Samsung Electronics Co SGHE608 Single-Band PCS GSM Phone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	412489
Application ID	lyCAorR3J8+7Z4wmaX3x3g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	316.95kB (3961909 bits)
Date Submitted	2004-04-07 00:00:00
Date Available	2004-04-07 00:00:00
Creation Date	2004-03-31 17:26:18
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2004-03-31 17:27:48
Document Title	Users Manual

* Some of the contents in this manual may differ from your phone,
depending on the software installed or your service provider.
TRI BAND
GPRS TELEPHONE
SGH-E608
User’s Manual
ELECTRONICS
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.: GH68-04935A
English. 03/2004. Rev. 1.0
FCC RF EXPOSURE INFORMATION
In August 1996 the Federal Communications Commission (FCC) of
the United States with its action in Report and Order FCC 96-326
adopted an updated safety standard for human exposure to radio
frequency electromagnetic energy emitted by FCC regulated
transmitters. Those guidelines are consistent with the safety
standards previously set by both U.S. and international standards
bodies. The design of this phone complies with the FCC guidelines
and these international standards.
Use only the supplied antenna or one that is approved.
Unauthorized antennas, modifications, or attachments could impair
call quality, damage the phone, or result in a violation of FCC
regulations.
Do not use the phone with a damaged antenna. If a damaged
antenna comes into contact with the skin, a minor burn may result.
Please contact your local dealer for a replacement antenna.
Body-worn Operation
This device was tested for typical body-worn operations with the back
of the phone kept 1.5 cm. from the body. To maintain compliance
with FCC RF exposure requirements, use only belt-clips, holsters
or similar accessories that maintain at least a 0.59 inch (1.5 cm.) separation
distance, between the user's body and the back of the phone, including
the antenna, whether extended or retracted. The use of belt-clips,
holsters and similar accessories should not contain metallic
components in its assembly. The use of accessories that do not
satisfy these requirements may not comply with FCC RF
exposure requirements, and should be avoided.
Vehicle Mounted External Antenna (optional, if
available.)
A minimum separation distance of 7.9 inches (20cm) must be
maintained between a person and the vehicle mounted external
antenna to satisfy FCC RF exposure requirements.
For more information about RF exposure, please visit the FCC web
site at www
Contents
Important Safety Precautions . . . . . . . . . . . 7
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Your Phone . . . . . . . . . . . . . . . . . . . . . . . .
Phone Layout . . . . . . . . . . . . . . . . . . . . . . . . .
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Service Light . . . . . . . . . . . . . . . . . . . . . . . . .
Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10
10
13
16
16
Getting Started . . . . . . . . . . . . . . . . . . . . .
Installing the SIM Card . . . . . . . . . . . . . . . . . .
Charging a Battery . . . . . . . . . . . . . . . . . . . . .
Switching the Phone On or Off . . . . . . . . . . . . .
17
17
19
24
Call Functions . . . . . . . . . . . . . . . . . . . . . .
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Volume . . . . . . . . . . . . . . . . . . .
Answering a Call. . . . . . . . . . . . . . . . . . . . . . .
Viewing Missed Calls . . . . . . . . . . . . . . . . . . . .
Quickly Switching to Silent mode . . . . . . . . . . .
25
25
27
28
29
31
Selecting Functions and Options . . . . . . . . 32
Phone Book . . . . . . . . . . . . . . . . . . . . . . . .
Storing a Number with a Name . . . . . . . . . . . .
Using Phone Book Entry Options . . . . . . . . . . .
Searching for and Dialling a Number
in the Phone Book . . . . . . . . . . . . . . . . . . . . .
Editing a Caller Group . . . . . . . . . . . . . . . . . . .
Speed-dialing . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting All of the Phone Book Entries . . . . . . .
Checking the Memory Status . . . . . . . . . . . . .
Using the Service Dialling Numbers . . . . . . . . .
34
34
37
38
40
41
43
44
45
Entering Text . . . . . . . . . . . . . . . . . . . . . . . 46
Changing the Text Input Mode . . . . . . . . . . . . . 47
Using Chinese Pinyin Mode . . . . . . . . . . . . . . . 49
Using Chinese Stroke Mode . . . . . . . . . . . . . . . 52
Using My Words Mode . . . . . . . . . . . . . . . . . . . 55
Using Quick English Mode . . . . . . . . . . . . . . . . 57
Using English Mode. . . . . . . . . . . . . . . . . . . . . 59
Using Number Mode . . . . . . . . . . . . . . . . . . . 61
Using Symbolic Mode . . . . . . . . . . . . . . . . . . . 61
Using Help . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Contents
Contents
Options During a Call . . . . . . . . . . . . . . . . . 63
Putting a Call on Hold . . . . . . . . . . . . . . . . . . . 63
Using the Menu Functions . . . . . . . . . . . . . . . . 64
Switching the Microphone Off (Mute) . . . . . . . . 65
Muting or Sending Key Tones . . . . . . . . . . . . . . 66
Sending a Sequency of DTMF Tones . . . . . . . . . 66
Searching for a Number in Phone Book . . . . . . . 67
Using the SMS Service . . . . . . . . . . . . . . . . . . . 67
Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Making a Multiparty Call . . . . . . . . . . . . . . . . . 68
Using the Menus . . . . . . . . . . . . . . . . . . . .
Accessing Menu Functions by Scrolling . . . . . . .
Using Shortcuts . . . . . . . . . . . . . . . . . . . . . . .
List of Menu Functions . . . . . . . . . . . . . . . . . .
71
71
72
73
Text Messages . . . . . . . . . . . . . . . . . . . . . .
Inbox (Menu 1.1) . . . . . . . . . . . . . . . . . . . . . .
Outbox (Menu 1.2) . . . . . . . . . . . . . . . . . . . . .
Write New (Menu 1.3) . . . . . . . . . . . . . . . . . . .
Templates (Menu 1.4) . . . . . . . . . . . . . . . . . . .
Settings (Menu 1.5) . . . . . . . . . . . . . . . . . . . .
Delete All (Menu 1.6) . . . . . . . . . . . . . . . . . . .
Memory Status (Menu 1.7). . . . . . . . . . . . . . . .
Voice Mail (Menu 1.8) . . . . . . . . . . . . . . . . . . .
Broadcast (Menu 1.9) . . . . . . . . . . . . . . . . . . .
79
79
81
82
85
85
87
87
88
89
Multimedia Messages. . . . . . . . . . . . . . . . . 91
Inbox (Menu 2.1) . . . . . . . . . . . . . . . . . . . . . . 91
Outbox (Menu 2.2) . . . . . . . . . . . . . . . . . . . . . 94
Draft (Menu 2.3) . . . . . . . . . . . . . . . . . . . . . . . 96
Write New (Menu 2.4) . . . . . . . . . . . . . . . . . . . 96
Templates (Menu 2.5) . . . . . . . . . . . . . . . . . . 100
Delete All (Menu 2.6) . . . . . . . . . . . . . . . . . . . 101
Memory Status (Menu 2.7) . . . . . . . . . . . . . . . 101
Setup (Menu 2.8) . . . . . . . . . . . . . . . . . . . . . 102
MMS Profile (Menu 2.9) . . . . . . . . . . . . . . . . . 103
Call Records . . . . . . . . . . . . . . . . . . . . . . .
Missed Calls (Menu 3.1) . . . . . . . . . . . . . . . . .
Received Calls (Menu 3.2) . . . . . . . . . . . . . . .
Dialled Calls (Menu 3.3) . . . . . . . . . . . . . . . . .
Delete All (Menu 3.4) . . . . . . . . . . . . . . . . . .
Call Time (Menu 3.5) . . . . . . . . . . . . . . . . . . .
Call Cost (Menu 3.6) . . . . . . . . . . . . . . . . . . .
105
105
106
106
107
108
109
Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Take Photos (Menu 4.1) . . . . . . . . . . . . . . . . . 110
My Photos (Menu 4.2) . . . . . . . . . . . . . . . . . . 115
Take Videos (Menu 4.3) . . . . . . . . . . . . . . . . . 116
My Videos (Menu 4.4) . . . . . . . . . . . . . . . . . . . . . 117
Delete All (Menu 4.5) . . . . . . . . . . . . . . . . . . . . . 118
Memory Status (Menu 4.6) . . . . . . . . . . . . . . . 118
Sound Settings. . . . . . . . . . . . . . . . . . . . .
Ring Tone (Menu 5.1) . . . . . . . . . . . . . . . . . .
Ring Volume (Menu 5.2) . . . . . . . . . . . . . . . .
Alert Type (Menu 5.3) . . . . . . . . . . . . . . . . . .
Keypad Tone (Menu 5.4) . . . . . . . . . . . . . . . .
Message Tone (Menu 5.5). . . . . . . . . . . . . . . .
Folder Tone (Menu 5.6) . . . . . . . . . . . . . . . . .
Power On/Off (Menu 5.7) . . . . . . . . . . . . . . .
Alerts On Call (Menu 5.8) . . . . . . . . . . . . . . .
Extra Tones (Menu 5.9) . . . . . . . . . . . . . . . . .
119
119
119
120
120
121
122
122
123
123
Phone Settings. . . . . . . . . . . . . . . . . . . . .
Infrared Activate (Menu 6.1) . . . . . . . . . . . . .
Display Settings (Menu 6.2) . . . . . . . . . . . . .
Greeting Message (Menu 6.3) . . . . . . . . . . . . .
Own Number (Menu 6.4) . . . . . . . . . . . . . . . .
Language (Menu 6.5). . . . . . . . . . . . . . . . . . .
Security (Menu 6.6) . . . . . . . . . . . . . . . . . . . .
Extra Settings (Menu 6.7) . . . . . . . . . . . . . . .
Short Cut (Menu 6.8) . . . . . . . . . . . . . . . . . . .
Reset Settings (Menu 6.9) . . . . . . . . . . . . . . .
124
124
125
127
128
128
128
132
133
134
Organiser . . . . . . . . . . . . . . . . . . . . . . . . .
Alarm (Menu 7.1) . . . . . . . . . . . . . . . . . . . . .
Calendar (Menu 7.2) . . . . . . . . . . . . . . . . . . .
Time & Date (Menu 7.3). . . . . . . . . . . . . . . . .
Calculator (Menu 7.4) . . . . . . . . . . . . . . . . . .
To Do List (Menu 7.5) . . . . . . . . . . . . . . . . . .
Voice Memo (Menu 7.6) . . . . . . . . . . . . . . . . .
Currency Exchange (Menu 7.7) . . . . . . . . . . . .
135
135
137
139
141
142
145
147
Network Services . . . . . . . . . . . . . . . . . . .
Call Diverting (Menu 8.1) . . . . . . . . . . . . . . . .
Call Barring (Menu 8.2) . . . . . . . . . . . . . . . . .
Call Waiting (Menu 8.3) . . . . . . . . . . . . . . . . .
Network Selection (Menu 8.4) . . . . . . . . . . . . .
Caller ID (Menu 8.5) . . . . . . . . . . . . . . . . . . .
Closed User Group (Menu 8.6) . . . . . . . . . . . .
Band Selection (Menu 8.7) . . . . . . . . . . . . . . .
148
148
150
152
153
154
154
156
Contents
Funbox . . . . . . . . . . . . . . . . . . . . . . . . . . .
WAP Browser (Menu 9.1) . . . . . . . . . . . . . . . .
Fun Club (Menu 9.2) . . . . . . . . . . . . . . . . . . .
Games & More (Menu 9.3) . . . . . . . . . . . . . . .
Sounds (Menu 9.4) . . . . . . . . . . . . . . . . . . . .
Images (Menu 9.5) . . . . . . . . . . . . . . . . . . . .
Delete All (Menu 9.6) . . . . . . . . . . . . . . . . . . .
Memory Status (Menu 9.7) . . . . . . . . . . . . . . .
157
157
163
165
168
168
169
169
Solving Problems . . . . . . . . . . . . . . . . . . . 170
Access Codes . . . . . . . . . . . . . . . . . . . . . .
Phone Password . . . . . . . . . . . . . . . . . . . . . .
PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PUK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PIN2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PUK2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Barring Password . . . . . . . . . . . . . . . . . . . . .
173
173
174
174
175
175
176
Health and Safety Information . . . . . . . .
Exposure to Radio-Frequency Energy
(SAR Information) . . . . . . . . . . . . . . . . . . . .
Precautions When Using Batteries. . . . . . . . . .
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Environment . . . . . . . . . . . . . . . . .
Electronic Devices . . . . . . . . . . . . . . . . . . . . .
Potentially Explosive Environments . . . . . . . . .
Emergency Calls . . . . . . . . . . . . . . . . . . . . . .
Other Important Safety Information . . . . . . . .
Care and Maintenance . . . . . . . . . . . . . . . . . .
177
177
178
180
180
181
183
184
185
186
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . 188
Quick Reference Card . . . . . . . . . . . . . . . 195
Important Safety
Precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving;
park the vehicle first.
Switching Off When Refuelling
Do not use the phone at a refuelling point
(service station) or near fuels or chemicals.
Switching Off in an Aircraft
Wireless phones can cause interference. Using
them in an aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch your phone off near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to
interference, which could affect their
performance.
Special Regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for
example).
Important Safety Precautions
Unpacking
Sensible Use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna
when the phone is switched on.
Your package contains the following items. The
illustrations below may look different from your
phone and accessories:
Emergency Call
Ensure the phone is switched on and in service.
Key in the emergency number for your present
location, then press the
key. You must
deactivate any unnecessary features before you
can make an emergency call. Give all the
necessary information as accurately as possible.
Do not cut off the call until given permission to
do so.
Water Resistance
Your phone is not water-resistant. Keep it dry.
Handset
Travel Adapter
Batteries
Battery Charger
Accessories and Batteries
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories
could damage your phone and may be
dangerous.
User’s Manual
software CD-ROM
Data cable
Hand Strap
Qualified Service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see “Health
and Safety Information” on page 177.
CAUTION
RISK OF EXPLOSION IF A BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
Note: The items supplied with your phone may be
different, depending upon your country or
service provider.
Your Phone
Your Phone
Key(s)
Phone Layout
The following illustrations show the main
elements of your phone:
Description
In Menu mode, scroll through the menu
options and Phone Book.
In Idle mode, allow you to access your
favourite menu options directly. For
further details about shortcuts, see
page 134.
Earpiece
Folder
Display
In Menu mode, the Left key returns to
the previous menu level and the Right
key selects the current menu.
When entering text, move the cursor to
the left and right respectively.
Navigation (Up/
Down/ Left/
Right) keys
In Idle mode, the Left key allows you
to quickly access the Text Messages
menu, and the Right key allows you to
access the Voice Memo menu.
WAP Browser
key
Soft key (right)
Soft key (left)
Volume/menu
browse keys
Dial/menu
confirmation key
Power on/off /
menu exit key
Cancel/
correction key
Alphanumeric
keys
IrDA port
Special function
keys
Microphone
Perform the functions indicated by the
text above them, on the bottom line of
(soft keys) the display.
In Idle mode, launches the WAP
(Wireless Application Protocol) Browser.
Deletes characters from the display.
In Menu mode, returns to the previous
menu level.
Makes or answers a call.
Antenna
In Idle mode, recalls the last number
dialled or received when held down.
Camera Key
In Menu mode, selects a menu function
or stores information that you have
entered, such as a name in the phone
or SIM memory.
Camera
Service light
10
11
Your Phone
Key(s)
Your Phone
Description (continued)
Display
Ends a call. Also switches the phone on
and off when held down.
Display Layout
In Menu mode, cancels your input and
returns to Idle mode.
The display has three areas.
In Idle mode, accesses your voice mail
when held down.
Icons
Enter numbers, letters and some
special characters.
Text and
graphic area
Enter special characters.
Perform various functions.
(on the right side of the phone)
In Idle mode, accesses the Camera
menu to allow you to use the camera
application. Turns the camera on when
held down.
In Capture mode, works as a camera
shutter.
(on the left side of the phone)
During a call, adjust the earpiece
volume.
In Idle mode, with the fold open,
adjust the keypad tone volume. With
the folder closed, turn the external
display on when held down.
In Menu mode, scroll through the
menu options and Phone Book.
12
Menu
Name
Soft key
Indicators
Area
Description
First line
Displays various icons. See page
14.
Middle lines
Displays messages, instructions
and any information that you
enter, such as the number you
are dialling.
Last line
Shows the current functions
assigned to the two soft keys.
13
Your Phone
Icons
Icon
Icon
Description (continued)
Description
Appears when the IrDA port is active.
For details, see page 124.
Shows the received signal strength. The
greater the number of bars, the
stronger the signal.
Appears when Mute mode is active.
Appears when a call is in progress.
Appears when you are out of your
service area. When it displays, you
cannot make or receive a call.
Appears when you are connected to the
GPRS network.
Appears when you are out of your home
area and have logged onto a different
network; for example, when travelling
in other countries.
Appears when a new text message has
been received.
Appears when a new voice mail
message has been received.
Appears when a new multimedia
message has been received.
Appears when you set an alarm to ring
at a specified time.
Appears when Silent mode is active or
when you set the Alert Type menu
(Menu 5.3) so that the phone vibrates
when you receive a call. For further
details, see page 31 and page 120
respectively.
14
Your Phone
Shows the level of your battery. The
more bars you see, the more power you
have remaining.
Backlight
The backlight illuminates the display and the
keypad. When you press any key or open the
folder, the backlight turns on. It turns off when
no keys are pressed within a given period of
time, depending on your setting in the Back
Light menu (Menu 6.2.4). The display turns off
after one minute to conserve your battery power.
To specify the length of time the backlight is
active, set the Back Light menu. See page 126
for further details.
External Display
Your phone has an external display on the folder.
It indicates when you have an incoming call or a
message. It also alerts you at the specified time
when you have set an alarm by turning on its
backlight and showing the corresponding icon on
it.
You can select a colour of the default image to
be displayed in the Front LCD menu (Menu
6.2.2). See page 126 for further details.
15
Your Phone
Getting Started
To turn the display on when the folder is closed,
press and hold one of the Volume keys on the
left side of the phone. You can also press the
Camera key on the right side of the phone
whether the folder is opened or closed.
Service Light
The service light is on the folder. It flashes when
services are available on the phone.
To activate or deactivate the service light, set
the Service Light menu (Menu 6.2.5). See
page 126 for further details.
Service light
Installing the SIM Card
When you subscribe to a cellular network, you
are provided with a plug-in SIM card loaded with
your subscription details, such as your PIN, any
optional services available and so on.
