Samsung Electronics Co SGHE860V Single-Band PCS GSM Phone w/ Bluetooth Transmitter User Manual FCC FOR SGH E860V

Samsung Electronics Co Ltd Single-Band PCS GSM Phone w/ Bluetooth Transmitter FCC FOR SGH E860V

UserManual.wiki >

Samsung Electronics Co >

SGHE860V User Manual HTML Version

Users Manual

World Wide Web

http://www.samsungmobile.com

Printed in Korea

Code No.:GH68-xxxxA

English. 05/2005. Rev 1.0

* Some of the contents of this manual may not match from your phone, depending

on the software installed, your service provider or country.

* Depending on your country, your phone and accessories may appear different from

the illustrations in this manual.

SGH-E860V

User’s Manual

Draft

2005. 05. 24

E860BUED2

Important

safety

precautions

Failure to comply with the following

precautions may be dangerous or illegal.

Drive safely at all times

Do not use a hand-held phone while driving. Park

the vehicle first.

Switch off the phone when refuelling

Do not use the phone at a refuelling point (service

station) or near fuels or chemicals.

Switch off in an aircraft

Wireless phones can cause interference. Using them

in an aircraft is both illegal and dangerous.

Switch off the phone near all medical

equipment

Hospitals or health care facilities may be using

equipment that could be sensitive to external radio

frequency energy. Follow any regulations or rules in

force.

Important safety precautions

Interference

All wireless phones may be subject to interference,

which could affect their performance.

Be aware of special regulations

Meet any special regulations in force in any area and

always switch off your phone whenever it is forbidden

to use it, or when it may cause interference or danger.

Water resistance

Your phone is not water-resistant. Keep it dry.

Sensible use

Use only in the normal position (held to the ear). Avoid

unnecessary contact with the antenna when the phone

is switched on.

Emergency calls

Key in the emergency number for your present

location, then press .

Keep your phone away from small children

Keep the phone and all its parts, including accessories,

out of the reach of small children.

Accessories and batteries

Use only Samsung-approved accessories and

batteries. Use of any unauthorised accessories could

damage your phone and may be dangerous.

Qualified service

Only qualified service personnel may repair your

phone.

For more detailed safety information, see "Health and

safety information" on page 90.

• The phone could explode if the battery is

replaced with an incorrect type.

• Dispose of used batteries according to the

manufacturer’s instructions.

About this Guide

This User’s Guide provides you with condensed

information about how to use your phone. To quickly

learn the basics for your phone, please refer to “Get

started” and “Step outside the phone.”

In this guide, the following instruction icons appear:

Indicates that you need to pay careful

attention to the subsequent information

regarding safety or phone features.



Indicates that you can get more information on

the referenced page.

→

Indicates that you need to press the

Navigation keys to scroll to the specified option

and then select it.

[ ]

Indicates a key on the phone. For example,

[]

< >

Indicates a soft key, whose function is

displayed on the phone screen. For example,

• Camera and camcorder

Use the camera module on your

phone to take a photo or record a

video.

Special

features of your phone

•Media player

Play media files on your phone.

•IrDA

Send and receive Phonebook and

organiser data and media files via

an infrared port.

Special features of your phone

•Bluetooth

Send photos, images, videos, and

other personal data, and connect

to other devices using free,

wireless Bluetooth technology.

•Web browser

Access the wireless web and access

various services and current

information.

• Get personal with photo caller

See who’s calling you when their

very own photo displays.

• Name card

Create name cards with your

number and profile. Whenever

introducing yourself to others, use

this convenient electronic name

card.

• Multimedia message service (MMS)

Send and receive MMS messages with a

combination of text, images, video, and audio.

•E-mail

Send and receive e-mails with images, video, and

audio attachments.

•Java

Enjoy Java

™

-based embedded

games and download new games.

•Calendar

Keep track of your daily, weekly,

and monthly schedule.

• Voice recorder

Record memos or sounds.

Contents

Unpack 6

Make sure you have each item

Your phone 6

Buttons, features, and locations

Get started 7

First steps to operating your phone

Install and charge the phone ................................... 7

Power on or off...................................................... 8

Keys and display.................................................... 9

Access menu functions.......................................... 11

Customise your phone .......................................... 12

Make/Answer calls................................................ 14

Step outside the phone 14

Begin with your camera, music, and other special features

Use camera......................................................... 14

Play media files ................................................... 15

Browse the web ................................................... 17

Use Contacts ....................................................... 17

Send messages.................................................... 19

View messages .................................................... 21

Use Bluetooth...................................................... 22

Enter text 23

AB, T9, Number, and Symbol mode

Call functions 25

Advanced calling features

Menu functions 29

All menu options listed

Solve problems 88

Help and personal needs

Health and safety information 90

Index 97

Overview of menu functions

To access Menu mode, press <

> in Idle mode.

1 Entertainment



p.29

2 Vodafone live!



p.30

1 Vodafone live!

2 Enter URL

3 Bookmarks

4 History

5 Browser settings

6 What’s New

7 Game

8 Ringtones

9 Pictures

0 News

* Sports



p.30



p.31



p.32



p.32



p.32



p.32



p.32



p.33



p.33



p.33



p.33

3 Media player



p.33

1 Music

2 Video



p.33



p.35

4 Camera



p.36

5 Messaging



p.41

1 Create

2 Inbox

3 Email box

4 Drafts

5 Sent messages

6 Voicemail

7 Message archive

8 Templates

9 Delete all

0 Messaging settings

* Memory status

# Media album



p.41



p.44



p.47



p.48



p.49



p.49



p.49



p.50



p.50



p.50



p.55



p.55

6 My files



p.56

Pictures

Videos

Music

Ringtones

Games

Applications

Themes

Other documents

Memory status



p.56



p.57



p.58



p.58



p.59



p.60



p.60



p.60



p.61

7 Organiser&Tools



p.61

1 Vodafone

2 Applications

3 Alarms

4 Calendar

5 Voice recorder

6 World time

7 PIM sync

8 Calculator

9 Converter

0 Timer

* Stopwatch

# Memory status



p.61



p.62



p.62



p.62



p.65



p.67



p.67



p.68



p.68



p.69



p.69



p.69

8 Contacts



p.69

1 Contacts list

2 Add contact

3 Groups

4 Call log

5 Speed dialing

6 My contact details

7 My numbers

8 Settings

9 Service number



p.70



p.70



p.71



p.72



p.73



p.74



p.74



p.74



p.75

9 Settings



p.75

1 Phone settings

2 Display settings

3 Messaging settings

4 Call settings

5 Contact settings

6 live! Cast name

settings

7 Streaming settings

8 Connectivity

9 Security

0 Memory status



p.75



p.78



p.79



p.79



p.81



p.82



p.82



p.82



p.87



p.88

*Shows only if supported by your SIM

card.

Unpack

Make sure you have each item

You can obtain various accessories

from your local Samsung dealer.

Phone Travel Adapter

Battery User’s Manual

The items supplied with your phone

and the accessories at your

Samsung dealer may vary,

depending on your country or

service provider.

Your phone

Buttons, features, and locations

Left soft key

Headset jack

Volume keys

Dial key

Special

function keys

Earpiece

Power on/off/

Menu exit key

Right soft key

Microphone

Navigation keys

(Up/Down/Left/

Right)

Menu access/

Confirm key

(Centre)

Delete key

Flash Camera lens

Infrared

port

Camera

key

Alphanumeric

keys

Display

Get started

First steps to operating your phone

SIM card information

When you subscribe to a cellular network, you receive

a plug-in SIM (Subscriber Identity Module) card

loaded with your subscription details, such as your

PIN, and available optional services.

Install and charge the phone

Remove the battery.

If the

phone is already

on, first turn it off by

holding

[]

Insert the SIM card.

Make sure that the gold-

coloured contacts on the

card face down into the

phone.

Install the battery.

Plug the travel adapter

into the phone.

Plug the adapter into a standard AC wall outlet.

When the phone is completely charged (the

battery icon steps blinking), unplug the adapter

from the power outlet.

3 4

Get started

Low battery indicator

When the battery is low:

• a warning tone sounds,

• the battery low message displays, and

• the empty battery icon blinks.

If the battery level becomes too low, the phone

automatically turns off. Recharge your battery.

Power on or off

Keypad lock

When you close the phone, the keypad lock feature

locks the exposed keys so that nothing will happen if

the keys are accidentally pressed.

To unlock the keypad, press <

Unlock

> and press

Remove the adapter from the phone.

Switch on

Do not turn on

the phone when

mobile phone

use is prohibited.

1. Open the phone.

2. Press and hold [ ] to turn on

the phone.

3. If necessary, enter the PIN and

press <

Switch off

1. Open the phone.

2. Press and hold [ ].

Get started

Keys and display

Perform the function indicated on the

bottom line of the display.

In Idle mode, access your favourite

menus directly.



p. 77

In Menu mode, scroll through the menu

options.

In Idle mode, access Menu mode.

In Menu mode, select the highlighted

menu option.

Delete characters from the display and

selected item in an application.

Send or answer a call.

In Idle mode, retrieve the recent numbers

dialled, missed, or received.

End a call.

Hold down to switch the phone on and off.

In Menu mode, cancel input and return

the phone to Idle mode.

Enter numbers, letters, and some special

characters.

In Idle mode, hold

[1]

down to access

your voice mail server. Hold [

] down to

enter an international call prefix.

Enter special characters.

In Idle mode, hold [

]

down to activate

or deactivate the Silent profile. Hold [ ]

down to enter a pause between numbers.

Adjust the phone volume.

In Idle mode, adjust the keypad tone

volume. With the phone closed, hold

down to turn on the backlight.

In Idle mode, hold down to turn on the

camera.

In Camera mode, take a photo or record a

video.

Get started

Display

Layout

Icons

Received signal strength

GPRS network

Roaming network

New text message

New multimedia message

New e-mail message

Text and graphics

display messages,

instructions, and

information you enter.

Soft key function

indicators

show the current functions

assigned to the two soft

keys.

Menu live!

Icons

display various icons.

Icons

(continued)

New voice mail

Call in progress

Out of your service area; you cannot

send or receive calls

Call diverting feature is active

Home Zone, if you have registered

for the appropriate service

Bluetooth feature is active

Connected to hands-free or headset

Synchronised with a PC

Silent profile

Alarm set

Battery power level

* The icons shown on the display may vary, depending

on your country or service provider.

Get started

Access menu functions

Use the soft

keys

The roles of the soft keys vary

depending on the function you are

using. The bottom line of the

display indicates their current role.

Press the left soft

key to access

Menu mode.

Press the right soft

key to launch the

web browser.

Menu live!

Select an

option

1. Press the appropriate soft key.

2. Press the Navigation keys to

move to the next or previous

option.

3. Press <

Select

> or [Centre] to

confirm the function displayed

or option highlighted.

4. To exit, choose either of the

following methods.

•Press <

Back

> to move up

one level.

• Press [ ] to return to Idle

mode.

Use shortcuts

Press the number key

corresponding to the option you

want.

Get started

Customise your phone

1. In Idle mode, press <

and select

Settings

→

Phone

settings

→

Phone language

2. Select a language.

1. In Idle mode, press <

and select

Settings

→

Phone

settings

→

Assign ringtone

→

Voice call ringtone

→

Music

Ringtones

2. Select a ringer melody.

3. Press <

Save

Display

language

Call ringer

melody

You can set a wallpaper for the idle

screen.

1. In Idle mode, press <

and select

Settings

→

Display

settings

→

Wallpaper

→

Main

display

→

Pictures

Videos

2. Select an image.

3. Press <

Add

4. Press <

Save

You can activate the Silent profile

to avoid disturbing other people

with your phone sound.

Press and hold [ ] in Idle mode.

Idle mode

wallpaper

Silent mode

Get started

You can use the Navigation keys as

shortcut keys to access specific

menus directly from Idle mode.

To assign a shortcut menu:

1. In Idle mode, press <

and select

Settings

→

Phone

settings

→

Short cut

2. Select a key.

3. Select a menu to be assigned to

the key.

shortcuts

You can protect the phone against

unauthorised use with a phone

password. The phone will require

the password on power-up.

1. In Idle mode, press <

and select

Settings

→

Security

→

Change phone

password

2. Enter the default password,

00000000

, and press <

3. Enter a new 4- to 8-digit

password and press <

4. Enter the new password again

and press <

5. Select

Phone lock

6. Select

Enable

7. Enter the password and press

Phone lock

Make/Answer calls

Step outside the phone

Begin with your camera, music, and other special features

Use camera

1. In Idle mode, enter an area code

and phone number.

2. Press

[]

3. To end the call, press

[]

1. When the phone is ringing, press

[]

2. To end the call, press

[]

Press [ / ].

Make a call

Answer a call

Adjust the

volume during

a call

1. Open the phone.

2. In Idle mode, press and hold

[

]

to turn on the camera.

Adjust the image by rotating

the camera lens and aiming it

at the subject

4. Press

[Centre

] to take a photo.

The photo is saved automatically.

Pres

s <

Preview

> to

take

another photo.

Take a photo

Step outside the phone

Play media files

1. In Idle mode, press <

> and

select

My files

→

Pictures

2. Select the photo you want.

1. In Idle mode, press and hold

[

]

to turn on the camera.

2. Press [

] to switch to Record

mode.

3. Press

[Centre

] to start recording.

4. Press

[Centre

] to stop recording.

The video is saved automatically.

5. Press <

Preview

> to record

another video.

In Idle mode, pre

ss <

and select

My files

→

Videos

2. Select the video you want.

View a photo

Record a video

Play a video

Use these methods:

• Download from the wireless

web



p. 56

• Download from a computer

using Samsung PC Studio



Samsung PC Studio User’s

Guide

• Receive via IrDA or Bluetooth



p. 82, p. 85

1. In Idle mode, press <

and select

Media player

→

Music

2. Press <

Options

> and select

Create playlist

3. Enter a name for the play list

and press <

4. Select the playlist you created.

Copy media

files to the

phone

Create a music

play list

Step outside the phone

5. Press <

Options

> and select

Add music

6. Check the files you want and

press <

Select

1. From the playlist, select the file

you want.

2. During playback, use the

following keys:

• Centre: pauses or resumes

playback.

• Left: goes back to the

previous file. Moves

backward in a file when held

down.

• Right: skips to the next file.

Skips forward in a file when

held down.

Create a music

play list

(continued)

Play MP3 file

• Up: opens the play list.

• / : adjusts the volume.

• Down: stops playback.

1. In Idle mode, press <

and select

Media player

→

Video

2. Select the file you want.

3. During playback, use the

following keys:

• Centre: pauses or resumes

playback.

•Left: moves backward in a

file.

• Right: skips forward in a file.

• / : adjusts the volume.

Play MP3 file

Play video file

Step outside the phone

Browse the web

Using a built-in web browser, you can get easy access

to the wireless web to get a variety of up-to-date

services and information and to enjoy downloads of

web content.

Use Contacts

In Idle mode, press <

live!

• To scroll through browser items,

press [Up] or [Down].

• To select an item, press

Select

• To return to the previous page,

press <

Back

• To access browser options,

press <

Options

Launch the

browser

Navigate with

the web

browser

To the phone’s memory

1. In Idle mode, enter a phone

number and press <

Options

2. Select

Save contact

→

Phone

→

a number type.

3. Specify the contact information:

First name, Last name, Mobile,

Home, Office, Fax, Other, Email,

Caller ID, Ringtones, Groups,

Memo, Additional info, Street,

City, Postal code,

State/Province, Country, and

Url.

4. Press <

Save

> to save the

entry.

Add an entry

Step outside the phone

To the SIM card

1. In Idle mode, enter a phone

number and press <

Options

2. Select

Save contact

→

SIM

3. Enter a name.

4. Press <

Save

> to save the

entry.

1. In Idle mode, press <

and select

Contacts

→

Contacts list

2. Select an entry.

3. Select a number and press

[]

to dial, or press <

Options

> to

access options.

Add an entry

(continued)

Find an entry

1. In Idle mode, press <

and select

Contacts

→

contact details

2. Specify your contact

information.

3. Press <

Save

> to save the

name card.

4. To send the name card to other

people, press <

Options

> and

select

Send

→

the sending

method you want.

Create and

send a name

card

Step outside the phone

Send messages

1. In Idle mode, press <

and select

Messaging

→

Create

→

SMS

2. Enter the message text.

3. Press <

Options

> and select

Send

4. Enter destination numbers.

5. Press <

Options

> and select

Send

to send the message.

1. In Idle mode, press <

and select

Messaging

→

Create

→

MMS

2. Enter the message text.

Send a text

message (SMS)

Send a

multimedia

message

(MMS)

3. Press <

Options

> to access the

following options:

•

Add item

Create item

add a media item.

•

Add subject

: add a

message subject.

•

Insert entry

: retrieve a

template, contact entry, or

bookmark item.

•

Attach details

: add a

name card or a calendar

memo.

•

Page duration

: set the

page duration.

4. When you have finished, press

Options

> and select

Send

5. Enter destination numbers.

6. Press <

Options

> and select

Send

to send the message.

Step outside the phone

1. In Idle mode, press <

and select

Messaging

→

Create

→

Postcard

2. Enter a message text.

3. Press <

Options

> to access the

following options:

•

Add picture

: retrieve a

photo.

