Samsung Electronics Co SGHE317 Dual-Band GSM Phone User Manual E317
Samsung Electronics Co Ltd Dual-Band GSM Phone E317
Users Manual
DUAL BAND GPRS Series
SGH-e317
Portable Digital Telephone
User Manual
Please read this manual before operating your phone,
and keep it for future reference.
Printed in Korea
Code No.: GH68-xxxxxA
English.03/2004. Rev. 1.0
Draft version
(05. 26)
Intellectual Property
All Intellectual Property, as defined below, owned by or which is
otherwise the property of Samsung or its respective suppliers
relating to the SAMSUNG Phone, including but not limited to,
accessories, parts, or software relating thereto (the “Phone
System”), is proprietary to Samsung and protected under
federal laws, state laws, and international treaty provisions.
Intellectual Property includes, but is not limited to, inventions
(patentable or unpatentable), patents, trade secrets,
copyrights, software, computer programs, and related
documentation and other works of authorship. You may not
infringe or otherwise violate the rights secured by the
Intellectual Property. Moreover, you agree that you will not (and
will not attempt to) modify, prepare derivative works of, reverse
engineer, decompile, disassemble, or otherwise attempt to
create source code from the software. No title to or ownership
in the Intellectual Property is transferred to you. All applicable
rights of the Intellectual Property shall remain with SAMSUNG
and its suppliers.
Samsung Telecommunications America,
L.P.
U.S. Headquarters:
1301 East Lookout Drive
Richardson, Texas 75082
Tel: 972-761-7000
Fax: 972-761-7001
Customer Care Center:
1601 E. Plano Parkway
Suite 150
Plano, TX 75047
Tel: 888-987-HELP (4357)
Fax: 972-761-7501
Internet Address: http://www.samsungusa.com/
wireless
©2004 Samsung Telecommunications America. All rights
reserved. No reproduction in whole or in part allowed without
prior written approval. Samsung is a registered trademark of
Samsung Electronics America, Inc. and its related entities.
1
Table of Contents
Important Safety Precautions .........................7
Unpacking .......................................................9
Your Phone ...................................................10
Phone Layout .........................................................10
Display..................................................................13
Service Light ..........................................................16
Camera .................................................................16
Getting Started .............................................17
Installing the SIM Card ............................................17
Charging a Battery..................................................19
Switching the Phone On/Off......................................21
Call Functions ...............................................23
Making a Call..........................................................23
Adjusting the Volume ..............................................25
Answering a Call.....................................................26
Viewing Missed Calls................................................27
Quickly Switching to Silent Mode...............................29
Selecting Functions and Options ...................31
Phone Book ..................................................33
Storing a Number with a Name .................................33
Using Phone Book Entry Options ...............................36
Searching for and Dialing Number in Phone Book ........37
Editing a Caller Group..............................................39
Speed-dialing .........................................................40
Deleting All of the Phone Book Entries........................42
Checking the Memory Status ....................................43
Using the Service Dialing Numbers............................43
2
Entering Text ................................................45
Changing the Text Input Mode..................................46
Using T9 Mode........................................................47
Using Alphabet Mode...............................................49
Using Number Mode ................................................50
Using Symbol Mode.................................................50
Options During a Call ....................................51
Putting a Call on Hold ..............................................51
Switching the Microphone Off (Mute) .........................52
Muting/Sending Key Tones.......................................53
Searching for a Number in Phone Book ......................53
Using the Message Service (SMS)..............................54
Call Waiting............................................................54
Making a Multi-party Call..........................................55
Using the Menus ...........................................57
Accessing a Menu Function by Scrolling......................57
Using Shortcuts ......................................................58
List of Menu Functions .............................................58
Text Messages ..............................................65
Inbox
(Menu 1.1)
....................................................65
Outbox
(Menu 1.2)
..................................................67
Write New
(Menu 1.3)
.............................................68
Templates
(Menu 1.4)
.............................................70
Settings
(Menu 1.5)
................................................71
Delete All
(Menu 1.6)
..............................................72
Memory Status
(Menu 1.7)
.......................................73
Voice Mail
(Menu 1.8)
..............................................73
Broadcast
(Menu 1.9)
..............................................74
Multimedia Messages ....................................75
Inbox
(Menu 2.1)
....................................................75
Outbox
(Menu 2.2)
..................................................78
Shop MMS
(Menu 2.3)
.............................................79
Draft
(Menu 2.4)
.....................................................79
3
Write New
(Menu 2.5)
.............................................80
Templates
(Menu 2.6)
.............................................83
Delete All
(Menu 2.7)
..............................................84
Memory Status
(Menu 2.8)
.......................................84
Setup
(Menu 2.9)
....................................................85
MMS Profile
(Menu 2.10)
..........................................86
E-Mail ...........................................................87
Inbox
(Menu 3.1)
...................................................87
Outbox
(Menu 3.2)
..................................................89
Draft
(Menu 3.3)
.....................................................90
Write New
(Menu 3.4)
.............................................90
Templates
(Menu 3.5)
.............................................92
Delete All
(Menu 3.6)
..............................................93
Memory Status
(Menu 3.7)
.......................................94
Setup
(Menu 3.8)
....................................................94
Email-Profile
(Menu 3.9)
..........................................95
Call Records ..................................................97
Missed Calls
(Menu 4.1)
...........................................97
Incoming Calls
(Menu 4.2)
.......................................97
Outgoing Calls
(Menu 4.3)
........................................98
Delete All
(Menu 4.4)
..............................................98
Call Time
(Menu 4.5)
...............................................99
Call Cost
(Menu 4.6)
...............................................99
Camera .......................................................101
Take Photos
(Menu 5.1)
.........................................101
My Photos
(Menu 5.2)
............................................105
Record Videos
(Menu 5.3)
......................................106
My Videos
(Menu 5.4)
............................................107
Delete All
(Menu 5.5)
............................................108
Memory Status
(Menu 5.6)
.....................................108
Sound Settings ...........................................109
Ring Tone
(Menu 6.1)
............................................109
Ring Volume
(Menu 6.2)
........................................109
4
Shop Ringtones
(Menu 6.3)
.................................... 110
Alert Type
(Menu 6.4)
............................................ 110
Keypad Tone
(Menu 6.5)
........................................ 110
Message Tone
(Menu 6.6)
...................................... 111
Folder Tone
(Menu 6.7)
......................................... 112
Power On/Off
(Menu 6.8)
....................................... 112
Extra Tones
(Menu 6.9)
......................................... 112
Phone Settings ...........................................115
Display Settings
(Menu 7.1)
................................... 115
Greeting Message
(Menu 7.2)
................................. 117
Own Number
(Menu 7.3)
........................................ 117
Language
(Menu 7.4)
............................................ 118
Security
(Menu 7.5)
.............................................. 118
Extra Settings
(Menu 7.6)
...................................... 121
Short Cut
(Menu 7.7)
............................................ 122
TTY Setting
(Menu 7.8)
.......................................... 122
Reset Settings
(Menu 7.9)
...................................... 123
Organizer ....................................................125
Alarm
(Menu 8.1)
..................................................125
Calendar
(Menu 8.2)
............................................. 127
Time & Date
(Menu 8.3)
......................................... 129
Calculator
(Menu 8.4)
............................................ 131
To Do List
(Menu 8.5)
............................................ 131
Voice Memo
(Menu 8.6)
......................................... 133
Currency Exchange
(Menu 8.7)
............................... 136
Network Services ........................................137
Call Forwarding
(Menu 9.1)
.................................... 137
Call Barring
(Menu 9.2)
.......................................... 138
Call Waiting
(Menu 9.3)
......................................... 140
Network Selection
(Menu 9.4)
................................. 141
Caller ID
(Menu 9.5)
.............................................. 142
Closed User Group (CUG)
(Menu 9.6)
...................... 142
5
Funbox .......................................................145
WAP Browser
(Menu 10.1)
......................................145
Shop Games
(Menu 10.2)
......................................151
Games
(Menu 10.3)
..............................................151
Sounds
(Menu 10.4)
...............................................154
Images
(Menu 10.5)
...............................................154
Delete All
(Menu 10.6)
...........................................155
Memory Status
(Menu 10.7)
...................................155
Solving Problems ........................................156
Access Codes ..............................................159
Phone Password....................................................159
PIN .....................................................................160
PUK.....................................................................160
PIN2 ...................................................................161
PUK2................................................................... 161
Health and Safety Information ...................162
Exposure to Radio Frequency (RF) Signals................ 162
For Body Operation ............................................... 164
Precautions When Using Batteries ........................... 165
Road Safety .........................................................166
Operating Environment.......................................... 168
Electronic Devices ................................................. 168
Potentially Explosive Environments.......................... 170
Emergency Calls ...................................................171
Other Important Safety Information ........................ 172
Care and Maintenance ...........................................173
Acknowledging Special Precautions and
the FCC and Industry Canada Notice........................ 174
Appendix A: CERTIFICATION INFORMATION (SAR).... 176
Appendix B: Guide to Safe and Responsible
Wireless Phone Use ............................................... 178
Appendix C: Consumer Update on Wireless Phones....182
6
STANDARD LIMITED WARRANTY ................191
Glossary .....................................................196
Index ..........................................................201
Important Safety Precautions
7
Important Safety Precautions
Read these guidelines before using your wireless phone.
Failure to comply with them may be dangerous or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving; park the vehicle
first.
Switching Off When Refuelling
Do not use the phone at a refuelling point (service station) or
near fuels or chemicals.
Switching Off in an Aircraft
Wireless phones can cause interference. Using them in an
aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch your phone off near medical equipment. Follow any
regulations or rules in force.
Interference
All wireless phones may be subject to interference, which
could affect their performance.
Special Regulations
Meet any special regulations in force in any area and always
switch off your phone whenever it is forbidden to use it, or
when it may cause interference or danger (in a hospital for
example).
Important Safety Precautions
8
Sensible Use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone is
switched on.
Emergency Call
Ensure the phone is switched on and in service. Key in the
emergency number for your present location, then press the
key. You must deactivate any unnecessary features
before you can make an emergency call. Give all the
necessary information as accurately as possible. Do not cut
off the call until given permission to do so.
Water Resistance
Your phone is not water-resistant. Keep it dry.
Accessories and Batteries
Use only Samsung-approved accessories and batteries. Use of
any unauthorized accessories could damage your phone and
may be dangerous.
Qualified Service
Only qualified service personnel may repair your phone.
For more detailed safety information, see “Health and Safety
Information” on page 162.
CAUTION
RISK OF EXPLOSION IF A BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
Unpacking
9
Unpacking
Your package contains the following items:
Your local Samsung dealer can provide you with additional
accessories including:
●
Standard battery
●
TTY adapter
●
Simple handsfree car kit
●
Car holder
●
Cigarette lighter adapter
●
Ear microphone
●
Travel adapter
●
Battery charger
●
Hand strap
●
Data kit
Handset Travel Adapter
Battery User Guide
Hand Strap
Your Phone
10
Your Phone
Phone Layout
The following illustrations show the main elements of your
phone:
Earpiece
Display
Soft key (right)
WAP Browser key
Alphanumeric keys
Soft key (left)
Dial/menu
confirmation key
Microphone
Cancel/
correction key
Navigation (Up/Down/
Left/Right) keys
Volume/menu
browse keys
Special
function keys
Power on/off/
menu exit key
Camera key
Your Phone
11
Key
(s)
Description
In Menu mode, scroll through the menus and Phone
Book.
In Idle mode, the Up key allows you to quickly access
the Camera menu and the Down key allows you to
access your favorite menus directly. For more
information about shortcuts, see page 58.
In Menu mode, the Left key returns to the previous
menu level and the Right key selects the current
menu.
When entering text, move the cursor left and right
respectively.
In Idle mode, allows you to access your favorite
menus directly. For more information about
shortcuts, see page 58.
(soft keys)
Perform the functions indicated by the text above
them, on the bottom line of the display.
In Idle mode, launches the WAP (Wireless Application
Protocol) browser.
Camera Camera key
Headset jack Antenna
Service light
External display
Your Phone
12
Makes or answers a call.
When held down in Idle mode, recalls the most recent
number dialed or received.
In Menu mode, selects a menu function or stores
information that you have entered, such as a name in
the phone or SIM memory.
Deletes characters from the display.
In Menu mode, returns to the previous menu level.
Ends a call. Also switches the phone on and off when
held down.
In Menu mode, cancels your input and returns to Idle
mode.
When held down in Idle mode, accesses your voice
mail.
Enter numbers, letters and some special characters.
Enter special characters.
Perform various functions.
(on the right side of the phone)
Turns on the camera when held down to allow you to
take photos.
In Capture mode, works as a camera shutter.
Key
(s)
Description
(Continued)
Your Phone
13
Display
Display Layout
The display has three areas:
(on the left side of the phone)
During a call, adjust the earpiece volume.
In Idle mode with the phone open, adjust the keypad
tone volume. With the phone closed, turn on the
external display when held down.
In Menu mode, scroll through the menus and Phone
Book.
Area Description
First line Displays various icons. See page 14.
Middle lines Displays messages, instructions, and any
information that you enter, such as the number
you are dialing.
Last line Shows the functions currently assigned to the
two soft keys.
Key
(s)
Description
(Continued)
Icons
Text and graphic area
Soft key indicators
Menu Name
Your Phone
14
Icons
Icon Description
Shows the received signal strength. The greater the
number of bars, the better the signal.
Appears when you are connected to the GPRS network.
Appears when a call is in progress.
Appears when you are out of your service area. When
it displays, you cannot make or receive a call.
Appears when you are out of your home area and have
logged on a different network; for example, when
traveling on other countries.
Appears when you set an alarm to ring at a specified
time.
Appears when you are entering text to indicate the
current text input mode.
Appears when a new text message is received.
Appears when a new multimedia message is received.
Appears when a new voice mail message is received.
Appears when Mute mode is active.
Appears when Silent mode is active or you set the
Alert Type
menu (
Menu 6.4
), so that the phone
vibrates when you receive a call. For further details,
see page 29 and page 110 respectively.
Your Phone
15
Backlight
A backlight illuminates the display and the keypad. When you
press any key or open the phone, the backlight turns on. It
turns off when no keys are pressed within a given period of
time, depending on your setting in the
Back Light
menu
(
Menu 7.1.5
). After one minute, the display turns off to
conserve your battery power.
To specify the length of time the backlight is active, set the
Back Light
menu (
Menu 7.1.5
). See page 116 for further
details.
External Display
Your phone has an external display on the front of the phone.
It indicates when you have an incoming call or message. It
also alerts you at the specified time when you have set an
alarm by displaying the corresponding icon.
When you close the phone, the display shows the current time
on a digital clock. You can set the display color using the
Front LCD
menu
(Menu 7.1.2)
. For details, see page 116.
With the phone closed, you can take photos using the
external display by pressing and holding the Camera key on
the right side of the phone. See page 104.
Shows the level of your battery. The more bars you
see, the more power you have left.
Icon Description
(Continued)
Your Phone
16
Service Light
The service light is on the front of the phone. It flashes when
services are available on the phone.
To activate or deactivate the use of the service light, set the
Service Light
menu (
Menu 7.1.6
). See page 116 for further
details.
Camera
The camera module on the front of your phone allows you to
take a picture or record a video while on the move.
For further details about the Camera feature, see page 101.
Service light
Getting Started
17
Getting Started
Installing the SIM Card
When you subscribe to a cellular network, you are provided
with a plug-in SIM card loaded with your subscription details,
such as your PIN, any optional services available and many
others.
Important!
The plug-in SIM card and its contacts can be
easily damaged by scratches or bending, so be
careful when handling, inserting or removing the
card.
Keep all SIM cards out of the reach of small
children.
1. If necessary, switch off the phone by holding down the
key until the power-off image displays.
2. Remove the battery. To do so:
➀
Press and hold the battery lock above the battery
upward toward the top of the phone.
➁
Lift the battery away, as shown.
➁
➀
Getting Started
18
3. Slide the SIM card into the SIM card socket so that it locks
the card into place. Make sure the gold contacts of the
card face into the phone.
Note:
When you need to remove the SIM card, slide it, as shown, and
take it out of the socket.
4. Place the battery so that the tabs on the end align with the
slots at the bottom of the phone.
Getting Started
19
5. Press the battery until it clicks into place. Make sure that
the battery is properly installed before switching the
phone on.
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. A
travel adapter comes with your phone for charging the
battery. Use only approved batteries and chargers. Ask your
local Samsung dealer for further details.
You can use the phone while the battery is charging, but this
causes the phone to charge more slowly.
Note:
You must fully charge the battery before using your phone for
the first time. A discharged battery is fully recharged in
approximately 200 minutes.
1. With the battery in position on the phone, plug the
connector of the travel adapter into the jack at the bottom
of the phone.
Getting Started
20
2. Plug the adapter into a standard AC wall outlet.
3. When charging is finished, unplug the adapter from the
power outlet and disconnect it from the phone by pressing
the buttons on both sides of the connector and pulling the
connector out.
Note:
You must unplug the adapter before you remove the battery
from the phone during charging; otherwise, the phone could be
damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time
remain, a warning tone sounds and the “Warning Low
Battery” message repeats at regular intervals on the display.
When this happens, your phone turns off the backlight to
conserve the remaining battery power.
When the battery level gets too low, the phone automatically
turns off.
Getting Started
21
Switching the Phone On/Off
1. Open the phone.
2. Press and hold the key until the phone switches on.
3. If the phone asks you to enter the phone password, enter
the password and press the
OK
soft key. The phone
password is preset to “00000000” at the factory. For
further details, see page 159.
4. If the phone asks for a PIN, enter the PIN and press the
OK
soft key. For further details, see page 160.
The phone searches for your network and after finding it,
the idle screen, illustrated below, appears on the display.
Now, you can make or receive a call.
Note:
The display language is preset to English at the factory. To
change the language, use the
Language
menu (
Menu 7.4
).
For further details, see page 118.
5. When you wish to switch the phone off, press and hold the
key until the power-off image displays.
Service Provider
05:17 AM
Tue Mar 30
Menu
Name
Getting Started
22 Call Functions
23
Call Functions
Making a Call
When the idle screen displays, enter the area code and phone
number, and press the key.
Note:
When you activate the
Auto Redial
option in the
Extra
Settings
menu (
Menu 7.6
), the phone automatically redials up
to ten times when the person does not answer the call or is
already on the phone. See page 121 for further details.
Making an International Call
1. Press and hold the
0
key.
The
+
character appears.
2. Enter the country code, area code, and phone number and
press the key.
Correcting the Number
To clear Press the
the last digit
displayed
C
key
any other digit in
the number Left or Right key until the cursor is
immediately to the right of the digit to be
cleared. Press the
C
key. You can also
insert a missing digit simply by pressing
the appropriate key.
the whole display
C
key and hold it for more than one
second.
Call Functions
24
Ending a Call
When you want to finish your call, briefly press the key.
Redialing the most recent Number
The phone stores the numbers you dialed, received or missed
if the caller is identified. See “Call Records” on page 97 for
further details.
To recall any of these numbers:
1. If you have typed characters on the display, press the
key to return to Idle mode.
2. Press the key to display a list of the most recent
numbers in the order you made or received.
3. Use the Up and Down keys to scroll through the numbers
until the number you want highlights.
4.
T
o Press the
dial the number key.
edit the number
Options
soft key and select
Edit
. Then
change the number, referring to
“Correcting the Number” on page 23.
delete the number
Options
soft key and select
Delete
.
delete all of the
numbers
Options
soft key and select
Delete
All
. When a confirmation message
displays, press the
Yes
soft key.
Call Functions
25
Making a Call from Phone Book
You can store frequently phone numbers that you use
regularly in the SIM card or the phone’s memory, which are
collectively called Phone Book. Simply select a name to recall
the associated number. For further details about the Phone
Book features, see page 33.
Adjusting the Volume
During a call, if you want to adjust the earpiece volume, use
the Volume keys on the left side of the phone.
Press the key to increase the volume level and the key
to decrease the level.
In Idle mode, you can also adjust the keypad tone volume
using these keys.
Call Functions
26
Answering a Call
When somebody calls you, the phone rings and displays the
incoming call image.
When the caller can be identified, the caller’s phone number,
or name if stored in your Phone Book, displays.
1. If necessary, open the phone. Press the key or the
Accept
soft key to answer the incoming call.
If the
Anykey Answer
option in the
Extra Settings
menu (
Menu 7.6
) is activated, you can press any key to
answer a call except for the key and the
Reject
soft
key. See page 121.
If the
Open to Answer
option in the
Extra Settings
menu (
Menu 7.6
) is activated, you can answer the call
simply by opening the phone.
Note
: To reject an incoming call, press and hold the Volume keys
on the left side of the phone before opening the phone, or
press the
Reject
soft key or key.
2. End the call by closing the phone or pressing the key.
Note:
You can answer a call while using the Phone Book or menu
features. After ending the call, the phone returns to the function
screen you were using.
Call Functions
27
Viewing Missed Calls
When you are unable to answer a call for any reason, you can
find out who is calling you, if this service is available, so that
you can call the person back.
The number of calls you missed displays on the idle screen
immediately after a call is missed.
To view the missed call immediately:
1. If the phone is closed, open the phone.
2. Press the
View
soft key.
The number corresponding to the most recent missed call
displays, if available.
Editing a Missed Call Number
Note:
When the number corresponding to the missed call is not
available, the
Edit Number
option does not display.
1. Press the
Options
soft key.
2. Press the Up or Down key to highlight the
Edit Number
option.
3. Press the
Select
soft key.
3.
To Press the
scroll through the missed calls Up or Down key.
call the number displayed key.
edit or delete a missed call
number
Select
soft key. See below.
Call Functions
28
4. Change the number.
Deleting a Missed Call
1. Press the
Options
soft key.
