Samsung Electronics Co SGHE500 Single-Band PCS GSM/ EDGE Phone with Bluetooth User Manual
Samsung Electronics Co Ltd Single-Band PCS GSM/ EDGE Phone with Bluetooth Users Manual
Users Manual
* Depending on the software installed or your service provider or country,
some of the descriptions in this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear
different from the illustrations in this guide.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-xxxxxA
English (EU). 05/2006. Rev. 1.0
Draft
2006. 05. 22
(Version: E500XAFD4)
SGH-E500
User’s Guide
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Drive safely at all times
Do not use a hand-held phone while driving. Park the
vehicle first.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them in
an aircraft is both illegal and dangerous.
Switch off the phone near all medical equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
1
Important safety precautions
Be aware of special regulations
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Emergency call
Key in the emergency number for your present
location, then press .
Keep your phone away from small children
Keep the phone and all its parts, including accessories,
out of the reach of small children.
Accessories and batteries
Use only Samsung-approved batteries and
accessories, such as headsets and PC data cables. Use
of any unauthorised accessories could damage you or
your phone and may be dangerous.
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see "Health and
safety information" on page 107.
• The phone could explode if the battery is replaced
with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
At very high volumes, prolonged listening to a
headset can damage your hearing.
2
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful attention
to the subsequent information regarding safety or
phone features.
Indicates that you can get more information on
the referenced page.
→
Indicates that you need to press the Navigation
keys to scroll to the specified option and then
select it.
[
]
Indicates a key on the phone. For example,
[].
<
>
Indicates a soft key, whose function is displayed
on the phone screen. For example, <
Menu
>
• Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
Special
features of your phone
•Music player
Play music files using your phone
as a music player.
• Voice recognition
Just say a command to dial a
phone number or access features.
• Get personal with photo caller
ID
See who’s calling you when their
very own photo displays.
3
Special features of your phone
•Bluetooth
Transfer media files and personal
data and connect to other devices
using free, wireless Bluetooth
technology.
• Name card
Create name cards with your
number and profile. Whenever
introducing yourself to others, use
this convenient electronic name
card.
•Java
Enjoy Java
™
-based embedded
games and download new games.
• Digital data printing
Print images, messages, and other
personal data directly from your
phone.
•Women’s life
Use multiple features designed for
women in our modern world.
• Offline mode
Switch your phone to offline to use its
non-wireless functions in an airplane.
• Multimedia Message Service (MMS)
Send and receive MMS messages with a
combination of text, images, video, and audio.
•E-mail
Send and receive e-mails with images, video, and
audio attachments.
4
Contents
Unpack 6
Make sure you have each item
Your phone 6
Keys, features, and locations
Get started 7
First steps to operating your phone
Install and charge the phone ..................................... 7
Power on or off........................................................ 8
Keys and display ..................................................... 9
Access menu functions ............................................ 11
Customise your phone............................................. 12
Make/Answer calls .................................................. 15
Step outside the phone 16
Begin with your camera, the music player, the web browser,
and other special features
Use the camera ...................................................... 16
Play music ............................................................. 17
Browse the web...................................................... 18
Use Phonebook ...................................................... 18
Send messages ...................................................... 19
View messages....................................................... 21
Use Bluetooth ........................................................ 22
Use voice recognition .............................................. 23
Enter text 25
ABC, T9, Number, and Symbol modes
Call functions 27
Advanced calling features
Menu functions 32
All menu options listed
Solve problems 105
Help and personal needs
Health and safety information 107
Index 115
5
1 Call log
p.32
1 Recent contacts
2 Missed calls
3 Dialled calls
4 Received calls
5 Delete all
6 Call time
7 Call costs
*
p.32
p.33
p.33
p.33
p.33
p.33
p.34
2 Phonebook
p.34
1 Contact list
2 FDN contacts
3 Create contact
4 Group
5 Speed dial
6 My namecard
7 Own number
8 Management
9 Service number
*
p.34
p.35
p.36
p.37
p.37
p.38
p.38
p.38
p.39
3 Applications
p.39
1 Music Player
2 Voice recorder
3 Image editor
4 Beauty tools
5 Women’s life
6 Bluetooth
7 Java world
8 Voice commands
9 SIM-AT
*
p.39
p.42
p.43
p.44
p.45
p.49
p.51
p.53
p.55
4 Browser
p.55
1 Home
2 Bookmarks
3 Enter URL
4 Clear cache
5 Profile settings
6 Current profile
p.55
p.56
p.57
p.57
p.57
p.58
5 Messages
p.59
1 Create new message
2 My messages
3 Templates
p.59
p.63
p.68
5 Messages
(continued)
4 Delete all
5 Settings
6 Broadcast messages
7 Memory status
p.69
p.69
p.76
p.76
6 My files
p.76
1 Images
2 Videos
3 Music
4 Sounds
5 Other files
6 Memory status
p.77
p.78
p.79
p.79
p.79
p.80
7 Planner
p.80
1 Alarm
2 Calendar
3 Memo
4 World time
5 Calculator
6 Converter
7 Timer
8 Stopwatch
p.80
p.81
p.85
p.85
p.86
p.86
p.87
p.87
8 Camera
p.88
1 Take photo
2 Record video
3 Go to My photos
4 Go to My video clips
p.88
p.91
p.94
p.94
9 Settings
p.95
1 Time and date
2 Phone settings
3 Display settings
4 Sound settings
5 Light settings
6 Network services
7 Security
8 Memory status
9 Reset settings
p.95
p.95
p.98
p.99
p.100
p.101
p.103
p.105
p.105
* Shows only if supported by your
SIM card.
Overview of menu functions
To access Menu mode, press <
Menu
> in Idle mode.
6
Unpack
Make sure you have each item
You can obtain various accessories
from your local Samsung dealer.
Phone Travel Adapter
Battery User’s Guide
The items supplied with your
phone and the accessories
available at your Samsung dealer
may vary, depending on your
country or service provider.
Your phone
Keys, features, and locations
Headset/Adapter jack
Left soft key
Special
function keys
Camera lens
Alphanumeric
keys
Web access/
Confirm key
Dial key
Main display
Earpiece
Volume keys
Power on/off/
Menu exit key
Right soft key
Microphone
Navigation keys
(Up/Down/
Left/Right)
Delete key
Camera key
External
display
7
Get started
First steps to operating your phone
SIM card information
When you subscribe to a cellular network, you receive
a plug-in SIM (Subscriber Identity Module) card
loaded with your subscription details, such as your
PIN, and available optional services.
Install and charge the phone
Remove the battery
cover.
If the phone is already
on, first turn it off by
pressing and holding
[].
Insert the SIM card.
Make sure that the gold-
coloured contacts on the
card are face down.
Install the battery. Reattach the cover.
Plug the travel adapter into the phone.
Plug the adapter into a standard AC wall outlet.
8
Get started
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the battery low message displays, and
• the empty battery icon blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
Power on or off
Offline mode
You can switch the phone to Offline mode, in which the
phone functions requiring network connection are
deactivated. This mode is helpful when you want to use
your phone in a place where you are not allowed to use
mobile devices, such as in an airplane and at a hospital.
To switch to Offline mode, press <
Menu
> and select
Settings
→
Phone settings
→
Offline mode
→
On
.
In Offline mode, you can use non-wireless functions,
such as games, calendar, camera, and music player.
When the phone is completely charged (the
battery icon becomes still), unplug the adapter
from the power outlet.
Remove the adapter from the phone.
Switch on
Do not turn on
the phone when
mobile phone
use is prohibited.
1. Open the phone.
2. Press and hold
[]
.
3. If necessary, enter the PIN and
press <
OK
>.
Switch off
1. Open the phone.
2. Press and hold
[]
.
9
Get started
Keys and display
Keys
Perform the function indicated on the
bottom line of the display.
In Idle mode, access your favourite
menus directly.
p. 95
In Menu mode, scroll through menu
options.
In Idle mode, launch the web browser.
In Menu mode, select the highlighted
menu option or confirm input.
Send or answer a call.
In Idle mode, retrieve numbers recently
dialled, missed, or received.
Delete characters from the display and
selected items in an application.
In Idle mode, initiate voice recognition.
Press and hold to switch the phone on or
off.
End a call.
In Menu mode, cancel input and return
the phone to Idle mode.
Enter numbers, letters, and some special
characters.
In Idle mode, press and hold
[1]
to
access your voicemail. Press and hold [
0
]
to enter an international call prefix.
Enter special characters.
In Idle mode, press and hold [
]
to
activate or deactivate Silent mode. Press
and hold [
]
to enter a pause between
numbers.
Adjust the phone volume.
In Idle mode, with the phone open, adjust
the key tone volume. With the phone
closed, press and hold to turn on the
external display.
10
Get started
Display
In Idle mode, access the
Camera
menu:
press and hold to turn on the camera.
In Camera mode, take a photo or record a
video.
Layout
Text and graphics
display messages,
instructions, and
information you enter.
Soft key function
indicators
show the current
functions assigned to
the soft keys.
Icons
display various icons.
Menu Contacts
Icons
*
Received signal strength
Call in progress
Out of your service area; you
cannot make or receive calls
Alarm set
p. 80
New text message
New voicemail
New multimedia message
New e-mail
One of the message Inboxes is
full
Call diverting feature active
p. 101
Bluetooth active
p. 49
Synchronised with a PC
GPRS network
EDGE network
11
Get started
Access menu functions
Home Zone, if registered for the
appropriate service
Office Zone, if registered for the
appropriate service
Roaming network
Ringer type
p. 99
• None: Melody
•: Vibration
• : Melody and vibration
• : Vibration then melody
• : Melody then vibration
Silent mode (Vibration)
Silent mode (Mute)
Battery power level
* Depending on your country or service provider, the
icons shown on the display may vary.
Use the soft
keys
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current role.
Press the left soft
key to select the
highlighted
option.
Press the right soft
key to return to the
previous menu
level.
Select Back
12
Get started
Customise your phone
Select an
option
1. Press a desired soft key.
2. Press the Navigation keys to
move to the next or previous
option.
3. Press <
Select
> or [ ] to
confirm the function displayed
or option highlighted.
4. To exit, choose either of the
following methods:
• Press <
Back
> to move up
one level.
• Press [ ] to return to Idle
mode.
Use shortcuts
Press the number key
corresponding to the option you
want.
1. In Idle mode, press <
Menu
>
and select
Settings
→
Phone
settings
→
Language
.
2. Select a language.
1. In Idle mode, press <
Menu
>
and select
Settings
→
Sound
settings
→
Incoming call
→
Ring tone
.
2. Select a ringtone category.
3. Select a ringtone.
4. Press <
Save
>.
Display
language
Call ringer
melody
13
Get started
You can set wallpaper for the idle
screen on each display.
For the main display:
1. In Idle mode, press <
Menu
>
and select
Settings
→
Display
settings
→
Wallpaper
→
Main
display
→
Main display
.
2. Select an image category.
3. Select an image.
4. Press <
Save
>.
For the external display:
1. In Idle mode, press <
Menu
>
and select
Settings
→
Display
settings
→
Wallpaper
→
Cover display
.
2. Select an image type.
Idle mode
wallpaper
3. For
Clock
, scroll to a clock type
and press <
Save
>.
For
Cover title
, enter a
greeting and press [ ]
.
For
Wallpaper images
, select
an image category and then an
image.
You can change the colour for the
display components, such as title
bars and highlight bars.
1. In Idle mode, press <
Menu
>
and select
Settings
→
Display
settings
→
Skin
.
2. Select a colour pattern.
Menu mode
skin colour
14
Get started
You can set [Left], [Right], and
[Down] to function as shortcuts to
access your favourite menus.
1. In Idle mode, press <
Menu
>
and select
Settings
→
Phone
settings
→
Shortcuts
.
2. Select a key.
3. Select a menu to be assigned to
the key.
Menu
shortcuts
You can set up a menu for your
own favourite menu items.
To set a My menu item:
1. In Idle mode, press <
Menu
>
and select
Settings
→
Phone
settings
→
My menu
.
2. Select an item to be changed.
3. Select the menu item you want.
To access a My menu item:
1. In Idle mode, press [Up].
2. Scroll to an item.
3. Press [ ].
You can switch the phone to Silent
mode to avoid disturbing other
people.
Press and hold
[
]
in Idle mode.
My Menu
mode
Silent mode
15
Make/Answer calls
You can protect the phone against
unauthorised use with a phone
password. The phone will require
the password on power-up.
1. In Idle mode, press <
Menu
>
and select
Settings
→
Security
→
Change
password
.
2. Enter the default password,
00000000
, and press <
OK
>.
3. Enter a new 4- to 8-digit
password and press <
OK
>.
4. Enter the new password again
and press <
OK
>.
5. Select
Phone lock
.
6. Select
Enable
.
7. Enter the password and press
<
OK
>.
Phone lock
1. Enter an area code and phone
number.
2. Press [ ].
3. To end the call, press [ ].
1. When the phone rings, press
[].
2. To end the call, press [ ].
Press [Volume].
Make a call
Answer a call
Adjust the
volume during
a call
16
Step outside the phone
Begin with your camera, the music player, the web
browser, and other special features
Use the camera
1. In Idle mode, press and hold
[Camera] to turn on the
camera.
2. Aim the lens at the subject and
make any desired adjustments.
3. Press [ ]
or [
Camera
]
to
take a photo. The photo is
saved automatically.
4. Press <
Back
> to take another
photo.
1. In Idle mode, press <
Menu
>
and select
My files
→
Images
→
My
photos
.
2. Select the photo you want.
Take a photo
View a photo
1. In Idle mode, press and hold
[Camera] to turn on the
camera.
2. Press [
1
] to switch to Record
mode.
3. Press [ ]
or
[
Camera
]
to
start recording.
4. Press [ ], < >, or
[
Camera
]
to stop recording. The
video is saved automatically.
5. Press < > to record another
video.
1. In Idle mode, press <
Menu
>
and select
My files
→
Videos
→
My video clips
.
2. Select the video clip you want.
Record a video
Play a video
17
Step outside the phone
Play music
Use these methods:
• Download from the wireless
web
p. 55
• Download from a computer
using the optional Samsung PC
Studio
Samsung PC Studio
User’s Guide
• Receive via Bluetooth
p. 51
1. In Idle mode, press <
Menu
>
and select
Applications
→
Music Player
.
2. Press <
Options
> and select
Add music
.
3. Press [ ] to select the files
you want and press <
Add
>.
Copy music
files to the
phone
Create a play
list
1. From the music player screen,
press [ ].
2. During playback, use the
following keys:
•: pauses or resumes
playback.
• Up: opens the current play
list.
• Left: returns to the previous
file. Moves backward in a
file when held down.
• Right: skips to the next file.
Skips forward in a file when
held down.
•Volume: adjusts the
volume.
3. Press [Down] to stop playback.
Play music files
18
Step outside the phone
Browse the web
Using a built-in web browser, you can easily access the
wireless web to get a variety of up-to-date services
and information and to download web content.
Use Phonebook
In Idle mode, press [ ].
• To scroll through browser items,
press [Up] or [Down].
• To select an item, press < >
or [ ].
• To return to the previous page,
press <
Back
> or [
C
].
• To return to the homepage,
press and hold [
C
].
• To access browser options,
select or press
[
]
.
• To access other phone menus,
press
[
]
.
Launch the
web browser
Navigate the
web
To the phone’s memory:
1. In Idle mode, enter a phone
number and press [ ].
2. Select
Phone
→
New
→
a
number type.
3. Specify contact information:
First name, Last name, Mobile,
Home, Office, Fax, Other, Email,
Graphic ID, Alert, Group, and
Notes.
4. Press [ ]
to save the
contact.
To t he SIM car d:
1. In Idle mode, enter a phone
number and press [ ].
2. Select
SIM
→
New
.
3. Enter a name.
4. Press [ ] to save the
contact.
Add a contact
19
Step outside the phone
Send messages
1. In Idle mode, press
<
Contacts
>.
2. Enter the first few letters of the
name you want.
3. Select a contact.
4. Scroll to a number and press
[] to dial, or
press
[] to
edit contact information.
1. In Idle mode, press <
Menu
>
and select
Phonebook
→
My
namecard
.
2. Specify your contact
information.
3. Press [ ]
to save the name
card.
4. To send the name card, press
<
Options
> and select
Send
via
→
a sending method.
Find a contact
Create and
send a name
card
1. In Idle mode, press <
Menu
>
and select
Messages
→
Create
new message
→
Text
message
.
2. Enter the message text and
press [ ].
3. Enter destination numbers.
4. Press [ ] to send the
message.
1. In Idle mode, press <
Menu
>
and select
Messages
→
Create
new message
→
Multimedia
message
.
2. Select
Subject
.
3. Enter the message subject and
press [ ].
Send a text
message (SMS)
Send a
multimedia
message
(MMS)
20
Step outside the phone
4. Select
Image or video
or
Sound
.
5. For
Image or video
, select
Add image
or
Add video
and
add an image or a video clip.
For
Sound
, select
Add sound
and add a sound clip.
6. Select
Text
.
7. Enter the message text and
press [ ].
8. Press <
Options
> and select
Send
.
9. Enter destination numbers or
e-mail addresses.
10. Press [ ] to send the
message.
1. In Idle mode, press <
Menu
>
and select
Messages
→
Create
new message
→
Email
.
2. Select
Subject
.
3. Enter the e-mail subject and
press [ ].
4. Select
Message
.
5. Enter the e-mail text and press
[].
6. Select
File attach
.
7. Add image, video, sound, music
files, or document files.
8. Press <
Options
> and select
Send
.
9. Enter e-mail addresses.
10. Press [ ]
to send the e-mail.
Send an e-mail
21
Step outside the phone
View messages
When a notification appears:
1. Press <
View
>.
2. Select the message from the
Inbox.
From the Inbox:
1. In Idle mode, press <
Menu
>
and select
Messages
→
My
messages
→
Inbox
.