Important! The plug-in SIM card and its
contacts can be easily damaged by
scratches or bending, so be careful
when handling, inserting or
removing the card.
Keep all SIM cards out of the reach
of small children.
1. If necessary, switch off the phone by holding
down the
key until the power-off image
displays.
2. Remove the battery. To do so:
➀ Slide the battery lock towards the top of
the phone and hold it in that position.
➁ Lift the battery away, as shown.
Camera
The camera module on the folder of your phone
allows you to take a photo and record a video
while on the move.
For further details about the Camera feature, see
page 110.
16
17
Getting Started
3. Slide the SIM card into the SIM card socket,
as shown, so that it locks the card into
position.
Make sure the gold contacts of the card face
into the phone.
Note: When you need to remove the SIM card,
slide it upwards, as shown, and take it
out of the socket.
Getting Started
5. Press the battery down until it clicks into
place. Make sure that the battery is properly
installed before switching the power on.
Charging a Battery
Your phone is powered by a rechargeable Li-ion
battery. A travel adapter comes with your phone
for charging the battery. Use only approved
batteries and chargers. Ask your local Samsung
dealer for further details.
The travel adapter allows you to use the phone
while the battery is charging, but this causes the
phone to charge more slowly.
4. Replace the battery so that the tabs on the
end align with the slots at the bottom of the
phone.
18
Note: You must fully charge the battery before
using your phone for the first time. A
discharged battery is fully recharged in
approximately 200 minutes.
19
Call Functions
Using the Battery Charger
Call Functions
3. Plug the adapter into a standard AC wall
outlet.
You can charge the battery by using the battery
charger.
The LED on the charger indicates the
charging progress with the following colours:
1. Insert the battery into the charger, ensuring
that the terminals on the battery are in
contact with those on the charger. Press the
battery until it clicks into place.
• Red: the battery is being charged.
• Green: the battery is completely charged.
• Yellow: the battery is not correctly plugged
in or is operating at a too high or too low
temperature.
4. When charging is finished, unplug the adapter
from both the power outlet and the charger.
2. Plug the connector of the travel adapter into
the jack at the bottom of the charger.
5. Remove the battery from the charger.
20
21
Getting Started
Getting Started
Using the Travel Adapter
Low Battery Indicator
The travel adapter allows you to use the phone
while the battery is charging, but this causes the
phone to charge more slowly.
When the battery is weak and only a few
minutes of talk time remain, a warning tone
sounds and a message repeats at regular
intervals on the display. When this happens,
your phone turns off the backlight to conserve
the remaining battery power.
1. With the battery in position on the phone,
plug the connector of the travel adapter into
the jack at the bottom of the phone.
When the battery level becomes too low, the
phone automatically turns off.
2. Plug the adapter into a standard AC wall
outlet.
3. When charging is finished, unplug the adapter
from the power outlet and disconnect it from
the phone by pressing the buttons on both
sides of the connector and pulling the
connector out.
Note: You must unplug the adapter before
removing the battery from the phone during
charging; otherwise, the phone could be
damaged.
22
23
Getting Started
Call Functions
Switching the Phone On or Off
Call Functions
Making a Call
1. Open the folder.
2. Press and hold the
switches on.
key until the phone
3. If the phone asks you to enter a password,
enter the password and press the OK soft
key. It is preset to “00000000” at the factory.
For further details, see page 173.
4. If the phone asks for a PIN, enter the PIN and
press the OK soft key. For further details, see
page 174.
The phone searches for your network and,
after finding it, the idle screen appears on the
display. Now, you can make or receive a call.
Note: The display language is preset to English
at the factory. To change the language,
use the Language menu (Menu 6.5).
For further details, see page 128.
5. When you wish to switch the phone off, press
and hold the
key until the power-off
image displays.
24
When the idle screen displays, enter the area
code and phone number, then press the
key.
Note: When you activate the Auto Redial option
in the Extra Settings menu (Menu 6.7),
the phone automatically redials up to ten
times if the person does not answer the call
or is already on the phone. See page 132 for
further details.
Making an International Call
1. Press and hold the 0 key.
The + character appears.
2. Enter the country code, area code and phone
number and press the
key.
Correcting the Number
To clear
Press the
the last digit
displayed
C key.
any other digit
in the number
Left or Right key until the
cursor is immediately to
the right of the digit to be
cleared. Press the C key.
You can also insert a
missing digit simply by
pressing the appropriate
key.
the whole display
C key and hold it for more
than one second.
25
Call Functions
Call Functions
Ending a Call
Making a Call from Phone Book
When you want to end your call, briefly press
the
key or close the folder.
Redialling the Last Number
The phone stores the numbers you’ve dialled,
received or missed if the caller is identified. See
“Call Records” on page 105 for further details.
To recall any of these numbers:
1. If you have typed characters on the display,
press the
key to return to Idle mode.
2. Press the
key to display a list of the last
numbers in the order you made or received
them.
3. Use the Up and Down keys to scroll through
the numbers until the number you want
highlights.
4. To
dial the number
26
Adjusting the Volume
During a call, if you want to adjust the earpiece
volume, use the Volume keys on the left side of
the phone.
Press the
key to increase the volume level and
the
key to decrease the level.
Press the
key.
edit the number
Options soft key and
select Edit. Change the
number, referring to
“Correcting the Number”
on page 25.
delete the number
Options soft key and
select Delete.
delete all of the
numbers on the
Call Log list
You can store the phone numbers that you use
regularly in the SIM card or the phone’s
memory, which are collectively called Phone
Book. Simply select a name to recall the
associated number. For further details about the
Phone Book features, see page 34.
Options soft key and
select Delete All.
For further details, see
page 107.
In Idle mode, you can also adjust the keypad
tone volume using these keys.
27
Call Functions
Call Functions
Answering a Call
Viewing Missed Calls
When somebody calls you, the phone rings and
displays the incoming call image.
When you are unable to answer a call for any
reason, you can find out who called you so that
you can call the person back.
When the caller can be identified, the caller’s
phone number or name, if stored in your Phone
Book, displays.
1. If necessary, open the folder. Press the
or the Accept soft key to answer the
incoming call.
key
When the Anykey Answer option in the
Extra Settings menu (Menu 6.7) is
activated, you can press any key to answer a
call except for the
key and the Reject
soft key. See page 133.
When the Active Folder option in the Extra
Settings menu (Menu 6.7) is activated, you
can answer the call simply by opening the
folder. See page 133.
Note: To reject the call, press and hold one of
the Volume keys before opening the
folder, or press the Reject soft key or
key.
2. End the call by closing the folder or pressing
the
key.
Note: You can answer a call while using Phone
Book or menu features. After ending the
call, the display returns to the function
screen you were using.
The number of calls you missed displays on the
idle screen immediately after a call is missed.
To view the missed call immediately:
1. If the phone is closed, open the folder.
2. Press the View soft key.
The number for the most recent missed call
displays, if available.
3. To
scroll through the
missed calls
Press the
Up or Down key.
call the number
displayed
edit or delete a
missed call number
key.
Select soft key
See below.
Editing a Missed Call Number
Note: When the number for the missed call is not
available, the Edit option does not display.
1. Press the Options soft key.
2. Press the Up or Down key to highlight the
Edit option.
28
29
Call Functions
Call Functions
3. Press the Select soft key.
4. Change the number.
5. To
call the number
store the
number
Press the
key.
Save soft key and enter
the name and location.
For further details, refer
to page 34.
Deleting a Missed Call
Quickly Switching to Silent Mode
Silent mode is convenient when you wish to stop
the phone from ringing, in a theatre for
example.
key until
In Idle mode, press and hold the
the “Silent Mode” message and the Vibration
icon ( ) display.
In Silent mode, your phone changes the sound
settings as follows:
Option
New Setting
Alert Type (Menu 5.3)
Vibration
1. Press the Options soft key.
Keypad Tone (Menu 5.4)
Off
2. If necessary, press the Up or Down key to
highlight the Delete option.
Message Tone (Menu 5.5)
Light + Vibration
Folder Tone (Menu 5.6)
Off
3. Press the Select soft key.
Power off tone
Off
You can press the
key at any time to exit
the Missed Call feature.
Alerts On Call (Menu 5.8)
Off
Extra Tones (Menu 5.9)
Off
Note: You can access the Missed Call feature at
any time by selecting the Missed Calls
menu (Menu 3.1). For further details, see
page 105.
To exit and reactivate the previous sound
settings, press and hold the
key again until
“Exit Silent Mode” appears. The Vibration icon
( ) no longer displays.
Note: When you turn the phone off, Silent mode is
automatically deactivated.
30
31
Selecting Functions
and Options
Your phone offers a set of functions that allow
you to customise it. These functions are
arranged in menus and sub-menus, accessed
using the two soft keys marked
and . Each
menu and sub-menu allows you to view and
alter the settings of a particular function.
The roles of the soft keys vary according to the
function you are currently using; the labels on
the bottom line of the display just above each
key indicates its current role.
Example:
Service Provider
07:30
Tue 04 Nov
Menu
Name
Selecting Functions and Options
To view the various functions and options
available and to select the one you want:
1. Press the appropriate soft key.
2. To
select the:
• function displayed
• option highlighted
Press the
Select soft key or
the Right key.
view the next function
or highlight the next
option on a list
Down key or
key
on the left side of
the phone.
move back to the
previous function
or option on a list
Up key or
key
on the left side
of the phone.
move back up one
level in the structure
Left key,
or C key.
exit the structure
without changing
the settings
soft key
key.
In some functions, you may be asked for a
password or PIN. Enter the code and press the
OK soft key.
Press the left soft
key to access Menu
mode.
32
Press the right soft
key to access the
Phone Book feature.
Note: When you access a list of options, your
phone highlights the current option. If,
however, there are only two options, such as
On/Off or Enable/Disable, your phone
highlights the option that is not currently
active so that you can select it directly.
33
Phone Book
Phone Book
You can store phone numbers and their
corresponding names in both your SIM card and
your phone’s memories. They are physically
separate but are used as a single entity, called
Phone Book.
Storing a Number with a Name
There are two ways to store a number:
• Using the Save soft key in Idle mode
• Using the New Entry option in the Phone
Book menu
Storing a Number in Idle Mode
As soon as you start to enter a number, Save
appears above the left soft key to allow you to
store the number in Phone Book.
1. Enter the number you want to store.
Note: If you make a mistake while entering a
number, correct it using the C key. For
further details, see page 25.
2. When you are sure that it is correct, press the
Save soft key.
3. Select an icon to identify the category of the
number to be stored. Three categories are
available:
• : Mobile phone number
• : Office number
• : Home number
4. Select a memory location, either SIM or
Phone, by pressing the Up or Down key and
press the Select soft key.
Note: When you change phones, any numbers
stored in your SIM card memory are
automatically available with the new
phone, whereas any numbers stored in
the phone’s memory must be reentered.
5. Enter a name and press the OK soft key.
For further details about how to enter
characters, see page 46.
6. If you do not want to save the number and
name in the suggested location, press the C
key to clear the location number and enter
another location by pressing the number keys.
7. Press the OK soft key to store the name and
number.
After storing, the phone displays the Phone
Book entry or name you just created.
9. To
use the entry options
return to the idle
screen
Press the
Options soft key. For
further details, see
page 37.
key.
To select the category, press the Left or Right
key and press the Select soft key.
34
35
Phone Book
Storing a Number Using the Phone
Book Menu
Phone Book
Using Phone Book Entry Options
1. When the idle screen displays, press the
Name soft key.
While accessing any Phone Book entry, press the
Options soft key to use the options for the
entry.
2. Scroll to New Entry by pressing the Up or
Down key and press the Select soft key.
To
Press the
select the
highlighted option
Select soft key or the
Right key.
highlight a different
option
Up or Down key until
the option you want
highlights.
3. Select an icon to identify the category of the
number to be stored by pressing the Left or
Right key, and press the Select soft key.
Note: The E-mail icon (
) is available in this
step. It allows you to save an e-mail
address instead of a phone number.
4. Select a memory location, either SIM or
Phone, by pressing the Up or Down key and
press the Select soft key.
Note: When you are saving an e-mail address,
SIM is not available.
5. Enter a name and press the OK soft key.
For further details about how to enter
characters, see page 46.
6. Enter the number or address you want to
store and press the Save soft key.
7. Continue the procedure from step 6 on page
35 to store the number.
The following options are available:
Paste: allows you to paste the number into the
normal dialling mode. Use this option to dial a
number similar to one in Phone Book, such as a
different extension in the same office.
Use the C key to change the number as
required; see page 25 for further details. When
you are ready to dial, press the
key.
Edit: allows you to edit the name and/or
number.
Select One Entry to change one number for the
selected name. If you change the name, the
number is saved separately.
Select All Entry to change the name of the
entry.
Photo Caller ID: allows you to assign one of
the photos you took using the camera as a caller
ID image to be displayed when you receive a call
from the selected number. For details about
camera feature, see page 110.
36
37
Phone Book
Delete: allows you to delete the selected
number from Phone Book. You are asked to
confirm that you wish to delete the name and
number by pressing the Yes soft key.
Copy: allows you to copy the number to another
location. You can select the memory and the
location number.
Caller Group: allows you to organise your
Phone Book entries in caller groups so that the
phone alerts you in a specific way when a person
from one of your groups calls you. Select one of
the ten groups available.
To remove an entry from a group, select the No
Group option.
For further details about how to change caller
group properties, see page 40.
Add Entry: allows you to add a new number to
the currently selected name.
Searching for and Dialling a
Number in Phone Book
3. Enter the first few letters of the name that
you want to find and press the OK soft key.
The Phone Book entries are listed, starting
with the first entry matching your input.
4. To
Press the
view the highlighted
entry
View soft key.
select a different
entry
Up or Down key until
the entry you want
highlights.
look for a name
starting with a
different letter
key labelled with the
letter you want.
5. Once you have found the entry, press the
key to dial the number, or press the Options
soft key to access the Phone Book entry
options; for further details, see page 37.
Searching for a Number by Caller
Group
After storing numbers in Phone Book, you can
search for them in two ways; by name and by
caller group.
1. When the idle screen displays, press the
Name soft key.
Searching for a Number by Name
2. Scroll to Group Search by pressing the Up or
Down key and press the Select soft key. You
are asked to enter a group name.
1. When the idle screen displays, press the
Name soft key.
2. Press the Select soft key when Search
highlights. You are asked to enter a name.
38
Phone Book
3. Enter the first few letters of the group name
that you want to find and press the OK soft
key.
The caller groups are listed, starting with the
first group matching your input.
39
Phone Book
Phone Book
4. If necessary, scroll to a group by pressing the
Up or Down key and press the View soft key.
The Phone Book entries in the caller group
are listed.
5. To
Press the
view the
highlighted entry
View soft key.
select a different
entry
Up or Down key
until the entry you
want highlights.
6. Once you have found the entry, press the
key to dial the number, or press the Options
soft key to access the Phone Book entry
options; for further details, see page 37.
• Call Ring Tone: allows you to set a ring
tone to be used when you receive a call
from a person in the group.
• SMS Tone: allows you to set a ring tone to
be used when you receive a message from
a person in the group.
• Graphic: allows you to set a graphic icon to
be displayed when you receive a call from a
person in the group.
• Group Name: allows you to assign a name
to the group. For further details about how
to enter characters, see page 25.
6. When you are finished, press the C or
key.
Speed-dialling
Editing a Caller Group
1. When the idle screen displays, press the
Name soft key.
2. Scroll to Group Edit by pressing the Up or
Down key and press the Select soft key.
3. Scroll through the group list by pressing the
Up or Down key.
4. When the group you want highlights, press
the Options soft key.
5. Select each option and change the settings,
as you want. The following options are
available:
40
Once you have stored phone numbers in Phone
Book, you can set up to eight speed-dial entries
and then dial them easily whenever you want,
simply by pressing the associated number key.
Setting Up Speed-dial Entries
1. When the idle screen displays, press the
Name soft key.
2. Scroll to Speed Dial by pressing the Up or
Down key and press the Select soft key.
3. Select the key to which you wish to assign the
speed-dialling number, from the 2 to 9 keys,
and press the OK soft key.
Note: Memory location 1 is reserved for your
Voice Mail server number.
41
Phone Book
If you have already assigned a number to the
key, the Options soft key replaces the OK
soft key. Go to step 6.
Phone Book
Deleting All of the Phone Book
Entries
4. Enter a few letters of the name you want to
find and press the OK soft key.
You can delete all your entries from your phone’s
memory, your SIM card or both.
5. Select a Phone Book entry from the list and
press the View soft key.
1. When the idle screen displays, press the
Name soft key.
6. Select a number, if the entry has more than
one, by pressing the Up or Down key and
press the Select soft key.
2. Scroll to Delete All by pressing the Up or
Down key and press the Select soft key.
7. Once you have assigned a number to the key,
you can use the following options by pressing
the Options soft key:
• Change: allows you to assign a different
number to the key.
• Delete: allows you to clear the setting so
that no number is assigned to the key.
• Delete All: allows you to clear the settings
for all keys so that no numbers are
assigned to any of the keys.
• Number: allows you to view the number
assigned to the key.
8. When you are finished, press the C or
key.
3. To place a check mark by the memory
location you want to empty, All, SIM or
Phone, press the Mark soft key.
You can remove the check mark by pressing
the Unmark soft key.
4. Press the Delete soft key to delete the
entries in the selected memory location.
5. Enter the phone password and press the OK
soft key.
Note: The password is preset to “00000000” at
the factory. To change this password, see
page 130.
6. When the confirming message appears, press
the Yes soft key.
To cancel the deletion, press the No soft key.
Speed-dialling from the Phone Book
To speed-dial the numbers assigned to the 2 to
9 keys, press and hold the appropriate key.
42
7. When you are finished, press the C or
key.
43
Phone Book
Checking the Memory Status
Using the Service Dialling Numbers
You can check how many names and numbers
are stored in Phone Book, in both the SIM card’s
and phone’s memory. You can also see the
capacity of both memory location.
You can view the list of Service Dialling Numbers
(SDN) assigned by your service provider. These
numbers include emergency numbers, directory
enquiries and voice mail numbers.
1. When the idle screen displays, press the
Name soft key.
1. When the idle screen displays, press the
Name soft key.
2. Select the Memory Status option and press
the Select soft key.
2. Select the SDN option and press the Select
soft key.
3. Press the Up or Down key to view the number
of existing and total entries available in the
SIM card and phone’s memory.
3. Scroll through the numbers by using the Up
or Down key.
4. When you are finished, press the C or
key.