2. If necessary, press the Up or Down key to highlight the
Delete
option.
3. Press the
Select
soft key.
You can press the key at any time to exit the Missed Call
feature.
Note:
You can access the Missed Call feature at any time by selecting
the
Missed Calls
menu (
Menu 4.1
). For further details, see
page 97.
5.
To Press the
call the number key.
store the number
Save
soft key and enter the name and
location. For further details, see
page 33.
Call Functions
29
Quickly Switching to Silent Mode
Silent mode is convenient when you wish to stop the phone
from making noise, in a theater for example.
In Idle mode, press and hold the key until the “Silent
Mode” message and the Vibration icon ( ) display.
When you exit Silent mode, your phone changes the sound
settings as follows:
To exit and reactivate the previous sound settings, press and
hold the key again until “Exit Silent Mode” appears. The
Vibration icon ( ) no longer displays.
Notes:
• When you turn off the phone, Silent mode is automatically
deactivated.
• Activating Silent mode will not turn off the camera shutter sound.
Option New Setting
Alert type (
Menu 6.4
)Vibration
Keypad tone (
Menu 6.5
)Off
Message tone (
Menu 6.6
) Light only
Folder tone (
Menu 6.7
)Off
Power on/off Off
Extra tones (
Menu 6.9
)Off
Call Functions
30 Selecting Functions and Options
31
Selecting Functions and
Options
Your phone offers a set of functions that allow you to
customize your phone. These functions are arranged in menus
and sub-menus, accessed using the two soft keys marked
and . Each menu and sub-menu allows you to view and
alter the settings of a particular function.
The roles of the soft keys vary according to the function you
are currently using; the labels on the bottom line of the
display just above each key indicates its current role.
Menu Name
Service Provider
05:17 AM
Tue Mar 30
Press the left soft key
for Menu mode. Press the right soft key
for Phone Book.
Selecting Functions and Options
32
To view the various functions and options available and to
select the one you want:
1. Press the appropriate soft key.
In some functions, you may be asked for a password or PIN.
Enter the code and press the
OK
soft key.
Note:
When you access a list of options, your phone highlights the
current option. If, however, there are only two options, such as
On
/
Off
or
Enable
/
Disable
, your phone highlights the option
that is not currently active so that you can select it directly.
2.
To Press the
select the:
• function displayed
• option highlighted
Select
soft key or
the Right key.
view the next function or
highlight the next option on a
list
Down key or key on
the left side of the phone.
move back to the previous
function or option on a list Up key or key on the
left side of the phone.
move back up one level in the
structure Left key, soft key or
C
key.
exit the structure without
changing the settings key.
Phone Book
33
Phone Book
You can store phone numbers and their corresponding names
in your SIM card and phone’s memories. They are physically
separate but are used as a single entity, called Phone Book.
Storing a Number with a Name
There are two ways to store a number:
●
Using the
Save
soft key in Idle mode
●
Using the
New Entry
option in the Phone Book menu
Storing a Number in Idle Mode
When you enter a number,
Save
appears above the left soft
key to allow you to store the number in Phone Book.
1. Enter the number you want to store.
Note:
If you make a mistake while entering a number, correct it
using the
C
key.
2. To save the number, press the
Save
soft key.
3. Select an icon to identify the category of the number to be
stored. Three categories are available:
• : Mobile phone number
• : Office number
• : Home number
To select the category, press the Left or Right key and
press the
Select
soft key.
Phone Book
34
4. Select a memory location, either
SIM Memory
or
Phone
Memory
, by pressing the Up or Down key and press the
Select
soft key.
Note:
When you change phones, any numbers stored in your SIM
card memory are automatically available with the new
phone, whereas any numbers stored in the phone’s
memory must be reentered.
5. Enter a name and press the
OK
soft key.
For further details about how to enter characters, see
page 45.
6. If you do not want to save the number and name in the
suggested location, press the
C
key to clear the location
number and enter another location by pressing the
number keys.
7. Press the
OK
soft key to store the name and number. The
new Phone Book entry displays.
8.
To Press the
use the entry options
Options
soft key. For further
details, see page 36.
return to the idle screen key.
Phone Book
35
Storing a Number Using the Phone Book Menu
1. When the idle screen displays, press the
Name
soft key.
2. Scroll to
New Entry
by pressing the Up or Down key and
press the
Select
soft key.
3. Select an icon to identify the category of the number to be
stored by pressing the Left or Right key, and press the
Select
soft key.
Note:
The E-mail icon ( ) is available in this step. It allows you
to save an E-mail address instead of a phone number.
4. Select a memory location, either
SIM Memory
or
Phone
Memory
, by pressing the Up or Down key and press the
Select
soft key.
Note:
When you are saving an e-mail address, SIM Memory is not
available.
5. Enter a name and press the
OK
soft key.
For further details about how to enter characters, see
page 45.
6. Enter a number or address you want to store and press
the
Save
soft key.
7. Continue the procedure from step 6 on page 34 to store
the number.
Phone Book
36
Using Phone Book Entry Options
While accessing any Phone Book entry, press the
Options
soft key to use the options for the entry.
The following options are available:
Paste
: allows you to paste the number into the normal
dialing mode. Use this option to dial a number similar to one
in Phone Book, such as a different extension in the same
office.
Use the
C
key to change the number as required; see page 23
for further details. When you are ready to dial, press the
key.
Edit
: allows you to edit the name and number.
Select
One Entry
to change the name and/or one number for
the selected entry. If you change the name, the number is
saved separately with the new name.
Select
All Entry
to change only the name of the entry.
Photo Caller ID
: allows you to assign one of the photos you
took using the camera as a caller ID image to be displayed
when you receive a call from the selected number. For details
about the Camera feature, see page 116.
Select a Photo: allows you to select a photo for the number.
View: displays the photo assigned to the number.
Delete: cancels the photo caller ID setting for the number.
To Press the
select the highlighted option
Select
soft key or the Right key.
highlight a different option Up or Down key until the option
you want highlights.
Phone Book
37
Delete
: allows you to delete the name and number from
Phone Book. You are asked to confirm that you wish to delete
the name and number by pressing the
Yes
soft key.
Copy
: allows you to copy the number to another location. You
can select the memory and the location number.
Caller Group
: allows you to organize your Phone Book entry
in caller groups so that the phone alerts you in a specific way
when a person from one of your groups calls you. Select one
of the ten groups available.
To remove an entry from a group, select the
No Group
option.
For more information about how to change caller group
properties, see page 39.
Add Entry
: allows you to add a new number to the currently
selected name.
Searching for and Dialing Number in
Phone Book
After storing numbers in Phone Book, you can search for them
in two ways; by name and by caller group.
Searching for a Number by Name
1. When the idle screen displays, press the
Name
soft key.
2. Press the
Select
soft key when
Search
highlights. You are
asked to enter a name.
3. Enter the first few letters of the name.
The Phone Book entries are listed, starting with the first
entry matching your input.
Phone Book
38
5. Once you have found the entry, press the key to dial
the number, or press the
Options
soft key to access the
Phone Book entry options; for further details, see page 36.
Searching for a Number by Caller Group
1. When the idle screen displays, press the
Name
soft key.
2. Scroll to
Group Search
by pressing the Up or Down key
and press the
Select
soft key. You are asked to enter a
group name.
3. Enter the first few letters of the group name that you wish
to find.
The caller groups are listed, starting with the first group
matching your input.
4. Scroll to the group you want by pressing the Up or Down
key and press the
View
soft key.
The Phone Book entries in the caller group are listed.
4.
To Press the
view the highlighted entry
View
soft key.
select a different
entry Up or Down key until the entry
you want highlights.
look for a name starting with
a different letter key labeled with the letter you
want.
5.
To Press the
view the highlighted entry
View
soft key.
select a different entry Up or Down key until the
entry you want highlights.
Phone Book
39
6. Once you have found the entry, press the key to dial
the number, or press the
Options
soft key to access the
Phone Book entry options; for further details, see page 36.
Editing a Caller Group
1. When the idle screen displays, press the
Name
soft key.
2. Scroll to
Group Edit
by pressing the Up or Down key and
press the
Select
soft key.
3. Scroll through the group list by pressing the Up or Down
key.
4. When the group you want highlights, press the
Options
soft key.
5. Select each option and change the settings, as required.
The following options are available:
•
Call Ring Tone
: allows you to set the ring tone to be
used when you receive a voice call from a person in the
group.
•
SMS Tone
: allows you to set the ring tone to be used
when you receive a text message from a person in the
group.
•
Graphic
: allows you to set the graphic icon to be
displayed when you receive a voice call from a person in
the group.
•
Group Name
: allows you to assign a name to the group.
For further details about how to enter characters, see
page 45.
6. When you are finished, press the
C
or key.
Phone Book
40
Speed-dialing
Once you have stored phone numbers in the SIM card, you
can set up to eight speed-dial entries and then dial them
easily whenever you want, simply by pressing the associated
number key.
Setting Up Speed-dial Entries
1. When the idle screen displays, press the
Name
soft key.
2. Scroll to
Speed Dial
by pressing the Up or Down key and
press the
Select
soft key.
3. Select the key to which you wish to assign the speed-
dialing number, from the
2
to
9
keys, and press the
OK
soft key.
Note:
Memory location 1 is reserved for your Voice Mail server
number.
If you have already assigned a number to the key, the
Options
soft key replaces the
OK
soft key. Go to step 6.
4. Select a Phone Book entry and press the
View
soft key.
5. Select a number if the entry has more than one number,
by pressing the Up or Down key and press the
Select
soft
key.
6. Once you have assigned a number to the selected key, you
can use the following options by pressing the
Options
soft
key:
•
Change
: allows you to assign a different number to the
key.
•
Delete
: allows you to clear the setting so that no
number is assigned to the key.
Phone Book
41
•
Delete All
: allows you to clear the settings for all keys
so that no numbers are assigned to any of the keys.
•
Number
: allows you to view the number assigned to the
key.
7. When you are finished, press the
C
or key.
Speed-dialing from Phone Book
To speed-dial the numbers assigned to keys
2
to
9
, press and
hold the appropriate key.
Speed-dialing from the SIM Card
1. In Idle mode, enter the location number of the number
you want to dial.
2. Press the key.
The list of the entries in the SIM card appears.
3. If necessary, scroll through the list using the Up or Down
key.
4. When the number displays, press the
Dial
soft key or
key.
Phone Book
42
Deleting All of the Phone Book Entries
You can delete all your entries from your phone’s memory,
your SIM card or both.
1. When the idle screen displays, press the
Name
soft key.
2. Scroll to
Delete All
by pressing the Up or Down key and
press the
Select
soft key.
3. To place a check mark by the memory location you want to
empty,
All
,
SIM Memory
or
Phone Memory
, press the
Mark
soft key.
You can remove the check mark by pressing the
Unmark
soft key.
4. Press the
Delete
soft key to delete the entries in the
selected memory location.
5. Enter the phone password and press the
OK
soft key.
Note:
The password is preset to “00000000” at the factory. To
change this password, see page 159.
6. When the confirmation message appears, press the
Yes
soft key.
To cancel the deletion, press the
No
soft key.
7. When you are finished, press the
C
or key.
Phone Book
43
Checking the Memory Status
You can check how many names and numbers are stored in
Phone Book; SIM card and phone memories. You can also see
the capacity of both memories.
1. When the idle screen displays, press the
Name
soft key.
2. Select the
Memory Status
option by pressing the Up or
Down key and press the
Select
soft key.
3. Press the Up or Down key to view the number of the
entries you stored and the total number of the entries you
can store in the SIM card and the phone’s memory.
4. When you are finished, press the or key.
Using the Service Dialing Numbers
You can view the list of Service Dialing Numbers (SDN)
assigned by your service provider. These numbers include
emergency numbers, directory enquiries and voice mail
numbers.
1. When the idle screen displays, press the
Name
soft key.
2. Select the
SDN
option by pressing the Up or Down key
and press the
Select
soft key.
3. Scroll through the numbers by using the Up or Down key.
4. To dial the number displayed, press the
Dial
soft key.
5. This menu is available only when your SIM card supports
Service Dialing Numbers.
Phone Book
44 Entering Text
45
Entering Text
When using your phone, you will often need to enter text,
such as when storing a name in Phone Book, creating your
personal greeting or scheduling events on your calendar. You
can enter alphanumeric characters by using your phone’s
keypad.
Your phone has the following text input modes:
●
T9 mode
This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more
than one letter; for example, when you press the
5
key
once, J, K or L displays. The T9 mode automatically
compares your keystrokes with an internal linguistic
dictionary to determine the correct word, thus requiring
far fewer keystrokes than the traditional Alphabet mode.
●
Alphabet mode
These modes allow you to enter letters by pressing the key
labeled with the letter you want Press the key once, twice,
three or four times until it displays.
●
Number mode
This mode allows you to enter numbers.
●
Symbol mode
This mode allows you to enter symbols, such as
punctuation marks.
Entering Text
46
Changing the Text Input Mode
When you are in a field that allows characters to be entered,
you will notice the text input mode indicator on the display.
Example: Writing a text message
Note:
Additional text input mode may be available, depending upon
your country.
To select Press the right soft key until
T9 mode displays. See page 47.
Alphabet mode displays. See page 49.
Number mode
displays. See page 50.
Symbol mode the symbol list displays. See
page 50.
Text input mode
indicator
Write New
Options
Entering Text
47
Using T9 Mode
T9 is a predictive text input mode that allows you to key in
any character using single keystrokes. This text input mode is
based on a built-in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word by
pressing the
2
to
9
keys. Press each key only once for
each letter.
Example:To enter “Hello” in T9 mode, press the
4
,
3
,
5
,
5
and
6
keys.
The word you are typing appears on the display. It may
change with each key that you press.
2. Enter the whole word before editing or deleting the
keystrokes.
3. When the word displays correctly, go to step 4.
If not, press the
0
, Up or Down key to display alternative
word choices for the keys that you have pressed.
Example:Both “Of” and “Me” have the
6
and
3
keys. The
phone displays the most commonly used choice
first.
4. Insert a space by pressing the key and start entering
the next word.
Entering Text
48
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the word you
want to add, press the
0
, Up or Down key to display the
alternative words.
2. When you press the
0
, Up or Down key at the last
alternative word, the display shows
Add
on the bottom
line. Press the
Add
soft key.
3. If necessary, clear the word using the
C
key and enter the
word you want to add using Alphabet mode. See page 49.
4. Press the
OK
soft key.
The word is added to the T9 dictionary and becomes the
first word for the associated keypress.
Note:
This feature may not be available for some languages.
●
To enter periods, hyphens or apostrophes, press the
1
key.
T9 mode applies grammar rules to ensure that the correct
punctuation is used.
Example: The
1
key is used twice to display two
punctuation marks:
●
To shift the case in T9 mode, use the key. There are
three cases: Capital lock ( ), Lower case ( ) and Initial
capital ( ).
●
You can move the cursor by using the Left and Right keys.
To delete letters, press the
C
key. Press and hold the
C
key
to clear the display.
L
e t ’ s e a t .
Entering Text
49
Using Alphabet Mode
Use the
1
to
0
keys to enter your text.
1. Press the key labeled with the letter you want:
- Once for the first letter
- Twice for the second letter
- And so on
2. Select the other letters in the same way.
Note:
The cursor moves to the right when you press a different key.
When entering the same letter twice or a different letter on the
same key, just wait for a few seconds for the cursor to move to
the right automatically, and then select the next letter.
See the table below for more information about the
characters available:
Characters in the Order Displayed
Key Upper Case Lower Case
Space
Entering Text
50
●
To insert a space, press the key.
●
To shift the case in Alphabet mode, use the key. There
are three cases: Capital lock ( ), Lower case ( ) and
Initial capital ( ).
●
You can move the cursor by using the Left and Right keys.
To delete letters, press the
C
key. Press and hold the
C
key
to clear the display.
Using Number Mode
Number mode enables you to enter numbers into a text
message. Press the keys corresponding to the digits you want
to enter.
Using Symbol Mode
Symbol mode enables you to insert symbols into a text
message.
To Press the
select a symbol corresponding number key.
display more symbols Up or Down key.
clear the symbol(s)
C
key. When the input field is
empty, this key returns the
display to the previous mode.
insert the symbol(s) into your
message
OK
soft key.
cancel your input and return
to the previous mode
Back
soft key.
Options During a Call
51
Options During a Call
Your phone provides a number of control functions that you
can use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you want.
You can make another call while you have a call in progress if
your network supports this service.
To place a call on hold, simply press the
Hold
soft key. You
can reactivate the call whenever you want, by pressing the
Unhold
soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or look it up
in Phone Book.
2. Press the key to dial the second call.
The first call is automatically put on hold.
Or
1. Put the current call on hold by pressing the
Hold
soft key.
2. Make the second call in the normal way.
When you have an activate call and a call in hold, you may
switch between the two calls, changing the one on hold to
activate and placing the other on hold.
To switch between the two calls, simply press the
Swap
soft
key.
Options During a Call
52
The current call is placed on hold and the call on hold is
reactivated so that you can continue conversing with the
other person.
When you want to finish, end each call normally by pressing
the key.
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s microphone off, so
that the other person cannot hear you.
Example: You wish to say something to another person in the
room but do not want the person on the phone to
hear you.
To switch the microphone off temporarily:
1. Press the
Options
soft key.
2. If necessary, press the Down key to highlight the
Mute
option.
3. Press the
OK
soft key. The other person can no longer
hear you.
To switch the microphone back on:
1. Press the
Options
soft key.
2. If necessary, press the Down key to highlight the
Unmute
option.
3. Press the
OK
soft key. The other person can hear you
again.
Options During a Call
53
Muting/Sending Key Tones
These options allow you to turn the key tones off or on. If the
Mute Keys
option is selected, your phone does not transmit
the DTMF (Dual Tone Multi-Frequency) tones of the keys,
which allows you to press keys without hearing annoying key
tones during a call.
Note:
To communicate with answering machines or computerized
telephone systems, the
Send Keys
option must be selected.
Searching for a Number in Phone Book
You can search for a number in Phone Book during a call.
1. Press the
Options
soft key.
2. Press the Down key to highlight the
Phone Book
option.
3. Press the
OK
soft key.
The Phone Book entries are listed.
4. Enter the name that you wish to find.
5. If you enter the first few letters of the name, the Phone
Book entries are listed, starting with the first entry
matching your input.
6. To view the highlighted entry, press the
View
soft key.
For further details about the Phone Book feature, see
page 33.
Options During a Call
54
Using the Message Service (SMS)
If you receive an SMS (Short Message Service) message
during a call, the Message icon ( ) flashes on the display.
The SMS Service option enables you to read the message or
send a new message.
For further details about the Message feature, see page 65.
Call Waiting
You can answer an incoming call while you have a call in
progress, if this service is supported by the network and you
have set the
Call Waiting
menu (
Menu 9.3
) to
Activate
;
see page 140. You are notified of an incoming call by a call
waiting tone.
To answer a call while you have a call in progress:
1. Press the key to answer the incoming call. The first
call is automatically put on hold.
2. To switch between the two calls, press the
Swap
soft key.
3. To end a call on hold, press the
Options
soft key and
select the
End Held Call
option.
To end the current call, press the key.
Options During a Call
55
Making a Multi-party Call
A multi-party call is a network service that allows up to six
people to take part simultaneously in a multi-party or
conference call.
For further details about subscribing to this service, contact
your service provider.
Setting up the Multi-party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The first call
is automatically put on hold.
3. To join the first participant to the multi-party call, press
the
Options
soft key and select
Join
. Press the
OK
soft
key.
4. To add a new person to the multi-party call, call the person
in the normal way and then press the
Options
soft key.
Select the
Conference
option and press the
OK
soft key.
You can add incoming callers by answering the call and
pressing the
Options
soft key, and selecting
Conference
.
Repeat as required.
Having a Private Conversation With One
Participant
1. Press the
Options
soft key and choose the
Select One
option. Press the
OK
soft key.
The list of call participants appears.
2. Highlight a person by pressing the Up or Down key, and
press the
Select
soft key or the key.
Options During a Call
56
3. When the
Private
option highlights, press the
OK
soft
key.
Now you can talk privately to that person. The other
participants can continue to converse with each other.
4. To return to the multi-party call, press the
Options
soft
key and select
Conference
. Press the
OK
soft key.
All of the multi-party call participants can now hear each
other.
Dropping One Participant
1. Press the
Options
soft key and choose the
Select One
option. Press the
OK
soft key.
The list of call participants appears.
2. Highlight a person by pressing the Up or Down key, and
press the
Select
soft key or the key.
3. Press the Down key to select the
Remove
option and
press the
OK
soft key.
The call ends with that participant, but you can continue to
talk to the other participants.
4. When you want to end the multi-party call, close the
phone or press the key.
Using the Menus
57
Using the Menus
You can tailor the phone’s range of functions to your needs
using menus and sub-menus. Menus and sub-menus can be
accessed by scrolling using the Navigation keys or by using
the shortcuts.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the
Menu
soft key.
2. Scroll using the Up and Down keys to reach a main menu,
Phone Settings
for example. Press the
Select
soft key or
the Right key to enter the menu.
3. If the menu contains sub-menus,
Language
for example,
you can access them by scrolling and pressing the
Select
soft key.
If the menu that you have selected contains further
options, repeat this step.
4.
To Press the
scroll through the menus Up or Down keys or use the
and keys.
confirm the chosen setting
Select
soft key or the Left key.
return to the previous menu
level soft key or the Right key.
exit the menu without
changing the settings key.
Using the Menus
58
Using Shortcuts
The menu items, such as menu, sub-menus and options, are
numbered and can be accessed quickly by using their shortcut
numbers. The shortcut number is shown at the bottom right
next to the soft key on the display. Simply press the
Menu
soft key and enter the number of the menu you want.