2. Select an SMS message ( ).
When a notification appears:
1. Press <
View
>.
2. Select the message from the
Inbox.
View a text
message
View a
multimedia
message
From the Inbox:
1. In Idle mode, press <
Menu
>
and select
Messages
→
My
messages
→
Inbox
.
2. Select an MMS message ( ).
1. In Idle mode, press <
Menu
>
and select
Messages
→
My
messages
→
Email
inbox
.
2. Select
Check new mail
.
3. Select an e-mail or a header.
4. If you selected a header, press
<
Options
> and select
Retrieve
to view the body of
the e-mail.
View an e-mail
22
Step outside the phone
Use Bluetooth
Your phone is equipped with Bluetooth technology,
enabling you to connect the phone wirelessly to other
Bluetooth devices and exchange data with them, talk
hands-free, or control the phone remotely.
1. In Idle mode, press <
Menu
>
and select
Applications
→
Bluetooth
→
Activation
→
On
.
2. Select
My phone’s visibility
→
On
to allow other devices to
find your phone.
1. In Idle mode, press <
Menu
>
and select
Applications
→
Bluetooth
→
My devices
→
Search new device
.
2. Select a device.
Turn on
Bluetooth
Search for and
pair with a
Bluetooth
device
3. Enter a Bluetooth PIN or the
other device’s Bluetooth PIN, if
it has one, and press <
OK
>.
When the owner of the other
device enters the same code,
the pairing is complete.
1. Access an application,
Phonebook
,
My files
,
Calendar
, or
Memo
.
2. Select the item you want to
send.
3. Press <
Options
> and select
Send
via
→
Bluetooth
.
4. Select a device.
5. If necessary, enter the
Bluetooth PIN and press <
OK
>.
Send data
23
Step outside the phone
Use voice recognition
Your phone can recognise specific voice commands in
order to dial a number or search for a name stored in
Phonebook, access menus, or check your phone’s
status.
To receive data via Bluetooth, your
phone’s Bluetooth feature must be
active.
1. When a device attempts to
access your phone, press
<
Yes
> to permit connection.
2. If necessary, press <
Yes
> to
confirm that you are willing to
receive.
Receive data
1. In Idle mode, press [
C
].
2. At the voice prompt, say just
“Call,” or say “Call” and then a
person’s name or phone number.
3. If you said just “Call,” say a
name or phone number.
4. If the name or phone number
you hear is not what you want,
say “No.”
5. Say “Yes” when you hear what
you want.
6. Say the number type you want if
the name has more than one
number type
Dial a name
24
Step outside the phone
1. In Idle mode, press [
C
].
2. At the voice prompt, say one of
the following commands.
•
Call
<person’s name/phone
number>: dial a number by
saying a name or phone
number in Phonebook.
•
Send SMS
<person’s name
or phone number>: send an
SMS message.
•
Lookup
<person’s name>:
access contact details.
•
Go To
<menu>: access a
menu.
•
Check
<status>: check the
signal status, remaining
battery power, or your
phone number.
3. Follow the corresponding menu
procedure.
Access
features
25
Enter text
ABC, T9, Number, and Symbol modes
You can enter text in some features such as Messages,
Phonebook, or Calendar, using ABC mode, T9 mode,
Number mode, and Symbol mode.
Changing the text input mode
The text input mode indicator displays when the
cursor is in a text field.
•Press and hold
[
]
to switch between T9 ( )
and ABC ( ) modes.
•Press
[
]
to change case or to switch to Number
mode ( ).
•Press and hold
[
]
to switch to Symbol mode
().
Using ABC mode
Press the appropriate key until the character you want
appears on the screen.
(creating an SMS message with GSM-alphabet encoding)
Characters in order displayed
Key Upper case Lower case
26
Enter text
Other ABC mode operations
• To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
•Press
[
]
to insert a space.
• Press the Navigation keys to move the cursor.
•Press [
C
] to delete characters one by one. Press
and hold [
C
] to clear the display.
Using T9 mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
Entering a word in T9 mode
1. Press [
2
] to [
9
]
to start entering a word. Press
each key once for each letter.
For example, press [
4
], [
3
], [
5
], [
5
], and [
6
] to
enter Hello in T9 mode.
T9 predicts the word that you are typing, and it
may change with each key that you press.
2. Enter the whole word before editing or deleting
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [
0
] to display alternative word
choices for the keys that you have pressed.
For example, Of and Me use [
6
] and [
3
].
4. Press
[
]
to insert a space and enter the next
word.
Other T9 mode operations
• Press [
1
] to enter periods or apostrophes
automatically.
• Press the Navigation keys to move the cursor.
• Press [
C
] to delete characters one by one. Press
and hold [
C
] to clear the display.
Adding a new word to the T9 dictionary
This feature may not be available for some languages.
1. Enter the word that you want to add.
2. Press [
0
] to display alternative words for your key
presses. When there are no more alternative
words,
Spell
displays on the bottom line.
27
3. Press <
Spell
>.
4. Enter the word you want using ABC mode and
press <
Add
>.
Using Number mode
Number mode enables you to enter numbers.
Press the keys corresponding to the digits you want.
Using Symbol mode
Symbol mode enables you to insert symbols.
Call functions
Advanced calling features
Making a call
1. In Idle mode, enter the area code and phone
number.
2. Press [ ].
3. When you want to end the call, press [ ].
Making an international call
1. In Idle mode, press and hold [
0
]. The
+
character
appears.
2. Enter the country code, area code, and phone
number, then press [ ].
To Press
display more symbols [Up] or [Down].
select a symbol the corresponding
number key.
clear the symbols [
C
].
insert the symbols <
OK
>.
• Press [
C
] to clear the last digit or press and
hold [
C
] to clear the whole display.
• Press and hold
[
]
to enter a pause between
numbers.
28
Call functions
Redialling recent numbers
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press [ ].
Making a call from Phonebook
Once you have stored a number in Phonebook, you
can dial the number by selecting it from
Phonebook.
p. 34
You can also use the speed dial feature to assign your
most frequently dialled numbers to specific number
keys.
p. 37
You can quickly dial a number from the SIM card using
the location number assigned when stored.
1. In Idle mode, enter the location number for the
phone number you want and press
[
]
.
2. Scroll through other numbers, if necessary.
3. Press <
Dial
> or [ ] to dial the number you want.
Voice dialling
You can dial a number stored in Phonebook by saying
the associated name or number into the
microphone.
p. 53
Answering a call
When you receive a call, the phone rings and displays
the incoming call image.
Press <
Accept
> or [ ] to answer the call.
Tips for answering a call
• When
Anykey
answer
is active, you can press
any key to answer a call, except for <
Reject
> and
[].
p. 97
• When
Active flip
is active, you can simply open
the phone.
p. 97
• Press <
Reject
> or [ ] to reject a call.
• Press and hold [Volume] to reject a call or mute
the ringer, depending on the
Volume key
setting.
p. 96
29
Call functions
Viewing missed calls
If you have missed calls, the screen displays how
many calls you have missed.
1. Press <
View
>.
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
Using the headset
Use the headset to make or answer calls without
holding the phone.
Connect the headset to the jack on the bottom of the
phone. The button on the headset works as follows:
Options during a call
You can access a number of functions during a call.
Adjusting the volume during a call
Use [Volume] to adjust the earpiece volume during a
call.
Press [Volume up] to increase the volume level and
[Volume down] to decrease the volume level.
Placing a call on hold/Retrieving
Press <
Hold
> to place the call on hold, or press
<
Retrieve
> to retrieve the call.
Making a second call
You can make another call if your network supports
this function.
1. Press <
Hold
> to put the call on hold.
2. Make the second call in the normal way.
3. Press <
Swap
> to switch between the calls.
4. Press <
Options
> and select
End
held
call
to end
the call on hold.
To Press
redial the last call the button and then press
and hold it again.
answer a call or start
voice dialling
the button and hold.
end a call the button and hold.
30
Call functions
5. To end the current call, press [ ].
Answering a second call
You can answer an incoming call while already on the
phone, if your network supports this function and you
have activated the call waiting feature.
p. 102
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press <
Swap
> to switch between the calls.
Using the speakerphone feature
Use the speakerphone feature to talk and listen with
the phone a short distance away.
Press [ ] and then <
Yes
> to activate the
speakerphone feature. Press [ ] again to switch
back to the earpiece.
Using In-call options
Press <
Options
> to access the following options
during a call:
•
Voice clarity on
/
Voice clarity off
: remove
extraneous noise and increase call quality so that
the person with whom you are speaking can hear
you clearly even if you are in a noise place.
•
Mute
/
Unmute
: switch off the phone's microphone
so that the other person on the phone cannot hear
you, or switch it back on.
•
Mute keys
/
Send keys
: switch the key tones off
or on.
•
Phonebook
: access the contact list.
If you are using the speakerphone feature, you
must first deactivate it in order to use the voice
clarity feature.
To communicate with answering machines or
computerised telephone systems,
Send keys
must be selected.
31
Call functions
•
Send DTMF
: send the DTMF (Dual tone multi-
frequency) tones as a group. The DTMF tones are
the tones used in phones for tone dialling,
sounding when you press the number keys. This
option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
•
Message
: read an incoming message and send a
new message.
p. 59
•
Join
: set up a multi-party call by adding a caller
on hold to a currently active call. You can include
up to five people on a multi-party call.
•
Split
: have a private conversation with the
selected participant. The other participants can
converse with each other. After the private
conversation, select
Join
to return both private
participants to the multi-party call.
•
Transfer
: transfer the currently active call to a
caller on hold. The two callers can talk to each
other, but you are disconnected from the call.
•
Remove
: disconnect the selected participant.
•
End held call
: disconnect the call currently on
hold.
•
SIM service
: access special services, such as
news, weather forecasts, entertainment, and
location services, provided by your SIM card. This
option is available when you use a SIM card
supporting SIM AT menus.
•
Switch to headset
/
Switch to phone
: switch the
call to a Bluetooth headset or hands-free car kit or
back to the phone.
32
Menu functions
All menu options listed
Call log
(Menu 1)
Use this menu to view the calls you have dialled,
received, or missed, and the length of the calls. You
can also check the cost of your calls, if the SIM card
supports this function.
To access this menu, press <
Menu
> in Idle mode and
select
Call log
.
Recent contacts
(Menu 1.1)
This menu displays the most recent calls dialled,
received, or missed.
Accessing a call log
1. Press [Left] or [Right] to move to another call
type.
2. Press [Up] or [Down] to scroll through the call list.
3. Press [ ] to dial a number, or [ ] to view the
details of a call.
Using call log options
From the call list, press <
Options
> to access the
following options:
•
Details
: access the call details about the selected
call log.
•
Call
: make a call to the number.
•
Add to Phonebook
: save the number in
Phonebook.
•
Send message
: send an SMS or MMS message.
•
Delete
: delete the selected call log or all call logs.
•
Reject list
: specify numbers from which you do
not want to accept calls.
•
Add to reject list
: add the number to the Reject
list.
•
View contact details
: access contact
information, if the caller is saved in Phonebook.
33
Menu functions
Call log
(Menu 1)
Missed calls
(Menu 1.2)
This menu displays the most recent received calls that
you did not answer.
Dialled calls
(Menu 1.3)
This menu displays the most recent calls you have
dialled.
Received calls
(Menu 1.4)
This menu displays the most recent calls you have
received.
Delete all
(Menu 1.5)
Use this menu to delete all of the logs in each call
type.
1. Press [ ] to select the call types to be cleared.
2. Press <
Delete
>.
3. Press <
Yes
> to confirm the deletion.
Call time
(Menu 1.6)
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
•
Last
call
time
: check the length of your last call.
•
Total
sent
: check the total length of all the calls
you have dialled.
•
Total
received
: check the total length of all the
calls you have received.
•
Reset
timers
: reset the call timers. You need to
enter the phone password.
The password is preset to
00000000
. You can
change this password.
p. 104
34
Menu functions
Call costs
(Menu 1.7)
This network feature displays the cost of calls. This
menu is available only if your SIM card supports this
feature. Note that this is not intended to be used for
billing purposes.
•
Last
call
cost
: check the cost of your last call.
•
Total
cost
: check the total cost of all your calls. If
the total cost exceeds the maximum cost set in
Set
max
cost
, you must reset the counter before
you can make another call.
•
Max
cost
: check the maximum cost limit set in
Set
max
cost
.
•
Reset
counters
: reset the cost counters.
•
Set
max
cost
: set the maximum cost authorised
for your calls.
•
Price/Unit
: set the price per unit that is applied
when the cost of your calls is calculated.
Phonebook
(Menu 2)
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Phonebook.
To access this menu, press <
Menu
> in Idle mode and
select
Phonebook
.
Contact list
(Menu 2.1)
Use this menu to search for contacts in Phonebook.
Finding a contact
1. Enter the first few letters of the name that you
want to find.
2. Select the name you want from the list.
3. Scroll to a number and press [ ] to dial, or press
[ ] to edit contact information.
You can quickly access this menu by pressing
<
Contacts
> in Idle mode.
35
Menu functions
Phonebook
(Menu 2)
Using Phonebook options
While viewing contact details, press <
Options
> to
access the following options:
•
Edit
: edit contact information.
•
Send message
: send an SMS or MMS message to
the selected number, or send an MMS message or
e-mail to the selected e-mail address.
•
Copy
: copy the number to the phone’s memory, to
the SIM card, or to the FDN list.
•
Copy to phone
: copy the e-mail address to the
phone’s memory.
•
Send via
: send the contact via SMS, MMS, e-mail,
or Bluetooth.
•
Delete
: delete the selected contact.
•
Print via Bluetooth
: print the contact by
connecting the phone to a printer via Bluetooth.
Some printers may not be compatible with the
phone.
•
Mark as default number
: set the selected
number as the default for the contact.
FDN contacts
(Menu 2.2)
Use this menu to create a list of contacts to be used in
FDN (Fixed Dialling Number) mode, in which the
phone allows outgoing calls only to the specified
phone numbers, if your SIM card supports this
feature. You can activate FDN mode in the
FDN mode
menu.
p. 104
Storing a contact
1. From the FDN list, press <
Options
> and select
Add
.
2. Enter your PIN2 and press <
OK
>.
3. Enter information about the contact:
•
Name
: assign a name.
•
Phone number
: add a number.
•
Location
: assign a location number.
4. Press <
Save
> to save the contact.
Using contact options
You can access contact options by pressing
<
Options
> in the FDN list.
36
Menu functions
Create contact
(Menu 2.3)
Use this menu to add a new contact to Phonebook.
Storing a contact in the phone’s memory
1. Select
Phone
.
2. Change the settings or enter information about the
contact:
•
First name
/
Last name
: assign a name.
•
Mobile
/
Home
/
Office
/
Fax
/
Other
: add a
number in any category.
You can change the number type, or set the
number as the default for the contact by
pressing <
Options
> and selecting
Change
type
or
Mark as default number
.
•
Email
: assign an e-mail address.
•
Graphic ID
: assign a caller ID image to alert
you to a call from the person.
•
Alert
: assign a ringtone to alert you to a call
from the person.
•
Group
: assign the number to a caller group.
•
Notes
: add a memo about the person.
3. Press <
Options
> and select
Save
, or <
Save
> to
save the contact.
Storing a contact on the SIM card
1. Select
SIM
.
2. Enter a name and press [Down].
3. Enter a phone number and press [Down].
4. Change the location number, if necessary.
5. Press <
Save
> to save the contact.
You can set domain name extensions and
retrieve one by pressing <
Options
> and
selecting
Common address
.
The settings specified in
Graphic ID
and
Alert
are given priority over group settings.
To assign a caller ID image, ringtone, or group, the
contact must be saved to the phone’s memory.
37
Menu functions
Phonebook
(Menu 2)
Group
(Menu 2.4)
Use this menu to organise your contacts in caller
groups.
Adding members to a caller group
1. Select a group.
2. Press <
Add
>.
3. Press [ ] to select the contacts you want.
4. Press <
Add
>.
Managing caller groups
While viewing the group list, press <
Options
> to
access the following options:
•
View
: display the members of the selected group.
•
Add
: add a new group.
•
Edit
: change the properties of the selected group.
•
Send message
: send an SMS, MMS, or e-mail to
the members you want.
•
Delete
: delete the selected group. Group
members, however, will not be deleted from
Phonebook.
Speed dial
(Menu 2.5)
Use this menu to assign speed dial numbers (2 to 9)
for 8 of your most frequently dialled numbers.
Assigning speed dial numbers
1. Scroll to a key location from
2
to
9
. Key
1
is
reserved for your voicemail server.
2. Press <
Options
> and select
Add
→
Contact
or
FDN contact
.
3. Select a contact from the contact list.
4. Select a number, if the contact has more than one
number.
Managing speed dial entries
From the Speed dial screen, press <
Options
> to
access the following options:
•
Add
: assign a number to an unassigned key. You
can select a contact from Phonebook or the FDN
list.
•
View
: check the name and number assigned to
the key.
38
Menu functions
•
Change
: assign a different number to a key.
•
Remove
: clear the speed dial setting for a key.
Dialling speed dial numbers
In Idle mode, press and hold the appropriate key.
My namecard
(Menu 2.6)
Use this menu to create a name card and send it to
other people.
Saving your name card
The procedure for creating your name card is the
same as the one for saving a number in the phone’s
memory.
p. 36
Using name card options
After saving your name card, press <
Options
> to
access the following options:
•
Edit
: edit the name card.
•
Send via
: send the name card via SMS, MMS,
e-mail, or Bluetooth.
•
Exchange namecard
: exchange the name card
with another person via Bluetooth.
•
Remove
: delete the name card.
•
Print via Bluetooth
: print the name card by
connecting the phone to a printer via Bluetooth.
Some printers may not be compatible with the
phone.
Own number
(Menu 2.7)
Use this feature to check your phone numbers, or to
assign a name to each of the numbers. Changes made
here do not affect the actual subscriber numbers on
your SIM card.