44
Phone Book
4. To dial the number displayed, press the Dial
soft key
Note: This option is available only when your SIM
card supports Service Dialling Numbers.
45
Entering Text
The phone allows you to enter characters for
messages and names in Chinese and English. To
enter Chinese text, the phone provides several
widely used pronunciation based (Pinyin) and
character shape based (Stroke) input methods to
meet the preferences of different users, allowing
for greater convenience and ease of use.
You can also enter any combination of Chinese
characters, alphabets, numbers, special symbols
including punctuation marks and shortcuts.
Entering Text
Note: The available text input modes may be
different, depending on your language
setting. Refer to the following table:
Language
Auailable Modes
ENGLISH
Quick English, English,
Number, Symbolic, My words
Chinese T
Quick English, English, CHN T
Stroke, Number, Symbolic, My Words
Chinese S
Pinying, CHN S Stroke, Quick
Englisk, Englisk, Number, Symbolic,
My Words
The following text input modes are available on
your phone:
• Pinyin mode
• Chinese Simplified Stroke mode
• Quick English mode
• English mode
• Chinese Traditional Stroke mode
• Number mode
Changing the Text Input Mode
When you are in a field that allows characters to
be entered, you will notice the text input mode
indicator on the display.
Example: Entering a name for a Phone Book
entry
Enter Name
• Symbolic mode
• My Words mode
• Help mode
Directions for using each of the text input modes
appear later in this section.
OK
OK
Text input
mode indicator
You can change between Chinese and English
input methods or between numbers and
symbols.
46
47
Entering Text
To change to another text input mode:
1. Press the right soft key labelled with the
current mode.
2. Scroll to the mode you want by pressing the
Up or Down key.
3. To select the highlighted mode, press the
Select soft key.
Note: If you want to exit the menu without
changing to a new mode, press the right
soft key.
4. The selected text input mode indicator
appears at the bottom of the display.
• Chinese Pinyin mode →
• Chinese Simplified Stroke mode →
• Quick English mode →
• English mode →
Entering Text
Using Chinese Pinyin Mode
Pinyin is a system to write the pronunciation of
Chinese words using the Latin alphabet. With the
pinyin input method, you can enter Chinese
characters by keying in the Pinyin string from
the phone’s keypad and the phone automatically
presents the matching words.
This mode allows you to enter Pinyin characters
with only one key press per letter.
Typing Characters in Pinyin Mode
1. Press the keys corresponding to the phonetic
spelling, referring to the alphabets printed on
the keys. Notice that the choices in the
Character Selection Field change. All of the
phonetic spellings corresponding to the keys
you press display.
Example: Typing “
• Chinese Traditional Stroke mode →
” in Pinyin mode
Enter Name
• Number mode →
• Symbolic mode → No Indicator
• My Words mode → No Indicator
• Help mode → No Indicator
OK
Character Selection
Field
Key Stroke Field
Press the 5 and 4
keys to enter “li.”
To select “li”, press
the Right key.
2. Press the Left or Right key to select the Pinyin
you want.
48
49
Entering Text
Entering Text
3. If you cannot find the character on the
display, scroll through the choices in the
Character Selection Field by pressing the
Down key. To move back, press the Up key.
When the character you are typing appears in
the Character Selection Field, you may select
it, without completing the Pinyin spelling for
the character.
4. To select a character, press the 1 key to
activate the Character Selection Field. A
number (7 to ) is added to the beginning of
a corresponding character. With the Character
Selection Field activated, a normal press on
the 7 key to the
key selects the
corresponding character.
Enter Name
OK
To insert a space between characters, press the
key when the cursor blinks in the Text Area.
Scrolling
To move the cursor to the left or right through
your text, press the Left or Right key.
Clearing Strokes and Characters
Press the C key one or more times to remove
key stokes to the left. When the Key Stroke Field
is empty, pressing the C key removes characters
from the Text Area.
Rapid Character Entry
Press the 9 key
to select “ .”
Notes:
• If you enter the first character of a name you
assigned to a My Words item (see page 55), the
display shows you the character along with the
Pinyins for your keypress. To use the item, press
the Right key to highlight the character and then
press the
key.
• If you enter the first three characters of a My
Words item (see page 55), the remaining
characters automatically display. To use the My
Words item, press the Right key to move the
cursor. If you don’t want to use it, enter the next
character you want.
50
Inserting a Space
Rapid character entry is easy in any mode, using
the Character Selection Field. As you enter
characters, your phone predicts the next
character you might want and presents choices
in the Character Selection Field. When the
character you want appears, you may select it as
described in step 4 on page 50.
For example, when you want to type the word
“zhong guo (
),” enter the first character
using the following keystrokes; 9, 4, 6, 6, 1 and
7. You don’t need to complete the Pinyin spelling
to include “guo ( ).” With no extra typing, the
character displays conveniently in the Character
Selection Field for you to choose.
51
Entering Text
Using Chinese Stroke Mode
This mode allows you to enter individual Chinese
strokes, in written order, from top to bottom and
from left to right. Your phone provides Chinese
Simplified Stroke mode and Chinese Traditional
Stroke mode.
The two modes work similarly, but the
characters that appear on the display may differ.
Entering Text
Typing Stokes and Characters in
Stroke Mode
1. To type a character, press the keys
corresponding to its component strokes. Press
the keys on the phone in order that you
would write the strokes, using one press per
stroke.
” in Chinese Traditional
Example: Typing “
Stroke mode
Even though there are many different strokes
used to create Chinese characters, the strokes
are classified into 5 basic categories; heng, shu,
pie, dian and zhe. The basic strokes are printed
on the 1 to 5 keys on the keypad.
To enter a stroke, press the key printed with the
stroke that most closely represents the exact
stroke you want.
The table shows the stroke/key relationship:
Enter Name
OK
Character Selection Field
Press the 7 key to select “
Key Stroke Field
Press the 5 and 3
keys to enter “
”
.”
2. The phone displays your strokes in the Key
Stroke Field and offers character choices in
the Character Selection Field. As you enter
strokes, notice that the choices in the
Character Selection Field change. To scroll
through the choices, press the Down key. To
move back, press the Up key.
52
53
Entering Text
3. When the character you are typing appears in
the Character Selection Field, you may select it
without finishing the stroke sequence for the
character. Characters displayed in the Character
Selection Field correspond to the keys 7 to
on the keypad. To select a character and add it
to your text, press the corresponding key
(7 to
).
Notes:
• If you are uncertain of the order of one or more
strokes, press the 6 key in place of each
questionable stroke. Continue entering strokes until
the character displays in the Character Selection
Field or until you finish the character.
• If you enter the first three characters of a My
Words item (see page 55), the remaining
characters automatically displays. To use the word
you added, press the Right key to move the cursor.
If you don’t want to use it, enter the next
character you want.
Inserting a Space
To insert a space between characters, press the
key when the cursor blinks in the Text Area.
Scrolling
To move the cursor to the left or to right through
your text, press the Left or Right key.
Clearing Strokes and Characters
Press the C key one or more times to remove
strokes to the left. When the Key Stroke Field is
empty, pressing the C key removes characters
from the Text Area.
54
Entering Text
Rapid Character Entry
Rapid character entry is easy in any mode, using
the Character Selection Field. As you enter
characters, your phone predicts the next
character you might want and presents choices
in the Character Selection Field. When the
character you want appears, you may select it as
described in Step 3 on page 54.
In most cases, the character you want appears
in the Character Selection Field before you enter
all of the strokes to build it.
For example, try typing the twelve stroke
character pair “
” using the following
keystrokes; 2, 8, and 7. Even though “
” is a
twelve stroke character pair, your phone enables
you to type it in only three key presses!
Using My Words Mode
This mode allows you to preset Chinese words or
phrases so that you can quickly and easily insert
them into your text while you are creating a
message.
Adding a Word or Phrase onto the My
Words list
1. Press the Select soft key when Add Word is
highlighted.
2. Enter a word or phrase using Pinyin, Quick
English or Stroke mode and press the OK soft
key.
For further details about each mode, see
page 49, page 57 or page 52 respectively.
55
Entering Text
Entering Text
3. Enter a character to assign a name to the
word you added. If necessary, press the C key
to clear the characters.
4. Press the OK soft key.
The word or phrase is added to the My Words
list. The item is saved separately, depending
on the mode you select.
Using My Words
1. Press the right soft key when you are creating
text.
Using My Words Options
1. Select a word or phrase from the My Words
list and press the Options soft key.
2. Scroll to one of the following options and
press the Select soft key:
• Edit Phrase: allows you to change the
word or phrase and then the name assigned
to the item.
• Create Phrase: allows you to add a new
word or phrase.
2. Select My Words using the Up or Down key
and press the Select soft key.
• Delete Phrase: allows you to delete the
item. When a confirming message appears,
press the Yes soft key.
3. Press the
• Select Phrase: allows you to insert a word
or phrase to your text.
key to select the mode you want.
4. Select the word you want using the Up or
Down key.
Or, enter a few letters of the name you want
to find. The word you added displays.
5. Press the Select soft key. The word is
inserted in your text.
Using Quick English Mode
This mode allows you to enter English words
with only one key press per letter. Each key on
the keypad has more than one letter; for
example, when you press the 5 key once, J, K,
or L displays. Quick English mode automatically
compares your key presses to an internal
linguistic database to determine the correct
word.
The English mode requires far fewer keystrokes
than the traditional multi-tap method, English
mode.
56
57
Entering Text
Entering Text
Changing the Case
1. Press keys on the phone just once per letter.
For example, to enter “HELLO,” press the 4,
3, 5, 5 and 6 keys.
The word that you are typing appears on the
display. It may change with each key that you
press.
2. Type the complete word before editing or
deleting any keystrokes.
Scrolling
You can move the cursor through the text by
using the Left or Right keys.
3. If the word is correct, insert a space by
pressing the
key and start entering the
next word.
Clearing Letters and Words
Otherwise, press the 0, Up or Down key
repeatedly to display alternative word choices
for the keys that you pressed.
To delete letters, press the C key. Press and hold
the C key to clear the display.
Example: Both “OF” and “ME” use the 6 and
3 keys. The phone displays the most
commonly used choice first.
Using English Mode
To type words not found in Quick English mode,
change Text input mode to English mode.
Smart Punctuation
To enter periods, hyphens or apostrophes, press
the 1 key. Quick English mode applies grammar
rules to ensure that the correct punctuation is
used.
Example: The 1 key is used twice to display two
punctuation marks:
58
To change the case of the letters, use the
key. There are three cases; Capital Lock( ),
Lower case( ) and Initial Capital( ).
’
When typing in English mode, press the key
labelled with the character you want:
-Once for the first character
-Twice for the second character
and so on. This method is called Multi-tap
typing.
For example, you need to press the 2 key three
times to display the character “C” and the 5 key
two times to display the character “K.”
The cursor moves to the right when you press a
different key. When entering the same letter
twice or a different letter on the same key, just
wait for a few seconds for the cursor to move to
the right automatically, and then select the next
letter.
You can insert a space between the words by
pressing the
key.
59
Entering Text
Entering Text
Refer to the table below for more information
about the characters available:
Characters in the Order Displayed
Key
Upper Case
Lower Case
Space
Using Number Mode
Number mode enables you to enter numbers in
your text, such as a telephone number. Press the
keys corresponding to the digits you want before
manually switching back to the appropriate text
input mode.
Using Symbolic Mode
Symbolic mode enables you to insert symbols in
your text.
Changing the Case
To change the case of the letters, use the
key. There are three cases; Capital Lock( ),
Lower case( ) and Initial Capital( ).
Scrolling
You can move the cursor through the text by
using the Left and Right keys.
Clearing Letters and Words
To
Press the
select a symbol
corresponding number
key.
display more symbols
Up or Down key.
clear the symbol(s)
C key. When the input
field is empty, this key
returns the screen to
the previous mode.
insert the symbol(s)
into your text
OK soft key.
cancel your input
and return to
the previous mode
Back soft key.
To delete letters, press the C key. Press and hold
the C key to clear the display.
60
61
Entering Text
Using Help
On-screen help is available by selecting Help
from the input mode menu. Use the Up and
Down keys to scroll through the Help
information.
Options During a Call
Your phone provides a number of control
functions that you can use during a call.
Putting a Call on Hold
You can place the current call on hold whenever
you want. You can make another call while you
have a call in progress if your network supports
this service.
To place a call on hold, simply press the Hold
soft key. You can reactivate the call whenever
you want, by pressing the Unhold soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial
or look it up in Phone Book.
For details about searching for a number in
Phone Book, see page 38.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or,
1. Put the current call on hold by pressing the
Hold soft key.
2. Make the second call in the normal way.
62
63
Options During a Call
When you have an active call and a call on hold,
you may switch between the two calls, changing
the one on hold to active and placing the other
on hold.
Options During a Call
Switching the Microphone Off
(Mute)
To switch between the two calls, simply press
the Swap soft key.
You can temporarily switch your phone’s
microphone off so that the other person on the
phone cannot hear you.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other person.
Example: You wish to say something to another
person in the room but do not want
the person on the phone to hear you.
When you want to finish, end each call normally
by pressing the
key.
To switch the microphone off temporarily:
1. Press the Options soft key.
Using the Menu Functions
During a call, you can access the main menu
functions.
1. Press the Options soft key.
2. Press the OK soft key when the Menu option
highlights.
3. Press the Up or Down key to scroll through
the menu list.
Note: You cannot use some menus during a
call. They are deactivated on this list.
2. If necessary, press the Down key to highlight
the Mute option.
3. Press the OK soft key.
The other person can no longer hear you.
To switch the microphone back on:
1. Press the Options soft key.
2. If necessary, press the Down key to highlight
the Unmute option.
3. Press the OK soft key.
The other person can hear you again.
4. When the menu you want highlights, press
the Select soft key.
5. If the selected menu has sub-options, repeat
steps 3 and 4.
For further details about the menu functions
available, see the list on page 73.
64
65
Options During a Call
Muting or Sending Key Tones
These options allow you to turn the key tones off
or on. If the Mute Keys option is selected, your
phone does not transmit the DTMF (Dual Tone
Multi-Frequency) tones of the keys, which allows
you to press keys without hearing annoying key
tones during a call.
Note: To communicate with answering machines or
computerised telephone systems, the Send
Keys option must be selected.
Options During a Call
Searching for a Number in Phone
Book
You can search for a number in Phone Book
during a call.
1. Press the Options soft key.
2. Press the Down key to highlight the
Phonebook option.
3. Press the OK soft key.
The Phone Book entries are listed.
Sending a Sequence of DTMF Tones
4. Enter the name that you wish to find.
You can send the DTMF tones after entering the
entire numbers you need to send.
If you enter the first few letters of the name,
the Phone Book entries are listed, starting
with the first entry matching your input.
This option is helpful for entering a password or
an account number when you call an automated
system, like a banking service.
5. To view the highlighted entry, press the View
soft key.
To send the DTMF tones:
For further details about the Phone Book feature,
see page 34.
1. When you are connected to the teleservice
system, press the Options soft key.
2. Press the Down key to highlight the Send
DTMF option.
Using the SMS Service
3. Press the OK soft key.
If you receive an SMS (Short Message Service)
message during a call, the Message icon ( )
flashes on the display. The SMS Service option
enables you to read the message. You can also
write a new text message.
4. Enter the number you want to send and press
the OK soft key.
The tones are sent.
For further details about the SMS service, refer
to page 79.
66
67
Options During a Call
Options During a Call
Call Waiting
You can answer an incoming call while you have
a call in progress, if your network supports this
service and you have set the Call Waiting menu
(Menu 8.3) to Activate; see page 152. You are
notified of an incoming call by a call waiting
tone.
4. To add a new person to the multi-party call,
call the person in the normal way and press
the Options soft key. Select the Join option
and press the OK soft key.
You can add incoming callers by answering the
call, pressing the Options soft key, and
selecting the Join option. Repeat as required.
To answer a call while you have a call in
progress:
1. Press the
3. To join the first participant to the multi-party
call, press the Options soft key and select
the Join option. Press the OK soft key.
key to answer the incoming call.
The first call is automatically put on hold.
2. To switch between the two calls, press the
Swap soft key.
3. To end the call on hold, press the Options
soft key and select the End Held Call option.
To end the current call, press the
key.
Making a Multiparty Call
A multi-party call is a network service that
allows up to six people to take part
simultaneously in a multi-party or conference
call. For further details about subscribing to this
service, contact your service provider.
Setting up the Multiparty Call
1. Call the first participant in the normal way.
Having a Private Conversation With
One Participant
1. Press the Options soft key and choose the
Select One option. Press the OK soft key.
The list of the call participants appears.
2. Highlight a person from the list by pressing
the Up or Down key, and press the Select
soft key or the
key.
3. When the Private option highlights, press the
OK soft key.
Now you can talk privately to that person.
The other participants can still converse with
each other.
4. To return to the multi-party call, press the
Options soft key and select the Join option.
Press the OK soft key.
All the multi-party call participants can now
hear each other.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
68
69
Options During a Call
Dropping One Participant
1. Press the Options soft key and choose the
Select One option. Press the OK soft key.
The list of call participants appears.
2. Highlight a person from the list by pressing
the Up or Down key, and press the Select
soft key or the
key.
3. Press the Down key to select the Remove
option and press the OK soft key.
The call ends with that participant, but you
can continue to talk to the others.
4. When you want to end the multi-party call,
close the folder or press the
key.
Using the Menus
The phone offers a range of functions that allow
you to tailor it to your needs. These functions are
arranged in menus and sub-menus.
The menus and sub-menus can be accessed by
scrolling using the Navigation keys or by using the
shortcuts.
Accessing Menu Functions by Scrolling
1. In Idle mode, press the Menu soft key to
access Menu mode.
2. Scroll using the Up or Down key to reach a main
menu, Phone Settings for example. Press the
Select soft key or the Right key to enter the
menu.
3. If the menu contains sub-menus, Language for
example, you can access them by scrolling using
the Up or Down key and pressing the Select
soft key or the Right key.
If the menu that you have selected contains
further options, repeat this step.
4. To
Up or Down key or use
the Volume keys.
confirm the chosen
setting
Select soft key or
the Right key.
return to the
previous menu level
soft key or the Left
key.
exit the menu
without changing
the settings
70
Press the
scroll through the
menus
key.
71
Using the Menus
Using the Menus
Using Shortcuts
List of Menu Functions
The menu items, such as menu, sub-menus and
options, are numbered and can be accessed
quickly by using their shortcut numbers. The
shortcut number is shown at the bottom right
next to the
soft key on the display. Simply
press the Menu soft key and enter the number
of the menu you want.
