Samsung Electronics Co SGHE910 Single-Band PCS GSM Phone w/ Bluetooth Transmitter User Manual FCC
Samsung Electronics Co Ltd Single-Band PCS GSM Phone w/ Bluetooth Transmitter FCC
Users Manual
* Depending on the software installed or your service provider or country,
some of the descriptions in this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear
different from the illustrations in this guide.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-xxxxxA
English. 10/2005. Rev 1.0
Serene
Guide
1
Important safety
precautions
Note
:
Failure to comply with the
following precautions may be
dangerous or illegal.
Drive safely at all times
Do not use a hand-held phone
while driving. Park the vehicle
first.
Switch off the phone when
refuelling
Do not use the phone at a refuelling
point (service station) or near fuels
or chemicals.
Switch off in an aircraft
Wireless phones can cause
interference. Using them in an
aircraft is both illegal and
dangerous.
Switch off the phone near all
medical equipment
Hospitals or health care facilities
may be using equipment that could
be sensitive to external radio
frequency energy. Follow any
regulations or rules in force.
Interference
All wireless phones may be subject
to interference, which could affect
their performance.
Be aware of special regulations
Meet any special regulations in
force in any area and always switch
off your phone whenever it is
forbidden to use it, or when it may
cause interference or danger.
Water resistance
Your phone is not water-resistant.
Keep it dry.
Sensible use
Use only in the normal position
(held to the ear). Avoid
unnecessary contact with the
antenna when the phone is
switched on.
Emergency calls
Key in the emergency number for
your present location, then press
SEND
.
Keep your phone away from
small children
Keep the phone and all its parts,
including accessories, out of the
reach of small children.
Accessories and batteries
Use only Samsung-approved
accessories and batteries. Use of
any unauthorised accessories could
damage your phone and may be
dangerous.
Notes
:
• The phone could explode if the
battery is replaced with an
incorrect type.
• Dispose of used batteries
according to the manufacturer’s
instructions.
Qualified service
Only qualified service personnel
may repair your phone.
For more detailed safety
information, see "Health and safety
information" on page 60.
2
About this Guide
This Guide provides you with
condensed information about how
to use your phone. To quickly learn
the basics for your phone, please
refer to “Get started” and “Step
outside the phone.”
In this guide, the following visual
features appear:
Note
Indicates that you need to
pay careful attention to
the subsequent
information regarding
safety or phone features.
Indicates that you can get
more information on the
referenced page.
→
Indicates that you need to
press the Navigation keys
to scroll to the specified
option and then select it.
BOLD
Indicates a key on the
phone. For example,
OK
Bluetooth
Transfer media files
and personal data
and connect to other
devices using free,
wireless Bluetooth
technology.
Camera
Use the camera
module on your
phone to take a
photo.
Web browser
Access the wirelsess
web and access
various services and
current information.
Get personal with
photo caller ID
See who’s calling
you with their very
own photo displays.
Name card
Create name cards
with your number
and profile.
Multimedia Message Service
(MMS)
Send and receive MMS
messages with a combination
of text, images, and audio.
E-mail
Send and receive e-mails with
images and audio attachments.
Organiser
Keep track of your
daily, weekly, and
monthly schedule.
Voice recorder
Record memos or
sounds.
Special features of your phone
3
Contents
Your phone, 5
Get started, 6
Install SIM and phone 6
Charge the phone 7
Power on or off 8
Keys 8
Display 9
Access menu functions 10
Customise your phone 10
Make/Answer calls 11
Step outside the phone, 12
Use camera 12
Browse the web 12
Use Phonebook 13
Send messages 13
View messages 14
Use Bluetooth wireless 15
Enter text, 16
Call functions, 18
Messages, 21
Camera, 31
WAP browser, 34
Organiser, 36
Library, 39
Phonebook, 41
Call log, 44
Applications, 45
Settings, 48
SIM services, 57
Solve problems, 58
Health and safety information, 60
Index, 81
4
1 Messages
p. 21
1 Create
2 Inbox
3 Outbox
4 Drafts
5 Sent
6 Email box
7 My folders
8 Text template
9 Settings
0 Memory status
p. 21
p. 23
p. 25
p. 25
p. 25
p. 25
p. 26
p. 27
p. 27
p. 30
2 Camera
p. 31
1 Single shot
2 Multi shot
3 NIght shot
4 Go to photos
5 Effects
6 Settings
p. 31
p. 32
p. 32
p. 33
p. 33
p. 33
3 WAP browser
p. 34
1 Home
2 Bookmarks
3 Enter URL
4 WAP profile
5 Clear cache
p. 34
p. 35
p. 35
p. 35
p. 35
4 Organiser
p. 36
1 Month view
2 Week view
3 Day view
4 Appointments
5 Anniversary
6 To do
7 Memo
8 Delete all
9 Missed events
0 Memory status
p. 36
p. 38
p. 38
p. 38
p. 38
p. 38
p. 38
p. 38
p. 38
p. 38
5 Library
p. 39
1 Images
2 Sounds
3 Other files
4 Memory status
p. 39
p. 39
p. 40
p. 40
6 Phonebook
p. 41
1 Contacts list
2 Add new contact
3 Group
4 Speed dial
5 My business card
6 Own number
7 Settings
8 Copy to SIM
9 Delete all
0 Memory status
Service Numbers
*
p. 41
p. 41
p. 42
p. 42
p. 43
p. 43
p. 43
p. 43
p. 43
p. 43
p. 43
7 Call log
p. 44
1 Recent calls
2 Missed calls
3 Dialled calls
4 Received calls
5 Delete all
6 Call time
p. 44
p. 44
p. 44
p. 44
p. 44
p. 44
8 Applications
p. 45
1 Voice memo
2 World clock
3 Alarm
4 Calculator
5 Currency converter
6 PIM sync
p. 45
p. 46
p. 46
p. 46
p. 47
p. 47
9 Settings
p. 48
1 Time & Date
2 Phone settings
3 Display settings
4 Sound settings
5 Network services
6 Bluetooth
7 Security
8 Connection settings
9 Docking station
0 Reset settings
p. 48
p. 48
p. 48
p. 49
p. 49
p. 51
p. 54
p. 55
p. 56
p. 56
0 SIM services
*
p. 57
* Shows only if supported by your
SIM card.
Menu functions
To access Menu mode, press
OK
in Idle mode.
5
Your phone
You can obtain various
accessories from your local
Samsung dealer.
Note
: The items supplied with
your phone and the accessories
available at your Samsung dealer
may vary, depending on your
country or service provider.
Unpack
Phone
Using the phone
Hold the phone with the display
down.
If you want to use the phone with
the display up, rotate the display
orientation 180 degrees by
pressing
OK
in Idle mode and
selecting
Settings
→
Phone
settings
→
Table mode
.
Phone Battery User’s Guide
Travel Adapter Desktop charger Screwdriver
Wheel
SEND key
Display
Menu access/
Confirm key
(OK key)
Delete/Cancel key (C key)
END key
Service light
Keypad
Microphone
Camera lens
6
Get started
SIM card information
When you subscribe to a cellular
network, you receive a plug-in SIM
(Subscriber Identity Module) card
loaded with your subscription
details, such as your PIN code and
available optional services.
Removing the battery
Lift the battery away, as shown.
Install SIM and phone
1. If the phone is already on, first
turn it off by pressing and holding
END
.
2. Loosen the screws on the sides
using the supplied screwdriver.
3. Lift the battery cover away, as
shown.
4. Insert the SIM card.
Note
: Make sure that the gold-
coloured contacts on the card face
down into the phone.
5. Install the battery.
6. Align the cover with the bottom of
the phone and press the cover
down, as shown.
7. Screw on the battery cover.
7>> Get started
Charge the phone
Using the travel adapter
1. Plug the travel adapter into the
phone.
2. Plug the adapter into a standard
AC wall outlet.
3. When the phone is completely
charged (the battery icon becomes
still), unplug the adapter from the
power outlet.
4. Remove the adapter from the
phone.
Using the desktop charger
Place the desktop charger on a flat
place and plug the phone into the
charger, as shown.
While charging,
• the display orientation rotates 180
degrees.
• when you receive an incoming
message, the phone automatically
opens.
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the battery low message displays,
and
• the empty battery icon
blinks.
If the battery level becomes too low,
the phone automatically turns off.
Recharge your battery.
8
Power on or off
To switch the phone on
1. Open the phone.
2. Press and hold
END
to turn on the
phone.
3. If necessary, enter the PIN code
and press
OK
.
Note
: Do not turn on the phone where
mobile phone use is prohibited.
To switch the phone off
1. Open the phone.
2. Press and hold
END
.
Keys
SEND
(Left green)
- Make or answer a call.
- In Idle mode, retrieve the
recent numbers dialled,
missed, or received.
- In Capture mode, take a
photo.
- In Record mode for a
voice memo, start
recording.
END
(Right red)
- End a call.
- Press and hold to switch
the phone on and off.
- In Menu mode, cancel
input and return the phone
to Idle mode.
OK
(Down)
- In Idle mode, access
Menu mode.
- In Menu mode, select a
highlighted menu option
or confirm input.
- In Capture mode, take a
photo.
C
(Up)
- Delete characters from the
display.
- In Menu mode, return to
the previous menu level.
9>> Get started
Display
Layout
Icons
wheel
- In Idle mode, move the
wheel clockwise or
counterclockwise to
search for a Phonebook
entry.
- In Menu mode, scroll
through the menu options.
Enter numbers, letters, and
special characters.
In Idle mode, press and hold
1
to access your voicemail
server. Press and hold
0
to
enter an international call
prefix.
Enter special characters.
In Idle mode, press and hold
to activate or deactivate
Quiet mode.
Press and hold to enter a
pause between numbers.
Icons
Displays various icons.
Text and
graphics
Displays messages,
instructions, and
information you enter.
Strength of the received
signal
Call in progress
Outside your service area;
you cannot send or receive
calls
Active roaming network
GPRS network
GSM network
Home zone, if you have
subscribed to this service
Text and
graphics
Icons
10
Access menu functions
To select an option
1. Press
OK
to access Menu mode.
2. Move the wheel clockwise or
counterclockwise to scroll through
menus.
3. Press
OK
to confirm the function
displayed or option highlighted.
4. To exit, either:
•Press
C
to move up one level.
•Press
END
to return to Idle
mode.
To use shortcuts
Press the number key for the option
you want.
Customise your phone
Display language
1. In Idle mode, press
OK
and select
Settings
→
Phone settings
→
Language
.
2. Select a language.
Ringtone
1. In Idle mode, press
OK
and select
Settings
→
Sound settings
→
Ringtone
.
2. Select a ringtone.
City zone, if you have
subscribed to this service
Call diverting feature active
Bluetooth feature activated
Connected with a Bluetooth
headset or hands-free car
kit
New text message
/New multimedia message
New e-mail
New voicemail
Alarm set
Call ringer set to vibrate
Quiet mode
Battery power level
11 >> Get started
Display item
You can select your display item for
the idle screen.
1. In Idle mode, press
OK
and select
Settings
→
Display settings
→
Idle display
.
2. Select a display item.
Quiet mode (Silent)
You can quickly switch the phone to
Quiet mode to avoid disturbing other
people.
Press and hold in Idle mode.
Phone lock
You can protect the phone against
unauthorised use with a phone
password. The phone will require the
password on power-up.
1. In Idle mode, press
OK
and select
Settings
→
Security
→
Change
password
.
2. Enter the default password,
00000000
, and press
OK
.
3. Enter a new 4- to 8-digit password
and press
OK
.
4. Enter the new password again and
press
OK
.
5. Select
Phone lock
.
6. Select
Enable
.
7. Enter the password and press
OK
.
Make/Answer calls
Make a call
1. In Idle mode, enter an area code
and phone number.
2. Press
SEND
.
3. To end the call, press
END
.
Answer a call
1. When the phone is ringing, press
SEND
.
2. To end the call, press
END
.
Adjust the volume during a call
Move the wheel clockwise or
counterclockwise.
12
Step outside the phone
Use camera
Take a photo
1. In Idle mode, press
OK
and select
Camera
.
2. Select the shooting mode you
want,
Single shot
,
Multi shot
, or
Night shot
.
3. If you select
Multi shot
, select the
number of shots for the camera to
take.
4. Adjust the image to be captured.
5. Press
SEND
or
OK
to take a
photo. The photo is saved
automatically.
6. Press
OK
and select
Tak e
another
to take another photo.
View a photo
1. In Idle mode, press
OK
and select
Camera
→
Go to photos
.
2. Select the photo you want.
Browse the web
Using a built-in web browser, you can
get easy access to the wireless web to
receive up-to-date information, use
services, and download web content.
Launch the web browser
In Idle mode, press
OK
and select
WAP browser
→
Home
.
Navigate the web
• To scroll through browser items,
move the wheel clockwise or
counterclockwise.
• To select a browser item, press
OK
and select
Select
.
• To return to the previous page,
press
C
.
• To access web page options, press
OK
.
13 >> Step outside the phone
Use Phonebook
Add an entry
From the Idle mode:
1. Enter a phone number.
2. Press
OK
and select
Save
number
→
a number type.
3. Specify the contact information:
First name, Mobile, Home, Office,
Email, Caller ID, and Group.
4. Select
Save
to save the entry.
After ending a call:
1. Press
OK
and select
Save
number
.
2. Enter a name and specify other
contact information.
3. Select
Save
to save the entry.
Find an entry
1. In Idle mode, move the wheel
clockwise or counterclockwise to
access Phonebook.
2. Select the first character of the
name you want to find and scroll
to the name.
3. To dial, press
SEND
.
If the name has more than one
number, scroll to the number you
want and press
SEND
.
4. To view the contact information,
press
OK
and select
View
.
Create and send your name card
1. In Idle mode, press
OK
and select
Phonebook
→
My business card
.
2. Specify your contact information.
3. Select
Save
to save the name card.
4. To send the name card to other
people via Bluetooth, press
OK
and select
Send business card
.
Send messages
Send a text message (SMS)
1. In Idle mode, press
OK
and select
Messages
→
Create
→
Text
message
.
2. Enter the message text.
3. Press
OK
and select
Send and
save
or
Send only
.
4. Enter destination numbers.
5. Press
SEND
to send the message.
Send a multimedia message (MMS)
1. In Idle mode, press
OK
and select
Messages
→
Create
→
Multimedia message
.
2. Select
Subject
.
3. Enter the message subject and
press
OK
.
4. Select
Picture
→
Add image
, or
select
Sound
→
Add sound
.
5. Add an image or sound.
6. Select
Message
→
Add
.
7. Enter the message text.
14
8. Press
OK
and select
Done
.
9. Press
OK
and select
Send
.
10.Enter destination numbers or
addresses.
11.Press
SEND
to send the message.
Send an e-mail
1. In Idle mode, press
OK
and select
Messages
→
Create
→
Email
.
2. Select
Subject
.
3. Enter the e-mail subject and press
OK
.
4. Select
Message
→
Add
.
5. Enter the e-mail text.
6. Press
OK
and select
Done
.
7. Select
File attach
.
8. Add media files, name cards,
calendar data, or other files.
9. Press
OK
and select
Send
.
10.Enter destination addresses.
11.Press
SEND
to send the e-mail.
View messages
View a text message
When a notification appears:
1. Press
OK
.
2. Select the message from the
Inbox.
From the Inbox:
1. In Idle mode, press
OK
and select
Messages
→
Inbox
.
2. Select a message ( ).
View a multimedia message
When a notification appears:
1. Press
OK
and select
Retrieve
.
2. Select the message from the
Inbox.
From the Inbox:
1. In Idle mode, press
OK
and select
Messages
→
Inbox
.
2. Select a message ( ).
View an e-mail
1. In Idle mode, press
OK
and select
Messages
→
Email box
.
2. Select an account.
3. Press
OK
when
Check new
Email
is displayed to download
an e-mail or a header.
4. Select an e-mail or a header.
5. If you selected a header, press
OK
and select
Retrieve
.
15 >> Step outside the phone
Use Bluetooth wireless
Your phone is equipped with
Bluetooth technology which enables
you to connect the phone wirelessly
to other Bluetooth devices and
exchange data with them, talk hands-
free, or control the phone remotely.
Turn on Bluetooth
In Idle mode, press
OK
and select
Settings
→
Bluetooth
→
Activation
→
On
.
Search for and pair with a
Bluetooth device
1. In Idle mode, press
OK
and select
Settings
→
Bluetooth
→
My
devices
→
Search new device
.
2. Select a device.
3. Enter a Bluetooth PIN code or the
other device’s Bluetooth PIN
code, if it has one, and press
OK
.
When the owner of the other
device enters the same PIN code,
pairing is complete.
Send data
1. Access an application, such as
Phonebook
,
Library
, or
Organiser
.
2. Scroll to an item.
3. Press
OK
and select
Send
or
Send
business card
→
Via Bluetooth
.
4. Select a device.
5. If necessary, enter the Bluetooth
PIN code and press
OK
.
Receive data
1. Activate the Bluetooth feature.
2. Set other Bluetooth devices to
search for your phone in the
My
phone’s visibility
option.
3. If necessary, press
OK
to confirm
the reception.
16
Enter text
You can enter text for some features
such as Messages, Phonebook, or
Calendar, using ABC mode, T9
mode, Number mode, and Symbol
mode.
Changing the text input mode
• Press and hold to switch
between T9 and ABC modes.
• Press to change case or switch
to Number mode.
• Press and hold to switch to
Symbol mode.
Using T9 mode
T9 is a predictive text input mode that
allows you to key in any character
using single keystrokes.
Entering a word in T9 mode
1. Press
2
to
9
to start entering a
word. Press each key once for
each letter.
For example, press
4
,
3
,
5
,
5
, and
6
to enter
Hello
in T9 mode.
T9 predicts the word that you are
typing, and it may change with
each key that you press.
2. Enter the whole word before
editing or deleting characters.
3. When the word displays correctly,
go to step 4. Otherwise, press
0
to
display alternative word choices
for the keys that you have pressed.
For example,
Of
and
Me
use
6
and
3
.
4. Press to insert a space and enter
the next word.
Tips for using T9 mode
•Press
1
to enter periods or
apostrophes automatically.
• Move the wheel clockwise or
counterclockwise to move the
cursor.
•Press
C
to delete characters one
by one. Press and hold
C
to clear
the entire display.
17 >> Enter text
Using ABC mode
Press the appropriate key until the
character you want appears on the
screen.
(Creating an SMS message with GSM-
alphabet encoding)
Tips for using ABC mode
• To enter the same letter twice or to
enter a different letter on the same
key, wait for the cursor to move to
the right automatically or move
the wheel clockwise. Then, enter
the next letter.
• Press to insert a space.
• Move the wheel clockwise or
counterclockwise to move the
cursor.
• Press
C
to delete characters one
by one. Press and hold
C
to clear
the entire display.
Using Number mode
Number mode enables you to enter
numbers. Press the keys
corresponding to the digits you want.
Using Symbol mode
Symbol mode enables you to insert
symbols.
• To access a symbol, move the
wheel clockwise or
counterclockwise.
• To insert the symbol in the
message, press
OK
.
Key Upper case Lower case
1
. , - ‘ / 1
2
A B C 2 a b c 2
3
D E F 3 d e f 3
4
G H I 4 g h i 4
5
J K L 5 j k l 5
6
M N O 6 m n o 6
7
P Q R S 7 p q r s 7
8
T U V 8 t u v 8
9
W X Y Z 9 w x y z 9
0
0
18
Call functions
Making a call
1. In Idle mode, enter the area code
and phone number.
2. Press
SEND
.
Notes
:
• Press
C
to clear the last digit or
press and hold
C
to clear the
whole display. You can move the
cursor to edit an incorrect digit.
• Press and hold to enter a pause.
Making an international call
1. In Idle mode, press and hold
0
.
The
+
character appears.
2. Enter the country code, area code,
and phone number, then press
SEND
.
Redialling recent numbers
1. In Idle mode, press
SEND
to
display the list of recent numbers.
2. Scroll to the number you want and
press
SEND
.
Making a call from Phonebook
Once you have stored a number in
Phonebook, you can dial the number
by selecting it from Phonebook.
p.
41
You can also use the speed dial
feature to assign your most frequently
called numbers to specific number
keys.
p. 42
You can quickly dial a number from
the SIM card using its location
number assigned when stored.
1. In Idle mode, enter a location
number and press .
2. Press
SEND
to dial the number.
Ending a call
Close the phone or press
END
.
Answering a call
When you receive an incoming call,
the phone rings and displays the
incoming call image.
Press
SEND
to answer the call, or
press
OK
and select
Accept
.
Tips for answering a call
•When
Anykey
Answer
is active,
you can press any key, except
END
and
OK
.
p. 48
•When
Active Folder
is active,
you can simply open the
phone.
p. 48
•Press
END
to reject a call, or press
OK
and select
Reject call
.
19 >> Call functions
Viewing missed calls
If you have missed calls, the screen
displays how many calls you have
missed.
1. Press
OK
.
2. If necessary, scroll through the
missed calls.
3. Press
SEND
to dial the number
you want.
Options during a call
You can access a number of functions
during a call.
Adjusting the volume during a
call
Use the wheel to adjust the earpiece
volume during a call.
Move the wheel clockwise to increase
the volume level and
counterclockwise to decrease the
volume level.
Placing a call on hold/Retrieving
Press
OK
and select
Hold
to place a
call on hold, or select
Retrieve
to
retrieve a call on hold.
Making a second call
You can make another call if your
network supports it.
1. Press
OK
and select
Hold
to put
the call on hold.
2. Make the second call in the
normal way.
3. Press
OK
and select
Switch calls
to switch between the calls.
4. Press
OK
and select
End
held
call
to end the call on hold.
5. To end the current call, press
END
.
Answering a second call
You can answer an incoming call
while already on the phone, if your
network supports it and you have
activated the call waiting
feature.
p. 50
1. Press
SEND
to answer the call.
The first call is automatically put
on hold.
2. Press
OK
and select
Switch calls
to switch between the calls.
3. Press
OK
and select
End
held
call
to end the call on hold.
4. To end the current call, press
END
.
20
Using In-call options
Press
OK
to access the following
options during a call:
•
Switch to headset
/
Switch to
phone
: switch the call to a
Bluetooth headset or hands-free
car kit, or back to the phone.
•
Menu
: access the phone's menu
functions.
•
Mute
/
Unmute
: switch the phone's
microphone off or on. When the
microphone is switched off, the
person on the other end of the line
will not be able to hear you.
•
Mute key tone
/
Send keys
: switch
the key tones on or off.
Note
: T
o communicate with
answering machines or
computerised telephone systems,
Send keys
must be selected.
•
Send DTMF
: send the DTMF
(Dual tone multi-frequency) tones
as a group. The DTMF tones are
the tones used in phones for tone
dialling, sounding when you press
the number keys. This option is
helpful for entering, for example,
a password or an account number
for an automated banking service.
•
Phonebook
: access the
Phonebook list.
•
SIM service
: access special
services, such as news, weather,
entertainment, and location
services, provided by your SIM
card. This option is available
when you use a SIM card
supporting SIM AT menus.
•
End held call
: disconnect the call
currently on hold.
•
Transfer
: transfer the currently
active call to a caller on hold. The
two callers can talk to each other,
but you are disconnected from the
call.
•
Join calls
: set up a multi-party
call by adding a caller on hold to a
currently active call. You can
include up to 5 people on a multi-
party call.
•
Private
: have a private
conversation with one multi-party
call participant. The other
participants can converse with
each other. After the private
conversation, select
Join
to return
to the multi-party call.
•
Reject call
: disconnect one multi-
party call participant.
21
Messages
You can send and receive text messages,
multimedia messages, and e-mails. You
can also use Push Message and Cell
Broadcast Message features.
To access this menu, press
OK
in Idle
mode and select
Messages
.
Create
(Menu 1.1)
Use this menu to create and send text
messages, multimedia messages, or e-
mail.
Text message
(Menu 1.1.1)
Short Message Service (SMS) allows
you to send or receive text messages.
Note
:
The maximum number of
characters allowed in a text message
varies by service provider. If your
message exceeds the maximum number of
characters, the phone will split the
message.
1. Enter your message.
2. Press
OK
to access the following
options:
•
Insert
: insert a Phonebook entry,
bookmark, or text template to
text.
•
Attach
: attach a name card or
calender data as a data format
attachment.
3. When you have finished, press
OK
and select
Send and save
or
Send
only
.
4. Enter a destination phone number.
5. Press
SEND
to send the message.
Multimedia message
(Menu 1.1.2)
Multimedia Message Service (MMS)
delivers messages containing a
combination of text, image, and audio,
from phone to phone or from phone to
e-mail.
1. Select the
Subject
line.
2. Enter the subject of your message
and press
OK
.
3. Select the
Picture
or
Sound
line.
4. Select
Add image
or
Add sound
and add an image or a sound.
Notes
:
• The maximum size allowed for an
MMS message can differ
depending on your service
provider.
• The DRM (Digital Rights
Management) system and the file
type determine which files can or
cannot be forwarded.
5. Select the
Message
line and select
Add
.
6. Enter the message text.
Press
OK
and select
Insert
to insert
a text template, Phonebook entry, or
bookmark to text.
7. Press
OK
and select
Done
.
22
8. Press
OK
to access the following
options for editing the message:
•
Edit/Edit message
: edit the
subject or text.
•
Clear subject
/
Clear message
:
clear the subject or text.
•
Change image
/
Change sound
:
change an added image or
sound.
•
Remove image
/
Remove
sound
: remove an added image
or sound.
•
Add page
: add pages. Move to
each page by selecting
Next
Page
on the message screen, or
selecting
Page move
from the
option list.
•
Delete page
: delete an added
page.
•
Page timing
: change the
duration of page display.
•
Attach
: attach a name card or
calender data as a data format
attachment.
9. When you have finished, press
OK
and select
Send
.
10.Enter a phone number or e-mail
address.
11.Press
SEND
to send the message.
Email
(Menu 1.1.3)
You can send e-mails that include
text, images, and audio. To use this
feature, you need to subscribe to an
e-mail service and set up your e-mail
account and profile.
p. 29
1. Select the
Subject
line.
2. Enter the subject of your e-mail
and press
OK
.
3. Select the
Message
line and select
Add
.
4. Enter the e-mail text.
Press
OK
and select
Insert
to
insert a Phonebook entry,
bookmark, or text template to text.
5. Press
OK
and select
Done
.
6. Select the
Attach fils(s)
line.
7. Select one of the following
options for adding files:
•
Images
/
Sounds
: add images or
sounds. You can also create and
add an item to your e-mail.
Note
: The DRM (Digital
Rights Management) system
and the file type determine
which files can or cannot be
forwarded.
•
Business card
: add name cards
as a data format attachment.
23 >> Messages
•
Appointment
/
Anniversary
/
Memo
/
To do
: add calendar
data as a data format
attachment.
•
Other files
: add files in a
format which your phone does
not support.
8. Press
OK
to access the following
options for editing the message:
•
Edit
: edit the subject or text.
•
Clear subject
/
Clear message
:
clear the subject or text.
•
Remove attachment
: remove
the selected attachment.
•
Remove all attachments
:
remove all attachments.
9. When you have finished, press
OK
and select
Send
or
Save and
Send
.
10.Enter an e-mail address.
To send the e-mail to more than
one recipient, fill in additional
destination fields.
11.Press
SEND
to send the e-mail.
Inbox
(Menu 1.2)
Use this menu to store all messages
you have received, except e-mails.
The following icons may appear on
the message list to show the message
type:
• SMS
• MMS
• MMS notification
( : Being retrieved,
: Failed to retrieve)
• Push messages from web
servers
• Configuration messages,
containing network
parameters from your
service provider
• CB messages from your
service provider
• Delivery report for your sent
messages
Notes
:
•
The DRM (Digital Rights
Management) system limits the
forwarding of some messages
containing web content. They are
indicated by
.
•
A
! icon next to a message means
that a message is of high priority.
A grey-coloured message icon is
of low priority.
Viewing a message
1. Scroll to the message you want.
2. Press
OK
and select
View
.
24
Using message options
While viewing a message, press
OK
to access the following options:
SMS messages
•
Reply
: send a reply message to
the sender.
•
Forward
: forward the message to
other people.
•
Delete
: delete the message.
•
Extract address
: extract URLs,
e-mail addresses, or phone
numbers from the message.
•
Extract media
: save media
content from the message into
your phone’s memory.
MMS notifications/MMS messages
•
Retrieve
: (for MMS notification)
retrieve the message from the
server.
•
Reply
: send a reply message to
the sender.
•
Forward
: forward the message to
other people.
•
Delete
: delete the message.
•
Extract
address
: extract URLs,
e-mail addresses, or phone
numbers from the message.
•
Extract media
: save media
content from the message into
your phone’s memory.
•
Details
: view the message
properties.
Configuration messages
•
Install
: apply the configuration
specified in the message to your
phone.
•
Delete
: delete the message.
•
Extract
address
: extract URLs,
e-mail addresses, or phone
numbers from the message.
Push messages
•
Go to URL
: connect to the URL
specified in the message.
•
Delete
: delete the message.
•
Extract
address
: extract URLs,
e-mail addresses, or phone
numbers from the message.
CB messages
•
Save
: save the message to the
phone’s memory.
•
Extract
address
: extract URLs,
e-mail addresses, or phone
numbers from the message.
•
Delete
: delete the message.
Delivery report messages
•
Extract
address
: extract URLs,
e-mail addresses, or phone
numbers from the message.
•
Delete
: delete the message.
25 >> Messages
Outbox
(Menu 1.3)
This folder stores messages that the
phone is attempting to send or has
failed to send.
While viewing a message, press
OK
to access the following options:
•
Send again
: resend the message.
•
Delete
: delete the selected
message.
•
Delete all
: delete all messages.
•
Move to my folder
: move the
message to one of the folders you
have created in
My folders
.
•
Details
: view the message
properties.
Drafts
(Menu 1.4)
This folder stores messages you have
saved to send at a later time.
Press
OK
and select
Edit
to edit and
send the message.
Sent
(Menu 1.5)
This folder stores messages that you
have sent successfully.
While viewing a message, press
OK
to access the following options:
•
Forward
: forward the message to
other people.
•
Sort
: change the sort order of the
messages.
•
Delete
: delete the selected
message.
•
Move to my folder
: move the
message to one of the folders you
have created in
My folders
.
•
Details
: view the message
properties.
Email box
(Menu 1.6)
This folder stores e-mails that you
have received.
Viewing an e-mail
1. Select an e-mail account.
2. Press
OK
when
Check new email
displays, or press
OK
and select
Check new email
.
The phone checks for new e-mails
and downloads received e-mails.
The following icons may appear
on the list to show the e-mail
status:
• : Retrieved from the server
• : Being retrieved
• : Failed to retrieve
Note
:
A
! icon next to a message
means that a message is of high
priority. A grey-coloured message
icon is of low priority.
3. Scroll to an e-mail or header and
press
OK
and select
View
.
4. If the e-mail has more than one
page, move the wheel clockwise
or counterclockwise to scroll
through pages one by one.
5. Select an attached file to view or
play it.
26
Using e-mail options
While viewing the e-mail or header,
press
OK
to access the following
options:
•
Reply
: send a reply message.
•
Forward
: forward the e-mail to
other people.
•
Retrieve
: (for headers) retrieve
the body of the e-mail from the
e-mail server.
•
Delete
: delete the selected
e-mail.
•
Extract address
: extract URLs,
e-mail addresses, or phone
numbers from the message.
•
Extract media
: save media
content from the message into
your phone’s memory.
•
Details
: view the e-mail
properties.
While viewing the e-mail list, press
OK
to access the following options:
•
View
: open the selected item.
•
Check new email
: check the
Email box for new e-mails.
•
Reply
: send a reply message.
•
Forward
: forward the e-mail to
other people.
•
Sort
: change the order of the
e-mails.
•
Delete
: delete the selected
e-mail.
•
Delete all
: delete all e-mails.
•
Add to filtering list
: add the
sender’s e-mail address or e-mail
subject to the Block list to reject e-
mails from that address or
containing that subject.
•
Move to my folder
: move the e-
mail to one of the folders you have
created in
My folders
.
•
Details
: view the e-mail
properties.
My folders
(Menu 1.7)
Use this menu to create new folders
and organise your messages.
Creating a new folder
Enter a name for the folder and press
OK
.
Note
: If there are any folders created,
select
Create
.
Using folder options
On the folder list, press
OK
to access
the following options:
•
Open
: open the folder.
•
Change folder name
: change the
name for the folder.
•
Delete
: delete the selected folder.
•
Delete all
: delete all folders.
27 >> Messages
Text template
(Menu 1.8)
Use this menu to make and use
templates of frequently used
messages.
Creating a text template
1. Select an empty location.
2. Enter a message.
3. Press
OK
and select
Done
.
Using template options
From the template list, press
OK
to
access the following options:
•
Send & Save
: send a new
message using the template and
save the message in the Sent box.
•
Send only
: send a new message
using the template.
•
Delete all
: delete all templates.
Settings
(Menu 1.9)
Use this menu to set up various
options for using the messaging
service.
Text message
(Menu 1.9.1)
You can change the default SMS
settings.
•
Send settings
: set up the
following options for sending a
text message:
Reply path
: allow the recipient to
reply to you through your message
server.
Delivery report
: set the network
to inform you when your message
has been delivered.
Character support
: select a
character encoding type. If you
select
Automatic
, the phone
switches the encoding type from
GSM-alphabet to Uni-code if you
enter a Unicode character. Use of
Unicode encoding will reduce the
maximum number of characters in
a message to about half.
If this menu is not shown, your
phone provides the automatic
character encoding by default.
Bearer selection
: select either
GSM
or
GPRS preferred
,
depending on your network.
•
Profile settings
: select a profile or
edit a profile. Press
OK
and select
Edit
to access the following
properties in a profile:
Service centre
: store or change
the number of your message
server.
Default destination
: enter the
default destination. It will be
displayed in the first field on the
destination field.
Default type
: set the default
message type. The network can
convert the messages into the
selected format.
Default validity
: set the length of
time your messages are stored in
the SMS server.
Setting name
: enter a name for
the profile.
Multimedia message
(Menu 1.9.2)
28
You can change the default MMS
settings.
•
Send settings
: set up the
following options for sending a
multimedia message:
Delivery report
: set the network
to inform you when your message
has been delivered.
Hide address
: set your address to
be hidden from the recipient’s
phone.
Read reply
: determine whether or
not your phone sends a read-reply
request.
Priority
: set the priority level of
your messages.
Expiry date
: set the length of
time your messages are stored in
the MMS server.
Delivery time
: set a time delay
before messages are sent.
Outgoing message size
: select a
maximum size of attached items
allowed for an MMS message.
•
Retrieve settings
: set up the
following options for receiving a
multimedia message:
Reject unknown sender
: reject
messages from unknown senders.
Advert allowed
: accept
advertisements.
Information allowed
: accept
information messages.
Personal allowed
: accept
personal messages.
Report allowed
: send a delivery
report from the network to the
sender.
Home reception
: determine if
your phone retrieves new
messages automatically when you
are in your home service area.
Roaming reception
: determine if
your phone retrieves new
messages automatically when you
are roaming in another network.
Home reception
and
Roaming
reception
have the following
options:
•
Automatic
: the phone
automatically retrieves
messages from the server.
•
Reject
: the phone rejects all
messages.
•
Manual
: the phone displays
notifications. Use the
Retrieve
option to manually retrieve new
messages.
•
Profile
: select a connection profile
to be used for MMS.
Note
:
You can edit a profile using
the
Connection settings
menu.
p. 55
29 >> Messages
Email
(Menu 1.9.3)
You can configure the default
network settings.
Note
:
You cannot change e-mail profile
settings while an e-mail is being sent or
retrieved.
•
Send settings
: set up the
following options for sending an
e-mail:
Delivery report
: set the network
to inform you when your e-mail
has been delivered.
Reply to address
: set recipients to
send read-reply messages to your
e-mail address.
Priority
: select the priority level
of your e-mail.
Include signature
: attach your
name, phone number, or simple
memo to your e-mail.
Edit name
: enter your name.
Edit telephone number
: enter
your phone number.
Edit note
: enter a simple memo.
•
Receive settings
: set up the
following options for receiving an
e-mail:
Check interval
: determine how
often the phone checks the server
for incoming e-mails.
If this option is set to
Do not
notify
, you can use the
Check
new email
option to check your
e-mail manually.
Read reply
: determine whether or
not your phone sends a read-reply.
When this option is set to
Announce
, the phone asks you to
send a read-reply to the sender.
Reject if larger than
: determine
the maximum size for incoming
e-mails.
Leave copy on server
: leave
copies of e-mails on the e-mail
server after retrieving.
•
Block list
: access e-mail
addresses or e-mail subjects in
Block list. You can also specify
and delete the e-mail addresses or
e-mail subjects.
•
Email account
: select an account
to be used or set up an e-mail
account. Press
OK
and select
Edit
to access the following properties
for each account:
Account name
: enter a name for
the selected account.
User name
: enter a user name.
Email address
: enter your e-mail
address.
User ID
: enter your e-mail ID.
Password
: enter your e-mail
password.
SMTP server
: enter the IP
address or domain name of the
outgoing e-mail server.
SMTP port
: enter the SMTP port
number.
Protocol type
: select the protocol
for the incoming
e-mail server. The remaining
30
options depend on the protocol
type setting.
When the protocol type is
POP3
:
POP3 server
:
enter the IP address
or domain name of the server that
receives your e-mail.
POP3 port
: enter the POP3 port
number.
APOP login
: connect to the server
by using the APOP login scheme
when this option is selected.
When the protocol type is
IMAP4
:
IMAP4 server
:
enter the IP
address or domain name of the
server that receives your e-mail.
IMAP4 port
: enter the IMAP4
port number.
Include attachments
: select this
option to receive attachments with
e-mails.
Email retrieval limit
: set the
number of headers you will
retrieve from the server.
•
Email profile
: select a connection
profile to be used for e-mail
services.
Note
:
You can edit a profile using
the
Connection settings
menu.
p. 55
Push message
(Menu 1.9.4)
You can change the settings for
receiving push messages from the
wireless web server.
•
Receive
: set how your phone
receives push messages.
•
Service centre
: enter the address
of the server from which you want
to receive push messages, when
the
Receive
option is set to
SMS-
C specific
.
Broadcast
(Menu 1.9.5)
You can change the settings for
receiving CB messages.
•
Receive
: select the reception of
CB messages.
•
Channel list
: indicate the
channels from which you wish to
receive CB messages. Please
contact your service provider for
further details.
•
Language
: select the preferred
languages in which broadcast
messages display.
Memory status
(Menu 1.0)
Use this menu to view the maximum
memory and available memory for
each message type. You can also view
the memory currently in use in each
folder.
31
Camera
You can use the built-in camera module
to take photos in various modes. The
camera produces JPEG photos.
To access this menu, press
OK
in Idle
mode and select
Camera
.
Notes
:
• Do not take photos of people without
their permission.
• Do not take photos in a place where
cameras are not allowed.
• Do not take photos in a place where
you may interfere with another
person’s privacy.
Single shot
(Menu 2.1)
You can take a photo in Single shot
mode.
Note
:
When you take a photo in direct
sunlight or in bright conditions, shadows
may appear on the photo.
Taking a single shot
1. From the Camera menu screen,
select
Single shot
.
2. When the camera turns on and an
image appears on the display,
position yourself at a right angle to
the subject and aim the camera lens
at the subject.
Notes
:
• Be careful not to cover the camera
lens with your hand.
• Tilt and rotate the phone until the
subject is in the centre of the
image.
• To change the colour tone of
photos, press
C
and select
Effects
.
3. Press
SEND
or
OK
to take a photo.
The photo is saved in the
Photos
folder.
Using photo options
After taking a single shot, press
OK
to
access the following options:
•
Take another
: return to Capture
mode to take another photo.
•
Send via
: send the photo via MMS,
e-mail, or Bluetooth.
•
Set as caller ID
: set the photo as a
caller ID image for a Phonebook
entry.
•
Delete
: delete the selected photo.
•
Rename
: change the name of the
photo.
•
Go to photos
: go to the
Photos
folder.
p. 39
•
Protection
: lock the photo to protect
it from being deleted, or unlock the
photo.
•
Details
: view the photo properties.
32
Multi shot
(Menu 2.2)
You can take a series of action stills
in Multi shot mode.
Note
:
When you take a photo in direct
sunlight or in bright conditions,
shadows may appear on the photo.
Taking a multi-shot series
1. From the Camera menu screen,
select
Multi shot
.
2. Select the number of photos to be
taken.
3. When the camera turns on and an
image appears on the display,
position yourself at a right angle
to the subject and aim the camera
lens at the subject.
Notes
:
• Be careful not to cover the
camera lens with your hand.
• Tilt and rotate the phone until
the subject is in the centre of
the image.
• To change the colour tone of
photos, press
C
and select
Effects
.
4. Press
SEND
or
OK
to take a
photo. The selected number of
photos will be taken in succession.
The photos are saved in the
Photos
folder.
Using photo options
After taking a multi shot, press
OK
to
access the options.
p. 31
Night shot
(Menu 2.3)
You can take a photo in Night shot
mode. This mode allows you to take
photos in dim light.
Taking a night shot
1. From the Camera menu screen,
select
Night shot
.
2. When the camera turns on and an
image appears on the display,
position yourself at a right angle
to the subject and aim the camera
lens at the subject.
Notes
:
• Be careful not to cover the
camera lens with your hand.
• Tilt and rotate the phone until
the subject is in the centre of
the image.
• To change the colour tone of
photos, press
C
and select
Effects
.
3. Press
SEND
or
OK
to take a
photo. The photos are saved in the
Photos
folder.
Using photo options
After taking a night shot, press
OK
to
access the options.
p. 31
33 >> Camera
Go to photos
(Menu 2.4)
You can view photos you have
taken.
p. 39
Effects
(Menu 2.5)
You can change the colour tone of
photos the camera will take.
When you select the colour tone you
want, the image to be captured
appears on the display.
Settings
(Menu 2.6)
You can change the default camera
settings.
•
Size
: select an image size.
•
Picture quality
: select an image
quality setting.
•
Brightness
: adjust the image
brightness.
34
WAP browser
The WAP (Wireless Application
Protocol) browser on your phone
allows you to access the wireless
web. Using the web browser, you can
download and access up-to-date
information and a wide variety of
media content, such as wallpapers,
ringtones, and music files.
To access this menu, press
OK
in Idle
mode and select
WAP browser
.
Home
(Menu 3.1)
Use this menu to connect your phone
to the network and load the homepage
of the wireless web service provider.
Navigating the web
• To scroll though browser items,
move the wheel clockwise or
counterclockwise.
• To select a browser item, press
OK
and select
Select
.
• To return to the previous page,
press
C
.
Using web page options
From any web page, press
OK
to
access the following options:
•
Go to link
: access the linked web
page.
•
Select
: select the browser item.
•
Home
: go back to the homepage.
•
Bookmarks
: display the
Bookmarks list.
•
Reload
: reload the current page.
•
Go to URL
: enter a URL address
manually.
•
Show URL
: display the URL
address of the current web page.
You can also set the current page
as the homepage for the web
browser or a bookmark.
•
Clear cache
: clear the cache
memory.
•
Inbox
: access push messages in
the web browser.
•
Show images
: display images on
the current page.
•
Certificate
: display the web
browser certificate. You can also
delete the certificate.
Exiting the web browser
Press
END
to exit the browser.
35 >> WAP browser
Bookmarks
(Menu 3.2)
Use this menu to save URL addresses
in order to quickly access websites.
Adding a bookmark
1. Select
New
.
2. Select
Enter name
.
3. Enter a name for the bookmark
and press
OK
.
4. Select
Enter URL
.
5. Enter a URL address and press
OK
.
6. Select
Save
.
Accessing a bookmarked page
Scroll to a bookmark item and press
OK
and select
Go to URL
.
Using bookmark options
After saving an item, press
OK
to
access the following options:
•
Go to URL
: access the
bookmarked website.
•
Edit
: edit the address and name of
the bookmark.
•
Delete
: delete the selected
bookmark.
•
Delete all
: delete all bookmarks.
Enter URL
(Menu 3.3)
Use this menu to manually enter the
URL address of a website and access
the website.
WAP profile
(Menu 3.4)
Use this menu to select a connection
profile for accessing the wireless
web. You can also e
dit a profile.
p.
55
Clear cache
(Menu 3.5)
Use this menu to clear the cache, a
temporary memory that stores
recently accessed web pages.
36
Organiser
The Organiser feature enables you to
keep track of your schedule and tasks,
to view missed events, and to make a
memo.
To access this menu, press
OK
in Idle
mode and select
Organiser
.
Month view
(Menu 4.1)
Use this menu to keep track of your
monthly schedule. When you select
Month view
, the calendar displays
with today’s date highlighted.
Selecting a day
Move the wheel clockwise or
counterclockwise to move by day.
Entering a new appointment
1. Select a date on the calendar.
2. Press
OK
and select
Appointments
.
Note
: If there are any
appointments already stored for
the date, press
OK
and select
Create
→
Appointments
.
3. Enter information or change the
settings.
•
Subject
: enter the title of the
event.
•
Details
: enter information
about the event.
•
Start date
and
Start time
:
enter the starting date and time.
•
End date
and
End time
: enter
the ending date and time.
•
Location
: enter information
about the event location.
•
Alarm
: select how long before
the event the alarm is to alert
you. If you do not want an
alarm for the event, select
Off
.
•
Expiry
: select the expiry date.
4. Select
Save
to save the event.
Entering a new anniversary
1. Select a date on the calendar.
2. Press
OK
and select
Anniversary
.
Note
: If there are any
anniversaries already stored for
the date, press
OK
and select
Create
→
Anniversary
.
3. Enter information or change the
settings.
•
Occasion
: enter information
about the event.
•
Date
: enter the date.
•
Alarm
: select how long before
the event the alarm is to alert
you. If you do not want an
alarm for the event, select
Off
.
Note
: If you set an alarm for
the anniversary, the alarm rings
at 8 am.
•
Repeat every year
: set the
phone to remind you of the
event every year.
4. Select
Save
to save the event.
37 >> Organiser
Entering a memo
1. Select a date on the calendar.
2. Press
OK
and select
Memo
.
Note
: If there are any memos
already stored for the date, press
OK
and select
Create
→
Memo
.
3. Enter information.
•
Memo
: enter a memo.
•
Date
: enter the date.
4. Select
Save
to save the event.
Entering a task
1. Select a date on the calendar.
2. Press
OK
and select
To do
.
Note
: If there are any tasks
already stored for the date, press
OK
and select
Create
→
To do
.
3. Enter information or change the
settings.
•
To do
: enter information about
the event.
•
Date
: enter the date.
•
Due date
: enter the ending
date.
•
Select priority
: select a
priority level.
4. Select
Save
to save the event.
Accessing an event
1. Select a date on the calendar to
display the events for that day.
The following icons indicate the
type of events.
2. Scroll to an event and press
OK
and select
View
.
3. Move the wheel clockwise or
counterclockwise to view the
whole event information.
Using event options
While viewing an event, press
OK
to
access the following options:
•
Edit
: edit the event.
•
Send
: send the event via SMS,
MMS, e-mail, or Bluetooth.
•
Delete
: delete the event.
•
Month view
: switch to the month
view screen.
•
Week view
: switch to the week
view screen.
•
Day view
: switch to the day view
screen.
• Appointments
• Anniversaries
• Memos
• Tasks
38
Week view
(Menu 4.2)
Use this menu to view events for the
selected week. The highlighted cells
on the timetable indicate
appointments scheduled for the week.
Select the cell that contains the event
you want.
Day view
(Menu 4.3)
Use this menu to view events
scheduled for the current date. Select
the event you want.
Appointments
(Menu 4.4)
This menu displays appointments you
have created on the calendar. If you
have set the Alarm option, the
icon is activated.
Anniversary
(Menu 4.5)
Use this menu to view anniversaries
you have created on the calendar. If
you have set the Repeat and Alarm
options, the and icons are
activated.
To do
(Menu 4.6)
Use this menu to view tasks you have
created on the calendar.
The colour of the icon indicates the
task priority:
• Red for high priority
• Blue for normal
A check mark appears in the status
check box if the task has been
completed ( ). To change the task
status, on the task list, press
OK
and
select
Done
or
Undone
.
Memo
(Menu 4.7)
Use this menu to view memos you
have stored on the calendar.
Delete all
(Menu 4.8)
Use this menu to delete all events
stored on the calendar at one time.
Missed events
(Menu 4.9)
When you are unable to acknowledge
an alarm for an appointment and
anniversary, the phone stores the
missed event alarm until you confirm
and delete it.
Memory status
(Menu 4.0)
This menu displays the maximum
number of events you can store on the
calendar and the number of events
you have created.
39 >> Library
Library
The
Library
menu allows you to
access images, sounds, and other files
in the phone’s memory.
To access this menu, press
OK
and
select
Library
.
Images
(Menu 5.1)
This menu displays photos you have
taken and images you have
downloaded or received in messages.
Viewing an image
1. Select an image folder.
2. Scroll to the image you want.
3. Press
OK
and select
View
.
4. Move the wheel clockwise or
counterclockwise to view other
images.
Viewing a slide show
You can view your photos as a slide
show, a sequential presentation of
each photo in the current folder.
1. Select an image folder.
2. Press
OK
and select
Slide show
.
The slide show begins.
3. Press
C
to stop the slide show.
Using image options
While viewing an image, press
OK
to
access the following options:
•
List
: display the file list.
•
Send
: send the file via MMS,
e-mail, or Bluetooth.
•
Caller ID
: set the file as a caller
ID image for a Phonebook entry.
•
Delete
: delete the file.
•
Rename
: change the name of the
file.
•
Move to Favourite images
/
Move
to Downloaded images
/
Move to
Photos
: move the file to another
folder.
•
Lock
/
Unlock
: lock the file to
protect it from being deleted, or
unlock the file.
•
Details
: view the file properties.
Sounds
(Menu 5.2)
This menu displays voice memos you
have recorded and sounds you have
downloaded or received in messages.
Playing a sound
1. Select a sound folder.
2. Scroll to the sound you want.
3. Press
OK
and select
Play
.
If you are playing a voice memo you
have recorded, see
Voice memo
.
p. 45
40
Using sound options
While playing a sound, press
OK
to
access the following options:
•
List
: display the file list.
•
Send
: send the file via MMS,
e-mail, or Bluetooth.
•
Delete
: delete the selected file.
•
Rename
: change the name of the
file.
•
Move to Favourite sounds
/
Move
to Downloaded sounds
/
Move to
Voice list
: move the file to another
folder.
•
Lock
/
Unlock
: lock the file to
protect it from being deleted, or
unlock the file.
•
Details
: view the file properties.
Other files
(Menu 5.3)
This menu displays other files which
are not supported by the phone. You
cannot open these files on the phone.
Press
OK
to access the following
options:
•
Send as email
: send the file via
e-mail.
•
Delete
: delete the selected file.
•
Delete all
: delete all files.
•
Details
: view the file properties.
Memory status
(Menu 5.4)
You can check the total amount of
memory for media items and the
amount of memory currently in use in
each media box.
41 >> Phonebook
Phonebook
You can store phone numbers in your
phone’s memory and copy them to
the SIM card. The SIM card and
phone’s memory are physically
separate, but they are used as a single
entity called Phonebook.
To access this menu, press
OK
in Idle
mode and select
Phonebook
.
Contacts list
(Menu 6.1)
Use this menu to search for contacts
in Phonebook.
Finding an entry
1. Select the first character of the
name you want to find and scroll
to the name.
2. To dial, press
SEND
.
If the name has more than one
number, scroll to the number you
want and press
SEND
.
3. To view the contact information,
press
OK
and select
view
.
Using Phonebook options
While viewing a contact in
Phonebook, press
OK
to access the
following options:
Note
: Depending the number type
you select, options may vary.
•
Call
: dial the number.
•
Send message
: send an SMS or
MMS to the selected number.
•
Send email
: send an e-mail to the
selected e-mail address.
•
Send number
: send the number
via SMS, MMS, or
e-mail.
•
Send address
: send the e-mail
address via SMS, MMS, or
e-mail.
•
Send business card
: send the
contact via SMS, MMS, e-mail, or
Bluetooth.
•
Edit
: edit the contact information.
•
Add item
: add additional
numbers.
•
Delete number
: delete the
selected number when there is
more than one number.
•
Delete address
: delete the
selected e-mail address.
•
Delete contact
: delete the selected
contact from the Phonebook.
Add new contact
(Menu 6.2)
Use this menu to add new contacts to
Phonebook.
1. Change the settings or enter
information about the contact.
• : assign a name.
• : enter a mobile phone
number.
• : enter a home phone
number.
• : enter an office phone
number.
42
• : assign an e-mail address.
• : assign an image as a caller
ID image to alert you to a call
from the person.
• : assign the contact to a
caller group.
2. Select
Save
to save the contact.
Group
(Menu 6.3)
Use this menu to organise your
contacts in caller groups.
Creating a new caller group
Enter a name for the group and press
OK
.
Adding members to a caller group
1. Select a group.
2. Select
View members
→
Add
members
.
The Phonebook list screen is
displayed.
3. Select the contact you want to add
to the group.
4. To add more members, select
Add
members
→
a contact.
Managing caller groups
From the group list, press
OK
to
access the following options:
•
View members
: display the
members of the selected group.
•
Change group name
: change the
name of the group.
•
Delete
: delete the selected group.
Group members, however, will
not be deleted from Phonebook.
•
Delete all
: delete all groups.
Speed dial
(Menu 6.4)
Use this menu to assign speed dial
numbers (2 to 9) for eight of your
most frequently called numbers.
Assigning speed dial entries
1. Select a key number from
2
to
9
.
Key
1
is reserved for your
voicemail server.
2. Select the contact you want from
the contact list.
3. Scroll to the number you want and
press
OK
.
Managing speed dial entries
While viewing the Speed dial screen,
scroll to an entry and press
OK
to
access the following options:
•
Change
: assign a different
number to an assigned key.
•
Remove
: clear speed dial setting.
Dialling speed dial entries
Press and hold the appropriate key in
Idle mode.
43 >> Phonebook
My business card
(Menu 6.5)
Use this menu to create a name card
and send it to other people.
Saving your name card
The procedure for creating your name
card is the same as the one for saving
a number in the phone’s
memory.
p. 41
Using name card options
After saving your name card, press
OK
to access the following options:
•
Send number
: send the name
card as a data format attachment
via SMS, MMS, or
e-mail.
•
Send business card
: send the
name card via Bluetooth.
•
Edit
: edit the name card.
•
Remove
: delete the name card.
Own number
(Menu 6.6)
Use this feature to check your phone
numbers, or to assign a name to each
of the numbers. Changes made here
do not affect the actual subscriber
numbers on your SIM card.
Settings
(Menu 6.7)
Use this menu to change the method
for searching contacts in Phonebook.
Copy to SIM
(Menu 6.8)
Use this menu to copy the selected
contact in the phone’s memory to the
SIM card.
Delete all
(Menu 6.9)
Use this menu to delete all of the
contacts both in your phone’s
memory and on your SIM card.
Memory status
(Menu 6.0)
Use this menu to display the number
of contacts you have stored in
Phonebook.
Service Numbers
(Menu 6. )
Use this menu to view the list of
Service Dialling Numbers (SDNs)
assigned by your service provider,
including emergency numbers,
directory enquiries, and voicemail
numbers. This menu is available if
your SIM card supports SDN.
Scroll to the number you want and
press
SEND
.
44
Call log
Use this menu to view the calls you
have dialled, received, or missed, the
length of your calls, and the cost of
your calls, if supported by your SIM
card.
To access this menu, press
OK
in Idle
mode and select
Call log
.
Recent calls
(Menu 7.1)
This menu displays the most recent
calls dialled, received, or missed.
Accessing a call log
1. Move the wheel clockwise or
counterclockwise to scroll through
the call log list.
2. Scroll to the call log you want and
press
SEND
to dial a number, or
press
OK
and select
Details
to
view the details of a call.
Using call log options
While viewing the call details, press
OK
to access the following options:
•
Details
: view the call details.
•
Use number
: edit and save the
number.
•
Save to Phonebook
: save the
number in Phonebook.
•
Send message
: send an SMS or
MMS message to the selected
number.
Missed calls
(Menu 7.2)
This menu displays the most recently
received calls that you did not
answer.
Dialled calls
(Menu 7.3)
This menu displays the most recent
calls you have dialled.
Received calls
(Menu 7.4)
This menu displays the most recent
calls you have received.
Delete all
(Menu 7.5)
Use this menu to delete all of the call
logs in each call type.
Call time
(Menu 7.6)
This menu displays the time log for
calls made and received. The actual
time invoiced by your service
provider will vary.
•
Last
call
time
: check the length of
your last call.
•
Total
sent
: check the total length
of all the calls you have dialled.
•
Total
received
: check the total
length of all the you have calls
received.
To reset call time:
1. Press
OK
and select
Reset
.
2. Enter the phone password and
press
OK
.
Note
: T
he password is preset to
00000000
. You can change this
password.
p. 55
45
Applications
Use this menu to record a voice memo,
to set alarms, or to use the phone as a
world clock, calculator, and converter.
You can also synchronise the
Phonebook or calendar date in the
phone’s memory with data stored on a
PC.
To access this menu, press
OK
in Idle
mode and select
Applications
.
Voice memo
(Menu 8.1)
Use this menu to record voice memos.
A voice memo can be up to one hour
long.
Recording and saving a voice memo
1. Press
SEND
, or press
OK
and select
Record
to start recording.
2. Speak into the microphone.
• To adjust the volume, move the
wheel clockwise or
counterclockwise.
• To pause recording, press
Send
or
OK
. To resume recording, select
Continue record
from the option
list.
3. When you have finished, press
OK
and select
Stop
. The voice memo is
automatically saved.
Using voice memo options
After recording, press
OK
to access the
following options:
•
Play
: play the voice memo.
•
Send
: send the voice memo via
MMS, e-mail, or Bluetooth.
•
Record another
: return to Record
mode for a new voice memo.
•
Go to voice memos
: access voice
memos you have recorded.
•
Delete
: delete the voice memo.
•
Rename
: change the name of the
voice memo.
•
Lock
/
Unlock
: lock the voice memo
to protect it from being deleted.
•
Setting
: select a recording time.
•
Details
: view the voice memo
properties.
Playing a voice memo
1. From the Voice memo screen, press
OK
and select
Go to voice memos
.
2. Select a voice memo and select
Play
.
The voice memo plays.
During playback,
• To adjust the volume, move the
wheel clockwise or
counterclockwise.
• To pause playback, press
SEND
. To
resume playback, press
SEND
again.
• To stop playback, press
OK
and
select
Stop
.
46
Changing voice memo settings
You can select a recording time
before starting recording.
From the Voice memo screen, press
OK
and select
Setting
.
•
Limit for message
: record a voice
memo for adding to an MMS.
•
Limit for Email
: record a voice
memo for adding an e-mail.
•
Max 1 hour
: record a voice memo
up to one hour long.
World clock
(Menu 8.2)
Use this menu to find out what time it
is in another part of the world.
From the world map, move the wheel
clockwise or counterclockwise to
select the city you want. As the time
line moves, the current time and date
of the given zone display.
Alarm
(Menu 8.3)
Use this menu to set alarms to ring at
a specific time. A wake-up alarm is
not affected by your sound settings.
Setting an alarm
1. Select the type of alarm.
2. Specify the alarm settings.
•
Alarm
: activate the alarm.
•
Set time
: enter the time for the
alarm to sound using the wheel.
•
Repeat
: select a repeat option.
•
Alarm tone
: select an alarm
tone.
3. Select
Save
to save the alarm
settings.
Stopping an alarm
When the alarm sounds, choose either
of the following options to stop the
alarm:
• Select
Confirm
.
• Select
Snooze
or any key to pause
the alarm for 5 minutes. You can
do this a maximum of 5 times.
Calculator
(Menu 8.4)
Use this menu to perform basic
arithmetic functions such as addition,
subtraction, multiplication, and
division.
1. Enter the first number.
To insert a decimal point, scroll to
the decimal point mark (
.
) using
the wheel and press
OK
.
2. Move the wheel clockwise or
counterclockwise to access the
math function you want and press
OK
.
3. Enter the second number.
4. Scroll to the equal sign (
=
) using
the wheel and press
OK
to view
the result.
5. If necessary, repeat from step 2 to
continue the calculation.
47 >> Applications
Currency converter
(Menu 8.5)
Use this menu to convert currency
values.
1. Select
Unit
in the upper line and
select the original unit.
2. Move down and select the input
field.
3. Enter the value to be converted
and press
OK
.
Press to insert a decimal point.
4. Select
Unit
in the lower line and
select the unit you want to convert
to.
The equivalent value for the
amount you entered displays.
Note
:
You can edit the currency rate by
selecting
Set currency rate
.
PIM sync
(Menu 8.6)
Use this menu to synchronise
personal data in the phone’s memory
with data on a PC by using the
optional Widesync programme.
Creating a synchronisation profile
1. Select
New
.
2. Specify the following properties
of the profile:
•
Profile name
: enter a name for
the profile.
•
Sync category
: select the
applications you want to
synchronise.
•
Sync type
: select a
synchronisation type.
3. Select
Save
to save the profile.
Note
: You can add up to five profiles.
Starting synchronisation
1. Make sure that your PC has the
Widesync programme and MS
Outlook installed.
2. Run MS Outlook.
3. Select the profile you want on
your phone.
4. Press
OK
and select
Start sync
.
Using synchronisation options
From the synchronisation profile list,
press
OK
to access the following
options:
•
Start sync
: start synchronisation
for the selected profile.
•
View result
: view the result of the
last synchronisation.
•
New sync profile
: add a new
synchronisation profile.
•
Edit sync profile
: edit the
properties of the selected profile.
•
Delete
: delete the selected profile.
•
Delete all
: delete all profiles.
48
Settings
Use this menu to customise your
phone settings. You can also reset the
settings to their default values.
To access this menu, press
OK
in Idle
mode and select
Settings
.
Time & Date
(Menu 9.1)
Use this menu to change the time and
date settings for your phone.
•
Set time
: enter the current time
using the wheel.
•
Set date
: enter the current date
using the wheel.
•
Time zone set
: select your time
zone. Move the wheel clockwise
or counterclockwise to scroll to
your time zone and press
OK
to
save the time zone.
•
Time format
: select 12-hour or
24-hour time format.
Phone settings
(Menu 9.2)
Many different features of your
phone’s system can be customised to
suit your preferences.
Language
(Menu 9.2.1)
Use this menu to select one of several
languages for the display text.
Table mode
(Menu 9.2.2)
Use this menu to rotate the display
orientation 180 degrees.
Auto folder
(Menu 9.2.3)
Use this menu to open or close the
phone semi-automatically.
Auto Redial
(Menu 9.2.4)
Use this menu to set the phone to
make up to ten attempts to redial a
phone number after an unsuccessful
call.
Active Folder
(Menu 9.2.5)
Use this menu to answer an incoming
call by opening the phone.
Anykey Answer
(Menu 9.2.6)
Use this menu to answer an incoming
call by pressing any key, except
END
and
OK
.
When this option is set to
Off
, you
must press
SEND
, or press
OK
and
select
Accept
to answer a call.
Display settings
(Menu 9.3)
Use this menu to change settings for
the display and light.
Idle display
(Menu 9.3.1)
Use this menu to select a display item
for the Idle screen.
Brightness
(Menu 9.3.2)
Use this menu to adjust the brightness
of the display for varying lighting
conditions.
49 >> Settings
Backlight
(Menu 9.3.3)
Use this menu to select the length of
time the backlight of the display stays
on.
Dim
(Menu 9.3.4)
Use this menu to select the length of
time the display is in Dimming mode
after the backlight turns off. After a
specified time has elapsed, the
display turns off.
Sound settings
(Menu 9.4)
Use this menu to customise sound
settings to suit your preferences.
•
Ringtone
: select a ringtone for the
call ringer.
•
Ring volume
: select a ringtone
volume.
•
Ringtone type
: specify how you
are to be informed of incoming
calls.
Mute
: the phone mutes the call
ringer.
Melody
: the phone rings using the
selected ringtone.
Vibration
: the phone vibrates but
not rings.
Vibration then melody
: the
phone vibrates three times and
then starts ringing.
•
Message tone
: select a ringtone
for incoming messages.
•
Message alert type
: specify how
you are to be informed of
incoming messages.
•
Alerts on call
: set the phone to
beep when you receive a new
message or when the time for an
alarm comes during a call.
•
Quiet mode
: set how the phone
acts to alert you to a specific event
in Quiet mode, instead of making
sounds.
Network services
(Menu 9.5)
Use this menu to access network
services. Please contact your service
provider to check their availability
and subscribe to them, if you wish.
Call diverting
(Menu 9.5.1)
This network service reroutes
incoming calls to a phone number
that you specify.
1. Select a call diverting option:
•
Divert always
: divert all calls.
•
Busy
: divert calls when you are
on another call.
•
No
reply
: divert calls when you
do not answer the phone.
•
Unreachable
: divert calls
when you are not in an area
covered by your service
provider or when your phone is
switched off.
•
Cancel
all
: cancel all call
diverting options.
2. Select the type of calls to be
diverted.
50
3. Select
Activate
. To deactivate call
diverting, select
Deactivate
.
4. Move to the
Divert to
line.
5. Enter the number to which calls
are to be diverted and press
OK
.
6. If you selected
No reply
, move to
the
Sec
line and select the length
of time the network delays before
diverting a call.
Call barring
(Menu 9.5.2)
This network service allows you to
restrict your calls.
1. Select a call barring option:
•
All
outgoing
: prohibit outgoing
calls.
•
International
: prohibit
international calls.
•
International
except
to
home
:
only allow calls to numbers
within the current country
when you are abroad, and to
your home country.
•
All
incoming
: prohibit
incoming calls.
•
Incoming
while
abroad
:
prohibit incoming calls when
you use the phone outside of
your home country.
•
Cancel
all
: cancel all call
barring settings, allowing to be
sent and received normally.
•
Change barring password
:
change the call barring
password obtained from your
service provider.
2. Select the type of calls to be
barred.
3. Select
Activate
. To deactivate call
barring, select
Deactivate
.
4. Enter the call barring password
supplied by your service provider
and press
OK
.
Call waiting
(Menu 9.5.3)
This network service informs you
when someone is trying to reach you
while you are on another call.
1. Select the type of calls to which
the call waiting option will apply.
2. Select
Activate
. To deactivate call
waiting, select
Deactivate
.
Network selection
(Menu 9.5.4)
This network service allows you to
either automatically or manually
select the network used when
roaming outside of your home area.
You can select a network other than
your home network only if there is a
valid roaming agreement between the
two.
51 >> Settings
Caller ID
(Menu 9.5.5)
This network service allows you to
prevent your phone number from
being displayed on the phone of the
person being called.
If you select
Default
, the phone will
use the default setting provided by the
network.
Note
: Some networks do not allow
the user to change this setting
.
Voice mail server
(Menu 9.5.6)
Use this menu to store the number of
the voicemail server and access your
voicemails.
Note
:
You must enter the voice server
number before you can access your
voicemails.
Your service provider
can
give the voicemail server number.
•
Connect to voice server
: connect
to the voicemail server to allow
you to listen to your messages.
You can also connect to the
voicemail server by pressing and
holding
1
in Idle mode.
•
Voice server number
: store or
change the voicemail server
number.
Closed user group
(Menu 9.5.7)
Use this menu to set incoming and
outgoing calls to be restricted to a
selected user group. For details about
how to create a closed user group,
contact your service provider.
•
Index list
: add, delete, or activate
CUG index numbers. Press
OK
to
access the numbers for setting up
an index list.
•
Outside access
: enable calls to
numbers other than those in the
Closed user group. This feature
depends on the nature of your
CUG subscription.
•
Default group
: enable the CUG, if
you have set one with your service
provider. When making a call, you
are given the option of using your
default CUG, instead of selecting
one from the list.
Band selection
(Menu 9.5.8)
For the phone to make and receive
phone calls, it must register with an
available network. Your phone can
handle any of the following types of
networks: GSM 1900 and Combined
GSM 900/1800.
The country where you purchased
your phone determines the default
band that it uses. When you travel
abroad, you must remember to
change to an appropriate band.
Bluetooth
(Menu 9.6)
Using the Bluetooth feature, you can
connect the phone wirelessly to other
Bluetooth devices and exchange data
with them, talk hands-free, or control
the phone remotely.
52
Bluetooth technology allows free
wireless connections between all
Bluetooth-compliant devices within a
range of 10 meters. Since the devices
communicate using radio waves, they
do not need to be in line of sight to
each other.
Notes
:
• If there are obstacles between the
devices, the operating distance
may be reduced.
• It is recommended that you do not
use the Bluetooth feature while
using multimedia features such as
voice recorder and camera, or vice
versa.
• Some devices may not be
compatible with your phone.
Setting up the Bluetooth feature
The
Bluetooth
menu provides the
following options:
•
Activation
: activate or deactivate
the Bluetooth feature.
•
My devices
: search for
connectable Bluetooth devices.
•
My phone’s visibility
: allow
other Bluetooth devices to search
for your phone.
•
My phone’s name
: assign a
Bluetooth device name to your
phone, which is then displayed on
other devices.
•
Secure mode
: determine if the
phone asks for your confirmation
when other devices access your
data.
•
Bluetooth services
: display
available Bluetooth services.
Searching for and pairing with a
Bluetooth device
1. From the Bluetooth setting
options, select
My devices
.
2. Select
Search new device
.
After searching, a list of devices to
which you can connect displays.
The following icons indicate the
type of device:
The colour of the icon indicates
the status of the device:
• Grey for unpaired devices
• Blue for paired devices
• Red for devices that are
currently connected to your
phone
3. Select a device.
• Mobile phone
• Computer
• Headset or
hands-free car kit
• PDA
• Printer
• Unknown device
53 >> Settings
4. Enter a Bluetooth PIN code and
press
OK
.
This code is used just
once and you don’t need to
memorise it.
When the owner of the other
device enters the same code,
pairing is complete.
Note
:
Some devices, especially
headsets or hands-free car kits, may
have a fixed Bluetooth PIN code,
such as
0000
. If the other device has
a code, you must enter it.
Using device options
From the paired device list, scroll to a
device you want and press
OK
to
access the following options:
Note
:
Options may vary depending on
the paired device.
•
Connect
: connect to the currently
selected device.
•
Disconnect
: end the connection
with the device.
•
Browse files
: search for data from
the device and import data directly
to your phone.
•
Service list
: display the Bluetooth
service list for the selected device.
•
Rename
: change the name of the
device.
•
Authorise device
/
Unauthorised
device
: determine whether or not
the phone asks you to permit
connection when other devices try
to connect to your phone.
•
Delete
: remove the device from
the device list.
•
Delete all
: remove all devices
from the device list.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select an application,
Phonebook
,
Library
, or
Organiser
, in which
the item you want to send is
stored.
3. Scroll to the item you want.
4. Press
OK
and select
Send
or
Send
business card
→
Via Bluetooth
.
The phone searches for devices
within range and displays a list of
available devices.
5. Select a device.
6. If necessary, enter the Bluetooth
PIN code needed for pairing and
press
OK
.
54
Receiving data via Bluetooth
1. Activate the Bluetooth feature.
2. Set other Bluetooth devices to
search for your phone in the
My
phone’s visibility
option.
3. If an unauthorised Bluetooth
device sends data to your phone,
press
OK
to receive data.
Security
(Menu 9.7)
Use this menu to protect the phone
against unauthorised use by
managing the several access codes of
your phone and SIM card.
Note
:
If you enter an incorrect PIN /
PIN2 three times in succession, the SIM
card is blocked. To unblock it you need
to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are
supplied by your network operator.
PIN check
(Menu 9.7.1)
The 4- to 8-digit PIN (Personal
Identification Number) protects your
SIM card against unauthorised use.
When this feature is enabled, the
phone requires your PIN code each
time it is switched on.
Change PIN
(Menu 9.7.2)
Use this menu to change your PIN
code. The PIN Check feature must be
enabled to use this feature.
Phone lock
(Menu 9.7.3)
This feature locks the phone from
unauthorised use.
When this feature is enabled, you
must enter a 4- to 8-digit phone
password each time the phone is
switched on.
The password is preset to
00000000
.
To change the password, use the
Change password
menu.
Change password
(Menu 9.7.4)
Use this menu to change your phone
password.
Privacy
(Menu 9.7.5)
Use this menu to lock all menu
functions on the phone, except call
functions.
When this feature is enabled, you
must enter the phone password to
access menu functions.
SIM lock
(Menu 9.7.6)
The SIM lock feature allows your
phone to work only with the current
SIM by assigning a SIM lock code.
You must enter the SIM lock code to
use a different SIM card.
Change PIN2
(Menu 9.7.7)
If supported by your SIM card, use
this menu to change your current
PIN2.
55 >> Settings
Connection settings
(Menu 9.8)
Use this menu to create and
customise the profiles containing the
settings for connecting your phone to
the network. You need these settings
to use the web browser or send MMS
messages or e-mails.
Note
:
Your phone is suited for
connecting to the network by default. If
you change the settings without first
checking with your service provider,
the web browser, MMS, and e-mail
features may not work properly.
Creating a profile
1. Press
OK
.
Note
: If a profile has already been
saved, press
OK
and select
New
connection
.
2. Specify following information:
•
Profile name
: enter a name for
the profile.
•
Home URL
: enter the address
of the homepage of your
service provider.
•
Proxy
: activate or deactivate
the proxy server. When this
option is activated, the
IP
address
and
Port
options are
activated.
•
DNS
: activate or deactivate the
DNS address. When this option
is selected,
DNS1
and
DNS2
are activated.
•
Bearer
: select the network
bearer type.
•
Advanced settings
: change the
advanced options.
When the bearer is set to
GPRS
:
APN
: enter the access point
name.
Login ID
: enter the login ID.
Password
: enter the login
password.
When the bearer is set to
GSM
:
Dial number
: enter the PPP
phone number.
Login ID
: enter the login ID.
Password
: enter the login
password.
Data call type
: select a call
type for data transmission.
3. Select
Save
to save the profile.
Using profile options
Press
OK
to access the following
options:
•
Edit
: edit the profile.
•
Delete
: delete the selected profile.
•
New connection
: add a new
profile.
56
Docking station
(Menu 9.9)
When your phone is connected to the
docking station, you can use your
phone as a DECT phone, which will
be operated via the associated base
station (house or office phone).
Note
: For further information, see the
User’s Guide for the Docking station.
Reset settings
(Menu 9.0)
Use this menu to reset all the settings
in your phone at the same time.
Enter the phone password and press
OK
.
Note
:
The password is preset to
00000000
. You can change this
password.
p. 54
57
SIM services
This menu is available if you use a SIM
AT card that provides additional
services, such as news, weather, sports,
entertainment, and location services.
Available services may vary, depending
on your service provider’s plans.
For details, see your SIM card
instructions or contact your service
provider.
58
Solve problems
To save the time and expense of an
unnecessary service call, perform the
simple checks in this section before
contacting a service professional.
When you switch on your phone,
the following messages may
appear:
“Please insert SIM card”
• Be sure that the SIM card is
correctly installed.
“Phone lock”
• The automatic locking function
has been enabled. You must enter
the phone’s password before you
can use the phone.
“Enter PIN”
• You are using your phone for the
first time. You must enter the PIN
supplied with the SIM card.
• The PIN Check feature is enabled.
Every time the phone is switched
on, the PIN has to be entered. To
disable this feature, use the
PIN
check
menu.
“Enter PUK”
• The PIN was entered incorrectly
three times in succession, and the
SIM card is now blocked. Enter
the PUK supplied by your service
provider.
“No service,” “Network failure,” or
“Not done” displays
• The network connection has been
lost. You may be in a weak signal
area. Move and try again.
• You are trying to access an option
for which you have no
subscription with your service
provider. Contact the service
provider for further details.
You have entered a number but it
was not dialled
• Be sure that you have pressed
SEND
.
• Be sure that you have accessed the
right cellular network.
• Make sure that you have not set an
outgoing call barring option.
Your correspondent cannot reach
you
• Be sure that your phone is
switched on. (
END
pressed for
more than one second.)
• Be sure that you are accessing the
correct cellular network.
• Be sure that you have not set an
incoming call barring option.
Your correspondent cannot hear
you speaking
• Be sure that you have switched on
the microphone.
• Be sure that you are holding the
phone close enough to your
mouth. The microphone is located
at the bottom of the phone.
59 >> Solve problems
The phone starts beeping and
“Battery low” flashes on the
display
• Your battery is insufficiently
charged. Recharge the battery.
The audio quality of the call is poor
• Check the signal strength
indicator on the display ( ).
The number of bars indicates the
signal strength from strong ( )
to weak ( ).
• Try moving the phone slightly or
moving closer to a window if you
are in a building.
No number is dialled when you re-
call a Phonebook entry
• Use the Phonebook feature to
ensure the number has been stored
correctly.
• Re-store the number, if necessary.
The battery doesn't charge
properly or the phone sometimes
turns itself off
• Wipe the charging contacts both
on the phone and on the battery
with a clean soft cloth.
If the above guidelines do not help
you to solve the problem, take note
of:
• The model and serial numbers of
your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or
Samsung after-sales service.
60
Health and safety information
Exposure to Radio
Frequency (RF) Signals
Certification Information
(SAR)
Your wireless phone is a radio
transmitter and receiver. It is
designed and manufactured not
to exceed the exposure limits
for radio frequency (RF) energy
set by the Federal
Communications Commission
(FCC) of the U.S. government.
These FCC exposure limits are
derived from the
recommendations of two expert
organizations, the National
Counsel on Radiation Protection
and Measurement (NCRP) and
the Institute of Electrical and
Electronics Engineers (IEEE). In
both cases, the
recommendations were
developed by scientific and
engineering experts drawn from
industry, government, and
academia after extensive
reviews of the scientific
literature related to the
biological effects of RF energy.
The exposure limit set by the
FCC for wireless mobile phones
employs a unit of measurement
known as the Specific
Absorption Rate (SAR). The
SAR is a measure of the rate of
absorption of RF energy by the
human body expressed in units
of watts per kilogram (W/kg).
The FCC requires wireless
phones to comply with a safety
limit of 1.6 watts per kilogram
(1.6 W/kg). The FCC exposure
limit incorporates a substantial
margin of safety to give
additional protection to the
public and to account for any
variations in measurements.
SAR tests are conducted using
standard operating positions
accepted by the FCC with the
phone transmitting at its
highest certified power level in
all tested frequency bands.
Although the SAR is determined
at the highest certified power
level, the actual SAR level of
the phone while operating can
be well below the maximum
value. This is because the
phone is designed to operate at
multiple power levels so as to
use only the power required to
reach the network. In general,
the closer you are to a wireless
base station antenna, the lower
the power output.
Before a new model phone is
available for sale to the public,
it must be tested and certified
61 >> Health and safety information
to the FCC that it does not
exceed the exposure limit
established by the FCC. Tests
for each model phone are
performed in positions and
locations (e.g. at the ear and
worn on the body) as required
by the FCC. Body-worn
operations are restricted to
Samsung-supplied, approved,
or non- Samsung designated
accessories that have no metal
and must provide at least 1.5
cm separation between the
device, including its antenna
(whether extended or
retracted) and the user's body.
Non-compliance with the above
restrictions may result in
violation of FCC RF exposure
guidelines.
The FCC has granted an
Equipment Authorization for
this mobile phone with all
reported SAR levels evaluated
as in compliance with the FCC
RF exposure guidelines. The
maximum SAR values for this
model phone as reported to the
FCC are:
1900
• Head: 0.331 W/Kg.
• Body-worn: 0.355 W/Kg.
SAR information on this and
other model phones can be
viewed on-line at www.fcc.gov/
oet/fccid. This site uses the
phone FCC ID number A3LSGHE910.
Sometimes it may be
necessary to remove the
battery pack to find the
number. Once you have the FCC
ID number for a particular
phone, follow the instructions
on the website and it should
provide values for typical or
maximum SAR for a particular
phone. Additional product
specific SAR information can
also be obtained at
www.fcc.gov/cgb/sar.
62
Consumer Information
on Wireless Phones
The U.S. Food and Drug
Administration (FDA) has
published a series of Questions
and Answers for consumers
relating to radio frequency (RF)
exposure from wireless phones.
The FDA publication includes
the following information:
What kinds of phones are
the subject of this update?
The term wireless phone refers
here to hand-held wireless
phones with built-in antennas,
often called “cell,” “mobile,” or
“PCS” phones. These types of
wireless phones can expose the
user to measurable radio
frequency energy (RF) because
of the short distance between
the phone and the user's head.
These RF exposures are limited
by Federal Communications
Commission safety guidelines
that were developed with the
advice of FDA and other federal
health and safety agencies.
When the phone is located at
greater distances from the user,
the exposure to RF is drastically
lower because a person's RF
exposure decreases rapidly with
increasing distance from the
source. The so-called “cordless
phones,” which have a base unit
connected to the telephone
wiring in a house, typically
operate at far lower power
levels, and thus produce RF
exposures well within the FCC's
compliance limits.
Do wireless phones pose a
health hazard?
The available scientific evidence
does not show that any health
problems are associated with
using wireless phones. There is
no proof, however, that wireless
phones are absolutely safe.
Wireless phones emit low levels
of radio frequency energy (RF)
in the microwave range while
being used. They also emit very
low levels of RF when in the
stand-by mode. Whereas high
levels of RF can produce health
effects (by heating tissue),
exposure to low level RF that
does not produce heating
effects causes no known
adverse health effects. Many
studies of low level RF
exposures have not found any
biological effects. Some studies
have suggested that some
biological effects may occur, but
such findings have not been
confirmed by additional
research. In some cases, other
researchers have had difficulty
in reproducing those studies, or
in determining the reasons for
inconsistent results.
63 >> Health and safety information
What is FDA's role
concerning the safety of
wireless phones?
Under the law, FDA does not
review the safety of radiation-
emitting consumer products
such as wireless phones before
they can be sold, as it does with
new drugs or medical devices.
However, the agency has
authority to take action if
wireless phones are shown to
emit radio frequency energy
(RF) at a level that is hazardous
to the user. In such a case, FDA
could require the manufacturers
of wireless phones to notify
users of the health hazard and
to repair, replace or recall the
phones so that the hazard no
longer exists.
Although the existing scientific
data do not justify FDA
regulatory actions, FDA has
urged the wireless phone
industry to take a number of
steps, including the following:
• “Support needed research
into possible biological
effects of RF of the type
emitted by wireless phones;
• “Design wireless phones in a
way that minimizes any RF
exposure to the user that is
not necessary for device
function; and
• “Cooperate in providing
users of wireless phones
with the best possible
information on possible
effects of wireless phone
use on human health.