•

Take picture

: add a new

photo.

•

Insert template

: retrieve

a template.

4. When you have finished, press

Options

> and select

Send

5. Specify the recipient’s

information: Name, Additional

info, Street, City, Postal code,

State/Province, and Country.

6. Press <

Options

> and select

Send

to send the postcard.

Send a

Postcard

1. In Idle mode, press <

and select

Messaging

→

Create

→

2. Enter the e-mail text.

3. Press <

Options

> to access the

following options:

•

Attach item

Create item

add a media item.

•

Add subject

: enter the

email subject.

•

Insert entry

: retrieve a

template, contact, or

bookmark memo.

•

Attach detail

: add a name

card or a calendar memo.

4. When you have finished, press

Options

> and select

Send

5. Enter e-mail addresses.

6. Press <

Options

> and select

Send

to send the e-mail.

Send an e-mail

Step outside the phone

View messages

1. In Idle mode, press <

and select

Messaging

→

Inbox

2. Select a text message.

When a notification appears:

1. Press <

View

2. Press <

Options

> and select

Retrieve

3. Select an MMS message from

the Inbox.

From the Inbox

1. In Idle mode, press <

and select

Messaging

→

Inbox

2. Select an MMS message.

View a text

message

View a

multimedia

message

1. In Idle mode, press <

and select

Messaging

→

box

2. Select an account.

3. Press <

Options

> and select

Download

to retrieve an

e-mail or a header.

4. Select an e-mail or a header.

5. If you selected a header, press

Options

> and select

Retrieve

View an e-mail

Step outside the phone

Use Bluetooth

Your phone is equipped with Bluetooth technology

which enables you to connect the phone wirelessly to

other Bluetooth devices and exchange data with them,

talk hands-free, or control the phone remotely.

In Idle mode, press <

> and

select

Settings

→

Connectivity

→

Bluetooth

→

Activation

→

1. In Idle mode, press <

and select

Settings

→

Connectivity

→

Bluetooth

→

My devices

→

Search new

device

2. Select a device.

3. Enter a Bluetooth PIN code or

the other device’s Bluetooth PIN

code, if it has one, and press

Turn on

Bluetooth

Search for and

pair with a

Bluetooth

device

When the owner of the other

device enters the same code,

pairing is complete.

1. Access an application.

2. Scroll to an item.

3. Press <

Options

> and select

Send

→

via Bluetooth

4. Select a device.

5. If necessary, enter the

Bluetooth PIN and press <

To receive data via Bluetooth, your

phone’s Bluetooth feature must be

active.

If necessary, press <

Yes

> to

confirm the reception twice.

Send data

Receive data

Enter text

AB, T9, Number, and Symbol mode

You can enter text for some features such as

messaging, Contacts, or Calendar, using AB mode, T9

mode, Number mode, and Symbol mode.

Changing the text input mode

The text input mode indicator appears when the cursor

is in a text field.

• Press and hold [ ] to switch between T9 ( )

and AB modes ( ). Depending on your country,

you may also be able to access an input mode for

your specific language.

• Press [ ] to change case or switch to Number

mode ( ).

• Press and hold [ ] to switch to Symbol mode

().

Using AB mode

Press the appropriate key until the character you want

appears on the screen.

Tips for using AB mode

• To enter the same letter twice or to enter a

different letter on the same key, wait for the cursor

to move to the right automatically or press [Right].

Then, enter the next letter.

Enter text

• Press [ ] to insert a space.

• Press [Left] or [Right] to move the cursor.

•Press [

] to delete characters one by one. Press

and hold [

] to clear the display.

Using T9 mode

T9 is a predictive text input mode that allows you to

key in any character using single keystrokes.

Entering a word in T9 mode

1. Press [

] to [

]

to start entering a word. Press

each key once for each letter.

For example, press [

], [

], and [

] to

enter HELLO in T9 mode.

T9 predicts the word that you are typing, and it

may change with each key that you press.

2. Enter the whole word before editing or deleting

characters.

3. When the word displays correctly, go to step 4.

Otherwise, press [

] to display alternative word

choices for the keys that you have pressed.

For example, OF and ME use [

] and [

4. Press [ ] to insert a space and enter the next

word.

Tips for using T9 mode

• Press [

] to enter periods or apostrophes

automatically.

• Press [ ] to insert a space.

• Press [Left] or [Right] to move the cursor.

• Press [

] to delete characters one by one. Press

and hold [

] to clear the display.

Adding a new word to the T9 dictionary

This feature may not be available for some languages.

1. Enter the word that you want to add.

2. Press [

] to display alternative words for your key

presses. When there are no more alternative

words,

Add

appears on the bottom line.

3. Press <

Add

4. Enter the word you want using AB mode and press

Using Number mode

Number mode enables you to enter numbers.

Press the keys corresponding to the digits you want.

Using Symbol mode

Symbol mode enables you to insert symbols.

Call functions

Advanced calling features

Making a call

1. In Idle mode, enter the area code and phone

number.

2. Press [ ].

Making an international call

1. In Idle mode, press and hold [

]. The

character

appears.

2. Enter the country code, area code, and phone

number, then press [ ].

To Press

display more symbols [Up] or [Down].

select a symbol the corresponding

number key.

clear the entered symbol(s) [

insert the symbol(s) <

• Press

[

]

to clear the last digit or press and hold

[

]

to clear the whole display. You can move the

cursor to edit an incorrect digit.

• Press and hold

[ ] enter a pause between

numbers.

Call functions

Redialling recent numbers

1. In Idle mode, press [ ] to display the list of

recent numbers.

2. Scroll to the number you want and press [ ].

Making a call from Contacts

Once you have stored a number in Contacts, you can

dial the number by selecting it from Contacts.



p. 70

You can also use the speed dial feature to assign your

most frequently called numbers to specific number

keys.



p. 73

Dialling a number from the SIM card

1. In Idle mode, enter the location number for the

phone number you want and press [ ].

2. Press [Left] or [Right] to scroll through other

numbers.

3. Press <

Dial

> or [ ] to dial the number you want.

Ending a call

Close the phone or press [ ].

Answering a call

When you receive an incoming call, the phone rings

and displays the incoming call image.

Press <

> or [ ] to answer the call.

Tips for answering a call

• When

Anykey

answer

in the

Phone

settings

menu is active, you can press any key, except for

Reject

> or [ ].



p. 78

• Press <

Reject

> or [ ] to reject a call.

• With the phone closed, press and hold [ / ] to

reject a call.

Viewing missed calls

If you have missed calls, the screen displays how

many calls you have missed.

1. Press <

View

2. If necessary, scroll through the missed calls.

3. Press [ ] to dial the number you want.

Call functions

Using the headset

Use the headset to make or answer calls without

holding the phone.

Connect the headset to the jack on the left side of the

phone.

The button on the headset works as listed below:

Options during a call

You can access a number of functions during a call.

Adjusting the volume during a call

Use [ / ] to adjust the earpiece volume during a call.

Press [ ] to increase the volume level and [ ] to

decrease the volume level.

Placing a call on hold/Retrieving

Press <

Hold

> or <

Retrieve

> to place a call on hold

or retrieve the call.

Making a second call

You can make another call if your network supports it.

1. Press <

Hold

> to put the call on hold.

2. Make the second call in the normal way.

3. Press <

Swap

> to switch between the calls.

4. Press <

Options

> and select

End

held

call

to end

the call on hold.

5. To end the current call, press [ ].

Answering a second call

You can answer an incoming call while already on the

phone, if your network supports it and you have

activated the call waiting feature.



p. 81

1. Press [ ] to answer the call. The first call is

automatically put on hold.

2. Press <

Swap

> to switch between the calls.

To Press

redial the last call and hold the button twice.

answer a call the button.

end a call the button.

Call functions

3. Press <

Options

> and select

End

held

call

to end

the call on hold.

4. To end the current call, press [ ].

Using the loudspeaker feature

Use the loudspeaker feature to talk and listen with the

phone a short distance away.

Press [Centre] to activate the loudspeaker feature.

Press the key again to switch back to the earpiece.

Using In-call options

Press <

Options

> to access the following options

during a call:

•

New

: make a new call.

•

Switch to headset

Switch to phone

: switch the

call to a Bluetooth headset or back to the phone.

•

: access the phone's menu functions.

•

Mute

Unmute

: switch off the phone's microphone

so that the other person on the phone cannot hear

you, or switch it back on.

•

Mute keys

Send keys

: switch the key tones on

or off.

•

Send DTMF

: send the DTMF (Dual tone multi-

frequency) tones as a group. The DTMF tones are

the tones used in phones for tone dialling,

sounding when you press the number keys. This

option is helpful for entering a password or an

account number when you call an automated

system, like a banking service.

•

Phonebook

: access the contact list.

•

SIM service

: access special services, such as

news, weather forecasts, entertainment, and

location services, provided by your SIM card. This

option is available when you use a SIM card

supporting SIM Application Tool kit menus.

•

End held call

: disconnect the call currently on

hold.

To communicate with answering machines or

computerised telephone systems,

Send keys

must

be selected.

Menu functions

Entertainment

(Menu 1)

•

Transfer

: transfer the currently active call to a

caller on hold. The two callers can talk to each

other, but you are disconnected from the call.

•

Join

: set up a multi-party call by adding a caller

on hold to a currently active call. You can include

up to 5 people on a multi-party call.

•

Private

: have a private conversation with one

multi-party call participant. The other participants

can converse with each other. After the private

conversation, select Join to return to the multi-

party call.

•

Remove

: disconnect one multi-party call

participant.

Menu functions

All menu options listed

Entertainment

(Menu 1)

Use this menu to download Java games and play

them.

To access this menu, press <

> in Idle mode and

select

Entertainment

Playing a game

1. Select a game,

Bobby Carrot

Airship Racing

Arch Angel

, or

Freekick

2. Follow the onscreen instructions.

The game versions that come with the phone are trial

versions. The full version can be downloaded from the

VF portal by selecting the corresponding menu item in

the game menu.

Using Java game options

While viewing the game list, press <

Options

> to

access the following options:

•

Go to url

: go to the specified URL address.

•

Play

: launch the selected game.

•

Details

access the game properties.

•

Permissions

: set permission settings for services

requiring cost charges, such as Internet access,

SMS, and application update.

•

Settings

: activate a connection profile to be used

for accessing a Java server. You can also make or

edit a profile.



p. 86

Downloading new games

1. Select

More games

2. Search for a game and follow the onscreen

instructions to download it.

Vodafone live!

(Menu 2)

The web browser on your phone allows you to access

the wireless web. Using the web browser, you can

access up-to- date information and a wide variety of

media content, such as wallpapers, ring tones, and

music files.

To access this menu, press <

> in Idle mode and

select

Vodafone live!

(Menu 2.1)

Use this menu to connect your phone to the network

and load the home page of the wireless web service

provider. You can also press <

live!

> in Idle mode.

Navigating the web browser

To Press

scroll through browser items [Up] or [Down].

select a browser item <

Select

return to the previous page <

Back

Menu functions

Vodafone live!

(Menu 2)

Using web page options

From any web page, press <

Options

> to access the

following options:

•

Go to homepage

: send you back to the

homepage.

•

Enter URL

: manually enter the URL address of the

web page you want to access.

•

Reload

: reload the current page with updated

information.

•

Bookmarks

: add the current page to your

bookmark list and view the bookmark list.

•

History

: show URLs previously visited.

•

Send URL

: send the URL via SMS or e-mail.

•

To DesktopView

To SmartFitView

: switch to

between DesktopView mode and SmartFitView

mode.

For

To DesktopView

, the web page is displayed in

actual size.

For

To SmartFitview

, the phone automatically

resizes the web page to fit on the phone screen.

•

Save image

: save the image of the current page.

•

Page

properties

: access the properties of the

current page.

•

Browser options

: access the browser settings.

Empty cache

: delete cache.

: change the cookie settings and delete

cookies.

Preferences

: select the method to view a web

page.

About browser

: access version and copyright

information of the web browser.

Exiting the web browser

Press [ ] to exit the browser.

Enter URL

(Menu 2.2)

You can enter the URL of a web page in order to

quickly access the page.

Menu functions

Bookmarks

(Menu 2.3)

Use this menu to save the preset URL addresses in

order to quickly access websites.

Adding a bookmark

1. Press <

Options

> and select

Add bookmark

2. Enter a name for the bookmark and press [Down].

3. Enter a URL address and press <

Save

Accessing a bookmarked page

Scroll to a bookmark item and press [Centre].

Using bookmark options

From the bookmark list, press <

Options

> to access

the following options:

•

Go to

: go to the specific link.

•

Go to homepage

: go back to the homepage.

•

Edit bookmark

: edit the bookmark you have

added.

•

Enter URL

: access the bookmarked website.

•

Add Bookmark

: add a new bookmarked item.

•

Send URL

: send the URL via SMS or e-mail.

•

Delete all

: delete all bookmarked items.

•

Delete

: delete the bookmark you have added.

History

(Menu 2.4)

You can access the list of pages you have accessed

recently.

Browser settings

(Menu 2.5)

Use this menu to select a connection profile to be used

for connecting to the Internet. You can also make or

edit a profile.



p. 86

What’s New

(Menu 2.6)

Use this menu to access the website preset by

Vodafone to get new information or download new

applications.

Game

(Menu 2.7)

Use this menu to access the website preset by

Vodafone and download games.

Menu functions

Media player

(Menu 3)

Ringtones

(Menu 2.8)

Use this menu to access the website preset by

Vodafone and download ringtones.

Pictures

(Menu 2.9)

Use this menu to access the website preset by

Vodafone and download pictures.

News

(Menu 2.0)

Use this menu to access the website preset by

Vodafone and download recent news.

Sports

(Menu 2. )

Use this menu to access the website preset by

Vodafone and download sports news.

Media player

(Menu 3)

Use this menu to enjoy media files, such as MP3

music, ringtones, or video clips.

To access this menu, press <

> in Idle mode and

select

Media player

Downloading or receiving media files

Use these methods to save media files to your phone’s

memory:

• Download from the wireless web



p. 56

• Download from a computer using the Samsung PC

Studio program



Samsung PC Studio User’s

Guide

• Receive via IrDA or Bluetooth



p. 85, p. 82

Music

(Menu 3.1)

Use this menu to play music files.

Creating a play list

1. From the MP3 player screen, press <

Options

and select

Create playlist

Menu functions

2. Enter a name for the play list and press <

3. Select the play list you created.

4. Press <

Options

> and select

Add music

5. Check the file(s) you want by pressing [Centre]

and press <

Select

Playing music files

From the play list, select the file you want. The

selected file plays.

During playback, use the following keys:

Using music player options

During playback, press <

Options

> to access the

following options:

•

Pause

Play

: pause or resume playback.

•

Stop

: stop playback.

•

View playlist

: display the play list.

•

Create MMS

: send the selected file via MMS.

•

Send

: send the select file via Bluetooth. You can

also send the file to the online media album.

•

Set as

: set the file as your ringtone or as a caller

alert melody for a Contacts entry.

•

Details

: access the properties of the file.

Keys Function

Centre Pauses or resumes playback.

Left Goes to the previous file.

Right Skips to the next file.

Up Opens the play list.

/ Adjusts the volume level.

Turns the 3D sound on or off.

Changes the skin type.

Changes the repeat mode

Changes the equalizer mode

Turns Shuffle mode on or off.

Down Stops playback.

Keys Function

Menu functions

Media player

(Menu 3)

•

Player settings

: change the default settings for

playing music files.

Repeat mode

: select a repeat mode.

Shuffle

: set the MP3 player to play music in

random order.

Lock volume key

: set whether or not you use the

volume keys while playing music with the phone

closed.

Equalizer

: select an equalizer setting.

3D sound

: turn 3D sound on or off.

Skin

: select a skin type.

Volume

: select a volume level.

Using file options

From the music file list, press <

Options

> to access

the following options:

•

Play

: play the selected file.

•

Add music

: add music files to a play list.

•

Create MMS

: send the file via MMS.

•

Send

: send the file via Bluetooth. You can also

send the file to the online media album.

•

Move in playlist

: move the file to the position you

want in the current play list.

•

Set as

: set the music file as your ringtone or as a

caller alert melody for a Contact entry.

•

Remove

: remove the file from the play list.

•

Details

: access the file properties.

Video

(Menu 3.2)

Use this menu to play video clips.

Playing a video file

From the file list, select the file you want. The selected

file plays.

During playback, use the following keys:

Keys Function

Centre Pauses or resumes playback.

Left Moves backward in a file.

Menu functions

Using video player options

You can use the video player options by pressing

Options

> from the video player screen.



p. 34

Using file options

From the file list, press <

Options

> to access the

following options:

•

Play

: play the selected file.

•

Create MMS

: send the file via MMS.

•

Send

: send the file via Bluetooth. You can also

send the file to the online media album.

•

Details

: access the properties of the file.

Camera

(Menu 4)

You can use the camera module embedded in your

phone to take photos and record videos.

To access this menu, press <

> in Idle mode and

select

Camera

, or press and hold

[

]

Taking a photo

You can take photos in various modes using the

phone. The camera produces JPG photos.

