Samsung Electronics Co SGHP716 Dual-Band GSM Phone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	417864
Application ID	WtJaEN6O60IY2UVbh0+jHg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	301.89kB (3773567 bits)
Date Submitted	2004-04-27 00:00:00
Date Available	2004-04-27 00:00:00
Creation Date	2004-04-22 00:09:36
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2004-04-27 12:18:08
Document Title	Users Manual

Intellectual Property
TRI BAND GPRS Series
SGH-P716
Portable Digital Telephone
User Manual
Please read this manual before operating your phone,
and keep it for future reference.
2nd version
(11 26)
Printed in Korea
Code No.: GH68-xxxxxA
English.11/2003. Rev. 1.0
All Intellectual Property, as defined below, owned by or which is
otherwise the property of Samsung or its respective suppliers
relating to the SAMSUNG Phone, including but not limited to,
accessories, parts, or software relating thereto (the “Phone
System”), is proprietary to Samsung and protected under
federal laws, state laws, and international treaty provisions.
Intellectual Property includes, but is not limited to, inventions
(patentable or unpatentable), patents, trade secrets,
copyrights, software, computer programs, and related
documentation and other works of authorship. You may not
infringe or otherwise violate the rights secured by the
Intellectual Property. Moreover, you agree that you will not (and
will not attempt to) modify, prepare derivative works of, reverse
engineer, decompile, disassemble, or otherwise attempt to
create source code from the software. No title to or ownership
in the Intellectual Property is transferred to you. All applicable
rights of the Intellectual Property shall remain with SAMSUNG
and its suppliers.
Samsung Telecommunications America
(STA), Inc.
Headquarters:
1130 E. Arapaho Road
Richardson, TX 75081
Tel: 972-761-7000
Fax: 972-761-7001
Customer Care Center:
1601 E. Plano Parkway
Suite 150
Plano, TX 75047
Tel: 888-987-HELP (4357)
Fax: 972-761-7501
Internet Address: http://www.samsungusa.com/
wireless
©2003 Samsung Telecommunications America. All rights
reserved. No reproduction in whole or in part allowed without
prior written approval. Samsung is a registered trademark of
Samsung Electronics America, Inc. and its related entities.
Table of Contents
Important Safety Precautions......................... 7
Unpacking ...................................................... 9
Your Phone ................................................... 10
Phone Layout ........................................................
Display .................................................................
Service Light .........................................................
Camera ................................................................
10
13
16
16
Getting Started ............................................. 17
Installing the SIM Card ........................................... 17
Charging the Battery .............................................. 19
Switching the Phone On or Off ................................. 21
Call Functions ............................................... 23
Making a Call.........................................................
Adjusting the Volume .............................................
Answering a Call ....................................................
Viewing Missed Calls...............................................
Quickly Switching to Silent Mode ..............................
23
25
26
27
29
Selecting Functions and Options................... 31
Phonebook.................................................... 33
Storing a Number with a Name ................................
Using Phonebook Entry Options................................
Searching for and Dialing a Number in Phonebook ......
Editing a Caller Group.............................................
Speed-dialing ........................................................
Deleting All of the Phonebook Entries........................
Checking the Memory Status ...................................
33
36
37
39
40
41
42
Table of Contents
Entering Text ................................................ 43
Changing the Text Input Mode .................................
Using T9 Mode.......................................................
Using Alphabet Mode ..............................................
Using Number Mode ...............................................
Using Symbol Mode ................................................
44
45
47
48
48
Options During a Call .................................... 49
Putting a Call on Hold .............................................
Switching the Microphone Off (Mute) ........................
Muting or Sending Key Tones...................................
Sending a Sequence of DTMF Tones .........................
Searching for a Number in Phonebook ......................
Using the Message Service ......................................
Call Waiting...........................................................
Making a Multi-party Call.........................................
49
50
51
51
52
52
53
53
Using the Menus ........................................... 57
Accessing a Menu Function by Scrolling..................... 57
Using Shortcuts ..................................................... 58
List of Menu Functions ............................................ 58
Messages ...................................................... 65
Text Messages (Menu 1.1) ........................................
Multimedia Messages (Menu 1.2) ..............................
E-Mail Messages (Menu 1.3) .....................................
Push Message (Menu 1.4) ........................................
Delete All (Menu 1.5) ..............................................
Voice Mail (Menu 1.6) ..............................................
Memory Status (Menu 1.7) .......................................
Settings (Menu 1.8) ................................................
Table of Contents
65
71
80
86
87
88
89
89
Call Records.................................................. 97
Missed Calls (Menu 2.1) ........................................... 97
Received Calls (Menu 2.2) ........................................ 98
Dialled Calls (Menu 2.3) ........................................... 98
Delete All (Menu 2.4) .............................................. 99
Call Time (Menu 2.5) ............................................... 99
Call Cost (Menu 2.6) ............................................. 100
Camera ....................................................... 101
Take and Send (Menu 3.1) ..................................... 101
My Photo (Menu 3.2) ............................................. 104
MPEG (Menu 3.3) .................................................. 106
Sound Settings ........................................... 109
Ring Tone (Menu 4.1) ............................................
Ring Volume (Menu 4.2) ........................................
Alert Type (Menu 4.3) ...........................................
Keypad Tone (Menu 4.4)........................................
Message Tone (Menu 4.5) ......................................
Folder Tone (Menu 4.6) .........................................
Power On/Off (Menu 4.7) .......................................
Extra Tones (Menu 4.8) .........................................
109
109
110
110
110
112
112
112
Phone Settings ........................................... 113
Infrared Activate (Menu 5.1) ..................................
Display Settings (Menu 5.2) ...................................
Greeting Message (Menu 5.3) .................................
Own Number (Menu 5.4) .......................................
Language (Menu 5.5) ............................................
Security (Menu 5.6) ..............................................
Extra Settings (Menu 5.7) ......................................
Short Cut (Menu 5.8) ............................................
TTY Settings (Menu 5.9) ........................................
Reset Settings (Menu 5.10) ....................................
113
117
119
120
120
120
124
125
125
126
Table of Contents
Organizer.................................................... 127
Alarm (Menu 6.1) .................................................
Calendar (Menu 6.2) .............................................
Time & Date (Menu 6.3) ........................................
Calculator (Menu 6.4) ............................................
To Do List (Menu 7.5) ............................................
Voice Memo (Menu 6.6) .........................................
Currency Exchange (Menu 6.7) ...............................
Pims Sync (Menu 6.8) ...........................................
127
129
131
133
133
136
138
138
Network Services........................................ 139
Call Forwarding (Menu 7.1) ....................................
Call Barring (Menu 7.2) .........................................
Call Waiting (Menu 7.3) .........................................
Network Selection (Menu 7.4) ................................
Caller ID (Menu 7.5) .............................................
Closed User Group (CUG) (Menu 7.6) ......................
Band Selection (Menu 7.7) .....................................
139
140
142
143
144
144
146
Health and Safety Information ................... 166
Usage guidelines:
All about performance and safety ...........................
Maintaining Safe Use of and Access to Your Phone....
Caring for the Battery ...........................................
Acknowledging Special Precautions and FCC ............
FDA Consumer Update..........................................
CTIA Safety Information .......................................
Owner's Record ...................................................
User Guide Proprietary Notice ................................
166
168
171
172
174
183
187
187
STANDARD LIMITED WARRANTY ................ 188
Glossary ..................................................... 193
Index.......................................................... 198
Funbox ....................................................... 147
mMode (Menu 8.1)................................................
Games (Menu 8.2) ................................................
Sounds (Menu 8.3) ...............................................
Images (Menu 8.4) ...............................................
Delete All (Menu 8.5) ............................................
Memory Status (Menu 8.6) .....................................
147
153
155
156
157
157
Solving Problems ........................................ 159
Access Codes .............................................. 163
Phone Password...................................................
PIN ....................................................................
PUK....................................................................
PIN2 ..................................................................
PUK2..................................................................
Table of Contents
163
164
164
165
165
Table of Contents
Table of Contents
Important Safety Precautions
Read these guidelines before using your wireless phone.
Failure to comply with them may be dangerous or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving; park the vehicle
first.
Switching Off When Refuelling
Do not use the phone at a refuelling point (service station) or
near fuels or chemicals.
Switching Off in an Aircraft
Wireless phones can cause interference. Using them in an
aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch your phone off near medical equipment. Follow any
regulations or rules in force.
Interference
All wireless phones may be subject to interference, which
could affect their performance.
Special Regulations
Meet any special regulations in force in any area and always
switch off your phone whenever it is forbidden to use it, or
when it may cause interference or danger (in a hospital for
example).
Important Safety Precautions
Sensible Use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone is
switched on.
Unpacking
Your package contains the following items:
Emergency Call
Ensure the phone is switched on and in service. Key in the
emergency number for your present location, then press the
key. You must deactivate any unnecessary features before
you can make an emergency call. Give all the necessary
information as accurately as possible. Do not cut off the call
until given permission to do so.
Handset
Travel Adapter
Battery
Ear-microphone
Water Resistance
Your phone is not water-resistant. Keep it dry.
Accessories and Batteries
Use only Samsung-approved accessories and batteries. Use of
any unauthorized accessories could damage your phone and
may be dangerous.
Qualified Service
User’s Manual
Hand Strap
Holster
Only qualified service personnel may repair your phone.
Note: The items supplied with your phone may be different, depending
upon your country or service provider.
For more detailed safety information, see “Health and Safety
Information” on page 166.
You can obtain the following accessories for your phone from
your local Samsung dealer:
● Standard/extended batteries
● Ear-microphone
● Simple hands-free kit
● Car holder
● Cigarette lighter adapter
● Road antenna
● Travel charger/adapter
● Battery charger
● Battery case
Important Safety Precautions
Unpacking
Your Phone
Key(s)
In Menu mode, scroll through the menu options
and Phonebook.
Phone Layout
In Idle mode, allow you to access your favorite
menu options directly. For further details about
shortcuts, see page 125.
The following illustrations show the main elements of your
phone:
Earpiece
In Menu mode, the Left key returns to the previous
menu level and the Right key selects the current
menu.
Display
When entering text, move the cursor to the left
and right respectively.
Folder
In Idle mode, allow you to access your favorite
menu options directly. For further details about
shortcuts, see page 125.
Camera
Navigation (Up/Down/
Right/Left) keys
Camera key
Soft key (left)
Ear-microphone
jack
Dial/menu
confirmation key
Volume/menu
browse keys
Alphanumeric
keys
IrDA port
Soft key (right)
WAP Browser
key
Power on/off /
menu exit key
Cancel/
correction key
Microphone
Antenna
Service Light
Your Phone
10
(soft keys)
Perform the functions indicated by the text above
them, on the bottom line of the display.
In Idle mode, access the Camera menu to allow
you to use the camera application. Turns the
camera on when held down.
In Capture mode, works as a camera shutter.
In Idle mode, launches the WAP (Wireless
Application Protocol) browser.
Special
function keys
External display
Description
Makes or answers a call.
In Idle mode, recalls the last number you dialed or
received when held down.
In Menu mode, selects a menu function or stores
information that you have entered, such as a name
in the phone or SIM memory.
Your Phone
11
Key(s)
Description (Continued)
Deletes characters from the display.
In Menu mode, returns to the previous menu level.
Display
Display Layout
The display has three areas:
Ends a call. Also switches the phone on and off
when held down.
Icons
In Menu mode, cancels your input and returns to
Idle mode.
Text and
graphic area
In Idle mode, quickly accesses your voice mail
when held down.
Enter numbers, letters and some special
characters.
Enter special characters.
Perform various functions.
(on the left side of the phone)
During a call, adjust the earpiece volume.
In Idle mode with folder open, adjust the keypad
tone volume. With the folder closed, turn on the
external display when held down.
Menu
Ph.Book
Soft key
indicators
Area
Description
First line
Displays various icons. See page 14.
Middle lines
Displays messages, instructions and any
information that you enter, such as the
number you are dialing.
Last line
Shows the current functions assigned to the
two soft keys.
In Menu mode, scroll through the menu options
and Phonebook.
Your Phone
12
Your Phone
13
Icons
Icon
Icon
Description
Shows the received signal strength. The greater the
number of bars, the stronger the signal.
Description (Continued)
Appears when Mute mode is active.
Shows the level of your battery. The more bars you
see, the more power you have remaining.
Appears when a call is in progress.
Appears when you are out of your service area. When
it displays, you cannot make or receive a call.
Appears when you are connected to the GPRS network.
Appears when you are out of your home area and have
logged onto a different network; for example, when
travelling in other countries.
Backlight
The backlight illuminates the display and the keypad. When
you press any key or open the folder, the backlight turns on
and remains on for a given period of time, depending on your
setting in the Back Light menu (Menu 5.2.4). When no keys
are pressed, the display turns off after one minute to
conserve your battery power.
Appears when a new text message has been received.
To specify the length of time the backlight is active, set the
Back Light menu. See page 118 for further details.
Appears when a new voice mail message has been
received.
External Display
Appears when a new multimedia message has been
received.
Your phone has an external display on the folder. It indicates
when you have an incoming call or a message. It also alerts
Appears when you set an alarm to ring at a specified
time.
Appears when Silent mode is active or when you set
the Alert Type menu (Menu 4.3) so that the phone
vibrates when you receive a call. For further details,
see page 29 and page 110 respectively.
Appears when the IrDA port is active. For details, see
page 113.
Your Phone
14
Your Phone
15
you at the specified time when you have set an alarm by
displaying the corresponding icon on it.
Getting Started
When you close the folder, the display shows the current time
on both a digital clock and an analogue clock. You can set the
display to show the current date instead of the analogue clock
using the Front LCD Display menu (Menu 5.2.7). You can
also select how long the date or analogue clock displays. For
details, see page 119.
Installing the SIM Card
Service Light
The service light is on the top right corner of the phone. It
flashes when services are available on the phone.
To activate or deactivate the service light, set the Service
Light menu (Menu 5.2.5). See page 118 for further details.
Service light
When you subscribe to a cellular network, you are provided
with a plug-in SIM card loaded with your subscription details,
such as your PIN, any optional services available and so on.
Important! The plug-in SIM card and its contacts can be
easily damaged by scratches or bending, so be
careful when handling, inserting or removing
the card.
Keep all SIM cards out of the reach of small
children.
1. If necessary, switch off the phone by holding down the
key until the power-off image displays.
2. Remove the battery. To do so:
➀ Slide the battery lock towards the top of the phone.
➁ Lift the battery away, as shown.
➁
➀
Camera
The camera module on the top center of your phone allows
you to take a photo and record a video while on the move.
For further details about the Camera feature, see page 101.
Your Phone
16
Getting Started
17
3. Slide the SIM card into the SIM card socket, as shown, so
that it locks the card into position.
Make sure the gold contacts of the card face into the
phone.
Note: When you need to remove the SIM card, slide it upwards, as
shown, and take it out of the socket.
5. Press the battery down until it clicks into place. Make sure
that the battery is properly installed before switching the
power on.
Charging the Battery
Your phone is powered by a rechargeable Li-ion battery. A
travel adapter comes with your phone for charging the
battery. Use only approved batteries and chargers. Ask your
local Samsung dealer for further details.
The travel adapter allows you to use the phone while the
battery is charging, but this causes the phone to charge more
slowly.
4. Place the battery so that the tabs on the end align with the
slots at the bottom of the phone.
Getting Started
18
Note: You must fully charge the battery before using your phone for
the first time. A discharged battery is fully recharged in
approximately 200 minutes.
1. With the battery in position on the phone, plug the
connector of the travel adapter into the jack at the bottom
of the phone.
Getting Started
19
2. Plug the adapter into a standard AC wall outlet.
Switching the Phone On or Off
3. When charging is finished, unplug the adapter from the
power outlet and disconnect it from the phone by pressing
the buttons on both sides of the connector and pulling the
connector out.
1. Open the folder.
➀
➀
➁
Note: You must unplug the adapter before removing the battery from
the phone during charging; otherwise, the phone could be
damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time
remain, a warning tone sounds and a message repeats at
regular intervals on the display. If this happens, your phone
turns off the backlight to conserve the remaining battery
power.
2. Press and hold the
key until the phone switches on.
3. If the phone asks you to enter a password, enter the
password and press the OK soft key. The phone password
is preset to “00000000” at the factory. For further details,
see page 163.
4. If the phone asks for a PIN, enter the PIN and press the
OK soft key. For further details, see page 164.
The phone searches for your network and, after finding it,
the idle screen appears on the display. Now, you can make
or receive a call.
Note: The display language is preset to English at the factory. To
change the language, use the Language menu
(Menu 5.5). For further details, see page 120.
5. When you wish to switch the phone off, press and hold the
key until the power-off image displays.
When the battery level becomes too low, the phone
automatically turns off.
Getting Started
20
Getting Started
21
Call Functions
Making a Call
When the idle screen displays, enter the area code and phone
number, and then the
key.
Note: When you activate the Auto Redial option in the Extra
Settings menu (Menu 5.7), the phone automatically redials up
to ten times if the person does not answer the call or is already
on the phone. See page 124 for further details.
Making an International Call
1. Press and hold the 0 key.
The + character appears.
2. Enter the country code, area code and phone number and
press the
key.
Correcting the Number
To clear
Press the
the last digit displayed C key.
Getting Started
22
any other digit in the
number
Left or Right key until the cursor is
immediately to the right of the digit to
be cleared. Press the C key. You can also
insert a missing digit simply by pressing
the appropriate key.
the whole display
C key and hold it for more than one
second.
Call Functions
23
Ending a Call
Making a Call from Phonebook
When you want to end your call, briefly press the
key.
Redialing the Last Number
The phone stores the numbers you’ve dialed, received or
missed if the caller is identified. See “Call Records” on
page 97 for further details.
To recall any of these numbers:
1. If you have typed characters on the display, press the
key to return to Idle mode.
2. Press the
key to display a list of the last numbers in the
order you made or received them.
You can store the phone numbers that you use regularly in
the SIM card or the phone’s memory, which are collectively
called Phonebook. Simply select a name to recall the
associated number. For further details about the Phonebook
features, see page 33.
Adjusting the Volume
During a call, if you want to adjust the earpiece volume, use
the Volume keys on the left side of the phone.
Press the
key to increase the volume level and the
to decrease the level.
key
3. Use the Up and Down keys to scroll through the numbers
until the number you want highlights.
4.
To
dial the number
Press the
key.
edit the number
Options soft key and select Edit.
Change the number, referring to
“Correcting the Number” on
page 23.
delete the number
Options soft key and select Delete.
delete all of the
numbers on the Call
Log list
Options soft key and select Delete
All. For further details, see page 97.
Call Functions
24
In Idle mode with the folder open, you can also adjust the
keypad tone volume using these keys.
Call Functions
25
Answering a Call
Viewing Missed Calls
When somebody calls you, the phone rings and displays the
incoming call image.
When you are unable to answer a call for any reason, you can
find out who called you so that you can call the person back.
When the caller can be identified, the caller’s phone number,
or name if stored in your Phonebook, displays.
The number of calls you missed displays on the idle screen
immediately after a call is missed.
1. If necessary, open the folder. Press the
key or the
Accept soft key to answer the incoming call.
To view the missed call immediately:
When the Anykey Answer option in the Extra Settings
menu (Menu 5.7) is activated, you can press any key to
answer a call except for the
key and the Reject soft
key. See page 124.
When the Active Folder option in the Extra Settings
menu (Menu 5.7) is activated, you can answer the call
simply by opening the folder. See page 124.
Note: To reject the call, press and hold one of the Volume keys, or
key.
press the Reject soft key or
2. End the call by closing the folder or pressing the
key.
Note: You can answer a call while using Phonebook or menu features.
After ending the call, the phone returns to the function screen
you were using.
1. If the phone is closed, open the folder.
2. Press the View soft key.
The number for the most recent missed call displays, if
available.
3. To
scroll through the missed
calls
call the number displayed
edit or delete a missed call
number
Press the
Up or Down key.
key.
Select soft key. See below.
Editing a Missed Call Number
Note: When the number for the missed call is not available, the Edit
option does not display.