Management
(Menu 2.8)
Use this menu to manage contacts in Phonebook.
•
Save new contacts to
: select a default memory
location for saving contacts. If you select
Always
ask
, the phone will ask you to select a memory
location each time you save a number.
•
Copy all
: copy all of the contacts stored on the
SIM card to the phone’s memory, or vice versa.
39
Menu functions
Applications
(Menu 3)
•
List by
: sort your contacts by the first name or
last name.
•
Delete all
: delete all of the contacts from your
phone’s memory, your SIM card, or the FDN list.
•
Memory status
: display the number of contacts
you have stored in Phonebook.
Service number
(Menu 2.9)
Use this menu to view the list of Service Dialling
Numbers (SDN) assigned by your service provider,
including emergency numbers and numbers for
directory enquiries. This menu is available if your SIM
card supports SDN.
1. Scroll to the number you want.
2. Press <
Dial
> or [ ].
Applications
(Menu 3)
Use this menu to play Java applications, play music
files, or edit photos. You can also use the voice
recognition or Bluetooth feature.
To access this menu, press <
Menu
> in Idle mode and
select
Applications
.
Music Player
(Menu 3.1)
Use this menu to enjoy music. First, you need to save
music files in your phone’s memory. To enjoy high
quality music, you can use an optional Bluetooth
stereo headset.
Downloading or receiving music files
Your phone supports *.mp3, *.aac, and *.m4a files
from the phone’s memory.
Use the following methods to save music files to your
phone:
• Download from the wireless web
p. 55
Normal headsets and Bluetooth mono headsets are
not compatible with the music player.
40
Menu functions
• Download from a computer using the optional
Samsung PC Studio programme
Samsung PC
Studio User’s Guide
• Receive via an active Bluetooth connection
p. 51
Creating a play list
Add the music files to the play list so you can play
them.
1. From the music payer screen, press <
Options
>
and select
Add music
.
2. Press [ ] to select the files you want and press
<
Add
>.
Playing music files
1. From the music player screen, press <
Options
>
and select
Play via
.
2. Select
Phone
to use the phone speaker.
Select
Bluetooth stereo headset
to use a
Bluetooth stereo headset, and then search for and
connect the phone to the headset.
During playback, use the following keys:
Key Function
Pauses or resumes playback.
Left Returns to the previous file. Moves
backward in a file when held down.
Right Skips to the next file. Skips forward in a
file when held down.
Up Opens the current play list.
Down Stops playback.
Volume Adjusts the volume.
1
Changes the repeat mode.
2
Changes the playback animation.
3
Sets the music player to play tracks in
random order.
5
Changes the skin image.
41
Menu functions
Applications
(Menu 3)
Using music player options
From the music player screen, press <
Options
> to
access the following options:
•
Play via
: play the selected file via the phone
speaker or a Bluetooth stereo headset.
•
Play
/
Pause
: begin or pause playback.
•
Transfer to Bluetooth stereo headset
/
Transfer to phone
: switch the sound output to a
Bluetooth headset or the phone speaker.
•
Open playlist
: access the current play list or all
play lists.
•
Remove from play list
: remove the selected file
from the play list.
•
Send via
: send the file via e-mail or Bluetooth.
•
Set as
: set the file as your ringtone, as a ringtone
for a Phonebook entry, or as a ringtone for alarms.
•
Settings
: change the default settings for playing
music files.
Repeat mode
: select a repeat mode.
Shuffle
: set the music player to play tracks in
random order.
Visualisation
: change the playback animation.
Skin
: select a skin type.
Volume
: select a volume level.
•
Details
: access the file properties.
•
Shortcuts
: view the functions of the keys you can
use during playback.
Accessing the play list
From the music player screen, press [Up].
Press <
Options
> to access the following options:
•
Play via
: play the selected file via the phone
speaker or a Bluetooth stereo headset.
•
Add music
: add files to the play list.
•
Move track in playlist
: move the selected file to
the position you want within the play list.
•
Go to all playlists
: access all play lists.
•
Move to
: move the selected file to another play
list.
•
Copy to
: copy the selected file to another play list.
•
Remove
: remove the selected file or all files from
the play list.
42
Menu functions
Voice recorder
(Menu 3.2)
Use this menu to record voice memos. A voice memo
can be up to one hour long.
Recording a voice memo
1. Press [ ] to start recording.
2. Speak into the microphone.
Press [ ] to pause or resume the recording.
3. When you have finished, press <
Save
> or
[Down]. The voice memo is automatically saved.
4. Press [ ] to review the voice memo, or [Up] to
record additional memos.
Playing a voice memo
1. From the Voice recorder screen, press <
Options
>
and select
Go to My voice clips
.
2. Select a voice memo. The memo plays.
During playback, use the following keys:
Using voice recorder options
From the Voice recorder screen, press <
Options
> to
access the following options:
•
Record
: record a new voice memo.
•
Go to My voice clips
: access the voice memo list.
•
Settings
: customise the default settings for the
voice recorder:
Recording time
: select a recording time.
-
Limit for multimedia messages
: record a
voice memo for adding to an MMS message.
Key Function
Pauses or resumes playback.
Left Moves backward in a memo.
Right Skips forward in a memo.
Down Stops playback.
Volume Adjusts the volume.
43
Menu functions
Applications
(Menu 3)
-
Limit for emails
: record a voice memo for
adding to an e-mail.
-
1 hour
: record a voice memo of up to one hour.
Volume
: select a volume level.
Default name
: change the default prefix of file
names.
Visualisation
: change the playback animation.
Image editor
(Menu 3.3)
Use this menu to edit your photos using an assortment
of editing tools.
Applying an effect
1. Press <
Options
> and select
New image
→
Open
or
Take photo
.
2. Select a photo or take a new photo.
3. Press <
Load
>, or press <
Options
> and select
Load
.
4. Press <
Options
> and select
Effects
→
an effect
option.
5. Press <
Done
>.
6. Press <
Options
> and select
Save as
.
7. Press <
Yes
>.
8. Enter a new file name and press [ ].
Adding visual features
You can decorate photos by adding a frame, an image,
or a note.
1. Select a photo or take a new photo.
2. Press <
Load
>, or press <
Options
> and select
Load
.
3. Press <
Options
> and select
Insert
→
a feature
type.
•
Frame
: add a decorative frame.
•
Emoticon
: add an emoticon.
•
Clip Art
: add an image clip.
4. Select an item.
5. Adjust the position of the inserted item and press
<
Done
>.
6. Press <
Options
> and select
Save as
.
7. Press <
Yes
>.
8. Enter a new file name and press [ ].
44
Menu functions
Beauty tools
(Menu 3.4)
Use this menu to edit people’s appearances using
various editing tools.
Makeover kits
(Menu 3.4.1)
Use this menu to decorate the appearance of a person
on a photo by using various tools.
1. Press <
Options
> and select
New image
→
Open
or
Take photo
.
2. Select a photo or take a new photo.
3. If you take a new photo, adjust the chin line of the
photo by pressing the Navigation keys.
4. Press <
Options
> and select
Load
.
5. Press <
Options
> and select one of the following
options:
•
New image
: select a photo or take a new
photo.
•
Change
: change the style of the person, such
as hair, beard, and clothing. You can also
change the background of the photo.
•
Make-up
: change the appearance of the
person by using various make-up tools.
•
Combine images
: merge the image with
another image.
•
Undo
: cancel your selection.
6. When you have finished, press <
Options
> and
select
Save as
.
7. Press <
Yes
>.
8. Enter a name for the image and press [ ].
Kid predictor
(Menu 3.4.2)
Use this menu to predict your child’s appearance using
your photo and your significant other’s photo.
1. When the left image field highlights, press
<
Options
> and select
Add image
→
Open
or
Take photo
.
2. Select a photo or take a new photo.
3. If you take a new photo, adjust the chin line of the
photo to recognise the outline of the face by
pressing the Navigation keys.
4. Press <
Options
> and select
Load
.
45
Menu functions
Applications
(Menu 3)
5. When the selected photo appears on the left image
field, press [Right].
6. Press <
Options
> and select
Add image
→
Open
or
Take photo
.
7. Select a photo or take a new photo.
8. If you take a new photo, adjust the chin line of the
photo to recognise the outline of the face by
pressing the Navigation keys.
9. Press <
Options
> and select
Load
.
The selected photo displays on the right image
field.
10. Press [Down] and select the merge ratio you want.
11. Press <
Predict
> and select the child gender you
want. The two images merge.
12. Press <
Done
>.
13. Press <
Options
> and select
Change
or
Make-up
.
You can change the image.
14. When you have finished, press <
Options
> and
select
Save as
.
15. Press <
Yes
>.
16. Enter a name for the image and press [ ].
Memory status
(Menu 3.4.3)
Use this menu to view the amount of memory
currently in use in the Beauty tools menu.
You can also access the face images you have stored
by selecting the
Face images
option from this menu.
Women’s life
(Menu 3.5)
Your phone has special menus, which can be useful for
women in modern world.
Fragrance type
(Menu 3.5.1)
Use this menu to help you choose the fragrance type
best suited for your personal image according to your
own preferences, such as your favourite food and
music, your hobbies, fashion sense, and the places
you love to go.
Creating a profile
1. Press <
Create
>, or press <
Options
> and select
Create
.
46
Menu functions
2. Specify profile parameters:
•
Name
: enter a name for the profile.
•
Food
: select your favourite food.
•
Beverage
: select your favourite beverage.
•
Music
: select your favourite music.
•
Colour
: select your favourite colour.
•
Fashion
: select your favourite fashion style.
•
Hobby
: select your favourite hobby.
•
Weather
: select your favourite weather.
•
Vacation spot
: select where you want to go
for your vacation.
•
Perfume using time
: select when you will to
use perfume.
3. When you have finished, press <
Save
>. The
screen displays the fragrance type for you.
While viewing the fragrance type details, press
<
Options
> to access the following options:
•
Edit
: edit the profile item.
•
Send via multimedia message
: send the
fragrance type via MMS.
•
Delete
: delete the fragrance type.
Using fragrance type options
From the fragrance type list, press <
Options
> to
access the following options:
•
View
: view the fragrance type details.
•
Create
: create a new fragrance type.
•
Delete
: delete the selected fragrance type or all
fragrance types.
Biorhythm
(Menu 3.5.2)
Use this menu to check where you are in your
biorhythm cycle. The biorhythm cycle is based on your
birth date and displays how you are influenced
physically, emotionally, and intellectually by your
biorhythm at a particular moment.
Checking your biorhythm for a specific date
1. From the Biorhythm screen, select
Day view
.
2. Enter the date you want and press [Down].
3. Enter your birth date and press <
OK
>.
The graphics and numbers are displayed indicating
your biorhythm states for that date.
To send the biorhythm via SMS, press <
Options
>
and select
Send via SMS
.
47
Menu functions
Applications
(Menu 3)
Checking your biorhythm for the current month
1. From the Biorhythm screen, select
Month view
.
2. Enter your birth date and press <
OK
>.
Setting an alarm for your biorhythm
1. From the Biorhythm screen, select
Biorhythm
alarm
.
2. Set each alarm option:
•
Set biorhythm alarm
: activate the alarm.
•
Birthday
: enter your birth date.
•
Alarm time
: enter the time for the alarm to
ring.
•
AM/PM
: set
AM
or
PM
in 12-hour time format.
•
Alarm day
: check the days for the alarm.
•
Alarm tone
: select an alarm tone.
3. When you have finished, press <
Save
>.
Height/Weight ratio
(Menu 3.5.3)
Use this menu to measure the percentage by which
you are over or under the ideal weight for your height.
1. Press [Left] or [Right] to select your gender.
2. Enter your height.
3. Enter your weight.
4. Press <
OK
> to view the result.
Press <
Help
> to understand the significance of
the percentage.
Calories
(Menu 3.5.4)
Use this menu to measure calories you have
consumed and burned, based on the amount of work
and/or exercise you have done. You can also check the
total calories consumed for a day.
Saving a calorie item
1. Select a day on the calendar.
2. Press <
Options
> and select
Create
.
3. Press [Left] or [Right] to select your work category
for each option.
As you change a category, the following categories
are displayed differently.
4. Move to the
How long?
field and enter the length
of work time.
5. Press <
Save
>.
48
Menu functions
Accessing a calorie item
When you enter the
Calories
menu, the total calories
consumed for the selected day are displayed at the
bottom of the calendar.
Select a day to view the details.
From the calorie list, press <
Options
> to access the
following options:
•
Change time
: enter the length of work time.
•
Create
: add a new calorie item.
•
Delete
: delete the selected calorie item or all
calorie items.
Pink schedule
(Menu 3.5.5)
Use this menu to check the date of your next ovulation
and the period during which you are most likely to get
pregnant.
1. Enter the first day of your last menstrual period.
2. Enter the average length (in days) of your
menstrual cycle.
3. Press <
OK
>.
4. Press [Left] or [Right] to move the calendar.
Shopping list
(Menu 3.5.6)
Use this menu to make a shopping list by entering
information on items that you want or need to buy and
calculate the total expense.
1. Select a shopping bag.
2. Press <
Add
>.
3. Set the following options for the item:
•
Photos
: assign an image to the item.
•
Item
: enter a name for the item.
•
How much?
: enter the item price. Press [ ]
to insert a decimal point.
•
How many?
: enter the number of the items.
4. When you have finished, press <
Save
> to add the
item to the bag.
From the item list on a shopping bag, press
<
Options
> to access the following options:
•
Edit
: edit information about the item.
•
Add
: add a new item to the bag.
•
Delete
: remove the selected item or all items from
the bag.
49
Menu functions
Applications
(Menu 3)
Bluetooth
(Menu 3.6)
Using Bluetooth wireless, you can connect the phone
wirelessly to other Bluetooth devices and exchange
data with them, talk hands-free, or control the phone
remotely.
Bluetooth technology allows free wireless connections
between all Bluetooth-compliant devices within a
range of 10 metres. Since the devices communicate
using radio waves, they do not need to be in line of
sight to each other.
Setting up the Bluetooth feature
The
Bluetooth
menu provides the following options:
•
Activation
: activate or deactivate the Bluetooth
feature.
•
My devices
: search for connectable Bluetooth
devices.
•
My phone’s visibility
: allow other Bluetooth
devices to connect to your phone.
•
My phone’s name
: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
•
Secure mode
: determine if the phone asks for
your confirmation when other devices access your
data.
•
Bluetooth services
: display available Bluetooth
services.
• If there are obstacles between the devices, the
maximum operating distance may be reduced.
• It is recommended that you do not use the
Bluetooth feature while using multimedia features
such as voice recorder, camera, and music player,
or vice versa, for better performance.
• Some devices may not be compatible with your
phone.
50
Menu functions
Searching for and pairing with a Bluetooth
device
1. From the
Bluetooth
menu, select
My devices
.
2. Select
Search new device
.
After searching, a list of devices to which you can
connect displays. The following icons indicate the
kind of device:
The colour of the icon indicates the status of the
device:
• Grey for unpaired devices
• Blue for paired devices
• Red for devices that are currently connected to
your phone
3. Select a device.
4. Enter a Bluetooth PIN and press <
OK
>.
This code
is used just once and you do not need to memorise it.
When the owner of the other device enters the
same code, pairing is finished.
Using device options
From the device list, press <
Options
> to access the
following options:
•
Connect
: connect to a headset or hands-free car
kit.
•
Disconnect
: end the connection with the
connected device.
•
Browse files
: search for data from the device and
import data directly to your phone.
•
Service list
: access the Bluetooth service list of
the device.
• Stereo headset • Mobile phone
• Computer • PDA
• Unknown device • Printer
• Mono headset/Hands-free car kit
Some devices, especially headsets or hands-free car
kits, may have a fixed Bluetooth PIN, such as
0000
.
If the other device has one, you must enter the
code.
51
Menu functions
Applications
(Menu 3)
•
Rename
: rename the paired device.
•
Authorise device
/
Unauthorise device
:
determine whether or not the phone asks you to
permit connection when other devices try to
connect to your phone.
•
Delete
: remove the selected device or all devices
from the list.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item you want
to send is stored.
3. Scroll to the item you want and press <
Options
>.
4. Select
Send
via
→
Bluetooth
.
The phone searches for devices within range and
displays a list of available devices.
5. Select a device.
6. If necessary, enter the Bluetooth PIN needed for
pairing and press <
OK
>.
Receiving data via Bluetooth
To receive data via Bluetooth, your phone’s Bluetooth
feature must be active and its visibility must be
enabled.
If an unauthorised Bluetooth device sends data to your
phone, the phone displays a confirmation message. To
receive data, press <
Yes
>.
Java world
(Menu 3.7)
Use this menu to access the embedded Java games
and downloaded Java applications.
Playing a game
Select a game from the game list and follow the
onscreen instructions. The procedure may differ from
game to game.
52
Menu functions
Using Java application options
From the application list, press <
Options
> to access
the following options:
•
Start
: launch the selected application.
•
Delete
: delete the selected application.
•
Details
: access the application properties.
•
Permission
: set permission settings for services
charging you additional costs, such as network
access and SMS.
•
Lock
/
Unlock
: lock the application to protect it
from being deleted, or unlock the application.
•
Upgrade
: upgrade the application to the latest
version, except for embedded games.
•
Send information via Text message
: send the
URL containing the application via SMS, except for
embedded games.
•
Memory status
: access memory information for
applications.
•
Network settings
:
customise a connection profile
to be used for applications requiring network
access. The following options are available:
APN
: enter the access point name of the network
gateway.
Login ID
: enter the user ID.
Password
: enter the password.
Proxy
: select whether or not the phone uses a
proxy server to launch the web browser.
Proxy settings
: customise the following proxy
settings:
When the proxy is set to
Enable
:
-
IP address
: enter the gateway address.
-
Port
: enter the port number.
