Samsung Electronics Co SGHP710 Single-Band PCS GSM Phone User Manual
Samsung Electronics Co Ltd Single-Band PCS GSM Phone Users Manual
Users Manual
* Some of the contents of this manual may differ from your phone,
depending on the software installed or your service provider.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-xxxxxA
English. 08/2004. Rev 1.0
GPRS TELEPHONE
SGH-P710
Draft version 2004.08.19
Contents
3
Contents
Important safety precautions........................... 7
Unpacking ........................................................ 9
Your phone..................................................... 10
Phone layout........................................................... 10
Display ........................................................... 13
Display layout ......................................................... 13
Service light............................................................ 16
Camera .................................................................. 16
Getting started ............................................... 17
Installing the SIM card ............................................. 17
Charging the battery................................................ 19
Switching the phone on or off.................................... 21
Call functions ................................................. 22
Making a call........................................................... 22
Adjusting the volume ............................................... 24
Answering a call ...................................................... 25
Viewing missed calls ................................................ 26
Quickly switching to silent mode ................................ 28
Selecting functions and options...................... 29
Using the soft keys .................................................. 29
Selecting options ..................................................... 30
Phone book .................................................... 31
Storing a number with a name .................................. 31
Using phone book entry options................................. 34
Dialing a number from phone book ............................ 36
Speed dialling ......................................................... 37
Searching for and dialling a number in phone book....... 39
Editing a caller group ............................................... 41
Deleting all of the phone book entries......................... 42
Checking the memory status ..................................... 43
Using the service dialling numbers ............................. 43
FCC RF EXPOSURE INFORMATION
In August 1996 the Federal Communications Commission (FCC) of
the United States with its action in Report and Order FCC 96-326
adopted an updated safety standard for human exposure to radio
frequency electromagnetic energy emitted by FCC regulated
transmitters. Those guidelines are consistent with the safety
standards previously set by both U.S. and international standards
bodies. The design of this phone complies with the FCC guidelines
and these international standards.
Use only the supplied antenna or one that is approved.
Unauthorized antennas, modifications, or attachments could impair
call quality, damage the phone, or result in a violation of FCC
regulations.
Do not use the phone with a damaged antenna. If a damaged
antenna comes into contact with the skin, a minor burn may result.
Please contact your local dealer for a replacement antenna.
Body-worn Operation
This device was tested for typical body-worn operations with the back
of the phone kept 1.5 cm. from the body. To maintain compliance
with FCC RF exposure requirements, use only belt-clips, holsters
or similar accessories that maintain at least a 0.59 inch (1.5 cm.) separation
distance, between the user's body and the back of the phone, including
the antenna, whether extended or retracted. The use of belt-clips,
holsters and similar accessories should not contain metallic
components in its assembly. The use of accessories that do not
satisfy these requirements may not comply with FCC RF
exposure requirements, and should be avoided.
Vehicle Mounted External Antenna (optional, if
available.)
A minimum separation distance of 7.9 inches (20cm) must be
maintained between a person and the vehicle mounted external
antenna to satisfy FCC RF exposure requirements.
For more information about RF exposure, please visit the FCC web
site at www
Contents
4
Entering text .................................................. 44
Changing the text input mode ................................... 45
Using T9 mode ........................................................ 46
Using Alphabet mode ............................................... 48
Using Number mode................................................. 49
Using Symbol mode ................................................. 49
Options during a call ...................................... 52
Putting a call on hold................................................ 52
Switching the microphone off (Mute) .......................... 53
Muting or sending key tones...................................... 54
Sending a sequence of DTMF tones ............................ 54
Searching for a number in phone book ....................... 55
Using the message service........................................ 55
Call waiting............................................................. 56
Making a multi-party call .......................................... 56
Using the menus ............................................ 59
Accessing a menu function by scrolling ....................... 59
Using shortcuts ....................................................... 60
List of menu functions .............................................. 60
Messages........................................................ 67
Text messages
(Menu 1.1)
.......................................... 67
Multimedia messages
(Menu 1.2)
................................ 73
Push messages
(Menu 1.3)
........................................ 83
Delete all
(Menu 1.4)
................................................ 83
Voice mail
(Menu 1.5)
............................................... 84
Memory status
(Menu 1.6)
......................................... 84
Settings
(Menu 1.7)
.................................................. 85
Call records .................................................... 89
Missed calls
(Menu 2.1)
............................................. 89
Received calls
(Menu 2.2)
.......................................... 90
Dialled calls
(Menu 2.3)
............................................. 90
Delete all
(Menu 2.4)
................................................ 91
Call time
(Menu 2.5)
................................................. 92
Call cost
(Menu 2.6)
.................................................. 93
Camera........................................................... 94
Take and send
(Menu 3.1)
......................................... 94
My photos
(Menu 3.2)
............................................... 99
Video recorder
(Menu 3.3)
....................................... 100
Contents
5
Sound settings ............................................. 103
Ring tone
(Menu 4.1)
.............................................. 103
Ring volume
(Menu 4.2)
.......................................... 103
Alert type
(Menu 4.3)
.............................................. 104
Keypad tone
(Menu 4.4)
.......................................... 104
Message tone
(Menu 4.5)
........................................ 105
Folder tone
(Menu 4.6)
............................................ 106
Power on/off
(Menu 4.7)
.......................................... 106
Extra tones
(Menu 4.8)
............................................ 107
Alerts on call......................................................... 107
Phone settings ............................................. 108
Infrared activate
(Menu 5.1)
.................................... 108
Display settings
(Menu 5.2)
..................................... 112
Greeting message
(Menu 5.3)
.................................. 114
Own number
(Menu 5.4)
.......................................... 114
Language
(Menu 5.5)
.............................................. 115
Security
(Menu 5.6)
................................................ 115
Extra settings
(Menu 5.7)
........................................ 119
Short cut
(Menu 5.8)
............................................... 120
Reset settings
(Menu 5.10)
...................................... 120
Organizer ..................................................... 121
Alarm
(Menu 6.1)
................................................... 121
Calendar
(Menu 6.2)
............................................... 123
Time & Date
(Menu 6.3)
.......................................... 126
Calculator
(Menu 6.4)
.............................................. 128
To do list
(Menu 6.5)
............................................... 129
Voice memo
(Menu 6.6)
.......................................... 132
Currency exchange
(Menu 6.7)
................................. 134
PIM sync
(Menu 6.8)
............................................... 135
Network services.......................................... 126
Call diverting
(Menu 7.1)
......................................... 126
Call Barring
(Menu 7.2)
........................................... 127
Call waiting
(Menu 7.3)
........................................... 129
Network selection
(Menu 7.4)
................................... 130
Caller ID
(Menu 7.5)
............................................... 131
Closed User Group (CUG)
(Menu 7.6)
........................ 131
Band selection
(Menu 7.7)
....................................... 133
Contents
6
Funbox ......................................................... 134
WAP browser
(Menu 8.1)
......................................... 134
Games
(Menu 8.2)
.................................................. 140
Sounds
(Menu 8.3)
................................................. 142
Images
(Menu 8.4)
................................................. 143
Delete all
(Menu 8.5)
.............................................. 144
Memory status
(Menu 8.6)
....................................... 144
SIM AT ......................................................... 145
Solving problems.......................................... 146
Access codes ................................................ 149
Phone password .................................................... 149
PIN...................................................................... 150
PUK ..................................................................... 150
PIN2 .................................................................... 151
PUK2 ................................................................... 151
Barring password................................................... 152
Health and safety information ...................... 153
SAR certification information ................................... 153
Precautions when using batteries ............................. 154
Road safety .......................................................... 156
Operating environment........................................... 156
Electronic devices .................................................. 157
Potentially explosive environments........................... 159
Emergency calls .................................................... 160
Other important safety information .......................... 161
Care and maintenance............................................ 162
Glossary ....................................................... 164
Index ........................................................... 182
7
Important safety
precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road safety at all times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching off when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switchingoff in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switching off near all medical equipment
Switch off your phone near the medical equipment.
Hospitals or health care facilitiies may be using
equipment that could be sensitive to external RF
energy. Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
Water resistance
Your phone is not water-resistant. Keep it dry.
Important safety precautions
8
Sensible use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency call
Key in the emergency number for your present
location, then press the key. Give all the
necessary information as accurately as possible. Do
not end the call until given permission to do so.
Keeping small children away from your phone
Keep the phone and all its parts including
accessories out of the reach of small children.
Accessories and batteries
Use only Samsung-approved accessories and
batteries. Use of any unauthorized accessories
could damage your phone and may be dangerous.
Qualified service
Only qualified service personnel may repair your
phone. For more detailed safety information, see
“Health and safety information” on page 162.
CAUTION
RISK OF EXPLOSION IF A BATTERY IS REPLACED
BY AN INCORRECT TYPE
.
DISPOSE USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
9
Unpacking
Your package contains the following items:
Note:
The items supplied with your phone and
available accessories may be different,
depending on your country or service
provider.
You can obtain the following accessories for your
phone from your local Samsung dealer:
• Standard/Extended batteries
• Simple handsfree car kit
• Cigarette lighter adapter
• Travel charger/adapter
• Battery case
Handset Travel adapter
Battery
User’s manual Hand strap
10
Your phone
Phone layout
The following illustrations show the main elements
of your phone:
Microphone
Power on/off /
menu exit key
Volume/menu
browse keys
Dial/menu
c
onfirmation key
IrDA port
Headset jack
Soft key (right)
Navigation (Up/
Down/Right/
Cancel/
correction key
Earpiece
Display
Special
function keys
Alphanumeric
keys
Camera key
WAP Browser
key
Camera
Soft key (left)
External display
Antenna
Service Light
Your phone
11
Key
(s)
Description
In Menu mode, scroll through the menu
options and Phone Book.
In Idle mode, allow you to access your
favorite menu options directly. For
further details about shortcuts, see
page 125.
In Menu mode, the Left key returns to
the previous menu level and the Right
key selects the current menu.
When entering text, moves the cursor to
the left and right respectively.
In Idle mode, allows you to access your
favorite menu options directly. For
further details about shortcuts, see
page 125.
(soft keys)
Performs the functions indicated by the
text above them, on the bottom line of
the display.
In Idle mode, accesses the
Camera
menu to allow you to use the camera
application. Turns on the camera when
held down.
In Capture mode, works as a camera
shutter.
In Idle mode, launches the WAP
(Wireless Application Protocol) browser.
In Menu mode, selects the highlighted
main menu.
Your phone
12
Makes or answers a call.
In Idle mode, recalls the last number you
dialed or received when held down.
In Menu mode, selects a menu function
or stores information that you have
entered, such as a name in the phone or
SIM memory.
Deletes characters from the display.
In Menu mode, returns to the previous
menu level.
Ends a call. Also switches on and off the
phone when held down.
In Menu mode, cancels your input and
returns to Idle mode.
In Idle mode, quickly accesses your voice
mail when held down.
Enters numbers, letters and some special
characters.
Enters special characters.
Performs various functions.
(on the left side of the phone)
During a call, adjusts the earpiece
volume.
In Idle mode with phone open, adjusts
the keypad tone volume. With the phone
closed, turn on the external display when
held down.
In Menu mode, scrolls through the menu
options and Phone Book.
Key
(s)
Description
(continued)
13
Display
Display layout
The display has three areas:
Area Description
First line Displays various icons. See page 14.
Middle lines Displays messages, instructions and
any information that you enter, such
as the number you are dialing.
Last line Shows the current functions assigned
to the two soft keys.
Icons
Text and
graphic area
Soft key indicators
Menu Ph.Book
Display
14
Icons
Icon Description
Shows the received signal strength. The
greater the number of bars, the stronger the
signal.
Appears when a call is in progress.
Appears when you are out of your service
area. When it displays, you cannot make or
receive a call.
Appears when you are connected to the GPRS
network.
Appears when you are out of your home area
and have logged onto a different network; for
example, when traveling in other countries.
Appears when a new text message has been
received.
Appears when a new voice mail message has
been received.
Appears when a new multimedia message has
been received.
Appears when you set an alarm to ring at a
specified time.
Appears when Silent mode is active or when
you set the
Alert type
menu (
Menu 4.3
) so
that the phone vibrates when you receive a
call. For further details, see page 29 and
page 110 respectively.
Appears when the IrDA port is active. For
details, see page 113.
Display
15
Backlight
The backlight illuminates the display and the
keypad. When you press any key or open the
phone, the backlight turns on and remains on for a
given period of time, depending on your setting in
the
Back light
menu (
Menu 5.2.4
). When no keys
are pressed, the display turns off after one minute
to conserve your battery power.
To specify the length of time the backlight is active,
set the
Back light
menu. See page 118 for further
details.
External display
Your phone has an external display on the phone. It
indicates when you have an incoming call or a
message. It also alerts you at the specified time
when you have set an alarm by displaying the
corresponding icon on it.
When you close the phone, the display shows the
current time on an analogue clock. You can set the
display to show the current date instead of the
analogue clock using the
Front LCD display
menu
(
Menu 5.2.7
). You can also select how long the
date or analogue clock displays. For details, see
page 119.
Appears when Mute mode is active.
Shows the level of your battery. The more
bars you see, the more power you have
remaining.
Icon Description
(continued)
Display
16
Service light
The service light is on the top right corner of the
phone. It flashes when services are available on the
phone.
To activate or deactivate the service light, set the
Service light
menu (
Menu 5.2.5
). See page 118
for further details.
Camera
The camera module on the top center of your phone
allows you to take a photo and record a video while
on the move.
For further details about the Camera feature, see
page 101.
Service light
17
Getting started
Installing the SIM card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available and so on.
Important!
The plug-in SIM card and its contacts
can be easily damaged by scratches
or bending, so be careful when
handling, inserting or removing the
card.
Keep all SIM cards out of the reach of
small children.
1. If necessary, switch off the phone by holding
down the key until the power-off image
displays.
2. Remove the battery. To do so:
➀
Slide the battery lock towards the top of the
phone.
➁
Lift away the battery, as shown.
➀
➁
Getting started
18
3. Slide the SIM card into the SIM card socket, as
shown, so that it locks the card into position.
Make sure the gold contacts of the card face into
the phone.
Note:
When you need to remove the SIM card,
slide it upwards, as shown, and take it out
of the socket
.
4. Place the battery so that the tabs on the end
align with the slots at the bottom of the phone.
Getting started
19
5. Press down the battery until it clicks into place.
Make sure that the battery is properly installed
before switching on the power.
Charging the battery
Your phone is powered by a rechargeable Li-ion
battery. A travel adapter comes with your phone for
charging the battery. Use only approved batteries
and chargers. Ask your local Samsung dealer for
further details.
The travel adapter allows you to use the phone
while the battery is charging, but this causes the
phone to charge more slowly.
Note:
You must fully charge the battery before
using your phone for the first time. A
discharged battery is fully recharged in
approximately 200 minutes.
Getting started
20
1. With the battery in position on the phone, plug
the connector of the travel adapter into the jack
at the bottom of the phone.
2. Plug the adapter into a standard AC wall outlet.
3. When charging is finished, unplug the adapter
from the power outlet and disconnect it from the
phone by pressing the buttons on both sides of
the connector and pulling out the connector.
Note:
You must unplug the adapter before
removing the battery from the phone during
charging; otherwise, the phone could be
damaged.
➀
➁
➀
Getting started
21
Low battery indicator
When the battery is weak and only a few minutes of
talk time remain, a warning tone sounds and a
message repeats at regular intervals on the display.
If this happens, your phone turns off the backlight
to conserve the remaining battery power.
When the battery level becomes too low, the phone
automatically turns off.
Switching the phone on or off
1. Open the phone.
2. Press and hold the key until the phone
switches on.
3. If the phone asks you to enter a password, enter
the password and press the
OK
soft key. The
phone password is preset to “00000000” at the
factory. For further details, see page 159.
4. If the phone asks for a PIN, enter the PIN and
press the
OK
soft key. For further details, see
page 160.
The phone searches for your network and, after
finding it, the idle screen appears on the display.
Now, you can make or receive a call.
Note:
The display language is preset to English
at the factory. To change the language,
use the
Language
menu
(
Menu 5.5
). For further details, see
page 120.
5. When you wish to switch off the phone, press
and hold the key until the power-off image
displays.
22
Call functions
Making a call
When the idle screen displays, enter the area code
and phone number, and then the key.
Note:
When you activate the
Auto redial
option in
the
Extra settings
menu (
Menu 5.7
), the
phone automatically redials up to ten times if
the person does not answer the call or is
already on the phone. See page 124 for
further details.
Making an international call
1. Press and hold the
0
key.
The
+
character appears.
2. Enter the country code, area code, and phone
number and press the key.
Correcting the number
To clear Press the
the last digit
displayed
C
key.
any other digit
in the number
Left or Right key until the cursor is
immediately to the right of the digit
to be cleared. Press the
C
key. You
can also insert a missing digit
simply by pressing the appropriate
key.
the whole
display
C
key and hold it for more than one
second.
Call functions
23
Ending a call
When you want to end your call, briefly press the
key.
Redialing the last number
The phone stores the numbers you’ve dialed,
received or missed if the caller is identified. See
“Call records” on page 97 for further details.
To recall any of these numbers:
1. If you have typed characters on the display,
press the key to return to Idle mode.
2. Press the key to display a list of the last
numbers in the order you made or received
them.
3. Use the Up and Down keys to scroll through the
numbers until the number you want highlights.
4. T
o Press the
dial the number key.
edit the number
Options
soft key and select
Edit
. Change the number,
referring to “Correcting the
number” on page 22.
delete the
number
Options
soft key and select
Delete
.
delete all of the
numbers on the
Call log list
Options
soft key and select
Delete all
. For further details,
see page 97.
Call functions
24
Making a call from phone book
You can store phone numbers that you use
regularly in the SIM card or in the phone’s memory,
which are collectively called Phone Book.
Once you have stored numbers in Phone Book, you
can dial a number by pressing a few keys or assign
your most frequently-used numbers to number keys
using the Speed Dial feature.
For further details about the Phone Book feature,
see page 33.
Adjusting the volume
During a call, if you want to adjust the earpiece
volume, use the Volume keys on the left side of the
phone.
Press the key to increase the volume level and
the key to decrease the level.
In Idle mode with the phone open, you can also
adjust the keypad tone volume using these keys.
Call functions
25
Answering a call
When somebody calls you, the phone rings and
displays the incoming call image.
When the caller can be identified, the caller’s phone
number, or name if stored in your Phone Book,
displays.
1. If necessary, open the phone. Press the key
or the
Accept
soft key to answer the incoming
call.
When the
Anykey answer
option in the
Extra
settings
menu (
Menu 5.7
) is activated, you
can press any key to answer a call except for
the key and the
Reject
soft key. See
page 124.
When the
Active folder
option in the
Extra
settings
menu (
Menu 5.7
) is activated, you
can answer the call simply by opening the
phone. See page 124.
Note:
To reject the call, press and hold one of
the Volume keys, or press the
Reject
soft
key or key.
2. End the call by closing the phone or pressing
the key.
Note:
You can answer a call while using Phone Book
or menu features. After ending the call, the
phone returns to the function screen you
were using.
Call functions
26
Viewing missed calls
When you are unable to answer a call for any
reason, you can find out who called you so that you
can call the person back.
The number of calls you missed displays on the idle
screen immediately after a call is missed.
To view the missed call immediately:
1. If the phone is closed, open the phone.
2. Press the
View
soft key.
The number for the most recent missed call
displays, if available.
Editing a missed call number
Note:
When the number for the missed call is not
available, the
Edit
option does not display.
3.
To Press the
scroll through the
missed calls
Up or Down key.
call the number
displayed
key.
edit or delete a
missed call number
Select
soft key. See below.
Call functions
27
1. Press the
Options
soft key.
2.
Press the Up or Down key to highlight the
Edit
option.
3. Press the
Select
soft key.
4. Change the number.
Deleting a missed call
1. Press the
Options
soft key.
2. If necessary, press the Up or Down key to
highlight the
Delete
option.
3. Press the
Select
soft key.
You can press the key at any time to exit the
Missed Call feature.
Note:
You can access the Missed Call feature at any
time by selecting the
Missed calls
menu
(
Menu 2.1
). For further details, see page 97.
5.
To Press the
call the number key.
store the number
Save
soft key and enter the
name and location. For further
details, see page 31.
Call functions
28
Quickly switching to silent mode
Silent mode is convenient when you wish to stop
the phone from ringing, in a theatre for example.
In Idle mode, press and hold the
key until the
“Silent mode” message and the Vibration icon ( )
display.
In Silent mode, your phone changes the sound
settings as follows:
To exit and reactivate the previous sound settings,
press and hold the
key again until “Exit silent
mode” appears. The Vibration icon ( ) no longer
displays.
Notes:
• When you turn off the phone, Silent mode is
automatically deactivated.
• Activating Silent mode will not turn off the camera
shutter sound.
Option New setting
Alert type Vibration
Keypad tone Off
SMS-CB tone Light only
Folder tone Off
Power on tone Off
Error tones Off
29
Selecting functions
and options
Your phone offers a set of functions that allow you
to customize it. These functions are arranged in
menus and sub-menus, accessed using the two soft
keys marked and . Each menu and sub-
menu allows you to view and alter the settings of a
particular function.
Using the soft keys
The roles of the soft keys vary according to the
function you are currently using; the labels on the
bottom line of the display just above each key
indicate its current role.
Example:
Menu Ph.Book
Service Provider
Wed 06 Mar
Press the left soft key
to access Menu mode.
Press the right soft key
to access the Phone
Book features.
Selecting functions and options
30
Selecting options
To view the various functions and options available
and to select the one you want:
1. Press the appropriate soft key.
In some functions, you may be asked for a
password or PIN. Enter the code and press the
OK
soft key.
Note:
When you access a list of options, your
phone highlights the current option. If,
however, there are only two options, such as
On
/
Off
or
Enable
/
Disable
, your phone
highlights the option that is not currently
active so that you can select it directly.
2.
To Press the
select the:
• function displayed
• option highlighted
Select
soft key, Right key,
or key.
view the next
function or highlight
the next option on a
list
Down key or the key on
the left side of the phone.
move back to the
previous function or
option on a list
Up key or the key on the
left side of the phone.
move back up one
level in the structure
Left key,
soft key, or
C
key.
exit the structure
without changing
the settings
key.
31
Phone book
You can store phone numbers and their
corresponding names in both your SIM card and
your phone’s memories. They are physically
separate but are used as a single entity, called
Phone Book.
Note:
Depending on the manufacture of your SIM
card, the maximum number of phone
numbers the SIM card can store may differ.
Storing a number with a name
There are two ways to store a number:
•Using the
Save
soft key in Idle mode
•Using the
New entry
option in the Phone Book
menu
Storing a number in idle mode
As soon as you start to enter a number,
Save
appears above the left soft key to allow you to store
the number in Phone Book.
1. Enter the number you want to store.
Note:
If you make a mistake while entering a
number, correct it using the
C
key. For
further details, see page 22.
2. When you are sure that it is correct, press the
Save
soft key.
3. Select an icon to identify the category of the
number to be stored. Three categories are
available:
• : Mobile phone number
• : Office number
• : Home number
To select the category, press the Left or Right
key and press the
Select
soft key.
Phone book
32
4. Select a memory location, either
Phone
memory
or
SIM memory
, by pressing the Up
or Down key and press the
Select
soft key or
key.
Note:
When you change phones, any numbers
stored in your SIM card memory are
automatically available with the new
phone, whereas any numbers stored in
the phone’s memory must be reentered.
5. Enter a name and press the
OK
soft key.
For further details about how to enter
characters, see page 45.
After storing, the phone displays the Phone Book
entry or name you just created.
Storing a number using the phone book
menu
1. When the idle screen displays, press the
Ph.Book
soft key.
2. Scroll to
New entry
by pressing the Up or Down
key and press the
Select
soft key or key.
3. Select an icon to identify the category of the
number to be stored by pressing the Left or
Right key, and press the
Select
soft key.
Note:
The E-mail icon ( ) is available in this
step. It allows you to save an e-mail
address instead of a phone number.
6.
To Press the
use the entry
options
Options
soft key. For further
details, see page 34.
return to the idle
screen
key.
Phone book
33
4. Select a memory location, either
Phone
memory
or
SIM memory
, by pressing the Up
or Down key and press the
Select
soft key or
key.
Note:
When you are saving an e-mail address,
SIM memory
is not available.
5. Enter a name and press the
OK
soft key.
For further details about how to enter
characters, see page 45.
6. Enter the number or e-mail address you want to
store and press the
Save
soft key.
After storing, the phone displays the Phone Book
entry or name you just created.
7.
To Press the
use the entry
options
Options
soft key. For further
details, see page 34.
return to the idle
screen
key.
Phone book
34
Using phone book entry options
While accessing any Phone Book entry, press the
Options
soft key to access the options for the
entry.
The following options are available:
Paste
: allows you to paste the number into the
normal dialing mode. Use this option to dial a
number similar to one in Phone Book, such as a
different extension in the same office.
Use the
C
key to change the number as required;
see page 22 for further details. When you are ready
to dial, press the key.
Edit
: allows you to edit the name and number.
Select
One entry
to change the name and/or one
number for the selected entry. If you change the
name, the number is saved separately with the new
name.
Select
All entry
to change only the name of the
entry.
Photo Caller ID
: allows you to assign one of the
photos you took using the camera as a caller ID
image to be displayed when you receive a call from
To Press the
select the highlighted
option
Select
soft key, Right key, or
key.
highlight a different
option
Up or Down key until the
option you want highlights.
Phone book
35
the selected number. For details about the Camera
feature, see page 101.
Select a photo: allows you to select a photo for the
number.
View: displays the photo assigned to the number.
Delete caller ID: cancels the photo caller ID setting
for the number.
Delete
: allows you to delete the selected number
from Phone Book. You are asked to confirm that you
wish to delete the name and number by pressing
the
Yes
soft key.
Copy
: allows you to copy the number to another
location. You can select the memory and the
location number.
Caller group
: allows you to organize your Phone
Book entries in caller groups so that the phone
alerts you in a specific way when a person from one
of your groups calls you. Select one of the ten
groups available.
To remove an entry from a group, select the
No
group
option.
For further details about how to change caller group
properties, see page 42.
Add entry
: allows you to add a new number to the
currently selected name.
Send via IrDA
: allows you to send all numbers or
one number of the selected name to other IrDA-
compatible phones. For further details, see
page 116.
Phone book
36
Dialing a number from phone book
Once you have stored phone numbers in Phone
Book, you can dial them easily and quickly by using
the location numbers that were assigned to them in
Phone Book.
Dialing a number from the SIM card
1. In Idle mode, enter the location number of the
number you want to dial and press the key.
The list of the entries in the SIM card appears.
2. If necessary, scroll through the list using the Up
or Down key.
3. When the number displays, press the
Dial
soft
key or key.
Dialing a number from the phone’s
memory
1. In Idle mode, press and hold the
0
key. A
+
appears.
2. Enter the location number of the number you
want and press the key.
3. The list of the entries in the phone’s memory
appears.
4. If necessary, scroll through the list using the Up
or Down key.
5. When the number displays, press the
Dial
soft
key or key.
Phone book
37
Speed dialling
You can assign up to eight phone numbers from
Phone Book that you use most frequently to the
number keys (
2
to
9
), and then dial them easily
whenever you want, simply by pressing and holding
the associated number key.
Setting up speed-dial entries
1. When the idle screen displays, press the
Ph.
Book
soft key.
2. Scroll to
Speed dial
by pressing the Up or Down
key and press the
Select
soft key or key.
3. Select the key to which you wish to assign the
speed-dialing number, from among the
2
to
9
keys, and press the
Select
soft key.
Note:
Memory location 1 is reserved for your
Voice Mail server number.
If you have already assigned a number to the
key, the
Options
soft key replaces the
OK
soft
key. Go to step 6.
4. Select a Phone Book entry from the list and
press the
Select
soft key.
5. Select a number, if the entry has more than one,
by pressing the Up or Down key and press the
Select
soft key.
Phone book
38
6. Once you have assigned a number to the key,
you can use the following options by pressing
the
Options
soft key or key:
•
Change
: allows you to assign a different
number to the key.
•
Delete
: allows you to clear the setting so that
no number is assigned to the key.
•
Delete all
: allows you to clear the settings for
all keys so that no numbers are assigned to
any of the keys.
•
Number
: allows you to view the number
assigned to the key. You can dial the number
by pressing the key.
7. When you are finished, press the soft key or
key.
Speed-dialing from phone book
To speed-dial the numbers assigned to the
2
to
9
keys, press and hold the appropriate key.
Phone book
39
Searching for and dialling a number
in phone book
After storing numbers in Phone Book, you can
search for them in two ways; by name and by caller
group.
Searching for a number by name
1. When the idle screen displays, press the
Ph.Book
soft key.
2. Press the
Select
soft key or key when
Search
highlights. You are asked to enter a
name.
3. Enter the first few letters of the name that you
want to find.
The Phone Book entries are listed, starting with
the first entry matching your input.
5. Once you have found the entry, press the key
to dial the number, or press the
Options
soft
key to access the Phone Book entry options; for
further details, see page 34.
4.
To Press the
view the highlighted
entry
Select
soft key or
key.
select a different entry Up or Down key until
the entry highlights.
look for a name starting
with a different letter
key labeled with the
letter you want.
Phone book
40
Searching for a number by caller group
1. When the idle screen displays, press the
Ph.Book
soft key.
2. Scroll to
Group search
by pressing the Up or
Down key and press the
Select
soft key or
key. You are asked to enter a group name.
3. Enter the first few letters of the group name that
you want to find.
The caller groups are listed, starting with the
first group matching your input.
4. If necessary, scroll to a group by pressing the Up
or Down key and press the
Select
soft key.
The Phone Book entries in the caller group are
listed.
6. Once you have found the entry, press the key
to dial the number, or press the
Options
soft
key to access the Phone Book entry options; for
further details, see page 34.
5.
To Press the
view the highlighted entry
View
soft key.
select a different entry Up or Down key until
the entry you want
highlights.
Phone book
41
Editing a caller group
1. When the idle screen displays, press the
Ph.Book
soft key.
2. Scroll to
Group edit
by pressing the Up or Down
key and press the
Select
soft key or key.
3. Scroll through the group list by pressing the Up
or Down key.
4. When the group you want highlights, press the
Options
soft key or key.
5. Select each option and change the settings, as
you want. The following options are available:
•
Call ring tone
: allows you to set a ring tone
to be used when you receive a voice call from
a person in the group.
•
SMS tone
: allows you to set a ring tone to be
used when you receive a message from a
person in the group.
•
Graphic
: allows you to set a graphic icon to be
displayed when you receive a call from a
person in the group.
•
Group name
: allows you to assign a name to
the group. For further details about how to
enter characters, see page 45.
6. When you are finished, press the
C
or key.
Phone book
42
Deleting all of the phone book entries
You can delete all of the entries in the selected
memory or both memories.
1. When the idle screen displays, press the
Ph.Book
soft key.
2. Scroll to
Delete all
by pressing the Up or Down
key and press the
Select
soft key or key.
3. To place a check mark by the memory you want
to empty,
All
,
Phone memory
, or
SIM
memory
, press the
Mark
soft key.
You can remove the check mark by pressing the
Unmark
soft key.
4. When you are finished marking, press the
Delete
soft key to delete the entries in the
selected memory.
5. Enter the phone password and press the
OK
soft
key.
Note
: The password is preset to “00000000” at
the factory. To change this password, see
page 122.
6. When the confirmation message appears, press
the
Yes
soft key.
To cancel the deletion, press the
No
soft key.
7. When you are finished, press the
C
or key.
Phone book
43
Checking the memory status
You can check how many names and numbers are
stored in Phone Book, in both the SIM card and
phone memories. You can also see the capacity of
both memories.
Press the Up or Down key to view the number of
entries you stored and the total number of the
entries you can store in the SIM card and phone’s
memory.
Using the service dialling numbers
You can view the list of Service Dialing Numbers
(SDN) assigned by your network provider. These
numbers include emergency numbers, directory
enquiries, and voice mail numbers.
1. When the idle screen displays, press the
Ph.Book
soft key.
2. Select the
SDN
option by pressing the Up or
Down key and press the
Select
soft key or
key.
3. Scroll through the numbers by using the Up or
Down key.
4. To dial the number displayed, press the
Dial
soft
key or key.
44
Entering text
When using your phone, you will often need to
enter text, such as when storing a name in Phone
Book, creating your personal greeting or scheduling
events on your calendar. You can enter
alphanumeric characters by using your phone’s
keypad.
Your phone has the following text input modes:
•
T9 mode
This mode allows you to enter words with only
one keystroke per letter. Each key on the keypad
has more than one letter; for example, when you
press the
5
key once, J, K or L displays. T9 mode
automatically compares your keystrokes with an
internal linguistic dictionary to determine the
correct word, thus requiring far fewer keystrokes
than the traditional Alphabet mode.
•
Alphabet mode
This mode allows you to enter letters by pressing
the key labeled with the letter you want. Press
the key once, twice, three, or four times until it
displays.
•
Number mode
This mode allows you to enter numbers.
•
Symbol mode
This mode allows you to enter various symbols
and special characters.
Entering text
45
Changing the text input mode
When you are in a field that allows characters to be
entered, you will notice the text input mode
indicator on the display.
Example: Writing a text message
To select Press the right soft key
until
T9 mode displays. See page 47.
Alphabet mode displays. See page 48.
Number mode displays. See page 49.
Symbol mode the symbol list displays. See
page 49.
Options
Text input
mode indicator
Write New
Entering text
46
Using T9 mode
T9 ia a predictive text input mode that allows you to
key in any character using single keystrokes. This
text input mode is based on a built-in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word
by pressing the
2
to
9
keys. Press each key only
once for each letter.
Example: To enter “HELLO” in T9 mode, press
the
4
,
3
,
5
,
5
, and
6
keys.
The word that you are typing appears on the
display. It may change with each key that you
press.
2. Enter the whole word before editing or deleting
the keystrokes.