1. Access the

Camera

menu to turn on the camera.

The image to be captured appears on the display.

2. Adjust the image by rotating the camera lens and

aiming it at the subject.

Right Skips forward in a file.

/ Adjusts the volume.

Keys Function

• Do not take photos of people without their permission.

• Do not take photos in a place where cameras are

not allowed.

• Do not take photos in a place where you may

interfere with another person’s privacy.

When you take a photo in direct sunlight or in bright

conditions, shadows may appear on the photo.

Menu functions

Camera

(Menu 4)

• Press the left soft key to access the camera

options. See the next section.

• Use the keypad to change the camera settings

or switch to other modes.



p. 38

3. Press [

Centre]

to take a photo. The photo is saved

in the

Pictures

folder.

Using camera options in Capture mode

In Capture mode, press the left soft key to access the

following options:

•

Shooting mode

: take a photo in the following

modes:

Single shot

: take a photo in normal mode.

Multi shot

: take a series of action stills. You can

select the number of still images the camera will

take.

Mosaic shot

: take several stills and save them in

one frame. You can select the layout.

•

Effects

: change the colour tone or apply a special

effect to photos to be taken in normal mode.

•

Frames

: apply a decorative frame.

•

Flash

: set the flash setting.

•

Timer

: set a time delay before the camera takes a

photo.

•

Brightness

: display the brightness control bar.

•

Record video

: switch to Record mode.

•

Zoom

: display the zoom control bar.

•

Go to Photos

: go to the

Pictures

folder.

•

Settings

: change the default settings for taking a

photo.

Size

: select an image size.

Quality

: select an image quality setting.

View finder

: select a preview mode, either Full

screen mode or Standard ratio mode.

Shutter sound

: select the sound that you hear

when you press the shutter release, [

] or

[Centre]

To Press

use photo options <

Options



p. 38

delete the photo [

] and then <

Yes

return to Capture mode <

Preview

Menu functions

•

Short cuts

: view the functions of the keys you can

use.

Using the keypad in Capture mode

You can use the keypad to customise your camera

settings in Capture mode.

Using photo options

After saving a photo, press <

Options

> to access the

following options:

•

Take picture

: return to Capture mode.

•

Create message

: send the photo via MMS or

postcard.

•

Delete

: delete the photo.

•

Set as

: set the photo as your wallpaper for the

displays or as a caller ID image for a Contacts

entry.

Key Function

Flips the image vertically.

Shows the mirror image.

Up/Down Zooms in or out.

/Right Switches to Record mode.



p. 39

Changes the image size.

Changes the image quality.

Changes the shooting mode and the

number of photos for multi shots.

Changes the colour tone or applies a

special effect to the photo.

Reduces the distortion on the image to

maximise detail and sharpness.

Selects a decorative frame.

Sets the timer.

Goes to the

Pictures

folder.

Set the flash setting.

Changes the preview screen.

Key Function

Menu functions

Camera

(Menu 4)

•

Rename

: change the name of the photo.

•

Send

: send the photo via Bluetooth. You can also

send the file to the online media album.

•

Go to Pictures

: go to the

Pictures

folder.

•

Lock

Unlock

: lock the photo to prevent it from

being deleted, or unlock the file.

•

Details

: access the file properties.

Recording a video

You can record a video of what is displayed on the

camera screen and save it.

1. In Capture mode, press [

2. Adjust the image by rotating the camera lens and

aiming it at the subject.

• Press the left soft key to access the camera

options. See the next section.

• Use the keypad to change the camera settings

or switch to other modes.



p. 40

3. Press [

Centre]

to start recording.

4. Press [

Centre]

or the right soft key to stop

recording. The video is automatically saved in the

Videos

folder.

Using camera options in Record mode

In Record mode, press the left soft key to access the

following options:

•

Record video

: start recording.

•

Take picture

: switch to Capture mode.

•

Effects

: change the colour tone or apply a special

effect to a video.

•

Flash

: set the flash setting.

•

Timer

: set a time delay before the camera starts

recording.

To Press

play back the video clip [Centre].

use the video options <

Options



p. 41

delete the video clip [

] and then <

Yes

return to Record mode <

Preview

Menu functions

•

Brightness

: display the brightness control bar.

•

Zoom

: display the zoom control bar.

•

Go to Videos

: go to the

Videos

folder.

•

Settings

: change the following settings for

recording a video:

Recording mode

: select a video recording mode.

Select

Normal

to record a video within the limit of

the currently available memory.

Select

Limit for

MMS

to record a video suitable

for an MMS or e-mail message. The video clip is

saved in 3GP format.

Size

: select a frame size.

Quality

: select an image quality setting.

View finder

: select a preview mode, either Full

screen mode or Standard Ratio mode.

Audio record

: turn the audio on or off.

•

Short cuts

: view the functions of the keys you can

use.

Using the keypad in Record mode

You can use the keypad to customise your camera

settings in Record mode:

Keys Function

Flips the image vertically.

Shows the mirror image.

Up/Down Zooms in or out.

/Left Switches to Capture mode.



p. 36

Changes the frame size.

Changes the image quality.

Changes the video recording mode.

Changes the colour tone or applies a

special effect to the photo.

Reduces the distortion on the image to

maximise detail and sharpness.

Mutes or unmutes the audio.

Sets the timer.

Menu functions

Messaging

(Menu 5)

Using video options

After saving a video clip, press <

Options

> to access

the following options:

•

Play

: playback the video.

•

Record another

: return to Record mode.

•

Create MMS

: send the file via MMS.

•

Delete

: delete the video clip.

•

Set as wallpaper

: set the video clip, if saved for

adding it to MMS messages or e-mails, as your

wallpaper for the idle screen.

•

Rename

: change the name of the video clip.

•

Send

: send the video clip via Bluetooth. You can

also send the file to the online media album.

•

Go to Videos

: go to the

Videos

folder.

•

Details

: access the file properties.

Messaging

(Menu 5)

Use the

Messaging

menu to send and receive text

messages, multimedia messages, postcards, and

e-mails. You can also use push message, and cell

broadcast message features.

To access this menu, press <

> in Idle mode and

select

Messaging

Create

(Menu 5.1)

Use this menu to create and send SMS, MMS,

postcards, or e-mail messages.

MMS

(Menu 5.1.1)

Multimedia Message Service (MMS) delivers messages

containing a combination of text, image, video, and

audio, from phone to phone or from phone to e-mail.

1. Enter the message text.

2. Add text or subject, or media files by pressing

Options

> to access the following options:

Goes to the

Video clips

folder.

Determines the flash use.

Changes the preview screen.

Keys Function

Menu functions

•

Add item

Create item

: add text or media

files.

•

Add subject

: add a message subject.

•

Insert entry

: retrieve a template, contact

entry, or bookmark.

•

Attach details

: add your name card or a

calendar memo.

•

Page duration

: set the page duration.

•

Change picture

Change video

Change

sound

: change the picture, video, or sound to

another one.

•

Remove subject

Remove picture

Remove

text

Remove video

Remove sound

: clear

the subject, image, text, or sound.

3. When you have finished, press <

Options

> and

select

Send

4. Enter a phone number or e-mail address.

To send the message to more than one recipient,

press [Down] and fill in additional destination

fields.

5. Press <

Options

> and select

Send

SMS

(Menu 5.1.2)

Short Message Service (SMS) allows you to send or

receive text messages that may include icons,

animated images, and melodies.

1. Enter your message.

2. Add media files or calendar memo by pressing

Options

> to access the following options:

•

Insert entry

: retrieve a template, contact

entry, or bookmark.

•

Attach details

: add a name card or a calendar

memo.

•

Add

: add an icon, animated image, or melody.

The maximum size allowed for an MMS

message can differ depending on the country.

If you cannot attach another file, add another

page.

The maximum number of characters allowed in a text

message varies by Vodafone. If your message exceeds

the maximum number of characters, the phone will

split the message.

Menu functions

Messaging

(Menu 5)

3. When you have finished, press <

Options

> and

select

Send

4. Enter a destination number.

To send the message to more than one recipient,

press [Down] and fill in additional destination

fields.

5. Press <

Options

> and select

Send

to send the

message.

Postcard

(Menu 5.1.3)

You can send photos as a postcard along with simple

greeting.

1. Enter message text.

2. Add an image or text by pressing <

Options

> to

access the following options:

•

Add picture

Take picture

: add an image.

•

Insert template

: retrieve a message

template.

•

Change picture

: change the image to another

one.

•

Remove picture

: remove the added image.

3. When you have finished, press <

Options

> and

select

Send

4. Specify the recipient’s information: Name,

Additional info, Street, City, Postal code, State/

Province, and Country.

5. Press <

Options

> and select

Send

to send the

postcard.

(Menu 5.1.4)

You can send e-mails that include text, audio, and

images. To use this feature, you need to subscribe to

an e-mail service and set up your e-mail account and

profile.



p. 53

1. Enter the e-mail text.

2. Add media files, name cards, or calendar memos

by pressing <

Options

> to access the following

options:

•

Attach item

Create item

: add media files.

•

Add subject

: add e-mail subject.

•

Remove subject

: remove the subject.

•

Insert entry

: retrieve a text template, contact

entry, or bookmark.

Menu functions

•

Attach detail

: add a name card or calendar

memo.

•

View attach

: open the attached file.

•

Remove attach

: remove the attached file.

•

Remove all attach

: remove all attachments.

3. When you have finished, press <

Options

> and

select

Send

4. Enter an e-mail address.

To send the e-mail to more than one recipient,

press [Down] and fill in additional destination

fields.

5. Press <

Options

> and select

Send

to send the

e-mail.

Inbox

(Menu 5.2)

This folder stores all types of messages you have

received, except for e-mails. MMS, SMS, voicemail,

push messages from the web server, configuration

messages, and delivery report messages are stored

here.

Configuration messages, which are sent from

Vodafone, contains network parameters to let you

easily apply the network settings to your phone.

Viewing a message

On the message list, the following icons are available,

depending on the message type.

• SMS • MMS

• MMS notification • ??? Configuration

• Push • Broadcast

• Delivery report • ??? Voicemail

• According to the DRM (Digital Rights Management)

system, messages having web

content may not be

able to be forwarded. They are indicated by .

• A

icon next to a message means that a

message is of high priority. A grey-coloured

message icon is of low priority.

Menu functions

Messaging

(Menu 5)

While viewing the message list, press <

Options

> to

access the following options:

•

View

: open the message. For MMS notifications,

you can access the message properties.

•

Retrieve

: retrieve the MMS message from the

server.

•

Reply via

: send a reply to the sender via SMS or

MMS.

•

Forward

: send the message to other people.

•

Send to media album

: send the message to the

online media album.

•

Delete

: delete the message.

•

Move to archive

: move the selected message or

all messages to the

Message archive

folder.

•

Move to

: move the message between the SIM

card and the phone’s memory.

•

Sort by

: change the sort order of the list.

•

Lock

Unlock

: lock the message to prevent it from

being deleted, or unlock the message.

•

Details

: access the message properties.

Using message options

While viewing a message, press <

Options

> to access

the following options:

SMS messages

•

Call

Go to URL

: dial the highlighted phone

number or access the highlighted web link.

•

Create

: send an e-mail to the highlighted e-mail

address.

•

Reply via

: send a reply to the sender via SMS or

MMS.

•

Forward

: forward the message to other people.

•

Delete

: delete the message.

•

Move to archive

: move the messages to the

Message archive

folder.

•

Move to phone

Move to SIM

: move the

message between the SIM card and the phone’s

memory.

•

Save to

: extract URLs, e-mail addresses, or phone

numbers from the message.

Options may vary depending on your country or service

provider.

Menu functions

•

Save media items

: save media content from the

message into your phone’s memory.

•

Lock

Unlock

: lock the message to prevent it from

being deleted, or unlock the message.

MMS notifications

messages

•

Retrieve

: retrieve the MMS message from the

server.

•

Call

Go to URL

: dial the highlighted phone

number or access the highlighted web link.

•

Create

: send an e-mail to the highlighted e-mail

address.

•

Reply via MMS to

: send a reply message via

MMS.

•

Reply via SMS

: send a reply message via SMS.

•

Forward

: forward the message to other people.

•

Send to media album

: send the message to the

online media album.

•

Activate key

: get a new license key when the key

for the selected DRM file expires.

•

Reactivate key

: get another license key even

when the key for the selected DRM file has not

expired.

•

Delete

: delete the message or all messages.

•

Move to archive

: move the message to the

Message archive

folder.

•

Save media items

: save media content from the

message into your phone’s memory.

•

Save to

: extract URLs, e-mail addresses, or phone

numbers from the message.

•

Lock

Unlock

: lock the message to prevent it from

being deleted, or unlock the message.

•

Details

: access the message properties.

Configuration messages

•

Install

: apply the configuration specified in the

message to your phone.

•

Delete

: delete the message.

Push messages

•

Go to URL

: connect to the URL specified in the

message.

Menu functions

Messaging

(Menu 5)

•

Delete

: delete the message.

•

Save to

: extract URLs, e-mail addresses, or phone

numbers from the message.

•

Move to archive

: move the message to the

Message archive

folder.

•

Lock

Unlock

: lock the message to prevent it from

being deleted, or unlock the message.

CB messages

•

Save

: save the message to the phone’s memory.

•

Delete

: delete the message.

•

Save to

: extract URLs, e-mail addresses, or phone

numbers from the message.

Delivery report messages

•

Delete

: delete the message.

•

Save to

: extract URLs, e-mail addresses, or phone

numbers from the message.

•

Move to archive

: move the message to the

Message archive

folder.

•

Lock

Unlock

: lock the message to prevent it from

being deleted, or unlock the message.

Email box

(Menu 5.3)

This folder stores e-mails that you have received.

Viewing received e-mails

1. Select an e-mail account.

2. Press <

Options

> and select

Download

to get

new e-mails from the server.

The phone checks for new e-mails and retrieves

received e-mails.

The following icons may appear on the message

list; depending on the e-mail status, icons may

vary:

• has not been read

• has been retrieved from the server

• has not been retrieved; indicates that

an e-mail is being retrieved from the

server and indicates that an e-mail has

failed to retrieve.

3. Scroll to an e-mail or header and press [Centre].

icon next to a message means that a

message is of high priority. A grey-coloured

message icon is of low priority.

Menu functions

4. If the e-mail has more than one page, press [ / ]

to scroll through pages one by one.

Press [Left] or [Right] to move to the first or last

page.

5. Select an attached file to view or play it.

Using e-mail options

While viewing the e-mail content or e-mail list, press

Options

> to access the following options:

•

View

: open the selected item.

•

Check E-mail

: retrieve new e-mails from the

server.

•

Retrieve

: retrieve one or all of the e-mails from

the e-mail server.

•

Reply to sender

: send a reply to the sender.

•

Reply to all

: send a reply to all recipients.

•

Forward

: forward the e-mail to other people.

•

Download

: retrieve new e-mails or headers from

the e-mail server.

•

Delete

: delete the currently selected item.

•

Block

: add the sender’s e-mail address or e-mail

subject to the Block list.

•

Save to

: extract URLs, e-mail addresses, or phone

numbers from the e-mail.

•

Save media items

: save media content from the

message to your phone’s e-mail.

•

Move to archive

: move the e-mail to the

Message archive

folder.

•

Sort by

: change the sort order of the list

•

Lock

Unlock

: lock the e-mail to prevent it from

being deleted, or unlock the e-mail.

•

Details

: access the e-mail properties.

Drafts

(Menu 5.4)

This folder stores messages you have saved to send at

a later time while creating messages or have tried to

send.

Press <

Options

> to access the following options:

•

View

: open the selected message.

Options may vary depending on the status of the

e-mail.

Menu functions

Messaging

(Menu 5)

•

Edit

: edit the message.

•

Forward

: send the message to other people.

•

Send

Send again

: resend the message.

•

Delete

: delete the message or all messages.

•

Move to archive

: move the selected message or

all messages to the

Message archive

folder.

•

Sort by

: change the sort order of the list.

•

Lock

Unlock

: lock the message to prevent it from

being deleted, or unlock the message.

•

Details

: access the message properties.

Sent messages

(Menu 5.5)

This folder stores messages that you have sent.

While viewing a message or from the message list,

press <

Options

> to access the following options:

•

View

: open the message.

•

Forward

: forward the message to other people.

•

Save to

: extract URLs, e-mail addresses, or phone

numbers from the message.

•

Move to phone

Move to SIM

: move the

message between the SIM card and the phone’s

memory.

•

Delete

: delete the message or all messages.

•

Move to archive

: move the selected message or

all messages to the

Message archive

folder.

•

Sort by

: change the sort order of the list.

•

Lock

Unlock

: lock the message to prevent it from

being deleted, or unlock the message.

•

Details

: access the message properties.

Voicemail

(Menu 5.6)

Use this menu to access the voicemails you have

received.

Message archive

(Menu 5.7)

Use this menu to save the message you have saved in

this folder while reading a message.

You can use the message options by pressing

Options

> from the message list. Refer to “Sent

messages.”

Menu functions

Templates

(Menu 5.8)

Use this menu to create, edit, and send text templates

and MMS templates.

MMS templates

(Menu 5.8.1)

When you access this menu, you can view the list of

templates you have saved.