When the proxy is set to
Disable
:
-
DNS1
: enter the primary address.
-
DNS2
: enter the secondary address
.
53
Menu functions
Applications
(Menu 3)
Voice commands
(Menu 3.8)
Your phone provides a set of powerful voice-enabled
features that enhance its hands-free capabilities.
Dialling a number by voice
1. Access the
Voice commands
menu, or press [
C
]
in Idle mode to activate voice recognition.
2. At the voice prompt, say “Call.”
3. Say a name or phone number.
Speak into the microphone for best results.
4. When the phone asks for confirmation, say “Yes” to
confirm the name or number
5. You can also use one of the following commands:
•
No
to skip to another name or number.
•
Repeat
to start over with another command.
•
Cancel
to end the voice recognition.
6. Say the number type you want if the name has
more than one number.
Accessing features
1. Access the
Voice commands
menu, or press [
C
]
in Idle mode to activate voice recognition.
2. At the voice prompt, say one of the following
commands:
•
Send SMS
: send an SMS message.
•
Lookup
: access contact details.
•
Go To
: access a menu.
•
Check
: check the signal status, remaining
battery power, and your phone number.
3. Follow the corresponding menu procedure.
You can quickly access this function by
pressing and holding the right soft key in
Idle mode.
54
Menu functions
Setting up options
Use this menu to customise various settings for voice
recognition.
From the
Voice commands
menu, press <
Settings
>
to access the following options:
•
Choice lists
: set the phone to require
confirmation of your voice commands when using
voice dialling or accessing Phonebook.
Automatic
: the phone asks for confirmation when
results are not clear.
Always on
: the phone asks for confirmation at all
times.
Always off
: the phone does not require
confirmation.
•
Sensitivity
: adjust the sensitivity level of your
phone to better recognise your voice.
•
Digit dialling
: set the phone to recognise your
voice for voice recognition, and also to reset
settings.
Select location
: select a country in which you
speak the language.
Adapt digits
: adapt your phone to recognise your
vocal style and pronunciation for each digit. Follow
the voice prompts to adapt the phone.
Reset digits
: return to default settings.
•
Sound
: configure sound settings for voice
recognition.
Prompts
: turn on or off audio prompts.
Digits
: set whether the phone asks for digit
command confirmation.
Names
: set whether the phone asks for name
command confirmation.
Name settings
: adjust the speaking speed and
volume for your name commands.
•
About
: display information about the voice
command programme.
Viewing help information
You can view onscreen help information for using voice
recognition. From the
Voice commands
menu, press
<
Help
>.
55
Menu functions
Browser
(Menu 4)
SIM-AT
(Menu 3.9)
This menu is available if you use a SIM-AT card that
supports SIM Application Toolkit menus and provides
additional services, such as news, weather, sports,
entertainment, and location services. Available
services may vary, depending on your service
provider’s plans. For details, see your SIM card
instructions or contact your service provider.
Browser
(Menu 4)
The Wireless Application Protocol (WAP) on your
phone allows you to access the wireless web. Using
the web browser, you can access up-to-date
information and a wide variety of media content, such
as wallpapers, ringtones, and music files.
To access this menu, press <
Menu
> in Idle mode and
select
Browser
.
Home
(Menu 4.1)
Use this menu to connect your phone to the network
and load the homepage of the wireless web service
provider. You can also press [ ] in Idle mode.
Navigating the web browser
To Press
scroll through browser items [Up] or [Down].
select a browser item < > or [ ].
return to the previous page <
Back
> or [
C
].
return to the homepage and hold [
C
].
56
Menu functions
Using browser options
1. Select or press
[
]
.
2. Select one of the following browser options:
•
Back
: go back to the previous page.
•
Home
: go back to the homepage.
•
Exit
: exit the web browser.
•
Reload
: reload the current page.
•
Show URL
: display the URL address of the
current web page.
•
About ...
: access version and copyright
information about the browser.
Accessing other phone menus
From any web page, press
[
]
to access the following
options:
•
Enter URL
: enter a URL address manually.
•
Bookmarks
: switch to the
Bookmarks
menu.
•
Messages
: check the messages stored in the
My
messages
folder. You can also create and send a
new SMS message.
•
My files
: switch to the
My files
menu.
Exiting the browser
Press [ ] to end the network connection and exit the
browser.
Bookmarks
(Menu 4.2)
Use this menu to save URL addresses in order to
quickly access web pages, or access the preset
bookmarks.
Adding a bookmark
1. Select an empty location.
2. Enter a title for the bookmark and press [Down].
3. Enter a URL address and press [ ].
Accessing a bookmarked page
Selecting a bookmark item launches the web browser
and accesses the associated web page.
57
Menu functions
Browser
(Menu 4)
Using bookmark options
On the Bookmark screen, press <
Options
> to access
the following options:
•
Open
: access the website.
•
Edit
: edit the address and name of the bookmark.
•
Delete
: delete the selected bookmark or all
bookmarks.
Enter URL
(Menu 4.3)
Use this menu to manually enter the URL address of a
website and access the website.
Clear cache
(Menu 4.4)
Use this menu to clear the cache, which is a temporary
memory site that stores recently accessed web sites.
Profile settings
(Menu 4.5)
Use this menu to set up servers for the web browser.
Contact your service provider for details about your
setting options.
For each server, the following options are available:
•
Profile
name
: assign a name to the server profile.
•
Home
URL
: enter the address of your homepage.
•
Bearer
: select a bearer for each type of network
address accessed.
•
Proxy
: select whether or not the phone uses a
proxy server to launch the web browser.
•
GPRS settings
: customise the GPRS network
settings:
When the proxy is set to
Enable
:
Proxy IP
: enter the web gateway address.
Proxy port
: enter the port number.
APN
: enter the access point name of the GPRS
network gateway.
Login ID
: enter the user ID.
58
Menu functions
Password
: enter the password.
When the proxy is set to
Disable
:
DNS1
: enter the primary address.
DNS2
: enter the secondary address
.
APN
: enter the access point name of the GPRS
network gateway.
Login ID
: enter the user ID
.
Password
: enter the password
.
•
GSM settings
: customise the following GSM
network settings:
When the proxy is set to
Enable
:
Proxy IP
: enter the web gateway address.
Proxy port
: enter the port number.
Dial number
: enter the PPP server phone number.
Login ID
: enter the user ID.
Password
: enter the password.
Data call type
: select a data call type.
When the proxy is set to
Disable
:
DNS1
: enter the primary address.
DNS2
: enter the secondary address.
Dial number
: enter the PPP server phone number.
Login ID
: enter the user ID.
Password
: enter the password.
Data call type
: select a data call type.
Current profile
(Menu 4.6)
Use this menu to activate one of the proxy servers you
have set up.
59
Menu functions
Messages
(Menu 5)
Messages
(Menu 5)
Use the
Messages
menu to send and receive short
messages, multimedia messages, and e-mails. You
can also access push messages, voicemails, and cell
broadcast messages.
To access this menu, press <
Menu
> in Idle mode and
select
Messages
.
Create new message
(Menu 5.1)
Use this menu to create and send text messages,
multimedia messages, or e-mails.
Text message
(Menu 5.1.1)
Short Message Service (SMS) allows you to send or
receive text messages including pictures, audio clips,
and animated images.
Creating and sending an SMS message
1. Enter your message and press [ ].
2. Enter a destination number.
To send the message to more than one recipient,
fill in additional destination fields.
3. Press [ ] to send the message.
Using options while composing an SMS message
While composing a message, press <
Options
> to
access the following options:
•
Send only
: send the message.
•
Save and send
: save the message in
Outbox
and
then send it.
• The maximum number of characters allowed
in a message varies by service provider. If
your message exceeds the maximum number
of characters, the phone will split the
message.
• You can use various options by pressing
<
Options
>.
next section
60
Menu functions
•
Preview as vivid message
: view the message in
3D view mode. The phone coverts message text to
3D vivid graphics. This option is available only
when the message consists of a single page.
•
Insert
: add a text template, Phonebook entry, or
bookmark.
•
Add picture
/
Add animation
/
Add melody
:
attach a simple image, an animated image, or a
melody.
•
Attach
: add a name card or calendar data as a
data format attachment.
•
Save in
: save the message in another message
folder.
•
Input language
: change the language to be used
in T9 input mode.
•
Text style
: change the text attributes.
Multimedia message
(Menu 5.1.2)
Multimedia Message Service (MMS) delivers messages
containing a combination of text, image, video, and
audio, from phone to phone or from phone to e-mail.
Creating and sending an MMS message
1. Select the
Subject
line.
2. Enter the message subject and press [ ].
3. Select the
Image or video
line.
4. Select
Add image
or
Add video
and add an
image or a video clip.
5. Select the
Sound
line.
6. Select
Add sound
and add a sound clip.
You can use various options by pressing
<
Options
> in each field.
next section
• The maximum size allowed for a message can
differ, depending on your service provider.
• Depending on the file type or DRM (Digital
Rights Management) system, some files may
not be able to be forwarded.
61
Menu functions
Messages
(Menu 5)
7. Select the
Text
line.
8. Enter the message text and press [ ].
9. When you have finished, press <
Options
> and
select
Send
.
10. Enter a phone number or an e-mail address.
To send the message to more than one recipient,
fill in additional destination fields.
11. Press [ ] to send the message.
Using options while composing an MMS message
While composing a message, press <
Options
> to
access the following options:
•
Add
: add the message subject or message text.
•
Add image
/
Add video
/
Add sound
: add an
image, a video clip, or a sound clip.
•
Change image
/
Change video
/
Change sound
:
replace an added item.
•
Edit
: edit the subject or text.
•
Preview
: view the message as it will be shown on
the recipient’s phone.
•
View
: open the selected attachment.
•
Send
: send the message.
•
Save in
: save the message in another message
folder.
•
Add page
: add pages. Move to each page by
pressing [Left] or [Right].
•
Delete page
: delete a page.
•
Edit page
: change the duration of page display or
move the page forward or backward among the
other pages.
•
Attach
: attach a Phonebook entry as a name card
or calender data or memos as a data format
attachment, or a document file stored in the
Other
files
folder.
•
Remove subject
/
Remove text
/
Remove media
/
Remove sound
/
Remove
: remove an added item.
Attached files from the
Other files
folder cannot
be open in your phone.
62
Menu functions
Email
(Menu 5.1.3)
You can create and send e-mails that include text,
audio, and images. To use this feature, you need to
subscribe to an e-mail service and set up your e-mail
account and profile.
p. 73, p. 75
Creating and sending an e-mail
1. Select the
Subject
line.
2. Enter the subject of your e-mail and press [ ].
3. Select the
Message
line.
4. Enter the e-mail text and press [ ].
5. Select the
File attach
line.
6. Add media files, document files stored in the
Other files
folder, or Phonebook entries as name
cards or calender data as data format
attachments.
7. When you have finished, press <
Options
> and
select
Send
.
8. Enter an e-mail address.
To send the e-mail to more than one recipient, fill
in additional destination fields.
9. Press [ ] to send the e-mail.
Using options while composing an e-mail
While composing an e-mail, press <
Options
> to
access the following options:
•
Add
: add the subject of your e-mail or e-mail text.
•
Edit
: edit the subject or text.
•
Add image
/
Add videos
/
Add sounds
/
Add
music
: add media files stored in the phone’s
memory.
•
Add other file
: add document files stored in the
Other files
folder.
•
View
/
Play
: open the selected attachment.
•
Send
: send the e-mail.
You can use various options by pressing
<
Options
> in each field.
next section
Depending on the file type or DRM (Digital
Rights Management) system, some files may not
be able to be forwarded.
Attached files from the
Other files
folder cannot
be open in your phone.
63
Menu functions
Messages
(Menu 5)
•
Save in
: save the e-mail in another message
folder.
•
Attach
: attach Phonebook entries as name cards
or calender data or memos as data format
attachments.
•
Remove subject
/
Remove message
: clear the
subject or text.
•
Remove
: delete the selected attachment or all
attachments.
•
Remove all attachments
: delete all
attachments.
My messages
(Menu 5.2)
Use this menu to access messages you have received,
sent, or which have failed in sending.
Inbox
(Menu 5.2.1)
This folder stores all of the messages you have
received, except for e-mails.
Viewing a message
The following icons may appear on the message list to
show the message type:
• SMS
• MMS
• MMS notification
• Push message
Using message options
While viewing a message, press <
Options
> to access
the following options:
SMS messages
•
Reply via
: send a reply to the sender via SMS or
MMS.
•
Forward
: forward the message to other people.
A
!
icon next to a message means that the message
is of high priority. A grey-coloured message icon
indicates low priority.
64
Menu functions
•
View as vivid message
/
View as text message
:
view the message in 3D view mode or switch back
to normal mode. This option is available only when
the message consists of a single page.
•
Delete
: delete the message.
•
Move to phone
/
Move to SIM
: move the
message between the SIM card and the phone’s
memory.
•
Add to block list
: add the sender’s number to the
Block list to reject the messages from the sender.
•
Attached items
: save media content from the
message into your phone’s memory.
•
Cut
address
: extract URL addresses, e-mail
addresses, or phone numbers from the message.
•
Print via Bluetooth
: print the message by
connecting the phone to a printer via Bluetooth.
Some printers may not be compatible with the
phone.
•
Lock
/
Unlock
: lock the message to protect it from
being deleted, or unlock the message.
MMS messages
•
Retrieve
: retrieve the MMS message from the
server.
•
Reply via text message
: send a reply to the
sender via SMS.
•
Reply via multimedia message to
: send a reply
via MMS to the sender or all recipients.
•
Forward
: forward the message to other people.
•
Delete
: delete the message or all messages.
•
Add to block list
: add the sender’s number to the
Block list to reject the messages from the sender.
•
Attached items
: save media contents from the
message to your phone’s memory.
•
Cut
address
: extract URL addresses, e-mail
addresses, or phone numbers from the message.
•
Lock
/
Unlock
: lock the message to protect it from
being deleted, or unlock the message.
•
Details
: access the message properties.
65
Menu functions
Messages
(Menu 5)
Push messages
•
Go to URL
: connect to the URL address specified
in the message.
•
Delete
: delete the message.
•
Cut address
: extract URL addresses, e-mail
addresses, or phone numbers from the message.
Configuration messages
•
Install
: apply the configuration value in the
message to the phone.
•
Cut address
: extract URL addresses, e-mail
addresses, or phone numbers from the message.
•
Delete
: delete the message.
•
Lock
/
Unlock
: lock the message to protect it from
being deleted, or unlock the message.
Draft
(Menu 5.2.2)
This folder stores messages you have saved to send at
a later time.
When you select an SMS or e-mail message, it opens
in Edit mode so that you can edit and/or send the
message.
When you select an MMS message, it opens in Preview
mode as would a message from the Inbox. To edit the
MMS message, press <
Options
> and select
Edit
.
Outbox
(Menu 5.2.3)
This folder stores messages that the phone is
attempting to send or has failed to send.
While viewing a message, press <
Options
> to access
the following options:
•
View
/
Play
: open the selected file.
•
Save to My files
: save the selected file.
•
Send again
: retry sending the message.
•
Forward
: forward the message to other people.
•
Delete
: delete the message.
•
Move to phone
/
Move to SIM
: move the
message between the SIM card and the phone’s
memory.
•
Print via Bluetooth
: print the message by
connecting the phone to a printer via Bluetooth.
Some printers may not be compatible with the
phone.
66
Menu functions
•
Lock
/
Unlock
: lock the message to protect it from
being deleted, or unlock the message.
•
Details
: access the message properties.
Sentbox
(Menu 5.2.4)
This folder stores messages that you have sent
successfully.
While viewing a message, press <
Options
> to access
the following options:
•
View
/
Play
: open the selected file.
•
Save to My files
: save the selected file.
•
Forward
: forward the message to other people.
•
Cut address
: extract URL addresses, e-mail
addresses, or phone numbers from the message.
•
Delete
: delete the selected message.
•
Move to phone
/
Move to SIM
: move the
message between the SIM card and the phone’s
memory.
•
Print via Bluetooth
: print the message by
connecting the phone to a printer via Bluetooth.
Some printers may not be compatible with the
phone.
•
Lock
/
Unlock
: lock the message to protect it from
being deleted, or unlock the message.
•
Details
: access the message properties.
Email inbox
(Menu 5.2.5)
This folder stores e-mails that you have received.
Viewing an e-mail
1. Press <
Select
> when
Check new mail
displays.
The phone checks the e-mail server and downloads
new e-mails.
The following icons may appear on the list to show
the e-mail status:
• Retrieved from the server
• Being retrieved
• Failed to be retrieved
2. Select an e-mail or a header.
A ! icon next to a message means that the e-
mail is of high priority. A grey-coloured e-mail
icon indicates low priority.
67
Menu functions
Messages
(Menu 5)
3. Press [Volume] to view other pages in the e-mail.
Press and hold [Volume] to move to the first or last
page in the e-mail.
4. Press
[
] or
[
]
to view the next or previous
e-mail.
Using e-mail options
While viewing the e-mail or header, press <
Options
>
to access the following options:
•
Retrieve
: retrieve the body of the e-mail from the
e-mail server.
•
View
/
Play
: open the selected file.
•
Save to My files
: save the selected file.
•
Reply to
: send a reply to the sender or all
recipients.
•
Forward
: forward the e-mail to other people.
•
Delete
: delete the e-mail from the phone’s
memory or from both the phone’s memory and the
e-mail server.
•
Add to block list
: add the sender’s e-mail
address or subject to the Block list to reject
e-mails from that address or containing that
subject.
•
Cut address
: extract URL addresses, e-mail
addresses, and phone numbers.
•
Attached items
: save the selected attachment or
all attachments from the e-mail to your phone’s
memory.
•
Print via Bluetooth
: print the message by
connecting the phone to a printer via Bluetooth.
Some printers may not be compatible with the
phone.