The following list shows the menu structure
available and indicates the number assigned to
each option and the page where you can find a
description of each feature.
Notes:
• The numbers assigned to each menu are
indicated on the list on page 63. They may not
match the menu number on the phone,
depending on the services supported by your SIM
card.
• For the menu number 10, press the 0 key.
Example: Accessing the Language menu.
Note: If you use a SIM AT card that provides
additional services, the SIM AT menu
displays when you press the Menu soft key
to enter Menu mode. For further details, see
your SIM card instructions.
1. Text Messages (see page 79)
1.1
1.2
1.3
1.4
1.5
1. Press the Menu soft key.
2. Press 6 for Phone Settings.
3. Press 5 for Language.
1.6
1.7
The languages available displays.
1.8
1.9
Inbox
Outbox
Write New
Templates
Settings
1.5.1 Setting 1*
1.5.2 Setting 2*
1.5.3 Common Setting
Delete All
Memory Status
1.7.1 SIM Memory
1.7.2 PHONE Memory
1.7.3 CB Memory
Voice Mail
1.8.1 Connect to Voice Server
1.8.2 Voice Server Number
Broadcast
1.9.1 Read
1.9.2 Receive
1.9.3 Channel List
1.9.4 Language
* Shown only if supported by your SIM card.
72
73
Using the Menus
2. Multimedia MSGs. (see page 91)
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
Inbox
Outbox
Draft
Write New
Templates
Delete All
Memory Status
Setup
2.8.1 Delivery Report
2.8.2 Read Reply
2.8.3 Auto Download
2.8.4 Message Acceptance
2.8.5 Hide ID
2.8.6 Expiry Date
2.8.7 Delivery Time
2.8.8 Priority
2.8.9 Report Allowed
2.8.10 Page Duration
2.9 MMS Profile
3. Call Records (see page 105)
3.1
3.2
3.3
3.4
3.5
Missed Calls
Received Calls
Dialled Calls
Delete All
Call Time
3.5.1 Last Call Time
3.5.2 Total Sent
3.5.3 Total Received
3.5.4 Reset Timers
3.6 Call Cost*
3.6.1 Last Call Cost
3.6.2 Total Cost
3.6.3 Max Cost
3.6.4 Reset Counters
3.6.5 Set Max Cost
3.6.6 Price/Unit
Using the Menus
4. Camera (see page 110)
4.1
4.2
4.3
4.4
4.5
4.6
Take Photos
My Photos
Take Videos
My Videos
Delete All
Memory Status
5. Sound Settings (see page 119)
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
Ring Tone
Ring Volume
Alert Type
Keypad Tone
Message Tone
5.5.1 SMS Tone
5.5.2 SMS-CB Tone
5.5.3 MMS Tone
Folder Tone
Power On/Off
Alerts On Call
Extra Tones
6. Phone Settings (see page 124)
6.1 Infrared Activate
6.2 Display Settings
6.2.1 Wallpaper
6.2.2 Front LCD
6.2.3 Menu Style
6.2.4 Back Light
6.2.5 Service Light
6.2.6 Graphic Logo
6.3 Greeting Message
6.4 Own Number
6.5 Language
* Shown only if supported by your SIM card.
74
75
Using the Menus
6. Phone Settings
Using the Menus
(continued)
6.6 Security
6.6.1 PIN Check
6.6.2 Change PIN
6.6.3 Phone Lock
6.6.4 Change Password
6.6.5 SIM Lock
6.6.6 Privacy
6.6.7 FDN Mode*
6.6.8 Change PIN2*
6.7 Extra Settings
6.8 Short Cut
6.9 Reset Settings
7. Organiser (see page 135)
7.1 Alarm
7.1.1 Once Alarm
7.1.2 Daily Alarm
7.1.3 Morning Call
7.1.4 Remove Alarm
7.1.5 Autopower
7.2 Calendar
7.3 Time & Date
7.3.1 Set Time
7.3.2 Set Date
7.3.3 World Time
7.3.4 Time Format
7.3.5 Date Format
7.4 Calculator
7.5 To Do List
7.6 Voice Memo
7.6.1 Record
7.6.2 Memo List
7.6.3 Delete All
7.6.4 Memory Status
7.7 Currency Exchange
* Shown only if supported by your SIM card.
76
8. Network Services (see page 148)
8.1 Call Diverting
8.1.1 Divert Always
8.1.2 Busy
8.1.3 No Reply
8.1.4 Unreachable
8.1.5 Cancel All
8.2 Call Barring
8.2.1 All Outgoing
8.2.2 International
8.2.3 International Except to
Home
8.2.4 All Incoming
8.2.5 Incoming While Abroad
8.2.6 Cancel All
8.2.7 Change Barring
Password
8.3 Call Waiting
8.4 Network Selection
8.5 Caller ID
8.6 Closed User Group
8.6.1 Index List
8.6.2 Outside Access
8.6.3 Default Group
8.6.4 Deactivate*
8.7 Band Selection
* Shown only if the Close User Group feature is active.
77
Using the Menus
9. Funbox (see page 157)
9.1 WAP Browser
9.1.1 Home
9.1.2 Favorite
9.1.3 http://
9.1.4 Settings
9.1.5 Clear Cache
9.1.6 Push Message
9.2 Fun Club
9.2.1 SFC Home
9.2.2 Gift Box
9.2.3 Service Area
9.3 Games & More
9.4 Sounds
9.5 Images
9.6 Delete All
9.7 Memory Status
Text Messages
Short Message Service (SMS) allows you to send
and receive short text messages to and from
other GSM mobile phones. In addition, your
phone supports the Enhanced Messaging Service
(EMS), which enables you to include simple
photos, melodies, and animated images in your
messages. To use this feature, you must
subscribe to your service provider’s message
service.
When the Text Message icon (
) appears, you
have received new text messages. If the
memory is full, an error message displays and
you cannot receive any new messages. Use the
Delete option in each message box to delete the
obsolete ones.
Note: You can quickly enter the Text Messages
menu by pressing the Left key in Idle mode.
Inbox
(Menu 1.1)
This message box is used to store the messages
that you have received.
When you enter this menu, the list of messages
in the box displays with the senders’ phone
numbers or names, if available in your Phone
Book.
1. Select a message from the list and press the
View soft key to read the message contents.
2. To scroll through the contents, press the Up
or Down key.
3. To scroll to the previous or next messages,
press the
or
key.
78
79
Text Messages
While reading a message, you can choose the
following options by pressing the Options soft
key:
Delete: allows you to delete the message.
Send: allows you to send/resend the message.
For further details about how to send a
message, see page 82.
Text Reply: allows you to reply to the sender
by sending a text message.
Call Back: allows you to call the sender back.
Cut Address: allows you to extract the sender’s
number and URL, e-mail addresses or phone
numbers from the message text.
Move to Phone: allows you to move the
message from the SIM card to the phone’s
memory. This option is only available when you
select a message stored in the SIM card.
Move to SIM: allows you to move the message
from the phone’s memory to the SIM card. This
option is only available when you select a
message stored in the phone’s memory.
Select Objects: allows you to save media
objects, such as sounds or images, from the
message into your phone. You can use the
objects when writing a message. For details, see
page 84.
Text Messages
Outbox
(Menu 1.2)
This message box is used to store the messages
that you have already sent or will send.
When you enter this menu, the list of messages
in the box displays with the recipients’ phone
numbers or names, if available in your Phone
Book.
1. Select a message from the list and press the
View soft key to read the message contents.
2. To scroll through the contents, press the Up
or Down key.
3. To scroll to the previous or next messages,
press the
or
key.
While reading a message, you can choose the
following options by pressing the Options soft
key:
Delete: allows you to delete the message.
Send: allows you to send/resend the message.
For further details about how to send a
message, see page 82.
Cut Address: allows you to extract the
destination number and URL, e-mail addresses
or phone numbers from the message text.
Move to Phone: allows you to move the
message from the SIM card to the phone’s
memory. This option is only available when you
select a message stored in the SIM card.
80
81
Text Messages
Text Messages
Move to SIM: allows you to move the message
from the phone’s memory to the SIM card. This
option is only available when you select a
message stored in the phone’s memory.
Select Objects: allows you to save media
objects, such as sounds or images, from the
message into your phone. You can use the
objects when writing a message. For details, see
page 84.
Write New
(Menu 1.3)
In this menu, you can write and send a text
message.
Notes:
• You can quickly enter this menu by pressing and
holding the Left key in Idle mode.
• When you add media objects to the message, the
number of characters you can enter decreases.
Creating a Simple Text Message
1. Create your message.
Note: For further details about entering
characters, see page 46.
2. When you finish entering the message, press
the Options soft key. The following options
are available:
• Send Only: allows you to send the
message. The message is deleted after
sending.
• Save Only: allows you to save the
message so that it can be sent later. You
can read the message in your Outbox.
• For further details about Add Objects, Add
Templates, Add Phonebook and Add
Bookmark options, see page 84.
3. Select Send Only or Save and Send, and
press the Select soft key.
If you want to just save the message, select
Save Only. After saving the message, the
phone returns to the Text Messages menu
screen.
4. If you select a save option, choose the
memory location and press the OK soft key.
5. Enter a destination number and press the OK
soft key.
The message is sent.
Note: When the phone fails to send the message,
it asks you if you want to retry. Press the
OK soft key to confirm. Otherwise, press the
Exit soft key to return to the Write New
screen.
Creating a Message using the Options
1. Create your message.
2. Press the Options soft key.
• Save and Send: allows you to save a copy
of the message and then send the message.
You can read the message in your Outbox.
82
83
Text Messages
3. Select one of the following options by using
the Up and Down keys and pressing the
Select soft key:
• Add Objects: allows you to add a sound,
melody, picture or animated image to the
message. Select the category of the object
to be added. In each category, you can
select from the various factory-set items or
choose an item received from other
sources, such as the Internet or other
phones.
• Add Templates: allows you to apply one of
the preset message templates to the text.
Select one of five messages stored in the
Templates menu (Menu 1.4). For further
details, see page 85.
• Add Phonebook: allows you to add a
Phone Book entry to your message. Select
one from the list.
• Add Bookmark: allows you to add a web
page address stored in your Favorite list
(Menu 9.1.2). Select one from the list.
4. Complete the message, and send or save it by
following the procedure from step 2 on page
82.
Text Messages
Templates
(Menu 1.4)
Using this menu, you can preset a maximum of
five messages that you use most frequently.
Select an empty location or the message
template you want and press the Select soft
key.
Edit: allows you to write a new message or edit
the message.
Note: For further details about how to enter
characters, see page 46.
Send Message: allows you to retrieve the
message. Once you have completed the
message, you can send, save and send, or
simply save it. For further details about how to
send a message, see page 82.
Delete: allows you to delete the message. You
are asked to confirm the deletion by pressing the
Yes soft key.
Settings
(Menu 1.5)
In this menu, you can set up default message
information. A setting group is a collection of
settings required to send messages. The number
of setting groups available depends on the
capacity of your SIM card.
Notes:
• The setting options available in this menu may
be different depending on your service
provider.
• The last setting you accessed is automatically
activated for sending messages.
84
85
Text Messages
Text Messages
Setting x (where x is the setting group
number): each group has its own sub-menu.
Delete All
Service Centre: allows you to store or change
the number of your message centre, which is
required when sending messages. You must
obtain this number from your service provider.
This menu allows you to delete all of the text
messages in each message box. You can also
delete all of your messages at one time.
Default Destination: allows you to store the
default destination number. The number
automatically displays on the Destination screen
when you create a message.
To
Press the
select a message box
to clear
Up or Down key.
To delete all of your
messages, select All
Messages.
place a check mark
Mark soft key.
remove a check mark
Unmark soft key.
delete the marked
messages
Delete soft key.
Default Type: allows you to set the default
message type to Text, Fax, Email or Paging.
The network can convert the messages into the
selected format.
Default Validity: allows you to set the length of
time your text messages are stored in the
message centre while attempts are made to
deliver them.
Setting Name: allows you to give a name to the
setting group currently being defined.
(Menu 1.6)
When a confirming message displays, press the
Yes soft key to confirm.
Common Setting: The following options are
available:
Memory Status
Reply Path: allows the recipient of your message to
send you a reply through your message centre, if
your network supports this service.
This menu shows how many messages are
currently stored in the SIM, PHONE and CB (Cell
Broadcast) memories.
(Menu 1.7)
Delivery Reports: allows you to activate or
deactivate the report function. When this function
is activated, the network informs you whether or
not your message has been delivered.
Bearer Selection: allows you to choose either GSM
or GPRS, depending on your network.
86
87
Text Messages
Voice Mail
Text Messages
Broadcast
(Menu 1.8)
This menu allows you to access your voice
mailbox, if your network supports this service.
The following options are available:
Connect to Voice Server: before using the
Voice Mail feature, you must enter the voice
server number obtained from your service
provider; see menu 1.8.2. You can then select
this option and press the OK soft key to listen to
your messages.
You can quickly connect to the voice server by
pressing and holding the 1 key in Idle mode.
Voice Server Number: allows you to change
the voice mail server number, if necessary.
To
Press the
enter the server
number
corresponding
numeric keys.
correct a digit
C key.
move the cursor to
the left or right without
clearing the digit
Left and Right key.
save the number
OK key.
Note: Voice Mail is a network feature. Please
contact your service provider for further
details.
(Menu 1.9)
This network service allows you to receive text
messages on various topics, such as the weather
or traffic. Cell Broadcast (CB) messages display
as soon as they are received, provided that:
• the phone is in Idle mode.
• the Receive option is set to Enable.
• the message channel is currently active on the
channel list.
The following options are available:
Read: lets you view the received message. The
Volatile box displays the messages from the
network, but loses its contents as soon as the
phone is switched off. Scroll through the
message by using the Up and Down keys. While
reading a message, press the Save soft key to
store the message in the Archive box for later
retrieval.
Receive: allows you to enable or disable the
reception of broadcast messages.
Channel List: allows you to indicate the
channels from which you wish to receive
broadcast messages. The following options are
available:
Select: use to enable or disable channels on the
list by marking or unmarking them respectively.
A check mark displays in front of each selected
channel.
Add Channel: use to enter the ID and title for a
new channel.
Delete: use to remove a channel from the list.
Edit: use to change the ID and title of an
existing channel.
88
89
Text Messages
Language: allows you to select your preferred
language to display cell broadcast messages.
Please contact your service provider for further
details.
Multimedia Messages
Multimedia Message Service (MMS) is a messaging
service very similar to Short Message Service
(SMS). It provides automatic and immediate
delivery of personal multimedia messages from
phone to phone or from phone to e-mail.
In addition to the familiar text content of text
messages, multimedia messages can contain
images, graphics, voice and audio clips. An MMS
message is a multimedia presentation in a single
entry. It is not a text file with attachments.
Using the MMS feature, your phone can receive
and send messages that contain multimedia files,
such as your photos, sounds and images you
downloaded from the Internet and voice memos
you recorded. This function is available only if it is
supported by your service provider. Only phones
that offer multimedia message features can
receive and display multimedia messages.
Inbox
(Menu 2.1)
Viewing a Message When You Receive it
When a new multimedia message comes in, the
display shows the MMS Message icon ( ) and a
text notification along with the sender’s number.
1. Press the View soft key to view brief
information about the message, such as the
sender’s number, the message size and the
subject.
If you want to view the message later in the
Inbox, press the Exit soft key.
90
91
Multimedia Messages
Multimedia Messages
2. To scroll through the message information,
press the Up or Down key.
1. Select a message on the list and press the
Select soft key.
3. Press the Options soft key to use the
following options:
2. Press the OK soft key to go to the message
view screen.
• Retrieve: retrieves the message from the
MMS server.
• Delete: deletes the message.
• More Properties: shows you detailed
information about the message.
4. To read the message, press the Select soft
key when Retrieve is highlighted.
Your phone retrieves the message contents
from the server and displays it.
5. To scroll through the message, press the Up
or Down key.
6. When you are finished, press the
key.
Viewing a Received Message in the
Inbox
When you access the Inbox menu (Menu 2.1),
the list of multimedia messages you received
displays with the senders’ phone numbers, if
they are available in your Phone Book, or
subjects. The icons on the left tell you the status
of the messages.
•
: Messages that have been opened.
•
: Messages that are unopened.
92
Or, the display will automatically switch to the
screen.
3. To scroll through the message, press the Up
or Down key.
If the message has more than one page, you
can scroll through the pages by using the Left
and Right keys.
While viewing a message, you can choose the
Message options by pressing the Options soft
key.
If you are viewing a new message, the options
are the same as when you view a message as
soon as you receive it. See page 92.
When you are reviewing a message retrieved
from the MMS server, the following options are
available:
Delete: deletes the message.
Reply: allows you to reply to the sender by
sending a text or multimedia message.
Call Back: allows you to call the sender back.
Cut Address: allows you to extract the sender’s
number or e-mail address and URL, e-mail
addresses or phone numbers from the message
text.
93
Multimedia Messages
Forward: allows you to forward the message to
another person.
Save Picture: allows you to save an image from
the message into your phone. Images are stored
in the Images folder (Menu 9.5).
Save Sound: allows you to save a sound from
the message into the Sounds folder (Menu
9.4).
Multimedia Messages
2. Press the OK soft key to go to the message
view screen.
Or, the display will automatically switch to the
screen.
3. To scroll through the message, press the Up
or Down key.
If the message has more than one page, you
can scroll through the pages by using the Left
and Right keys.
Properties: shows you information about the
message, such as the subject, sender’s e-mail
address or phone number, message size,
recipient’s e-mail address or phone number,
priority and the time and date when the
message was received.
While viewing a message, you can choose the
following options by pressing the Options soft
key:
Outbox
Cut Address: allows you to extract the
destination number or e-mail address and URL,
e-mail addresses or phone numbers from the
message text.
(Menu 2.2)
When you access this menu, the list of the
multimedia messages you sent or saved
displays. The icons on the left tell you the status
of the messages.
•
: Messages currently being sent
•
: Messages sent
•
: Messages your phone couldn’t send
•
: Messages to be sent
•
: Messages deferred
Delete: deletes the message.
Send: allows you to send/resend the message.
Edit Message: allows you to change the
message contents, sound, picture or text.
Properties: shows you information about the
message, such as the status, subject, sender’s
e-mail address or phone number, message size,
and the time and date when the message was
sent.
1. Select a message on the list and press the
Select soft key.