From the template list, press <

Options

> to access

the following options:

•

View

: open the template.

•

Edit

: change the selected template.

•

Send

send the template as an MMS message.

•

Delete

: delete the template.

SMS templates

(Menu 5.8.2)

Use this menu to preset frequently used messages.

Select an empty location and enter the message text.

From the text template list, press <

Options

> to

access the following options:

•

Edit

: change the selected template.

•

Send

send the template as an SMS message.

•

Add new

: add a new template.

•

Delete

: delete the template.

Delete all

(Menu 5.9)

Use this menu to delete all messages in each message

folder at once.

1. Press [Centre] to check the message box(es) you

want.

2. Press <

Delete

3. If you want to delete the protected messages,

press [Centre].

4. Press <

Yes

> to confirm the deletion.

Messaging settings

(Menu 5.0)

Use this menu to set up various options.

MMS

(Menu 5.0.1)

You can configure default MMS settings.

•

Send settings

: set up the following options for

sending a multimedia message:

Menu functions

Messaging

(Menu 5)

Delivery report

: set the network to inform you

when your message has been delivered.

Address hiding

: set your address to be hidden

from the recipient’s phone.

Read reply

: determine whether or not the phone

sends a read-reply request.

Priority

: set the priority level of your messages.

Expiry date

: set the length of time your messages

are stored in the message centre.

Delivery time

: set a time delay before messages

are sent.

Send size

: select a maximum size of attached

items allowed for an MMS message.

•

Retrieve settings

: set up the following options

for receiving a multimedia message:

Anonymous reject

: reject messages from

unknown senders.

Advert allowed

: accept advertisements.

Information allowed

: accept information

messages.

Personal allowed

: accept personal messages.

Report allowed

: send a delivery report from the

network to the sender.

Home reception

: determine if your phone

retrieves new messages automatically when you

are in your home service area.

Roaming reception

: determine if your phone

retrieves new messages automatically when you

are roaming in another network.

Home reception and Roaming reception have the

following options:

Automatic

: the phone automatically retrieves

messages from the server.

Reject

: the phone rejects all messages.

Manual

: the phone receives notifications first

from the server. Use the

Retrieve

option to

manually download new messages.

•

MMS profile

: select a connection profile to be

used for sending and receiving MMS messages.

You can also make or edit a profile.



p. 86

You cannot change MMS profile settings while an

MMS message is sent or retrieved.

Menu functions

SMS

(Menu 5.0.2)

You can configure default SMS settings.

•

Send settings

: set up the following options for

sending a text message:

Reply path

: allow the recipient to reply to you

through your message centre.

Delivery report

: set the network to inform you

when your message has been delivered.

Character support

: select a character encoding

type. If you select

Automatic

, the phone switches

the encoding type from

GSM-alphabet

Uni-

code

if you enter an

Uni-code

character. Use of

Uni-code

encoding will reduce the maximum

number of characters in a message to about half.

If this menu is not shown, your phone provides the

Automatic

character encoding by default.

Bearer selection

: select either

GSM

GPRS

preferred

, depending on your network.

•

Common profile

: select a profile.

•

Profile settings

: set the following properties in a

profile:

Service centre

: store or change the number of

your message centre.

Default destination

: enter the default

destination. It will be displayed in the first field on

the Recipients field.

Default type

: set the default message type. The

network can convert the messages into the

selected format.

Default validity

: set the length of time your

messages are stored in the SMS centre while

attempts are made to deliver them.

Setting name

: enter a profile name.

(Menu 5.0.3)

You can configure default e-mil settings.

•

Send settings

: set up the following options for

sending an e-mail:

Delivery receipt

: set the network to inform you

when your e-mail has been delivered.

You cannot change e-mail profile settings while an

e-mail is being sent or retrieved.

Menu functions

Messaging

(Menu 5)

Read receipt

: set the network to send a request

for a reply along with your e-mail to the recipient.

Priority

: select the priority level of your e-mail.

Include signature

: attach your name, phone

number, a simple memo, or a tag line to your

e-mail.

Edit name

: edit the name in your signature.

Edit telephone number

: edit the phone number

in your signature.

Edit note

: edit the tag line in your signature.

•

Receive settings

: set up the following options for

receiving an e-mail:

Check interval

: determine how often the phone

checks the server for incoming e-mails.

If you set this option to

Not used

, you can use the

Check new Email

feature to check your e-mail

manually.

Read reply

: determine whether or not the phone

sends a read-reply request.

When this option is set to

If requested

, the phone

reminds you to send a read-reply request with

your e-mail address.

Reject if over

: determine the maximum size for

incoming e-mails. Your phone will reject

e-mails that exceed the specified size.

Download method

: set the phone to retrieve

headers only or bodies of e-mails from the server.

Leave a copy of messages on the server

: leave

copies of e-mails after retrieving.

•

Block list

: specify e-mail addresses or subjects to

reject messages from the address or containing

the subjects.

•

Email account

: set up an e-mail account and

select an account to be used.

Current account

: select an account.

Account settings

: configure up to five e-mail

accounts using different e-mail servers. The

following options are available for each account:

Account name

: enter a name for the currently

selected account.

User name

: enter a user name.

Email address

: enter your e-mail address.

User ID

: enter your e-mail ID.

Menu functions

Password

: enter your e-mail password.

SMTP authentication: same as POP3

: select if

you want the SMTP server to have the same

parameters as the POP3.

SMTP server

: enter the SMTP server name.

SMTP port

: enter the SMTP port number.

SMTP ID

: enter the SMTP user name.

SMTP password

: enter the SMTP password.

SMTP server

: enter the IP address or domain

name of the outgoing e-mail server.

SMTP port

: enter the SMTP port number.

Protocol type

: select the protocol for the

incoming e-mail server. The remaining options

depend on the protocol type setting.

When the protocol type is

POP3

POP3 server

enter the IP address or domain

name of the server that receives your e-mail.

POP3 port

: enter the POP3 port number.

APOP login

: connect to the server by using the

APOP login scheme when this option is selected.

When the protocol type is

IMAP4

IMAP4 server

: enter the IP address or domain

name of the server that receives your e-mail.

IMAP4 port

: enter the IMAP4 port number.

Include attachments

: select this option to

receive attachments with e-mails.

Max retrieve Email

: set the number of headers

you will retrieve from the server.

Secured connection

: set whether or not you

use the secured connection mode.

•

Email profile

: select a network connection profile

to be used for sending and receiving e-mails. You

can also make or edit a profile.



p. 86

•

Vodafone mail setting

: access the Vodafone mail

settings.

•

About Email

: access the product name, vendor,

version, and features information of the e-mail

service.

Menu functions

Messaging

(Menu 5)

Push message

(Menu 5.0.4)

You can change the settings for receiving push

messages from the wireless web server. The following

options are available:

•

Receive

: set how your phone receives push

messages.

•

Service centre

: enter the address of the server

from which you want to receive push messages.

Broadcast

(Menu 5.0.5)

You can change the settings for receiving CB

messages. The following options are available:

•

Receive

: select the reception of CB messages.

•

Channel list

: indicate the channels from which

you wish to receive CB messages. Please contact

your service provider for further details.

•

Language

: select the preferred language in which

broadcast messages display.

Set voicemail number

(Menu 5.0.6)

Use this menu to store the number of the voice mail

server and access your voice mails.

•

Connect to voice server

: connect to the voice

mail server to allow you to listen to your

messages.

•

Voice server number

: enter the voice mail

server number.

Memory status

(Menu 5. )

Use this menu to view the maximum memory and

available memory for each message type. You can also

view the memory currently in use in each folder.

Media album

(Menu 5. )

Use this menu to access the

Media Album

service,

with which you can organise your own online media

album, adding media content and messages via the

wireless web. This menu is only available if supported

by your service provider.

You must enter the voice server number before you can

access your voice mails. Your service provider can give

the voice server number.

Menu functions

My files

(Menu 6)

The

My files

menu allows you to access images,

videos, music files, and sound files stored in the

phone’s memory.

To access this menu, press <

> in Idle mode and

select

My files

Pictures

This menu displays photos you have taken and images

downloaded or received in messages.

Viewing an image

1. Select an image.

2. Press [Left] or [Right] to scroll to other images.

Using image options

While viewing an image, press <

Options

> to access

the following options:

•

Create message

: send the file via MMS or

postcard.

•

Delete

: delete the selected file.

•

Set as

: set the image as your wallpaper for the

display or a caller ID image for a Contacts entry.

•

Rename

: change the name of the file.

•

Edit

: edit the image and save it as a different file.

•

Send

: send the file via Bluetooth. You can also

send the file to the online media album.

•

Lock

Unlock

: lock the file to prevent it from being

deleted, or unlock the file.

•

Activate key

: get a new license key when the key

for the selected DRM file expires.

•

Reactivate key

: get another license key even

when the key for the selected DRM file has not

expired.

•

Details

: access the file properties.

•

Share via Bluetooth

: share the file(s) with other

Bluetooth devices, or hide the file(s) so that other

Bluetooth devices cannot access it.

According to the DRM (Digital Rights Management)

system, web content may not be able to be forwarded.

The content is indicated by .

Menu functions

My files

(Menu 6)

•

: print the selected photo by connecting the

phone to a printer via Bluetooth.

Downloading images

1. Select

More pictures

. You are connected to a

preset website.

2. Search for an image and follow the onscreen

instructions to download it.

Videos

This menu displays video clips you have recorded,

downloaded, or received in messages.

Playing a video clip

Select the video clip you want.



p. 35

Using video options

While viewing the video list, press <

Options

> to

access the options.

•

Play

: play the file.

•

Create MMS

: send the file via MMS.

•

Delete

: delete the selected file or all file.

•

Set as wallpaper

: (for 3pg files) set the image as

your wallpaper.

•

Record video

: switch to Record mode.

•

Rename

: change the name of the file.

•

Send

: send the file via Bluetooth. You can also

send the file to the online media album.

•

Lock

Unlock

: lock the photo to prevent it from

being deleted, or unlock the file.

•

Activate key

: get a new license key when the key

for the selected DRM file expires.

•

Reactivate key

: get another license key even

when the key for the selected DRM file has not

expired.

•

Details

: access the file properties.

•

Visible to Bluetooth

: share the file(s) with other

Bluetooth devices, or hide the file(s) so that other

Bluetooth devices cannot access it.

Video clips recorded on other devices, such as

camcorders, may not play correctly.

Menu functions

Music

This menu displays MP3 files you have downloaded,

received in messages, or imported from your

computer.

Playing a music file

Scroll to a file and press [Centre].



p. 34

Using music options

While viewing the music list, press <

Options

> to

access the following options:

•

Play

: begin playback.

•

Add to playlist

: add a file to the play list.

•

Create MMS

: send the file via MMS.

•

Delete

: delete the selected file or all files.

•

Set as

: set the file as your ringtone or as a caller

alert melody for a Contacts entry.

•

Rename

: change the name of the file.

•

Send

: send the file via Bluetooth. You can also

send the file to the online media album.

•

Lock

Unlock

: lock the file to prevent it from being

deleted, or unlock the file.

•

Activate key

: get a new license key when the key

for the selected DRM file expires.

•

Reactivate key

: get another license key even

when the key for the selected DRM file has not

expired.

•

Details

: access the file properties.

•

Visible to Bluetooth

: share the file(s) with other

Bluetooth devices, or hide the file(s) so that other

Bluetooth devices cannot access it.

Downloading music files

1. Select

More music

2. Search for a music file and follow the onscreen

instructions to download it.

Ringtones

This menu displays sound files you have recorded,

downloaded, or received in messages.

Playing a sound clip

Scroll to a clip and press [Centre].

Menu functions

My files

(Menu 6)

During playback, your can use the following keys:

Using sound options

During playback, press <

Options

> to access the

following options:

•

Play

: play the sound file.

•

Create MMS

: send the file via MMS.

•

Delete

: delete the selected file or all files.

•

Set as

: set the file as your ringtone or as a caller

ID ringer for a Contacts entry.

•

Rename

: change the name of the file.

•

Send

: send the file via Bluetooth. You can also

send the file to the online media album.

•

Lock

Unlock

: lock the photo to prevent it from

being deleted, or unlock the file.

•

Activate key

: get a new license key when the key

for the selected DRM file expires.

•

Reactivate key

: get another license key even

when the key for the selected DRM file has not

expired.

•

Details

: access the file properties.

•

Share via Bluetooth

: share the file(s) with other

Bluetooth devices, or hide the file(s) so that other

Bluetooth devices cannot access it.

Downloading ringtones

1. Select

More ringtones

2. Search for a ringtones and follow the onscreen

instructions to download it.

Games

Use this menu to download Java games and play

them.



p. 32

Keys Description

Up/Down/

/Adjusts the volume.

Left Goes to the previous file.

Right Skips to the next file.

Centre Access the option list.

Menu functions

Applications

Use this menu to download Java MIDlets (Java

applications running on mobile phones).



p. 32

Themes

Use this menu to view the theme images you have

downloaded, or received in messages. You can also set

an image as your theme.

Changing a theme

1. Select an image.

2. Press <

Set

Using image options

While viewing the file list, press <

Options

> to access

the following options:

•

Set (Apply) Theme

: set the file as your theme.

•

Delete

: delete the selected file or all files.

•

Rename

: change the name of the file.

•

Send

: send the file via Bluetooth. You can also

send the file to the online media album.

•

Lock

Unlock

: lock the file to prevent it from being

deleted, or unlock the file.

•

Activate key

: get a new license key when the key

for the selected DRM file expires.

•

Reactivate key

: get another license key even

when the key for the selected DRM file has not

expired.

•

Details

: access the file properties.

•

Share via Bluetooth

: share the file(s) with other

Bluetooth devices, or hide the file(s) so that other

Bluetooth devices cannot access it.

Downloading theme images

1. Select

More themes

2. Search for a theme and follow the onscreen

instructions to download it.

Other documents

Use this menu to view the document files stored in

your phone.

While viewing the file list, press <

Options

> to access

the following options:

Menu functions

Organiser&Tools

(Menu 7)

•

View

: open the selected file.

•

Delete

: delete the selected file or all files.

•

Rename

: change the name of the file.

•

Send

: send the file via Bluetooth. You can also

send the file to the online media album.

•

Lock

Unlock

: lock the file to prevent it from being

deleted, or unlock the file.

•

Activate key

: get a new license key when the key

for the selected DRM file expires.

•

Reactivate key

: get another license key even

when the key for the selected DRM file has not

expired.

•

Details

: access the file properties.

•

Share via Bluetooth

: share the file(s) with other

Bluetooth devices, or hide the file(s) so that other

Bluetooth devices cannot access it.

Memory status

You can check the total amount of memory for media

items and the amount of memory currently in use in

each media box.

Organiser&Tools

(Menu 7)

The Organiser&Tools feature enables you to keep track

of your schedule and to-do list, to view missed alarm

events, and to make a memo. You can record a voice

memo, set time zone, or use the phone as a calculator,

converter, timer, or stopwatch.

To access this menu, press <

> in Idle mode and

select

Organiser&Tools

Vodafone

(Menu 7.1)

This menu is available if you use a SIM card that

supports SIM Application Tool Kit menus and provides

additional services, such as news, weather, sports,

entertainment, and location services. Available

services may vary, depending on your service

provider’s plans.

For details, see your SIM card instructions or contact

your service provider.

Menu functions

Applications

(Menu 7.2)

Use this menu to download Java games and

applications and play them.



p. 32

Alarms

(Menu 7.3)

Use this menu to set alarms to sound at specific times.

Setting an alarm

1. Select the type of alarm.

2. Scroll to

on the

Alarm

line and press [Down].

3. Enter the time for the alarm to sound and press

[Down].

4. Select

in 12-hour time format and press

[Down].

5. Select a repeat option from the

Repeat

line.

6. Select the

Alarm tone

line and select an alarm

melody.

7. Select tone volume from the

Tone volume

line.

8. Press <

Save

Stopping an alarm

When an alarm sounds, choose either of the following

options to stop the alarm:

• Press any key to confirm the alarm.

• Press <

Snooze

> to stop the wake-up alarm for 5

minutes. You can also this a maximum of 5 times.

Setting the alarm to ring even if the phone is

off

From the Alarm screen, select

Auto power

→

If the phone is off when it is time for the alarm to ring,

the phone is switched on and sounds the alarm.

Calendar

(Menu 7.4)

Use this menu to keep track of your monthly schedule.

Consulting the calendar

When you enter the

Calendar

menu, the calendar in

Week view appears with the timetable.

A cell on the timetable indicates the presence of event

information.

Menu functions

Organiser&Tools

(Menu 7)

Press <

Options

> to access the following options:

•

View mode

: change the view mode of the

calendar.

•

Create

: add a new event.

•

Go to

: go to the current date or the specific date.

•

Missed alarm events

: view events whose alarms

you have missed.

•

Sort by

: sort items by the type of event.

•

Delete

: delete item(s) stored on the calendar by

using various deleting options.

Entering a new scheduled event

1. Scroll to a date on the calendar.

2. Press <

Options

> and select

Create

→

Schedule

3. Enter information or change the settings in the

following entry fields:

•

Subject

: enter the title of the event.

•

Details

: enter event details.

