Samsung Electronics Co SGHP705 Single-Band PCS GSM Phone User Manual
Samsung Electronics Co Ltd Single-Band PCS GSM Phone Users Manual
Users Manual
User Guide
Samsung Telecommunications America
1130 East Arapaho Road
Richardson, Texas 75081
1-800-SAMSUNG
www.samsungusa.com/wireless
© 2003 Samsung Telecommunications America. Samsung is a registered
trademark of Samsung Electronics America, Inc. and its related entities.
Specifications subject to change without notice.
SGH
p705
Samsung mobile phones have been rated number
one in brand loyalty by consumers two years
in a row according to Brand Keys, a leading
independent authority on brand loyalty.
DAUL BAND GPRS Series
SGH-p705
Portable Digital Telephone
User Manual
Please read this manual before operating your phone,
and keep it for future reference.
Printed in Korea
Code No.: GH68-xxxxxA
wb_p705_101403_d2
Intellectual Property
All Intellectual Property, as defined below, owned by or which is
otherwise the property of Samsung or its respective suppliers
relating to the SAMSUNG Phone, including but not limited to,
accessories, parts, or software relating thereto (the “Phone
System”), is proprietary to Samsung and protected under
federal laws, state laws, and international treaty provisions.
Intellectual Property includes, but is not limited to, inventions
(patentable or unpatentable), patents, trade secrets,
copyrights, software, computer programs, and related
documentation and other works of authorship. You may not
infringe or otherwise violate the rights secured by the
Intellectual Property. Moreover, you agree that you will not (and
will not attempt to) modify, prepare derivative works of, reverse
engineer, decompile, disassemble, or otherwise attempt to
create source code from the software. No title to or ownership
in the Intellectual Property is transferred to you. All applicable
rights of the Intellectual Property shall remain with SAMSUNG
and its suppliers.
Samsung Telecommunications America
(STA), Inc.
Headquarters:
1301 E. Lookout Drive
Richardson, TX 75082
Tel: 972-761-7000
Fax: 972-761-7001
Customer Care Center:
1601 E. Plano Parkway
Suite 150
Plano, TX 75047
Tel: 888-987-HELP (4357)
Fax: 972-761-7501
Internet Address: http://www.samsungusa.com/
wireless
©2003 Samsung Telecommunications America. All rights
reserved. No reproduction in whole or in part allowed without
prior written approval. Samsung is a registered trademark of
Samsung Electronics America, Inc. and its related entities.
Table of Contents
1
Table of Contents
Important Safety Precautions......................... 7
Unpacking ...................................................... 9
Your Phone ................................................... 10
Phone Layout ........................................................ 10
Display ................................................................. 13
Service Light ......................................................... 16
Getting Started ............................................. 18
Installing the SIM Card ........................................... 18
Charging the Battery .............................................. 20
Turning the Phone On or Off .................................... 22
Call Functions ............................................... 25
Making a Call......................................................... 25
Adjusting the Volume ............................................. 27
Answering a Call .................................................... 27
Viewing Missed Calls............................................... 28
Quickly Switching to Silent Mode.............................. 30
Selecting Functions and Options................... 31
Phonebook.................................................... 33
Storing a Number with a Name ................................ 33
Using Phonebook Entry Options................................ 35
Searching for and Dialing a Number in Phonebook ...... 37
Editing a Caller Group............................................. 38
Speed-dialing ........................................................ 39
Deleting All of the Phonebook Entries........................ 40
Checking the Memory Status ................................... 41
Entering Text................................................ 42
Table of Contents
2
Changing the Text Input Mode ................................. 42
Using T9 Mode....................................................... 43
Using Alphabet Mode .............................................. 45
Using Number Mode ............................................... 46
Using Symbol Mode................................................ 47
Options During a Call.................................... 49
Putting a Call on Hold ............................................. 49
Using the Menu Functions ....................................... 50
Switching the Microphone Off (Mute) ........................ 50
Muting or Sending Key Tones................................... 51
Sending a Sequence of DTMF Tones ......................... 51
Searching for a Number in Phonebook ...................... 52
Call Waiting........................................................... 52
Making a Multi-party Call......................................... 53
Using the Menus ........................................... 55
Accessing a Menu Function by Scrolling..................... 55
Using Shortcuts ..................................................... 56
List of Menu Functions ............................................ 56
Text Messages .............................................. 62
Inbox
(Menu 1.1)
.................................................... 62
Outbox
(Menu 1.2)
.................................................. 63
Write New
(Menu 1.3)
............................................. 64
Templates
(Menu 1.4)
............................................. 66
Settings
(Menu 1.5)
................................................ 67
Delete All
(Menu 1.6)
.............................................. 68
Memory Status
(Menu 1.7)
....................................... 69
Voice Mail
(Menu 1.8)
.............................................. 69
Broadcast
(Menu 1.9)
.............................................. 69
Picture Messages.......................................... 71
Inbox
(Menu 2.1)
.................................................... 71
Outbox
(Menu 2.2)
.................................................. 74
Draft
(Menu 2.3)
..................................................... 75
Write New
(Menu 2.4)
............................................. 75
Templates
(Menu 2.5)
............................................. 79
Table of Contents
3
Delete All
(Menu 2.6)
.............................................. 80
Memory Status
(Menu 2.7)
....................................... 81
Call Records.................................................. 82
Missed Calls
(Menu 3.1)
........................................... 82
Incoming Calls
(Menu 3.2)
....................................... 82
Outgoing Calls
(Menu 3.3)
....................................... 83
Delete All
(Menu 3.4)
.............................................. 83
Call Time
(Menu 3.5)
............................................... 84
Television ..................................................... 85
TV
(Menu 4.1)
........................................................ 85
TV Image
(Menu 4.2)
.............................................. 88
Memory Status
(Menu 4.3)
....................................... 88
Sound Settings ............................................. 89
Ring Tone
(Menu 5.1)
.............................................. 89
Ring Volume
(Menu 5.2)
.......................................... 89
Alert Type
(Menu 5.3)
............................................. 89
Keypad Tone
(Menu 5.4)
.......................................... 90
Message Tone
(Menu 5.5)
........................................ 90
Folder Tone
(Menu 5.6)
........................................... 91
Power On/Off
(Menu 5.7)
......................................... 91
Extra Tones
(Menu 5.8)
........................................... 91
Phone Settings ............................................. 93
Display Settings
(Menu 6.1)
..................................... 93
Greeting Message
(Menu 6.2)
................................... 95
Own Number
(Menu 6.3)
......................................... 95
Language
(Menu 6.4)
.............................................. 96
Security
(Menu 6.5)
................................................ 96
Extra Settings
(Menu 6.6)
........................................ 96
Short Cut
(Menu 6.7)
.............................................. 97
Infrared Activate
(Menu 6.8)
.................................... 97
Reset Settings
(Menu 6.9)
........................................ 98
Organizer...................................................... 99
Alarm
(Menu 7.1)
................................................... 99
Table of Contents
4
Calendar
(Menu 7.2)
............................................. 100
Time & Date
(Menu 7.3)
........................................ 103
Calculator
(Menu 7.4)
............................................ 104
To Do List
(Menu 7.5)
............................................ 104
Voice Memo
(Menu 7.6)
......................................... 107
Currency Exchange
(Menu 7.7)
............................... 109
Network Services........................................ 111
Call Forwarding
(Menu 8.1)
.................................... 111
Call Waiting
(Menu 8.2)
......................................... 112
Network Selection
(Menu 8.3)
................................ 113
Caller ID
(Menu 8.4)
............................................. 114
Funbox ....................................................... 115
t-Zones
(Menu 9.1)
............................................... 115
Games
(Menu 9.2)
................................................ 120
Sounds
(Menu 9.3)
............................................... 122
Images
(Menu 9.4)
............................................... 123
Delete All
(Menu 9.5)
............................................ 123
Memory Status
(Menu 9.6)
..................................... 124
Solving Problems........................................ 125
Health and Safety Information ................... 128
Usage guidelines:
All about performance and safety ........................... 128
Maintaining Safe Use of and Access to Your Phone .... 130
Caring for the Battery........................................... 133
Acknowledging Special Precautions and FCC ............ 134
FDA Consumer Update.......................................... 135
CTIA Safety Information ....................................... 143
Owner's Record ................................................... 148
Table of Contents
6
Important Safety Precautions
7
Important Safety Precautions
Read these guidelines before using your wireless phone. Failure
to comply with them may be dangerous or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving; park the vehicle
first.
When Refuelling
Do not use the phone at a service station or near fuels or
chemicals.
In an Aircraft
Wireless phones can cause interference. Using them in an
aircraft is both illegal and dangerous.
In Hospitals
Switch your phone off near medical equipment. Follow any
regulations or rules in force.
Interference
All wireless phones may be subject to interference, which could
affect its performance.
Special Regulations
Meet any special regulations in force in any area and always
turn off your phone whenever it is forbidden to use it, or when it
may cause interference or danger.
Impor tant Safety Precautions
8
Sensible Use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone is turned
on.
Emergency Call
Ensure the phone is switched on and in service. Enter the
emergency number for your present location, then press the
key. You must deactivate any unnecessary features before you
can make an emergency call. Give all the necessary information
as accurately as possible. Do not end the call until given
permission to do so.
Water Resistance
Your phone is not water-resistant. Keep it dry.
Accessories and Batteries
Use only Samsung-approved accessories and batteries. Use of
any unauthorized accessories could damage your phone and
may be dangerous.
Qualified Service
Only qualified service personnel may repair your phone.
For more detailed safety information, see “Health and Safety
Information” on page 128.
Unpacking
9
Unpacking
Your package contains the following items:
You can obtain the following accessories for your phone from
your local Samsung dealer:
●
Standard batteries
●
Ear-microphone
●
Simple hands-free kit
●
Car holder
Handset Trave l Adap ter
Batteries Stereo
Ear-microphone
User’s Manual Hand Strap
Conversion Plug
Unpacking
10
●
Cigarette lighter adapter
●
Leather case
●
Travel charger/adapter
●
Battery charger
●
Battery case
●
Extended batteries
Your Phone
11
Your Phone
Phone Layout
The following illustrations show the main elements of your
phone:
Microphone
Folder
WAP Browser
key
Power on/off /
menu exit key
Volume/menu
browse keys
Soft key (left)
Dial/menu
confirmation key
IrDA port
Ear-microphone
jack Soft key (right)
Navigation (Up/Down/
Right/Left) keys
Cancel/
correction key
Earpiece
Display
Special
function keys
Alphanumeric
keys
TV key
Your Phone
12
Key
(s)
Description
In Menu mode, scroll through the menu options
and Phonebook.
In Idle mode, allows access to your favorite menu
options directly. For further details about
shortcuts, see page 97.
In Menu mode, the Left key returns to the
previous menu level and the Right key selects the
current menu.
When entering text, move the cursor to the left
and right respectively.
In Idle mode, the Left key enters the
Write New
menu and the Right key enters the
Voice Memo
menu.
(soft keys)
The soft keys perform the functions indicated by
the text above them, on the bottom line of the
display.
In Idle mode, launches the WAP (Wireless
Application Protocol) browser.
External display
Antenna
Service Light
Your Phone
13
Makes or answers a call.
In Idle mode, recalls the last number you dialed or
received when held down.
In Menu mode, selects a menu function or stores
information that you have entered, such as a
name in the phone or SIM memory.
Deletes characters from the display.
In Menu mode, returns to the previous menu
level.
Ends a call. Also turns the phone on and off when
held down.
In Menu mode, cancels your input and returns to
Idle mode.
Enters the
Television
menu. Also turns the TV on
when held down.
In Idle mode, quickly accesses your voice mail
when held down.
Enter numbers, letters and some special
characters.
Enters special characters.
Performs various functions.
Key
(s)
Description
(Continued)
Your Phone
14
Display
Display Layout
The display has three areas:
(on the left side of the phone)
During a call, adjusts the earpiece volume.
In Idle mode with folder open, adjusts the keypad
tone volume. With the folder closed, turns on the
backlight when held down.
In Menu mode, scrolls through the menu options
and Phonebook.
Area Description
First line Displays various icons. See page 16.
Middle lines Display messages, instructions and any
information that you enter, such as the
number you are dialing.
Key
(s)
Description
(Continued)
T-Mobile
Time Date
Menu Ph.Book
Icons area
Tex t an d
graphic area
Soft key
indicators area
Your Phone
15
Last line Shows the current functions assigned to the
two soft keys.
Area Description
Your Phone
16
Icons
Icon Description
Shows the received signal strength. The greater the
number of bars, the stronger the signal.
Appears when a call is in progress.
Appears when you are out of your service area. When
it displays, you cannot make or receive a call.
Appears when you are out of your home area and have
logged onto a different network; for example, when
travelling in other countries.
Appears when a new text message has been received.
Appears when a new voice mail message has been
received.
Appears when a new multimedia message has been
received.
Appears when you set an alarm to ring at a specified
time.
Appears when Silent mode is active or when you set
the
Alert Type
menu (
Menu 5.3
) so that the phone
vibrates when you receive a call. For further details,
see page 31 and page 89 respectively.
Appears when the IrDA port is active. For details, see
page 97.
Appears when Mute mode is active.
Your Phone
17
Backlight
The backlight illuminates the display and the keypad. When you
press any key or open the folder, the backlight turns on and
remains on for a given period of time, depending on your
setting in the
Back Light
menu. When no keys are pressed, the
display turns off after one minute to conserve your battery
power.
To specify the length of time the backlight is active, set the
Back Light
menu (
Menu 6.1.5
). See page 94 for further
details.
External Display
Your phone has an external display on the folder. It displays an
incoming call or a message. It also alerts you at the specified
time when you have set an alarm by turning on its backlight
and showing the corresponding icon on it.
The external display shows the current time and date on the
digital clock. You can change the display time and image in the
Front LCD
menu (
Menu 6.1.8
). See page 94 for further
details.
Service Light
The service light is below the display. It flashes when services
are available on the phone.
Shows the level of your battery. The more bars you
see, the more power you have remaining.
Icon Description
(Continued)
Getting Started
19
Getting Started
Installing the SIM Card
When you subscribe to a cellular network, provided is a plug-in
SIM card loaded with your subscription details, such as your
PIN, and any optional services available.
Important!
The plug-in SIM card and its contacts can be
easily damaged by scratches or bending, so be
careful when inserting or removing the card.
Keep all SIM cards out of the reach of small
children.
To install the SIM card, use the following steps:
1. If necessary, turn off the phone by holding down the
key until the power-off image displays.
2. Remove the battery. To do so:
➀
Press the battery lock and hold it in that position.
➁
Slide the battery and lift it away, as shown.
3. Slide the SIM card into the SIM card socket so that it locks
the card into position.
Getting Started
20
Make sure the gold contacts of the card face into the phone.
Note:
When you need to remove the SIM card, slide it upwards, as
shown, and take it out of the socket.
Getting Started
21
4. Replace the battery, taking care to match the tabs on the
battery with the grooves on the phone.
5. Slide the battery towards the top of the phone until it clicks
into place. Make sure that the battery is properly installed
before switching the power on.
Charging the Battery
Your phone is powered by a rechargeable Li-ion battery. A
travel adapter comes with your phone for charging the battery.
Use only approved batteries and chargers. Ask your local
Samsung dealer for further details.
The travel adapter allows you to use the phone while the
battery is charging, but this causes the phone to charge slower.
Getting Started
22
Note:
You MUST fully charge the battery before using your phone for the
first time. A discharged battery is fully recharged in approximately
200 minutes.
1. With the battery in position on the phone, plug the
connector of the travel adapter into the jack at the bottom
of the phone.
2. Plug the adapter into a standard AC wall outlet.
3. When charging is finished, unplug the adapter from the
power outlet and disconnect it from the phone by pressing
Getting Started
23
the gray tabs on both sides of the connector and pulling the
connector out.
Note:
You must unplug the adapter before removing the battery from
the phone during charging; otherwise, the phone could be
damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time
remain, a warning tone sounds and a message repeats at
regular intervals on the display. When this happens, your phone
turns off the backlight to conserve the remaining battery power.
When the battery level becomes too low, the phone
automatically turns off.
Turning the Phone On or Off
1. Open the folder.
2. Press and hold the key until the phone turns on.
3. If the phone asks you to enter a password, enter the
password and press the
OK
soft key. The phone password is
Getting Started
24
preset to “00000000” at the factory. If the phone asks for a
PIN, enter the PIN and press the
OK
soft key.
The phone searches for your network and, after finding it,
the idle screen appears on the display. Now, you can make
or receive a call.
4. When you wish to switch the phone off, press and hold the
key until the power-off image displays.
Getting Started
25
Call Functions
26
Call Functions
Making a Call
When the idle screen displays, enter the area code and phone
number, and then press the key.
Note:
When you activate the
Auto Redial
option in the
Extra Settings
menu (
Menu 6.6
), the phone automatically redials up to ten
times when the person does not answer the call or is already on
the phone. See page 96 for further details.
Making an International Call
1. From the Idle screen press and hold the
0
key until the
+
character appears.
2. Enter the country code, area code and phone number and
press the key.
Correcting the Number
To clear Press the
the last digit
displayed
C
key.
any other digit in
the number
Left or Right key until the cursor is
immediately to the right of the digit to be
cleared. Press the
C
key. You can also
insert a missing digit simply by pressing
the appropriate key.
the whole display
C
key and hold it for more than one
second.
Call Functions
27
Ending a Call
When you want to end your call, briefly press the key.