94
95
Multimedia Messages
Draft
(Menu 2.3)
After creating a multimedia message, you can
store it in this message box to be sent later.
For further details about viewing a message, see
“Outbox” on page 94.
Write New
(Menu 2.4)
Multimedia Messages
• Add Picture: allows you to add a picture
stored in the Images folder (Menu 9.5).
Choose a picture and press the Select soft
key. You may not be able to add some
downloaded images if they are not in the
correct format.
• Add Sound: allows you to add a voice
memo. Select Record to record a new voice
memo. If you have voice memos recorded,
you can select Sound List to add one of
them.
This menu allows you to create a new
multimedia message and then send it to multiple
destinations.
• Send: allows you to send the message. Use
this option when you finish creating the
message.
Creating and Sending a Multimedia
Message
• Save: saves the message in the Draft
(Menu 2.3) or Templates (Menu 2.5) box
for later use. This option is activated after
you add content to the message.
1. Enter the subject of your message and press
the OK soft key.
For further details about entering characters,
see page 103.
2. When Add Here highlights, press the
Options soft key and add the message
contents using one of the following options:
• Add Text: enter the message text and
press the OK soft key.
• Add My Photo: allows you to add a photo
you took using the camera on your phone.
Select Take a Photo to take a new photo,
or Select a Photo to add one of the photos
stored in the phone. For further details
about using the camera, see page 110.
96
• Settings: allows you to change the
message settings. For further details about
each setting option, see page 103. After
changing the settings, you need to press
the
soft key or the C key to go to back
to the options screen.
• Add Destination: allows you to enter
destination numbers or addresses. See
steps 6 to 11. After adding them, you need
to press the
soft key or the C key to go
to back to the options screen.
• Preview: shows your message as it will
display on the recipient’s phone.
Note: You can add text, an image and a sound
once for each page.
97
Multimedia Messages
3. Repeat step 2 until you finish creating your
message.
4. If you want to change the added items, press
the Up or Down key to highlight one and
press the Options soft key.
Note: The options available are different,
depending on whether the item you select
on the message screen is text, an image,
a sound or the Page field.
The following options are available:
• Edit Text/Picture/Sound: allows you to
change the text or replace the image or
sound with another one.
• Add Page: allows you to add more pages.
After you add a page, the display shows
you the current page number and the
memory space used for the page. You can
move to each page using the Left or Right
key on the message screen.
• Delete: deletes the item from your
message.
• Duration: allows you to set when and how
long text, an image or a page displays on
the message presentation screen. If you set
a length of time shorter than the duration of
a content item for the page duration, the
content duration is automatically decreased.
• Send: allows you to send the message.
• Save: saves the message in the Draft
(Menu 2.3) or Templates (Menu 2.5) box
for later use.
98
Multimedia Messages
• Settings: allows you to change the
message settings. For further details about
each setting option, see page 102.
• Add Destination: allows you to enter
destination addresses. See steps 6 to 11.
• Preview: shows your message as it will
display on the recipient’s phone.
5. When you are finished creating the message,
choose Send from the options and press the
Select soft key.
6. Select a destination type, To, Cc or Bcc, and
press the Select soft key.
7. Choose one of the following options and press
the Select soft key:
• Phone Number: allows you to enter the
phone number you want.
• E-Mail: allows you to enter the e-mail
address of the recipient.
• Phone Book: allows you to retrieve a
number from your Phone Book.
8. Enter a number or an e-mail address, or
select a number from Phone Book.
9. When the correct number or address displays,
press the OK soft key.
10. To add a destination, press the Select soft
key when Add Destination highlights.
Repeat from step 7.
If you want to edit the destinations, select
one and press the Select soft key. You can
change or delete it.
99
Multimedia Messages
11. To enter additional numbers or addresses to
the other destination types, press the C key
or the
soft key and repeat steps 6
through 10.
You can enter up to 10 destinations each for
To, CC and Bcc.
12. When you are finished entering the
destinations, select Send Message and
press the Select soft key.
Multimedia Messages
Delete All
(Menu 2.6)
This menu allows you to delete all of the
multimedia messages in each message box. You
can also delete all of your messages at one time.
To
Press the
select a message box
to clear
Up or Down key. To
delete all of your
messages, select All
Messages.
place a check mark
Mark soft key.
remove a check mark
Unmark soft key.
delete the marked
messages
Delete soft key.
Your phone sends the message.
Templates
(Menu 2.5)
This menu stores messages you saved as
templates so that you can use them to make
new messages.
1. Scroll through the template list using the Up
or Down keys.
When a confirming message displays, press the
Yes soft key to confirm.
2. When the message template you want
highlights, press the Select soft key.
Memory Status
3. Press the OK soft key to use the following
options, or the display will automatically show
the options after a specified time:
You can check the amount of the memory being
used and the memory remaining for multimedia
messages.
• Edit Message: allows you to send a
message using the template. For further
details about how to send a message, see
page 103.
Each time you press the Next soft key, the
display shows the total space, including the used
and free space. It also shows how much space is
currently occupied by each message box.
(Menu 2.7)
• Delete: allows you to delete the message.
You are asked to confirm the deletion by
pressing the Yes soft key.
4. Press the
100
key to return to Idle mode.
101
Multimedia Messages
Setup
(Menu 2.8)
You can change the default settings for sending or
receiving multimedia messages.
The following options are available:
Delivery Report: when this option is enabled,
the network informs you whether or not your
message has been delivered.
Read Reply: when this option is enabled, your
phone sends a request for a reply along with your
message to the recipient.
Auto Download: you can set whether or not
your phone retrieves new incoming messages
from the MMS server without notifications. When
this option is enabled, the phone automatically
retrieves new messages from the server. As soon
as you receive a message, you can use more
options while you are reading. See page 93 for
further details about the options.
Message Acceptance: you can specify the
category of messages you want to receive.
Hide ID: when this option is enabled, your phone
number does not display on the recipient’s phone.
Expiry Date: you can select the length of time
your messages are stored in the message centre
after they are sent.
Delivery Time: you can set a delay time before
the phone sends your messages.
Priority: you can select the priority level of your
messages.
Multimedia Messages
Page Duration: you can set how long one page
of the sent message displays on the message
presentation screen. After a specified time, the
display automatically scrolls to the next page.
MMS Profile
(Menu 2.9)
In this menu, you can configure various network
settings that are required when you send or
receive multimedia messages.
Notes:
• The last profile you accessed is automatically
activated for sending messages.
• If you change the MMS settings without first
checking with your service provider, the MMS
feature may not work properly.
The following options are available for each
profile:
Profile Name: enter a name that you wish to
assign to the MMS server.
Connection URL: enter the address of your MMS
server.
Security: select a data transmission mode.
Choose Secure to protect your data against
unauthorised access; otherwise, choose NonSecure.
IP Address: enter the gateway address required
to connect to the MMS server.
User Name: enter the user ID required to
connect to the MMS server.
Report Allowed: when this option is enabled, the
sender of an incoming message receives a
delivery report from the network.
102
103
Multimedia Messages
Password: enter the password required to
connect to the MMS server.
APN: enter the access point name used for the
address of the MMS server.
For further details, contact your service provider.
Call Records
In this menu, you can view the:
• calls you missed, received or dialled.
• length of your calls.
• cost of your calls.
Notes:
• You can access the numbers in the three types of
call records by pressing the
key in Idle mode.
• The number of call records the phone can
store may be different depending on your SIM
card.
Missed Calls
(Menu 3.1)
This menu lets you view the last 20 numbers of
the calls you received, but did not answer.
The number or name, if available, display
together with the time and date when the call
was received.
By pressing the Options soft key, you can:
• edit the number, if available, and dial it or save
it in Phone Book.
• delete the call from the list.
You can also dial the number by pressing the
key.
104
105
Call Records
Call Records
Received Calls
(Menu 3.2)
This menu lets you view the last 20 numbers of
the calls you received.
The number or name, if available, display
together with the time and date when the call
was received.
Delete All
(Menu 3.4)
This menu allows you to delete all of the records
in each call record. You can also delete all of
your call records at one time.
To
Press the
By pressing the Options soft key, you can:
select a call record
to clear
• edit the number, if available, and dial it or save
it in Phone Book.
• delete the call from the list.
Up or Down key. To
delete all of your call
records, select All
Calls.
place a check mark
Mark soft key.
remove a check mark
Unmark soft key.
delete the marked
records
Delete soft key.
You can also dial the number by pressing the
key.
Dialled Calls
(Menu 3.3)
This menu lets you view the last 20 numbers
you dialled.
When a confirming message displays, press the
Yes soft key to confirm.
The number or name, if available, display
together with the time and date when the call
was made.
By pressing the Options soft key, you can:
• edit the number and dial it or save it in Phone
Book.
• delete the call from the list.
You can also dial the number by pressing the
key.
106
107
Call Records
Call Time
Call Records
(Menu 3.5)
This menu lets you view the timers for calls
made and received.
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, rounding-off for billing
purposes and so on.
The following options are available:
Last Call Time: length of the last call.
Total Sent: total length of all calls you made
since the timer was last reset.
Total Received: total length of all calls you
received since the timer was last reset.
Reset Timers: option used to reset the call
timers. You must first enter the phone password
and then press the OK soft key.
Note: The password is preset to “00000000” at the
factory. To change this password, see page
130.
Call Cost
(Menu 3.6)
This network feature lets you view the cost of
calls. This menu may not be available depending
on your SIM card.
The following options are available:
Last Call Cost: cost of the last call you made.
Total Cost: total cost of all calls you made since
the cost counter was last reset. If the total cost
exceeds the maximum cost set in the Set Max
Cost option, you can no longer make any calls
until you reset the counter.
Max Cost: maximum cost set in the Set Max
Cost option. See below.
Reset Counters: option used to reset the cost
counter. You must first enter your PIN2 (see
page 176) and then press the OK soft key.
Set Max Cost: option used to enter the
maximum cost that you authorise for your calls.
You must first enter your PIN2 (see page 176)
and then press the OK soft key.
Price/Unit: option used to set the cost of one
unit; this price per unit is applied when
calculating the cost of your calls. You must first
enter your PIN2 (see page 176) and then press
the OK soft key.
108
109
Camera
Camera
Using the camera module embedded in your
phone, you can take photos of people or events
while on the move. Additionally, you can send
photos to other people in a multimedia message
or set one as a wallpaper.
You can also record videos using the phone as a
camcorder.
Note: You can quickly access the Camera menu by
pressing the Camera key ( ) on the right
side of the phone in Idle mode.
CAUTION:
• Do not take photos of
permission.
• Do not take photos in
are not allowed.
• Do not take photos in
interfere with another
Take Photos
2. Adjust the image by aiming the camera at the
subject.
• Use the Left and Right keys to adjust the
brightness of the image.
• Use the Up and Down keys to zoom in or
out.
• Use the Volume keys on the left side of the
phone to flip the image vertically.
• Use the 1 key to quickly access the Take
Videos menu.
people without their
• Use the 2 key to set the image size.
a place where cameras
• Use the 3 key to select the image quality.
a place where you may
person’s privacy.
• Use the 4 key to set the Night Shot mode.
(Menu 4.1)
In this menu, you can take a photo. The camera
produces JPEG photos.
Note: When you take a photo in direct sunlight or
in bright conditions, shadow may appear on
the photo.
• To use the camera options, press the left
soft key. For details, see page 112.
3. Press the right soft key or Camera key to take
the photo.
4. Press the Save soft key.
To discard the photo and return to Capture
mode, press the Cancel soft key.
7. To
Press the
Taking a Photo withe the Folder Open
use the photo
options
1. Accessing the Take Photos menu turns on the
camera on the folder of the phone. Or you
can press and hold the Camera key ( ) on
the right side of the phone in Idle mode.
Options soft key. For
further details, see
page 112.
return to Capture
mode
Preview soft key or C
key.
The image to be captured appears on the
display.
110
return to Idle mode
keys.
111
Camera
Camera
When you press the Options soft key after
saving a photo, the following options are
available:
Send: allows you to send the photo using a
multimedia message. For further details, see
page 96.
Set as: allows you to set the image as your
wallpaper for the idle screen, an image to be
displayed when you turn the phone on or off, or
a caller ID image for Phone Book entries.
Rename: allows you to change the name of the
photo.
The following options are available:
Mode: allows you to take a photo in various
mode. Once you change the mode, its indicator
appears at the top left or centre of the display.
Normal Shot: allows you take a photo in the
normal mode.
Multi Shot: allows you to take a series of action
stills. Select the capture speed, High Speed or
Normal Speed, and the number of photos the
camera will take. When you press the Camera
key, the camera takes photos successively.
Go to My Photos: allows you to view the
photos you took in the My Photos menu (Menu
4.2).
After taking photos, press the SaveAll soft key
to save all of them or the Select soft key to
save the selected one(s).
Delete: deletes the photo.
Matrix Shot: allows you to take several stills and
save them in one frame. It will save as one
image consisting of the multiple stills taken.
Protection: allows you to protect the photo
from being deleted.
Properties: shows the properties of the photo,
such as the file name, file size, date and time it
was saved, resolution and quality.
Using the Camera options
In Capture mode, you can use various options
by pressing the left soft key.
To
Press the
scroll to an option
Up or Down key.
select the highlighted
option
Select soft key or the
Right key.
return to Capture
mode
112
Night Shot: allows you to take a photo of the
best quality when it is dark.
Effects: allows you to change the colour tone or
apply special effects to the photo.
Frames: allows you to use a decorated frame.
Select a frame from the list using the Navigation
keys.
Timer: allows you to have a delay time before
the camera takes a photo. Select the length of
time you want. When you press the Camera key,
the camera takes the photo after a specified
time.
soft key or C key.
113
Camera
Camera
Settings: allows you to change the default
settings for taking a photo.
My Photos
Photo Size: allows you to select a photo size.
This menu allows you to review your photos.
When you access this menu, your phone displays
them in Thumbnail mode, which shows photos
as small images.
Photo Quality: allows you to change the image
quality.
Shutter Sound: allows you to select a sound
when you press the shutter, the right soft key or
Camera key.
Default Name: allows you to change the default
prefix of the photo name.
Help: shows you the functions of the Navigation
keys for adjusting an image.
Taking a Photo with the Folder Closed
1. Close the folder.
2. To turn the camera on, press and hold the
Camera key on the right side of the phone.
The image to be captured appears on the
external display.
3. Adjust the image by aiming the camera at the
subject.
• Use the
key on the left side of the phone
to adjust the brightness of the image.
• Use the
key on the left side of the phone
to zoom in or out.
4. Press the Camera key to take the photo.
(Menu 4.2)
Scroll through the photos using the Navigation
keys. The
icon indicates that it contains the
photos taken in Muti-shot mode. The number in
the icon shows the number of the photos in the
current image folder. To view the photos on the
full screen, press the View soft key. In this
mode, you can scroll through the photos using
the Left and Right keys. To go back to Thumbnail
mode, press the Multi soft key.
Press the Options soft key to use the following
options:
Send: allows you to send the photo as a
multimedia message. For further details, see
page 86.
Set as: allows you to set the image as your
wallpaper for the idle screen or a caller ID image
for Phone Book entries.
Rename: allows you to change the name of the
photo.
Delete: deletes the photo.
Protection: allows you to protect the photo
from being deleted.
Properties: shows the properties of the photo,
such as the file name, file size, time and date it
was saved, photo size, quality and protection
status.
The photo is automatically saved in the My
Photos menu (Menu 4.2).
114
115
Camera
Take Videos
Camera
(Menu 4.3)
My Videos
(Menu 4.4)
You can record a video that is currently displayed
on the camera screen and save it as an MPEG
file.
When you access this menu, the thumbnail
images of the videos display.
Recording a Video
1. Press the Navigation keys to scroll to the
video you want to view.
1. When the camera turns on, adjust the image
by aiming the camera at the subject.
• Use the Left and Right keys to to adjust the
brightness of the image.
• Use the Up and Down keys to zoom in or out.
• Use the Volume keys on the left side of the
phone to flip the image vertically.
• Use the 1 key to quickly access the Take
Photos menu.
To play a video:
2. Press the Play soft key to start playing the
video.
3. To
pause the playing
Pause soft key.
resume
Continue soft key.
stop
Stop soft key or C
key.
2. Press the left soft key to start recording.
3. When you are finished, press the left soft key.
The phone automatically stops when the
recording time expires. You can cancel your
recording by pressing the right soft key.
4. Press the Save soft key.
The video is saved and the display returns to
Record mode.
Press the
return to Idle mode
key.
Press the Options soft key to use the following
options:
Rename: allows you to change the file name.
Delete: deletes the current video file.
Protection: allows you to protect the video
from being deleted.
Properties: show the properties of the video
file, such as the time and date it was saved, file
size, protection status and playing time.
116
117
Camera
Delete All
Sound Settings
(Menu 4.5)
This menu allows you to delete all of your photos
or videos. You can also delete all of them at one
time.
To
Press the
select an item to clear
Up or Down key. To
delete all of contents,
select All.
place a check mark
Mark soft key.
remove a check mark
Unmark soft key.
delete the marked
items
Delete soft key.
(Menu 4.6)
You can check the amount of the memory being
used and the memory remaining in the camera.
Each time you press the Next soft key, the
display shows the total, free and used space for
photos and videos.
118
• ring melody, volume and type.
• sounds made when you press a key, receive a
message, open/close the folder or switch your
phone on or off.
• alert tone made every minute during a call,
when you make an error or when your call is
connected to the system.
Note: When the phone is in Silent mode (see page
31), you cannot change the sound settings.
Ring Tone
(Menu 5.1)
This menu allows you to select a ring melody.
When a confirming message displays, press the
Yes soft key to confirm.
Memory Status
You can use the Sound Settings feature to
customise various settings, such as the:
You can choose between many different
melodies. If you have downloaded sounds from
the Internet or optional EasyGPRS programme,
you can use them in this menu.
Ring Volume
(Menu 5.2)
This menu allows you to adjust the ring volume
to one of five levels.
Use the Up and Down keys or the Volume keys
on the left side of the phone to increase or
decrease the volume.
119
Sound Settings
Alert Type
Sound Settings
(Menu 5.3)
This menu allows you to specify how you are to
be informed of incoming calls or alarms you set.
The following options are available:
Light Only: the service light flashes; the phone
neither rings nor vibrates.
Melody: the phone rings using the selected ring
tone or Alarm Tone.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three
times and then starts ringing.
Message Tone
(Menu 5.5)
This menu allows you to select how the phone
informs you that a new message has been
received.
