Samsung Electronics Co SGHE250 Single-Band PCS GSM/ EDGE Phone with Bluetooth User Manual SGH E640 lists

Samsung Electronics Co Ltd Single-Band PCS GSM/ EDGE Phone with Bluetooth SGH E640 lists

Users Manual

World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-XXXXXA
English (EU). 08/2006. Rev. 1.0
* Depending on the software installed or your service provider or country, some of the descriptions in
this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear different from the illustrations
in this guide.
SGH-E250
User’s Guide
Draft_1st
2006. 08. 16
Version: E250XAFH2
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Drive safely at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using
them in an aircraft is both illegal and dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules
in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Important safety precautions
1
Be aware of special regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency call
Key in the emergency number for your present
location, then press .
Keep your phone away from small children
Keep the phone and all its parts, including
accessories, out of the reach of small children.
Accessories and batteries
Use only Samsung-approved batteries and
accessories, such as headsets and PC data cables.
Use of any unauthorised accessories could damage
you or your phone and may be dangerous.
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see "Health
and safety information" on page 117.
• The phone could explode if the battery is replaced
with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
At very high volumes, prolonged listening
to a headset can damage your hearing.
2
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To
quickly learn the basics for your phone, please refer
to “Get started” and “Step outside the phone.
In this guide, the following instruction icons
appear:
Indicates that you need to pay careful
attention to the subsequent information
regarding safety or phone features.
Indicates that you can get more information
on the referenced page.
Indicates that you need to press the
Navigation keys to scroll to the specified
option and then select it.
[ ]
Indicates a key on the phone. For example,
[]
< >
Indicates a soft key, whose function is
displayed on the phone screen. For
example, <
Menu
>
Camera and camcorder
Use the camera module on your
phone to take a photo or record
a video.
Special
features of your phone
Music player
Play music files using your
phone as a music player.
•FM radio
Listen to your favourite radio
stations anytime, anywhere.
Special features of your phone
3
Digital data printing
Print images, messages, and
other personal data directly
from your phone.
•Bluetooth
Transfer media files and
personal data and connect to
other devices using free,
wireless Bluetooth technology.
Offline mode
Switch your phone to use its
none-wireless functions in an
airplane.
•Name card
Create name cards with your
number and profile. Whenever
introducing yourself to others,
use this convenient electronic
name card.
Multimedia Message Service
(MMS)
Send and receive MMS
messages with a combination of
text, image, video, and audio.
•E-mail
Send and receive e-mails with
image, video, and audio
attachments.
•Java
Enjoy Java
-based
embedded games and
download new games.
Voice recorder
Record memos or sounds.
4
Contents
Unpack 6
Make sure you have each item
Your phone 6
Keys, features, and locations
Get started 7
First steps to operating your phone
Install and charge the phone ........................... 7
Power on or off.............................................. 9
Keys and display........................................... 10
Access menu functions .................................. 13
Customise your phone................................... 14
Make/Answer calls ........................................ 16
Step outside the phone 17
Begin with your camera, the music player, the web
browser, and other special features
Use the camera ............................................ 17
Play music ................................................... 18
Listen to the FM radio ................................... 19
Browse the web ........................................... 20
Use Phonebook ............................................ 21
Send messages ............................................ 22
View messages ............................................ 24
Use Bluetooth .............................................. 25
Use a memory card ...................................... 27
Enter text 29
ABC, T9, Number, and Symbol modes
Call functions 32
Advanced calling features
Menu functions 37
All menu options listed
Solve problems 115
Help and personal needs
Health and safety information 117
Index 126
5
Overview of menu functions
To access Menu mode, press <
Menu
> in Idle mode.
1 Call log
p.37
1 Recent contacts
2 Missed calls
3 Dialled calls
4 Received calls
5 Delete all
6 Call time
7 Call costs
1
p.37
p.
38
p.38
p.38
p.38
p.38
p.39
2 Phonebook
p.39
1 Contact list
2 FDN contacts
*
3 Create contact
4 Group
5 Speed dial
6 My namecard
7 Own number
8 Management
9 Service number
*
p.40
p.41
p.41
p.43
p.43
p.44
p.45
p.45
p.45
3 Applications
p.46
1 Music Player
2 Voice recorder
3 Image editor
4 Bluetooth
5 Java world
6 FM radio
7 SIM-AT
1
p.
46
p.49
p.50
p.51
p.54
p.55
p.57
4 Browser
p.57
1 Home
2 Bookmarks
3 Enter URL
4 Clear cache
5 Profile settings
6 Current profile
p.57
p.59
p.59
p.59
p.59
p.61
5 Messages
p.61
1 Create new
message
2 My messages
3 Templates
4 Delete all
5 Settings
p.61
p.
p.66
p.71
p.72
p.73
5 Messages
6 SOS message
7 Broadcast
messages
8 Memory status
p.79
p.80
p.80
6 My files
p.81
1 Images
2 Videos
3 Music
4 Sounds
5 Other files
6 Memory card
2
7 Memory status
p.81
p.82
p.83
p.83
p.84
p.85
p.85
7 Planner
p.85
1 Alarm
2 Calendar
3 Memo
4 World clock
5 Calculator
6 Converter
7 Timer
8 Stopwatch
p.86
p.87
p.90
p.91
p.92
p.92
p.93
p.93
8 Camera
p.94
1 Take photo
2 Record video
3 Go to My photos
4 Go to My video
clips
p.94
p.98
p.100
p.101
9 Settings
p.101
1 Time and date
2 Phone settings
3 Display settings
4 Sound settings
5 Light settings
6 Network services
7 Security
8 Memory status
9 Reset settings
10 Key management
p.101
p.102
p.105
p.107
p.
108
p.109
p.111
p.113
p.114
p.114
1. Shows only if supported
by your SIM card.
2. Available only if a memory
card is inserted.
6
Unpack
Make sure you have each item
• Phone
•Travel Adapter
•Battery
•Users Guide
You can obtain various
accessories from your local
Samsung dealer.
The items supplied with your
phone and the accessories
available at your Samsung
dealer may vary, depending on
your country or service
provider.
Your phone
Keys, features, and locations
Earpiece
Display
Volume keys
Left soft key
Dial key
Memory card
slot
Alphanumeric
keys
Delete key
Microphone
Special
function keys
Power on/off/
Menu exit key
Right soft key
Navigation
(Up/Down/Left/
Right) keys
Web access/
Confirm key
Camera
lens
Headset/
Adapter
jack
7
Get started
First steps to operating your phone
SIM card information
When you subscribe to a cellular network, you
receive a plug-in SIM (Subscriber Identity
Module) card loaded with your subscription
details, such as your PIN, and available optional
services.
Install and charge the phone
Remove the battery
cover
.
If the phone is
already on, first turn
it off by pressing and
holding [ ].
Insert the SIM card.
Install the battery.
Reattach the cover.
Get started
8
Low battery indicator
When the battery is low:
a warning tone sounds,
the battery low message displays, and
the empty battery icon blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
Plug the travel
adapter into the
phone.
Plug the adapter into a standard AC wall
outlet.
When the phone is completely charged (the
battery icon becomes still), unplug the
adapter from the wall outlet.
Remove the adapter
from the phone.
Get started
9
Power on or off
Keypad lock
When you close the phone, it locks the exposed
keys to prevent any unwanted phone
operations, from accidentally pressing any of
the keys.
To unlock the keypad, press <
Unlock
> and
then <
OK
>.
Offline mode
You can switch the phone to Offline mode, in
which the phone functions requiring network
connection are deactivated. This mode is helpful
when you want to use your phone in a place
where you are not allowed to use mobile
devices, such as in an airplane and at a
hospital.
To switch to Offline mode, press <
Menu
> and
select
Settings
Phone settings
Offline
mode
On
.
In Offline mode, you can use non-wireless
functions, such as games, calendar, camera,
and music player.
Switch on
Do not turn on
the phone when
mobile phone
use is prohibited.
1. Open the phone.
2. Press and hold [ ].
3. If necessary, enter the
PIN and press <
OK
>.
Switch off
1. Open the phone.
2. Press and hold [ ].
Get started
10
Keys and display
Keys
Perform the function indicated on
the bottom line of the display.
In Idle mode, access the following
menus directly:
Up: My Menu mode
•Down:
Camera
Left/Right: Your favourite menus
p. 102
In Menu mode, scroll through menu
options.
In Idle mode, launch the web
browser.
In Menu mode, select the
highlighted menu option or confirm
input.
Send or answer a call.
In Idle mode, retrieve numbers
recently dialled, missed, or
received.
Delete characters from the display
or items in an application.
Press and hold to switch the phone
on or off.
End a call.
In Menu mode, cancel input and
return the phone to Idle mode.
Enter numbers, letters, and some
special characters.
In Idle mode, press and hold [
0
] to
enter an international call prefix.
Get started
11
Display
Enter special characters.
In Idle mode, press and hold [
]
to
activate or deactivate Silent mode.
Press and hold [
]
to enter a pause
between numbers.
Adjust the phone volume.
In Idle mode, with the phone open,
adjust the key tone volume. With
the phone closed, press and hold to
turn on the external display.
Layout
Icons
1
Received signal strength
Call in progress
Out of your service area;
you cannot make or
receive calls
Alarm set
p. 86
Text and graphics
display messages,
instructions, and
information you enter.
Soft key function
indicators
show the current
functions assigned
to the soft keys.
Icons
display various icons.
Menu Contacts
Get started
12
New text message
New voicemail
New multimedia message
New e-mail
Call diverting feature active
p. 109
Bluetooth active
p. 51
Bluetooth headset or
hands-free car kit
connected
Synchronised with a PC
Connected to PC via USB
GPRS network
Transfering data in GPRS
network
EDGE network
Transfering data in EDGE
network
Home Zone, if registered
for the appropriate service
Office Zone, if registered
for the appropriate service
Roaming network
Browsing Internet
Memory card inserted
Silent mode (Vibration)
Silent mode (Mute)
Ringer type
p. 107
• None: Melody
•: Vibration
: Melody and vibration
•: Vibration then melody
: Melody then vibration
Battery power level
1. Depending on your country or service provider, the
icons shown on the display may vary.
E250-1.fm Page 12 Wednesday, August 16, 2006 11:01 PM
Get started
13
Access menu functions
Use the
soft keys
The roles of the soft keys vary
depending on the function you
are using. The bottom line of the
display indicates their current
role.
Press the left soft
key to select the
highlighted
option.
Press the right soft
key to return to the
previous menu
level.
Select
Back
Select an
option
1. Press a desired soft key.
2. Press the Navigation keys to
move to the next or previous
option.
3. Press <
Select
> or [ ] to
confirm the function displayed
or option highlighted.
4. To exit, choose either of the
following methods:
•Press <
Back
> to move up
one level.
Press [ ] to return to Idle
mode.
Use
shortcuts
Press the number key
corresponding to the option you
want.
Get started
14
Customise your phone
1. In Idle mode, press
<
Menu
> and select
Settings
Phone
settings
Language
.
2. Select a language.
1. In Idle mode, press
<
Menu
> and select
Settings
Sound
settings
Incoming call
Ring tone
.
2. Press [Left] or [Right] to
access a ringtone category.
3. Press [Up] or [Down] to
select a ringtone.
4. Press <
Save
>.
Display
language
Call ringer
melody
You can set wallpaper for the
idle screen on each display.
1. In Idle mode, press <
Menu
>
and select
Settings
Display settings
Wallpaper
Wallpaper
.
2. Select an image category.
3. Select an image.
4. Press <
Save
>.
You can change the colour for
the display components, such
as title bars and highlight bars.
1. In Idle mode, press <
Menu
>
and select
Settings
Display settings
Skin
.
2. Select a colour pattern.
Idle mode
wallpaper
Menu mode
skin colour
Get started
15
You can set [Left] or [Right] to
function as shortcuts to access
your favourite menus.
1. In Idle mode, press
<
Menu
> and select
Settings
Phone
settings
Shortcuts
.
2. Select a key.
3. Select a menu to be
assigned to the key.
You can set up a menu for your
own favourite menu items.
To set a My menu item:
1. In Idle mode, press
<
Menu
> and select
Settings
Phone
settings
My menu
.
Menu
shortcuts
My Menu
mode
2. Select an item to be
changed.
3. Select the menu item you
want.
To access a My menu item:
1. In Idle mode, press [Up].
2. Scroll to an item.
3. Press [ ].
You can switch the phone to
Silent mode to avoid disturbing
other people.
Press and hold [ ] in Idle
mode.
Silent mode
Get started
16
Make/Answer calls
You can protect the phone
against unauthorised use with a
phone password. The phone will
require the password on
power-up.
1. In Idle mode, press <
Menu
>
and select
Settings
Security
Change
password
.
2. Enter the default password,
00000000
, and press <
OK
>.
3. Enter a new 4- to 8-digit
password and press <
OK
>.
4. Enter the new password again
and press <
OK
>.
5. Select
Phone lock
.
6. Select
Enable
.
7. Enter the password and press
<
OK
>.
Phone lock
1. Enter an area code and
phone number.
2. Press [ ].
3. To end the call, press [ ].
1. When the phone rings,
press [ ].
2. To end the call, press [ ].
Press [ / ].
Make a call
Answer a
call
Adjust the
volume
during a call
Step outside the phone
17
Step outside the phone
Begin with your camera, the music player, the web
browser, and other special features
Use the camera
1. In Idle mode, press [Down]
and select
Take photo
to
turn on the camera.
2. Aim the lens at the subject
and make any desired
adjustments.
3. Press [ ] to take a
photo. The photo is saved
automatically.
4. Press <
Back
> to take
another photo.
Take a
photo
1. In Idle mode, press
<
Menu
> and select
My
files
Images
My
photos
.
2. Select the photo you want.
1. In Idle mode, press [Down]
and select
Record video
.
2. Press [ ] to start
recording.
3. Press [ ] or < > to
stop recording. The video is
saved automatically.
4. Press < > to record
another video.
View a
photo
Record a
video
Step outside the phone
18
Play music
1. In Idle mode, press
<
Menu
> and select
My
files
Videos
My video
clips
.
2. Select the video clip you
want.
Use these methods:
Download from the wireless
web
p. 57
Download from a computer
using the optional Samsung
PC Studio
Samsung PC
Studio User’s Guide
Play a video
Copy music
files to the
phone
Receive via Bluetooth
p. 54
Copy to a memory card and
insert it into the phone
p. 27
1. In Idle mode, press
<
Menu
>
and select
Applications
Music
Player
.
2. Press <
Options
> and
select
Add music from
a
memory location.
3. Press [ ] to select the
files you want and press
<
Add
>.
Create a
play list
Step outside the phone
19
Listen to the FM radio
1. From the music player
screen, press [ ].
2. During playback, use the
following keys:
: pauses or resumes
playback.
Up: opens the current
play list.
Left: returns to the
previous file. Moves
backward in a file when
held down.
Right: skips to the next
file. Skips forward in a
file when held down.
•/: adjusts the volume.
3. Press [Down] to stop
playback.
Play music
files
1. Plug the connecter of the
supplied headset into the
jack on the right side of the
phone.
2. In Idle mode, press
<
Menu
>
and select
Applications
FM radio
.
3. Press [ ] to turn on the
radio.
4. Press [Left] or [Right] to
find available radio stations.
5. To turn off the radio,
disconnect the headset from
the phone.
Listen to the
radio
Step outside the phone
20
Browse the web
Using a built-in web browser, you can easily
access the wireless web to get a variety of
up-to-date services and information and to
download web content.
1. From the station list, press
<
Options
> and select
Add
.
2. Enter the title of the station
and the frequency of the
station and press [ ].
3. Select a location in which
you want to store the
station.
In Idle mode, press [ ] or
press <
Menu
> and select
Browser
Home
.
Store radio
stations
Launch the
web browser
To scroll through browser
items, press [Up] or
[Down].
To select an item, press
<> or [ ].
To return to the previous
page, press <
Back
> or [
C
].
To return to the homepage,
press and hold [
C
].
To access browser options,
select or press [ ].
To access other phone
menus, press [ ].
Navigate
the web
Step outside the phone
21
Use Phonebook
To the phone’s memory:
1. In Idle mode, enter a phone
number and press [ ].
2. Select
Phone
New
a
number type.
3. Specify contact information:
First name, Last name,
Mobile, Home, Office, Fax,
Other, Email, Graphic ID,
Ringtone, Group, and
Notes.
4. Press <
Options
> and
select
Save
, or press
<
Save
>
to save the
contact.
Add a
contact
To the SIM card:
1. In Idle mode, enter a phone
number and press [ ].
2. Select
SIM
New
.
3. Enter a name.
4. Press <
Options
> and
select
Save
, or press
<
Save
>
to save the
contact.
1. In Idle mode, press
<
Contacts
>.
2. Enter the first few letters of
the name you want.
3. Select a contact.
4. Scroll to a number and
press [ ] to dial, or
press
[ ] to edit contact
information.
Find a
contact
Step outside the phone
22
Send messages
1. In Idle mode, press
<
Menu
> and select
Phonebook
My
namecard
.
2. Specify your contact
information.
3. Press [ ] to save the
name card.
4. To send the name card,
press <
Options
> and
select
Send via
a
sending method.
Create and
send a
name card
1. In Idle mode, press
<
Menu
> and select
Messages
Create new
message
Text message
.
2. Enter the message text and
press [ ].
3. Enter destination numbers.
4. Press [ ] to send the
message.
1. In Idle mode, press <
Menu
>
and select
Messages
Create new message
Multimedia message
.
2. Select
Subject
.
3. Enter the message subject
and press [ ].
Send a text
message
(SMS)
Send a
multimedia
message
(MMS)
Step outside the phone
23
4. Select
Image or video
or
Music or Sound
.
Alternatively, select
Add
image
or
Add video
and
add an image or a video
clip.
5. Select
Add music
or
Add
sound
and add a music file
or a sound clip.
6. Select
Text
.
7. Enter the message text and
press [ ].
8. Press <
Options
> and
select
Send
.
9. Enter destination numbers
or addresses.
10.Press [ ] to send the
message.
1. In Idle mode, press
<
Menu
> and select
Messages
Create new
message
Multimedia
message
.