•
Lock
/
Unlock
: lock the message to protect it from
being deleted, or unlock the message.
•
Details
: access the e-mail properties.
68
Menu functions
My folder
(Menu 5.2.6)
Use this menu to view the messages you have moved
to this folder using the
Move to my folder
option
while viewing a message list.
Templates
(Menu 5.3)
Use this menu to make and use templates of
frequently used messages or passages.
Text template
(Menu 5.3.1)
You can create SMS templates with the sentences you
use frequently so that you can retrieve and insert
them when composing an SMS message.
Creating a template
1. Select an empty location.
2. Enter a message and press [ ].
Using template options
From the template list, press <
Options
> to access
the following options:
•
Edit
: edit the template.
•
Send
: create and send a new message via SMS,
MMS, or e-mail using the template.
•
Delete
: delete the selected template.
Multimedia message templates
(Menu 5.3.2)
You can access embedded MMS templates or ones you
have saved so that you can use them in composing an
MMS message.
Creating a template
1. Press <
Options
> and select
Add new
.
2. Create a template as you would when creating an
MMS message.
3. Press <
Options
> and select
Save in
→
Templates
.
69
Menu functions
Messages
(Menu 5)
Using template options
From the template list, press <
Options
> to access
the following options:
•
View
: open the selected template.
•
Send
: send the selected template.
•
Edit
: edit the selected template.
•
Add new
: add a new template.
•
Delete
: delete the selected template or all
templates. You cannot delete the embedded
templates.
Delete all
(Menu 5.4)
Use this menu to delete all messages in each message
type at once.
1. Press [ ] to select the message folders to be
cleared.
2. Press <
Delete
>.
3. Press <
Yes
> to confirm the deletion.
Settings
(Menu 5.5)
Use this menu to set up various options for using the
messaging service.
Text messages
(Menu 5.5.1)
You can configure default SMS settings.
•
Sending options
: set up the options for sending
SMS messages:
Reply path
: send a read-reply request along with
your messages.
Request delivery receipt
: set the network to
inform you when messages have been delivered.
Character support
: select a character encoding
type. When you select
Auto
, the phone switches
the encoding type from GSM-alphabet to Unicode if
you enter an Unicode character. Use of Unicode
encoding will reduce the maximum number of
characters in a message to about half. If this menu
is not shown, your phone provides the automatic
character encoding by default.
70
Menu functions
Validity period
: set the length of time your
messages are stored in the SMS server.
Message type
: set the default message type. The
network can convert messages into the selected
format.
Service centre
: store or change the number of
SMS server.
•
Receiving options
: activate 3D view mode for
displaying received messages. The phone will
convert message text to 3D vivid graphics. This
option is available only when the message consists
of a sigle page.
•
Block number
: store the phone numbers from
which you want to reject SMS messages.
Multimedia messages
(Menu 5.5.2)
You can configure default MMS settings.
•
Sending options
: set up the options for sending
MMS messages:
Request delivery receipt
: set the network to
inform you when your messages have been
delivered.
Address hiding
: set your address to be hidden
from the recipient’s phone.
Request read receipt
: send a read-reply request
along with your messages.
Priority
: set the priority level of your messages.
Expiry
: set the length of time your messages are
stored in the MMS server.
Delivery time
: set a time delay before messages
are sent.
•
Receiving options
: set up the options for
receiving MMS messages:
Anonymous reject
: reject messages from
unknown senders.
Advert allowed
: accept advertisements.
Report allowed
: set the network to inform the
sender when a message has been delivered to you.
Home network
: determine if your phone
retrieves new messages automatically when you
are in your home service area.
71
Menu functions
Messages
(Menu 5)
Network when abroad
: determine if your phone
retrieves new messages automatically when you
are roaming on another network.
Reception within home network or abroad has the
following options:
-
Automatic
: the phone automatically retrieves
messages from the server.
-
Reject
: the phone rejects all messages.
-
Manual
: the phone displays notifications. Use
the
Retrieve
option to manually download new
messages.
•
Multimedia message profile
: set up an MMS
profile and select a profile to be used.
Current profile
: select a profile.
Profile settings
: configure MMS profiles using
different MMS servers:
-
Profile name
: assign a name to the MMS profile.
-
Server URL
: enter the address of your MMS
server.
-
Proxy
: connect to the GPRS network using the
proxy server.
-
GPRS settings
: customise the settings required
for connecting to the GPRS network.
when the proxy is set to
Enable
:
IP address
: enter the gateway address.
Port
: enter the port number.
APN
: enter the access point name used for the
address of the GPRS network.
Login ID
: enter the user ID.
Password
: enter the password.
when the proxy is set to
Disable
:
DNS1
: enter the primary address.
DNS2
: enter the secondary address.
APN
: enter the access point name used for the
address of the GPRS network.
Login ID
: enter the user ID.
Password
: enter the password.
72
Menu functions
-
Version
: select an available OMA version and
maximum size limit for sending or receiving
messages.
•
Block number
: specify phone numbers from
which messages will not be accepted. Numbers
specified here are also included in the SMS
blocking list.
•
Message class
: select the type of message
content you will add or the message size.
Text only
: you can add only text of up to 30 KB.
Small imaging
: you can add any type of item,
except for video, of up to 30 KB.
Moderate imaging
: you can add any type of
item, except for video, of up to 100 KB.
Small video
: you can add any type of item of up
to 100 KB.
Moderate video
: you can add any type of items
of up to 300 KB.
•
Creation mode
: select an MMS creation mode.
Warning
: you can create a message with any type
of content and of any size, but the phone will
inform you when the content and size have
exceeded the maximum.
Free
: you can create a message with any type of
contents and of any size.
Restricted
: you can create a message with the
type of content and size specified in
Message
class
.
Emails
(Menu 5.5.3)
You can configure default e-mails settings.
•
Sending options
: set up the options for sending
e-mails:
Send copy to self
: send a copy of your e-mail to
your e-mail account.
Request delivery receipt
: set the network to
inform you when e-mails have been delivered.
Depending on your service provider, it may not
be possible to support the maximum limit
300KB. In this case, try again after changing
the setting to 100KB.
You cannot change e-mail profile and account
settings while an e-mail is being sent or retrieved.
73
Menu functions
Messages
(Menu 5)
Request read receipt
: send a read-reply request
for a reply along with e-mails.
Priority
: select the priority level of your e-mail.
Add signature
: attach your name, phone number,
or a simple memo to e-mails.
Edit name
: enter the name in your signature.
Edit telephone number
: enter the phone number
in your signature.
Edit note
: enter the tag line in your signature.
•
Receiving options
: set up the options for
receiving e-mails:
Check interval
: determine how often the phone
checks the server for incoming e-mails. If you
select
Not used
, you can use the Check new mail
feature to receive new e-mails manually.
Send read receipt
: determine whether or not the
phone sends a read-reply for incoming e-mails. If
you select
Announce
, the phone asks you to send
a read-reply.
Retrieve option
: set whether the phone
downloads e-mail headers only or e-mail headers
and bodies both.
Delete option
: determine whether e-mails are
deleted immediately or the next time you connect
to the server.
Download limit
: determine the maximum size for
incoming e-mails. Your phone will reject e-mails
that exceed the specified size.
Keep in server
: leave the copies of e-mails in the
server after retrieving.
•
Email accounts
: set up an e-mail account and
select an account to be used:
Current account
: select an account.
Account settings
: configure e-mail accounts
using different e-mail servers. Press <
Create
>, or
press <
Options
> and select
Create
, if one has
already been saved.
-
In use
: select this option to use the account and
to display the account in
Email inbox
.
74
Menu functions
-
Account name
: enter a name for the currently
selected account.
To access the following options, press <
Options
>
and select
Next
or press [ ].
-
User name
: enter a user name.
-
Email address
: enter your e-mail address.
-
Reply address
: enter your e-mil address to be
used when the recipient sends a reply.
To access the following options, press <
Options
>
and select
Next
or press [ ].
-
SMTP server
: enter the IP address or host name
of the outgoing e-mail server.
-
SMTP port
: enter the SMTP port number.
-
SMTP user ID
: enter the SMTP user name.
-
SMTP password
: enter the SMTP password.
-
Secure connection (SMTP)
: use a secure
connection for the e-mail service.
-
Retrieve server type
: select the protocol for
the incoming e-mail server. The remaining
options depend on the protocol type setting.
When the protocol type is
POP3
:
-
POP3 server
:
enter the IP address or host name
of the server that receives your e-mail.
-
POP3 port
: enter the POP3 port number.
-
Same ID and password
: select if you want to
have the same user ID and password with the
outgoing e-mail server.
-
POP3 user ID
: enter the POP3 user name.
-
POP3 password
: enter the POP3 password.
-
APOP login
: connect to the server by using the
APOP login scheme when this option is selected.
-
Secure connection (POP3)
: use a secure
connection for the e-mail service.
When the protocol type is
IMAP4
:
-
IMAP4 server
: enter the IP address or host
name of the server that receives your e-mail.
-
IMAP4 port
: enter the IMAP4 port number.
-
Same ID and password
: select if you want to
have the same user ID and password with the
outgoing e-mail server.
75
Menu functions
Messages
(Menu 5)
-
IMAP4 user ID
: enter the IMAP4 user name.
-
IMAP4 password
: enter the IMAP4 password.
-
Secure connection (IMAP4)
: use a secure
connection for the e-mail service.
-
Include attachments
: select this option to
receive attachments with e-mails.
-
Email retrieval limit
: set the number of
headers you will retrieve from the server.
When you have finished, press <
Options
> and
select
Save
or press [ ].
•
Email profiles
: set up an e-mail profile and select
a profile to be used.
Current profile
: select a profile.
Profile settings
: configure e-mail profiles using
different e-mail servers. Set the options for each
profile:
-
Profile name
: enter a name for the e-mail
profile.
-
APN
: enter the access point name used for the
GPRS network address.
-
Login ID
: enter the user ID.
-
Password
: enter the password.
-
DNS1
: enter the primary address.
-
DNS2
: enter the secondary address.
•
Block list
: specify e-mail addresses or subjects
you want to reject.
Push message
(Menu 5.5.4)
You can change the settings for receiving push
messages from the wireless web server.
•
Receive
: set how your phone receives push
messages.
•
Service centre
: enter the address of the server
from which you want to receive push messages.
76
Menu functions
Broadcast messages
(Menu 5.6)
The cell broadcast service delivers short messages on
various topics such as the weather or traffic.
Use this menu to change the settings for the service
and to access broadcast messages.
•
Read
: open received broadcast messages.
The
Temporary
box saves network messages until
the phone is switched off. Press <
Options
> and
select
Save
when a text notification appears to
save to the
Archive
box.
The
Archive
box saves network messages
indefinitely.
•
Activation
: select to receive broadcast messages,
or not.
•
Receiving channels
: indicate the channels from
which you wish to receive broadcast messages.
Please contact your service provider for further
details.
•
Language
: select the preferred languages in
which broadcast messages display.
Memory status
(Menu 5.7)
Use this menu to view the amount of memory
currently in use in each message folder.
You can also access a message box by selecting it
from this menu.
My files
(Menu 6)
The
My files
menu allows you to access images,
videos, music files, and sound clips stored in the
phone’s memory.
To access this menu, press <
Menu
> in Idle mode and
select
My files
.
As a result of the Digital Rights Management (DRM)
system, some of the media items you download
from the Internet or receive by MMS may require a
license key to access them.
77
Menu functions
My files
(Menu 6)
Images
(Menu 6.1)
This menu displays photos you have taken and images
you have downloaded, received in messages, or
imported from a computer.
Viewing an image
1. Select an image folder.
2. Select an image.
Viewing a slide show
You can view your images as a slide show, a sequential
presentation of each image in the current folder.
1. Select an image folder.
2. Press <
Options
> and select
Create
slide show
.
3. Select a time interval. The slide show begins.
4. Press <
Back
> to stop the slide show.
Using image options
While viewing an image, press <
Options
> to access
the following options:
•
List
: return to the image list.
•
Send via
: send the file via MMS, e-mail, or
Bluetooth.
•
Set as
: set the image as your wallpaper for the
displays or as a caller ID image for a Phonebook
entry.
•
Edit
: edit the image using the Image editor if it is
a photo taken by the camera on the phone.
p. 43
•
Move to Favourite images
/
Move to
: move the
file to another folder.
•
Delete
: delete the selected file.
•
Rename
: change the file name.
•
Create
slide show
: view all image as a slide
show.
•
Bluetooth visibility
: share the file with other
Bluetooth devices.
•
Print via
: print the image by connecting the
phone to a printer via USB or Bluetooth. Some
printers may not be compatible with the phone.
•
Lock
/
Unlock
: lock the file to protect it from being
deleted, or unlock the file.
78
Menu functions
•
Details
: access the file properties.
Videos
(Menu 6.2)
This menu displays video clips you have recorded,
downloaded, received in messages, or imported from
a computer.
Playing a video clip
1. Select a video folder.
2. Select a video clip.
During playback, use the following keys:
After playback, press < > to access the following
options:
•
Play
: play the selected file.
•
Send via
: send the selected file via MMS, e-mail,
or Bluetooth.
•
Move to Favourite videos
/
Move to
: move the
file to another folder.
•
Delete
: delete the selected file.
•
Rename
: change the file name.
•
Bluetooth visibility
: share the selected file with
other Bluetooth devices.
•
Lock
/
Unlock
: lock the file to protect it from being
deleted, or unlock the file.
•
Details
: access the file properties.
Video clips recorded on other devices, such as
camcorders, may not play correctly.
Key Function
Pauses or resumes playback.
Left Returns to the previous file. Moves
backward in a file when held down.
Right Skips to the next file. Skips forward in a
file when held down.
Up Opens the file list.
Down Stops playback.
Volume Adjusts the volume.
Key Function
79
Menu functions
My files
(Menu 6)
Music
(Menu 6.3)
This menu displays music files you have downloaded,
or imported from a computer.
1. Select
Music
.
2. Select a file. The music player opens.
p. 40
Sounds
(Menu 6.4)
This menu displays the voice memos you have
recorded, and sound clips you have downloaded,
received in messages, or imported from a computer.
Playing a sound clip
1. Select a sound folder.
2. Select a sound clip. For a voice memo, see
Voice
recorder
.
p. 42
Using sound options
While playing a sound clip, press <
Options
> to
access the following options:
•
List
: return to the sound list.
•
Send via
: send the selected file via MMS, e-mail,
or Bluetooth.
•
Set as
: set the file as your ringtone, as a ringtone
for a Phonebook entry, or a ringtone for alarms.
•
Move to Favourite sounds
/
Move to
: move the
file to another folder.
•
Delete
: delete the file.
•
Rename
: change the file name.
•
Bluetooth visibility
: share the currently selected
file or the files you want with other Bluetooth
devices.
•
Lock
/
Unlock
: lock the file to protect it from being
deleted, or unlock the file.
•
Details
: access the file properties.
Other files
(Menu 6.5)
Files that you have received but which are not
supported by your phone are stored in this folder. You
cannot open these files on the phone.
From the file list, press <
Options
> to access the
following options:
•
Send via
: send the file via MMS, e-mail, or
Bluetooth.
80
Menu functions
•
Delete
: delete the selected file or all files.
•
Rename
: change the file name.
•
List by
: change the sort order of the file list.
•
Bluetooth visibility
: share the selected file or the
files you want with other Bluetooth devices.
•
Print via
: print the file by connecting the phone to
a printer via USB or Bluetooth. Some printers may
not be compatible with the phone.
•
Lock
/
Unlock
: lock the file to protect it from being
deleted, or unlock the file.
•
Details
: access the file properties.
Memory status
(Menu 6.6)
You can check the total amount of memory and the
amount of memory currently in use in each media box.
You can also access a media box by selecting it from
this menu.
Planner
(Menu 7)
Use this menu to keep track of your schedule. You can
also use convenient features, such as an alarm clock,
memo pad, calculator, converter, timer, and
stopwatch.
To access this menu, press <
Menu
> in Idle mode and
select
Planner
.
Alarm
(Menu 7.1)
Use this menu to set alarms. The alert type for a
normal alarm corresponds to the call alert type
settings. A wake-up alarm is not affected by your
sound settings.
Setting an alarm
1. Select the type of alarm.
2. Set each alarm option.
•
Alarm
: activate the alarm.
•
Alarm time
: enter the time for the alarm to
ring.
81
Menu functions
Planner
(Menu 7)
•
AM/PM
: select
AM
or
PM
in 12-hour time
format.
•
Alarm day
: select days of the week to sound
the alarm.
•
Alarm tone
: select an alarm tone.
3. Press <
Save
>.
Stopping an alarm
• For a non-wake-up alarm, press any key.
• For a wake-up alarm, press <
OK
> or [ ].
Press any key, except for <
OK
> and [ ], to
cause it to sound again after 5 minutes. You can do
this a maximum of 5 times.
Deactivating an alarm
1. Select the alarm you want to deactivate.
2. Select
Off
on the
Alarm
line and press <
Save
>.
Setting alarms to sound when the phone is off
From the Alarm screen, select
Auto power-up
→
On
.
If the phone is off when it is time for the alarm to
sound, the phone switches on and sounds the alarm.
Calendar
(Menu 7.2)
Use this menu to keep track of your schedule.
Selecting a day on the calendar
When you access the
Calendar
menu, the calendar in
Month view appears with today’s date indicated by a
blue box.
• Press [Left] or [Right] to move by day.
• Press [Up] or [Down] to move by week.
• Press [Volume] to move by month.
Creating an item
You can store appointments, anniversaries,
miscellaneous items, and tasks on the calendar. More
than one item per day can be stored.
Entering an appointment or a miscellaneous item
1. Select a date on the calendar.
2. Press <
Options
> and select
Create
→
Appointment
or
Miscellany
.
3. Enter information or change the settings:
•
Subject
: enter a title for the item.
82
Menu functions
•
Details
: enter item details.