Notes:
• The numbers assigned to each menu are indicated on the list on the
next page. They may not match the menu number on the phone,
depending on the services supported by your SIM card.
• For the menu number 10, use the
0
key.
Example: Accessing the
Language
menu.
1. Press the
Menu
soft key.
2. Press the
7
key for
Phone Settings
.
3. Press the
4
key for
Language
.
The languages available display.
List of Menu Functions
The following list shows the menu structure available and
indicates the number assigned to each option and the page
where you can find a description of each feature.
Note:
If you use a SIM AT card that provides additional services, the
SIM AT
menu displays when you press the
Menu
soft key to
enter Menu mode. For further details, see your SIM card
instructions.
Using the Menus
59
1. Text Messages
(see page 65)
1.1 Inbox
1.2 Outbox
1.3 Write New
1.4 Templates
1.5 Settings
1.5.1 Setting 1
*
1.5.2 Setting 2
*
1.5.3 Common Setting
1.6 Delete All
1.7 Memory Status
1.7.1 SIM Memory
1.7.2 PHONE Memory
1.7.3 CB Memory
1.8 Voice Mail
1.8.1 Connect to Voice Mail
1.8.2 Voice Mail Number
1.9 Broadcast
1.9.1 Read
1.9.2 Receive
1.9.3 Channel List
1.9.4 Language
2. Multimedia Messages
(see page 75)
2.1 Inbox
2.2 Outbox
2.3 Shop MMS
2.4 Draft
2.5 Write New
2.6 Templates
2.7 Delete All
2.8 Memory Status
* Shows only if supported by your SIM card.
Using the Menus
60
2. Multimedia Messages
(continued)
2.9 Setup
2.9.1 Delivery Report
2.9.2 Read Replay
2.9.3 Auto Download
2.9.4 Message Acceptance
2.9.5 Hide ID
2.9.6 Expiry Date
2.9.7 Delivery Time
2.9.8 Priority
2.9.9 Report Allowed
2.9.10 Page Duration
2.10 MMS Profile
3. E-Mail
(see page 97)
3.1 Inbox
3.2 Outbox
3.3 Draft
3.4 Write New
3.5 Templates
3.6 Delete All
3.7 Memory Status
3.8 Setup
3.8.1 Account
3.8.2 Check Interval
3.8.3 Signature
3.8.4 Send Copy to Self
3.9 Email-Profile
Using the Menus
61
4. Call Records
(see page 97)
4.1 Missed Calls
4.2 Incoming Calls
4.3 Outgoing Calls
4.4 Delete All
4.5 Call Time
4.5.1 Last Call
4.5.2 Total Outgoing
4.5.3 Total Incoming
4.5.4 Life Time
4.5.5 Reset Timers
4.6 Call Cost
4.6.1 Last Call Cost
4.6.2 Total Cost
4.6.3 Max Cost
4.6.4 Reset Counters
4.6.5 Set Max Cost
4.6.6 Price/Unit
5. Camera
(see page 101)
5.1 Take Photos
5.2 My Photos
5.3 Record Videos
5.4 My Videos
5.5 Delete All
5.6 Memory Status
Using the Menus
62
6. Sound Settings
(see page 109)
6.1 Ring Tone
6.2 Ring Volume
6.3 Shop Ringtones
6.4 Alert Type
6.5 Keypad Tone
6.6 Message Tone
6.6.1 SMS Tone
6.6.2 SMS-CB Tone
6.6.3 MMS Tone
6.7 Folder Tone
6.8 Power On/Off
6.9 Extra Tones
7. Phone Settings
(see page 115)
7.1 Display Settings
7.1.1 Wallpaper
7.1.2 Front LCD
7.1.4 Menu Style
7.1.4 Shop Graphics
7.1.5 Back Light
7.1.6 Service Light
7.1.7 Graphic Logo
7.2 Greeting Message
7.3 Own Number
7.4 Language
7.5 Security
7.5.1 PIN Check
7.5.2 Change PIN
7.5.3 Phone Lock
7.5.4 Change Password
7.5.5 SIM Lock
7.5.6 FDN Mode
*
7.5.7 Change PIN2*
* Shows only if supported by your SIM card.
Using the Menus
63
7. Phone Settings
(continued)
7.6 Extra Settings
7.7 Short Cut
7.8 TTY Setting
7.9 Reset Settings
8. Organizer
(see page 125)
8.1 Alarm
8.1.1 Once Alarm
8.1.2 Daily Alarm
8.1.3 Morning Call
8.1.4 Remove Alarm
8.1.5 Autopower
8.2 Calendar
8.3 Time & Date
8.3.1 Set Time
8.3.2 Set Date
8.3.3 World Time
8.3.4 Time Format
8.3.5 Set Time From Network
8.4 Calculator
8.5 To Do List
8.6 Voice Memo
8.6.1 Record
8.6.2 Voice Memo List
8.6.3 Delete All
8.6.4 Memory Status
8.7 Currency Exchange
9. Network Services
(see page 137)
9.1 Call Forwarding
9.1.1 Forward Always
9.1.2 Busy
9.1.3 No Reply
9.1.4 Unreachable
9.1.5 Cancel All
Using the Menus
64
9. Network Services
(continued)
9.2 Call Barring
9.2.1 All Outgoing
9.2.2 International
9.2.3 International Except to Home
9.2.4 All Incoming
9.2.5 Incoming While Abroad
9.2.6 Cancel All
9.2.7 Change Barring Password
9.3 Call Waiting
9.4 Network Selection
9.5 Caller ID
9.6 Closed User Group
9.6.1 Index List
9.6.2 Outside Access
9.6.3 Default Group
9.6.4 Deactivate
*
10. Funbox
(see page 145)
10.1 WAP Browser
10.1.1 Home
10.1.2 Favorites
10.1.3 http://
10.1.4 Settings
10.1.5 Clear Cache
10.1.6 Push Message
10.2 Shop Games
10.3 Games
10.4 Sounds
10.5 Images
10.6 Delete All
10.7 Memory Status
Note
: The Shortcut number of the
Funbox
menu is 0.
* Shows only when a Closed User Group is activated.
Text Messages
65
Text Messages
Short Message Service (SMS) allows you to send and receive
short text messages to and from other GSM mobile phones.
In addition, your phone supports the Enhanced Messaging
Service (EMS), which enables you to include simple pictures,
melodies, and animated images in your messages. To use this
feature, you must subscribe to your service provider’s
message service.
When the Message icon ( ) appears, you have received new
text messages. When the memory is full, an error message
displays and you cannot receive any new messages. Use the
Delete
option in each message box to delete obsolete
messages.
Inbox
(Menu 1.1)
This message box is used to store the messages that you
have received.
When you enter this menu, the list of messages in the box
displays with the senders’ phone numbers or names, if
available in your Phone Book.
1. Select a message from the list and press the
View
soft
key to read the message contents.
2. To scroll through the contents, press the Up or Down key.
3. To scroll to the previous or next message, press the or
key.
Text Messages
66
While reading a message, you can choose the following
options by pressing the
Options
soft key:
Delete
: allows you to delete the message.
Forward
: allows you to send/resend the message. For
further information about how to send a message, see
page 68.
Text Reply
: allows you to reply to the sender by sending a
text message.
Call Back
: allows you to call the sender back.
Save Address
: allows you to extract the sender’s number
and URL, e-mail addresses or phone numbers from the
message text, so that you can save them in your phone’s
memory.
Move to Phone
: allows you to move the message from the
SIM card to the phone’s memory. This option is only available
for messages stored in the SIM card.
Move to SIM
: allows you to move the message from the
phone’s memory to the SIM card. This option is only available
for messages stored in the phone’s memory.
Select Objects
: allows you to save media items, such as
sounds or images, from the message into your phone’s
memory. You can then use the items when writing a message.
For details, see page 69.
Text Messages
67
Outbox
(Menu 1.2)
This message box is used to store the messages that you
have already sent or will send.
When you enter this menu, the list of messages in the box
displays with the recipients’ phone numbers or names, if
available in your Phone Book.
1. Select a message from the list and press the
View
soft
key to read the message contents.
2. To scroll through the contents, press the Up or Down key.
3. To scroll to the previous or next message, press the or
key.
While reading a message, you can choose the following
options by pressing the
Options
soft key:
Delete
: allows you to delete the message.
Send
: allows you to send/resend the message. For further
information about how to send a message, see page 68.
Save Address
: allows you to extract the destination number
and URL, e-mail addresses or phone numbers from the
message text, so that you can save them in your phone’s
memory.
Move to Phone
: allows you to move the message from the
SIM card to the phone’s memory. This option is only available
for messages stored in the SIM card.
Move to SIM
: allows you to move the message from the
phone’s memory to the SIM card. This option is only available
for messages stored in the phone’s memory.
Select Objects
: allows you to save the media items, such as
sounds or images, from the message into your phone’s
memory. You can then use the items when writing a message.
For details, see page 69.
Text Messages
68
Write New
(Menu 1.3)
In this menu, you can write and send a text message.
Note:
When you add media items to the message, the number of
characters you can enter decreases.
Creating a Simple Text Message
1. Create your message.
Note:
For more information about entering characters, see
page 45.
1. When you finish entering your message, press the
Options
soft key. The following options are available:
•
Send Only
: allows you to send the message. The
message is deleted after sending.
•
Save and Send
: allows you to save a copy of the
message to the Outbox and then send the message.
•
Save Only
: allows you to save the message in the
Outbox so that it can be sent later.
• For more information about the
Text Formatting
,
Add
Objects
,
Add Templates
,
Add Phonebook
,
Add
Bookmark
and
Language
options, see page 69.
2. Select
Send Only
or
Save and Send
, and press the
Select
soft key.
If you only want to save the message, select
Save Only
.
After saving the message, the phone returns to the
Text
Messages
menu.
3. If you select a save option, select a location and press the
OK
soft key.
Text Messages
69
4. Enter a destination number and press the
OK
soft key. The
message is sent.
Note:
When the phone fails to send the message, it asks you if you
want to retry. Press the
OK
soft key to confirm. Otherwise,
press the
Exit
soft key to return to the message screen.
Creating a Message Using the Options
1. Create your message.
2. Press the
Options
soft key.
3. Select one of the following options by using the Up and
Down keys and pressing the
Select
soft key.
•
Text Formatting
: allows you to format the style of the
text.
For the
Size
attribute,
Normal
,
Large
and
Small
sizes
are available. For the
Underline
and
Strikethrough
attributes, select
On
or
Off
.
The attributes can be combined.
•
Add Objects
: allows you to add a sound, melody,
picture or animated image to your message. Select the
category of the item to be added. In each category, you
can select from the various factory-set items or choose
an item received from other sources, such as the
Internet or other phones.
•
Add Templates
: allows you to apply one of the preset
message templates to the text. Select one of the five
messages stored in the
Templates
menu (
Menu 1.4
).
For further details, see page 70.
•
Add Phonebook
: allows you to add a Phone Book entry
to your message. Select one from the list.
Text Messages
70
•
Add Bookmark
: allows you to add a web page’s
address stored in your Favorite list (
Menu 10.1.2
).
Select one from the list.
•
Language
: allows you to change the language to be
used in T9 input mode. Select the language to be used.
4. Complete the message, and send or save it by following
the procedure from step 2 on page 68.
Templates
(Menu 1.4)
Using this menu, you can preset messages that you use most
frequently.
Select an empty location or the message template you want
and press the
Select
soft key.
The following options are available:
Edit
: allows you to write a new message or edit the message.
Note:
For further details about how to enter characters, see page 45.
Send Message
: allows you to retrieve the message. Once
you have completed the message, you can send, save and
send, or simply save it. For details about how to send a
message, see page 68.
Delete
: allows you to delete the message. You are asked to
confirm the deletion by pressing the
Yes
soft key.
Text Messages
71
Settings
(Menu 1.5)
In this menu, you can set up default message information. A
setting group is a collection of settings required to send
messages. The number of setting groups available depends
on the capacity of your SIM card.
Note:
The last setting you accessed is automatically activated for
sending messages.
Setting x
(where x is the setting group number): each group
has its own sub-menu.
Service Center: allows you to store or change the number of
your message center, which is required when sending
messages. You must obtain this number from your service
provider.
Default Destination: allows you to store the default
destination number. The number automatically displays on
the Destination screen when you create a message.
Default Type: allows you to set the default message type to
Text
,
Fax
,
Email
or
Paging
. The network can convert the
messages into the selected format.
Default Validity: allows you to set the length of time your text
messages are stored at the message center while attempts
are made to deliver them.
Setting Name: allows you to give a name to the setting group
currently being defined.
Common Setting
: The following options are available:
Reply Path: allows the recipient of your message to send you
a reply message using your message center, if your network
supports this service.
Text Messages
72
Delivery Reports: allows you to activate or deactivate the
report function. When this function is activated, the network
informs you whether or not your message has been delivered.
Bearer Selection: allows you to choose either
GSM
or
GPRS
,
depending on your network.
Character Support: allows you to choose a character type
from
GSM-Alphabet
,
Uni-Code
or
Automatic
. If you select
Uni-Code
and your recipient’s phone does not support it,
your recipient may not be able to read your message.
Delete All
(Menu 1.6)
This menu allows you to delete all of the text messages in
each message box and broadcast messages. You can also
delete all of your messages at one time.
When a confirmation message displays, press the
Yes
soft
key to confirm.
To Press the
select a message box to
clear Up or Down key. To delete all of
your messages, select
All
Messages
.
place a check mark
Mark
soft key.
remove the check mark
Unmark
soft key.
delete the marked objects
Delete
soft key.
Text Messages
73
Memory Status
(Menu 1.7)
This menu shows the memory status and how many
messages are currently stored in the SIM, phone, and CB
(Cell Broadcast) memories.
Voice Mail
(Menu 1.8)
This menu provides you with a way of accessing your voice
mailbox, if provided by your network.
The following options are available:
Connect to Voice Mail
: before using the Voice Mail feature,
you must enter the voice server number obtained from your
service provider; see
Menu 1.8.2
. You can then select this
option and press the
OK
soft key to listen to your messages.
You can connect to the voice server by pressing and holding
the
1
key in Idle mode.
Voice Mail Number
: allows you to change the voice mail
server number, if necessary.
Note:
Voice mail is a network feature. Please contact your service
provider for further details.
To Press the
enter the server number corresponding numeric keys.
correct a digit
C
key.
move the cursor to the left or
right without clearing the digit Left or Right key.
Text Messages
74
Broadcast
(Menu 1.9)
This network service allows you to receive text messages on
various topics, such as the weather or traffic. Cell
Broadcasting (CB) messages display as soon as they are
received, provided that:
●
the phone is in Idle mode.
●
the Receive option is set to
Enable
.
●
the message channel is currently active on the channel list.
The following options are available:
Read
: lets you view the message.
Volatile
displays the
messages from the network, but loses its contents as soon as
the phone is switched off. Scroll through the message using
the Up and Down keys. While reading a message, press the
Save
soft key to store the message in the
Archive
box for
later retrieval.
Receive
: allows you to enable or disable the reception of
broadcast messages.
Channel List
: allows you to indicate the channels from which
you wish to receive cell broadcast messages. The following
options are available:
Select
: used to enable or disable channels on the list by
marking or unmarking them respectively.
Add Channel
: used to enter the ID and title for a new
channel.
Delete
: used to remove a channel from the list.
Edit
: used to change the ID and title of an existing channel.
Language
: allows you to select your preferred language to
be used when displaying cell broadcast messages.
Please contact your service provider for more information.
Multimedia Messages
75
Multimedia Messages
Multimedia Message Service (MMS) is a messaging service
very similar to the Short Message Service (SMS). It provides
automatic and immediate delivery of personal multimedia
messages from phone to phone or from phone to e-mail.
In addition to the familiar text content of text messages,
multimedia messages can contain images, graphics, voice and
audio clips. An MMS message is a multimedia presentation in
a single entry. It is not a text file with attachments.
Using the MMS feature, your phone can receive and send
messages that contain multimedia files, such as your photos,
sounds and images you downloaded from the Internet and
voice memos you recorded. This function is available only if it
is supported by your service provider. Only phones that offer
multimedia message features can receive and display
multimedia messages.
Inbox
(Menu 2.1)
Viewing a Message When You Receive it
When a new multimedia message comes in, the display shows
the MMS Message icon ( ) and a text notification along with
the sender’s number.
1. Press the
Select
soft key to view brief information about
the message, such as the sender’s number, the message
size and the subject.
If you want to view the message later in the Inbox, press
the
Exit
soft key.
2. To scroll through the message information, press the Up or
Down key.
Multimedia Messages
76
3. Press the
Options
soft key to use the following options:
•
Retrieve
: retrieves the message from the MMS server.
•
Delete
: deletes the message.
•
More Information
: shows you detailed information
about the message.
4. To read the message, press the
Select
soft key when
Retrieve
is highlighted.
Your phone retrieves the message contents from the
server and displays it.
5. To scroll through the message, press the Up or Down key.
6. When you are finished, press the key.
Viewing a Received Message in the Inbox
When you access the
Inbox
menu (
Menu 2.1
), a list of
multimedia messages you received displays with the senders’
phone numbers, if they are available in your Phone Book, or
subjects. The icons on the left tell you the status of the
messages:
●
: Messages that have been opened.
●
: Messages that are unopened.
1. Select a message on the list and press the
Select
soft key.
The message displays and scrolls to the next page, if it has
one, after a specified time; for details about setting the
time, see page 86.
2. Press the
OK
soft key to go to the message view screen.
Or, the display automatically switches to the screen.
Multimedia Messages
77
3. To scroll through the message, press the Up or Down key.
If the message has more than one page, you can scroll
through the pages by using the Left and Right keys.
While viewing a message, you can choose the Message
options by pressing the
Options
soft key.
If you are viewing a new message, the options are the same
as when you view a message as soon as it is received. See the
previous section.
When you are reviewing a message retrieved from the MMS
server, the following options are available:
Delete
: deletes the message.
Reply
: allows you to reply to the sender by sending a text or
multimedia message.
Call Back
: allows you to call the sender back.
Cut Address
: allows you to extract the sender’s number or e-
mail address and URL, other e-mail addresses or phone
numbers from the message text.
Forward
: allows you to forward the message to another
person.
Save Picture
: allows you to save an image from the
message into your phone. Images are stored in the
Images
folder (
Menu 10.5
).
Save Sound
: allows you to save a sound from the message
into the
Sounds
folder (
Menu 10.4
).
Information
: shows you information about the message,
such as the subject, sender’s e-mail address or phone
number, message size, recipient’s e-mail address or phone
number, its priority, and time and date when the message was
received.
Multimedia Messages
78
Outbox
(Menu 2.2)
When you access this menu, the list of multimedia messages
that you sent or saved displays. The icons on the left tell you
the status of each message:
●
: Messages currently being sent
●
: Messages sent
●
: Messages your phone couldn’t send
●
: Messages to be sent
●
: Messages deferred
1. Select a message on the list and press the
Select
soft key.
The message displays and scrolls to the next page, if it has
one, after a specified time; for details about setting the
time, see page 86.
2. Press the
OK
soft key to go to the message view screen.
Or, the display automatically switches to the screen.
3. To scroll through the message, press the Up or Down key.
If the message has more than one page, you can scroll
through the pages by using the Left and Right keys.
While viewing a message, you can choose the following
options by pressing the
Options
soft key:
Delete
: deletes the message.
Cut Address
: allows you to extract the destination numbers
or e-mail addresses and URL, e-mail addresses or phone
numbers from the message text.
Send
: allows you to send/resend the message.
Multimedia Messages
79
Edit Message
: allows you to change the message contents,
sound, photo, or text.
Information
: shows you information about the message,
such as the status, subject, sender’s e-mail address or phone
number, message size, transaction ID, MMS version,
recipient’s e-mail address or phone number, and time and
date when the message was sent.
Shop MMS
(Menu 2.3)
This menu allows you to access the web site given by your
service provider to download images or sounds.
Once you have downloaded sounds or images, they are saved
in the
Sounds
folder (
Menu 10.4
) or
Images
folder (
Menu
10.5
) respectively.
Draft
(Menu 2.4)
After creating a multimedia message, you can store it in this
message box to be sent at a later time.
For further details about viewing a message, see “Outbox” on
page 78.
Multimedia Messages
80
Write New
(Menu 2.5)
This menu allows you to create a new multimedia message
and send to one or multiple destinations.
Creating and Sending a Multimedia Message
1. Enter the subject of your message and press the
OK
soft
key.
For further details about entering characters, see page 45.
2. When
Add Here
highlights, press the
Options
soft key
and add the message contents using one of the following
options:
•
Add Text
: enter the message text and press the
OK
soft
key.
•
Add My Photo
: allows you to add a photo you took
using the camera on your phone. Select
New Photo
to
take a new photo, or
My Photos
to add one of the
photos stored in the phone’s memory. For further details
about using the camera, see page 116.
•
Add Picture
: allows you to add a photo stored in the
Images
folder (
Menu 10.5
). Choose a photo and press
the
Select
soft key. You can add downloaded images if
they are in correct format and your service provider
supports them.
•
Add Sound
: allows you to add a sound file. Select
Record
to record a new voice memo or
Sound List
to
add one of the voice memos stored in the phone. You
can add downloaded sounds if your service provider
supports them.
Multimedia Messages
81
•
Send
: allows you to send the message. Use this option
when you have finished creating the message.
•
Save
: saves the message in the
Draft
(
Menu 2.4
) or
Templates
(
Menu 2.6
) box for later use.
•
Settings
: allows you to change the message settings.
For further details about each setting option, see
page 85. After changing the settings, you need to press
the soft key or the
C
key to go to back to the options
screen.