•

Start date

and

Start time

: enter the starting

date and time for the event.

•

AM/PM

: select

in 12-hour time

format.

•

End date

and

End time

: enter the ending date

and time for the event.

•

AM/PM

: select

in 12-hour time

format.

•

Location

: enter information about the event

location.

•

Alarm

: select to set an alarm for the event, set

the time for the alarm, and select an alarm

tone.

•

Repeat

: select to set the event to recur. You

can select a repeat unit and set the date to end

repeating.

4. Press <

Save

> to save the event.

Entering a new anniversary

1. Scroll to a date on the calendar.

2. Press <

Options

> and select

Create

→

Anniversary

3. Enter information or change the settings in the

following entry fields:

•

Occasion

: enter information about the

anniversary.

Menu functions

•

Date

: enter the date.

•

Alarm

: select to set an alarm for the

anniversary. You can set the number of days

before the event date and the time for the

alarm to sound. You can also set the time for

the alarm and select an alarm tone.

•

Repeat every year

: select to set the phone to

remind you of the anniversary every year.

4. Press <

Save

> to save the event.

Entering a memo

1. Scroll to a date on the calendar.

2. Press <

Options

> and select

Create

→

Memo

3. Enter a memo and press <

Save

Entering a to-do item

1. Scroll to a date on the calendar.

2. Press <

Options

> and select

Create

→

To do

3. Enter information or change the settings in the

following entry fields:

•

To do

: enter information about the item.

•

Start date

: enter the starting date.

•

Due date

: enter the ending date.

•

Select priority

: select a priority level.

4. Press <

Save

> to save the event.

Viewing an event

1. Select a date on the calendar to display the events

for the day.

2. Select an event to view its details.

While viewing the event list, press <

Options

> to

access the following options:

•

View

: display the event details.

•

Create

: add a new event.

•

Create message

: send the event via MMS or

SMS.

•

Send

: send the event via Bluetooth or infrared

port.

•

View mode

: change the view mode of the

calendar.

•

Missed alarm events

: view events whose alarms

you have missed.

•

Sort by

: sort items by the type of event.

Menu functions

Organiser&Tools

(Menu 7)

•

Delete

: delete item(s) stored on the calendar by

using various deleting options.

Viewing an event in different mode

By default, the calendar appears in Week view mode.

Press <

Options

> and select

View mode

to change

the mode.

Day view

You can view events for the selected date.

Select an event to view its details.

The following icons will be displayed according to the

event’s type and status:

• Alarm set

• Recurring event

• Completed to-do

• To-do priority (Red: high, Blue: normal, and

Grey: low)

Month view

You can view events for the selected month.

The number of events for the specific day appears at

the bottom of the calendar. The following icons

indicate the type of event:

Viewing missed event alarms

When you are unable to acknowledge an alarm for a

scheduled event of anniversary, the phone stores the

missed event alarm until you confirm it.

1. From the Calendar, press <

Options

> and select

Missed event alarm

2. Select an event.

3. Press <

Confirm

> to confirm and delete the event.

Voice recorder

(Menu 7.5)

Use this menu to record voice memos. A voice memo

can be up to one hour long.

Recording a voice memo

1. Press [Centre] to start recording.

2. Speak into the microphone.

• Scheduled event • Anniversary

• To-do item • Memo

Menu functions

Press [Centre] to pause or resume the recording.

3. When you finish, press <

Stop

>. The voice memo

is saved automatically.

Playing a voice memo

1. From the Voice recorder screen, press <

Options

and select

Go to Ringtones

2. Select a voice memo. The memo plays.

On the player screen, use the following keys:

Using voice memo options

From the Voice recorder screen, press <

Options

> to

access the following options:

•

Play

: play the voice memo.

•

Record

: record a new voice memo.

•

Create MMS

: send the file via MMS.

•

Go to Ringtones

: go to the list of voice memos

you have recorded.

•

Send

: send the file via Bluetooth. You can also

send the file to the online media album.

•

Delete

: delete the file.

•

Rename

: change the name of the file.

•

Share via Bluetooth

: share the file(s) with other

Bluetooth devices, or hide the file(s) so that other

Bluetooth devices cannot access it.

•

Activate key

: get a new license key when the key

for the selected DRM file expires.

•

Reactivate key

: get another license key even

when the key for the selected DRM file has not

expired.

Keys Function

Centre Pauses or resumes playback.

Up Switches to play mode ( ) or back to

Record mode ( ).

Left Moves backward in a file.

Right Moves forward in a file.

/ Adjusts the volume.

Down Stops playback.

Menu functions

Organiser&Tools

(Menu 7)

•

Lock

Unlock

: lock the file to prevent it from being

deleted, or unlock the file.

•

Details

: access the file properties.

•

Setting

: select a recording time setting.

Limit for MMS

: record a voice memo for adding to

an MMS message.

Limit for Email

: record a voice memo for adding

to an e-mail.

Max 1 hour

: record a voice memo for up to one

hour.

World time

(Menu 7.6)

Use this menu to set your local time zone and find out

what time it is in another part of the world.

Setting your local time zone

1. From the world map, press [Left] or [Right] to

select the city that corresponds to your home time

zone. As the time line moves, the time and date of

the given zone display.

2. Press <

Options

> and select

Save

to save the

time zone.

Applying Daylight Savings Time

1. From the world map, press <

Options

> and select

Set daylight saving time

2. Press [Centre] to check the time zone(s) you want.

3. Press <

Save

PIM sync

(Menu 7.7)

Use this menu to synchronise personal data with

corresponding PC applications via the optional

WideSync programme.

To use the PIM sync feature, you first need to create a

synchronisation profile.



p. 85

Starting synchronisation

1. Make sure that your PC has MS Outlook and the

WideSync program installed, and the phone and

the PC are connected by a USB cable or an active

Bluetooth connection.

2. Open MS Outlook.

3. From the PIM sync screen, scroll to the

synchronisation method you want.

Menu functions

4. Press <

Options

> and select

Start sync

Using synchronisation options

From the PIM sync screen, press <

Options

> to access

the following options:

•

Start sync

: start a synchronisation for the

selected profile.

•

View result

: show the result of the last

synchronisation.

Calculator

(Menu 7.8)

Use this menu to perform basic arithmetic functions,

such as addition, subtraction, multiplication, and

division.

1. Enter the first number.

• Press the left soft key to insert a decimal point

or bracket.

•

Press

[] or []

to move the cursor.

2. Enter the operation for your calculation by pressing

the Navigation keys.

3. Enter the second number.

4. Press [Centre] to view the result.

Converter

(Menu 7.9)

Use this menu for common conversions, such as

currency and temperature.

1. Select a converter.

2. Press [Left] or [Right] to select the original unit

and press [Down].

3. Enter the value to be converted and press [Down].

• Press [ ] to insert a decimal point.

• Press [ ] to change the temperature to above

zero (+) or below zero (-).

4. Press [Left] or [Right] to select the unit you want

to convert to.

The equivalent value for the amount you entered

displays.

For the currency converter, you can view and set up

the rates by pressing <

View rate

Menu functions

Contacts

(Menu 8)

Timer

(Menu 7.0)

Use this menu to set a period of time for the phone to

count down. The phone will sound an alarm when the

specified period of time has expired.

Starting the timer

1. Press <

Set

2. Enter the length of time you want to count down

and press <

3. Press [Centre] to start counting down.

Stopping the timer

•Press <

Exit

> or any key when the timer rings.

• Press [Centre] on the Timer screen to stop the

timer before it rings.

Stopwatch

(Menu 7. )

Use this menu to measure elapsed time. The precision

of the stopwatch is one one-hundredth of a second.

The maximum measurement time is 10 hours.

1. Press [Centre] to start the stopwatch.

2. Press [Centre] to check an interval. You can repeat

this step for a total of 4 intervals.

3. To reset the stopwatch, press <

Reset

Memory status

(Menu 7. )

This menu displays the number of events of each type

you have created, and the total number of events you

can store.

Contacts

(Menu 8)

You can store phone numbers on your SIM card and in

your phone’s memory. The SIM card and phone’s

memory are physically separate, but they are used as

a single entity called Contacts.

To access this menu, press <

> in Idle mode and

select

Contacts

Menu functions

Contacts list

(Menu 8.1)

Use this menu to search for numbers in Contacts.

Finding an entry

1. Enter the first few letters of the name that you

want to find.

2. Select the name you want from the list.

3. Press [ ] to dial the number, or <

Options

> to

access Contacts options.

Using Contacts options

While viewing the contact list or contact details, press

Options

> to access the following options:

•

View

: display details about the contact.

•

Call

: make a voice call.

•

Create message

: send an SMS, MMS, or e-mail

message.

•

Edit

: edit the contact information.

•

Synchronise

: synchronise the contact information

with a PC.

•

Add new contact

: add a new contact to Contacts.

•

Copy to phone

Copy to SIM

: copy the contact to

the SIM card or the phone’s memory or voice

versa.

•

Send

: send the contact via SMS, MMS, Bluetooth,

or infrared port.

•

Delete

: delete the selected contact or all contacts.

Add contact

(Menu 8.2)

Use this menu to add a new contact to Contacts.

Storing a number in the phone’s memory

1. Select

Phone

2. Change the settings or enter information about the

contact.

•

First name

Last name

: assign a name.

•

Mobile

Home

Office

Fax

Other

: add a

number in any category.

•

: assign an e-mail address.

•

Caller ID

: assign an image as a caller ID

image to alert you to a call from the number.

•

Ringtones

: assign a ringtone to alert you to a

call from the number.

Menu functions

Contacts

(Menu 8)

•

Group

: assign the number to a caller group.

•

Memo

: add a memo about the person.

•

Additional info

: enter additional information

about the person.

•

Street

: enter the street name.

•

City

: enter the city name.

•

Postal code

: enter the postal code.

•

State

Province

: enter state or province

name.

•

Country

: enter the country name.

•

URL

: enter a URL address.

3. Press <

Save

> to save the contact.

Storing a number on the SIM card

1. Select

SIM

and enter a name.

2. Press [Down] and enter a phone number.

3. Press [Down] and change the location number, if

necessary.

4. Press <

Save

> to save the contact.

Groups

(Menu 8.3)

Use this menu to organise your contacts in caller

groups.

Creating a new caller group

1. Press <

Options

> and select

Add

2. Enter a name for the group.

3. Select the Caller ID line and select an image.

4. Select the Ringtones line and select a melody.

5. Press <

Save

> to save the group.

Adding members to a caller group

1. Select a group.

2. Press <

Add

>. The list of contacts stored in your

phone’s memory is displayed.

3. Press [Centre] to check the contacts you want.

4. Press <

Select

Managing caller groups

While viewing the group list, press <

Options

> to

access the following options:

•

View

: display the members of the selected group.

Menu functions

•

Add

: add a new group.

•

Edit

: change the properties of the selected group.

•

Create message

: send an SMS or MMS message

to the member(s) you want.

•

Delete

: delete the selected group or all groups.

Group members, however, are not deleted from

Contacts.

Call log

(Menu 8.4)

Use this menu to view the calls you have dialled,

received, or missed, the length of your calls, and the

cost of your calls.

All calls

(Menu 8.4.1)

This menu displays the most recent calls dialled,

received, or missed.

Accessing a call record

1. Press [Left] or [Right] to select a call type.

2. Press [Up] or [Down] to scroll through the call list.

3. Press [Centre] to view the details of a call, or [ ]

to dial a number.

Using call record option

While viewing the call list, press <

Options

> to access

the following options:

•

Detail

: access the details of the selected call.

•

Call

: dial the selected number.

•

Go to contacts

: access the contact of the selected

number.

•

Save contact

: save the number to Contacts.

•

Create message

: send an SMS or MMS message.

•

Delete

: delete the selected call record or all

records.

Missed calls

(Menu8.4.2)

This menu displays the most recent calls that you did

not answer.

Dialled calls

(Menu 8.4.3

This menu displays the most recent calls you have

dialled.

Received calls

(Menu 8.4.4)

This menu displays the most recent calls you have

received.

Menu functions

Contacts

(Menu 8)

Call time

(Menu 8.4.5)

This menu displays the time log for calls made and

received. The actual time invoiced by your service

provider will vary.

•

Last

call

time

: check the length of your last call.

•

Total

sent

: check the total length of all the calls

you have dialled.

•

Total

received

: check the total length of all the

calls you have received.

To reset the call timers, press <

Reset

Call cost

(Menu 8.4.6)

This network feature displays the cost of calls. This

menu is available only if your SIM card supports this

feature. Note that this is not intended to be used for

billing purposes.

•

Last

call

cost

: check the cost of your last call.

•

Total

cost

: check the total cost of all of your calls.

If the total cost exceeds the maximum cost set in

Set

max

cost

, you must reset the counter before

you can make another call.

•

Max

cost

: check the maximum cost limit set in

Set

max

cost

•

Reset

counters

: reset the cost counters.

•

Set

max

cost

: set the maximum cost authorised

for your calls.

•

Price/Unit

: set the price per unit that is applied

when the cost of your calls is calculated.

Data counter

(Menu 8.4.7)

Use this menu to view the amount of the last sent or

received data and the total amount of the sent or

received data. You can also reset all counters.

Speed dialing

(Menu 8.5)

Use this menu to assign a speed dial number (2 to 9)

for eight of your most frequently called numbers.

Assigning speed dial numbers

1. Select a key location from

. Key [

] is

reserved for your voice mail server.

2. Select a contact you want from the contact list.

The password is preset to

00000000

. You can change

this password.



p. 87

Menu functions

3. Scroll to a number, if it has more than one number.

4. Press <

Select

Managing speed dial entries

From the Speed dial screen, press <

Options

> to

access the following options:

•

Add

: assign a number to an unassigned key.

•

View

: show the number assigned to the key.

•

Change

: assign a different number to the

assigned key.

•

Remove

: clear the speed dial setting.

Dialling speed dial entries

Press and hold the appropriate key in Idle mode.

My contact details

(Menu 8.6)

Use this menu to create a name card and send it to

other people.

Saving your name card

The procedure for creating your name card is the

same as the one for saving a phone number in the

phone’s memory.



p. 70

Using name card options

After saving your name card, press <

Options

> to

access the following options:

•

Edit

: edit the name card.

•

Send

: send the name card via SMS, MMS,

Bluetooth, or infrared port.

•

Exchange contact details

: exchange name cards

with another person via Bluetooth.

•

Remove

: delete the name card.

My numbers

(Menu 8.7)

Use this feature to check your phone numbers, or to

assign a name to each of the numbers. Changes made

here do not affect the actual subscriber numbers on

your SIM card.

Settings

(Menu 8.8)

Use this menu to manage Contacts.

•

Save new contacts to

: select a default memory

location to save contacts.

Menu functions

Settings

(Menu 9)

If you select

Ask each time

, the phone will ask

you to select a memory location when saving a

number.

•

Copy all to phone

: copy all of the contacts stored

on the SIM card to the phone’s memory.

•

Copy all to SIM

: copy all of the contacts stored in

the phone’s memory to the SIM cord.

•

Delete all

: delete all of the contacts from your

phone’s memory, your SIM card, or both.

1.Press [Centre] to check the location(s) to be

cleared.

2.Press <

Delete

3.Enter the phone password and press <

4.Press <

Yes

> again to confirm the deletion.

•

Memory status

: display the number of contacts

you have stored in Contacts.

Service number

(Menu 8.9)

This menu is available if your SIM card supports

Service Dialling Numbers (SDN). Use this menu to

view the list of SDNs assigned by your service

provider, including emergency numbers, directory

enquiries, and voice mail numbers.

1. Scroll to the number you want and press <

View

2. Press <

Dial

> or [ ].

Settings

(Menu 9)

Use this menu to customise your phone settings. You

can also reset the settings to their default values.

To access this menu, press <

> in Idle mode and

select

Settings

Phone settings

(Menu 9.1)

Many different features of your phone’s system can be

customised to suit your preferences.

The password is preset to

00000000

. You can

change this password.



p. 87

Menu functions

Phone profiles

(Menu 9.1.1)

Use this menu to adjust and customise the phone tone

for different events or situations.

Editing a profile

1. Scroll to the profile you want.

2. Press <

Options

> and select

Edit

3. Change the sound settings:

•

Call alert type

: select an alert type for the call

ringer.

•

Voice call ringtone

: press [Centre] and select

a ringtone for the call ringer of voice calls.

•

Tone volume

: adjust the volume for the call

ringer.

•

Msg. alert type

: select an alert type for the

message ringer.

•

Msg. alert tone

: press [Centre] and select a

ringtone for the message ringer.

•

Msg. alert repetition

: select if the phone

repeats reminding you of a new message.

•

Phone sounds

: press [Centre] and turn the

various sounds on the phone on or off.

All on

: enable all tones.

Minute minder

: cause the phone to beep

every minute during an outgoing call to keep

you informed of the length of your call.

Call connect tone

: cause the phone to beep

when a call is connected to the system.

Power on

: cause the phone to beep when you

turn on the phone.

Slider tone

: cause the phone to sound when

you open or close the phone.

Alert on call

: cause the phone to beep when

you receive a new message or when the time

for an alarm comes during a call.

All off

: disable all tones.

•

Key tones

: press [Centre] and select a tone

which sounds when you press a key.

