Samsung Electronics Co SGHP300 Single-Band PCS GSM Phone with Bluetooth User Manual C mySingle Temp SGH P300 FCC

Samsung Electronics Co Ltd Single-Band PCS GSM Phone with Bluetooth C mySingle Temp SGH P300 FCC

UserManual.wiki >

Samsung Electronics Co >

SGHP300 User Manual

Users Manual

World Wide Webhttp://www.samsungmobile.comPrinted in KoreaCode No.:GH68-08316AEnglish. 09/2005. Rev. 1.0* Depending on the software installed or your service provider or country, some of the descriptions in this guide may not match your phone exactly.* Depending on your country, your phone and accessories may appear different from the illustrations in this guide.

SGH-P300User’s GuideDraft 2005. 10. 4(Version:P300XXEJ1)

ImportantsafetyprecautionsFailure to comply with the following precautions may be dangerous or illegal.Drive safely at all timesDo not use a hand-held phone while driving. Park the vehicle first. Switch off the phone when refuellingDo not use the phone at a refuelling point (service station) or near fuels or chemicals.Switch off in an aircraftWireless phones can cause interference. Using them in an aircraft is both illegal and dangerous.Switch off the phone near all medical equipmentHospitals or health care facilities may be using equipment that could be sensitive to external radio frequency energy. Follow any regulations or rules in force.

Important safety precautions1InterferenceAll wireless phones may be subject to interference, which could affect their performance.Be aware of special regulationsMeet any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger.Water resistanceYour phone is not water-resistant. Keep it dry. Sensible useUse only in the normal position (held to the ear). Avoid unnecessary contact with the antenna when the phone is switched on.Emergency callsKey in the emergency number for your present location, then press . Keep your phone away from small children Keep the phone and all its parts, including accessories, out of the reach of small children.Accessories and batteriesUse only Samsung-approved accessories and batteries. Use of any unauthorised accessories could damage your phone and may be dangerous.Qualified serviceOnly qualified service personnel may repair your phone.For more detailed safety information, see "Health and safety information" on page 83.• The phone could explode if the battery is replaced with an incorrect type.• Dispose of used batteries according to the manufacturer’s instructions.

2About this GuideThis User’s Guide provides you with condensed information about how to use your phone. To quickly learn the basics for your phone, please refer to “Get started” and “Step outside the phone.”In this guide, the following instruction icons appear:Indicates that you need to pay careful attention to the subsequent information regarding safety or phone features.Indicates that you can get more information on the referenced page. →Indicates that you need to press the Navigation keys to scroll to the specified option and then select it.[ ]Indicates a key on the phone. For example, [].< >Indicates a soft key, whose function is displayed on the phone screen. For example, <Menu>• Camera and camcorderUse the camera module on your phone to take a photo or record a video.Special features of your phone•MP3 playerPlay MP3 music files using your phone as an MP3 player.•BluetoothTransfer media files and personal data and connect to other devices using free, wireless Bluetooth technology.

4ContentsUnpack 6Make sure you have each itemYour phone 6Buttons, features, and locationsGet started 7First steps to operating your phoneInstall and charge the phone..................................... 7Power on or off........................................................ 8Keys and display ..................................................... 9Access menu functions ............................................ 11Customise your phone............................................. 12Make/Answer calls .................................................. 14Use the leather case................................................ 14Step outside the phone 15Begin with your camera, MP3 player, web, and other special featuresUse camera............................................................ 15Play MP3s.............................................................. 16Browse the web...................................................... 17Use Phonebook ...................................................... 18Send messages...................................................... 19View messages....................................................... 21Use Bluetooth ........................................................ 22Enter text 23AB, T9, Number, and Symbol modeCall functions 25Advanced calling featuresMenu functions 29All menu options listedSolve problems 81Help and personal needsHealth and safety information 83Index 90

5Overview of menu functionsTo access Menu mode, press <Menu> in Idle mode.1 Call recordsp.291 Current contacts2 Missed calls3 Dialled calls4 Received calls5 Delete all6 Call time7 Call cost*p.29p.30p.30p.30p.30p.30p.312 Phonebookp.311 Contact list2 Add new contact3 Group4 Speed dial5 My namecard6 Own number7 Management8 Service number*p.31p.32p.33p.33p.34p.34p.35p.353 Applicationsp.351 Java world2 MP3 player3 Voice recorder4 World time5 Alarm6 PIM sync7 Calculator 8 Converter 9 Timer0 Stopwatch SIM AT*p.35p.36p.38p.39p.39p.40p.41p.41p.42p.42p.424 Browserp.431 Home2 Bookmarks3 http://4 WAP profile5 Clear cachep.43p.44p.44p.44p.445 Messagesp.451 Create message2 My messages3 Templates4 Delete all5 Settings6 Memory statusp.45p.47p.52p.52p.52p.576 File managerp.571 Images2 Videos3 Music4 Sounds5 Other files6 Memory statusp.57p.58p.59p.59p.60p.607 Calendarp.608 Camerap.649 Settingsp.691 Time & Date2 Phone settings3 Display settings4 Sound settings5 Network services6 Bluetooth7 Security8 Connection settings9 Reset settingsp.69p.70p.71p.72p.73p.76p.78p.79p.81* Shows only if supported by your SIM card.

6UnpackMake sure you have each itemYou can obtain various accessories from your local Samsung dealer. Phone Travel adapter Leather case Battery User’s guideThe items supplied with your phone and the accessories at your Samsung dealer may vary, depending on your country or service provider.Your phoneButtons, features, and locationsSpecialfunction keysCamerakeyEarpieceDisplayCorrect keyCameralensFlashAlphanumeric keysNavigation keys (Up/Down/Left/Right)Web access/Confirm keyRight soft keyPower on/off/Menu exit keyMP3 keyHeadsetjackLeft soft keyVolume keysMicrophoneDial key

7Get startedFirst steps to operating your phoneSIM card informationWhen you subscribe to a cellular network, you receive a plug-in SIM (Subscriber Identity Module) card loaded with your subscription details, such as your PIN, and available optional services.Install and charge the phone Remove the battery cover.If the phone is already on, first turn it off by holding []. Insert the SIM card.Make sure that the gold-coloured contacts on the card face down into the phone. Install the battery. Replace the cover.Lock the cover. Plug the travel adapter into the phone.Plug the adapter into a standard AC wall outlet.

8Get startedLow battery indicatorWhen the battery is low:• a warning tone sounds,• the low battery message displays, and• the empty battery icon blinks.If the battery level becomes too low, the phone automatically turns off. Recharge your battery. Power on or offKeypad lockYou can lock the keypad to prevent accidental key presses from affecting phone operations.In Idle mode, press and hold [ ]. To unlock the keypad, press the left soft key and then [ ].You can also set the length of time that elapses before the keypad locks automatically.p. 70When the phone is completely charged (the battery icon becomes still), unplug the adapter from the power outlet.Remove the adapter from the phone.Switch onDo not turn on the phone when mobile phone use is prohibited.1. Press and hold [ ] to turn on the phone.2. If necessary, enter the PIN and press <OK>.Switch offPress and hold [ ].

9Get startedKeys and displayKeysPerform the function indicated on the bottom line of the display.In Idle mode, access your favourite menus directly.p. 70In Menu mode, scroll through menu options.In Idle mode, launch the web browser.In Menu mode, select the highlighted menu option or confirm input.Delete characters from the display.Make or answer a call.In Idle mode, retrieve the recent numbers dialled, missed, or received.End a call. Press and hold to switch the phone on or off. In Menu mode, cancel input and return the phone to Idle mode.In Idle mode, press and hold to access the MP3 player menu.Enter numbers, letters, and some special characters.In Idle mode, press and hold [1] to access your voicemail server. Press and hold [0] to enter an international call prefix.Enter special characters.In Idle mode, press and hold [ ] to activate or deactivate Quiet mode. Press and hold [ ] to enter a pause between numbers.Adjust the phone volume.In Idle mode, adjust the keypad tone volume. In Idle mode, press and hold to turn on the camera.In Camera mode, take a photo or record a video.

10Get startedDisplayLayoutIcons*Received signal strengthCall in progressOut of your service area; you cannot make or receive a callGPRS networkRoaming networkNew messageNew e-mailNew voicemail Text and graphicsdisplay messages, instructions, and information you enter.Soft key function indicatorsshow the current functions assigned to the soft keys.Menu ContactsIconsdisplay various icons.Call diverting feature activeHome Zone, if registered for the appropriate serviceOffice Zone, if registered for the appropriate serviceBluetooth feature activeConnected to hand-free kit or headsetSynchronised with PCAlarm setCall ringer set to vibrateQuiet mode (Vibration)Quiet mode (Mute)Mute mode, during a callBattery power level* Depending on your country or service provider, the icons shown on the display may vary.

11Get startedAccess menu functionsUse the soft keysThe roles of the soft keys vary depending on the function you are using. The bottom line of the display indicates their current role.Press the left soft key to select the highlighted option.Press the right soft key to return to the previous menu level.Select BackSelect an option1. Press the appropriate soft key.2. Press the Navigation keys to move to the next or previous option.3. Press <Select>, <OK>, or [ ] to confirm the function displayed or option highlighted.4. To exit, choose either of the following methods.•Press <Back> to move up one level.• Press [ ] to return to Idle mode.Use shortcutsPress the number key corresponding to the option you want.

12Get startedCustomise your phone1. In Idle mode, press <Menu> and select Settings → Phone settings → Language.2. Select a language.1. In Idle mode, press <Menu> and select Settings → Sound settings → Incoming call → Ringtone.2. Select an image category.3. Select an image.4. Press <Save>.Display languageCall ringer melodyYou can set wallpaper for the idle screen on the display.1. In Idle mode, press <Menu> and select Settings → Display settings → Wallpaper → Wallpaper image.2. Select an image category.3. Select an image.4. Press <Select>.5. Press <Save>.You can change the colour for the display components, such as title bars and highlight bars.1. In Idle mode, press <Menu> and select Settings → Display settings → Skin.2. Select a colour pattern.Idle mode wallpaperMenu mode skin colour

13Get startedYou can set the Navigation keys as shortcuts to access your favourite menus.1. In Idle mode, press <Menu> and select Settings → Phone settings → Short cut.2. Select a key.3. Select a menu to be assigned to the key.You can switch the phone to Quiet mode to avoid disturbing other people.Press and hold [ ] in Idle mode.Menu shortcutsQuiet modeYou can protect the phone against unauthorised use with a phone password. The phone will require the password on power-up.1. In Idle mode, press <Menu> and select Settings → Security → Change password.2. Enter the default password, 00000000, and press <OK>.3. Enter a new 4- to 8-digit password and press <OK>.4. Enter the new password again and press <OK>.5. Select Phone lock.6. Select Enable.7. Enter the password and press <OK>.Phone lock