•
Add Destination
: allows you to enter destination
numbers or addresses. See steps 6 to 11. After adding
them, you need to press the soft key or the
C
key to
go to back to the options screen.
•
Preview
: shows your message as it will display on the
recipient’s phone.
Note:
You can add text, an image and a sound only once for each
page.
3. Repeat step 2 until you finish creating your message.
4. If you want to change the added items, press the Up or
Down key to highlight one and press the
Options
soft key.
Note:
The options available are different, depending on whether
the item you select on the message screen is text, an
image, a sound or the Page field.
The following options are available:
•
Edit Text
/
Picture
/
Sound
: allows you to change the
text or replace the image or sound with another one.
•
Add Page
: allows you to add more pages. After you add
a page, the display shows you the current page number
Multimedia Messages
82
and the memory space used for the page. You can move
to each page using the Left or Right key on the message
screen.
•
Delete
: deletes the item from your message.
•
Duration
: allows you to set when and how long text, an
image, a sound, or a page displays on the message
presentation screen. If the duration you set is shorter
than the content duration for a particular page, the
content duration is automatically decreased.
•
Send
: allows you to send the message.
•
Save
: saves the message in the
Draft
(
Menu 2.4
) or
Templates
(
Menu 2.6
) box for later use.
•
Settings
: allows you to change the message settings.
For further details about each setting option, see
page 85.
•
Add Destination
: allows you to enter destination
addresses. See steps 6 to 11.
•
Preview
: shows your message as it will display on the
recipient’s phone.
5. When you have finished creating the message, choose
Send
from the options and press the
Select
soft key.
6. Select a destination type,
To
,
Cc
or
Bcc
, and press the
Select
soft key.
7. Choose one of the following options and press the
Select
soft key:
•
Phone Number
: allows you to enter the phone number
you want.
•
E-Mail Address
: allows you to enter the e-mail address
of the recipient.
Multimedia Messages
83
•
Phone Book
: allows you to retrieve a number from your
Phone Book.
8. Enter a number or an e-mail address, or select a number
from Phone Book.
9. When the correct number or address displays, press the
OK
soft key.
10.To add a destination, press the
Select
soft key when
Add
Destination
highlights. Repeat from step 7.
If you want to edit the destinations, select one and press
the
Select
soft key. You can change or delete it.
11.To enter additional numbers or addresses to the other
destination types, press the
C
key or the soft key and
repeat steps 6 through 10.
You can enter up to 10 destinations each for
To
,
Cc
and
Bcc
.
12. When you are finished entering the destinations, select
Send Message
and press the
Select
soft key.
Your phone sends the message.
Templates
(Menu 2.6)
This menu stores messages you saved as templates so that
you can use them to make new messages.
1. Scroll through the template list using the Up and Down
keys.
2. When the message template you want highlights, press
the
Select
soft key.
3. Press the
OK
soft key to use the following options, or the
display automatically shows the options after a specified
time:
Multimedia Messages
84
•
Edit
: allows you to send a message using the template.
For further details about how to send a message, see
page 80.
•
Delete
: allows you to delete the message. You are
asked to confirm the deletion by pressing the
Yes
soft
key.
4. Press the key to return to Idle mode.
Delete All
(Menu 2.7)
This menu allows you to delete all of the multimedia
messages in each message box. You can also delete all of
your messages at one time.
When a confirmation message displays, press the
Yes
soft
key to confirm.
Memory Status
(Menu 2.8)
You can check the amount of the memory being used and the
memory remaining for multimedia messages.
Each time you press the
Next
soft key, the display shows the
total space, including the used and free space. It also shows
how much space is currently occupied by each message box.
To Press the
select a message box to
clear Up or Down key. To delete all of
your messages, select
All
Messages
.
place a check mark
Mark
soft key.
remove a check mark
Unmark
soft key.
delete the marked messages
Delete
soft key.
Multimedia Messages
85
Setup
(Menu 2.9)
You can change the default settings for sending or receiving
multimedia messages.
The following options are available:
Delivery Report
: when this option is enabled, the network
informs you whether or not your message has been delivered.
Read Reply
: when this option is enabled, your phone sends a
request for a reply along with your message to the recipient.
Auto Download
: you can set whether or not your phone
retrieves new incoming messages from the MMS server
without notifications. When this option is enabled, the phone
automatically retrieves new messages from the server. As
soon as you receive a message, you can use more options
while you are reading. See page 77 for further details about
the options.
Message Acceptance
: you can specify the category of
messages you want to receive.
Hide ID
: when this option is enabled, your phone number
does not display on the recipient’s phone.
Expiry Date
: you can select the length of time your
messages are stored in the message center after they are
sent.
Delivery Time
: you can set a delay time before the phone
sends your messages.
Priority
: you can select the priority level of your messages.
Report Allowed
: when this option is enabled, the sender of
an incoming message receives a delivery report from the
network.
Multimedia Messages
86
Page Duration
: you can set the length of time one page of a
received message displays on the message presentation
screen. After a specified time, the display automatically
scrolls to the next page.
MMS Profile
(Menu 2.10)
In this menu, you can configure various network settings that
are required when you send or receive multimedia messages.
Notes:
• The last profile you accessed is automatically activated for sending
messages.
• If you change the MMS settings without first checking with your
service provider, the MMS feature may not work properly.
The following options are available for each profile:
Profile name
: enter a name that you wish to assign to the
MMS server.
Connection URL
: enter the address of your MMS server.
Security
: select a data transmission mode. Choose
Secure
to protect your data against unauthorized access; otherwise,
choose
Non-Secure
.
IP Address
: enter the gateway address required to connect
to the MMS server.
User Name
: enter the user ID required to connect to the
MMS server.
Password
: enter the password required to connect to the
MMS server.
APN
: enter the access point name used for the address of the
MMS server.
For further details, contact your service provider.
E-Mail
87
E-Mail
You can send or receive e-mail messages directly using your
phone. Using the E-mail feature, you can receive or send
sounds and pictures, as well as Phonebook entries or calendar
memos.
To use this feature, you need to subscribe to an e-mail
message service and set up your e-mail account. For further
details, contact your service provider.
Inbox
(Menu 3.1)
This menu allows you to access your e-mail Inbox and read
the e-mail messages you received.
1. Press the
Select
soft key when
Check E-Mail
highlights.
2. Select the e-mail account from which you want to retrieve
e-mails and press the
Select
soft key.
Note
: For further details about setting up an
e-mail account, see page 94.
The list of e-mail messages you received displays. The
icons on the left tell you the status of each message:
• : The header hasn’t been read.
• : The header has been read.
• : The contents have been read.
• : The message has attachments and the contents
have been read.
• : The message has been deleted from both the phone
and e-mail server. This icon disappears when you
disconnect the phone from the server.
E-Mail
88
3. Scroll to an e-mail from the list and press the
Select
soft
key.
When the e-mail is not read, the display shows you its
header, such as sender’s name, e-mail address, Cc
address(es), date when the message was sent and
subject.
If the e-mail has already been read, the display
immediately shows you its text. Skip to step 6.
4. Press the
Options
soft key.
The following options are available:
•
Retrieve
: retrieves the e-mail text from the e-mail
server.
•
Delete
: deletes the e-mail. You can select to either
delete it from your phone or from both the phone and e-
mail server.
•
Disconnect
: disconnects your phone from the e-mail
server.
5. Select
Retrieve
and press the
Select
soft key.
The phone displays the e-mail text.
6. To scroll through the text, press the Up or Down key.
You can read the next or previous pages using the Right
and Left keys.
After opening an e-mail, you can use the following options by
pressing the
Options
soft key:
Delete
: deletes the e-mail. You can select to either delete it
from your phone or from both the phone and e-mail server.
Reply
: allows you to send a reply to the sender.
Forward
: allows you to forward the e-mail to another person.
E-Mail
89
Cut Address
: allows you to extract the sender’s address and
the Cc addresses, so that you can save them in your
Phonebook.
Attachments
: allows you to view the attachments, such as
Phonebook entries, calendar memos, sounds or pictures. You
can save them into your phone’s memory.
Disconnect
: disconnects your phone from the e-mail server.
Information
: shows the e-mail header, such as the sender’s
name and e-mail address, Cc address(es), subject and e-mail
text.
Outbox
(Menu 3.2)
When you select this menu, the list of the e-mail messages
you sent or failed to send displays along with the message
status and subject. The icons on the left tell you the
messages’ status:
• : E-smail your phone couldn’t send.
• : E-mail with attachments your phone couldn’t send.
• : E-mail your phone successfully sent.
• : E-mail with attachments your phone successfully sent.
1. Select a message from the list and press the
Select
soft
key to read it.
The display shows you the recipients’ addresses, date and
time when the message was sent, and message text.
2. To scroll through the contents, press the Up or Down key.
After opening an e-mail, you can use the following options by
pressing the
Options
soft key:
Delete
: deletes the e-mail.
E-Mail
90
Cut Address
: allows you to extract the destination
addresses, so that you can save them in your Phonebook.
Send
: allows you to resend the e-mail.
Save
: allows you to save the e-mail in the
Draft
(
Menu 3.3
)
or
Templates
(
Menu 3.5
) box for later use.
Edit E-Mail
: allows you to change the message subject or
contents.
Add Attachments
: enables you to attach another item to the
message.
Draft
(Menu 3.3)
In this menu, you can retrieve the messages you saved.
When you select this menu, the list of the e-mail messages
you saved are displayed. The icons on the left tell you the
messages’ status displays:
• : Saved e-mail.
• : Saved e-mail with attachments.
For further details about selecting a message and using the
message options, see page 89.
Write New
(Menu 3.4)
To write and send an e-mail message:
1. Enter the subject of your e-mail and press the
OK
soft key.
For further details about entering characters, see page 45.
2. Enter the e-mail text and press the
Options
soft key.
3. Press the Up or Down key to select an option and press the
Select
soft key.
E-Mail
91
The following options are available:
•
Add Attachments
: enables you to attach one of your
Phonebook entries, memos stored on your calendar,
pictures or sounds. After selecting the file type you want
to add, choose an item from the list. After adding, press
the soft
key or the
C
key to go back to the Write
Option screen.
If you want to remove an attached item, select
Attachment View
and select it on the list. Press the
View
soft key and then the
Discard
soft key.
•
Send
: sends your message.
•
Save
: saves the message in the
Draft
(
Menu 3.3
) or
Templates
(
Menu 3.5
) box for later use.
•
Add Destination
: allows you to add destination
addresses. See steps 5 to 9. After adding, press the
soft
key or
C
key to go back to the Write Option screen.
•
Information
: shows the e-mail subject, the list of the
recipients you added, if any, and message text.
4. When you are finished creating the e-mail, choose
Send
from the options and press the
Select
soft key.
5. Select
To
,
Cc
, or
Bcc
to enter a destination address and
press the
Select
soft key.
6. Choose one of the following options and press the
Select
soft key:
•
Direct Enter
: allows you to directly enter the e-mail
address you want.
•
Phone Book
: allows you to retrieve an e-mail address
from your Phonebook.
7. Enter an e-mail address and press the
OK
soft key, or
select one from Phonebook and press the
Select
soft key.
E-Mail
92
8. When the correct address displays, select
To
,
Cc
, or
Bcc
and press the
Select
soft key.
9. When there is an e-mail address already entered in the
selected destination type, press the
Select
soft key when
Add Destination
highlights. Repeat from steps 6 to 8.
If you want to edit the destinations, select one and press
the
Select
soft key. You can change or delete it.
10. When you are finished adding the destinations, press the
Select
soft key when
Send E-Mail
highlights.
Your phone sends the e-mail.
Templates
(Menu 3.5)
This menu stores the e-mail messages you saved as
templates so that you can use them to make new messages.
When you select this menu, the list of the e-mail templates
you saved displays. The icons on the left tell you the
messages’ status:
• : Saved e-mail.
• : Saved e-mail with attachments.
Scroll to the template you want using the Up or Down keys
and press the
Select
soft key. The display shows the message
information.
Press the
Options
soft key to use the following options:
Edit E-mail
: allows you to change the message subject or
contents.
Send
: allows you to send the message.
E-Mail
93
Save
: makes a copy of the message in the
Draft
(
Menu 3.3
)
or the
Templates
box for later use.
Delete
: deletes the selected message.
Add Attachments
: enables you to attach one of your
Phonebook entries, memos stored on your calendar, pictures
or sounds. See page 91 for further details.
Delete All
(Menu 3.6)
This menu allows you to delete all of the e-mail messages in
each message box. You can also delete all of your messages
at one time.
When a confirming message displays, press the
Yes
soft key
to confirm.
To Press the
select a message box
to clear Up or Down key. To delete
all of your messages,
select
All
.
place a check mark
Mark
soft key.
remove a check
mark
Unmark
soft key.
delete the marked
messages
Delete
soft key.
E-Mail
94
Memory Status
(Menu 3.7)
You can check the amount of the memory being used and the
remaining memory for e-mail messages available.
The display shows the total space, including the free and used
space. It also shows how much space is currently occupied by
each message box.
Setup
(Menu 3.8)
You can change the default setting options for using the E-
mail feature.
The following options are available:
Account
: you can configure up to five e-mail accounts using
different service providers. The last account you accessed is
automatically activated for sending or receiving e-mail
messages.
For each account, the following options are available:
Account Name: enter a name for the current account.
Connect Name: select one of the profiles set in the
Email-
Profile
menu (
Menu 3.9
).
Name: enter the name to be displayed in your outgoing
messages as the sender name.
E-Mail Address: enter your e-mail address.
Protocol Type: specify an e-mail protocol type for the
incoming server, either
POP3
or
IMAP4
. Contact your e-mail
service provider for more information.
For the IMAP4 protocol, you can set whether or not the phone
retrieves e-mails with attachments. You can also select the
number of e-mail headers you want to retrieve.
E-Mail
95
Incoming Server: enter the IP address or domain name of the
server to be used for receiving messages. Your e-mail service
provider can give you this information.
User ID: enter your e-mail ID.
Password: enter your e-mail password.
Outgoing Server: enter the IP address or domain name of the
server to be used for sending messages. Your e-mail service
provider can give you this information.
Check Interval
: allows you to select how often the phone
checks the server for incoming messages.
Signature
: allows you to attach your name, phone number,
simple memo or tag line as a signature to your e-mail
messages.
Send Copy to Self
: allows you to set whether or not your
phone sends a copy of the outgoing e-mail to the e-mail
address specified in your account.
Email-Profile
(Menu 3.9)
In this menu, you can configure various network settings that
are required when you send or receive e-mail messages.
Notes
:
•
Your service provider can give you information about each
parameter.
• If you change the e-mail settings without first checking with
your service provider, the E-mail feature may not work
properly.
The following options are available for each profile:
Profile Name
: enter a name that you wish to assign to the e-
mail profile.
Connect Name
: enter a descriptive name for the connection.
E-Mail
96
User Name
: enter the user ID required to access the GPRS
network.
Password
: enter the password required to access the GPRS
network.
APN
: enter the access point name used for the address of the
GPRS network gateway.
Call Records
97
Call Records
In this menu, you can view the:
●
calls you missed, received or dialed.
●
length of your calls.
●
cost of your calls.
Note:
You can access the numbers in the three types of call records by
pressing the key in Idle mode.
Missed Calls
(Menu 4.1)
This menu lets you view the numbers of the most recent 20
you received.
The number or name, if available, displays together with the
time and date when the call was received.
By pressing the
Options
soft key, you can:
●
edit the number, if available, and save it in Phone Book.
●
delete the call from the list.
You can also dial the number by pressing the key.
Incoming Calls
(Menu 4.2)
This menu lets you view the most recent 20 numbers of the
calls you received.
The number or name, if available, displays together with the
time and date when the call was received.
By pressing the
Options
soft key, you can:
●
edit the number, if available, and save it in Phone Book.
●
delete the call from the list.
You can also dial the number by pressing the key.
Call Records
98
Outgoing Calls
(Menu 4.3)
This menu lets you view the most recent 20 numbers you
dialed.
The number or name displays together with the time and date
when the call was made.
By pressing the
Options
soft key, you can:
●
edit the number and save it in Phone Book.
●
delete the number.
You can also dial the number by pressing the key.
Delete All
(Menu 4.4)
This menu allows you to delete all of the records in each call
record. You can also delete all of your call records at one time.
When a confirmation message displays, press the
Yes
soft
key to confirm.
To Press the
select a call record to clear Up or Down key. To delete all of
your call records, select
All
Calls
.
place a check mark
Mark
soft key.
remove a check mark
Unmark
soft key.
delete the marked records
Delete
soft key.
Call Records
99
Call Time
(Menu 4.5)
This menu lets you view the timers for calls you made and
received.
Note:
The actual time invoiced for calls by your service provider may
vary, depending on network features, such as rounding-off for
billing purposes.
The following options are available:
Last Call
: length of the last call.
Total Outgoing
: total length of all calls you have made since
the timer was last reset.
Total Incoming
: total length of all calls you have received
since the timer was last reset.
Life Time
: the number and total duration of all calls made to
or from your phones since the phone was shipped form the
factory. This timer cannot be reset.
Reset Timers
: option used to reset the call timers. You must
first enter the phone password and then press the
OK
soft
key.
Note:
The password is preset to “00000000.” To change this
password, see page 159.
Call Cost
(Menu 4.6)
This network feature lets you view the cost of calls. This menu
may not be available depending on your SIM card.
The following options are available:
Last Call Cost
: cost of the last call you made.
Total Cost
: total cost of all calls made since the cost counter
was last reset. If the total cost exceeds the maximum cost set
Call Records
100
in the
Set Max Cost
option, you can no longer make any calls
until you reset the counter.
Max Cost
: maximum cost set in the
Set Max Cost
option.
See below.
Reset Counters
: option used to reset the cost counter. You
must first enter your PIN2 (see page 161) and then press the
OK
soft key.
Set Max Cost
: option used to enter the maximum cost
authorized for your calls. You must first enter your PIN2 (see
page 161) and then press the
OK
soft key.
Price
/
Unit
: option used to set the cost of one unit; this price
per unit is applied when calculating the cost of your calls. You
must first enter your PIN2 (see page 161) and then press the
OK
soft key
Camera
101
Camera
Using the camera module in your phone, you can take photos
of people or events while on the move. Additionally, you can
send photos to other people in a multimedia message or set a
wallpaper or caller ID image.
You can also record videos using your phone as a camcorder.
CAUTION
:
• Do not take photos of people without their permission.
• Do not take photos in a place where cameras are not allowed.
• Do not take photos in a place where you may interfere with
another person’s privacy.
Take Photos
(Menu 5.1)
This menu allows you to take photos. Your camera produces
JPEG photos.
You can take photos with the phone open or closed. When the
phone is closed, you can use the external display.
Note
: When you take a photo in direct sunlight or in bright
conditions, shadows may appear on the photo.
Camera
102
Taking a Photo with the Phone Open
1. Accessing the Take Photos menu turns the camera on. The
image to be captured appears on the display.
You can also press and hold the Up ( ) key or Camera key
on the right side of the phone in Idle mode to turn on the
camera.
2. Adjust the image by aiming the camera at the subject.
• Press the
0
key to turn on or off the flashlight.
• Press the right soft key to use the camera options. For
details, see below.
• Press the Up or Down key to zoom in or out the image.
• Press the Left or Right key to adjust the image
brightness.
• Press the Volume keys to flip vertically or horizontally.
3. Press the left soft key or Camera key to take the photo.
4. Press the
Save
soft key.
To discard the photo, press the
Cancel
soft key.
5.
T
o Press the
use the photo options
Options
soft
key. For
details, see page 105.
return to Capture
mode
Preview
soft key.
return to Idle mode key.
Camera
103
Using the Number Keys in Capture Mode
Using the Camera options
In Capture mode, you can use various options for the camera
by pressing the left soft key.
The following options are available:
Effects
: allows you to change the colour tone or apply special
effects to the photo.
Key Function
1 switches to Record mode. See page 106.
2 changes the display size.
3 selects the image quality.
4 selects the camera mode.
5 changes the color tone or apply special effects to the
photo.
6
7 selects a decorated frame.
8sets the timer.
9 switches to the
My photos
(
Menu 5.2
) menu. See
page 105.
To Press the
scroll to an option Up or Down key.
select the highlighted
option
Select
soft key or
key.
return to Capture
mode soft key or
C
key.
Camera
104
Frames
: allows you to use a decorated frame. Select a frame
from the list using the Navigation keys.
Multi-shot
: allows you to take a series of action stills. Select
the capture speed to
High Speed
or
Normal Speed
and the
number of photos for the camera to take. When you press the
left soft key or Camera key, the camera takes photos
successively.
After taking photos, press the
SaveAll
soft key to save all of
them or the
Save
soft key to save the selected one.
Rotation
: allows you to rotate the photo. You can see its
mirror image or flip the photo vertically.
Self Timer
: allows you to have a delay time before the
camera takes the photo. Select the length of time you want.
When you press the left soft key or Camera key, the camera
takes the photo after the specified time.
Settings
: allows you to change the image settings.
Photo Size: sets the image size to either
VGA(640x480)
,
QVGA(320x240)
,
QQVGA(160x120)
, or
Mobile(128x120)
. The selected image size displays on the
capture screen.
Photo Quality: allows you to select the image quality from
Economy
,
Normal
,
Fine
, and
Super Fine
. The selected
quality displays on the capture screen.
Taking a Photo with the Phone Closed
Note
: If the external display turns off, you first need to turn it on
by pressing and holding the Volume keys.
1. When the phone is closed, press and hold the Camera ( )
key on the right side of the phone.
Camera
105
The image to be captured appears on the external display
as a mirror image.
2. Adjust the image by aiming the camera at the subject.
You can turn on or off the flashlight using the Volume
keys.
3. Press the Camera key to take the photo.
Your phone automatically saves the photo and returns to
Capture mode.
My Photos
(Menu 5.2)
This menu allows you to review your photos.
When you access this menu, your phone displays the photos
in Thumbnail mode, which shows them as small images. Use
the Navigation keys to scroll through the photos.
To view the photos on the full screen, press the
View
soft
key. To go back to Thumbnail mode, press the
Multi
soft key.
Press the
Options
soft key to use the following options:
Send
: allows you to send the photo as a multimedia
message. For further details, see page 80.
Set as Wallpaper
: allows you to set the photo as your
wallpaper for the main or external display.
Set as Caller ID
: allows you to set the photo as a caller ID
image for a Phonebook entry.
Protection
: allows you to protect the photo from being
deleted.
Delete
: allows you to delete the photo.
Rename
: allows you to change the name of the photo.
Camera
106
Properties
: shows the properties of the photo, such as the
time and date when it was taken, file size, photo size,
protection status, file format, and file name.
Record Videos
(Menu 5.3)
You can record a video using your phone as a camcorder.
You can record up to five videos.
1. When the camera turns on, adjust the image by aiming
the camera at the subject.
• Press the
0
key to turn on or off the flashlight.
• Press the Up or Down key to zoom in or out the image.
You can also use the Volume keys.
• Press the Left or Right key to adjust the image
brightness.
• Press the
1
key to switch to Capture mode.
2. Press the Camera key or the left soft key to start
recording.
3. When you are finished, press the Camera key or the left
soft key to stop recording.
Or, the phone automatically stops when the recording time
expires.
4. Press the
Save
soft key. The video is saved and the
display returns to Record mode.
To discard the video, press the
Cancel
soft key.
Camera
107
My Videos
(Menu 5.4)
When you access this menu, the thumbnail images of your
videos display.
To play a video:
1. Press the Navigation keys to scroll to the video you want
to review.
2. Press the
Play
soft key to start playing the video.
Press the
Options
soft key on the video list to use the
following options:
Rename
: allows you to change the file name.
Delete
: allows you to delete the current video file.
Protection
: allows you to protect the video from being
deleted.
Properties
: shows the properties of the video, such as the
time and date when it was recorded, file size, protection
status, and playing time.
3.
To Press the
pause the playing
Pause
soft key.
resume
Continue
soft key.
stop
Stop
soft key.
return to Idle mode key.
Camera
108
Delete All
(Menu 5.5)
This menu allows you to delete all of the photos or videos
items. You can delete all of the items at one time.
When a confirmation message displays, press the
Yes
soft
key to confirm.
Memory Status
(Menu 5.6)
You can check the amount of the memory being used and the
memory remaining in the camera.
The display shows the total, used, and free space for photos
and videos.
To Press the
select a folder to clear Up or Down key. To delete all of
your items, select
All
.
place a check mark
Mark
soft key.
remove a check mark
Unmark
soft key.
delete the marked items
Delete
soft key.
Sound Settings
109
Sound Settings
You can use the Sound Settings feature to customize various
settings, such as the:
●
ring melody, volume and type.
●
sounds made when you press a key, receive a message,
open/close the phone or switch your phone on/off.
●
alert tone made every minute during a call, when you
make an error or when your call is connected to the
system.
Note:
When the phone is in Silent mode (see page 29), you cannot
change the sound settings.
Ring Tone
(Menu 6.1)
This menu allows you to select a ring melody.
You can choose between many different melodies. If you have
downloaded sounds from the Internet, you can use them in
this menu.
Ring Volume
(Menu 6.2)
This menu allows you to adjust the ring volume to one of five
levels.
Use the Up and Down keys or the Volume keys on the left side
of the phone to increase or decrease the volume.
Sound Settings
110
Shop Ringtones
(Menu 6.3)
This menu allows you to access the web site given by your
service provider to download sounds.
Once you have downloaded sounds, they are saved in the
Sounds
foler (
Menu 10.4
).
Alert Type
(Menu 6.4)
This menu allows you to specify how you are to be informed
of incoming calls.
The following options are available:
Light Only
: the service light flashes the phone neither rings
nor vibrates.
Melody
: the phone rings using the ring melody selected in
the
Ring Tone
menu (
Menu 6.1
).
Vibration
: the phone vibrates but does not ring.
Vibra+Melody
: the phone first vibrates three times and then
starts ringing.
Keypad Tone
(Menu 6.5)
This menu allows you to select the tone that the phone
sounds when you press a key.
To turn off the sound, select
Off
.
Sound Settings
111
Message Tone
(Menu 6.6)
This menu allows you to select how the phone informs you
that a new message has been received.
SMS Tone
(Menu 6.6.1)
The following options are available for alerting you to new
SMS messages:
Off
: the phone does not use the SMS tone.
Light Only
: the service light flashes.
Vibration
: the phone vibrates.
Single Beep
: the phone beeps once.
SMS Tonex
: the phone uses one of several SMS tones.
SMS-CB Tone
(Menu 6.6.2)
The following options are available for alerting you to new cell
broadcast (CB) messages:
Off
: the phone does not use the CB tone.
Light Only
: the service light flashes.
Vibration
: the phone vibrates.
Single Beep
: the phone beeps once.
SMS-CB Tonex
: the phone uses one of several CB tones.
MMS Tone
(Menu 6.6.3)
The following options are available for alerting you to new
multimedia messages:
Off
: the phone does not use a MMS tone.
Sound Settings
112
Light Only
: the service light flashes.
Vibration
: the phone vibrates.
Single Beep
: the phone beeps once.
MMS Tonex
: the phone uses one of several MMS tones.
Folder Tone
(Menu 6.7)
This menu allows you to select the tone that the phone
sounds when you open or close the phone.
To turn the sound off, select
Off
.
Power On/Off
(Menu 6.8)
This menu allows you to select the melody that the phone
sounds when it is switched on and off.
To turn the sound off, select
Off
.
Extra Tones
(Menu 6.9)
You can customize additional tones used for the phone.
The following options are available:
Error Tone
: sets whether or not the phone informs you when
you have make a mistake.
To turn a given tone Press the
on
Mark
soft key. A check mark displays
in front of the option.
off
Unmark
soft key. The check mark no
longer displays.
Sound Settings
113
Minute Minder
: sets whether or not the phone beeps every
minute during an outgoing call to keep you informed of the
length of your call.
Connect Tone
: sets whether or not the phone to beep when
your call is connected to the system.
Sound Settings
114 Phone Settings
115
Phone Settings
Many different features of your phone can be customized to
suit your preferences. All of these features are accessed in the
Phone Settings
menu.
Display Settings
(Menu 7.1)
In this menu, you can change various settings for the display
or backlight.
Wallpaper
(Menu 7.1.1)
This menu allows you to change the background image or the
color of the text to be displayed in Idle mode.
The following options are available:
Wallpaper
: you can select a background image to be
displayed on the idle screen.
To change the background image:
1. Use the Up or Down key to select the image you want,
then press the
Select
soft key.
You have various preset images available. You can also
select the blank background or any images downloaded for
the Internet, WAP browser and optional EasyGPRS
program or received in messages.
2. Press the
Select
soft key when the image you want
highlights.
3. When the image displays, press the
Select
soft key to
display it on the idle screen.
Text Display
: you can specify whether or not the phone
displays the time and date on the idle screen.
Phone Settings
116
Text Color
: you can select the color of the text to be
displayed on the idle screen.
Front LCD
(Menu 7.1.2)
This menu allows you to adapt the color of external display to
your preference.
Menu Style
(Menu 7.1.3)
This menu allows you to select the menu display style. You
can choose either
Bar Style
or
Page Style
.
Shop Graphics
(Menu 7.1.4)
This menu allows you to access the web site given by your
service provider to download images.
Once you have downloaded images, they are saved in the
Images
folder (
Menu 10.5
).
Back Light
(Menu 7.1.5)
You can select the length of time for which the backlight is on.
The backlight turns on when you press a key or receive a call
or message and remains on for the specified length of time.
Service Light
(Menu 7.1.6)
This menu allows you to select whether or not the service
light is used or in which color it flashes.
Select one from the three color combinations. The service
light flashes in the appropriate color.
If you do not want to use the service light, select
Off
.
Phone Settings
117
Graphic Logo
(Menu 7.1.7)
This menu allows you to display your service provider’s logo
instead of its name.
Off
: the service provider’s name displays in Idle mode.
On
: the service provider’s logo displays in Idle mode; if no
logo has been stored, the service provider’s name displays.
Greeting Message
(Menu 7.2)
This menu allows you to set a greeting to be displayed briefly
when the phone is switched on.
Own Number
(Menu 7.3)
This function is a memory aid, which you can use to check
your own phone number if you need to do so.
You can:
●
assign a name to each of your own phone numbers
registered on your SIM card.
●
edit the names and numbers.
Any changes made here do not in any affect the actual
subscriber numbers on your SIM card.
To Press the
clear the existing message
C
key and hold it down until the
message is cleared.
enter a new message appropriate alphanumeric keys.
change the text input mode right soft key.
Phone Settings
118
Language
(Menu 7.4)
You can select a display language. When the language option
is set to
Automatic
, the language is automatically selected
according to the language of the SIM card used.
Note:
Depending upon your country, service provider or software
version of the phone, the
Automatic
option may not display.
Security
(Menu 7.5)
The Security feature enables you to restrict the use of your
phone to the people and the types of calls of your choice.
Various codes and passwords are used to protect the features
of your phone. They are described in the following sections.
See also pages 159-161.
PIN Check
(Menu 7.5.1)
When the PIN Check feature is enabled, you must enter your
PIN each time you switch the phone on. Consequently, any
person who does not have your PIN cannot use your phone
without your approval.
Note:
Before disabling the PIN Check feature, you must enter your
PIN.
The following options are available:
Disable
: the phone connects directly to the network when
you switch it on.
Enable
: you must enter the PIN each time the phone is
switched on.
Phone Settings
119
Change PIN
(Menu 7.5.2)
This feature allows you to change your current PIN, provided
that the PIN Check feature is enabled. You must enter the
current PIN before you can specify a new one.
Once you have entered a new PIN, you are asked to confirm it
by entering it again.
Phone Lock
(Menu 7.5.3)
When the Phone Lock feature is enabled, the phone is locked
and you must enter the 4 to 8-digit phone password each
time the phone is switched on.
The password is preset to “00000000” at the factory. To
change the phone password, see the
Change Password
menu (
Menu 7.5.4
).
Once the correct password has been entered, you can use the
phone until you switch it off.
The following options are available:
Disable
: you are not asked to enter the phone password
when you switch the phone on.
Enable
: you are required to enter the phone password when
you switch the phone on.
Change Password
(Menu 7.5.4)
The Change Password feature allows you to change your
current phone password to a new one. You must enter the
current password before you can specify a new one.
The password is preset to “00000000” at the factory. Once
you have entered a new password, you are asked to confirm it
by entering it again.
Phone Settings
120
SIM Lock
(Menu 7.5.5)
When the SIM Lock feature is enabled, your phone only works
with the current SIM. You must enter the SIM lock code to
unlock the SIM so you can use a different SIM card.
Once you have entered the lock code, you are asked to
confirm your entry.
FDN Mode
(Menu 7.5.6)
FDN (Fixed Dial Number) mode, if supported by your SIM
card, allows you to restrict your outgoing calls to a limited set
of phone numbers.
The following options are available:
Disable
: you can call any number.
Enable
: you can only call phone numbers stored in Phone
Book. You must enter your PIN2.
Note:
Not all SIM cards have a PIN2. If your SIM card does not, this
menu does not display.
Change PIN2
(Menu 7.5.7)
The Change PIN2 feature allows you to change your current
PIN2 to a new one. You must enter the current PIN2 before
you can specify a new one. Once you have entered a new
PIN2, you are asked to confirm it by entering it again.
Note:
Not all SIM cards have a PIN2. If your SIM card does not, this
menu does not display.
Phone Settings
121
Extra Settings
(Menu 7.6)
You can turn the automatic redialing or answering features on
or off.
The following options are available:
Auto Redial
: when this option is checked, the phone makes
up to ten attempts to redial a phone number after an
unsuccessful call.
Note:
The interval between two call attempts varies.
Open to Answer
: when this option is checked, you can
simply open the phone to answer a call. When it is unchecked,
you must open the phone and press a key to answer a call,
depending on the setting of the
Anykey Answer
option. See
below.
Anykey Answer
: when this option is checked, you can
answer an incoming call by pressing any key, except the
key and the
Reject
soft key. To reject the call, press the
key or the
Reject
soft key.
When this option is unchecked, you can only press the
key or
Accept
soft key.
To turn a feature Press the
on
On
soft key. A check mark displays in
front of the option.
off
Off
soft key. The check mark no longer
displays.
Phone Settings
122
Short Cut
(Menu 7.7)
The Down, Left, and Right key can be used as shortcut keys.
In Idle mode, they allow you to access specific menus directly.
To assign a shortcut to a key:
1. Select the key to be used as a shortcut key by pressing
the Up or Down key, and press the
Select
soft key.
• Key Down
• Key Right
• Key Left
2. Select the menu to be assigned to the key by pressing the
Up or Down key.
Note:
To deactivate a shortcut key, select the
None
option.
3. Press the
Select
soft key to save the selection.
TTY Setting
(Menu 7.8)
TTY, a TDD or Text Telephone, is a telecommunications device
that allows people who are deaf or hard of hearing, or who
have speech or language disabilities, to communicate by
telephone. In this menu, you can enable your phone’s TTY
feature.
The following options are available:
Enable
: allows you to communicate with other TTY users. You
can communicate with other TTY users by connecting certain
portable TTY terminal models to your phone using an optional
adapter.
Disable
: does not allow you to communicate with other TTY
users.
Phone Settings
123
Reset Settings
(Menu 7.9)
You can easily reset your phone to its default settings. To
reset your phone:
1. Select the
Reset Settings
menu.
2. Enter the 4 to 8-digit password and press the
OK
soft key.
Note:
The password is preset to “00000000.” To change this
password, see page 119.
Phone Settings
124
Organizer
125
Organizer
The Organizer feature enables you to:
●
set the alarm so that the phone rings at a specific time,
such as to remind you of an appointment.
●
view the calendar and organize your schedule.
●
set the current time and date.
●
define a list of things to do.
●
record voice memos
●
use the phone as a calculator for basic mathematical
equations or currency exchange operations.
Alarm
(Menu 8.1)
This feature allows you to:
●
set the alarm to ring at a specific time.
●
set the phone to switch on automatically and ring the
alarm even if the phone is switched off.
The following options are available:
Once Alarm
: the alarm rings only once and is then
deactivated.
Daily Alarm
: the alarm rings every day at the same time.
Morning Call
: the alarm rings to wake you up in the
morning.
To set the alarm:
1. Choose the type of alarm to be set and press the
Select
soft key.
2. Enter the time for the alarm to sound.
Organizer
126
Note:
Your phone is preset to use 12-hour format. To change the
time format, see page 130.
If you want to use the alarm options, press the
Options
soft key. The following options are available:
•
Remove Alarm
: deactivates the current alarm.
•
Alarm Tone
: allows you to select an alarm melody.
3. If you select
Morning Call
in step 1, select the repeat
option,
Monday to Friday
or
Monday to Saturday
and
press the
Select
soft key.
4. Select
AM
or
PM
and press the
Select
soft key.
To stop the alarm when it rings, open the phone and press the
Exit
soft key, Volume keys,
C
key, key, or key.
Remove Alarm
: deactivates all alarm settings.
Autopower
: when this option is set to
Enable
, the alarm
rings at the specified time, even if the phone is switched off.
Then the phone turns off.
If the option is set to
Disable
and the phone is switched off at
the specified time, the alarm does not ring.
Organizer
127
Calendar
(Menu 8.2)
With the Calendar feature, you can:
●
consult the calendar.
●
write memos to keep track of your schedule.
●
set an alarm to act as a reminder, if necessary.
Consulting the Calendar
When you select the
Calendar
menu (
Menu 8.2
), the
calendar displays with today’s date highlighted. The following
options are available when you press the
Options
soft key:
Search All
: displays all memos set, starting with the oldest,
regardless of the day. To scroll through the memos, press the
Up or Down key.
Delete All
: allows you to delete all of the memos. You are
asked to confirm your action.
Go to Date
: allows you to jump to a specific date.
Exit
: exits the Calendar feature and returns to Idle mode.
Writing a Memo
To write or edit a memo on a specific date:
1. Select a date on the calendar, using the Navigation keys.
Note:
To skip to the previous or next month, press the Volume
keys on the left side of the phone.
2. Press the
Select
soft key.
An empty memo screen displays to allow you to enter your
memo.
Organizer
128
3. Enter your memo and then press the
OK
soft key.
Note:
For further details about how to enter characters, see
page 45.
You are asked if you wish to set an alarm.
4. If you want the alarm to ring on the chosen day, press the
Yes
soft key.
Otherwise, press the
No
soft key. The memo is saved and
the display returns to the calendar.
5. If you pressed the
Yes
soft key, set the time for the alarm
and press the
OK
soft key.
Notes:
• Your phone is preset to use 12-hour format. To change the time
format, see page 130.
• When the alarm time you set expires and the alarm rings. To
view details about the memo, press the
View
soft key. To stop
the alarm, press the
Exit
soft key,
C
key, key, or key.
You can also select the melody for the alarm by pressing
the
Melody
soft key.
6. Select
AM
or
PM
and press the
Select
soft key.
The color of the date on the calendar changes to green to
indicate that a memo exists for that date.
viewing a Memo
When you select a day for which a memo already exists on
the calendar, the latest memo for the day displays.
If more than one memo is stored, press the Up or Down key
to scroll to the previous or next memo.
Press the
New
soft key to add a new memo for the day.
Organizer
129
You can use the following options by pressing the
Options
soft key:
Edit
: allows you to change the memo text.
Alarm
: allows you to set the alarm to ring at the specified
time to remind you of the memo. If you set the alarm earlier,
you can change or delete it.
Delete
: deletes the memo.
Copy to
: allows you to copy the memo to another date or
time.
Move to
: allows you to change the time or date of the memo.
Time & Date
(Menu 8.3)
This menu allows you to change the current time and date
displayed. You can also find out what time it is in another part
of the word.
The following options are available:
Set Time
: allows you to enter the current time. You can
choose the time format in the
Time Format
menu (
Menu
8.3.4
).
Note:
Before setting the time, you must specify your time zone in the
World Time
menu (
Menu 8.3.3
).
Set Date
: allows you to enter the month, day and year.
World Time
: allows you to find out what time it is another
part of world, using the Left and Right keys.
Organizer
130
The screen shows the:
●
city name.
●
current date and time.
●
time difference between the selected city and your city if
you have set the local time (see below for further details).
●
city selected as your time zone.
To select your time zone:
1. Select the city corresponding to your time zone by
pressing the Left or Right key one or more times. The local
date and time display.
2. Press the
Set
soft key.
Time Format
: allows you to change the time format to
24
Hours
or
12 Hours
.
Set Time From Network
: allows you to receive time
information from your service provider’s network.
Manual: you need to manually set the time and date
according to the current time zone using the
Set Time
menu
(
Menu 8.3.1
).
Auto: the phone automatically updates the time and date
according to the current time zone using the network service.
Confirm First: the phone asks for a confirmation before the
update.
Note:
Automatic updates of time and date does not change the time
you have set for alarm settings or calendar memos.
Organizer
131
Calculator
(Menu 8.4)
With this feature, you can use the phone as a calculator. The
calculator provides the basic arithmetic functions; addition,
subtraction, multiplication and division.
1. Enter the first number using the numeric keys.
Note:
To include a decimal point or a bracket, press the left soft
key until the symbol you want displays.
2. Press the right soft key until the symbol you want
displays:
+
(addition),
-
(subtraction),
*
(multiplication),
/
(division).
3. Enter the second number.
4. To view the result, press the key.
5. Repeat steps 1 to 4 as many times as required.
To Do List
(Menu 8.5)
This feature allows you to:
●
enter a list of tasks to be done.
●
assign a priority and a deadline to each task.
●
sort the tasks by priority and status mark.
Creating the To Do List
1. Press the
New
soft key.
2. Enter the first task.
Note:
For further details about how to enter characters, see
page 45.
Organizer
132
3. Press the
OK
soft key.
4. Select high, normal or low priority using the Up or Down
key and press the
Select
soft key.
5. Enter your deadline and press the
OK
soft key.
If you do not want to set a deadline, press the
Skip
soft
key.
Editing the To Do List
When you select the
To Do List
menu (
Menu 8.5
), the
current contents display with a status mark. If the task has
been done, and priority; for High, for Normal and
for Low.
Action Procedure
View the details for a
specific task
➀
Highlight the task.
➁
Press the
View
soft key.
➂
Scroll through the tasks using the Up
and Down keys.
Change the status of a
specific task
➀
Highlight the task.
➁
Press the key to mark the task as
completed as of the current time and
date.
or
➀
Highlight the task.
➁
Press the
Options
soft key.
➂
Select the
Mark
option.
➃
Select the appropriate status (
Done
or
Undo
).
Create a new task
➀
Press the
Options
soft key.
➁
Select the
New
option.
➂
Enter text, priority and deadline for
the task.
Organizer
133
Voice Memo
(Menu 8.6)
You can record voice memos. After recording, you can send
the memo to other people using the Multimedia Message
Service.
Edit an existing task
➀
Highlight the task.
➁
Press the
Options
soft key.
➂
Select the
Edit
option.
➃
Change the text, priority and/or
deadline for the task.
Sort the existing tasks
by priority or status
➀
Press the
Options
soft key.
➁
Select the
Sort
option.
➂
Select the sort criterion (
High
,
Low
,
Done
or
Undo
).
Copy a task
➀
Highlight the task.
➁
Press the
Options
soft key.
➂
Select the
Copy
option.
➃
Change the text, priority and/or
deadline for the task.
Copy a task to the
calendar
➀
Highlight the task.
➁
Press the
Options
soft key.
➂
Select the
Copy to Calendar
option.
➃
Change the text and/or deadline for
the task and set the alarm.
Delete a task
➀
Highlight the task.
➁
Press the
Options
soft key.
➂
Select the
Delete
option.
Delete all tasks
➀
Press the
Options
soft key.
➁
Select the
Delete All
option.
➂
Confirm the deletion by pressing the
OK
soft key.
Exit the To do list
➀
Press the
Options
soft key.
➁
Select the
Exit
option.
Action Procedure
(Continued)
Organizer
134
Record
(Menu 8.6.1)
This menu allows you to record a new memo. When you select
this option, the display shows the 30-second timer.
1. To start recording, press the
Record
soft key.
2. Record a memo by speaking into the microphone.
3. When you press the
Stop
soft key, or if the recording time
expires, the following options display:
•
Replay
: plays back your memo.
•
Re-record
: discards the memo and enables you to
record another one.
•
Save
: allows you to save the memo.
•
Quit
: cancels your recording and exits the Record menu.
4. To save the memo, choose
Save
from the options and
press the
Select
soft key.
5. Press the
C
key to clear the default name, if necessary,
and enter a name for the memo.
For further details about how to enter characters, see
page 45.
6. Press the
OK
soft key.
The memo is saved and then the display shows the memo
information.
7. Press the
Options
soft key to use the following memo
options:
•
Send
: allows you to send the memo to other people by
using the MMS feature. Follow the procedure on
page 80.
•
Rename
: allows you to change the memo’s name.
Organizer
135
•
Delete
: deletes the memo.
8. To exit, press the or key.
Voice Memo List
(Menu 8.6.2)
This menu shows your voice memo list. Scroll to a memo and
press the
Options
soft key. The following options are
available:
Play
: plays the memo.
Send
: allows you to send the memo to other people by using
the MMS feature. See page 80 for further details about
sending a message.
Rename
: allows you to change the memo’s name.
Information
: displays information about the memo, such as
the name, date when the memo was made, recording
duration and memory size.
Delete
: deletes the memo.
Delete All
(Menu 8.6.3)
In this menu, you can delete all of your voice memos.
When the confirmation message appears, press the
Yes
soft
key. To cancel the deletion, press the
No
soft key.
Memory Status
(Menu 8.6.4)
You can check the amount of the memory for voice memos.
The display shows you the total space, including used and
free space.
Organizer
136
Currency Exchange
(Menu 8.7)
Using this menu, you can figure currency conversions.
1. Enter the current exchange rate of your source currency
and press the
OK
soft key.
You can insert a decimal point by pressing the key.
2. Enter the amount to convert and press the
OK
soft key.
The amount you entered and its equivalent value display.
3. Press the
Exit
soft key to exit the currency converter.
Network Services
137
Network Services
These menu functions are network services. Please contact
your service provider to check their availability and subscribe
to them, if you wish.
Call Forwarding
(Menu 9.1)
This network service enables incoming calls to be rerouted to
the number that you specify.
Example:You may wish to forward your business calls to a
colleague while you are on holiday.
You can use the following options to forward voice calls and/or
data calls:
Forward Always
: all calls are forwarded.
Busy
: calls are forwarded when you are already on another
call.
No Reply
: calls are forwarded when you do not answer the
phone.
Unreachable
: calls are forwarded when you are not in an
area covered by your service provider.
Cancel All
: all call forwarding options are canceled.
To set your call forwarding options:
1. Select a call forwarding option by pressing the Up or Down
key and then press the
Select
soft key.
2. Select the type of calls, voice or data, by pressing the Up
or Down key, and then press the
Select
soft key.
The current status displays. If the option has already been
set, the number to which the calls are forwarded displays.
Network Services
138
4. Enter the number to which the calls are to be forwarded
and press the
OK
soft key.
To enter an international code, press the
0
key until the
+
sign displays.
The phone sends your settings to the network and the
network’s acknowledgement displays.
You can deactivate all call forwarding settings by selecting the
Cancel All
option.
Call Barring
(Menu 9.2)
The call barring network service allows you to restrict your
calls.
You can use the following options to restrict voice and/or data
calls:
All Outgoing
: calls cannot be made.
International
: international calls cannot be made.
International Except to Home
: when abroad, calls can be
made only to numbers within the current country and to your
home country, which is the country where your home network
provider is located.
3.
To Press the
activate call forwarding
Activate
soft key. Go to step 4.
change the number to be
called
Change
soft key. Go to step 4.
deactivate call forwarding
Remove
soft key.
Network Services
139
All Incoming
: calls cannot be received.
Incoming While Abroad
: calls cannot be received when you
are using your phone outside of your home service area.
Cancel All
: all call barring settings are deactivated; calls can
be made and received normally.
To set your call barring options:
1. Select a call barring option by pressing the Up or Down
key and then press the
Select
soft key.
2. Select the type of calls, voice or data, by pressing the Up
or Down key and then press the
Select
soft key.
3. Press the
Activate
soft key to confirm your settings.
4. Enter your call barring password supplied by your service
provider.
The phone sends your settings to the network and the
network’s acknowledgement displays.
To deactivate specific call barring settings:
1. Select the call barring option to be deactivated.
2. Select the type of calls to which this option applies.
3. Press the
Deactivate
soft key.
4. Enter your call barring password supplied by your service
provider.
The phone sends your settings to the network and the
network’s acknowledgement displays
You can also deactivate all call barring settings by selecting
the
Cancel All
option.
Network Services
140
Change Barring Password
: you can set and change the call
barring password obtained from your service provider using
this option. You must enter the current password before you
can specify a new one.
Once you have entered a new password, you are asked to
confirm it by entering it again.
Call Waiting
(Menu 9.3)
This network service informs you when someone is trying to
reach you during another call.
You can specify individual call waiting options for voice calls
and/or data calls.
To set your call waiting options:
1. Select the type of calls, voice or data, to which the call
waiting option is to be applied by pressing the Up or Down
key and then press the
Select
soft key.
The screen informs you whether call waiting is activated or
deactivated.
2. You can activate or deactivate the call waiting feature
using the
Activate
or
Deactivate
soft key respectively.
To return to the previous screen, press the
Exit
soft key.
You can also deactivate all call waiting settings by selecting
the
Cancel All
option.
Network Services
141
Network Selection
(Menu 9.4)
The Network Selection feature enables you to automatically or
manually select the network used when roaming outside of
your home area.
Note:
You can select a network other than your home network only if
there is a valid roaming agreement between them.
To indicate to automatically or manually select the network
when roaming:
1. When
Network Selection
displays, press the
Select
soft
key.
2. Press the Up or Down key until the appropriate option
highlights, then press the
OK
soft key.
If you select
Automatic
, you are connected to the first
available network when roaming.
If you select
Manual
, the phone scans for the available
networks. Go to Step 3.
3. Press the Up or Down key until the network you want
highlights and then press the
OK
soft key.
You are connected to that network.
Network Services
142
Caller ID
(Menu 9.5)
You can prevent your phone number from being displayed on
the phone of the person being called.
Note:
Some networks do not allow you to change this setting.
The following options are available:
Default
: the default setting provided by the network is used.
Hide Number
: your number does not display on the other
person’s phone.
Send Number
: your number is sent each time you make a
call.
Closed User Group (CUG)
(Menu 9.6)
This network service allows incoming and outgoing calls to be
restricted to a selected user group. You can create up to ten
user groups.
For details on how to create and use a closed user group,
contact your service provider.
Example: A company lends SIM cards to its employees and
wants to restrict outgoing calls to members of the
same team.
Activating a Closed User Group
If you select the
Closed User Group
menu, you can enter
the CUG function. You can now access the following options
after pressing the
Select
soft key:
Index List
: lets you list, add or delete CUG index numbers.
The list of current CUG indexes appears. Add a new CUG
index as advised by your service provider or delete a selected
group.
Network Services
143
Outside Access
: lets you enable or disable calls to numbers
other than those in the Closed User Group. This feature
depends on the nature of your CUG subscription. Please check
with your service provider.
Default Group
: you may set a default CUG with your service
provider. If you have done so, you can enable the
Default
Group
option on your phone. When making a call, you are
given the option of using your default CUG, instead of
selecting one from the list.
Deactivate
: deactivates the CUG function. This option
appears only when the default group is enabled or a CUG
index is selected.
To Press the
scroll through the
existing CUG indexes Up or Down key.
add a new CUG index
Options
soft key, select the
Add
option and enter the index.
delete a CUG index
Options
soft key and select the
Delete
option.
activate a CUG index
Options
soft key and select the
Activate
option.
Network Services
144 Funbox
145
Funbox
The Funbox menu contains several fun options.
WAP Browser
(Menu 10.1)
Your phone is equipped with a WAP (Wireless Application
Protocol) browser to allow you to access and navigate the
Wireless Web using your phone.
Home
(Menu 10.1.1)
Selecting this menu connects the phone to the network and
loads the homepage of the Wireless Web service provider. You
can also press the key in Idle mode.
The content of the WAP Browser startup homepage depends
on your Wireless Web service provider. To scroll through the
screen, use the Up and Down keys.
Note:
To access the startup homepage from any other screen in the
WAP Browser, use the
Home
option. For more information on
the WAP Browser menus, see page 147.
Exiting the WAP Browser
To exit the browser at any time, simply press the key or
press and hold the key.
Funbox
146
Navigating the WAP Browser
Entering Text in the WAP Browser
When you are prompted to enter text, the current text input
mode is indicated on the screen.
The following modes are available:
Upper-case Character Mode
(
A
): allows you to enter
upper-case English characters.
Lower-case Character Mode
(
a
): allows you to enter lower-
case English characters.
Note:
You can enter symbols in upper or lower-case character mode
by pressing the
1
key.
Number
Mode
(
1
): allows you to enter numbers.
To Press the
scroll through and select
browser items Up or Down key until the symbol
points to the required item, and then
press the
OK
soft key to confirm the
selection.
select a numbered item corresponding numeric key.
return to the previous
page
Back
soft key or the
C
key.
return to the startup
homepage key and select the
Home
menu.
For further details about this option,
see page 147.
Funbox
147
Selecting and Using Menu Options
Various menus are available when you are using the WAP
Browser to navigate the Wireless Web.
To access a menu option:
1. Press and hold down the key.
A menu displays.
2. Highlight a menu by pressing the Up and Down keys.
3. Select the option by pressing the
Select
soft key.
4. If necessary, select a secondary option using the Up and
Down keys, and press the
Select
soft key to confirm.
Note:
The menus may vary, depending on your version of the WAP
Browser.
The following options are available:
Reload
: reloads the current page.
Home
: takes you back at any time to the homepage of the
Wireless Web service provider.
Goto URL
: allows you to manually enter the URL address of a
Web page. After entering an address, press the
OK
soft key to
go there directly.
To change the text
input mode Press the key one or more times.
To enter a space Press the key.
To edit text
➀
Set the cursor to the right of the
character(s) to be corrected.
➁
Press the
C
key as required.
➂
Enter the correct character(s).
Funbox
148
Show URL
: displays the URL address of the site to which you
are currently connected. It also enables you to declare the
current site as the startup homepage.
Edit Home
: allows you to change the startup homepage
manually. Enter the required URL and press the
OK
soft key.
For more information about entering text, see page 146.
Favorites
(Menu 10.1.2)
This menu stores up to 10 URL addresses of the web site
given by your service provider.
Using this menu, you can access one of the default web sites
or stores up to 6 addresses of your favorite web site.
To access a web site, select one from the list and press the
key.
To store a URL address:
1. Select an empty location and press the
Options
soft key.
2. Enter the address and press the
Enter
soft key.
Note:
For further details about how to enter characters, see
page 45.
To Press the
declare the current page
as your startup homepage
Option
soft key, select the
Save
to home
option and press the
Select
soft key.
set a bookmark for the
current page
Option
soft key, select the
Save
to bookmark
option and press the
Select
soft key.
cancel your setting
Back
soft key.
Funbox
149
3. Enter a name for the favorite item and press the
Enter
soft key.
After saving favorite items, you can use the following options
by pressing the
Options
soft key:
Goto URL
: takes you to the site.
Edit
: allows you to edit the address.
Delete
: deletes the address.
http://
(Menu 10.1.3)
This menu allows you to manually enter the URL address of
the web site that you wish to access. You can access this
menu directly by pressing and holding the key in the WAP
browser.
For further details about entering characters, see page 45.
Settings
(Menu 10.1.4)
This option allows you to set up five proxy servers for the
WAP browser. Contact your service provider for details.
For each server, the following options are available:
Profile Name
: enter a name that you wish to assign to the
HTTP proxy server.
Homepage URL
: set the address of your startup homepage.
When the default homepage displays, you can delete it using
the
C
key and enter your own choice.
Security
: set the data transmission mode. Choose
Secure
to
protect your data against unauthorized access; otherwise,
choose
Non-Secure
.
Funbox
150
Bearer
: select the bearer to be used for each type of network
address accessed:
GPRS
or
Data
. The remaining options
depend on the Bearer setting.
When the bearer is set to
GPRS
:
IP Address
: enter the WAP gateway address required to
connect to the Internet.
User Name
: enter the User ID required to connect to the
GPRS network.
Password
: enter the password required to connect to the
GPRS network.
APN
: enter the access point name used for the address of the
GPRS network gateway.
When the bearer is set to
Data
:
IP Address
: enter the WAP gateway address required to
connect to the Internet.
Login Name
: enter the PPP server login ID.
Password
: enter the PPP server password.
Dial-up Number
: enter the PPP server phone number.
Data Call Type
: select a data call type:
Analogue
or
ISDN
.
Note:
The WAP Browser settings may vary, depending on the service
provider. Contact your service provider for further information.
Clear Cache
(Menu 10.1.5)
You can clear the information stored in the cache, which is the
phone’s temporary memory which stores the most recently
accessed Web pages.
Press the
Yes
soft key to confirm the deletion. Otherwise,
press the
No
soft key.
Funbox
151
Push Message
(Menu 10.1.6)
This menu allows you to receive web messages from the
server, or to set the phone not to receive Web messages.
The following options are available:
Inbox
: allows you to read the messages received from the
web server.
Receive
: allows you to set whether or not your phone
receives web messages.
Delete All
: allows you to delete all of the web messages.
Shop Games
(Menu 10.2)
This menu allows you to access the web site given by your
service provider to download games.
Once you have downloaded games, they are saved in the
Games
menu (
Menu 10.3
).
Games
(Menu 10.3)
You can download MIDlets (Java applications running on
mobile phones) from various sources using the WAP Browser
and store them in your phone.
When you access the
Games
menu, the list of the default
games appears. Once you have downloaded games, they are
added to the list.
Note:
Java services may not be available, depending upon your
service provider.
Funbox
152
Launching a MIDlet
Note:
The
procedure explained below is for the default games. For
downloaded games, the procedure may be different.
1. Scroll to the MIDlet you want on the Games list and press
the
Launch
soft key.
2. On the startup screen of the MIDlet, scroll to an option
using the Navigation keys.
The following options are available:
•
START GAME
: starts a new game.
•
CONTINUE
: allows you to continue the last game you
played.
•
HIGH SCORE
: shows the high score table. This option
may not be available for some games.
•
HOW TO PLAY
: shows how to play the game and the
key functions for the game.
•
OPTION
: allows you to switch the game sound on or off.
3. Press the key to confirm your selection.
While you are playing a game, to Press the
adjust the sound volume Volume keys.
stop the game and return to the
startup screen
C
key.
exit the game key.
Funbox
153
Viewing MIDlet Information
1. Scroll to the MIDlet you want and press the
Info
soft key.
The display shows information about the MIDlet, such as
the file size, application version and its vendor.
2. To scroll to other MIDlet information, press the Navigation
keys.
3. If you want to delete the MIDlet, press the
Delete
soft key
and then press the
Yes
soft key to confirm the deletion.
Note
: When you select the default games from the list, the
Delete
option is not available, so that you cannot delete them.
4. To exit and return to the Games list, press the
Back
soft
key or the
C
key.
Entering Text
If you need to enter text while using a MIDlet, you can use
the following input modes:
Upper-case Character Mode
(
A
): allows you to enter
upper-case English characters.
Lower-case Character Mode
(
a
): allows you to enter lower-
case English characters.
Number Mode
(
1
): allows you to enter numbers.
Symbol Mode
: allows you to enter symbols. After
highlighting a symbol by pressing the Navigation keys, press
the key to insert it.
T9 Mode
(
T9
): allows you to enter English characters by
pressing one key per letter. In this mode, you can change the
case by pressing the
0
key.
To change the text input mode, press the key until the
appropriate indicator appears on the soft key area of the
display.
Funbox
154
Sounds
(Menu 10.4)
In this menu, you can view the list of sounds downloaded
from the web server or received in multimedia messages. You
can set the downloaded sounds as the current ring tone or
send them to other phones.
When memory is full, a warning message displays and the
phone rejects additional sounds until you erase obsolete ones.
By pressing the
Options
soft key, you can use the following
options:
Rename
: allows you to change the name of the sound.
Delete
: deletes the sound.
Set as Ring Tone
: sets the sound as your ring tone.
Images
(Menu 10.5)
In this menu, you can view the list of pictures downloaded
from the web server or received in messages. You can set the
downloaded pictures as the current background image or
send them to other phones.
When memory is full, a warning message displays and the
phone rejects additional sounds until you erase obsolete ones.
Press the
Options
soft key to use the following options:
Rename
: allows you to change the name of the image.
Delete
: deletes the image.
Set as Wallpaper
: sets the image as your wallpaper for the
idle screen.
Funbox
155
Delete All
(Menu 10.6)
This menu allows you to delete all of the downloaded items in
the Games, Sounds and Images folders. You can delete all of
the items at one time.
When a confirmation message displays, press the
Yes
soft
key to confirm.
Memory Status
(Menu 10.7)
You can check the amount of the memory being used and the
memory remaining for games or sounds and images.
Games
: The display shows the total, used, and free space
and the number of games you downloaded.
Sounds & Images
: The display shows the total, used and
free space, including each space used for voices, and sounds
and images.
To Press the
select a folder to clear Up or Down key. To delete all of
your items, select
All
.
place a check mark
Mark
soft key.
remove a check mark
Unmark
soft key.
delete the marked items
Delete
soft key.
Solving Problems
156
Solving Problems
If you are experiencing problems with your phone, perform
the following simple checks before contacting a service
professional. This may save you the time and expense of an
unnecessary service call.
When you switch your phone on, the following
messages may appear
Insert SIM Card
●
Check that the SIM card is correctly installed.
Phone Locked Enter Password
●
The automatic locking function has been enabled. You
must enter the phone’s password before you can use the
phone.
Enter PIN
●
You are using your phone for the first time. You must enter
the Personal Identification Number supplied with the SIM
card.
●
The PIN Check feature is enabled. Every time the phone is
switched on, the PIN has to be entered. To disable this
feature, use the
PIN Check
menu (
Menu 7.5.1
).
Enter PUK
●
The PIN code was entered incorrectly three times in
succession and the phone is now blocked. Enter the PUK
supplied by your service provider.
Solving Problems
157
“No Service,” “Network Failure” or “Not Done”
displays
●
The network connection was lost. You may be in a weak
signal area (in a tunnel or surrounded by buildings). Move
and try again.
●
You are trying to access an option for which you have not
taken out a subscription with your service provider.
Contact the service provider for further details.
You have entered a number but it was not dialed
●
Have you pressed the key?
●
Are you accessing the right cellular network?
●
You may have set an outgoing call barring option.
Your correspondent cannot reach you
●
Is your phone switched on (the key pressed for more
than one second)?
●
Are you accessing the right cellular network?
●
You may have set an incoming call barring option.
Your correspondent cannot hear you speaking
●
Have you switched off the microphone?
●
Are you holding the phone close enough to your mouth?
The microphone is located at the bottom of the phone.
The phone starts beeping and “**Warning** Low
Battery” flashes on the display
●
The battery is insufficiently charged. Recharge the battery.
Solving Problems
158
The audio quality of the call is poor
●
Check the signal strength indicator on the display ( );
the number of bars indicates the signal strength from
strong ( ) to weak ( ).
●
Try moving the phone slightly or moving closer to a
window if you are in a building.
No number is dialed when you recall a
Phonebook entry
●
Check that the number has been stored correctly, by using
the Phonebook Search feature.
●
Re-store the number, if necessary.
If the above guidelines do not help you to solve the
problem, take a note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
Access Codes
159
Access Codes
There are several access codes that are used by your phone
and its SIM card. These codes help you protect the phone
against unauthorized use.
When requested for any of the codes explained below, enter
the appropriate code (displayed as asterisks) and press the
OK soft key. If you make a mistake, press the
C
key until the
incorrect digit is cleared and then continue entering the
correct code.
The access codes, except for the PUK and PUK2 codes can be
changed using the
Security
menu (
Menu 7.5
). See page 118
for further details.
Important!
Avoid using access codes resembling emergency
numbers, such as 911, to prevent accidental
dialing of an emergency number.
Phone Password
The Phone Lock feature uses the phone password to protect
your phone against unauthorized use. The phone password is
supplied with the phone and is preset to “00000000” at the
factory.
To See
activate/deactivate the Phone
Lock feature page 119 (
Menu 7.5.3
).
change the phone password page 119 (
Menu 7.5.4
).
Access Codes
160
PIN
The Personal Identification Number or PIN (4 to 8 digits)
protects your SIM card against unauthorized use. It is usually
supplied with the SIM card.
If you enter an incorrect PIN three times in succession, the
code is disabled and cannot be used until you re-enable it by
entering the PUK. See below.
PUK
The 8-digit PUK (PIN Unblocking Key) is required to change a
disabled PIN. The PUK may be supplied with the SIM card. If
not, contact your service provider.
To re-enable your PIN:
1. Enter the PUK and press the
OK
soft key.
2. Enter a PIN of your choice and press the
OK
soft key.
3. When the Confirm New PIN message displays, enter the
same code again and press the
OK
soft key.
When you enter an incorrect PUK ten times in succession, the
SIM card becomes invalid. Contact your service provider for a
new card.
To See
activate/deactivate the PIN
Check feature page 118 (
Menu 7.5.1
).
change the PIN page 119 (
Menu 7.5.2
).
Access Codes
161
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM cards, is
required to access specific functions, such as setting the
maximum cost of a call. These functions are available if
supported by your SIM card.
If you enter an incorrect PIN2 three times in succession, the
code is disabled and you cannot access the functions until you
re-enable it by entering the PUK2.
To change the PIN2, see page 120 (
Menu 7.5.7
).
PUK2
The 8-digit PUK2 (PIN Unblocking Key 2), supplied with some
SIM cards, is required to change a disabled PIN2. If you lose
the code, contact your service provider.
To re-enable your PIN2:
1. Enter the PUK2 and press the
OK
soft key.
2. Enter a new PIN2 of your choice and press the
OK
soft
key.
3. When the Confirm PIN2 message displays, enter the same
code again and press the
OK
soft key.
When you enter an incorrect PUK2 ten times in succession,
you are not able to access the functions requiring the PIN2.
Contact your service provider for a new card.
Health and Safety Information
162
H
ealth and Safety
Information
Exposure to Radio Frequency (RF) Signals
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits
for exposure to radio frequency (RF) energy set by the
Federal Communications Commission (FCC) of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on the safety
standards that were developed by independent scientific
organizations through periodic and through evaluation of
scientific studies.
The standards include a substantial safety margin designed to
assure the safety of all persons, regardless of age and health.
The exposure standard for wireless phones employs a unit of
measurement known as Specific Absorption Rate (SAR). The
SAR limit recommended by the FCC is 1.6W/kg.
*
* In the U.S. and Canada, the SAR limit for mobile phones used
by the public is 1.6 watts/kg (W/kg) averaged over one gram of
tissue. The standard incorporates a substantial margin of safety
to give additional protection for the public and to account for
any variations in measurements.
Health and Safety Information
163
SAR tests are conducted using standard operating positions
specified by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although
the SAR is determined at the highest certified power level, the
actual SAR level of the phone while operating can be well
below the maximum value. This is because the phone is
designed to operate at multiple power levels so as to use only
the power required to reach the network. In general, the
closer you are to a wireless base station antenna, the lower
the power output of the phone.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not
exceed the limit established by the government adopted
requirement for safe exposure. The tests are performed in
positions and locations (e.g., at the ear and worn on the
body) as required by the FCC for each model. While there
may be differences between the SAR levels of various phones
and at various positions, they all meet the government
requirement.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC and
can be found under the Display Grant section of http://
www.fcc.gov/oet/fccid after searching on FCC ID printed in
the label on the phone.
FCC certification information for this model phone is attached
separation paper.
Health and Safety Information
164
For Body Operation
This device was tested for typical body-worn operations with the
back of the phone kept 1.5 cm. from the body. To maintain
compliance with FCC RF exposure requirements, use only belt-
clips, holsters or similar accessories that maintain a 1.5 cm.
separation distance between the user's body and the back of
the phone, including the antenna. The use of belt-clips,
holsters and similar accessories should not contain metallic
components in its assembly. The use of accessories that do
not satisfy these requirements may not comply with FCC RF
exposure requirements, and should be avoided.
For more Information concerning exposure to radio frequency
signals, see the following websites:
Federal Communications Commission (FCC)
http://www.fcc.gov
Cellular Telecommunications Industry Association (CTIA):
http://www.wow-com.com
U.S.Food and Drug Administration (FDA)
http://www.fda.gov/cdrh/consumer
World Health Organization (WHO)
http://www.who.int/peh-emf/en
Health and Safety Information
165
Precautions When Using Batteries
●
Never use any charger or battery that is damaged in any
way.
●
Use the battery only for its intended purpose.
●
If you use the phone near the network’s base station, it
uses less power; talk and standby time are greatly affected
by the signal strength on the cellular network and the
parameters set by the network operator.
●
Battery charging time depends on the remaining battery
charge, the type of battery and the charger used. The
battery can be charged and discharged hundreds of times,
but it will gradually wear out. When the operation time
(talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
●
If left unused, a fully charged battery will discharge itself
over time.
●
Use only Samsung-approved batteries and recharge your
battery only with Samsung-approved chargers. When a
charger is not in use, disconnect it from the power source.
Do not leave the battery connected to a charger for more
than a week, since overcharging may shorten its life.
●
Extreme temperatures will affect the charging capacity of
your battery: it may require cooling or warming first.
●
Do not leave the battery in hot or cold places, such as in a
car in summer or winter conditions, as you will reduce the
capacity and lifetime of the battery. Always try to keep the
battery at room temperature. A phone with a hot or cold
battery may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly affected by
temperatures below 0 °C (32 °F).
Health and Safety Information
166
●
Do not short-circuit the battery. Accidental short-circuiting
can occur when a metallic object (coin, clip or pen) causes
a direct connection between the + and – terminals of the
battery (metal strips on the battery), for example when
you carry a spare battery in a pocket or bag. Short-
circuiting the terminals may damage the battery or the
object causing the short-circuiting.
●
Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of batteries in
a fire.
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When
using your wireless phone behind the wheel of a car, practice
good common sense and remember the following tips:
●
Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the
road.
●
When available, use a hands-free device. If possible, add
an extra layer of convenience and safety to your wireless
phone with one of the many hands-free accessories
available today.
●
Position your wireless phone within easy reach. Be able to
access your wireless phone without removing your eyes
from the road. If you get an incoming call at an
inconvenient time, let your voice mail answer it for you.
●
Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
Health and Safety Information
167
hazardous weather conditions. Rain, sleet, snow, ice and
even heavy traffic can be hazardous.
●
Do not take notes or look up phone numbers while driving.
Jotting down a To Do list or flipping through your
phonebook takes your attention away from your primary
responsibility, driving safely.
●
Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try
to plan calls when your car will be stationary. If you need
to make a call while moving, dial only a few numbers,
check the road and your mirrors, then continue.
●
Do not engage in stressful or emotional conversations that
may be distracting. Make the people with whom you are
talking aware that you are driving and suspend
conversations that have the potential to divert your
attention from the road.
●
Use your wireless phone to call for help. Dial the
emergency number in the case of fire, traffic accident or
medical emergencies. Remember, it is a free call on your
wireless phone!
●
Use your wireless phone to help others in emergencies. If
you see a car accident, crime in progress or other serious
emergency where lives are in danger, call the emergency
number, as you would want others to do for you.
●
If you see a broken-down vehicle posing no serious hazard,
a broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen,
call roadside assistance or any other special non-
emergency wireless number.
Health and Safety Information
168
Operating Environment
Remember to follow any special regulations in force in any
area and always switch your phone off whenever it is
forbidden to use it, or when it may cause interference or
danger.
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety instructions.
Do not connect incompatible products.
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment
and for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating
position (held to your ear with the antenna pointing over your
shoulder).
Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are
consistent with the independent research and
recommendations of Wireless Technology Research.
Persons with pacemakers:
●
should always keep the phone more than 15 cm (6 inches)
from their pacemaker when the phone is switched on.
Health and Safety Information
169
●
should not carry the phone in a breast pocket.
●
should use the ear opposite the pacemaker to minimize
potential interference.
If you have any reason to suspect that interference is taking
place, switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with some hearing
aids. In the event of such interference, you may wish to
consult your hearing aid manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able
to assist you in obtaining this information. Switch your phone
off in health care facilities when any regulations posted in
these areas instruct you to do so. Hospitals or health care
facilities may be using equipment that could be sensitive to
external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that
has been added to your vehicle. You should also consult the
manufacturer of any equipment that has been added to your
vehicle.
Health and Safety Information
170
Posted Facilities
Switch your phone off in any facility where posted notices
require you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire resulting
in bodily injury or even death.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to
observe restrictions on the use of radio equipment in fuel
depots (fuel storage and distribution areas), chemical plants
or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often but
not always clearly marked. They include the areas below deck
on boats, chemical transfer or storage facilities, vehicles using
liquefied petroleum gas (such as propane or butane), areas
where the air contains chemicals or particles, such as grain,
dust or metal powders, and any other area where you would
normally be advised to turn off your vehicle engine.
Health and Safety Information
171
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee connection in
all conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal
strength. Emergency calls may not be possible on all wireless
phone networks or when certain network services and/or
phone features are in use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press the key.
If certain features are in use (call barring, for example), you
may first need to deactivate those features before you can
make an emergency call. Consult this document and your
local cellular service provider.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember
that your phone may be the only means of communication at
the scene of an accident; do not cut off the call until given
permission to do so.
Health and Safety Information
172
Other Important Safety Information
●
Only qualified personnel should service the phone or install
the phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to
the device.
●
Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.
●
Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts
or accessories.
●
For vehicles equipped with an air bag, remember that an
air bag inflates with great force. Do not place objects,
including both installed or portable wireless equipment in
the area over the air bag or in the air bag deployment
area. If wireless equipment is improperly installed and the
air bag inflates, serious injury could result.
●
Switch your phone off before boarding an aircraft. The use
of wireless phones in aircraft is illegal and may be
dangerous to the aircraft’s operation.
●
Failure to observe these instructions may lead to the
suspension or denial of telephone services to the offender,
or legal action, or both.
Health and Safety Information
173
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will
help you fulfill any warranty obligations and allow you to
enjoy this product for many years:
●
Keep the phone and all its parts and accessories out of the
reach of small children’s.
●
Keep the phone dry. Precipitation, humidity and liquids
contain minerals that will corrode electronic circuits.
●
Do not use the phone with a wet hand. Doing so may
cause an electric shock to you or damage to the phone.
●
Do not use or store the phone in dusty, dirty areas, as its
moving parts may be damaged.
●
Do not store the phone in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
●
Do not store the phone in cold areas. When the phone
warms up to its normal operating temperature, moisture
can form inside the phone, which may damage the phone’s
electronic circuit boards.
●
Do not drop, knock or shake the phone. Rough handling
can break internal circuit boards.
●
Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth
slightly dampened in a mild soap-and-water solution.
●
Do not paint the phone. Paint can clog the device’s moving
parts and prevent proper operation.
●
Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may
explode when overheated.
●
Use only the supplied or an approved replacement
antenna. Unauthorized antennas or modified accessories
Health and Safety Information
174
may damage the phone and violate regulations governing
radio devices.
●
If the phone, battery, charger or any accessory is not
working properly, take it to your nearest qualified service
facility. The personnel there will assist you, and if
necessary, arrange for service.
Acknowledging Special Precautions and
the FCC and Industry Canada Notice
Cautions
Modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the
equipment.
FCC Compliance Information
This device complies with Part 15 of FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received.
Including interference that may cause undesired operation.
Health and Safety Information
175
Information to User
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment and
receiver.
●
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
●
Consult the dealer or an experienced radio/ TV technician
for help.
Health and Safety Information
176
Appendix A: CERTIFICATION INFORMATION
(SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits
for exposure to radio frequency (RF) energy set by the
Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on safety
standards that were developed by independent scientific
organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety
margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile phones employs a
unit of measurement known as the Specific Absorption Rate
(SAR). The SAR limit set by the FCC is 1.6 W/kg. SAR Tests
are conducted using standard operating positions accepted by
the FCC with the phone transmitting at its highest certified
power level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are
to a wireless base station antenna, the lower the power
output. requirements, and should be avoided.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not
Health and Safety Information
177
exceed the limit established by the government adopted requirement
for safe exposure. The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by the FCC for each
model.
The highest SAR values of this model phone as reported to FCC are
Head: 1.2W/kg, Body-worn: 0.67W/kg in GSM 850 and Head: 1.37W/kg,
Body-worn: 0.506W/kg in GSM 1900.
To maintain compliance with FCC RF exposure requirements, use only
belt-clips, holsters or similar accessories that maintain a 1.5 cm. separation
distance between the user's body and the back of the phone, including the
antenna. The use of belt-clips, holsters and similar accessories should not
contain metallic components in its assembly. The use of accessories that
do not satisfy these requirements may not comply with FCC RF exposure
The FCC has granted an Equipment Authorization for this model phone
with all reported SAR levels evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this model phone is on file with
the FCC and can be found under the Display Grant section of http://
www.fcc.gov/oet/fccid after searching on FCC ID A3LSGHE317.
In the United States and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kilogram (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial ma
gin of safety to give additional protection for the public and to
account for any variations in measurements.
requirements, and should be avoided.
Health and Safety Information
178
Appendix B: Guide to Safe and Responsible
Wireless Phone Use
Cellular Telecommunications & Internet Association
“Safety is the most important call you will ever make.”
A Guide to Safe and Responsible Wireless Phone Use
TENS OF MILLIONS OF PEOPLE IN THE U.S. TODAY TAKE
ADVANTAGE OF THE UNIQUE COMBINATION OF
CONVENIENCE, SAFETY AND VALUE DELIVERED BY THE
WIRELESS TELEPHONE. QUITE SIMPLY, THE WIRELESS
PHONE GIVES PEOPLE THE POWERFUL ABILITY TO
COMMUNICATE BY VOICE-ALMOST ANYWHERE, ANYTIME-
WITH THE BOSS, WITH A CLIENT, WITH THE KIDS, WITH
EMERGENCY PERSONNEL OR EVEN WITH THE POLICE. EACH
YEAR, AMERICANS MAKE BILLIONS OF CALLS FROM THEIR
WIRELESS PHONES, AND THE NUMBERS ARE RAPIDLY
GROWING.
But an important responsibility accompanies those benefits,
one that every wireless phone user must uphold. When
driving a car, driving is your first responsibility. A wireless
phone can be an invaluable tool, but good judgment must be
exercised at all times while driving a motor vehicle whether
on the phone or not.
The basic lessons are ones we all learned as teenagers.
Driving requires alertness, caution and courtesy. It requires a
heavy dose of basic common sense-keep your head up, keep
your eyes on the road, check your mirrors frequently and
watch out for other drivers. It requires obeying all traffic signs
and signals and staying within the speed limit. It means using
seat belts and requiring other passengers to do the same.
Health and Safety Information
179
But with wireless phone use, driving safely means a little
more. This brochure is a call to wireless phone users
everywhere to make safety their first priority when behind the
wheel of a car. Wireless telecommunications is keeping us in
touch, simplifying our lives, protecting us in emergencies and
providing opportunities to help others in need. When it comes
to the use of wireless phones, safety is your most important
call.
Wireless Phone “Safety Tips”
Below are safety tips to follow while driving and using a
wireless phone which should be easy to remember:
1. Get to know your wireless phone and its features such as
speed dial and redial. Carefully read your instruction
manual and learn to take advantage of valuable features
most phones offer, including automatic redial and memory.
Also, work to memorize the phone keypad so you can use
the speed dial function without taking your attention off
the road.
2. When available, use a hands free device. A number of
hands free wireless phone accessories are readily available
today. Whether you choose an installed mounted device
for your wireless phone or a speaker phone accessory,
take advantage of these devices if available to you.
3. Position your wireless phone within easy reach. Make sure
you place your wireless phone within easy reach and
where you can grab it without removing your eyes from
the road. If you get an incoming call at an inconvenient
time, if possible, let your voice mail answer it for you.
Health and Safety Information
180
4. Suspend conversations during hazardous driving
conditions or situations. Let the person you are speaking
with know you are driving; if necessary, suspend the call
in heavy traffic or hazardous weather conditions. Rain,
sleet, snow and ice can be hazardous, but so is heavy
traffic. As a driver, your first responsibility is to pay
attention to the road.
5. Do not take notes or look up phone numbers while driving.
If you are reading an address book or business card, or
writing a “to do” list while driving a car, you are not
watching where you are going. It’s common sense. Don’t
get caught in a dangerous situation because you are
reading or writing and not paying attention to the road or
nearby vehicles.
6. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try
to plan your calls before you begin your trip or attempt to
coincide your calls with times you may be stopped at a
stop sign, red light or otherwise stationary. But if you need
to dial while driving, follow this simple tip-dial only a few
numbers, check the road and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that
may be distracting. Stressful or emotional conversations
and driving do not mix-they are distracting and even
dangerous when you are behind the wheel of a car. Make
people you are talking with aware you are driving and if
necessary, suspend conversations which have the
potential to divert your attention from the road.
8. Use your wireless phone to call for help. Your wireless
phone is one of the greatest tools you can own to protect
yourself and your family in dangerous situations-with your
phone at your side, help is only three numbers away. Dial
9-1-1 or other local emergency number in the case of fire,
traffic accident, road hazard or medical emergency.
Remember, it is a free call on your wireless phone!
Health and Safety Information
181
9. Use your wireless phone to help others in emergencies.
Your wireless phone provides you a perfect opportunity to
be a “Good Samaritan” in your community. If you see an
auto accident, crime in progress or other serious
emergency where lives are in danger, call 9-1-1 or other
local emergency number, as you would want others to do
for you.
10.Call roadside assistance or a special wireless non
emergency assistance number when necessary. Certain
situations you encounter while driving may require
attention, but are not urgent enough to merit a call for
emergency services. But you still can use your wireless
phone to lend a hand. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured or a vehicle
you know to be stolen, call roadside assistance or other
special non-emergency wireless number.
Careless, distracted individuals and people driving
irresponsibly represent a hazard to everyone on the road.
Since 1984, the Cellular Telecommunications Industry
Association and the wireless industry have conducted
educational outreach to inform wireless phone users of their
responsibilities as safe drivers and good citizens. As we
approach a new century, more and more of us will take
advantage of the benefits of wireless telephones. And, as we
take to the roads, we all have a responsibility to drive safely.
“The wireless industry reminds you to use your phone safely
when driving.”
Cellular Telecommunications & Internet Association For more
information, please call 1-888-901-SAFE.
For updates: http://www.wow-com.com/consumer/issues/
driving/articles.cfm?ID =85
Health and Safety Information
182
Appendix C: Consumer Update on Wireless
Phones
U.S. Food and Drug Administration
1. What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called cell, mobile, or
PCS phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of
the short distance between the phone and the user s head.
These RF exposures are limited by Federal Communications
Commission safety guidelines that were developed with the
advice of FDA and other federal health and safety agencies.
When the phone is located at greater distances from the user,
the exposure to RF is drastically lower because a person’s RF
exposure decreases rapidly with increasing distance from the
source. The so-called “cordless phones,” which have a base
unit connected to the telephone wiring in a house, typically
operate at far lower power levels, and thus produce RF
exposures well within the FCC’s compliance limits.
2. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any
health problems are associated with using wireless phones.
There is no proof, however, that wireless phones are
absolutely safe. Wireless phones emit low levels of radio
frequency energy (RF) in the microwave range while being
used. They also emit very low levels of RF when in the stand-
by mode. Whereas high levels of RF can produce health
effects (by heating tissue), exposure to low level RF that does
not produce heating effects causes no known adverse health
effects. Many studies of low level RF exposures have not
found any biological effects. Some studies have suggested
that some biological effects may occur, but such findings have
not been confirmed by additional research. In some cases,
Health and Safety Information
183
other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
3. What is FDA’s role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiation
emitting consumer products such as wireless phones before
they can be sold, as it does with new drugs or medical
devices. However, the agency has authority to take action if
wireless phones are shown to emit radio frequency energy
(RF) at a level that is hazardous to the user. In such a case,
FDA could require the manufacturers of wireless phones to
notify users of the health hazard and to repair, replace or
recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone industry
to take a number of steps, including the following:
●
Support needed research into possible biological effects of
RF of the type emitted by wireless phones;
●
Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device
function; and
●
Cooperate in providing users of wireless phones with the
best possible information on possible effects of wireless
phone use on human health
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
●
National Institute for Occupational Safety and Health
●
Environmental Protection Agency Federal Communications
Commission
Health and Safety Information
184
●
Occupational Safety and Health Administration
●
National Telecommunications and Information
Administration
●
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless phones
with the Federal Communications Commission (FCC). All
phones that are sold in the United States must comply with
FCC safety guidelines that limit RF exposure. FCC relies on
FDA and other health agencies for safety questions about
wireless phones.
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at
higher power than do the wireless phones themselves, the RF
exposures that people get from these base stations are
typically thousands of times lower than those they can get
from wireless phones. Base stations are thus not the primary
subject of the safety questions discussed in this document.
4. What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that
high priority animal studies are conducted to address
important questions about the effects of exposure to radio
frequency energy (RF).
FDA has been a leading participant in the World Health
Organization International Electromagnetic Fields (EMF)
Project since its inception in 1996. An influential result of this
work has been the development of a detailed agenda of
research needs that has driven the establishment of new
research programs around the world. The Project has also
Health and Safety Information
185
helped develop a series of public information documents on
EMF issues.
FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research and
Development Agreement (CRADA) to do research on wireless
phone safety. FDA provides the scientific oversight, obtaining
input from experts in government, industry, and academic
organizations. CTIA-funded research is conducted through
contracts to independent investigators. The initial research
will include both laboratory studies and studies of wireless
phone users. The CRADA will also include a broad assessment
of additional research needs in the context of the latest
research developments around the world.
5. What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products—and at this point we do
not know that there is—it is probably very small. But if you
are concerned about avoiding even potential risks, you can
take a few simple steps to minimize your exposure to radio
frequency energy (RF). Since time is a key factor in how much
exposure a person receives, reducing the amount of time
spent using a wireless phone will reduce RF exposure.
If you must conduct extended conversations by wireless
phone every day, you could place more distance between your
body and the source of the RF, since the exposure level drops
off dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or
use a wireless phone connected to a remote antenna
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like
those described above to reduce your RF exposure from
wireless phone use.
Health and Safety Information
186
6. What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you
want to take steps to lower exposure to radio frequency
energy (RF), the measures described above would apply to
children and teenagers using wireless phones. Reducing the
time of wireless phone use and increasing the distance
between the user and the RF source will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless
phones at all. For example, the government in the United
Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly precautionary; it
was not based on scientific evidence that any health hazard
exists.
7. Do hands-free kits for wireless phones reduce risks from
exposure to RF emissions?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
hands-free kits reduce risks. Hands-free kits can be used with
wireless phones for convenience and comfort. These systems
reduce the absorption of RF energy in the head because the
phone, which is the source of the RF emissions, will not be
placed against the head. On the other hand, if the phone is
mounted against the waist or other part of the body during
use, then that part of the body will absorb more RF energy.
Wireless phones marketed in the U.S. are required to meet
safety requirements regardless of whether they are used
against the head or against the body. Either configuration
should result in compliance with the safety limit.
Health and Safety Information
187
8. Do wireless phone accessories that claim to shield the
head from RF radiation work?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those
emissions reduce risks. Some products that claim to shield
the user from RF absorption use special phone cases, while
others involve nothing more than a metallic accessory
attached to the phone. Studies have shown that these
products generally do not work as advertised. Unlike “hand-
free” kits, these so-called “shields” may interfere with proper
operation of the phone. The phone may be forced to boost its
power to compensate, leading to an increase in RF
absorption. In February 2002, the Federal trade Commission
(FTC) charged two companies that sold devices that claimed
to protect wireless phone users from radiation with making
false and unsubstantiated claims. According to FTC, these
defendants lacked a reasonable basis to substantiate their
claim.
9. What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason, FDA
helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones. This
test method is now part of a standard sponsored by the
Association for the Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by FDA, medical device
manufacturers, and many other groups, was completed in
late 2000. This standard will allow manufacturers to ensure
that cardiac pacemakers and defibrillators are safe from
wireless phone EMI.
Health and Safety Information
188
FDA has tested hearing aids for interference from handheld
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic
Engineers (IEEE). This standard specifies test methods and
performance requirements for hearing aids and wireless
phones so that no interference occurs when a person uses a
compatible phone and a compatible hearing aid at the same
time. This standard was approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmful interference be found to occur, FDA will conduct
testing to assess the interference and work to resolve the
problem.
10.What are the results of the research done already?
The research done thus far has produced conflicting results,
and many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of
radio frequency energy (RF) exposures characteristic of
wireless phones have yielded conflicting results that often
cannot be repeated in other laboratories. A few animal
studies, however, have suggested that low levels of RF could
accelerate the development of cancer in laboratory animals.
However, many of the studies that showed increased tumor
development used animals that had been genetically
engineered or treated with cancer causing chemicals so as to
be pre-disposed to develop cancer in the absence of RF
exposure. Other studies exposed the animals to RF for up to
22 hours per day. These conditions are not similar to the
conditions under which people use wireless phones, so we don
t know with certainty what the results of such studies mean
for human health.
Health and Safety Information
189
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, gioma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland, leukemia, or
other cancers. None of the studies demonstrated the
existence of any harmful health effects from wireless phone
RF exposures. However, none of the studies can answer
questions about long-term exposures, since the average
period of phone use in these studies was around three years.
11.What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological
studies of people actually using wireless phones would
provide some of the data that are needed. Lifetime animal
exposure studies could be completed in a few years. However,
very large numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one exists.
Epidemiological studies can provide data that is directly
applicable to human populations, but 10 or more years follow-
up may be needed to provide answers about some health
effects, such as cancer. This is because the interval between
the time of exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many years. The
interpretation of epidemiological studies is hampered by
difficulties in measuring actual RF exposure during day-to-day
use of wireless phones. Many factors affect this
measurement, such as the angle at which the phone is held,
or which model of phone is used.
Health and Safety Information
190
12.Which other federal agencies have responsibilities related
to potential RF health effects?
Additional information on the safety of RF exposures from
various sources can be obtained from the following
organizations.
FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
Occupational Safety and Health Administration’s (OSHA):
http://www.osha-slc.gov/SLTC/radiofrequencyradiation/
index.html
National Institute for Occupational Safety and Health
(NIOSH):
http://www.cdc.gov/niosh/emfpg.html
World health Organization (WHO):
http://www.who.int/peh-emf/
International Commission on Non-Ionizing Radiation
Protection:
http://www.icnirp.de
National Radiation Protection Board (UK):
http://www.nrpb.org.uk
Updated 4/3/2002: US Food and Drug Administration http://
www.fda.gov/cellphones
STANDARD LIMITED WARRANTY
191
STANDARD LIMITED
WARRANTY
What is Covered and For How Long?
SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P. (SAMSUNG) warrants
to the original purchaser ("Purchaser") that SAMSUNG’s
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for
the period commencing upon the date of purchase and
continuing for the following specified period of time after that
date:
Phone 1 Year
Batteries 1 Year
Leather Case/Pouch 90 Days
Holster 90 Days
Other Phone Accessories 1 Year
What is Not Covered?
This Limited Warranty is conditioned
upon proper use of Product by Purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting
from accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification of any
part of Product, including antenna, or cosmetic damage; (b)
equipment that has the serial number removed or made
illegible; (c) any plastic surfaces or other externally exposed
parts that are scratched or damaged due to normal use; (d)
malfunctions resulting from the use of Product in conjunction
with accessories, products, or ancillary/peripheral equipment
not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside
the United States or Canada.
STANDARD LIMITED WARRANTY
192
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and
this Limited Warranty does not cover any battery if (i) the
battery has been charged by a battery charger not specified
or approved by SAMSUNG for charging the battery, (ii) any of
the seals on the battery are broken or show evidence of
tampering, or (iii) the battery has been used in equipment
other than the SAMSUNG phone for which it is specified.
What are SAMSUNG’s Obligations?
During the applicable
warranty period, SAMSUNG will repair or replace, at
SAMSUNG’s sole option, without charge to Purchaser, any
defective component part of Product. To obtain service under
this Limited Warranty, Purchaser must return Product to an
authorized phone service facility in an adequate container for
shipping, accompanied by Purchaser’s sales receipt or
comparable substitute proof of sale showing the date of
purchase, the serial number of Product and the sellers’ name
and address. To obtain assistance on where to deliver the
Product, call Samsung Customer Care at 1-888-987-4357.
Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG’s sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather
cases, pouches and holsters will be warranted for a period of
ninety (90) days. All other repaired/replaced Product will be
warranted for a period equal to the remainder of the original
Limited Warranty on the original Product or for 90 days,
whichever is longer. All replaced parts, components, boards
and equipment shall become the property of SAMSUNG. If
SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
STANDARD LIMITED WARRANTY
193
What Are the Limits On SAMSUNG’s Liability?
EXCEPT AS
SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT “AS IS,” AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO:
●
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS
FOR ANY PARTICULAR PURPOSE OR USE;
●
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
●
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF
THE PRODUCT;
●
THE WORKMANSHIP OF THE PRODUCT OR THE
COMPONENTS CONTAINED THEREIN; OR
●
COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL
BE CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY
KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL
IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE
BY OPERATION OF LAW, INCLUDING IF APPLICABLE THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE
SAME DURATION OF TIME AS THE EXPRESS WRITTEN
WARRANTY STATED HEREIN. SOME STATES/PROVINCES DO
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM
THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM
THE USE OR LOSS OF USE OF THE PRODUCT OR FROM THE
STANDARD LIMITED WARRANTY
194
BREACH OF THE EXPRESS WARRANTY, INCLUDING
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS,
OR FOR DAMAGES ARISING FROM ANY TORT (INCLUDING
NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT
COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR
FOR ANY BREACH OF CONTRACT OR FOR ANY CLAIM
BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY.
SOME STATES/PROVINCES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY
NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM
STATE TO STATE/PROVINCE TO PROVINCE.
THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN
THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER’S EXCLUSIVE REMEDY. IF ANY PORTION OF
THIS LIMITED WARRANTY IS HELD ILLEGAL OR
UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL
ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED
WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND
WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS
OR AS LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION
WITH THE PRODUCT. SAMSUNG MAKES NO WARRANTIES OR
REPRESENTATIONS AND THERE ARE NO CONDITIONS,
EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO
THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE
OR SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR
EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED
BY SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
STANDARD LIMITED WARRANTY
195
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-
PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE
PURCHASER AND THE DIRECT VENDOR, OWNER OR
SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG’s Product
pricing reflects this allocation of risk and the limitations of
liability contained in this Limited Warranty. The agents,
employees, distributors, and dealers of SAMSUNG are not
authorized to make modifications to this Limited Warranty, or
make additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer advertising
or presentation, whether oral or written, do not constitute
warranties by SAMSUNG and should not be relied upon.
Samsung Telecommunications America, L.P.
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2004 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior
written approval.
Specifications and availability subject to change without
notice. [080802]
Glossary
196
Glossary
To help you understand the main technical terms and
abbreviations used in this booklet and take full advantage of
the features of your mobile phone, here are a few definitions:
Active Folder
Ability to answer a call simply by opening the phone.
Call Forwarding
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or making
another call; you can then switch between the two calls, as
required.
Call Waiting
Informs you that you have an incoming call when you are
engaged on another call.
Caller Line Identification Services (Caller ID)
Services allowing subscribers to view or block the telephone
numbers of callers.
Dual Band
Ability to operate with both DCS (1800 Mhz) and GSM (900
Mhz) networks. The phone automatically uses the network
with the strongest signal and even switches networks during a
call within the same operator’s network.
Glossary
197
EMS (Enhanced Message Service)
An adaptation of the Short Message Service (SMS) that allows
you to send and receive ring tones and service provider’s
logo, as well as combinations of simple media to and from
EMS-compliant handsets. Because EMS is based on SMS, it
can use SMS centers the same way that SMS does. EMS
works on all Global System for Mobile communications (GSM)
networks. EMS senders can use text, melodies, pictures,
sounds, and animations to enhance the expressive power of
messages that are limited by the display constraints of mobile
devices.
GPRS (General Packet Radio Service)
New non-voice value-added service that allows information to
be sent and received across a mobile telephone network.
GPRS provides continuous connection to the Internet for
mobile phone and computer users. It is based on the Global
System for Mobile Communication (GSM) circuit-switched
cellular phone connections and the Short Message Service
(SMS).
GSM (Global System for Mobile Communication)
International standard for cellular communication,
guaranteeing compatibility between the various network
operators. GSM covers most European countries and many
other parts of the world.
Java
Programming language generating applications that can run
on all hardware platforms, whether small, medium or large,
without modification. It has been promoted for and geared
heavily to the Web, both for public Web sites and Intranets.
When a Java program runs from a Web page, it is called a
Java applet. When it is run on a mobile phone or pager, it is
called a MIDlet.
Glossary
198
MMS (Multimedia Message Service)
A message service for the mobile environment, standardized
by the WAP Forum and the 3rd Generation Partnership
Program (3GPP). For phone users, MMS is similar to Short
Message Service (SMS)-it provides automatic, immediate
delivery of user-created content from phone to phone. The
message addressing used is primarily phone numbers, thus
the traffic goes from phone to phone. MMS also provides
support for e-mail addressing, so that messages can be sent
by e-mail. In addition to the text content of SMS, MMS
messages can contain still images, voice or audio clips, and
also video clips and presentation information.
Multi-party Calling
Ability to establish a conference call involving up to five
additional parties.
Phone Password
Security code used to unlock the phone when you have
selected the option to lock it automatically each time it
switches on.
PIN (Personal Identification Number)
Security code that protects the phone against unauthorized
use. The PIN is supplied by the service provider with the SIM
card. It may be a four to eight-digit number and can be
changed, as required.
Glossary
199
Proxy Server
A proxy server resides between a Web client, such as a web
browser, and a real Web server and acts as an intermediary
between them. When some people browse a web site, their
browser is not actually connecting to the web server. The
request from their browser goes to a proxy server, and the
proxy server makes the request to the web server. A proxy
server can improve performance for groups of users because
it cache the results of all requests for a certain amount of
time. If a user requests a web page that it already loaded for
another user, it reloads the page instead of forwarding the
request to the Web server, which can be a time-consuming
operation.
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an incorrect PIN
has been entered three times in succession. The eight-digit
number is supplied by the service provider with the SIM card.
Roaming
Use of your phone when you are outside your home area
(when traveling for example).
SIM (Subscriber Identification Module)
Card containing a chip with all the information required to
operate the phone (network and memory information, as well
as the subscriber’s personal data). The SIM card fits into a
small slot on the back of the phone and is protected by the
battery.
Glossary
200
SMS (Short Message Service)
Network service sending and receiving messages to and from
another subscriber without having to speak to the
correspondent. The message created or received can be
displayed, received, edited or sent.
Soft Keys
Two keys marke
d
and on the phone, the purpose of
which:
●
varies according to the function that you are currently
using.
●
is indicated on the bottom line of the display just above the
corresponding key.
Voice Mail
Computerized answering service that automatically answers
your calls when you are not available, plays a greeting
(optionally in your own voice) and records a message.
201
Index
A
Access codes •
159
Alarm •
125
Alert type •
110
Alphabet mode, text input •
49
Answering
call •
26
second call •
54
Anykey answer •
121
Auto redial •
121
B
Background image •
115
Backlight
description •
15
time, set •
116
Barring, calls •
138
Battery
charging •
19
installing •
18
low indicator •
20
removing •
18
Broadcast messages •
74
Browser, WAP •
154
C
Calculator •
136
Calendar memos
copying •
129
erasing •
129
viewing •
127
writing •
127
Call back, message •
66
Call costs •
99
,
109
Call records
incoming •
97
missed •
27
,
97
outgoing •
98
Call time •
99
Caller groups
editing •
39
searching •
38
Caller ID •
142
Callsanswering •
26
,
54
barring •
138
ending •
24
forwarding •
137
holding •
51
making •
23
redialing •
24
rejecting •
26
waiting •
54
,
140
Camera
playing video •
107
taking photo •
101
viewing photo •
105
CB (Cell Broadcast) messages •
74
Characters, enter •
45
Charging battery •
19
Closed User Group (CUG) •
142
Conference call •
55
Connect tone •
113
Cost, calls •
99
Currency exchange •
136
D
Date, set •
129
Deleting
calendar memo •
129
call record •
97
e-mail message •
88
,
89
multimedia message •
77
,
78
phonebook •
37
photo •
105
task •
133
text message •
66
,
67
video •
107
voice memo •
135
202
Delivery reports, message •
72
Dialed calls •
98
Display
backlight •
15
icons •
14
layout •
13
settings •
115
Downloading
games •
151
images •
116
sounds •
110
E
Earpiece volume •
25
E-mail messages
creating/sending •
90
deleting •
88
,
89
reading •
87
,
89
setting •
94
E-mail profile •
95
EMS (Enhanced Message Service) •
65
Error tone •
112
External display •
116
F
FDN (Fixed Dial Number) mode •
120
Folder tone •
112
Forwarding
calls •
137
e-mail message •
88
multimedia message •
77
Front LCD •
15
,
116
Funbox •
145
G
Games
downloading •
151
playing •
152
Graphic logo •
117
Greeting message •
123
H
Health and safety •
162
Holding, call •
51
I
Icons, description •
14
Images
downloading •
117
viewing •
154
Inbox, messages
e-mail •
87
multimedia •
75
text •
65
International calls •
23
Internet •
154
J
Java service •
151
K
Key volume •
25
Keypad tones
selecting •
110
sending •
53
Keysdescription •
11
location •
10
shortcut •
122
L
Language, select •
118
Last number, redial •
24
Locking
phone •
119
Low battery indicator •
20
203
M
Memory status
camera •
108
downloaded items •
155
e-mail messages •
94
multimedia messages •
84
phonebook •
43
text messages •
73
voice memos
135
Menu style •
116
Menus
accessing •
57
list •
58
Message tone •
111
Messages
cell broadcast •
74
e-mail •
87
greeting •
123
multimedia •
75
,
154
reading •
65
setting •
71
text •
65
voice •
73
web •
151
MIDlets, launch •
152
Minute minder •
113
Missed calls •
27
,
97
MMS (Multimedia Message Service)
•
75
Morning call •
125
Multimedia messages
creating/sending •
80
deleting •
77
,
78
editing •
78
reading •
75
,
78
setting •
81
Multi-party calls •
55
Muting
all sounds •
29
key tones •
53
microphone •
52
N
Names
entering •
45
searching/dialing •
37
Network selection •
141
Network services •
125
,
137
Numbers, phone
searching/dialing •
37
storing •
33
O
On/off switch, phone •
21
Organizer •
125
Outbox, messages
e-mail •
89
multimedia •
78
text •
67
Own number •
117
P
Password
call barring •
140
phone •
119
,
159
Phone
display •
13
icons •
14
keys •
11
layout •
10
locking •
119
password •
159
resetting •
123
switching on/off •
21
unpacking •
9
Phonebook
copying •
37
editing •
36
erasing •
37
options •
36
searching/dialing •
37
speed-dialing •
40
storing •
33
204
Photo
deleting •
105
taking •
101
viewing •
105
Pictures, downloaded •
154
PIN changing •
119
description •
160
PIN2changing •
120
description •
161
Power on/off tone •
112
Problems, solving •
156
PUK •
160
PUK2 •
161
R
Received calls •
97
Received messages
e-mail •
87
multimedia •
75
text •
65
Recording
voice memos •
134
Redialing
automatically •
121
manually •
24
Resetting phone •
123
Ring tone •
109
Ring type •
110
Ring volume •
109
,
116
,
154
Roaming •
141
S
Safety
information •
162
precautions •
7
Scheduler •
127
SDN (Service Dialling Numbers) •
43
Searching, phonebook •
37
Security, calls •
118
Sent messages
e-mail •
89
multimedia •
78
text •
67
Service light •
16
,
116
Shortcut, menu •
122
SIM card
installing •
17
SIM Lock •
120
SMS (Short Message Service)
Inbox •
65
Outbox •
67
Soft keys •
31
Sound settings •
109
Sounds
downloading •
110
playing •
154
Speed-dialing •
40
Switching on/off
microphone •
52
phone •
21
Symbol mode, text input •
50
T
T9 mode, text input •
47
Tasks, to do list
creating •
131
editing •
132
Templates, message
e-mail •
92
multimedia •
83
text •
70
Text input mode •
46
Text message
creating/sending •
68
deleting •
66
,
67
reading •
65
,
67
setting •
71
Text, enter •
45
Time format •
130
Time, set •
129
To do list •
131
205
Toneconnect •
113
error •
112
folder •
112
keypad •
110
message •
111
minute minder •
113
power on/off •
112
ring •
109
Travel adapter •
19
TTY setting •
122
U
User group •
142
V
Vibration •
29
,
110
Video
deleting •
107
playing •
107
Voice mail •
73
Voice memo
deleting •
135
playing •
135
recording •
134
Voicemail server •
73
Volume, adjust
keypad tone •
25
ring •
109
Volume,adjusting
earpiece •
25
W
Waiting call •
54
,
140
Wallpaper •
115
WAP browser
accessing •
154
cache, clear •
150
favorites •
148
setting •
149
World time •
129
Writing messages
e-mail•
90
multimedia •
80
text •
68
206
207
Access the
Menu
Functions
➀
Press the
Menu
soft key.
➁
Scroll using the Up and
Down keys through the
list of the menus until you
reach the menu you want.
➂
Press the
Select
soft key.
➃
Scroll using the Up and
Down keys through the
list of the options until the
one you want is selected.
➄
Press the
Select
soft key.
•Each of the two soft keys ( and )
perform the function indicated by the
text above it, on the bottom line of the
display.
Switch On/Off Press and hold the
key.
Make a Call
➀
Enter the number.
➁
Press the
key.
End a Call Briefly press the key.
View Missed
Calls
Immediately
After Missing
Them
➀
Open the phone and
press the
View
soft
key.
➁
Scroll using the Up and
Down keys through the
missed calls.
➂
To return the call, press
the
key.
Answer a Call Open the phone
or
Press the
key.
Adjust the
Volume Press the or key on
the left side of the phone.
Dual Band SGH-X427MGPRS Telephone
Quick Reference Card
208
Choose the
Alert Type
➀
Select the
Alert Type
menu (
Menu 6.4
).
➁
Select an option:
• Light Only
• Melody
• Vibration
• Vibra+Melody
➂
Press the
Select
soft key.
Store
Numbers in
Phone Book
➀
Enter the number and
press the
Save
soft key.
➁
Select an icon.
➂
Press the
Select
soft key.
➃
Select a memory.
➄
Press the
Select
soft key.
➅
Enter the name.
➆
Press the
OK
soft key.
➇
If necessary, change the
location number.
➈
Press the
OK
soft key.
➉
Press the key to
return to Idle mode.
Search for a
Number in
Phone Book
➀
Press the
Name
soft key.
➁
Select the
Search
option.
➂
Enter the first few letters
of the name.
➃
To scroll through the
names, press the Up or
Down key.
➄
Press the
View
soft key.
➅
To scroll through the
numbers, press the Up or
Down key.
➆
Press the
key to dial.
Take a
Photo
➀
Press and hold the
key
or the Camera key on the
right side of the phone.
➁
Press the Camera key or
the left soft key.
➂
Press the
Save
soft key.
➃
Enter a name for the
photo.
➄
Press the
OK
soft key.