•

Key tone volume

: adjust the volume of the

key tones.

•

Call answer mode

(for Car): Press [Centre]

and select how to answer an incoming call

when the phone is connected to a hands-free

car kit.

Menu functions

Settings

(Menu 9)

4. When you have finished, press <

Options

> and

select

Activate

Changing an active profile

Select the profile you want.

Phone language

(Menu 9.1.2)

Use this menu to select one of several languages for

the display text.

Assign rintone

(Menu 9.1 3)

Use this menu to change the alert type and assign a

ringtone for each event on your phone, separately

from profile settings.



p. 76

Short cut

(Menu 9.1.4)

You can use the Navigation keys as shortcut keys to

access specific menus directly from Idle mode. Use

this menu to assign a shortcut to a key.

Assigning a shortcut menu

1. Select a key to be used as a shortcut key and press

Options

> and select

Change

2. Select the menu to be assigned to the key.

Using shortcut options

Press <

Options

> to access the following options:

•

Change

: assign or change a shortcut menu.

•

Remove

: deactivate the shortcut assignment to

the selected key.

•

Remove all

: deactivate all shortcut assignments.

Time & date

(Menu 9.1.5)

Use this menu to change the time and date displayed

on your phone. Before setting the time and date,

specify your time zone in the

World time

menu.



p. 67

•

Set time

: enter the current time.

•

AM/PM

: select

in 12-hour time format.

•

Time format

: select time format.

•

Set date

: enter the current date.

•

Starting day of calendar

: set whether the

calendar starts with Sunday or Monday.

Menu functions

Greeting message

(Menu 9.1.6)

Use this menu to enter the greeting that is displayed

briefly when the phone is switched on.

Slide settings

(Menu 9.1.7)

Use this menu to set how the phone reacts when you

open it for an incoming call, and when you close it

while using a function.

•

: set whether or not to answer a call by opening

the phone.

•

Down

: set whether or not the phone maintains

the menu you are using when you close the phone.

Anykey answer

(Menu 9.1.8)

Use this menu to answer an incoming call by pressing

any key, except [ ] or <

Reject

When this option is not selected, you must press [ ]

or <

> to answer a call.

Alert on game

(Menu 9.1.9)

Use this menu to set the phone to inform you of

incoming messages, or alarm alerts while playing a

game.

Reset settings

(Menu 9.1.0)

Use this menu to reset the phone to its default

settings.

Enter the phone password and press <

Display settings

(Menu 9.2)

Use this menu to change settings for the display and

light.

Wallpaper

(Menu 9.2.1)

You can change the settings for the Idle screen.

•

Main display

: select an image or video clip to be

displayed on the main display.

•

Text mode

: select a text mode.

•

Text colour

: select the text colour.

When you set

Down

Continue operation

, the

keypad lock works only in Idle mode.

The password is preset to

00000000

. You can change

this password



p. 87

Menu functions

Settings

(Menu 9)

•

Graphic logo

: set the phone to display a graphic

icon instead of the service provider’s logo on the

Idle screen. This option is only available if a

graphic icon has been received in a message.

LCD brightness

(Menu 9.2.2)

You can adjust the brightness of the display for

varying lighting conditions.

Backlight time

(Menu 9.2.3)

You can select the length of time the backlight stays

on and the display is on in Dim mode, in which the

backlight is off.

•

LCD on

: select the length of time the backlight is

on.

•

LCD dim

: select the length of time the display is in

Dim mode after the backlight turns off. After a

specified time, the display turns off.

Dialing font colour

(Menu 9.2.4)

Use this menu to select a font colour for the numbers

entered while dialling.

Service light

(Menu 9.2.5)

Use this menu to activate or deactivate the feature of

the service light.

Messaging settings

(Menu 9.3)

Use this menu to change the default settings for using

the message feature.



p. 45

Call settings

(Menu 9.4)

Use this menu to set options for call functions.

Show my number

(Menu 9.4.1)

This network service allows you to prevent your phone

number from being displayed on the phone of the

person being called. However, some networks do not

allow the user to change this setting.

•

By network

: use the default setting provided by

the network.

•

Hide

number

: ensure your number does not

display on the other person’s phone.

•

Send

number

: send your number each time you

make a call.

Menu functions

Diverts

(Menu 9.4.2)

This network service reroutes incoming calls to a

phone number that you specify.

1. Select a call diverting option:

•

Always

: divert calls.

•

Busy

: divert calls when you are on another

call.

•

: divert calls when you do not answer

the phone.

•

Not unreachable

: divert calls when you are

not in an area covered by your service provider

or when your phone is switched off.

•

Cancel

all

: cancel all call diverting options.

2. Select the type of calls to be diverted.

3. To activate call diverting, select

Activate

Otherwise, select

Deactivate

4. Move to the

Divert to

line.

5. Enter the number to which calls are to be diverted

and press <

Select

6. If you selected

No reply

, move to the

Seconds

line and select the length of time the network

delays before diverting a call.

Restrict calls

(Menu 9.4.3)

This network service allows you to restrict your calls.

1. Select a call barring option:

•

All

outgoing calls

: prohibit all outgoing calls.

•

Outgoing int’l calls

: prohibit international

calls.

•

Int’l call exc. Home

: only allow calls to

numbers within the current country when you

are abroad, and to your home country.

•

All

incoming call

: prohibit incoming calls.

•

Incoming

calls when roaming

: prohibit

incoming calls when you use your phone

outside of your home country.

•

Cancel

all

: cancel all call barring settings,

allowing calls to be sent and received normally.

•

Change restrict password

: change the call

barring password obtained from your service

provider.

2. Select the type of calls to be barred.

3. Select

Activate

. To deactivate call barring, select

Deactivate

Menu functions

Settings

(Menu 9)

4. Enter the call barring password supplied by your

service provider and press <

Select

Call waiting

(Menu 9.4.4)

This network service informs you when someone is

trying to reach you while you are on another call.

1. Select the type of calls to which call waiting option

will apply.

2. Select

Activate

and press <

Select

To deactivate call waiting, select

Deactivate

Auto redial

(Menu 9.4.5)

Use this menu to make up to ten attempts to redial a

phone number after an unsuccessful call.

Closed user group

(Menu 9.4.6)

Use this menu to set incoming and outgoing calls to be

restricted to a selected user group. For details about

how to create a closed user group, contact your

service provider.

•

Index list

: add, delete, or activate CUG index

numbers. Press <

Options

> to access the options

for setting up an index list.

•

Outside access

: enable calls to numbers other

than those in the Closed user group. This feature

depends on the nature of your CUG subscription.

•

Default group

: enable the default CUG, if you

have set one with your service provider. When

making a call, you are given the option of using

your default CUG, instead of selecting one from the

list.

•

Deactivate

: deactivate the CUG function, if the

default group is enabled or a CUG index is

selected.

Contact settings

(Menu 9.5)

Use this menu to change the settings for using

Contacts.

•

Speed dialing

: check the speed dial settings.



p. 73

•

Sort contacts by

: select a sort order of the

Contacts list.

•

Save new contacts to

: select a default memory

location to save contacts.

Menu functions

If you select

Ask each time

, the phone will ask

you to select a memory location when saving a

number.

•

View contacts from

: select a default memory

location to retrieve the contacts you have stored in

Contacts.

•

Privacy

: set whether or not the phone displays

sender’s information with notifications when you

receive calls or messages.

live! Cast name settings

(Menu 9.6)

Use this menu to change the settings for using the

Live! Cast feature.

•

Switch live!cast on

off

: set whether or not the

phone receives Live! Cast messages from the Live!

Cast server.

•

Edit channel list

: edit the channels from which

the phone receives Live! Cast messages.

•

Ticker settings

: change the settings for the

ticker.

Ticker speed

: set the speed at which the Live!

Cast headlines scroll across the screen.

Num of messages

: set the number of headlines

the thicker will display.

Streaming settings

(Menu 9.7)

Use this menu to activate a connection profile to be

used for accessing streaming servers to use VOD

services. You can also make or edit a profile.



p. 86

Connectivity

(Menu 9.8)

Use this menu to set options for connection available

on your phone.

Infrared activate

(Menu 9.8.1)

Use this feature to send and receive data to or from

IrDA-compatible computers or phones through the

infrared port. To use an infrared connection, you must

do the following:

• Select the device type you want to use.

• Configure and activate an IrDA-compliant infrared

port on the other device.

• Activate the infrared feature on your phone.

Menu functions

Settings

(Menu 9)

• Align the IrDA port on the

phone with the IrDA port on

the other device.

If there is no communication

between your phone and the

other IrDA-compliant device

within 60 seconds of activating

the feature, it is automatically

deactivated.

Bluetooth

(Menu 9.8.2)

Use this menu to activate the Bluetooth feature.

Using the Bluetooth feature, you can connect the

phone wirelessly to other Bluetooth devices and

exchange data with them, talk hands-free, or control

the phone remotely.

Bluetooth technology allows free wireless connections

between all Bluetooth-compliant devices within a

range of 10 meters. Since the devices communicate

using radio waves, they do not need to be in line of

sight to each other.

Setting up the Bluetooth feature

The

Bluetooth

menu provides the following options:

•

Activation

: activate or deactivate the Bluetooth

feature.

•

My devices

: search for connectable Bluetooth

devices.

•

My phone’s visibility

: allow other Bluetooth

devices to search for your phone.

•

My phone’s name

: assign a Bluetooth device

name to your phone, which is then displayed on

other devices.

•

Secure mode

: determine if the phone asks for

your confirmation when other devices access your

data.

•

If there are obstacles between the devices, the

maximum operating distance may be reduced.

• You cannot use the Bluetooth feature while using

multimedia features such as voice recorder,

camera, and media player, or vice versa.

• Some devices may not be compatible with your

phone.

Menu functions

•

Bluetooth services

: display available Bluetooth

services.

Searching for and pairing with a Bluetooth

device

1. From the Bluetooth setting options, select

devices

2. Select

Search new device

After searching, a list of devices to which you can

connect displays. The following icons indicate the

kind of device:

The colour of the icon indicates the status of the

the device:

• Grey for unpaired devices

• Blue for paired devices

• Red for devices that are currently connected to

your phone

3. Select a device.

4. Enter a Bluetooth PIN code and press <

This

code is used just once and you don’t need to

memorise it.

When the owner of the other device enters the

same code, pairing is complete.

Using device options

From the device list, press <

Options

> to access the

following options:

•

Connect

: connect to the currently selected

device.

•

Disconnect

: end the connection with the

device.

•

Browse files

: search for data from the device

and import data directly to your phone.

•

Service list

: refresh the Bluetooth service list.

• Hands-free or

headset • Mobile phone

• Computer • PDA

• Printer • Unknown device

Some devices, especially headsets or hands-free car

kits, may have a fixed Bluetooth PIN, such as

0000

. If

the other device has a code, you must enter it.

Options may vary depending on the paired device.

Menu functions

Settings

(Menu 9)

•

Rename

: rename the paired device.

•

Authorize device

Unauthorized device

determine whether or not the phone asks you

to permit connection when other devices try to

connect to your phone.

•

Delete

: remove the selected device or all

devices from the device list.

Sending data via Bluetooth

1. Activate the Bluetooth feature.

2. Select the application in which the item you want

to send is stored.

3. Scroll to the item you want and press <

Options

4. Select

Send

→

via Bluetooth

The phone searches for devices within range and

displays a list of available devices.

5. Select a device.

6. If necessary, enter the Bluetooth PIN needed for

pairing and press <

Receiving data via Bluetooth

To receive data via Bluetooth, your phone’s Bluetooth

feature must be active.

If an unauthorised Bluetooth device sends data to your

phone, the phone displays a confirmation message. To

receive data, press <

Yes

Synchronise

(Menu 9.8.3)

You can set up the synchronisation profile.

•

Sync Server Address

: set the server address.

•

User ID

: set the user ID.

•

Password

: set the user password.

•

DB Name

: set the DB name.

•

DB Login ID

: set the DB user ID.

•

Sync server

: activate a synchronisation profile.

Select network

(Menu 9.8.4)

This network service allows you to either automatically

or manually select the network to be used while

roaming outside of your home area.

You can select a network other than your home

network only if there is a valid roaming agreement

between the two.

Menu functions

Band selection

(Menu 9.8.5)

For the phone to make and receive phone calls, it

must register with an available network. Your phone

can handle any of the following types of networks:

GSM 1900 and Combined GSM 900/1800.

The country where you purchased your phone

determines the default band that it uses. When you

travel abroad, you may need to change to an

appropriate band.

Connections

(Menu 9.8.6)

You can set up information about your network

connection. In most cases, you don’t need to change

the settings. In case of problems, please contact your

service provider.

Adding a connection profile

Press <

Options

> and select

Add new connection

The following options are available:

•

Profile name

: enter the profile name.

•

Home URL

: enter your homepage address.

•

Proxy

: select to set the phone to use the proxy

server.

•

IP address

Port

: set the proxy server address

and port.

•

Linger time

: set a time period after which the

network is disconnected if there has been no new

data traffic in that time.

•

Bearer

: select a bearer type,

GPRS

GSM

•

Advanced settings

provide you with the

following options:

APN

: (for GPRS) enter the access point name.

Dial number

: (for GSM) enter the PPP server

phone number.

: enter the user ID.

Password

: enter the user password.

Data call type

: (for GSM) select a data call type.

Managing browser profiles

On the list of connection profiles, scroll to a profile and

press <

Options

> to access the following options:

•

Edit

: edit the selected connection.

•

Delete

: delete the selected connection.

Menu functions

Settings

(Menu 9)

•

Add new connection

: add a new connection.

Browser settings

(Menu 9.8.7)

Use this menu to activate a browser profile to be used

for connecting to a wireless web.



p. 86

Security

(Menu 9.9)

Use this menu to protect the phone against

unauthorised use by managing the several access

codes of your phone and SIM card.

Phone lock

(Menu 9.9.1)

This feature locks the phone from unauthorised use.

When this feature is enabled, you must enter a 4- to

8-digit phone password each time the phone is

switched on.

The password is preset to

00000000

. To change the

password, use the

Change phone password

menu.

SIM lock

(Menu 9.9.2)

The SIM lock feature allows your phone to work only

with the current SIM by assigning a SIM lock code. You

must enter the SIM lock code to use a different SIM

card.

PIN lock

(Menu 9.9.3)

The 4- to 8-digit PIN (Personal Identification Number)

protects your SIM card against unauthorised use.

When this feature is enabled, the phone requires your

PIN each time it is switched on.

Fixed dialling mode

(Menu 9.9.4)

If supported by your SIM card, Fixed Dialling Number

(FDN) mode restricts your outgoing calls to a limited

set of phone numbers. When this feature is enabled,

you can make calls only to phone numbers stored in

the SIM card. To use this feature, you must enter your

PIN2.

Change phone password

(Menu 9.9.5)

Use this menu to change your phone password. The

password is preset to

00000000

You cannot edit or delete the default connections.

If you enter an incorrect PIN /PIN2 three times in

succession, the SIM card is blocked. To unblock it, you

need to enter your PUK/PUK2 (Personal Unblocking

Key). The codes are supplied by your network operator.

Solve problems

Privacy lock

(Menu 9.9.6)

Use this menu to lock all menu functions on the

phone, except for call functions.

When this feature is enabled, you must enter the

phone password to access menu functions. The

password is preset to

00000000

Change PIN code

(Menu 9.9.7)

Use this menu to change your PIN. The PIN check

feature must be enabled to use this feature.

Change PIN2 code

(Menu 9.9.8)

If supported by your SIM card, the change PIN2 code

feature changes your current PIN2.

Memory status

(Menu 9.0)

Use this menu to check the amount of memory being

used for storing data, such as games, messages,

media files, calendar items, and contacts.

Solve problems

Help and personal needs

To save the time and expense of an unnecessary service

call, perform the simple checks in this section before

contacting a service professional.

When you switch on your phone, the following

messages may appear:

“Insert SIM card”

• Be sure that the SIM card is correctly installed.

“Enter password”

• The automatic locking function has been enabled.

You must enter the phone’s password before you

can use the phone.

“Enter PIN”

• You are using your phone for the first time. You

must enter the PIN supplied with the SIM card.

• The PIN check feature is enabled. Every time the

phone is switched on, the PIN has to be entered.

To disable this feature, use the

PIN lock

menu.

“Enter PUK”

• The PIN code has been entered incorrectly three

times in succession, and the phone is now blocked.

Enter the PUK supplied by your service provider.

“No service,” “Network failure,” or “Not done”

displays

• The network connection has been lost. You may be

in a weak signal area. Move and try again.

• You are trying to access an option for which you

have no subscription with your service provider.

Contact the service provider for further details.

You have entered a number but it was not

dialled

• Be sure that you have pressed [ ].

• Be sure you have accessed the right cellular

network.

• Be sure that you have not set an outgoing call

barring option.

Your correspondent cannot reach you

• Be sure your phone is switched on. ([ ] pressed

for more than one second.)

• Be sure you are accessing the correct cellular

network.

• Be sure that you have not set an incoming call

barring option.

Your correspondent cannot hear you speaking

• Be sure you have switched on the microphone.