14Get startedMake/Answer calls Use the leather caseThe portable leather case, specially designed for your phone, has an internal battery so that you don’t need to carry an extra battery. When you charge the phone with the leather case, you can charge both batteries at once.1. In Idle mode, enter an area code and phone number.2. Press [ ].3. To end the call, press [ ].1. When the phone is ringing, press [ ].2. To end the call, press [ ].Press [ / ].Make a callAnswer a callAdjust the volume during a callSlide the phone down into place and fasten the lock.Insert the phone

15Step outside the phoneBegin with your camera, MP3 player, web, and other special featuresUse cameraLoosen the lock and slide the phone up.Remove the phone1. In Idle mode, press and hold [] to turn on the camera.2. Adjust the image to be captured.3. Press [ ] to take a photo. The photo is saved automatically.4.Press <Preview> to take another photo.1. In Idle mode, press <Menu> and select File manager → Images → Photos.2. Select the photo you want.Take a photoView a photo

16Step outside the phonePlay MP3s1. In Idle mode, press and hold [ ] to turn on the camera.2. Press [1] to switch to Record mode.3. Press [ ] to start recording.4. Press [ ] to stop recording. The video is saved automatically.5. Press <Preview> to record another video.1.In Idle mode, press <Menu> and select File manager → Videos → Video clips.2. Select the video you want.Record a videoPlay a videoUse these methods:• Download from the wireless webp. 43• Download from a computer using the optional Samsung PC StudioSamsung PC Studio User’s Guide• Receive via Bluetoothp. 761. In Idle mode, press and hold [].2. Press <Options> and select Add to playlist → Add all or Add files.3. For Add files, press [ ] to select the files you want and press <Select>.4. Press <Back> to return to the MP3 player screen.Copy MP3 files to the phoneCreate a play list

17Step outside the phoneBrowse the webUsing a built-in web browser, you can get easy access to the wireless web to get a variety of up-to-date services and information and to enjoy downloads of web content.1. From the MP3 player screen, press [ ].2. During playback, use the following keys:• Up: pauses or resumes playback.• Left: moves back to the previous file.• Right: skips to the next file.• / : adjusts the volume.• Down: stops playback.Play MP3 fileIn Idle mode, press [ ].• To scroll through browser items, press [Up] or [Down]. • To select an item, press <Options> and select Select.• To return to the previous page, press <Options> and select Back.• To access browser options, press <Menu>.Launch the web browserNavigate the browser

18Step outside the phoneUse PhonebookTo the phone’s memory:1. In Idle mode, enter a phone number and press <Options>.2. Select Save contact → Phone → a number type.3. Specify contact information: First name, Last name, Mobile, Home, Office, Fax, Other, Email, Caller ID, Ringtone, Group, and Memo.4. Press <Save> to save the entry.Add an entryTo the SIM card:1. In Idle mode, enter a phone number and press <Options>.2. Select Save contact → SIM.3. Enter a name.4. Press <Save> to save the entry.1. In Idle mode, press <Contacts>.2. Select an entry.3. Scroll to a number and press [] to dial, or press [ ] to edit contact information.Find an entry

19Step outside the phoneSend messages1. In Idle mode, press <Menu> and select Phonebook → My namecard.2. Specify your contact information.3. Press <Save> to save the name card.4. To send the name card to other people, press <Options> and select Send → a sending method.Create and send a name card1. In Idle mode, press <Menu> and select Messages → Create message → Text message.2. Enter the message text.3. Press <Options> and select Save and send or Send only.4. Enter destination numbers.5. Press [ ] to send the message.1. In Idle mode, press <Menu> and select Messages → Create message → Multimedia message.2. Select Subject.3. Enter the message subject and press [ ].Send a text message (SMS)Send a multimedia message (MMS)

20Step outside the phone4. Select Image and video or Sound.5. For Image and video, select Add image or Add video and add an image or a video clip.For Sound, select Add sound and add a sound clip.6. Select Message.7. Enter the message text and press [ ].8. Press <Options> and select Send.9. Enter destination numbers or addresses.10.Press [ ] to send the message.Send a multimedia message (MMS)(continued)1. In Idle mode, press <Menu> and select Messages → Create message → Email.2. Select Subject.3. Enter the e-mail subject and press [ ].4. Select Message.5. Enter the e-mail text and press [].6. Select File attached.7. Add image, video, sound, music files, or document files.8. Press <Options> and select Send.9. Enter e-mail addresses.10.Press [ ] to send the e-mail.Send an e-mail

21Step outside the phoneView messagesWhen a notification appears: 1. Press <View>. 2. Select a message from the Inbox.From the Inbox:1. In Idle mode, press <Menu> and select Messages → My messages → Inbox.2. Select an SMS message ( ).When a notification appears:1. Press <View>.2. Press <Options> and select Retrieve. 3. Select the message from the Inbox.View a text messageView a multimedia messageFrom the Inbox:1. In Idle mode, press <Menu> and select Messages → My messages → Inbox.2. Select the MMS message ( ).1. In Idle mode, press <Menu> and select Messages → My messages → Email box.2. Select an account.3. Press <Yes> to download new e-mails or headers.4. Select an e-mail or a header.5. If you selected a header, press <Options> and select Retrieve.View an e-mail

22Step outside the phoneUse BluetoothYour phone is equipped with Bluetooth technology which enables you to connect the phone wirelessly to other Bluetooth devices and exchange data with them, talk hands-free, or control the phone remotely.In Idle mode, press <Menu> and select Settings → Bluetooth → Activation → On.1. In Idle mode, press <Menu> and select Settings → Bluetooth → My devices → Search for new devices.2. Select a device.3. Enter a Bluetooth PIN code or the other device’s Bluetooth PIN code, if it has one, and press <OK>.When the owner of the other device enters the same code, pairing is complete.Turn on BluetoothSearch for and pair with a Bluetooth device1. Access an application, Phonebook, File manager, or Calendar.2. Scroll to an item.3. Press <Options> and select Send via → Bluetooth. 4. Select a device.5. If necessary, enter the Bluetooth PIN and press <OK>.To receive data via Bluetooth, your phone’s Bluetooth feature must be active.If necessary, press <Yes> to confirm the reception.Send dataReceive data

23Enter textAB, T9, Number, and Symbol modeYou can enter text for some features, such as messaging, Phonebook, or Calendar, using AB mode, T9 mode, Number mode, and Symbol mode.Changing the text input modeThe text input mode indicator appears when the cursor is in a text field. • Press and hold [ ] to switch between T9 ( ) and AB ( ) modes. Depending on your country, you may also be able to access an input mode for your specific language.• Press [ ] to change case or switch to Number () mode.• Press and hold [ ] to switch to Symbol mode.Using AB modePress the appropriate key until the character you want appears on the screen.(Creating an SMS message with uni-code encoding)Characters in order displayedKeys Upper case Lower case

24Enter textTips for using AB mode• To enter the same letter twice or to enter a different letter on the same key, wait for the cursor to move to the right automatically or press [Right]. Then, enter the next letter.• Press [ ] to insert a space.• Press the Navigation keys to move the cursor. •Press [C] to delete characters one by one. Press and hold [C] to clear the display.Using T9 modeT9 is a predictive text input mode that allows you to key in any character using single keystrokes.Entering a word in T9 mode1. Press [2] to [9] to start entering a word. Press each key once for each letter. For example, press [4], [3], [5], [5], and [6] to enter HELLO in T9 mode. T9 predicts the word that you are typing, and it may change with each key that you press.2. Enter the whole word before editing or deleting characters.3. When the word displays correctly, go to step 4. Otherwise, press [0] to display alternative word choices for the keys that you have pressed. For example, OF and ME use [6] and [3].4. Press [ ] to insert a space and enter the next word.Tips for using T9 mode• Press [1] to enter periods or apostrophes automatically.• Press [ ] to insert a space.• Press the Navigation keys to move the cursor. • Press [C] to delete characters one by one. Press and hold [C] to clear the display.Adding a new word to the T9 dictionaryThis feature may not be available for some languages.1. Enter the word that you want to add.

252. Press [0] to display alternative words for your key presses. When there are no more alternative words, Add appears on the bottom line. 3. Press <Add>.4. Enter the word you want using AB mode and press <OK>.Using Number modeNumber mode enables you to enter numbers. Press the keys corresponding to the digits you want.Using Symbol modeSymbol mode enables you to insert symbols.Call functionsAdvanced calling featuresMaking a call1. In Idle mode, enter the area code and phone number.2. Press [ ].Making an international call1. In Idle mode, press and hold [0]. The + character appears.2. Enter the country code, area code, and phone number, then press [ ].Redialling recent numbers1. In Idle mode, press [ ] to display the list of recent numbers.To Pressdisplay more symbols [Up] or [Down]. select a symbol the corresponding number key.clear the entered symbols [C]. insert the symbols <OK>.• Press [C] to clear the last digit or press and hold [C] to clear the whole display. You can move the cursor to edit an incorrect digit.• Press and hold [ ] to enter a pause between numbers.

26Call functions2. Scroll to the number you want and press [ ].Making a call from PhonebookOnce you have stored a number in Phonebook, you can dial the number by selecting it from Phonebook.p. 31You can also use the speed dial feature to assign your most frequently called numbers to specific number keys.p. 33You can quickly dial a number from the SIM card using its location number assigned when stored.1. In Idle mode, enter a location number and press [].2. Press [Left] or [Right] to scroll through other numbers.3. Press <Dial> or [ ] to dial the number you want.Ending a callPress [ ].Answering a callWhen you receive an incoming call, the phone rings and displays the incoming call image. Press <Accept> or [ ] to answer the call.Tips for answering a call• When Anykey answer is active, you can press any key, except for <Reject> or [ ].p. 71• Press <Reject> or [ ] to reject a call.• Press and hold [ / ] to reject a call or mute the ringer, depending on the Volume key setting.p. 70Viewing missed callsIf you have missed calls, the screen displays how many calls you have missed.1. Press <View>.2. If necessary, scroll through the missed calls.3. Press [ ] to dial the number you want.

Call functions 27Using the headsetUse the headset to make or answer calls without holding the phone. Connect the headset to the jack on the right side of the phone. The button on the headset works as listed below:Options during a callYou can access a number of functions during a call.Adjusting the volume during a callUse [ / ] to adjust the earpiece volume during a call.Press [ ] to increase the volume level and [ ] to decrease the volume level.Placing a call on hold/RetrievingPress <Hold> or <Retrieve> to place a call on hold or retrieve the call.Making a second callYou can make another call if your network supports it.1. Press <Hold> to put the call on hold.2. Make the second call in the normal way.3. Press <Swap> to switch between the calls.4. Press <Options> and select End held call to end the call on hold.5. To end the current call, press [ ].Answering a second callYou can answer an incoming call while already on the phone, if your network supports it and you have activated the call waiting feature.p. 74 1. Press [ ] to answer the call. The first call is automatically put on hold.2. Press <Swap> to switch between the calls.To Pressredial the last call and hold the button.answer a call the button.end a call the button.