SMS Tone (Menu 5.5.1)
The following options are available for alerting
you to new SMS messages:
Off: the phone does not use an SMS tone.
Light Only: the service light flashes.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
Keypad Tone
(Menu 5.4)
This menu allows you to select the tone that the
phone sounds when you press a key.
To turn the sound off, select Off.
SMS Tone x: the phone uses one of several
SMS tones.
SMS-CB Tone (Menu 5.5.2)
The following options are available for alerting
you to new cell broadcast (CB) messages:
Off: the phone does not use a CB tone.
Light Only: the service light flashes.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
SMS-CB Tone x: the phone uses one of several
CB tones.
120
121
Sound Settings
Sound Settings
MMS Tone (Menu 5.5.3)
The following options are available for alerting
you to new MMS messages:
Off: the phone does not use an MMS tone.
Light Only: the service light flashes.
Alerts On Call
(Menu 5.8)
This menu allows you to set whether or not the
phone informs you when you receive a new
message or when the alarm time expires during
a call.
Vibration: the phone vibrates.
Off: The phone alerts you after ending a call.
Single Beep: the phone beeps once.
On: The phone alerts you during a call.
MMS Tone x: the phone uses one of several
MMS tones.
Folder Tone
(Menu 5.6)
Extra Tones
(Menu 5.9)
You can customise additional tones used for the
phone.
This menu allows you to select the tone that the
phone sounds when you open or close the folder.
To turn a
given tone
Press the
To turn the sound off, select Off.
on
On soft key.
A check mark displays in
front of the option.
Power On/Off
off
Off soft key again. The
check mark no longer
displays.
(Menu 5.7)
This menu allows you to select the melody that
the phone sounds when it is switched on or off.
To turn the sound off, select Off.
The following options are available:
Error Tone: sets whether or not the phone
informs you when you make a mistake.
Minute Minder: sets whether or not the phone
beeps every minute during an outgoing call to
keep you informed of the length of your call.
Connect Tone: sets whether or not your phone
beeps when your call is connected to the
system.
122
123
Phone Settings
Phone Settings
Many different features of your phone can be
customised to suit your preferences. All of these
features are accessed in the Phone Settings
menu.
Infrared Activate
Display Settings
(Menu 6.2)
In this menu, you can change various settings
for the display or backlight.
Wallpaper (Menu 6.2.1)
(Menu 6.1)
This feature allows you to send or receive data
through the infrared port. To use an infrared
connection, you must:
This menu allows you to change the background
image or the colour of the text to be displayed in
Idle mode.
The following options are available:
• configure and activate an IrDA-compliant
infrared port on your PC.
Wallpaper List: you can select a background
image to be displayed on the idle screen.
• activate the infrared feature on the phone; the
IrDA icon (
) appears on the top line of the
display.
To change the background image:
• align the IrDA port on the phone with the IrDA
port on your computer or another phone.
IrDA port
IrDA port
The connection is ready for data transmission.
If there is no communication between your
phone and the IrDA-compliant device within 30
seconds of activating the feature, it is
automatically deactivated.
Note: For optional performance, use an optional
data link cable. you can purchase one from
your local Samsung dealer.
124
1. Scroll through the list by pressing the Up or
Down key.
You have various preset images available. You
can also select a blank background or any
images downloaded from the Internet and
optional EasyGPRS programme or received in
messages. Once you have set a photo as the
wallpaper, it displays as My Photo on this
list.
2. Press the Select soft key when the image you
want highlights.
3. When the image displays, press the Select
soft key to display it on the idle screen.
Text Display: you can specify whether or not
the phone displays the time and date on the idle
screen.
Text Color: you can select the colour of the text
to be displayed on the idle screen.
125
Phone Settings
Phone Settings
Front LCD (Menu 6.2.2)
Graphic Logo (Menu 6.2.6)
This menu allows you to select a colour of the
default image to be displayed on the external
display.
This menu allows you to display your service
provider’s logo instead of its name.
Menu Style (Menu 6.2.3)
On: the service provider’s logo stored in your
phone displays in Idle mode; if no logo has been
stored, the service provider’s name displays.
This menu allows you to select the menu display
style. You can choose either Bar Style or Page
Style.
Off: the service provider’s name displays in Idle
mode.
Greeting Message
(Menu 6.3)
Back Light (Menu 6.2.4)
You can select the length of time the backlight is
on. The backlight turns on when you press a key
open the folder or receive a call or message and
remains on for the specified length of time.
Service Light (Menu 6.2.5)
This menu allows you to select whether or not
the service light is used. It also allows you to
select a colour in which it flashes.
Select one of the seven colour settings. When
the phone is ready for use, the service light
flashes in the chosen colour.
If you do not wish to use the service light, select
Off.
126
This menu allows you to set a greeting to be
displayed briefly when the phone is switched on.
To
Press the
clear the existing
message
C key and hold it down
until the message is
cleared.
enter a new
message
appropriate alphanumeric
keys.
change the text
input mode
right soft key.
For further details about how to enter
characters, see page 103.
127
Phone Settings
Phone Settings
Own Number
(Menu 6.4)
This function is a memory aid, which you can
use to check your own phone numbers if you
need to do so.
You can:
• assign a name to each of your own phone
numbers registered on your SIM card.
• edit the names and numbers.
Any changes made here do not in any way affect
the actual subscriber numbers on your SIM card.
Language
(Menu 6.5)
You can select a display language. English,
Chinese S (Simplified Chinese), Chinese T
(Traditional Chinese) are available.
Security
(Menu 6.6)
PIN Check (Menu 6.6.1)
When the PIN Check feature is enabled, you
must enter your PIN each time you switch the
phone on. Consequently, any person who does
not have your PIN cannot use your phone
without your approval.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
The following options are available:
Disable: the phone connects directly to the
network when you switch it on.
Enable: you must enter the PIN each time the
phone is switched on.
Change PIN (Menu 6.6.2)
This feature allows you to change your current
PIN to a new one, provided that the PIN Check
feature is enabled. You must enter the current
PIN before you can specify a new one.
The Security feature enables you to restrict the
use of your phone to others and the types of
calls.
Once you have entered a new PIN, you are
asked to confirm it by entering it again.
Various codes and passwords are used to protect
the features of your phone. They are described
in the following sections. Also see pages 173176.
Phone Lock (Menu 6.6.3)
When the Phone Lock feature is enabled, the
phone is locked and you must enter an 8-digit
phone password each time the phone is switched
on.
The password is preset to “00000000” at the
factory. To change the phone password, see the
Change Password menu (Menu 6.6.4).
128
129
Phone Settings
Once the correct password has been entered,
you can use the phone until you switch it off.
The following options are available:
Disable: you are not asked to enter the phone
password when you switch the phone on.
Enable: you are required to enter the phone
password when you switch the phone on.
Change Password (Menu 6.6.4)
The Change Password feature allows you to
change your current phone password to a new
one. You must enter the current password before
you can specify a new one.
The password is preset to “00000000” at the
factory. Once you have entered a new password,
you are asked to confirm it by entering it again.
SIM Lock (Menu 6.6.5)
When the SIM Lock feature is enabled, your
phone only works with the current SIM. You
must enter the SIM lock code to use a different
SIM card.
Once you have entered the lock code, you are
asked to confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock
code.
Phone Settings
Privacy (Menu 6.6.6)
Using this menu, you can lock your contents,
such as multimedia and e-mail messages,
photos, videos, voice memos, downloaded
images and sounds. Once you have locked
contents, you must enter the phone password to
access the associated menus.
To
Press the
select an item to lock
Up or Down key. To
lock all of your
contents, select All.
place a check mark
Mark soft key.
remove a check mark
Unmark soft key.
lock the marked items
OK soft key.
When the phone asks for the phone password,
enter the password and press the OK soft key.
Note: The password is preset to “00000000” at the
factory. To change this password, see page
130.
FDN Mode (Menu 6.6.7)
FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your
outgoing calls to a limited set of phone numbers.
The following options are available:
Disable: you can call any number.
Enable: you can only call phone numbers stored
in Phone Book. You must enter your PIN2.
130
131
Phone Settings
Phone Settings
Note: Not all SIM cards have a PIN2. If your SIM
card does not, this menu does not display.
Active Folder: when this option is checked, you
can simply slide the folder up to answer a call.
Change PIN2 (Menu 6.6.8)
When it is unchecked, you must press a key to
answer a call, depending on the setting of the
Anykey Answer option. See below.
The Change PIN2 feature allows you to change
your current PIN2 to a new one. You must enter
the current PIN2 before you can specify a new
one.
Once you have entered a new PIN2, you are
asked to confirm it by entering it again.
Anykey Answer: when this option is checked,
you can answer an incoming call by pressing any
key, except the
key and the Reject soft
key. To reject the call, press the
key or the
Reject soft key.
Note: Not all SIM cards have a PIN2. If your SIM
card does not, this menu dose not display.
When this option is unchecked, you can only
press the
key or Accept soft key.
Extra Settings
Short Cut
(Menu 6.7)
(Menu 6.8)
You can turn the automatic redialling or
answering features on or off.
The Navigation keys can be used as shortcut
keys. In Idle mode, they allow you to access
specific menus directly.
To turn a
feature
Press the
on
Mark soft key.
A check mark displays in
front of the option.
The Left and Right keys are fixed as a shortcut
to the Text Messages menu and the Voice
Memo menu. In this menu, you can change the
shortcuts assigned to the Up and Down keys.
off
Unmark soft key. The check
mark no longer displays.
The following options are available:
Auto Redial: when this option is checked, the
phone makes up to ten attempts to redial a
phone number after an unsuccessful call.
Note: The interval between two attempts varies.
132
To assign a shortcut to a key:
1. Select the key to be used as a shortcut key
by pressing the Up or Down key and press the
Select soft key.
2. Select the menu to be assigned to the key by
pressing the Up or Down key.
Note: To deactivate a shortcut key, select the
None option.
3. Press the Select soft key to save the selection.
133
Phone Settings
Reset Settings
Organiser
(Menu 6.9)
You can easily reset your phone to its default
settings. To reset your phone:
1. Select the Reset Settings menu.
2. Enter the 8-digit phone password and press
the OK soft key.
Note: The password is preset to “00000000” at the
factory. To change this password, refer to
page 130.
The Organiser feature enables you to:
• set an alarm so that the phone rings at a
specific time, such as to remind you of an
appointment.
• view the calendar and organise your schedule.
• set the current time and date.
• define a list of things to do.
• record voice memos.
• use the phone as a calculator for basic
mathematical equations or currency exchange
operations.
Alarm
(Menu 7.1)
This feature allows you to:
• set the alarm to ring at a specific time.
• set the phone to switch on automatically and
ring the alarm even if the phone is switched
off.
The following options are available:
Once Alarm: the alarm rings only once and is
then deactivated.
Daily Alarm: the alarm rings every day at the
same time.
Morning Call: the alarm rings to wake you up
in the morning.
134
135
Organiser
To set an alarm:
1. Choose the type of alarm to be set and press
the Select soft key.
2. Enter the time for the alarm to sound.
Note: Your phone is preset to use 12-hour
format. To change the format, see page
140.
If you want to use the alarm options, press
the Options soft key. The following options
are available:
• Remove Alarm: deactivates the current
alarm.
• Alarm Tone: allows you to select the
Alarm Tone.
3. Press the OK soft key.
4. Select AM or PM and press the Select soft
key.
5. If you select Morning Call in step 1, choose
the repeat option, Monday to Friday or
Monday to Saturday, and press the Select
soft key.
To stop the alarm when it rings, press one of the
volume keys or press the Exit soft key.
Remove Alarm: deactivates all alarm settings.
Autopower: when this option is set to Enable,
the alarm rings at the specified time even if the
phone is switched off.
If the menu is set to Disable and the phone is
switched off at the specified time, the alarm
does not ring.
136
Organiser
Calendar
(Menu 7.2)
With the Calendar feature, you can:
• consult the calendar to check your memos.
• write memos to keep track of your schedule.
• set an alarm to act as a reminder.
Consulting the Calendar
When you select the Calendar menu (Menu
7.2), the calendar displays. The following
options are available when you press the
Options soft key:
Search All: displays all of the memos, starting
with the oldest regardless of the day. To scroll
through the memos, press the Left or Right key.
Delete All: allows you to delete all of the
memos. You are asked to confirm your action.
Go to Date: allows you to go to a specific date.
Exit: exits the Calendar feature and returns to
Idle mode.
Writing a Memo
You can make up to 30 memos for one day. To
write or edit a memo on a specific date:
1. Select a date on the calendar, using the
Navigation keys.
Note: To skip to the previous or next month,
press the Volume keys on the left side of
the phone.
137
Organiser
2. Press the Select soft key.
An empty memo screen displays allowing you
to enter your memo.
3. Enter your memo and then press the OK soft
key.
Note: For further details about how to enter
characters, see page 46.
You are asked if you wish to set an alarm.
4. If you want the alarm to ring on the chosen
day, press the Yes soft key.
Otherwise, press the No soft key.
5. If you pressed the Yes soft key, set the time
for the alarm and press the OK soft key.
Note: Your phone is preset to use 12-hour
format. To change the format, see page
140.
You can set the melody for the alarm by
pressing the Melody soft key.
6. Select AM or PM and press the Select soft
key.
The colour of the date on the calendar changes
to green to indicate that a memo exists for that
date.
Viewing a Memo
When you select a day for which a memo
already exists on the calendar, the latest memo
for the day displays.
Organiser
Press the New soft key to add a new memo for
the day.
You can use the following options by pressing
the Options soft key:
Edit: allows you to change the memo text.
Alarm: allows you to set an alarm to ring at a
specified time to remind you of the memo. If
you set the alarm earlier, you can change or
delete it.
Delete: allows you to delete the memo.
Copy to: allows you to copy the memo to
another date.
Move to: allows you to change the date of the
memo.
Time & Date
(Menu 7.3)
This menu allows you to change the current time
and date displayed. You can also find out what
time it is in another part of the world.
The following options are available:
Set Time: allows you to enter the current time.
You can choose the time format in the Time
Format menu (Menu 7.3.4).
Note: Before setting the time, you must specify
your time zone in the World Time menu
(Menu 7.3.3). See the following page.
If more than one memo is stored, press the Up
or Down key to scroll to the previous or next
memo.
138
139
Organiser
Set Date: allows you to enter the day, month
and year.
Calculator
World Time: allows you to find out what time it
is in another part of the world, using the Left
and Right keys.
With this feature, you can use the phone as a
calculator. The calculator provides basic
arithmetic functions; addition, subtraction,
multiplication and division.
The screen shows the:
• city name.
• current time and date.
• time difference between the selected city and
your city if you have set the local time (see
below for further details).
To select your time zone:
1. Select the city corresponding to your time
zone by pressing the Left or Right key one or
more times.
The local date and time display.
2. Press the Set soft key.
Time Format: allows you to change the time
format to 24 Hours or 12 Hours.
Date Format: allows you to change the date
format.
140
Organiser
(Menu 7.4)
1. Enter the first number using the numeric
keys.
Notes:
• To delete mistakes or clear the display, press
the C key.
• To include a decimal point or a bracket, press
the left soft key until the symbol you want
displays.
2. Press the right soft key until the required
arithmetic symbol appears: + (addition),
- (subtraction),
(multiplication), /
(division).
3. Enter the second number.
4. To view the result, press the
key.
5. Repeat steps 1 to 4 as many times as
required.
141
Organiser
To Do List
Organiser
(Menu 7.5)
This feature allows you to:
• enter a list of tasks to be done.
• assign a priority and a deadline to each task.
• sort the tasks by priority and status mark.
Creating the To Do List
1. Press the New soft key.
The following options are available:
Action
Procedure
View the
details for a
specific task
➀ Highlight the task.
➁ Press the View soft key.
➂ Scroll through the tasks
using the Up and Down
keys, if necessary.
Change the
status of a
specific task
➀ Highlight the task.
➁ Press the
key to mark
the task as completed as of
the current time and date.
or
➀ Highlight the task.
➁ Press the Options soft
key.
➂ Select the Mark option.
➃ Select the appropriate status
(Done or Undo).
Create a new
➀ Press the Options soft key.
➁ Select the New option.
➂ Enter the text, priority
and/or deadline for the task.
Edit an existing
task
➀ Highlight the task.
➁ Press the Options soft key.
➂ Select the Edit option.
➃ Change the text, priority
and/or deadline for the task.
Sort the existing
tasks by priority
or status
➀ Press the Options soft
key.
➁ Select the Sort option.
➂ Select the sort criterion
(High, Low, Done or
Undo).
2. Enter the first task.
Note: For further details about how to enter
characters, see page 46.
3. Press the OK soft key.
4. Select a priority status of high, normal or low
using the Up and Down keys and press the
Select soft key.
5. Enter your deadline and press the OK soft
key.
If you do not want to set a deadline, press
the Skip soft key.
Editing the To Do List
When you select the To Do List menu (Menu
7.5), the current contents display with the
status mark, if the task has been done, and
priority;
for High,
for Normal and
for
Low.
142
143
Organiser
Organiser
Voice Memo
Action
Procedure
Copy a task
➀ Highlight the task.
➁ Press the Options soft
key.
➂ Select the Copy option.
➃ Change the text, priority
and deadline for the task.
Copy a task to
the calendar
Delete a task
Delete all tasks
Exit the
To Do list
➀ Highlight the task.
➁ Press the Options soft
key.
➂ Select the Copy to
Calendar option.
➃ Change the text and
deadline for the task and
set the alarm.
➀ Highlight the task.
➁ Press the Options soft
key.
➂ Select the Delete option.
➀ Press the Options soft
key.
➁ Select the Delete All
option.
➂ Confirm the deletion by
pressing the OK soft key.
➀ Press the Options soft
key.
➁ Select the Exit option.
(Menu 7.6)
You can record voice memos. After recording, you
can send a memo to other people using the
Multimedia Message Service.
Note: you can quickly enter the Voice Memo menu
by pressing the Right key in Idle mode.
Record (Menu 7.6.1)
This menu allows you to record a new memo.
When you select this menu, the display shows the
30-second timer.
Note: You can quickly enter this menu by pressing
and holding the Right soft key.
1. To start recording, press the Record soft key.
2. Record a memo by speaking into the
microphone.
3. When you press the Stop soft key, if or the
recording time expires, the following options
display:
• Replay: plays back your memo.
• Re-record: discards the memo and enables
you to record another one.
• Save: allows you to save the memo.
• Quit: cancels your recording and exits the
Record menu.
4. To save the memo, choose Save from the
options and press the Select soft key.