2. Select
Subject
.
3. Enter the message subject
and press [ ].
4. Select
Message
.
5. Enter the e-mail text and
press [ ].
6. Select
File attach
.
7. Add image, video, sound,
music files, or document
files.
8. Press <
Options
> and
select
Send
.
Send an
e-mail
Step outside the phone
24
View messages
9. Enter e-mail addresses.
10.Press [ ] to send the
e-mail.
When a notification appears:
1. Press <
View
>.
2. Select the message from
the Inbox.
From the Inbox:
1. In Idle mode, press
<
Menu
> and select
Messages
My
messages
Inbox
.
2. Select an SMS message
().
Send an
e-mail
(continued)
View a text
message
When a notification appears:
1. Press <
View
>.
2. Select the message from
the Inbox.
From the Inbox:
1. In Idle mode, press
<
Menu
> and select
Messages
My
messages
Inbox
.
2. Select an MMS message
().
1. In Idle mode, press
<
Menu
> and select
Messages
My
messages
Email Inbox
.
2. Select
Check new e-mail
.
View a
multimedia
message
View an
e-mail
Step outside the phone
25
Use Bluetooth
Your phone is equipped with Bluetooth
technology, enabling you to connect the phone
wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or
control the phone remotely.
1. In Idle mode, press
<
Menu
> and select
Messages
My
messages
Email Inbox
.
2. Select
Check new e-mail
.
3. Select an e-mail or a
header.
4. If you selected a header,
press <
Options
> and
select Retrieve to view the
body of the e-mail.
1. In Idle mode, press
<
Menu
> and select
Applications
Bluetooth
Activation
On
.
2. Select
My phone’s
visibility
On
to allow
other devices to find your
phone.
1. In Idle mode, press
<
Menu
>
and select
Applications
Bluetooth
My devices
Search
new device
.
2. Select a device.
Turn on
Bluetooth
Search for
and pair with
a Bluetooth
device
Step outside the phone
26
3. Enter a Bluetooth PIN or the
other device’s Bluetooth
PIN, if it has one, and press
<
OK
>.
When the owner of the
other device enters the
same code, the pairing is
complete.
1. Access an application,
Phonebook
,
My files
, or
Calendar
.
2. Select the item you want to
send.
3. Press <
Options
> and
select
Send
via
Bluetooth
.
Search for
and pair with
a Bluetooth
device
Send data
4. For a Phonebook entry,
select a sending option.
5. Select a device.
6. If necessary, enter the
Bluetooth PIN and press
<
OK
>.
To receive data via Bluetooth,
your phone’s Bluetooth feature
must be active.
1. When a device attempts to
access your phone, press
<
Yes
> to permit the
connection.
2. If necessary, press <
Yes
>
to confirm that you are
willing to receive.
Receive
data
Step outside the phone
27
Use a memory card
You can use an optional microSD memory card
to increase your phone’s memory capacity.
Frequent erasing and
writing will shorten a card’s
lifespan.
Do not remove a card from
the phone or turn off the
phone while data is being
accessed or transferred.
This could result in loss of
data and/or damage to the
card or phone.
Do not subject cards to
strong shocks.
Do not touch card terminals
with your fingers or metal
objects. If dirty, wipe the
card with a soft cloth.
Important
memory card
information
Keep cards away from small
children or pets.
Do not expose cards in a
place subject to
electro-static discharge
and/or electrical noise.
1. Slide the card into the card
slot, with the label side face
up.
2. Press the card until it locks
into place.
Insert a
memory
card
Step outside the phone
28
1. Press the card so that it is
disengaged from the phone.
2. Slide the card out of the
slot.
Remove the
memory
card
Using a card adapter and a
USB card reader/writer, you
can read the card on a PC.
1. Insert a memory card into a
card adapter, and then the
adapter into a card reader/
writer.
2. Plug the USB connector of
the card reader/writer into
the USB port on your PC.
3. Access the appropriate
memory disk and copy to
and from the card.
Use a card
adapter
29
Enter text
ABC, T9, Number, and Symbol modes
You can enter text in some features such as
Messages, Phonebook, or Calendar, using ABC
mode, T9 mode, Number mode, and Symbol
mode.
Changing the text input mode
The text input mode indicator displays when the
cursor is in a text field.
Press and hold [ ] to switch between T9
() and ABC () modes.
Press [ ] to change case or to switch to
Number mode ( ).
Press and hold [ ] to switch to Symbol
mode ( ).
Using ABC mode
Press the appropriate key until the character
you want appears on the screen.
(creating an SMS message with GSM-alphabet
encoding)
Characters in order displayed
Key Upper case Lower case
Enter text
30
Other ABC mode operations
To enter the same letter twice or to enter a
different letter on the same key, wait for the
cursor to move to the right automatically or
press [Right]. Then, enter the next letter.
Press [ ] to insert a space.
Press the Navigation keys to move the
cursor.
Press [
C
] to delete characters one by one.
Press and hold [
C
] to clear the entire display.
Using T9 mode
T9 is a predictive text input mode that allows
you to key in any character using single
keystrokes.
Entering a word in T9 mode
1. Press [
2
] to [
9
]
to start entering a word.
Press each key once for each letter.
For example, press [
4
], [
3
], [
5
], [
5
], and
[
6
] to enter Hello in T9 mode.
T9 predicts the word that you are typing,
and it may change with each key that you
press.
2. Enter the whole word before editing or
deleting characters.
3. When the word displays correctly, go to step
4. Otherwise, press [
0
] to display alternative
word choices for the keys that you have
pressed.
For example, Of and Me use [
6
] and [
3
].
4. Press
[
]
to insert a space and enter the
next word.
Other T9 mode operations
•Press [
1
] to enter periods or apostrophes
automatically.
Press the Navigation keys to move the
cursor.
Enter text
31
Press [
C
] to delete characters one by one.
Press and hold [
C
] to clear the entire display.
Adding a new word to the T9 dictionary
This feature may not be available for some
languages.
1. Enter the word that you want to add.
2. Press [
0
] to display alternative words for
your key presses. When there are no more
alternative words,
Spell
displays on the
bottom line.
3. Press <
Spell
>.
4. Enter the word you want using ABC mode
and press <
Add
>.
Using Number mode
Number mode enables you to enter numbers.
Press the keys corresponding to the digits you
want.
Using Symbol mode
Symbol mode enables you to insert symbols.
To Press
scroll to a symbol set the Navigation
keys.
select a symbol the corresponding
number key.
clear the symbols [
C
].
insert the symbols <
OK
>.
32
Call functions
Advanced calling features
Making a call
1. In Idle mode, enter the area code and phone
number.
2. Press [ ].
3. When you want to end the call, press [ ].
Making an international call
1. In Idle mode, press and hold [
0
]. The
+
character appears.
2. Enter the country code, area code, and
phone number, then press [ ].
Redialling recent numbers
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press
[].
Making a call from Phonebook
Once you have stored a number in Phonebook,
you can dial the number by selecting it from
Phonebook.
p. 40
You can also use the speed dial feature to
assign your most frequently dialled numbers to
specific number keys.
p. 43
You can quickly dial a number from the SIM
card using the location number assigned when
stored.
1. In Idle mode, enter the location number for
the phone number you want and press [ ].
2. Scroll through other numbers, if necessary.
• Press [
C
] to clear the last digit or press and
hold [
C
] to clear the whole display.
• Press and hold [ ] to enter a pause
between numbers.
Call functions
33
3. Press <
Dial
> or [ ] to dial the number you
want.
Answering a call
When you receive a call, the phone rings and
displays the incoming call image.
Press <
Accept
> or [ ] to answer the call.
Tips for answering a call
When
Anykey
answer
is active, you can
press any key to answer a call, except for
<
Reject
> and [ ].
p. 105
When
Up
in
Slide Settings
is set to
Accept
call
, you can simply open the phone.
p. 102
Press <
Reject
> or [ ] to reject a call.
Press and hold [ / ] to reject a call or mute
the ringer, depending on the
Volume key
setting.
p. 104
Viewing missed calls
If you have missed calls, the screen displays
how many calls you have missed.
1. Press <
View
>.
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
Using the headset
Use the headset to make or answer calls
without holding the phone.
Connect the headset to the jack on the left side
of the phone. The button on the headset works
as follows:
To Press
redial the last call the button and then
press and hold it again.
answer a call the button and hold.
end a call the button and hold.
Call functions
34
Options during a call
You can access a number of functions during a
call.
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume during
a call.
Press [ ] to increase the volume level and [ ]
to decrease the volume level.
Placing a call on hold/Retrieving
Press <
Hold
> to place the call on hold, or press
<
Retrieve
> to retrieve the call.
Making a second call
You can make another call if your network
supports this function.
1. Press <
Hold
> to put the call on hold.
2. Make the second call in the normal way.
3. Press <
Swap
> to switch between the calls.
4. Press <
Options
> and select
End
held
call
to end the call on hold.
5. To end the current call, press [ ].
Answering a second call
You can answer an incoming call while already
on the phone, if your network supports this
function and you have activated the call waiting
feature.
p. 110
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press <
Swap
> to switch between the calls.
Call functions
35
Using the speakerphone feature
Use the speakerphone feature to talk and listen
with the phone a short distance away.
Press [ ] and then <
Yes
> to activate the
speakerphone feature. Press [ ] again to
switch back to the earpiece.
Using In-call options
Press <
Options
> to access the following
options during a call:
Switch to headset
/
Switch to phone
:
switch the call to a Bluetooth headset or
hands-free car kit or back to the phone.
p.
52
Voice clarity on
/
Voice clarity off
: remove
extraneous noise and increase call quality so
that the person with whom you are speaking
can hear you clearly even if you are in a
noisy place.
Mute
/
Unmute
: switch off the phone's
microphone so that the other person on the
phone cannot hear you, or switch it back on.
Mute keys
/
Send keys
: switch the key
tones on or off.
Phonebook
: access the contact list.
Send DTMF
: send the DTMF (Dual tone
multi-frequency) tones as a group. The
DTMF tones are the tones used in phones for
tone dialling, sounding when you press the
number keys. This option is helpful for
entering a password or an account number
when you call an automated system, like a
banking service.
If you are using the speakerphone feature,
you must first deactivate it in order to use the
voice clarity feature.
To communicate with answering machines or
computerised telephone systems,
Send keys
must be selected.
Call functions
36
Message
: read an incoming message and
send a new message.
p. 61
Join
: set up a multi-party call by adding a
caller on hold to a currently active call. You
can include up to five people on a multi-
party call.
Split
: have a private conversation with the
selected participant. The other participants
can converse with each other. After the
private conversation, select
Join
to return
both private participants to the multi-party
call.
Transfer
: transfer the currently active call
to a caller on hold. The two callers can talk
to each other, but you are disconnected from
the call.
Remove
: disconnect the selected
participant.
End held call
: disconnect the call currently
on hold.
SIM service
: access special services, such
as news, weather forecasts, entertainment,
and location services, provided by your SIM
card. This option is available when you use a
SIM card supporting SIM AT menus.
37
Menu functions
All menu options listed
Call log
(Menu 1)
Use this menu to view the calls you have
dialled, received, or missed, and the length of
the calls. You can also check the cost of your
calls, if the SIM card supports this function.
To access this menu, press <
Menu
> in Idle
mode and select
Call log
.
Recent contacts
(Menu 1.1)
This menu displays the most recent calls
dialled, received, or missed.
Accessing a call log
1. Press [Left] or [Right] to move to another
call type.
2. Press [Up] or [Down] to scroll through the
call list.
3. Press [ ] to dial a number, or press [ ]
to view the details of a call.
Using call log options
From the call list, press <
Options
> to access
the following options:
Details
: access the call details.
Call
: make a call to the number.
Add to Phonebook
: save the number in
Phonebook.
Send message
: send an SMS or MMS
message.
Delete
: delete the selected call log or all call
logs.
Reject list
: specify numbers from which you
do not want to accept calls.
Add to reject list
: add the number to the
Reject list.
Menu functions
38
View contact details
: access contact
information, if the caller is saved in
Phonebook.
Missed calls
(Menu 1.2)
This menu displays the most recent received
calls that you did not answer.
Dialled calls
(Menu 1.3)
This menu displays the most recent calls you
have dialled.
Received calls
(Menu 1.4)
This menu displays the most recent calls you
have received.
Delete all
(Menu 1.5)
Use this menu to delete all of the logs in each
call type.
1. Press [ ] to select the call types to be
cleared.
2. Press <
Delete
>.
3. Press <
Yes
> to confirm the deletion.
Call time
(Menu 1.6)
This menu displays the time log for calls made
and received. The actual time invoiced by your
service provider will vary.
Last
call
time
: check the length of your last
call.
Total
sent
: check the total length of all the
calls you have dialled.
Total
received
: check the total length of all
the calls you have received.
Menu functions
Phonebook
(Menu 2)
39
Reset
timers
: reset the call timers. You
need to enter the phone password.
Call costs
(Menu 1.7)
This network feature displays the cost of calls.
This menu is available only if your SIM card
supports this feature. Note that this is not
intended to be used for billing purposes.
Last
call
cost
: check the cost of your last
call.
Total
cost
: check the total cost of all your
calls. If the total cost exceeds the maximum
cost set in
Set
max
cost
, you must reset
the counter before you can make another
call.
Max
cost
: check the maximum cost limit set
in
Set
max
cost
.
Reset
counters
: reset the cost counters.
Set
max
cost
: set the maximum cost
authorised for your calls.
Price/Unit
: set the price per unit that is
applied when the cost of your calls is
calculated.
Phonebook
(Menu 2)
You can store phone numbers on your SIM card
and in your phone’s memory. The SIM card and
phone’s memory are physically separate, but
they are used as a single entity called
Phonebook.
To access this menu, press <
Menu
> in Idle
mode and select
Phonebook
.
The password is preset to
00000000
. You
can change this password.
p. 112
40
Contact list
(Menu 2.1)
Use this menu to search for contacts in
Phonebook.
Finding a contact
1. Enter the first few letters of the name that
you want to find.
2. Select the contact you want from the list.
3. Scroll to a number and press [ ] to dial, or
press [ ] to edit contact information.
Using Phonebook options
While viewing contact details, press
<
Options
> to access the following options:
Edit
: edit contact information.
Send message
: send an SMS or MMS
message to the selected number, or send an
MMS message or e-mail to the selected e-
mail address.
Copy
: copy the number to the phone’s
memory, to the SIM card, or to the FDN list.
Copy to phone
: copy the e-mail address
with the name to a new contact.
Send via
: send the contact via SMS, MMS,
e-mail, or Bluetooth.
Delete
: delete the selected contact.
Mark as default number
: set the selected
number as the default for the contact.
Print via Bluetooth
: print the contact by
connecting the phone to a printer via
Bluetooth. Some printers may not be
compatible with the phone.
You can quickly access this menu by pressing
<
Contacts
> in Idle mode.
Menu functions
Phonebook
(Menu 2)
41
FDN contacts
(Menu 2.2)
Use this menu to create a list of contacts to be
used in FDN (Fixed Dialling Number) mode, in
which the phone allows outgoing calls only to
the specified phone numbers, if your SIM card
supports this feature.
Adding a contact
1. Press <
Options
> and select
Add
.
2. Enter your PIN2 and press <
OK
>.
3. Enter information about the contact:
Name
: assign a name.
Phone number
: add a number.
Location
: assign a location number.
4. Press <
Save
> to save the contact.
Using contact options
From the FDN list, you can access the same
contact options as in Phonebook by pressing
<
Options
>.
Create contact
(Menu 2.3)
Use this menu to add a new contact to
Phonebook.
Storing a contact to the phone’s
memory
1. Select
Phone
.
2. Change the settings or enter information
about the contact:
First name
/
Last name
: assign a name.
Mobile
/
Home
/
Office
/
Fax
/
Other
: add a
number in any category.
You can activate FDN mode in the FDN mode
menu.
p. 112
Menu functions
42
You can change the number type, or set
the number as the default for the contact
by pressing <
Options
> and selecting
Change type
or
Mark as default
number
.
Email
: assign an e-mail address.
Graphic ID
: assign a caller ID image to
alert you to a call from the person.
Ringtone
: assign a ringtone to alert you
to a call from the person.
Group
: assign the number to a caller
group.
Notes
: add a memo about the person.
3. Press <
Options
> and select
Save
, or
<
Save
> to save the contact.
Storing a contact on the SIM card
1. Select
SIM
.
2. Enter information about the contact.
Name
: assign a name
Phone number
: add a number.
Location
: assign a location number.
3. Press <
Save
> to save the contact.
You can set domain name extensions and
retrieve one by pressing <
Options
> and
selecting
Common address
.
The settings specified in
Graphic ID
and
Ringtone
are given priority over group
settings.
To assign a caller ID image, ringtone, or
group, the contact must be saved to the
phone’s memory.
Menu functions
Phonebook
(Menu 2)
43
Group
(Menu 2.4)
Use this menu to organise your contacts in
caller groups.
Adding members to a caller group
1. Select a group.
2. Press <
Add
>.
3. Press [ ] to select the contacts you
want.
4. Press <
Add
>.
Managing caller groups
From the group list, press <
Options
> to access
the following options:
View
: display the members of the selected
group.
Add
: add a new group.
Edit
: change the properties of the selected
group.
Send message
: send an SMS, MMS, or
e-mail to the members you want.
Delete
: delete the selected group. Group
members, however, will not be deleted from
Phonebook.
Speed dial
(Menu 2.5)
Use this menu to assign speed dial numbers (2
to 9) for 8 of your most frequently dialled
numbers.
Assigning speed dial numbers
1. Scroll to a key location from
2
to
9
. Key
1
is
reserved for your voicemail server.
2. Press <
Options
> and select
Add
Contact
or
FDN contact
.
3. Select a contact from the list.
4. Select a number, if the contact has more
than one number.
Menu functions
44
Managing speed dial entries
From the Speed dial screen, press <
Options
>
to access the following options:
Add
: assign a number to an unassigned key.
You can select a contact from Phonebook or
the FDN list.
View
: check the name and number assigned
to the key.
Change
: assign a different number to a key.
Remove
: clear the speed dial setting for a
key.
Dialling speed dial numbers
In Idle mode, press and hold the appropriate
key.