Redialing the Last Number
The phone stores the numbers you have dialed, received or
missed if the caller is identified. See “Call Records” on page 82
for further details.
To recall any of these numbers:
1. If you have typed characters on the display, press the
key to return to Idle mode.
2. Press the key to display a list of the last numbers in the
order you made or received them.
3. Use the Up and Down keys to scroll through the numbers
until the number you want highlights.
Making a Call from Phonebook
You can store the phone numbers that you use regularly in the
SIM card or the phone’s memory, which are collectively called
Phonebook. Simply select a name to recall the associated
number. For further details about the Phonebook features, see
page 34.
4. T
o Press the
place the call key.
edit the number
Options
soft key and select
Edit
.
delete the number
Options
soft key and select
Delete
.
delete all of the
numbers on the Call
Log list
Options
soft key and select
Delete
All
. When a confirming message
displays, press the
Yes
soft key.
Call Functions
28
Adjusting the Volume
During a call, if you want to adjust the earpiece volume, use the
Volume keys on the left side of the phone.
Press the key to increase the volume and the key to
decrease the volume.
In Idle mode with the folder open, you can also adjust the
keypad tone volume using these keys.
Answering a Call
When somebody calls you, the phone rings and displays the
incoming call image.
When the caller can be identified, the caller’s phone number or
name, if stored in your Phonebook, displays.
1. If necessary, open the folder. Press the key or the
Accept
soft key to answer the incoming call.
When the
Anykey Answer
option in the
Extra Settings
menu (
Menu 6.6
) is activated, you can press any key to
answer a call except for the key and the
Reject
soft
key. See page 96.
Call Functions
29
When the
Active Folder
option in the
Extra Settings
menu
(
Menu 6.6
) is activated, you can answer the call simply by
opening the folder. See page 96.
Note
: To reject the call, press and hold one of the Volume keys, or
press the
Reject
soft key or key.
2. End the call by closing the folder or pressing the key.
Note:
You can answer a call while using Phonebook or menu features.
After ending the call, the phone returns to the function screen you
were using.
Viewing Missed Calls
If you are unable to answer a call, you can find out who is
calling you so that you can call the person back.
The number of calls you missed displays on the idle screen
immediately after a call is missed.
To view the missed call immediately:
1. If the phone is closed, open the folder.
2. Press the
View
soft key.
The number for the most recent missed call displays, if
available.
3.
To Press the
scroll through the missed
calls
Up or Down key.
call the number displayed key.
edit or delete a missed
call number
Select
soft key. See below.
Call Functions
30
Editing a Missed Call Number
Note:
When the number for the missed call is not available, the
Edit
option does not display.
1. Press the
Options
soft key.
2.
Press the Up or Down key to highlight the
Edit
option.
3. Press the
Select
soft key.
4. Change the number.
Deleting a Missed Call
1. Press the
Options
soft key.
2. If necessary, press the Up or Down key to highlight the
Delete
option.
3. Press the
Select
soft key.
You can press the key at any time to exit the Missed Call
feature.
Note:
You can access the Missed Call feature at any time by selecting
the
Missed Calls
menu (
Menu 3.1
). For further details, see
page 82.
5.
To Press the
call the number key.
store the number
Save
soft key and enter the name
and location. For further details,
see page 34.
Call Functions
31
Quickly Switching to Silent Mode
In Idle mode, press and hold the
key until the “Silent Mode”
message and the Vibration icon ( ) display.
In Silent mode, your phone changes the sound settings as
follows:
To exit and reactivate the previous sound settings, in Idle mode
press and hold the
key again until “Exit Silent Mode”
appears. The Vibration icon ( ) no longer displays.
Option New Setting
Alert Type (
Menu 5.3
)Vibration
Keypad Tone (
Menu 5.4
)Off
Message Tone (
Menu 5.5
)Vibration
Folder Tone (
Menu 5.6
)Off
Power On/Off Tone (
Menu 5.7
)Off
Extra Tones (
Menu 5.8
)Off
Selecting Functions and Options
32
Selecting Functions and
Options
Your phone offers a set of functions that allows customization.
These functions are arranged in menus and sub-menus,
accessed using the two soft keys marked and . Each
menu and sub-menu allows you to view and alter the settings of
a particular function.
The roles of the soft keys vary according to the function you are
currently using; the labels on the bottom line of the display just
above each key indicates its current role.
Example:
Press the left soft key
to access Menu Mode.
Press the right soft
key to access the
Phonebook features.
Selecting Functions and Options
33
To view the various functions and options available and to
select the one you want:
1. Press the appropriate soft key.
In some functions, you may be asked for a password or PIN.
Enter the code and press the
OK
soft key.
Note:
When you access a list of options, your phone highlights the
current option. If, however, there are only two options, such as
On
/
Off
or
Enable
/
Disable
, your phone highlights the option that
is not currently active so that you can select it directly.
2.
To Press the
select the:
• function displayed
• option highlighted
Select
soft key or
the Right key.
view the next function or
highlight the next option
on a list
Down key or the key
on the left side of the
phone.
move back to the previous
function or option on a list
Up key or the key on
the left side of the phone.
move back up one level in
the structure
Left key, soft key or
C
key.
exit the structure without
changing the settings
key.
Phonebook
34
Phonebook
You can store phone numbers and their corresponding names in
both your SIM card and your phone’s memories. They are
physically separate but are used as a single entity, called
Phonebook.
Storing a Number with a Name
There are two ways to store a number:
●
Using the
Save
soft key in Idle mode
●
Using the
New Entry
option in the Phonebook menu
Storing a Number in Idle Mode
As soon as you start to enter a number,
Save
appears above
the left soft key to allow you to store the number in Phonebook.
1. Enter the number you want to store.
Note:
If you make a mistake while entering a number, correct it
using the
C
key. For further details, see page 26.
2. When you are sure that it is correct, press the
Save
soft
key.
3. Select the category of the number to be stored. Three
categories are available:
• Mobile Number
• Office Number
• Home Number
To select the category, press the Left or Right key and press
the
Select
soft key.
Phonebook
35
4. Select a memory location, either
SIM
or
Phone
, by pressing
the Up or Down key and press the
Select
soft key.
Note
: When you change phones, any numbers stored in your SIM
card memory are automatically available with the new phone,
whereas any numbers stored in the phone’s memory must be
reentered.
5. Enter a name and press the
OK
soft key.
For the phone’s memory, you can enter up to 20 characters.
For the SIM memory, the maximum length you can enter for
a name depends on your SIM card. For further details about
how to enter characters, see page 43.
6. If you do not want to save the number and name in the
suggested location, press the
C
key to clear the location
number and enter another location by pressing the number
keys.
7. Press the
OK
soft key to store the name and number.
After storing, the phone displays the Phonebook entry or
name you just created.
Storing a Number Using the Phonebook Menu
1. When the idle screen displays, press the
Ph.Book
soft key.
2. Scroll to
New Entry
by pressing the Up or Down key and
press the
Select
soft key.
8.
To Press the
use the entry options
Options
soft key. For further
details, see page 36.
return to the idle screen key.
Phonebook
36
3. Select the category of the number to be stored by pressing
the Left or Right key, and press the
Select
soft key.
Note:
E-mail Address
is available in this step. It allows you to save
an e-mail address instead of a phone number.
4. Select a memory location, either
SIM
or
Phone
, by pressing
the Up or Down key and press the
Select
soft key.
Note:
When you are saving an e-mail address,
SIM
is not available.
5. Enter a name and press the
OK
soft key.
For the phone’s memory, you can enter up to 20 characters.
For the SIM memory, the maximum length you can enter for
a name depends on your SIM card. For further details about
how to enter characters, see page 43.
6. Enter the number or e-mail address you want to store and
press the
Save
soft key.
7. Continue the procedure from step 6 on page 35 to store the
number.
Using Phonebook Entry Options
While accessing any Phonebook entry, press the
Options
soft
key to access the options for the entry.
The following options are available:
To Press the
select the highlighted
option
Select
soft key or the Right key.
highlight a different
option
Up or Down key until the option you
want highlights.
Phonebook
37
Paste
: allows you to paste the number into the normal dialing
mode. Use this option to dial a number similar to one in
Phonebook, such as a different extension in the same office.
Use the
C
key to change the number as required; see page 26
for further details. When you are ready to dial, press the
key.
Edit
: allows you to edit the name and number.
Select
One Entry
to change the name and/or one number for
the selected entry. If you change the name, the number is
saved separately with the new name.
Select
All Entry
to change only the name of the entry.
Delete
: allows you to delete the selected number from
Phonebook. You are asked to confirm that you wish to delete
the name and number by pressing the
Yes
soft key.
Copy
: allows you to copy the number to another location. You
can select the memory and the location number.
Caller Group
: allows you to organize your Phonebook entries
in caller groups so that the phone alerts you in a specific way
when a person from one of your groups calls you. Select one of
the ten groups available.
To remove an entry from a group, select the
No Group
option.
For further details about how to change caller group properties,
see page 39.
Add Entry
: allows you to add a new number to the currently
selected name.
Phonebook
38
Searching for and Dialing a Number in
Phonebook
After storing numbers in Phonebook, you can search for them in
two ways; by name and by caller group.
Searching for a Number by Name
1. When the idle screen displays, press the
Ph.Book
soft key.
2. Press the
Select
soft key when
Search
highlights. You are
asked to enter a name.
3. Enter the first few letters of the name that you want to find.
The Phonebook entries are listed, starting with the first
entry matching your input.
5. Once you have found the entry, press the key to dial the
number, or press the
Options
soft key to access the
Phonebook entry options; for further details, see page 36.
Searching for a Number by Caller Group
1. When the idle screen displays, press the
Ph.Book
soft key.
2. Scroll to
Group Search
by pressing the Up or Down key and
press the
Select
soft key. You are asked to enter a group
name.
4.
To Press the
view the highlighted entry
View
soft key.
select a different entry Up or Down key until the entry
highlights.
look for a name starting
with a different letter
key labeled with the letter you
want.
Phonebook
39
3. Enter the first few letters of the group name that you want
to find.
The caller groups are listed, starting with the first group
matching your input.
4. If necessary, scroll to a group by pressing the Up or Down
key and press the
View
soft key.
The Phonebook entries in the caller group are listed.
6. Once you have found the entry, press the key to dial the
number, or press the
Options
soft key to access the
Phonebook entry options; for further details, see page 36.
Editing a Caller Group
1. When the idle screen displays, press the
Ph.Book
soft key.
2. Scroll to
Group Edit
by pressing the Up or Down key and
press the
Select
soft key.
3. Scroll through the group list by pressing the Up or Down
key.
4. When the group you want highlights, press the
Options
soft
key.
5. Select each option and change the settings, as you want.
The following options are available:
•
Call Ring Tone
: allows you to set a ring tone to be used
when you receive a call from a person in the group.
5.
To Press the
view the highlighted entry
View
soft key.
select a different entry Up or Down key until the
entry you want highlights.
Phonebook
40
•
SMS Tone
: allows you to set a ring tone to be used when
you receive a message from a person in the group.
•
Graphic
: allows you to set a graphic icon to be displayed
when you receive a call from a person in the group.
•
Group Name
: allows you to assign a name to the group.
For further details about how to enter characters, see
page 43.
6. When you are finished, press the
C
or key.
Speed-dialing
Once you have stored phone numbers in Phonebook, you can
set up to eight speed-dial entries by pressing the associated
number key.
Setting Up Speed-dial Entries
1. When the idle screen displays, press the
Ph.Book
soft key.
2. Scroll to
Speed Dial
by pressing the Up or Down key and
press the
Select
soft key.
3. Select the key to which you wish to assign the speed-dialing
number, from the
2
to
9
keys, and press the
OK
soft key.
Note:
Memory location 1 is reserved for your Voice Mail server
number.
If you have already assigned a number to the key, the
Options
soft key replaces the
OK
soft key. Go to step 6.
4. Select a Phonebook entry from the list and press the
View
soft key.
5. Select a number, if the entry has more than one, by
pressing the Up or Down key and press the
Select
soft key.
Phonebook
41
6. Once you have assigned a number to the key, you can use
the following options by pressing the
Options
soft key:
•
Change
: allows you to assign a different number to the
key.
•
Delete
: allows you to clear the setting so that no number
is assigned to the key.
•
Delete All
: allows you to clear the settings for all keys so
that no numbers are assigned to any of the keys.
•
Number
: allows you to view the number assigned to the
key.
7. When you are finished, press the
C
or key.
Speed-dialing from Phonebook
To speed-dial the numbers assigned to keys
2
to
9
, press and
hold the appropriate key.
Deleting All of the Phonebook Entries
You can delete all of entries in the selected memory or both
memories.
1. When the idle screen displays, press the
Ph.Book
soft key.
2. Scroll to
Delete All
by pressing the Up or Down key and
press the
Select
soft key.
3. To place a check mark by the memory you want to empty,
All
,
SIM
or
Phone
, press the
Mark
soft key.
You can remove the check mark by pressing the
Unmark
soft key.
4. When you are finished marking, press the
Delete
soft key to
delete the entries in the selected memory.
5. Enter the phone password and press the
OK
soft key.
Phonebook
42
Note
: The password is preset to “00000000” at the factory. To
change this password.
6. When the confirming message appears, press the
Yes
soft
key.
To cancel the deletion, press the
No
soft key.
7. When you are finished, press the
C
or key.
Checking the Memory Status
You can check how many names and numbers are stored in
Phonebook, in both the SIM card and phone memories. You can
also see the capacity of both memories.
1. When the Idle screen displays, press the
Ph.Book
soft key.
2. Select the
Memory Status
option by pressing the Up or
Down key and press the
Select
soft key.
3. Press the Up or Down key to view the number of existing
and remaining entries available in the SIM card and phone’s
memory.
4. When you are finished, press the
C
or key.
Entering Text
43
Entering Text
Your phone provides the ability to enter text, such as when
storing a name in Phonebook, creating your personal greeting
or scheduling events on your calendar. You can enter
alphanumeric characters by using your phone’s keypad.
Your phone has the following text input modes:
●
T9 mode
This mode allows you to enter words with only one keystroke
per letter. Each key on the keypad has more than one letter;
for example, when you press the
5
key once, J, K or L
displays. T9 mode automatically compares your keystrokes
with an internal linguistic dictionary to determine the correct
word, thus requiring far fewer keystrokes than the traditional
Alphabet mode.
●
Alphabet mode
This mode allows you to enter letters by pressing the key
labeled with the letter you want. Press the key to enter once,
twice, three or four times until it displays.
●
Number mode
This mode allows you to enter numbers.
●
Symbol mode
This mode allows you to enter various symbols and special
characters.
Changing the Text Input Mode
When you are in a field that allows characters to be entered,
you will notice the text input mode indicator on the display.
Entering Text
44
Example: Writing a text message
Using T9 Mode
T9 ia a predictive text input mode that allows you to key in any
character using single keystrokes. This text input mode is based
on a built-in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word by pressing
the
2
to
9
keys. Press each key only once for each letter.
Example: To enter “Hello” in T9 mode, press the
4
,
3
,
5
,
5
and
6
keys.
To select Press the right soft key
until
T9 mode displays. See page 44.
Alphabet mode displays. See page 46.
Number mode displays. See page 47.
Symbol mode the symbol list displays.
See page 48.
Tex t i np u t
mode indicator
Entering Text
45
The word that you are typing appears on the display. It may
change with each key that you press.
2. Enter the whole word before editing or deleting the
keystrokes.
3. When the word displays correctly, go to step 4.
If not, press the
0
key or the Up or Down key repeatedly to
display alternative word choices for the keys that you have
pressed.
Example: Both “Of” and “Me” use the
6
and
3
keys. The
phone displays the most commonly used choice
first.
4. Put a space by pressing the key and start entering the
next word.
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the word you want
to add, press the
0
or Down key to display the alternative
words.
2. When you press the
0
or Down key at the last alternative
word, the display shows
Add
on the bottom line. Press the
Add
soft key.
3. If necessary, clear the word using the
C
key and enter the
word you want to add using Alphabet mode. See page 46.
4. Press the
OK
soft key.
The word is added to the T9 dictionary and becomes the first
word for the associated keypress.
●
To enter periods, hyphens or apostrophes, press the
1
key.
T9 mode applies grammar rules to ensure that the correct
punctuation is used.
Entering Text
46
Example: The
1
key is used twice to display two punctuation
marks:
●
To shift the case in T9 mode, use the key. There are
three cases; Lower case ( ), Initial Capital ( ) and
Capital lock ( ).
●
You can move the cursor by using the Left and Right keys.
To delete letters, press the
C
key. Press and hold the
C
key
to clear the display.
Using Alphabet Mode
Use the
1
to
0
keys to enter your text.
1. Press the keys labeled with the letter you want:
- Once for the first letter
- Twice for the second letter
- And so on
2. Select the other letters in the same way.
Note:
The cursor moves to the right when you press a different key.
When entering the same letter twice or a different letter on the
same key, just wait for a few seconds for the cursor to move to
the right automatically, and then select the next letter.
L e t ’ s e a t .
Entering Text
47
Refer to the table below for further details about the characters
available:
●
To insert a space, press the key.
●
To shift the case in Alphabet mode, use the key. There
are three cases; Lower case ( ), Initial Capital ( ) and
Capital lock ( ).
●
You can move the cursor using the Left and Right keys. To
delete letters, press the
C
key. Press and hold the
C
key to
clear the display.