28Call functions3. Press <Options> and select End held call to end the call on hold.4. To end the current call, press [ ].Using the Speakerphone featureUse your phone as a speaker phone to talk and listen with the phone a short distance away.Press [ ] to activate the Speakerphone feature. Press the key again to switch back to the earpiece.Using In-call optionsPress <Options> to access the following options during a call:•Speaker on/Normal: turn on the Speakerphone feature or switch back to Normal mode.•Menu: access the phone's menu functions.•Mute/Unmute: switch off the phone's microphone so that the other person on the phone cannot hear you, or switch it back on.•Mute keys/Send keys: switch the key tones on or off.•Send DTMF: send the DTMF (Dual tone multi-frequency) tones as a group. The DTMF tones are the tones used in phones for tone dialling, sounding when you press the number keys. This option is helpful for entering a password or an account number when you call an automated system, like a banking service.•Phonebook: access the contact list.•Join: set up a multi-party call by adding a caller on hold to a currently active call. You can include up to 5 people on a multi-party call.•Transfer: transfer the currently active call to a caller on hold. The two callers can talk to each other, but you are disconnected from the call.To communicate with answering machines or computerised telephone systems, Send keys must be selected.

29•End held call: disconnect the call currently on hold.•Select one: select one of the following options during a multi-party call:Private: have a private conversation with one multi-party call participant. The other participants can converse with each other. After the private conversation, select Join to return to the multi-party call.Remove: disconnect one multi-party call participant.Menu functionsAll menu options listedCall records (Menu 1)Use this menu to view the calls you have dialled, received, or missed, the length of your calls, and the cost of your calls, if your SIM card supports.To access this menu, press <Menu> in Idle mode and select Call records.Current contacts (Menu 1.1)This menu displays the most recent calls dialled, received, or missed. Accessing a call record1. Press [Left] or [Right] to move to another call type.2. Press [Up] or [Down] to scroll through the call list.

30Menu functions3. Press [ ] to view the details of a call, or [ ] to dial a number.Using call record optionsWhile viewing the call details, press <Options> to access the following options:•Paste: edit the number to dial or save in Phonebook.•Save contact: save the number to Phonebook.•Send message: send an SMS or MMS message to the selected number.•Delete: delete the selected call record or all records.Missed calls (Menu 1.2)This menu displays the most recent calls you did not answer.Dialled calls (Menu 1.3)This menu displays the most recent calls you have dialled.Received calls (Menu 1.4) This menu displays the most recent calls you have received. Delete all (Menu 1.5) Use this menu to delete all of the records in each call type.1. Press [ ] to select the call types to be cleared. 2. Press <Delete>. 3. Press <Yes> to confirm the deletion.Call time (Menu 1.6)This menu displays the time log for calls made and received. The actual time invoiced by your service provider will vary.•Last call time: check the length of your last call.•Total sent: check the total length of all the calls you have dialled.•Total received: check the total length of all the calls you have received.

Menu functions Phonebook (Menu 2)31To reset the call timers, press <Reset>. You need to enter the phone password.Call cost (Menu 1.7) This network feature displays the cost of calls. This menu is available only if supported by your SIM card. Note that this is not intended to be used for billing purposes.•Last call cost: check the cost of your last call.•Total cost: check the total cost of all of your calls. If the total cost exceeds the maximum cost set in Set max cost, you must reset the counter before you can make another call.•Max cost: check the maximum cost limit set in Set max cost.•Reset counters: reset the cost counters.•Set max cost: set the maximum cost authorised for your calls.•Price/Unit: set the price per unit that is applied when the cost of your calls is calculated.Phonebook (Menu 2)You can store phone numbers on your SIM card and in your phone’s memory. The SIM card and phone’s memory are physically separate, but they are used as a single entity called Phonebook.To access this menu, press <Menu> in Idle mode and select Phonebook.Contact list (Menu 2.1)Use this menu to search for numbers in Phonebook.Finding an entry1. Enter the first few letters of the name that you want to find.2. Select the name from the list.3. Scroll to a number and press [ ] to dial, or press [ ] edit contact information.The password is preset to 00000000. You can change this password.p. 79

32Menu functionsUsing Phonebook optionsWhile viewing the contact details, press <Options> to access the following options:•Edit: edit contact information.•Send message: send an SMS or MMS message to the selected number, or an e-mail to the selected address.•Copy to: copy the contact to the phone’s memory or the SIM card.•Send via: send the contact via SMS, MMS, e-mail, or Bluetooth. •Delete: delete the selected contact.Add new contact (Menu 2.2)Use this menu to add a new contact to Phonebook.Storing a number in the phone’s memory1. Select Phone.2. Change the settings or enter information about the contact.•First name/Last name: assign a name.•Mobile/Home/Office/Fax/Other: add a number in any category.•Email: assign an e-mail address.•Caller ID: assign an image to alert you to a call from the person.•Ringtone: assign a ringtone to alert you to a call from the person.•Group: assign the number to a caller group.•Memo: add a memo about the person.3. Press <Save> to save the contact.Storing a number on the SIM card1. Select SIM.2. Enter information about the contact.•Name: assign a name.•Phone number: add a number.•Location: assign a location number.3. Press <Save> to save the contact.If you assign a caller ID image, ringtone, or group, the contact must be saved to the phone’s memory.

Menu functions Phonebook (Menu 2)33Group (Menu 2.3)Use this menu to organise your contacts in caller groups.Creating a new caller group1. Press <Options> and select Add.2. Enter a name for the group.3. Select the caller ID line and set an image.4. Select the ringtone line and set a melody.5. Press <Save> to save the group.Adding members to a caller group1. Select a group.2. Press <Add>.3. Press [ ] to select the contacts to be added.4. Press <Select>.Managing caller groupsWhile viewing the group list, press <Options> to access the following options:•View: display the members of the selected group.•Add: add a new group.•Edit: change the group properties.•Send message: send an SMS, MMS, or e-mail message to the group members you want.•Delete: delete the selected group or all groups. Group members, however, are not deleted from Phonebook.Speed dial (Menu 2.4)Use this menu to assign a speed dial number (2 to 9) for 8 of your most frequently called numbers.Assigning speed dial numbers1. Select a key location from 2 to 9. Key 1 is reserved for your voicemail server.2. Select a contact from the contact list.3. Select a number, if the contact has more than one number.

34Menu functionsManaging speed dial entriesFrom the Speed dial screen, press <Options> to access the following options:•Add: assign a number to an unassigned key.•View: check the name and number assigned to a key.•Change: assign a different number to a key.•Remove: clear the speed dial setting for a key.Dialling speed dial entriesPress and hold the appropriate key in Idle mode.My namecard (Menu 2.5)Use this menu to create a name card and send it to other people.Saving your name cardThe procedure for creating your name card is the same as the one for saving a phone number in the phone’s memory.p. 32 Using name card optionsAfter saving your name card, press <Options> to access the following options:•Edit: edit the name card. •Send: send the name card via SMS, MMS, e-mail, or Bluetooth.•Exchange contact details: exchange name cards with another person via Bluetooth.•Delete: delete the name card.Own number (Menu 2.6) Use this feature to check your phone numbers, or to assign a name to each of the numbers. Changes made here do not affect the actual subscriber numbers on your SIM card.

Menu functions Applications (Menu 3)35Management (Menu 2.7)Use this menu to manage Phonebook.•Saving location: select a default memory location to save contacts. If you select Ask on saving, the phone will ask you to select a memory location when saving a number.•Copy all to: copy all of the contacts stored on the SIM card to the phone’s memory, or vice versa.•Delete all: delete all of the contacts from your phone’s memory, your SIM card, or both.•Memory status: check the number of contacts you have stored in Phonebook.Service number (Menu 2.8)Use this menu to view the list of Service Dialling Numbers (SDN) assigned by your service provider, including emergency numbers and directory enquiries. This menu is available if your SIM card supports SDN.1. Scroll to the number you want and press <View>.2. Press <Dial> or [ ].Applications (Menu 3)Use this menu to play Java games, play MP3 music files, or to use convenient features, such as voice recorder, alarm clock, calculator, converter, and stopwatch. You can also synchronise Phonebook or calendar data in the phone’s memory with a computer.To access this menu, press <Menu> in Idle mode and select Applications.Java world (Menu 3.1)Use this menu to access the embedded Java games and downloaded Java applications.Using Java application optionsFrom the Java world screen, select Downloads and press <Options> to access the following options:•Launch: launch the selected application.•Delete: delete the selected application or all applications, except for the embedded ones.•Properties: access the application properties.

Menu functions Applications (Menu 3)37Playing music filesFrom the MP3 player screen, press [Up].During playback, use the following keys:Using MP3 player optionsFrom the MP3 player screen, press <Options> to access the following options:•Play /Pause: begin or pause playback. •Open playlist: access the current play list.•Go to music: access the Music folder.•Send via: send the current file via e-mail or Bluetooth.•Set as: set the file as your ringtone or as a caller alert melody for a Phonebook entry.•Remove from playlist: remove the selected file from the play list.•Settings: change the default settings for playing music files. Repeat mode: select a repeat mode.Shuffle: set the MP3 player to play music at random.Equalizer: select an equalizer setting.3D sound: turn the 3D sound on or off.Skin: select a skin type.Keys FunctionUp Pauses or resumes playback.Left Moves back to the previous file.Right Skips to the next file.Down Stops playback./ Adjusts the volume level.1Turns the 3D sound on or off.2Changes the skin type.3Changes the repeat mode4Changes the equalizer mode6Turns Shuffle mode on or off.

38Menu functionsVolume: select a volume level.•Properties: access the file properties.Accessing the play listFrom the MP3 player screen, press <Options> and select Open playlist.Press <Options> to access the following options:•Play: play the currently selected file.•Add to playlist: add files to the play list.•Change order: move the selected file to the position you want within the play list.•Remove: remove the selected file or all files from the play list.•Properties: access the file properties.Voice recorder (Menu 3.3)Use this menu to record voice memos. A voice memo can be up to one hour long.Recording a voice memo1. Press [Up] to start recording.2. Speak into the microphone. Press [Up] to pause or resume the recording.3. Press <Stop> or [Down] to end recording. The voice memo is saved automatically.4. Press [Up] to review the voice memo.Playing a voice memo1. From the Voice recorder screen, press <Options> and select Go to voice recorder files.2. Select a voice memo.During playback, use the following keys:Keys FunctionUp Pauses or resumes playback.Left Moves backward in a memo.Right Moves forward in a memo./ Adjusts the volume.Down Stops playback.

Menu functions Applications (Menu 3)39Changing the recording modeYou can change the recording mode of the voice recorder. Depending on this setting, the maximum recording time is determined. Before recording a memo, press <Options> and select Settings → a recording mode:•Limit for multimedia message: record a voice memo for adding to an MMS message.•Limit for email: record a voice memo for adding to an e-mail.•Maximum 1 hour: record a voice memo for up to one hour.World time (Menu 3.4)Use this menu to set your local time zone and find out what time it is in another part of the world. Viewing world time1. From the world map, press [Down].2. Press [Left] or [Right] to scroll to the city you want. As the time line moves, the time and date of the given zone display.3. Press [ ] to save the city as your local time zone.Applying daylight savings time1. From the world map, press <Options> and select Set daylight saving time.2. Press [ ] to select the time zones you want. 3. Press <Save>.Alarm (Menu 3.5) Use this menu to set alarms. The alert type for a normal alarm corresponds to the call alert type settings. A wake-up alarm is not affected by your sound setting.Setting an alarm1. Select the type of alarm.2. Set each alarm option.•Alarm: activate the alarm.•Alarm time: enter the time for the alarm to ring. •AM/PM: select AM or PM in 12-hour format.•Repeat: select a repeat unit.•Alarm tone: select an alarm tone.3. Press <Save>.