My namecard
(Menu 2.6)
Use this menu to create a name card and send
it to other people.
Saving your name card
The procedure for creating your name card is
the same as the one for saving a number in the
phone’s memory.
p. 41
Using name card options
After saving your name card, press <
Options
>
to access the following options:
Edit
: edit the name card.
Send via
: send the name card via SMS,
MMS, e-mail, or Bluetooth.
Exchange namecard
: exchange the name
card with another person via Bluetooth.
Remove
: delete the name card.
Print via Bluetooth
: print the name card
by connecting the phone to a printer via
Bluetooth. Some printers may not be
compatible with the phone.
Menu functions
Phonebook
(Menu 2)
45
Own number
(Menu 2.7)
Use this feature to check your phone numbers,
or to assign a name to each of the numbers.
Changes made here do not affect the actual
subscriber numbers on your SIM card.
Management
(Menu 2.8)
Use this menu to manage Phonebook.
Save new contacts to
: select a default
memory location for saving contacts. If you
select
Always ask
, the phone will ask you to
select a memory location each time you save
a number.
Copy all
: copy all of the contacts stored on
the SIM card to the phone’s memory, or vice
versa.
List by
: sort your contacts by the first name
or last name.
Delete all
: delete all of the contacts from
your phone’s memory, your SIM card, the
FDN list, or all of them.
Memory status
: display the number of
contacts you have stored in Phonebook.
Service number
(Menu 2.9)
Use this menu to view the list of Service Dialling
Numbers (SDN) assigned by your service
provider, including emergency numbers and
numbers for directory enquiries. This menu is
available if your SIM card supports SDN.
1. Scroll to the number you want.
2. Press <
Dial
> or [ ].
Menu functions
46
Applications
(Menu 3)
Use this menu to play Java applications, play
music files, or edit photos. You can also use the
Bluetooth feature.
To access this menu, press <
Menu
> in Idle
mode and select
Applications
.
Music Player
(Menu 3.1)
Use this menu to enjoy music. First, you need
to save music files in your phone’s memory. To
enjoy high quality music, you can use an
optional Bluetooth stereo headset.
Downloading or receiving music files
You can play *.mp3, *.aac, *.aac+, and *.m4a
files.
Use the following methods to save music files to
your phone:
Download from the wireless web
p. 57
Download from a computer using the
optional Samsung PC Studio programme
Samsung PC Studio User’s Guide
Receive via an active Bluetooth connection
p. 54
Copy to a memory card and insert it into the
phone
p. 27
Creating a play list
Add the music files to the play list so you can
play them.
1. From the music player screen, press
<
Options
> and select
Add music from
a
memory location.
2. Press [ ] to select the files you want and
press <
Add
>.
Normal headsets and Bluetooth mono headsets
are not compatible with the music player.
Menu functions
Applications
(Menu 3)
47
Playing music files
1. From the music player screen, press
<
Options
> and select
Play via
.
2. Select
Phone
to use the phone speaker.
Select
Bluetooth stereo headset
to use a
Bluetooth stereo headset, and then search
for and connect the phone to the headset.
During playback, use the following keys:
Using music player options
From the music player screen, press
<
Options
> to access the following options:
Play via
: play the selected file via the phone
speaker or a Bluetooth stereo headset.
Play
/
Pause
: begin or pause playback.
Transfer to Bluetooth stereo headset
/
Transfer to phone
: switch the sound
output to a Bluetooth headset or the phone
speaker.
Key Function
Pauses or resumes playback.
Left Returns to the previous file.
Moves backward in a file when
held down.
Right Skips to the next file. Skips
forward in a file when held down.
Up Opens the current play list.
Down Stops playback.
/ Adjusts the volume.
1
Changes the repeat mode.
2
Changes the playback animation.
3
Sets the music player to play
tracks in random order.
Key Function
Menu functions
48
Open playlist
: access the current play list
or all play lists.
Remove from playlist
: remove the
selected file from the play list.
Send via
: send the file via MMS, e-mail or
Bluetooth.
Set as
: set the file as your ringtone, as a
ringtone for a Phonebook entry, or as a
ringtone for alarms.
Settings
: change the default settings for
playing music files.
Repeat mode
: select a repeat mode.
Shuffle
: set the music player to play tracks
in random order.
Visualisation
: change the playback
animation.
Volume
: select a volume level.
Details
: access the file properties.
Shortcuts
: view the functions of the keys
you can use during playback.
Accessing the play list
From the music player screen, press [Up].
Press <
Options
> to access the following
options:
Play via
: play the selected file via the phone
speaker or a Bluetooth stereo headset.
Add music
: add files to the play list.
Move track in playlist
: move the selected
file to the position you want within the play
list.
Go to all playlists
: access all play lists.
Move to
: move the selected file to another
play list.
Copy to
: copy the selected file to another
play list.
Remove
: remove the selected file or all files
from the play list.
Menu functions
Applications
(Menu 3)
49
Voice recorder
(Menu 3.2)
Use this menu to record voice memos. A voice
memo can be up to one hour long.
Recording a voice memo
1. Press [ ] to start recording.
2. Speak into the microphone.
Press [ ] to pause or resume the
recording.
3. When you have finished, press <
Save
> or
[Down]. The voice memo is automatically
saved.
4. Press [ ] to review the voice memo, or
press [Up] to record additional memos.
Playing a voice memo
1. From the Voice recorder screen, press
<
Options
> and select
Go to My voice
clips
.
2. Select a voice memo. The memo plays.
During playback, use the following keys:
Using voice recorder options
From the Voice recorder screen, press
<
Options
> to access the following options:
Record
: record a new voice memo.
Go to My voice clips
: access the voice
memo list.
Key Function
Pauses or resumes playback.
Left Moves backward in a memo.
Right Skips forward in a memo.
/Adjusts the volume.
Down Stops playback.
Menu functions
50
Settings
: customise the default settings for
the voice recorder:
Recording time
: select a recording time.
Volume
: select a volume level.
Default name
: change the default prefix of
file names.
Visualisation
: change the playback
animation.
Image editor
(Menu 3.3)
Use this menu to edit your photos using an
assortment of editing tools.
Applying an effect
1. Press <
Options
> and select
New image
Open
or
Take photo
.
2. Select a photo or take a new photo.
3. Press <
Load
>, or press <
Options
> and
select
Load
.
4. Press <
Options
> and select
Effects
an
effect option.
5. Press <
Done
>.
6. Press <
Options
> and select
Save as
.
7. Press <
Yes
>.
8. Enter a new file name and press [ ].
Adding visual features
You can decorate photos by adding a frame, or
an image.
1. Select a photo or take a new photo.
2. Press <
Load
>, or press <
Options
> and
select
Load
.
3. Press <
Options
> and select
Insert
a
feature type.
Frame
: add a decorative frame.
Clip Art
: add an image clip.
Emoticon
: add an emoticon.
Menu functions
Applications
(Menu 3)
51
4. Select an item.
5. Adjust the position of the inserted item and
press <
Done
>.
6. Press <
Options
> and select
Save as
.
7. Press <
Yes
>.
8. Enter a new file name and press [ ].
Bluetooth
(Menu 3.4)
Using Bluetooth wireless, you can connect the
phone wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or
control the phone remotely.
Bluetooth technology allows free wireless
connections between all Bluetooth-compliant
devices within a range of 10 metres. Since the
devices communicate using radio waves, they
do not need to be in line of sight to each other.
Setting up the Bluetooth feature
The
Bluetooth
menu provides the following
options:
Activation
: activate or deactivate the
Bluetooth feature.
My devices
: search for connectable
Bluetooth devices.
My phone’s visibility
: allow other
Bluetooth devices to connect to your phone.
• If there are obstacles between the devices,
the maximum operating distance may be
reduced.
• It is recommended that you do not use the
Bluetooth feature while using multimedia
features, such as voice recorder, camera, and
music player, or vice versa, for better
performance.
• Some devices may not be compatible with
your phone.
Menu functions
52
My phone’s name
: assign a Bluetooth
device name to your phone, which is then
displayed on other devices.
Secure mode
: determine if the phone asks
for your confirmation when other devices
access your data.
Bluetooth services
: display available
Bluetooth services.
Searching for and pairing with a
Bluetooth device
1. From the
Bluetooth
menu, select
My
devices
.
2. Select
Search new device
.
After searching, a list of devices to which you
can connect displays. The following icons
indicate the kind of device:
Stereo headset
Mobile phone
• Computer
• PDA
Unknown device
• Printer
Mono headset/Hands-free car kit
The colour of the icon indicates the status of
the device:
Grey for unpaired devices
Blue for paired devices
Red for devices that are currently
connected to your phone
3. Select a device.
4. Enter a Bluetooth PIN and press <
OK
>.
This
code is used just once and you do not need to
memorise it.
When the owner of the other device enters
the same code, pairing is finished.
Menu functions
Applications
(Menu 3)
53
Using device options
From the device list, press <
Options
> to
access the following options:
Connect
: connect to a headset or hands-
free car kit.
Disconnect
: end the connection with the
connected device.
Browse files
: search for data from the
device and import data directly to your
phone.
Service list
: access the Bluetooth service
list of the device.
Rename
: rename the paired device.
Authorise device
/
Unauthorise device
:
determine whether or not the phone asks
you to permit connection when other devices
try to connect to your phone.
Delete
: remove the selected device or all
devices from the list.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item you
want to send is stored.
3. Scroll to the item you want and press
<
Options
>.
4. Select
Send
via
Bluetooth
.
The phone searches for devices within range
and displays a list of available devices.
5. Select a device.
6. If necessary, enter the Bluetooth PIN needed
for pairing and press <
OK
>.
Some devices, especially headsets or hands-free
car kits, may have a fixed Bluetooth PIN, such as
0000
. If the other device has one, you must
enter the code.
Menu functions
54
Receiving data via Bluetooth
To receive data via Bluetooth, your phone’s
Bluetooth feature must be active and its
visibility must be enabled.
If an unauthorised Bluetooth device sends data
to your phone, the phone displays a
confirmation message. To receive data, press
<
Yes
>.
Java world
(Menu 3.5)
Use this menu to access the embedded Java
games and downloaded Java applications.
Playing a game
Select a game from the game list and follow the
onscreen instructions. The procedure may differ
from game to game.
Using Java application options
From the application list, press <
Options
> to
access the following options:
Start
: launch the selected application.
Delete
: delete the selected application.
Details
: access the application properties.
Permission
: set permission settings for
services charging you additional costs, such
as network access and SMS.
Lock
/
Unlock
: lock the application to protect
it from being deleted, or unlock the
application.
Upgrade
: upgrade the application to the
latest version, except for embedded games.
Send information
via Text message
: send
the URL address containing the application
via SMS, except for embedded games.
Memory status
: access memory
information for applications.
Menu functions
Applications
(Menu 3)
55
Network settings
:
customise a connection
profile to be used for applications requiring
network access. The following options are
available:
APN
: enter the access point name of the
network gateway.
Login ID
: enter the user ID.
Password
: enter the password.
Proxy
: select whether or not the phone uses
a proxy server to launch the web browser.
Proxy settings
: customise the following
proxy settings:
When the proxy is set to
Enable
:
-
IP address
: enter the gateway address.
-
Port
: enter the port number.
When the proxy is set to
Disable
:
-
DNS1
: enter the primary address.
-
DNS2
: enter the secondary address.
FM radio
(Menu 3.6)
Use this menu to listen to music or news via the
FM radio on your phone.
Turning on and listening to the radio
First, you must connect your phone with the
headset, which serves as a radio antenna.
1. Plug the connecter of the supplied headset
into the jack on the right side of the phone.
2. From the radio screen, press [ ].
3. Press [Left] or [Right] to find the radio
station you want.
You can also press and hold [Left] or [Right]
to scan through available radio stations.
4. To exit the FM Radio menu without turning
off the radio, press [ ].
This enables you to access other functions
while listening to the radio.
Menu functions
56
Turning off the radio
From the radio screen, press [ ], or
disconnect the headset from the phone.
Setting up a radio station list
You can store your favourite radio stations to
quickly access them.
1. Connect the headset to the phone and turn
on the radio.
2. Press <
Options
> and select
Add
.
3. Enter a title for the station you want and the
frequency of the station, and press <
OK
>.
4. Select a location in which you want to store
the station.
5. Repeat from step 2 to store other stations.
To listen to your stored stations, press [Up] or
[Down] from the radio screen.
Using radio options
From the radio screen, press <
Options
> to
access the following options:
FM radio off
/
FM radio on
: turn the radio
off or on.
Add
: store a radio station.
Edit
: edit the title or frequency for a saved
radio station.
Self-tuning
: let the phone automatically
scan through and save available radio
stations.
Remove
: remove the selected station or all
stations.
Pop-up alert
: set the phone to alert you to
listen to the radio at a specified time. When
the pop-up notification appears on the
screen, press <
Listen
> to turn on the
specified radio station.
Menu functions
Browser
(Menu 4)
57
Speaker on
/
Earphone on
: change sound
output to the phone speaker or headset.
Settings
: select the radio volume.
SIM-AT
(Menu 3.7)
This menu is available if you use a SIM-AT card
that supports SIM Application Toolkit menus
and provides additional services, such as news,
weather, sports, entertainment, and location
services. Available services may vary,
depending on your service provider’s plans. For
details, see your SIM card instructions or
contact your service provider.
Browser
(Menu 4)
The Wireless Application Protocol (WAP) on
your phone allows you to access the wireless
web. Using the web browser, you can access
up-to-date information and a wide variety of
media content, such as wallpapers, ringtones,
and music files.
To access this menu, press <
Menu
> in Idle
mode and select
Browser
.
Home
(Menu 4.1)
Use this menu to connect your phone to the
network and load the homepage of the wireless
web service provider. You can also press [ ]
in Idle mode.
Menu functions
58
Navigating the web browser
Using browser options
1. Select or press [ ].
2. Select one of the following browser options:
Back
: go back to the previous page.
Home
: go back to the homepage.
Exit
: exit the web browser.
Reload
: reload the current page.
Show URL
: display the URL address of
the current web page.
About...
: access version and copyright
information about the browser.
Accessing other phone menus
From any web page, press [ ] to access the
following options:
Enter URL
: enter a URL address manually.
Bookmarks
: switch to the
Bookmarks
menu.
Messages
: check the messages stored in
the
My messages
folder. You can also
create and send a new SMS message.
My files
: switch to the
My files
menu.
Exiting the browser
Press [ ] to end the network connection and
exit the browser.
To Press
scroll through browser
items
[Up] or [Down].
select a browser item < > or [ ].
return to the previous
page
<
Back
> or [
C
].
return to the homepage and hold [
C
].
Menu functions
Browser
(Menu 4)
59
Bookmarks
(Menu 4.2)
Use this menu to save URL addresses in order
to quickly access web pages, or access the
preset bookmarks.
Adding a bookmark
1. Select an empty location.
2. Enter a title for the bookmark and press
[Down].
3. Enter a URL address and press [ ].
Accessing a bookmarked page
Selecting a bookmark item launches the web
browser and accesses the associated web page.
Using bookmark options
From the bookmark list, press <
Options
> to
access the following options:
Open
: access the website.
Edit
: edit the address and name of the
bookmark.
Delete
: delete the currently selected
bookmark or all bookmarks.
Enter URL
(Menu 4.3)
Use this menu to manually enter the URL
address of a website and access the website.
Clear cache
(Menu 4.4)
Use this menu to clear the cache, which is a
temporary memory site that stores recently
accessed web pages.
Profile settings
(Menu 4.5)
Use this menu to set up servers for the web
browser. Contact your service provider for
details about your setting options.
Menu functions
60
For each server, the following options are
available:
Profile
name
: assign a name to the server
profile.
Home
URL
: enter the address of your
homepage.
Bearer
: select a bearer for each type of
network address accessed.
Proxy
: select whether or not the phone uses
a proxy server to launch the web browser.
GPRS settings
: customise the GPRS
network settings:
When the proxy is set to
Enable
:
Proxy IP
: enter the web gateway address.
Proxy port
: enter the port number.
APN
: enter the access point name of the
GPRS network gateway.
Login ID
: enter the user ID.
Password
: enter the password.
When the proxy is set to
Disable
:
DNS1
: enter the primary address.
DNS2
: enter the secondary address.
APN
: enter the access point name of the
GPRS network gateway.
Login ID
: enter the user ID.
Password
: enter the password.
GSM settings
: customise the following GSM
network settings:
When the proxy is set to
Enable
:
Proxy IP
: enter the web gateway address.
Proxy port
: enter the port number.
Dial number
: enter the PPP server phone
number.
Login ID
: enter the user ID.
Password
: enter the password.
Data call type
: select a data call type.
When the proxy is set to
Disable
:
DNS1
: enter the primary address.
Menu functions
Messages
(Menu 5)
61
DNS2
: enter the secondary address.
Dial number
: enter the PPP server phone
number.
Login ID
: enter the user ID.
Password
: enter the password.
Data call type
: select a data call type.
Current profile
(Menu 4.6)
Use this menu to activate one of the proxy
servers you have set up.
Messages
(Menu 5)
Use the
Messages
menu to send and receive
short messages, multimedia messages, and e-
mails. You can also access push messages,
voicemails, and cell broadcast messages.
To access this menu, press <
Menu
> in Idle
mode and select
Messages
.
Create new message
(Menu 5.1)
Use this menu to create and send text
messages, multimedia messages, or e-mails.
Text message
(Menu 5.1.1)
Short Message Service (SMS) allows you to
send or receive text messages including
pictures, audio clips, and animated images.
Creating and sending an SMS message
1. Enter your message and press [ ].
• The maximum number of characters
allowed in a message varies by service
provider. If your message exceeds the
maximum number of characters, the phone
will split the message.
• You can use various options by pressing
<
Options
>.
next section
Menu functions
62
2. Enter a destination number.
To send the message to more than one
recipient, fill in additional destination fields.
3. Press [ ] to send the message.
Using options while composing an SMS
message
While composing a message, press <
Options
>
to access the following options:
Send only
: send the message.
Save and send
: save the message in
Sentbox
and then send it.
Insert
: add a text template, Phonebook
entry, or bookmark.