3. When the word displays correctly, go to step 4.
If not, press the
0
key or the Up or Down key
repeatedly to display alternative word choices
for the keys that you have pressed.
Example: Both “OF” and “ME” use the
6
and
3
keys. The phone displays the most
commonly used choice first.
4. Insert a space by pressing the key and start
entering the next word.
Entering text
47
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the
word you want to add, press the
0
or Down key
to display the alternative words.
2. When you press the
0
or Down key at the last
alternative word, the display shows
Add
on the
bottom line. Press the
Add
soft key.
3. If necessary, clear the word using the
C
key and
enter the word you want to add using Alphabet
mode. See page 48.
4. Press the
OK
soft key.
The word is added to the T9 dictionary and
becomes the first word for the associated
keypress.
• To enter periods, hyphens, or apostrophes, press
the
1
key. T9 mode applies grammar rules to
ensure that the correct punctuation is used.
Example: The
1
key is used twice to display two
punctuation marks:
• To shift the case in T9 mode, use the key.
There are three cases; Initial Capital ( ),
Capital lock ( ), and Lower case ( ).
• You can move the cursor by using the Left and
Right keys. To delete letters, press the
C
key.
Press and hold the
C
key to clear the display.
L E T ’ S E A T .
Entering text
48
Using Alphabet mode
Use the
1
to
0
keys to enter your text.
1. Press the keys labeled with the letter you want:
- Once for the first letter
- Twice for the second letter
- And so on
2. Select the other letters in the same way.
Note:
The cursor moves to the right when you
press a different key. When entering the
same letter twice or a different letter on the
same key, just wait for a few seconds for the
cursor to move to the right automatically,
and then select the next letter.
Refer to the table below for further details about the
characters available:
Characters in the order displayed
Key
Space
Upper case Lower case
Entering text
49
• To insert a space, press the key.
• To shift the case in Alphabet mode, use the
key. There are three cases; Capital lock ( ),
Lower case ( ), and Initial Capital ( ).
• You can move the cursor using the Left and Right
keys. To delete letters, press the
C
key. Press and
hold the
C
key to clear the display.
Using Number mode
Number mode enables you to enter numbers into a
text message. Press the keys corresponding to the
digits you want to enter.
Using Symbol mode
Symbol mode enbles you to insert symbols into a
text message.
To Press the
select a symbol corresponding number key.
display more symbols Up or Down key.
clear the symbol(s)
C
key. When the input field is
empty, this key returns the
screen to the previous mode.
insert the symbol(s)
into your message
OK
soft key.
return to the previous
mode
Back
soft key.
52
Options during a call
Your phone provides a number of control functions
that you can use during a call.
Putting a call on hold
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if your network supports this
service.
To place a call on hold, simply press the
Hold
soft
key. You can reactivate the call whenever you want,
by pressing the
Unhold
soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or
look it up in Phone Book.
For details about searching for a number in
Phone Book, see page 40.
2. Press the key to dial the second call.
The first call is automatically put on hold.
Or,
1. Put the current call on hold by pressing the
Hold
soft key.
2. Make the second call in the normal way.
When you have an active call and a call on hold, you
may switch between the two calls, changing the one
on hold to active and placing the other on hold.
To switch between the two calls, simply press the
Swap
soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other person.
When you want to finish, end each call normally by
pressing the key.
Options during a call
53
Switching the microphone off (Mute)
You can temporarily switch off your phone’s
microphone so that the other person on the phone
cannot hear you.
Example: You wish to say something to another
person in the room but do not want the
person on the phone to hear you.
To switch off the microphone temporarily:
1. Press the
Options
soft key.
2. Press the Down key to highlight the
Mute
option.
3. Press the
OK
soft key.
The other person can no longer hear you.
To switch the microphone back on:
1. Press the
Options
soft key.
2. If necessary, press the Down key to highlight the
Unmute
option.
3. Press the
OK
soft key.
The other person can hear you again.
Options during a call
54
Muting or sending key tones
These options allow you to turn off or on the key
tones. If the
Mute keys
option is selected, your
phone does not transmit the DTMF (Dual Tone Multi-
Frequency) tones of the keys, which allows you to
press keys without hearing annoying key tones
during a call.
Note:
To communicate with answering machines or
computerized telephone systems, the
Send
keys
option must be selected.
Sending a sequence of DTMF tones
You can send the DTMF tones after entering the
entire numbers you need to send.
This option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
To send the DTMF tones:
1. When you are connected to the teleservice
system, press the
Options
soft key.
2. Press the Down key to highlight the
Send DTMF
option.
3. Press the
OK
soft key.
4. Enter the number you want to send and press
the
OK
soft key.
The tones are sent.
Options during a call
55
Searching for a number in phone
book
You can search for a number in Phone Book during
a call.
1. Press the
Options
soft key.
2. Press the Down key to highlight the
Phone
book
option.
3. Press the
OK
soft key.
The Phone Book entries are listed.
4. Enter the name that you wish to find.
If you enter the first few letters of the name, the
Phone Book entries are listed, starting with the
first entry matching your input.
5. To view the highlighted entry, press the
View
soft key.
For further details about the Phone Book feature,
see page 33.
Using the message service
If you receive an SMS (Short Message Service)
message during a call, the Message icon ( )
flashes on the display. The
SMS service
option
enables you to read the message or send a new
message.
For further details about the Message feature, see
page 67.
Options during a call
56
Call waiting
You can answer an incoming call while you have a
call in progress, if your network supports this
service and you have set the
Call waiting
menu
(
Menu 7.3
) to
Activate
; see page 142. You are
notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press the key to answer the incoming call.
The first call is automatically put on hold.
2. To switch between the two calls, press the
Swap
soft key.
3. To end the call on hold, press the
Options
soft
key and select the
End held call
option.
To end the current call, press the key.
Making a multi-party call
A multi-party call is a network service that allows
up to six people to take part simultaneously in a
multi-party or conference call. For more information
about subscribing to this service, contact your
service provider.
Setting up the multi-party call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
3. To join the first participant to the multi-party
call, press the
Options
soft key and select the
Join
option. Press the
OK
soft key.
Options during a call
57
4. To add a new person to the multi-party call, call
the person in the normal way and press the
Options
soft key. Select the
Join
option and
press the
OK
soft key.
You can add incoming callers by answering the call,
pressing the
Options
soft key, and selecting the
Join
option. Repeat as required.
Having a private conversation with one
participant
1. Press the
Options
soft key and choose the
Select one
option. Press the
OK
soft key.
The list of call participants appears.
2. Highlight a person from the list by pressing
the Up or Down key, and press the
Select
soft
key or the key.
3. When the
Private
option highlights, press the
OK
soft key.
Now you can talk privately to that person. The
other participants can still converse with each
other.
4. To return to the multi-party call, press the
Options
soft key and select the
Join
option.
Press the
OK
soft key.
All the multi-party call participants can now hear
each other.
Options during a call
58
Dropping one participant
1. Press the
Options
soft key and choose the
Select one
option. Press the
OK
soft key.
The list of call participants appears.
2. Highlight a person from the list by pressing
the Up or Down key, and press the
Select
soft
key or the key.
3. Press the Down key to select the
Remove
option and press the
OK
soft key.
The call ends with that participant, but you can
continue to talk to the others.
4. When you want to end the multi-party call, press
the key.4
59
Using the menus
The phone offers a range of functions that allow you
to tailor it to your needs. These functions are
arranged in menus and sub-menus.
The menus and sub-menus can be accessed by
scrolling using the Navigation keys or by using the
shortcuts.
Accessing a menu function by
scrolling
1. In Idle mode, press the
Menu
soft key to access
Menu mode.
2. Scroll using Navigation keys to reach a main
menu,
Phone Settings
for example. Press the
Select
soft key or key to enter the menu.
3. If the menu contains sub-menus,
Language
for
example, you can access them by scrolling using
the Up or Down key and pressing the
Select
soft key, the Right key, or key.
If the menu that you have selected contains
further options, repeat this step.
4.
To Press the
scroll through the
menus
Up or Down key, or use the
Volume keys.
confirm the chosen
setting
Select
soft key, the Right
key, or key.
return to the
previous menu level
soft key, the Left key, or
the
or
C
key.
exit the menu
without changing
the settings
key.
Using the menus
60
Using shortcuts
Menu items, such as menus, sub-menus, and
options, can be accessed quickly by using their
shortcut numbers. For the main menus, you can
access any one of them by pressing the number
keys (
1
to
9
) corresponding to their location on the
screen.
Press the
Menu
soft key and enter the number of
the menu you want.
Notes:
• The numbers assigned to each menu are indicated
on the list on page 61.
• For the menu number 10, use the
0
key.
Example: Accessing the
Language
menu.
1. Press the
Menu
soft key.
2. Press the
5
key for
Phone settings
.
3. Press the
5
key for
Language
.
The languages available display.
List of menu functions
The following list shows the menu structure
available and indicates the number assigned to
each option and the page where you can find a
description of each feature.
Using the menus
61
1. Messages
(see page 67)
1.1 Text messages
1.1.1 Write new
1.1.2 Inbox
1.1.3 Outbox
1.1.4 Templates
1.2 Multimedia messages
1.2.1 Write new
1.2.2 Inbox
1.2.3 Outbox
1.2.4 Draft
1.2.5 Templates
1.3 Push messages
1.3.1 Inbox
1.3.2 Receive
1.3.3 Delete all
1.4 Delete all
1.4.1 Text messages
1.4.2 Multimedia messages
1.5 Voice mail
1.5.1 Connect to voice server
1.5.2 Voice server number
1.6 Memory status
1.6.1 Text messages
1.6.2 Multimedia messages
1.7 Settings
1.7.1 Text messages
1.7.2 Multimedia messages
1.7.3 MMS profile
1.8 Broadcast
Using the menus
62
2. Call records
(see page 89)
2.1 Missed calls
2.2 Received calls
2.3 Dialled calls
2.4 Delete all
2.5 Call time
2.5.1 Last call time
2.5.2 Total sent
2.5.3 Total received
2.5.4 Life time
2.5.5 Reset timers
2.6 Coll cost
2.6.1 Last call cost
2.6.2 Total cost
2.6.3 Max cost
2.6.4 Reset counters
2.6.4 Set max cost
2.6.6 Price/Unit
3. Camera
(see page 94)
3.1 Take and send
3.2 My photos
3.3 Video recorder
3.3.1 Record
3.3.2 Files
3.3.3 Sample video
3.4 Memory status
Using the menus
63
4. Sound settings
(see page 103)
4.1 Ring tone
4.2 Ring volume
4.3 Alert type
4.4 Keypad tone
4.5 Message tone
4.5.1 SMS tone
4.5.2 SMS-CB tone
4.5.3 MMS tone
4.6 Folder tone
4.7 Power on/off
4.8 Extra tones
4.9 Alerts on call
5. Phone settings
(see page 108)
5.1 Infrared activate
5.1.1 With PC
5.1.2 With other phone
5.2 Display settings
5.2.1 Wallpaper
5.2.2 Menu style
5.2.3 Back light
5.2.4 Service light
5.2.5 Graphic logo
5.2.6 Front LCD display
5.3 Greeting message
5.4 Own number
5.5 Language
Using the menus
64
5. Phone settings
(continued)
5.6 Security
5.6.1 PIN check
5.6.2 Change PIN
5.6.3 Phone lock
5.6.4 Change password
5.6.5 Privacy
5.6.6 SIM lock
5.6.7 FDN mode
5.6.8 Change PIN2
5.7 Extra settings
5.8 Short cut
5.8.1 Key up
5.8.2 Key down
5.8.3 Key right
5.8.4 Key left
5.9 Reset settings
6. Organiser
(see page 121)
6.1 Alarm
6.1.1 Once alarm
6.1.2 Daily alarm
6.1.3 Morning call
6.1.4 Remove alarm
6.1.5 Autopower
6.2 Calendar
6.3 Time & Date
6.3.1 Set time
6.3.2 Set date
6.3.3 World time
6.3.4 Time format
6.4 Calculator
Using the menus
65
6. Organiser
(continued)
6.5 To do list
6.6 Voice memo
6.6.1 Record
6.6.2 Memo list
6.6.3 Delete all
6.6.4 Memory status
6.7 Currency exchange
6.8 PIM sync
6.8.1 Start sync
6.8.2 View result
6.8.3 Sync settings
7. Network services
(see page 141)
7.1 Call diverting
7.1.1 Divert always
7.1.2 Busy
7.1.3 No reply
7.1.4 Unreachable
7.1.5 Cancel all
7.2 Call barring
7.3 Call waiting
7.4 Network selection
7.5 Caller ID
7.6 Closed user group
7.7 Band selection
Using the menus
66
8. Funbox
(see page 145)
8.1 WAP browser
8.1.1 Home
8.1.2 Bookmarks
8.1.3 http://
8.1.4 Settings
8.1.5 Clear cache
8.2 Games
8.3 Sounds
8.4 Images
8.5 Delete all
8.6 Memory status
8.6.1 Games
8.6.2 Sounds & Images
9. SIM AT
67
Messages
Using the
Messages
menu, you can use various
message features, such as:
• short text messages
• multimedia messages
• e-mail messages
• WAP push messages
•voice mail
Text messages
(Menu 1.1)
Short Message Service (SMS) allows you to send
and receive short text messages to and from other
GSM mobile phones. In addition, your phone
supports the Enhanced Messaging Service (EMS),
which enables you to include simple pictures,
melodies, and animated images in your messages.
To use this feature, you must subscribe to your
service provider’s message service.
When the Text Message icon ( ) appears, you
have received new text messages. If the memory is
full, an error message displays and you cannot
receive any new messages. Use the
Delete
option
in each message box to delete the obsolete ones.
Write new
(Menu 1.1.1)
In this menu, you can write and send a text
message.
Note:
When you add media objects to the
message, the number of characters you can
enter decreases.
Messages
68
Creating a simple text message
1. Create your message.
Note
: For further details about entering
characters, see page 45.
2. When you finish entering the message, press
the
Options
soft key. The following options are
available:
•
Send only
: allows you to send the message.
The message is deleted after sending.
•
Save and send
: allows you to save a copy of
the message and then send the message. You
can read the message in your Outbox.
•
Save only
: allows you to save the message so
that it can be sent later. You can read the
message in your Outbox.
• For further details about
Text formatting
,
Add objects
,
Add templates
,
Add
phonebook
,
Add bookmark
and
Language
options, see page 69.
3. Select
Send only
or
Save and send
, and press
the
Select
soft key or key.
If you want to just save the message, select
Save only
. After saving the message, the phone
returns to the
Text messages
menu.
4. If you select a save option, choose the memory
location and press the
OK
soft key or key.
5. Enter a destination number and press the
OK
soft key.
The message is sent.
Note:
When the phone fails to send the message, it
will ask you if you want to retry. Press the
OK
soft key to confirm. Otherwise, press the
Exit
soft key to return to the Write new screen.
Messages
69
Creating a message using the options
1. Create a message.
2. Press the
Options
soft key.
3. Select one of the following options by using the
Up and Down keys and pressing the
Select
soft
key or key:
•
Text formatting
: allows you to format the
style of the text.
For the
Size
attribute,
Normal
,
Large
, and
Small
sizes are available. For the
Bold
,
Italic
,
Underline
, and
Strikethrough
attributes,
select
On
or
Off
.
These attributes can be combined.
•
Add objects
: allows you to add a sound,
melody, picture, or animated image to the
message. Select the category of the object to
be added. In each category, you can select
from the various factory-set items or choose
an item received from other sources, such as
the Internet or other phones.
•
Add templates
: allows you to apply one of
the preset message templates to the text.
Select one of nine messages stored in the
Templates
menu (
Menu 1.1.4
). For further
details, see page 72.
•
Add phonebook
: allows you to add a Phone
Book entry to your message. Select one from
the list.
•
Add bookmark
: allows you to add a web
page’s address stored in your Bookmark list
(
Menu 8.1.2
). Select one from the list.
Messages
70
•
Language
: allows you to change the language
to be used in T9 input mode. Select the
language you want to use.
4. Complete the message, and send or save it by
following the procedure from step 2 on page 68.
Inbox
(Menu 1.1.2)
This message box is used to store the messages
that you have received.
When you enter this menu, the list of messages in
the box displays with the senders’ phone numbers
or names, if available in your Phone Book. The icons
on the left tell you the status of the messages:
• : Messages that have been opened.
• : Messages that are unopened.
1. Select a message from the list and press the
Select
soft key or key to read the message
contents.
2. To scroll through the contents, press the Up or
Down key.
3. To scroll to the previous or next message, press
the or key.
While reading a message, you can choose the
following options by pressing the
Options
soft key:
Delete
: allows you to delete the message.
Send
: allows you to send/resend the message. For
further details about how to send a message, see
page 68.
Text reply
: allows you to reply to the sender by
sending a text message.
Messages
71
Call back
: allows you to call the sender back.
Cut address
: allows you to extract the sender’s
number and URL, e-mail addresses, or phone
numbers from the message text.
Move to phone
: allows you to move the message
from the SIM card to the phone’s memory. This
option is only available when you select a message
stored in the SIM card.
Move to SIM
: allows you to move the message
from the phone’s memory to the SIM card. This
option is only available when you select a message
stored in the phone’s memory.
Select object
: allows you to save media objects,
such as sounds or images, from the message into
your phone. You can use the objects when writing a
message. For details, see page 69.
Outbox
(Menu 1.1.3)
This message box is used to store the messages
that you have already sent or will send.
When you enter this menu, the list of messages in
the box displays with the recipients’ phone numbers
or names, if available in your Phone Book. The icons
on the left tell you the status of the messages:
• : Messages currently being sent
• : Messages sent
• : Messages your phone couldn’t send
• : Messages to be sent
• : Messages deferred
1. Select a message from the list and press the
Select
soft key or key to read the message
contents.
Messages
72
2. To scroll through the contents, press the Up or
Down key.
3. To scroll to the previous or next message, press
the or key.
While reading a message, you can choose the
following options by pressing the
Options
soft key:
Delete
: allows you to delete the message.
Send
: allows you to send/resend the message. For
further details about how to send a message, see
page 68.
Cut address
: allows you to extract the destination
number and URL, e-mail addresses, or phone
numbers from the message text.
Move to phone
: allows you to move the message
from the SIM card to the phone memory. This
option is only available when you select a message
stored in the SIM card.
Move to SIM
: allows you to move the message
from the phone’s memory to the SIM card. This
option is only available when you select a message
stored in the phone’s memory.
Select objects
: allows you to save media objects,
such as sounds or images, from the message into
your phone. You can use the objects when writing a
message. For details, see page 69.
Templates
(Menu 1.1.4)
Using this menu, you can use one of preset
messages to make new messages.
Select a message from the list and press the
Options
soft key or key.
Messages
73
The following options are available:
Edit
: allows you to write a new message or edit the
message.
Note:
For further details about how to enter characters,
see page 45.
Send message
: allows you to retrieve the
message. Once you have completed the message,
you can send, save and send, or simply save it. For
further details about how to send a message, see
page 67.
Delete
: allows you to delete the message. You are
asked to confirm the deletion by pressing the
Yes
soft key.
Multimedia messages
(Menu 1.2)
This menu allows you to use the Multimedia
Message Service.
Multimedia Message Service (MMS) is a messaging
service very similar to Short Message Service
(SMS). It provides automatic and immediate
delivery of personal multimedia messages from
phone to phone or from phone to e-mail.
In addition to the familiar text content of text
messages, multimedia messages can contain
images, graphics, voice and audio clips. An MMS
message is a multimedia presentation in a single
entry. It is not a text file with attachments.
Using the MMS feature, your phone can receive and
send messages that contain multimedia files, such
as your photos, sounds and images you downloaded
from the Internet, and voice memos you recorded.
Messages
74
This function is available only if it is supported by
your service provider. Only phones that offer
multimedia message features can receive and
display multimedia messages.
Write new
(Menu 1.2.1)
This menu allows you to create a new multimedia
message and then send it to multiple destinations.
Creating and sending a multimedia message
1. Enter the subject of your message and press the
OK
soft key.
For further details about entering characters,
see page 45.
2. When
Add here
highlights, press the
Options
soft key and add the message contents using
one of the following options:
•
Add text
: enter the message text and press
the
OK
soft key.
•
Add my photo
: allows you to add a photo you
took using the camera on your phone. Select
Take photos
to take a new photo, or
My
photos
to add one of the photos stored in the
phone. For further details about using the
camera, see page 94.
•
Add my video
: allows you to add a video file.
Select
New video
to record a new video, or
My video
to add one of the video files stored
in the phone. For further details about using
the camera, see page 94.
•
Add picture
: allows you to add a picture
stored in the
Images
folder (
Menu 8.4
).
Choose a picture and press the
Select
soft
Messages
75
key. You may not be able to add some
downloaded images if they are not in the
correct format.
•
Add sound
: allows you to add a sound file.
Select
Record
to record a new voice memo, or
Sound list
to add one of the sounds in the
Sounds
folder (
Menu 8.3
) or voice memo list
(
Menu 6.6.2
). You may not be able to add
some downloaded sounds if they are not in the
correct format.
•
Send
: allows you to send the message. Use
this option when you finish creating the
message.
•
Save
: saves the message in the
Draft
(
Menu
1.2.4
) or
Templates
(
Menu 1.2.5
) box for
later use.
•
Settings
: allows you to change the message
settings. For details about setting options, see
page 86. After changing the settings, you need
to press the soft key or the
C
key to go to
back to the options screen.
•
Add destination
: allows you to enter
destination numbers or addresses. See steps 6
to 10 starting from page 77. After adding
them, you need to press the soft key or the
C
key to go to back to the options screen.
•
Preview
: shows your message as it will
display on the recipient’s phone.
Note:
You can add text, an image and a sound
once for each page.
3. Repeat step 2 until you finish creating your
message.
Messages
76
4. If you want to change the added items, press
the Up or Down key to highlight one and press
the
Options
soft key.
Note
: The options available are different
depending on whether the item you select
on the message screen is text, an image,
sound or the page field.
The following options are available:
•
Edit text
/
picture
/
sound
: allows you to
change the text or replace the image or sound
with another one.
•
Add page
: allows you to add up to five pages.
After you add a page, the display shows you
the current page number and the memory
space used for the page. You can move to
each page using the Left or Right key on the
message screen.
•
Delete
: deletes the item from your message.
•
Duration
: allows you to set when and how
long text, an image, a sound, or a page
displays on the message presentation screen.
If the duration you set is shorter than the
content duration for a particular page, the
content duration is automatically decreased.
•
Send
: allows you to send the message.
•
Save
: saves the message in the
Draft
(
Menu
1
.
2.4
) or
Templates
(
Menu 1.2.5
) box for
later use.
•
Settings
: allows you to change the message
settings. For details about setting options, see
page 86.
Messages
77
•
Add destination
: allows you to enter
destination numbers or addresses. See steps 6
to 10.
•
Preview
: shows your message as it will
display on the recipient’s phone.
5. When you are finished creating the message,
choose
Send
from the options and press the
Select
soft key or key.
6. Select a destination type (
To
,
Cc
or
Bcc
) and
press the
Select
soft key or key.
7. Choose one of the following options and press
the
Select
soft key or key:
•
Phone number
: allows you to enter the
phone number you want.
•
E-mail address
: allows you to enter the e-
mail address of the recipient.
•
Phone book
: allows you to retrieve a number
from your Phone Book.
8. Enter a number or an e-mail address, or select a
number from Phone Book.
9. When the correct number or address displays,
press the
OK
soft key.
10.To add a destination, press the
Select
soft key
or key when
Add destination
highlights.
Repeat from step 7.
If you want to edit the destinations, select one
and press the
Select
soft key or key. You can
change or delete it.
11.To enter additional numbers or addresses to the
other destination types, press the
C
key or the
soft key and repeat steps 6 through 10.
You can enter up to 10 destinations each for
To
,
CC
and
Bcc
.
Messages
78
12.When you are finished entering the destinations,
select
Send message
and press the
Select
soft
key or key.
Your phone sends the message.
Inbox
(Menu 1.2.2)
Viewing a message when you receive it
When a new multimedia message comes in, the
display shows a text notification along with the
sender’s number.
1. Press the
Select
soft key to view brief
information about the message, such as the
sender’s number, the message size and the
subject.
If you want to view the message later in the
Inbox, press the
Exit
soft key.
2. To scroll through the message information, press
the Up or Down key.
3. Press the
Options
soft key to use the following
options:
•
Retrieve
: retrieves the message from the
MMS server.
•
Delete
: deletes the message.
•
More properties
: shows you detailed
information about the message.
4. To read the message, press the
Select
soft key
when
Retrieve
is highlighted.
Your phone retrieves the message contents from
the server and displays it.
Messages
79
5. To scroll through the message, press the Up or
Down key.
6. When you are finished, press the key.
Viewing a received message in the inbox
When you access the
Inbox
menu (
Menu 1.2.2
),
the list of multimedia messages you received
displays with the senders’ phone numbers, if they
are available in your Phone Book, or subjects. The
icons on the left tell you the status of the messages.
• : Messages that have been opened.
• : Messages you sent an enquiry to the MMS
server for retrieving it.
• : Messages the phone is retrieving from the
MMS server.
• : Messages the phone couldn’t retrieve.
• : Messages that are unopened.
1. Select a message on the list and press the
Select
soft key.
The message displays and scrolls to the next
page, if it has one, after a specified time.
2. Press the
OK
soft key to go to the message view
screen.
Or, the display automatically switches to the
screen after a few seconds.
3. To scroll through the message, press the Up or
Down key.
If the message has more than one page, you
can scroll through the pages by using the Left
and Right keys.
Messages
80
While viewing a message, you can choose the
Message options by pressing the
Options
soft key.
If you are viewing a new message, the options are
the same as when you view a message as soon as
you receive it. See page 78.
When you are reviewing a message retrieved from
the MMS server, the following options are available:
Delete
: deletes the message.
Reply
: allows you to reply to the sender by sending
a text or multimedia message.
Call back
: allows you to call the sender back.
Cut address
: allows you to extract the sender’s
number or e-mail address and URL, e-mail
addresses or phone numbers from the message
text.
Forward
: allows you to send the message to
another person.
Save picture
: allows you to save an image from
the message into your phone. Images are stored in
the
Images
folder (
Menu 8.4
).
Save sound
: allows you to save a sound from the
message into the
Sounds
folder (
Menu 8.3
).
Properties
: shows you information about the
message, such as the message status, subject,
sender’s address or phone number, message size,
transaction ID, MMS version, and time and date
when the message was received.
Messages
81
Outbox
(Menu 1.2.3)
When you access this menu, the list of the
multimedia messages you sent or saved displays.
The icons on the left tell you the status of the
messages.
• : Messages currently being sent
• : Messages sent
• : Messages your phone couldn’t send
• : Messages to be sent
• : Messages deferred
1. Select a message on the list and press the
Select
soft key or key.
The message displays and scrolls to the next
page, if it has one, after a specified time.
2. Press the
OK
soft key to go to the message view
screen.
Or, the display automatically switches to the
screen after a few seconds.
3. To scroll through the message, press the Up or
Down key.
If the message has more than one page, you
can scroll through the pages by using the Left
and Right keys.
While viewing a message, you can choose the
following options by pressing the
Options
soft key:
Delete
: deletes the message.
Cut address
: allows you to extract the destination
numbers or e-mail addresses and URL, e-mail
addresses, or phone numbers from the message
text.
Send
: allows you to resend the message.
Messages
82
Edit message
: allows you to change the message
contents, sound, photo, or text.
Properties
: shows you information about the
message, such as the message status, subject,
sender and recipients’ addresses or phone
numbers, message size, transaction ID, MMS
version, and time and date when the message was
sent.
Draft
(Menu 1.2.4)
After creating a multimedia message, you can store
it in this message box for later sending.
For further details about viewing a message, see
“Outbox” on page 81.
Templates
(Menu 1.2.5)
This menu stores messages you saved as templates
so that you can use them to make new messages.
1. Scroll through the template list using the Up and
Down keys.
2. When the message template you want
highlights, press the
Select
soft key or key.
3. Press the
OK
soft key to use the following
options, or the display automatically shows the
options after a specified time:
•
Edit message
: allows you to send a message
using the template. For further details about
how to send a message, see page 74.
•
Delete
: allows you to delete the message. You
are asked to confirm the deletion by pressing
the
Yes
soft key.
4. Press the
key to return to Idle mode.
•
Send
: sends your message.
Messages
83
Push messages
(Menu 1.3)
In this menu, you can receive and access web
messages from the server.
The following options are available:
Inbox
: allows you to read the messages received
from the web server.
Receive
: allows you to set whether or not your
phone receives web messages. Select
Always
to
receive web messages or
Never
to reject web
messages.
Delete all
: allows you to delete all of the web
messages.
Delete all
(Menu 1.4)
This menu allows you to delete all of the messages
in each message box. You can also delete all of your
messages at one time.
1. Select a message type and press the
Select
soft
key. or key.
3. To delete the marked messages, press the
Delete
soft key.
4. When a confirmation message displays, press
the
Yes
soft key to confirm.
2.
To Press the
select a message
box to clear
Up or Down key. To delete all
of your messages, select
All
messages
.
place a check mark
Mark
soft key.
remove a check
mark
Unmark
soft key.
Messages
84
Voice mail
(Menu 1.5)
This menu allows you to access your voice mailbox,
if your network supports this service.
The following options are available:
Connect to voice server
: before using the Voice
Mail feature, you must enter the voice server
number obtained from your service provider. You
can then select this option and press the
OK
soft
key to listen to your messages.
You can quickly connect to the voice server by
pressing and holding the
1
key in Idle mode.
Voice server number
: allows you to change the
voice mail server number, if necessary.
Note:
Voice Mail is a network feature. Please
contact your service provider for further
details.
Memory status
(Menu 1.6)
You can check the amount of the memory being
used and the memory remaining for messages.
Text messages
: shows the number of messages
currently stored and the total number of messages
you can store in the SIM and Phone memories. If
necessary, press the Up or Down key to scroll
through the screen.
Multimedia messages
: shows the total space,
including the free and used space. When you press
the
Next
soft key, you can view how much space is
currently occupied by each message box.
E-mail messages
: shows the total space, including
the free and used space. When you press the
Next
soft key, you can view how much space is currently
occupied by each message box.
Messages
85
Settings
(Menu 1.7)
This menu allows you to configure various settings
for using the Message feature.
Text messages
(Menu 1.7.1)
In this menu, you can set up default SMS/EMS
information. A setting group is a collection of
settings required to send messages. The number of
setting groups available depends on the capacity of
your SIM card.
Note:
The last setting you accessed is
automatically activated for sending
messages.
Setting x
(where
x
is the setting group number):
each group has its own sub-menu.
Service centre: allows you to store or change the
number of your message center, which is required
when sending messages. You must obtain this
number from your service provider.
Default destination: allows you to store the default
destination number. The number automatically
displays on the Destination screen when you create
a message.
Setting name: allows you to give a name to the
setting group currently being defined.
Messages
86
Common setting
: The following options are
available:
Reply path: allows the recipient of your message to
send you a reply through your message center, if
your network supports this service.
Delivery reports: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether or not
your message has been delivered.
Bearer selection: allows you to choose either
GSM
or
GPRS
, depending on your network.
Character support: allows you to choose a character
type from
GSM-alphabet
,
Uni-code
, or
Automatic
.
If you select
Uni-code
and your recipient’s phone
does not support it, your recipient may not be able
to read your message.
Multimedia messages
(Menu 1.7.2)
You can change the default settings for sending or
receiving multimedia messages.
The following options are available:
Delivery report
: when this option is enabled, the
network informs you whether or not your message
has been delivered.
Read reply
: when this option is enabled, your
phone sends a request for a reply along with your
message to the recipient.
Messages
87
Auto download
: you can set whether or not your
phone retrieves new incoming messages from the
MMS server without notifications.
On: the phone automatically retrieves new
messages from the server. As soon as you receive a
message you can use more options while you are
reading. See page 70 for details about the options.
Off: you need to manually download new messages
by using the
Retrieve
option.
Message acceptance
: you can specify the
category of messages you want to receive.
Hide ID
: when this option is enabled, your phone
number does not display on the recipient’s phone.
Expiry date
: you can select the length of time your
messages are stored in the message center after
they are sent.
Delivery time
: you can set a delay time before the
phone sends your messages.
Priority
: you can select the priority level of your
messages.
Report allowed
: when this option is enabled, the
sender of an incoming message receives a delivery
report from the network.
Page duration
: you can set the length of time one
page of an outgoing message displays on the
message presentation screen. After a specified
time, the display automatically scrolls to the next
page.
Messages
88
MMS profile
(Menu 1.7.4)
In this menu, you can configure various network
settings that are required when you send or receive
multimedia messages.
Notes:
• The last profile you accessed is automatically
activated for sending messages.
• If you change the MMS settings without first
checking with your service provider, the MMS feature
may not work properly.
• The availability of the setting options may vary,
depending on your country.
The following options are available for each profile:
Profile name
: enter a name that you wish to
assign to the MMS server.
Connection URL
: enter the address of your MMS
server.
Security
: select a data transmission mode. Choose
Secure
to protect your data against unauthorized
access; otherwise, choose
Non-secure
.
Proxy setting
: enter the gateway address and port
number required to connect to the MMS server.
User name
: enter the user ID required to connect
to the MMS server.
Password
: enter the password required to connect
to the MMS server.
APN
: enter the access point name used for the
address of the MMS server.
For further details, contact your service provider.
89
Call records
In this menu, you can view the:
• calls you missed, received, or dialed.
• length of your calls.
Notes:
• You can access the numbers in the three types of call
records by pressing the key in Idle mode.
• The number of call records the phone can store may
be different, depending on your SIM card.
Missed calls
(Menu 2.1)
This menu lets you view the most recent 20
numbers of the calls you received, but did not
answer.
The number or name, if available, displays together
with the time and date when the call was received.
By pressing the
Options
soft key, you can:
• edit the number, if available, and dial it or save it
in Phone Book.
• delete the call from the list.
You can also dial the number by pressing the
key.
Call records
90
Received calls
(Menu 2.2)
This menu lets you view the most recent 20
numbers of the calls you received.
The number or name, if available, displays together
with the time and date when the call was received.
By pressing the
Options
soft key, you can:
• edit the number, if available, and dial it or save it
in Phone Book.
• delete the call from the list.
You can also dial the number by pressing the
key.
Dialled calls
(Menu 2.3)
This menu lets you view the most recent 20
numbers you dialed.
The number or name, if available, displays together
with the time and date when the call was made.
By pressing the
Options
soft key, you can:
• edit the number and dial it or save it in Phone
Book.
• delete the call from the list.
You can also dial the number by pressing the
key.
Call records
91
Delete all
(Menu 2.4)
This menu allows you to delete all of the records in
each call record. You can also delete all of your call
records at one time.
When a confirmation message displays, press the
Yes
soft key to confirm.
To Press the
select a call record to
clear
Up or Down key. To delete all
of your call records, select
All calls
.
place a check mark
Mark
soft key.
remove a check mark
Unmark
soft key.
delete the marked
records
Delete
soft key.
Call records
92
Call time
(Menu 2.5)
This menu lets you view the timers for calls you
made and received.
Note:
The actual time invoiced for calls by your
service provider may vary, depending on
network features, rounding-off for billing
purposes and so on.
The following options are available:
Last call time
: length of the last call.
Total sent
: total length of all calls you have made
since the timer was last reset.
Total received
: total length of all calls you have
received since the timer was last reset.
Life time
: the number and total duration of all calls
made to or from your phones since the phone was
shipped form the factory. This timer cannot be
reset.
Reset timers
: option used to reset the call timers.
You must first enter the phone password and then
press the
OK
soft key.
Note:
The password is preset to “00000000” at the
factory. To change this password, see
page 117.
Call records
93
Call cost
(Menu 2.6)
This netword feature lets you view the cost of calls.
This menu may not be available depending on your
SIM card.
The following options are available:
Last call cost
: cost of the last call you made.
Total cost
: total cost of all calls you made since
the cost counter was last reset. If the total cost
exceeds the maximum cost set in the
Set max cost
option, you can no longer make any calls until you
reset the counter.
Max cost
: maximum cost set in the
Set max cost
option. See below.
Reset counters
: option used toe reset the cost
counter. You must first enter your PIN2 (see page
152) and then press the
OK
soft key.
Set max cost
: option used to enter the maximun
cost that you authorise for your calls. You must first
enter you PIN2 (see page 152) and then press the
OK
soft key.
Price/Unit
: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls. You must first enter your PIN2
(see page 152) and then press the
OK
soft key.
94
Camera
Using the camera module embedded in your phone,
you can take photos of people or events while on
the move. Additionally, you can send photos to
other people in a multimedia message or set one as
a wallpaper for the idle screen or a caller ID image
for a Phone Book entry.
You can also record videos using your phone as a
camcorder.
CAUTION
:
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are not
allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Take and send
(Menu 3.1)
In this menu, you can take a photo. The camera
produces JPEG photos.
Note:
When you take a photo in direct sunlight or
in bright conditions, shadow may appear on
the photo.
1. Accessing the
Take
and send
menu turns on
the camera on the top center of the phone. Or
you can press and hold the Camera key( ) in
Idle mode.
The image to be captured appears on the
display.
Camera
95
2. Adjust the image by rotating the camera module
and aiming it at the subject.
• Use the Left or Right key to adjust the
brightness of the image.
• Use the Up or Down key to zoom in or out.
• Use the Volume keys on the left side of the
phone to flip the image vertically or
horizontally.
• To use the camera options, press the
Options
soft key. For details, see page 97.
3. Press the Camera key( ) or
Take
soft key to
take the photo.
4. Press the
Save
soft key.
To discard the photo and return to Capture
mode, press the
Preview
soft key.
5. Enter a name for the photo, if necessary, press
the
C
key to clear the default name.
For further details about entering characters,
see page 45.
6. Press the
OK
soft key to save the name.
Camera
96
When you press the
Options
soft key after saving a
photo, the following options are available:
Send
: allows you to send the photo using a
multimedia message or e-mail message. For
sending messages, see page 74 or page 83
respectively.
Set this photo
: allows you to set the image as
your wallpaper for the idle screen or a caller image
for a Phone Book entry.
Protection
: allows you to set the protection to
keep the photo from being deleted.
7.
To Press the
use the photo options
Options
soft key. For
further details, see
page 97.
return to Capture mode
Preview
soft key or
C
key.
return to Idle mode key.
Camera
97
Using the number keys in capture mode
You can use the number keys to customise your
camera settings when you are in Capture mode.
Using the camera options
In Capture mode, you can use various options by
pressing the
Options
soft key.
Key Function
1 switches to Record mode. See page 100.
2 changes the image size.
3 selects the image quality.
4 selects the camera mode.
5 changes the color tone or apply special
effects to the photo.
7 selects a decorated frame.
8 sets the timer.
9 switches to the
My photos
(
Menu 3.2
)
menu. See page 99.
To Press the
scroll to an option
Up or Down key.
select the highlighted
option
Select
soft key, Right key
or key.
return to Capture mode
soft key or
C
key.
Camera
98
The following options are available:
Effects
: allows you to change the color tone or
apply special effects to the photo.
Frames
: allows you to use a decorated frame.
Select a frame from the list. Press the
View
soft
key to check the selected frame and the
Select
soft
key to use it.
Multi shot
: allows you to take a series of action
stills. Select the capture speed to
High speed
or
Normal speed
and the number of photos for the
camera to take. When you press the Camera
key( ) or
Take
soft key, the camera takes photos
successively.
After taking photos, press the
Save
all
soft key to
save all of them or the
Select
soft key to select the
photo(s) and press the
Save
soft key.
Rotation
: allows you to rotate the photo. You can
flip the photo vertically, see its mirror image, or do
both at the same time.
Self timer
: allows you to have a delay time before
the camera takes the photo. Select the length of
time you want. When you press the Camera
key( ) or
Take
soft key, the camera takes the
photo after a specified time.
Photo size
: sets the image size to either
Mobile(176x160)
,
QQVGA(160x120)
, or
VGA(640x480)
. The selected image size displays
on the capture screen.
Photo quality
: allows you to select the image
quality from
Super fine
,
Fine
,
Normal
, and
Economy
. The selected quality displays on the
capture screen.
Camera
99
My photos
(Menu 3.2)
This menu allows you to review your photos.
When you access this menu, your phone displays
the photos in Thumbnail mode. Use the Navigation
keys to scroll through the photos.
To view the photo on the full screen, press the
View
soft key. To go back to Thumbnail mode,
press the
Multi
soft key.
Press the
Options
soft key to use the following
options:
Send
: allows you to send the photo as a
multimedia message or e-mail. For details about
sending a message, see page 74 or page 83
respectively.
Set this photo as
: allows you to set the image as
your wallpaper for the idle screen or a caller ID
image for a Phone Book entry.
Protection
: allows you to set the protection to
keep the photo from being deleted.
Delete this
: allows you to delete the photo.
Delete all
: allows you to delete all of the photos
saved in your phone. The protected photos are not
deleted.
Rename
: allows you to change the name of the
photo.
View properties
: shows the properties of the
photo, such as time and date it was saved, photo
size and quality, protection status, and file size.
Camera
100
Video recorder
(Menu 3.3)
You can record a video that is currently displayed on
the camera screen and save it as a MPEG file. You
can also view the sample file stored in your phone.
Record
(Menu 3.3.1)
You can record videos.
1. Choose quality for the video image and press
the
Select
soft key or key.
2. When the camera turns on, adjust the image by
rotating the camera module and aiming it at the
subject.
• Use the Up and Down keys to adjust the
brightness of the image.
• Use the Left key,
Small
or
Large
soft key to
adjust the display size.
• Use the Volume keys on the left side of the
phone to flip the image vertically or
horizontally.
3. Press the Camera key( ) or
Record
soft key
to start recording.
4. When you are finished, press the
Stop
soft key.
Or, the phone automatically stops when the
recording time expires.
5. Enter a name for the video, if necessary, press
the
C
key to clear the default name.
For further details about entering text, see
page 45.
6. Press the
OK
soft key.
The video is saved and the display returns to
Record mode.
Camera
101
Files
(Menu 3.3.2)
When you access this menu, the video file list
displays.
To play a video:
1. Select the video you want to view using the Up
and Down keys.
2. To play the video file, press the
Play
soft key.
When you want to use options, press the
Options
soft key. For further details about the
options, see below.
When you press the
Options
soft key, you can use
the following options:
Send by MMS
: allows you to send the photo as a
multimedia message. When you record a video
using
Low quality
, this option is available. For
further details, see page 74.
Main wallpaper
: allows you to set the video file as
your wallpaper for the idle screen.
Protection
: allows you to set the protection to
keep the video from being deleted.
Delete
: allows you to delete the current video file.
3.
To Press the
search backward through a
file
Left key.
search forward through a file Right key.
pause or play Up key.
stop Down key.
adjust the volume Volume keys.
Camera
102
Delete all
: allows you to delete all of your video
files stored in the phone. The protected videos are
not deleted.
Rename
: allows you to change the file name.
View properties
: allows you to view information of
the video, such as the file name, time and date the
video was saved, video size, image quality,
protection status, and file size.
Resize video
: allows you to change the image
quality and size of the video.
Sample video
(Menu 3.3.3)
This menu allows you to view the default video file.
For further details, see page 101.
Memory status
(Menu 3.4)
You can check the amount of memory being used
and the remaining memory in the camera.
The display shows the total, used, and free space
for photos and videos.
103
Sound settings
You can use the Sound Settings feature to
customize various settings, such as the:
• ring melody, volume, and type.
• sounds made when you press a key, receive a
message, open/close the phone, or switch on/off
your phone.
• alert tone made every minute during a call, when
you make an error or when your call is connected
to the system.
Note:
When the phone is in Silent mode (see
page 29), you cannot change the sound
settings.
Ring tone
(Menu 4.1)
This menu allows you to select a ring melody.
You can choose between many different melodies. If
you have downloaded sounds from the Internet or
the optional EasyGPRS programme, you can use
them in this menu.
Ring volume
(Menu 4.2)
This menu allows you to adjust the ring volume to
one of five levels.
Use the Up and Down keys or the Volume keys on
the left side of the phone to increase or decrease
the volume.
Sound settings
104
Alert type
(Menu 4.3)
This menu allows you to specify how you are to be
informed of incoming calls or the alarm settings.
The following options are available:
Light only
: the service light flashes; the phone
neither rings nor vibrates.
Melody
: the phone rings using the selected ring
tone or melody in the
Ring tone
menu
(
Menu 4.1
); see page 103.
Vibration
: the phone vibrates but does not ring.
Vibration+melody
: the phone first vibrates three
times and then starts ringing.
Keypad tone
(Menu 4.4)
This menu allows you to select the tone that the
phone sounds when you press a key.
To turn off the sound, select
Off
.
Sound settings
105
Message tone
(Menu 4.5)
This menu allows you to select how the phone
informs you that a new message has been received.
SMS tone
(Menu 4.5.1)
The following options are available for alerting you
to new SMS messages:
Off
: the phone does not use an SMS tone.
Light only
: the service light flashes.
Vibration
: the phone vibrates.
Single beep
: the phone beeps once.
SMS tone x
: the phone uses one of several SMS
tones.
SMS-CB tone
(Menu 4.5.2)
The following options are available for alerting you
to new cell broadcast (CB) messages:
Off
: the phone does not use a CB tone.
Light only
: the service light flashes.
Vibration
: the phone vibrates.
Single beep
: the phone beeps once.
MMS tone x
: the phone uses one of several CB
tones.
Sound settings
106
MMS tone
(Menu 4.5.3)
The following options are available for alerting you
to new MMS messages:
Off
: the phone does not use an MMS tone.
Light only
: the service light flashes.
Vibration
: the phone vibrates.
Single beep
: the phone beeps once.
MMS tone x
: the phone uses one of several MMS
tones.
Folder tone
(Menu 4.6)
This menu allows you to select the tone that the
phone sounds when you open or close the phone.
To turn off the sound, select
Off
.
Power on/off
(Menu 4.7)
This menu allows you to select the melody that the
phone sounds when it is switched on and off.
To turn off the sound, select
Off
.
Sound settings
107
Extra tones
(Menu 4.8)
You can customize additional tones used for the
phone.
The following options are available:
Error tone
: sets whether or not the phone informs
you when you make a mistake.
Minute minder
: sets whether or not the phone
beeps every minute during an outgoing call to keep
you informed of the length of your call.
Connect tone
: sets whether or not the phone
beeps when your call is connected to the system.
Alerts on call
This menu allows you to set whether or not the
phone informs you when you receive a new
message or when the alarm time expires during a
call.
Off
: the phone alerts you after ending a call.
On
: the phone alerts you during a call.
To turn a given tone Press the
on
On
soft key or key. A
check mark displays in front
of the option.
off
Off
soft key or key. The
check mark no longer
displays.
108
Phone settings
Many different features of your phone can be
customized to suit your preferences. All of these
features are accessed in the
Phone settings
menu.
Infrared activate
(Menu 5.1)
This feature allows you to send or receive data to or
from IrDA-compatible computers or phones through
the infrared port.
With PC
(Menu 5.1.1)
To use an infrared connection, you must:
• configure and activate an IrDA-compliant infrared
port on your PC.
• activate the infrared feature on the phone; the
IrDA icon ( ) appears on the top line of the
display.
• align the IrDA port on the phone with the IrDA
port on your computer or another phone.
IrDA port
IrDA port
Phone settings
109
The connection is ready for data transmission.
If there is no communication between your phone
and the IrDA-compliant device within 30 seconds of
activating the feature, it is automatically
deactivated.
Note:
For optimal performance, use an optional
data link cable. You can purchase one from
your local Samsung dealer.
With other phone
(Menu 5.1.2)
Using the infrared connection, you can send or
receive Phone Book entries and calendar memos
from another compliant phone.
Note:
If you receive a call while sending or
receiving data, you can either answer or
reject the call without interrupting the IrDA
connection. But, picking up your phone may
break the connection between the phones, so
use the headset to answer the call.
Receiving data from another phone
1. Align the IrDA ports on both phones with each
other.
2. Activate the infrared feature on the phones. For
this phone, access the
Infrared activate
menu
(
Menu 5.1
) and select
With other phone
.
The connection between the phones is
established and your phone receives data from
the other phone. You can receive up to 20 items
in succession.
Phone settings
110
3. When the list of the received data displays, you
have two options:
To save an individual item:
➀
Select one on the list and press the
Select
soft key.
The display shows the Phone Book entry.
➁
Press the
OK
soft key.
➂
Press the
Options
soft key.
The following options are available:
•
Discard
: deletes the data.
•
Save
: allows you to save the selected data
in your phone’s memory.
④
Select
Save
and press the
Select
soft key.
To save all of the data:
➀
Press the
Options
soft key.
• The following options are available:
•
Save all
: allows you to save all data.
•
Save all vCard
: saves all the Phone Book
entries from the received data.
•
Save all vCalendar
: saves all the calendar
memos from the received data.
•
Discard all
: deletes all of the data.
•
Discard all vCard
: deletes all the Phone Book
entries from the received data.
•
Discard all vCalendar
: deletes all the
calendar memos from the received data.
•
Exit
: exits the IrDA function. When the phone
asks if you want to delete the remaining data,
press the
Yes
or
No
soft key.
➁
Select a save option and press the
Select
soft
key.
Phone settings
111
4. When FDN (Fixed Dial Number) mode is enabled
on your phone, enter the PIN2 and press the
OK
soft key.
For further details about FDN mode, see
page 118.
5. Press the
Save
soft key.
The entries are saved.
Sending your phone book
1. Align the IrDA ports on both phones with each
other to establish the IrDA connection.
The IrDA port of the other phone must be
activated.
2. Access a Phone Book entry and press the
Options
soft key. See page 37.
3. Press the Up or Down key to scroll to
Send via
IrDA
and press the
Select
soft key.
4. Highlight an option,
Selected data
or
All data
,
using the Up or Down key and press the
Select
soft key.
Your phone begins sending the data.
Sending a calendar memo
1. Align the IrDA ports on both phones with each
other to establish the IrDA connection.
The IrDA port of the other phone must be
activated.
2. Access the
Calendar
menu (
Menu 6.2
) and
select the memo you want to send. See
page 125.
3. Press the
Options
soft key and select
Send via
IrDA
.
Your phone begins sending the memo.
Phone settings
112
Display settings
(Menu 5.2)
In this menu, you can change various settings for
the display or backlight.
Wallpaper
(Menu 5.2.1)
This menu allows you to change the background
image or the color of the text to be displayed in Idle
mode.
The following options are available:
Wallpaper list
: you can select a background image
to be displayed on the idle screen.
To change the background image:
1. Scroll through the list by pressing the Up or
Down key.
You have various preset images available. You
can also select a blank background or any
images downloaded from the Internet and the
optional EasyGPRS programme or received in
messages. Once you have set a photo or video
as the wallpaper, it is designated as
My_photo
or
My_video
on the list.
2. Press the
Select
soft key or key when the
image you want highlights.
3. When the image displays, press the
Select
soft
key to display it on the idle screen.
Text display
: you can specify whether or not the
phone displays the time and date.
Text color
: you can select the color of the text to
be displayed on the idle screen.
Phone settings
113
Menu style
(Menu 5.2.2)
This menu allows you to select the menu display
style. You can choose either
Grid style
,
Bar style
,
or
Page
style
.
Back light
(Menu 5.2.3)
You can select the length of time the backlight is on.
The backlight turns on when you press a key, open
the phone or receive a call or message and remains
on for the specified length of time.
Service light
(Menu 5.2.4)
This menu allows you to select whether or not the
service light is used. It also allows you to select a
clock in which it flashes.
Select one of the seven color settings. When the
phone is ready for use, the service light flashes in
the chosen color.
If you do not wish to use the service light,
select
Off
.
Graphic logo
(Menu 5.2.5)
This menu allows you to display your service
provider’s logo instead of its name.
Off
: the service provider’s name displays in Idle
mode.
On
: the service provider’s logo stored in your phone
displays in Idle mode; if no logo has been stored,
the service provider’s name displays.
Phone settings
114
Front LCD display
(Menu 5.2.6)
This menu allows you to adapt the external display
to your preferences.
Display type
: allows you to change the type of the
external display.
No display: the display shows only the current time
on a digital clock.
Date display: the display shows the current time
and date.
Analog clock: the display shows the current time
both on digital and analogue clocks.
Light timer
: allows you to select the length of time
the external display shows the date or analogue
clock.
Greeting message
(Menu 5.3)
This menu allows you to set a greeting to be
displayed briefly when the phone is switched on.
For further details about how to enter characters,
see page 45.
Own number
(Menu 5.4)
This function is a memory aid, which you can use to
check your own phone numbers if you need to do
so.
You can:
• assign a name to each of your own phone
numbers registered on your SIM card.
• edit the names and numbers.
Any changes made here do not in any way affect
the actual subscriber numbers on your SIM card.
Phone settings
115
Language
(Menu 5.5)
You can select a display language. When the
language option is set to
Automatic
, the language
is automatically selected according to the language
of the SIM card used.
Note:
Depending on your country, or software
version of the phone, the
Automatic
option
may not display.
Security
(Menu 5.6)
The Security feature enables you to restrict the use
of your phone by others and the types of calls.
Various codes and passwords are used to protect
features of your phone. They are described in the
following sections. Also see pages 159-161.
PIN check
(Menu 5.6.1)
When the PIN Check feature is enabled, you must
enter your PIN each time you switch on the phone.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
Note:
Before disabling the PIN Check feature, you
must enter your PIN.
The following options are available:
Disable
: the phone connects directly to the
network when you switch it on.
Enable
: you must enter the PIN each time the
phone is switched on.
Phone settings
116
Change PIN
(Menu 5.6.2)
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature
is enabled. You must enter the current PIN before
you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone lock
(Menu 5.6.3)
When the Phone Lock feature is enabled, the phone
is locked and you must enter a 4 to 8-digit phone
password each time the phone is switched on.
The password is preset to “00000000” at the
factory. To change the phone password, see the
Change password
menu (
Menu 5.6.4
).
Once the correct password has been entered, you
can use the phone until you switch it off.
The following options are available:
Disable
: you are not asked to enter the phone
password when you switch on the phone.
Enable
: you are required to enter the phone
password when you switch on the phone.
Phone settings
117
Change password
(Menu 5.6.4)
The Change Password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
The password is preset to “00000000” at the
factory. Once you have entered a new password,
you are asked to confirm it by entering it again.
Privacy
(Menu 5.6.5)
Using this menu, you can lock your media contents,
such as multimedia messages, e-mail messages,
photos, videos, voice memos, images, sounds, and
PIM sync feature. Once you have locked the
contents, you must enter the phone password to
access the associated menus.
When the phone asks for the phone password,
enter the password and press the
OK
soft key.
Note:
The password is preset to “00000000” at the
factory. To change this password, see
page 117.
To Press the
select an item to lock Up or Down key. To lock all
of the contents, select
All
.
place a check mark
Mark
soft key.
remove a check mark
Unmark
soft key.
lock the marked items
OK
soft key.
Phone settings
118
SIM lock
(Menu 5.6.6)
When the SIM Lock feature is enabled, your phone
only works with the current SIM. You must enter
the SIM lock code to use a different SIM card.
Once you have entered the lock code, you are
asked to confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock
code.
FDN mode
(Menu 5.6.7)
FDN (Fixed Dial Number) mode allows you to
restrict your outgoing calls to a limited set of phone
numbers.
The following options are available:
Disable
: you can call any number.
Enable
: you can only call phone numbers stored in
Phone Book. You must enter your PIN2.
Change PIN2
(Menu 5.6.8)
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
Phone settings
119
Extra settings
(Menu 5.7)
You can turn on or off the automatic redialing or
answering features.
The following options are available:
Auto redial
: when this option is checked, the
phone makes up to ten attempts to redial a phone
number after an unsuccessful call.
Note:
The interval between two attempts varies.
Active folder
: when this option is checked, you
can simply open the phone to answer a call.
When it is unchecked, you must press a key to
answer a call, depending on the setting of the
Anykey answer
option. See below.
Anykey answer
: when this option is checked, you
can answer an incoming call by pressing any key,
except the key and the
Reject
soft key. To
reject the call, press the key or the
Reject
soft key.
When this option is unchecked, you can only press
the key or
Accept
soft key.
To turn a feature Press the
on
On
soft key or key.
A check mark displays in front of
the option.
off
Off
soft key or key.
The check mark no longer
displays.
Phone settings
120
Short cut
(Menu 5.8)
The Navigation keys can be used as shortcut keys.
In Idle mode, they allow you to access specific
menus directly.
To assign a shortcut to a key:
1. Select the key to be used as a shortcut key by
pressing the Up or Down key, and press the
Select
soft key or key.
2. Select the menu to be assigned to the key by
pressing the Up or Down key.
Note:
To deactivate a shortcut key, select the
None
option.
3. Press the
Select
soft key or key to save the
selection.
Reset settings
(Menu 5.10)
You can easily reset your phone to its default
settings.
To reset your phone, enter the 4 to 8-digit phone
password and press the
OK
soft key.
Note:
The password is preset to “00000000.” To
change this password, see page 117.
121
Organizer
The Organizer feature enables you to:
• set an alarm so that the phone rings at a specific
time, such as to remind you of an appointment.
• view the calendar and organise your schedule.
• set the current time and date.
• use the phone as a calculator for basic
mathematical equations or currency exchange
operations.
• define a list of things to do.
• record voice memos.
•set a PIM sync
Alarm
(Menu 6.1)
This feature allows you to:
• set the alarm to ring at a specific time.
• set the phone to switch on automatically and ring
the alarm even if the phone is switched off.
The following options are available:
Once alarm
: the alarm rings only once and is then
deactivated.
Daily alarm
: the alarm rings every day at the
same time.
Morning call
: the alarm rings to wake you up in
the morning.
Organizer
122
To set an alarm:
1. Choose the type of alarm to be set and press the
Select
soft key or key.
2. Enter the time for the alarm to sound.
Note:
Your phone is preset to use 24-hour
format. To change the format, see
page 127.
If you want to use the alarm options, press the
Options
soft key. The following options are
available:
•
Remove alarm
: deactivates the current
alarm.
•
Alarm tone
: allows you to select the alarm
melody.
3. Press the
OK
soft key.
4. If you select
Morning call
in step 1, choose the
repeat option,
Monday to friday
or
Monday to
saturday
, and press the
Select
soft key or
key.
To stop the alarm when it rings, press the
Exit
soft
key,
C
key, Camera key, or key.
Remove alarm
: deactivates all alarm settings.
Autopower
: when this option is set to
Enable
, the
alarm rings at the specified time, even if the phone
is switched off.
If the option is set to
Disable
and the phone is
switched off at the specified time, the alarm does
not ring.
Organizer
123
Calendar
(Menu 6.2)
With the Calendar feature, you can:
• consult the calendar to check your memos.
• write memos to keep track of your schedule.
• set an alarm to act as a reminder, if necessary.
Consulting the calendar
When you select the
Calendar
menu (
Menu 6.2
),
the calendar displays with today’s date highlighted.
The following options are available when you press
the
Options
soft key:
Search all
: displays all of the memos, starting with
the oldest regardless of the day. To scroll through
the memos, press the Up or Down key.
Delete all
: allows you to delete all of the memos.
You are asked to confirm your action.
Go to date
: allows you to go to a specific date.
Exit
: exits the Calendar feature and returns to Idle
mode.
Organizer
124
Writing a memo
You can make up to 30 memos for one day.
To write or edit a memo on a specific date:
1. Select a date on the calendar, using the
Navigation keys.
Note:
To skip to the previous or next month,
press the Volume keys.
2. Press the
Select
soft key.
An empty memo screen displays allowing you to
enter your memo.
3. Enter your memo and then press the
OK
soft
key.
Note:
For further details about how to enter
characters, see page 45.
You are asked if you wish to set an alarm.
4. If you want an alarm to ring on the chosen day,
press the
Yes
soft key.
Otherwise, press the
No
soft key. The memo is
saved.
5. If you pressed the
Yes
soft key, enter the time
for the alarm and press the
OK
soft key.
Note:
Your phone is preset to use 24-hour
format. To change the format, see
page 127.
You can also select the melody for the alarm by
pressing the
Melody
soft key.
The color of the date on the calendar changes to
green to indicate that a memo exists for that date.
Organizer
125
Viewing a memo
When you select a day for which a memo already
exists on the calendar, the latest memo for the day
displays.
If more than one memo is stored, press the Up or
Down key to scroll to the previous or next memo.
Press the
New
soft key to add a new memo for the
day.
You can use the following options by pressing the
Options
soft key:
Edit
: allows you to change the memo text.
Alarm
: allows you to set an alarm to ring at a
specified time to remind you of the memo. If you
set the alarm earlier, you can change or delete it.
Delete
: allows you to delete the memo.
Copy to
: allows you to copy the memo to another
date.
Move to
: allows you to change the date of the
memo.
Send via IrDA
: allows you to send the memo to
another phone via the IrDA port. For further details,
see page 111.
Organizer
126
Time & Date
(Menu 6.3)
This menu allows you to change the current time
and date displayed. You can also find out what time
it is in another part of the world.
The following options are available:
Set time
: allows you to enter the current time. You
can choose the time format in the
Time format
menu (
Menu 6.3.4
).
Note:
Before setting the time, you must specify
your time zone, in the
World time
menu
(
Menu 6.3.3
).
Set date
: allows you to enter the day, month, and
year.
World time
: allows you to find out what time it is
in another part of the world, using the Left and
Right keys.
The screen shows the:
•city name.
• current time and date.
• time difference between the selected city and
your city if you have set the local time (see the
following page for further details).
• city selected as your time zone.
Organizer
127
To select your time zone:
1. Select the city corresponding to your time zone
by pressing the Left or Right key once or
repeatedly.
The local time and date display.
2. Press the
Set
soft key.
Time format
: allows you to change the time
format to
24 hours
or
12 hours
.
Set time from network
: allows you to receive
time information from your service provider’s
network.
Manual: you need to manually set the time and
date according to the current time zone using the
Set time
menu (
Menu 6.3.1
).
Auto: the phone automatically updates the time and
date according to the current time zone using the
network service.
Confirm first: the phone asks for a confirmation
before the update.
Note:
Automatic updates of time and date does not
change the time you have set for alarm
settings or calendar memos.
Organizer
128
Calculator
(Menu 6.4)
With this feature, you can use the phone as a
calculator. The calculator provides basic arithmetic
functions; addition, subtraction, multiplication, and
division.
1. Enter the first number using the numeric keys.
Notes
:
• To delete mistakes or clear the display, press
the
C
key.
• To include a decimal point or a bracket, press
the left soft key until the symbol you want
displays.
2. Press the right soft key until the arithmetic
symbol you want appears:
+
(addition),
-
(subtraction),
(multiplication),
/
(division).
3. Enter the second number.
4. To view the result, press the key.
5. Repeat steps 1 to 4 as many times as required.
Organizer
129
To do list
(Menu 6.5)
This feature allows you to:
• enter a list of tasks to be done.
• assign a priority and a deadline to each task.
• sort the tasks by priority and status mark.
Creating the to do list
1. Press the
New
soft key.
2. Enter the first task.
Note:
For further details about how to enter
characters, see page 45.
3. Press the
OK
soft key.
4. Select a priority status of high, normal or low
using the Up and Down keys and press the
Select
soft key or key.
5. Enter your deadline and press the
OK
soft key.
If you do not want to set a deadline, press the
Skip
soft key.
Editing the to do list
When you select the
To do list
menu (
Menu 6.5
),
the current contents display with the status mark. If
the task has been done, and priority; for High,
for Normal, and for Low.
Organizer
130
Action Procedure
View the details
for a specific task
➀
Highlight the task.
➁
Press the
Select
soft key.
➂
Scroll through the tasks using
the Up and Down keys, if
necessary.
Change the status
of a specific task
➀
Highlight the task.
➁
Press the key to mark the
task as completed as of the
current time and date.
or
➀
Highlight the task.
➁
Press the
Options
soft key.
➂
Select the
Mark
option.
➃
Select the appropriate status
(
Done
or
Undo
).
Create a new task
➀
Press the
Options
soft key.
➁
Select the
New
option.
➂
Enter the text, priority, and/or
deadline for the task.
Organizer
131
Edit an existing
task
➀
Highlight the task.
➁
Press the
Options
soft key.
➂
Select the
Edit
option.
➃
Change the text, priority, and/
or deadline for the task.
Sort the existing
tasks by priority
or status
➀
Press the
Options
soft key.
➁
Select the
Sort
option.
➂
Select the sort criterion (
High
,
Low
,
Done
, or
Undo
).
Copy a task
➀
Highlight the task.
➁
Press the
Options
soft key.
➂
Select the
Copy
option.
➃
Change the text, priority, and/
or deadline for the task.
Copy a task to the
calendar
➀
Highlight the task.
➁
Press the
Options
soft key.
➂
Select the
Copy to
calendar
option.
➃
Change the text and deadline
for the task and set the alarm.
Delete a task
➀
Highlight the task.
➁
Press the
Options
soft key.
➂
Select the
Delete
option.
Delete all tasks
➀
Press the
Options
soft key.
➁
Select the
Delete all
option.
➂
Confirm the deletion by
pressing the
OK
soft key.
Exit the To do list
➀
Press the
Options
soft key.
➁
Select the
Exit
option.
Action Procedure
Organizer
132
Voice memo
(Menu 6.6)
You can record voice memos. After recording, you
can send a memo to other people using the
Multimedia Message Service.
Record
(Menu 6.6.1)
This menu allows you to record a new memo. When
you select this option, the display shows the 30-
second timer.
1. To start recording, press the
Record
soft key.
2. Record a memo by speaking into the
microphone.
3. When you press the
Stop
soft key, or if the
recording time expires, the following options
display:
•
Replay
: plays back your memo.
•
Re-record
: discards the memo and enables
you to record another one.
•
Save
: allows you to save the memo.
•
Quit
: cancels your recording and exits the
Record
menu.
4. To save the memo, choose
Save
and press the
Select
soft key or key.
5. Press the
C
key to clear the default name, if
necessary, and enter a name for the memo.
For further details about how to enter
characters, see
page 45
.
6. Press the
OK
soft key.
The memo is saved and then the display shows
the memo information.
Organizer
133
7. Press the
Options
soft key to use the following
memo options:
•
Send
: allows you to send the memo to other
people by using the MMS feature. Follow the
procedure on page 74.
•
Rename
: allows you to change the memo’s
name.
•
Delete
: allows you to delete the memo.
8. To exit, press the
C
or key.
Memo list
(Menu 6.6.2)
This menu shows your voice memo list. Scroll to a
memo and press the
Options
soft key or
key.
The following options are available:
Play
: plays the memo.
Send
: allows you to send the memo to other people
by using the MMS feature. See page 74 for further
details about sending a message.
Rename
: allows you to change the memo’s name.
Information
: displays information about the
memo, such as the name, date when the memo
was made, recording duration, and memory size.
Delete
: allows you to delete the memo.
Organizer
134
Delete all
(Menu 6.6.3)
In this menu, you can delete your voice memos.
When the confirmation message appears, press the
Yes
soft key. To cancel the deletion, press the
No
soft key.
Memory status
(Menu 6.6.4)
You can check the amount of memory for voice
memos.
The display shows you the total, free, and used
memory, including the number of memos you
recorded and the total number of memos you can
record.
Currency exchange
(Menu 6.7)
Using this menu, you can figure out currency
conversions.
1. Enter the current exchange rate of your source
currency and press the
OK
soft key.
You can insert a decimal point by pressing
the key
.
2. Enter the amount to convert and press the
OK
soft key.
The amount you entered and its equivalent
value display.
3. Press the
Exit
soft key to exit the currency
convertor.
Organizer
135
PIM sync
(Menu 6.8)
This menu allows you to synchronize personal
information stored in the
Phone Book
,
Calendar
,
or
To do list
menu on your phone with data stored
in the service provider’s network, by using the data
cable or an IrDA connection.
Start sync
(Menu 6.8.1)
This menu allows you to start synchronizing data
between your phone and data stored in your service
provider’s network.
View result
(Menu 6.8.2)
This menu shows the last synchronization and its
result for each folder; Phone book, Calendar, To do
list.
Sync settings
(Menu 6.8.3)
This menu allows you to customise various settings.
The following options are available:
Sync category
: allows you to select the category
you want to synchronize. Select
All
to synchronize
all items in each category.
Sync DB
: allows you to enter the name of each
category according to the setting of the server.
Sync mode
: allows you to select the
synchronization type, either
Recovery mode
or
Normal mode
.
Sync protocol
: allows you to select the protocol
type;
HTTP
or
DBEX
.
126
Network services
These menu functions are network services. Please
contact your service provider to check their
availability and subscribe to them, if you wish.
Call diverting
(Menu 7.1)
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to forward your business
calls to a colleague while you are on
holiday.
To set your call forwarding options:
1. Select
Forward always
by pressing the Up or
Down key, and then press the
Select
soft key or
key.
2. Select the type of calls, voice or data, by
pressing the Up or Down key, and then press the
Select
soft key.
The current status displays. If the option has
already been set, the number to which the calls
are forwarded displays.
3.
To Press the
activate call
forwarding
Activate
soft key.
Go to step 4.
change the
number to be
called
Change
soft key.
Go to step 4.
deactivate call
forwarding
Remove
soft key.
Network services
127
4. Enter the number to which the calls are to be
forwarded and press the
OK
soft key.
To enter an international code, press the
0
key
until the
+
sign displays.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can deactivate all call forwarding settings by
selecting the
Cancel all
option.
Call Barring
(Menu 7.2)
The call barring network service allows you to
restrict your calls.
You can use the following options to restrict voice
calls, fax calls and/or data calls:
All
Outgoing
: calls cannot be made.
International
: international calls cannot be made.
International
Except
to
Home
: when abroad,
calls can be made only to numbers within the
current country and to your home country, which is
the country where your home network provider is
located.
All
Incoming
: calls cannot be received.
Incoming
While
Abroad
: calls cannot be received
when you are using your phone outside of your
home service area.
Cancel
All
: all call barring settings are deactivated;
calls can be made and received normally.
Network services
128
To set your call barring options:
1. Select a call barring option by pressing the Up or
Down key, and then press the
Select
soft key.
2. Select the type of calls, voice or data, by
pressing the Up or Down key, and then press the
Select
soft key.
3. Press the
Activate
soft key to confirm your
settings.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement displays.
To deactivate specific call barring settings:
1. Select the call barring option to be deactivated.
2. Select the type of calls to which this option
applies.
3. Press the
Deactivate
soft key.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can also deactivate all call barring settings by
selecting the
Cancel
All
option.
Change
Barring
Password
: you can set and
change the call barring password obtained from
your service provider using this option. You must
enter the current password before you can specify a
new one.
Once you have entered a new password, you are
asked to confirm it by entering it again.
Network services
129
Call waiting
(Menu 7.3)
This network service informs you when someone is
trying to reach you during another call.
You can specify individual call waiting options for
voice calls and/or data calls.
To set your call waiting options:
1. Select the type of calls, voice or data, to which
you want to apply the call waiting option by
pressing the Up or Down key, and then press the
Select
soft key.
The screen informs you whether call waiting is
activated or deactivated.
2. You can activate or deactivate the call waiting
feature as necessary by using the
Activate
or
Deactivate
soft key respectively.
To return to the previous screen, press the
Exit
soft key.
You can also deactivate all call waiting settings by
selecting the
Cancel all
option.
Network services
130
Network selection
(Menu 7.4)
The Network Selection feature enables you to
automatically or manually select the network used
when roaming outside of your home area.
Note:
You can select a network other than your
home network only if there is a valid roaming
agreement between them.
To automatically or manually select the network
when roaming:
1. Press the Up or Down key until the appropriate
option highlights and then press the
OK
soft key
or key.
If you select
Automatic
, you are connected to
the first available network when roaming.
If you select
Manual
, the phone scans for the
available networks. Go to step 3.
2. When a confirmation message displays, press
the
Yes
soft key.
To cancel the selection, press the
No
soft key.
3. Press the Up or Down key until the network you
want highlights and then press the
OK
soft key.
You are connected to that network.
Network services
131
Caller ID
(Menu 7.5)
You can prevent your phone number from being
displayed on the phone of the person being called.
Note:
Some networks do not allow the user to
change this setting.
The following options are available:
Default
: the default setting provided by the
network is used.
Hide number
: your number does not display on
the other person’s phone.
Send number
: your number is sent each time you
make a call.
Closed User Group (CUG)
(Menu 7.6)
This network service allows incoming and outgoing
calls to be restricted to a selected user group. You
can create up to ten user groups.
For details about how to create and use a closed
user group, contact your service provider.
Example: A company lends SIM cards to its
employees and wants to restrict outgoing
calls to members of the same team.
Activating a Closed User Group
If you select the
Closed
User
Group
menu, you
can enter the CUG function. You can now access the
following options after pressing the
Select
soft key:
Network services
132
Index
List
: lets you list, add or delete CUG index
numbers. The list of current CUG indexes appears.
Add a new CUG index as advised by your service
provider or delete a group.
Outside
Access
: lets you enable or disable calls to
numbers other than those in the Closed User Group.
This feature depends on the nature of your CUG
subscription. Please check with your service
provider.
Default
Group
: you may set a default CUG with
your service provider. If you have done so, you can
enable the
Default
Group
option on your phone.
When making a call, you are given the option of
using your default CUG, instead of selecting one
from the list.
Deactivate
: deactivates the CUG function. This
menu appears only when the default group is
enabled or a CUG index is selected.
To Press the
scroll through the
existing CUG
indexes
Up or Down key.
add a new CUG
index
Options
soft key, select the
Add
option and enter the
index.
delete a CUG
index
Options
soft key and select
the
Delete
option.
activate a CUG
index
Options
soft key and select
the
Activate
option.
Network services
133
Band selection
(Menu 7.7)
For the phone to make and receive phone calls, it
must register with one of the available networks.
Your phone can handle any of the following types of
networks:
• GSM 900/1800
• Combined GSM 1900
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you must remember to change to an
appropriate band.
1. Press the Up or Down key until the appropriate
option and press the
OK
soft key or key.
2. When the display confirms the network band
you selected, press the
Yes
soft key.
To cancel the selection, press the
No
soft key.
When you select a new band, your phone displays a
confirmation message and then automatically
searches for all of the available networks. Your
phone registers with a preferred network within the
band.
134
Funbox
The
Funbox
menu contains several fun options.
WAP browser
(Menu 8.1)
Your phone is equipped with a WAP (Wireless
Application Protocol) browser to allow you to access
and navigate the Wireless Web using your phone.
Home
(Menu 8.1.1)
Selecting this menu connects the phone to the
network and loads the homepage of the Wireless
Web service provider. You can also press the key
in Idle mode.
The contents of the WAP Browser startup homepage
depends on your Wireless Web service provider. To
scroll through the screen, use the Up and Down
keys.
Note:
To access the startup homepage from any
other screen in the WAP browser, use the
Home
option. For further details about the
WAP Browser menus, see page 136.
Exiting the WAP browser
To exit the browser at any time, simply press the
key.
Funbox
135
Navigating the WAP browse
r
Entering text in the WAP browser
When you are prompted to enter text, the current
text input mode is indicated on the screen. To
change the text input mode, press the key or
more times.
The following modes are available:
Upper-case character mode
(
A
): allows you to
enter upper-case English characters.
Lower-case character mode
(
a
): allows you to
enter lower-case English characters.
Note:
You can also enter special characters in
Upper-case or Lower-case Character mode.
For details about available characters, see
page 49.
To Press the
scroll through and
select browser
items
Up or Down key until the
symbol points to the item,
and then press the
Select
soft
key to confirm the selection.
select a numbered
item
corresponding numeric key.
return to the
previous page
Back
soft key or the
C
key.
return to the
startup homepage
key for more than two
seconds and select the
Home
option. For further details about
this option, see page 136.
Funbox
136
T9 mode
(
T9
): allows you to enter English
characters by pressing one key per letter. In this
mode,
you can use only the
0
key to display
alternative words.
To change the case, press the
key.
Number mode
(
1
): allows you to enter numbers.
Selecting and using browser menu options
Various menu options are available when you are
using the WAP Browser to navigate the Wireless
Web.
To access a menu option:
1. Press and hold the key.
A menu list displays.
2. Highlight a menu by pressing the Up or Down
key.
3. Select an option by pressing the
Select
soft key.
4. If necessary, select a secondary option using the
Up and Down keys, and press the
Select
soft
key to confirm.
Note:
The menus may vary, depending on your
version of the WAP browser.
The following options are available:
Reload
: reloads the current page.
Home
: takes you back at any time to the home
page of the Wireless Web service provider.
Go to URL
: allows you to manually enter the URL
address of a Web page. After entering an address,
press the
OK
soft key to go there directly.
Funbox
137
Show URL
: displays the URL address of the Web
page to which you are currently connected. It also
enables you to set the current site as the startup
home page.
Edit home
: allows you to change the startup home
page manually. Enter the URL and press the
OK
soft
key. For further details about entering text, see
page 135.
Clear cache
: deletes the information stored in the
cache, which stores the most recently accessed
Web pages.
Inbox
: allows you to read messages received from
the web server.
Bookmarks
(Menu 8.1.2)
This menu allows you to store the URL addresses of
up to ten of your favorite web sites. You can access
this menu directly by pressing and holding the
key while using the WAP browser.
To Press the
set the current page as
your startup home page
Option
soft key and select
the
Save to home
option.
set a bookmark for the
current page
Option
soft key and select
the
Save to bookmark
option.
cancel your setting
Back
soft key.
Funbox
138
To store a URL address:
1. Select an empty location and press the
Options
soft key or
key
.
5. Enter the address and press the
Enter
soft key.
For further details about how to enter
characters, see page 45.
6. Enter a name for the favorite item and press the
Enter
soft key.
After saving favorite items, you can use the
following options by pressing the
Options
soft key
or
key
:
Go to URL
: takes you to the site.
Edit
: allows you to edit the address and name.
Delete
: allows you to delete the address.
http://
(Menu 8.1.3)
This menu allows you to manually enter the URL
address of the Web site that you wish to access.
For further details about how to enter characters,
see page 45.
Settings
(Menu 8.1.4)
This menu allows you to set up five proxy servers
for the WAP browser. Contact your service provider
for details about your Settings options.
For each server, the following options are available:
Profile name
: enter a name that you wish to
assign to the HTTP proxy server.
Homepage URL
: set the address of your startup
homepage. When the default homepage displays,
you can delete it using the
C
key and enter your
own choice.
Funbox
139
Bearer
: select a bearer to be used for each type of
network address accessed;
GPRS
or
Data
. The
remaining options depend on the Bearer setting.
When the bearer is set to
GPRS
:
Proxy setting
: enter the WAP gateway address
and port number required to connect to the
Internet.
User name
: enter the User ID required to connect
to the GPRS network.
Password
: enter the password required to connect
to the GPRS network.
APN
: enter the access point name used for the
address of the GPRS network gateway.
When the bearer is set to
Data
:
Proxy setting
: enter the WAP gateway address
required to connect to the Internet.
Login name
: enter the PPP server login ID.
Password
: enter the PPP server password.
Dial-up number
: enter the PPP server phone
number.
Data call type
: select a data call type;
Analogue
or
ISDN
.
Clear cache
(Menu 8.1.5)
You can clear the information stored in the cache,
the phone’s temporary memory which stores the
most recently accessed Web pages.
Press the
Yes
soft key to confirm the deletion.
Otherwise, press the
No
soft key.
Funbox
140
Games
(Menu 8.2)
You can download MIDlets (Java applications
running on mobile phones) from various sources
using the WAP Browser and store them in your
phone.
When you access the
Games
menu, the list of the
default games appears.
Downloading a new game
You can download more games from the web site
given by your service provider using the
New
games
option.
Launching a MIDlet
Note:
The procedure explained below is for the
default games. For downloaded games, the
procedure may be different.
1. Scroll to the MIDlet you want on the Games list
and press the
Launch
soft key.
2. On the startup screen of the MIDlet, scroll to an
option using the Navigation keys.
The following options are available:
•
START GAME
: starts a new game.
•
CONTINUE
: allows you to continue the last
game you were playing.
•
HIGH SCORE
: shows the high score table.
This option may not be available for some
games.
•
HOW TO PLAY
: shows how to play the game
and the key functions for the game.
•
OPTION
: allows you to switch on or off the
game sound.
Funbox
141
3. Press the key to confirm your selection.
Viewing MIDlet information
1. Scroll to the MIDlet you want and press the
Info
soft key.
The display shows information about the MIDlet,
such as the file size, application version, and its
vendor.
2. To scroll to other MIDlet information, press
the Navigation keys.
3. If you want to delete the MIDlet, press the
Delete
soft key and then press the
Yes
soft key
to confirm the deletion.
4. To exit and return to the Games list, press the
Back
soft key or the
C
key.
Note:
When you select the default games from the
list, the
Delete
option is not available, so
that you cannot delete them.
While you are playing a game, to Press the
adjust the sound volume Volume keys.
stop the game and return to the
startup screen
C
key.
exit the game key.
Funbox
142
Entering text
If you need to enter text while using a MIDlet, you
can use the following input modes:
Upper-case character mode
(
A
): allows you to
enter upper-case English characters.
Lower-case character mode
(
a
): allows you to
enter lower-case English characters.
Number mode
(
1
): allows you to enter numbers.
Symbol mode
: allows you to enter symbols. After
highlighting a symbol by pressing the Navigation
keys, press the key to insert it.
T9 mode
(
T9
): allows you to enter English
characters by pressing one key per letter. In this
mode, you can change the case by pressing the
0
key.
To change the text input mode, press the key
until the appropriate indicator appears.
Sounds
(Menu 8.3)
In this menu, you can view the list of sounds
downloaded from the web server or received in
multimedia messages. You can set the downloaded
sounds as the current ring tone or send them to
other phones.
Funbox
143
By pressing the
Options
soft key, you can use the
following options:
Rename
: allows you to change the name of the
sound.
Delete
: deletes the sound.
Set as ring tone
: sets the sound as your ring tone.
Using the
mMode downloads
option on the
sounds list, you can access the web site provided by
your service provider and download new sounds.
Images
(Menu 8.4)
In this menu, you can view the list of pictures
downloaded from the web server or received in
messages. You can set the downloaded photos as
the current background image or send them to
other phones.
If you set a photo or video file as your wallpaper, it
is designated as
My_photo
or
My_video
on the
list.
By pressing the
View
soft key, you can use the
following options:
Rename
: allows you to change the name of the
image.
Delete
: allows you to delete the image.
Set as wallpaper
: sets the image as your
wallpaper for the idle screen.
Using the
New wallpapers
option on the images
list, you can access the web site provided by your
service provider and download new images.
Funbox
144
Delete all
(Menu 8.5)
This menu allows you to delete all of the
downloaded items in the Games, Sounds, or
Images folders. You can delete all of the items at
one time.
When a confirmation message displays, press the
Yes
soft key to confirm.
Memory status
(Menu 8.6)
You can check the amount of the memory being
used and the memory remaining for games,
sounds, and images.
Games
: the display shows the total, free, and used
space and the number of games you downloaded.
Sounds & Images
: the display shows the total,
used, and free space, including each space used by
sounds and images.
To Press the
select a folder to clear Up or Down key. To delete
all of your items, select
All
.
place a check mark
Mark
soft key.
remove a check mark
Unmark
soft key.
delete the marked
items
Delete
soft key.
145
SIM AT
This menu is available if you use a SIM AT card that
provides additional services, such as news, weather,
sports, entrainment, and location services.
Available services may vary, depending on your
service provider’s plans.
For further details, see your SIM card instructions
or contact your service provider.
146
Solving problems
If you are experiencing problems with your phone,
perform the following simple checks before
contacting a service professional. This may save
you the time and expense of an unnecessary
service call.
When you switch on your phone, the
following messages may appear:
Insert SIM card
•Check that the SIM card is correctly installed.
Phone locked enter password
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
(PIN) supplied with the SIM card.
• The PIN Check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the
PIN check
menu
(
Menu 5.6.1
).
Enter PUK
• The PIN code was entered incorrectly three times
in succession and the phone is now blocked.
Enter the PUK supplied by your service provider.
Solving problems
147
“No service,” “Network failure” or “Not
done” displays
• The network connection was lost. You may be in a
weak signal area (in a tunnel or surrounded by
buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
You have entered a number but it was
not dialed
• Have you pressed the key?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
Your correspondent cannot reach you
• Is your phone switched on (the key pressed
for more than one second)?
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
Your correspondent cannot hear you
speaking
• Have you switched off the microphone?
• Are you holding the phone close enough to your
mouth? The microphone is located at the bottom
of the phone.
Solving problems
148
The phone starts beeping and
“**Warning** Low battery” flashes on
the display
• Your battery is insufficiently charged. Recharge
the battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display
( ); the number of bars indicates the signal
strength from strong ( ) to weak ( ).
• Try moving the phone slightly or moving closer to
a window if you are in a building.
No number is dialed when you recall a
phone book entry
• Check that the number has been stored correctly,
by using the Phone Book Search feature.
• Re-store the number, if necessary.
If the above guidelines do not help you to solve
the problem, take note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung after-
sales service.
149
Access codes
There are several access codes that are used by
your phone and its SIM card. These codes help you
protect the phone against unauthorized use.
When requested for any of the codes explained
below, enter the appropriate code (displayed as
asterisks) and press the
OK
soft key. If you make a
mistake, press the
C
key once or repeatedly until
the incorrect digit is cleared and then continue
entering the correct code.
The access codes, except for the PUK and PUK2
codes, can be changed using the
Security
menu
(
Menu 5.6
). See page 121 for further details.
Important!
Avoid using access codes resembling
emergency numbers, such as 911, so
that you do not accidentally dial an
emergency number.
Phone password
The Phone Lock feature uses the phone password to
protect your phone against unauthorized use. The
phone password is supplied with the phone and is
preset to “00000000” at the factory.
To See
activate/deactivate the
Phone Lock feature
page 122 (
Menu 5.6.3
).
change the phone
password
page 122 (
Menu 5.6.4
).
Access codes
150
PIN
The
P
ersonal
I
dentification
N
umber or PIN (4 to
8 digits) protects your SIM card against
unauthorized use. It is usually supplied with the SIM
card.
If you enter an incorrect PIN three times in
succession, the code is disabled and cannot be used
until you re-enable it by entering the PUK (see
below).
PUK
The 8-digit PUK (
P
IN
U
nblocking
K
ey) is required to
change a disabled PIN. The PUK may be supplied
with the SIM card. If not, or you have lost it, contact
your service provider.
To re-enable your PIN:
1. Enter the PUK and press the
OK
soft key.
2. Enter a new PIN of your choice and press the
OK
soft key.
3. When the
Confirm New PIN
message displays,
enter the same code again and press the
OK
soft
key.
If you enter an incorrect PUK ten times in
succession, the SIM card becomes invalid. Contact
your service provider for a new card.
To See
activate/deactivate the
PIN Check feature
page 121 (
Menu 5.6.1
).
change the PIN page 121 (
Menu 5.6.2
).
Access codes
151
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions, such
as setting the maximum cost of a call. These
functions are available if supported by your SIM
card.
If you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.
To change the PIN2, see page 124 (
Menu 5.6.8
).
PUK2
The 8-digit PUK2 (
P
IN
U
nblocking
K
ey 2), supplied
with some SIM cards, is required to change a
disabled PIN2. If you lose the code, contact your
service provider.
To re-enable your PIN2:
1. Enter the PUK2 and press the
OK
soft key.
2. Enter a new PIN2 of your choice and press the
OK
soft key.
3. When the
Confirm PIN2
message displays,
enter the same code again and press the
OK
soft key.
If you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your service
provider for a new card.
Access codes
152
Barring password
A 4-digit barring password is required when you use
the Call Barring function. You can obtain the
password from your service provider when you
subscribe to this function.
You can change this password in the
Call
barring
menu (
Menu
3.2
). See page 76 for further details.
153
Health and safety
information
125
Exposure to Radio Frequency (RF) Signals
Your wireless phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications Commission
(FCC) of the U.S. Government. These limits are part of
comprehensive guidelines and establish permitted
levels of RF energy for the general population. The
guidelines are based on the safety standards that were
developed by independent scientific organizations
through periodic and through evaluation of scientific
studies.
The standards include a substantial safety margin
designed to assure the safety of all persons, regardless
of age and health.
The exposure standard for wireless phones employs a
unit of measurement known as Specific Absorption
Rate (SAR). The SAR limit set by the FCC is 1.6W/kg *.
*In the U.S. and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg)
averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give
additional protection for the public and to account for any variations in measurements.
SAR Values
1. Head : 1.2(W/kg)
2. Bady-worn : 0.679(W/kg)
Health and safety information
154
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the
network. In general, the closer you are to a base
station, the lower the power output of the phone.
Precautions when using batteries
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge, the type of battery and the
charger used. The battery can be charged and
discharged hundreds of times, but it will gradually
wear out. When the operation time (talk time and
standby time) is noticeably shorter than normal,
it is time to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
Health and safety information
155
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-
approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than
a week, since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and lifetime of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
Health and safety information
156
Road safety
Your wireless phone gives you the powerful ability
to communicate by voice, almost anywhere,
anytime. But an important responsibility
accompanies the benefits of wireless phones, one
that every user must uphold.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, make sure that you are
following the special regulations in a given area or
country.
Operating environment
Remember to follow any special regulations in force
in any area and always switch your phone off
whenever it is forbidden to use it, or when it may
cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
Health and safety information
157
Electronic devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and
recommendations of Wireless Technology Research.
Persons with pacemakers:
• Should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone
is switched on
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimise potential interference
If you have any reason to suspect that interference
is taking place, switch your phone off immediately.
Hearing aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives.
Health and safety information
158
Other medical devices
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you
in obtaining this information. Switch your phone off
in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted facilities
Switch your phone off in any facility where posted
notices require you to do so.
Health and safety information
159
Potentially explosive environments
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
Users are advised to switch the phone off while at a
refuelling point (service station). Users are
reminded of the need to observe restrictions on the
use of radio equipment in fuel depots (fuel storage
and distribution areas), chemical plants or where
blasting operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
the areas below decks on boats, chemical transfer
or storage facilities, vehicles using liquefied
petroleum gas, such as propane or butane, areas
where the air contains chemicals or particles, such
as grain, dust or metal powders, and any other area
where you would normally be advised to turn off
your vehicle engine.
Health and safety information
160
Emergency calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical
emergencies, for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
To make an emergency call, proceed as follows.
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 112 or any other official
emergency number). Emergency numbers vary
by location.
3. Press the key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not cut off the call until given
permission to do so.
Health and safety information
161
Other important safety information
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty
installation or service may be dangerous and may
invalidate any warranty applicable to the device.
• Check regularly that all wireless phone equipment
in your vehicle is mounted and operating
properly.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
• Switch your phone off before boarding an aircraft.
The use of wireless phones in an aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
Health and safety information
162
Care and maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Keep the phone and all its parts and accessories
out of the reach of small children.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that corrode electronic
circuits.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
Health and safety information
163
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
• Use only the supplied or an approved
replacement antenna. Unauthorised antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
164
Glossary
To help you understand the main technical terms
and abbreviations used in this booklet, and to take
full advantage of the features of your mobile phone,
here are a few definitions:
Active folder
Ability to answer a call simply by opening the
phone.
Call barring
Ability to restrict outgoing and incoming calls.
Call diverting
Ability to reroute calls to another number.
Call holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call waiting
Informs you that you have an incoming call when
you are engaged on another call.
Caller line identification services (Caller ID)
Services allowing subscribers to view or block the
telephone numbers of callers.
Tri band
Ability to handle any of the following types of
network; GSM 850, GSM 1800, combined GSM 850/
1800 and GSM 1900 MHz bands, for greater call
success and wider roaming.
Glossary
165
EMS (Enhanced Message Service)
An adaptation of the Short Message Service (SMS)
that allows you to send and receive ring tones and
the service provider’s logo, as well as combinations
of simple media to and from EMS-compliant
handsets. Because EMS is based on SMS, it can use
SMS centres the same way that SMS does. EMS
works on all Global System for Mobile
communications (GSM) networks. EMS senders can
use text, melodies, photos, sounds, and animations
to enhance the expressive power of messages that
are limited by the display constraints of mobile
devices.
GPRS (General Packet Radio Service)
New non-voice value-added service that allows
information to be sent and received across a mobile
telephone network. GPRS provides continuous
connection to the Internet for mobile phone and
computer users. It is based on the Global System
for Mobile Communication (GSM) circuit-switched
cellular phone connections and the Short Message
Service (SMS).
GSM (Global System for Mobile
Communication)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
Glossary
166
Java
Programming language generating applications that
can run on all hardware platforms, whether small,
medium or large, without modification. It has been
promoted for and geared heavily to the Web, both
for public Web sites and Intranets. When a Java
program runs from a Web page, it is called a Java
applet. When it is run on a mobile phone or pager, it
is called a MIDlet.
MMS (Multimedia Message Service)
A message service for the mobile environment,
standardized by the WAP Forum and the 3rd
Generation Partnership Program (3GPP). For phone
users, MMS is similar to Short Message Service
(SMS)-it provides automatic, immediate delivery of
user-created content from phone to phone. The
message addressing used is primarily phone
numbers, thus the traffic goes from phone to
phone. MMS also provides support for e-mail
addressing, so that messages can be sent by e-
mail. In addition to the text content of SMS, MMS
messages can contain still images, voice or audio
clips, and also video clips and presentation
information.
Multi-party calling
Ability to establish a conference call involving up to
five additional parties.
Phone password
Security code used to unlock the phone when you
have selected the option to lock it automatically
each time it switches on.
Glossary
167
PIN (Personal Identification Number)
Security code that protects the phone against
unauthorised use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Roaming
Use of your phone when you are outside your home
area (when travelling for example).
SDN (Service Dialling Numbers)
Telephone numbers supplied by your network
provider and giving access to special services, such
as voice mail, directory inquiries, customer support
and emergency services.
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small slot
on the back of the phone and is protected by the
battery.
Glossary
168
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to
speak to the correspondent. The message created
or received can be displayed, received, edited or
sent.
Soft keys
Two keys marke
d
and on the phone, the
purpose of which:
• varies according to the function that you are
currently using.
• is indicated on the bottom line of the display just
above the corresponding key.
Voice mail
Computerised answering service that automatically
answers your calls when you are not available,
plays a greeting (optionally in your own voice) and
records a message.
Glossary
169
182
Index
A
Access codes
145
Active folder
128
Alarm
130
Alert on call
116
Alphabet mode, text input
48
Answering
call
25
Anykey answer
128
Auto redial
128
B
Background image
121
Backlight
time
122
Band selection
129
Battery
charging
19
installing
18
low indicator
20
precautions •
150
removing
17
C
Calculator
137
Calendar memos
copying
134
deleting
134
sending via IrDA
120
viewing
133
writing
132
Call back, message
71
Call records
incoming
100
missed
99
outgoing
100
Call time
101
Caller groups
searching
40
Caller ID
128
Calls
answering
25
,
56
forwarding
126
holding
52
making
22
redialing
23
rejecting
25
waiting
56
,
127
Camera
options
106
playing videos
110
recording videos
109
taking photos
103
viewing photos
108
Charging battery
19
Conference call
56
Connect tone
116
Currency exchange
143
D
Date, set
135
Deleting
calendar memos
134
call records
99
e-mail message
87
,
88
multimedia messages
80
,
81
phonebook
35
photo
108
task
140
text messages
70
,
72
video
110
voice memos
142
Delivery reports, message
94
Display
backlight
13
external
15
icons
13
settings
121
DTMF tones, send
54
E
Earpiece volume
24
E-mail messages
creating/sending
83
Index
183
deleting
87
,
88
reading
85
,
88
E-mail profile
98
Emergency calls •
156
EMS (Enhanced Message
Service)
67
Error tone
116
External display
15
F
FDN (Fixed Dial Number)
mode
127
Folder tone
115
Forwarding
e-mail message
87
multimedia message
80
Forwarding, calls
126
Funbox
130
G
Games
136
Graphic logo
123
Greeting message
123
H
Health and safety
149
I
Icons, description
13
Images, downloaded
139
Inbox, messages
e-mail
85
multimedia
78
Infrared, connect
117
International calls
22
Internet
130
J
Java service
136
K
Key volume
24
Keypad tones
selecting
113
sending
54
Keys
description
11
location
10
shortcut
129
L
Language, select
124
Last number, redial
23
Locking
media contents
126
phone
125
SIM card
127
Low battery indicator
20
M
Memory status
downloaded items
141
e-mail messages
92
phonebook
43
Menu style
122
Menus
accessing
59
list
60
Message tone
114
Messages
e-mail
83
greeting
123
multimedia
73
text
67
MIDlets
136
Minute minder
116
Missed calls
99
MMS (Multimedia Message
Service)
73
Morning call
130
Multimedia messages
creating/sending
74
deleting
80
,
81
reading
78
,
81
Index
184
Multi-party calls
56
Muting
all sounds
53
key tones
54
microphone
53
N
Network band, select
129
Network selection
128
Network services
126
Numbers, phone
storing
31
O
On/off switch, phone
21
Organizer
130
Outbox, messages
e-mail
88
multimedia
81
text
71
Own number
124
P
Password
phone
126
,
145
Phone
care and maintenance
•
158
display
13
icons
13
keys
11
layout
10
locking
125
password
145
resetting
129
switching on/off
21
unpacking
9
Phonebook
copying
35
deleting
35
dialing
36
editing
34
options
34
sending via IrDA
120
speed-dialing
37
storing
31
Photos
deleting
108
taking
103
viewing
108
PIM Sync
143
PIN
changing
125
description
146
PIN2
changing
127
description
147
Power on/off tone
115
Privacy
126
Problems, solve
142
PUK
146
PUK2
147
R
Received calls
100
Received messages
e-mail
85
multimedia
78
Recording
videos
109
voice memos
141
Redialing
automatically
128
manually
23
Resetting phone
129
Ring tone
112
Ring volume
112
Road safety •
152
Roaming
128
S
Safety
information
149
precautions
7
Schedule
132
Index
185
SDN (Service Dialling
Numbers)
43
Searching, phonebook
39
Security, calls
124
Sent messages
e-mail
88
multimedia
81
text
71
Service light
122
Shortcut, menu
129
Silent mode
28
SIM card
installing
17
locking
127
SMS (Short Message Service)
inbox
70
outbox
71
Soft keys
29
Sound settings
112
Sounds, downloaded
139
Speed-dialing
37
Switching on/off
microphone
53
T
Tasks, to do list
creating
138
editing
138
Templates
e-mail
89
multimedia
82
text
72
Text messages
creating/sending
67
deleting
70
,
72
reading
71
Time format
136
Time, set
134
To do list
138
Tone
connect
116
error
116
folder
115
keypad
113
message
114
minute minder
116
power on/off
115
ring
112
Travel adapter
19
TTY Settings
129
V
Vibration
28
,
113
Video
deleting
110
playing
110
recording
109
Voice memos
deleting
142
playing
142
recording
141
Volume, adjust
earpiece
24
keypad tone
24
ring
112
W
Waiting call
127
Wallpaper
121
WAP browser
accessing
130
cache, clear
136
favorites
133
setting
135
World time
135
Writing messages
e-mail
83
multimedia
74
text
67
Index
186
187
Access the
Menu
Functions
➀
Press the
Menu
soft key.
➁
Scroll using the
Navigation keys through
the list of the menus until
you reach the menu you
want.
➂
Press the
Select
soft key.
➃
Scroll using the Up and
Down keys through the
list of the options until the
one you want is selected.
➄
Press the
Select
soft key.
• Each of the two soft keys ( and
) perform the function indicated by
the text above it on the bottom line in
the display.
Switch On/Off Press and hold the
key.
Make a Call
➀
Enter the number.
➁
Press the key.
End a Call Briefly press the key.
View Missed
Calls
Immediately
After Missing
Them
➀
Open the phone and
press the
View
soft
key.
➁
Scroll using the Up
and Down keys through
the missed calls.
➂
To return the call, press
the key.
Answer a Call Open the phone
or
Press the key.
Adjust the
Volume Press the or key on
the left side of the phone.
SGH-P716 GPRS Telephone
Quick reference card
188
Choose the
Alert Type
➀
Select the
Alert type
menu (
Menu
4.3
).
➁
Select an option:
• Light only
•Melody
•Vibration
• Vibration+melody
➂
Press the
Select
soft key
Store
Numbers in
the
Phonebook
➀
Enter the name and press
the
Save
soft key.
➁
Select an icon.
➂
Press the
Select
soft key.
➃
Select a memory.
➄
Press the
Select
soft key.
➅
Enter the name.
➆
Press the
OK
soft key.
➇
Press the key to
return to Idle mode.
Search for a
Number in
the
Phonebook
➀
Press the
Ph.Book
soft
key.
➁
Select the
Search
option.
➂
Enter the first few letters
of the name.
➃
To scroll through the
names, press the Up or
Down key.
➄
Press the
Select
soft
key.
➅
To scroll through the
numbers, press the Up
or Down key.
➆
Press the key to dial.
Take a Phot o
➀
Press and hold the
key.
➁
Press the key or
Take
soft key.
➂
Press the
Save
soft key.
➃
Enter a name for the
photo.
➄
Press the
OK
soft key.