42Menu functions4. Press [Left] or [Right] to select the unit you want to convert to.The equivalent value for the amount you entered displays.Timer (Menu 3.9)Use this menu to set a period of time for the phone to count down. The phone will sound an alarm when the specified period of time has expired.Starting the timer1. Press <Set>.2. Enter the length of time you want to count down and press <OK>.3. Press [ ] to start counting down.Stopping the timer• Press any key when the timer rings.• Press [ ] on the Timer screen to stop the timer before it rings.Stopwatch (Menu 3.0)Use this menu to measure elapsed time. The maximum time is 10 hours.1. Press [ ] to start the stopwatch.2. Press [ ] to check an interval. You can repeat this step for a total of 3 intervals.SIM AT (Menu 3. ) This menu is available if you use a SIM-AT card that supports SIM Application Tool kit menus and provides additional services, such as news, weather, sports, entertainment, and location services. Available services may vary, depending on your service provider’s plans. For details, see your SIM card instructions or contact your service provider.For the currency converter, you can view and set currency rates by pressing <View rate>.

Menu functions Browser (Menu 4)43Browser (Menu 4)The Wireless Application Protocol (WAP) browser on your phone allows you to access the wireless web. From the wireless web, you can access up-to-date information and a wide variety of media content, such as games, wallpapers, ringtones, and music files.To access this menu, press <Menu> in Idle mode and select Browser.Home (Menu 4.1)Use this menu to connect your phone to the network and load the homepage of the wireless web service provider. You can also press [ ] in Idle mode.Navigating the web browserUsing page optionsFrom any web page, press <Menu> to access the following options:•Bookmarks: bookmark the current page or access the bookmark list.•Reload: reload the current page with updated information.•Home: return to the homepage.•Go to URL: enter a URL address manually.•Show URL: display the URL address of the current web page. You can also set the current page as the homepage for the web browser or a bookmark.•Clear cache: clear the cache. A cache is a temporary memory that stores recently accessed web pages.•Inbox: access push messages in the web browser.To Pressscroll through browser items [Up] or [Down]. select a browser item <Options> and select Select.return to the previous page <Options> and select Back.To Press

Menu functions Messages (Menu 5)45Messages (Menu 5)Use the Messages menu to send and receive text messages, multimedia messages, and e-mails. You can also use push message, and cell broadcast message features.To access this menu, press <Menu> in Idle mode and select Messages.Create message (Menu 5.1)Use this menu to create and send SMS, MMS, or e-mail messages.Text message (Menu 5.1.1)Short Message Service (SMS) allows you to send or receive text messages that may include simple pictures, animated images, and melodies.1. Enter your message.2. Press <Options> to access the following options for creating a message:•Insert: add a template, Phonebook entry, or bookmark. •Add picture/Add animation/Add melody: attach a picture, an animated image, or a melody.•Attach: attach a name card or calendar data as a data format attachment.3. When you have finished, press <Options> and select Save and send or Send only.4. Enter a destination number.To send the message to more than one recipient, fill in additional destination fields.5. Press [ ] to send the message.Multimedia message(Menu 5.1.2)Multimedia Message Service (MMS) delivers messages containing a combination of text, image, video, and audio, from phone to phone or from phone to e-mail.1. Select the Subject line. The maximum number of characters allowed in a message varies by service provider. If your message exceeds the maximum number of characters, the phone will split the message.

Menu functions Messages (Menu 5)474. Enter the e-mail text and press [ ].5. Select File attached line and select one of the following options to add files:•Add image/Add video/Add sound/Add music: add media files stored in the phone’s memory.•Other files: add document files stored in the Other files folder. •Attach: attach a name card or calendar data as a data format attachment.6. Press <Options> to access the following options to edit the e-mail:•Edit: edit the subject or text.•Remove subject/Remove message: clear the subject or text.•Remove attachment: delete the selected attachment.•Remove all attachments: delete all attachments.7. When you have finished, press <Options> and select Send.8. Enter an e-mail address.To send the e-mail to more than one recipient, fill in additional destination fields. 9. Press [ ] to send the e-mail. My messages (Menu 5.2)Use this menu to access messages you have received, sent, or failed to send.Inbox (Menu 5.2.1)This folder stores all of the messages you have received, except for e-mails.Viewing a messageThe following icons may appear on the message list to show the message type: • SMS• MMSDepending on the file type or DRM (Digital Rights Management) system, some files may not be able to be forwarded.

48Menu functions• MMS notification ( : Being retrieved, : Failed to retrieve)• Voicemail• Push message from the web servers• Configuration message, containing network parameters from the service provider• CB (Cell Broadcast) message from your service provider• Delivery report for your sent messagesUsing message optionsWhile viewing a message, press <Options> to access the following options:SMS messages•Reply: reply to the sender via SMS or MMS. •Forward: forward the message to other people.•Delete: delete the message.•Move to phone/Move to SIM: move the message between the SIM card and the phone’s memory.•Cut address: extract URLs, e-mail addresses, or phone numbers from the message.•Copy media: save media content from the message to your phone’s memory.•Protection: protect the message from being deleted. You can protect only those messages stored in the phone’s memory.MMS messages/MMS notifications•Retrieve: retrieve the MMS message from the MMS server.•Reply via SMS: send a reply via SMS.•Reply via MMS to: send a reply via MMS.•Forward: forward the message to other people. •Delete: delete the message.• According to the DRM (Digital Rights Management) system, messages having web content may not be able to be forwarded. • A ! icon next to a message means that a message is of high priority. A grey-coloured message icon is of low priority.

Menu functions Messages (Menu 5)49•Cut address: extract URLs, e-mail addresses, or phone numbers from the message.•Copy media: save media content from the message to your phone’s memory.•Protection: protect the message from being deleted. •Properties: access the message properties.Configuration messages•Install: apply the configuration specified in the message to your phone.•Cut address: extract the URLs, e-mail addresses, or phone numbers from the message.•Delete: delete the message.Push messages•Go to URL: connect to the URL specified in the message.•Cut address: extract URLs, e-mail addresses, or phone numbers from the message.•Delete: delete the message.•Protection: protect the message from being deleted.CB messages•Save: save the message to the phone’s memory.•Cut address: extract URLs, e-mail addresses, or phone numbers from the message.•Delete: delete the message.Delivery reports•Cut address: extract URL, e-mail addresses, or phone numbers from the report.•Delete: delete the report.•Protection: protect the report from being deleted.Drafts (Menu 5.2.2)This folder stores messages you have saved to send at a later time. Outbox (Menu 5.2.3)This folder stores messages that the phone is attempting to send or has failed to send.

50Menu functionsThe following icons are available to show the message status:• Being sent• Failed to sendWhile viewing a message, press <Options> to access the following options:•Send again: retry to send the message.•Forward: forward the e-mail to other people.•Cut address: extract URLs, e-mail addresses, or phone numbers from the message.•Delete: delete the message.•Protection: protect the message from being deleted.•Properties: access the message properties.Sent (Menu 5.2.4)This folder stores messages that you have sent.While viewing a message, press <Options> to access the following options:•Forward: forward the message to other people.•Cut address: extract URLs, e-mail addresses, or phone numbers from the message.•Delete: delete the message.•Protection: protect the message from being deleted. •Properties: access the message properties.Email box (Menu 5.2.5)This folder stores e-mails that you have received.Viewing an e-mail1. Select an e-mail account.2. Press <Yes> when Check for new email displays, or press <Options> and select Check for new email. The phone checks the e-mail server and download new e-mails. The following icons may appear on the list to show the e-mail status:• Retrieved from the server• Being retrieved• Failed to retrieve.3. Select an e-mail or a header.A ! icon next to a message means that a message is of high priority. A grey-coloured message icon is of low priority.

Menu functions Messages (Menu 5)514. Press [ / ] to view other pages in the e-mail.5. Press [ ] or [ ] to view the previous or next e-mail.Using e-mail optionsWhile viewing the e-mail or header, press <Options> to access the following options: •Retrieve: retrieve the e-mail body from the e-mail server.•Reply: send a reply to the sender or to all of the other recipients.•Forward: forward the e-mail to other people.•Delete: delete the e-mail.•Add to filtering list: add the sender’s e-mail address or subject to the Block list to reject e-mails from that address or containing that subject.•Cut address: extract URLs, e-mail addresses, or phone numbers from the e-mail.•Copy media: save the attached files from the e-mail to your phone’s memory.•Protection: protect the e-mail from being deleted.•Properties: access the e-mail properties.My folders (Menu 5.2.6)Use this menu to create new folders and organise your messages.Creating a new folder1. Press <Yes>.2. Enter a folder name and press <OK>.Using folder optionsOn the folder list, press <Options> to access the following options:•Open: open the selected folder.•Add folder: add a new folder.•Rename folder: change the folder name.•Delete: delete the selected folder.

52Menu functionsTemplates (Menu 5.3)Use this create SMS templates with the sentences you use frequently so that you can retrieve and insert them when composing an SMS message.Creating a template1. Select an empty location.2. Enter a message and press <OK>.Using template optionsFrom the template list, press <Options> to access the following options:•Edit: edit the selected template.•Send message: create and send a new message.•Delete: delete the selected template.•Add new: add a new template.Delete all (Menu 5.4)Use this menu to delete messages in each message folder all at once.1. Press [ ] to select the message folders to be cleared.Pressing the key twice displays the message types so that you can specify the ones to be cleared.2. Press <Delete>.3. Press [ ] to select the check box to delete protected messages, and then press <Yes>.4. Press <Yes> to confirm the deletion.Settings (Menu 5.5)Use this menu to set up various options for using the messaging service.Text message (Menu 5.5.1)You can configure default SMS settings.•Send settings: set up the options for sending SMS messages:

Menu functions Messages (Menu 5)55Priority: select the priority level of e-mails.Include signature: attach your name, phone number, a simple memo, or a tag line to youre-mails.Edit name: edit the name in your signature.Edit telephone number: edit the phone number in your signature.Edit note: edit the tag line in your signature.•Reception settings: set up the options for receiving e-mails:Check interval: determine how often the phone checks the server for incoming e-mails. If you select Do not notify, use the Check for new email option to receive new e-mails manually.Read reply: determine whether or not the phone sends a read-reply for incoming e-mails. If you select Reply reminder, the phone asks you to send a read-reply.Reject if larger than: determine the maximum size for incoming e-mails. Your phone will reject e-mails that exceed the specified size.Leave copy of messages on server: leave copies of e-mails on the e-mail server after retrieving.•Block list: specify e-mail addresses or subjects you want to reject.•Email account: set up an e-mail account and select an account to be used.Current account: select an account.Account settings: configure e-mail accounts using different e-mail servers. Set the options for each account:Account name: enter a name for the currently selected account.User name: enter a user name.Email address: enter your e-mail address.User ID: enter your e-mail ID.Password: enter the password.SMTP server: enter the IP address or host name of the outgoing e-mail server.SMTP port: enter the SMTP port number.