5. Press the C key to clear the default name, if
necessary, and enter a name for the memo.
For further details about how to enter
characters, see page 46.
144
145
Organiser
Organiser
Delete All (Menu 7.6.3)
6. Press the OK soft key.
The memo is saved and then the display
shows the memo information.
7. Press the Options soft key to use the
following memo options:
• Send: allows you to send the memo to
other people by using the MMS feature.
Follow the procedure on page 96.
• Rename: allows you to change the memo’s
name.
• Delete: deletes the memo.
8. To exit, press the C or
When the confirming message appears, press
the Yes soft key. To cancel the deletion, press
the No soft key.
Memory Status (Menu 7.6.4)
You can check the number of voice memos.
The display shows the number of memos you
recorded.
key.
Memo List (Menu 7.6.2)
Currency Exchange
This menu shows your voice memo list. Scroll to
a memo and press the Options soft key. The
following options are available:
Using this menu, you can figure out currency
conversions.
Play: plays the memo.
1. Enter the current exchange rate of your
source currency and press the OK soft key.
Send: allows you to send the memo to other
people by using the MMS feature. See page 96
for further details about sending a message.
Rename: allows you to change the memo’s
name.
Properties: displays information about the
memo, such as the name, date when the memo
was made, recording duration and memory size.
Delete: deletes the memo.
146
In this menu, you can delete all of your voice
memos.
(Menu 7.7)
You can insert a decimal point by pressing the
key.
2. Enter the amount to convert and press the
OK soft key.
The amount you entered and its equivalent
value display.
3. Press the Exit soft key to exit the currency
convertor.
147
Network Services
Network Services
These menu functions are network services.
Please contact your service provider to check
their availability and subscribe to them, if you
wish.
Call Diverting
(Menu 8.1)
This network service enables incoming calls to
be rerouted to a number that you specify.
Example: You may wish to divert your business
calls to a colleague while you are on
holidays.
To set your call diverting options:
1. Select a call diverting option by pressing the
Up or Down key, and then press the Select
soft key.
2. Select the type of calls, voice or data, by
pressing the Up or Down key, and then press
the Select soft key.
The current status displays. If the option has
already been set, the number to which the
calls are diverted displays.
3. To
Press the
activate call
diverting
Activate soft key.
Go to step 4.
Divert Always: all calls are diverted.
change the number
to be called
Change soft key.
Go to step 4.
Busy: calls are diverted when you are already
on another call.
deactivate call
diverting
Remove soft key.
You can use the following options to divert voice
calls and/or data calls:
No Reply: calls are diverted when you do not
answer the phone.
Unreachable: calls are diverted when you are
not in an area covered by your service provider.
Cancel All: all call diverting options are
cancelled.
4. Enter the number to which the calls are to be
diverted and press the OK soft key.
To enter an international code, press the 0
key until the + sign displays.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can deactivate all call diverting settings by
selecting the Cancel All option.
148
149
Network Services
Call Barring
Network Services
(Menu 8.2)
The call barring network service allows you to
restrict your calls.
You can use the following options to restrict
voice calls and/or data calls:
All Outgoing: calls cannot be made.
International: international calls cannot be
made.
International Except to Home: when abroad,
calls can be made only to numbers within the
current country and to your home country, which
is the country where your home network
provider is located.
All Incoming: calls cannot be received.
Incoming While Abroad: calls cannot be
received when you are using your phone outside
of your home service area.
Cancel All: all call barring settings are
deactivated; calls can be made and received
normally.
To set your call barring options:
1. Select a call barring option by pressing the Up
or Down key, and then press the Select soft
key.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement displays.
To deactivate specific call barring settings:
1. Select the call barring option to be
deactivated.
2. Select the type of call to which this option
applies.
3. Press the Deactivate soft key.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can also deactivate all call barring settings
by selecting the Cancel All option.
Change Barring Password: you can set and
change the call barring password obtained from
your service provider using this option. You must
enter the current password before you can
specify a new one.
Once you have entered a new password, you are
asked to confirm it by entering it again.
2. Select the type of calls, voice or data, by
pressing the Up or Down key, and then press
the Select soft key.
3. Press the Activate soft key to confirm your
settings.
150
151
Network Services
Call Waiting
Network Services
(Menu 8.3)
This network service informs you when someone
is trying to reach you during another call.
You can specify individual call waiting options for
voice calls and/or data calls.
To set your call waiting options:
1. Select the type of calls to which you want to
apply the call waiting option by pressing the
Up or Down key, and then press the Select
soft key.
The screen informs you whether call waiting
is activated or deactivated.
2. You can activate or deactivate the call waiting
feature as necessary by using the Activate or
Deactivate soft key respectively.
To return to the previous screen, press the
Exit soft key.
You can also deactivate all call waiting settings
by selecting the Cancel All option.
Network Selection
(Menu 8.4)
The Network Selection feature enables you to
automatically or manually select the network
used when roaming outside of your home area.
Note: You can select a network other than your
home network only if there is a valid
roaming agreement between them.
To automatically or manually select the network
when roaming:
1. When Network Selection displays, press the
Select soft key.
2. Press the Up or Down key until the
appropriate option highlights and then press
the OK soft key.
If you select Automatic, you are connected
to the first available network when roaming.
If you select Manual, the phone scans for the
available networks. Go to step 3.
3. Press the Up or Down key until the network
you want highlights and then press the OK
soft key.
You are connected to that network.
152
153
Network Services
Caller ID
Network Services
(Menu 8.5)
You can prevent your phone number from being
displayed on the phone of the person being
called.
Note: Some networks do not allow the user to
change this setting.
The following options are available:
Default: the default setting provided by the
network is used.
Hide Number: your number does not display on
the other person’s phone.
Send Number: your number is sent each time
you make a call.
Closed User Group (CUG)
(Menu 8.6)
This network service allows incoming and
outgoing calls to be restricted to a selected user
group. You can create up to ten user groups.
For details about how to create and use a closed
user group, contact your service provider.
Example: A company lends SIM cards to its
employees and wants to restrict
outgoing calls to members of the same
team.
Activating a Closed User Group
If you select the Closed User Group menu, you
can enter the CUG function. You can now access
the following options after pressing the Select
soft key:
154
Index List: lets you list, add or delete CUG
index numbers. The list of current CUG indexes
appears. Add a new CUG index as advised by
your service provider or delete a group.
To
Press the
scroll through
the existing
CUG indexes
Up or Down key.
add a new CUG
index
Options soft key, select the
Add option and enter the
index.
delete a CUG
index
Options soft key and select
the Delete option.
activate a CUG
index
Options soft key and select
the Activate option.
Outside Access: lets you enable or disable calls
to numbers other than those in the Closed User
Group. This feature depends on the nature of
your CUG subscription. Please check with your
service provider.
Default Group: you may set a default CUG with
your service provider. If you have done so, you
can enable the Default Group option on your
phone. When making a call, you are given the
option of using your default CUG, instead of
selecting one from the list.
Deactivate: deactivates the CUG function. This
menu appears only when the default group is
enabled or a CUG index is selected.
155
Network Services
Band Selection
Funbox
(Menu 8.7)
For the phone to make and receive phone calls,
it must register with one of the available
networks. Your phone can handle any of the
following types of networks:
• Combined GSM 900/1800
• GSM 1900
The country where you purchased your phone
determines the default band that it uses. When
you travel abroad, you must remember to
change to an appropriate band.
1. When Band Selection displays, press the
Select soft key.
2. Press the Up or Down key until the
appropriate option highlights and press the
OK soft key.
3. When the display confirms the network band
you selected, press the Yes soft key.
To cancel the selection, press the No soft key.
When you select a new band, your phone
displays a confirmation message and then
automatically searches for all of the available
networks. Your phone registers with a preferred
network within the band.
The Funbox menu contains several fun options.
WAP Browser
(Menu 9.1)
Your phone is equipped with a WAP (Wireless
Application Protocol) browser to allow you to
access and navigate the Wireless Web using your
phone.
Home (Menu 9.1.1)
Selecting this menu connects the phone to the
network and loads the homepage of the Wireless
Web service provider. You can also press the
key in Idle mode.
The contents of the WAP Browser startup
homepage depends on your Wireless Web
service provider. To scroll through the screen,
use the Up or Down keys.
Note: To access the startup homepage from any
other screen in the WAP browser, use the
Home option. For further details about the
WAP Browser menus, see page 159.
Exiting the WAP Browser
To exit the browser at any time, simply press the
key.
156
157
Funbox
Funbox
Navigating the WAP Browser
Selecting and Using Browser Menu Options
To
Press the
scroll through
and select browser
items
Up or Down key until the
symbol
points to the
item,and then press the
Select soft key to confirm
the selection.
Various menu options are available when you are
using the WAP Browser to navigate the Wireless
Web.
return to the
previous page
Back soft key or the C
key.
return to the
startup homepage
key for more than 2
seconds and select the
Home option. For further
details about this option,
see page 159.
Note:
You can download a content, such as java MIDlets,
sounds, or images, while navigation the WAP
browser. If the corresponding memory of your
phone is full, a warning message appears. Free up
the memory, and retry saving.
You can listen to a sound before downloading it,
even if your phone is in Silent mode.
Entering Text in the WAP Browser
When you are prompted to enter text, the
current text input mode is indicated on the
screen. To change the text input mode, press
the
key one or more times.
To access a menu option:
1. Press and hold the
key.
A menu list displays.
2. Highlight a menu by pressing the Up or Down
key.
3. Select an option by pressing the Select soft
key.
4. If necessary, select a secondary option using
the Up and Down keys, and press the Select
soft key to confirm.
Note: The menus may vary, depending on your
version of the WAP browser.
The following options are available:
Reload: reloads the current page.
Home: takes you back at any time to the home
page of the Wireless Web service provider.
Goto URL: allows you to manually enter the
URL address of a Web page. After entering an
address, press the OK soft key to go there
directly.
Show URL: displays the URL address of the
Web page to which you are currently connected
to. It also enables you to set the current site as
the startup home page.
For further details about the text input modes,
see page 47.
158
159
Funbox
Funbox
To
Press the
set the current
page as your
startup home page
Option soft key and
select the Save to Home
option.
set a bookmark
for the current
page
Option soft key and
select the Save to
Bookmark option.
cancel your setting
Back soft key.
Edit Home: allows you to change the startup
home page manually. Enter the URL and press
the OK soft key. For further details about
entering text, see page 46.
Clear Cache: deletes the information stored in
the cache, which stores the most recently
accessed Web pages.
Inbox: allows you to read messages received
from the web server.
Favorite (Menu 9.1.2)
This menu allows you to store the URL addresses
of up to ten of your favourite web sites. You can
access this menu directly by pressing and
holding the
key while using the WAP browser.
To store a URL address:
1. Select an empty location and press the Select
soft key.
2. Enter the address and press the Enter soft
key.
3. Enter a name for the favourite item and press
the Enter soft key.
After saving favourite items, you can use the
following options by pressing the Select soft
key:
Goto URL: quickly takes you to the site.
Edit: allows you to edit the address and name.
Delete: delete the address.
http:// (Menu 9.1.3)
This menu allows you to manually enter the URL
address of the Web site that you wish to access.
For further details about how to enter
characters, see page 46.
Settings (Menu 9.1.4)
This menu allows you to set up five proxy
servers for the WAP browser. Contact your
service provider for details about your Settings
options.
For each server, the following options are
available:
Profile Name: enter a name that you wish to
assign to the HTTP server.
Homepage URL: set the address of your
startup homepage. When the default homepage
displays, you can delete it using the C key and
enter your own choice.
For further details about how to enter
characters, see page 46.
160
161
Network Services
Security: select a data transmission mode.
Choose Secure to protect your data against
unauthorised access; otherwise, choose NonSecure.
Bearer: select a bearer to be used for each type
of network address accessed; GPRS or Data.
The remaining options depend on the Bearer
setting.
Clear Cache (Menu 9.1.5)
You can clear the information stored in the
cache, the phone’s temporary memory which
stores the most recently accessed Web pages.
Press the Yes soft key to confirm the deletion.
Otherwise, press the No soft key.
When the bearer is set to GPRS:
Push Message (Menu 9.1.6)
IP Address: enter the WAP gateway address
required to connect to the Internet.
In this menu, you can receive and access web
messages from the server.
User Name: enter the User ID required to
connect to the GPRS network.
The following options are available:
Password: enter the password required to
connect to the GPRS network.
Inbox: allows you to read the messages
received from the web server.
APN: enter the access point name used for the
address of the GPRS network gateway.
Receive: allows you to set whether or not your
phone receives web messages.
When the bearer is set to Data:
Delete All: allows you to delete all of the web
messages.
IP Address: enter the WAP gateway address
required to connect to the Internet.
Login Name: enter the PPP server login ID.
Password: enter the PPP server password.
Dial-up Number: enter the PPP server phone
number.
Data Call Type: select a data call type;
Analogue or ISDN.
Note: The WAP browser settings may vary,
depending on the service provider. Contact
your service provider for further details.
162
Funbox
Fun Club
(Menu 9.2)
You can access Samsung Fun Club on the
Internet and download various media items,
such as melodies and images.
Samsung Fun Club is the preset web site
providing Samsung phone users with attractive
download services. You can download:
• images and ring tones via SMS.
• 4-level greyscale and colour images from WAP.
• 64-polyphonic melodies from WAP.
• customer services.
• information and electronic catalogues for
Samsung Electronics products.
163
Funbox
Funbox
SFC Home
(Menu 9.2.1)
In this menu, you can access the Samsung Fun
Club homepage.
Note: Before accessing Samsung Fun Club for the
first time, please connect your service
provider’s WAP homepage first. Then
reconnects to Samsung Fun Club. This
service requires WAP subscription and is
unavailable depending on your local system
and services.
Gift Box
(Menu 9.2.2)
Through Samsung Fun Club, you can receive
images and ring tones from other people as
gifts.
This menu stores the notification message from
the Fun Club server to inform you that you a gift
received. After selecting a notification, you can
access Samsung Fun Club to download the gift
to your phone. Downloaded gift items are saved
in Sounds or Images menu.
Service Area
(Menu 9.2.3)
Each time you move to HongKong or China, you
need to change this setting to use the SFC
service, according to the area where you are.
You can choose either China or China HK.
For further details about this service, contact
your service provider.
Games & More
(Menu 9.3)
You can download MIDlets (Java applications
running on mobile phones) from various sources
using the WAP Browser and store them in your
phone.
Note: Java services may not be available,
depending upon your service provider.
When you access the Games & More menu, the
list of the default games appears. Once you have
downloaded games, they are added to the list.
Launching a MIDlet
Note: The procedure explained below are for the
default games. For downloaded games, the
procedure may be different.
1. Scroll to the MIDlet you want on the Games
list and press the Launch soft key.
2. On the startup screen of the MIDlet, scroll to
an option using the Navigation keys.
The following options are available:
• START GAME: starts a new game.
• CONTINUE: allows you to continue the last
game you played.
• HIGH SCORE: shows the high score table.
This option may not be available for some
games.
• HOW TO PLAY: shows how to play the
game and the key functions for the game.
• OPTION: allows you to switch the game
sound on or off.
164
165
Funbox
3. Press the
Funbox
key to confirm your selection.
While you are playing
a game, to
Press the
adjust the sound
volume
Volume keys.
stop the game
and return to
the startup screen
C key.
exit the game
key.
Viewing MIDlet Information
1. Scroll to the MIDlet you want and press the
Info soft key.
The display shows information about the
MIDlet, such as the file size, application
version and its vendor..
2. To scroll to other MIDlet information, press
the Navigation keys.
3. If you want to delete the MIDlet, press the
Delete soft key and then press the Yes soft
key to confirm the deletion.
Note: When you select the default games from
the list, the Delete option is not
available, so that you cannot delete
them.
4. To exit and return to the Games list, press the
Back soft key or the C key.
Entering Text
If you need to enter text while using a MIDlet
you can use, the following input modes are
available:
Upper-case character mode (A): allows you
to enter upper-case English characters.
Lower-case character mode (a): allows you
to enter lower-case English characters.
Number mode (1): allows you to enter
numbers.
Symbol mode: allows you to enter symbols.
After highlighting a symbol by pressing the
Navigation keys, press the
key to insert it.
T9 mode (T9): allows you to enter English
characters by pressing one key per letter. In this
mode, you can change the case by pressing the
0 key.
To change the text input mode, press the
until the appropriate indicator appears.
key
Changing the DNS Settings
The DNS (Domain Name Server) is the server
that assigns the Java server domain name to an
IP address. The DNS setting is preset at the
factory, but sometimes you may need to change
it at your service provider’s instructions.
1. Scroll to Setting on the Games list and press
the Select soft key.
2. Enter the primary address using the number
keypad and press the OK soft key.
3. Enter the secondary address and press the
OK soft key.
166
167
Funbox
Sounds
Funbox
(Menu 9.4)
In this menu, you can view the list of sounds
downloaded from a web server and Samsung
Fun Club or received in multimedia messages.
You can set the downloaded sounds as the
current ring tone or send them to other phones.
By pressing the Options soft key, you can use
the following options:
Rename: allows you to change the name of the
sound.
Delete: deletes the sound.
Set as Ring Tone: sets the sound as your ring
tone.
Images
(Menu 9.5)
In this menu, you can view the list of photos
downloaded from a web server and Samsung
Fun Club or received in messages. You can set
the downloaded photos as the current
background image or send them to other
phones.
Delete All
(Menu 9.6)
This menu allows you to delete all of the
downloaded items in the Games, Sounds and
Images folders. You can delete all of the items at
one time.
To
Press the
select a folder to
clear
Up or Down key. To
delete all of your items,
select All.
place a check mark
Mark soft key.
remove a check
mark
Unmark soft key.
delete the marked
items
Delete soft key.
When a confirming message displays, press the
Yes soft key to confirm.
Memory Status (Menu 9.7)
If you set a photo as your wallpaper, it displays
as My Photo on the list.
You can check the amount of the memory being
used and the memory remaining for games,
sounds and images.
By pressing the Options soft key, you can use
the following options:
Games & More: the display shows the total,
used and free space and the number of games
you downloaded.
Rename: allows you to change the name of the
image.
Delete: deletes the image.
Sounds & Images: the display shows the total,
free and used space, including each space used
by sounds and images.
Set as Wallpaper: sets the image as your
wallpaper for the idle screen.
168
169
Solving Problems
Solving Problems
If you are experiencing problems with your
phone, perform the following simple checks,
before contacting a service professional. This
may save you the time and expense of an
unnecessary service call.
