminals of the battery (metal strips on the battery), for example when you carry a spare battery in a pocket or bag. Short-circuiting the terminals may damage the battery or the object causing the short-circuiting.NorthAmerica_Cingular_T-mobile.fm Page 26 Monday, September 26, 2005 2:42 AM
109Health and safety information• Dispose of used batteries in accordance with local regulations. In some areas, the disposal of batteries in household or business trash may be prohibited. For safe disposal options for Li-Ion batteries, contact your nearest Samsung authorized service center. Always recycle. Do not dispose of batteries in a fire.Care and MaintenanceYour phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfill any warranty obligations and allow you to enjoy this product for many years.• Keep the phone and all its parts and accessories out of the reach of small children.• Keep the phone dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits.• Do not use the phone with a wet hand. Doing so may cause an electric shock to you or damage to the phone.• Do not use or store the phone in dusty, dirty areas, as its moving parts may be damaged.• Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside the phone, which may damage the phone's electronic circuit boards.• Do not drop, knock or shake the phone. Rough handling can break internal circuit boards.• Do not use harsh chemicals, cleaning solvents or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water solution.NorthAmerica_Cingular_T-mobile.fm Page 27 Monday, September 26, 2005 2:42 AM
Health and safety information 110• Do not paint the phone. Paint can clog the device's moving parts and prevent proper operation.• Do not put the phone in or on heating devices, such as a microwave oven, a stove or a radiator. The phone may explode when overheated.• When the phone or battery gets wet, the label indicating water damage inside the phone changes color. In this case, phone repairs are no longer guaranteed by the manufacturer's warranty, even if the warranty for your phone has not expired. • If your phone has a flash or light, do not use it too close to the eyes of people or animals. This may cause damage to their eyes.• Use only the supplied or an approved replacement antenna. Unauthorized antennas or modified accessories may damage the phone and violate regulations governing radio devices.• If the phone, battery, charger or any accessory is not working properly, take it to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service.NorthAmerica_Cingular_T-mobile.fm Page 28 Monday, September 26, 2005 2:42 AM
111 IndexAABC mode, text input • 24Alarm • 42Answeringcall • 27second call • 28Anykey answer • 78Auto redial • 78BBackground image • 78Backlight time, set • 79Band selection • 82Barring, calls • 81Batterycharging • 7low indicator • 8precautions • 90Bluetoothreceiving, data • 85sending, data • 85settings • 83Broadcast messages • 60Browser, web • 44CCalculator • 43Call costs • 32Call recordsdialled • 31missed • 31received • 31Call time • 31Caller group • 34Caller ID • 82Calls answering • 27barring • 81diverting • 81holding • 28redialling • 26rejecting • 27waiting • 82Cameraphotos • 70videos • 73CB (Cell Broadcast) messages • 60Characters, enter • 24Connection tone • 80Converter • 43Creating messagese-mail • 49MMS • 48SMS • 48Creating organiseranniversaries • 68events • 67miscellaneous • 67tasks • 68DDeletingcall records • 30contacts • 36e-mail • 54, 55events • 69MMS • 51, 52, 55SMS • 51, 52, 55Dialled calls • 31Displaybrightness • 79icons • 10language • 77layout • 10settings • 78Diverting, calls • 81Document files • 65DTMF tones, send • 29EE-mailscreating/sending • 49setting • 58viewing • 53Emergency calls • 93FFDN (Fixed Dialling Number) mode • 86File manager • 61File viewer • 65GGames • 40, 41Greeting message • 77HHealth and safety • 89Holding, call • 28IIcons, description • 10Image editor • 40Images, downloaded • 61
112IIndexdex Inbox, messagese-mail • 53MMS/SMS • 50Input mode, change • 24International calls • 26Internet • 44KKeypad tonesselecting • 80sending/muting • 29volume • 80LLanguage, select • 77Last number, redial • 26Lockingmedia contents • 86phone • 86SIM card • 86Low battery indicator • 8MMemory card • 21Memory statuscamera • 61contacts • 36file manager • 66messages • 61phone • 86Menu style • 78Message tone • 80Messagescell broadcast • 60configuration • 52e-mail • 49greeting • 77MMS • 48push • 51SMS • 48Minute minder • 80Missed calls • 31MMS messagescreating/sending • 48deleting • 51setting • 56viewing • 50MP3 player • 37Music, downloaded • 63NName card • 35Namesentering • 24searching • 32Network band, select • 82Network selection • 82Network services • 80OOrganiser • 67Outbox, messages • 52PPasswordcall barring • 81phone • 86Phonecare and maintenance • 94display • 10icons • 10locking • 86password • 86resetting • 87switching on/off • 8unpacking • 6Phonebookadding • 33copying • 33deleting • 36editing • 32managing • 36options • 32speed-dialling • 35Photosdeleting • 62editing • 40options • 61taking • 70viewing • 61PIN, change • 85PIN2, change • 86Power on/off tone • 80Privacy • 86Problems, solve • 87Push messages • 51, 60RReceived calls • 31Received messagese-mail • 53MMS/SMS • 50Recordingvideos • 73voice memos • 39Rediallingautomatically • 78manually • 26Resetting phone • 87Ringerincoming calls • 79messages • 80Road safety • 91Roaming • 82
113 IndexSSafetyinformation • 89precaution • 1Security, calls • 85Sentbox, messages • 53SIM cardinserting • 7locking • 86Skin • 79Slide settings • 77SMS messagescreating/sending • 48deleting • 51setting • 55viewing • 51Sound settings • 79Sounds, downloaded • 64Speed-dial • 35Stopwatch • 44Switching on/offmicrophone • 29phone • 8TTemplates, message • 54Text, enter • 24Timer • 43TV out • 79VVideosplaying • 63recording • 73Voice memosplaying • 40recording • 39Voicemail server • 82WWaiting call • 82Wallpaper • 78Web browseraccess • 45bookmarks • 46World time • 42
Declaration of Conformity (R&TTE) For the following product:GSM850/GSM900/GSM1800/GSM1900Portable Cellular Telephone (Product description)SGH-D600E(Model name)Manufactured at:Samsung Electronics Co., Ltd, 94-1 Imsoo-Dong, Gumi City, Kyung Buk, Korea, 730-350 (factory name, address*)to which this declaration relates, is in conformity with the following standards and/or other normative documents. We hereby declare the [all essential radio test suites have been carried out and that] the above named product is in conformity to all the essential requirements of Directive 1999/5/EC.The conformity assessment procedure referred to in Article 10 and detailed in Annex[IV] of Directive 1999/5/EC has been followed with the involvement of the following Notified Body(ies):BABT, Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD, UK Identification mark: 0168The technical documentation kept at:Samsung Electonics Euro QA Lab.which will be made available upon request.(Representative in the EU)Samsung Electronics Euro QA Lab.Blackbushe Business Park, Saxony Way, Yateley, Hampshire, GU46 6GG, UK2005. 08. 04 (place and date of issue) (name and signature of authorised person)* It is not the address of Samsung Service Centre. For the address or the phone number of Samsung Service Centre, see the warranty card or contact the retailer where you purchased your phone.

Navigation menu