Menu functions File manager (Menu 6)57Memory status (Menu 5.6)Use this menu to view the amount of memory currently in use in each message folder.File manager (Menu 6) The File manager menu allows you to access images, videos, music files, and sound files stored in the phone’s memory.To access this menu, press <Menu> in Idle mode and select File manager.Images (Menu 6.1)This menu displays photos you have taken and images downloaded, or received in messages.Viewing an image1. Select an image folder.2. Select an image.Viewing a slide showYou can view your photos as a slide show, a sequential presentation of each photo in the current folder.1. Select Photos.2. Press <Options> and select Slide show.3. Select an interval option. The slide show begins.4. Press <Stop> to stop the slide show.Using image optionsWhile viewing an image, press <Options> to access the following options:•Full screen view: change the display to Full screen view.•List: return to the image list.•Send via: send the file via MMS, e-mail or Bluetooth.•Set as: set the file as wallpaper for the display or a caller ID image for a Phonebook entry.•Delete: delete the file.•Rename: change the file name.According to the DRM (Digital Rights Management) system, web content may not be able to be forwarded. The content is indicated by the icon.

58Menu functions•Move to Favourite images: move the file to the Favourite images folder.•Move to Photos: move the file to the Photos folder.•Move to Downloaded images: move the file to the Downloaded images folder.•Share for bluetooth: share the files with other Bluetooth devices.•Protection: protect the file from being deleted.•Properties: access the file properties.Videos (Menu 6.2)This menu displays video clips you have recorded, downloaded, or received in messages.Playing a video clip1. Select a video folder.2. Select a video clip.During playback, use the following keys:Video clips recorded on other devices, such as camcorders, may not play correctly.Keys FunctionUp Pauses or resumes playback.Left Moves backward in a file.Right Skips forward in a file./ Adjusts the volume.Down Stops playback.

Menu functions File manager (Menu 6)59Using video optionsFrom a video screen, press <Options> to access the following options:•List: return to the video list.•Send via: send the file via MMS, e-mail or Bluetooth.•Set as wallpaper: set the video clip, if saved as a 3gp file, as wallpaper for the display.•Delete: delete the file.•Rename: change the file name.•Move to Favourite videos: move the file to the Favourite videos folder.•Move to Video clips: move the file to the Video clips folder.•Move to Downloaded videos: move the file to the Downloaded videos folder.•Share for bluetooth: share the files with other Bluetooth devices.•Protection: protect the file from being deleted.•Properties: access the file properties.Music (Menu 6.3)This menu displays MP3 files you have downloaded.Select a file. The MP3 player opens.p. 37Sounds (Menu 6.4)This menu displays voice memos you have recorded, and sound files downloaded, or received in messages. Playing a sound clip1. Select a sound folder. 2. Select a sound clip. For a voice memo, see Voice recorder.p. 38Using sound optionsFrom a sound screen, press <Options> to access the following options:•List: return to the sound list.•Send via: send the file via MMS, e-mail, or Bluetooth.•Set as: set the file as your ringtone or as a ringtone for a Phonebook entry.

60Menu functions•Delete: delete the file.•Rename: change the file name.•Move to Favourite sounds: move the file to the Favourite sounds folder.•Move to Voice recorder files: move the file to the Voice list folder.•Move to Downloaded sounds: move the file to the Downloaded sounds folder.•Share for bluetooth: share the files with other Bluetooth devices.•Protection: protect the file from being deleted.•Properties: access the file properties.Other files (Menu 6.5)Files that you have received but which are not supported by your phone are stored in this folder. You cannot open these files on the phone. Unsupported file formats include *.doc, *.ppt, and *.txt.While viewing the file list, press <Options> to access the following options:•Send via: send the file via e-mail or Bluetooth.•Delete: delete the selected file or all files.•Rename: change the file name.•Share for bluetooth: share the files with other Bluetooth devices.•Protection: protect the file from being deleted.•Properties: access the file properties.Memory status (Menu 6.6)Use this menu to view memory information for media items in each folder. Press [Left] or [Right] to view the memory status in size or number of items.Calendar (Menu 7)The Calendar menu enables you to keep track of your schedule.To access this menu, press <Menu> in Idle mode and select Calendar.

Menu functions Calendar (Menu 7)61Consulting the calendarWhen you enter the Calendar menu, the calendar in Month view appears with today’s date indicated by a blue box.Selecting a day• Press [Left] or [Right] to move by day.• Press [Up] or [Down] to move by week.• Press [ / ] to move by month.Using calendar optionsPress <Options> to access the following options:•View mode: change the view mode of the calendar.p. 63•Create: add a new event.next section•Go to: select today’s date or enter a specific date.•Sort by: sort items by the type of event.•Delete: delete the items stored on the calendar by using various deleting options.•Missed alarm events: view events whose alarms you have missed.•Memory status: access memory information for the event items stored on the calendar.Creating an eventYou can store scheduled events, anniversaries, memos, and To do items on the calendar. More than one event per day can be stored.Entering a new scheduled event1. Scroll to a date on the calendar.2. Press <Options> and select Create → Schedule.3. Enter information or change the settings:•Subject: enter the title of the event.•Details: enter event details.•Start date and Start time: enter the starting date and time for the event. •AM/PM: select AM or PM in 12-hour time format.You can delete recurring events in Day view only.

62Menu functions•End date and End time: enter the ending date and time for the event. •AM/PM: select AM or PM in 12-hour time format.•Location: enter information about the event location. •Alarm: set an alarm for the event. •Before: set how long before the event the alarm is to alert you.•Alarm tone: select an alarm tone.•Repeat: set the event to recur and select a repeat unit. •Until: set the ending date, if the event will recur. 4. Press <Save> to save the event.Entering a new anniversary1. Select a date on the calendar.2. Press <Options> and select Create → Anniversary.3. Enter information or change the settings:•Occasion: enter information about the anniversary.•Date: enter the date.•Alarm: select to set an alarm for the anniversary.•Before: set how long before the event the alarm is to alert you. •Alarm time: enter the time for the alarm to ring. •AM/PM: select AM or PM in 12-hour time format.•Alarm tone: select an alarm tone.•Repeat every year: set the phone to remind you of the anniversary every year.4. Press <Save> to save the event.Entering a memo1. Select a date on the calendar.2. Press <Options> and select Create → Memo.3. Enter a memo and press <Save>.

Menu functions Calendar (Menu 7)63Entering a To do item1. Select a date on the calendar.2. Press <Options> and select Create → To do.3. Enter information or change the settings:•To do: enter information about the item.•Start date: enter the starting date.•Due date: enter the ending date.•Select priority: select a priority level.4. Press <Save> to save the event.Viewing an eventOnce you have scheduled events, the event icons and the number of events for a specific day appears at the bottom of the calendar.Accessing an event1. Select a date on the calendar to display the events for the day. 2. Select an event to view its details.3. Press [Left] or [Right] to access the other events scheduled for the selected day.Using event optionsWhile viewing an event, press <Options> to access the following options:•Edit: edit the event.•Create: add a new event.•Send via: send the event via SMS, MMS, e-mail, or Bluetooth.•View mode: change the view mode of the calendar.•Delete: delete the event.•Memory status: access memory information for the events stored on the calendar.Viewing an event in different modeYou can change the calendar display to Day view or Week view. Press <Options> and select View mode → a view mode.• Scheduled event • Anniversary• To do item • Memo

64Menu functionsDay viewYou can view events for the selected date. Select an event to view its details.The following icons may display to indicate the event status:• Alarm set • Recurring event• To do item’s priority (Red: high, Blue: normal, Grey: low)• Completed, to do itemWeek viewYou can view events for the selected week. A cell on the timetable indicates the presence of a schedule item. Select a cell in the day you want.Camera (Menu 8)You can use the camera module embedded in your phone to take photos and record videos.To access this menu, press <Menu> in Idle mode and select Camera, or press and hold []. Taking a photoYou can take photos in various modes. The camera produces JPEG photos. 1. Access the Camera menu or press and hold [] to turn on the camera.• Do not take photos of people without their permission.• Do not take photos in a place where cameras are not allowed.• Do not take photos in a place where you may interfere with another person’s privacy.When you take a photo in direct sunlight or in bright conditions, shadows may appear on the photo.

Menu functions Camera (Menu 8)652. Adjust the image to be captured.• Press < > to access camera options.next section• Use the keypad to change the camera settings or switch to other modes.Using the keypad in Capture mode3. Press [] to take a photo. The photo is saved in the Photos folder.Using camera options in Capture modeIn Capture mode, press < > to access the following options:•Record video: switch to Record mode.•Shooting mode: take a photo in the following modes:Single shot: take a photo in normal mode. You can select whether or not the camera automatically saves a photo.Multi shot: take a series of action stills. You can select the number of photos the camera will take and shooting speed.Mosaic shot: take several stills and save them in one frame. You can select the layout and save mode.•Effects: change the colour tone or apply a special effect.•Frames: apply a decorative frame.•Flash: determine the use of the flash.•Timer: set a time delay before the camera takes a photo.•Go to photos: access the Photos folder.•Settings: change the default settings for taking a photo.Size: select an image size. Quality: select an image quality setting. 4.To Pressaccess photo options <Options>.p. 66delete the photo [C] and then <Yes>.return to Capture mode <Preview>.

66Menu functionsViewfinder mode: select a preview screen.Shutter sound: select the sound that you hear when you press the shutter release, [].•Shortcuts: view the functions of the keys you can use in Capture mode.Using the keypad in Capture modeYou can use the keypad to customise your camera settings in Capture mode.Using photo optionsAfter saving a photo, press <Options> to access the following options:•View: access one of the multi-shot photos.•Take another: return to Capture mode.Key FunctionFlips the image vertically.Shows the mirror image.Left/Right Adjusts the image brightness.Up/Down Zooms in or out.1Switches to Record mode.p. 672Changes the image size.3Changes the image quality.4Changes the shooting mode.5Changes the colour tone or applies a special effect.6Reduces the distortion on the image to maximise detail and sharpness.7Selects a decorative frame.8Sets the timer.9Goes to the Photos folder.Changes the preview screen.0Determines the use of the flash.Key Function

Menu functions Camera (Menu 8)67•Send via: send the file via MMS, e-mail, or Bluetooth.•Set as: set the photo as wallpaper for the display or a caller ID image for a Phonebook entry.•Delete: delete the file.•Rename: change the file name.•Go to photos: access the Photos folder.p. 57•Protection: protect the file from being deleted.•Properties: access the file properties.Recording a videoYou can record a video of what is displayed on the camera screen and save it.1. In Capture mode, press [1].2. Adjust the image to be captured. • Press < > to access camera options. next section• Use the keypad to change the camera settings or switch to other modes.Using the keypad in Record mode3. Press [] to start recording.4. Press [] or < > to stop recording. The video is automatically saved in the Video clips folder.Using camera options in Record modeIn Record mode, press < > to access the following options:•Take photo: switch to Capture mode.•Effects: change the colour tone or apply a special effect.•Flash: determine the use of the flash.•Timer: set a time delay before the camera starts recording.5.To Pressplay back the video clip [ ].access video options <Options>.p. 69delete the video clip [C] and then <Yes>.return to Record mode <Preview>.