Add picture
/
Add animation
/
Add melody
:
attach a simple image, an animated image,
or a melody.
Attach
: add a name card or calendar data
as a data format attachment.
Save in
: save the message in another
message folder.
Input language
: change the language to
be used in T9 input mode.
Text style
: change the text attributes.
Multimedia message
(Menu 5.1.2)
Multimedia Message Service (MMS) delivers
messages containing a combination of text,
image, video, and audio, from phone to phone
or from phone to e-mail.
Creating and sending an MMS message
1. Select the
Subject
line.
2. Enter the message subject and press [ ].
3. Select the
Image or video
line.
You can use
various options
by pressing
<
Options
> in each field.
next section
Menu functions
Messages
(Menu 5)
63
4. Select
Add image
or
Add video
and add an
image or a video clip.
5. Select the
Sound
line.
6. Select
Add sound
and add a sound clip.
7. Select the
Text
line.
8. Enter the message text and press [ ].
9. When you have finished, press <
Options
>
and select
Send
.
10.Enter a phone number or an e-mail address.
To send the message to more than one
recipient, fill in additional destination fields.
11.Press [ ] to send the message.
Using options while composing an MMS
message
While composing a message, press <
Options
>
to access the following options:
Add
: add the message subject or message
text.
Add image
/
Add video
/
Add sound
/
Add
music
: add media files stored in the phone’s
memory.
Change image
/
Change video
/
Change
sound
: replace an item.
Edit
: edit the subject or text.
Preview
: view the message as it will be
shown on the recipient’s phone.
View
: open the selected attachment.
Send
: send the message.
• The maximum size allowed for a message
can differ, depending on your service
provider.
• Depending on the file type or DRM (Digital
Rights Management) system, some files
may not be able to be forwarded.
Attached files from the
Other files
folder
cannot be open in your phone.
Menu functions
64
Save in
: save the message in another
message folder.
Add page
: add pages. Move to each page
by pressing [Left] or [Right].
Delete page
: delete a page.
Edit page
: change the duration of page
display or move the page forward or
backward among the other pages.
Attach
: attach a Phonebook entry as a
name card or calender data as a data format
attachment, or a document file stored in the
Other files
folder.
Remove subject
/
Remove text
/
Remove
media
/
Remove
: remove an added item.
Email
(Menu 5.1.3)
You can create and send e-mails that include
text, audio, and images. To use this feature,
you need to subscribe to an e-mail service and
set up your e-mail account and profile.
p. 77,
p. 79
Creating and sending an e-mail
You can create and send e-mails.
1. Select the
Subject
line.
2. Enter the subject of your e-mail and press
[].
3. Select the
Message
line.
4. Enter the e-mail text and press [ ].
5. Select the
File attach
line.
6. Add media files, document files stored in the
Other files
folder, or Phonebook entries as
name cards or calender data as data format
attachments.
You can use
various options
by pressing
<
Options
> in each field.
next section
Depending on the file type or DRM (Digital
Rights Management) system, some files may
not be able to be forwarded.
Menu functions
Messages
(Menu 5)
65
7. When you have finished, press <
Options
>
and select
Send
.
8. Enter an e-mail address.
To send the e-mail to more than one
recipient, fill in additional destination fields.
9. Press [ ] to send the e-mail.
Using options while composing an e-mail
While composing an e-mail, press <
Options
>
to access the following options:
Add
: add the subject of your e-mail or
e-mail text.
Edit
: edit the subject or text.
Add image
/
Add videos
/
Add sounds
/
Add
music
: add media files stored in the phone’s
memory.
Add other file
: add document files stored in
the
Other files
folder.
Add from memory card
: add files stored
on a memory card.
View
/
Play
: open the selected attachment.
Send
: send the e-mail.
Save in
: save the e-mail in another
message folder.
Attach
: attach Phonebook entries as name
cards or calender data as data format
attachments.
Remove subject
/
Remove message
: clear
the subject or text.
Remove all attachments
: delete all
attachments.
Remove
: delete the selected attachment or
all attachments.
Attached files from the
Other files
folder
cannot be open in your phone.
Menu functions
66
My messages
(Menu 5.2)
Use this menu to access messages you have
received, sent, or which have failed in sending.
Inbox
(Menu 5.2.1)
This folder stores all of the messages you have
received, except for e-mails.
Viewing a message
The following icons may appear on the message
list to show the message type:
• SMS
MMS
MMS notification ( : Being retrieved,
: Failed to be retrieved)
• Voicemail
Push message from web servers
Configuration message, containing
network parameters from your service
provider
Broadcast message from your service
provider
Delivery report for your sent messages
Using message options
While viewing a message, press <
Options
> to
access the following options:
SMS messages
Reply via
: send a reply to the sender via
SMS or MMS.
Forward
: forward the message to other
people.
Delete
: delete the message.
Move to phone
/
Move to SIM
: move the
message between the SIM card and the
phone’s memory.
A
!
icon next to a message means that the
message is of high priority. A grey-coloured
message icon indicates low priority.
Menu functions
Messages
(Menu 5)
67
Add to block list
: add the sender’s number
to the Block list to reject the messages from
the sender.
Cut
address
: extract URL addresses, e-mail
addresses, or phone numbers from the
message.
Attached items
: save media contents from
the message to your phone’s memory.
Print via Bluetooth
: print the message by
connecting the phone to a printer via
Bluetooth. Some printers may not be
compatible with the phone.
Lock
/
Unlock
: lock the message to protect it
from being deleted, or unlock the message.
MMS messages
Retrieve
: retrieve the MMS message from
the server.
Reply via Text message
: send a reply to
the sender via SMS.
Reply via Multimedia message to
: send a
reply via MMS to the sender or all recipients.
Forward
: forward the message to other
people.
Delete
: delete the message or all messages.
Add to block list
: add the sender’s number
to the Block list to reject the messages from
the sender.
Cut
address
: extract URL addresses, e-mail
addresses, or phone numbers from the
message.
Attached items
: save media contents from
the message to your phone’s memory.
Lock
/
Unlock
: lock the message to protect it
from being deleted, or unlock the message.
Details
: access the message properties.
Push messages
Go to URL
: connect to the URL address
specified in the message.
Delete
: delete the message.
Menu functions
68
Cut address
: extract URL addresses, e-mail
addresses, or phone numbers from the
message.
Configuration messages
Install
: apply the configuration value in the
message to the phone.
Cut
address
: extract URL addresses, e-mail
addresses, or phone numbers from the
message.
Delete
: delete the message.
Lock
/
Unlock
: lock the message to protect it
from being deleted, or unlock the message.
Draft
(Menu 5.2.2)
This folder stores messages you have saved to
send at a later time.
When you select an SMS or e-mail message, it
opens in Edit mode so that you can edit and/or
send the message.
When you select an MMS message, it opens in
Preview mode as would a message from the
Inbox. To edit the MMS message, press
<
Options
> and select
Edit
.
Outbox
(Menu 5.2.3)
This folder stores messages that the phone is
attempting to send or has failed to send.
While viewing a message, press <
Options
> to
access the following options:
View
/
Play
: open the selected attachment.
Register
: save the attached name cards
and calendar items to the phone.
Save to My files
: save the selected
attachment.
Send again
: retry sending the message.
Forward
: forward the message to other
people.
Delete
: delete the message.
Menu functions
Messages
(Menu 5)
69
Move to phone
/
Move to SIM
: move the
message between the SIM card and the
phone’s memory.
Print via Bluetooth
: print the message by
connecting the phone to a printer via
Bluetooth. Some printers may not be
compatible with the phone.
Lock
/
Unlock
: lock the message to protect it
from being deleted, or unlock the message.
Details
: access the message properties.
Sentbox
(Menu 5.2.4)
This folder stores messages that you have sent
successfully.
While viewing a message, press <
Options
> to
access the following options:
View
/
Play
: open the selected attachment.
Register
: save the attached name cards
and calendar items to the phone.
Save to My files
: save the selected
attachment.
Forward
: forward the message to other
people.
Delete
: delete the selected message.
Move to phone
/
Move to SIM
: move the
message between the SIM card and the
phone’s memory.
Print via Bluetooth
: print the message by
connecting the phone to a printer via
Bluetooth. Some printers may not be
compatible with the phone.
Lock
/
Unlock
: lock the message to protect it
from being deleted, or unlock the message.
Details
: access the message properties.
Menu functions
70
Email inbox
(Menu 5.2.5)
This folder stores e-mails that you have
received.
Viewing an e-mail
1. Press <
Select
> when
Check new mail
displays. The phone checks the e-mail server
and downloads new e-mails.
The following icons may appear on the list to
show the e-mail status:
Retrieved from the server
Being retrieved
Failed to be retrieved
2. Select an e-mail or a header.
3. Press [ / ] to view other pages in the
e-mail.
Press and hold [ / ] to move to the first or
last page in the e-mail.
4. Press [ ] or [ ] to view the next or
previous e-mail.
Using e-mail options
While viewing the e-mail or header, press
<
Options
> to access the following options:
Retrieve
: retrieve the body of the e-mail
from the e-mail server.
View
/
Play
: open the selected attachment.
Register
: save the attached name cards
and calendar items to the phone.
Save to My files
: save the selected
attachment.
Reply to
: send a reply to the sender or all
recipients.
Forward
: forward the e-mail to other
people.
A ! icon next to a message means that the
e-mail is of high priority. A grey-coloured e-
mail icon indicates low priority.
Menu functions
Messages
(Menu 5)
71
Delete
: delete the e-mail from the phone’s
memory or from both the phone’s memory
and the e-mail server.
Add to block list
: add the sender’s e-mail
address or subject to the Block list to reject
e-mails from that address or containing that
subject.
Cut address
: extract URL addresses, e-mail
addresses, and phone numbers.
Attached items
: save the selected
attachment or all attachments from the e-
mail to your phone’s memory.
Print via Bluetooth
: print the e-mail by
connecting the phone to a printer via
Bluetooth. Some printers may not be
compatible with the phone.
Lock
/
Unlock
: lock the message to protect it
from being deleted, or unlock the message.
Details
: access the e-mail properties.
My folder
(Menu 5.2.6)
Use this menu to view the messages you have
moved to this folder using the
Move to my
folder
option while viewing a message list.
Templates
(Menu 5.3)
Use this menu to make and use templates of
frequently used messages or passages.
Text template
(Menu 5.3.1)
You can create SMS templates with the
sentences you use frequently so that you can
retrieve and insert them when composing an
SMS message or passages.
Creating a template
1. Select an empty location.
2. Enter a message and press [ ].
Menu functions
72
Using template options
From the template list, press <
Options
> to
access the following options:
Edit
: edit the template.
Send
: create and send a new message via
SMS, MMS, or e-mail using the selected
template.
Delete
: delete the selected template.
Multimedia message templates
(Menu
5.3.2)
You can access embedded MMS templates or
ones you have saved so that you can use them
in composing an MMS message.
Creating a template
1. Press <
Options
> and select
Add new
.
2. Create a template as you would when
creating an MMS message.
3. Press <
Options
> and select
Save in
Templates
.
Using template options
From the template list, press <
Options
> to
access the following options:
View
: open the selected template.
Send
: send the selected template.
Edit
: edit the selected template.
Add new
: add a new template.
Delete
: delete the selected template or all
templates. You cannot delete the embedded
templates.
Delete all
(Menu 5.4)
Use this menu to delete all messages in each
message type at once.
1. Press [ ] to select the message folders
to be cleared.
2. Press <
Delete
>.
3. Press <
Yes
> to confirm the deletion.
Menu functions
Messages
(Menu 5)
73
Settings
(Menu 5.5)
Use this menu to set up for using the
messaging service.
Text messages
(Menu 5.5.1)
You can configure default SMS settings.
Sending options
: set up the options for
sending SMS messages:
Reply path
: allow recipients to reply to you
through your SMS server.
Request delivery receipt
: set the network
to inform you when messages have been
delivered.
Character support
: select a character
encoding type. When you select
Auto
, the
phone switches the encoding type from
GSM-alphabet to Unicode if you enter an
Unicode character. Use of Unicode encoding
will reduce the maximum number of
characters in a message to about half.
If this menu is not shown, your phone
provides the automatic character encoding
by default.
Validity period
: set the length of time your
messages are stored in the SMS server.
Message type
: set the default message
type. The network can convert messages
into the selected format.
Service centre
: store or change the
number of SMS server.
Block number
: store the phone numbers
from which you want to reject SMS
messages.
Multimedia messages
(Menu 5.5.2)
You can configure default MMS settings.
Sending options
: set up the options for
sending MMS messages:
Request delivery receipt
: set the network
to inform you when your messages have
been delivered.
Menu functions
74
Address hiding
: set your address to be
hidden from the recipient’s phone.
Request read receipt
: send a read-reply
request along with your messages.
Priority
: set the priority level of your
messages.
Expiry
: set the length of time your
messages are stored in the MMS server.
Delivery time
: set a time delay before
messages are sent.
Receiving options
: set up the options for
receiving MMS messages:
Anonymous reject
: reject messages from
unknown senders.
Advert allowed
: accept advertisements.
Report allowed
: set the network to inform
the sender when a message has been
delivered to you.
Home network
: determine if your phone
retrieves new messages automatically when
you are in your home service area.
Network when abroad
: determine if your
phone retrieves new messages automatically
when you are roaming on another network.
Reception within home network or abroad
has the following options:
-
Automatic
: the phone automatically
retrieves messages from the server.
-
Reject
: the phone rejects all messages.
-
Manual
: the phone displays notifications.
Use the
Retrieve
option to manually
download new messages.
Multimedia message profile
: set up an
MMS profile and select a profile to be used.
Current profile
: select a profile.
Profile settings
: configure MMS profiles
using different MMS servers:
-
Profile name
: assign a name to the MMS
profile.
-
Server URL
: enter the address of your
MMS server.
Menu functions
Messages
(Menu 5)
75
-
Proxy
: connect to the GPRS network using
the proxy server.
-
GPRS settings
: customise the settings
required for connecting to the GPRS
network.
When the proxy is set to
Enable
:
IP address
: enter the gateway address.
Port
: enter the port number.
APN
: enter the access point name used for
the address of the GPRS network.
Login ID
: enter the user ID.
Password
: enter the password.
When the proxy is set to
Disable
:
DNS1
: enter the primary address.
DNS2
: enter the secondary address.
APN
: enter the access point name used for
the address of the GPRS network.
Login ID
: enter the user ID.
Password
: enter the password.
-
Version
: select an available OMA version
and maximum size limit for sending or
receiving messages.
Block number
: specify phone numbers
from which messages will not be accepted.
Numbers specified here are also included in
the SMS blocking list.
Message class
: select the type of message
content you will add or the message size.
Text only
: you can add only text of up to 30
KB.
Small imaging
: you can add any type of
items, except for video, of up to 30 KB.
Moderate imaging
: you can add any type
of items, except for video of up to 100 KB.
Depending on your service provider, it may
not be possible to support the maximum limit
300KB. In this case, try again after changing
the setting to 100KB.
Menu functions
76
Small video
: you can add any type of items
of up to 100 KB.
Moderate video
: you can add any type of
items of up to 300 KB.
Creation mode
: select an MMS creation
mode.
Warning
: you can create a message with
any type of content and of any size, but the
phone will inform you when the content and
size have exceeded the maximum.
Free
: you can create a message with any
type of contents and of any size.
Restricted
: you can create a message with
the type of content and size specified in
Message class
.
Emails
(Menu 5.5.3)
You can configure default e-mails settings.
Sending options
: set up the options for
sending e-mails:
Send copy to self
: send a copy of your
e-mail to your e-mail account.
Request delivery receipt
: set the network
to inform you when e-mails have been
delivered.
Request read receipt
: send a read-reply
request along with your e-mails.
Priority
: select the priority level of your
e-mails.
Add signature
: attach your name, phone
number, or a simple memo to e-mails.
Edit name
: enter the name in your
signature.
Edit telephone number
: enter the phone
number in your signature.
Edit note
: enter the tag line in your
signature.
You cannot change e-mail profile and account
settings while an e-mail is being sent or retrieved.
Menu functions
Messages
(Menu 5)
77
Receiving options
: set up the options for
receiving e-mails:
Check interval
: set how often the phone
checks the e-mail server for downloading
new e-mails. If you select
Not used
, use the
Check for new email
option to receive new
e-mails manually.
Send read receipt
: determine whether or
not the phone sends a read-reply for
incoming e-mails. If you select
Announce
,
the phone asks you to send a read-reply.
Retrieve option
: set whether the phone
downloads e-mail headers only or e-mail
headers and bodies both.
Delete option
: determine whether e-mails
are deleted immediately or the next time
you connect to the server.
Keep in server
: leave the copies of e-mails
in the server after retrieving.
Email accounts
: set up an e-mail account
and select an account to be used:
Current account
: select an account.
Account settings
: configure e-mail
accounts using different e-mail servers.
Press <
Create
>, or press <
Options
> and
select
Create
, if one has already been
saved.
-
In use
: select this option to use the
account and to display the account in
Email inbox
.
-
Account name
: enter a name for the
currently selected account.
To access the following options, press
<
Options
> and select
Next
, or press
[].
-
User name
: enter a user name.
-
Email address
: enter your e-mail
address.
-
Reply address
: enter your e-mil address
to be used when the recipient sends a
reply.
Menu functions
78
To access the following options, press
<
Options
> and select
Next
, or press
[].
-
SMTP server
: enter the IP address or host
name of the outgoing e-mail server.
-
SMTP port
: enter the SMTP port number.
-
SMTP user ID
: enter the SMTP user
name.
-
SMTP password
: enter the SMTP
password.
-
Retrieve server type
: select the protocol
for the incoming e-mail server. The
remaining options depend on the protocol
type setting.
When the protocol type is
POP3
:
-
POP3 server
:
enter the IP address or host
name of the server that receives your
e-mail.
-
POP3 port
: enter the POP3 port number.
-
Same ID and password
: select if you
want to have the same user ID and
password with the outgoing e-mail server.
-
POP3 user ID
: enter the POP3 user name.
-
POP3 password
: enter the POP3
password.
-
APOP login
: connect to the server by
using the APOP login scheme when this
option is selected.