• Be sure you are holding the phone close enough to

your mouth. The microphone is located at the

bottom of the phone.

The phone starts beeping and warning “Low

battery” flashes on the display

• Your battery is insufficiently charged. Recharge the

battery.

The audio quality of the call is poor

• Check the signal strength indicator on the display

( ). The number of bars indicates the signal

strength from strong ( ) to weak ( ).

125

Health and Safety

Information

Exposure to Radio Frequency (RF) Signals

Your wireless phone is a radio transmitter and receiver.

It is designed and manufactured not to exceed the

emission limits for exposure to radio frequency (RF)

energy set by the Federal Communications Commission

(FCC) of the U.S. Government. These limits are part of

comprehensive guidelines and establish permitted

levels of RF energy for the general population. The

guidelines are based on the safety standards that were

developed by independent scientific organizations

through periodic and through evaluation of scientific

studies.

The standards include a substantial safety margin

designed to assure the safety of all persons, regardless

of age and health.

The exposure standard for wireless phones employs a

unit of measurement known as Specific Absorption

Rate (SAR). The SAR limit set by the FCC is 1.6W/kg *.

*In the U.S. and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg)

averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give

additional protection for the public and to account for any variations in measurements.

safety-end-NorthA 1/27/03 2:05 PM Page 125

126

HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn

127

HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn

SAR tests are conducted using standard operating

positions specified by the FCC with the phone

transmitting at its highest certified power level in all

tested frequency bands. Although the SAR is

determined at the highest certified power level, the

actual SAR level of the phone while operating can be

well below the maximum value. This is because the

phone is designed to operate at multiple power levels

so as to use only the power required to reach the

network. In general, the closer you are to a wireless

base station antenna, the lower the power output of

the phone.

Before a new model phone is available for sale to the

public, it must be tested and certified to the FCC that

it does not exceed the limit established by the

government-adopted requirement for safe exposure.

The tests are performed in positions and locations

(e.g., at the ear and worn on the body) as required by

the FCC for each model. While there may be

differences between the SAR levels of various phones

and at various positions, they all meet the government

requirement.

The FCC has granted an Equipment Authorization for this

model phone with all reported SAR levels evaluated as in

compliance with the FCC RF exposure guidelines. SAR

information on this model phone is on file with the FCC

and can be found under the Display Grant section of

http://www.fcc.gov/oet/fccid after searching on FCC ID

printed in the label on the phone.

FCC certification information for this model phone is

attached separation paper.

For Body Operation

For body worn operation, this model phone has been

tested and meets the FCC RF exposure guidelines when

used with a Samsung-supplied or approved accessory

designated for this product or when used with and

accessory that contains no metal and that positions the

handset a minimum from the body.

The minimum distance for this model phone is written in

the FCC certification information from the body.

None compliance with the above conditions may violate

FCC RF exposure guidelines.

For more Information concerning exposure to radio

frequency signals, see the following websites:

Federal Communications Commission (FCC)

http://www.fcc.gov/rfsafety

Cellular Telecommunications Industry Association (CTIA):

http://www.wow-com.com

U.S.Food and Drug Administration (FDA)

http://www.fda.gov/cdrh/consumer

World Health Organization (WHO)

http://www.who.int/peh-emf/en

safety-end-NorthA 1/27/03 2:05 PM Page 126

129

HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn

• Do not leave the battery in hot or cold places, such

as in a car in summer or winter conditions, as you

will reduce the capacity and lifetime of the battery.

Always try to keep the battery at room

temperature. A phone with a hot or cold battery

may temporarily not work, even when the battery

is fully charged. Li-ion batteries are particularly

affected by temperatures below 0 °C (32 °F).

• Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object (coin,

clip or pen) causes a direct connection between

the + and – terminals of the battery (metal strips

on the battery), for example when you carry a

spare battery in a pocket or bag. Short-circuiting

the terminals may damage the battery or the

object causing the short-circuiting.

• Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

Road Safety

Your wireless phone gives you the powerful ability to

communicate by voice, almost anywhere, anytime.

But an important responsibility accompanies the

benefits of wireless phones, one that every user

must uphold.

When driving a car, driving is your first responsibility.

When using your wireless phone behind the wheel of

a car, practice good common sense and remember

the following tips.

128

HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn

Precautions When Using Batteries

• Never use any charger or battery that is damaged in

any way.

• Use the battery only for its intended purpose.

• If you use the phone near the network’s base

station, it uses less power; talk and standby time

are greatly affected by the signal strength on the

cellular network and the parameters set by the

network operator.

• Battery charging time depends on the remaining

battery charge and the type of battery and charger

used. The battery can be charged and discharged

hundreds of times, but it will gradually wear out.

When the operation time (talk time and standby

time) is noticeably shorter than normal, it is time to

buy a new battery.

• If left unused, a fully charged battery will discharge

itself over time.

• Use only Samsung-approved batteries and recharge

your battery only with Samsung-approved chargers.

When a charger is not in use, disconnect it from the

power source. Do not leave the battery connected to

a charger for more than a week, since overcharging

may shorten its life.

• Extreme temperatures will affect the charging

capacity of your battery: it may require cooling or

warming first.

safety-end-NorthA 1/27/03 2:05 PM Page 128

131

HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn

130

HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn

7. Do not engage in stressful or emotional

conversations that may be distracting. Make the

people with whom you are talking aware that you

are driving and suspend conversations that have

the potential to divert your attention from the

road.

8. Use your wireless phone to call for help. Dial the

emergency number in the case of fire, traffic

accident or medical emergencies. Remember, it is

a free call on your wireless phone!

9. Use your wireless phone to help others in

emergencies. If you see a car accident, crime in

progress or other serious emergency where lives

are in danger, call the emergency number, as you

would want others to do for you.

10. Call roadside assistance or a special non-

emergency wireless assistance number when

necessary. If you see a broken-down vehicle

posing no serious hazard, a broken traffic signal,

a minor traffic accident where no one appears

injured, or a vehicle you know to be stolen, call

roadside assistance or any other special non-

emergency wireless number.

1. Get to know your wireless phone and its features,

such as speed dial and redial. If available, these

features help you to place your call without taking

your attention off the road.

2. When available, use a hands-free device. If

possible, add an extra layer of convenience and

safety to your wireless phone with one of the

many hands-free accessories available today.

3. Position your wireless phone within easy reach. Be

able to access your wireless phone without

removing your eyes from the road. If you get an

incoming call at an inconvenient time, let your

voice mail answer it for you.

4. Let the person you are speaking with know you are

driving; if necessary, suspend the call in heavy

traffic or hazardous weather conditions. Rain,

sleet, snow, ice and even heavy traffic can be

hazardous.

5. Do not take notes or look up phone numbers while

driving. Jotting down a To Do list or flipping

through your phonebook takes your attention away

from your primary responsibility, driving safely.

6. Dial sensibly and assess the traffic; if possible,

place calls when you are not moving or before

pulling into traffic. Try to plan calls when your car

will be stationary. If you need to make a call while

moving, dial only a few numbers, check the road

and your mirrors, then continue.

safety-end-NorthA 1/27/03 2:05 PM Page 130

133

HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn

132

HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn

Wireless Technology Research.

Persons with pacemakers:

• Should always keep the phone more than 15 cm (6

inches) from their pacemaker when the phone is

switched on

• Should not carry the phone in a breast pocket

• Should use the ear opposite the pacemaker to

minimize potential interference

If you have any reason to suspect that interference is

taking place, switch off your phone immediately.

Hearing Aids

Some digital wireless phones may interfere with

some hearing aids. In the event of such interference,

you may wish to consult your hearing aid

manufacturer to discuss alternatives.

Other Medical Devices

If you use any other personal medical devices,

consult the manufacturer of your device to determine

if it is adequately shielded from external RF energy.

Your physician may be able to assist you in obtaining

this information. Switch off your phone in health care

facilities when any regulations posted in these areas

instruct you to do so. Hospitals or health care

facilities may be using equipment that could be

sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or

inadequately shielded electronic systems in motor

vehicles. Check with the manufacturer or its

Operating Environment

Remember to follow any special regulations in force

in any area and always switch off your phone

whenever it is forbidden to use it, or when it may

cause interference or danger.

When connecting the phone or any accessory to

another device, read its user’s guide for detailed

safety instructions. Do not connect incompatible

products.

As with other mobile radio transmitting equipment,

users are advised that for the satisfactory operation

of the equipment and for the safety of personnel, it is

recommended that the equipment should only be

used in the normal operating position (held to your

ear with the antenna pointing over your shoulder).

Electronic Devices

Most modern electronic equipment is shielded from

radio frequency (RF) signals. However, certain

electronic equipment may not be shielded against

the RF signals from your wireless phone. Consult the

manufacturer to discuss alternatives.

Pacemakers

Pacemaker manufacturers recommend that a

minimum distance of 15 cm (6 inches) be maintained

between a wireless phone and a pacemaker to avoid

potential interference with the pacemaker. These

recommendations are consistent with the

independent research and recommendations of

safety-end-NorthA 1/27/03 2:05 PM Page 132

135

HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn

134

HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn

Emergency Calls

This phone, like any wireless phone, operates using

radio signals, wireless and landline networks as well

as user-programmed functions, which cannot guarantee

connection in all conditions. Therefore, you should

never rely solely on any wireless phone for essential

communications (medical emergencies, for example).

Remember, to make or receive any calls the phone

must be switched on and in a service area with

adequate signal strength. Emergency calls may not be

possible on all wireless phone networks or when

certain network services and/or phone features are in

use. Check with local service providers.

To make an emergency call, proceed as follows.

1. If the phone is not on, switch it on.

2. Key in the emergency number for your present

location. Emergency numbers vary by

location.

3. Press the <SEND> key.

If certain features are in use (call barring, for example),

you may first need to deactivate those features before

you can make an emergency call. Consult this

document and your local cellular service provider.

When making an emergency call, remember to give all

the necessary information as accurately as possible.

Remember that your phone may be the only means of

communication at the scene of an accident; do not cut

off the call until given permission to do so.

representative regarding your vehicle.

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Posted Facilities

Switch off your phone in any facility where posted

notices require you to do so.

Potentially Explosive Atmospheres

Switch off your phone when in any area with a

potentially explosive atmosphere and obey all signs

and instructions. Sparks in such areas could cause an

explosion or fire resulting in bodily injury or even

death.

Users are advised to switch off the phone while at a

refueling point (service station). Users are reminded

of the need to observe restrictions on the use of

radio equipment in fuel depots (fuel storage and

distribution areas), chemical plants or where blasting

operations are in progress.

Areas with a potentially explosive atmosphere are

often but not always clearly marked. They include

below deck on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas

(such as propane or butane), areas where the air

contains chemicals or particles, such as grain, dust

or metal powders, and any other area where you

would normally be advised to turn off your vehicle

engine.

safety-end-NorthA 1/27/03 2:05 PM Page 134

137

HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn

136

HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn

Care and Maintenance

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for

many years.

• Keep the phone and all its parts and accessories

out of the reach of small children’s.

• Keep the phone dry. Precipitation, humidity and

liquids contain minerals that will corrode

electronic circuits.

• Do not touch the phone with a wet hand while it is

charging. Doing so may cause an electric shock to

you or damage to the phone.

• Do not use or store the phone in dusty, dirty areas,

as its moving parts may be damaged.

• Do not store the phone in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt

certain plastics.

• Do not store the phone in cold areas. When the

phone warms up to its normal operating

temperature, moisture can form inside the phone,

which may damage the phone’s electronic circuit

boards.

Other Important Safety Information

• Only qualified personnel should service the phone or

install the phone in a vehicle. Faulty installation or

service may be dangerous and may invalidate any

warranty applicable to the device.

• Check regularly that all wireless phone equipment in

your vehicle is mounted and operating properly.

• Do not store or carry flammable liquids, gases or

explosive materials in the same compartment as the

phone, its parts or accessories.

• For vehicles equipped with an air bag, remember

that an air bag inflates with great force. Do not

place objects, including both installed or portable

wireless equipment in the area over the air bag or in

the air bag deployment area. If wireless equipment

is improperly installed and the air bag inflates,

serious injury could result.

• Switch off your phone before boarding an aircraft.

The use of wireless phones in aircraft may be

dangerous to the operation of the aircraft, and is

illegal.

• Failure to observe these instructions may lead to the

suspension or denial of telephone services to the

offender, or legal action, or both.

safety-end-NorthA 1/27/03 2:05 PM Page 136

139

HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn

138

HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn

• Do not drop, knock or shake the phone. Rough

handling can break internal circuit boards.

• Do not use harsh chemicals, cleaning solvents or

strong detergents to clean the phone. Wipe it with a

soft cloth slightly dampened in a mild soap-and-water

solution.

• Do not paint it. Paint can clog the device’s moving

parts and prevent proper operation.

• Do not put the phone in or on heating devices, such as

a microwave oven, a stove or a radiator. The phone

may explode when overheated.

• Use only the supplied or an approved replacement

antenna. Unauthorized antennas or modified

accessories may damage the phone and violate

regulations governing radio devices.

• If the phone, battery, charger or any accessory is not

working properly, take it to your nearest qualified

service facility. The personnel there will assist you,

and if necessary, arrange for service.

Acknowledging Special Precautions and the FCC

and Industry Canada Notice

Cautions

Modifications not expressly approved by the party

responsible for compliance could void the user's authority

to operate the equipment. FCC Compliance Information

This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received.

Including interference that may cause undesired

operation.

Information to User

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is

no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the

interference by one or more of the following measures:

safety-end-NorthA 1/27/03 2:05 PM Page 138

141

AAppppeennddiixx

Appendix A: CERTIFICATION INFORMATION (SAR)

THIS MODEL PHONE MEETS THE GOVERNMENT’S

REQUIREMENTS FOR

EXPOSURE TO RADIO WAVES.

Your wireless phone is a radio transmitter and receiver.

It is designed and manufactured not to exceed the

emission limits for exposure to radio frequency(RF)

energy set by the Federal Communications Commission

of the U.S. Government. These limits are part of

comprehensive guidelines and establish permitted

levels of RF energy for the general population. The

guidelines are based on safety standards that were

developed by independent scientific organizations

through periodic and thorough evaluation of scientific

studies. The standards include a substantial safety

margin designed to assure the safety of all persons,

regardless of age and health.

The exposure standard for wireless mobile phones

employs a unit of measurement known as the Specific

Absorption Rate(SAR). The SAR limit set by the FCC is

1.6 W/kg. SAR Tests are conducted using standard

operating positions accepted by the FCC with the

phone transmitting at its highest certified power level

in all tested frequency bands. Although the SAR is

determined at the highest certified power level, the

actual SAR level of the phone while operating can be

well below the maximum value. This is because the

phone is designed to operate at multiple power levels

so as to use only the power required to reach the

network. In general, the closer you are to a wireless

base station antenna, the lower the power output.

140

HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/ TV

technician for help.

safety-end-NorthA 1/27/03 2:05 PM Page 140

143

Appendix B: Guide to Safe and Responsible Wireless

Phone Use

Cellular Telecommunications & Internet Association

“Safety is the most important call you will ever make.”

A Guide to Safe and Responsible Wireless Phone Use

TENS OF MILLIONS OF PEOPLE IN THE U.S. TODAY TAKE

ADVANTAGE OF THE UNIQUE COMBINATION OF

CONVENIENCE, SAFETY AND VALUE DELIVERED BY THE

WIRELESS TELEPHONE. QUITE SIMPLY, THE WIRELESS

PHONE GIVES PEOPLE THE POWERFUL ABILITY TO

COMMUNICATE BY VOICE-ALMOST ANYWHERE,

ANYTIME-WITH THE BOSS, WITH A CLIENT, WITH THE

KIDS, WITH EMERGENCY PERSONNEL OR EVEN WITH

THE POLICE. EACH YEAR, AMERICANS MAKE BILLIONS

OF CALLS FROM THEIR WIRELESS PHONES, AND THE

NUMBERS ARE RAPIDLY GROWING.

But an important responsibility accompanies those

benefits, one that every wireless phone user must

uphold. When driving a car, driving is your first

responsibility. A wireless phone can be an invaluable

tool, but good judgment must be exercised at all times

while driving a motor vehicle-whether on the phone or

not.

The basic lessons are ones we all learned as teenagers.

Driving requires alertness, caution and courtesy. It

requires a heavy dose of basic common sense-keep your

head up, keep your eyes on the road, check your mirrors

frequently and watch out for other drivers. It requires

obeying all traffic signs and signals and staying within

the speed limit. It means using seatbelts and requiring

other passengers to do the same.

142

Before a new model phone is available for sale to the

public, it must be tested and certified to the FCC that it

does not exceed the limit established by the government-

adopted requirement for safe exposure. The tests are

performed in positions and locations(e.g., at the ear and

worn on the body) as required by the FCC for each

model.

The highest SAR values for this model phone as reported

to the FCC are Head: 0.298W/Kg, Body-worn: 0.280W/Kg.

Body-worn operations are restricted to Samsung-

supplied, approved or none Samsung designated

accessories that have no metal and must provide at least

1.5cm separation between the device, including its

antenna whether extended or retracted, and the user’s

body. None compliance to the above restrictions may

violate FCC RF exposure guidelines

The FCC has granted an Equipment Authorization for this

model phone with all reported SAR levels evaluated as

in compliance with the FCC RF exposure guidelines. SAR

information on this model phone is on file with the FCC

and can be found under the Display Grant section of

http://www.fcc.gov/oet/fccid after searching on FCC ID

A3LSGHE860V.

In the United States and Canada, the SAR limit for

mobile phones used by the public is 1.6

watts/kilogram(W/kg) averaged over one gram of tissue.

The standard incorporates a substantial margin of safety

to give additional protection for the public and to

account for any variations in measurements.

AAppppeennddiixxAAppppeennddiixx

safety-end-NorthA 1/27/03 2:05 PM Page 142

145

4. Suspend conversations during hazardous driving

conditions or situations. Let the person you are speaking

with know you are driving; if necessary, suspend the call

in heavy traffic or hazardous weather conditions. Rain,

sleet, snow and ice can be hazardous, but so is heavy

traffic. As a driver, your first responsibility is to pay

attention to the road.

5. Do not take notes or look up phone numbers while

driving. If you are reading an address book or business

card, or writing a “to do” list while driving a car, you are

not watching where you are going. It’s common sense.

Don’t get caught in a dangerous situation because you

are reading or writing and not paying attention to the

road or nearby vehicles.

6. Dial sensibly and assess the traffic; if possible, place

calls when you are not moving or before pulling into

traffic. Try to plan your calls before you begin your trip or

attempt to coincide your calls with times you may be

stopped at a stop sign, red light or otherwise stationary.

But if you need to dial while driving, follow this simple

tip-dial only a few numbers, check the road and your

mirrors, then continue.

7. Do not engage in stressful or emotional conversations

that may be distracting. Stressful or emotional

conversations and driving do not mix-they are distracting

and even dangerous when you are behind the wheel of a

car. Make people you are talking with aware you are

driving and if necessary, suspend conversations which

have the potential to divert your attention from the road.

144

But with wireless phone use, driving safely means a

little more. This brochure is a call to wireless phone

users everywhere to make safety their first priority when

behind the wheel of a car. Wireless telecommunications

is keeping us in touch, simplifying our lives, protecting us

in emergencies and providing opportunities to help

others in need. When it comes to the use of wireless

phones, safety is your most important call.

Wireless Phone “Safety Tips”

Below are safety tips to follow while driving and using a

wireless phone which should be easy to remember.

1. Get to know your wireless phone and its features such

as speed dial and redial. Carefully read your instruction

manual and learn to take advantage of valuable features

most phones offer, including automatic redial and

memory. Also, work to memorize the phone keypad so

you can use the speed dial function without taking your

attention off the road.

2. When available, use a hands free device. A number of

hands free wireless phone accessories are readily

available today. Whether you choose an installed

mounted device for your wireless phone or a speaker

phone accessory, take advantage of these devices if

available to you.

3. Position your wireless phone within easy reach. Make

sure you place your wireless phone within easy reach

and where you can grab it without removing your eyes

from the road. If you get an incoming call at an

inconvenient time, if possible, let your voice mail answer

it for you.

AAppppeennddiixxAAppppeennddiixx

safety-end-NorthA 1/27/03 2:05 PM Page 144

146

8. Use your wireless phone to call for help. Your wireless

phone is one of the greatest tools you can own to

protect yourself and your family in dangerous situations-

with your phone at your side, help is only three numbers

away. Dial 9-1-1 or other local emergency number in the

case of fire, traffic accident, road hazard or medical

emergency. Remember, it is a free call on your wireless

phone!

9. Use your wireless phone to help others in

emergencies. Your wireless phone provides you a perfect

opportunity to be a “Good Samaritan” in your community.

If you see an auto accident, crime in progress or other

serious emergency where lives are in danger, call 9-1-1

or other local emergency number, as you would want

others to do for you.

10. Call roadside assistance or a special wireless non-

emergency assistance number when necessary. Certain

situations you encounter while driving may require

attention, but are not urgent enough to merit a call for

emergency services. But you still can use your wireless

phone to lend a hand. If you see a broken-down vehicle

posing no serious hazard, a broken traffic signal, a minor

traffic accident where no one appears injured or a

vehicle you know to be stolen, call roadside assistance

or other special non-emergency wireless number.

Careless, distracted individuals and people driving

irresponsibly represent a hazard to everyone on the road.

Since 1984, the Cellular Telecommunications Industry

Association and the wireless industry have conducted

educational outreach to inform wireless phone users of

147

their responsibilities as safe drivers and good citizens.

As we approach a new century, more and more of us will

take advantage of the benefits of wireless telephones.

And, as we take to the roads, we all have a

responsibility to drive safely.

“The wireless industry reminds you to use your phone

safely when driving.”

Cellular Telecommunications & Internet Association

For more information, please call 1-888-901-SAFE.

For updates: http://www.wow-

com.com/consumer/issues/driving/articles.cfm?ID=85

AAppppeennddiixxAAppppeennddiixx

safety-end-NorthA 1/27/03 2:05 PM Page 146

149

low level RF that does not produce heating effects

causes no known adverse health effects. Many studies

of low level RF exposures have not found any biological

effects. Some studies have suggested that some

biological effects may occur, but such findings have not

been confirmed by additional research. In some cases,

other researchers have had difficulty in reproducing

those studies, or in determining the reasons for

inconsistent results.

3. What is FDA’s role concerning the safety of wireless

phones?

Under the law, FDA does not review the safety of

radiation-emitting consumer products such as wireless

phones before they can be sold, as it does with new

drugs or medical devices. However, the agency has

authority to take action if wireless phones are shown to

emit radiofrequency energy (RF) at a level that is

hazardous to the user. In such a case, FDA could require

the manufacturers of wireless phones to notify users of

the health hazard and to repair, replace or recall the

phones so that the hazard no longer exists.

Although the existing scientific data do not justify FDA

regulatory actions, FDA has urged the wireless phone

industry to take a number of steps, including the

following:

Support needed research into possible biological effects

of RF of the type emitted by wireless phones;

Design wireless phones in a way that minimizes any RF

exposure to the user that is not necessary for device

function; and

Cooperate in providing users of wireless phones with the

148

Appendix C: Consumer Update on Wireless Phones

U.S. Food and Drug Administration

1. What kinds of phones are the subject of this update?

The term wireless phone refers here to hand-held

wireless phones with built-in antennas, often called cell,

mobile, or PCS phones. These types of wireless phones

can expose the user to measurable radiofrequency

energy (RF) because of the short distance between the

phone and the user s head. These RF exposures are

limited by Federal Communications Commission safety

guidelines that were developed with the advice of FDA

and other federal health and safety agencies. When the

phone is located at greater distances from the user, the

exposure to RF is drastically lower because a person’s RF

exposure decreases rapidly with increasing distance

from the source. The so-called “cordless phones,” which

have a base unit connected to the telephone wiring in a

house, typically operate at far lower power levels, and

thus produce RF exposures well within the FCC’s

compliance limits.

2. Do wireless phones pose a health hazard?

The available scientific evidence does not show that any

health problems are associated with using wireless

phones. There is no proof, however, that wireless phones

are absolutely safe. Wireless phones emit low levels of

radiofrequency energy (RF) in the microwave range while

being used. They also emit very low levels of RF when in

the stand-by mode. Whereas high levels of RF can

produce health effects (by heating tissue), exposure to

AAppppeennddiixxAAppppeennddiixx

safety-end-NorthA 1/27/03 2:05 PM Page 148

151

4. What is FDA doing to find out more about the possible

health effects of wireless phone RF?

FDA is working with the U.S. National Toxicology

Program and with groups of investigators around the

world to ensure that high priority animal studies are

conducted to address important questions about the

effects of exposure to radiofrequency energy (RF).

FDA has been a leading participant in the World Health

Organization International Electromagnetic Fields (EMF)

Project since its inception in 1996. An influential result

of this work has been the development of a detailed

agenda of research needs that has driven the

establishment of new research programs around the

world. The Project has also helped develop a series of

public information documents on EMF issues.

FDA and the Cellular Telecommunications & Internet

Association (CTIA) have a formal Cooperative Research

and Development Agreement (CRADA) to do research on

wireless phone safety. FDA provides the scientific

oversight, obtaining input from experts in government,

industry, and academic organizations. CTIA-funded

research is conducted through contracts to independent

investigators. The initial research will include both

laboratory studies and studies of wireless phone users.

The CRADA will also include a broad assessment of

additional research needs in the context of the latest

research developments around the world.

5. What steps can I take to reduce my exposure to

radiofrequency energy from my wireless phone?

150

best possible information on possible effects of wireless

phone use on human health

FDA belongs to an interagency working group of the

federal agencies that have responsibility for different

aspects of RF safety to ensure coordinated efforts at the

federal level. The following agencies belong to this

working group:

National Institute for Occupational Safety and Health

Environmental Protection Agency

Federal Communications Commission

Occupational Safety and Health Administration

National Telecommunications and Information

Administration

The National Institutes of Health participates in some

interagency working group activities, as well.

FDA shares regulatory responsibilities for wireless

phones with the Federal Communications Commission

(FCC). All phones that are sold in the United States must

comply with FCC safety guidelines that limit RF exposure.

FCC relies on FDA and other health agencies for safety

questions about wireless phones.

FCC also regulates the base stations that the wireless

phone networks rely upon. While these base stations

operate at higher power than do the wireless phones

themselves, the RF exposures that people get from these

base stations are typically thousands of times lower than

those they can get from wireless phones. Base stations

are thus not the primary subject of the safety questions

discussed in this document.

AAppppeennddiixxAAppppeennddiixx

safety-end-NorthA 1/27/03 2:05 PM Page 150

153

Some groups sponsored by other national governments

have advised that children be discouraged from using

wireless phones at all. For example, the government in

the United Kingdom distributed leaflets containing such

a recommendation in December 2000. They noted that no

evidence exists that using a wireless phone causes brain

tumors or other ill effects. Their recommendation to limit

wireless phone use by children was strictly

precautionary; it was not based on scientific evidence

that any health hazard exists.

7. Do hands-free kits for wireless phones reduce risks

from exposure to RF emissions?

Since there are no known risks from exposure to RF

emissions from wireless phones, there is no reason to

believe that hands-free kits reduce risks. Hands-free kits

can be used with wireless phones for convenience and

comfort. These systems reduce the absorption of RF

energy in the head because the phone, which is the

source of the RF emissions, will not be placed against

the head. On the other hand, if the phone is mounted

against the waist or other part of the body during use,

then that part of the body will absorb more RF energy.

Wireless phones marketed in the U.S. are required to

meet safety requirements regardless of whether they are

used against the head or against the body. Either

configuration should result in compliance with the safety

limit.

8. Do wireless phone accessories that claim to shield the

head from RF radiation work?

152

If there is a risk from these products—and at this point

we do not know that there is—it is probably very small.

But if you are concerned about avoiding even potential

risks, you can take a few simple steps to minimize your

exposure to radiofrequency energy (RF). Since time is a

key factor in how much exposure a person receives,

reducing the amount of time spent using a wireless

phone will reduce RF exposure.

If you must conduct extended conversations by wireless

phone every day, you could place more distance between

your body and the source of the RF, since the exposure

level drops off dramatically with distance. For example,

you could use a headset and carry the wireless phone

away from your body or use a wireless phone connected

to a remote antenna

Again, the scientific data do not demonstrate that

wireless phones are harmful. But if you are concerned

about the RF exposure from these products, you can use

measures like those described above to reduce your RF

exposure from wireless phone use.

6. What about children using wireless phones?

The scientific evidence does not show a danger to users

of wireless phones, including children and teenagers. If

you want to take steps to lower exposure to

radiofrequency energy (RF), the measures described

above would apply to children and teenagers using

wireless phones. Reducing the time of wireless phone

use and increasing the distance between the user and

the RF source will reduce RF exposure.

AAppppeennddiixxAAppppeennddiixx

safety-end-NorthA 1/27/03 2:05 PM Page 152

155

FDA has tested hearing aids for interference from

handheld wireless phones and helped develop a

voluntary standard sponsored by the Institute of

Electrical and Electronic Engineers (IEEE). This standard

specifies test methods and performance requirements for

hearing aids and wireless phones so that that no

interference occurs when a person uses a compatible

phone and a compatible hearing aid at the same time.

This standard was approved by the IEEE in 2000.

FDA continues to monitor the use of wireless phones for

possible interactions with other medical devices. Should

harmful interference be found to occur, FDA will conduct

testing to assess the interference and work to resolve

the problem.

10. What are the results of the research done already?

The research done thus far has produced conflicting

results, and many studies have suffered from flaws in

their research methods. Animal experiments

investigating the effects of radiofrequency energy (RF)

exposures characteristic of wireless phones have yielded

conflicting results that often cannot be repeated in other

laboratories. A few animal studies, however, have

suggested that low levels of RF could accelerate the

development of cancer in laboratory animals. However,

many of the studies that showed increased tumor

development used animals that had been genetically

engineered or treated with cancer-causing chemicals so

as to be pre-disposed to develop cancer in the absence

of RF exposure. Other studies exposed the animals to RF

for up to 22 hours per day. These conditions are not

similar to the conditions under which people use

wireless phones, so we don t know with certainty what

154

Since there are no known risks from exposure to RF

emissions from wireless phones, there is no reason to

believe that accessories that claim to shield the head

from those emissions reduce risks. Some products that

claim to shield the user from RF absorption use special

phone cases, while others involve nothing more than a

metallic accessory attached to the phone. Studies have

shown that these products generally do not work as

advertised. Unlike “hand-free” kits, these so-called

“shields” may interfere with proper operation of the

phone. The phone may be forced to boost its power to

compensate, leading to an increase in RF absorption. In

February 2002, the Federal trade Commission (FTC)

charged two companies that sold devices that claimed to

protect wireless phone users from radiation with making

false and unsubstantiated claims. According to FTC,

these defendants lacked a reasonable basis to

substantiate their claim.

9. What about wireless phone interference with medical

equipment?

Radiofrequency energy (RF) from wireless phones can

interact with some electronic devices. For this reason,

FDA helped develop a detailed test method to measure

electromagnetic interference (EMI) of implanted cardiac

pacemakers and defibrillators from wireless telephones.

This test method is now part of a standard sponsored by

the Association for the Advancement of Medical

instrumentation (AAMI). The final draft, a joint effort by

FDA, medical device manufacturers, and many other

groups, was completed in late 2000. This standard will

allow manufacturers to ensure that cardiac pacemakers

and defibrillators are safe from wireless phone EMI.

AAppppeennddiixxAAppppeennddiixx

safety-end-NorthA 1/27/03 2:05 PM Page 154

157156

the results of such studies mean for human health.

Three large epidemiology studies have been published

since December 2000. Between them, the studies

investigated any possible association between the use of

wireless phones and primary brain cancer, glioma,

meningioma, or acoustic neuroma, tumors of the brain or

salivary gland, leukemia, or other cancers. None of the

studies demonstrated the existence of any harmful

health effects from wireless phone RF exposures.

However, none of the studies can answer questions

about long-term exposures, since the average period of

phone use in these studies was around three years.

11. What research is needed to decide whether RF

exposure from wireless phones poses a health risk?

A combination of laboratory studies and epidemiological

studies of people actually using wireless phones would

provide some of the data that are needed. Lifetime

animal exposure studies could be completed in a few

years. However, very large numbers of animals would be

needed to provide reliable proof of a cancer promoting

effect if one exists. Epidemiological studies can provide

data that is directly applicable to human populations, but

10 or more years follow-up may be needed to provide

answers about some health effects, such as cancer. This

is because the interval between the time of exposure to

a cancer-causing agent and the time tumors develop - if

they do - may be many, many years. The interpretation of

epidemiological studies is hampered by difficulties in

measuring actual RF exposure during day-to-day use of

wireless phones. Many factors affect this measurement,

such as the angle at which the phone is held, or which

model of phone is used.

12. Which other federal agencies have responsibilities

related to potential RF health effects?

Additional information on the safety of RF exposures from

various sources can be obtained from the following

organizations.

FCC RF Safety Program:

http://www.fcc.gov/oet/rfsafety/

Environmental Protection Agency (EPA):

http://www.epa.gov/radiation/

Occupational Safety and Health Administration’s (OSHA):

http://www.osha-

slc.gov/SLTC/radiofrequencyradiation/index.html

National Institute for Occupational Safety and Health

(NIOSH):

http://www.cdc.gov/niosh/emfpg.html

World health Organization (WHO):

http://www.who.int/peh-emf/

International Commission on Non-Ionizing Radiation

Protection:

http://www.icnirp.de

National Radiation Protection Board (UK):

http://www.nrpb.org.uk

Updated 4/3/2002: US Food and Drug Administration

http://www.fda.gov/cellphones

AAppppeennddiixxAAppppeennddiixx

safety-end-NorthA 1/27/03 2:05 PM Page 156

Samsung Electronics Co SGHE860V Single-Band PCS GSM Phone w/ Bluetooth Transmitter User Manual FCC FOR SGH E860V

Samsung Electronics Co Ltd Single-Band PCS GSM Phone w/ Bluetooth Transmitter FCC FOR SGH E860V

Users Manual

Navigation menu

Namespaces

Views

Navigation