Using Number Mode
Number mode enables you to enter numbers into a text
message. Press the keys corresponding to the digits you want
to enter.
Entering Text
48
Using Symbol Mode
Symbol mode enables you to insert symbols into a text
message.
To Press the
select a symbol corresponding number key.
display more symbols Up or Down key.
clear the symbol(s)
C
key. When the input field is
empty, this key returns the screen
to the previous mode.
insert the symbol(s) into
your message
OK
soft key.
cancel your input and return
to the previous mode
Back
soft key.
Options During a Call
49
Options During a Call
Your phone provides a number of control functions that you can
use during a call.
Putting a Call on Hold
If your network supports this service, you can place the current
call on hold and make another call at any time.
To place a call on hold, simply press the
Hold
soft key. You can
reactivate the call whenever you want, by pressing the
Unhold
soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or look it up in
Phonebook.
For details about searching for a number in Phonebook, see
page 38.
2. Press the key to dial the second call.
The first call is automatically put on hold.
Or,
1. Put the current call on hold by pressing the
Hold
soft key.
2. Make the second call in the normal way.
When you have an active call and a call on hold, you may switch
between the two calls, changing the one on hold to active and
placing the other on hold.
To switch between the two calls, simply press the
Swap
soft
key.
The current call is placed on hold and the call on hold is
reactivated so that you can continue conversing with the other
person.
Options During a Call
50
When you want to finish, end each call normally by pressing the
key.
Using the Menu Functions
During a call, you can access the main menu functions.
1. Press the
Options
soft key.
2. Press the
OK
soft key when the
Menu
option highlights.
3. Press the Up or Down key to scroll through the menu list.
Note:
You cannot use some menus during a call. They are
deactivated on this list.
4. When the menu you want highlights, press the
Select
soft
key.
5. If the selected menu has sub-options, repeat steps 3 and 4.
For further details about the menu functions available, see the
list on page 56.
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s microphone off so that
the other person on the phone cannot hear you.
To switch the microphone off temporarily:
1. Press the
Options
soft key.
2. Press the Down key to highlight the
Mute
option.
3. Press the
OK
soft key.
The other person can no longer hear you.
To switch the microphone back on:
1. Press the
Options
soft key.
Options During a Call
51
2. Press the Down key to highlight the
Unmute
option.
3. Press the
OK
soft key.
The other person can hear you again.
Muting or Sending Key Tones
These options allow you to turn the key tones off or on. If the
Mute Keys
option is selected, your phone does not transmit
the DTMF (Dual Tone Multi-Frequency) tones of the keys,
which allows you to press keys without hearing key tones
during a call.
Note:
To communicate with answering machines or computerized
telephone systems, the
Send
Keys
option must be selected.
Sending a Sequence of DTMF Tones
You can send the DTMF tones after entering the entire
number you need to send.
This option is helpful for entering a password or an account
number when you call an automated system, like a banking
service.
To send the DTMF tones:
1. When you are connected to the teleservice system, press
the
Options
soft key.
2. Press the Down key to highlight the
Send DTMF
option.
3. Press the
OK
soft key.
4. Enter the number you want to send and press the
OK
soft
key.
The tones are sent.
Options During a Call
52
Searching for a Number in Phonebook
You can search for a number in Phonebook during a call.
1. Press the
Options
soft key.
2. Press the Down key to highlight the
Phonebook
option.
3. Press the
OK
soft key.
The Phonebook entries are listed.
4. Enter the name that you wish to find.
If you enter the first few letters of the name, the Phonebook
entries are listed, starting with the first entry matching your
input.
5. To view the highlighted entry, press the
View
soft key.
For further details about the Phonebook feature, see page 34.
Call Waiting
You can answer an incoming call while you have a call in
progress, if your network supports this service and you have
set the
Call Waiting
menu (
Menu 8.2
) to
Activate
; see
page 112. You are notified of an incoming call by a call waiting
tone.
To answer a call while you have a call in progress:
1. Press the key to answer the incoming call. The first call
is automatically put on hold.
2. To switch between the two calls, press the
Swap
soft key.
3. To end the call on hold, press the
Options
soft key and
select the
End Held Call
option.
To end the current call, press the key.
Options During a Call
53
Making a Multi-party Call
A multi-party call is a network service that allows up to six
people to take part simultaneously in a multi-party or
conference call. For more information about subscribing to this
service, contact your service provider.
Setting up the Multi-party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The first call
is automatically put on hold.
3. To join the first participant to the multi-party call, press the
Options
soft key and select the
Join
option. Press the
OK
soft key.
4. To add a new person to the multi-party call, call the person
in the normal way and press the
Options
soft key. Select
the
Join
option and press the
OK
soft key.
You can add incoming callers by answering the call, pressing
the
Options
soft key, and selecting the
Join
option. Repeat as
required.
Having a Private Conversation With One
Participant
1. Press the
Options
soft key and choose the
Select One
option. Press the
OK
soft key.
The list of call participants appears.
2. Highlight a person from the list by pressing the Up or Down
key, and press the
Select
soft key or the key.
3. When the
Private
option highlights, press the
OK
soft key.
Now you can talk privately to that person. The other
participants can still converse with each other.
Options During a Call
54
4. To return to the multi-party call, press the
Options
soft key
and select the
Join
option. Press the
OK
soft key.
All the multi-party call participants can now hear each other.
Dropping One Participant
1. Press the
Options
soft key and choose the
Select One
option. Press the
OK
soft key.
The list of call participants appears.
2. Highlight a person from the list by pressing the Up or Down
key, and press the
Select
soft key or the key.
3. Press the Down key to select the
Remove
option and press
the
OK
soft key.
The call ends with that participant, but you can continue to
talk to the others.
4. When you want to end the multi-party call, press the
key.
Using the Menus
55
Using the Menus
The phone offers a range of functions that allow you to tailor it
to your needs. These functions are arranged in menus and sub-
menus.
The menus and sub-menus can be accessed by scrolling using
the Navigation keys or by using the shortcuts.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the
Menu
soft key to access Menu
mode.
2. Scroll using the Up or Down key to reach a main menu,
Phone Settings
for example. Press the
Select
soft key or
the Right key to enter the menu.
3. If the menu contains sub-menus,
Language
for example,
you can access them by scrolling using the Up or Down key
and pressing the
Select
soft key or the Right key.
If the menu that you have selected contains further options,
repeat this step.
4.
To Press the
scroll through the menus Up or Down key, or use the
Volume keys.
confirm the chosen setting
Select
soft key or the Right
key.
return to the previous menu
level
soft key or the Left key.
exit the menu without
changing the settings
key.
Using the Menus
56
Using Shortcuts
The menu items, such as menu, sub-menus and options, are
numbered and can be accessed quickly by using their shortcut
numbers. The shortcut number is shown at the bottom right
next to the soft key on the display. Simply press the
Menu
soft key and enter the number of the menu you want.
Note:
The numbers assigned to each menu are indicated on the list on
page 56. They may not match the menu number on the phone,
depending on the services supported by your SIM card.
Example: Accessing the
Language
menu.
1. Press the
Menu
soft key.
2. Press the
6
key for
Phone Settings
.
3. Press the
4
key for
Language
.
The languages available display.
List of Menu Functions
The following list shows the menu structure available and
indicates the number assigned to each option and the page
where you can find a description of each feature.
Note:
If you use a SIM AT card that provides additional services, the
SIM AT
menu displays when you press the
Menu
soft key to
enter Menu mode. For further details, see your SIM card
instructions.
1. Text Messages
(see page 62)
1.1 Inbox
1.2 Outbox
1.3 Write New
1.4 Templates
1.5 Settings
1.5.1 T-Mobile
*
Using the Menus
57
1.5.1.1 Service Center
1.5.1.2 Default Destination
1.5.1.3 Default Type
1.5.1.4 Default Validity
1.5.1.5 Setting Name
1.5.2 Setting 2
*
1.5.3 Setting 3
*
1.5.4 Setting 4
*
1.5.5 Common Setting
1.6 Delete All
1.7 Memory Status
1.7.1 SIM Memory
1.7.2 PHONE Memory
1.7.3 CB Memory
1.8 Voice Mail
1.8.1 Connect to Voice Server
1.8.2 Voice Server Number
1.9 Broadcast
2. Picture Messages
(see page 71)
2.1 Inbox
2.2 Outbox
2.3 Draft
2.4 Write New
2.5 Templates
2.6 Delete All
2.7 Memory Status
* Shows only if supported by your SIM card.
Using the Menus
58
3. Call Records
(see page 82)
3.1 Missed Calls
3.2 Incoming Calls
3.3 Outgoing Calls
3.4 Delete All
3.5 Call Time
3.5.1 Last Call
3.5.2 Total Outgoing
3.5.3 Total Incoming
3.5.4 Reset Timers
4. Television
(see page 85)
4.1 TV
4.1.1 Channel
4.1.2 Display
4.1.3 Timer
4.2 TV Image
4.3 Memory Status
5. Sound Settings
(see page 89)
5.1 Ring Tone
5.2 Ring Volume
5.3 Alert Type
5.4 Keypad Tone
5.5 Message Tone
5.5.1 SMS Tone
5.5.2 SMS-CB Tone
5.6 Folder Tone
5.6.1 Off
5.6.2 Future
5.6.3 Crystal
5.7 Power On/Off
5.7.1 Off
5.7.2 Classical
5.7.3 Cheerful
5.8 Extra Tones
5.8.1 Error Tone
Using the Menus
59
5.8.2 Minute Minder
5.8.3 Connect Tone
6. Phone Settings
(see page 93)
6.1 Display Settings
6.1.1 Wallpaper
6.1.2 Power On
6.1.3 Power Off
6.1.4 Menu Style
6.1.5 Back Light
6.1.6 Service Light
6.1.7 Graphic Logo
6.1.8 Front LCD
6.2 Greeting Message
6.3 Own Number
6.4 Language
6.5 Security
6.6 Extra Settings
6.7 Short Cut
6.7.1 Key Up
6.7.2 Key Down
6.8 Infrared Activate
6.9 Reset Settings
7. Organizer
(see page 99)
7.1 Alarm
7.1.1 Once Alarm
7.1.2 Daily Alarm
7.1.3 Morning Call
7.1.4 Remove Alarm
7.1.5 Autopower
7.2 Calendar
7.3 Time & Date
7.3.1 Set Time
7.3.2 Set Date
7.3.3 World Time
7.3.4 Time Format
7.4 Calculator
Using the Menus
60
7.5 To Do List
7.6 Voice Memo
7.6.1 Record
7.6.2 Memo List
7.6.3 Delete All
7.6.4 Memory Status
7.7 Currency Exchange
8. Network Services
(see page 111)
8.1 Call Forwarding
8.1.1 Forward Always
8.1.2 Busy
8.1.3 No Reply
8.1.4 Unreachable
8.1.5 Cancel All
8.2 Call Waiting
8.2.1 Voice Calls
8.2.2 Data Calls
8.2.3 Cancel All
8.3 Network Selection
8.3.1 Automatic
8.3.2 Manual
8.4 Caller ID
8.4.1 Default
8.4.2 Hide Number
8.4.3 Send Number
9. Funbox
(see page 115)
9.1 t-zones
9.1.1 Home
9.1.2 Favorite
9.1.3 Go To URL
9.1.4 Clear Cache
9.1.5 Push Message
9.2 Games
9.3 Sounds
9.4 Images
Using the Menus
61
9.5 Delete All
9.6 Memory Status
9.6.1 Games
9.6.2 Sounds & Images
Text Messages
62
Text Messages
Short Message Service (SMS) allows you to send and receive
short text messages to and from other GSM mobile phones. In
addition, your phone supports the Enhanced Messaging Service
(EMS), which enables you to include simple pictures, melodies,
and animated images in your messages. To use this feature,
you must subscribe to your service provider’s message service.
When the Message icon ( ) appears, you have received new
text messages. If the memory is full, an error message displays
and you cannot receive any new messages. Use the
Delete
option in each message box to delete the obsolete ones.
Inbox
(Menu 1.1)
This message box is used to store the messages that you have
received.
When you enter this menu, the list of messages in the box
displays with the senders’ phone numbers or names, if available
in your Phonebook.
1. Select a message from the list and press the
View
soft key
to read the message contents.
2. To scroll through the contents, press the Up or Down key.
3. To scroll to the previous or next message, press the or
key.
While reading a message, you can choose the following options
by pressing the
Options
soft key:
Delete
: allows you to delete the message.
Forward
: allows you to send/forward the message. For further
details about how to send a message, see page 64.
Text Messages
63
Text Reply
: allows you to reply to the sender by sending a
text message.
Call Back
: allows you to call the sender back.
Cut Address
: allows you to extract the sender’s number and
URL, e-mail addresses or phone numbers from the message
text.
Move to Phone
: allows you to move the message from the
SIM card to the phone’s memory. This option is only available
when you select a message stored in the SIM card.
Select Objects
: allows you to save media objects, such as
sounds or images, from the message into your phone. You
can use the objects when writing a message. For details, see
page 65.
Outbox
(Menu 1.2)
This message box is used to store the messages that you
have already sent or will send.
When you enter this menu, the list of messages in the box
displays with the recipients’ phone numbers or names, if
available in your Phonebook.
1. Select a message from the list and press the
View
soft
key to read the message contents.
2. To scroll through the contents, press the Up or Down key.
3. To scroll to the previous or next message, press the or
key.
While reading as message, you can choose the following
options by pressing the
Options
soft key:
Delete
: allows you to delete the message.
Text Messages
64
Send
: allows you to send/resend the message. For further
details about how to send a message, see page 64.
Cut Address
: allows you to extract the destination number and
URL, e-mail addresses or phone numbers from the message
text.
Move to Phone
: allows you to move the message from the SIM
card to the phone memory. This option is only available when
you select a message stored in the SIM card.
Select Objects
: allows you to save media objects, such as
sounds or images, from the message into your phone. You can
use the objects when writing a message. For details, see
page 65.
Write New
(Menu 1.3)
In this menu, you can write and send a text message.
Note:
When you add media objects to the message, the number of
characters you can enter decreases.
Creating a Simple Text Message
1. Create your message.
Note
: For further details about entering characters, see page 43.
2. When you finish entering the message, press the
Options
soft key. The following options are available:
•
Send Only
: allows you to send the message. The
message is deleted after sending.
•
Save and Send
: allows you to save a copy of the
message and then send the message. You can read the
message in your Outbox.
•
Save Only
: allows you to save the message so that it can
be sent later. You can read the message in your Outbox.
Text Messages
65
• For further details about
Text Formatting
,
Add Objects
,
Add Templates
,
Add
Phonebook
,
Add Bookmark
and
Language
options, see page 65.
3. Select
Send Only
or
Save and Send
, and press the
Select
soft key.
If you want to just save the message, select
Save Only
.
After saving the message, the phone returns to the
Text
Messages
menu.
4. If you select a save option, choose the memory location and
press the
OK
soft key.
5. Enter a destination number and press the
OK
soft key.
The message is sent.
Note:
If the phone fails to send the message, it will ask you if you want
to retry. Press the
OK
soft key to confirm. Otherwise, press the
Exit
soft key to return to the Write New screen.
Creating a Message Using the Options
1. Create a message.
2. Press the
Options
soft key.
3. Select one of the following options by using the Up and
Down keys and pressing the
Select
soft key:
•
Text Formatting
: allows you to format the style of the
text.
For the
Size
attribute,
Normal
,
Large
and
Small
sizes
are available. For the
Underline
and
Strikethrough
attributes, select
On
or
Off
.
These attributes can be combined.
•
Add Objects
: allows you to add a sound, melody, picture
or animated image to the message. Select the category of
Text Messages
66
the object to be added. In each category, you can select
from the various factory-set items or choose an item
received from other sources, such as the Internet or other
phones.
•
Add Templates
: allows you to apply one of the preset
message templates to the text. Select one of five
messages stored in the
Templates
menu (
Menu 1.4
).
For further details, see page 66.
•
Add Phonebook
: allows you to add a Phonebook entry to
your message. Select one from the list.
•
Add Bookmark
: allows you to add a web page’s address
stored in your Favorite list (
Menu 0.1.2
). Select one from
the list.
•
Language
: allows you to change the language to be used
in T9 input mode. Select the language you want to use.
4. Complete the message, and send or save it by following the
procedure from step 2 on page 64.
Templates
(Menu 1.4)
Using this menu, you can preset a maximum of five messages
that you use most frequently.
Select an empty location or the message template you want
and press the
Options
soft key.
The following options are available:
Edit
: allows you to write a new message or edit the message.
Note:
For further details about how to enter characters, see page 43.
Send Message
: allows you to retrieve the message. Once you
have completed the message, you can send, save and send, or
simply save it. For further details about how to send a message,
see page 64.
Text Messages
67
Delete
: allows you to delete the message. You are asked to
confirm the deletion by pressing the
Yes
soft key.
Settings
(Menu 1.5)
In this menu, you can set up default message information. A
setting group is a collection of settings required to send
messages. The number of setting groups available depends on
the capacity of your SIM card.
Note:
The last setting you accessed is automatically activated for
sending messages.
T-Mobile
each group has its own sub-menu.
Service Center: allows you to store or change the number of
your message center, which is required when sending
messages. You must obtain this number from your service
provider.
Default Destination: allows you to store the default destination
number. The number automatically displays on the Destination
screen when you create a message.
Default Type: allows you to set the default message type to
Text
,
Fax
,
Email
or
Paging
. The network can convert the
messages into the selected format.