When you switch your phone on, the
following messages may appear
“No service,” “Network failure” or
“Not done” displays
• The network connection was lost. You may be
in a weak signal area (in a tunnel or
surrounded by buildings). Move and try again.
• You are trying to access an option for which
you have not taken out a subscription with
your service provider. Contact the service
provider for further details.
Insert SIM Card
• Check that the SIM card is correctly installed.
Phone Locked Enter Password
• The automatic locking function has been
enabled. You must enter the phone’s password
before you can use the phone.
Enter PIN
• You are using your phone for the first time.
You must enter the Personal Identification
Number supplied with the SIM card.
• The PIN Check feature is enabled. Every time
the phone is switched on, the PIN has to be
entered. To disable this feature, use the PIN
Check menu (Menu 6.6.1).
Enter PUK
• The PIN code was entered incorrectly three
times in succession and the phone is now
blocked. Enter the PUK supplied by your
service provider.
170
You have entered a number but it was
not dialed
• Have you pressed the
key?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring
option.
Your correspondent cannot reach you
• Is your phone switched on (the
key
pressed for more than one second)?
• Are you accessing the right cellular network?
• You may have set an incoming call barring
option.
Your correspondent cannot hear you
speaking
• Have you switched off the microphone?
• Are you holding the phone close enough to
your mouth? The microphone is located at the
bottom of the phone.
171
Solving Problems
The phone starts beeping and
“**Warning** Low Battery” flashes on
the display
• Your battery is insufficiently charged. Recharge
the battery.
The audio quality of the call is poor
• Check the signal strength indicator on the
display (
); the number of bars indicates
the signal strength from strong (
) to weak
( ).
• Try moving the phone slightly or moving closer
to a window if you are in a building.
No number is dialled when you recall a
Phone Book entry
• Check that the number has been stored
correctly, by using the Phone Book Search
feature.
• Re-store the number, if necessary.
If the above guidelines do not help you to
solve the problem, take note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung
after-sales service.
172
Access Codes
There are several access codes that are used by
your phone and its SIM card. These codes help
you protect the phone against unauthorised use.
When requested for any of the codes explained
below, enter the appropriate code (displayed as
asterisks) and press the OK soft key. If you
make a mistake, press the C key one or more
times until the incorrect digit is cleared and then
continue entering the correct code.
The access codes, except for the PUK and PUK2
codes can be changed using the Security menu
(Menu 6.6). See page 128 for further details.
Important! Avoid using access codes
resembling emergency numbers,
such as 999, so that you do not
accidentally dial an emergency
number.
Phone Password
The Phone Lock feature uses the phone
password to protect your phone against
unauthorised use. The phone password is
supplied with the phone and is preset to
“00000000” at the factory.
To
See
activate/deactivate the
Phone Lock feature
page 129.
(Menu 6.6.3).
change the phone
password
page 130.
(Menu 6.6.4).
173
Access Codes
Access Codes
PIN
PIN2
The Personal Identification Number or PIN (4 to
8 digits) protects your SIM card against
unauthorised use. It is usually supplied with the
SIM card.
If you enter an incorrect PIN three times in
succession, the code is disabled and cannot be
used until you re-enable it by entering the PUK
(see below).
The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions,
such as setting the maximum cost of a call.
These functions are available if supported by
your SIM card.
To
See
If you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.
activate/deactivate
the PIN Check feature
page 129.
(Menu 6.6.1).
To change the PIN2, see page 132 (Menu
6.6.8).
change the PIN
page 129.
(Menu 6.6.2).
PUK
The 8-digit PUK (PIN Unblocking Key) is
required to change a disabled PIN. The PUK may
be supplied with the SIM card. If not, or you
have lost it, contact your service provider.
To re-enable your PIN:
1. Enter the PUK and press the OK soft key.
2. Enter a new PIN of your choice and press the
OK soft key.
3. When the Confirm New PIN message
displays, enter the same code again and press
the OK soft key.
If you enter an incorrect PUK ten times in
succession, the SIM card becomes invalid.
Contact your service provider for a new card.
174
PUK2
The 8-digit PUK2 (PIN Unblocking Key 2),
supplied with some SIM cards, is required to
change a disabled PIN2. If you lose the code,
contact your service provider.
To re-enable your PIN2:
1. Enter the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press
the OK soft key.
3. When the Confirm PIN2 message displays,
enter the same code again and press the OK
soft key.
If you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your
service provider for a new card.
175
Access Codes
Barring Password
A 4-digit barring password is required when you
use the Call Barring function. You can obtain the
password from your service provider when you
subscribe to this function.
You can change this password in the Call
Barring menu (Menu 8.2). See page 150 for
further details.
Health and Safety
Information
Exposure to Radio-Frequency
Energy (SAR Information)
This phone meets European Union (EU)
requirements concerning exposure to radio
waves.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured, so as
not to exceed the limits for exposure to radiofrequency (RF) energy, as recommended by the
EU Council. These limits are part of
comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines were developed by
independent scientific organisations through the
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all
persons, regardless of age and health.
The exposure standard for mobile phones
employs a unit of measurement known as SAR
(Specific Absorption Rate). The SAR limit
recommended by the EU Council is 2.0W/kg.*
The Highest SAR Value for this model phone was
??W/kg.
* The SAR limit for mobile phones used by the public is 2.0
watts/kilogram (W/kg) averaged over one grams of body tissue. The
limit incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations in
measurements. The SAR values may vary depending on national
reporting requirements and the network band.
176
177
Health and Safety Information
SAR tests are conducted using standard
operating positions with the phone transmitting
at its highest certified power level in all tested
frequency bands. Although the SAR is
determined at the highest certified power level,
the actual SAR level of the phone while
operating can be well below the maximum value.
This is because the phone is designed to operate
at multiple power levels so as to use only the
power required to reach the network. In general,
the closer you are to a base station, the lower
the power output of the phone.
Precautions When Using Batteries
• Never use any charger or battery that is
damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby
time are greatly affected by the signal strength
on the cellular network and the parameters set
by the network operator.
• Battery charging time depends on the
remaining battery charge, the type of battery
and the charger used. The battery can be
charged and discharged hundreds of times, but
it will gradually wear out. When the operation
time (talk time and standby time) is noticeably
shorter than normal, it is time to buy a new
battery.
Health and Safety Information
• Use only Samsung-approved batteries and
recharge your battery only with Samsungapproved chargers. When a charger is not in
use, disconnect it from the power source. Do
not leave the battery connected to a charger
for more than a week, since overcharging may
shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling
or warming first.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter
conditions, as you will reduce the capacity and
lifetime of the battery. Always try to keep the
battery at room temperature. A phone with a
hot or cold battery may temporarily not work,
even when the battery is fully charged. Li-ion
batteries are particularly affected by
temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental
short- circuiting can occur when a metallic
object (coin, clip or pen) causes a direct
connection between the + and – terminals of
the battery (metal strips on the battery), for
example when you carry a spare battery in a
pocket or bag. Short-circuiting the terminals
may damage the battery or the object causing
the short-circuiting.
• Dispose of used batteries in accordance with
local regulations. Always recycle. Do not
dispose of batteries in a fire.
• If left unused, a fully charged battery will
discharge itself over time.
178
179
Health and Safety Information
Road Safety
Your wireless phone gives you the powerful
ability to communicate by voice, almost
anywhere, anytime. But an important
responsibility accompanies the benefits of
wireless phones, one that every user must
uphold.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, make sure that you
are following the special regulations in a given
area or country.
Operating Environment
Remember to follow any special regulations in
force in any area and always switch off your
phone whenever it is forbidden to use it, or
when it may cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting
equipment, users are advised that for the
satisfactory operation of the equipment and for
the safety of personnel, it is recommended that
the equipment should only be used in the normal
operating position (held to your
ear with the antenna pointing over your
shoulder).
180
Health and Safety Information
Electronic Devices
Most modern electronic equipment is shielded
from radio frequency (RF) signals. However,
certain electronic equipment may not be shielded
against the RF signals from your wireless phone.
Consult the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are
consistent with the independent research and
recommendations of Wireless Technology
Research.
Persons with pacemakers:
• Should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the
phone is switched on
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimise potential interference
If you have any reason to suspect that
interference is taking place, switch your phone off
immediately.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your
hearing aid manufacturer to discuss alternatives.
181
Health and Safety Information
Other Medical Devices
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from
external RF energy. Your physician may be able
to assist you in obtaining this information.
Switch your phone off in health care facilities
when any regulations posted in these areas
instruct you to do so. Hospitals or health care
facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in
motor vehicles. Check with the manufacturer or
its representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Switch off your phone in any facility where
posted notices require you to do so.
182
Health and Safety Information
Potentially Explosive Environments
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all
signs and instructions. Sparks in such areas
could cause an explosion or fire resulting in
bodily injury or even death.
Users are advised to switch the phone off while
at a refuelling point (service station). Users are
reminded of the need to observe restrictions on
the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants
or where blasting operations are in progress.
Areas with a potentially explosive atmosphere
are often but not always clearly marked. They
include the areas below decks on boats,
chemical transfer or storage facilities, vehicles
using liquefied petroleum gas (such as propane
or butane), areas where the air contains
chemicals or particles, such as grain, dust or
metal powders, and any other area where you
would normally be advised to turn off your
vehicle engine.
183
Health and Safety Information
Health and Safety Information
Emergency Calls
Other Important Safety Information
This phone, like any wireless phone, operates
using radio signals, wireless and landline
networks as well as user-programmed functions,
which cannot guarantee connection in all
conditions. Therefore, you should never rely
solely on any wireless phone for essential
communications (medical emergencies, for
example).
• Only qualified personnel should service the
phone or install the phone in a vehicle. Faulty
installation or service may be dangerous and
may invalidate any warranty applicable to the
device.
Remember, to make or receive any calls the
phone must be switched on and in a service area
with adequate signal strength. Emergency calls
may not be possible on all wireless phone
networks or when certain network services
and/or phone features are in use. Check with
local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your
present location (for example, 999 or any
other official emergency number). Emergency
numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency
call. Consult this document and your local
cellular service provider.
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
• Do not store or carry flammable liquids, gases
or explosive materials in the same compartment
as the phone, its parts or accessories.
• For vehicles equipped with an air bag,
remember that an air bag inflates with great
force. Do not place objects, including both
installed or portable wireless equipment in the
area over the air bag or in the air bag
deployment area. If wireless equipment is
improperly installed and the air bag inflates,
serious injury could result.
• Switch your phone off before boarding an
aircraft. The use of wireless phones in an
aircraft may be dangerous to the operation of
the aircraft, and is illegal.
• Failure to observe these instructions may lead
to the suspension or denial of telephone
services to the offender, or legal action, or both.
When making an emergency call, remember to
give all the necessary information as accurately
as possible. Remember that your phone may be
the only means of communication at the scene
of an accident; do not cut off the call until given
permission to do so.
184
185
Health and Safety Information
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care.
The suggestions below will help you fulfill any
warranty obligations and allow you to enjoy this
product for many years.
• Keep the phone and all its parts and
accessories out of the reach of small children.
• Keep the phone dry. Precipitation, humidity
and liquids contain minerals that corrode
electronic circuits.
• Do not use the phone with a wet hand. Doing
so may cause an electric shock to you or
damage to the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
Health and Safety Information
• Do not use harsh chemicals, cleaning solvents
or strong detergents to clean the phone. Wipe
it with a soft cloth slightly dampened in a mild
soap-and-water solution.
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a
radiator. The phone may explode when
overheated.
• Use only the supplied or an approved
replacement antenna. Unauthorised antennas
or modified accessories may damage the
phone and violate regulations governing radio
devices.
• If the phone, battery, charger or any accessory
is not working properly, take it to your nearest
qualified service facility. The personnel there
will assist you, and if necessary, arrange for
service.
• Do not store the phone in cold areas. When
the phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s
electronic circuit boards.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
186
187
Glossary
Glossary
To help you understand the main technical terms
and abbreviations used in this booklet and to
take full advantage of the features of your
mobile phone, here are a few definitions:
Active Folder
Ability to answer a call simply by opening the
phone.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Diverting
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while
answering or making another call; you can then
switch between the two calls, as required.
Call Waiting
Informs you that you have an incoming call
when you are engaged on another call.
Caller Line Identification Services
(Caller ID)
Services allowing subscribers to view or block
the telephone numbers of callers.
188
EMS (Enhanced Message Service)
An adaptation of the Short Message Service
(SMS) that allows users to send and receive ring
tones and the service provider’s logo, as well as
combinations of simple media to and from EMScompliant handsets. Because EMS is based on
SMS, it can use SMS centres the same way that
SMS does. EMS works on all Global System for
Mobile communications (GSM) networks. EMS
senders can use text, melodies, pictures,
sounds, and animations to enhance the
expressive power of messages that are limited
by the display constraints of mobile devices.
GPRS (General Packet Radio Service)
New non-voice value-added service that allows
information to be sent and received across a
mobile telephone network. GPRS provides
continuous connection to the Internet for mobile
phone and computer users. It is based on the
Global System for Mobile Communication (GSM)
circuit-switched cellular phone connections and
the Short Message Service (SMS).
GSM (Global System for Mobile
Communication)
International standard for cellular
communication, guaranteeing compatibility
between the various network operators. GSM
covers most European countries and many other
parts of the world.
189
Glossary
Glossary
Java
PIN (Personal Identification Number)
Programming language generating applications
that can run on all hardware platforms, whether
small, medium or large, without modification. It
has been promoted for and geared heavily to the
Web, both for public Web sites and Intranets.
When a Java program runs from a Web page, it
is called a Java applet. When it is run on a
mobile phone or pager, it is called a MIDlet.
Security code that protects the phone/SIM
against unauthorized use. The PIN is supplied by
the service provider with the SIM card. It may
be a four to eight-digit number and can be
changed, as required.
MMS (Multimedia Message Service)
A message service for the mobile environment,
standardized by the WAP Forum and the 3rd
Generation Partnership Program (3GPP). For
phone users, MMS is similar to Short Message
Service (SMS)-it provides automatic, immediate
delivery of user-created content from phone to
phone. The message addressing used is
primarily phone numbers, thus the traffic goes
from phone to phone. MMS also provides support
for e-mail addressing, so that messages can also
be sent by e-mail. In addition to the text content
of SMS, MMS messages can contain still images,
voice or audio clips, and also video clips and
presentation information.
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Proxy Server
Ability to establish a conference call involving up
to five additional parties.
A proxy server resides between a Web client,
such as a web browser, and a real Web server
and acts as an intermediary between them.
When some people browse a web site, their
browser is not actually connecting to the web
server. The request from their browser goes to a
proxy server, and the proxy server makes the
request to the web server.
A proxy server can improve performance for
groups of users because it caches the results of
all requests for a certain amount of time. If a
user requests a web page that it already loaded
for another user, it reloads the page instead of
forwarding the request to the Web server, which
can be a time-consuming operation.
Phone Password
Roaming
Security code used to unlock the phone when
you have selected the option to lock it
automatically each time it switches on.
Use of your phone when you are outside your
home area (when traveling for example).
Multi-party Calling
190
191
Glossary
Glossary
SDN (Service Dialling Numbers)
Tri Band
Telephone numbers supplied by your network
provider and giving access to special services,
such as voice mail, directory inquiries, customer
support and emergency services.
Ability to handle any of the following types of
network; GSM 900, GSM 1800, combined GSM
900/ 1800 and GSM 1900 MHz bands, for
greater call success and wider roaming.
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small
slot on the back of the phone and is protected
by the battery.
SMS (Short Message Service)
Your phone automatically searches for the last
network used. If, for any reason, this network is
unavailable, your phone will attempt to register
with a different network.
Voice Mail
Computerized answering service that
automatically answers your calls when you are
not available, plays a greeting (optionally in your
own voice) and records a message.
Network service sending and receiving messages
to and from another subscriber without having to
speak to the correspondent. The message
created or received can be displayed, received,
edited or sent.
Soft Keys
Two keys marked
purpose of which:
and
on the phone, the
• varies according to the function that you are
currently using.
• is indicated on the bottom line of the display
just above the corresponding key.
192
193
194
195
➀ Press the Menu soft
key.
➁ Scroll using the Up and
Down keys through the
list of the menus until
you reach the one you
want.
➂ Press the Select soft
key.
➃ Scroll using the Up and
Down keys through the
list of the options until
the one you want is
selected.
➄ Press the Select soft
key.
Each of the two soft keys (
and
perform the function indicated by the text
above it, on the bottom line of the display.
Access the
Menu
Functions
Press and hold the
key.
➀ Enter the number.
➁ Press the
key.
Briefly press the
key.
➀ Press the View soft
key.
➁ Scroll using the Up and
Down keys through the
missed calls.
➂ To return the call,
press the
key.
Slide the folder up
or press the
key.
Press the
or
key
on the left side of the
phone.
Switch On/Off
Makes a Call
End a Call
View Missed
Calls After Missing
Them
Answer a
Call
Adjust the
Volume
Quick Reference Card
Tri Band SGH-E608 GPRS Telephone
Store a
Number in
Phone Book
Choose
the Alert
Type
➀ Enter the number and
press the Save soft
key.
➁ Select an icon and press
the Select soft key.
➂ Select a memory.
➃ Press the Select soft key.
➄ Enter the name.
➅ Press the OK soft key.
➆ If necessary, change the
location number.
➇ Press the OK soft key.
➈ Press the
key to
return to Idle mode.
➀ Select the Alert Type
menu (Menu 5.3).
➁ Select an option:
• Light Only
• Melody
• Vibration
• Vibra+Melody
➂ Press the Select soft key.
Take a Photo
Search for a
Number in
Phone Book
• With the folder open
➀ Press and hold the Camera
key.
➁ Press the right soft key or
Camera key.
• With the folder closed
➀ Press and hold the Camera
key.
➁ Press the Camera key.
➀ Press the Name soft
key.
➁ Select the Search option.
➂ Enter the first few letters
of the name.
➃ To scroll through the
names, press the Up or
Down key.
➄ Press the View soft key.
➅ To scroll through the
numbers, press the Up or
Down key.
➆ Press the
key to dial.
196

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2004:03:31 17:27:48-05:00
Create Date                     : 2004:03:31 17:26:18-05:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Page Count                      : 99
Mod Date                        : 2004:03:31 17:27:48-05:00
Creation Date                   : 2004:03:31 17:26:18-05:00
Metadata Date                   : 2004:03:31 17:27:48-05:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools