Samsung Electronics Co SGHI728 Celluar/PCS GSM/EDGE Phone with Bluetooth User Manual
Samsung Electronics Co Ltd Celluar/PCS GSM/EDGE Phone with Bluetooth Users Manual
Users Manual
Some of the contents in this guide may differ from your device depending on the software of the
phone or your service provider.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-xxxxxA
English. 12/2007. Rev. 1.0
SGH-i728
User’s Guide
Draft 02
2007. 12. 19
SW: PDA-i178xxxxxx
Phone-i178xxxxx
Using this guide
This user’s guide has been specially
designed to guide you through the
functions and features of your device. To
get started quickly, refer to the Quick
Start Guide.
Instructional icons
Before you start, familiarise yourself with
the icons you will see in this guide:
For any topics not covered in this
guide, please refer to the
Help
embedded in the Windows Mobile
®
6
Professional operating system.
Warning—situations that could
cause injury to yourself or
others
Caution—situations that could
cause damage to your phone
or other equipment
Note—notes, usage tips, or
additional information
X
Refer to—pages with related
information; for example:
X
p. 12 (represents “see page
12”)
→
Followed by—the order of
options or menus you must
select to perform a step; for
example: Tap
Start
→
Programs
→
Camera
(represents
Start
, followed by
Programs
, followed by
Camera
)
[ ]
Square brackets—phone keys;
for example: [ ] (represents
the Dial key)
Copyrights and trademarks
Rights to all technologies and products
that comprise this device are the
property of their respective owners:
• This product includes
software licensed from
MS, an affiliate of the
Microsoft Corporation.
Microsoft and software bearing the
Microsoft name are registered
trademarks of the Microsoft
Corporation. Before using this product,
refer to the Microsoft End User License
Agreement at the back of this guide for
information about rights and
restrictions.
• Java™ is a trademark of
Sun Microsystems, Inc.
• Bluetooth
®
is a registered trademark
of the Bluetooth SIG, Inc.
worldwide—Bluetooth QD ID:
BXXXXXX
•Windows Media Player
®
is a registered
trademark of Microsoft Corporation.
2
Contents
Safety and usage information...........4
1. Enter text 10
Change the text input method........ 10
Enter text with Onscreen Keyboard . 10
Enter text with Writing .................. 11
Enter text with Full Screen............. 11
Enter text with Samsung Panel....... 12
Enter text with Samsung Panel Full
Screen ........................................ 13
Create a sketch............................ 14
2. Communication 15
Calls ........................................... 15
Messaging ................................... 17
3. Media 20
Mini Player ...................................20
Camera........................................21
Contents Manager .........................23
Photo Slides .................................25
muveeShow..................................27
FM Radio......................................28
Mobile Flash .................................29
4. Personal productivity 30
Contacts ......................................30
Alarms.........................................34
Calendar ......................................34
BCR.............................................35
QR-code.......................................37
3
Contents
Office Mobile................................ 37
Notes.......................................... 39
Tasks.......................................... 40
5. Additional programs 41
Games ........................................ 41
Java............................................ 41
Dictionary.................................... 41
Assisted-GPS ............................... 42
Zoomer....................................... 43
File Explorer................................. 44
Search ........................................ 44
6. Web 45
China Mobile In ............................ 45
Mobile Stock ................................ 46
Monternet ....................................46
Fetion..........................................47
7. Connectivity 48
Use the Bluetooth wireless feature...48
Connect via USB ...........................50
Synchronise your device.................51
8. Troubleshooting 55
9. MICROSOFT SOFTWARE LICENSE
TERMS FOR WINDOWS MOBILE 6
SOFTWARE Agreement 59
4
Safety and usage
information
Comply with the following precautions to
avoid dangerous or illegal situations and
ensure peak performance of your device.
Safety warnings
Keep your device away from small
children and pets
Keep your device and all accessories out
of the reach of small children or animals.
Small parts may cause choking or serious
injury if swallowed.
Protect your hearing
Install mobile devices and
equipment with caution
Ensure that any mobile devices or related
equipment installed in your vehicle are
securely mounted. Avoid placing your
device and accessories near or in an air
bag deployment area. Improperly
installed wireless equipment can cause
serious injury when air bags inflate
rapidly.
Handle and dispose of batteries and
chargers with care
• Use only Samsung-approved batteries
and chargers specifically designed for
your device. Incompatible batteries
and chargers can cause serious injuries
or damage to your device.
• Never dispose of batteries in a fire.
Follow all local regulations when
disposing of used batteries.
Listening to a headset at high
volumes can damage your
hearing. Use only the minimum
volume setting necessary to hear
your conversation or music.
5
Safety and usage information
• Never place batteries or phones on or
in heating devices, such as microwave
ovens, stoves, or radiators. Batteries
may explode when overheated.
Avoid interference with pacemakers
Maintain a minimum of 15 cm (6 inches)
between mobile devices and pacemakers
to avoid potential interference, as
recommended by manufacturers and the
independent research group, Wireless
Technology Research. If you have any
reason to suspect that your device is
interfering with a pacemaker or other
medical equipment, turn off the device
immediately and contact the
manufacturer of the pacemaker or
medical equipment for guidance.
Turn off the device in potentially
explosive environments
Do not use your device at refuelling
points (service stations) or near fuels or
chemicals. Turn off your device whenever
directed by warning signs or instructions.
Your device could cause explosions or fire
in and around fuel or chemical storage
and transfer areas or blasting areas. Do
not store or carry flammable liquids,
gases, or explosive materials in the same
compartment as the device, its parts, or
accessories.
Reduce the risk of repetitive motion
injuries
When sending text messages or playing
games on your device, hold the device
with a relaxed grip, press the buttons
lightly, use special features that reduce
the number of buttons you have to press
(such as templates and predictive text),
and take frequent breaks.
Safety and usage information
6
Safety precautions
Drive safely at all times
Avoid using your device while driving and
obey all regulations that restrict the use
of mobile devices while driving. Use
hands-free accessories to increase your
safety when possible.
Follow all safety warnings and
regulations
Comply with any regulations that restrict
the use of a mobile device in a certain
area.
Use only Samsung-approved
accessories
Using incompatible accessories may
damage your device or cause injury.
Turn off the device near medical
equipment
Your device can interfere with medical
equipment in hospitals or health care
facilities. Follow all regulations, posted
warnings, and directions from medical
personnel.
Turn off the device or disable the
wireless functions when in an
aircraft
Your device can cause interference with
aircraft equipment. Follow all airline
regulations and turn off your device or
switch to a mode that disables the
wireless functions when directed by the
airline personnel.
7
Safety and usage information
Protect batteries and chargers from
damage
• Avoid exposing batteries to very cold or
very hot temperatures (below 0° C/32°
F or above 45° C/115° F). Extreme
temperatures can reduce the charging
capacity and life of your batteries.
• Prevent batteries from contacting
metal objects, as this can create a
connection between the + and -
terminals of your batteries and lead to
temporary or permanent battery
damage.
• Never use a damaged charger or
battery.
Handle your device carefully and
sensibly
• Do not allow your device to get wet—
liquids can cause serious damage. Do
not handle your device with wet hands.
Water damage to your device can void
your manufacturer’s warranty.
• Avoid using or storing your device in
dusty, dirty areas to prevent damage
to moving parts.
• Your device is made of complex
electronics—protect it from impacts
and rough handling to avoid serious
damage.
• Do not paint your device, as paint can
clog moving parts and prevent proper
operation.
• Avoid using the device’s camera flash
or light close to the eyes of children or
animals.
Safety and usage information
8
• Your device and memory cards may be
damaged by exposure to magnetic
fields. Do not use carrying cases or
accessories with magnetic closures or
allow your device to come in contact
with magnetic fields for extended
periods of time.
Avoid interference with other
electronic equipment
Your device emits radio frequency (RF)
signals that may interfere with
unshielded or improperly shielded
electronic equipment, such as
pacemakers, hearing aids, and medical
equipment in homes or vehicles. Consult
the manufacturers of your electronic
equipment to solve any interference
problems you experience.
Important usage information
Use your device in the normal
position
Avoid contact with your device’s internal
antenna.
Allow only qualified personnel to
service your device
Allowing unqualified personnel to service
your device may result in damage to your
device and will void your warranty.
Ensure maximum battery and
charger life
• Avoid charging batteries for more than
a week, as overcharging may shorten
battery life.
• Over time, unused batteries will
discharge and must be recharged
before use.
9
Safety and usage information
• Disconnect chargers from power
sources when not in use.
• Use batteries only for their intended
purpose.
Handle SIM cards and memory cards
with care
• Do not remove a card while the device
is transferring or accessing
information, as this could result in loss
of data and/or damage to the card or
device.
• Protect cards from strong shocks,
static electricity, and electrical noise
from other equipment.
• Frequent writing and erasing will
shorten the life span of memory cards.
• Do not touch gold-coloured contacts or
terminals with your fingers or metal
objects. If dirty, wipe the card with a
soft cloth.
Ensure access to emergency services
Emergency calls from your device may
not be possible in some areas or
circumstances. Before travelling in
remote or undeveloped areas, plan an
alternate method of contacting
emergency services personnel.
Specific Absorption Rate (SAR)
certification information
Your device conforms to European Union
(EU) standards that limit human
exposure to radio frequency (RF) energy
emitted by radio and telecommunications
equipment. These standards prevent the
sale of mobile devices that exceed a
maximum exposure level (known as the
Specific Absorption Rate, or SAR) of 2.0
watts per kilogram of body tissue.
10
1
Enter text
With your device’s touch screen and
stylus, you can type or write text and
create drawings in notes, documents,
and messages.
Change the text input
method
When you tap a text field, your device
will show an input panel at the bottom of
the screen. You can tap the arrow next to
the input panel and choose one of the
following input methods for entering
text:
• Onscreen Keyboard ( )
•Writing ( )
• Full Screen ( )
• Samsung Panel ( )
• Samsung Panel Full Screen ( )
You can tap the input panel icon at any
time to show or hide the input panel.
Enter text with
Onscreen Keyboard
1. Change the text input method to
Onscreen keyboard
(see “Change
the text input method”).
2. Tap to show the input panel.
3. Tap to enter Chinese or to
enter English.
4. Tap characters to enter your text.
To switch to numbers or symbols, tap
.
11
Enter text
Enter text with Writing
Use the stylus to write individual letters
and numbers on the screen.
1. Change the text input method to
Writing
(see “Change the text input
method”).
2. Tap to show the input panel.
3. Write each character in the writing
area at the bottom of the screen.
4. If necessary, select a character.
To switch to English characters, tap .
To switch to numbers, tap . Other
functions are shown below:
Enter text with Full
Screen
With Full Screen, you can write anywhere
on the screen. Unlike other text input
methods, you can use cursive (joined-up)
handwriting to write complete words.
1. Change the text input method to
Full
Screen
(see “Change the text input
method”).
2. Tap to show the input panel.
3. Write each character anywhere on the
screen.
4. If necessary, select a character.
Clear (backspace)
Clear
Insert a space
Insert symbols
Start a new line
Enter text
12
To switch to English characters, tap .
To switch to numbers, tap . Other
functions are shown below:
Enter text with
Samsung Panel
Enter pinyins
1. Change the text input method to
Samsung Panel
(see “Change the
text input method,”
X
10).
2. Tap to show the input panel.
3. Write each character in the writing
area at the bottom of the screen.
4. Select the pinyin you want.
The selected pinyin will be converted
to the corresponding Chinese
character.
5. Select a tone.
6. If necessary, select a character.
You can complete a word by selecting the
next character available for the entered
character.
Enter strokes
1. Change the text input method to
Samsung Panel
(see “Change the
text input method,”
X
10).
2. Tap to show the input panel.
3. Write each character in the writing
area.
4. If necessary, select a character.
Clear (backspace)
Clear
Insert a space Start a new line
Insert symbols
13
Enter text
You can complete a word by selecting the
next character available for the entered
character.
Enter English characters
1. Change the text input method to
Samsung Panel
(see “Change the
text input method,”
X
10).
2. Tap to show the input panel.
3. Tap .
4. Write each character in the writing
area.
To change case, tap the arrow next to
and select a case type.
5. If necessary, select a character.
You can open an onscreen keyboard by
selecting to enter English characters.
You can also insert numbers in the
different format.
Enter text with
Samsung Panel Full
Screen
1. Change the text input method to
Samsung Panel Full Screen
(see
“Change the text input method,”
X
10).
2. Tap to show the input panel.
3. Write each character anywhere on the
screen.
4. If necessary, select a character.
To switch to English characters, tap .
To switch to numbers, tap . Other
functions are shown below:
Clear (backspace)
Clear
Insert a space
Start a new line
Open the onscreen
keyboard
Enter text
14
Create a sketch
With Notes, you can create and capture
sketches.
1. From the Today screen, tap
Start
→
Programs
→
Notes
.
2. Make a stroke that crosses at least
three ruled lines to start a drawing
frame.
3. Continue your sketch with strokes.
Sketches that do not cross three ruled
lines will be treated as writing.
To edit a sketch, tap
Menu
→
Draw
. Tap
and hold the stylus pen on the strokes
until the selection handles appear. You
can then tap and hold the handles to drag
and resize the drawing or tap
Menu
to
access other options.
15
2
Communication
Your device allows you to send and
receive many types of calls and
messages over cellular networks and the
internet.
Calls
Learn to use your device’s call functions.
Make a call
1. Press [ ].
2. Tap the number keys to enter a phone
number.
3. Tap
Talk
or press [ ].
4. To end the call, tap
End
or press [ ].
Answer a call
1. Press [ ].
2. To end the call, tap
End
or press [ ].
Reject a call
Tap
Ignore
or press [ ].
Call an international number
1. Press [ ].
2. Tap and hold
0
to insert the +
character (this replaces the
international access code).
When you reject a call, the caller will
hear a busy tone.
Communication
16
3. Tap the number keys to enter the
complete number you want to dial
(country code, area code, and phone
number), and then tap
Talk
or press
[].
4. To end the call, tap
End
or press [ ].
Make a call from the contact list
1. From the Today screen, tap
Start
→
Contacts
.
2. Scroll to a contact and tap the
contact’s name.
3. Tap the number you want to dial.
4. To end the call, tap
End
or press [ ].
Insert a pause
When calling automated systems, you
can enter a pause between the phone
number and another set of numbers. To
insert an automatic pause, tap .
Make a call from Call History
1. Press [ ].
2. Tap
Call History
.
3. Tap
Menu
→
Filter
→
a call type to
show only one type of calls (optional).
4. Scroll to a contact and tap the
contact’s name.
5. Tap the number you want to call.
6. To end the call, tap
End
or press [ ].
To search for a contact, tap the
Enter a name
field and enter a
few letters of the contact’s name.
17
Communication
Forward calls
1. From the Today screen, tap
Start
→
Settings
→
Phone
.
2. From the
Services
tab, tap
Call
Forwarding
→
Get Settings...
3. Tap a forwarding option and enter a
phone number.
4. Tap .
Bar (block) calls
1. From the Today screen, tap
Start
→
Settings
→
Phone
.
2. From the
Services
tab, tap
Call
Barring
→
Get Settings...
3. Tap the type of calls you want to bar.
4. Tap .
Messaging
Learn to use messaging functions. For
instructions on entering text, see “Enter
text,”
X
10.
Send a text or multimedia
message
1. From the Today screen, tap
Start
→
Messaging
→
Messaging
.
2. Tap
Menu
→
New
.
3. Enter a destination number or tap
Menu
→
Add Recipients
to select a
contact.
4. Tap the stylus in the message body.
5. Enter your message text.
For sending as a text message, skip to
step 8. For adding a message subject
and attaching multimedia, continue
with step 6.
Communication
18
6. Tap the
Subject
field and enter a
message subject. Tap
Yes
before
entering the subject.
7. Tap an attachment icon to add a file to
the message:
• : attach a picture
• : attach a music file
• : attach a video
• : capture and attach a photo
• : record and attach a voice memo
8. When you are finished, tap
Send
.
Send an email message
Before you can send email, you must
create an email account.
1. From the Today screen, tap
Start
→
Messaging
.
2. Tap the name of an email account.
3. Tap
Menu
→
New
.
4. Enter the recipient’s address in the
To
field or tap
Menu
→
Add recipient
to
select a contact.
5. Tap the subject field and enter a
message subject.
6. Tap and hold the stylus in the message
body.
7. Enter your message text.
8. To add an attachment, tap
Menu
→
Insert
→
an attachment type.
9. When you are finished, tap
Send
.
The
Bc
and
Bcc
fields are located
above the
From
field.
19
Communication
Retrieve email from a web server
Before you retrieve email from an
internet service provider or VPN
connection, you must create an email
account.
To retrieve messages from your Outlook
account, see “Synchronise your data,”
X
53.
1. From the Today screen, tap
Start
→
Messaging
.
2. Tap the name of an email account.
3. Tap
Menu
→
Send Receive
.
View messages
You can access message folders for all
your messaging accounts (email, SMS,
and MMS) in one location.
To view messages,
1. From the Today screen, tap
Start
→
Messaging
.
2. Tap
Messaging
or the name of an
email account.
The Inbox for the account you selected
will open.
While viewing message folders, you
can switch message folders or
accounts by using the drop-down
menu at the top left of the screen.
20
3
Media
Learn to use the Mini Player, Camera,
Contents Manager, Photo Slides,
muveeShow, FM radio, and Mobile Flash.
To learn about your device’s other media
functions, refer to the Windows Mobile
Help.
Mini Player
Mini Player allows you to listen to music
files while you work with other programs.
Before you can use Mini Player, you must
add files to your device by downloading
them from the internet, transferring
them from a memory card, or syncing the
device to your PC.
To launch Mini Player, tap
Start
→
Programs
→
Mini Player
.
Use the following controls to operate the
Mini Player:
Icon Function
Play
Pause
Skip forward; scan forward (tap
and hold)
Sskip backward; scan backward
(tap and hold)
Mute
21
Media
Camera
With the Camera, you can capture digital
images and videos.
Capture a photo
1. Tap
Start
→
Programs
→
Camera
or
press and hold the Camera key.
2. Rotate the device 90° counter-
clockwise to the landscape orientation.
3. Aim the lens at the subject and make
adjustments:
• Scroll right or left to adjust the
brightness
• Scroll up or down to zoom
4. Press the Camera key or the Centre
key to capture the image.
5. Tap to save the image and return
to the viewfinder, or press the Centre
key to send the image as a multimedia
message.
View a photo
1. Tap
Start
→
Programs
→
Contents
Manager
.
2. Tap the drop-down menu in the top left
of the screen and select
My Device
.
3. In the list of folders, tap
My
Documents
→
My Pictures
.
4. Tap a photo name or thumbnail to
open it.
You cannot launch Mini Player while
using the Camera.
Media
22
Adjust Camera settings
From the viewfinder, tap the screen to
show the following icons. Tap an icon,
and then tap a setting.
Record a video
1. Tap
Start
→
Programs
→
Camera
or
press and hold the Camera key.
2. Rotate the device 90° counter-
clockwise to the landscape orientation.
3. Tap
→
Camcorder
.
4. Aim the lens at the subject and make
adjustments:
• Scroll right or left to adjust the
brightness
• Scroll up or down to zoom
5. Tap the Camera key or the Centre key
to begin recording.
6. When you are finished, tap the Camera
key or the Centre key to stop
recording.
7. Tap to save the video and return to
the viewfinder.
Icon Function
Mode (switch to camcorder)
Scene mode
Shot mode
Picture size
White balance
Timer
23
Media
Play a video
1. Tap
Start
→
Programs
→
Contents
Manager
.
2. In the list of folders, tap
My
Documents
→
My Videos
.
3. Tap a video name or thumbnail to open
it.
Adjust Camcorder settings
From the viewfinder, tap the screen to
show the following icons. Tap an icon,
and then tap a setting.
Contents Manager
With Contents Manager, you can view and
access all the files and folders on your
device.
To launch the Contents Manager from the
Today screen, tap
Start
→
Programs
→
Contents Manager
.
Icon Function
Mode (switch to camera)
Video mode
Video size
White balance
Timer
Audio
Icon Function
Media
24
View a photo
1. Tap the drop-down menu in the top left
of the screen and select
My Device
.
2. In the list of folders, tap
My
Documents
→
My Pictures
.
3. Tap a photo name or thumbnail to
open it.
While viewing photos, you can perform
the following functions:
• To scroll through your photos, tap
or .
• To edit the picture, tap
Menu
→
Edit
Image
.
• To set a photo as a background or
caller ID image, tap
Menu
→
Set as
→
an option.
• To send the photo, tap
Menu
→
Send
→
a sending method.
• To view your photos as a slideshow, tap
Menu
→
Play Slide Show
.
Play a video
1. From the Contents Manager screen,
tap the drop-down menu in the top left
of the screen and select
My Device
.
2. In the list of folders, tap
My
Documents
→
My Videos
.
3. Tap a video name or thumbnail to open
it.
Open documents
1. From the Contents Manager screen,
locate and open the folder where the
document is stored.
2. Tap and hold the document name or
thumbnail image to open it.
25
Media
Send a file
1. From the Contents Manager screen,
locate and open the folder where the
file is stored.
2. Send the file via multimedia message,
email, or Bluetooth:
• Multimedia: Tap
Menu
→
Send
→
as
MMS
• Email: Tap
Menu
→
Send
→
as
E-mail
• Bluetooth: Tap
Menu
→
Send
→
via
Bluetooth
For more details on sending multimedia
and email messages, see “Messaging,”
X
17. For more details on sending files via
Bluetooth, see “Use the Bluetooth
wireless feature,”
X
48.
Photo Slides
Photo Slides allows you to create photo
albums, edit photos, and view slideshows
with background music.
Create a photo album
1. From the Today screen, tap
Start
→
Programs
→
Photo Slides
.
2. Tap
Menu
→
Create album
.
3. Enter an album name, set the creation
date, and tap
OK
.
4. Locate a photo in another album and
tap
Menu
→
Edit
→
Copy
.
5. Tap the name of your new album, and
then tap
Menu
→
Edit
→
Paste
.
Media
26
Edit photos
1. From the Photo Slides screen, tap a
thumbnail twice to open the photo.
2. Tap
Menu
→
an editing option:
•
Rotate Left
(90° counter-clockwise)
•
Rotate Right
(90° clockwise)
•
Crop
•
Effect
(Original, Black & White,
Sepia, or Enhance)
3. To save your changes, tap .
View slideshows with
background music
1. From the Photo Slides screen, tap a
photo album.
2. Tap
Menu
→
Slide show
.
3. During a slideshow, tap the screen to
display the following controls:
To adjust the volume during a slideshow,
press the navigation key up or down.
Icon Function
Pause
Stop
Play
Skip to next photo
Skip to previous photo
Rotate photo
Change background music
Quit slideshow
27
Media
muveeShow
muveeShow allows you to create photo
movies, or muvee, on your device.
Create a muvee
1. From the Today screen, tap
Start
→
Programs
→
muveeShow
→
New
Project
.
2. Tap an empty thumbnail.
3. Locate and open a folder and select
photos.
4. Tap
Next
to select a style.
5. Scroll left or right to change the style.
Each style contains a set of visual
effects and background music, which
are applied to your pictures to create
your muvee.
6. If necessary, tap
User defined music
→
Browse
→
a music track to select
the background music.
7. Tap
Next
to automatically create and
preview your muvee.
8. When you are satisfied, tap
Next
.
9. Change the settings for saving the
muvee and tap
Save
.
The muvee is saved in the
My
Documents
folder.
Open a muvee
1. From the Today screen, tap
Start
→
Programs
→
muveeShow
→
Open
Project
.
2. Select the muvee you want.
Media
28
FM Radio
You can listen to your favourite stations
with the FM radio.
Listen to the FM radio
1. Plug a headset into the multifunction
jack.
2. From the Today screen, tap
Start
→
Programs
→
FM Radio
.
3. Scroll left or right to scan through
available radio stations.
4. To adjust the volume level, press the
Volume key.
To switch sound output to the
loudspeaker, tap
Menu
→
Speaker
on
.
To record the radio on the device, tap
REC
.
Set up your favourite radio
station list
Once you have set up a station list, you
can access the stations by scrolling left or
right from the radio screen.
Save radio stations by automatic
tuning
1. From the radio screen, tap
Channels
to access the station list.
2. Tap
Menu
→
Self-tuning
(this will
replace any existing stations).
3. When you are finished, press
<
Done
>.
Save a radio station manually
1. From the radio screen, scroll to the
radio station you want.
29
Media
2. Tap
Menu
→
Add to Presets
.
3. Enter a desciption of the station and
tap
Done
.
Mobile Flash
Your device includes the flash player for
viewing Flash (swf) files.
To view a Flash file,
1. From the Today screen, tap
Start
→
Programs
→
Mobile Flash
.
2. Scroll to a Flash file and press the
Centre key (scroll right to locate files
stored on a memory card).
30
4
Personal productivity
Learn to use Contacts, Alarms, Calendar,
BCR, QR-code, Office Mobile, Notes, and
Tasks.
Contacts
Use Contacts to store personal
information, such as names, phone
numbers, and addresses.
Create a new Outlook contact
1. From the Today screen, tap
Start
→
Contacts
→
New
→
Outlook Contact
.
2. Enter contact information.
3. When you are finished, tap .
Create a new SIM contact
1. From the Today screen, tap
Start
→
Contacts
→
New
→
SIM Contact
.
2. Enter the contact’s name and number.
3. When you are finished, tap .
Search for a contact card
1. From the Today screen, tap
Start
→
Contacts
.
2. Tap the
Enter a name...
field and
enter a few letter of the contact’s
name.
As you enter letters, the screen will
show contacts that match your entry.
3. Tap the contact’s name to open the
contact card.
31
Personal productivity
Copy or move contact cards
You can copy your contact cards from
your device to your SIM card and vice
versa. When you copy an Outlook contact
to your SIM card, you can only store the
contact’s name and phone number. To
retain all the contact information, sync
your Outlook contacts with a PC (see
“Synchronise your data,”
X
53).
To copy an Outlook contact to your SIM
card,
1. From the Today screen, tap
Start
→
Contacts
.
2. Tap a contact’s name to open the
contact card.
3. Tap
Menu
→
Save to SIM
.
To copy an SIM contact to your device,
1. From the Today screen, tap
Start
→
Contacts
.
2. Tap a contact’s name to open the
contact card.
3. Tap
Menu
→
Save to Contacts
.
Assign a speed dial number to a
contact card
1. From the Today screen, tap
Start
→
Contacts
.
2. Tap a contact’s name to open the
contact card.
3. Tap
Menu
→
Add to Speed Dial...
4. Select a phone number to add to
speed dial with the
Number
drop-
down, if necessary.
Personal productivity
32
5. Tap the up or down arrows next to the
Location
field to set a speed dial
number.
6. When you are finished, tap .
Assign an image or ringtone to a
contact card
1. From the Today screen, tap
Start
→
Contacts
.
2. Tap a contact’s name to open the
contact card.
3. Tap
Menu
→
Edit
.
4. To assign an image, tap the
Picture
field, select an image.
5. To assign a ringtone, tap the
Ring
tone
field and select a ringtone.
6. When you are finished, tap .
Work with the favourite contacts
You can send media files via MMS or
Bluetooth or share the media fils. You can
also share your current feeling with the
friends by sending hugs (flash files which
express emotions). See the Quick Start
Guide to learn about adding the favourite
contacts to the Today screen.
To make a call:
1. On the Today screen, tap a contact
picture.
2. Tap the Call icon to make a call to the
contact's phone number.
To send a text message:
1. On the Today screen, tap a contact
picture.
2. Tap the SMS icon to send a text
message to the contact's phone
number.
33
Personal productivity
To send a hug:
1. On the Today screen, tap a contact
picture.
2. Tap the Hug icon to open the hug
library.
3. Scroll to a hug and tap
Send
to send
to the contact.
When you receive a hug, tap
Play
to play
the hug or
Dismiss
to dismiss the
notification. Received hugs will be
removed from your device after you are
notified.
To share media files with friends:
1. On the Today screen, tap a contact
picture.
2. Tap the Share icon to open the
ShareInbox.
The
My Documents
folder will open.
3. Locate and select a media file to send.
4. Select one of the following sending
method:
• Multimedia: Tap
Share by MMS
• Bluetooth: Tap
Share by Bluetooth
For more details on sending
multimedia, see “Messaging,”
X
17.
For more details on sending files via
Bluetooth, see “Use the Bluetooth
wireless feature,”
X
48.
5. If you want to assign the image or
ringtone to you, tap the check box
next to
Recommend as contact
image
or
Recommend as contact
ringtone
.
When you receive images or ringtones,
they will be saved in the ShareInbox.
Personal productivity
34
Alarms
Learn to set and control alarms for
important events.
Set a new alarm
1. From the Today screen, tap
Start
→
Programs
→
Alarms
.
2. Tap an empty alarm.
3. Set alarm details.
4. When you are finished, tap
Done
.
Stop an alarm
When the alarm sounds,
•Tap
Ok
to stop an alarm without
snooze.
•Tap
Dismiss
to stop an alarm with
snooze or tap
Snooze
to silence the
alarm for the snooze period.
Calendar
Use the Calendar to keep track of
appointments, birthdays, or other events.
Create a calendar event
1. From the Today screen, tap
Start
→
Calendar
.
2. Tap
Menu
→
New Appointment
.
3. Enter the details of the appointment.
4. When you are finished, tap .
Change the calendar view
1. From the Today screen, tap
Start
→
Calendar
.
2. Tap
Menu
→
View
→
a view type.
35
Personal productivity
Stop an event alarm
When the alarm sound for a calendar
event you set previously, tap
Dismiss
.
BCR
BCR allows you to quickly create new
contacts from business cards. You can
capture a photo of a business card and
then extract the contact information to
Outlook.
Capture and convert an image of
a single business card
1. Place the business card on a flat, well-
lit surface.
2. From the Today screen, tap
Start
→
Programs
→
BCR
.
3. Position the device over the business
card, so that the green frame on the
viewfinder aligns with the edges of the
business card.
4. Press the Camera key to capture the
image.
5. Edit any contact details that were not
converted correctly, and then tap
Save
.
6. Tap to confirm.
As you align the frame in the
viewfinder with the edges of the
business card, they will change
from green to yellow. If you can
align all four edges of the frame at
once, BCR will automatically
capture the image.
Personal productivity
36
Capture and convert images of
multiple business cards
If you have multiple business cards to
convert, you can capture images of each
of them and then convert them to
contacts all at once.
1. From the Today screen, tap
Start
→
Programs
→
BCR
.
2. Tap
Menu
→
Multi-shot
.
3. Place a business card on a flat, well-lit
surface.
4. Position the device over the business
card, so that the green frame on the
viewfinder aligns with the edges of the
business card.
5. Press the Camera key to capture the
image.
6. Repeat steps 3-5 as necessary to
capture additional images.
7. When you are finished capturing
images, tap
Load Image
.
8. Tap the check box on each thumbnail
you want to convert.
9. Tap
Recognise
.
10.Edit any contact details that were not
converted correctly, and then tap
Save
.
As you align the frame in the
viewfinder with the edges of the
business card, they will change
from green to yellow. If you can
align all four edges of the frame at
once, BCR will automatically
capture the image.
37
Personal productivity
11.Tap to confirm.
12.Repeat steps 10-11 until you have
saved all the contacts.
QR-code
Your device has the ability to read and
recognise Quick Response (QR) codes
that are created exclusively for mobiles.
With this program, you can decode a QR
code and get various information on the
corresponding content or service.
To scan and save QR codes,
1. From the Today screen, tap
Start
→
Programs
→
QR-code
.
2. Tap
Barcode recognition
to access
Capture mode.
3. Tap
Recognition
.
When decoding is completed, a QR
code is displayed as an appropriate
data format.
4. Tap
Menu
→
Save to folder
.
The data is saved to the data folder in
My Documents
.
5. When you are finished, tap
Get
Barcode
to return to Capture mode.
Office Mobile
With Office Mobile, you can create and
edit Excel workbooks and Word
documents or open and view PowerPoint
slideshows. Your device supports files
created with Office 97 and newer
versions.
Personal productivity
38
Create and edit an Excel
workbook
1. From the Today screen, tap
Start
→
Office Mobile
→
Excel Mobile
.
2. Tap a cell to select it.
3. Enter values or text with the input
panel, and then tap .
4. Repeat steps 2-3 as necessary.
5. To format cells, tap
Menu
→
Edit
,
Insert
,
Format
, or
Tools
.
6. To save the workbook, tap .
For more details, refer to the online help.
Create and edit a Word
document
1. From the Today screen, tap
Start
→
Office Mobile
→
Word Mobile
.
2. Tap
New
to create a new document.
3. Create your document with the input
panel.
4. To change the font or paragraph
format, tap
Menu
→
Format
→
Font
or
Paragraph
.
5. To save the workbook, tap .
For more details, refer to the online help.
Open and view a PowerPoint
slideshow
1. From the Today screen, tap
Start
→
Office Mobile
→
PowerPoint Mobile
.
2. Tap the drop-down menu in the top left
of the PowerPoint screen to locate a
PowerPoint file.
3. Tap the filename to launch the
slideshow.
39
Personal productivity
4. To advance the slides, tap the screen.
5. To go back to the previous slide, tap
→
Previous
.
6. To end the slideshow, tap
→
End
Show
.
Create and edit a note
1. From the Today screen, tap
Start
→
Office Mobile
→
OneNote Mobile
.
2. Tap
New
to create a new note.
3. Create your note with the input panel.
4. To change the format, highlight the
text first, and then tap
Menu
→
Format
→
a type.
5. To add pictures or voice memos, tap
Menu
→
Insert Picture
or
Insert
Recording
.
6. To save the note, tap .
Notes
Use Notes to create memos, sketches,
and recordings.
Create a note
1. From the Today screen, tap
Start
→
Programs
→
Notes
.
2. Tap
New
.
3. Create your note.
4. When you are finished, tap .
Send a note
1. From the Today screen, tap
Start
→
Programs
→
Notes
.
2. Tap and hold the name of a note you
want to send or create a new note.
Personal productivity
40
3. Tap a sending method (multimedia
message, email, or Bluetooth).
• Multimedia: Tap
Send via MMS
• Email: Tap
Send via E-mail
• Bluetooth: Tap
Beam File...
For more details on sending multimedia
and email messages, see “Messaging,”
X
17. For more details on sending files via
Bluetooth, see “Use the Bluetooth
wireless feature,”
X
48.
Tasks
With Tasks, you can create to-do lists and
reminders.
Create a task
1. From the Today screen, tap
Start
→
Programs
→
Tasks
.
2. Tap
Menu
→
New Task
.
3. Enter details for the task.
4. When you are finished, tap .
Mark a task as completed
When you have completed a task, return
to the Tasks screen (tap
Start
→
Programs
→
Tasks
) and tap the check
box next to the task name. Once you
have marked a task completed, you will
no longer receive any scheduled
reminders for that task.
To set a reminder for the task, tap
the
Due
field and set a due date.
Tap the
Reminder
field, select
Remind me
, and then specify the
time and date of the reminder.
41
5
Additional programs
Learn to use Games, Java, Dictionary,
Assisted-GPS, Zoomer, File Explorer, and
Search.
Games
Play fun games, such as Bubble Breaker
and Solitaire. You can also download and
play new Java games.
From the Today screen, tap
Start
→
Programs
→
Games
.
Java
Java is a folder where downloaded games
are stored.
From the Today screen, tap
Start
→
Programs
→
Java
.
Dictionary
Learn to look up definitions and capture
words from other programs to add to
your dictionaries.
Look up a word
1. From the Today screen, tap
Programs
→
Dictionary
.
2. Enter a word in the input field.
3. Select a word or phrase from the left
side of the screen.
• To look up a related word, double-tap
the word.
• To listen to a pronunciation, tap
or
Pronounce
.
• To add the word to you word list, tap
Menu
→
Add to New word-list
.
Additional programs
42
Capture words and add them to
your dictionary
Start by seting a shortcut key to use
when capturing words:
1. From the Today screen, tap
Programs
→
Dictionary
→
Menu
→
Setting of
Screen Capturing
.
2. Select a key in
Key setting of word
capturing
.
3. Tap
OK
.
After you have set the shortcut key,
1. Open
Notes
,
Tasks
,
Word Mobile
,
OneNote Mobile
, or
Excel Mobile
.
2. Highlight a word with your stylus.
3. Press the shortcut key you set for
capturing words.
4. When you are finished, close the pop-
up window or tap
Menu
→
Back
Application
to return to the program
you were using.
View your word list
From the Today screen, tap
Programs
→
Dictionary
→
Menu
→
Open New
word-list
. To delete a word, highlight
the word and then tap
Delete
. To clear
the word list, tap
Delete all
.
Assisted-GPS
Assisted-GPS (A-GPS) helps improve the
performance of GPS receivers by
providing them with data that they would
ordinarily have to download from the GPS
satellites. With A-GPS data, GPS
receivers can operate faster and more
reliably.
43
Additional programs
Before you use A-GSP, first set the GPS
ports for receiving GPS data on the
External GPS. From the Today screen, tap
Start
→
Settings
→
Systems
tab
→
External GPS
.
1. From the Today screen, tap
Start
→
Settings
.
2. From the
Systems
tab, tap
A-GPS
→
Enable
.
3. Set the number of times (in seconds)
your device refreshes the A-GPS data.
4. If you want to sync the current time
with A-GPS, tap the check box next to
Time auto-synchromizes with
A-GPS
.
5. When you are finished, tap .
Zoomer
With Zoomer, you can zoom in or out on
the screen to view your documents or
messages.
1. From the Today screen, tap
Start
→
Programs
→
Zoomer
.
When the program launches, a
magnifying glass appears and the
screen automatically zooms in.
2. Press the Volume key to zoom in or
out.
3. Drag the stylus to scroll through the
screen.
When you run Zoomer for the first
time, tap
Yes
and assign a shortcut
for Zoomer to a key, or tap
No
to
skip the assignment process.
Additional programs
44
File Explorer
With File Explorer, you can browse all the
files and folders on your device. From the
Today screen, tap
Start
→
Programs
→
File Explorer
.
To move to a higher-level folder, tap Up.
Tap Menu to rename, delete, or edit your
files and folders.
Search
You can serach for files and folders on
your device.
1. From the Today screen, tap
Start
→
Programs
→
Search
.
2. Enter part of a file or folder name in
the
Search for
field.
3. Tap
Search
.
4. To open an item in the
Results
list,
tap the item’s name.
You can restrict your search by
selecting a data type from the
Type
drop-down list.
45
6
Web
Learn to use Monternet, China Mobile In
services, Mobile Stock, and Fetion. For
information about connecting to the
internet and working with Internet
Explorer, refer to the Windows Mobile
Help on your device and the online help.
China Mobile In
From the Today screen, tap
Launcher
→
China Mobile In
to access the following:
•
Wireless Music
: download music files
on your phone
•
Games
: get information about games
and download a variety of games
•
News & Weather
: get the latest news
and weather reports
•
IM (Fetion)
: use the chatting service
(see “Fetion,”
X
47)
•
Mobile TV
: watch popular movies and
TV
•
Push-Email box
: receive emails from
your preset account assigned by your
service provider, and reply promptly
when a new email arrives
•
Phonebook Manager
: access an
online Phonebook service, where you
can manage contacts on the wireless
web and synchronise Phonebook with
the online Phonebook
•
QR-code
: capture QR codes and
decode them to get information (see
“QR-code,”
X
37)
•
Finance Online
: use the online stock
transaction service or check market
conditions
Web
46
•
What’s new
: get your service
provider's latest offerings
•
STK Applications
: use a variety of
additional services offered by your
service provider, if this service is
supported by your SIM card
•
My Monternet
: access or download
your favourite content
•
Monternet
: connect to Monternet
•
Customer Service
: get a variety of
information and convenient service
numbers
Mobile Stock
Mobile Stock is a Windows Mobile
software for mobile phones to use online
stock transaction services. For more
information, contact your service
provider.
From the Today screen, tap
Start
→
Programs
→
Mobile Stock
.
Monternet
If your service provider offers over-the-
air digital data coverage in your area,
Monternet service, which is a WAP portal
service of China Mobile.
From the Today screen, tap
Launcher
→
Monternet
.
To access My Monternet, tap
Launcher
→
China Mobile In
→
My Monternet
.
47
Web
Fetion
With Fetion, you can remain available to
other users by receiving and sending
instant messages. You can use Short
Message mode to send instant messages
through Short Message Service (SMS).
Sign in
From the Today screen, tap
Start
→
Programs
→
Fetion
. The login process
begins automatically.
You need to login to the instant message
server with your Fetion service account.
Chat in Login mode
1. From the contact list, tap
Operation
→
Send Instant Information
.
2. Enter a message into the input field.
While entering message, tap
Operation
→
Quick Input
to insert a
text template.
3. Tap
Send
to send the message.
Switch to Short Message mode
1. From the contact list, tap
Option
→
Return to Short Message Mode
.
2. Chatting in Short Message mode is the
same as in Login mode, except that
file transfer is not available. See “Chat
in Login mode.”
48
7
Connectivity
Learn to transfer data to and from your
device via the Bluetooth wireless feature
or the PC data cable, and synchronise
your device to a PC with ActiveSync. For
details on connecting to the internet or a
virtual private network (VPN), refer to
the Windows Mobile Help on your device.
Use the Bluetooth
wireless feature
You can connect with other Bluetooth-
enabled wireless devices over a distance
of 10 metres (30 feet). Walls or other
obstacles between devices may block or
impair the wireless connection.
Turn on the Bluetooth wireless
feature
1. From the Today screen, tap
Start
→
Settings
.
2. From the
Connections
tab, tap
Bluetooth
.
3. From the
Mode
tab, tap the check box
next to
Turn on Bluetooth
.
4. To allow other devices to find and
connect to your device, tap the check
box next to
Make this device visible
to other devices
.
5. Tap .
49
Connectivity
Search for and pair with a
Bluetooth-enabled device
1. From the Today screen, tap
Start
→
Settings
.
2. From the
Connections
tab, tap
Bluetooth
.
3. From the
Devices
tab, tap
Add new
device...
Your device will search for and display
a list of Bluetooth-enabled devices.
4. Tap a device name, and then tap
Next
.
5. Enter the 1- to 16-digit Bluetooth PIN
code for the device you are trying to
connect to and tap
Next
.
6. If necessary, change the display name
for the other device and select the
services you want.
7. Tap
Finish
.
Send data via the Bluetooth
wireless feature
1. Locate an item or file to send.
2. Tap
Menu
→
Send
→
via Bluetooth
or
Menu
→
Beam
.
3. Tap a device from the list.
Receive data via the Bluetooth
wireless feature
1. From the Today screen, tap
Start
→
Settings
.
2. From the
Connections
tab, tap
Beam
.
3. Tap the check box next to
Receive all
incoming beams
.
4. When prompted to allow incoming
data, tap
Yes
.
Connectivity
50
Set up a Bluetooth COM port
When you have many files to send, you
can establish a Bluetooth COM port.
1. From the Today screen, tap
Start
→
Settings
.
2. From the
Connections
tab, tap
Bluetooth
.
3. From the
COM Ports
tab, tap
New
Outgoing Port
or
New Incoming
Port
.
4. For outgoing ports, tap the name of a
device, and then tap
Next
.
5. Select a COM port.
6. Tap the check box next to
Secure
Connection
to create a secure
connection between the devices.
7. Tap
Finish
.
Connect via USB
Set a default action for your USB
connection
To set your device to perform a default
action when you connect the device to a
PC with the PC data cable,
1. From the Today screen, tap
Start
→
Settings
.
2. From the
System
tab, select
USB
Connection Mode
.
3. Set the default USB mode
(
ActiveSync
or
Mass Storage
).
To use ActiveSync, see “Synchronise
your device.”
51
Connectivity
Transfer files to a mass storage
1. Insert a memory card (see the Quick
Start Guide).
2. Change the USB connection to
Mass
Storage
.
3. Connect your device to a PC with the
PC data cable.
4. Select
Open folder to view files
when a pop-up window appears on
your PC.
5. Transfer files to the memory card and
vise versa.
6. When you are finished, disconnect the
device from the PC.
Synchronise your device
With ActiveSync, you can synchronise
your device with a PC and back up and
restore your data.
Microsoft ActiveSync works only with
Window XP SP2 or earlier. If you have
Windows Vista, your synchronization
settings will be menaged through the
Windows Mobile Device Center.
Windows Mobile Device Center is
available through the Windows Mobile
Device Center page. For more
information, visit
the Microsoft
website (http://
www.microsoft.com).
Connectivity
52
Install ActiveSync on your PC
Before you can synchronise your data,
you must install ActiveSync, either from
the supplied CD-ROM or the Microsoft
website (http://www.microsoft.com).
To install ActiveSync from the supplied
CD-ROM,
1. Insert the CD-ROM into your PC.
2. Follow the on screen instructions to
complete the setup.
3. When installation is complete, follow
the onscreen instructions in the
Synchronisation Setup Wizard to
connect your device to the PC and
create a data sharing partnership.
Connect your device to a PC with
the PC data cable
1. From the Today screen, tap
Start
→
Settings
.
2. From the
Connections
tab, tap
USB
to PC
.
3. Connect one end of the PC data cable
to the multifunction jack on your
device and the other end to the USB
port on your PC.
You can also connect the device to a
PC via the Bluetooth wireless feature.
See “Search for and pair with a
Bluetooth-enabled device,”
X
49.
53
Connectivity
Synchronise your data
When you connect your device to a PC,
ActiveSync should begin synchronising
your data automatically. You can begin
the synchronisation manually by tapping
Sync
. To stop a synchronisation in
progress, tap
Stop
.
You can also manually find and copy files
from your device to a PC and vice versa—
from the Microsoft ActiveSync window,
tap
Explore
.
For more details on synchronising your
data, refer to the ActiveSync Help.
Configure an Exchange server
1. From the Today screen, tap
Start
→
Programs
→
ActiveSync
.
2. Tap
Menu
→
Configure Server
.
3. Enter a server address.
4. To establish a secure connection, tap
the check box next to
This server
requires an encrypted (SSL)
connection
.
5. Tap
Next
.
6. Select the types of data to
synchronise.
7. When you are finished, tap
Finish
.
Change the synchronisation
schedule
If you routinely synchronise your data via
an Exchange server, you can configure
settings for both peak and off-peak
schedules.
Connectivity
54
To change the synchornisation schedules,
1. Tap
Menu
→
Schedule
.
2. Set the following options:
•
Peak times
- set the frequency of
synchronisations during peak hours
•
Off-peak times
- set the frequency
of synchronisations during non-peak
hours
•
Use above settings when
roaming
- set to use the
synchronisation schedules even
when roaming
•
Send outgoing items immediately
- set to synchronise each time you
send an outgoing email
3. When you are finished, tap .
55
8
Troubleshooting
If you have trouble with your device, try
these procedures before you contact a
service professional.
Contacting a service center
If you have attempted the
troubleshooting solution and are still
having problems with your device, make
a note of the following information and
contact your local dealer or Samsung
after-sales service:
• Model number(s) of your device
• Serial number(s) of your device
• A clear description of the problem
When contacting Samsung, use the
contact phone numbers, web addresses,
or postal addresses for your region of
residence.
When you try to turn on your device,
the following messages may appear:
Message Try this to solve the
problem:
The SIM card
is missing. Check that the SIM card
has been correctly
installed.
Enter PIN. When using the device for
the first time or when the
PIN check feature is
enabled, you must enter
the PIN supplied with the
SIM card. To disable the
PIN check feature, tap
Start
→
Settings
→
Personal
tab
→
Phone
→
Phone
tab, and then clear
the
Require PIN when
phone is used
check
box.
Troubleshooting
56
Your device does not show a signal
(no bars next to the network icon).
• If you just turned on the device, wait
about 2 minutes for your device to find
the network and receive a signal.
• You may not be able to receive a signal
in tunnels or elevators. Move to an
open area.
• You may be between service areas. You
should receive a signal when you enter
a service area.
You forgot a security, PIN, or PUK
code.
If you forget or lose this or another code,
contact the seller or your service
provider.
Your display shows white lines.
The display may show white lines if you
have turned the device on after a long
period of disuse or if you removed the
battery without first turning off the
device. The display should correct itself in
a short time.
You enter a number, but the call is
not dialled.
• Ensure that you have pressed [ ].
• Ensure that you have accessed the
right cellular network.
• Ensure that you have not set call
barring for the phone number.
SIM card
blocked. Your SIM card is blocked,
usually as a result of
entering your PIN
incorrectly several times.
You must enter the PUK
supplied by your service
provider.
Message Try this to solve the
problem:
57
Troubleshooting
Another caller cannot hear you
speaking.
• Ensure that you are not blocking the
built-in microphone.
• Move the built-in microphone closer to
your mouth.
• If using a headset, ensure that it is
properly connected.
The sound quality of a call is poor.
• Ensure that you are not blocking
internal antenna on top of the device.
• When you are in areas with weak
signals, you may lose reception. Move
to another area and try again.
The battery does not charge properly
or sometimes your device turns itself
off while charging.
• Disconnect the device from the
charger, remove and reinstall the
battery, and try charging again.
• The battery terminals may be dirty.
Wipe both gold-coloured contacts with
a clean, soft cloth and try charging the
battery again.
• If the battery no longer charges
completely, dispose of the old battery
properly and replace it with a new
battery.
Your device is hot to the touch.
When you use several applications at
once, your device requires more power
and may heat up. This is normal and
should not affect your device’s lifespan or
performance.
Troubleshooting
58
Your device cannot connect to the
internet.
• Ensure that you have entered valid
settings for your internet service
provider.
• Ensure that you have activated the
wireless connection to your mobile
service provider and that the signal is
not obstructed.
• Ensure that you have entered the
correct user name and password.
You cannot find and pair with
another Bluetooth-enabled device.
• Ensure that both devices have
activated the Bluetooth feature.
• Ensure that the distance between the
devices is not more than 10 metres
and that they are not separated by
walls or other obstacles.
• Ensure that the settings for each
device allow them to be visible to other
devices.
• Ensure that both devices are
compatible with Bluetooth wireless
technology.
• Ensure that the correct passcode has
been entered on both devices.
You cannot listen to music on a
remote Bluetooth headset.
• Ensure that your device is connected to
the headset.
• Ensure that the music format you are
trying to listen to is supported by the
headset.
• Ensure that the distance between the
headset and device is not more than 10
metres and that they are not separated
by walls or other obstacles.
59
9
MICROSOFT SOFTWARE LICENSE TERMS FOR
WINDOWS MOBILE 6 SOFTWARE Agreement
These license terms are an agreement
between you and Samsung Electronics
Inc. ("Company"). Please read them.
They apply to the software included on
this device. The software also includes
any separate media on which you
received the software.
The software on this device includes
software licensed by Company from
Microsoft Corporation or its affiliate.
The terms also apply to any
•updates,
•supplements,
• Internet-based services, and
• support services
for this software, unless other terms
accompany those items. If so, those
terms apply.
As described below, using some
features also operates as your
consent to the transmission of
certain standard computer
information for Internet-based
services.
By using the software, including use
on this device, you accept these
terms. If you do not accept them, do
not use the device or software.
Instead, contact Company to
determine its return policy for a
refund or credit.
WARNING
: If the software contains
voice operated technologies, then
operating this software requires user
attention. Diverting attention away from
the road while driving can possibly cause
an accident or other serious
consequence.
MICROSOFT SOFTWARE LICENSE TERMS FOR WINDOWS MOBILE 6 SOFTWARE Agreement
60
Even occasional, short diversions of
attention can be dangerous if your
attention is diverted away from your
driving task at a critical time. Company
and Microsoft make no representations,
warranties or other determinations that
ANY use of this software is legal, safe, or
in any manner recommended or intended
while driving or otherwise operating a
motor vehicle.
If you comply with these license
terms, you have the rights below.
1.
USE RIGHTS.
You may use the software on the device
with which you acquired the software.
2.
ADDITIONAL LICENSING
REQUIREMENTS AND/OR USE
RIGHTS.
a.
Specific Use.
Company designed
this device for a specific use. You
may only use the software for that
use.
b.
Included Microsoft Programs
and Additional Required
Licenses.
Except as provided
below, these license terms apply to
all Microsoft programs included with
the software. If the license terms
with any of those programs give you
other rights that do not expressly
conflict with these license terms,
you also have those rights.
i. This agreement does not grant
you any rights with respect to the
Windows Mobile Device Center,
Microsoft ActiveSync or Microsoft
Outlook 2007 Trial which are
subject to the licenses
accompanying those items.
c.
Speech Recognition.
If the
software includes speech
recognition component(s), you
understand that speech recognition
is an inherently statistical process
and that recognition errors are
61
MICROSOFT SOFTWARE LICENSE TERMS FOR WINDOWS MOBILE 6 SOFTWARE Agreement
inherent in the process. Neither
Company nor Microsoft or their
suppliers shall be liable for any
damages arising out of errors in the
speech recognition process.
d.
Phone Functionality.
If the device
software includes phone
functionality, all or certain portions
of the device software may be
inoperable if you do not have and
maintain a service account with a
wireless telecommunication carrier
("Mobile Operator"), or if the Mobile
Operator's network is not operating
or configured to operate with the
device.
3.
SCOPE OF LICENSE.
The software is
licensed, not sold. This agreement
only gives you some rights to use the
software. Company and Microsoft
reserve all other rights. Unless
applicable law gives you more rights
despite this limitation, you may use
the software only as expressly
permitted in this agreement. In doing
so, you must comply with any
technical limitations in the software
that allow you to use it only in certain
ways. You may not:
• work around any technical limitations
in the software;
• reverse engineer, decompile or
disassemble the software;
• make more copies of the software
than specified in this agreement;
• publish the software for others to
copy;
• rent, lease or lend the software; or
• use the software for commercial
software hosting services.
MICROSOFT SOFTWARE LICENSE TERMS FOR WINDOWS MOBILE 6 SOFTWARE Agreement
62
Except as expressly provided in this
agreement, rights to access the
software on this device do not give you
any right to implement Microsoft
patents or other Microsoft intellectual
property in software or devices that
access this device.
You may use remote access
technologies in the software such as
Remote Desktop Mobile to access the
software remotely from a computer or
server. You are responsible for
obtaining any licenses required for use
of the protocols to access other
software.
4.
INTERNET-BASED SERVICES.
Microsoft provides Internet-based
services with the software. Microsoft
may change or cancel them at any
time.
a.
Consent for Internet-Based
Services.
The software features
described below connect to
Microsoft or service provider
computer systems over the
Internet. In some cases, you will
not receive a separate notice when
they connect. You may switch off
some of these features or not use
them. For more information about
these features, visit http://
go.microsoft.com/fwlink/
?LinkId=81931.
By using these features, you
consent to the transmission of this
information.
Microsoft does not use
the information to identify or contact
you.
Device Information. The following
features use Internet protocols, which
send to the appropriate systems
device information, such as your
Internet protocol address, the type of
63
MICROSOFT SOFTWARE LICENSE TERMS FOR WINDOWS MOBILE 6 SOFTWARE Agreement
operating system, browser and name
and version of the software you are
using, and the language code of the
device where you installed the
software. Microsoft uses this
information to make the Internet-
based services available to you.
•
Windows Mobile Update
Feature.
The Windows Mobile
Update feature provides you the
ability to obtain and install
software updates on your device if
updates are available. You may
choose not to use this feature.
Company and/or your Mobile
Operator may not support this
feature or an update for your
device.
•
Windows Media Digital Rights
Management.
Content owners
use Windows Media digital rights
management technology
(WMDRM) to protect their
intellectual property, including
copyrights. This software and
third party software use WMDRM
to play and copy WMDRM-
protected content. If the software
fails to protect the content,
content owners may ask Microsoft
to revoke the software's ability to
use WMDRM to play or copy
protected content. Revocation
does not affect other content.
When you download licenses for
protected content, you agree that
Microsoft may include a revocation
list with the licenses. Content
owners may require you to
upgrade WMDRM to access their
content. Microsoft software that
includes WMDRM will ask for your
consent prior to the upgrade. If
you decline an upgrade, you will
not be able to access content that
requires the upgrade.
MICROSOFT SOFTWARE LICENSE TERMS FOR WINDOWS MOBILE 6 SOFTWARE Agreement
64
b.
Misuse of Internet-based
Services.
You may not use these
services in any way that could harm
them or impair anyone else's use of
them. You may not use the services
to try to gain unauthorized access to
any service, data, account or
network by any means.
5.
NOTICES ABOUT THE MPEG-4
VISUAL STANDARD.
The software
may include MPEG-4 visual decoding
technology. This technology is a format
for data compression of video
information. MPEG LA, L.L.C. requires
this notice:
USE OF THIS PRODUCT IN ANY
MANNER THAT COMPLIES WITH THE
MPEG 4 VISUAL STANDARD IS
PROHIBITED, EXCEPT FOR USE
DIRECTLY RELATED TO (A) DATA OR
INFORMATION (i) GENERATED BY AND
OBTAINED WITHOUT CHARGE FROM A
CONSUMER NOT THEREBY ENGAGED
IN A BUSINESS ENTERPRISE, AND (ii)
FOR PERSONAL USE ONLY; AND (B)
OTHER USES SPECIFICALLY AND
SEPARATELY LICENSED BY MPEG LA,
L.L.C.
If you have questions about the MPEG-
4 visual standard, please contact
MPEG LA, L.L.C., 250 Steele Street,
Suite 300, Denver, CO 80206;
www.mpegla.com.
6.
DIGITAL CERTIFICATES.
The
software uses digital certificates in
X.509 format. These digital certificates
are used for authentication.
7.
CONNECTIVITY SOFTWARE.
Your
device package may include Windows
Mobile Device Center or Microsoft
ActiveSync software. If it is included,
then you may install and use it in
accordance with the license terms that
65
MICROSOFT SOFTWARE LICENSE TERMS FOR WINDOWS MOBILE 6 SOFTWARE Agreement
are provided with it. If no license
terms are provided, then you may
install and use only one (1) copy of the
software on a single computer.
8.
NETWORK ACCESS.
If you are using
a network, such as an employer
network, the network administrator
may limit features or functionality on
your device.
9.
PRODUCT SUPPORT.
Contact
Company for support options. Refer to
the support number provided with the
device.
10.
LINKS TO THIRD PARTY
WEBSITES.
If the software provides
links to third party websites, those
links are provided to you only as a
convenience, and the inclusion of any
link does not imply an endorsement of
the third party website by Microsoft.
11.
BACKUP COPY.
You may make one
backup copy of the software. You may
use it only to reinstall the software on
the device.
12.
PROOF OF LICENSE.
If you
acquired the software on the device, or
on a disc or other media, a genuine
Certificate of Authenticity label with a
genuine copy of the software identifies
licensed software. To be valid, this
label must be affixed to the device, or
included on or in Company's software
packaging. If you receive the label
separately, it is not valid. You should
keep the label on the device or
packaging to prove that you are
licensed to use the software. To
identify genuine Microsoft software,
see http://www.howtotell.com.
MICROSOFT SOFTWARE LICENSE TERMS FOR WINDOWS MOBILE 6 SOFTWARE Agreement
66
13.
TRANSFER TO A THIRD PARTY.
You may transfer the software only
with the device, the Certificate of
Authenticity label, and these license
terms directly to a third party. Before
the transfer, that party must agree
that these license terms apply to the
transfer and use of the software. You
may not retain any copies of the
software including the backup copy.
14.
NOT FAULT TOLERANT.
The
software is not fault tolerant.
Company installed the software on the
device and is responsible for how it
operates on the device.
15.
RESTRICTED USE.
The Microsoft
software was designed for systems
that do not require fail-safe
performance. You may not use the
Microsoft software in any device or
system in which a malfunction of the
software would result in foreseeable
risk of injury or death to any person.
This includes operation of nuclear
facilities, aircraft navigation or
communication systems and air traffic
control.
16.
NO WARRANTIES FOR THE
SOFTWARE.
The software is provided
"as is". You bear all risks of using it.
Microsoft gives no express warranties,
guarantees or conditions. Any
warranties you receive regarding the
device or the software do not originate
from, and are not binding on, Microsoft
or its affiliates. When allowed by your
local laws, Company and Microsoft
exclude implied warranties of
merchantability, fitness for a particular
purpose and non-infringement.
67
MICROSOFT SOFTWARE LICENSE TERMS FOR WINDOWS MOBILE 6 SOFTWARE Agreement
17.
LIABILITY LIMITATIONS.
You can
recover from Microsoft and its affiliates
only direct damages up to fifty U.S.
Dollars (U.S. $50.00), or equivalent in
local currency. You cannot recover any
other damages, including
consequential, lost profits, special,
indirect or incidental damages.
This limitation applies to:
• anything related to the software,
services, content (including code) on
third party internet sites, or third
party programs, and
• claims for breach of contract, breach
of warranty, guarantee or condition,
strict liability, negligence, or other
tort to the extent permitted by
applicable law.
It also applies even if Microsoft should
have been aware of the possibility of
the damages. The above limitation
may not apply to you because your
country may not allow the exclusion or
limitation of incidental, consequential
or other damages.
18.
EXPORT RESTRICTIONS.
The
software is subject to United States
export laws and regulations. You must
comply with all domestic and
international export laws and
regulations that apply to the software.
These laws include restrictions on
destinations, end users and end use.
For additional information, see
www.microsoft.com/exporting.
68
Health and safety information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and
receiver. It is designed and manufactured not to
exceed the exposure limits for radio frequency (RF)
energy set by the Federal Communications
Commission (FCC) of the U.S. government. These
FCC exposure limits are derived from the
recommendations of two expert organizations, the
National Counsel on Radiation Protection and
Measurement (NCRP) and the Institute of Electrical
and Electronics Engineers (IEEE). In both cases, the
recommendations were developed by scientific and
engineering experts drawn from industry,
government, and academia after extensive reviews
of the scientific literature related to the biological
effects of RF energy.
The exposure limit set by the FCC for wireless
mobile phones employs a unit of measurement
known as the Specific Absorption Rate (SAR). The
SAR is a measure of the rate of absorption of RF
energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires
wireless phones to comply with a safety limit of 1.6
watts per kilogram (1.6 W/kg). The FCC exposure
limit incorporates a substantial margin of safety to
give additional protection to the public and to
account for any variations in measurements.
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power
levels so as to use only the power required to reach
the network. In general, the closer you are to a
wireless base station antenna, the lower the power
output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC
that it does not exceed the exposure limit
established by the FCC. Tests for each model phone
are performed in positions and locations (e.g. at the
ear and worn on the body) as required by the FCC.
The highest SAR values for this model phone as
reported to the FCC are: GSM1900 Head: 0.66 W/
Kg, Body-worn: 0.728 W/Kg; GSM800 Head:
0.525W/Kg, Body-worn: 1.27 W/Kg.
For body worn operation, this model phone has been
tested and meets the FCC RF exposure guidelines
whenused with a Samsung accessory designated for
this product or when used with an accessory that
contains no metal and that positions the handset a
minimum of 1.5 cm from the body.
Non-compliance with the above restrictions may
result in violation of FCC RF exposure guidelines.
69
SAR information on this and other model phones can
be viewed on-line at www.fcc.gov/oet/fccid. This site
uses the phone FCC ID number, A3LSGHI728.
Sometimes it may be necessary to remove the
battery pack to find the number. Once you have the
FCC ID number for a particular phone, follow the
instructions on the website and it should provide
values for typical or maximum SAR for a particular
phone. Additional product specific SAR information
can also be obtained at www.fcc.gov/cgb/sar.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
from wireless phones. The FDA publication includes
the following information:
What kinds of phones are the subject of this
update?
The term wireless phone refers here to hand-held
wireless phones with built-in antennas, often called
“cell,” “mobile,” or “PCS” phones. These types of
wireless phones can expose the user to measurable
radio frequency energy (RF) because of the short
distance between the phone and the user's head.
These RF exposures are limited by Federal
Communications Commission safety guidelines that
were developed with the advice of FDA and other
federal health and safety agencies. When the phone
is located at greater distances from the user, the
exposure to RF is drastically lower because a
person's RF exposure decreases rapidly with
increasing distance from the source. The so-called
“cordless phones,” which have a base unit connected
to the telephone wiring in a house, typically operate
at far lower power levels, and thus produce RF
exposures well within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that
any health problems are associated with using
wireless phones. There is no proof, however, that
wireless phones are absolutely safe. Wireless
phones emit low levels of radio frequency energy
(RF) in the microwave range while being used. They
also emit very low levels of RF when in the stand-by
mode. Whereas high levels of RF can produce health
effects (by heating tissue), exposure to low level RF
that does not produce heating effects causes no
known adverse health effects. Many studies of low
level RF exposures have not found any biological
effects. Some studies have suggested that some
biological effects may occur, but such findings have
not been confirmed by additional research. In some
cases, other researchers have had difficulty in
reproducing those studies, or in determining the
reasons for inconsistent results.
Health and safety information
70
What is FDA's role concerning the safety of
wireless phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as
wireless phones before they can be sold, as it does
with new drugs or medical devices. However, the
agency has authority to take action if wireless
phones are shown to emit radio frequency energy
(RF) at a level that is hazardous to the user. In such
a case, FDA could require the manufacturers of
wireless phones to notify users of the health hazard
and to repair, replace or recall the phones so that
the hazard no longer exists.
Although the existing scientific data do not justify
FDA regulatory actions, FDA has urged the wireless
phone industry to take a number of steps, including
the following:
• “Support needed research into possible biological
effects of RF of the type emitted by wireless
phones;
• “Design wireless phones in a way that minimizes
any RF exposure to the user that is not
necessary for device function; and
• “Cooperate in providing users of wireless phones
with the best possible information on possible
effects of wireless phone use on human health.
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at
the federal level. The following agencies belong to
this working group:
• “National Institute for Occupational Safety and
Health
• “Environmental Protection Agency
• “Federal Communications Commission
• “Occupational Safety and Health Administration
• “National Telecommunications and Information
Administration
The National Institutes of Health participates in
some interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications
Commission (FCC). All phones that are sold in the
United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA
and other health agencies for safety questions about
wireless phones.
FCC also regulates the base stations that the
wireless phone networks rely upon. While these
base stations operate at higher power than do the
wireless phones themselves, the RF exposures that
people get from these base stations are typically
thousands of times lower than those they can get
from wireless phones. Base stations are thus not the
primary subject of the safety questions discussed in
this document.
71
What are the results of the research done
already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws
in their research methods. Animal experiments
investigating the effects of radio frequency energy
(RF) exposures characteristic of wireless phones
have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies,
however, have suggested that low levels of RF could
accelerate the development of cancer in laboratory
animals. However, many of the studies that showed
increased tumor development used animals that had
been genetically engineered or treated with cancer-
causing chemicals so as to be pre-disposed to
develop cancer in absence of RF exposure. Other
studies exposed the animals to RF for up to 22 hours
per day. These conditions are not similar to the
conditions under which people use wireless phones,
so we don't know with certainty what the results of
such studies mean for human health.
Three large epidemiology studies have been
published since December 2000. Between them, the
studies investigated any possible association
between the use of wireless phones and primary
brain cancer, glioma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland,
leukemia, or other cancers. None of the studies
demonstrated the existence of any harmful health
effects from wireless phones RF exposures.
However, none of the studies can answer questions
about long-term exposures, since the average
period of phone use in these studies was around
three years.
What research is needed to decide whether
RF exposure from wireless phones poses a
health risk?
A combination of laboratory studies and
epidemiological studies of people actually using
wireless phones would provide some of the data that
are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large
numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one
exists. Epidemiological studies can provide data that
is directly applicable to human populations, but ten
or more years' follow-up may be needed to provide
answers about some health effects, such as cancer.
This is because the interval between the time of
exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many
years. The interpretation of epidemiological studies
is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones.
Many factors affect this measurement, such as the
angle at which the phone is held, or which model of
phone is used.
What is FDA doing to find out more about the
possible health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
Health and safety information
72
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
FDA has been a leading participant in the World
Health Organization international Electromagnetic
Fields (EMF) Project since its inception in 1996. An
influential result of this work has been the
development of a detailed agenda of research needs
that has driven the establishment of new research
programs around the world. The Project has also
helped develop a series of public information
documents on EMF issues.
FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative
Research and Development Agreement (CRADA) to
do research on wireless phone safety. FDA provides
the scientific oversight, obtaining input from experts
in government, industry, and academic
organizations. CTIA-funded research is conducted
through contracts to independent investigators. The
initial research will include both laboratory studies
and studies of wireless phone users. The CRADA will
also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What steps can I take to reduce my exposure
to radio frequency energy from my wireless
phone?
If there is a risk from these products - and at this
point we do not know that there is - it is probably
very small. But if you are concerned about avoiding
even potential risks, you can take a few simple steps
to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much
exposure a person receives, reducing the amount of
time spent using a wireless phone will reduce RF
exposure.
• “If you must conduct extended conversations by
wireless phone every day, you could place more
distance between your body and the source of
the RF, since the exposure level drops off
dramatically with distance. For example, you
could use a headset and carry the wireless phone
away from your body or use a wireless phone
connected to a remote antenna.
Again, the scientific data do not demonstrate that
wireless phones are harmful. But if you are
concerned about the RF exposure from these
products, you can use measures like those described
above to reduce your RF exposure from wireless
phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to
users of wireless phones, including children and
teenagers. If you want to take steps to lower
exposure to radio frequency energy (RF), the
measures described above would apply to children
and teenagers using wireless phones. Reducing the
time of wireless phone use and increasing the
73
distance between the user and the RF source will
reduce RF exposure.
Some groups sponsored by other national
governments have advised that children be
discouraged from using wireless phones at all. For
example, the government in the United Kingdom
distributed leaflets containing such a
recommendation in December 2000. They noted
that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their
recommendation to limit wireless phone use by
children was strictly precautionary; it was not based
on scientific evidence that any health hazard exists.
Do hands-free kits for wireless phones
reduce risks from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason
to believe that hands-free kits reduce risks. Hands-
free kits can be used with wireless phones for
convenience and comfort. These systems reduce the
absorption of RF energy in the head because the
phone, which is the source of the RF emissions, will
not be placed against the head. On the other hand,
if the phone is mounted against the waist or other
part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones
marketed in the U.S. are required to meet safety
requirements regardless of whether they are used
against the head or against the body. Either
configuration should result in compliance with the
safety limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason
to believe that accessories that claim to shield the
head from those emissions reduce risks. Some
products that claim to shield the user from RF
absorption use special phone cases, while others
involve nothing more than a metallic accessory
attached to the phone. Studies have shown that
these products generally do not work as advertised.
Unlike “hand-free” kits, these so-called “shields”
may interfere with proper operation of the phone.
The phone may be forced to boost its power to
compensate, leading to an increase in RF
absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold
devices that claimed to protect wireless phone users
from radiation with making false and
unsubstantiated claims. According to FTC, these
defendants lacked a reasonable basis to substantiate
their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones
can interact with some electronic devices. For this
reason, FDA helped develop a detailed test method
to measure electromagnetic interference (EMI) of
Health and safety information
74
implanted cardiac pacemakers and defibrillators
from wireless telephones. This test method is now
part of a standard sponsored by the Association for
the Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by FDA,
medical device manufacturers, and many other
groups, was completed in late 2000. This standard
will allow manufacturers to ensure that cardiac
pacemakers and defibrillators are safe from wireless
phone EMI. FDA has tested wireless phones and
helped develop a voluntary standard sponsored by
the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and
performance requirements for hearing aids and
wireless phones so that no interference occurs when
a person uses a compatible phone and a compatible
hearing aid at the same time. This standard was
approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones
for possible interactions with other medical devices.
Should harmful interference be found to occur, FDA
will conduct testing to assess the interference and
work to resolve the problem.
Additional information on the safety of RF exposures
from various sources can be obtained from the
following organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's
(OSHA):
http://www.osha.gov/SLTC/
radiofrequencyradiation/index.html
• National institute for Occupational Safety and
Health (NIOSH):
http://www.cdc.gov/niosh/emfpg.html
• World health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing
Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.nrpb.org.uk
• Updated 4/3/2002: US food and Drug
Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime.
But an important responsibility accompanies the
benefits of wireless phones, one that every user
must uphold.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, practice good common
sense and remember the following tips:
75
1. Get to know your wireless phone and its
features, such as speed dial and redial. If
available, these features help you to place your
call without taking your attention off the road.
2. When available, use a hands-free device. If
possible, add an additional layer of convenience
and safety to your wireless phone with one of the
many hands free accessories available today.
3. Position your wireless phone within easy reach.
Be able to access your wireless phone without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your
voice mail answer it for you.
4. Let the person you are speaking with know you
are driving; if necessary, suspend the call in
heavy traffic or hazardous weather conditions.
Rain, sleet, snow, ice and even heavy traffic can
be hazardous.
5. Do not take notes or look up phone numbers
while driving. Jotting down a “to do” list or
flipping through your address book takes
attention away from your primary responsibility,
driving safely.
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car
will be stationary. If you need to make a call
while moving, dial only a few numbers, check the
road and your mirrors, then continue.
7. Do not engage in stressful or emotional
conversations that may be distracting. Make
people you are talking with aware you are
driving and suspend conversations that have the
potential to divert your attention from the road.
8. Use your wireless phone to call for help. Dial 9-1-
1 or other local emergency number in the case of
fire, traffic accident or medical emergencies.
Remember, it is a free call on your wireless
phone!
9. Use your wireless phone to help others in
emergencies. If you see an auto accident, crime
in progress or other serious emergency where
lives are in danger, call 9-1-1 or other local
emergency number, as you would want others to
do for you.
10.Call roadside assistance or a special non-
emergency wireless assistance number when
necessary. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal,
a minor traffic accident where no one appears
injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-
emergency number.
“The wireless industry reminds you to use your
phone safely when driving.”
For more information, please call 1-888-901-SAFE,
or visit our web-site www.wow-com.com Provided
by the Cellular Telecommunications & Internet
Association
Health and safety information
76
Operating Environment
Remember to follow any special regulations in force
in any area and always switch your phone off
whenever it is forbidden to use it, or when it may
cause interference or danger. When connecting the
phone or any accessory to another device, read its
user's guide for detailed safety instructions. Do not
connect incompatible products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
Using Your Phone Near Other Electronic
Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker.
These recommendations are consistent with the
independent research and recommendations of
Wireless Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone
is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to
minimize potential interference.
If you have any reason to suspect that interference
is taking place, switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you
in obtaining this information. Switch your phone off
in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
77
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should
also consult the manufacturer of any equipment that
has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted
notices require you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded
of the need to observe restrictions on the use of
radio equipment in fuel depots (fuel storage and
distribution areas), chemical plants or where
blasting operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical emergencies,
for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 911 or other official
emergency number). Emergency numbers vary
by location.
3. Press [ ].
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular service
provider.
Health and safety information
78
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not cut off the call until given
permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be
allowed to play with it because they could hurt
themselves and others, damage the phone or make
calls that increase your phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if
used in close proximity to receiving equipment. The
FCC can require you to stop using the phone if such
interference cannot be eliminated.
Vehicles using liquefied petroleum gas (such as
propane or butane) must comply with the National
Fire Protection Standard (NFPA-58). For a copy of
this standard, contact the National Fire Protection
Association, One Battery march Park, Quincy, MA
02269, Attn: Publication Sales Division.
• This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
• This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment
and receiver.
-Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV
technician for help.
79
Cautions
Changes or modifications made in the radio phone, not
expressly approved by Samsung, will void the user’s
authority to operate the equipment.
Only use approved batteries, antennas and
chargers. The use of any unauthorized accessories
may be dangerous and void the phone warranty if
said accessories cause damage or a defect to the
phone.
Although your phone is quite sturdy, it is a complex
piece of equipment and can be broken. Avoid
dropping, hitting, bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the
phone or install the phone in a vehicle. Faulty
installation or service may be dangerous and
may invalidate any warranty applicable to the
device.
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag
or in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
• Switch your phone off before boarding an
aircraft. The use of wireless phone in aircraft is
illegal and may be dangerous to the aircraft's
operation.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
Product Performance
Getting the Most Out of Your Signal
Reception
The quality of each call you make or receive depends
on the signal strength in your area. Your phone
informs you of the current signal strength by
displaying a number of bars next to the signal
strength icon. The more bars displayed, the stronger
the signal.
If you're inside a building, being near a window may
give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15
minutes of searching, a Power Save feature is
automatically activated. If your phone is active, it
periodically rechecks service availability or you can
check it yourself by pressing any key.
Health and safety information
80
Anytime the Power Save feature is activated, a
message displays on the screen. When a signal is
found, your phone returns to standby mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and
accessories. Faulty service may void the warranty.
There are several simple guidelines to operating
your phone properly and maintaining safe,
satisfactory service.
• Hold the phone with the antenna raised, fully-
extended and over your shoulder.
• Try not to hold, bend or twist the phone's
antenna.
• Don't use the phone if the antenna is damaged.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to
rain or liquid spills. If your phone does get wet,
immediately turn the power off and remove the
battery. If it is inoperable, call Customer Care for
service.
Availability of Various Features/Ring
Tones
Many services and features are network dependent
and may require additional subscription and/or
usage charges. Not all features are available for
purchase or use in all areas. Downloadable Ring
Tones may be available at an additional cost. Other
conditions and restrictions may apply. See your
service provider for additional information.
Battery Standby and Talk Time
Standby and talk times will vary depending on
phone usage patterns and conditions. Battery power
consumption depends on factors such as network
configuration, signal strength, operating
temperature, features selected, frequency of calls,
and voice, data, and other application usage
patterns.
Battery Precautions
• Never use any charger or battery that is
damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
81
• Battery charging time depends on the remaining
battery charge and the type of battery and
charger used. The battery can be charged and
discharged hundreds of times, but it will
gradually wear out. When the operation time
(talk time and standby time) is noticeably
shorter than normal, it is time to buy a new
battery.
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-
approved chargers. When a charger is not in use,
disconnect it from the power source. Do not
leave the battery connected to a charger for
more than a week, since overcharging may
shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling
or warming first.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and lifetime of
the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold
battery may temporarily not work, even when
the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below 0 °C
(32 °F).
• Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and - terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
• Dispose of used batteries in accordance with
local regulations. In some areas, the disposal of
batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion
batteries, contact your nearest Samsung
authorized service center. Always recycle. Do not
dispose of batteries in a fire.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Keep the phone and all its parts and accessories
out of the reach of small children.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode
electronic circuits.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
Health and safety information
82
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone's
electronic circuit boards.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
• Do not paint the phone. Paint can clog the
device's moving parts and prevent proper
operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
• When the phone or battery gets wet, the label
indicating water damage inside the phone
changes color. In this case, phone repairs are no
longer guaranteed by the manufacturer's
warranty, even if the warranty for your phone
has not expired.
• If your phone has a flash or light, do not use it
too close to the eyes of people or animals. This
may cause damage to their eyes.
• Use only the supplied or an approved
replacement antenna. Unauthorized antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
•