68Menu functions•Go to videos: access the Video clips folder.•Settings: change the following settings for recording a video:Recording mode: select a video recording mode.Select Limit for MMS/Wallpaper to record a video suitable for messaging or for setting as wallpaper. The video clip is saved in 3GP format.Select Normal to record a video within the limit of the currently available memory. The video clip is saved in MP4 format.Size: select a frame size. Quality: select an image quality setting. Viewfinder: select a preview screen.Audio record: record audio with a video clip.•Shortcuts: view the functions of the keys you can use in Record mode.Using the keypad in Record modeYou can use the keypad to customise your camera settings in Record mode:Keys FunctionFlips the image vertically.Shows the mirror image.Left/Right Adjusts the image brightness.Up/Down Zooms in or out.1Switches to Capture mode.p. 642Changes the frame size.3Changes the image quality.4Changes the video recording mode.5Changes the colour tone or applies a special effect.6Reduces the distortion on the image to maximise detail and sharpness.7Mutes or unmutes the audio.

Menu functions Settings (Menu 9)69Using video optionsAfter saving a video clip, press <Options> to access the following options:•Record another: return to Record mode.•Send via: send the file via MMS, e-mail, or Bluetooth.•Set as wallpaper: set the video clip, if saved as a 3GP file, as wallpaper for the display.•Delete: delete the file.•Rename: change the file name.•Go to videos: access the Video clips folder. p. 58•Protection: protect the file from being deleted.•Properties: access the file properties.Settings (Menu 9)The Settings menu provides you with various setting options to customise the phone as your preferences and needs. You can also reset the settings to their default values.To access this menu, press <Menu> in Idle mode and select Settings.Time & Date (Menu 9.1)Use this menu to change the time and date displayed on your phone. Before setting the time and date, specify your time zone in the World time menu. p. 39•Set time: enter the current time. •AM/PM: select AM or PM in 12-hour time format.•Time format: select a time format.8Sets the timer.9Goes to the Video clips folder.Changes the preview screen.0Determines the use of the flash.Keys Function

70Menu functions•Set date: enter the current date.•Starting day of calendar: set which day of the week the calendar starts with.Phone settings (Menu 9.2)Many different features of your phone’s system can be customised to suit your preferences.Language (Menu 9.2.1)Use this menu to select one of several languages for the display text.Greeting message (Menu 9.2.2)Use this menu to enter the greeting that is displayed briefly when the phone is switched on.Short cut (Menu 9.2.3)You can use the Navigation keys as shortcuts to access specific menus directly from Idle mode. Use this menu to assign a shortcut to a key.Assigning a shortcut menu1. Select a key to be used as a shortcut key.2. Select a menu to be assigned to the key.Using shortcut optionsPress <Options> to access the following options:•Change: assign or change a shortcut menu.•Remove: deactivate the shortcut assignment to the selected key.•Remove all: deactivate all shortcut assignments.Auto keypad lock (Menu 9.2.4)Use this menu to set the length of time that elapses before the keypad locks automatically.Volume key (Menu 9.2.5)Use this menu to set whether the phone mutes the call ringer or reject a call if you press and hold [ / ] when a call comes in.

72Menu functionsDialling display (Menu 9.3.5) Use this menu to select a font colour for the numbers entered while dialling.Service light (Menu 9.3.6) The service light on the phone blinks to indicate the service status. Use this menu to activate or deactivatethe feature of the service light.Sound settings (Menu 9.4)Use this menu to customise various sound settings.Incoming call(Menu 9.4.1)Use this menu to change the sound settings for incoming calls.•Ringtone: select a ringtone to be used for the call ringer.•Volume: select a ringer volume.•Alert type: specify how you are to be informed of incoming calls.Keypad tone (Menu 9.4.2)Use this menu to select the tone that the phone sounds when you press a key.Message tone (Menu 9.4.3) Use this menu to change the sound settings for incoming SMS messages, MMS messages, e-mails, and CB messages individually. •Tone: select one of several message tones. •Alert type: specify how you are to be informed that a message comes in.•Repetition: specify how often the phone informs you of a new message.Power on/off (Menu 9.4.4)Use this menu to select the melody that the phone sounds when it is switched on or off. Quiet mode (Menu 9.4.5)Use this menu to set how the phone acts to alert you to a specific event in Quiet mode, instead of making sounds. You can adjust the keypad tone volume using [ / ] in Idle mode.

Menu functions Settings (Menu 9)73Extra tones (Menu 9.4.6) Use this menu to customise additional tones for the phone. •Minute minder: set the phone to beep every minute during an outgoing call to keep you informed of the length of your call.•Connection tone: set the phone to beep when an outgoing call is connected to the system.•Alert on call: set the phone to beep when you receive a new message or when the time for an alarm comes during a call.•Error tone: set the phone to beep when you have made a mistake or something wrong happens on the phone.Network services (Menu 9.5)Use this menu to access network services. Please contact your service provider to check their availability and subscribe to them, if you wish.Call diverting (Menu 9.5.1)This network service reroutes incoming calls to a phone number that you specify.1. Select a call diverting option:•Divert always: divert all calls.•Busy: divert calls when you are on another call.•No reply: divert calls when you do not answer the phone.•Unreachable: divert calls when you are not in an area covered by your service provider or when your phone is switched off.•Cancel all: cancel all call diverting options.2. Select the type of calls to be diverted.3. Select Activate. To deactivate call diverting, select Deactivate.4. Move to the Divert to line.5. Enter the number to which calls are to be diverted.6. If you selected No reply, move to the Seconds line and select the length of time the network delays before diverting a call.7. Press <Select>.

74Menu functionsCall barring(Menu 9.5.2)This network service allows you to restrict your calls.1. Select a call barring option:•All outgoing: prohibit all outgoing calls.•International: prohibit international calls.•International except to home: only allow calls to numbers within the current country when you are abroad, and to your home country.•All incoming: prohibit incoming calls.•Incoming while abroad: prohibit incoming calls when you use your phone outside of your home country.•Cancel all: cancel all call barring settings, allowing calls to be sent and received normally.•Change barring password: change the call barring password obtained from your service provider.2. Select the type of calls to be barred. 3. Select Activate. To deactivate call barring, select Deactivate.4. Enter the call barring password supplied by your service provider and press <Select>.Call waiting(Menu 9.5.3)This network service informs you when someone is trying to reach you while you are on another call.1. Select the type of calls to which call waiting option will apply.2. Select Activate and press <Select>. To deactivate call waiting, select Deactivate. Network selection (Menu 9.5.4)This network service allows you to either automatically or manually select the network to be used while roaming outside of your home area. You can select a network other than your home network only if there is a valid roaming agreement between the two.

Menu functions Settings (Menu 9)75Caller ID (Menu 9.5.5)This network service allows you to prevent your phone number from being displayed on the phone of the person being called. If you select Default, the phone will use the default setting provided by the network.Voice mail server (Menu 9.5.6)Use this menu to store the number of the voicemail server and access your voicemails.•Connect to voice server: connect to the voicemail server to listen to your messages.•Voice server number: enter the voicemail server number.Closed user group (Menu 9.5.7)Use this menu to set incoming and outgoing calls to be restricted to a selected user group. For details about how to create a closed user group, contact your service provider.•Index list: add, delete, or activate CUG index numbers. •Outside access: enable calls to numbers other than those in the closed user group. This feature depends on the nature of your CUG subscription.•Default group: enable the default CUG, if you have set one with your service provider. When making a call, you are given the option of using your default CUG, instead of selecting one from the list.Band selection (Menu 9.5.8)For the phone to make and receive phone calls, it must register with an available network. Your phone can handle any of the following types of networks: GSM 1900 and Combined GSM 900/1800.Some networks may not allow you to change this setting.You must store the voicemail server number before accessing the server. Your service provider can give you the number.

76Menu functionsThe country where you purchased your phone determines the default band that it uses. When you travel abroad, you may need to change to an appropriate band. Bluetooth (Menu 9.6) Using the Bluetooth feature, you can connect the phone wirelessly to other Bluetooth devices and exchange data with them, talk hands-free, or control the phone remotely.Bluetooth technology allows free wireless connections between all Bluetooth-compliant devices within a range of 10 meters. Since the devices communicate using radio waves, they do not need to be in line of sight to each other.Setting up the Bluetooth featureThe Bluetooth menu provides the following options:•Activation: activate or deactivate the Bluetooth feature.•My devices: search for connectable Bluetooth devices. •My phone’s visibility: allow other Bluetooth devices to search for your phone.•My phone’s name: assign a Bluetooth device name to your phone, which is then displayed on other devices.•Secure mode: determine if the phone asks for your confirmation when other devices access your data.•Bluetooth services: display available Bluetooth services. Searching for and pairing with a Bluetooth device1. From the Bluetooth setting options, select My devices.• If there are obstacles between the devices, the operating distance may be reduced.• It is recommended that you don’t use the Bluetooth feature while using multimedia features, such as voice recorder, camera, and MP3 player, or vice versa, for better performance.• Some devices may not be compatible with your phone.

Menu functions Settings (Menu 9)772. Select Search for new devices.After searching, a list of devices to which you can connect displays. The following icons indicate the type of device:The colour of the icon indicates the status of the the device:• Grey for unpaired devices• Blue for paired devices• Red for devices that are currently connected to your phone3. Select a device.4. Enter a Bluetooth PIN and press <OK>. This code is used just once and you don’t need to memorise it.When the owner of the other device enters the same code, pairing is complete.Using device optionsFrom the device list, press <Options> to access the following options: •Connect: connect to a headset or hands-free car kit.•Disconnect: end the connection with the connected device.•Browse files: search for data from the device and import data directly to your phone.•Service list: access the Bluetooth service list of the device.•Rename: rename the paired device.•Authorise device/Unauthorised device: determine whether or not the phone asks you to permit connection when other devices try to connect to your phone.•Delete: remove the selected device or all devices from the list.• Headset • Hands-free car kit• Computer • Printer• Mobile phone • PDA• Unknown deviceSome devices, especially headsets or hands-free car kits, may have a fixed Bluetooth PIN, such as 0000. If the other device has a code, you must enter it.

78Menu functionsSending data via Bluetooth1. Activate the Bluetooth feature.2. Select the application in which the item you want to send is stored. 3. Scroll to the item you want and press <Options>.4. Select Send via → Bluetooth.The phone searches for devices within range and displays a list of available devices.5. Select a device.6. If necessary, enter the Bluetooth PIN needed for pairing and press <OK>.Receiving data via BluetoothTo receive data via Bluetooth, your phone’s Bluetooth feature must be active.1. If an unauthorised Bluetooth device sends data to your phone, press <Yes> to allow the device to access your phone.2. Press <Yes> to receive data.Security (Menu 9.7)Use this menu to protect the phone against unauthorised use by managing the several access codes of your phone and SIM card.PIN check (Menu 9.7.1)The 4- to 8-digit PIN (Personal Identification Number) protects your SIM card against unauthorised use. When this feature is enabled, the phone requires your PIN each time it is switched on.Change PIN(Menu 9.7.2) Use this menu to change your PIN. The PIN check feature must be enabled to use this feature.If you enter an incorrect PIN/PIN2 three times in succession, the SIM card is blocked. To unblock it you need to enter your PUK/PUK2 (Personal Unblocking Key). The codes are supplied by your service provider.

Menu functions Settings (Menu 9)79Phone lock (Menu 9.7.3) Use this menu to lock the phone from unauthorised use. When this feature is enabled, you must enter a 4- to 8-digit phone password each time the phone is switched on.The password is preset to 00000000. To change the password, use the Change password menu.Change password(Menu 9.7.4)Use this menu to change your phone password. Privacy(Menu 9.7.5)Use this menu to lock access to messages, files, or all menu functions on the phone, except for call functions. When a privacy option is enabled, you must enter the phone password to access the locked items or functions. SIM lock(Menu 9.7.6)This menu allows your phone to work only with the current SIM by assigning a SIM lock code. You must enter the SIM lock code to use a different SIM card.FDN mode (Menu 9.7.7) If supported by your SIM card, Fixed Dialling Number (FDN) mode restricts your outgoing calls to a limited set of phone numbers. When this feature is enabled, you can make calls only to phone numbers stored on the SIM card.Change PIN2 (Menu 9.7.8)If supported by your SIM card, use this feature to change your current PIN2. Connection settings (Menu 9.8)Use this menu to create and customise the profiles containing the settings for connecting your phone to the network. You need these settings to use the web browser or send MMS messages or e-mails.

82Solve problems“Enter PUK”• The PIN code has been entered incorrectly three times in succession, and the phone is now blocked. Enter the PUK supplied by your service provider.“No service,” “Network failure,” or “Not done” displays• The network connection has been lost. You may be in a weak signal area. Move and try again.• You are trying to access an option for which you have no subscription with your service provider. Contact the service provider for further details.You have entered a number but it was not dialled• Be sure that you have pressed [ ].• Be sure you have accessed the right cellular network.• Be sure that you have not set an outgoing call barring option.Your correspondent cannot reach you• Be sure that your phone is switched on. ([ ] pressed for more than one second.)• Be sure that you are accessing the correct cellular network.• Be sure that you have not set an incoming call barring option.Your correspondent cannot hear you speaking• Be sure that you have switched on the microphone.• Be sure that you are holding the phone close enough to your mouth. The microphone is located at the bottom of the phone.The phone starts beeping and “Warning Low battery” flashes on the display• Your battery is insufficiently charged. Recharge the battery.The audio quality of the call is poor• Check the signal strength indicator on the display ( ). The number of bars indicates the signal strength from strong ( ) to weak ( ).• Try moving the phone slightly or moving closer to a window if you are in a building.

84Health and safety informationExposure to Radio Frequency (RF) SignalsCertification Information (SAR)Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. government. These FCC exposure limits are derived from the recommendations of two expert organizations, the National Counsel on Radiation Protection and Measurement (NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases, the recommendations were developed by scientific and engineering experts drawn from industry, government, and academia after extensive reviews of the scientific literature related to the biological effects of RF energy.The exposure limit set by the FCC for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of the rate of absorption of RF energy by the human body expressed in units of watts per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates a substantial margin of safety to give additional protection to the public and to account for any variations in measurements.SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.NorthAmerica_Cingular_T-mobile.fm Page 9 Monday, September 26, 2005 2:42 AM

Health and safety information 85Before a new model phone is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC. Tests for each model phone are performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC.For body worn operations, this model phone has been tested and meets the FCC RF exposure guidelines when used with a Samsung accessory designated for this product orwhen used with an accessory that contains no metal and that positions the handset a minimum 1.5cm from the body. Non-compliance with the above restrictions may result in violation of FCC RF exposure guidelines.The FCC has granted an Equipment Authorization for this mobile phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. The maximum SAR values for this model phone as reported to the FCC are: 1900• Head: 1.25 W/Kg.• Body-worn: 0.301 W/Kg.SAR information on this and other model phones can be viewed on-line at www.fcc.gov/oet/fccid. This site uses the phone FCC ID number, A3LSGHP300. Sometimes it may be necessary to remove the battery pack to find the number. Once you have the FCC ID number for a particular phone, follow the instructions on the website and it should provide values for typical or maximum SAR for a particular phone. Additional product specific SAR information can also be obtained at www.fcc.gov/cgb/sar.사본 - NorthAmerica_Cingular_T-mobile.fm Page 10 Monday, September 26, 2005 6:47 AM

86Health and safety informationConsumer Information on Wireless PhonesThe U.S. Food and Drug Administration (FDA) has published a series of Questions and Answers for consumers relating to radio frequency (RF) exposure from wireless phones. The FDA publication includes the following information:What kinds of phones are the subject of this update?The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called “cell,” “mobile,” or “PCS” phones. These types of wireless phones can expose the user to measurable radio frequency energy (RF) because of the short distance between the phone and the user's head. These RF exposures are limited by Federal Communications Commission safety guidelines that were developed with the advice of FDA and other federal health and safety agencies. When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a person's RF exposure decreases rapidly with increasing distance from the source. The so-called “cordless phones,” which have a base unit connected to the telephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures well within the FCC's compliance limits.Do wireless phones pose a health hazard?The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radio frequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.NorthAmerica_Cingular_T-mobile.fm Page 11 Monday, September 26, 2005 2:42 AM

Health and safety information 87What is FDA's role concerning the safety of wireless phones?Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radio frequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:• “Support needed research into possible biological effects of RF of the type emitted by wireless phones;• “Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and• “Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health.FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:• “National Institute for Occupational Safety and Health• “Environmental Protection Agency• “Federal Communications Commission• “Occupational Safety and Health Administration• “National Telecommunications and Information AdministrationThe National Institutes of Health participates in some interagency working group activities, as well.FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF NorthAmerica_Cingular_T-mobile.fm Page 12 Monday, September 26, 2005 2:42 AM

88Health and safety informationexposure. FCC relies on FDA and other health agencies for safety questions about wireless phones.FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the primary subject of the safety questions discussed in this document.What are the results of the research done already?The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of radio frequency energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to be pre-disposed to develop cancer in absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we don't know with certainty what the results of such studies mean for human health.Three large epidemiology studies have been published since December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phones RF exposures. However, none of the studies can answer questions about long-term exposures, since the average period of phone use in these studies was around three years.NorthAmerica_Cingular_T-mobile.fm Page 13 Monday, September 26, 2005 2:42 AM

Health and safety information 89What research is needed to decide whether RF exposure from wireless phones poses a health risk?A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but ten or more years' follow-up may be needed to provide answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop - if they do - may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this measurement, such as the angle at which the phone is held, or which model of phone is used.What is FDA doing to find out more about the possible health effects of wireless phone RF?FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radio frequency energy (RF).FDA has been a leading participant in the World Health Organization international Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues.FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts NorthAmerica_Cingular_T-mobile.fm Page 14 Monday, September 26, 2005 2:42 AM

90Health and safety informationto independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world.What steps can I take to reduce my exposure to radio frequency energy from my wireless phone?If there is a risk from these products - and at this point we do not know that there is - it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radio frequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure.• “If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna.Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use.What about children using wireless phones?The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radio frequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure.Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For NorthAmerica_Cingular_T-mobile.fm Page 15 Monday, September 26, 2005 2:42 AM

Health and safety information 91example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists. Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort. These systems reduce the absorption of RF energy in the head because the phone, which is the source of the RF emissions, will not be placed against the head. On the other hand, if the phone is mounted against the waist or other part of the body during use, then that part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements regardless of whether they are used against the head or against the body. Either configuration should result in compliance with the safety limit.Do wireless phone accessories that claim to shield the head from RF radiation work?Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone. Studies have shown that these products generally do not work as advertised. Unlike “hand-free” kits, these so-called “shields” may interfere with proper operation of the phone. The phone may be forced to boost its power to compensate, leading to an increase in RF absorption. In February 2002, the Federal trade Commission (FTC) charged two companies that sold devices that claimed to protect wireless phone users from radiation with making false and unsubstantiated NorthAmerica_Cingular_T-mobile.fm Page 16 Monday, September 26, 2005 2:42 AM

92Health and safety informationclaims. According to FTC, these defendants lacked a reasonable basis to substantiate their claim.What about wireless phone interference with medical equipment?Radio frequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. FDA has tested wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a compatible phone and a compatible hearing aid at the same time. This standard was approved by the IEEE in 2000.FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the problem.Additional information on the safety of RF exposures from various sources can be obtained from the following organizations:• FCC RF Safety Program:http://www.fcc.gov/oet/rfsafety/• Environmental Protection Agency (EPA):http://www.epa.gov/radiation/• Occupational Safety and Health Administration's (OSHA): http://www.osha.gov/SLTC/radiofrequencyradiation/index.htmlNorthAmerica_Cingular_T-mobile.fm Page 17 Monday, September 26, 2005 2:42 AM

Health and safety information 93• National institute for Occupational Safety and Health (NIOSH):http://www.cdc.gov/niosh/emfpg.html • World health Organization (WHO):http://www.who.int/peh-emf/• International Commission on Non-Ionizing Radiation Protection:http://www.icnirp.de• National Radiation Protection Board (UK):http://www.nrpb.org.uk• Updated 4/3/2002: US food and Drug Administrationhttp://www.fda.gov/cellphonesRoad SafetyYour wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold.When driving a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips:1. Get to know your wireless phone and its features, such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.2. When available, use a hands-free device. If possible, add an additional layer of convenience and safety to your wireless phone with one of the many hands free accessories available today.NorthAmerica_Cingular_T-mobile.fm Page 18 Monday, September 26, 2005 2:42 AM

94Health and safety information3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voice mail answer it for you.4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice and even heavy traffic can be hazardous.5. Do not take notes or look up phone numbers while driving. Jotting down a “to do” list or flipping through your address book takes attention away from your primary responsibility, driving safely.6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.7. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road.8. Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone!9. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.10.Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency number.NorthAmerica_Cingular_T-mobile.fm Page 19 Monday, September 26, 2005 2:42 AM