FDA belongs to an interagency
working group of the federal
agencies that have
responsibility for different
aspects of RF safety to ensure
coordinated efforts at the
federal level. The following
agencies belong to this working
group:
• “National Institute for
Occupational Safety and
Health
• “Environmental Protection
Agency
• “Federal Communications
Commission
• “Occupational Safety and
Health Administration
•“National
Telecommunications and
Information Administration
The National Institutes of
Health participates in some
interagency working group
activities, as well.
FDA shares regulatory
responsibilities for wireless
phones with the Federal
Communications Commission
(FCC). All phones that are sold
in the United States must
comply with FCC safety
guidelines that limit RF
exposure. FCC relies on FDA
and other health agencies for
64
safety questions about wireless
phones.
FCC also regulates the base
stations that the wireless phone
networks rely upon. While these
base stations operate at higher
power than do the wireless
phones themselves, the RF
exposures that people get from
these base stations are typically
thousands of times lower than
those they can get from
wireless phones. Base stations
are thus not the primary
subject of the safety questions
discussed in this document.
What are the results of the
research done already?
The research done thus far has
produced conflicting results,
and many studies have suffered
from flaws in their research
methods. Animal experiments
investigating the effects of radio
frequency energy (RF)
exposures characteristic of
wireless phones have yielded
conflicting results that often
cannot be repeated in other
laboratories. A few animal
studies, however, have
suggested that low levels of RF
could accelerate the
development of cancer in
laboratory animals. However,
many of the studies that
showed increased tumor
development used animals that
had been genetically
engineered or treated with
cancer-causing chemicals so as
to be pre-disposed to develop
cancer in absence of RF
exposure. Other studies
exposed the animals to RF for
up to 22 hours per day. These
conditions are not similar to the
conditions under which people
use wireless phones, so we
don't know with certainty what
the results of such studies
mean for human health.
Three large epidemiology
studies have been published
since December 2000. Between
them, the studies investigated
any possible association
between the use of wireless
phones and primary brain
cancer, glioma, meningioma, or
acoustic neuroma, tumors of
the brain or salivary gland,
leukemia, or other cancers.
None of the studies
demonstrated the existence of
any harmful health effects from
wireless phones RF exposures.
However, none of the studies
can answer questions about
long-term exposures, since the
average period of phone use in
these studies was around three
years.
What research is needed to
decide whether RF
exposure from wireless
phones poses a health risk?
A combination of laboratory
studies and epidemiological
studies of people actually using
65 >> Health and safety information
wireless phones would provide
some of the data that are
needed. Lifetime animal
exposure studies could be
completed in a few years.
However, very large numbers of
animals would be needed to
provide reliable proof of a
cancer promoting effect if one
exists. Epidemiological studies
can provide data that is directly
applicable to human
populations, but ten or more
years' follow-up may be needed
to provide answers about some
health effects, such as cancer.
This is because the interval
between the time of exposure
to a cancer-causing agent and
the time tumors develop - if
they do - may be many, many
years. The interpretation of
epidemiological studies is
hampered by difficulties in
measuring actual RF exposure
during day-to-day use of
wireless phones. Many factors
affect this measurement, such
as the angle at which the phone
is held, or which model of
phone is used.
What is FDA doing to find
out more about the
possible health effects of
wireless phone RF?
FDA is working with the U.S.
National Toxicology Program
and with groups of investigators
around the world to ensure that
high priority animal studies are
conducted to address important
questions about the effects of
exposure to radio frequency
energy (RF).
FDA has been a leading
participant in the World Health
Organization international
Electromagnetic Fields (EMF)
Project since its inception in
1996. An influential result of
this work has been the
development of a detailed
agenda of research needs that
has driven the establishment of
new research programs around
the world. The Project has also
helped develop a series of
public information documents
on EMF issues.
FDA and Cellular
Telecommunications & Internet
Association (CTIA) have a
formal Cooperative Research
and Development Agreement
(CRADA) to do research on
wireless phone safety. FDA
provides the scientific
oversight, obtaining input from
experts in government,
industry, and academic
organizations. CTIA-funded
research is conducted through
contracts to independent
investigators. The initial
research will include both
laboratory studies and studies
of wireless phone users. The
CRADA will also include a broad
assessment of additional
research needs in the context of
66
the latest research
developments around the
world.
What steps can I take to
reduce my exposure to
radio frequency energy
from my wireless phone?
If there is a risk from these
products - and at this point we
do not know that there is - it is
probably very small. But if you
are concerned about avoiding
even potential risks, you can
take a few simple steps to
minimize your exposure to radio
frequency energy (RF). Since
time is a key factor in how
much exposure a person
receives, reducing the amount
of time spent using a wireless
phone will reduce RF exposure.
• “If you must conduct
extended conversations by
wireless phone every day,
you could place more
distance between your body
and the source of the RF,
since the exposure level
drops off dramatically with
distance. For example, you
could use a headset and
carry the wireless phone
away from your body or use
a wireless phone connected
to a remote antenna.
Again, the scientific data do not
demonstrate that wireless
phones are harmful. But if you
are concerned about the RF
exposure from these products,
you can use measures like
those described above to
reduce your RF exposure from
wireless phone use.
What about children using
wireless phones?
The scientific evidence does not
show a danger to users of
wireless phones, including
children and teenagers. If you
want to take steps to lower
exposure to radio frequency
energy (RF), the measures
described above would apply to
children and teenagers using
wireless phones. Reducing the
time of wireless phone use and
increasing the distance between
the user and the RF source will
reduce RF exposure.
Some groups sponsored by
other national governments
have advised that children be
discouraged from using wireless
phones at all. For example, the
government in the United
Kingdom distributed leaflets
containing such a
recommendation in December
2000. They noted that no
evidence exists that using a
wireless phone causes brain
tumors or other ill effects. Their
recommendation to limit
wireless phone use by children
was strictly precautionary; it
was not based on scientific
evidence that any health hazard
exists.
67 >> Health and safety information
Do hands-free kits for
wireless phones reduce
risks from exposure to RF
emissions?
Since there are no known risks
from exposure to RF emissions
from wireless phones, there is
no reason to believe that
hands-free kits reduce risks.
Hands-free kits can be used
with wireless phones for
convenience and comfort.
These systems reduce the
absorption of RF energy in the
head because the phone, which
is the source of the RF
emissions, will not be placed
against the head. On the other
hand, if the phone is mounted
against the waist or other part
of the body during use, then
that part of the body will absorb
more RF energy. Wireless
phones marketed in the U.S.
are required to meet safety
requirements regardless of
whether they are used against
the head or against the body.
Either configuration should
result in compliance with the
safety limit.
Do wireless phone
accessories that claim to
shield the head from RF
radiation work?
Since there are no known risks
from exposure to RF emissions
from wireless phones, there is
no reason to believe that
accessories that claim to shield
the head from those emissions
reduce risks. Some products
that claim to shield the user
from RF absorption use special
phone cases, while others
involve nothing more than a
metallic accessory attached to
the phone. Studies have shown
that these products generally
do not work as advertised.
Unlike “hand-free” kits, these
so-called “shields” may
interfere with proper operation
of the phone. The phone may
be forced to boost its power to
compensate, leading to an
increase in RF absorption. In
February 2002, the Federal
trade Commission (FTC)
charged two companies that
sold devices that claimed to
protect wireless phone users
from radiation with making
false and unsubstantiated
claims. According to FTC, these
defendants lacked a reasonable
basis to substantiate their
claim.
What about wireless phone
interference with medical
equipment?
Radio frequency energy (RF)
from wireless phones can
interact with some electronic
devices. For this reason, FDA
helped develop a detailed test
method to measure
electromagnetic interference
(EMI) of implanted cardiac
pacemakers and defibrillators
68
from wireless telephones. This
test method is now part of a
standard sponsored by the
Association for the
Advancement of Medical
instrumentation (AAMI). The
final draft, a joint effort by FDA,
medical device manufacturers,
and many other groups, was
completed in late 2000. This
standard will allow
manufacturers to ensure that
cardiac pacemakers and
defibrillators are safe from
wireless phone EMI. FDA has
tested wireless phones and
helped develop a voluntary
standard sponsored by the
Institute of Electrical and
Electronic Engineers (IEEE).
This standard specifies test
methods and performance
requirements for hearing aids
and wireless phones so that no
interference occurs when a
person uses a compatible phone
and a compatible hearing aid at
the same time. This standard
was approved by the IEEE in
2000.
FDA continues to monitor the
use of wireless phones for
possible interactions with other
medical devices. Should
harmful interference be found
to occur, FDA will conduct
testing to assess the
interference and work to
resolve the problem.
Additional information on the
safety of RF exposures from
various sources can be obtained
from the following
organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/
rfsafety/
• Environmental Protection
Agency (EPA):
http://www.epa.gov/
radiation/
• Occupational Safety and
Health Administration's
(OSHA):
http://www.osha.gov/SLTC/
radiofrequencyradiation/
index.html
• National institute for
Occupational Safety and
Health (NIOSH):
http://www.cdc.gov/niosh/
emfpg.html
• World health Organization
(WHO):
http://www.who.int/peh-
emf/
• International Commission
on Non-Ionizing Radiation
Protection:
http://www.icnirp.de
• National Radiation
Protection Board (UK):
http://www.nrpb.org.uk
• Updated 4/3/2002: US food
and Drug Administration
http://www.fda.gov/
cellphones
69 >> Health and safety information
Road Safety
Your wireless phone gives you
the powerful ability to
communicate by voice, almost
anywhere, anytime. But an
important responsibility
accompanies the benefits of
wireless phones, one that every
user must uphold.
When driving a car, driving is
your first responsibility. When
using your wireless phone
behind the wheel of a car,
practice good common sense
and remember the following
tips:
1. Get to know your wireless
phone and its features, such
as speed dial and redial. If
available, these features
help you to place your call
without taking your
attention off the road.
2. When available, use a
hands-free device. If
possible, add an additional
layer of convenience and
safety to your wireless
phone with one of the many
hands free accessories
available today.
3. Position your wireless phone
within easy reach. Be able
to access your wireless
phone without removing
your eyes from the road. If
you get an incoming call at
an inconvenient time, let
your voice mail answer it for
you.
4. Let the person you are
speaking with know you are
driving; if necessary,
suspend the call in heavy
traffic or hazardous weather
conditions. Rain, sleet,
snow, ice and even heavy
traffic can be hazardous.
5. Do not take notes or look up
phone numbers while
driving. Jotting down a “to
do” list or flipping through
your address book takes
attention away from your
primary responsibility,
driving safely.
6. Dial sensibly and assess the
traffic; if possible, place
calls when you are not
moving or before pulling
into traffic. Try to plan calls
when your car will be
stationary. If you need to
make a call while moving,
dial only a few numbers,
check the road and your
mirrors, then continue.
70
7. Do not engage in stressful
or emotional conversations
that may be distracting.
Make people you are talking
with aware you are driving
and suspend conversations
that have the potential to
divert your attention from
the road.
8. Use your wireless phone to
call for help. Dial 9-1-1 or
other local emergency
number in the case of fire,
traffic accident or medical
emergencies. Remember, it
is a free call on your
wireless phone!
9. Use your wireless phone to
help others in emergencies.
If you see an auto accident,
crime in progress or other
serious emergency where
lives are in danger, call 9-1-
1 or other local emergency
number, as you would want
others to do for you.
10.Call roadside assistance or a
special non-emergency
wireless assistance number
when necessary. If you see
a broken-down vehicle
posing no serious hazard, a
broken traffic signal, a
minor traffic accident where
no one appears injured, or a
vehicle you know to be
stolen, call roadside
assistance or other special
non-emergency number.
“The wireless industry
reminds you to use your
phone safely when driving.”
For more information, please
call 1-888-901-SAFE, or visit
our web-site www.wow-
com.com
Provided by the Cellular
Telecommunications & Internet
Association
Operating Environment
Remember to follow any special
regulations in force in any area
and always switch your phone
off whenever it is forbidden to
use it, or when it may cause
interference or danger. When
connecting the phone or any
accessory to another device,
read its user's guide for detailed
safety instructions. Do not
connect incompatible products.
As with other mobile radio
transmitting equipment, users
are advised that for the
satisfactory operation of the
equipment and for the safety of
personnel, it is recommended
that the equipment should only
be used in the normal operating
position (held to your ear with
the antenna pointing over your
shoulder).
Using Your Phone Near
Other Electronic Devices
Most modern electronic
equipment is shielded from
71 >> Health and safety information
radio frequency (RF) signals.
However, certain electronic
equipment may not be shielded
against the RF signals from
your wireless phone. Consult
the manufacturer to discuss
alternatives.
Pacemakers
Pacemaker manufacturers
recommend that a minimum
distance of 15 cm (6 inches) be
maintained between a wireless
phone and a pacemaker to
avoid potential interference
with the pacemaker.
These recommendations are
consistent with the independent
research and recommendations
of Wireless Technology
Research.
Persons with pacemakers:
• should always keep the
phone more than 15 cm
(6 inches) from their
pacemaker when the phone
is switched on.
• should not carry the phone
in a breast pocket.
• should use the ear opposite
the pacemaker to minimize
potential interference.
If you have any reason to
suspect that interference is
taking place, switch your phone
off immediately.
Hearing Aids
Some digital wireless phones
may interfere with some
hearing aids. In the event of
such interference, you may
wish to consult your hearing aid
manufacturer to discuss
alternatives.
Other Medical Devices
If you use any other personal
medical devices, consult the
manufacturer of your device to
determine if it is adequately
shielded from external RF
energy. Your physician may be
able to assist you in obtaining
this information. Switch your
phone off in health care
facilities when any regulations
posted in these areas instruct
you to do so. Hospitals or
health care facilities may be
using equipment that could be
sensitive to external RF energy.
72
Vehicles
RF signals may affect
improperly installed or
inadequately shielded electronic
systems in motor vehicles.
Check with the manufacturer or
its representative regarding
your vehicle. You should also
consult the manufacturer of any
equipment that has been added
to your vehicle.
Posted Facilities
Switch your phone off in any
facility where posted notices
require you to do so.
Potentially Explosive
Environments
Switch your phone off when in
any area with a potentially
explosive atmosphere and obey
all signs and instructions.
Sparks in such areas could
cause an explosion or fire
resulting in bodily injury or
even death.
Users are advised to switch the
phone off while at a refueling
point (service station). Users
are reminded of the need to
observe restrictions on the use
of radio equipment in fuel
depots (fuel storage and
distribution areas), chemical
plants or where blasting
operations are in progress.
Areas with a potentially
explosive atmosphere are often
but not always clearly marked.
They include below deck on
boats, chemical transfer or
storage facilities, vehicles using
liquefied petroleum gas (such
as propane or butane), areas
where the air contains
chemicals or particles, such as
grain, dust or metal powders,
and any other area where you
would normally be advised to
turn off your vehicle engine.
Emergency Calls
This phone, like any wireless
phone, operates using radio
signals, wireless and landline
networks as well as user
programmed functions, which
cannot guarantee connection in
all conditions. Therefore, you
should never rely solely on any
wireless phone for essential
communications (medical
emergencies, for example).
Remember, to make or receive
any calls the phone must be
switched on and in a service
area with adequate signal
strength. Emergency calls may
not be possible on all wireless
phone networks or when certain
network services and/or phone
features are in use. Check with
local service providers.
To make an emergency call:
1. If the phone is not on,
switch it on.
2. Key in the emergency
number for your present
73 >> Health and safety information
location (for example, 911
or other official emergency
number). Emergency
numbers vary by location.
3. Press .
If certain features are in use
(call barring, for example), you
may first need to deactivate
those features before you can
make an emergency call.
Consult this document and your
local cellular service provider.
When making an emergency
call, remember to give all the
necessary information as
accurately as possible.
Remember that your phone
may be the only means of
communication at the scene of
an accident; do not cut off the
call until given permission to do
so.
Restricting Children's
access to your Phone
Your phone is not a toy.
Children should not be allowed
to play with it because they
could hurt themselves and
others, damage the phone or
make calls that increase your
phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or
radio interference if used in
close proximity to receiving
equipment. The FCC can require
you to stop using the phone if
such interference cannot be
eliminated.
This device complies with
Part 15 of the FCC Rules.
Operation is subject to the
following two conditions:
(1) this device may not
cause harmful interference,
and (2) this device must accept
any interference received,
including interference that may
cause undesired operation.
74
Vehicles using liquefied
petroleum gas (such as propane
or butane) must comply with
the National Fire Protection
Standard (NFPA-58). For a copy
of this standard, contact the
National Fire Protection
Association, One Battery march
Park, Quincy, MA 02269, Attn:
Publication Sales Division.
Cautions
Changes or modifications made in
the radio phone, not expressly
approved by Samsung, will void
the user’s authority to operate
the equipment.
Only use approved batteries,
antennas and chargers. The use
of any unauthorized accessories
may be dangerous and void the
phone warranty if said
accessories cause damage or a
defect to the phone.
Although your phone is quite
sturdy, it is a complex piece of
equipment and can be broken.
Avoid dropping, hitting, bending
or sitting on it.
Other Important Safety
Information
• Only qualified personnel
should service the phone or
install the phone in a
vehicle. Faulty installation or
service may be dangerous
and may invalidate any
warranty applicable to the
device.
• Check regularly that all
wireless phone equipment in
your vehicle is mounted and
operating properly.
• Do not store or carry
flammable liquids, gases or
explosive materials in the
same compartment as the
phone, its parts or
accessories.
• For vehicles equipped with
an air bag, remember that
an air bag inflates with
great force. Do not place
objects, including both
installed or portable wireless
equipment in the area over
the air bag or in the air bag
deployment area. If wireless
equipment is improperly
installed and the air bag
inflates, serious injury could
result.
• Switch your phone off
before boarding an aircraft.
The use of wireless phone in
aircraft is illegal and may be
dangerous to the aircraft's
operation.
75 >> Health and safety information
• Failure to observe these
instructions may lead to the
suspension or denial of
telephone services to the
offender, or legal action, or
both.
Product Performance
Getting the Most Out of
Your Signal Reception
The quality of each call you
make or receive depends on the
signal strength in your area.
Your phone informs you of the
current signal strength by
displaying a number of bars
next to the signal strength icon.
The more bars displayed, the
stronger the signal.
If you're inside a building, being
near a window may give you
better reception.
Understanding the Power
Save Feature
If your phone is unable to find a
signal after 15 minutes of
searching, a Power Save feature
is automatically activated. If
your phone is active, it
periodically rechecks service
availability or you can check it
yourself by pressing any key.
Anytime the Power Save feature
is activated, a message displays
on the screen. When a signal is
found, your phone returns to
standby mode.
76
Understanding How Your
Phone Operates
Your phone is basically a radio
transmitter and receiver. When
it's turned on, it receives and
transmits radio frequency (RF)
signals. When you use your
phone, the system handling
your call controls the power
level. This power can range
from 0.006 watts to 0.2 watts
in digital mode.
Maintaining Your Phone's
Peak Performance
For the best care of your phone,
only authorized personnel
should service your phone and
accessories. Faulty service may
void the warranty.
There are several simple
guidelines to operating your
phone properly and maintaining
safe, satisfactory service.
• Hold the phone with the
antenna raised, fully-
extended and over your
shoulder.
• Try not to hold, bend or
twist the phone's antenna.
• Don't use the phone if the
antenna is damaged.
• Speak directly into the
phone's receiver.
• Avoid exposing your phone
and accessories to rain or
liquid spills. If your phone
does get wet, immediately
turn the power off and
remove the battery. If it is
inoperable, call Customer
Care for service.
Availability of Various
Features/Ring Tones
Many services and features are
network dependent and may
require additional subscription
and/or usage charges. Not all
features are available for
purchase or use in all areas.
Downloadable Ring Tones may
be available at an additional
cost. Other conditions and
restrictions may apply. See your
service provider for additional
information.
Battery Standby and Talk
Time
Standby and talk times will vary
depending on phone usage
patterns and conditions. Battery
power consumption depends on
factors such as network
configuration, signal strength,
operating temperature, features
selected, frequency of calls, and
voice, data, and other
application usage patterns.
Battery Precautions
77 >> Health and safety information
• Never use any charger or
battery that is damaged in
any way.
• Use the battery only for its
intended purpose.
• If you use the phone near
the network's base station,
it uses less power; talk and
standby time are greatly
affected by the signal
strength on the cellular
network and the parameters
set by the network operator.
• Battery charging time
depends on the remaining
battery charge and the type
of battery and charger used.
The battery can be charged
and discharged hundreds of
times, but it will gradually
wear out. When the
operation time (talk time
and standby time) is
noticeably shorter than
normal, it is time to buy a
new battery.
• If left unused, a fully
charged battery will
discharge itself over time.
• Use only Samsung-
approved batteries and
recharge your battery only
with Samsung-approved
chargers. When a charger is
not in use, disconnect it
from the power source. Do
not leave the battery
connected to a charger for
more than a week, since
overcharging may shorten
its life.
• Extreme temperatures will
affect the charging capacity
of your battery: it may
require cooling or warming
first.
• Do not leave the battery in
hot or cold places, such as
in a car in summer or winter
conditions, as you will
reduce the capacity and
lifetime of the battery.
Always try to keep the
battery at room
temperature. A phone with
a hot or cold battery may
temporarily not work, even
when the battery is fully
charged. Li-ion batteries are
particularly affected by
temperatures below 0 °C
(32 °F).
• Do not short-circuit the
battery. Accidental short-
circuiting can occur when a
metallic object (coin, clip or
pen) causes a direct
connection between the +
and - terminals of the
battery (metal strips on the
battery), for example when
you carry a spare battery in
a pocket or bag. Short-
circuiting the terminals may
damage the battery or the
object causing the short-
circuiting.
• Dispose of used batteries in
accordance with local
78
regulations. In some areas,
the disposal of batteries in
household or business trash
may be prohibited. For safe
disposal options for Li-Ion
batteries, contact your
nearest Samsung
authorized service center.
Always recycle. Do not
dispose of batteries in a fire.
Care and Maintenance
Your phone is a product of
superior design and
craftsmanship and should be
treated with care. The
suggestions below will help you
fulfill any warranty obligations
and allow you to enjoy this
product for many years.
• Keep the phone and all its
parts and accessories out of
the reach of small children.
• Keep the phone dry.
Precipitation, humidity and
liquids contain minerals that
will corrode electronic
circuits.
• Do not use the phone with a
wet hand. Doing so may
cause an electric shock to
you or damage to the
phone.
• Do not use or store the
phone in dusty, dirty areas,
as its moving parts may be
damaged.
• Do not store the phone in
hot areas. High
temperatures can shorten
the life of electronic devices,
damage batteries, and warp
or melt certain plastics.
• Do not store the phone in
cold areas. When the phone
warms up to its normal
operating temperature,
moisture can form inside the
phone, which may damage
the phone's electronic circuit
boards.
• Do not drop, knock or shake
the phone. Rough handling
can break internal circuit
boards.
• Do not use harsh chemicals,
cleaning solvents or strong
detergents to clean the
phone. Wipe it with a soft
cloth slightly dampened in a
mild soap-and-water
solution.
• Do not paint the phone.
Paint can clog the device's
moving parts and prevent
proper operation.
• Do not put the phone in or
on heating devices, such as
a microwave oven, a stove
or a radiator. The phone
may explode when
overheated.
• When the phone or battery
gets wet, the label
indicating water damage
inside the phone changes
color. In this case, phone
repairs are no longer
79 >> Health and safety information
guaranteed by the
manufacturer's warranty,
even if the warranty for your
phone has not expired.
• If your phone has a flash or
light, do not use it too close
to the eyes of people or
animals. This may cause
damage to their eyes.
• Use only the supplied or an
approved replacement
antenna. Unauthorized
antennas or modified
accessories may damage
the phone and violate
regulations governing radio
devices.
• If the phone, battery,
charger or any accessory is
not working properly, take it
to your nearest qualified
service facility. The
personnel there will assist
you, and if necessary,
arrange for service.
•
80
81
Index
A
ABC mode, text input • 17
Alarm • 46
Answering
call • 18
second call • 19
Anykey answer • 48
Auto folder • 48
Auto redial • 48
B
Backlight time, set • 49
Band selection • 51
Barring, calls • 50
Battery
charging • 6
precautions • 61
removing • 6
Bluetooth
receiving, data • 54
sending, data • 53
settings • 52
Bookmarks 35
Broadcast messages • 24
C
Calculator • 46
Call records
dialled • 44
missed • 44
received • 44
Call time • 44
Caller group
creating • 42
managing • 42
Caller ID • 51
Calls answering • 18
barring • 50
diverting • 49
holding • 19
redialling • 18
rejecting • 18
transferring • 20
waiting • 50
Camera • 31
CB (Cell Broadcast) messages • 24
CB messages
setting • 30
viewing • 24
CGU (Closed user group) • 51
Characters, enter • 16
Creating messages
e-mail • 22
MMS • 21
SMS • 21
Creating organiser
anniversaries • 36
appointments • 36
memos • 37
tasks • 37
Currency conversion • 47
D
Deleting
e-mails • 25, 26
events • 37, 38
MMS • 24, 25
phonebook • 41, 43
SMS • 24, 25
Delivery reports, message • 27
Dialled calls • 44
Display
brightness • 48
language • 48
settings • 48
Diverting, calls • 49
DTMF tones, send • 20
E
E-mails
creating/sending • 22
deleting • 26
setting • 29
viewing • 25
Emergency calls • 64
F
Forwarding
e-mail • 26
MMS • 24
82
SMS • 24
H
Health and safety • 60
Holding, call • 19
I
Icons, description • 9
Inbox, messages
e-mail • 25
SMS/MMS • 23
International calls • 18
Internet • 34
K
Keypad tones, sending/muting • 20
L
Language, select • 48
Last number, redial • 18
Locking
menu functions • 54
phone • 54
SIM card • 54
M
Memory status
scheduled events • 38
Messages
CB • 24, 30
configuration • 24
e-mail • 22, 25
MMS • 21, 24
push • 24, 30
SMS • 21, 24
Missed alarm events • 38
Missed calls • 44
MMS messages
creating/sending • 21
deleting • 24
setting • 28
viewing • 23
Muting
keypad tones • 20
microphone • 20
N
Name card • 43
Names
entering • 16
searching • 41
Network band, select • 51
Network selection • 50
Network services • 49
O
Outbox, messages • 25
P
Password
call barring • 50
phone • 54
Phonecare and maintenance • 65
display • 9
icons • 9
locking • 54
password • 54
resetting • 56
switching on/off • 8
unpacking • 5
Phonebook
adding • 41
copying • 43
editing • 41
options • 41
speed-dialling • 42
Photosviewing • 39
PIN, change • 54
PIN2, change • 54
Privacy • 54
Problems, solve • 58
Push messages
setting • 30
viewing • 24
Q
Quiet mode
entering • 11
setting • 49
83 >> Index
R
Received calls • 44
Received messages
e-mail • 25
MMS • 24
SMS • 24
Redialling
automatically • 48
manually • 18
Resetting phone • 56
Road safety • 62
Roaming • 50
S
Safetyinformation • 60
precautions • 1
Security, calls • 54
Sent messages • 25
Sentbox • 25
SIM card
inserting • 6
locking • 54
SMS messages
creating/sending • 21
deleting • 24
setting • 27
viewing • 23
Sound settings • 49
Speed-dial • 42
Switching on/off
keypad tones • 20
microphone • 20
phone • 8
T
Templates • 27
Text input mode, change • 16
Text, enter • 16
Transferring, calls • 20
V
Voice memos
playing • 45
recording • 45
Voicemail server
connecting • 51
editing • 51
W
Waiting call • 50
Web browser, access • 34
World clock • 46