•
Start date
and
Start time
: enter the starting
date and time for the item.
•
AM/PM
: select
AM
or
PM
in 12-hour time
format.
•
End date
and
End time
: enter the ending date
and time for the item.
•
AM/PM
: select
AM
or
PM
in 12-hour time
format.
•
Location
: (for
Appointment
) enter
information about the appointed location.
•
Alarm
: set an alarm for the item.
•
before
: set how long before the item the alarm
is to alert you.
•
Alarm tone
: select an alarm tone.
•
Repeat
: (for
Appointment
) select to set the
item to recur and select a repeat option.
•
until
: (for
Appointment
) set the ending date,
if the item will recur.
4. Press <
Save
> to save the item.
Entering an anniversary
1. Select a date on the calendar.
2. Press <
Options
> and select
Create
→
Anniversary
.
3. Enter information or change the settings:
•
Occasion
: enter information about the
anniversary.
•
Date
: enter the date.
•
Alarm
: set an alarm for the anniversary.
•
before
: set how long before the anniversary
the alarm is to alert you.
•
Alarm time
: enter the time for the alarm to
ring.
•
AM/PM
: select
AM
or
PM
in 12-hour time
format.
•
Alarm tone
: select an alarm tone.
•
Repeat every year
: set the phone to remind
you of the anniversary every year.
4. Press <
Save
> to save the anniversary.
83
Menu functions
Planner
(Menu 7)
Entering a task
1. Select a date on the calendar.
2. Press <
Options
> and select
Create
→
Task
.
3. Enter information or change the settings:
•
Task
: enter information about the task.
•
Start date
: enter the starting date.
•
Due date
: enter the ending date.
•
Priority
: select a priority level.
•
Alarm
: set an alarm for the task.
•
before
: set how long before the task the alarm
is to alert you.
•
Alarm time
: enter the time for the alarm to
ring.
•
AM/PM
: select
AM
or
PM
in 12-hour time
format.
•
Alarm tone
: select an alarm tone.
4. Press <
Save
> to save the task.
Consulting the calendar
Once you have created items, the item icons and the
number of items for a specific day appears at the
bottom of the calendar.
Viewing an item
1. Select a date on the calendar to display the items
for that day.
2. Select an item to view its details.
3. Press [Left] or [Right] to access the other items
scheduled for the selected day.
While viewing an item, press <
Options
> to access
the following options:
•
Edit
: edit the item.
•
Create
: add a new item.
•
Send via
: send the item via SMS, MMS, e-mail, or
Bluetooth.
•
View by
: change the view mode of the calendar.
• Appointment • Anniversary
• Task • Miscellaneous item
84
Menu functions
•
Done
/
Not done
: change the status of the task
item.
•
Delete
: delete the item.
•
Print via Bluetooth
: print the item details by
connecting the phone to a printer via Bluetooth.
Some printers may not be compatible with the
phone.
Using calendar options
On the calendar, press <
Options
> to access the
following options:
•
View by
: change the view mode of the calendar.
•
Create
: add a new item.
•
Go to
: select today’s date or enter a specific date.
•
Event list
: sort items by type of item.
•
Delete
: delete items stored on the calendar by
using various deleting options.
•
Settings
: change the default settings for the
calendar.
Starting day
: select which day of the week the
calendar starts with.
Default view by
: select the default calendar view
mode.
•
Missed alarm events
: access items whose
alarms you have missed.
•
Memory status
: access memory information for
the items stored on the calendar.
Viewing items in a different mode
You can change the calendar display to Day view or
Week view. Press <
Options
> and select
View by
→
a
view mode.
Day view
You can view items for the selected date. The following
icons may display to indicate the item status:
• Alarm set
• Recurring item
• Completed task
• Task priority (Red: high, Blue: normal, and
Grey: low)
Select an item to view its details.
85
Menu functions
Planner
(Menu 7)
Week view
You can view items for the selected week. A cell on the
timetable indicates the presence of item information.
Select a cell in the day you want.
Memo
(Menu 7.3)
You can create a list of memos.
Creating a memo
1. Press <
Options
> and select
Create
.
2. Enter the memo contents.
3. Press [ ].
Viewing a memo
Select a memo from the list.
While viewing a memo, press <
Options
> to access
the following options:
•
Edit
: edit the selected memo.
•
Send via
: send the memo via Bluetooth, SMS,
MMS, or e-mail.
•
Delete
: delete the selected memo.
•
Print via Bluetooth
: print the memo details by
connecting the phone to a printer via Bluetooth.
Some printers may not be compatible with the
phone.
•
Memory status
: check the number of memos
stored in the phone’s memory.
World time
(Menu 7.4)
Use this menu to find out the current time in another
part of the world.
Setting the local time zone
1. From the world map, press [Left] or [Right] to
scroll to the city you want on the upper line ( ).
As the time line moves, the time and date of the
given zone displays.
2. Press [ ] to save the time zone.
86
Menu functions
Viewing world time
1. From the world map, move to the lower line ( ).
2. Press [Left] or [Right] to scroll to the city you
want.
3. Press [ ] to save the time zone.
Applying daylight saving time
1. From the world map, press <
Options
> and select
Set daylight saving time
.
2. Press [ ] to select the time zones you want.
3. Press <
Save
>.
Calculator
(Menu 7.5)
Use this menu to perform basic arithmetic functions,
such as addition, subtraction, multiplication, and
division.
1. Enter the first number.
• Press [ ] to insert a decimal point.
• Press [ ] to insert a bracket.
• Press [Volume] to move the cursor.
•Press <
Options
> to use additional arithmetic
functions or switch to the Converter screen.
2. Press one of the Navigation keys to access the
math function you want.
3. Enter the second number.
4. Press [ ] to view the result.
5. If necessary, repeat from step 2 to continue the
calculation.
Converter
(Menu 7.6)
Use this menu for common conversions, such as
currency and temperature.
Performing a conversion
1. Select a converter.
2. Press [Left] or [Right] to select the original unit
and press [Down].
3. Enter the value to be converted and press [Down].
•Press
[
]
to insert a decimal point.
•Press
[
]
to change the temperature to above
zero (+) or below zero (-).
87
Menu functions
Planner
(Menu 7)
4. Press [Left] or [Right] to select the unit to which
you want to convert.
The equivalent value for the amount you entered
displays.
Using converter options
Press <
Options
> to access the following options:
•
Clear
: clear the current values.
•
Reverse
: reverse the conversion.
•
Exchange rate
: edit the currency rate list.
Timer
(Menu 7.7)
Use this menu to set a period of time for the phone to
count down. The phone sounds an alarm when the
specified period of time expires.
Starting the timer
1. Press <
Set
>.
2. Enter the length of time you want to count down
and press <
OK
>.
3. Press [ ] to start counting down.
Stopping the timer
• Press any key when the timer rings.
• Press [ ] on the Timer screen to stop the timer
before it rings.
Stopwatch
(Menu 7.8)
Use this menu to measure elapsed time. The
maximum time is 10 hours.
1. Press [ ] to start the stopwatch.
2. Press [ ] to check an interval. You can repeat
this step for a total of 4 intervals.
88
Menu functions
Camera
(Menu 8)
You can use the camera module embedded in your
phone to take photos and record videos.
To access this menu, press <
Menu
> in Idle mode and
select
Camera
, or press
[
Camera
]
.
Take photo
(Menu 8.1)
The camera produces JPEG photos.
Taking a photo with the phone open
1. Access the
Take photo
menu or press and hold
[Camera] to turn on the camera.
2. Make any desired adjustments.
• Press < > to access camera options.
next section
• Use the keypad to change the camera settings
or switch to other modes.
p. 90
3. Press [ ] or
[
Camera
]
to take a photo. The
photo is saved in the
My
photos
folder.
Using camera options in Capture mode
In Capture mode, press < > to access the following
options:
•
Record video
: switch to Record mode.
•
Shooting mode
: take a photo in the following
modes:
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are
not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
When you take a photo in direct sunlight or in bright
conditions, shadows may appear on the photo.
4.
To Press
access photo options <
Options
>.
p. 90
delete the photo [
C
] and then <
Yes
>.
return to Capture mode <
Back
> or [ ].
89
Menu functions
Camera
(Menu 8)
Single shot
: take a photo in Normal mode. You
can select whether or not the camera automatically
saves a photo.
Multi shot
: take a series of action stills. You can
select the number of photos the camera will take.
Mosaic shot
: take several stills and save them in
one frame. You can select the layout.
•
Effects
: change the colour tone or apply a special
effect.
•
Frames
: apply a decorative frame.
•
Timer
: set a time delay before the camera takes a
photo.
•
Go to My photos
: access the
My
photos
folder.
•
Camera settings
: change the default settings for
taking photos.
Photo settings
: change the following image
settings:
-
Size
: select an image size.
-
Quality
: select an image quality.
-
Viewfinder
mode
: select a preview screen.
-
Scene program
: set whether or not to use Night
shot mode.
-
Exposure metering
: select a method to
determine the exposure of an image, based on a
specific area of the image.
-
White balance
: adjust the colour balance of the
photo. You can make your photo appear warmer
or cooler.
-
ISO
: change the ISO setting, which controls the
sensitivity of your camera. For low light
situations, select a higher ISO number. The
higher the ISO number, the faster the camera
shutter functions and the more sensitive the
camera is to light. Higher ISO settings may bring
some distortion to an image.
Preferences
: change the following camera
settings:
-
Shutter sound
: select the sound that you hear
when you press the shutter.
-
Zoom sound
: turn the sound effect for zooming
on or off.
90
Menu functions
-
Brightness sound
: turn the sound effect for
brightness adjustment on or off.
-
Default name
: change the default prefix of file
names.
•
Camera shortcuts
: view the functions of the keys
you can use in Capture mode.
Using the keypad in Capture mode
You can use the keypad to customise your camera
settings in Capture mode.
Using photo options
After saving a photo, press <
Options
> to access the
following options:
•
Viewfinder
: return to Capture mode.
•
View
: access one of the multi-shot photos.
•
Send via
: send the file via MMS, e-mail, or
Bluetooth.
Key Function
Left/Right Adjusts the brightness.
Up/Down Zooms in or out.
Volume up Flips the image vertically.
Volume down Shows the mirror image.
1
Switches to Record mode.
p. 91
2
Changes the image size.
3
Changes the image quality.
4
Changes the shooting mode.
5
Changes the colour tone or applies a
special effect.
6
Changes the white balance setting.
7
Selects a decorative frame.
8
Sets the timer.
9
Changes the ISO setting.
0
Goes to the
My photos
folder.
Changes the preview screen.
Key Function
91
Menu functions
Camera
(Menu 8)
•
Set as
: set the photo as your wallpaper for the
displays or as a caller ID image for a Phonebook
entry.
•
Edit
: edit the image using the Image editor.
p. 43
•
Delete
: delete the file.
•
Multi shot delete all
: delete the multi-shot
photos you want.
•
Rename
: change the file name.
•
Go to My photos
: access the
My photos
folder.
p. 77
•
Bluetooth visibility
: share the currently selected
file or the files you want with other Bluetooth
devices.
•
Print via
: print the image by connecting the
phone to a printer via USB or Bluetooth. Some
printers may not be compatible with the phone.
•
Lock
/
Unlock
: lock the file to protect it from being
deleted, or unlock the file.
•
Details
: access the file properties.
Taking a photo with the phone closed
1. Press and hold [Camera]. The icon displays.
2. If necessary, press [Volume up] to switch to
Capture mode.
3. Make any desired adjustments.
• Press [Volume up] to switch to Record mode.
• Press [Volume down] to show the mirror
image.
4. Press [Camera] to take a photo. The photo is
automatically saved.
Record video
(Menu 8.2)
You can record a video of what is displayed on the
camera screen and save it.
Recording a video with the phone open
1. Access the
Record video
menu.
2. Make any desired adjustments.
• Press < > to access camera options.
next section
92
Menu functions
• Use the keypad to change the camera settings
or switch to other modes.
p. 93
3. Press [ ]
or [
Camera
]
to start recording.
4. Press [ ]
,
<>, or
[
Camera
]
to stop recording.
The video is automatically saved in the
My video
clips
folder.
Using camera options in Record mode
In Record mode, press < > to access the following
options:
•
Take photo
: switch to Capture mode.
•
Effects
: change the colour tone or apply a special
effect.
•
Timer
: set a time delay before the camera starts
recording a video.
•
Go to My video clips
: access the
My video clips
folder.
•
Camcorder settings
: change the following
settings for recording videos:
Recording mode
: select a video recording mode.
Select
Normal
to record a video within the limit of
the currently available memory. The video clip is
saved in MP4 format.
Select
Limit for multimedia messages
or
Limit
for emails
to record a video suitable for an MMS
message or e-mail. The video clip is saved in 3GP
format.
Size
: select a frame size.
Quality
: select an image quality.
Record audio
: record audio with a video clip.
White balance
: adjust the colour balance of the
video. You can make your video appear warmer or
cooler.
5.
To Press
play back the video clip [ ].
access video options < >.
p. 93
delete the video [
C
] and then <
Yes
>.
return to Record mode < >.
93
Menu functions
Camera
(Menu 8)
Zoom sound
: turn the sound effect for zooming
on or off.
Brightness sound
: turn the sound effect for
brightness adjustment on or off.
Default name
: change the default prefix of file
names.
•
Camcorder shortcuts
: view the functions of the
keys you can use in Record mode.
Using the keypad in Record mode
You can use the keypad to customise your camera
settings in Record mode:
Using video options
After saving a video clip, press < > to access the
following options:
•
Viewfinder
: return Record mode.
•
Send via
: send the file via MMS, e-mail, or
Bluetooth.
•
Delete
: delete the file.
•
Rename
: change the file name.
Key Function
Left/Right Adjusts the brightness.
Up/Down Zooms in or out.
Volume up Flips the image vertically.
Volume down Shows the mirror image.
1
Switches to Capture mode.
p. 88
2
Changes the frame size.
3
Changes the image quality.
4
Changes the video recording mode.
5
Changes the colour tone or applies a
special effect.
6
Changes the white balance setting.
7
Mutes or unmutes the audio.
8
Sets the timer.
0
Goes to the
My video clips
folder.
Key Function
94
Menu functions
•
Go to My video clips
: access the
My video clips
folder.
p. 78
•
Bluetooth visibility
: share the file with other
Bluetooth devices.
•
Lock
/
Unlock
: lock the file to protect it from being
deleted, or unlock the file.
•
Details
: access the file properties.
Recording a video with the phone closed
1. Press and hold [Camera]. The icon displays.
2. If necessary, press [Volume up] to switch to
Record mode.
3. Make any desired adjustments.
• Press [Volume up] to switch to Capture mode.
• Press [Volume down] to show the mirror
image.
4. Press [Camera] to record a video.
5. Press [Camera] to stop recording. The video clip is
automatically saved.
Go to My photos
(Menu 8.3)
Use this menu to access a list of photos you have
taken.
p. 77
Go to My video clips
(Menu 8.4)
Use this menu to access a list of videos you have
recorded.
p. 78
95
Menu functions
Settings
(Menu 9)
Settings
(Menu 9)
The
Settings
menu provides you with various setting
options to customise the phone to your preferences
and needs. You can also reset the settings to their
default values.
To access this menu, press <
Menu
> in Idle mode and
select
Settings
.
Time and date
(Menu 9.1)
Use this menu to set the current time and date on
your phone.
•
Time
: enter the current time.
•
Home zone
: set the home time zone. Select the
city that corresponds to your home zone. To set
the daylight saving time, select
Set daylight
saving time
.
•
AM/PM
: select
AM
or
PM
in 12-hour time format.
•
Time format
: select a time format.
•
Date
: enter the current date.
•
Date format
: select a date format.
Phone settings
(Menu 9.2)
Many different features of your phone’s system can be
customised to suit your preferences.
Language
(Menu 9.2.1)
Use this menu to select a language for the display
text.
Greeting message
(Menu 9.2.2)
Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
Shortcuts
(Menu 9.2.3)
You can use the Navigation keys as shortcuts to access
specific menus directly from Idle mode. Use this menu
to change the shortcut assignments for [Left], [Right],
and [Down].
Assigning a shortcut menu
1. Select a key to be used as a shortcut key.
2. Select a menu to be assigned to the key.
96
Menu functions
Using shortcut options
Press <
Options
> to access the following options:
•
Change
: assign or change a shortcut menu
assignment.
•
Remove
: deactivate the shortcut assignment to
the selected key.
•
Remove all
: deactivate all shortcut assignments.
My menu
(Menu 9.2.4)
You can set up a menu of your own using your
favourite menu items, which can be easily accessed by
pressing [Up] in Idle mode.
Setting up My menu item
1. Select an item to be changed.
2. Select the menu item you want.
Using item options
Press
<
Options
> to access the following options:
•
Assign
: assign an item.
•
Change
: change the selected item.
•
Remove
: remove the selected item.
•
Remove all
: remove all items.
Advanced shortcuts
(Menu 9.2.5)
Use this menu to activate the Advanced shortcut
feature, which allows you to access the text message,
alarm, calendar, and converter applications from the
dialling screen.
Launching menus by number
1. From the Advanced screen, select
On
and press
<
Save
>.
1. In Idle mode, enter the number for the action you
want.
For example
,
enter time as 4-digit to set an alarm
or date as 4-digits to enter your schedule.
2. Press one of the Navigation keys.
You can access the following applications by
default:
•Up: Alarm
p. 80
•Down: Converter
p. 86
•Left: SMS
p. 59
• Right: Calendar
p. 81
97
Menu functions
Settings
(Menu 9)
Changing an Advanced shortcut key
1. Press [Down] and select a key to be used as a
shortcut key.
2. Select a menu to be assigned to the key.
Using Advanced shortcut options
Press <
Options
> to access the following options:
•
Change
: assign or change a shortcut menu.
•
Remove
: deactivate the shortcut assignment to
the selected key.