Default Validity: allows you to set the length of time your text
messages are stored in the message center while attempts are
made to deliver them.
Setting Name: allows you to give a name to the setting group
currently being defined.
Setting x
(where
x
is the setting group number): each group
has its own sub-menu.
Service Center: allows you to store or change the number of
your message center, which is required when sending
Text Messages
68
messages. You must obtain this number from your service
provider.
Default Destination: allows you to store the default destination
number. The number automatically displays on the Destination
screen when you create a message.
Default Type: allows you to set the default message type to
Text
,
Fax
,
Email
or
Paging
. The network can convert the
messages into the selected format.
Default Validity: allows you to set the length of time your text
messages are stored in the message center while attempts are
made to deliver them.
Setting Name: allows you to give a name to the setting group
currently being defined.
Delete All
(Menu 1.6)
This menu allows you to delete all of the text messages in each
message box. You can also delete all of your messages at one
time.
When a confirming message displays, press the
Yes
soft key to
confirm.
To Press the
select a message box to
clear
Up or Down key. To delete all of
your messages, select
All
Messages
.
place a check mark
Mark
soft key.
remove a check mark
Unmark
soft key.
delete the marked
messages
Delete
soft key.
Text Messages
69
Memory Status
(Menu 1.7)
This menu shows how many messages are currently stored in
the SIM, PHONE and CB (Cell Broadcast) memories.
Voice Mail
(Menu 1.8)
This menu allows you to access your voice mailbox, if your
network supports this service.
The following options are available:
Connect to Voice Server
: before using the Voice Mail feature,
you must enter the voice server number obtained from your
service provider; see menu option
1.8.2
. You can then select
this option and press the
OK
soft key to listen to your
messages.
You can quickly connect to the voice server by pressing and
holding the
1
key in Idle mode.
Voice Server Number
: allows you to change the voice mail
server number, if necessary.
Note:
Voice Mail is a network feature. Please contact your service
provider for further details.
Broadcast
(Menu 1.9)
This network service allows you to receive text messages on
various topics, such as the weather or traffic. Cell Broadcast
To Press the
enter the server number corresponding numeric keys.
correct a digit
C
key.
move the cursor to the left or
right without clearing a digit
Left or Right key.
Text Messages
70
(CB) messages display as soon as they are received, provided
that:
●
the phone is in Idle mode.
●
the
Receive
option is set to
Enable
.
●
the message channel is currently active on the channel list.
The following options are available:
Read
: lets you view the received message. The
Volatile
box
displays the messages from the network, but loses its contents
as soon as the phone is switched off. Scroll through the
message by using the Up and Down keys. While reading a
message, press the
Save
soft key to store the message in the
Archive
box for later retrieval.
Receive
: allows you to enable or disable the reception of
broadcast messages.
Channel List
: allows you to indicate the channels from which
you wish to receive cell broadcast messages. The following
options are available:
Select: use to enable or disable channels on the list by marking
or unmarking them respectively. A check mark displays in front
of each selected channel.
Add Channel: use to enter the ID and title for a new channel.
Delete: use to remove a channel from the list.
Edit: use to change the ID and title of an existing channel.
Language
: allows you to select your preferred language to
display cell broadcast messages.
Please contact your service provider for further details.
Picture Messages
71
Picture Messages
This menu allows you to use the Multimedia Message Service.
Multimedia Message Service (MMS) is a messaging service
very similar to Short Message Service (SMS). It provides
automatic and immediate delivery of personal multimedia
messages from phone to phone or from phone to e-mail.
In addition to the familiar text content of text messages,
multimedia messages can contain images, graphics, voice and
audio clips. An MMS message is a multimedia presentation in
a single entry. It is not a text file with attachments.
Using the MMS feature, your phone can receive and send
messages that contain multimedia files, such as your photos,
sounds and images you downloaded from the Internet and
voice memos you recorded. This function is available only if it
is supported by your service provider. Only phones that offer
multimedia message features can receive and display
multimedia messages.
Inbox
(Menu 2.1)
Viewing a Message When You Receive it
When a new multimedia message comes in, the display shows
a text notification along with the sender’s number.
1. Press the
Select
soft key to view brief information about
the message, such as the sender’s number, the message
size and the subject.
If you want to view the message later in the Inbox, press
the
Exit
soft key.
2. To scroll through the message information, press the Up
or Down key.
Picture Messages
72
3. Press the
Options
soft key to use the following options:
•
Retrieve
: retrieves the message from the MMS server.
•
Delete
: deletes the message.
•
More Information
: shows you detailed information about
the message.
4. To read the message, press the
Select
soft key when
Retrieve
is highlighted.
Your phone retrieves the message contents from the server
and displays it.
5. To scroll through the message, press the Up or Down key.
6. When you are finished, press the key.
Viewing a Received Message in the Inbox
When you access the
Inbox
menu (
Menu 2.1
), the list of
multimedia messages you received displays with the senders’
phone numbers, if they are available in your Phonebook, or
subjects. The icons on the left tell you the status of the
messages.
●
: Messages that have been opened.
●
: Messages that are unopened.
1. Select a message on the list and press the
Select
soft key.
The message displays and scrolls to the next page, if it has
one; for details about setting the time, see page 78.
2. Press the
OK
soft key to go to the message view screen.
Or, the display automatically switches to the screen after a
few seconds.
3. To scroll through the message, press the Up or Down key.
Picture Messages
73
If the message has more than one page, you can scroll
through the pages by using the Left and Right keys.
While viewing a message, you can choose the Message options
by pressing the
Options
soft key.
If you are viewing a new message, the options are the same as
when you view a message as soon as you receive it. See
page 72.
When you are reviewing a message retrieved from the MMS
server, the following options are available:
Delete
: deletes the message.
Reply
: allows you to reply to the sender by sending a text or
multimedia message.
Callback
: allows you to call the sender back.
Cut Address
: allows you to extract the sender’s number or e-
mail address and URL, e-mail addresses or phone numbers
from the message text.
Forward
: allows you to forward the message to another
person.
Save Picture
: allows you to save an image from the message
into your phone. Images are stored in the
Images
folder
(
Menu 9.4
).
Save Sound
: allows you to save a sound from the message
into the
Sounds
folder (
Menu 9.3
).
Information
: shows you information about the message, such
as the message status, subject, sender’s address or phone
number, message size, priority and the time and date when the
message was received.
Picture Messages
74
Outbox
(Menu 2.2)
When you access this menu, the list of the multimedia
messages you sent or saved displays. The icons on the left tell
you the status of the messages.
●
: Messages currently being sent
●
: Messages sent
●
: Messages your phone couldn’t send
●
: Messages to be sent
●
: Messages deferred
1. Select a message on the list and press the
Select
soft key.
The message displays and scrolls to the next page, if it has
one, after a specified time; for details about setting the
time, see page 78.
2. Press the
OK
soft key to go to the message view screen.
Or, the display automatically switches to the screen after a
few seconds.
3. To scroll through the message, press the Up or Down key.
If the message has more than one page, you can scroll
through the pages by using the Left and Right keys.
While viewing a message, you can choose the following options
by pressing the
Options
soft key:
Delete
: deletes the message.
Cut Address
: allows you to extract the destination numbers or
e-mail addresses and URL, e-mail addresses or phone numbers
from the message text.
Send
: allows you to send/resend the message.
Picture Messages
75
Edit Message
: allows you to change the message contents,
sound, picture or text.
Information
: shows you information about the message,
such as the message status, subject, sender and recipients’
addresses or phone numbers, message size, priority and the
time and date when the message was sent.
Draft
(Menu 2.3)
After creating a multimedia message, you can store it in this
message box for later sending.
For further details about viewing a message, see “Outbox” on
page 74.
Write New
(Menu 2.4)
This menu allows you to create a new multimedia message
and then send it to multiple destinations.
Creating and Sending a Picture Message
1. Enter the subject of your message and press the
OK
soft
key.
For further details about entering characters, see page 43.
2. When
Add Here
highlights, press the
Options
soft key
and add the message contents using one of the following
options:
•
Add Text
: enter the message text and press the
OK
soft
key.
•
Add Picture
: allows you to add a picture stored in the
Images
folder (
Menu 9.4
). Choose a picture and press
the
Select
soft key. You may not be able to add some
downloaded images if they are not in the correct format.
Picture Messages
76
•
Add Sound
: allows you to add a sound file. Select
Record
to record a new voice memo, or
Sound List
to
add one of the sounds in the Sounds folder (
Menu 9.3
)
or voice memo list (
Menu 7.6.2
). You may not be able
to add some downloaded sounds if they are not in the
correct format.
•
Send
: allows you to send the message. Use this option
when you finish creating the message. This option is
activated after you add content to the message.
•
Save
: saves the message in the
Draft
(
Menu 2.3
) or
Templates
(
Menu 2.5
) box for later use. This option is
activated after you add content to the message.
•
Settings
: allows you to change the message settings.
For details about setting options, see page 78. After
changing the settings, you need to press the soft key
or the
C
key to go to back to the options screen.
•
Add Destination
: allows you to enter destination
numbers or addresses. See steps 7 to 12 starting from
page 77. After adding them, you need to press the
soft key or the
C
key to go to back to the option screen.
•
Preview
: shows your message as it will display on the
recipient’s phone.
Note:
You can add text, an image and a sound once for each page.
3. When the added content displays, press the Down key to
highlight
Add Here
.
4. Repeat steps 2 and 3 until you finish creating your
message.
5. If you want to change the added items, press the Up or
Down key to highlight one and press the
Options
soft key.
The following options are available:
Picture Messages
77
•
Add Page
: allows you to add more pages.
After adding pages, you can move to each page using the
Left or Right key on the message screen.
•
Delete
: deletes the item from your message.
•
Duration
: allows you to set when and how long text, an
image or a sound displays on the message presentation
screen. When the message is opened, the display shows
the item after a specified time in
Set Start Time
and
scrolls to the next item after a specified time in
Set
Duration
.
•
Send
: allows you to send the message.
•
Save
: saves the message in the
Draft
(
Menu
2.3
) or
Templates
(
Menu 2.5
) box for later use.
•
Settings
: allows you to change the message settings. For
details about setting options, see page 78.
•
Add Destination
: allows you to enter destination
numbers or addresses. See steps 7 to 12.
•
Preview
: shows your message as it will display on the
recipient’s phone.
Note:
The options available are different depending on whether the
item you select on the message screen is text, an image or
sound.
6. When you are finished creating the message, choose
Send
from the options and press the
Select
soft key.
7. Select a destination type (
To
,
Cc
or
Bcc
), enter a
destination number or address and press the
Select
soft
key.
8. Choose one of the following options and press the
Select
soft key:
Picture Messages
78
•
Phone Number
: allows you to enter the phone number
you want.
•
E-Mail Address
: allows you to enter the e-mail address of
the recipient.
•
Phone Book
: allows you to retrieve a number from your
Phonebook.
9. Enter a number or an e-mail address, or select a number
from Phonebook.
10.When the correct number or address displays, press the
OK
soft key.
11.To add a destination, press the
Select
soft key when
Add
Destination
highlights. Repeat from step 8.
If you want to edit the destinations, select one and press the
Select
soft key. You can change or delete it.
12.When you are finished adding the numbers or addresses to
the destination type, press the
C
key or the soft key.
13.To enter additional numbers or addresses, repeat steps 7
through 12.
You can enter up to 10 destinations each for
To
,
CC
and
Bcc
.
14.When you are finished entering the destinations, select
Send Message
and press the
Select
soft key on the Picture
Msg Send screen.
Your phone sends the message.
Using Message Setting Options
When you select
Settings
from the message options, the
following options are available:
Delivery Report
: when this option is enabled, the network
informs you whether or not your message has been delivered.
Picture Messages
79
Read Reply
: when this option is enabled, your phone sends a
request for a reply along with your message to the recipient.
Auto Download
: you can set whether or not your phone
retrieves new incoming messages from the MMS server
without notifications. When this option is enabled, the phone
automatically retrieves new messages from the server. As
soon as you receive a message you can use more options
while you are reading. See page 73 for details about the
options.
Message Acceptance
: you can specify the category of
messages you want to receive.
Hide ID
: when this option is enabled, your phone number
does not display on the recipient’s phone.
Expiry Date
: you can select the length of time your
messages are stored in the message center after they are
sent.
Delivery Time
: you can set a delay time before the phone
sends your messages.
Priority
: you can select the priority level of your messages.
Report Allowed
: when this option is enabled, the sender of
an incoming message receives a delivery report from the
network.
Page Duration
: you can set the length of time one page of a
received message displays on the message presentation
screen. After a specified time, the display automatically
scrolls to the next page.
Templates
(Menu 2.5)
This menu stores messages you saved as templates so that
you can use them to make new messages.
Picture Messages
80
1. Scroll through the template list using the Up and Down keys.
2. When the message template you want highlights, press the
Select
soft key.
3. Press the
OK
soft key to use the following options, or the
display automatically shows the options after a specified
time:
•
Edit Message
: allows you to send a message using the
template. For further details about how to send a
message, see page 75.
•
Delete
: allows you to delete the message. You are asked
to confirm the deletion by pressing the
Yes
soft key.
4. Press the
key to return to Idle mode.
Delete All
(Menu 2.6)
This menu allows you to delete all of the multimedia messages
in each message box. You can also delete all of your messages
at one time.
When a confirming message displays, press the
Yes
soft key to
confirm.
To Press the
select a message box to
clear
Up or Down key. To delete all of
your messages, select
All
Messages
.
place a check mark
Mark
soft key.
remove a check mark
Unmark
soft key.
delete the marked
messages
Delete
soft key.
Picture Messages
81
Memory Status
(Menu 2.7)
You can check the amount of the memory being used and the
memory remaining for multimedia messages.
Each time you press the
Next
soft key, the display shows the
total space, including the free and used space. It also shows
how much space is currently occupied by each message box.
Call Records
82
Call Records
In this menu, you can view the:
●
calls you missed, received or dialed.
●
length of your calls.
●
cost of your calls.
Notes:
• You can access the numbers in the three types of call records by
pressing the key in Idle mode.
• The number of call records the phone can store may be different
depending on your SIM card.
Missed Calls
(Menu 3.1)
This menu lets you view the last 20 numbers of the calls you
received, but did not answer.
The number and name, if available, display together with the
time and date when the call was received.
By pressing the
Options
soft key, you can:
●
edit the number, if available, and dial it or save it in
Phonebook.
●
delete the call from the list.
You can also dial the number by pressing the key.
Incoming Calls
(Menu 3.2)
This menu lets you view the last 20 numbers of the calls you
received.
The number and name, if available, display together with the
time and date when the call was received.
Call Records
83
By pressing the
Options
soft key, you can:
●
edit the number, if available, and dial it or save it in
Phonebook.
●
delete the call from the list.
You can also dial the number by pressing the key.
Outgoing Calls
(Menu 3.3)
This menu lets you view the last 20 numbers you dialed.
The number and name, if available, display together with the
time and date when the call was made.
By pressing the
Options
soft key, you can:
●
edit the number and dial it or save it in Phonebook.
●
delete the call from the list.
You can also dial the number by pressing the key.
Delete All
(Menu 3.4)
This menu allows you to delete all of the records in each call
record. You can also delete all of your call records at one time.
To Press the
select a call record to
clear
Up or Down key. To delete all of
your call records, select
All
Calls
.
place a check mark
Mark
soft key.
remove a check mark
Unmark
soft key.
delete the marked
records
Delete
soft key.
Call Records
84
When a confirming message displays, press the
Yes
soft key to
confirm.
Call Time
(Menu 3.5)
This menu lets you view the timers for calls you made and
received.
Note:
The actual time invoiced for calls by your service provider may
vary, depending on network features, rounding-off for billing
purposes and so on.
The following options are available:
Last Call
: length of the last call.
Total Outgoing
: total length of all calls you made since the
timer was last reset.
Total Incoming
: total length of all calls you received since the
timer was last reset.
Reset Timers
: option used to reset the call timers. You must
first enter the phone password and then press the
OK
soft key.
Note:
The password is preset to “00000000” at the factory. To change
this password.
Telev is i on
85
Television
Your phone has a built-in TV tuner that receives TV broadcasts
directly from your local stations so that you can access color TV
in real time.
In addition, you can capture and download frames of any TV
broadcast, such as a favorite scene or dramatic sports play, for
use as a wallpaper image or power on/off image.
Note:
You can quickly access the
Television
menu by pressing and
holding the TV key in Idle mode.
TV
(Menu 4.1)
This menu allows you to turn the TV tuner on and watch
television.
Note:
• During a call, you cannot access the TV.
• Watching television consumes more battery power than any other
phone function.
Before watching television:
●
Plug the supplied ear-microphone into the jack on the left
side of the phone. You can hear the TV sound or adjust the
volume using only the ear-microphone. The ear-microphone
also acts as an antenna.
●
To use an optional cradle, place the phone on the cradle and
adjust its direction so that you can see the TV screen from
where you are.
To watch television:
1. Access the
TV
menu (
Menu 4.1
) to turn the TV on. You can
also press and hold the TV key in Idle mode.
The first channel or the last channel you watched displays.
Television
86
2. Select a channel by entering the channel number using the
number keypad or pressing the Left or Right key.
To scroll through any saved channels, press the Up or Down
key.
4. To turn the TV off, press the key.
Notes:
• You may not be able to see the screen clearly under direct sunlight. To
see it better, adjust the brightness; see page 87.