Health and safety information 95“The wireless industry reminds you to use your phone safely when driving.”For more information, please call 1-888-901-SAFE, or visit our web-site www.wow-com.comProvided by the Cellular Telecommunications & Internet AssociationOperating EnvironmentRemember to follow any special regulations in force in any area and always switch your phone off whenever it is forbidden to use it, or when it may cause interference or danger. When connecting the phone or any accessory to another device, read its user's guide for detailed safety instructions. Do not connect incompatible products.As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder).Using Your Phone Near Other Electronic DevicesMost modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Consult the manufacturer to discuss alternatives.PacemakersPacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker.These recommendations are consistent with the independent research and recommendations of Wireless Technology Research.Persons with pacemakers:• should always keep the phone more than 15 cm (6 inches) from their pacemaker when the phone is switched on.• should not carry the phone in a breast pocket.NorthAmerica_Cingular_T-mobile.fm Page 20 Monday, September 26, 2005 2:42 AM

96Health and safety information• should use the ear opposite the pacemaker to minimize potential interference.If you have any reason to suspect that interference is taking place, switch your phone off immediately.Hearing AidsSome digital wireless phones may interfere with some hearing aids. In the event of such interference, you may wish to consult your hearing aid manufacturer to discuss alternatives.Other Medical DevicesIf you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Switch your phone off in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.Posted FacilitiesSwitch your phone off in any facility where posted notices require you to do so.Potentially Explosive EnvironmentsSwitch your phone off when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.Users are advised to switch the phone off while at a refueling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution NorthAmerica_Cingular_T-mobile.fm Page 21 Monday, September 26, 2005 2:42 AM

97areas), chemical plants or where blasting operations are in progress.Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine.Emergency CallsThis phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user programmed functions, which cannot guarantee connection in all conditions. Therefore, you should never rely solely on any wireless phone for essential communications (medical emergencies, for example).Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers.To make an emergency call:1. If the phone is not on, switch it on.2. Key in the emergency number for your present location (for example, 911 or other official emergency number). Emergency numbers vary by location.3. Press .If certain features are in use (call barring, for example), you may first need to deactivate those features before you can make an emergency call. Consult this document and your local cellular service provider.When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your phone may be the only means of communication at the scene of an accident; do not cut off the call until given permission to do so.NorthAmerica_Cingular_T-mobile.fm Page 22 Monday, September 26, 2005 2:42 AM

98Health and safety informationRestricting Children's access to your PhoneYour phone is not a toy. Children should not be allowed to play with it because they could hurt themselves and others, damage the phone or make calls that increase your phone bill.FCC Notice and CautionsFCC NoticeThe phone may cause TV or radio interference if used in close proximity to receiving equipment. The FCC can require you to stop using the phone if such interference cannot be eliminated.Vehicles using liquefied petroleum gas (such as propane or butane) must comply with the National Fire Protection Standard (NFPA-58). For a copy of this standard, contact the National Fire Protection Association, One Battery march Park, Quincy, MA 02269, Attn: Publication Sales Division.CautionsChanges or modifications made in the radio phone, not expressly approved by Samsung, will void the user’s authority to operate the equipment.Only use approved batteries, antennas and chargers. The use of any unauthorized accessories may be dangerous and void the phone warranty if said accessories cause damage or a defect to the phone.Although your phone is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting, bending or sitting on it.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.NorthAmerica_Cingular_T-mobile.fm Page 23 Monday, September 26, 2005 2:42 AM

99Other Important Safety Information• Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device.• Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.• Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories.• For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If wireless equipment is improperly installed and the air bag inflates, serious injury could result.• Switch your phone off before boarding an aircraft. The use of wireless phone in aircraft is illegal and may be dangerous to the aircraft's operation.• Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both.Product PerformanceGetting the Most Out of Your Signal ReceptionThe quality of each call you make or receive depends on the signal strength in your area. Your phone informs you of the current signal strength by displaying a number of bars next to the signal strength icon. The more bars displayed, the stronger the signal.If you're inside a building, being near a window may give you better reception.Understanding the Power Save FeatureIf your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated. If your phone is active, it periodically rechecks service availability or you can check it yourself by pressing any key.Anytime the Power Save feature is activated, a message displays on the screen. When a signal is found, your phone returns to standby mode.NorthAmerica_Cingular_T-mobile.fm Page 24 Monday, September 26, 2005 2:42 AM

100Health and safety informationUnderstanding How Your Phone OperatesYour phone is basically a radio transmitter and receiver. When it's turned on, it receives and transmits radio frequency (RF) signals. When you use your phone, the system handling your call controls the power level. This power can range from 0.006 watts to 0.2 watts in digital mode.Maintaining Your Phone's Peak PerformanceFor the best care of your phone, only authorized personnel should service your phone and accessories. Faulty service may void the warranty.There are several simple guidelines to operating your phone properly and maintaining safe, satisfactory service.• Hold the phone with the antenna raised, fully-extended and over your shoulder.• Try not to hold, bend or twist the phone's antenna.• Don't use the phone if the antenna is damaged.• Speak directly into the phone's receiver.• Avoid exposing your phone and accessories to rain or liquid spills. If your phone does get wet, immediately turn the power off and remove the battery. If it is inoperable, call Customer Care for service.Availability of Various Features/Ring TonesMany services and features are network dependent and may require additional subscription and/or usage charges. Not all features are available for purchase or use in all areas. Downloadable Ring Tones may be available at an additional cost. Other conditions and restrictions may apply. See your service provider for additional information.Battery Standby and Talk TimeStandby and talk times will vary depending on phone usage patterns and conditions. Battery power consumption depends on factors such as network configuration, signal strength, operating temperature, features selected, frequency of calls, and voice, data, and other application usage patterns. NorthAmerica_Cingular_T-mobile.fm Page 25 Monday, September 26, 2005 2:42 AM

Health and safety information 101Battery Precautions• Never use any charger or battery that is damaged in any way.• Use the battery only for its intended purpose.• If you use the phone near the network's base station, it uses less power; talk and standby time are greatly affected by the signal strength on the cellular network and the parameters set by the network operator.• Battery charging time depends on the remaining battery charge and the type of battery and charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery.• If left unused, a fully charged battery will discharge itself over time.• Use only Samsung-approved batteries and recharge your battery only with Samsung-approved chargers. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its life.• Extreme temperatures will affect the charging capacity of your battery: it may require cooling or warming first.• Do not leave the battery in hot or cold places, such as in a car in summer or winter conditions, as you will reduce the capacity and lifetime of the battery. Always try to keep the battery at room temperature. A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Li-ion batteries are particularly affected by temperatures below 0 °C (32 °F).• Do not short-circuit the battery. Accidental short- circuiting can occur when a metallic object (coin, clip or pen) causes a direct connection between the + and - terminals of the battery (metal strips on the battery), for example when you carry a spare battery in a pocket or bag. Short-circuiting the terminals may damage the battery or the object causing the short-circuiting.NorthAmerica_Cingular_T-mobile.fm Page 26 Monday, September 26, 2005 2:42 AM

102Health and safety information• Dispose of used batteries in accordance with local regulations. In some areas, the disposal of batteries in household or business trash may be prohibited. For safe disposal options for Li-Ion batteries, contact your nearest Samsung authorized service center. Always recycle. Do not dispose of batteries in a fire.Care and MaintenanceYour phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfill any warranty obligations and allow you to enjoy this product for many years.• Keep the phone and all its parts and accessories out of the reach of small children.• Keep the phone dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits.• Do not use the phone with a wet hand. Doing so may cause an electric shock to you or damage to the phone.• Do not use or store the phone in dusty, dirty areas, as its moving parts may be damaged.• Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside the phone, which may damage the phone's electronic circuit boards.• Do not drop, knock or shake the phone. Rough handling can break internal circuit boards.• Do not use harsh chemicals, cleaning solvents or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water solution.NorthAmerica_Cingular_T-mobile.fm Page 27 Monday, September 26, 2005 2:42 AM

Health and safety information 103• Do not paint the phone. Paint can clog the device's moving parts and prevent proper operation.• Do not put the phone in or on heating devices, such as a microwave oven, a stove or a radiator. The phone may explode when overheated.• When the phone or battery gets wet, the label indicating water damage inside the phone changes color. In this case, phone repairs are no longer guaranteed by the manufacturer's warranty, even if the warranty for your phone has not expired. • If your phone has a flash or light, do not use it too close to the eyes of people or animals. This may cause damage to their eyes.• Use only the supplied or an approved replacement antenna. Unauthorized antennas or modified accessories may damage the phone and violate regulations governing radio devices.• If the phone, battery, charger or any accessory is not working properly, take it to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service.NorthAmerica_Cingular_T-mobile.fm Page 28 Monday, September 26, 2005 2:42 AM

104IndexAAB mode, text input • 23Alarm • 39Answeringcall • 26second call • 27Anykey answer • 71Auto redial • 71BBackground image • 71Backlight time, set • 71Band selection • 75Barring, calls • 74Batterycharging • 7low indicator • 8precautions • 84Bluetoothreceiving, data • 78sending, data • 78settings • 76Broadcast messages • 49, 56Browser, web • 43CCalculator • 41Calendar • 60Call cost • 31Call recordsdialled • 30missed • 30received • 30Call time • 30Caller groups • 33Caller ID • 75Calls answering • 26barring • 74diverting • 73holding • 27redialling • 25rejecting • 26transferring • 28waiting • 74Cameraphotos • 64videos • 67CB (Cell Broadcast) messages • 49, 56Characters, enter • 23Configuration messages • 49Connection tone • 73Converter • 41Creating messagese-mail • 46MMS • 45SMS • 45CUG (Closed User Group) • 75DDate, set • 70Deletingcall records • 29e-mail • 50, 51, 52events • 63MMS • 48, 50, 52phonebook • 35SMS • 48, 50, 52Dialled calls • 30Dialling font, set • 72Displaybacklight, set • 71brightness • 71icons • 10language • 70layout • 10settings • 71Diverting, calls • 73DRM (Digital Rights Management) • 57DTMF tones, send • 28EE-mailscreating/sending • 46deleting • 51setting • 54viewing • 50Emergency calls • 87FFDN (Fixed Dialling Number) mode • 79File manager • 57GGames • 35Greeting message • 70

106Indexvoice memos • 38Rediallingautomatically • 71manually • 25Resetting phone • 81Ringerincoming calls • 72messages • 72Road safety • 85Roaming • 74SSafetyinformation • 83precautions • 1Security, calls • 78Sent messages • 50Short cut • 70SIM cardinserting • 7locking • 79Skin colour • 71SMS messagescreating/sending • 45deleting • 48setting • 52viewing • 47Sound settings • 72Sounds, downloaded • 59Speakerphone • 28Speed dial • 33Stopwatch • 42Switching on/offmicrophone • 28phone • 8TT9 mode, text input • 24Templates, message • 52Text, enter • 23Time, set • 69Timer • 42VVideosplaying • 58recording • 67Voice recorderplaying • 38recording • 38Voicemail server • 75WWaiting call • 74Wallpaper • 71Web browseraccess • 43bookmarks • 44World time • 39