•
Remove all
: deactivate all shortcut assignments.
Volume key
(Menu 9.2.6)
Use this menu to change the volume key settings.
•
Volume key function
: set whether the phone
mutes the call ringer or rejects a call if you press
and hold [Volume] when a call comes in. You can
also set whether the phone sends an SMS message
to the caller when a call is rejected.
•
Text message
: enter a message to be sent to the
caller when a call is rejected.
Voice command settings
(Menu 9.2.7)
Use this menu to activate or deactivate voice
recognition.
When voice recognition is deactivated, you cannot
initiate the feature by accessing the
Voice
commands
menu. Pressing [
C
] allows you to activate
and launch voice recognition.
Extra settings
(Menu 9.2.8)
You can turn the automatic redialling or answering
features on or off.
•
Auto redial
: set the phone to make up to ten
attempts to redial a phone number after an
unsuccessful call.
•
Anykey
answer
: answer an incoming call by
pressing any key, except for <
Reject
> and [ ].
•
Voice clarity
: remove extraneous noise and
increase call quality so that the person with whom
you are speaking can hear you clearly even if you
are in a noisy place.
•
Active flip
: answer an incoming call by opening
the phone.
98
Menu functions
Offline mode
(Menu 9.2.9)
Use this menu to switch the phone to Offline mode or
back to Online mode.
Display settings
(Menu 9.3)
Use this menu to change settings for the display.
Wallpaper
(Menu 9.3.1)
You can change the background image that is
displayed on each display.
•
Main display
: access the following options for the
main display.
Main display
: select a background image in Idle
mode.
Menu background
: set whether or not to display
the same background image in Menu mode.
Transparency
: adjust the transparency of the
menu background image.
•
Cover display
: select an image or text to be
displayed on the external display.
Clock
: select a clock type.
Cover title
: enter the text you want.
Wallpaper images
: select an image.
Text display
(Menu 9.3.2)
You can change the display settings for the text
displayed on the idle screen.
•
Text position
: select a position. If you do not
want text to display in Idle mode, select
Off
.
•
Text style
: select a font style.
•
Text colour
: select a font colour.
Skin
(Menu 9.3.3)
You can select a skin colour pattern for Menu mode.
Brightness
(Menu 9.3.4)
You can adjust the brightness of the display for
varying lighting conditions.
99
Menu functions
Settings
(Menu 9)
Dialling display
(Menu 9.3.5)
Use this menu to select a font size and colour for the
numbers entered and the background colour of the
display while dialling.
Calendar
(Menu 9.3.6)
Use this menu to display the calendar of the current
month on the idle screen.
Show caller ID
(Menu 9.3.7)
Use this menu to set the phone to display missed call
notifications with the most recently missed caller’s
information. To set the external display to show caller
information, select
Also on cover display
.
Show cover indicators
(Menu 9.3.8)
Use this menu to set whether or not the icons are
shown on the external display after the display turns
off.
Sound settings
(Menu 9.4)
Use this menu to customise various sound settings.
Incoming call
(Menu 9.4.1)
Use this menu to select a volume level and alert type
for incoming calls.
•
Alert type
: specify how you are to be informed of
incoming calls.
•
Ring tone
: select a ringtone for the call ringer.
•
Volume
: select a ringtone volume.
Keypad tone
(Menu 9.4.2)
Use this menu to select the tone that the phone
sounds when you press a key.
You can adjust the key tone volume using [Volume]
in Idle mode. When you set the key tone volume to
0
, the
Indicative tone
and
Flip tone
features are
deactivated.
100
Menu functions
Message tone
(Menu 9.4.3)
Use this menu to set up the ringtone for incoming
messages and e-mails.
•
Tone
: select one of the several message tones.
•
Alert type
: specify how you are informed when a
message comes in.
•
Repetition
: specify how often the phone informs
you of a new message.
Power-on/off tone
(Menu 9.4.4)
Use this menu to select the melody that the phone
sounds when it is switched on or off.
Flip tone
(Menu 9.4.5)
Use this menu to select the tone that the phone
sounds when you open or close the phone.
Silent mode
(Menu 9.4.6)
Use this menu to set how the phone acts to alert you
to a specific event in Silent mode.
Extra tones
(Menu 9.4.7)
Use this menu to customise additional tones for the
phone.
•
Minute
minder
: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
•
Connection
tone
: set the phone to beep when an
outgoing call is connected to the system.
•
Alerts on call
: set the phone to beep when you
receive a new message or when the time for an
alarm comes during a call.
•
Indicative
tone
: set the phone to beep when a
pop-up window displays.
Light settings
(Menu 9.5)
Use this menu to change settings for light.
Backlight
(Menu 9.5.1)
You can change the settings for the backlight or
display stays on.
•
Main display on
: select the length of time the
backlight stays on.
101
Menu functions
Settings
(Menu 9)
•
Main display dim
: select the length of time the
display stays on in Dim mode after the backlight
turns off. After a specified time, the display turns
off.
Keypad light
(Menu 9.5.2)
Use this menu to set how the phone controls the use
of the keypad light.
•
Any time
: the keypad light is always used.
•
Night time
: the keypad light is used only between
5:00 PM and 9:00 AM.
•
Custom time
: you can specify the time period
that the keypad light is used.
Network services
(Menu 9.6)
Use this menu to access network services. Please
contact your service provider to check their availability
and subscribe to them, if you wish.
Call diverting
(Menu 9.6.1)
This network service reroutes incoming calls to a
phone number that you specify.
1. Select a call diverting option:
•
Divert always
: divert calls.
•
Busy
: divert calls when you are on another
call.
•
No
reply
: divert calls when you do not answer
the phone.
•
Unreachable
: divert calls when you are not in
your service area or when your phone is
switched off.
•
Cancel
all
: cancel all call diverting options.
2. Select the type of calls to be diverted.
3. Select
Activate
. To deactivate call diverting, select
Deactivate
.
4. Move to the
Divert to
line.
5. Enter the number to which calls are to be diverted
and press <
OK
>.
6. If you selected
No reply
, move to the
Sec
line and
select the length of time the network delays before
diverting a call.
102
Menu functions
Call barring
(Menu 9.6.2)
This network service allows you to restrict your calls.
1. Select a call barring option:
•
All
outgoing
: prohibit outgoing calls.
•
International
: prohibit international calls.
•
International
except
home
: only allow calls
to numbers within the current country when
you are abroad, and to your home country.
•
All
incoming
: prohibit incoming calls.
•
Incoming
while
abroad
: prohibit incoming
calls when you use your phone outside of your
home service area.
•
Cancel
all
: cancel all call barring settings,
allowing to be sent and received normally.
•
Change barring password
: change the call
barring password obtained from your service
provider.
2. Select the type of calls to be barred.
3. Select
Activate
. To deactivate call barring, select
Deactivate
.
4. Enter the call barring password supplied by your
service provider and press <
Select
>.
Call waiting
(Menu 9.6.3)
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which the call waiting
option will apply.
2. Select
Activate
. To deactivate call waiting, select
Deactivate
.
Network selection
(Menu 9.6.4)
This network service allows you to manually select the
network to be used while roaming outside of your
home area, or to let the network be chosen
automatically.
You can select a network other than your home
network only if there is a valid roaming agreement
between the two.
103
Caller ID
(Menu 9.6.5)
This network service allows you to hide your phone
number from the person you are calling. However,
some networks do not allow the user to change this
setting. If you select
Default
, the phone will use the
default setting provided by the network.
Voice mail server
(Menu 9.6.6)
Use this menu to store the number of the voicemail
server and access your voicemails.
•
Connect to voice server
: connect to the
voicemail server to allow you to listen to your
messages.
•
Voice server number
: enter the voicemail server
number.
Band selection
(Menu 9.6.7)
For the phone to make and receive phone calls, it
must register with an available network.
Your phone can handle any of the following types of
networks: Combined GSM 900/1800, GSM 1900, and
GSM 900/1800/1900.
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you must remember to change to an
appropriate band.
Security
(Menu 9.7)
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
You must store the voicemail server number before
accessing the server. Your service provider can give
you the number.
If you enter an incorrect PIN/PIN2 three times, the
SIM card is blocked. To unblock it, you need to enter
your PUK/PUK2 (Personal Unblocking Key). The
codes are supplied by your network operator.
104
Menu functions
PIN check
(Menu 9.7.1)
The 4- to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
Change PIN
(Menu 9.7.2)
Use this menu to change your PIN. The PIN check
feature must be enabled to use this feature.
Phone lock
(Menu 9.7.3)
The Phone lock feature locks the phone from
unauthorised use.
When this feature is enabled, you must enter a 4- to
8-digit phone password each time the phone is
switched on.
The password is preset to
00000000
. To change the
password, use the
Change password
menu.
Change password
(Menu 9.7.4)
Use this menu to change your phone password.
Privacy
(Menu 9.7.5)
Use this menu to lock access to call logs, Phonebook
entries, messages, files, or all menu functions on the
phone, except for call functions. When a privacy
options enabled, you must enter the phone password
to access the locked items or functions.
SIM lock
(Menu 9.7.6)
The SIM lock feature allows your phone to work only
with the current SIM by assigning a SIM lock code. You
must enter the SIM lock code to use a different SIM
card.
FDN mode
(Menu 9.7.7)
If supported by your SIM card, Fixed Dialling Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored on
the SIM card.
Change PIN2
(Menu 9.7.8)
If supported by your SIM card, the Change PIN2
feature changes your current PIN2.
105
Memory status
(Menu 9.8)
Use this menu to check the amount of memory being
used for storing data in Messages, My files, Calendar,
Phonebook, JAVA world, Memo, and Face images. You
can also view the amount of shared memory.
Reset settings
(Menu 9.9)
Use this menu to reset the phone’s settings you have
changed.
1. Press [ ] to select the setting categories to be
reset.
2. Press <
Reset
>.
3. Press <
Yes
> to confirm the reset.
4. Enter the phone password and press <
OK
>.
Solve problems
Help and personal needs
To save the time and expense of an unnecessary
service call, perform the simple checks in this section
before contacting a service professional.
When you switch on your phone, the following
messages may appear:
“Insert SIM”
• Be sure that the SIM card is correctly installed.
“Phone lock”
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
“Enter PIN”
• You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the
PIN check
menu.
The password is preset to
00000000
. You can
change this password.
p. 104
106
Solve problems
“Enter PUK”
• The PIN code has been entered incorrectly three
times, and the SIM card is now blocked. Enter the
PUK supplied by your service provider.
“No network,” “Network unavailable,” or “Not
done” displays
• The network connection has been lost. You may be
in a weak signal area. Move and try again.
• You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
You have entered a number but it was not dialled
• Be sure that you have pressed [ ].
• Be sure that you have accessed the right cellular
network.
• Be sure that you have not set an outgoing call
barring option.
Your correspondent cannot reach you
• Be sure that your phone is switched on. ([ ]
pressed for more than one second.)
• Be sure that you are accessing the correct cellular
network.
• Be sure that you have not set an incoming call
barring option.
Your correspondent cannot hear you speaking
• Be sure that you have switched off the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is located
at the bottom of the phone.
The phone starts beeping and “Battery low”
flashes on the display
• Your battery is insufficiently charged. Recharge the
battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display
( ). The number of bars indicates the signal
strength from strong ( ) to weak ( ).
• Try moving the phone slightly or moving closer to a
window if you are in a building.
107
No number is dialled when you re-call a
Phonebook entry
•Use the
Contact list
menu to ensure the number
has been stored correctly.
• Re-store the number, if necessary.
The battery does not charge properly or the
phone sometimes turns itself off
• Wipe the charging contacts both on the phone and
on the battery with a clean soft cloth.
If the above guidelines do not help you to solve
the problem, take note of:
• The model and serial numbers of your phone
•Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
108
Health and safety information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
exposure limits for radio frequency (RF) energy set by
the Federal Communications Commission (FCC) of the
U.S. government. These FCC exposure limits are
derived from the recommendations of two expert
organizations, the National Counsel on Radiation
Protection and Measurement (NCRP) and the Institute
of Electrical and Electronics Engineers (IEEE). In both
cases, the recommendations were developed by
scientific and engineering experts drawn from
industry, government, and academia after extensive
reviews of the scientific literature related to the
biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile
phones employs a unit of measurement known as the
Specific Absorption Rate (SAR). The SAR is a measure
of the rate of absorption of RF energy by the human
body expressed in units of watts per kilogram (W/kg).
The FCC requires wireless phones to comply with a
safety limit of 1.6 watts per kilogram (1.6 W/kg). The
FCC exposure limit incorporates a substantial margin
of safety to give additional protection to the public and
to account for any variations in measurements.
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power levels
so as to use only the power required to reach the
network. In general, the closer you are to a wireless
base station antenna, the lower the power output.
NorthAmerica_Cingular_T-mobile.fm Page 101 Tuesday, May 16, 2006 7:52 AM
109
Health and safety information
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that
it does not exceed the exposure limit established by
the FCC. Tests for each model phone are performed in
positions and locations (e.g. at the ear and worn on
the body) as required by the FCC.
The highest SAR values for this model phone as
reported to the FCC are: GSM1900 Head:0.855 W/Kg,
Body-worn: 0.116 W/Kg.
For body worn operation, this model phone has been
tested and meets the FCC RF exposure guidelines
whenused with a Samsung accessory designated for
this product or when used with an accessory that
contains no metal and that positions the handset a
minimum of 1.5 cm from the body.
Non-compliance with the above restrictions may result
in violation of FCC RF exposure guidelines.
SAR information on this and other model phones can
be viewed on-line at www.fcc.gov/oet/fccid. This site
uses the phone FCC ID number, A3LSGHE500.
Sometimes it may be necessary to remove the battery
pack to find the number. Once you have the FCC ID
number for a particular phone, follow the instructions
on the website and it should provide values for typical
or maximum SAR for a particular phone. Additional
product specific SAR information can also be obtained
at www.fcc.gov/cgb/sar.
NorthAmerica_Cingular_T-mobile.fm Page 102 Tuesday, May 16, 2006 7:52 AM
Health and safety information
110
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
from wireless phones. The FDA publication includes
the following information:
What kinds of phones are the subject of this
update?
The term wireless phone refers here to hand-held
wireless phones with built-in antennas, often called
“cell,” “mobile,” or “PCS” phones. These types of
wireless phones can expose the user to measurable
radio frequency energy (RF) because of the short
distance between the phone and the user's head.
These RF exposures are limited by Federal
Communications Commission safety guidelines that
were developed with the advice of FDA and other
federal health and safety agencies. When the phone is
located at greater distances from the user, the
exposure to RF is drastically lower because a person's
RF exposure decreases rapidly with increasing
distance from the source. The so-called “cordless
phones,” which have a base unit connected to the
telephone wiring in a house, typically operate at far
lower power levels, and thus produce RF exposures
well within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that
any health problems are associated with using
wireless phones. There is no proof, however, that
wireless phones are absolutely safe. Wireless phones
emit low levels of radio frequency energy (RF) in the
microwave range while being used. They also emit
very low levels of RF when in the stand-by mode.
Whereas high levels of RF can produce health effects
(by heating tissue), exposure to low level RF that does
not produce heating effects causes no known adverse
health effects. Many studies of low level RF exposures
have not found any biological effects. Some studies
have suggested that some biological effects may
occur, but such findings have not been confirmed by
additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
NorthAmerica_Cingular_T-mobile.fm Page 103 Tuesday, May 16, 2006 7:52 AM
111
Health and safety information
What is FDA's role concerning the safety of
wireless phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new
drugs or medical devices. However, the agency has
authority to take action if wireless phones are shown
to emit radio frequency energy (RF) at a level that is
hazardous to the user. In such a case, FDA could
require the manufacturers of wireless phones to notify
users of the health hazard and to repair, replace or
recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
• “Support needed research into possible biological
effects of RF of the type emitted by wireless
phones;
• “Design wireless phones in a way that minimizes
any RF exposure to the user that is not necessary
for device function; and
• “Cooperate in providing users of wireless phones
with the best possible information on possible
effects of wireless phone use on human health.
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at
the federal level. The following agencies belong to this
working group:
• “National Institute for Occupational Safety and
Health
• “Environmental Protection Agency
• “Federal Communications Commission
• “Occupational Safety and Health Administration
• “National Telecommunications and Information
Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF
NorthAmerica_Cingular_T-mobile.fm Page 104 Tuesday, May 16, 2006 7:52 AM
Health and safety information
112
exposure. FCC relies on FDA and other health agencies
for safety questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from
these base stations are typically thousands of times
lower than those they can get from wireless phones.
Base stations are thus not the primary subject of the
safety questions discussed in this document.
What are the results of the research done
already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radio frequency energy
(RF) exposures characteristic of wireless phones have
yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies,
however, have suggested that low levels of RF could
accelerate the development of cancer in laboratory
animals. However, many of the studies that showed
increased tumor development used animals that had
been genetically engineered or treated with cancer-
causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies
exposed the animals to RF for up to 22 hours per day.
These conditions are not similar to the conditions
under which people use wireless phones, so we don't
know with certainty what the results of such studies
mean for human health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use
of wireless phones and primary brain cancer, glioma,
meningioma, or acoustic neuroma, tumors of the brain
or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
However, none of the studies can answer questions
about long-term exposures, since the average period
of phone use in these studies was around three years.
NorthAmerica_Cingular_T-mobile.fm Page 105 Tuesday, May 16, 2006 7:52 AM
113
Health and safety information
What research is needed to decide whether RF
exposure from wireless phones poses a health
risk?
A combination of laboratory studies and
epidemiological studies of people actually using
wireless phones would provide some of the data that
are needed. Lifetime animal exposure studies could be
completed in a few years. However, very large
numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one
exists. Epidemiological studies can provide data that is
directly applicable to human populations, but ten or
more years' follow-up may be needed to provide
answers about some health effects, such as cancer.
This is because the interval between the time of
exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many
years. The interpretation of epidemiological studies is
hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones.
Many factors affect this measurement, such as the
angle at which the phone is held, or which model of
phone is used.
What is FDA doing to find out more about the
possible health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields
(EMF) Project since its inception in 1996. An influential
result of this work has been the development of a
detailed agenda of research needs that has driven the
establishment of new research programs around the
world. The Project has also helped develop a series of
public information documents on EMF issues.
FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative
Research and Development Agreement (CRADA) to do
research on wireless phone safety. FDA provides the
scientific oversight, obtaining input from experts in
government, industry, and academic organizations.
CTIA-funded research is conducted through contracts
NorthAmerica_Cingular_T-mobile.fm Page 106 Tuesday, May 16, 2006 7:52 AM
Health and safety information
114
to independent investigators. The initial research will
include both laboratory studies and studies of wireless
phone users. The CRADA will also include a broad
assessment of additional research needs in the
context of the latest research developments around
the world.
What steps can I take to reduce my exposure
to radio frequency energy from my wireless
phone?
If there is a risk from these products - and at this
point we do not know that there is - it is probably very
small. But if you are concerned about avoiding even
potential risks, you can take a few simple steps to
minimize your exposure to radio frequency energy
(RF). Since time is a key factor in how much exposure
a person receives, reducing the amount of time spent
using a wireless phone will reduce RF exposure.
• “If you must conduct extended conversations by
wireless phone every day, you could place more
distance between your body and the source of the
RF, since the exposure level drops off dramatically
with distance. For example, you could use a
headset and carry the wireless phone away from
your body or use a wireless phone connected to a
remote antenna.
Again, the scientific data do not demonstrate that
wireless phones are harmful. But if you are concerned
about the RF exposure from these products, you can
use measures like those described above to reduce
your RF exposure from wireless phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to
users of wireless phones, including children and
teenagers. If you want to take steps to lower exposure
to radio frequency energy (RF), the measures
described above would apply to children and
teenagers using wireless phones. Reducing the time of
wireless phone use and increasing the distance
between the user and the RF source will reduce RF
exposure.
Some groups sponsored by other national
governments have advised that children be
discouraged from using wireless phones at all. For
NorthAmerica_Cingular_T-mobile.fm Page 107 Tuesday, May 16, 2006 7:52 AM
115
Health and safety information
example, the government in the United Kingdom
distributed leaflets containing such a recommendation
in December 2000. They noted that no evidence exists
that using a wireless phone causes brain tumors or
other ill effects. Their recommendation to limit
wireless phone use by children was strictly
precautionary; it was not based on scientific evidence
that any health hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free
kits can be used with wireless phones for convenience
and comfort. These systems reduce the absorption of
RF energy in the head because the phone, which is the
source of the RF emissions, will not be placed against
the head. On the other hand, if the phone is mounted
against the waist or other part of the body during use,
then that part of the body will absorb more RF energy.
Wireless phones marketed in the U.S. are required to
meet safety requirements regardless of whether they
are used against the head or against the body. Either
configuration should result in compliance with the
safety limit.
Do wireless phone accessories that claim to
shield the head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that accessories that claim to shield the head
from those emissions reduce risks. Some products
that claim to shield the user from RF absorption use
special phone cases, while others involve nothing
more than a metallic accessory attached to the phone.
Studies have shown that these products generally do
not work as advertised. Unlike “hand-free” kits, these
so-called “shields” may interfere with proper operation
of the phone. The phone may be forced to boost its
power to compensate, leading to an increase in RF
absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold
devices that claimed to protect wireless phone users
from radiation with making false and unsubstantiated
NorthAmerica_Cingular_T-mobile.fm Page 108 Tuesday, May 16, 2006 7:52 AM
Health and safety information
116
claims. According to FTC, these defendants lacked a
reasonable basis to substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted
cardiac pacemakers and defibrillators from wireless
telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of
Medical instrumentation (AAMI). The final draft, a joint
effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This
standard will allow manufacturers to ensure that
cardiac pacemakers and defibrillators are safe from
wireless phone EMI. FDA has tested wireless phones
and helped develop a voluntary standard sponsored by
the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and
performance requirements for hearing aids and
wireless phones so that no interference occurs when a
person uses a compatible phone and a compatible
hearing aid at the same time. This standard was
approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones
for possible interactions with other medical devices.
Should harmful interference be found to occur, FDA
will conduct testing to assess the interference and
work to resolve the problem.
Additional information on the safety of RF exposures
from various sources can be obtained from the
following organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's
(OSHA):
http://www.osha.gov/SLTC/
radiofrequencyradiation/index.html
NorthAmerica_Cingular_T-mobile.fm Page 109 Tuesday, May 16, 2006 7:52 AM
117
Health and safety information
• National institute for Occupational Safety and
Health (NIOSH):
http://www.cdc.gov/niosh/emfpg.html
• World health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing
Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.nrpb.org.uk
• Updated 4/3/2002: US food and Drug
Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime.
But an important responsibility accompanies the
benefits of wireless phones, one that every user must
uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features,
such as speed dial and redial. If available, these
features help you to place your call without taking
your attention off the road.
2. When available, use a hands-free device. If
possible, add an additional layer of convenience
and safety to your wireless phone with one of the
many hands free accessories available today.
NorthAmerica_Cingular_T-mobile.fm Page 110 Tuesday, May 16, 2006 7:52 AM
Health and safety information
118
3. Position your wireless phone within easy reach. Be
able to access your wireless phone without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your
voice mail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain,
sleet, snow, ice and even heavy traffic can be
hazardous.
5. Do not take notes or look up phone numbers while
driving. Jotting down a “to do” list or flipping
through your address book takes attention away
from your primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car
will be stationary. If you need to make a call while
moving, dial only a few numbers, check the road
and your mirrors, then continue.
7. Do not engage in stressful or emotional
conversations that may be distracting. Make
people you are talking with aware you are driving
and suspend conversations that have the potential
to divert your attention from the road.
8. Use your wireless phone to call for help. Dial 9-1-1
or other local emergency number in the case of
fire, traffic accident or medical emergencies.
Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. If you see an auto accident, crime in
progress or other serious emergency where lives
are in danger, call 9-1-1 or other local emergency
number, as you would want others to do for you.
10. Call roadside assistance or a special non-
emergency wireless assistance number when
necessary. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal, a
minor traffic accident where no one appears
injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-
emergency number.
NorthAmerica_Cingular_T-mobile.fm Page 111 Tuesday, May 16, 2006 7:52 AM
119
Health and safety information
“The wireless industry reminds you to use your
phone safely when driving.”
For more information, please call 1-888-901-SAFE, or
visit our web-site www.wow-com.com
Provided by the Cellular Telecommunications &
Internet Association
Operating Environment
Remember to follow any special regulations in force in
any area and always switch your phone off whenever it
is forbidden to use it, or when it may cause
interference or danger. When connecting the phone or
any accessory to another device, read its user's guide
for detailed safety instructions. Do not connect
incompatible products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation of
the equipment and for the safety of personnel, it is
recommended that the equipment should only be used
in the normal operating position (held to your ear with
the antenna pointing over your shoulder).
Using Your Phone Near Other Electronic
Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against the
RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be maintained
between a wireless phone and a pacemaker to avoid
potential interference with the pacemaker.
These recommendations are consistent with the
independent research and recommendations of
Wireless Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone is
switched on.
• should not carry the phone in a breast pocket.
NorthAmerica_Cingular_T-mobile.fm Page 112 Tuesday, May 16, 2006 7:52 AM
Health and safety information
120
• should use the ear opposite the pacemaker to
minimize potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you
may wish to consult your hearing aid manufacturer to
discuss alternatives.
Other Medical Devices
If you use any other personal medical devices, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information. Switch your phone off in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to
external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted
notices require you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
NorthAmerica_Cingular_T-mobile.fm Page 113 Tuesday, May 16, 2006 7:52 AM
121
areas), chemical plants or where blasting operations
are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas (such
as propane or butane), areas where the air contains
chemicals or particles, such as grain, dust or metal
powders, and any other area where you would
normally be advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well as
user programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should
never rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not be
possible on all wireless phone networks or when
certain network services and/or phone features are in
use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 911 or other official
emergency number). Emergency numbers vary by
location.
3. Press .
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular service
provider.
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut
off the call until given permission to do so.
NorthAmerica_Cingular_T-mobile.fm Page 114 Tuesday, May 16, 2006 7:52 AM
Health and safety information
122
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed
to play with it because they could hurt themselves and
others, damage the phone or make calls that increase
your phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used
in close proximity to receiving equipment. The FCC
• This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
• This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment
and receiver.
-Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV
technician for help.
NorthAmerica_Cingular_T-mobile.fm Page 115 Tuesday, May 16, 2006 7:52 AM
123
can require you to stop using the phone if such
interference cannot be eliminated.
Vehicles using liquefied petroleum gas (such as
propane or butane) must comply with the National Fire
Protection Standard (NFPA-58). For a copy of this
standard, contact the National Fire Protection
Association, One Battery march Park, Quincy, MA
02269, Attn: Publication Sales Division.
Cautions
Changes or modifications made in the radio phone, not
expressly approved by Samsung, will void the user’s
authority to operate the equipment.
Only use approved batteries, antennas and chargers.
The use of any unauthorized accessories may be
dangerous and void the phone warranty if said
accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex
piece of equipment and can be broken. Avoid
dropping, hitting, bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty installation
or service may be dangerous and may invalidate
any warranty applicable to the device.
• Check regularly that all wireless phone equipment
in your vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
• Switch your phone off before boarding an aircraft.
The use of wireless phone in aircraft is illegal and
may be dangerous to the aircraft's operation.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
NorthAmerica_Cingular_T-mobile.fm Page 116 Tuesday, May 16, 2006 7:52 AM
Health and safety information
124
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends
on the signal strength in your area. Your phone
informs you of the current signal strength by
displaying a number of bars next to the signal strength
icon. The more bars displayed, the stronger the signal.
If you're inside a building, being near a window may
give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15
minutes of searching, a Power Save feature is
automatically activated. If your phone is active, it
periodically rechecks service availability or you can
check it yourself by pressing any key.
Anytime the Power Save feature is activated, a
message displays on the screen. When a signal is
found, your phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and
receiver. When it's turned on, it receives and transmits
radio frequency (RF) signals. When you use your
phone, the system handling your call controls the
power level. This power can range from 0.006 watts to
0.2 watts in digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and accessories.
Faulty service may void the warranty.
There are several simple guidelines to operating your
phone properly and maintaining safe, satisfactory
service.
• Hold the phone with the antenna raised, fully-
extended and over your shoulder.
• Try not to hold, bend or twist the phone's antenna.
• Don't use the phone if the antenna is damaged.
• Speak directly into the phone's receiver.
NorthAmerica_Cingular_T-mobile.fm Page 117 Tuesday, May 16, 2006 7:52 AM
Health and safety information
125
• Avoid exposing your phone and accessories to rain
or liquid spills. If your phone does get wet,
immediately turn the power off and remove the
battery. If it is inoperable, call Customer Care for
service.
Availability of Various Features/Ring
Tones
Many services and features are network dependent
and may require additional subscription and/or usage
charges. Not all features are available for purchase or
use in all areas. Downloadable Ring Tones may be
available at an additional cost. Other conditions and
restrictions may apply. See your service provider for
additional information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone
usage patterns and conditions. Battery power
consumption depends on factors such as network
configuration, signal strength, operating temperature,
features selected, frequency of calls, and voice, data,
and other application usage patterns.
Battery Precautions
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time
to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
NorthAmerica_Cingular_T-mobile.fm Page 118 Tuesday, May 16, 2006 7:52 AM
Health and safety information
126
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-
approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than a
week, since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and lifetime of the battery.
Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between the
+ and - terminals of the battery (metal strips on
the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the
terminals may damage the battery or the object
causing the short-circuiting.
• Dispose of used batteries in accordance with local
regulations. In some areas, the disposal of
batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion
batteries, contact your nearest Samsung
authorized service center. Always recycle. Do not
dispose of batteries in a fire.
NorthAmerica_Cingular_T-mobile.fm Page 119 Tuesday, May 16, 2006 7:52 AM
Health and safety information
127
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Keep the phone and all its parts and accessories
out of the reach of small children.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode electronic
circuits.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
• Do not use or store the phone in dusty, dirty areas,
as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit
boards.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with
a soft cloth slightly dampened in a mild soap-and-
water solution.
• Do not paint the phone. Paint can clog the device's
moving parts and prevent proper operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
• When the phone or battery gets wet, the label
indicating water damage inside the phone changes
color. In this case, phone repairs are no longer
guaranteed by the manufacturer's warranty, even
if the warranty for your phone has not expired.
• If your phone has a flash or light, do not use it too
close to the eyes of people or animals. This may
cause damage to their eyes.
NorthAmerica_Cingular_T-mobile.fm Page 120 Tuesday, May 16, 2006 7:52 AM
Health and safety information
128
• Use only the supplied or an approved replacement
antenna. Unauthorized antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
NorthAmerica_Cingular_T-mobile.fm Page 121 Tuesday, May 16, 2006 7:52 AM
129
Index
A
ABC mode, text input • 25
Active flip • 97
Alarm • 80
Answering
call • 28
second call • 30
Anykey answer • 97
Auto redial • 97
B
Background image • 98
Backlight, set
display • 100
keypad • 101
Band selection • 103
Barring, calls • 102
Battery
charging • 7
low indicator • 8
precautions • 108
Biorhythm • 46
Bluetooth
receiving, data • 51
sending, data • 51
settings • 49
Broadcast messages • 76
Browser, web • 55
C
Calculator • 86
Call cost • 34
Call log
dialled • 33
missed • 33
received • 33
Call time • 33
Caller groups • 37
Caller ID • 103
Calls
answering • 28
barring • 102
diverting • 101
holding • 29
making • 27
redialling • 28
rejecting • 28
waiting • 102
Calories • 47
Camera
photos • 88
videos • 91
CB (Cell Broadcast) messages •
76
Characters, enter • 25
Configuration messages • 65
Connection tone • 100
Converter • 86
Creating messages
e-mail • 62
MMS • 60
SMS • 59
D
Date, set • 95
Deleting
call log • 33
e-mail • 67, 69
items • 84
MMS • 64, 65, 69
phonebook • 39
SMS • 64, 65, 69
Dialled calls • 33
Dialling display, set • 99
Display
brightness • 98
icons • 10
language • 95
layout • 10
settings • 98
Diverting, calls • 101
Document files • 79
DRM (Digital Rights
Management) • 76
DTMF tones, send • 31
E
E-mails
creating/sending • 62
deleting • 67
setting • 72
viewing • 66
Emergency calls • 112
F
FDN (Fixed Dialling Number)
mode • 104
File manager • 76
Fragrance type • 45
G
Games • 43, 51
Greeting message • 95
130
Index
H
Health and safety • 107
Height/Weight ratio • 47
Holding, call • 29
I
Icons, description • 10
Image editor • 43
Images, downloaded • 77
Inbox, messages
e-mail • 66
MMS/SMS • 63
International calls • 27
Internet • 55
K
Key tones
selecting • 99
sending/muting • 30
volume • 99
Kid predictor • 44
L
Language, select • 95
Last number, redial • 28
Light settings • 100
Locking
menu functions • 104
phone • 104
SIM card • 104
Low battery indicator • 8
M
Memory status
file manager • 80
messages • 76
phone • 105
phonebook • 39
Message tone • 100
Messages
cell broadcast • 76
configuration • 65
e-mail • 62
greeting • 95
MMS • 60
push • 65
SMS • 59
Minute minder • 100
Missed calls • 33
MMS messages
creating/sending • 60
deleting • 64
setting • 70
viewing • 63
Multiparty-call • 31
Music player • 39
Music, downloaded • 79
My files • 76
My menu • 96
N
Name card • 38
Names
entering • 25
searching • 34
Network band, select • 103
Network selection • 102
Network services • 100
Numbers
searching • 34
storing • 36
O
Offline mode • 8, 98
Outbox, messages • 65
P
Password
call barring • 102
phone • 104
Phone
care and maintenance •
113
display • 10
icons • 10
locking • 104
password • 104
resetting • 105
switching on/off • 8
unpacking • 6
Phonebook
adding • 36
deleting • 39
editing • 35
finding • 34
managing • 38
options • 35
speed dialling • 37
Photos
editing • 43, 44
taking • 88
viewing • 77
PIN, change • 104
PIN2, change • 104
Pink schedule • 48
Power on/off tone • 100
Privacy • 104
Problems, solve • 105
Push messages • 65, 75
R
Received calls • 33
Received messages
131
Index
e-mail • 66
MMS/SMS • 63
Recording
videos • 91
voice memos • 42
Redialling
automatically • 97
manually • 28
Resetting phone • 105
Ringer
incoming calls • 99
messages • 100
Road safety • 109
Roaming • 102
S
Safety
information • 107
precaution • 1
Security, calls • 103
Sent messages • 66
Shopping list • 48
Shortcut • 95
Silent mode
entering • 14
setting • 100
SIM card
inserting • 7
locking • 104
Skin colour • 98
SMS messages
creating/sending • 59
deleting • 64
setting • 69
viewing • 63
Sound settings • 99
Sounds, downloaded • 79
Speakerphone • 30
Speed dial • 37
Stopwatch • 87
Switching on/off
microphone • 30
phone • 8
T
T9 mode, text input • 26
Templates, message • 68
Text, enter • 25
Time, set • 95
Timer • 87
V
Videos
playing • 78
recording • 91
Voice recognition
feature accessing • 24,
53
name dialling • 23, 53
settings • 54, 97
Voice recorder
playing • 42
recording • 42
Voicemail server • 103
W
Waiting call • 102
Wallpaper • 98
Web browser
access • 55
bookmarks • 56
World time • 85