When the protocol type is
IMAP4
:
-
IMAP4 server
: enter the IP address or
host name of the server that receives your
e-mail.
-
IMAP4 port
: enter the IMAP4 port
number.
-
Same ID and password
: select if you
want to have the same user ID and
password with the outgoing e-mail server.
-
IMAP4 user ID
: enter the IMAP4 user
name.
Menu functions
Messages
(Menu 5)
79
-
IMAP4 password
: enter the IMAP4
password.
-
Include attachments
: select this option
to receive attachments with e-mails.
-
Email retrieval limit
: set the number of
headers you will retrieve from the server.
Email profiles
: set up an e-mail profile and
select a profile to be used.
Current profile
: select a profile.
Profile settings
: configure e-mail profiles
using different e-mail servers. Set the
options for each profile:
-
Profile name
: enter a name for the e-mail
profile.
-
APN
: enter the access point name used for
the GPRS network address.
-
Login ID
: enter the user ID.
-
Password
: enter the password.
-
DNS1
: enter the primary address.
-
DNS2
: enter the secondary address.
Block list
: specify e-mail addresses or
subjects you want to reject.
Push message
(Menu 5.5.4)
You can change the settings for receiving push
messages from the wireless web server.
Receive
: set how your phone receives push
messages.
Service centre
: enter the address of the
server from which you want to receive push
messages.
SOS message
(Menu 5.6)
In an emergency, you can send an SOS
message to your family or friends for help. You
can also receive an SOS message from other
people who are in an emergency. Use this menu
to specify options for sending and receiving an
SOS message.
Menu functions
80
Sending options
: set up the options for
sending an SOS message:
Sending SOS
: activate or deactivate the
SOS message feature. To send an SOS
message, press [ / ] 4 times in Idle mode,
with the phone closed.
Recipients
: specify the phone numbers to
which you want to send SOS messages.
Repeat
: set the number of times the phone
resends the SOS messages.
Receiving options
: set an alert type for
incoming SOS messages.
Broadcast messages
(Menu 5.7)
The cell broadcast service delivers short
messages on various topics such as the weather
or traffic.
Use this menu to change the settings for the
service and to access broadcast messages.
Read
: open received broadcast messages.
The
Temporary
box saves broadcast
messages until the phone is switched off.
Press <
Options
> and select
Save
when a
text notification appears to save to the
Archive
box.
The
Archive
box saves broadcast messages
indefinitely.
Activation
: select to receive broadcast
messages, or not.
Receiving channels
: indicate the channels
from which you wish to receive broadcast
messages. Please contact your service
provider for further details.
Language
: select the preferred languages
in which broadcast messages display.
Memory status
(Menu 5.8)
Use this menu to view the amount of memory
currently in use in each message folder.
You can also access a message box by selecting
it from this menu.
Menu functions
My files
(Menu 6)
81
My files
(Menu 6)
The
My files
menu allows you to access
images, videos, music files, and sound clips
stored in the phone’s memory.
To access this menu, press <
Menu
> in Idle
mode and select
My files
.
Images
(Menu 6.1)
This menu displays photos you have taken and
images you have downloaded, received in
messages, or imported from a computer.
Viewing an image
1. Select an image folder.
2. Select an image.
Viewing a slide show
You can view your images as a slide show, a
sequential presentation of each image in the
current folder.
1. Select an image folder.
2. Press <
Options
> and select
Slide show
.
3. Select a time interval. The slide show begins.
4. Press <
Back
> to stop the slide show.
Using image options
While viewing an image, press <
Options
> to
access the following options:
List
: return to the image list.
Full screen view
: open the image on a full
screen.
Send via
: send the file via MMS, e-mail, or
Bluetooth.
Set as
: set the image as your wallpaper for
the displays or as a caller ID image for a
Phonebook entry.
As a result of the Digital Rights Management
(DRM) system, some of the media items you
download from the Internet or receive by MMS
may require a licence key to access them.
Menu functions
82
Edit
: edit the image using the Image editor
if it is a photo taken by the camera on the
phone.
p. 50
Move to
: move the file to another folder.
Copy to card
: copy the file to a memory
card.
Delete
: delete the selected file.
Rename
: change the file name.
Slide show
: view all image as a slide show.
Bluetooth visibility
: share the file with
other Bluetooth devices.
Print via
: print the image by connecting the
phone to a printer via USB or Bluetooth.
Lock
/
Unlock
: lock the file to protect it from
being deleted, or unlock the file.
Details
: access the file properties.
Videos
(Menu 6.2)
This menu displays video clips you have
recorded, downloaded, received in messages,
or imported from a computer.
Playing a video clip
1. Select a video folder.
2. Select a video clip.
During playback, use the following keys:
• To print via USB, you first need to set the
USB mode to Pictbridge.
p. 105
• Some printers may not be compatible with
the phone.
Video clips recorded on other devices, such as
camcorders, may not play correctly.
Key Function
Pauses or resumes playback.
Left Returns to the previous file.
Moves backward in a file when
held down.
Menu functions
My files
(Menu 6)
83
After playback, press < > to access the
following options:
Play
: play the selected file.
Send via
: send the selected file via MMS,
e-mail, or Bluetooth.
Move to
: move the file to another folder.
Copy to card
: copy the file to a memory
card.
Delete
: delete the selected file.
Rename
: change the file name.
Bluetooth visibility
: share the selected file
with other Bluetooth devices.
Lock
/
Unlock
: lock the file to protect it from
being deleted, or unlock the file.
Details
: access the file properties.
Music
(Menu 6.3)
This menu displays music files you have
downloaded, or imported from a computer.
1. Select
Music
.
2. Select a file. The music player opens.
p. 47
Sounds
(Menu 6.4)
This menu displays the voice memos you have
recorded, and sound clips you have
downloaded, received in messages, or imported
from a computer.
Right Skips to the next file. Skips
forward in a file when held
down.
Up Opens the file list.
Down Stops playback.
/ Adjusts the volume.
Key Function
Menu functions
84
Playing a sound clip
1. Select a sound folder.
2. Select a sound clip. For a voice memo, see
Voice recorder
.
p. 49
Using sound options
While playing a sound clip, press <
Options
> to
access the following options:
List
: return to the sound list.
Send via
: send the selected file via MMS, e-
mail, or Bluetooth.
Set as
: set the file as your ringtone, as a
ringtone for a Phonebook entry, or as a
ringtone for alarms.
Move to
: move the file to another folder.
Copy to card
: copy the file to a memory
card.
Delete
: delete the file.
Rename
: change the file name.
Bluetooth visibility
: share the currently
selected file or the files you want with other
Bluetooth devices.
Lock
/
Unlock
: lock the file to protect it from
being deleted, or unlock the file.
Details
: access the file properties.
Other files
(Menu 6.5)
Files that you have received but which are not
supported by your phone are stored in this
folder. You cannot open these files on the
phone.
From the file list, press <
Options
> to access
the following options:
Send via
: send the file via MMS, e-mail, or
Bluetooth.
Move to memory card
/
Move to
: move the
file to another folder.
Copy to card
/
Copy to
: copy the file to
another folder.
Menu functions
Planner
(Menu 7)
85
Delete
: delete the selected file or all files.
Rename
: change the file name.
List by
: change the sort order of the file list.
Bluetooth visibility
: share the selected file
or the files you want with other Bluetooth
devices.
Print via
: print the image by connecting the
phone to a printer via USB or Bluetooth.
Lock
/
Unlock
: lock the file to protect it from
being deleted, or unlock the file.
Details
: access the file properties.
Memory card
(Menu 6.6)
Use this menu to access the files stored on a
memory card. This menu is only available when
you insert a memory card into the phone.
Memory status
(Menu 6.7)
You can check the total amount of memory and
the amount of memory currently in use in each
media box.
You can access a media box by selecting it from
this menu.
Planner
(Menu 7)
Use this menu to keep track of your schedule.
You can also use convenient features, such as
an alarm clock, calculator, converter, timer, and
stopwatch.
To access this menu, press <
Menu
> in Idle
mode and select
Planner
.
• To print via USB, you first need to set the
USB mode to Pictbridge.
p. 105
• Some printers may not be compatible with
the phone.
Menu functions
86
Alarm
(Menu 7.1)
Use this menu to set alarms. The alert type for
a normal alarm corresponds to the call alert
type settings. A wake-up alarm is not affected
by your sound settings.
Setting an alarm
1. Select the type of alarm.
2. Set each alarm option.
Alarm
: activate the alarm.
Alarm time
: enter the time for the alarm
to ring.
AM/PM
: select
AM
or
PM
in 12-hour
time format.
Alarm day
: select days of the week to
sound the alarm.
Alarm tone
: select an alarm tone.
3. Press <
Save
>.
Stopping an alarm
For a non-wake-up alarm, press any key.
For a wake-up alarm, press <
OK
> or
[].
Press any key, except for <
OK
> and [ ],
to cause it to sound again after 5 minutes.
You can do this a maximum of 5 times.
Deactivating an alarm
1. Select the alarm you want to deactivate.
2. Select
Off
on the
Alarm
line and press
<
Save
>.
Setting alarms to sound when the
phone is off
From the Alarm screen, select
Auto power-up
On
.
If the phone is off when it is time for the alarm
to sound, the phone switches on and sounds
the alarm.
Menu functions
Planner
(Menu 7)
87
Calendar
(Menu 7.2)
Use this menu to keep track of your schedule.
Selecting a day on the calendar
When you access the
Calendar
menu, the
calendar in Month view appears with today’s
date indicated by a grey box.
Press [Left] or [Right] to move by day.
Press [Up] or [Down] to move by week.
Press [Volume] to move by month.
Creating an item
You can store appointments, anniversaries,
miscellaneous items, and tasks on the calendar.
More than one item per day can be stored.
Entering an appointment or a
miscellaneous item
1. Select a date on the calendar.
2. Press <
Options
> and select
Create
Appointment
or
Miscellany
.
3. Enter information or change the settings:
Subject
: enter a title for the item.
Details
: enter item details.
Start date
and
Start time
: enter the
starting date and time for the item.
AM/PM
: select
AM
or
PM
in 12-hour
time format.
End date
and
End time
: enter the
ending date and time for the item.
AM/PM
: select
AM
or
PM
in 12-hour
time format.
Location
: (for
Appointment
) enter
information about the appointed location.
Alarm
: set an alarm for the item.
before
: set how long before the item the
alarm is to alert you.
Alarm tone
: select an alarm tone.
Repeat
: (for
Appointment
) select to set
the item to recur and select a repeat unit.
until
: (for
Appointment
) set the ending
date, if the item will recur.
Menu functions
88
4. Press <
Save
> to save the item.
Entering an anniversary
1. Select a date on the calendar.
2. Press <
Options
> and select
Create
Anniversary
.
3. Enter information or change the settings:
Occasion
: enter information about the
anniversary.
Date
: enter the date.
Alarm
: set an alarm for the anniversary.
before
: set how long before the
anniversary the alarm is to alert you.
Alarm time
: enter the time for the alarm
to ring.
AM/PM
: select
AM
or
PM
in 12-hour
time format.
Alarm tone
: select an alarm tone.
Repeat every year
: set the phone to
remind you of the anniversary every year.
4. Press <
Save
> to save the anniversary.
Entering a task
1. Select a date on the calendar.
2. Press <
Options
> and select
Create
Task
.
3. Enter information or change the settings:
Task
: enter information about the task.
Start date
: enter the starting date.
Due date
: enter the ending date.
Priority
: select a priority level.
Alarm
: set an alarm for the task.
before
: set how long before the task the
alarm is to alert you.
Alarm time
: enter the time for the alarm
to ring.
AM/PM
: select
AM
or
PM
in 12-hour
time format.
Alarm tone
: select an alarm tone.
4. Press <
Save
> to save the task.
Menu functions
Planner
(Menu 7)
89
Consulting the calendar
Once you have created items, the item icons
and the number of items for a specific day
appears at the bottom of the calendar.
Appointment
Anniversary
• Task
Miscellaneous item
Viewing an item
1. Select a date on the calendar to display the
items for that day.
2. Select an item to view its details.
3. Press [Left] or [Right] to access the other
items scheduled for the selected day.
While viewing an item, press <
Options
> to
access the following options:
Edit
: edit the item.
Create
: add a new item.
Send via
: send the item via SMS, MMS,
e-mail, or Bluetooth.
View by
: change the view mode of the
calendar.
Done
/
Not done
: change the status of the
task item.
Delete
: delete the item.
Print via Bluetooth
: print the item details
by connecting the phone to a printer via
Bluetooth. Some printers may not be
compatible with the phone.
Using calendar options
On the calendar, press <
Options
> to access
the following options:
View by
: change the view mode of the
calendar.
Create
: add a new item.
Go to
: select today’s date or enter a specific
date.
Menu functions
90
Event list
: sort items by type of item.
Delete
: delete items stored on the calendar
by using various deleting options.
Settings
: change the default settings for
the calendar.
Starting day
: select which day of the week
the calendar starts with.
Default view by
: select the default
calendar view mode.
Missed alarm events
: access items whose
alarms you have missed.
Memory status
: access memory
information for the items stored on the
calendar.
Viewing items in a different mode
You can change the calendar display to Day
view or Week view. Press <
Options
> and
select
View by
a view mode.
Day view
You can view items for the selected date. The
following icons may display to indicate the item
status:
• Alarm set
Recurring item
• Completed task
Task priority ( : high, : normal, and
: low)
Select an item to view its details.
Week view
You can view items for the selected week. A cell
on the timetable indicates the presence of item
information. Select a cell in the day you want.
Memo
(Menu 7.3)
Use this menu to create memos about
important things, or check and manage them.
Menu functions
Planner
(Menu 7)
91
Creating a memo
1. Press <
Options
> and select
Create
.
2. Enter memo contents and press [ ].
Viewing memos
1. From the memo list, select a memo.
2. Press [Left] or [Right] to view other memos.
Using memo options
While viewing a memo, press <
Options
> to
access the following options:
Edit
: change the memo contents.
Send via
: send the memo via SMS, MMS,
e-mail, or Bluetooth.
Delete
: delete the memo.
Print via Bluetooth
: print the memo details
by connecting the phone to a printer via
Bluetooth. Some printers may not be
compatible with the phone.
Memory status
: access memory
information for your memos.
World clock
(Menu 7.4)
Use this menu to find out the current time in
another part of the world.
Viewing world time
1. From the world map, press [Left] or [Right]
to scroll to the city you want on the upper or
lower line.
As the time line moves, the time and date of
the given zone display.
2. Press [ ] to save the time zone.
Applying daylight saving time
1. From the world map, press <
Options
> and
select
Apply daylight saving time
.
2. Press [ ] to select the time zones you
want.
3. Press <
Save
>.
Menu functions
92
Calculator
(Menu 7.5)
Use this menu to perform basic arithmetic
functions, such as addition, subtraction,
multiplication, and division.
1. Enter the first number.
Press [ ] to insert a decimal point.
Press [ ] to insert a bracket.
Press [ / ] to move the cursor.
•Press <
Options
> to use additional
arithmetic functions or to switch to the
Converter screen.
2. Press one of the Navigation keys to access
the math function you want.
3. Enter the second number.
4. Press [ ] to view the result.
5. If necessary, repeat from step 2 to continue
the calculation.
Converter
(Menu 7.6)
Use this menu for common conversions, such
as currency and temperature.
Performing a conversion
1. Select a converter.
2. Press [Left] or [Right] to select the original
unit and press [Down].
3. Enter the value to be converted and press
[Down].
Press [ ] to insert a decimal point.
Press [ ] to change the temperature to
above zero (+) or below zero (-).
4. Press [Left] or [Right] to select the unit to
which you want to convert.
The equivalent value for the amount you
entered displays.
Menu functions
Planner
(Menu 7)
93
Using converter options
Press <
Options
> to access the following
options:
Clear
: clear the current values.
Reverse
: reverse the conversion.
Exchange rate
: edit the currency rate list.
Timer
(Menu 7.7)
Use this menu to set a period of time for the
phone to count down. The phone sounds an
alarm when the specified period of time expires.
Starting the timer
1. Press <
Set
>.
2. Enter the length of time you want to count
down and press <
OK
>.
3. Press [ ] to start counting down.
Stopping the timer
Press any key when the timer sounds.
Press [ ] on the Timer screen to stop the
timer before it sounds.
Stopwatch
(Menu 7.8)
Use this menu to measure elapsed time. The
maximum time is 10 hours.
1. Press [ ] to start the stopwatch.
2. Press [ ] to check an interval. You can
repeat this step for a total of 4 intervals.
Menu functions
94
Camera
(Menu 8)
You can use the camera module embedded in
your phone to take photos and record videos.
To access this menu, press <
Menu
> or [Down]
in Idle mode and select
Camera
.
Take photo
(Menu 8.1)
The camera produces JPEG photos.
Taking a photo
1. Access the
Take photo
menu to turn on the
camera.
2. Make any desired adjustments.
Press < > to access camera options.
next section
Use the keypad to change the camera
settings or switch to other modes.
p.
96
3. Press [ ] to take a photo. The photo is
saved in the
My
photos
folder.
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras
are not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
When you take a photo in direct sunlight or in
bright conditions, shadows may appear on the
photo.
4.
To Press
access photo options <
Options
>.
p. 97
delete the photo [
C
] and then
<
Yes
>.
return to Capture mode <
Back
>.
Menu functions
Camera
(Menu 8)
95
Using camera options in Capture mode
In Capture mode, press < > to access the
following options:
Record video
: switch to Record mode.
Shooting mode
: take a photo in the
following modes:
Single shot
: take a photo in Normal mode.
You can select whether or not the camera
automatically saves a photo.
Multi shot
: take a series of action stills. You
can select the number of photos the camera
will take.
Mosaic shot
: take several stills and save
them in one frame. You can select the
layout.
Effects
: change the colour tone or apply a
special effect.
Frames
: apply a decorative frame.
Timer
: set a time delay before the camera
takes a photo.
Go to My photos
: access the
My
photos
folder.
Camera settings
: change the default
settings for taking a photo.
Photo settings
: change the following image
settings:
-
Size
: select an image size.
-
Quality
: select an image quality setting.
-
Viewfinder
mode
: select a preview
screen.