• When you are far from the broadcast station, near a car, neon lights or
in an area where high frequency electronic machines are used, the
quality of TV reception may be poor. Move and try again.
• TV reception is not related to your mobile services. When there are
high buildings or mountains between the broadcast station and your
location, the reception may be poor. Move and try again.
3.
To Use the
adjust the volume Volume scroll bar on the ear-
microphone.
change the view
mode
TV key. You can change the screen
to full view and then flip it
vertically.
use the TV options
Options
soft key. For details, see
the following page.
save the image of the
current screen
Capture
soft key. You can access
the image in the
TV Image
menu.
See page 88.
Telev is i on
87
Using the TV options
While watching television, press the
Options
soft key to access
the TV options.
The following options are available:
Channel
: allows you to save all of the available channels or the
ones you watch frequently.
Auto Program: your phone automatically scans through all of
the frequency bands and saves all of the available channels.
Add: allows you to search for and save the channel you want
manually.
Delete: allows you to delete a channel after checking it.
Delete All: allows you to delete all of the saved channels.
Display
: allows you to adjust the quality of the TV screen.
Brightness: adjusts the brightness of the screen.
Contrast: adjusts the color contrast of the screen.
Reset: resets the screen to its default status.
Timer
: allows you to set the TV to automatically turn off after a
specified time. The provided options are:
Off: No time limit is set.
15 Minutes: The TV will turn off after 15 minutes.
To Press the
scroll to a different
option
Up or Down key.
select the highlighted
option
Select
soft key or the Right key.
Television
88
30 Minutes: The TV will turn off after 30 minutes.
TV Image
(Menu 4.2)
In this menu, you can view the capture images of the TV screen
you saved.
The display shows the latest screen image you captured. Scroll
through the images using the Left and Right keys.
Press the
Options
soft key to use the following options:
Send
: allows you to send the image to other people using a
multimedia message.
Rename
: allows you to change the name of the image.
Delete
: deletes the selected image.
Delete All
: allows you to delete all of the TV images.
Protection
: allows you to protect the image from being
deleted.
Set This Photo as
: allows you to set the image as your
wallpaper for the idle screen or an image to be displayed when
you turn the phone on or off.
Memory Status
(Menu 4.3)
You can check the amount of the memory being used and the
memory remaining for TV images.
The display shows the total space including the used and free
space.
Sound Settings
89
Sound Settings
You can use the Sound Settings feature to customize various
settings, such as the:
●
ring melody, volume and type.
●
sounds made when you press a key, receive a message,
open/close the folder or switch your phone on/off.
●
alert tone made every minute during a call, when you make
an error or when your call is connected to the system.
Note:
When the phone is in Silent mode (see page 31), you cannot
change the sound settings.
Ring Tone
(Menu 5.1)
This menu allows you to select a ring melody.
You can choose between many different melodies. If you have
downloaded sounds from the Internet or the optional EasyGPRS
program, you can use them in this menu.
Ring Volume
(Menu 5.2)
This menu allows you to adjust the ring volume to one of five
levels.
Use the Up and Down keys or the Volume keys on the left side
of the phone to increase or decrease the volume.
Alert Type
(Menu 5.3)
This menu allows you to specify how you are to be informed of
incoming calls or the alarm settings.
The following options are available:
Sound Settings
90
Light Only
: the service light flashes; the phone neither rings
nor vibrates.
Melody
: the phone rings using the ring melody selected in the
Ring Tone
menu (
Menu 5.1
); see page 89.
Vibration
: the phone vibrates but does not ring.
Vibra+Melody
: the phone first vibrates three times and then
starts ringing.
Keypad Tone
(Menu 5.4)
This menu allows you to select the tone that the phone sounds
when you press a key.
To turn the sound off, select
Off
.
Message Tone
(Menu 5.5)
This menu allows you to select how the phone informs you that
a new message has been received.
SMS Tone
(Menu 5.5.1)
The following options are available for alerting you to new SMS
messages:
SMS Tone x
: Where
x
is one of the phone uses one of several
SMS tones.
SMS-CB Tone
(Menu 5.5.2)
The following options are available for alerting you to new cell
broadcast (CB) messages:
Off
: the phone does not use a CB tone.
Light Only
: the service light flashes.
Sound Settings
91
Vibration
: the phone vibrates.
Single Beep
: the phone beeps once.
SMS-CB Tonex
: the phone uses one of several CB tones.
Folder Tone
(Menu 5.6)
This menu allows you to select the tone that the phone sounds
when you open or close the folder.
To turn the sound off, select
Off
.
Power On/Off
(Menu 5.7)
This menu allows you to select the melody that the phone
sounds when it is switched on and off.
To turn the sound off, select
Off
.
Extra Tones
(Menu 5.8)
You can customize additional tones used for the phone.
The following options are available:
Error Tone
: sets whether or not the phone informs you when
you make a mistake.
To turn a given tone Press the
on
Mark
soft key. A check mark
displays in front of the option.
off
Unmark
soft key. The check mark
no longer displays.
Sound Settings
92
Minute Minder
: sets whether or not the phone beeps every
minute during an outgoing call to keep you informed of the
length of your call.
Connect Tone
: sets your phone to beep when your call is
connected to the system.
Phone Settings
93
Phone Settings
Many different features of your phone can be customized to suit
your preferences. All of these features are accessed in the
Phone Settings
menu.
Display Settings
(Menu 6.1)
In this menu, you can change various settings for the display or
the backlight.
Wallpaper
(Menu 6.1.1)
This menu allows you to change the background image or the
color of the text to be displayed in Idle mode.
The following options are available:
Wallpaper
: you can select a background image to be displayed
on the idle screen.
To change the background image:
1. Scroll through the list by pressing the Up or Down key.
You have various preset images available. You can also
select a blank background or any images downloaded from
the Internet and the optional EasyGPRS program or received
in messages.
If you set a TV capture image as the wallpaper in the
TV
Image
menu (
Menu 4.2
), it displays as My Photo.icn on
the list.
2. Press the
Select
soft key when the image you want
highlights.
3. When the image displays, press the
Select
soft key to
display it on the idle screen.
Phone Settings
94
Menu Style
(Menu 6.1.4)
This menu allows you to select the menu display style. You can
choose either
Bar Style
or
Page
Style
.
Back Light
(Menu 6.1.5)
You can select whether or not the phone uses the backlight. A
marginal increase in standby/talk time can be achieved by
turning the backlight off.
Select the length of time the backlight is on. The backlight turns
on when you press a key or receive a call or message and
remains on for the specified length of time.
Service Light
(Menu 6.1.6)
This menu allows you to select whether or not the service light
is used. It also allows you to select a color in which it flashes.
Select one of the seven color settings. When the phone is ready
for use, the service light flashes in the chosen color.
If you do not wish to use the service light, select
Off
.
Graphic Logo
(Menu 6.1.7)
This menu allows you to display your service provider’s logo
instead of its name.
Off
: the service provider’s name displays in Idle mode.
On
: the service provider’s logo stored in your phone displays in
Idle mode; if no logo has been stored, the service provider’s
name displays.
Front LCD
(Menu 6.1.8)
This menu allows you to adapt the external display to your
preference.
Phone Settings
95
The following options are available:
Light timer
: allows you to set the length of time the external
display shows the image selected using the
Image Select
option.
Greeting Message
(Menu 6.2)
This menu allows you to set a greeting to be displayed briefly
when the phone is switched on.
For further details about how to enter characters, see page 43.
Own Number
(Menu 6.3)
This function is a memory aid, which you can use to check your
own phone numbers if you need to do so.
You can:
●
assign a name to each of your own phone numbers
registered on your SIM card.
●
edit the names and numbers.
Any changes made here do not in any way affect the actual
subscriber numbers on your SIM card.
To Press the
clear the existing message
C
key and hold it down until the
message is cleared.
enter a new message appropriate alphanumeric keys.
change the text input
mode
right soft key.
Phone Settings
96
Language
(Menu 6.4)
You can select a display language. When the language option is
set to
Automatic
, the language is automatically selected
according to the language of the SIM card used.
Security
(Menu 6.5)
The Security feature enables you to restrict the use of your
phone to others and the types of calls.
Various codes and passwords are used to protect the features
of your phone. They are described in the following sections.
Extra Settings
(Menu 6.6)
You can turn the automatic redialing or answering features on
or off.
The following options are available:
Auto Redial
: when this option is checked, the phone makes up
to ten attempts to redial a phone number after an unsuccessful
call.
Note:
The interval between two attempts varies.
Active Folder
: when this option is checked, you can simply
open the folder to answer a call.
To turn a feature Press the
on
Mark
soft key.
A check mark displays in front of
the option.
off
Unmark
soft key.
The check mark no longer displays.
Phone Settings
97
When it is unchecked, you must press a key to answer a call,
depending on the setting of the
Anykey Answer
option. See
the next page.
Anykey Answer
: when this option is checked, you can answer
an incoming call by pressing any key, except the key and
the
Reject
soft key. To reject the call, press the key or
the
Reject
soft key.
When this option is unchecked, you can only press the key
or
Accept
soft key.
Short Cut
(Menu 6.7)
The Navigation keys can be used as shortcut keys. In Idle
mode, they allow you to access specific menus directly. The Left
and Right keys are fixed as shortcuts to the
Text Message
and
Voice Memo
menus. In this menu, you can change the
shortcuts assigned to the Up and Down keys.
To assign a shortcut to a key:
1. Select the key to be used as a shortcut key by pressing the
Up or Down key, and press the
Select
soft key.
2. Select the menu to be assigned to the key by pressing the
Up or Down key.
Note
: To deactivate a shortcut key, select the
None
option.
3. Press the
Select
soft key to save the selection.
Infrared Activate
(Menu 6.8)
This feature allows you to send or receive data through the
infrared port.
To use an infrared connection, you must:
●
configure and activate an IrDA-compliant infrared port on
your PC.
Phone Settings
98
●
activate the infrared feature on the phone. The IrDA icon
( ) appears on the top line of the display.
●
align the IrDA port on the phone with the IrDA port on
your computer or another phone.
The connection is ready for data transmission.
If there is no communication between your phone and the
IrDA-compliant device within 30 seconds of activating the
feature, it is automatically deactivated.
Note:
For optimal performance, use an optional data link cable. You can
purchase one from your local Samsung dealer.
Reset Settings
(Menu 6.9)
You can easily reset your phone to its default settings. To
reset your phone:
1. Select the
Reset Settings
menu.
2. Enter the 8-digit phone password and press the
OK
soft
key.
Note:
The password is preset to “00000000.” To change this
password.
Organizer
99
Organizer
The Organizer feature enables you to:
●
set an alarm so that the phone rings at a specific time,
such as to remind you of an appointment.
●
view the calendar and organise your schedule.
●
set the current time and date.
●
define a list of things to do.
●
record voice memos.
●
use the phone as a calculator for basic mathematical
equations or currency exchange operations.
Alarm
(Menu 7.1)
This feature allows you to:
●
set the alarm to ring at a specific time.
●
set the phone to switch on automatically and ring the
alarm even if the phone is switched off.
The following options are available:
Once Alarm
: the alarm rings only once and is then
deactivated.
Daily Alarm
: the alarm rings every day at the same time.
Morning Call
: the alarm rings to wake you up in the
morning.
To set an alarm:
1. Choose the type of alarm to be set and press the
Select
soft key.
2. Enter the time for the alarm to sound.
Organizer
100
Note:
Your phone is preset to use 12-hour format. To change the
format, see page 103.
If you want to use the alarm options, press the
Options
soft
key. The following options are available:
•
Remove Alarm
: deactivates the current alarm.
•
Alarm Sound Set
: allows you to select the alarm melody.
3. Press the
OK
soft key.
4. Select
AM
or
PM
for 12-hour format and press the
Select
soft key.
5. If you select
Morning Call
in step 1, choose the repeat
option,
Monday to Friday
or
Monday to Saturday
, and
press the
Select
soft key.
To stop the alarm when it rings, press the
Exit
soft key.
Remove Alarm
: deactivates all alarm settings.
Autopower
: when this option is set to
Enable
, the alarm rings
at the specified time, even if the phone is switched off.
If the option is set to
Disable
and the phone is switched off at
the specified time, the alarm does not ring.
Calendar
(Menu 7.2)
With the Calendar feature, you can:
●
consult the calendar to check your memos.
●
write memos to keep track of your schedule.
●
set an alarm to act as a reminder, if necessary.
Organizer
101
Consulting the Calendar
When you select the
Calendar
menu (
Menu 7.2
), the
calendar displays with today’s date highlighted. The following
options are available when you press the
Options
soft key:
Search All
: displays all of the memos, starting with the
oldest regardless of the day. To scroll through the memos,
press the Up or Down key.
Delete All
: allows you to delete all of the memos. You are
asked to confirm your action.
Go to Date
: allows you to go to a specific date.
Exit
: exits the Calendar feature and returns to Idle mode.
Writing a Memo
You can make up to 30 memos for one day.
To write or edit a memo on a specific date:
1. Select a date on the calendar, using the navigation keys.
Note:
To skip to the previous or next month, press the Volume
keys.
2. Press the
Select
soft key.
An empty memo screen displays allowing you to enter
your memo.
3. Enter your memo and then press the
OK
soft key.
Note:
For further details about how to enter characters, see
page 43.
You are asked if you wish to set an alarm.
4. If you want an alarm to ring on the chosen day, press the
Yes
soft key.
Otherwise, press the
No
soft key. The memo is saved.
Organizer
102
5. If you pressed the
Yes
soft key, enter the time for the alarm
and press the
OK
soft key.
Note:
Your phone is preset to use 12-hour format. To change the
format, see page 103.
You can also select the melody for the alarm by pressing the
Melody
soft key.
6. Select
AM
or
PM
for 12-hour format and press the
Select
soft key.
The color of the date on the calendar changes to green to
indicate that a memo exists for that date.
Viewing a Memo
When you select a day for which a memo already exists on the
calendar, the latest memo for the day displays.
If more than one memo is stored, press the Up or Down key to
scroll to the previous or next memo.
Press the
New
soft key to add a new memo for the day.
You can use the following options by pressing the
Options
soft
key:
Edit
: allows you to change the memo text.
Alarm
: allows you to set an alarm to ring at a specified time to
remind you of the memo. If you set the alarm earlier, you can
change or delete it.
Delete
: allows you to delete the memo.
Copy to
: allows you to copy the memo to another date.
Move to
: allows you to change the date of the memo.
Organizer
103
Time & Date
(Menu 7.3)
This menu allows you to change the current time and date
displayed. You can also find out what time it is in another part
of the world.
The following options are available:
Set Time
: allows you to enter the current time. You can choose
the time format in the
Time Format
menu (
Menu 7.3.4
). See
the following page.
Note:
Before setting the time, you must specify your time zone in the
World Time
menu (
Menu 7.3.3
).
Set Date
: allows you to enter the day, month and year.
World Time
: allows you to find out what time it is in another
part of the world, using the Left and Right keys.
The screen shows the:
●
city name.
●
current time and date.
●
time difference between the selected city and your city if you
have set the local time; see below for further details.
●
city selected as your time zone.
To select your time zone:
1. Select the city corresponding to your time zone by pressing
the Left or Right key one or more times.
The local time and date display.
2. Press the
Set
soft key.
Time Format
: allows you to change the time format to
24
Hours
or
12 Hours
.
Organizer
104
Calculator
(Menu 7.4)
With this feature, you can use the phone as a calculator. The
calculator provides basic arithmetic functions; addition,
subtraction, multiplication and division.
1. Enter the first number using the numeric keys.
Notes
:
• To delete mistakes or clear the display, press the
C
key.
• To include a decimal point or a bracket, press the left soft key until
the symbol you want displays.
2. Press the right soft key until the arithmetic symbol you want
appears:
+
(addition),
-
(subtraction),
(multiplication),
/
(division).
3. Enter the second number.
4. To view the result, press the key.
5. Repeat steps 1 to 4 as many times as required.
To Do List
(Menu 7.5)
This feature allows you to:
●
enter a list of tasks to be done.
●
assign a priority and a deadline to each task.
●
sort the tasks by priority and status mark.
Creating the To Do List
1. Press the
New
soft key.
2. Enter the first task.
Note:
For further details about how to enter characters, see
page 43.
3. Press the
OK
soft key.
Organizer
105
4. Select a priority status of high, normal or low using the Up
and Down keys and press the
Select
soft key.
5. Enter your deadline and press the
OK
soft key.
If you do not want to set a deadline, press the
Skip
soft
key.
Editing the To Do List
When you select the
To Do List
menu (
Menu 7.5
), the current
contents display with the status mark, if the task has been
done, and priority; for High, for Normal and for Low.
Action Procedure
View the details for a
specific task
➀
Highlight the task.
➁
Press the
View
soft key.
➂
Scroll through the tasks using the Up
and Down keys, if necessary.
Change the status of
a specific task
➀
Highlight the task.
➁
Press the key to mark the task as
completed as of the current time and
date.
or
➀
Highlight the task.
➁
Press the
Options
soft key.
➂
Select the
Mark
option.
➃
Select the appropriate status (
Done
or
Undo
).
Create a new task
➀
Press the
Options
soft key.
➁
Select the
New
option.
➂
Enter the text, priority and/or
deadline for the task.
Organizer
106
Edit an existing task
➀
Highlight the task.
➁
Press the
Options
soft key.
➂
Select the
Edit
option.
➃
Change the text, priority and/or
deadline for the task.
Sort the existing
tasks by priority or
status
➀
Press the
Options
soft key.
➁
Select the
Sort
option.
➂
Select the sort criterion (
High
,
Low
,
Done
or
Undo
).
Copy a task
➀
Highlight the task.
➁
Press the
Options
soft key.
➂
Select the
Copy
option.
➃
Change the text, priority and/or
deadline for the task.
Copy a task to the
calendar
➀
Highlight the task.
➁
Press the
Options
soft key.
➂
Select the
Copy to
Calendar
option.
➃
Change the text and deadline for the
task and set the alarm.
Delete a task
➀
Highlight the task.
➁
Press the
Options
soft key.
➂
Select the
Delete
option.
Delete all tasks
➀
Press the
Options
soft key.
➁
Select the
Delete All
option.
➂
Confirm the deletion by pressing the
OK
soft key.
Exit the To Do list
➀
Press the
Options
soft key.
➁
Select the
Exit
option.
Action Procedure
Organizer
107
Voice Memo
(Menu 7.6)
You can record voice memos. After recording, you can send a
memo to other people using the Multimedia Message Service.
Record
(Menu 7.6.1)
This menu allows you to record a new memo. When you
select this option, the display shows the 30-second timer.
1. To start recording, press the
Record
soft key.
2. Record a memo by speaking into the microphone.
3. When you press the
Stop
soft key or if the recording time
expires, the following options display:
•
Replay
: plays back your memo.
•
Re-record
: discards the memo and enables you to
record another one.
•
Save
: allows you to save the memo.
•
Quit
: cancels your recording and exits the
Record
menu.
4. To save the memo, choose
Save
from the options and
press the
Select
soft key.
5. Press the
C
key to clear the default name, if necessary,
and enter a name for the memo.
For further details about how to enter characters, see
page 43
.
6. Press the
OK
soft key.
The memo is saved and then the display shows the memo
information.
7. Press the
Options
soft key to use the following memo
options:
Organizer
108
•
Send
: allows you to send the memo to other people by
using the MMS feature. Follow the procedure on
page 75.
•
Rename
: allows you to change the memo’s name.
•
Delete
: deletes the memo.
8. To exit, press the
C
or key.
Memo List
(Menu 7.6.2)
This menu shows your voice memo list. Scroll to a memo and
press the
Options
soft key. The following options are
available:
Play
: plays the memo.
Send
: allows you to send the memo to other people by using
the MMS feature. See page 75 for further details about
sending a message.
Rename
: allows you to change the memo’s name.
Information
: displays information about the memo, such as
the name, date when the memo was made, recording
duration and memory size.
Delete
: deletes the memo.
Delete All
(Menu 7.6.3)
This menu, you can delete all of your voice memos.
When the confirming message appears, press the
Yes
soft
key. To cancel the deletion, press the
No
soft key.
Memory Status
(Menu 7.6.4)
This menu displays the memory used and available for the
organizer.
Organizer
109
Currency Exchange
(Menu 7.7)
Using this menu, you can figure out currency conversions.
1. Enter the current exchange rate of your source currency and
press the
OK
soft key.
You can insert a decimal point by pressing
the key
.
2. Enter the amount to convert and press the
OK
soft key.
The amount you entered and its equivalent value display.
3. Press the
Exit
soft key to exit the currency convertor.
Organizer
110
Network Services
111
Network Services
These menu functions are network services. Please contact
your service provider to check their availability and subscribe
to them, if you wish.
Call Forwarding
(Menu 8.1)
This network service enables incoming calls to be rerouted to
the number that you specify.
Example: You may wish to forward your business calls to a
colleague while you are on holidays.
You can use the following options to forward voice calls and/or
data calls:
Forward Always
: all calls are forwarded.
Busy
: calls are forwarded when you are already on another
call.
No Reply
: calls are forwarded when you do not answer the
phone.
Unreachable
: calls are forwarded when you are not in an
area covered by your service provider.
Cancel All
: all call forwarding options are canceled.
To set your call forwarding options:
1. Select a call forwarding option by pressing the Up or Down
key, and then press the
Select
soft key.
2. Select the type of calls, voice or data, by pressing the Up
or Down key, and then press the
Select
soft key.
The current status displays. If the option has already been
set, the number to which the calls are forwarded displays.
Network Services
112
4. Enter the number to which the calls are to be forwarded
and press the
OK
soft key.
To enter an international code, press the
0
key until the
+
sign displays.
The phone sends your settings to the network and the
network’s acknowledgement displays.
You can deactivate all call forwarding settings by selecting the
Cancel All
option.
Call Waiting
(Menu 8.2)
This network service informs you when someone is trying to
reach you during another call.
You can specify individual call waiting options for voice calls
and/or data calls.
To set your call waiting options:
1. Select the type of calls, voice or data, to which you want
to apply the call waiting option by pressing the Up or Down
key, and then press the
Select
soft key.
The screen informs you whether call waiting is activated or
deactivated.
3.
To Press the
activate call forwarding
Activate
soft key.
Go to step 4.
change the number to be
called
Change
soft key.
Go to step 4.
deactivate call forwarding
Remove
soft key.
Network Services
113
2. You can activate or deactivate the call waiting feature as
necessary by using the
Activate
or
Deactivate
soft key
respectively.
To return to the previous screen, press the
Exit
soft key.
You can also deactivate all call waiting settings by selecting
the
Cancel All
option.
Network Selection
(Menu 8.3)
The Network Selection feature enables you to automatically or
manually select the network used when roaming outside of
your home area.
Note:
You can select a network other than your home network only if
there is a valid roaming agreement between them.
To indicate to automatically or manually select the network
when roaming:
1. When
Network Selection
displays, press the
Select
soft
key.
2. Press the Up or Down key until the appropriate option
highlights and then press the
OK
soft key.
If you select
Automatic
, you are connected to the first
available network when roaming.
If you select
Manual
, the phone scans for the available
networks. Go to step 3.
3. Press the Up or Down key until the network you want
highlights and then press the
OK
soft key.
You are connected to that network.
Network Services
114
Caller ID
(Menu 8.4)
You can prevent your phone number from being displayed on
the phone of the person being called.
Note:
Some networks do not allow the user to change this setting.
The following options are available:
Default
: the default setting provided by the network is used.
Hide Number
: your number does not display on the other
person’s phone.
Send Number
: your number is sent each time you make a call.
Funbox
115
Funbox
The
Funbox
menu contains several fun options.
t-Zones
(Menu 9.1)
Your phone is equipped with a WAP (Wireless Application
Protocol) browser to allow you to access and navigate the
Wireless Web using your phone.
Home
(Menu 9.1.1)
Selecting this menu connects the phone to the network and
loads the homepage of the Wireless Web service provider. You
can also press the key in Idle mode.
The content of the WAP Browser startup homepage depends
on your Wireless Web service provider. To scroll through the
screen, use the Up and Down keys.
Note:
To access the startup homepage from any other screen in the
WAP browser, use the
Home
option. For further details about
the WAP Browser menus, see page 117.
Exiting the WAP Browser
To exit the browser at any time, simply press the key.
Funbox
116
Navigating the WAP Browse
r
Entering Text in the WAP Browser
When you are prompted to enter text, the current text input
mode is indicated on the screen.
The following modes are available:
Upper-case Character mode
(
A
): allows you to enter upper-
case English characters.
Lower-case Character mode
(
a
): allows you to enter lower-
case English characters.
Note:
You can also enter special characters in Upper-case or Lower-case
Character mode. For details about available characters, see
page 47.
T9 mode
(
T9
): allows you to enter English characters by
pressing one key per letter. In this mode,
you can use only the
0
key to display alternative words.
To change the case, press the
key.
Number mode
(
1
): allows you to enter numbers.
To Press the
scroll through and select
browser items
Up or Down key until the symbol
points to the item, and then press
the
Select
soft key to confirm the
selection.
select a numbered item corresponding numeric key.
return to the previous
page
Back
soft key or the
C
key.
return to the startup
homepage
key for more than two seconds
and select the
Home
option. For
further details about this option, see
page 117.
Funbox
117
Selecting and Using Browser Menu Options
Various menu options are available when you are using the
WAP Browser to navigate the Wireless Web.
To access a menu option:
1. Press and hold the key.
A menu list displays.
2. Highlight a menu by pressing the Up or Down key.
3. Select an option by pressing the
Select
soft key.
4. If necessary, select a secondary option using the Up and
Down keys, and press the
Select
soft key to confirm.
Note:
The menus may vary, depending on your version of the WAP
browser.
The following options are available:
Reload
: reloads the current page.
Home
: takes you back at any time to the home page of the
Wireless Web service provider.
Go to URL
: allows you to manually enter the URL address of a
Web page. After entering an address, press the
OK
soft key to
go there directly.
To change the text
input mode
Press the key one or more times.
To en t e r a spa c e Press the
key.
To ed i t t ext
➀
Set the cursor to the right of the
character(s) to be corrected.
➁
Press
the
C
key as required.
➂
Enter the correct character(s).
Funbox
118
Show URL
: displays the URL address of the Web page to
which you are currently connected to. It also enables you to
set the current site as the startup home page.
Edit Home
: allows you to change the startup home page
manually. Enter the URL and press the
OK
soft key. For
further details about entering text, see page 43.
Clear Cache
: deletes the information stored in the cache,
which stores the most recently accessed Web pages.
Inbox
: allows you to read messages received from the web
server.
Favorite
(Menu 9.1.2)
This menu allows you to store the URL addresses of up to ten
of your favorite web sites. You can access this menu directly
by pressing and holding the
key while using the WAP
browser.
To store a URL address:
1. Select an empty location and press the
Select
soft key.
2. Enter the address and press the
Enter
soft key.
For further details about how to enter characters, see
page 43.
To Press the
set the current page as
your startup home page
Option
soft key, select the
Save to
Home
option.
set a bookmark for the
current page
Option
soft key, select the
Save to
Bookmark
option.
cancel your setting
Back
soft key.
Funbox
119
3. Enter a name for the favorite item and press the
Enter
soft key.
After saving favorite items, you can use the following options
by pressing the
Select
soft key:
Goto URL
: takes you to the site.
Edit
: allows you to edit the address.
Delete
: deletes the address.
Go To URL
(Menu 9.1.3)
This menu allows you to manually enter the URL address of
the Web site that you wish to access.
For further details about how to enter characters, see
page 43.
Clear Cache
(Menu 9.1.4)
You can clear the information stored in the cache, the phone’s
temporary memory which stores the most recently accessed
Web pages.
Press the
Yes
soft key to confirm the deletion. Otherwise,
press the
No
soft key.
Push Message
(Menu 9.1.5)
In this menu, you can receive and access web messages from
the server.
The following options are available:
Inbox
: allows you to read the messages received from the
web server.
Funbox
120
Receive
: allows you to set whether or not your phone
receives web messages.
Delete All
: allows you to delete all of the web messages.
Games
(Menu 9.2)
You can download MIDlets (Java applications running on
mobile phones) from various sources using the WAP Browser
and store them in your phone.
When you access the
Games
menu, the list of the default
games appears.
Using the
New Games
option, you can access the web site
provided by your service provider and download new games.
Once you have downloaded games, they are added to the list.
Note:
Java services may not be available depending upon the service
provider.
Launching a MIDlet
Note:
The procedure explained below is for the default games. For
downloaded games, the procedure may be different.
1. Scroll to the MIDlet you want on the Games list and press
the
Launch
soft key.
2. On the startup screen of the MIDlet, scroll to an option
using the Navigation keys.
The following options are available:
•
START GAME
: starts a new game.
•
CONTINUE
: allows you to continue the last game you
played.
Funbox
121
•
HIGH SCORE
: shows the high score table. This option
may not be available for some games.
•
HOW TO PLAY
: shows how to play the game and the key
functions for the game.
•
OPTION
: allows you to switch the game sound on or off.
3. Press the key to confirm your selection.
Viewing MIDlet Information
1. Scroll to the MIDlet you want and press the
Info
soft key.
The display shows information about the MIDlet, such as the
file size, application version and its vendor.
2. To scroll to other MIDlet information, press the Navigation
keys.
3. If you want to delete the MIDlet, press the
Delete
soft key
and then press the
Yes
soft key to confirm the deletion.
4. To exit and return to the Games screen, press the
Back
soft
key or the
C
key.
Note:
When you select the default games from the list, the
Delete
option is not available, so that you cannot delete them.
While you are playing a
game, to
Press the
adjust the sound volume Volume keys
stop the game and return to
the startup screen
C
key.
exit the game key.
Funbox
122
Entering Text
If you need to enter text while using a MIDlet, you can use the
following input modes:
Upper-case Character mode
(
A
): allows you to enter upper-
case English characters.
Lower-case Character mode
(
a
): allows you to enter lower-
case English characters.
Number mode
(
1
): allows you to enter numbers.
Symbol mode
: allows you to enter symbols, After highlighting
a symbol by pressing the Navigaition keys, press the key to
insert it.
T9 mode
(
T9
): allows you to enter English characters by
pressing one key per letter. In this mode, you can change the
case by pressing the
0
key.
To change the text input mode, press the key until the
appropriate indicator appears.
Sounds
(Menu 9.3)
In this menu, you can view the list of sounds downloaded from
the web server or received in multimedia messages. You can
set the downloaded sounds as the current ring tone or send
them to other phones.
Press the
Options
soft key to use the following options:
Rename
: allows you to change the name of the sound.
Delete
: deletes the sound.
Set as Ring Tone
: sets the sound as your ring tone.
Using the
New MegaTones
option on the sounds list, you can
access the web site provided by your service provider and
download new sounds.
Funbox
123
Images
(Menu 9.4)
In this menu, you can view the list of pictures downloaded from
the web server or received in messages. If you set a TV capture
image as the wallpaper in the
TV Image
menu (
Menu 4.2
), it
displays as My Photo.icn on the list.
You can set the downloaded pictures as the current background
image or send them to other phones.
By pressing the
Options
soft key, you can use the following
options:
Rename
: allows you to change the name of the image.
Delete
: deletes the image.
Set as Wallpaper
: sets the image as your wallpaper for the
idle screen.
Using the
New Wallpapers
option on the images list, you can
access the web site provided by your service provider and
download new images.
Delete All
(Menu 9.5)
This menu allows you to delete all of the downloaded items in
the Games, Sounds and Images folders. You can delete all of
the items at one time.
To Press the
select a folder to clear Up or Down key. To delete all of
your items, select
All
.
place a check mark
Mark
soft key.
remove a check mark
Unmark
soft key.
delete the marked items
Delete
soft key.
Funbox
124
When a confirming message displays, press the
Yes
soft key to
confirm.
Memory Status
(Menu 9.6)
You can check the amount of the memory being used and the
memory remaining for games, sounds and images.
Games
: the display shows the total, free and used space and
the number of the games you downloaded.
Sounds & Images
: the display shows the total, used and free
space, including the memory status used by sounds and
images.
Solving Problems
125
Solving Problems
If you are experiencing problems with your phone, perform the
following simple checks before contacting a service
professional. This may save you the time and expense of an
unnecessary service call.
When you switch your phone on, the following
messages may appear:
Insert SIM Card
●
Check that the SIM card is correctly installed.
Phone Locked Enter Password
●
The automatic locking function has been enabled. You must
enter the phone’s password before you can use the phone.
Enter PIN
●
You are using your phone for the first time. You must enter
the Personal Identification Number (PIN) supplied with the
SIM card.
●
The PIN Check feature is enabled. Every time the phone is
switched on, the PIN has to be entered. To disable this
feature, use the
PIN Check
menu (
Menu 6.6.1
).
Enter PUK
●
The PIN code was entered incorrectly three times in
succession and the phone is now blocked. Enter the PUK
supplied by your service provider.
Solving Problems
126
“No service,” “Network failure” or “Not done”
displays
●
The network connection was lost. You may be in a weak
signal area (in a tunnel or surrounded by buildings). Move
and try again.
●
You are trying to access an option for which you have not
taken out a subscription with your service provider. Contact
the service provider for further details.
You have entered a number but it was not dialed
●
Have you pressed the key?
●
Are you accessing the right cellular network?
Your correspondent cannot reach you
●
Is your phone switched on (the key pressed for more
than one second)?
●
Are you accessing the right cellular network?
Your correspondent cannot hear you speaking
●
Have you switched off the microphone?
●
Are you holding the phone close enough to your mouth? The
microphone is located at the bottom of the phone.
The phone starts beeping and “**Warning** Low
Battery” flashes on the display
●
Your battery is insufficiently charged. Recharge the battery.
Solving Problems
127
The audio quality of the call is poor
●
Check the signal strength indicator on the display ( ); the
number of bars indicates the signal strength from strong
( ) to weak ( ).
●
Try moving the phone slightly or moving closer to a window
if you are in a building.
No number is dialed when you recall a Phonebook
entry
●
Check that the number has been stored correctly, by using
the Phonebook Search feature.
●
Re-store the number, if necessary.
If the above guidelines do not help you to solve the
problem, take note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung after-sales service.
Health and Safety Infor mation
128
Health and Safety Information
Usage guidelines:
All about performance and safety
Getting the Most Out of Your Reception
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to
the signal strength icon. The more bars displayed, the stronger
the signal.
If you’re inside a building, being near a window may give you
better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically activated. If
your phone is active, it periodically rechecks service availability
or you can check it yourself by pressing any key. Anytime the
Power Save feature is activated, a message displays on the
screen. When a signal is found, your phone returns to standby
mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When
it’s turned on, it receives and transmits radio frequency (RF)
signals. When you use your phone, the system handling your
call controls the power level. This power can range from 0.006
watts to 0.2 watts in digital mode.
Health and Safety Information
129
Knowing Radio Frequency Safety
The design of your phone complies with updated NCRP
standards described below.
In 1991-92, the Institute of Electrical and Electronics Engineers
(IEEE) and the American National Standards Institute (ANSI)
joined in updating ANSI’s 1982 standard for safety levels with
respect to human exposure to RF signals. More than 120
scientists, engineers and physicians from universities,
government health agencies and industries developed this
updated standard after reviewing the available body of
research. In 1993, the Federal Communications Commission
(FCC) adopted this updated standard in a regulation. In August
1996, the FCC adopted hybrid standard consisting of the
existing ANSI/IEEE standard and the guidelines published by
the National Council of Radiation Protection and Measurements
(NCRP).
Maintaining Your Phone’s Peak Performance
Note:
For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the
warranty.
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
●
Hold the phone with the antenna raised, fully-extended and
over your shoulder.
●
Try not to hold, bend or twist the phone’s antenna.
●
Don’t use the phone if the antenna is damaged.
●
Speak directly into the phone’s receiver.
Health and Safety Infor mation
130
Maintaining Safe Use of and Access to Your
Phone
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN THE U.S.A., USE AN
ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET.
Using Your Phone While Driving
Talking on your phone while driving is illegal in some states.
Even where it’s not, it can divert your attention from driving.
Remember that safety always comes first.
When using your phone in the car:
●
Get to know your phone and its features, such as speed dial
and redial.
●
When available, use a hands-free device.
●
Position your phone within easy reach.
●
Let the person you are speaking to know you are driving; if
necessary, suspend the call in heavy traffic or hazardous
weather conditions.
●
Do not take notes or look up phone numbers while driving.
●
Dial sensibly and assess the traffic; if possible, place calls
when you stationary or before pulling into traffic.
●
Do not engage in stressful or emotional conversations that
may divert your attention from the road.
●
Dial
9
,
1
,
1
to report serious emergencies. It’s free from your
wireless phone.
Health and Safety Information
131
●
Use your phone to help others in emergencies.
●
Call special non-emergency wireless number when
necessary.
Following Safety Guidelines
Note:
Always turn off the phone in health care facilities and request
permission before using the phone near medical equipment.
To operate your phone safely and efficiently, always follow any
special regulations in a given area. Turn your phone off in areas
where use is forbidden or when it may cause interference or
danger.
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, RF signals from wireless
phones may affect inadequately shielded electronic equipment.
RF signals may affect improperly installed or inadequately
shielded electronic operating systems and/or entertainment
systems in motor vehicles. Check with the manufacturer or
their representative to determine if these systems are
adequately shielded from external RF signals. Also check with
the manufacturer regarding any equipment that has been
added to your vehicle.
Consult the manufacturer of any personal medical devices, such
as pacemakers and hearing aids, to determine if they are
adequately shielded from external RF signals.
Turning Off Your Phone Before Flying
Turn off your phone before boarding any aircraft. To prevent
possible interference with aircraft systems, the U.S. Federal
Aviation Administration (FAA) regulations require you to have
permission from a crew member to use your phone while the
Health and Safety Infor mation
132
plane is on the ground. To prevent any risk of interference, FCC
regulations prohibit using your phone while the plane is in the
air.
Turning Off Your Phone in Dangerous Areas
To avoid interfering with blasting operations, turn off your
phone when in a blasting area or in other areas with signs
indicating that two-way radios should be turned off.
Construction crews often use remote-control RF devices to set
off explosives.
Note:
Never transport or store flammable gas, liquid or explosives in the
compartment of your vehicle that contains your phone or
accessories.
Turn off your phone when you’re in any area that has a
potentially explosive atmosphere. Although it’s rare, your
phone or its accessories could generate sparks. Sparks could
cause an explosion or a fire resulting in bodily injury or even
death. These areas are often, but not always, clearly marked.
They include:
●
Fueling areas such as gas stations.
●
Below deck on boats.
●
Fuel or chemical transfer or storage facilities.
●
Areas where the air contains chemicals or particles such as
grain, dust or metal powders.
●
Any other area where you would normally be advised to turn
off your vehicle’s engine.
Restricting Children’s Access to your Phone
Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.
Health and Safety Information
133
Caring for the Battery
The guidelines listed below help you get the most out of your
battery’s performance.
●
Use only Samsung-approved batteries and desktop
chargers. These chargers are designed to maximize
battery life. Using other batteries or chargers voids your
warranty and may cause damage.
●
In order to avoid damage, charge the battery only in
temperatures that range from 32º F to 104º F
(0º C to 40º C).
●
Don’t use the battery charger in direct sunlight or in high
humidity areas, such as the bathroom.
●
Never dispose of the battery by incineration.
●
Keep the metal contacts on top of the battery clean.
●
Don’t attempt to disassemble or short-circuit the battery.
●
The battery may need recharging if it has not been used
for a long period of time.
●
It’s best to replace the battery when it no longer provides
acceptable performance. It can be recharged hundreds of
times before it needs replacing.
Don’t store the battery in high temperature areas for long
periods of time. It’s best to follow these storage rules:
Less than one month
32º F to 104º F (0º C to 40º C)
Disposal of Lithium Ion (Li-Ion) Batteries
For safe disposal options of your Li-Ion batteries, contact your
nearest Samsung-authorized service center.
●
For safety, do not handle a damaged or leaking Li-Ion
battery.
●
Be sure to dispose of your battery properly. In some areas,
the disposal of batteries in household or business trash may
be prohibited.
Health and Safety Infor mation
134
Acknowledging Special Precautions and FCC
FCC Notice
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be
eliminated.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection
Standard (NFPA-58). For a copy of this standard, contact the
National Fire Protection Association, One Batterymarch Park,
Quincy, MA 02269, Attn: Publication Sales Division.
Cautions
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this
equipment. Only use approved batteries, antennas and
chargers. The use of any unauthorized accessories may be
dangerous and void the phone warranty if said accessories
cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting,
bending or sitting on it.
Body-Worn Operation
SAR compliance for body-worn operating configurations is limited to the
specific belt-clip/ holster supplied or approved by Samsung, if available.
End-users must be informed of the body-worn operating requirements
for satisfying RF exposure compliance. The use of accessories that do
not satisfy these requirements may not comply with FCC RF exposure
Health and Safety Information
135
compliance and should be avoided.
For more information about RF exposure, please visit the FCC
website at www.fcc.gov.
SAR Values
●
Head: 0.942 (W/kg)
●
Body-worn: 0.202 (W/kg)
FDA Consumer Update
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF)
in the microwave range while being used. They also emit very
low levels of RF when in stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but
such findings have not been confirmed by additional research.
In some cases, other researchers have had difficulty in
reproducing those studies, or in determining the reasons for
inconsistent results.
What is FDA’s role concerning the safety of
wireless phones?
Under the law, FDA does not review the safety of radiation-
emitting consumer products such as wireless phones before
they can be sold, as it does with new drugs or medical devices.
Health and Safety Infor mation
136
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a
level that is hazardous to the user. In such a case, FDA could
require the manufacturers of wireless phones to notify users
of the health hazard and to repair, replace or recall the
phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone industry
to take a number of steps, including the following:
●
Support needed research into possible biological effects of
RF of the type emitted by wireless phones;
●
Design wireless phones in a way that minimizes any RF
exposure to the user that it is not necessary for device
function; and
●
Cooperate in providing users of wireless phones with the
best possible information on possible effects of wireless
phone use on human health.
FDA belongs to a interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
●
National Institute for Occupational Safety and Health
●
Environmental Protection Agency
●
Federal Communications Committee
●
Occupational Safety and Health Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities about wireless phones
with the Federal Communications Commission (FCC). All
phones that are sold in the United States must comply with
FCC safety guidelines that limit RF exposure. FCC relies on
Health and Safety Information
137
FDA and other health agencies for safety questions about
wireless phones.
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the wireless
exposures that people get from these base stations are typically
thousands of times lower than those they get from wireless
phones. Base stations are thus not the subject of the safety
questions discussed in this document.
What kinds of phones are the subject of this
update?
The term “wireless phones” refers here to hand-held wireless
phones with built-in antennas, often called “cell,” “mobile,” or
“PCS”. These types of wireless phones can expose the user to
measurable radio frequency energy (RF) because of the short
distance between the phone and the user’s head. These RF
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA
and other federal health and safety agencies. When the phone
is located at greater distances from the user, the exposure to
RF is drastically lower because a person’s RF exposure
decreases rapidly with increasing distance from the source. The
so-called “cordless phones” which have a base unit connected
to the phone wiring in a house, typically operate at far lower
per levels, and thus produce RF exposures far below the FCC
safety limits.
What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
Health and Safety Infor mation
138
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could Accelerate the
development of cancer in laboratory animals. However, many of
the studies that showed increased tumor development used
animals that had been genetically engineered or treated with
cancer-causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless
phones, so we don’t know with certainty what results of such
studies mean for human health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glaucoma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland, leukemia, or
other cancers. None of the studies demonstrated the existence
of any harmful health effects from wireless phones RF
exposures. However, none of the studies can answer questions
about long-term exposures, since average period of phone use
in these studies was around three years.
What research is needed to decide whether RF
exposure from wireless phones poses a health
threat?
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies
could be completed in a few years. However, very large
numbers of animals would be needed to provide reliable proof
of a cancer promoting effect if one exists. Epidemiological
studies can provide data that is directly applicable to human
populations, but ten or more years’ follow-up may be needed to
provide answers about some health effects, such as cancer.
This is because the interval between the time of exposure to a
Health and Safety Information
139
cancer-causing agent and the time tumors develop - if they do -
may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in measuring
actual RF exposure during day-to-day use of wireless phones.
Many factors affect this measurement, such as the angle at
which the phone is held, or which model of phone is used.
What is FDA doing to find out more about the
possible health effects of wireless phone RF?
FDA is working with the U.S. Toxicology Program and with
groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radio frequency
energy (RF).
FDA has been a leading participant in the World Health
Organization International Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of tis work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The project has also helped develop a series
of public information documents on EMF issues.
FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research and
Development Agreement (CRADA) to do research on wireless
phone safety. FDA provides the scientific oversight, obtaining
input from experts in government, industry, and academic
organizations. CTIA-funded research is conducted through
contracts to independent investigators. The initial research will
include both laboratory studies and studies of wireless phone
users. The CRADA will also include a broad assessment of
additional research needs in the context of the latest research
developments around the world.
Health and Safety Infor mation
140
How can I find out how much radio frequency
energy exposure I can get by using my wireless
phone?
All phones sold in the United States must comply with Federal
Communications Commission (FCC) guidelines that limit radio
frequency energy (RF) exposures. FCC established these
guidelines in consultation with FDA and other federal health
and safety agencies. The FCC limit for exposure from wireless
telephones is set at a Specific Absorption Rate (SAR) of 1.6
watts per kilogram (1.6 W/kg). The FCC limit is consistent
with the safety standards developed by the Institute of
Electrical and Electronic Engineering (IEEE) and the National
Council on Radiation Protection and Measurement. The
exposure limit takes into consideration the body’s ability to
remove heat from the tissue that absorb energy from the
wireless phone and is set well below levels known to have
effects.
Manufacturers of wireless phones must report the RF
exposure level for each model of phone to the FCC. The FCC
website (http://www.fcc.gov/oet/rfsafety) gives directions for
locating the FCC identification number on your phone so you
can find your phone’s RF exposure level in the online listing.
What has FDA done to measure the radio
frequency energy coming from wireless phones?
The Institute of Electrical and Electronic Engineers (IEEE) is
developing a technical standard for measuring the radio
frequency energy (RF) exposure from wireless phones and
other wireless hand sets with the participation and leadership
of FDA scientists and engineers. The standard,
“Recommended Practice for Determining the Spatial-Peak
Specific Absorption Rate (SAR) in the Human Body Due to
Wireless Communications Devices: Experimental
Techniques,” sets forth the first consistent test methodology
Health and Safety Information
141
for measuring the rate at which RF is deposited in the heads
of wireless phone users. The test method uses a tissue-
simulating model of the human head. Standardized SAR test
methodology is expected to greatly improve the consistency
of measurements made at different laboratories on the same
phone. SAR is the measurement of the amount of energy
absorbed in tissue, either by the whole body or a small part of
the body. It is measured in watts/kg (or milliwatts/g) of
matter. This measurement is used to determine whether a
wireless phone complies with safety guidelines.
What steps can I take to reduce my exposure to
radio frequency energy from my wireless phone?
If there is a risk from these products--and at this point we do
not know that there is--it is probably very small. But if you
are concerned about avoiding even potential risks, you can
take a few simple steps to minimize your exposure to radio
frequency energy (RF). Since time is a key factor in how
much exposure a person receives, reducing the amount of
time spent using a wireless phone will reduce RF exposure.
If you must conduct extended conversations by wireless
phone every day, you could place more distance between
your body and the source of the RF, since the exposure level
drops off dramatically with distance. For example, you could
use a headset and carry the wireless phone away from your
body or use a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about RF
exposure from these products, you can use measures like
those described above to reduce your RF exposure from
wireless phone use.
Health and Safety Infor mation
142
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want
to take steps to lower exposure to radio frequency energy (RF),
the measured described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and
the RF source will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless
phones at all. For example, the government in the United
Kingdom distributed leaflets containing such a recommendation
in December 2000. They noted that no evidence exists that
using a wireless phone causes brain tumors or other ill effects.
Their recommendation to limit wireless phone use by children
was strictly precautionary; it was not based on scientific
evidence that any health hazard exists.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Advancement of Medical instrumentation (AAMI). The final
draft, a joint effort by FDA, medical device manufacturers, and
many other groups, was completed on late 2000. This standard
will allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI.
FDA has tested hearing aids for interference from handheld
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
Health and Safety Information
143
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a “compatible” phone
and a “compatible” hearing aid at the same time. This standard
was approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmful interference be found to occur, FDA will conduct testing
to assess the interference and work to resolve the problem.
Where can I find additional information?
●
For additional information, please refer to the following
resources:
●
FDA web page on wireless phones
(http://www.fda.gov/cdrh/phones/index.html)
●
Federal Communications Commission FCC) RF Safety
Program
(http://www.fda.gov/oet/rfsafety)
●
International Commission on Non-Ionizing Radiation
Protection
(http://www.icnirp.de)
●
World Health Organization (WHO) International EMF Project
(http://www.who.int/emf)
●
National Radiological Protection Board (UK)
(http://www.nrpb.org.uk)
CTIA Safety Information
Exposure to radio frequency signals
Your wireless hand held portable telephone is a low power radio
transmitter and receiver. When it is ON, it receives and also
sends out radio frequency (RF) signals.
Health and Safety Infor mation
144
In August, 1996, the Federal Communications Commissions
(FCC) adopted RF exposure guidelines with safety levels for
hand-held wireless phones. Those guidelines are consistent
with the safety standards previously set by both U.S. and
international standard bodies:
●
ANSI C95.1 (1992)
●
NCRP Report 86 (1986)
●
ICNIRP (1996)
Those standards were based on comprehensive and periodic
evaluations of the relevant scientific literature. For example,
over 120 scientists, engineers, and physicians from universities,
government health agencies, and industry reviewed the
available body of research to develop the ANSI Standard
(C95.1).
The design of your phone complies with the FCC guidelines (and
those standards).
Antenna care
Use only the specified of approved replacement antenna.
Unauthorized antennas, modifications, or attachments could
damage the phone and may violate FCC regulations.
Phone operation
NORMAL POSITION: Hold the phone as you would any other
telephone with the antenna pointed up and over your shoulder.
Tips on efficient operation:
For your phone to operate most efficiently:
●
Extend your antenna fully.
●
Do not touch the antenna unnecessarily when the phone is in
use. Contact with the antenna affects call quality and may
Health and Safety Information
145
cause the phone to operate at a higher power level than
otherwise needed.
Driving
Check the laws and regulations on the use of wireless
telephones in the areas where you drive. Always obey them.
Also, if using your phone while driving, please:
●
Give full attention to driving--driving safety is your first
responsibility.
●
Use hands-free operation, if available.
●
Pull off the road and park before making or answering a call
if driving conditions so require.
Electronic devices
Most modern electronic equipment is shielded from RF signals.
However, certain electronic equipment may not be shielded
against RF signals from your wireless phone.
Pacemakers
The Health Industry Manufacturers Association recommends
that a minimum separation of six (6”) inches be maintained
between a hand-held wireless phone and a pacemaker to avoid
potential interference with the pacemaker. These
recommendations are consistent with the independent research
by and recommendations of Wireless Technology Research.
Persons with pacemakers:
●
Should ALWAYS keep the phone more than six inches from
their pacemaker when the pacemaker is turned on;
●
Should not carry the phone in a breast pocket;
●
Should use the ear opposite the pacemaker to minimize the
potential for interference.
Health and Safety Infor mation
146
●
If you have any reason to suspect that interference is
taking place, turn your phone OFF immediately.
Hearing aids
Some digital wireless phones may interfere with some hearing
aids. In the event of such interference, you may want to
consult your service provider (or call the customer service line
to discuss alternatives.) Optional for each phone
manufacturer.
Other medical devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if they are
adequately shielded from external RF energy. Your physician
may be able to assist you in obtaining this information.
Turn your phone OFF in health care facilities when any
regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may be using equipment
that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that
has been added to your vehicle.
Posted facilities
Turn your phone OFF in any facility where posted notices so
require.
Health and Safety Information
147
Aircraft
FCC regulations prohibit using your phone while in the air.
Switch OFF your phone before boarding an aircraft.
Blasting areas
To avoid interfering with blasting operations, turn your phone
OFF when in a “blasting area” or in areas posted: “Turn off
two-way radio”. Obey all signs and instructions.
Potentially explosive environments
Turn your phone OFF when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire resulting
in bodily injury of even death.
Areas with a potentially explosive atmosphere are often but
not always clearly marked. They include fueling areas such as
gasoline stations; below decks on boats; fuel or chemical
transfer or storage facilities; vehicles using liquified petroleum
gas (such as propane or butane); areas where the air
contains chemicals or particles, such as grain, dust, or metal
powders; and any other area where you would normally be
advised to turn off your vehicle engine.
For vehicles equipped with an airbag
An airbag inflates with great force. DO NOT place objects,
including both installed or portable wireless equipment, in the
area over the air bag deployment area. If in-vehicle wireless
equipment is improperly installed and the air bag inflates,
serious injury could result.
Health and Safety Infor mation
148
Owner's Record
The model number, regulatory number and serial number are
located on a nameplate inside the battery compartment. Record
the serial number in the space provided below. This will be
helpful if you need to contact us about your phone in the future.
Model: SGH-p705
Serial No.:
User Guide Proprietary Notice
T9 Text Input is licensed by Tegic Communications and is
covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat.
6,011,554 and other patents pending.
STANDARD LIMITED WARRANTY
149
STANDARD LIMITED
WARRANTY
What is Covered and For How Long?
SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P. (SAMSUNG) warrants
to the original purchaser ("Purchaser") that SAMSUNG’s
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for
the period commencing upon the date of purchase and
continuing for the following specified period of time after that
date:
Phone 1 Year
Batteries 1 Year
Leather Case/Pouch 90 Days
Holster 90 Days
Other Phone Accessories 1 Year
What is Not Covered?
This Limited Warranty is conditioned
upon proper use of Product by Purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting
from accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification of any
part of Product, including antenna, or cosmetic damage; (b)
equipment that has the serial number removed or made
illegible; (c) any plastic surfaces or other externally exposed
parts that are scratched or damaged due to normal use; (d)
malfunctions resulting from the use of Product in conjunction
with accessories, products, or ancillary/peripheral equipment
not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside
the United States or Canada.
STAN DAR D L IMI TED WARRA N T Y
150
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery
has been charged by a battery charger not specified or
approved by SAMSUNG for charging the battery, (ii) any of the
seals on the battery are broken or show evidence of tampering,
or (iii) the battery has been used in equipment other than the
SAMSUNG phone for which it is specified.
What are SAMSUNG’s Obligations?
During the applicable
warranty period, SAMSUNG will repair or replace, at
SAMSUNG’s sole option, without charge to Purchaser, any
defective component part of Product. To obtain service under
this Limited Warranty, Purchaser must return Product to an
authorized phone service facility in an adequate container for
shipping, accompanied by Purchaser’s sales receipt or
comparable substitute proof of sale showing the date of
purchase, the serial number of Product and the sellers’ name
and address. To obtain assistance on where to deliver the
Product, call Samsung Customer Care at 1-888-987-4357.
Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG’s sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases,
pouches and holsters will be warranted for a period of ninety
(90) days. All other repaired/replaced Product will be
warranted for a period equal to the remainder of the original
Limited Warranty on the original Product or for 90 days,
whichever is longer. All replaced parts, components, boards
and equipment shall become the property of SAMSUNG. If
SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
STANDARD LIMITED WARRANTY
151
What Are the Limits On SAMSUNG’s Liability?
EXCEPT AS
SET FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN,
PURCHASER TAKES THE PRODUCT “AS IS,” AND SAMSUNG
MAKES NO WARRANTY OR REPRESENTATION AND THERE ARE
NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS
FOR ANY PARTICULAR PURPOSE OR USE;
•
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
•
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
•
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
•
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL
BE CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY
KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL
IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY
OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE SAME
DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY
STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS,
SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN
ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY
DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE,
USE, OR MISUSE OF, OR INABILITY TO USE THE PRODUCT OR
ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS
OF USE OF THE PRODUCT OR FROM THE BREACH OF THE
EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
STAN DAR D L IMI TED WARRA N T Y
152
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES
ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR
GROSS NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG,
ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF
CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST
PURCHASER BY ANY OTHER PARTY. SOME STATES/
PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM
STATE TO STATE/PROVINCE TO PROVINCE.
THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN
THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER’S EXCLUSIVE REMEDY. IF ANY PORTION OF
THIS LIMITED WARRANTY IS HELD ILLEGAL OR
UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL
ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED
WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND
WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS
OR AS LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION
WITH THE PRODUCT. SAMSUNG MAKES NO WARRANTIES OR
REPRESENTATIONS AND THERE ARE NO CONDITIONS,
EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO
THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE
OR SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR
EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED
BY SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
STANDARD LIMITED WARRANTY
153
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-
PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE
PURCHASER AND THE DIRECT VENDOR, OWNER OR
SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG’s Product
pricing reflects this allocation of risk and the limitations of
liability contained in this Limited Warranty. The agents,
employees, distributors, and dealers of SAMSUNG are not
authorized to make modifications to this Limited Warranty, or
make additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer advertising
or presentation, whether oral or written, do not constitute
warranties by SAMSUNG and should not be relied upon.
Samsung Telecommunications America, L.P.
1301 E. Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2003 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior
written approval.
Specifications and availability subject to change without
notice. [080802]
Glossary
154
Glossary
To help you understand the main technical terms and
abbreviations used in this booklet and to take full advantage
of the features of your mobile phone, here are a few
definitions:
Active Folder
Ability to answer a call simply by opening the folder.
Call Forwarding
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or making
another call; you can then switch between the two calls, as
required.
Call Waiting
Informs you that you have an incoming call when you are
engaged on another call.
Caller Line Identification Services (Caller ID)
Services allowing subscribers to view or block the telephone
numbers of callers.
Dual Band
Ability to handle any of the following types of network: GSM
850 and GSM 1900 MHz bands, for greater call success and
wider roaming.
Glossary
155
EMS (Enhanced Message Service)
An adaptation of the Short Message Service (SMS) that allows
you to send and receive ring tones and the service provider’s
logo, as well as combinations of simple media to and from
EMS-compliant handsets. Because EMS is based on SMS, it
can use SMS centres the same way that SMS does. EMS
works on all Global System for Mobile communications (GSM)
networks. EMS senders can use text, melodies, pictures,
sounds, and animations to enhance the expressive power of
messages that are limited by the display constraints of mobile
devices.
GPRS (General Packet Radio Service)
New non-voice value-added service that allows information to
be sent and received across a mobile telephone network.
GPRS provides continuous connection to the Internet for
mobile phone and computer users. It is based on the Global
System for Mobile Communication (GSM) circuit-switched
cellular phone connections and the Short Message Service
(SMS).
GSM (Global System for Mobile Communication)
International standard for cellular communication,
guaranteeing compatibility between the various network
operators. GSM covers most European countries and many
other parts of the world.
Java
Programming language generating applications that can run
on all hardware platforms, whether small, medium or large,
without modification. It has been promoted for and geared
heavily to the Web, both for public Web sites and Intranets.
When a Java program runs from a Web page, it is called a
Glossary
156
Java applet. When it is run on a mobile phone or pager, it is
called a MIDlet.
MMS (Multimedia Message Service)
A message service for the mobile environment, standardized by
the WAP Forum and the 3rd Generation Partnership Program
(3GPP). For phone users, MMS is similar to Short Message
Service (SMS)-it provides automatic, immediate delivery of
user-created content from phone to phone. The message
addressing used is primarily phone numbers, thus the traffic
goes from phone to phone. MMS also provides support for e-
mail addressing, so that messages can be sent by e-mail. In
addition to the text content of SMS, MMS messages can contain
still images, voice or audio clips, and also video clips and
presentation information.
Multi-party Calling
Ability to establish a conference call involving up to five
additional parties.
Phone Password
Security code used to unlock the phone when you have selected
the option to lock it automatically each time it switches on.
PIN (Personal Identification Number)
Security code that protects the phone against unauthorized
use. The PIN is supplied by the service provider with the SIM
card. It may be a four to eight-digit number and can be
changed, as required.
Proxy Server
A proxy server resides between a Web client, such as a web
browser, and a real Web server and acts as an intermediary
between them. When some people browse a web site, their
Glossary
157
browser is not actually connecting to the web server. The
request from their browser goes to a proxy server, and the
proxy server makes the request to the web server. A proxy
server can improve performance for groups of users because it
cache the results of all requests for a certain amount of time. If
a user requests a web page that it already loaded for another
user, it reloads the page instead of forwarding the request to
the Web server, which can be a time-consuming operation.
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an incorrect PIN
has been entered three times in succession. The eight-digit
number is supplied by the service provider with the SIM card.
Roaming
Use of your phone when you are outside your home area (when
travelling for example).
SIM (Subscriber Identification Module)
Card containing a chip with all the information required to
operate the phone (network and memory information, as well
as the subscriber’s personal data). The SIM card fits into a
small slot on the back of the phone and is protected by the
battery.
SMS (Short Message Service)
Network service sending and receiving messages to and from
another subscriber without having to speak to the
correspondent. The message created or received can be
displayed, received, edited or sent.
Soft Keys
Two keys marke
d
and on the phone, the purpose of
which:
Glossary
158
●
varies according to the function that you are currently
using.
●
is indicated on the bottom line of the display just above the
corresponding key.
Voice Mail
Computerized answering service that automatically answers
your calls when you are not available, plays a greeting
(optionally in your own voice) and records a message.
Glossary
159
Glossary
160
161
Index
A
Access codes, 128
Active folder, 96
Alarm, 99
Alert type, 89
Alphabet mode,
text input, 45
Answering
call, 27
second call, 52
Anykey answer, 97
Auto redial, 96
B
Background im-
age, 93
Backlight
description, 16
time, 94
Battery
caring, 133
charging, 20
installing, 20
low indicator, 22
removing, 18
Broadcast mes-
sages, 69
Browser, WAP, 115
C
Calculator, 104
Calendar memos
copying, 102
deleting, 102
viewing, 102
writing, 101
Call back, mes-
sage, 63
Call cost, 85
Call records
incoming, 82
missed, 28, 82
outgoing, 83
Call time, 84
Caller groups
editing, 38
searching, 37
Caller ID, 114
Calls
answering, 27, 52
162
ending, 25
forwarding, 111
holding, 49
making, 25
redialing, 26
rejecting, 28
waiting, 52, 112
CB (Cell Broad-
cast) messages, 69
Characters, enter,
42
Charging battery,
20
Conference call, 53
Connect tone, 92
Currency ex-
change, 109
D
Dangerous Areas,
132
Date, set, 103
Deleting
calendar memos,
102
call records, 82
multimedia mes-
sages, 73,
74
phonebook, 36
task, 106
text messages,
62, 63
voice memos,
108
Delivery reports,
message, 78
Display
backlight, 16
external, 16
icons, 15
layout, 13
settings, 93
DTMF tones, send,
51
E
Earpiece volume,
27
EMS (Enhanced
Message Service),
62
Error tone, 91
External display,
163
16, 94
F
FCC Notice, 134
Flying, 131
Folder tone, 91
Forwarding
multimedia mes-
sage, 73
Forwardting, calls,
111
Funbox, 115
G
Games, 120
Graphic logo, 94
Greeting message,
95
H
Health and safety,
128
Holding, calls, 49
I
Icons, description,
15
Images, down-
loaded, 123
Inbox, messages
multimedia, 71
text, 62
Infrared, connect,
97
International calls,
25
Internet, 115
J
Java service, 120
K
Key volume, 27
Keypad tones
selecting, 90
sending, 51
Keys
description, 11
location, 10
shortcut, 97
L
Language, select,
96
Last number, redi-
al, 26
Low battery indi-
cator, 22
164
M
Memory status
downloaded
items, 124
multimedia mes-
sages, 81
phonebook, 41
text messages,
69
TV images, 88
Menu style, 94
Menus
accessing, 55
list, 56
Message tone, 90
Messages
cell broadcast, 69
greeting, 95
multimedia, 71
text, 62
voice, 69
web, 119
MIDlets, 120
Minute minder, 92
Missed calls, 28, 82
MMS (Multimedia
Message Service),
71
Morning call, 99
Multimedia mes-
sages
creating/sending,
75
deleting, 73, 74
editing, 75
reading, 71, 74
Multi-party calls,
53
Muting
all sounds, 50
key tones, 51
microphone, 50
N
Names
entering, 42
searching/dial-
ing, 37
Network selection,
113
Network services,
111
Numbers, phone
165
searching/dial-
ing, 37
storing, 33
O
On/off switch,
phone, 22
Organizer, 99
Outbox, messages
multimedia, 74
text, 63
Own number, 95
Owner's Record,
148
P
Peak Performance,
129
Phone
display, 13
icons, 15
keys, 11
layout, 10
resetting, 98
switching on/off,
22
unpacking, 9
Phone while driv-
ing, 130
Phonebook
copying, 36
deleting, 36, 40
editing, 36
options, 35
searching/dial-
ing, 37
speed-dialing, 39
storing, 33
Power on/off tone,
91
Power Save fea-
ture, 128
Problems, solve,
125
Push message, 119
R
Radio Frequency,
129
Received calls, 82
Received messag-
es
multimedia, 71
text, 62
Reception, 128
166
Recording
voice memos,
107
Redialing
automatically, 96
manually, 26
Resetting phone,
98
Ring tone, 89
Ring type, 89
Ring volume, 89
Roaming, 113
S
Safe Use of and
Access to Your
Phone, 130
Safety
information, 128
precautions, 7
Schedule, 100
Searching, phone-
book, 37
Security, calls, 96
Sent messages
multimedia, 74
text, 63
Service light, 16, 94
Shortcut, menu, 97
Silent mode, 30
SIM card
installing, 18
SMS (Short Mes-
sage Service)
inbox, 62
outbox, 63
Soft keys, 31
Sound settings, 89
Sounds, down-
loaded, 122
Special Precau-
tions, 134
Speed-dialing, 39
Switching on/off
microphone, 50
phone, 22
T
T9 mode, text in-
put, 43
Tasks, to do list
creating, 104
editing, 105
Television, 85
167
Templates
multimedia, 79
text, 66
Text input mode,
42
Text messages
creating/sending,
64
deleting, 62, 63
reading, 62, 63
setting, 67
Text, enter, 42
Time format, 103
Time, set, 103
To do list, 104
Tone
connect, 92
error, 91
folder, 91
keypad, 90
message, 90
minute minder, 92
power on/off, 91
ring, 89
Travel adapter, 20
TV images, 88
U
User Guide Propri-
etary Notice, 148
V
Vibration, 30, 90
Voice mail, 69
Voice memos
deleting, 108
playing, 108
recording, 107
Voice server, 69
Volume, adjust
earpiece, 27
keypad tone, 27
ring, 89
W
Waiting call, 112
Wallpaper, 93
WAP browser
cache, clear, 119
favorites, 118
home, access,
115
Watching televi-
sion, 85
World time, 103
Access the
Menu
Functions
➀
Press the
Menu
soft key.
➁
Scroll using the Up and
Down keys through the
list of the menus until you
reach the menu you want.
➂
Press the
Select
soft key.
➃
Scroll using the Up and
Down keys through the
list of the options until the
one you want is selected.
➄
Press the
Select
soft key.
• Each of the two soft keys ( and
) perform the function indicated by
the text above it on the bottom line in
the display.
Switch On/Off Press and hold the
key.
Make a Call
➀
Enter the number.
➁
Press the key.
End a Call Briefly press the key.
View Missed
Calls After
Missing Them
➀
Open the phone and
press the
View
soft
key.
➁
Scroll using the Up
and Down keys through
the missed calls.
➂
To return the call, press
the key.
Answer a Call Open the phone
or
Press the key.
Dual Band SGH-p705 GPRS Telephone
Quick Reference Card
Adjust the
Volume
Press the or key on the
left side of the phone.
Choose
the Alert
Typ e
➀
Select the
Alert Type
menu option (
Menu
5.3
).
➁
Select an option:
• Light only
•Melody
•Vibration
•Vibra+Melody
➂
Press the
Select
soft key.
View
Televi s i o n
➀
Connect the ear-
microphone to the jack at
the left side of the phone.
➁
Press and hold the TV
key.
➁
Select the channel using
the Left and Right keys.
Store
Numbers in
Phonebook
➀
Enter the number and press the
Save
soft key.
➁
Select a number type.
➂
Press the
Select
soft key.
➃
Select a memory.
➄
Press the
Select
soft key.
➅
Enter the name.
➆
Press the
OK
soft key.
➇
If necessary, change the location number.
➈
Press the
OK
soft key.
➉
Press the key to return to Idle Mode.
Search for a
Number in
Phonebook
➀
Press the
Ph.Book
soft key.
➁
Select the
Search
option.
➂
Enter the first few letters of the name.
➃
To scroll through the names, press the Up or
Down key.
➄
Press the
View
soft key.
➅
To scroll through the numbers, press the Up or
Down key.
➆
Press the key to dial.