-
Scene program
: set whether or not to use
Night shot mode.
-
Exposure metering
: select a method to
determine the exposure of an image,
based on a specific area of the image.
-
White balance
: adjust the colour balance
of the photo. You can make your photo
appear warmer or cooler.
Menu functions
96
-
ISO
: change the ISO setting, which
controls the sensitivity of your camera. For
low light situations, select a higher ISO
number. The higher the ISO number, the
faster the camera shutter functions and the
more sensitive the camera is to light.
Higher ISO settings may bring some
distortion to an image.
Preferences
: change the following camera
settings:
-
Shutter sound
: select the sound that you
hear when you press the shutter release.
-
Zoom sound
: turn the sound effect for
zooming on or off.
-
Brightness sound
: turn the sound effect
for brightness adjustment on or off.
-
Default name
: change the default prefix
of file names.
Camera shortcuts
: view the functions of
the keys you can use in Capture mode.
Using the keypad in Capture mode
You can use the keypad to customise your
camera settings in Capture mode.
Key Function
Left/Right Adjusts the brightness.
Up/Down Zooms in or out.
Flips the image vertically.
Shows the mirror image.
1
Switches to Record mode.
p.
98
2
Changes the image size.
3
Changes the image quality.
4
Changes the shooting mode.
5
Changes the colour tone or
applies a special effect.
Menu functions
Camera
(Menu 8)
97
Using photo options
After saving a photo, press <
Options
> to
access the following options:
View
: access one of the multi-shot photos.
Send via
: send the file via MMS, e-mail, or
Bluetooth.
Viewfinder
: return to Capture mode.
Set as
: set the photo as your wallpaper for
the displays or as a caller ID image for a
Phonebook entry.
Edit
: edit the image using the Image editor.
p. 50
Delete
: delete the file.
Multi shot delete all
: delete the multi-shot
photos you want.
Rename
: change the file name.
Go to My photos
: access the
My photos
folder.
p. 81
Bluetooth visibility
: share the selected file
or the files you want with other Bluetooth
devices.
Print via
: print the image by connecting the
phone to a printer via USB or Bluetooth.
6
Changes the white balance
setting.
7
Selects a decorative frame.
8
Sets the timer.
0
Goes to the
My photos
folder.
Changes the preview screen.
Key Function
• To print via USB, you first need to set the
USB mode to Pictbridge.
p. 105
• Some printers may not be compatible with
the phone.
Menu functions
98
Lock
/
Unlock
: lock the file to protect it from
being deleted, or unlock the file.
Details
: access the file properties.
Record video
(Menu 8.2)
You can record a video of what is displayed on
the camera screen and save it.
Recording a video
1. Access the
Record video
menu.
2. Make any desired adjustments.
Press < > to access camera options.
next section
Use the keypad to change the camera
settings or switch to other modes.
p.
99
3. Press [ ] to start recording.
4. Press [ ] or < > to stop recording. The
video is automatically saved in the
My video
clips
folder.
Using camera options in Record mode
In Record mode, press < > to access the
following options:
Take photo
: switch to Capture mode.
Effects
: change the colour tone or apply a
special effect.
Timer
: set a time delay before the camera
starts recording a video.
Go to My video clips
: access the
My video
clips
folder.
5.
To Press
play back the video
clip
[].
access video options < >.
p. 100
delete the video [
C
] and then
<
Yes
>.
return to Record mode < >.
Menu functions
Camera
(Menu 8)
99
Camcorder settings
: change the following
settings for recording a video:
Recording mode
: select a video recording
mode.
Select
Limit for
multimedia messages
or
Limit for emails
to record a video suitable
for an MMS message or e-mail. The video
clip is saved in 3GP format.
Select
Normal
to record a video within the
limit of the currently available memory. The
video clip is saved in MP4 format.
Size
: select a frame size.
Quality
: select an image quality setting.
Record audio
: record a video clip with
audio.
White balance
: adjust the colour balance of
the video. You can make your video appear
warmer or cooler.
Zoom sound
: turn the sound effect for
zooming on or off.
Brightness sound
: turn the sound effect
for brightness adjustment on or off.
Default name
: change the default prefix of
file names.
Camcorder shortcuts
: view the functions
of the keys you can use in Record mode.
Using the keypad in Record mode
You can use the keypad to customise your
camera settings in Record mode:
Key Function
Left/Right Adjusts the brightness.
Up/Down Zooms in or out.
Flips the image vertically.
Shows the mirror image.
1
Switches to Capture mode.
p. 94
Menu functions
100
Using video options
After saving a video clip, press < > to access
the following options:
Viewfinder
: return Record mode.
Send via
: send the file via MMS, e-mail, or
Bluetooth.
Delete
: delete the file.
Rename
: change the file name.
Go to My video clips
: access the
My video
clips
folder.
p. 82
Bluetooth visibility
: share the file with
other Bluetooth devices.
Lock
/
Unlock
: lock the file to protect it from
being deleted, or unlock the file.
Details
: access the file properties.
Go to My photos
(Menu 8.3)
Use this menu to access a list of photos you
have taken.
p. 81
2
Changes the frame size.
3
Changes the image quality.
4
Changes the video recording
mode.
5
Changes the colour tone or
applies a special effect.
6
Changes the white balance
setting.
7
Mutes or unmutes the audio.
8
Sets the timer.
0
Goes to the
My video clips
folder.
Key Function
Menu functions
Settings
(Menu 9)
101
Go to My video clips
(Menu 8.4)
Use this menu to access a list of videos you
have recorded.
p. 82
Settings
(Menu 9)
The
Settings
menu provides you with various
setting options to customise the phone to your
preferences and needs. You can also reset the
settings to their default values.
To access this menu, press <
Menu
> in Idle
mode and select
Settings
.
Time and date
(Menu 9.1)
Use this menu to set the current time and date
on your phone.
Home zone
: set the home time zone. Select
the city that corresponds to your home zone.
To set the daylight saving time, select
Set
daylight saving time
.
Time
: enter the current time.
AM/PM
: select
AM
or
PM
in 12-hour time
format.
Time format
: select a time format.
Date
: enter the current date.
Date format
: select a date format.
Auto update
: activate the auto time update
feature. Your phone will read the MCC
(Mobile Country Code) from the network and
automatically update the current time for the
country that you are in when you travel
abroad.
Time information may not be updated when
you move to one time zone to another within
a country.
Menu functions
102
Phone settings
(Menu 9.2)
Many different features of your phone’s system
can be customised to suit your preferences.
Language
(Menu 9.2.1)
Use this menu to select a language for the
display text.
Greeting message
(Menu 9.2.2)
Use this menu to enter the greeting that is
displayed briefly when the phone is switched
on.
Slide settings
(Menu 9.2.3)
Use this menu to set how the phone reacts
when you open it for an incoming call, and
when you close it while using a function.
Up
: set whether a call is automatically
answered when you open your phone.
Down
: set whether or not the phone
maintains the menu you are using when you
close the phone.
Shortcuts
(Menu 9.2.4)
You can use the Navigation keys as shortcuts to
access specific menus directly from Idle mode.
Use this menu to change the shortcut
assignments for [Left] and [Right]. [Up] is fixed
as a shortcut to
My menu
, and [Down] for
Camera
.
Assigning a shortcut menu
1. Select a key to be used as a shortcut key.
2. Select a menu to be assigned to the key.
When you set
Down
to
Continue
operation
, the key lock works only in Idle
mode or after the display turns off.
Menu functions
Settings
(Menu 9)
103
Using shortcut options
Press <
Options
> to access the following
options:
Change
: assign or change a shortcut menu
assignment.
Remove
: deactivate the shortcut
assignment to the selected key.
Remove all
: deactivate all shortcut
assignments.
My menu
(Menu 9.2.5)
You can set up a menu of your own using your
favourite menu items, which can be easily
accessed by pressing [Up] in Idle mode.
Setting up My menu items
1. Select an item to be changed.
2. Select the menu item you want.
Using item options
Press
<
Options
> to access the following
options:
Assign
: assign an item.
Change
: change the selected item.
Remove
: remove the selected item.
Remove all
: remove all items.
Advanced shortcuts
(Menu 9.2.6)
Use this menu to activate the Advanced
shortcut feature, which allows you to access the
text message, alarm, calendar, calculator, and
converter applications from the dialling screen.
Launching menus by number
1. From the
Advanced shortcut
menu, select
On
and press <
Save
>.
Menu functions
104
2. In Idle mode, enter the number for the
action you want.
For example
,
enter time as 4-digit to set an
alarm or date as 4-digits to enter your
schedule.
3. Press one of the Navigation keys.
You can access the following applications by
default:
•Up: Alarm
p. 86
•Down: Converter
p. 92
•Left: SMS
p. 61
Right: Calendar
p. 87
Changing an Advanced shortcut key
1. From the
Advanced shortcut
menu, press
[Down] and select a key to be used as a
shortcut key.
2. Select a menu to be assigned to the key.
Using Advanced shortcut options
Press <
Options
> to access the following
options:
Change
: assign or change a shortcut menu.
Remove
: deactivate the shortcut
assignment to the selected key.
Remove all
: deactivate all shortcut
assignments.
Volume key
(Menu 9.2.7)
Use this menu to change the volume key
settings.
Volume key function
: set whether the
phone mutes the call ringer or rejects a call
if you press and hold [ / ] when a call
comes in. You can also set whether the
phone sends an SMS message to the caller
when a call is rejected.
Text message
: enter a message to be sent
to the caller when a call is rejected.
Menu functions
Settings
(Menu 9)
105
USB settings
(Menu 9.2.8)
Use this menu to select a USB mode to be used
when you connect your phone to a PC or printer
via USB.
Modem
: you can use your phone as a
modem for PC network connections.
Mass storage
: you can access a memory
card from your PC. This option is only
available when you insert a memory card
into the phone.
Pictbridge
: you can connect your phone to
a PictBridge-compatible printer to directly
print images stored in your phone
Extra settings
(Menu 9.2.9)
You can turn the automatic redialling or
answering features on or off.
Auto redial
: set the phone to make up to
ten attempts to redial a phone number after
an unsuccessful call.
Anykey
answer
: answer an incoming call
by pressing any key, except for <
Reject
>
and [ ].
Voice clarity
: remove extraneous noise and
increase call quality so that the person with
whom you are speaking can hear you clearly
even if you are in a noisy place.
Offline mode
(Menu 9.2.10)
Use this menu to switch the phone to Offline
mode or back to Online mode.
Display settings
(Menu 9.3)
Use this menu to change settings for the display
and light.
Wallpaper
(Menu 9.3.1)
You can change the background image that is
displayed on each display.
Menu functions
106
Main display
: select a background image in
Idle mode.
Menu background
: set whether or not to
display the same background image in Menu
mode.
Transparency
: adjust the transparency of
the menu background image.
Main menu style
(Menu 9.3.2)
You can select a display style for the main menu
screen.
Text display
(Menu 9.3.3)
You can change the display settings for the text
displayed on the idle screen.
Text position
: select a position. If you do
not want text to display in Idle mode, select
Off
.
Text style
: select a font style.
Text colour
: select a font colour.
Skin
(Menu 9.3.4)
You can select a skin colour pattern for Menu
mode.
Brightness
(Menu 9.3.5)
You can adjust the brightness of the display for
varying lighting conditions.
Dialling display
(Menu 9.3.6)
Use this menu to select a font size and colour
for the numbers entered and the background
colour of the display while dialling.
Calendar
(Menu 9.3.7)
Use this menu to display the calendar of the
current month on the idle screen.
Show caller ID
(Menu 9.3.8)
Use this menu to set the phone to display
missed call notifications with the most recently
missed caller’s information.
Menu functions
Settings
(Menu 9)
107
Sound settings
(Menu 9.4)
Use this menu to customise various sound
settings.
Incoming call
(Menu 9.4.1)
Use this menu to select a volume level and alert
type for incoming calls.
Alert type
: specify how you are to be
informed of incoming calls.
Ring tone
: select a ringtone for the call
ringer.
Volume
: select a ringtone volume.
Keypad tone
(Menu 9.4.2)
Use this menu to select the tone that the phone
sounds when you press a key.
Message tone
(Menu 9.4.3)
Use this menu to set up the ringtone for
incoming messages and e-mails.
Tone
: select one of the several message
tones.
Alert type
: specify how you are informed
when a message comes in.
Repetition
: specify how often the phone
informs you of a new message.
Power-on/off tone
(Menu 9.4.4)
Use this menu to select the melody that the
phone sounds when it is switched on or off.
Slide tone
(Menu 9.4.5)
Use this menu to select the tone that the phone
sounds when you open or close the phone.
You can adjust the key tone volume using [
/
]
in Idle mode.
Menu functions
108
Silent mode
(Menu 9.4.6)
Use this menu to set how the phone acts to
alert you to a specific event in Silent mode.
Extra tones
(Menu 9.4.7)
Use this menu to customise additional tones for
the phone.
Minute
minder
: set the phone to beep
every minute during an outgoing call to keep
you informed of the length of your call.
Connection
tone
: set the phone to beep
when an outgoing call is connected to the
system.
Alerts on call
: set the phone to beep when
you receive a new message or when the time
for an alarm comes during a call.
Indicative
tone
: set the phone to beep
when a pop-up window displays.
Light settings
(Menu 9.5)
Use this menu to change settings for light.
Backlight time
(Menu 9.5.1)
You can select the length of time the backlight
or display stays on when the phone is not used.
On
: select the length of time the backlight
stays on.
Dim
: select the length of time the display
stays on in Dim mode after the backlight
turns off. After a specified time, the display
turns off.
Keypad light
(Menu 9.5.2)
Use this menu to set how the phone controls
the use of the keypad light.
Any time
: the keypad light is always used.
Night time
: the keypad light is used only
between 5:00 PM and 9:00 AM.
Menu functions
Settings
(Menu 9)
109
Custom time
: you can specify the time
period that the keypad light is used.
Network services
(Menu 9.6)
Use this menu to access network services.
Please contact your service provider to check
their availability and subscribe to them, if you
wish.
Call diverting
(Menu 9.6.1)
This network service reroutes incoming calls to
a phone number that you specify.
1. Select a call diverting option:
Divert always
: divert calls.
Busy
: divert calls when you are on
another call.
No
reply
: divert calls when you do not
answer the phone.
Unreachable
: divert calls when you are
not in your service area or when your
phone is switched off.
Cancel
all
: cancel all call diverting
options.
2. Select the type of calls to be diverted.
3. Select
Activate
. To deactivate call diverting,
select
Deactivate
.
4. Move to the
Divert to
line.
5. Enter the number to which calls are to be
diverted and press <
OK
>.
6. If you selected
No reply
, move to the
Sec
line and select the length of time the
network delays before diverting a call.
Call barring
(Menu 9.6.2)
This network service allows you to restrict your
calls.
1. Select a call barring option:
All
outgoing
: prohibit outgoing calls.
International
: prohibit international
calls.
Menu functions
110
International
except
home
: only allow
calls to numbers within the current
country when you are abroad, and to your
home country.
All
incoming
: prohibit incoming calls.
Incoming
while
abroad
: prohibit
incoming calls when you use your phone
outside of your home service area.
Cancel
all
: cancel all call barring
settings, allowing to be sent and received
normally.
Change barring password
: change the
call barring password obtained from your
service provider.
2. Select the type of calls to be barred.
3. Select
Activate
. To deactivate call barring,
select
Deactivate
.
4. Enter the call barring password supplied by
your service provider and press <
OK
>.
Call waiting
(Menu 9.6.3)
This network service informs you when
someone is trying to reach you while you are on
another call.
1. Select the type of calls to which the call
waiting option will apply.
2. Select
Activate
. To deactivate call waiting,
select
Deactivate
.
Network selection
(Menu 9.6.4)
This network service allows you to manually
select the network to be used while roaming
outside of your home area, or to let the network
be chosen automatically.
You can select a network other than your home
network only if there is a valid roaming
agreement between the two.
Menu functions
Settings
(Menu 9)
111
Caller ID
(Menu 9.6.5)
This network service allows you to hide your
phone number from the person you are calling.
However, some networks do not allow the user
to change this setting. If you select
Default
,
the phone will use the default setting provided
by the network.
Voice mail server
(Menu 9.6.6)
Use this menu to store the number of the
voicemail server and access your voicemails.
Connect to voice server
: connect to the
voicemail server to allow you to listen to
your messages.
Voice server number
: enter the voicemail
server number.
Band selection
(Menu 9.6.7)
For the phone to make and receive phone calls,
it must register with an available network.
Your phone can handle any of the following
types of networks: Combined GSM 900/1800,
GSM 1900, and GSM 900/1800/1900.
The country where you purchased your phone
determines the default band that it uses. When
you travel abroad, you must remember to
change to an appropriate band.
Security
(Menu 9.7)
Use this menu to protect the phone against
unauthorised use by managing the several
access codes of your phone and SIM card.
You must store the voicemail server number
before accessing the server. Your service
provider can give you the number.
If you enter an incorrect PIN/PIN2 three times,
the SIM card is blocked. To unblock it, you need
to enter your PUK/PUK2 (Personal Unblocking
Key). The codes are supplied by your network
operator.
112
PIN check
(Menu 9.7.1)
The 4- to 8-digit PIN (Personal Identification
Number) protects your SIM card against
unauthorised use. When this feature is enabled,
the phone requires your PIN each time it is
switched on.
Change PIN
(Menu 9.7.2)
Use this menu to change your PIN. The PIN
check feature must be enabled to use this
feature.
Phone lock
(Menu 9.7.3)
The Phone lock feature locks the phone from
unauthorised use.
When this feature is enabled, you must enter a
4- to 8-digit phone password each time the
phone is switched on.
The password is preset to
00000000
. To
change the password, use the
Change
password
menu.
Change password
(Menu 9.7.4)
Use this menu to change your phone password.
Privacy
(Menu 9.7.5)
Use this menu to lock access to call logs,
messages, or files. When a privacy options
enabled, you must enter the phone password to
access the locked items or functions.
SIM lock
(Menu 9.7.6)
The SIM lock feature allows your phone to work
only with the current SIM by assigning a SIM
lock code. You must enter the SIM lock code to
use a different SIM card.
FDN mode
(Menu 9.7.7)
If supported by your SIM card, Fixed Dialling
Number (FDN) mode restricts your outgoing
calls to a limited set of phone numbers. When
this feature is enabled, you can make calls only
to phone numbers stored on the SIM card.
Menu functions
Settings
(Menu 9)
113
Change PIN2
(Menu 9.7.8)
If supported by your SIM card, the Change PIN2
feature changes your current PIN2.
Mobile tracker
(Menu 9.7.9)
When someone tries to use your phone with
another SIM card, the phone will automatically
send the preset tracking message to your
family or friends. You can check the phone
number from which the messages are sent and
then track your phone. This feature is useful
when the phone is stolen or lost.
1. Enter the phone password and press <
OK
>.
2. Specify the following options:
Mobile tracker
: activate or deactivate
the Mobile tracker feature.
Press
<
Accept
> if you agree to the terms and
conditions of service listed on the screen.
Recipients
: specify phone numbers to
which you want to send the tracking
messages.
Sender
: enter the sender’s name.
Message
: check the preset tracking
message text.
3. When you have finished, press <
Save
>
4. Press <
Accept
> if you agree to the terms
and conditions of service listed on the screen
Memory status
(Menu 9.8)
Use this menu to check the amount of memory
being used for storing data in Messages, My
files, Calendar, Phonebook, and JAVA world. You
can also view the amount of shared memory.
Sending of the tracking message will be billed to
the user of the unauthorised SIM card. To use
your phone with any other SIM card, you must
first deactivate the Mobile Tracker feature.
Menu functions
114
Reset settings
(Menu 9.9)
Use this menu to reset the phone’s settings you
have changed.
1. Press [ ] to select the setting categories
to be reset.
2. Press <
Reset
>.
3. Press <
Yes
> to confirm the reset.
4. Enter the phone password and press <
OK
>.
Key management
(Menu 9.10)
Use this menu to manage the licence keys you
have acquired to activate media files locked by
DRM systems.
Press <O
ptions
> to access the following
options:
View
: open the corresponding item.
Delete
: delete the selected licence key.
Go to My Messages
: access the message
that contains the media file.
Go to My Items
: access the corresponding
file folder.
The password is preset to
00000000
. You
can change this password.
p. 112
115
Solve problems
Help and personal needs
To save the time and expense of an
unnecessary service call, perform the simple
checks in this section before contacting a
service professional.
When you switch on your phone, the
following messages may appear:
“Insert SIM”
Be sure that the SIM card is correctly
installed.
“Phone lock”
The automatic locking function has been
enabled. You must enter the phone’s
password before you can use the phone.
“Enter PIN”
You are using your phone for the first time.
You must enter the PIN supplied with the
SIM card.
The PIN check feature is enabled. Every time
the phone is switched on, the PIN has to be
entered. To disable this feature, use the
PIN
check
menu.
“Enter PUK”
The PIN code has been entered incorrectly
three times, and the SIM card is now
blocked. Enter the PUK supplied by your
service provider.
“No network,” “Network unavailable,” or
“No service” displays
The network connection has been lost. You
may be in a weak signal area. Move and try
again.
You are trying to access an option for which
you have no subscription with your service
provider. Contact the service provider for
further details.
Solve problems
116
You have entered a number but it was not
dialled
Be sure that you have pressed [ ].
Be sure that you have accessed the right
cellular network.
Be sure that you have not set an outgoing
call barring option.
Your correspondent cannot reach you
Be sure that your phone is switched on.
([ ] pressed for more than one second.)
Be sure that you have accessed the right
cellular network.
Be sure that you have not set an incoming
call barring option.
Your correspondent cannot hear you
speaking
Be sure that you have switched on the
microphone.
Be sure that you are holding the phone close
enough to your mouth. The microphone is
located at the bottom of the phone.
The phone starts beeping and “Battery
low” flashes on the display
Your battery is insufficiently charged.
Recharge the battery.
The audio quality of the call is poor
Check the signal strength indicator on the
display ( ). The number of bars indicates
the signal strength from strong ( ) to
weak ( ).
Try moving the phone slightly or moving
closer to a window if you are in a building.
No number is dialled when you re-call a
Phonebook entry
•Use the
Contact list
menu to ensure the
number has been stored correctly.
Important Safety
Precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving; park the
vehicle first.
Switching Off When Refueling
Do not use the phone at a refueling point (service
station) or near fuels or chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using them
in aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special Regulations
Meet any special regulations in force in any area and
always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
IImmppoorrttaanntt SSaaffeettyy PPrreeccaauuttiioonnss
Sensible Use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency Call
Ensure the phone is switched on and in service.
Key in the emergency number for your present
location, then press <SEND>. If certain feature are in
use, deactivate those features before you can make
an emergency call. Give all the necessary information
as accurately as possible. Do not cut off the call until
given permission to do so.
Water Resistance
Your phone is not water-resistance. Keep it dry.
Accessories and Batteries
Use only Samsung-approved accessories and
batteries.
Qualified Service
Only qualified service personnel may install or repair
your phone.
For more detailed safety information, see
“Health and Safety Information” on page 114.
safety-pre-Astyle 1/27/03 1:57 PM Page 2
22
Health and safety information
Health and safety information
Exposure to radio frequency (RF) signals
Your wireless phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications
Commission (FCC) of the U.S. Government. These
limits are part of comprehensive guidelines and
establish permitted levels of RF energy for the general
population. The guidelines are based on the safety
standards that were developed by independent
scientific organizations through periodic and through
evaluation of scientific studies.
The standards include a substantial safety margin
designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless phones employs a
unit of measurement known as Specific Absorption
Rate (SAR). The SAR limit recommended by the FCC is
1.6W/kg.
*
23
SAR tests are conducted using standard operating
positions specified by the FCC with the phone
transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power levels
so as to use only the power required to reach the
network. In general, the closer you are to a wireless
base station antenna, the lower the power output of
the phone.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that
it does not exceed the limit established by the
government adopted requirement for safe exposure.
The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by
the FCC for each model. While there may be
differences between the SAR levels of various phones
and at various positions, they all meet the government
requirement.
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this model phone is on
file with the FCC and can be found under the Display
Grant section of http://www.fcc.gov/oet/fccid after
searching on FCC ID printed in the label on the phone.
For body operation
For body worn operation, this model phone has been
tested and meets the FCC RF exposure guidelines
when used with a Samsung-supplied or approved
accessory designated for this product or when used
with and accessory that contains no metal and that
positions the handset a minimum from the body.
* In the U.S. and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged
over one gram of tissue. The standard incorporates a
substantial margin of safety to give additional
protection for the public and to account for any
variations in measurements.
24
Health and safety information
The minimum distance for this model phone is written
in the FCC certification information from the body.
None compliance with the above conditions may
violate FCC RF exposure guidelines.
For more Information concerning exposure to radio
frequency signals, see the following websites:
Federal Communications Commission (FCC)
http://www.fcc.gov
Cellular Telecommunications Industry Association
(CTIA):
http://www.wow-com.com
U.S.Food and Drug Administration (FDA)
http://www.fda.gov/cdrh/consumer
World Health Organization (WHO)
http://www.who.int/peh-emf/en
Precautions when using batteries
Never use any charger or battery that is damaged
in any way.
Use the battery only for its intended purpose.
If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
Battery charging time depends on the remaining
battery charge, the type of battery and the charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time
to buy a new battery.
If left unused, a fully charged battery will
discharge itself over time.
Use only Samsung-approved batteries and
recharge your battery only with Samsung-
approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than a
week, since overcharging may shorten its life.
Health and safety information
25
Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and lifetime of the battery.
Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between the
+ and – terminals of the battery (metal strips on
the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the
terminals may damage the battery or the object
causing the short-circuiting.
Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
Road safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime.
But an important responsibility accompanies the
benefits of wireless phones, one that every user must
uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
Get to know your wireless phone and its features,
such as speed dial and redial. If available, these
features help you to place your call without taking
your attention off the road.
When available, use a hands-free device. If
possible, add an extra layer of convenience and
safety to your wireless phone with one of the many
hands-free accessories available today.
26
Health and safety information
Position your wireless phone within easy reach. Be
able to access your wireless phone without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your
voice mail answer it for you.
Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain,
sleet, snow, ice, and even heavy traffic can be
hazardous.
Do not take notes or look up phone numbers while
driving. Jotting down a To Do list or flipping
through your Address Book takes your attention
away from your primary responsibility, driving
safely.
Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car
will be stationary. If you need to make a call while
moving, dial only a few numbers, check the road
and your mirrors, then continue.
Do not engage in stressful or emotional
conversations that may be distracting. Make the
people with whom you are talking aware that you
are driving and suspend conversations that have
the potential to divert your attention from the
road.
Use your wireless phone to call for help. Dial the
emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it is
a free call on your wireless phone!
Use your wireless phone to help others in
emergencies. If you see a car accident, crime in
progress or other serious emergency where lives
are in danger, call the emergency number, as you
would want others to do for you.
If you see a broken-down vehicle posing no serious
hazard, a broken traffic signal, a minor traffic
accident where no one appears injured, or a
vehicle you know to be stolen, call roadside
assistance or any other special non-emergency
wireless number.
Health and safety information
27
Operating environment
Remember to follow any special regulations in force in
any area and always switch off your phone whenever it
is forbidden to use it, or when it may cause
interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation of
the equipment and for the safety of personnel, it is
recommended that the equipment should only be used
in the normal operating position (held to your ear with
the antenna pointing over your shoulder).
Electronic devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against the
RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be maintained
between a wireless phone and a pacemaker to avoid
potential interference with the pacemaker. These
recommendations are consistent with the independent
research and recommendations of Wireless Technology
Research.
Persons with pacemakers:
should always keep the phone more than 15 cm (6
inches) from their pacemaker when the phone is
switched on.
should not carry the phone in a breast pocket.
should use the ear opposite the pacemaker to
minimize potential interference.
If you have any reason to suspect that interference is
taking place, switch off your phone immediately.
Hearing aids
28
Health and safety information
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you
may wish to consult your hearing aid manufacturer to
discuss alternatives.
Other medical devices
If you use any other personal medical devices, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information. Switch off your phone in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to
external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consult the manufacturer of any equipment that has
been added to your vehicle. You should also consult
the manufacturer of any equipment that has been
added to your vehicle.
Posted facilities
Switch off your phone in any facility where posted
notices require you to do so.
Potentially explosive environments
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Users are advised to switch off the phone while at a
refueling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants or where blasting operations
are in progress.
Health and safety information
29
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include the
areas below deck on boats, chemical transfer or
storage facilities, vehicles using liquefied petroleum
gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or
metal powders, and any other area where you would
normally be advised to turn off your vehicle engine.
Emergency calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well as
user-programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should
never rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not be
possible on all wireless phone networks or when
certain network services and/or phone features are in
use. Check with local service providers.
To make an emergency call:
If the phone is not on, switch it on.
1. Key in the emergency number for your present
location (for example, 911 or other official
emergency number). Emergency numbers vary by
location.
2. Press
SEND key
.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular service
provider.
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not end
the call until given permission to do so.
FCC Notice and Cautions
FCC Notice
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and,if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment
and receiver.
-Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV
technician for help
Cautions
Changes or modifications made in the radio phone, not
expressly approved by Samsung, will void the user's
authority to operate the equipment.
30
Health and safety information
Other important safety information
Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty installation
or service may be dangerous and may invalidate
any warranty applicable to the device.
Check regularly that all wireless phone equipment
in your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as
the phone, its parts or accessories.
For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
Switch off your phone before boarding an aircraft.
The use of wireless phones in aircraft is illegal and
may be dangerous to the aircraft’s operation.
Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
Care and maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years:
Keep the phone and all its parts and accessories out of
the reach of small children’s.
Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode electronic
circuits.
Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
Do not use or store the phone in dusty, dirty areas,
as its moving parts may be damaged.
Health and safety information
31
Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the phone,
which may damage the phone’s electronic circuit
boards.
Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with
a soft cloth slightly dampened in a mild soap-and-
water solution.
Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
Use only the supplied or an approved replacement
antenna. Unauthorized antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
32
Health and safety information
Acknowledging special precautions
and the FCC and industry canada
notice
Cautions
Modifications not expressly approved by the party
responsible for compliance could void the user's authority
to operate the equipment.
FCC Compliance information
This device complies with Part 15 of FCC Rules. Operation
is subject to the following two conditions:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received.
Including interference that may cause undesired
operation.
Information to user
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV
technician for help.
Health and safety information
33
Appendix A: CERTIFICATION
INFORMATION (SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on safety
standards that were developed by independent scientific
organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR limit set by the FCC is 1.6
W/kg. SAR Tests are conducted using standard operating
positions accepted by the FCC with the phone transmitting
at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone
while operating can be well below the maximum value.
This is because the phone is designed to operate at
multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power
output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the limit established by the government
adopted requirement for safe exposure. The tests are
performed in positions and locations(e.g., at the ear and
worn on the body) as required by the FCC for each model.
The highest SAR values of this model phone as reported to
FCC are Head: 0.483W/kg, Body-worn: 0.539W/kg in GSM1900
Body-worn operations are restricted to Samsung-supplied,
approved or none Samsung designated accessories that
have no metal and must provide at least 1.5cm separation
between the device, including its antenna whether
extended or retracted, and the user’s body. None
compliance to the above restrictions may violate FCC RF
exposure guidelines.
34
Health and safety information
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of http:/
/www.fcc.gov/oet/fccid after searching on FCC ID
A3LSGHE250
In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kilogram (W/kg)
averaged over one gram of tissue. The standard
incorporates a substantial ma gin of safety to give
additional protection for the public and to account for any
variations in measurements.
Appendix B: Guide to safe and
responsible wireless phone use
Cellular Telecommunications & Internet Association
“Safety is the most important call you will ever make.
A guide to safe and responsible wireless phone
use
TENS OF MILLIONS OF PEOPLE IN THE U.S. TODAY TAKE
ADVANTAGE OF THE UNIQUE COMBINATION OF
CONVENIENCE, SAFETY AND VALUE DELIVERED BY THE
WIRELESS TELEPHONE. QUITE SIMPLY, THE WIRELESS
PHONE GIVES PEOPLE THE POWERFUL ABILITY TO
COMMUNICATE BY VOICE-ALMOST ANYWHERE, ANYTIME-
WITH THE BOSS, WITH A CLIENT, WITH THE KIDS, WITH
EMERGENCY PERSONNEL OR EVEN WITH THE POLICE.
EACH YEAR, AMERICANS MAKE BILLIONS OF CALLS FROM
THEIR WIRELESS PHONES, AND THE NUMBERS ARE
RAPIDLY GROWING.
But an important responsibility accompanies those
benefits, one that every wireless phone user must uphold.
When driving a car, driving is your first responsibility. A
wireless phone can be an invaluable tool, but good
Health and safety information
35
judgment must be exercised at all times while driving a
motor vehicle whether on the phone or not.
The basic lessons are ones we all learned as teenagers.
Driving requires alertness, caution and courtesy. It
requires a heavy dose of basic common sense-keep your
head up, keep your eyes on the road, check your mirrors
frequently and watch out for other drivers.
It requires obeying all traffic signs and signals and staying
within the speed limit. It means using seat belts and
requiring other passengers to do the same.
But with wireless phone use, driving safely means a little
more. This brochure is a call to wireless phone users
everywhere to make safety their first priority when behind
the wheel of a car. Wireless telecommunications is keeping
us in touch, simplifying our lives, protecting us in
emergencies and providing opportunities to help others in
need. When it comes to the use of wireless phones, safety
is your most important call.
Wireless phone “Safety Tips”
Below are safety tips to follow while driving and using a
wireless phone which should be easy to remember:
1.
Get to know your wireless phone and its features such
as speed dial and redial. Carefully read your
instruction manual and learn to take advantage of
valuable features most phones offer, including
automatic redial and memory. Also, work to memorize
the phone keypad so you can use the speed dial
function without taking your attention off the road.
2.
When available, use a hands free device. A number of
hands free wireless phone accessories are readily
available today. Whether you choose an installed
mounted device for your wireless phone or a speaker
phone accessory, take advantage of these devices if
available to you.
3.
Position your wireless phone within easy reach. Make
sure you place your wireless phone within easy reach
and where you can grab it without removing your eyes
from the road. If you get an incoming call at an
inconvenient time, if possible, let your voice mail
answer it for you.
4.
Suspend conversations during hazardous driving
conditions or situations. Let the person you are
speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather
conditions. Rain, sleet, snow and ice can be
36
Health and safety information
hazardous, but so is heavy traffic. As a driver, your
first responsibility is to pay attention to the road.
5.
Do not take notes or look up phone numbers while
driving. If you are reading an address book or
business card, or writing a “to do” list while driving a
car, you are not watching where you are going. It’s
common sense. Don’t get caught in a dangerous
situation because you are reading or writing and not
paying attention to the road or nearby vehicles.
6.
Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan your calls before you begin your trip
or attempt to coincide your calls with times you may
be stopped at a stop sign, red light or otherwise
stationary. But if you need to dial while driving, follow
this simple tip-dial only a few numbers, check the road
and your mirrors, then continue.
7.
Do not engage in stressful or emotional conversations
that may be distracting. Stressful or emotional
conversations and driving do not mix-they are
distracting and even dangerous when you are behind
the wheel of a car. Make people you are talking with
aware you are driving and if necessary, suspend
conversations which have the potential to divert your
attention from the road.
8.
Use your wireless phone to call for help. Your wireless
phone is one of the greatest tools you can own to
protect yourself and your family in dangerous
situations-with your phone at your side, help is only
three numbers away. Dial 9-1-1 or other local
emergency number in the case of fire, traffic accident,
road hazard or medical emergency. Remember, it is a
free call on your wireless phone!
9.
Use your wireless phone to help others in
emergencies. Your wireless phone provides you a
perfect opportunity to be a “Good Samaritan” in your
community. If you see an auto accident, crime in
progress or other serious emergency where lives are
in danger, call 9-1-1 or other local emergency number,
as you would want others to do for you.
10.
Call roadside assistance or a special wireless non
emergency assistance number when necessary.
Certain situations you encounter while driving may
require attention, but are not urgent enough to merit a
call for emergency services. But you still can use your
wireless phone to lend a hand. If you see a broken-
down vehicle posing no serious hazard, a broken traffic
signal, a minor traffic accident where no one appears
injured or a vehicle you know to be stolen, call
Health and safety information
37
roadside assistance or other special non-emergency
wireless number.
Careless, distracted individuals and people driving
irresponsibly represent a hazard to everyone on the road.
Since 1984, the Cellular Telecommunications Industry
Association and the wireless industry have conducted
educational outreach to inform wireless phone users of
their responsibilities as safe drivers and good citizens. As
we approach a new century, more and more of us will take
advantage of the benefits of wireless telephones.
And, as we take to the roads, we all have a responsibility
to drive safely.
“The wireless industry reminds you to use your phone
safely when driving.
Cellular Telecommunications & Internet Association For
more information, please call 1-888-901-SAFE.
For updates: http://www.wow-com.com/consumer/issues/
driving/articles.cfm?ID =85
Appendix C: consumer update
on wireless phones
U.S. Food and Drug Administration
1.
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called cell, mobile, or
PCS phones. These types of wireless phones can expose
the user to measurable radio frequency energy (RF)
because of the short distance between the phone and the
user s head. These RF exposures are limited by Federal
Communications Commission safety guidelines that were
developed with the advice of FDA and other federal health
and safety agencies. When the phone is located at greater
distances from the user, the exposure to RF is drastically
lower because a person’s RF exposure decreases rapidly
with increasing distance from the source. The so-called
“cordless phones,” which have a base unit connected to
the telephone wiring in a house, typically operate at far
lower power levels, and thus produce RF exposures well
within the FCC’s compliance limits.
2.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any
health problems are associated with using wireless
phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of
radio frequency energy (RF) in the microwave range while
38
Health and safety information
being used. They also emit very low levels of RF when in
the stand-by mode. Whereas high levels of RF can produce
health effects (by heating tissue), exposure to low level RF
that does not produce heating effects causes no known
adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some
studies have suggested that some biological effects may
occur, but such findings have not been confirmed by
additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
3.
What is FDAs role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiation
emitting consumer products such as wireless phones
before they can be sold, as it does with new drugs or
medical devices. However, the agency has authority to
take action if wireless phones are shown to emit radio
frequency energy (RF) at a level that is hazardous to the
user. In such a case, FDA could require the manufacturers
of wireless phones to notify users of the health hazard and
to repair, replace or recall the phones so that the hazard
no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
Support needed research into possible biological
effects of RF of the type emitted by wireless phones;
Design wireless phones in a way that minimizes any
RF exposure to the user that is not necessary for
device function; and
Cooperate in providing users of wireless phones with
the best possible information on possible effects of
wireless phone use on human health
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
National Institute for Occupational Safety and Health
Environmental Protection Agency Federal
Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information
Administration
Health and safety information
39
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless phones
with the Federal Communications Commission (FCC). All
phones that are sold in the United States must comply
with FCC safety guidelines that limit RF exposure. FCC
relies on FDA and other health agencies for safety
questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than
those they can get from wireless phones. Base stations
are thus not the primary subject of the safety questions
discussed in this document.
4.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program
and with groups of investigators around the world to
ensure that high priority animal studies are conducted to
address important questions about the effects of exposure
to radio frequency energy (RF).
FDA has been a leading participant in the World Health
Organization International Electromagnetic Fields (EMF)
Project since its inception in 1996. An influential result of
this work has been the development of a detailed agenda
of research needs that has driven the establishment of
new research programs around the world. The Project has
also helped develop a series of public information
documents on EMF issues.
FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research
and Development Agreement (CRADA) to do research on
wireless phone safety. FDA provides the scientific
oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone users.
The CRADA will also include a broad assessment of
additional research needs in the context of the latest
research developments around the world.
5.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
40
Health and safety information
If there is a risk from these products—and at this point we
do not know that there is—it is probably very small. But if
you are concerned about avoiding even potential risks,
you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is a
key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone
will reduce RF exposure.
If you must conduct extended conversations by wireless
phone every day, you could place more distance between
your body and the source of the RF, since the exposure
level drops off dramatically with distance. For example,
you could use a headset and carry the wireless phone
away from your body or use a wireless phone connected to
a remote antenna
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like
those described above to reduce your RF exposure from
wireless phone use.
6.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you
want to take steps to lower exposure to radio frequency
energy (RF), the measures described above would apply
to children and teenagers using wireless phones. Reducing
the time of wireless phone use and increasing the distance
between the user and the RF source will reduce RF
exposure.
Some groups sponsored by other national governments
have advised that children be discouraged from using
wireless phones at all. For example, the government in the
United Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly precautionary;
it was not based on scientific evidence that any health
hazard exists.
7.
Do hands-free kits for wireless phones reduce risks
from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free kits
can be used with wireless phones for convenience and
comfort. These systems reduce the absorption of RF
Health and safety information
41
energy in the head because the phone, which is the source
of the RF emissions, will not be placed against the head.
On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part
of the body will absorb more RF energy. Wireless phones
marketed in the U.S. are required to meet safety
requirements regardless of whether they are used against
the head or against the body. Either configuration should
result in compliance with the safety limit.
8.
Do wireless phone accessories that claim to shield the
head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that accessories that claim to shield the head from
those emissions reduce risks. Some products that claim to
shield the user from RF absorption use special phone
cases, while others involve nothing more than a metallic
accessory attached to the phone. Studies have shown that
these products generally do not work as advertised. Unlike
“hand-free” kits, these so-called “shields” may interfere
with proper operation of the phone. The phone may be
forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal
trade Commission (FTC) charged two companies that sold
devices that claimed to protect wireless phone users from
radiation with making false and unsubstantiated claims.
According to FTC, these defendants lacked a reasonable
basis to substantiate their claim.
9.
What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason, FDA
helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones.
This test method is now part of a standard sponsored by
the Association for the Advancement of Medical
instrumentation (AAMI). The final draft, a joint effort by
FDA, medical device manufacturers, and many other
groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers
and defibrillators are safe from wireless phone EMI.
FDA has tested hearing aids for interference from
handheld wireless phones and helped develop a voluntary
standard sponsored by the Institute of Electrical and
Electronic Engineers (IEEE). This standard specifies test
42
Health and safety information
methods and performance requirements for hearing aids
and wireless phones so that no interference occurs when a
person uses a compatible phone and a compatible hearing
aid at the same time. This standard was approved by the
IEEE in 2000.
FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmful interference be found to occur, FDA will conduct
testing to assess the interference and work to resolve the
problem.
10.
What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in their
research methods. Animal experiments investigating the
effects of radio frequency energy (RF) exposures
characteristic of wireless phones have yielded conflicting
results that often cannot be repeated in other laboratories.
A few animal studies, however, have suggested that low
levels of RF could accelerate the development of cancer in
laboratory animals. However, many of the studies that
showed increased tumor development used animals that
had been genetically engineered or treated with cancer
causing chemicals so as to be pre-disposed to develop
cancer in the absence of RF exposure. Other studies
exposed the animals to RF for up to 22 hours per day.
These conditions are not similar to the conditions under
which people use wireless phones, so we don t know with
certainty what the results of such studies mean for human
health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use of
wireless phones and primary brain cancer, gioma,
meningioma, or acoustic neuroma, tumors of the brain or
salivary gland, leukemia, or other cancers. None of the
studies demonstrated the existence of any harmful health
effects from wireless phone RF exposures. However, none
of the studies can answer questions about long-term
exposures, since the average period of phone use in these
studies was around three years.
11.
What research is needed to decide whether RF
exposure from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological
studies of people actually using wireless phones would
provide some of the data that are needed. Lifetime animal
exposure studies could be completed in a few years.
Health and safety information
43
However, very large numbers of animals would be needed
to provide reliable proof of a cancer promoting effect if
one exists. Epidemiological studies can provide data that
is directly applicable to human populations, but 10 or
more years follow-up may be needed to provide answers
about some health effects, such as cancer. This is because
the interval between the time of exposure to a cancer-
causing agent and the time tumors develop - if they do -
may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in
measuring actual RF exposure during day-to-day use of
wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which
model of phone is used.
12.
Which other federal agencies have responsibilities
related to potential RF health effects?
Additional information on the safety of RF exposures from
various sources can be obtained from the following
organizations.
FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
Occupational Safety and Health Administration’s (OSHA):
http://www.osha-slc.gov/SLTC/radiofrequencyradiation/
index.html
National Institute for Occupational Safety and Health
(NIOSH):
http://www.cdc.gov/niosh/emfpg.html
World health Organization (WHO):
http://www.who.int/peh-emf/
International Commission on Non-Ionizing Radiation
Protection:
http://www.icnirp.de
National Radiation Protection Board (UK):
http://www.nrpb.org.uk
Updated 4/3/2002: US Food and Drug Administration
http://www.fda.gov/cellphones
44
Health and safety information
STANDARD LIMITED WARRANTY
What is Covered and For How Long?
SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P. (SAMSUNG)
warrants to the original purchaser ("Purchaser") that
SAMSUNG’s Phones and accessories ("Products") are free
from defects in material and workmanship under normal
use and service for the period commencing upon the date
of purchase and continuing for the following specified
period of time after that date:
Phone 1 Year
Batteries 1 Year
Leather Case/Pouch 90 Days
Other Phone Accessories 1 Year
What is Not Covered?
This Limited Warranty is
conditioned upon proper use of Product by Purchaser. This
Limited Warranty does not cover: (a) defects or damage
resulting from accident, misuse, abuse, neglect, unusual
physical, electrical or electromechanical stress, or
modification of any part of Product, including antenna, or
cosmetic damage; (b) equipment that has the serial
number removed or made illegible; (c) any plastic
surfaces or other externally exposed parts that are
scratched or damaged due to normal use; (d)
malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/
peripheral equipment not furnished or approved by
SAMSUNG; (e) defects or damage from improper testing,
operation, maintenance, installation, or adjustment; (f)
installation, maintenance, and service of Product, or (g)
Product used or purchased outside the United States or
Canada.
This Limited Warranty covers batteries only if battery
capacity falls below 80% of rated capacity or the battery
leaks, and this Limited Warranty does not cover any
battery if (i) the battery has been charged by a battery
charger not specified or approved by SAMSUNG for
charging the battery, (ii) any of the seals on the battery
are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the
SAMSUNG phone for which it is specified.
What are SAMSUNG’s Obligations?
During the
applicable warranty period, SAMSUNG will repair or
replace, at SAMSUNG’s sole option, without charge to
Purchaser, any defective component part of Product. To
Health and safety information
45
obtain service under this Limited Warranty, Purchaser
must return Product to an authorized phone service facility
in an adequate container for shipping, accompanied by
Purchaser’s sales receipt or comparable substitute proof of
sale showing the date of purchase, the serial number of
Product and the sellers’ name and address. To obtain
assistance on where to deliver the Product, call Samsung
Customer Care at 1-888-987-4357. Upon receipt,
SAMSUNG will promptly repair or replace the defective
Product. SAMSUNG may, at SAMSUNG’s sole option, use
rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather
cases and pouches will be warranted for a period of ninety
(90) days. All other repaired/replaced Product will be
warranted for a period equal to the remainder of the
original Limited Warranty on the original Product or for 90
days, whichever is longer. All replaced parts, components,
boards and equipment shall become the property of
SAMSUNG.
If SAMSUNG determines that any Product is not covered
by this Limited Warranty, Purchaser must pay all parts,
shipping, and labor charges for the repair or return of such
Product.
What Are the Limits On SAMSUNG’s Liability?
EXCEPT
AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT “AS IS,” AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO:
THE MERCHANTABILITY OF THE PRODUCT OR ITS
FITNESS FOR ANY PARTICULAR PURPOSE OR USE;
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF
THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE
COMPONENTS CONTAINED THEREIN; OR
COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL
SHALL BE CONSTRUED TO CREATE AN EXPRESS
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT. ALL IMPLIED WARRANTIES AND
46
Health and safety information
CONDITIONS THAT MAY ARISE BY OPERATION OF LAW,
INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION
OF TIME AS THE EXPRESS WRITTEN WARRANTY STATED
HEREIN. SOME STATES/PROVINCES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO
YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR
ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY
FROM THE USE OR LOSS OF USE OF THE PRODUCT OR
FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS
OR BENEFITS, OR FOR DAMAGES ARISING FROM ANY
TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE)
OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS OR
EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY
OTHER PARTY. SOME STATES/PROVINCES DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE.
THIS
LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE
OTHER THAN THE ORIGINAL PURCHASER OF THIS
PRODUCT AND STATES PURCHASER’S EXCLUSIVE
REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY
IS HELD ILLEGAL OR UNENFORCEABLE BY REASON OF
ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED
WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND
WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS
TERMS OR AS LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY
USE THIRD-PARTY SOFTWARE OR EQUIPMENT IN
CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, AS TO THE QUALITY, CAPABILITIES,
OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY
Health and safety information
47
THIRD-PARTY SOFTWARE OR EQUIPMENT, WHETHER
SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT IS
INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH
THE PRODUCT.
THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-
PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE
PURCHASER AND THE DIRECT VENDOR, OWNER OR
SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG’s
Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited Warranty.
The agents, employees, distributors, and dealers of
SAMSUNG are not authorized to make modifications to
this Limited Warranty, or make additional warranties
binding on SAMSUNG. Accordingly, additional statements
such as dealer advertising or presentation, whether oral or
written, do not constitute warranties by SAMSUNG and
should not be relied upon.
Samsung Telecommunications America (STA), Inc.
1301 East Lookout Drive
Richardson, TX 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2005 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior
written approval.
Specifications and availability subject to change without
notice. [080802]
126
Index
A
ABC mode, text input • 29
Alarm • 86
Answering
call • 33
second call • 34
Anykey answer • 105
Auto redial • 105
B
Background image • 105
Backlight, set
display • 108
keypad • 108
Band selection • 111
Barring, calls • 109
Battery
charging • 7
low indicator • 8
precautions • 118
Bluetooth
receiving, data • 54
sending, data • 53
settings • 51
Broadcast messages • 80
Browser, web • 57
C
Calculator92
Call costs • 39
Call log
dialled • 38
missed • 38
received • 38
Call time • 38
Caller groups • 43
Caller ID • 111
Calls
answering • 33
barring • 109
diverting • 109
holding • 34
making • 32
redialling • 32
rejecting • 33
waiting • 110
Camera
photos • 94
videos • 98
CB (Cell Broadcast) messages •
80
Characters, enter • 29
Configuration messages • 68
Connection tone • 108
Converter • 92
Creating messages
e-mail • 64
MMS • 62
SMS • 61
Index
127
D
Date, set • 101
Deleting
call log • 38
e-mail • 71, 72
items • 89, 90
MMS • 67, 68, 72
phonebook • 45
SMS • 66, 68, 72
Dialled calls • 38
Dialling display, set • 106
Display
brightness • 106
icons • 11, 12
language • 102
layout • 11
settings • 105
Diverting, calls • 109
Document files • 84
DTMF tones, send • 35
E
E-mails
creating/sending • 64
deleting • 71
setting • 76
viewing • 70
Emergency calls • 122
F
FDN (Fixed Dialling Number)
mode • 112
File manager • 81
FM radio • 55
G
Games • 50, 54
Greeting message • 102
H
Health and safety • 117
Holding, call • 34
I
Image editor • 50
Images, downloaded • 81
Inbox, messages
e-mail • 70
MMS/SMS • 66
International calls • 32
Internet • 57
K
Key management • 114
Key tones
selecting • 107
sending/muting • 35
volume • 107
L
Language, select • 102
Last number, redial • 32
Light settings • 108
Locking
menu functions • 112
phone • 112
128
Index
SIM card • 112
Low battery indicator • 8
M
Memo • 90
Memory status
file manager • 85
messages • 80
phone • 113
phonebook • 45
Message tone • 107
Messages
cell broadcast • 80
configuration • 68
e-mail • 64
greeting • 102
MMS • 62
push • 67
SMS • 61
Minute minder • 108
Missed calls • 38
MMS messages
creating/sending • 62
deleting • 67
setting • 73
viewing • 66
Mobile tracker • 113
Multiparty-call • 36
Music player • 46
Music, downloaded • 83
N
Name card • 44
Names
entering • 29
searching • 40
Network band, select • 111
Network selection • 110
Network services • 108
Numbers
searching • 40
storing • 41
O
Offline mode • 9, 105
Outbox, messages • 68
P
Password
call barring • 110
phone • 112
Phone
care and maintenance •
124
display • 11
icons • 11
locking • 112
password • 112
resetting • 114
switching on/off • 9
unpacking • 6
Phonebook
adding • 41
deleting • 45
editing • 40
finding • 40
managing • 45
options • 40
speed dialling • 43
Index
129
Photos
editing • 50
taking • 94
viewing • 81
PIN, change • 112
PIN2, change • 113
Power on/off tone • 107
Privacy • 112
Push messages • 67, 79
Q
Quiet mode
switching • 15
R
Received calls • 38
Received messages
e-mail • 70
MMS/SMS • 66
Recording
videos • 98
voice memos • 49
Redialling
automatically • 105
manually • 32
Resetting phone • 114
Ringer
incoming calls • 107
messages • 107
Road safety • 120
Roaming • 110
S
Safety
information • 117
Security, calls • 111
Sent messages • 69
Shortcut • 102
Silent mode
setting • 108
SIM card
inserting • 7
locking • 112
Skin colour • 106
Slide tone • 107
SMS messages
creating/sending • 61
deleting • 66
setting • 73
viewing • 66
Sound settings • 107
Sounds, downloaded • 83
Speakerphone • 35
Speed dial • 43
Stopwatch • 93
Switching on/off
microphone • 35
phone • 9
T
T9 mode, text input • 30
Templates, message • 71
Text, enter • 29
Time, set • 101
Timer • 93
130
Index
U
USB settings • 105
V
Videos
playing • 82
recording • 98
Voice recorder
playing • 49
recording • 49
Voicemail server • 111
W
Waiting call • 110
Wallpaper • 105
Web browser
access • 57
bookmarks • 59
World clock • 91

Navigation menu