1. Press the Options soft key.
2. Press the Up or Down key to highlight the Edit option.
3. Press the Select soft key.
Call Functions
26
Call Functions
27
Quickly Switching to Silent Mode
4. Change the number.
5.
To
Press the
call the number
key.
store the number
Save soft key and enter the name
and location. For further details,
see page 33.
Deleting a Missed Call
1. Press the Options soft key.
Silent mode is convenient when you wish to stop the phone
from ringing, in a theatre for example.
In Idle mode, press and hold the
key until the “Silent
Mode” message and the Vibration icon ( ) display.
In Silent mode, your phone changes the sound settings as
follows:
Option
New Setting
Alert Type (Menu 4.3)
Vibration
2. If necessary, press the Up or Down key to highlight the
Delete option.
Keypad Tone (Menu 4.4)
Off
Message Tone (Menu 4.5)
Light + Vibration
3. Press the Select soft key.
Folder Tone (Menu 4.6)
Off
You can press the
feature.
Power on tone
Off
Extra Tones (Menu 4.8)
Off
key at any time to exit the Missed Call
Note: You can access the Missed Call feature at any time by selecting
the Missed Calls menu (Menu 2.1). For further details, see
page 97.
To exit and reactivate the previous sound settings, press and
hold the
key again until “Exit Silent Mode” appears. The
Vibration icon ( ) no longer displays.
Note: When you turn the phone off, Silent mode is automatically
deactivated.
Call Functions
28
Call Functions
29
Selecting Functions and
Options
Your phone offers a set of functions that allow you to
customize it. These functions are arranged in menus and submenus, accessed using the two soft keys marked
and
Each menu and sub-menu allows you to view and alter the
settings of a particular function.
The roles of the soft keys vary according to the function you
are currently using; the labels on the bottom line of the
display just above each key indicates its current role.
Example:
Service Provider
Wed 06 Mar
Positio
Only
Menu
Press the left soft key
to access Menu mode.
Call Functions
30
Ph.Book
Press the right soft key
to access the
Phonebook features.
Selecting Functions and Options
31
To view the various functions and options available and to
select the one you want:
To
Press the
You can store phone numbers and their corresponding names
in both your SIM card and your phone’s memories. They are
physically separate but are used as a single entity, called
Phonebook.
select the:
• function displayed
• option highlighted
Select soft key or the Right
key.
Storing a Number with a Name
view the next function or
highlight the next option on
a list
Down key or the
key on
the left side of the phone.
move back to the previous
function or option on a list
Up key or the
key on the
left side of the phone.
move back up one level in
the structure
Left key,
1. Press the appropriate soft key.
2.
Phonebook
exit the structure without
changing the settings
There are two ways to store a number:
● Using the Save soft key in Idle mode
● Using the New Entry option in the Phonebook menu
soft key or C key.
key.
In some functions, you may be asked for a password or PIN.
Enter the code and press the OK soft key.
Note: When you access a list of options, your phone highlights the
current option. If, however, there are only two options, such as
On/Off or Enable/Disable, your phone highlights the option
that is not currently active so that you can select it directly.
Storing a Number in Idle Mode
As soon as you start to enter a number, Save appears above
the left soft key to allow you to store the number in
Phonebook.
1. Enter the number you want to store.
Note: If you make a mistake while entering a number, correct it
using the C key. For further details, see page 23.
2. When you are sure that it is correct, press the Save soft
key.
3. Select an icon to identify the category of the number to be
stored. Three categories are available:
•
: Mobile phone number
•
: Office number
•
: Home number
To select the category, press the Left or Right key and
press the Select soft key.
Selecting Functions and Options
32
Phonebook
33
4. Select a memory location, either SIM or Phone, by
pressing the Up or Down key and press the Select soft
key.
Note: When you change phones, any numbers stored in your SIM
card memory are automatically available with the new
phone, whereas any numbers stored in the phone’s
memory must be reentered.
5. Enter a name and press the OK soft key.
For further details about how to enter characters, see
page 43.
6. If you do not want to save the number and name in the
suggested location, press the C key to clear the location
number and enter another location by pressing the
number keys.
7. Press the OK soft key to store the name and number.
After storing, the phone displays the Phonebook entry or
name you just created.
8.
To
Press the
use the entry options
Options soft key. For further
details, see page 36.
return to the idle screen
Phonebook
34
key.
Storing a Number Using the Phonebook Menu
1. When the idle screen displays, press the Ph.Book soft
key.
2. Scroll to New Entry by pressing the Up or Down key and
press the Select soft key.
3. Select an icon to identify the category of the number to be
stored by pressing the Left or Right key, and press the
Select soft key.
Note: The E-mail icon (
) is available in this step. It allows you
to save an e-mail address instead of a phone number.
4. Select a memory location, either SIM or Phone, by
pressing the Up or Down key and press the Select soft
key.
Note: When you are saving an e-mail address, SIM is not
available.
5. Enter a name and press the OK soft key.
For further details about how to enter characters, see
page 43.
6. Enter the number or e-mail address you want to store and
press the Save soft key.
7. Continue the procedure from step 6 on page 34 to store
the number.
Phonebook
35
Using Phonebook Entry Options
While accessing any Phonebook entry, press the Options soft
key to access the options for the entry.
To
Press the
select the highlighted
option
Select soft key or the Right key.
highlight a different
option
Up or Down key until the option you
want highlights.
The following options are available:
Paste: allows you to paste the number into the normal
dialing mode. Use this option to dial a number similar to one
in Phonebook, such as a different extension in the same
office.
Use the C key to change the number as required; see page 23
for further details. When you are ready to dial, press the
key.
Delete: allows you to delete the selected number from
Phonebook. You are asked to confirm that you wish to delete
the name and number by pressing the Yes soft key.
Copy: allows you to copy the number to another location. You
can select the memory and the location number.
Caller Group: allows you to organize your Phonebook entries
in caller groups so that the phone alerts you in a specific way
when a person from one of your groups calls you. Select one
of the ten groups available.
To remove an entry from a group, select the No Group
option.
For further details about how to change caller group
properties, see page 39.
Add Entry: allows you to add a new number to the currently
selected name.
Send via IrDA: allows you to send all numbers or one
number of the selected name to other IrDA-compatible
phones. For further details, see page 116.
Edit: allows you to edit the name and number.
Select One Entry to change the name and/or one number for
the selected entry. If you change the name, the number is
saved separately with the new name.
Select All Entry to change only the name of the entry.
Photo Caller ID: allows you to assign one of the photos you
took using the camera as a caller ID image to be displayed
when you receive a call from the selected number. For details
about the Camera feature, see page 101.
Searching for and Dialing a Number in
Phonebook
After storing numbers in Phonebook, you can search for them
in two ways; by name and by caller group.
Searching for a Number by Name
1. When the idle screen displays, press the Ph.Book soft
key.
2. Press the Select soft key when Search highlights. You are
asked to enter a name.
Phonebook
36
Phonebook
37
3. Enter the first few letters of the name that you want to
find.
4. If necessary, scroll to a group by pressing the Up or Down
key and press the View soft key.
The Phonebook entries are listed, starting with the first
entry matching your input.
The Phonebook entries in the caller group are listed.
5.
4. To
Press the
view the highlighted entry
View soft key.
select a different entry
Up or Down key until the entry
highlights.
look for a name starting
with a different letter
key labeled with the letter you
want.
5. Once you have found the entry, press the
key to dial
the number, or press the Options soft key to access the
Phonebook entry options; for further details, see page 36.
Searching for a Number by Caller Group
1. When the idle screen displays, press the Ph.Book soft
key.
2. Scroll to Group Search by pressing the Up or Down key
and press the Select soft key. You are asked to enter a
group name.
3. Enter the first few letters of the group name that you want
to find.
The caller groups are listed, starting with the first group
matching your input.
To
Press the
view the highlighted entry
View soft key.
select a different entry
Up or Down key until the entry
you want highlights.
6. Once you have found the entry, press the
key to dial
the number, or press the Options soft key to access the
Phonebook entry options; for further details, see page 36.
Editing a Caller Group
1. When the idle screen displays, press the Ph.Book soft
key.
2. Scroll to Group Edit by pressing the Up or Down key and
press the Select soft key.
3. Scroll through the group list by pressing the Up or Down
key.
4. When the group you want highlights, press the Options
soft key.
5. Select each option and change the settings, as you want.
The following options are available:
• Call Ring Tone: allows you to set a ring tone to be used
when you receive a voice call from a person in the
group.
• SMS Tone: allows you to set a ring tone to be used
when you receive a message from a person in the group.
Phonebook
38
Phonebook
39
• Graphic: allows you to set a graphic icon to be displayed
when you receive a call from a person in the group.
• Group Name: allows you to assign a name to the group.
For further details about how to enter characters, see
page 43.
6. When you are finished, press the C or
key.
Speed-dialing
Once you have stored phone numbers in Phonebook, you can
set up to eight speed-dial entries and then dial them easily
whenever you want, simply by pressing the associated
number key.
Setting Up Speed-dial Entries
1. When the idle screen displays, press the Ph.Book soft
key.
2. Scroll to Speed Dial by pressing the Up or Down key and
press the Select soft key.
3. Select the key to which you wish to assign the speeddialing number, from the 2 to 9 keys, and press the OK
soft key.
Note: Memory location 1 is reserved for your Voice Mail server
number.
If you have already assigned a number to the key, the
Options soft key replaces the OK soft key. Go to step 6.
4. Select a Phonebook entry from the list and press the View
soft key.
Phonebook
40
5. Select a number, if the entry has more than one, by
pressing the Up or Down key and press the Select soft
key.
6. Once you have assigned a number to the key, you can use
the following options by pressing the Options soft key:
• Change: allows you to assign a different number to the
key.
• Delete: allows you to clear the setting so that no
number is assigned to the key.
• Delete All: allows you to clear the settings for all keys
so that no numbers are assigned to any of the keys.
• Number: allows you to view the number assigned to the
key.
7. When you are finished, press the C or
key.
Speed-dialing from Phonebook
To speed-dial the numbers assigned to keys 2 to 9, press and
hold the appropriate key.
Deleting All of the Phonebook Entries
You can delete all of entries in the selected memory or both
memories.
1. When the idle screen displays, press the Ph.Book soft
key.
2. Scroll to Delete All by pressing the Up or Down key and
press the Select soft key.
Phonebook
41
3. To place a check mark by the memory you want to empty,
All, SIM or Phone, press the Mark soft key.
Entering Text
4. When you are finished marking, press the Delete soft key
to delete the entries in the selected memory.
When using your phone, you will often need to enter text,
such as when storing a name in Phonebook, creating your
personal greeting or scheduling events on your calendar. You
can enter alphanumeric characters by using your phone’s
keypad.
5. Enter the phone password and press the OK soft key.
Your phone has the following text input modes:
You can remove the check mark by pressing the Unmark
soft key.
Note: The password is preset to “00000000” at the factory. To
change this password, see page 122.
6. When the confirming message appears, press the Yes soft
key.
To cancel the deletion, press the No soft key.
7. When you are finished, press the C or
key.
Checking the Memory Status
You can check how many names and numbers are stored in
Phonebook, in both the SIM card and phone memories. You
can also see the capacity of both memories.
1. When the idle screen displays, press the Ph.Book soft
key.
2. Select the Memory Status option by pressing the Up or
Down key and press the Select soft key.
3. Press the Up or Down key to view the number of existing
and total entries available in the SIM card and phone’s
memory.
4. When you are finished, press the C or
Phonebook
42
● T9 mode
This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more than
one letter; for example, when you press the 5 key once, J,
K or L displays. T9 mode automatically compares your
keystrokes with an internal linguistic dictionary to
determine the correct word, thus requiring far fewer
keystrokes than the traditional Alphabet mode.
● Alphabet mode
This mode allows you to enter letters by pressing the key
labeled with the letter you want. Press the key once, twice,
three or four times until it displays.
● Number mode
This mode allows you to enter numbers.
● Symbol mode
This mode allows you to enter various symbols and special
characters.
key.
Entering Text
43
Changing the Text Input Mode
Using T9 Mode
When you are in a field that allows characters to be entered,
you will notice the text input mode indicator on the display.
T9 ia a predictive text input mode that allows you to key in
any character using single keystrokes. This text input mode is
based on a built-in dictionary.
Example: Writing a text message
To enter a word in T9 mode:
Write New
Positio
Options
To select
1. When you are in T9 mode, start entering a word by
pressing the 2 to 9 keys. Press each key only once for
each letter.
Only
Example: To enter “HELLO” in T9 mode, press the 4, 3, 5,
5 and 6 keys.
Text input
mode indicator
Press the right soft key
until
T9 mode
displays. See page 45.
Alphabet mode
displays. See page 47.
Number mode
displays. See page 48.
Symbol mode
Entering Text
44
the symbol list displays. See
page 48.
The word that you are typing appears on the display. It
may change with each key that you press.
2. Enter the whole word before editing or deleting the
keystrokes.
3. When the word displays correctly, go to step 4.
If not, press the 0 key or the Up or Down key repeatedly
to display alternative word choices for the keys that you
have pressed.
Example: Both “OF” and “ME” use the 6 and 3 keys. The
phone displays the most commonly used choice
first.
4. Insert a space by pressing the
the next word.
key and start entering
Entering Text
45
To add a new word into the T9 dictionary:
Using Alphabet Mode
1. After pressing the keys corresponding to the word you
want to add, press the 0 or Down key to display the
alternative words.
Use the 1 to 0 keys to enter your text.
2. When you press the 0 or Down key at the last alternative
word, the display shows Add on the bottom line. Press the
Add soft key.
3. If necessary, clear the word using the C key and enter the
word you want to add using Alphabet mode. See page 47.
4. Press the OK soft key.
The word is added to the T9 dictionary and becomes the
first word for the associated keypress.
● To enter periods, hyphens or apostrophes, press the 1 key.
T9 mode applies grammar rules to ensure that the correct
punctuation is used.
Example: The 1 key is used twice to display two
punctuation marks:
1. Press the keys labeled with the letter you want:
- Once for the first letter
- Twice for the second letter
- And so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a different key.
When entering the same letter twice or a different letter on the
same key, just wait for a few seconds for the cursor to move to
the right automatically, and then select the next letter.
Refer to the table below for further details about the
characters available:
Key
Characters in the Order Displayed
Upper Case
Lower Case
Space
’
● To shift the case in T9 mode, use the
three cases; Initial Capital (
Lower case ( ).
key. There are
), Capital lock ( ) and
● You can move the cursor by using the Left and Right keys.
To delete letters, press the C key. Press and hold the C key
to clear the display.
Entering Text
46
Entering Text
47
● To insert a space, press the
key.
● To shift the case in Alphabet mode, use the
are three cases; Initial Capital (
Lower case ( ).
key. There
), Capital lock ( ) and
● You can move the cursor using the Left and Right keys. To
delete letters, press the C key. Press and hold the C key to
clear the display.
Using Number Mode
Number mode enables you to enter numbers into a text
message. Press the keys corresponding to the digits you want
to enter.
Using Symbol Mode
Symbol mode enables you to insert symbols into a text
message.
To
Press the
select a symbol
corresponding number key.
display more symbols
Up or Down key.
clear the symbol(s)
C key. When the input field is
empty, this key returns the screen
to the previous mode.
insert the symbol(s) into
your message
OK soft key.
return to the previous mode
Back soft key.
Entering Text
48
Options During a Call
Your phone provides a number of control functions that you
can use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you want.
You can make another call while you have a call in progress if
your network supports this service.
To place a call on hold, simply press the Hold soft key. You
can reactivate the call whenever you want, by pressing the
Unhold soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or look it up
in Phonebook.
For details about searching for a number in Phonebook,
see page 37.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or,
1. Put the current call on hold by pressing the Hold soft key.
2. Make the second call in the normal way.
Options During a Call
49
When you have an active call and a call on hold, you may
switch between the two calls, changing the one on hold to
active and placing the other on hold.
3. Press the OK soft key.
To switch between the two calls, simply press the Swap soft
key.
Muting or Sending Key Tones
The current call is placed on hold and the call on hold is
reactivated so that you can continue conversing with the
other person.
When you want to finish, end each call normally by pressing
the
key.
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s microphone off so
that the other person on the phone cannot hear you.
Example: You wish to say something to another person in the
room but do not want the person on the phone to
hear you.
The other person can hear you again.
These options allow you to turn the key tones off or on. If the
Mute Keys option is selected, your phone does not transmit
the DTMF (Dual Tone Multi-Frequency) tones of the keys,
which allows you to press keys without hearing annoying key
tones during a call.
Note: To communicate with answering machines or computerized
telephone systems, the Send Keys option must be selected.
Sending a Sequence of DTMF Tones
You can send the DTMF tones after entering the entire
numbers you need to send.
To switch the microphone off temporarily:
This option is helpful for entering a password or an account
number when you call an automated system, like a banking
service.
1. Press the Options soft key.
To send the DTMF tones:
2. Press the Down key to highlight the Mute option.
1. When you are connected to the teleservice system, press
the Options soft key.
3. Press the OK soft key.
The other person can no longer hear you.
To switch the microphone back on:
1. Press the Options soft key.
2. If necessary, press the Down key to highlight the Unmute
option.
Options During a Call
50
2. Press the Down key to highlight the Send DTMF option.
3. Press the OK soft key.
4. Enter the number you want to send and press the OK soft
key.
The tones are sent.
Options During a Call
51
Searching for a Number in Phonebook
Call Waiting
You can search for a number in Phonebook during a call.
You can answer an incoming call while you have a call in
progress, if your network supports this service and you have
set the Call Waiting menu (Menu 7.2) to Activate; see
page 142. You are notified of an incoming call by a call
waiting tone.
1. Press the Options soft key.
2. Press the Down key to highlight the Phonebook option.
3. Press the OK soft key.
The Phonebook entries are listed.
4. Enter the name that you wish to find.
If you enter the first few letters of the name, the
Phonebook entries are listed, starting with the first entry
matching your input.
5. To view the highlighted entry, press the View soft key.
For further details about the Phonebook feature, see page 33.
Using the Message Service
If you receive an SMS (Short Message Service) message
during a call, the Message icon ( ) flashes on the display.
The SMS Service option enables you to read the message or
send a new message.
For further details about the Message feature, see page 65.
To answer a call while you have a call in progress:
1. Press the
key to answer the incoming call. The first call
is automatically put on hold.
2. To switch between the two calls, press the Swap soft key.
3. To end the call on hold, press the Options soft key and
select the End Held Call option.
To end the current call, press the
key.
Making a Multi-party Call
A multi-party call is a network service that allows up to six
people to take part simultaneously in a multi-party or
conference call. For more information about subscribing to
this service, contact your service provider.
Setting up the Multi-party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The first call
is automatically put on hold.
3. To join the first participant to the multi-party call, press
the Options soft key and select the Join option. Press the
OK soft key.
Options During a Call
52
Options During a Call
53
4. To add a new person to the multi-party call, call the person
in the normal way and press the Options soft key. Select
the Join option and press the OK soft key.
You can add incoming callers by answering the call, pressing
the Options soft key, and selecting the Join option. Repeat
as required.
Having a Private Conversation With One
Participant
1. Press the Options soft key and choose the Select One
option. Press the OK soft key.
The list of call participants appears.
2. Highlight a person from the list by pressing the Up or
Down key, and press the Select soft key or the
key.
Dropping One Participant
1. Press the Options soft key and choose the Select One
option. Press the OK soft key.
The list of call participants appears.
2. Highlight a person from the list by pressing the Up or
Down key, and press the Select soft key or the
key.
3. Press the Down key to select the Remove option and
press the OK soft key.
The call ends with that participant, but you can continue to
talk to the others.
4. When you want to end the multi-party call, press the
key.
3. When the Private option highlights, press the OK soft
key.
Now you can talk privately to that person. The other
participants can still converse with each other.
4. To return to the multi-party call, press the Options soft
key and select the Join option. Press the OK soft key.
All the multi-party call participants can now hear each
other.
Options During a Call
54
Options During a Call
55
Using the Menus
The phone offers a range of functions that allow you to tailor
it to your needs. These functions are arranged in menus and
sub-menus.
The menus and sub-menus can be accessed by scrolling using
the Navigation keys or by using the shortcuts.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Scroll using the Up or Down key to reach a main menu,
Phone Settings for example. Press the Select soft key or
the Right key to enter the menu.
3. If the menu contains sub-menus, Language for example,
you can access them by scrolling using the Up or Down
key and pressing the Select soft key or the Right key.
If the menu that you have selected contains further
options, repeat this step.
4.
To
Press the
scroll through the menus
Up or Down key, or use the
Volume keys.
confirm the chosen setting
Select soft key or the Right
key.
return to the previous menu
level
exit the menu without
changing the settings
Options During a Call
56
soft key or the Left key.
key.
Using the Menus
57
Using Shortcuts
1. Messages
When the menu style is set to Bar Style or Page Style (see
page 117), the menu items, such as menu, sub-menu and
options, can be accessed quickly by using their shorcut
number.
Notes:
● The numbers assigned to each menu are indicated on the
list on page 59. They may not match the menu number on
the phone, depending on the services supported by your
SIM card.
● For the menu numbers, 10, 11 and 12, use the 0,
and
keys respectively.
Example: Accessing the Language menu.
1. Press the Menu soft key.
2. Press the 5 key for Phone Settings.
3. Press the 5 key for Language.
The languages available display.
List of Menu Functions
The following list shows the menu structure available and
indicates the number assigned to each option and the page
where you can find a description of each feature.
Note: If you use a SIM AT card that provides additional services, the
SIM AT menu displays when you press the Menu soft key to
enter Menu mode. For further details, see your SIM card
instructions.
Using the Menus
58
(see page 65)
1.1 Text Messages
1.1.1 Write New
1.1.2 Inbox
1.1.3 Outbox
1.1.4 Templates
1.2 Multimedia Messages
1.2.1 Write New
1.2.2 Inbox
1.2.3 Outbox
1.2.4 Draft
1.2.5 Templates
1.3 E-Mail Messages
1.3.1 Write New
1.3.2 Inbox
1.3.3 Outbox
1.3.4 Draft
1.3.5 Templates
1.4 Push Message
1.4.1 Inbox
1.4.2 Receive
1.4.3 Delete All
1.5 Delete All
1.5.1 Text Message
1.5.2 Multimedia Message
1.5.3 E-Mail Message
1.6 Voice Mail
1.6.1 Connect to Voice Server
1.6.2 Voice Server Number
1.7 Memory Status
1.7.1 Text Messages
1.7.2 Multimedia Messages
1.7.3 E-Mail Messages
Using the Menus
59
1. Messages
(continued)
1.8 Settings
1.8.1 Text Messages
1.8.2 Multimedia Messages
1.8.3 E-Mail Messages
1.8.4 MMS Profile
1.8.5 E-mail-Profile
1.9 Broadcast
2. Call Records
(see page 97)
2.1
2.2
2.3
2.4
2.5
Missed Calls
Received Calls
Dialled Calls
Delete All
Call Time
2.5.1 Last Call Time
2.5.2 Total Sent
2.5.3 Total Received
2.5.4 Life Time
2.5.5 Reset Timers
2.6 Call Cost*
2.6.1 Last Call Cost
2.6.2 Total Cost
2.6.3 Maxt Cost
2.6.4 Reset Counters
2.6.5 Set Max Cost
2.6.6 Price/Unit
3. Camera
(see page 109)
3.1 Take and Send
3.2 My Photo
3.3 MPEG
3.3.1 Record
3.3.2 Files
3.3.3 Sample File
3.4 Memory Status
4. Sound Settings
(see page 109)
4.1
4.2
4.3
4.4
4.5
Ring Tone
Ring Volume
Alert Type
Keypad Tone
Message Tone
4.5.1 SMS Tone
4.5.2 SMS-CB Tone
4.5.3 MMS Tone
4.6 Folder Tone
4.7 Power On/Off
4.8 Extra Tones
5. Phone Settings
(see page 113)
5.1 Infrared Activate
5.1.1 With PC
5.1.2 With other Phone
5.2 Display Settings
5.2.1 Wallpaper
5.2.2 Menu Style
5.2.3 Brightness
5.2.4 Back Light
5.2.5 Service Light
5.2.6 Graphic Logo
5.2.7 Front LCD Display
* Shows only if supported by your SIM card.
Using the Menus
60
Using the Menus
61
5. Phone Settings
(continued)
5.3
5.4
5.5
5.6
Greeting Message
Own Number
Language
Security
5.6.1 PIN Check
5.6.2 Change PIN
5.6.3 Phone Lock
5.6.4 Change Password
5.6.5 Privacy
5.6.6 SIM Lock
5.6.7 FDN Mode
5.6.8 Change PIN2
5.7 Extra Settings
5.8 Short Cut
5.8.1 Key Up
5.8.2 Key Down
5.8.3 Key Right
5.8.4 Key Left
5.9 TTY Settings
5.10 Reset Settings
6. Organizer
(see page 127)
6.1 Alarm
6.1.1 Once Alarm
6.1.2 Daily Alarm
6.1.3 Morning Call
6.1.4 Remove Alarm
6.1.5 Autopower
6.2 Calendar
6.3 Time & Date
6.3.1 Set Time
6.3.2 Set Date
6.3.3 World Time
6.3.4 Time Format
6.3.5 Set Time from Network
6.4 Calculator
Using the Menus
62
6. Organiser
(continued)
6.5 To Do List
6.6 Voice Memo
6.6.1 Record
6.6.2 Memo List
6.6.3 Delete All
6.6.4 Memory Status
6.7 Currency Exchange
6.8 Pims Syinc
6.8.1 Sync Executing
6.8.2 View Sync Result
6.8.3 Sync Setting
6.8.4 Network Setting
6.8.5 API Test
7. Network Services
(see page 139)
7.1 Call Forwarding
7.1.1 Forward Always
7.1.2 Busy
7.1.3 No Reply
7.1.4 Unreachable
7.1.5 Cancel All
7.2 Call Barring
7.2.1 All Outgoing
7.2.2 International
7.2.3 International Except to Home
7.2.4 All Incoming
7.2.5 Incoming While Abroad
7.2.6 Cancel All
7.2.7 Change Barring password
7.3 Call Waiting
7.4 Network Selection
7.5 Caller ID
7.6 Closed User Group
7.7 Band Selection
Using the Menus
63
8. Funbox
(see page 147)
8.1 mMode
8.1.1 Home
8.1.2 Bookmarks
8.1.3 http://
8.1.4 Settings
8.1.5 Clear Cache
8.2 Games
8.3 Sounds
8.4 Images
8.5 Delete All
8.6 Memory Status
8.6.1 Games
8.6.2 Sounds & Images
Messages
Using the Messages menu, you can use various message
features, such as:
● short text messages
● multimedia messages
● e-mail messages
● WAP push messages
● voice mail
● cell broadcast messages
Text Messages
(Menu 1.1)
Short Message Service (SMS) allows you to send and receive
short text messages to and from other GSM mobile phones.
In addition, your phone supports the Enhanced Messaging
Service (EMS), which enables you to include simple pictures,
melodies, and animated images in your messages. To use this
feature, you must subscribe to your service provider’s
message service.
When the Text Message icon ( ) appears, you have received
new text messages. If the memory is full, an error message
displays and you cannot receive any new messages. Use the
Delete option in each message box to delete the obsolete
ones.
Write New (Menu 1.1.1)
In this menu, you can write and send a text message.
Note: When you add media objects to the message, the number of
characters you can enter decreases.
Using the Menus
64
Messages
65
Creating a Simple Text Message
Creating a Message Using the Options
1. Create your message.
1. Create a message.
Note: For further details about entering characters, see page 43.
2. When you finish entering the message, press the Options
soft key. The following options are available:
• Send Only: allows you to send the message. The
message is deleted after sending.
2. Press the Options soft key.
3. Select one of the following options by using the Up and
Down keys and pressing the Select soft key:
• Text Formatting: allows you to format the style of the
text.
• Save and Send: allows you to save a copy of the
message and then send the message. You can read the
message in your Outbox.
For the Size attribute, Normal, Large and Small sizes
are available. For the Underline and Strikethrough
attributes, select On or Off.
• Save Only: allows you to save the message so that it
can be sent later. You can read the message in your
Outbox.
These attributes can be combined.
• For further details about Text Formatting, Add
Objects, Add Templates, Add Phonebook, Add
Bookmark and Language options, see page 67.
3. Select Send Only or Save and Send, and press the
Select soft key.
If you want to just save the message, select Save Only.
After saving the message, the phone returns to the Text
Messages menu.
4. If you select a save option, choose the memory location
and press the OK soft key.
5. Enter a destination number and press the OK soft key.
The message is sent.
Note: When the phone fails to send the message, it will ask you if you
want to retry. Press the OK soft key to confirm. Otherwise,
press the Exit soft key to return to the Write New screen.
Messages
66
• Add Objects: allows you to add a sound, melody,
picture or animated image to the message. Select the
category of the object to be added. In each category,
you can select from the various factory-set items or
choose an item received from other sources, such as the
Internet or other phones.
• Add Templates: allows you to apply one of the preset
message templates to the text. Select one of nine
messages stored in the Templates menu (Menu
1.1.4). For further details, see page 70.
• Add Phonebook: allows you to add a Phonebook entry
to your message. Select one from the list.
• Add Bookmark: allows you to add a web page’s
address stored in your Bookmark list. Select one from
the list.
• Language: allows you to change the language to be
used in T9 input mode. Select the language you want to
use.
4. Complete the message, and send or save it by following
the procedure from step 2 on page 66.
Messages
67
Inbox (Menu 1.1.2)
Move to SIM: allows you to move the message from the
phone’s memory to the SIM card. This option is only available
when you select a message stored in the phone’s memory.
This message box is used to store the messages that you
have received.
When you enter this menu, the list of messages in the box
displays with the senders’ phone numbers or names, if
available in your Phonebook. The icons on the left tell you the
status of the messages:
●
: Messages that have been opened.
●
: Messages that are unopened.
Outbox (Menu 1.1.3)
This message box is used to store the messages that you
have already sent or will send.
1. Select a message from the list and press the View soft
key to read the message contents.
2. To scroll through the contents, press the Up or Down key.
3. To scroll to the previous or next message, press the
key.
Select Object: allows you to save media objects, such as
sounds or images, from the message into your phone. You
can use the objects when writing a message. For details, see
page 67.
or
While reading a message, you can choose the following
options by pressing the Options soft key:
Delete: allows you to delete the message.
Send: allows you to send/resend the message. For further
details about how to send a message, see page 66.
Text Reply: allows you to reply to the sender by sending a
text message.
Call Back: allows you to call the sender back.
Cut Address: allows you to extract the sender’s number and
URL, e-mail addresses or phone numbers from the message
text.
When you enter this menu, the list of messages in the box
displays with the recipients’ phone numbers or names, if
available in your Phonebook. The icons on the left tell you the
status of the messages:
●
: Messages currently being sent
●
: Messages sent
●
: Messages your phone couldn’t send
●
: Messages to be sent
●
: Messages deferred
1. Select a message from the list and press the View soft
key to read the message contents.
2. To scroll through the contents, press the Up or Down key.
3. To scroll to the previous or next message, press the
key.
or
Move to Phone: allows you to move the message from the
SIM card to the phone’s memory. This option is only available
when you select a message stored in the SIM card.
Messages
68
Messages
69
While reading as message, you can choose the following
options by pressing the Options soft key:
Delete: allows you to delete the message.
Send: allows you to send/resend the message. For further
details about how to send a message, see page 66.
Cut Address: allows you to extract the destination number
and URL, e-mail addresses or phone numbers from the
message text.
Move to Phone: allows you to move the message from the
SIM card to the phone memory. This option is only available
when you select a message stored in the SIM card.
Move to SIM: allows you to move the message from the
phone’s memory to the SIM card. This option is only available
when you select a message stored in the phone’s memory.
Select Object: allows you to save media objects, such as
sounds or images, from the message into your phone. You
can use the objects when writing a message. For details, see
page 67.
Templates (Menu 1.1.4)
Using this menu, you can use one of preset messages to
make new messages.
Select a message from the list and press the Options soft
key.
Send Message: allows you to retrieve the message. Once
you have completed the message, you can send, save and
send, or simply save it. For further details about how to send
a message, see page 65.
Delete: allows you to delete the message. You are asked to
confirm the deletion by pressing the Yes soft key.
Multimedia Messages
(Menu 1.2)
This menu allows you to use the Multimedia Message Service.
Multimedia Message Service (MMS) is a messaging service
very similar to Short Message Service (SMS). It provides
automatic and immediate delivery of personal multimedia
messages from phone to phone or from phone to e-mail.
In addition to the familiar text content of text messages,
multimedia messages can contain images, graphics, voice and
audio clips. An MMS message is a multimedia presentation in
a single entry. It is not a text file with attachments.
Using the MMS feature, your phone can receive and send
messages that contain multimedia files, such as your photos,
sounds and images you downloaded from the Internet and
voice memos you recorded. This function is available only if it
is supported by your service provider. Only phones that offer
multimedia message features can receive and display
multimedia messages.
The following options are available:
Edit: allows you to write a new message or edit the message.
Note: For further details about how to enter characters, see page 43.
Messages
70
Messages
71
Write New (Menu 1.2.1)
This menu allows you to create a new multimedia message
and then send it to multiple destinations.
Creating and Sending a Picture Message
1. Enter the subject of your message and press the OK soft
key.
For further details about entering characters, see page 43.
2. When Add Here highlights, press the Options soft key
and add the message contents using one of the following
options:
• Add Text: enter the message text and press the OK soft
key.
• Add My Photo: allows you to add a picture you took
using the camera on your phone. Select Take Photos to
take a new picture, or My Photos to add one of the
pictures store in the phone. For further details about
using the camera, see page 101.
• Add Picture: allows you to add a picture stored in the
Images folder (Menu 8.4). Choose a picture and press
the Select soft key. You may not be able to add some
downloaded images if they are not in the correct format.
• Add Sound: allows you to add a sound file. Select
Record to record a new voice memo, or Sound List to
add one of the sounds in the Sounds folder (Menu 8.3)
or voice memo list (Menu 6.6.2). You may not be able
to add some downloaded sounds if they are not in the
correct format.
• Send: allows you to send the message. Use this option
when you finish creating the message.
Messages
72
• Save: saves the message in the Draft (Menu 1.2.4) or
Templates (Menu 1.2.5) box for later use.
• Settings: allows you to change the message settings.
For details about setting options, see page 91. After
changing the settings, you need to press the
soft key
or the C key to go to back to the options screen.
• Add Destination: allows you to enter destination
numbers or addresses. See steps 6 to 10 starting from
page 74. After adding them, you need to press the
soft key or the C key to go to back to the options screen.
• Preview: shows your message as it will display on the
recipient’s phone.
Note: You can add text, an image and a sound once for each page.
3. Repeat step 2 until you finish creating your message.
4. If you want to change the added items, press the Up or
Down key to highlight one and press the Options soft key.
Note: The options available are different depending on whether
the item you select on the message screen is text, an
image, sound or the page field.
The following options are available:
• Edit Text/Picture/Sound: allows you to change the
text or replace the image or sound with another one.
• Add Page: allows you to add more pages.
After you add a page, the display shows you the current
page number and the memory space used for the page.
You can move to each page using the Left or Right key
on the message screen.
• Delete: deletes the item from your message.
Messages
73
• Duration: allows you to set when a text, an image or a
sound displays on the message presentation screen and
the length of time it will display for. When the message is
opened, the display shows the item after a specified time
in Set Start Time and scrolls to the next item after a
specified time in Set Duration.
• Send: allows you to send the message.
• Save: saves the message in the Draft (Menu 1.2.4) or
Templates (Menu 1.2.5) box for later use.
• Settings: allows you to change the message settings.
For details about setting options, see page 91.
• Add Destination: allows you to enter destination
numbers or addresses. See steps 6 to 10.
• Preview: shows your message as it will display on the
recipient’s phone.
9. When the correct number or address displays, press the
OK soft key.
10.To add a destination, press the Select soft key when Add
Destination highlights. Repeat from step 7.
If you want to edit the destinations, select one and press
the Select soft key. You can change or delete it.
11.To enter additional numbers or addresses to the other
destination types, press the C key or the
soft key and
repeat steps 6 through 10.
You can enter up to 10 destinations each for To, CC and
Bcc.
12.When you are finished entering the destinations, select
Send Message and press the Select soft key.
Your phone sends the message.
5. When you are finished creating the message, choose Send
from the options and press the Select soft key.
Inbox (Menu 1.2.2)
6. Select a destination type (To, Cc or Bcc) and press the
Select soft key.
Viewing a Message When You Receive it
7. Choose one of the following options and press the Select
soft key:
When a new multimedia message comes in, the display shows
a text notification along with the sender’s number.
• Phone Number: allows you to enter the phone number
you want.
1. Press the Select soft key to view brief information about
the message, such as the sender’s number, the message
size and the subject.
• E-Mail Address: allows you to enter the e-mail address
of the recipient.
If you want to view the message later in the Inbox, press
the Exit soft key.
• Phone Book: allows you to retrieve a number from your
Phonebook.
2. To scroll through the message information, press the Up or
Down key.
8. Enter a number or an e-mail address, or select a number
from Phonebook.
Messages
74
Messages
75
3. Press the Options soft key to use the following options:
• Retrieve: retrieves the message from the MMS server.
• Delete: deletes the message.
• More Properties: shows you detailed information about
the message.
4. To read the message, press the Select soft key when
Retrieve is highlighted.
Your phone retrieves the message contents from the
server and displays it.
5. To scroll through the message, press the Up or Down key.
6. When you are finished, press the
key.
Viewing a Received Message in the Inbox
When you access the Inbox menu (Menu 1.2.2), the list of
multimedia messages you received displays with the senders’
phone numbers, if they are available in your Phonebook, or
subjects. The icons on the left tell you the status of the
messages.
●
: Messages that have been opened.
●
: Messages that are unopened.
1. Select a message on the list and press the Select soft key.
The message displays and scrolls to the next page, if it has
one, after a specified time; for details about setting the
time, see page 91.
2. Press the OK soft key to go to the message view screen.
Or, the display automatically switches to the screen after a
few seconds.
Messages
76
3. To scroll through the message, press the Up or Down key.
If the message has more than one page, you can scroll
through the pages by using the Left and Right keys.
While viewing a message, you can choose the Message
options by pressing the Options soft key.
If you are viewing a new message, the options are the same
as when you view a message as soon as you receive it. See
page 76.
When you are reviewing a message retrieved from the MMS
server, the following options are available:
Delete: deletes the message.
Reply: allows you to reply to the sender by sending a text or
multimedia message.
Call Back: allows you to call the sender back.
Cut Address: allows you to extract the sender’s number or email address and URL, e-mail addresses or phone numbers
from the message text.
Forward: allows you to forward the message to another
person.
Save Picture: allows you to save an image from the
message into your phone. Images are stored in the Images
folder (Menu 8.4).
Save Sound: allows you to save a sound from the message
into the Sounds folder (Menu 8.3).
Properties: shows you information about the message, such
as the message status, subject, sender’s address or phone
number, message size, priority and the time and date when
the message was received.
Messages
77
Outbox (Menu 1.2.3)
When you access this menu, the list of the multimedia
messages you sent or saved displays. The icons on the left tell
you the status of the messages.
Edit Message: allows you to change the message contents,
sound, picture or text.
Properties: shows you information about the message, such
as the message status, subject, sender and recipients’
addresses or phone numbers, message size, priority and the
time and date when the message was sent.
●
: Messages currently being sent
●
: Messages sent
●
: Messages your phone couldn’t send
Draft (Menu 1.2.4)
●
: Messages to be sent
●
: Messages deferred
After creating a multimedia message, you can store it in this
message box for later sending.
1. Select a message on the list and press the View soft key.
The message displays and scrolls to the next page, if it has
one, after a specified time; for details about setting the
time, see page 91.
2. Press the OK soft key to go to the message view screen.
For further details about viewing a message, see “Outbox” on
page 78.
Templates (Menu 1.2.5)
This menu stores messages you saved as templates so that
you can use them to make new messages.
Or, the display automatically switches to the screen after a
few seconds.
1. Scroll through the template list using the Up and Down
keys.
3. To scroll through the message, press the Up or Down key.
2. When the message template you want highlights, press
the Select soft key.
If the message has more than one page, you can scroll
through the pages by using the Left and Right keys.
While viewing a message, you can choose the following
options by pressing the Options soft key:
Delete: deletes the message.
Cut Address: allows you to extract the destination numbers
or e-mail addresses and URL, e-mail addresses or phone
numbers from the message text.
Send: allows you to resend the message.
3. Press the OK soft key to use the following options, or the
display automatically shows the options after a specified
time:
• Edit Message: allows you to send a message using the
template. For further details about how to send a
message, see page 72.
• Delete: allows you to delete the message. You are
asked to confirm the deletion by pressing the Yes soft
key.
4. Press the
Messages
78
key to return to Idle mode.
Messages
79
E-Mail Messages
(Menu 1.3)
You can send or receive e-mail messages directly using your
phone. Using the E-mail feature, you can receive or send
sounds and pictures, as well as Phonebook entries or calendar
memos.
• Add Destination: allows you to add destination
addresses. See steps 5 to 9. After adding, press the
soft key or the C key to go back to the Write Option
screen.
• Information: shows the e-mail subject, the list of the
recipients you added, if any, and message text.
To use this feature, you need to subscribe to an e-mail
message service and set up your e-mail account. For further
details, contact your service provider.
4. When you have finished creating the e-mail, choose Send
from the options and press the Select soft key.
Write New (Menu 1.3.1)
5. Select To, Cc, or Bcc to enter a destination address and
press the Select soft key.
To write and send an e-mail message:
1. Enter the subject of your e-mail and press the OK soft key.
For further details about entering characters, see page 43.
2. Enter the e-mail text and press the Options soft key.
3. Press the Up or Down key to select an option and press the
Select soft key.
The following options are available:
• Add Attachments: enables you to attach one of your
Phonebook entries, memos stored on your calendar,
pictures or sounds. After selecting the file type you want
to add, choose an item from the list. After adding, press
the
soft key or the C key to go back to the Write
Option screen.
If you want to remove an attached item, select
Attachment View and select it on the list. Press the
View soft key and then the Discard soft key.
• Send: sends your message.
• Save: saves the message in the Draft (Menu 1.3.4) or
Templates (Menu 1.3.5) box for later use.
Messages
80
6. Choose one of the following options and press the Select
soft key:
• Direct Enter: allows you to directly enter the e-mail
address you want.
• Phone Book: allows you to retrieve an e-mail address
from your Phonebook.
7. Enter an e-mail address and press the OK soft key, or
select one from Phonebook and press the Select soft key.
8. When the correct address displays, select To, Cc, or Bcc
and press the Select soft key.
9. When there is an e-mail address already entered in the
selected destination type, press the Select soft key when
Add Destination highlights. Repeat from steps 6 to 8.
If you want to edit the destinations, select one and press
the Select soft key. You can change or delete it.
10.When you have finished adding the destinations, press the
Select soft key when Send E-Mail highlights.
Your phone sends the e-mail.
Messages
81
Inbox (Menu 1.3.2)
This menu allows you to access your e-mail Inbox and read
the e-mail messages you received.
1. Press the Select soft key when Check E-Mail highlights.
2. Select the e-mail account from which you want to retrieve
e-mails and press the Select soft key.
Note: For further details about setting up an e-mail account, see
page 89.
The list of e-mail messages you received displays. The
icons on the left tell you the status of each message:
•
: The header hasn’t been read
•
: The header has been read.
•
: The contents have been read.
•
•
: The message has attachments and the contents
have been read.
: The message has been deleted from both the phone
and e-mail server. This icon disappears when you
disconnect the phone from the server.
3. Scroll to an e-mail from the list and press the Select soft
key.
When the e-mail is not read, the display shows you its
header, such as sender’s name, e-mail address, Cc
address(es), date when the message was sent and
subject.
If the e-mail has already been read, the display
immediately shows you its text. Skip to step 6.
4. Press the Options soft key.
The following options are available:
• Retrieve: retrieves the e-mail text from the e-mail
server.
• Delete: deletes the e-mail. You can select to either
delete it from your phone or from both the phone and email server.
• Disconnect: disconnects your phone from the e-mail
server.
5. Select Retrieve and press the Select soft key.
The phone displays the e-mail text.
6. To scroll through the text, press the Up or Down key.
You can read the next or previous pages using the Right
and Left keys.
After opening an e-mail, you can use the following options by
pressing the Options soft key:
Delete: deletes the e-mail. You can select to either delete it
from your phone or from both the phone and e-mail server.
Reply: allows you to send a reply to the sender.
Forward: allows you to forward the e-mail to another person.
Cut Address: allows you to extract the sender’s address, the
Cc addresses and URL, e-mail addresses or phone numbers
from the message text.
Attachments: allows you to view the attachments, such as
Phonebook entries, calendar memos, sounds or pictures. You
can save them into your phone’s memory.
Disconnect: disconnects your phone from the e-mail server.
Messages
82
Messages
83
Information: shows the e-mail header, such as the sender’s
name and e-mail address, Cc address(es), subject and e-mail
text.
Send: allows you to resend the e-mail.
Outbox (Menu 1.3.3)
Edit E_Mail: allows you to change the message subject or
contents.
When you select this menu, the list of the e-mail messages
you sent or failed to send displays along with the message
status and subject. The icons on the left tell you the
messages’ status:
Save: allows you to save the e-mail in the Draft (Menu
1.3.4) or Templates (Menu 1.3.5) box for later use.
Add Attachments: enables you to attach another item to the
message.
●
: E-mail your phone couldn’t send.
Draft (Menu 1.3.4)
●
: E-mail with attachments your phone couldn’t send.
In this menu, you can retrieve the messages you saved.
●
: E-mail your phone successfully sent.
When you select this menu, the list of the e-mail messages
you saved displays. The icons on the left tell you the
messages’ status:
●
: E-mail with attachments your phone successfully
sent.
●
: E-mail your phone is sending.
●
: Saved e-mail.
●
: E-mail with attachments your phone is sending.
●
: Saved e-mail with attachments.
●
: E-mail your phone will send.
●
: E-mail with attachments your phone will send.
For further details about selecting a message and using the
message options, see page 84.
1. Select a message from the list and press the Select soft
key to read it.
The display shows you the recipients’ addresses, time and
date when the message was sent, and message text.
2. To scroll through the contents, press the Up or Down key.
After opening an e-mail, you can use the following options by
pressing the Options soft key:
Delete: deletes the e-mail.
Cut Address: allows you to extract the destination addresses
and URL, e-mail addresses or phone numbers from the
message text.
Messages
84
Templates (Menu 1.3.5)
This menu stores the e-mail messages you saved as
templates so that you can use them to make new messages.
When you select this menu, the list of the e-mail messages
you saved displays. The icons on the left tell you the
messages’ status:
●
: Saved e-mail.
●
: Saved e-mail with attachments.
Scroll to the template you want using the Up or Down keys
and press the Select soft key. The display shows the message
information.
Messages
85
Press the Options soft key to use the following options:
Delete All
Edit E-mail: allows you to change the message subject or
contents.
This menu allows you to delete all of the messages in each
message box. You can also delete all of your messages at one
time.
Send: allows you to send the message.
Save: makes a copy of the message in the Draft (Menu
1.3.4) or the Templates (Menu 1.3.5) box for later use.
Delete: deletes the selected message.
Add Attachments: enables you to attach one of your
Phonebook entries, memos stored on your calendar, pictures
or sounds. See page 80 for further details.
Push Message
(Menu 1.4)
(Menu 1.5)
1. Select a message type and press the Select soft key.
2. To
Press the
select a message box
to clear
Up or Down key. To delete all of
your messages, select All
Messages.
place a check mark
Mark soft key.
remove a check mark
Unmark soft key.
In this menu, you can receive and access web messages from
the server.
3. To delete the marked messages, press the Delete soft
key.
The following options are available:
4. When a confirming message displays, press the Yes soft
key to confirm.
Inbox: allows you to read the messages received from the
web server.
Receive: allows you to set whether or not your phone
receives web messages. Select Always to receive web
messages or Never to reject web messages.
Delete All: allows you to delete all of the web messages.
Messages
86
Messages
87
Voice Mail
Memory Status
(Menu 1.6)
(Menu 1.7)
This menu allows you to access your voice mailbox, if your
network supports this service.
You can check the amount of the memory being used and the
memory remaining for messages.
The following options are available:
Text Messages: shows the number of messages currently
stored and the total number of messages you can store in the
SIM, Phone and CB memories. If necessary, press the Up or
Down key to scroll through the screen.
Connect to Voice Server: before using the Voice Mail
feature, you must enter the voice server number obtained
from your service provider; see menu option 1.6.2. You can
then select this option and press the OK soft key to listen to
your messages.
You can quickly connect to the voice server by pressing and
holding the 1 key in Idle mode.
Voice Server Number: allows you to change the voice mail
server number, if necessary.
To
Press the
enter the server number
corresponding numeric
keys.
correct a digit
C key.
move the cursor to the left or
right without clearing a digit
Left or Right key.
Note: Voice Mail is a network feature. Please contact your service
provider for further details.
Multimedia Messages: shows the space, including the free
and used space, and how much space is currently occupied by
each message box, press the Up or Down key to scroll
through the screen.
E-Mail Messages: shows the total space, including the free
and used space. It also shows how much space is currently
occupied by each message box.
Settings
(Menu 1.8)
This menu allows you to configure various settings for using
the Message feature.
Text Messages (Menu 1.8.1)
In this menu, you can set up default SMS/EMS information. A
setting group is a collection of settings required to send
messages. The number of setting groups available depends
on the capacity of your SIM card.
Notes:
• The setting options available in this menu may be different
depending on your service provider.
• The last setting you accessed is automatically activated for sending
messages.
Messages
88
Messages
89
Setting x (where x is the setting group number): each group
has its own sub-menu.
Multimedia Messages (Menu 1.8.2)
Service Centre: allows you to store or change the number of
your message center, which is required when sending
messages. You must obtain this number from your service
provider.
The following options are available:
Default Destination: allows you to store the default
destination number. The number automatically displays on
the Destination screen when you create a message.
Default Type: allows you to set the default message type to
Text, Fax, Email or Paging. The network can convert the
messages into the selected format.
Default Validity: allows you to set the length of time your text
messages are stored in the message center while attempts
are made to deliver them.
Setting Name: allows you to give a name to the setting group
currently being defined.
Common Setting: The following options are available:
Reply Path: allows the recipient of your message to send you
a reply through your message center, if your network
supports this service.
Delivery Reports: allows you to activate or deactivate the
report function. When this function is activated, the network
informs you whether or not your message has been delivered.
Bearer Selection: allows you to choose either GSM or GPRS,
depending on your network.
Messages
90
You can change the default settings for sending or receiving
multimedia messages.
Delivery Report: when this option is enabled, the network
informs you whether or not your message has been delivered.
Read Reply: when this option is enabled, your phone sends a
request for a reply along with your message to the recipient.
Auto Download: you can set whether or not your phone
retrieves new incoming messages from the MMS server
without notifications. As soon as you receive a message, you
can use more options while you are reading it. See page 68
for details about the options.
Message Acceptance: you can specify the category of
messages you want to receive.
Hide ID: when this option is enabled, your phone number
does not display on the recipient’s phone.
Expiry Date: you can select the length of time your
messages are stored in the message centre after they are
sent.
Delivery Time: you can set a delay time before the phone
sends your messages.
Priority: you can select the priority level of your messages.
Report Allowed: when this option is enabled, the sender of
an incoming message receives a delivery report from the
network.
Page Duration: you can set the length of time one page of a
received message displays on the message presentation
screen. After a specified time, the display automatically
scrolls to the next page.
Messages
91
E-Mail Messages (Menu 1.8.3)
You can change the default setting options for using the Email message feature.
The following options are available:
Check Interval: allows you to select how often the phone
checks the server for incoming messages.
Signature: allows you to attach your name, phone number,
simple memo or tag line as a signature to your e-mail
messages.
Account: you can configure up to five e-mail accounts using
different service providers. The last account you accessed is
automatically activated for sending or receiving e-mail
messages.
Send Copy to Self: allows you to set whether or not your
phone sends a copy of the outgoing e-mail to the e-mail
address specified in your account.
For each account, the following options are available:
MMS Profile (Menu 1.8.4)
Account Name: enter a name for the current account.
In this menu, you can configure various network settings that
are required when you send or receive multimedia messages.
Connect Name: select one of the profiles set in the E-mailProfile menu (Menu 1.8.5).
Name: enter the name to be displayed in your outgoing
messages as the sender name.
E-Mail Address: enter your e-mail address.
Protocol Type: specify an e-mail protocol type for the
incoming server, either POP3 or IMAP4. Contact your e-mail
service provider for more information.
Notes:
• The last profile you accessed is automatically activated for sending
messages.
• If you change the MMS settings without first checking with your
service provider, the MMS feature may not work properly.
• The availability of the setting options may vary depending on your
country.
The following options are available for each profile:
For the IMAP4 protocol, you can set whether or not the phone
retrieves e-mails with attachments. You can also select the
number of e-mail headers you want to retrieve.
Profile name: enter a name that you wish to assign to the
MMS server.
Incoming Server: enter the IP address or domain name of the
server to be used for receiving messages. Your e-mail service
provider can give you this information.
Security: select a data transmission mode. Choose Secure
to protect your data against unauthorised access; otherwise,
choose Non-secure.
User ID: enter your e-mail ID.
IP address: enter the gateway address required to connect
to the MMS server.
Password: enter your e-mail password.
Outgoing Server: enter the IP address or domain name of the
server to be used for sending messages. Your e-mail service
provider can give you this information.
Messages
92
Connection URL: enter the address of your MMS server.
User name: enter the user ID required to connect to the
MMS server.
Messages
93
Password: enter the password required to connect to the
MMS server.
APN: enter the access point name used for the address of the
MMS server.
For further details, contact your service provider.
Broadcast (Menu 1.9)
This network service allows you to receive text messages on
various topics, such as the weather or traffic. Cell Broadcast
(CB) messages display as soon as they are received, provided
that:
● the phone is in Idle mode.
E-mail-Profile (Menu 1.8.5)
● the Receive option is set to Enable.
In this menu, you can configure various network settings that
are required when you send or receive e-mail messages.
● the message channel is currently active on the channel list.
Notes:
• Your service provider can give you information about each setting.
• If you change the e-mail settings without first checking with your
service provider, the E-mail feature may not work properly.
The following options are available for each profile:
Profile Name: enter a name that you wish to assign to the email profile.
Connect Name: enter a descriptive name for the connection.
User Name: enter the user ID required to access the GPRS
network.
Password: enter the password required to access the GPRS
network.
APN: enter the access point name used for the address of the
GPRS network gateway.
The following options are available:
Read: lets you view the received message. The Volatile box
displays the messages from the network, but loses its
contents as soon as the phone is switched off. Scroll through
the message by using the Up and Down keys. While reading a
message, press the Save soft key to store the message in the
Archive box for later retrieval.
Receive: allows you to enable or disable the reception of
broadcast messages.
Channel list: allows you to indicate the channels from which
you wish to receive broadcast messages. The following
options are available:
Select: use to enable or disable channels on the list by
marking or unmarking them respectively. A check mark
displays in front of each selected channel.
Add channel: use to enter the ID and title for a new channel.
Delete: use to remove a channel from the list.
Edit: use to change the ID and title of an existing channel.
Messages
94
Messages
95
Call Records
In this menu, you can view the:
● calls you missed, received or dialed.
● length of your calls.
● cost of your calls.
Notes:
• You can access the numbers in the three types of call records by
pressing the
key in Idle mode.
• The number of call records the phone can store may be different
depending on your SIM card.
Missed Calls
(Menu 2.1)
This menu lets you view the last 20 numbers of the calls you
received, but did not answer.
The number or name, if available, display together with the
time and date when the call was received.
By pressing the Options soft key, you can:
● edit the number, if available, and dial it or save it in
Phonebook.
● delete the call from the list.
You can also dial the number by pressing the
Messages
96
key.
Call Records
97
Received Calls
Delete All
(Menu 2.2)
This menu lets you view the last 20 numbers of the calls you
received.
The number or name, if available, display together with the
time and date when the call was received.
(Menu 2.4)
This menu allows you to delete all of the records in each call
record. You can also delete all of your call records at one time.
To
Press the
By pressing the Options soft key, you can:
select a call record to
clear
Up or Down key. To delete all of
your call records, select All Calls.
● edit the number, if available, and dial it or save it in
place a check mark
Mark soft key.
remove a check mark
Unmark soft key.
delete the marked
records
Delete soft key.
Phonebook.
● delete the call from the list.
You can also dial the number by pressing the
Dialled Calls
key.
(Menu 2.3)
This menu lets you view the last 20 numbers you dialed.
When a confirming message displays, press the Yes soft key
to confirm.
The number or name, if available, display together with the
time and date when the call was made.
Call Time
By pressing the Options soft key, you can:
This menu lets you view the timers for calls you made and
received.
● edit the number and dial it or save it in Phonebook.
● delete the call from the list.
You can also dial the number by pressing the
key.
(Menu 2.5)
Note: The actual time invoiced for calls by your service provider may
vary, depending on network features, rounding-off for billing
purposes and so on.
The following options are available:
Last Call Time: length of the last call.
Total Sent: total length of all calls you made since the timer
was last reset.
Total Received: total length of all calls you received since
the timer was last reset.
Call Records
98
Call Records
99
Life Time: the number and total duration of all calls made to
or from your phones since the phone was shipped form the
factory. This timer cannot be reset.
Reset Timers: option used to reset the call timers. You must
first enter the phone password and then press the OK soft
key.
Note: The password is preset to “00000000” at the factory. To change
this password, see page 122.
Call Cost
(Menu 2.6)
This network feature lets you view the cost of calls. This menu
may not be available depending on your SIM card.
The following options are available:
Camera
Using the camera module embedded in your phone, you can
take photos of people or events while on the move.
Additionally, you can send photos to other people in a
multimedia message or set one as a wallpaper.
You can also record videos using your phone as a camcorder.
CAUTION
• Do not take photos of people without their permission.
• Do not take photos in a place where cameras are not allowed.
• Do not take photos in a place where you may interfere with another
person’s privacy.
Take and Send
(Menu 3.1)
Last Call Cost: cost of the last call you made.
In this menu, you can take a photo. The camera produces
JPEG photos.
Total Cost: total cost of all calls you made since the cost
counter was last reset. If the total cost exceeds the maximum
cost set in the Set Max Cost option, you can no longer make
any calls until you reset the counter.
Note: When you take a photo in direct sunlight or in bright conditions,
shadow may appear on the photo.
Max Cost: maximum cost set in the Set Max Cost option.
See below.
Reset Counters: option used to reset the cost counter. You
must first enter your PIN2 (see page 165) and then press the
OK soft key.
1. Accessing the Take and Send menu turns on the camera
on the top center of the phone. Or you can press and hold
the
key in Idle mode.
The image to be captured appears on the display.
2. Adjust the image by rotating the camera module and
aiming it at the subject.
Set Max Cost: option used to enter the maximum cost that
you authorise for your calls. You must first enter your PIN2
(see page 165) and then press the OK soft key.
Price/Unit: option used to set the cost of one unit; this price
per unit is applied when calculating the cost of your calls. You
must first enter your PIN2 (see page 165) and then press the
OK soft key.
Call Records
100
Camera
101
• Use the Left key to adjust the display size.
• Use the Right key to zoom in or out.
When you press the Options soft key after saving a photo,
the following options are available:
• Use the Up and Down keys to adjust the brightness of
the image.
Send by MMS: allows you to send the photo using a
multimedia message. For further details, see page 72.
• Use the Volume keys on the left side of the phone to flip
the image vertically.
• To use the flash when it is dark, press the right soft key.
Set This Photo: allows you to set the image as your
wallpaper for the idle screen or a caller icon image for the
Phonebook entries.
• To use the camera options, press the left soft key. For
details, see page 103.
Protection: allows you to set the protection to keep the
photo from being deleted.
3. Press the
key or Take soft key to take the photo.
4. Press the Save soft key.
To discard the photo and return to the capture mode,
press the Cancel soft key.
5. Enter a name for the photo, if necessary, press the C key
to clear the default name.
For further details about entering characters, see page 43.
Using the Camera options
In Capture mode, you can use various options by pressing the
Options soft key.
To
Press the
scroll to an option
Up or Down key.
select the highlighted option
Select soft key or the Right
key.
6. Press the OK soft key to save the name.
return to Capture mode
7. To
Press the
use the photo options
Options soft key. For further
details, see page 103.
return to Capture mode
Cancel soft key or C key.
return to Idle mode
Camera
102
soft key or C key.
key.
The following options are available:
Effects: allows you to change the color tone or apply special
effects to the photo.
Frames: allows you to use a decorated frame. Select a frame
from the list using the Navigation keys.
Camera
103
Multi-Shot: allows you to take a series of action stills. Set up
the Speed and Time options and select the number of photos
for the camera to take.
After taking photos, press the Save All soft key to save all of
them or the Save soft key to save the selected one.
Rotation: rotates the photo. You can reverse the photo as a
mirror image or flip the photo vertically.
Self Timer: allows you to have a delay time before the
camera takes the photo. Select the length of time you want.
When you press the
key, the camera takes the photo after
a specified time.
Photo Size: sets the image size to either
MY Display(176x160), QCIF(176x144),
QVGA(320x240), CIF(352x288) or VGA(640x480). The
selected image size displays on the capture screen.
Image Quality: allows you to select the image quality from
Super Fine, Fine, Normal, and Economy. The selected
quality displays on the capture screen.
My Photo
(Menu 3.2)
This menu allows you to review your photos. When you
access this menu, your phone displays the latest photo on the
full screen. Use the Left and Right keys to scroll to the photos.
View: shows the photo on the full screen, which is the default
mode.
Press the Options soft key to use the following options:
Send by MMS: allows you to send the photo as a multimedia
message. For further details, see page 72.
Set This Photo as: allows you to set the image as your
wallpaper for the idle screen or a caller icon image for an
incoming call.
Protection: allows you to set the protection to keep the
photo from being deleted.
Delete This: deletes the photo.
Delete All: deletes all of the photos saved in your phone.
When there is a protected photo, the display asks you if you
want to delete it. Press the Yes or No soft key.
Rename: allows you to change the name of the photo.
Edit: allows you to change the color tone or apply special
effects to the photo.
View Properties: shows the properties of the photo, such as
time and date it was saved, file size, photo size and quality,
protection status, file format and file name.
To change the view mode, press the right soft key, labeled
with the following modes:
Properties: shows the properties about the photo with the
thumbnail image.
2x2: show up to four thumbnail image on one screen.
3x3: shows up to nine thumbnail images on one screen.
Camera
104
Camera
105
MPEG
(Menu 3.3)
You can record a video that is currently displayed on the
camera screen and save it as a MPEG file. You can also view
the sample file stored in your phone.
Files (Menu 3.3.2)
When you access this menu, the video file list displays.
To play a video:
Record (Menu 3.3.1)
1. Select the video you want to view using the Up and Down
keys.
You can record up to ten videos.
2. To play the video file, press the Play soft key.
When you want to use options, press the Options soft
key. For further details about the options, see below.
1. Choose quality for the video image and press the Select
soft key.
2. When the camera turns on, adjust the image by rotating
the camera module and aiming it at the subject.
• Use the Up and Down keys to adjust the brightness of
the image.
• Use the Left key, Small or Large soft key to adjust the
display size.
• Use the Volume keys on the left side of the phone to flip
the image vertically.
3. Press the
To
Press the
search backward through a file
Left key.
search forward through a file
Right key.
pause or play
Up key.
stop
Down key.
adjust the volume
Volume keys.
key or Record soft key to start recording.
4. When you are finished, press the Stop soft key.
Or, the phone automatically stops when the recording time
expires.
5. Press the left soft key.
6. Enter a name for the video, if necessary, press the C key
to clear the default name.
For further details about entering text, see page 43.
7. Press the OK soft key.
The video is saved and the display returns to Record
mode.
Camera
106
3.
When you press the Options soft key, you can use the
following options:
Send by MMS: allows you to send the photo as a multimedia
message. For further details, see page 72.
Protection: allows you to set the protection to keep the
video from being deleted.
Delete: deletes the current video file.
Delete All: deletes all of your video files. When there is a
protected video, the display asks you if you want to delete it.
Press the Yes or No soft key.
Camera
107
Rename: allows you to change the file name.
Sound Settings
View Properties: allows you to view information of the
video, such as the file name, the time and date the video was
recorded, protection status and file size.
You can use the Sound Settings feature to customize various
settings, such as the:
Sample File (Menu 3.3.3)
● sounds made when you press a key, receive a message,
This menu allows you to view the default video file. For
further details, see page 107.
Memory Status (Menu 3.4)
● ring melody, volume and type.
open/close the folder or switch your phone on/off.
● alert tone made every minute during a call, when you
make an error or when your call is connected to the
system.
You can check the amount of memory available for the
Camera feature.
Note: When the phone is in Silent mode (see page 29), you cannot
change the sound settings.
The display shows the total space, including the space used
for photos and videos and the space remaining.
Ring Tone
(Menu 4.1)
This menu allows you to select a ring melody.
You can choose between many different melodies. If you have
downloaded sounds from the Internet or the optional
EasyGPRS programme, you can use them in this menu.
Ring Volume
(Menu 4.2)
This menu allows you to adjust the ring volume to one of five
levels.
Use the Up and Down keys or the Volume keys on the left side
of the phone to increase or decrease the volume.
Camera
108
Sound Settings
109
Alert Type
(Menu 4.3)
This menu allows you to specify how you are to be informed
of incoming calls or the alarm settings.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
SMS Tonex: the phone uses one of several SMS tones.
The following options are available:
Light Only: the service light flashes; the phone neither rings
nor vibrates.
Melody: the phone rings using the selected ring tone or
melody in the Ring Tone menu (Menu 4.1); see page 109.
SMS-CB Tone (Menu 4.5.2)
The following options are available for alerting you to new cell
broadcast (CB) messages:
OFF: the phone does not use a CB tone.
Vibration: the phone vibrates but does not ring.
Light Only: the service light flashes.
Vibra+Melody: the phone first vibrates three times and then
starts ringing.
Vibration: the phone vibrates.
Keypad Tone
SMS-CB Tonex: the phone uses one of several CB tones.
(Menu 4.4)
Single Beep: the phone beeps once.
This menu allows you to select the tone that the phone
sounds when you press a key.
MMS Tone (Menu 4.5.3)
To turn the sound off, select Off.
The following options are available for alerting you to new
multimedia messages:
Message Tone
OFF: the phone does not use an MMS tone.
(Menu 4.5)
This menu allows you to select how the phone informs you
that a new message has been received.
Light Only: the service light flashes.
SMS Tone (Menu 4.5.1)
Single Beep: the phone beeps once.
The following options are available for alerting you to new
SMS messages:
MMS Tonex: the phone uses one of several MMS tones.
Vibration: the phone vibrates.
OFF: the phone does not use an SMS tone.
Light Only: the service light flashes.
Sound Settings
110
Sound Settings
111
Folder Tone
(Menu 4.6)
This menu allows you to select the tone that the phone
sounds when you open or close the folder.
Phone Settings
To turn the sound off, select Off.
Many different features of your phone can be customized to
suit your preferences. All of these features are accessed in the
Phone Settings menu.
Power On/Off
Infrared Activate
(Menu 4.7)
This menu allows you to select the melody that the phone
sounds when it is switched on and off.
To turn the sound off, select Off.
Extra Tones
(Menu 4.8)
You can customize additional tones used for the phone.
To turn a given tone
Press the
on
On soft key. A check mark displays in
front of the option.
off
Off soft key. The check mark no
longer displays.
The following options are available:
(Menu 5.1)
This feature allows you to send or receive data to or from
IrDA-compatible computers or phones through the infrared
port.
With PC (Menu 5.1.1)
To use an infrared connection, you must:
● configure and activate an IrDA-compliant infrared port on
your PC.
● activate the infrared feature on the phone; the IrDA icon
) appears on the top line of the display.
● align the IrDA port on the phone with the IrDA port on
your computer.
IrDA port
Error Tone: sets whether or not the phone informs you when
you make a mistake.
Minute Minder: sets whether or not the phone beeps every
minute during an outgoing call to keep you informed of the
length of your call.
Connect Tone: sets whether or not the phone beeps when
your call is connected to the system.
Sound Settings
112
IrDA port
The connection is ready for data transmission.
Phone Settings
113
If there is no communication between your phone and the
IrDA-compliant device within 30 seconds of activating the
feature, it is automatically deactivated.
Note: For optional performance, use an optional data link cable. You
can purchase one from your local Samsung dealer.
➂ Press the Options soft key.
The following options are available:
• Discard: deletes the data.
• Save: allows you to save the selected data in your
phone’s memory.
With other Phone (Menu 5.1.2)
④ Select Save and press the Select soft key.
Using the infrared connection, you can send or receive
Phonebook entries and calendar memos from another
compliant phone.
To save all of the data:
Note: If you receive a call while sending or receiving data, you can
either answer or reject the call without interrupting the IrDA
connection. But, picking up your phone may break the
connection between the phones, so use the ear-microphone to
answer the call.
➀ Press the Options soft key.
• The following options are available:
• Save All: allows you to save all data.
• Save All vCard: saves all the Phonebook entries from
the received data.
Receiving Data from Another Phone
• Save All vCalendar: saves all the calendar memos
from the received data.
1. Align the IrDA ports on both phones with each other.
• Discard All: deletes all of the data.
2. Activate the infrared feature on the phones. For this
phone, access the Infrared Activate menu (Menu 5.1)
and select With Other Phone.
• Discard All vCard: deletes all the Phonebook entries
from the received data.
The connection between the phones is established and
your phone receives data from the other phone. You can
receive up to 20 items in succession.
3. When the list of the received data displays, you have two
options:
To save an individual item:
➀ Select one on the list and press the Select soft key.
The display shows the Phonebook entry.
• Discard All vCalendar: deletes all the calendar
memos from the received data.
• Exit: exits the IrDA function. When the phone asks if
you want to delete the remaining data, press the Yes
or No soft key.
➁ Select a save option and press the Select soft key.
4. When FDN (Fixed Dial Number) mode is enabled on your
phone, enter the PIN and press the OK soft key.
For further details about the FDN mode, see page 123.
➁ Press the OK soft key.
Phone Settings
114
Phone Settings
115
5. Press the Save soft key.
The entries are saved.
Sending Your Phonebook
1. Align the IrDA ports on both phones with each other to
establish the IrDA connection.
The IrDA port of the other phone must be activated.
2. Access a Phonebook entry and press the Options soft key.
See page 37.
3. Press the Up or Down key to scroll to Send via IrDA and
press the Select soft key.
4. Highlight an option, Selected Data or All Data, using the
Up or Down key and press the Select soft key.
Your phone begins sending the data.
Sending a Calendar Memo
1. Align the IrDA ports on both phones with each other to
establish the IrDA connection.
The IrDA port of the other phone must be activated.
2. Access the Calendar menu (Menu 6.2) and select the
memo you want to send. See page 131.
3. Press the Options soft key and select Send via IrDA.
Your phone begins sending the memo.
Display Settings
(Menu 5.2)
In this menu, you can change various settings for the display
or backlight.
Wallpaper (Menu 5.2.1)
This menu allows you to change the background image or the
color of the text to be displayed in Idle mode.
The following options are available:
Wallpaper List: you can select a background image to be
displayed on the idle screen.
To change the background image:
1. Scroll through the list by pressing the Up or Down key.
You have various preset images available. You can also
select a blank background or any images downloaded from
the Internet and the optional EasyGPRS programme or
received in messages.
2. Press the Select soft key when the image you want
highlights.
3. When the image displays, press the Select soft key to
display it on the idle screen.
Text Display: you can specify whether or not the phone
displays the time and date.
Text Color: you can select the color of the text to be
displayed on the idle screen.
Menu Style (Menu 5.2.2)
This menu allows you to select the menu display style. You
can choose either Grid Style, Bar Style or Page Style.
Phone Settings
116
Phone Settings
117
Brightness (Menu 5.2.3)
Front LCD Display (Menu 5.2.7)
This menu allows you to adjust the brightness of the front or
main LCD to see it better in different lighting conditions.
This menu allows you to adapt the external display to your
preferences.
Adjust the brightness by using the Up and Down keys or the
and
keys.
Display Type: allows you to change the type of the external
display.
Back Light (Menu 5.2.4)
No Display: the display shows only the current time on a
digital clock.
You can select the length of time the backlight is on. The
backlight turns on when you press a key, open the folder or
receive a call or message and remains on for the specified
length of time.
Analog Clock: the display shows the current time both on
digital and analogue clocks.
Service Light (Menu 5.2.5)
Light Timer: allows you to select the length of time the
external display remains shows the date or analogue clock.
This menu allows you to select whether or not the service
light is used. It also allows you to select a clock in which it
flashes.
Greeting Message
Select one of the seven color settings. When the phone is
ready for use, the service light flashes in the chosen color.
If you do not wish to use the service light, select Off.
Date Display: the display shows the current time and date.
This menu allows you to set a greeting to be displayed briefly
when the phone is switched on.
To
Press the
clear the existing message
C key and hold it down until the
message is cleared.
enter a new message
appropriate alphanumeric keys.
Graphic Logo (Menu 5.2.6)
This menu allows you to display your service provider’s logo
instead of its name.
Off: the service provider’s name displays in Idle mode.
On: the service provider’s logo stored in your phone displays
in Idle mode; if no logo has been stored, the service
provider’s name displays.
Phone Settings
118
(Menu 5.3)
change the text input mode right soft key.
For further details about how to enter characters, see
page 43.
Phone Settings
119
Own Number
(Menu 5.4)
The following options are available:
This function is a memory aid, which you can use to check
your own phone numbers if you need to do so.
Disable: the phone connects directly to the network when
you switch it on.
You can:
Enable: you must enter the PIN each time the phone is
switched on.
● assign a name to each of your own phone numbers
registered on your SIM card.
● edit the names and numbers.
Change PIN (Menu 5.6.2)
Any changes made here do not in any way affect the actual
subscriber numbers on your SIM card.
This feature allows you to change your current PIN to a new
one, provided that the PIN Check feature is enabled. You must
enter the current PIN before you can specify a new one.
Language
Once you have entered a new PIN, you are asked to confirm it
by entering it again.
(Menu 5.5)
You can select a display language. When the language option
is set to Automatic, the language is automatically selected
according to the language of the SIM card used.
Security
(Menu 5.6)
The Security feature enables you to restrict the use of your
phone to others and the types of calls.
Various codes and passwords are used to protect features of
your phone. They are described in the following sections. Also
see pages 163-165.
Phone Lock (Menu 5.6.3)
When the Phone Lock feature is enabled, the phone is locked
and you must enter an 8-digit phone password each time the
phone is switched on.
The password is preset to “00000000” at the factory. To
change the phone password, see the Change Password
menu (Menu 5.6.4).
Once the correct password has been entered, you can use the
phone until you switch it off.
PIN Check (Menu 5.6.1)
The following options are available:
When the PIN Check feature is enabled, you must enter your
PIN each time you switch the phone on. Consequently, any
person who does not have your PIN cannot use your phone
without your approval.
Disable: you are not asked to enter the phone password
when you switch the phone on.
Enable: you are required to enter the phone password when
you switch the phone on.
Note: Before disabling the PIN Check feature, you must enter your
PIN.
Phone Settings
120
Phone Settings
121
Change Password (Menu 5.6.4)
SIM lock (Menu 5.6.6)
The Change Password feature allows you to change your
current phone password to a new one. You must enter the
current password before you can specify a new one.
When the SIM Lock feature is enabled, your phone only works
with the current SIM. You must enter the SIM lock code to use
a different SIM card.
The password is preset to “00000000” at the factory. Once
you have entered a new password, you are asked to confirm it
by entering it again.
Once you have entered the lock code, you are asked to
confirm it by entering it again.
Privacy (Menu 5.6.5)
To unlock the SIM, you must enter the SIM lock code.
FDN Mode (Menu 5.6.7)
Using this menu, you can lock your media contents, such as
multimedia messages, photos, videos, voice memos, images
and sounds. Once you have locked the contents, you must
enter the phone password to access the associated menus.
FDN (Fixed Dial Number) mode, if supported by your SIM
card, allows you to restrict your outgoing calls to a limited set
of phone numbers.
The following options are available:
To
Press the
select an item to lock
Up or Down key. To lock all of
the contents, select All.
place a check mark
Mark soft key.
remove a check mark
Unmark soft key.
lock the marked items
OK soft key.
Disable: you can call any number.
Enable: you can only call phone numbers stored in
Phonebook. You must enter your PIN2.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this
menu does not display.
Change PIN2 (Menu 5.6.8)
When the phone asks for the phone password, enter the
password and press the OK soft key.
Note: The password is preset to “00000000” at the factory. To change
this password, see page 122.
The Change PIN2 feature allows you to change your current
PIN2 to a new one. You must enter the current PIN2 before
you can specify a new one.
Once you have entered a new PIN2, you are asked to confirm
it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this
menu does not display.
Phone Settings
122
Phone Settings
123
Extra Settings
Short Cut
(Menu 5.7)
You can turn the automatic redialing or answering features on
or off.
To turn a feature
on
off
Mark soft key.
A check mark displays in front of
the option.
Unmark soft key.
The check mark no longer displays.
1. Select the key to be used as a shortcut key by pressing
the Up or Down key, and press the Select soft key.
2. Select the menu to be assigned to the key by pressing the
Up or Down key.
Note: To deactivate a shortcut key, select the None option.
3. Press the Select soft key to save the selection.
The following options are available:
Auto Redial: when this option is checked, the phone makes
up to ten attempts to redial a phone number after an
unsuccessful call.
Note: The interval between two attempts varies.
Active Folder: when this option is checked, you can simply
open the folder to answer a call.
When it is unchecked, you must press a key to answer a call,
depending on the setting of the Anykey Answer option. See
below.
Anykey Answer: when this option is checked, you can
answer an incoming call by pressing any key, except the
key and the Reject soft key. To reject the call, press the
key or the Reject soft key.
Phone Settings
124
The Navigation keys can be used as shortcut keys. In Idle
mode, they allow you to access specific menus directly.
To assign a shortcut to a key:
Press the
When this option is unchecked, you can only press the
or Accept soft key.
(Menu 5.8)
TTY Settings
(Menu 5.9)
TTY, a TDD or Text Telephone, is a telecommunications device
that allows people who are deaf or hard of hearing, or who
have speech or language disabilities, to communicate by
telephone. In this menu, you can enable your phone’s TTY
feature.
The following options are available:
Enable: allows you to communicate with other TTY users. You
can communicate with other TTY users by connecting certain
portable TTY terminal models to your phone using an optional
adapter.
Disable: does not allow you to communicate with other TTY
users.
key
Phone Settings
125
Reset Settings
(Menu 5.10)
You can easily reset your phone to its default settings. To
reset your phone:
1. Select the Reset Settings menu.
Organizer
The Organizer feature enables you to:
● set an alarm so that the phone rings at a specific time,
such as to remind you of an appointment.
2. Enter the 8-digit phone password and press the OK soft
key.
● view the calendar and organise your schedule.
Note: The password is preset to “00000000.” To change this
password, see page 122.
● define a list of things to do.
● set the current time and date.
● record voice memos.
● use the phone as a calculator for basic mathematical
equations or currency exchange operations.
Alarm
(Menu 6.1)
This feature allows you to:
● set the alarm to ring at a specific time.
● set the phone to switch on automatically and ring the
alarm even if the phone is switched off.
The following options are available:
Once Alarm: the alarm rings only once and is then
deactivated.
Daily Alarm: the alarm rings every day at the same time.
Morning Call: the alarm rings to wake you up in the
morning.
To set an alarm:
1. Choose the type of alarm to be set and press the Select
soft key.
Phone Settings
126
Organizer
127
2. Enter the time for the alarm to sound.
Note: Your phone is preset to use 12-hour format. To change the
format, see page 132.
If you want to use the alarm options, press the Options
soft key. The following options are available:
• Remove Alarm: deactivates the current alarm.
• Alarm Sound Set: allows you to select the alarm
melody.
Calendar
(Menu 6.2)
With the Calendar feature, you can:
● consult the calendar to check your memos.
● write memos to keep track of your schedule.
● set an alarm to act as a reminder, if necessary.
Consulting the Calendar
4. Select AM or PM and press the Select soft key.
When you select the Calendar menu (Menu 6.2), the
calendar displays with today’s date highlighted. The following
options are available when you press the Options soft key:
5. If you select Morning Call in step 1, choose the repeat
option, Monday to Friday or Monday to Saturday, and
press the Select soft key.
Search All: displays all of the memos, starting with the
oldest regardless of the day. To scroll through the memos,
press the Up or Down key.
To stop the alarm when it rings, press the Exit soft key.
Delete All: allows you to delete all of the memos. You are
asked to confirm your action.
3. Press the OK soft key.
Remove Alarm: deactivates all alarm settings.
Autopower: when this option is set to Enable, the alarm
rings at the specified time, even if the phone is switched off.
If the option is set to Disable and the phone is switched off at
the specified time, the alarm does not ring.
Go to Date: allows you to go to a specific date.
Exit: exits the Calendar feature and returns to Idle mode.
Writing a Memo
You can make up to 30 memos for one day.
To write or edit a memo on a specific date:
1. Select a date on the calendar, using the Navigation keys.
Note: To skip to the previous or next month, press the Volume
keys.
2. Press the Select soft key.
An empty memo screen displays allowing you to enter
your memo.
Organizer
128
Organizer
129
3. Enter your memo and then press the OK soft key.
Note: For further details about how to enter characters, see
page 43.
You are asked if you wish to set an alarm.
4. If you want an alarm to ring on the chosen day, press the
Yes soft key.
Otherwise, press the No soft key. The memo is saved.
5. If you pressed the Yes soft key, enter the time for the
alarm and press the OK soft key.
Note: Your phone is preset to use 12-hour format. To change the
format, see page 132.
You can also select the melody for the alarm by pressing
the Melody soft key.
Alarm: allows you to set an alarm to ring at a specified time
to remind you of the memo. If you set the alarm earlier, you
can change or delete it.
Delete: allows you to delete the memo.
Copy to: allows you to copy the memo to another date.
Move to: allows you to change the date of the memo.
Send via IrDA: allows you to send the memo to another
phone via the IrDA port. For further details, see page 116.
Time & Date
(Menu 6.3)
This menu allows you to change the current time and date
displayed. You can also find out what time it is in another part
of the world.
6. Select AM or PM and press the Select soft key.
The following options are available:
The color of the date on the calendar changes to green to
indicate that a memo exists for that date.
Set Time: allows you to enter the current time. You can
choose the time format in the Time Format menu (Menu
6.3.4).
Viewing a Memo
When you select a day for which a memo already exists on
the calendar, the latest memo for the day displays.
If more than one memo is stored, press the Up or Down key
to scroll to the previous or next memo.
Press the New soft key to add a new memo for the day.
You can use the following options by pressing the Options
soft key:
Edit: allows you to change the memo text.
Note: Before setting the time, you must specify your time zone, in the
World Time menu (Menu 6.3.3).
Set Date: allows you to enter the day, month and year.
World Time: allows you to find out what time it is in another
part of the world, using the Left and Right keys.
The screen shows the:
● city name.
● current date and time.
● time difference between the selected city and your city if
you have set the local time (see below for further details).
● city selected as your time zone.
Organizer
130
Organizer
131
To select your time zone:
Calculator
1. Select the city corresponding to your time zone by
pressing the Left or Right key one or more times.
With this feature, you can use the phone as a calculator. The
calculator provides basic arithmetic functions; addition,
subtraction, multiplication and division.
The local time and date display.
2. Press the Set soft key.
Time Format: allows you to change the time format to 24
Hours or 12 Hours.
Set Time from Network: allows you to receive time
information from your service provider’s network.
Manual: you need to manually set the time and date
according to the current time zone using the Set Time menu
(Menu 6.3.1).
Auto: the phone automatically updates the time and date
according to the current time zone using the network service.
Confirm First: the phone asks for a confirmation before the
update.
Note: Automatic updates of time and date does not change the time
you have set for alarm settings or calendar memos.
(Menu 6.4)
1. Enter the first number using the numeric keys.
Notes:
• To delete mistakes or clear the display, press the C key.
• To include a decimal point or a bracket, press the left soft key
until the symbol you want displays.
2. Press the right soft key until the arithmetic symbol you
want appears: + (addition), - (subtraction),
(multiplication), / (division).
3. Enter the second number.
4. To view the result, press the
key.
5. Repeat steps 1 to 4 as many times as required.
To Do List
(Menu 7.5)
This feature allows you to:
● enter a list of tasks to be done.
● assign a priority and a deadline to each task.
● sort the tasks by priority and status mark.
Creating the To Do List
1. Press the New soft key.
2. Enter the first task.
Note: For further details about how to enter characters, see
page 43.
3. Press the OK soft key.
Organizer
132
Organizer
133
4. Select a priority status of high, normal or low using the Up
and Down keys and press the Select soft key.
5. Enter your deadline and press the OK soft key.
If you do not want to set a deadline, press the Skip soft
key.
Editing the To Do List
When you select the To Do List menu (Menu 6.5), the
current contents display with the status mark. If the task has
been done, and priority;
for High,
for Normal and
for Low.
Action
Procedure
View the details for
a specific task
➀ Highlight the task.
➁ Press the View soft key.
➂ Scroll through the tasks using the Up
and Down keys, if necessary.
Change the status
of a specific task
Create a new task
Organizer
134
➀ Highlight the task.
➁ Press the
key to mark the task as
completed as of the current time and
date.
or
➀ Highlight the task.
➁ Press the Options soft key.
➂ Select the Mark option.
➃ Select the appropriate status (Done or
Undo).
➀ Press the Options soft key.
➁ Select the New option.
➂ Enter the text, priority and/or deadline
for the task.
Action
Procedure
Edit an existing task ➀ Highlight the task.
➁ Press the Options soft key.
➂ Select the Edit option.
➃ Change the text, priority and/or
deadline for the task.
Sort the existing
tasks by priority or
status
➀ Press the Options soft key.
➁ Select the Sort option.
➂ Select the sort criterion (High, Low,
Done or Undo).
Copy a task
➀ Highlight the task.
➁ Press the Options soft key.
➂ Select the Copy option.
➃ Change the text, priority and/or
deadline for the task.
Copy a task to the
calendar
➀ Highlight the task.
➁ Press the Options soft key.
➂ Select the Copy to Calendar option.
➃ Change the text and deadline for the
task and set the alarm.
Delete a task
➀ Highlight the task.
➁ Press the Options soft key.
➂ Select the Delete option.
Delete all tasks
➀ Press the Options soft key.
➁ Select the Delete All option.
➂ Confirm the deletion by pressing the OK
soft key.
Exit the To Do list
➀ Press the Options soft key.
➁ Select the Exit option.
Organizer
135
Voice Memo
(Menu 6.6)
You can record voice memos. After recording, you can send a
memo to other people using the Multimedia Message Service.
Record (Menu 6.6.1)
This menu allows you to record a new memo. When you select
this option, the display shows the 30-second timer.
1. To start recording, press the Record soft key.
2. Record a memo by speaking into the microphone.
3. When you press the Stop soft key, or if the recording time
expires, the following options display:
• Replay: plays back your memo.
• Re-record: discards the memo and enables you to
record another one.
• Save: allows you to save the memo.
• Quit: cancels your recording and exits the Record
menu.
4. To save the memo, choose Save from the options and
press the Select soft key.
5. Press the C key to clear the default name, if necessary,
and enter a name for the memo.
For further details about how to enter characters, see
page 43.
6. Press the OK soft key.
The memo is saved and then the display shows the memo
information.
Organizer
136
7. Press the Options soft key to use the following memo
options:
• Send: allows you to send the memo to other people by
using the MMS feature. Follow the procedure on
page 72.
• Rename: allows you to change the memo’s name.
• Delete: deletes the memo.
8. To exit, press the C or
key.
Memo List (Menu 6.6.2)
This menu shows your voice memo list. Scroll to a memo and
press the Options soft key. The following options are
available:
Play: plays the memo.
Send: allows you to send the memo to other people by using
the MMS feature. See page 72 for further details about
sending a message.
Rename: allows you to change the memo’s name.
Information: displays information about the memo, such as
the name, date when the memo was made, recording
duration and memory size.
Delete: deletes the memo.
Delete All (Menu 6.6.3)
In this menu, you can delete your voice memos.
When the confirming message appears, press the Yes soft
key. To cancel the deletion, press the No soft key.
Organizer
137
Memory Status (Menu 6.6.4)
You can check the amount of memory for voice memos.
The display shows you the total space, including used and
free space.
Currency Exchange
(Menu 6.7)
Using this menu, you can figure out currency conversions.
1. Enter the current exchange rate of your source currency
and press the OK soft key.
You can insert a decimal point by pressing the
key.
2. Enter the amount to convert and press the OK soft key.
The amount you entered and its equivalent value display.
3. Press the Exit soft key to exit the currency convertor.
Pims Sync
(Menu 6.8)
ired!
Data
Organizer
138
Network Services
These menu functions are network services. Please contact
your service provider to check their availability and subscribe
to them, if you wish.
Call Forwarding
(Menu 7.1)
This network service enables incoming calls to be rerouted to
the number that you specify.
Example: You may wish to forward your business calls to a
colleague while you are on holidays.
You can use the following options to forward voice calls and/or
data calls:
Forward Always: all calls are forwarded.
Busy: calls are forwarded when you are already on another
call.
No Reply: calls are forwarded when you do not answer the
phone.
Unreachable: calls are forwarded when you are not in an
area covered by your service provider.
Cancel All: all call forwarding options are canceled.
To set your call forwarding options:
1. Select a call forwarding option by pressing the Up or Down
key, and then press the Select soft key.
2. Select the type of calls, voice or data, by pressing the Up
or Down key, and then press the Select soft key.
The current status displays. If the option has already been
set, the number to which the calls are forwarded displays.
Network Services
139
All Incoming: calls cannot be received.
3.
To
Press the
activate call forwarding
Activate soft key.
Go to step 4.
change the number to be
called
Change soft key.
Go to step 4.
deactivate call forwarding
Remove soft key.
4. Enter the number to which the calls are to be forwarded
and press the OK soft key.
To enter an international code, press the 0 key until the +
sign displays.
Incoming while Abroad: calls cannot be received when you
are using your phone outside of your home service area.
Cancel All: all call barring settings are deactivated; calls can
be made and received normally.
To set your call barring options:
1. Select a call barring option by pressing the Up or Down
key, and then press the Select soft key.
2. Select the type of calls, voice or data, by pressing the Up
or Down key, and then press the Select soft key.
3. Press the Activate soft key to confirm your settings.
The phone sends your settings to the network and the
network’s acknowledgement displays.
4. Enter your call barring password supplied by your service
provider.
You can deactivate all call forwarding settings by selecting the
Cancel All option.
The phone sends your settings to the network and the
network’s acknowledgement displays.
Call Barring
To deactivate specific call barring settings:
(Menu 7.2)
The call barring network service allows you to restrict your
calls.
You can use the following options to restrict voice calls and/or
data calls:
All Outgoing: calls cannot be made.
International: international calls cannot be made.
International Except to Home: when abroad, calls can be
made only to numbers within the current country and to your
home country, which is the country where your home network
provider is located.
Network Services
140
1. Select the call barring option to be deactivated.
2. Select the type of calls to which this option applies.
3. Press the Deactivate soft key.
4. Enter your call barring password supplied by your service
provider.
The phone sends your settings to the network and the
network’s acknowledgement displays.
You can also deactivate all call barring settings by selecting
the Cancel All option.
Network Services
141
Change Barring Password: you can set and change the call
barring password obtained from your service provider using
this option. You must enter the current password before you
can specify a new one.
Once you have entered a new password, you are asked to
confirm it by entering it again.
Call Waiting
(Menu 7.3)
This network service informs you when someone is trying to
reach you during another call.
You can specify individual call waiting options for voice calls
and/or data calls.
To set your call waiting options:
1. Select the type of calls, voice or data, to which you want
to apply the call waiting option by pressing the Up or Down
key, and then press the Select soft key.
The screen informs you whether call waiting is activated or
deactivated.
2. You can activate or deactivate the call waiting feature as
necessary by using the Activate or Deactivate soft key
respectively.
Network Selection
(Menu 7.4)
The Network Selection feature enables you to automatically or
manually select the network used when roaming outside of
your home area.
Note: You can select a network other than your home network only if
there is a valid roaming agreement between them.
To automatically or manually select the network when
roaming:
1. When Network Selection displays,highlights and press
the Select soft key.
2. Press the Up or Down key until the appropriate option
highlights and then press the OK soft key.
If you select Automatic, you are connected to the first
available network when roaming.
If you select Manual, the phone scans for the available
networks. Go to step 3.
3. Press the Up or Down key until the network you want
highlights and then press the OK soft key.
You are connected to that network.
To return to the previous screen, press the Exit soft key.
You can also deactivate all call waiting settings by selecting
the Cancel All option.
Network Services
142
Network Services
143
Caller ID
(Menu 7.5)
You can prevent your phone number from being displayed on
the phone of the person being called.
Index List: lets you list, add or delete CUG index numbers.
The list of current CUG indexes appears. Add a new CUG
index as advised by your service provider or delete a group.
To
Press the
scroll through the
existing CUG indexes
Up or Down key.
The following options are available:
Default: the default setting provided by the network is used.
add a new CUG index
Hide Number: your number does not display on the other
person’s phone.
Options soft key, select the Add
option and enter the index.
delete a CUG index
Send Number: your number is sent each time you make a
call.
Options soft key and select the
Delete option.
activate a CUG index
Options soft key and select the
Activate option.
Note: Some networks do not allow the user to change this setting.
Closed User Group (CUG)
(Menu 7.6)
This network service allows incoming and outgoing calls to be
restricted to a selected user group. You can create up to ten
user groups.
For details about how to create and use a closed user group,
contact your service provider.
Example: A company lends SIM cards to its employees and
wants to restrict outgoing calls to members of the
same team.
Activating a Closed User Group
If you select the Closed User Group menu, you can enter
the CUG function. You can now access the following options
after pressing the Select soft key:
Network Services
144
Outside Access: lets you enable or disable calls to numbers
other than those in the Closed User Group. This feature
depends on the nature of your CUG subscription. Please check
with your service provider.
Default Group: you may set a default CUG with your service
provider. If you have done so, you can enable the Default
Group option on your phone. When making a call, you are
given the option of using your default CUG, instead of
selecting one from the list.
Deactivate: deactivates the CUG function. This menu
appears only when the default group is enabled or a CUG
index is selected.
Network Services
145
Band Selection
(Menu 7.7)
For the phone to make and receive phone calls, it must
register with one of the available networks. Your phone can
handle any of the following types of networks:
• GSM 1800
• Combined GSM 850/1900
The country where you purchased your phone determines the
default band that it uses. When you travel abroad, you must
remember to change to an appropriate band.
1. When Band Selection displays, press the Select soft key.
2. Press the Up or Down key until the appropriate option and
press the OK soft key.
3. When the display confirms the network band you selected,
press the Yes soft key.
To cancel the selection, press the No soft key.
When you select a new band, your phone displays a
confirmation message and then automatically searches for all
of the available networks. Your phone registers with a
preferred network within the band.
Funbox
The Funbox menu contains several fun options.
mMode
(Menu 8.1)
Your phone is equipped with a WAP (Wireless Application
Protocol) browser to allow you to access and navigate the
Wireless Web using your phone.
Home (Menu 8.1.1)
Selecting this menu connects the phone to the network and
loads the homepage of the Wireless Web service provider. You
can also press the
key in Idle mode.
The contents of the WAP Browser startup homepage depends
on your Wireless Web service provider. To scroll through the
screen, use the Up and Down keys.
Note: To access the startup homepage from any other screen in the
WAP browser, use the Home option. For further details about
the WAP Browser menus, see page 149.
Exiting the WAP Browser
To exit the browser at any time, simply press the
Network Services
146
key.
Funbox
147
Navigating the WAP Browser
To
Press the
scroll through and select
browser items
Up or Down key until the symbol
points to the item, and then press
the Select soft key to confirm the
selection.
select a numbered item
corresponding numeric key.
return to the previous
page
Back soft key or the C key.
return to the startup
homepage
key for more than two seconds
and select the Home option. For
further details about this option, see
page 149.
Selecting and Using Browser Menu Options
Various menu options are available when you are using the
WAP Browser to navigate the Wireless Web.
To access a menu option:
1. Press and hold the
key.
A menu list displays.
Entering Text in the WAP Browser
When you are prompted to enter text, the current text input
mode is indicated on the screen. To change the text input
mode, press the
key or more times.
The following modes are available:
Upper-case character mode (A): allows you to enter
upper-case English characters.
Lower-case character mode (a): allows you to enter lowercase English characters.
Note: You can also enter special characters in Upper-case or Lowercase Character mode. For details about available characters,
see page 47.
T9 mode (T9): allows you to enter English characters by
pressing one key per letter. In this mode, you can use only the
0 key to display alternative words. To change the case, press
the
key.
Funbox
148
Number mode (1): allows you to enter numbers.
2. Highlight a menu by pressing the Up or Down key.
3. Select an option by pressing the Select soft key.
4. If necessary, select a secondary option using the Up and
Down keys, and press the Select soft key to confirm.
Note: The menus may vary, depending on your version of the WAP
browser.
The following options are available:
Reload: reloads the current page.
Home: takes you back at any time to the home page of the
Wireless Web service provider.
Go to URL: allows you to manually enter the URL address of
a Web page. After entering an address, press the OK soft key
to go there directly.
Show URL: displays the URL address of the Web page to
which you are currently connected. It also enables you to set
the current site as the startup home page.
Funbox
149
To
Press the
set the current page as Option soft key and select the Save
your startup home page to Home option.
After saving favorite items, you can use the following options
by pressing the Options soft key:
Go To URL: takes you to the site.
Edit: allows you to edit the address and name.
set a bookmark for the
current page
Option soft key and select the Save
to Bookmark option.
Delete: deletes the address.
cancel your setting
Back soft key.
http:// (Menu 8.1.3)
Edit Home: allows you to change the startup home page
manually. Enter the URL and press the OK soft key. For
further details about entering text, see page 148.
Clear Cache: deletes the information stored in the cache,
which stores the most recently accessed Web pages.
Inbox: allows you to read messages received from the web
server.
Bookmarks (Menu 8.1.2)
This menu allows you to store the URL addresses of up to ten
of your favorite web sites. You can access this menu directly
by pressing and holding the
key while using the WAP
browser.
To store a URL address:
1. Select an empty location and press the Options soft key.
2. Enter the address and press the Enter soft key.
For further details about how to enter characters, see
page 43.
3. Enter a name for the favorite item and press the Enter
soft key.
Funbox
150
This menu allows you to manually enter the URL address of
the Web site that you wish to access.
For further details about how to enter characters, see
page 43.
Settings (Menu 8.1.4)
This menu allows you to set up five proxy servers for the WAP
browser. Contact your service provider for details about your
Settings options.
For each server, the following options are available:
Profile Name: enter a name that you wish to assign to the
HTTP proxy server.
Homepage URL: set the address of your startup homepage.
When the default homepage displays, you can delete it using
the C key and enter your own choice.
Security: select a data transmission mode. Choose Secure
to protect your data against unauthorized access; otherwise,
choose Non-Secure.
Bearer: select a bearer to be used for each type of network
address accessed; GPRS or Data.
The remaining options depend on the Bearer setting.
Funbox
151
When the bearer is set to GPRS:
Games
IP Address: enter the WAP gateway address required to
connect to the Internet.
You can download MIDlets (Java applications running on
mobile phones) from various sources using the WAP Browser
and store them in your phone.
User Name: enter the User ID required to connect to the
GPRS network.
Password: enter the password required to connect to the
GPRS network.
APN: enter the access point name used for the address of the
GPRS network gateway.
When the bearer is set to Data:
IP Address: enter the WAP gateway address required to
connect to the Internet.
Login Name: enter the PPP server login ID.
Password: enter the PPP server password.
Dial-up Number: enter the PPP server phone number.
(Menu 8.2)
When you access the Games menu, the list of the default
games appears.
Note: Java services may not be available depending upon the service
provider.
Downloading a New Game
You can download more games from the web site given by
your service provider using the New Games option.
Launching a MIDlet
Note: The procedure explained below is for the default games. For
downloaded games, the procedure may be different.
Data Call Type: select a data call type; Analogue or ISDN.
1. Scroll to the MIDlet you want on the Games list and press
the Launch soft key.
Note: The WAP browser settings may vary, depending on the service
provider. Contact your service provider for further details.
2. On the startup screen of the MIDlet, scroll to an option
using the Navigation keys.
Clear Cache (Menu 8.1.5)
You can clear the information stored in the cache, the phone’s
temporary memory which stores the most recently accessed
Web pages.
Press the Yes soft key to confirm the deletion. Otherwise,
press the No soft key.
The following options are available:
• START GAME: starts a new game.
• CONTINUE: allows you to continue the last game you
were playing.
• HIGH SCORE: shows the high score table. This option
may not be available for some games.
• HOW TO PLAY: shows how to play the game and the
key functions for the game.
• OPTION: allows you to switch the game sound on or off.
Funbox
152
Funbox
153
3. Press the
key to confirm your selection.
While you are playing a game, to
Press the
adjust the sound volume
Volume keys
stop the game and return to the
startup screen
C key.
exit the game
key.
Number mode (1): allows you to enter numbers.
Symbol mode: allows you to enter symbols. After
highlighting a symbol by pressing the Navigation keys, press
the
key to insert it.
T9 mode (T9): allows you to enter English characters by
pressing one key per letter. In this mode, you can change the
case by pressing the 0 key.
To change the text input mode, press the
appropriate indicator appears.
key until the
Viewing MIDlet Information
1. Scroll to the MIDlet you want and press the Info soft key.
The display shows information about the MIDlet, such as
the file size, application version and its vendor.
2. To scroll to other MIDlet information, press the Navigation
keys.
3. If you want to delete the MIDlet, press the Delete soft key
and then press the Yes soft key to confirm the deletion.
4. To exit and return to the Games list, press the Back soft
key or the C key.
Note: When you select the default games from the list, the Delete
option is not available, so that you cannot delete them.
Entering Text
Sounds
(Menu 8.3)
In this menu, you can view the list of sounds downloaded
from the web server or received in multimedia messages. You
can set the downloaded sounds as the current ring tone or
send them to other phones.
By pressing the Options soft key, you can use the following
options:
Rename: allows you to change the name of the sound.
Delete: deletes the sound.
Set as Ring Tone: sets the sound as your ring tone.
Using the mMode Downloads option on the sounds list, you
can access the web site provided by your service provider and
download new sounds.
If you need to enter text while using a MIDlet, you can use
the following input modes:
Upper-case character mode (A): allows you to enter
upper-case English characters.
Lower-case character mode (a): allows you to enter lowercase English characters.
Funbox
154
Funbox
155
Images
(Menu 8.4)
In this menu, you can view the list of pictures downloaded
from the web server or received in messages. You can set the
downloaded pictures as the current background image or
send them to other phones.
Delete All
(Menu 8.5)
This menu allows you to delete all of the downloaded items in
the Games, Sounds or Images folders. You can delete all of
the items at one time.
To
Press the
select a folder to clear
By pressing the Options soft key, you can use the following
options:
Up or Down key. To delete all of
your items, select All.
place a check mark
Mark soft key.
Rename: allows you to change the name of the image.
remove a check mark
Unmark soft key.
Delete: deletes the image.
delete the marked items
Delete soft key.
If you set a photo as your wallpaper, it displays as My_Photo
on the list.
Set as Wallpaper: sets the image as your wallpaper for the
idle screen.
Using the New Wallpapers option on the images list, you
can access the web site provided by your service provider and
download new images.
When a confirming message displays, press the Yes soft key
to confirm.
Memory Status
(Menu 8.6)
You can check the amount of the memory being used and the
memory remaining for games, sounds and images.
Games: the display shows the total, free and used space and
the number of games you downloaded.
Sounds & Images: the display shows the total, used and
free space, including each space used by sounds and images.
Funbox
156
Funbox
157
Solving Problems
If you are experiencing problems with your phone, perform
the following simple checks before contacting a service
professional. This may save you the time and expense of an
unnecessary service call.
When you switch your phone on, the following
messages may appear:
Insert SIM Card
● Check that the SIM card is correctly installed.
Phone Locked Enter Password
● The automatic locking function has been enabled. You
must enter the phone’s password before you can use the
phone.
Enter PIN
● You are using your phone for the first time. You must enter
the Personal Identification Number (PIN) supplied with the
SIM card.
● The PIN Check feature is enabled. Every time the phone is
switched on, the PIN has to be entered. To disable this
feature, use the PIN Check menu (Menu 6.6.1).
Enter PUK
● The PIN code was entered incorrectly three times in
succession and the phone is now blocked. Enter the PUK
supplied by your service provider.
Funbox
158
Solving Problems
159
“No service,” “Network failure” or “Not done”
displays
● The network connection was lost. You may be in a weak
signal area (in a tunnel or surrounded by buildings). Move
and try again.
● You are trying to access an option for which you have not
taken out a subscription with your service provider.
Contact the service provider for further details.
You have entered a number but it was not dialed
● Have you pressed the
The audio quality of the call is poor
● Check the signal strength indicator on the display (
);
the number of bars indicates the signal strength from
strong (
) to weak ( ).
● Try moving the phone slightly or moving closer to a
window if you are in a building.
No number is dialed when you recall a
Phonebook entry
● Check that the number has been stored correctly, by using
the Phonebook Search feature.
key?
● Are you accessing the right cellular network?
● Re-store the number, if necessary.
● You may have set an outgoing call barring option.
Your correspondent cannot reach you
● Is your phone switched on (the
key pressed for more
than one second)?
● Are you accessing the right cellular network?
Your correspondent cannot hear you speaking
If the above guidelines do not help you to solve the
problem, take note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung after-sales service.
● Have you switched off the microphone?
● Are you holding the phone close enough to your mouth?
The microphone is located at the bottom of the phone.
The phone starts beeping and “**Warning** Low
Battery” flashes on the display
● Your battery is insufficiently charged. Recharge the
battery.
Solving Problems
160
Solving Problems
161
Access Codes
There are several access codes that are used by your phone
and its SIM card. These codes help you protect the phone
against unauthorized use.
When requested for any of the codes explained below, enter
the appropriate code (displayed as asterisks) and press the
OK soft key. If you make a mistake, press the C key one or
more times until the incorrect digit is cleared and then
continue entering the correct code.
The access codes, except for the PUK and PUK2 codes, can be
changed using the Security menu (Menu 5.6). See page 120
for further details.
Important! Avoid using access codes resembling emergency
numbers, such as 911, so that you do not
accidentally dial an emergency number.
Phone Password
The Phone Lock feature uses the phone password to protect
your phone against unauthorized use. The phone password is
supplied with the phone and is preset to “00000000” at the
factory.
Solving Problems
162
To
See
activate/deactivate the Phone
Lock feature
page 121 (Menu 5.6.3).
change the phone password
page 122 (Menu 5.6.4).
Access Codes
163
PIN
PIN2
The Personal Identification Number or PIN (4 to 8 digits)
protects your SIM card against unauthorized use. It is usually
supplied with the SIM card.
The PIN2 (4 to 8 digits), supplied with some SIM cards, is
required to access specific functions, such as setting the
maximum cost of a call. These functions are available if
supported by your SIM card.
If you enter an incorrect PIN three times in succession, the
code is disabled and cannot be used until you re-enable it by
entering the PUK (see below).
To
See
activate/deactivate the PIN
Check feature
page 120 (Menu 5.6.1).
change the PIN
page 121 (Menu 5.6.2).
PUK
If you enter an incorrect PIN2 three times in succession, the
code is disabled and you cannot access the functions until you
re-enable it by entering the PUK2.
To change the PIN2, see page 123 (Menu 5.6.7).
PUK2
The 8-digit PUK2 (PIN Unblocking Key 2), supplied with some
SIM cards, is required to change a disabled PIN2. If you lose
the code, contact your service provider.
The 8-digit PUK (PIN Unblocking Key) is required to change a
disabled PIN. The PUK may be supplied with the SIM card. If
not, or you have lost it, contact your service provider.
To re-enable your PIN2:
To re-enable your PIN:
2. Enter a new PIN2 of your choice and press the OK soft
key.
1. Enter the PUK and press the OK soft key.
2. Enter a new PIN of your choice and press the OK soft key.
3. When the Confirm New PIN message displays, enter the
same code again and press the OK soft key.
If you enter an incorrect PUK ten times in succession, the SIM
card becomes invalid. Contact your service provider for a new
card.
Access Codes
164
1. Enter the PUK2 and press the OK soft key.
3. When the Confirm PIN2 message displays, enter the
same code again and press the OK soft key.
If you enter an incorrect PUK2 ten times in succession, you
will not be able to access the functions requiring the PIN2.
Contact your service provider for a new card.
Access Codes
165
Health and Safety Information
Usage guidelines:
All about performance and safety
Getting the Most Out of Your Reception
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to
the signal strength icon. The more bars displayed, the
stronger the signal.
If you’re inside a building, being near a window may give you
better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically activated. If
your phone is active, it periodically rechecks service
availability or you can check it yourself by pressing any key.
Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your phone
returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When
it’s turned on, it receives and transmits radio frequency (RF)
signals. When you use your phone, the system handling your
call controls the power level. This power can range from 0.006
watts to 0.2 watts in digital mode.
Health and Safety Information
166
Knowing Radio Frequency Safety
The design of your phone complies with updated NCRP
standards described below.
In 1991-92, the Institute of Electrical and Electronics
Engineers (IEEE) and the American National Standards
Institute (ANSI) joined in updating ANSI’s 1982 standard for
safety levels with respect to human exposure to RF signals.
More than 120 scientists, engineers and physicians from
universities, government health agencies and industries
developed this updated standard after reviewing the available
body of research. In 1993, the Federal Communications
Commission (FCC) adopted this updated standard in a
regulation. In August 1996, the FCC adopted hybrid standard
consisting of the existing ANSI/IEEE standard and the
guidelines published by the National Council of Radiation
Protection and Measurements (NCRP).
Maintaining Your Phone’s Peak Performance
Note: For the best care of your phone, only authorized personnel
should service your phone and accessories. Faulty service may
void the warranty.
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
● Hold the phone with the antenna raised, fully-extended
and over your shoulder.
● Try not to hold, bend or twist the phone’s antenna.
● Don’t use the phone if the antenna is damaged.
● Speak directly into the phone’s receiver.
Health and Safety Information
167
Maintaining Safe Use of and Access to Your
Phone
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY
LEAD TO SERIOUS PERSONAL INJURY AND POSSIBLE
PROPERTY DAMAGE
● Dial 9,1,1 to report serious emergencies. It’s free from
your wireless phone.
● Use your phone to help others in emergencies.
● Call special non-emergency wireless number when
necessary.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
Following Safety Guidelines
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.
Note: Always turn off the phone in health care facilities and request
permission before using the phone near medical equipment.
FOR CONNECTION TO A SUPPLY NOT IN THE U.S.A., USE AN
ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET.
Using Your Phone While Driving
Talking on your phone while driving is illegal in some states.
Even where it’s not, it can divert your attention from driving.
Remember that safety always comes first.
When using your phone in the car:
● Get to know your phone and its features, such as speed
dial and redial.
● When available, use a hands-free device.
● Position your phone within easy reach.
● Let the person you are speaking to know you are driving; if
necessary, suspend the call in heavy traffic or hazardous
weather conditions.
● Do not take notes or look up phone numbers while driving.
● Dial sensibly and assess the traffic; if possible, place calls
when you stationary or before pulling into traffic.
● Do not engage in stressful or emotional conversations that
may divert your attention from the road.
Health and Safety Information
168
To operate your phone safely and efficiently, always follow any
special regulations in a given area. Turn your phone off in
areas where use is forbidden or when it may cause
interference or danger.
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, RF signals from wireless
phones may affect inadequately shielded electronic
equipment.
RF signals may affect improperly installed or inadequately
shielded electronic operating systems and/or entertainment
systems in motor vehicles. Check with the manufacturer or
their representative to determine if these systems are
adequately shielded from external RF signals. Also check with
the manufacturer regarding any equipment that has been
added to your vehicle.
Consult the manufacturer of any personal medical devices,
such as pacemakers and hearing aids, to determine if they
are adequately shielded from external RF signals.
Health and Safety Information
169
Turning Off Your Phone Before Flying
Restricting Children’s Access to your Phone
Turn off your phone before boarding any aircraft. To prevent
possible interference with aircraft systems, the U.S. Federal
Aviation Administration (FAA) regulations require you to have
permission from a crew member to use your phone while the
plane is on the ground. To prevent any risk of interference,
FCC regulations prohibit using your phone while the plane is
in the air.
Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others,
damage the phone or make calls that increase your phone
bill.
Turning Off Your Phone in Dangerous Areas
To avoid interfering with blasting operations, turn off your
phone when in a blasting area or in other areas with signs
indicating that two-way radios should be turned off.
Construction crews often use remote-control RF devices to set
off explosives.
Note: Never transport or store flammable gas, liquid or explosives in
the compartment of your vehicle that contains your phone or
accessories.
Turn off your phone when you’re in any area that has a
potentially explosive atmosphere. Although it’s rare, your
phone or its accessories could generate sparks. Sparks could
cause an explosion or a fire resulting in bodily injury or even
death. These areas are often, but not always, clearly marked.
They include:
● Fueling areas such as gas stations.
● Below deck on boats.
● Fuel or chemical transfer or storage facilities.
● Areas where the air contains chemicals or particles such as
Caring for the Battery
The guidelines listed below help you get the most out of your
battery’s performance.
● Use only Samsung-approved batteries and desktop
chargers. These chargers are designed to maximize
battery life. Using other batteries or chargers voids your
warranty and may cause damage.
● In order to avoid damage, charge the battery only in
temperatures that range from 32º F to 104º F
(0º C to 40º C).
● Don’t use the battery charger in direct sunlight or in high
humidity areas, such as the bathroom.
● Never dispose of the battery by incineration.
● Keep the metal contacts on top of the battery clean.
● Don’t attempt to disassemble or short-circuit the battery.
● The battery may need recharging if it has not been used
for a long period of time.
● It’s best to replace the battery when it no longer provides
acceptable performance. It can be recharged hundreds of
times before it needs replacing.
Don’t store the battery in high temperature areas for long
periods of time. It’s best to follow these storage rules:
Less than one month
32º F to 104º F (0º C to 40º C)
grain, dust or metal powders.
● Any other area where you would normally be advised to
turn off your vehicle’s engine.
Health and Safety Information
170
Health and Safety Information
171
Disposal of Lithium Ion (Li-Ion) Batteries
For safe disposal options of your Li-Ion batteries, contact your
nearest Samsung-authorized service center.
● For safety, do not handle a damaged or leaking Li-Ion
battery.
● Be sure to dispose of your battery properly. In some areas,
the disposal of batteries in household or business trash
may be prohibited.
Acknowledging Special Precautions and FCC
FCC Notice
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be
eliminated.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection
Standard (NFPA-58). For a copy of this standard, contact the
National Fire Protection Association, One Batterymarch Park,
Quincy, MA 02269, Attn: Publication Sales Division.
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting,
bending or sitting on it.
Body-Worn Operation
To maintain compliance with FCC RF exposure requirements, use only beltclips, holsters or similar accessories that maintain a 2.0 cm. separation
distance between the user's body and the back of the phone, including
the antenna. The use of belt-clips, holsters and similar accessories
should not contain metallic components in its assembly. The use of
accessories that do not satisfy these requirements may not comply
with FCC RF exposure requirements, and should be avoided
For more information about RF exposure, please visit the FCC
website at www.fcc.gov.
SAR Values
● Head: 1.16 (W/kg)
● Body-worn: 0.938 (W/kg)
● Distance: 1.5 (cm)
Cautions
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this
equipment. Only use approved batteries, antennas and
chargers. The use of any unauthorized accessories may be
dangerous and void the phone warranty if said accessories
cause damage or a defect to the phone.
Health and Safety Information
172
Health and Safety Information
173
FDA Consumer Update
● Support needed research into possible biological effects of
Do wireless phones pose a health hazard?
● Design wireless phones in a way that minimizes any RF
The available scientific evidence does not show that any
health problems are associated with using wireless phones.
There is no proof, however, that wireless phones are
absolutely safe. Wireless phones emit low levels of radio
frequency energy (RF) in the microwave range while being
used. They also emit very low levels of RF when in stand-by
mode. Whereas high levels of RF can produce health effects
(by heating tissue), exposure to low level RF that does not
produce heating effects causes no known adverse health
effects. Many studies of low level RF exposures have not
found any biological effects. Some studies have suggested
that some biological effects may occur, but such findings have
not been confirmed by additional research. In some cases,
other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
What is FDA’s role concerning the safety of
wireless phones?
Under the law, FDA does not review the safety of radiationemitting consumer products such as wireless phones before
they can be sold, as it does with new drugs or medical
devices. However, the agency has authority to take action if
wireless phones are shown to emit radio frequency energy
(RF) at a level that is hazardous to the user. In such a case,
FDA could require the manufacturers of wireless phones to
notify users of the health hazard and to repair, replace or
recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone industry
to take a number of steps, including the following:
Health and Safety Information
174
RF of the type emitted by wireless phones;
exposure to the user that it is not necessary for device
function; and
● Cooperate in providing users of wireless phones with the
best possible information on possible effects of wireless
phone use on human health.
FDA belongs to a interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
● National Institute for Occupational Safety and Health
● Environmental Protection Agency
● Federal Communications Committee
● Occupational Safety and Health Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities about wireless phones
with the Federal Communications Commission (FCC). All
phones that are sold in the United States must comply with
FCC safety guidelines that limit RF exposure. FCC relies on
FDA and other health agencies for safety questions about
wireless phones.
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at
higher power than do the wireless phones themselves, the
wireless exposures that people get from these base stations
are typically thousands of times lower than those they get
from wireless phones. Base stations are thus not the subject
of the safety questions discussed in this document.
Health and Safety Information
175
What kinds of phones are the subject of this
update?
The term “wireless phones” refers here to hand-held wireless
phones with built-in antennas, often called “cell,” “mobile,” or
“PCS”. These types of wireless phones can expose the user to
measurable radio frequency energy (RF) because of the short
distance between the phone and the user’s head. These RF
exposures are limited by Federal Communications
Commission safety guidelines that were developed with the
advice of FDA and other federal health and safety agencies.
When the phone is located at greater distances from the user,
the exposure to RF is drastically lower because a person’s RF
exposure decreases rapidly with increasing distance from the
source. The so-called “cordless phones” which have a base
unit connected to the phone wiring in a house, typically
operate at far lower per levels, and thus produce RF
exposures far below the FCC safety limits.
What are the results of the research done
already?
The research done thus far has produced conflicting results,
and many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of
radio frequency energy (RF) exposures characteristic of
wireless phones have yielded conflicting results that often
cannot be repeated in other laboratories. A few animal
studies, however, have suggested that low levels of RF could
Accelerate the development of cancer in laboratory animals.
However, many of the studies that showed increased tumor
development used animals that had been genetically
engineered or treated with cancer-causing chemicals so as to
be pre-disposed to develop cancer in absence of RF exposure.
Other studies exposed the animals to RF for up to 22 hours
per day. These conditions are not similar to the conditions
Health and Safety Information
176
under which people use wireless phones, so we don’t know
with certainty what results of such studies mean for human
health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glaucoma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland, leukemia, or
other cancers. None of the studies demonstrated the
existence of any harmful health effects from wireless phones
RF exposures. However, none of the studies can answer
questions about long-term exposures, since average period of
phone use in these studies was around three years.
What research is needed to decide whether RF
exposure from wireless phones poses a health
threat?
A combination of laboratory studies and epidemiological
studies of people actually using wireless phones would
provide some of the data that are needed. Lifetime animal
exposure studies could be completed in a few years. However,
very large numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one exists.
Epidemiological studies can provide data that is directly
applicable to human populations, but ten or more years’
follow-up may be needed to provide answers about some
health effects, such as cancer. This is because the interval
between the time of exposure to a cancer-causing agent and
the time tumors develop - if they do - may be many, many
years. The interpretation of epidemiological studies is
hampered by difficulties in measuring actual RF exposure
during day-to-day use of wireless phones. Many factors affect
this measurement, such as the angle at which the phone is
held, or which model of phone is used.
Health and Safety Information
177
What is FDA doing to find out more about the
possible health effects of wireless phone RF?
FDA is working with the U.S. Toxicology Program and with
groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radio frequency
energy (RF).
FDA has been a leading participant in the World Health
Organization International Electromagnetic Fields (EMF)
Project since its inception in 1996. An influential result of tis
work has been the development of a detailed agenda of
research needs that has driven the establishment of new
research programs around the world. The project has also
helped develop a series of public information documents on
EMF issues.
FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research and
Development Agreement (CRADA) to do research on wireless
phone safety. FDA provides the scientific oversight, obtaining
input from experts in government, industry, and academic
organizations. CTIA-funded research is conducted through
contracts to independent investigators. The initial research
will include both laboratory studies and studies of wireless
phone users. The CRADA will also include a broad assessment
of additional research needs in the context of the latest
research developments around the world.
Health and Safety Information
178
How can I find out how much radio frequency
energy exposure I can get by using my wireless
phone?
All phones sold in the United States must comply with Federal
Communications Commission (FCC) guidelines that limit radio
frequency energy (RF) exposures. FCC established these
guidelines in consultation with FDA and other federal health
and safety agencies. The FCC limit for exposure from wireless
telephones is set at a Specific Absorption Rate (SAR) of 1.6
watts per kilogram (1.6 W/kg). The FCC limit is consistent
with the safety standards developed by the Institute of
Electrical and Electronic Engineering (IEEE) and the National
Council on Radiation Protection and Measurement. The
exposure limit takes into consideration the body’s ability to
remove heat from the tissue that absorb energy from the
wireless phone and is set well below levels known to have
effects.
Manufacturers of wireless phones must report the RF
exposure level for each model of phone to the FCC. The FCC
website (http://www.fcc.gov/oet/rfsafety) gives directions for
locating the FCC identification number on your phone so you
can find your phone’s RF exposure level in the online listing.
What has FDA done to measure the radio
frequency energy coming from wireless phones?
The Institute of Electrical and Electronic Engineers (IEEE) is
developing a technical standard for measuring the radio
frequency energy (RF) exposure from wireless phones and
other wireless hand sets with the participation and leadership
of FDA scientists and engineers. The standard,
“Recommended Practice for Determining the Spatial-Peak
Specific Absorption Rate (SAR) in the Human Body Due to
Wireless Communications Devices: Experimental Techniques,”
Health and Safety Information
179
sets forth the first consistent test methodology for measuring
the rate at which RF is deposited in the heads of wireless
phone users. The test method uses a tissue-simulating model
of the human head. Standardized SAR test methodology is
expected to greatly improve the consistency of measurements
made at different laboratories on the same phone. SAR is the
measurement of the amount of energy absorbed in tissue,
either by the whole body or a small part of the body. It is
measured in watts/kg (or milliwatts/g) of matter. This
measurement is used to determine whether a wireless phone
complies with safety guidelines.
What steps can I take to reduce my exposure to
radio frequency energy from my wireless phone?
If there is a risk from these products--and at this point we do
not know that there is--it is probably very small. But if you
are concerned about avoiding even potential risks, you can
take a few simple steps to minimize your exposure to radio
frequency energy (RF). Since time is a key factor in how much
exposure a person receives, reducing the amount of time
spent using a wireless phone will reduce RF exposure.
If you must conduct extended conversations by wireless
phone every day, you could place more distance between your
body and the source of the RF, since the exposure level drops
off dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or
use a wireless phone connected to a
remote antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about RF
exposure from these products, you can use measures like
those described above to reduce your RF exposure from
wireless phone use.
Health and Safety Information
180
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you
want to take steps to lower exposure to radio frequency
energy (RF), the measured described above would apply to
children and teenagers using wireless phones. Reducing the
time of wireless phone use and increasing the distance
between the user and the RF source will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless
phones at all. For example, the government in the United
Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly precautionary; it
was not based on scientific evidence that any health hazard
exists.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason, FDA
helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones. This
test method is now part of a standard sponsored by the
Association for the Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by FDA, medical device
manufacturers, and many other groups, was completed on
late 2000. This standard will allow manufacturers to ensure
that cardiac pacemakers and defibrillators are safe from
wireless phone EMI.
Health and Safety Information
181
FDA has tested hearing aids for interference from handheld
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic
Engineers (IEEE). This standard specifies test methods and
performance requirements for hearing aids and wireless
phones so that no interference occurs when a person uses a
“compatible” phone and a “compatible” hearing aid at the
same time. This standard was approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmful interference be found to occur, FDA will conduct
testing to assess the interference and work to resolve
the problem.
CTIA Safety Information
Exposure to radio frequency signals
Your wireless hand held portable telephone is a low power
radio transmitter and receiver. When it is ON, it receives and
also sends out radio frequency (RF) signals.
In August, 1996, the Federal Communications Commissions
(FCC) adopted RF exposure guidelines with safety levels for
hand-held wireless phones. Those guidelines are consistent
with the safety standards previously set by both U.S. and
international standard bodies:
● ANSI C95.1 (1992)
Where can I find additional information?
● NCRP Report 86 (1986)
● For additional information, please refer to the following
● ICNIRP (1996)
resources:
● FDA web page on wireless phones
(http://www.fda.gov/cdrh/phones/index.html)
● Federal Communications Commission FCC) RF
Safety Program
(http://www.fda.gov/oet/rfsafety)
● International Commission on Non-Ionizing
Radiation Protection
(http://www.icnirp.de)
● World Health Organization (WHO) International
EMF Project
(http://www.who.int/emf)
● National Radiological Protection Board (UK)
Those standards were based on comprehensive and periodic
evaluations of the relevant scientific literature. For example,
over 120 scientists, engineers, and physicians from
universities, government health agencies, and industry
reviewed the available body of research to develop the ANSI
Standard (C95.1).
The design of your phone complies with the FCC guidelines
(and those standards).
Antenna care
Use only the specified of approved replacement antenna.
Unauthorized antennas, modifications, or attachments could
damage the phone and may violate FCC regulations.
(http://www.nrpb.org.uk)
Health and Safety Information
182
Health and Safety Information
183
Phone operation
Electronic devices
NORMAL POSITION: Hold the phone as you would any other
telephone with the antenna pointed up and over your
shoulder.
Most modern electronic equipment is shielded from RF
signals. However, certain electronic equipment may not be
shielded against RF signals from your wireless phone.
Tips on efficient operation:
Pacemakers
For your phone to operate most efficiently:
The Health Industry Manufacturers Association recommends
that a minimum separation of six (6”) inches be maintained
between a hand-held wireless phone and a pacemaker to
avoid potential interference with the pacemaker. These
recommendations are consistent with the independent
research by and recommendations of Wireless Technology
Research.
● Extend your antenna fully.
● Do not touch the antenna unnecessarily when the phone is
in use. Contact with the antenna affects call quality and
may cause the phone to operate at a higher power level
than otherwise needed.
Driving
Check the laws and regulations on the use of wireless
telephones in the areas where you drive. Always obey them.
Also, if using your phone while driving, please:
Persons with pacemakers:
● Should ALWAYS keep the phone more than six inches from
their pacemaker when the pacemaker is turned on;
● Should not carry the phone in a breast pocket;
● Give full attention to driving--driving safety is your
● Should use the ear opposite the pacemaker to minimize
● Use hands-free operation, if available.
● If you have any reason to suspect that interference is
first responsibility.
● Pull off the road and park before making or answering a
call if driving conditions so require.
the potential for interference.
taking place, turn your phone OFF immediately.
Hearing aids
Some digital wireless phones may interfere with some hearing
aids. In the event of such interference, you may want to
consult your service provider (or call the customer service line
to discuss alternatives.) Optional for each phone
manufacturer.
Health and Safety Information
184
Health and Safety Information
185
Other medical devices
Potentially explosive environments
If you use any other personal medical device, consult the
manufacturer of your device to determine if they are
adequately shielded from external RF energy. Your physician
may be able to assist you in obtaining this information.
Turn your phone OFF when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire resulting
in bodily injury of even death.
Turn your phone OFF in health care facilities when any
regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may be using equipment
that could be sensitive to external RF energy.
Areas with a potentially explosive atmosphere are often but
not always clearly marked. They include fueling areas such as
gasoline stations; below deck on boats; fuel or chemical
transfer or storage facilities; vehicles using liguefied
petroleum gas (such as propane or butane); areas where the
air contains chemicals or particles, such as grain, dust, or
metal powders; and any other area where you would normally
be advised to turn off your vehicle engine.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that
has been added to your vehicle.
Posted facilities
Turn your phone OFF in any facility where posted notices so
require.
Aircraft
FCC regulations prohibit using your phone while in the air.
Switch OFF your phone before boarding an aircraft.
Blasting areas
To avoid interfering with blasting operations, turn your phone
OFF when in a “blasting area” or in areas posted: “Turn off
two-way radio”. Obey all signs and instructions.
For vehicles equipped with an airbag
An airbag inflates with great force. DO NOT place objects,
including both installed or portable wireless equipment, in the
area over the air bag deployment area. If in-vehicle wireless
equipment is improperly installed and the air bag inflates,
serious injury could result.
Owner's Record
The model number, regulatory number and serial number are
located on a nameplate inside the battery compartment.
Record the serial number in the space provided below. This
will be helpful if you need to contact us about your phone in
the future.
Model: SGH-p716
Serial No.:
User Guide Proprietary Notice
T9 Text Input is licensed by Tegic Communications and is
covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S.
Pat. 6,011,554 and other patents pending.
Health and Safety Information
186
Health and Safety Information
187
STANDARD LIMITED
WARRANTY
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P. (SAMSUNG) warrants
to the original purchaser ("Purchaser") that SAMSUNG’s
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for
the period commencing upon the date of purchase and
continuing for the following specified period of time after that
date:
Phone
1 Year
Batteries
1 Year
Leather Case/Pouch
90 Days
Holster
90 Days
Other Phone Accessories
1 Year
What is Not Covered? This Limited Warranty is conditioned
upon proper use of Product by Purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting
from accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification of any
part of Product, including antenna, or cosmetic damage; (b)
equipment that has the serial number removed or made
illegible; (c) any plastic surfaces or other externally exposed
parts that are scratched or damaged due to normal use; (d)
malfunctions resulting from the use of Product in conjunction
with accessories, products, or ancillary/peripheral equipment
not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside
the United States or Canada.
STANDARD LIMITED WARRANTY
188
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and
this Limited Warranty does not cover any battery if (i) the
battery has been charged by a battery charger not specified
or approved by SAMSUNG for charging the battery, (ii) any of
the seals on the battery are broken or show evidence of
tampering, or (iii) the battery has been used in equipment
other than the SAMSUNG phone for which it is specified.
What are SAMSUNG’s Obligations? During the applicable
warranty period, SAMSUNG will repair or replace, at
SAMSUNG’s sole option, without charge to Purchaser, any
defective component part of Product. To obtain service under
this Limited Warranty, Purchaser must return Product to an
authorized phone service facility in an adequate container for
shipping, accompanied by Purchaser’s sales receipt or
comparable substitute proof of sale showing the date of
purchase, the serial number of Product and the sellers’ name
and address. To obtain assistance on where to deliver the
Product, call Samsung Customer Care at 1-888-987-4357.
Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG’s sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather
cases, pouches and holsters will be warranted for a period of
ninety (90) days. All other repaired/replaced Product will be
warranted for a period equal to the remainder of the original
Limited Warranty on the original Product or for 90 days,
whichever is longer. All replaced parts, components, boards
and equipment shall become the property of SAMSUNG. If
SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
STANDARD LIMITED WARRANTY
189
What Are the Limits On SAMSUNG’s Liability? EXCEPT AS
SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT “AS IS,” AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO:
•THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS
FOR ANY PARTICULAR PURPOSE OR USE;
•WARRANTIES OF TITLE OR NON-INFRINGEMENT;
•DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
•THE WORKMANSHIP OF THE PRODUCT OR THE
COMPONENTS CONTAINED THEREIN; OR
•COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS
OF ANY LAW, RULE, SPECIFICATION OR CONTRACT
PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL
BE CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY
KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL
IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE
BY OPERATION OF LAW, INCLUDING IF APPLICABLE THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE
SAME DURATION OF TIME AS THE EXPRESS WRITTEN
WARRANTY STATED HEREIN. SOME STATES/PROVINCES DO
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM
THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM
STANDARD LIMITED WARRANTY
190
THE USE OR LOSS OF USE OF THE PRODUCT OR FROM THE
BREACH OF THE EXPRESS WARRANTY, INCLUDING
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS,
OR FOR DAMAGES ARISING FROM ANY TORT (INCLUDING
NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT
COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR
FOR ANY BREACH OF CONTRACT OR FOR ANY CLAIM
BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY.
SOME STATES/PROVINCES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY
NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM
STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN
THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER’S EXCLUSIVE REMEDY. IF ANY PORTION OF
THIS LIMITED WARRANTY IS HELD ILLEGAL OR
UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL
ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED
WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND
WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS
OR AS LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION
WITH THE PRODUCT. SAMSUNG MAKES NO WARRANTIES OR
REPRESENTATIONS AND THERE ARE NO CONDITIONS,
EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO
THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE
OR SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR
EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED
STANDARD LIMITED WARRANTY
191
BY SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRDPARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE
PURCHASER AND THE DIRECT VENDOR, OWNER OR
SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG’s Product
pricing reflects this allocation of risk and the limitations of
liability contained in this Limited Warranty. The agents,
employees, distributors, and dealers of SAMSUNG are not
authorized to make modifications to this Limited Warranty, or
make additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer advertising
or presentation, whether oral or written, do not constitute
warranties by SAMSUNG and should not be relied upon.
Glossary
To help you understand the main technical terms and
abbreviations used in this booklet and take full advantage of
the features of your mobile phone, here are a few definitions:
Active Folder
Ability to answer a call simply by opening the folder.
Call Forwarding
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or making
another call; you can then switch between the two calls, as
required.
Call Waiting
Samsung Telecommunications America, L.P.
1130 East Arapaho Road
Richardson, Texas 75081
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
Informs you that you have an incoming call when you are
engaged on another call.
Caller Line Identification Services (Caller ID)
Services allowing subscribers to view or block the telephone
numbers of callers.
©2003 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior
written approval.
Specifications and availability subject to change without
notice. [080802]
STANDARD LIMITED WARRANTY
192
Glossary
193
EMS (Enhanced Message Service)
MMS (Multimedia Message Service)
An adaptation of the Short Message Service (SMS) that allows
you to send and receive ring tones and service provider’s
logo, as well as combinations of simple media to and from
EMS-compliant handsets. Because EMS is based on SMS, it
can use SMS centres the same way that SMS does. EMS
works on all Global System for Mobile communications (GSM)
networks. EMS senders can use text, melodies, pictures,
sounds, and animations to enhance the expressive power of
messages that are limited by the display constraints of mobile
devices.
A message service for the mobile environment, standardized
by the WAP Forum and the 3rd Generation Partnership
Program (3GPP). For phone users, MMS is similar to Short
Message Service (SMS)-it provides automatic, immediate
delivery of user-created content from phone to phone. The
message addressing used is primarily phone numbers, thus
the traffic goes from phone to phone. MMS also provides
support for e-mail addressing, so that messages can be sent
by e-mail. In addition to the text content of SMS, MMS
messages can contain still images, voice or audio clips, and
also video clips and presentation information.
GPRS (General Packet Radio Service)
New non-voice value-added service that allows information to
be sent and received across a mobile telephone network.
GPRS provides continuous connection to the Internet for
mobile phone and computer users. It is based on the Global
System for Mobile Communication (GSM) circuit-switched
cellular phone connections and the Short Message Service
(SMS).
GSM (Global System for Mobile Communication)
International standard for cellular communication,
guaranteeing compatibility between the various network
operators. GSM covers most European countries and many
other parts of the world.
Java
Multi-party Calling
Ability to establish a conference call involving up to five
additional parties.
Phone Password
Security code used to unlock the phone when you have
selected the option to lock it automatically each time it
switches on.
PIN (Personal Identification Number)
Security code that protects the phone against unauthorized
use. The PIN is supplied by the service provider with the SIM
card. It may be a four to eight-digit number and can be
changed, as required.
Programming language generating applications that can run
on all hardware platforms, whether small, medium or large,
without modification. It has been promoted for and geared
heavily to the Web, both for public Web sites and Intranets.
When a Java program runs from a Web page, it is called a
Java applet. When it is run on a mobile phone or pager, it is
called a MIDlet.
Glossary
194
Glossary
195
Proxy Server
SMS (Short Message Service)
A proxy server resides between a Web client, such as a web
browser, and a real Web server and acts as an intermediary
between them. When some people browse a web site, their
browser is not actually connecting to the web server. The
request from their browser goes to a proxy server, and the
proxy server makes the request to the web server. A proxy
server can improve performance for groups of users because
it cache the results of all requests for a certain amount of
time. If a user requests a web page that it already loaded for
another user, it reloads the page instead of forwarding the
request to the Web server, which can be a time-consuming
operation.
Network service sending and receiving messages to and from
another subscriber without having to speak to the
correspondent. The message created or received can be
displayed, received, edited or sent.
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an incorrect PIN
has been entered three times in succession. The eight-digit
number is supplied by the service provider with the SIM card.
Roaming
Use of your phone when you are outside your home area
(when travelling for example).
SIM (Subscriber Identification Module)
Card containing a chip with all the information required to
operate the phone (network and memory information, as well
as the subscriber’s personal data). The SIM card fits into a
small slot on the back of the phone and is protected by the
battery.
Glossary
196
Soft Keys
Two keys marked
which:
and
on the phone, the purpose of
● varies according to the function that you are currently
using.
● is indicated on the bottom line of the display just above the
corresponding key.
Tri Band
Ability to handle any of the following types of network; GSM
850, GSM 1800, combined GSM 850/ 1800 and GSM 1900
MHz bands, for greater call success and wider roaming.
Your phone automatically searches for the last network used.
If, for any reason, this network is unavailable, your phone will
attempt to register with a different network.
Voice Mail
Computerized answering service that automatically answers
your calls when you are not available, plays a greeting
(optionally in your own voice) and records a message.
Glossary
197
Index
Background image 117
Backlight
description 15
time 118
Band selection 146
Battery
charging 19
installing 18
low indicator 20
removing 17
Battery care 171
Broadcast messages 95
Call time 99
Caller groups
editing 39
searching 38
Caller ID 144
Calls
answering 26, 53
ending 23
forwarding 139
holding 49
making 23
redialing 24
rejecting 26
waiting 53, 142
Camera
options 103
playing videos 107
recording videos 106
taking photos 101
viewing photos 104
CB (Cell Broadcast) messages 95
Characters, enter 43
Charging battery 19
Conference call 53
Connect tone 112
Cost, calls 100
Currency exchange 138
Calculator 133
Calendar memos
copying 131
deleting 131
sending via IrDA 116
viewing 130
writing 129
Call back, message 68
Call cost 100
Call records
incoming 98
missed 27, 97
outgoing 98
Dangerous Areas 170
Date, set 131
Deleting
calendar memos 131
call records 97
e-mail message 83, 84
multimedia messages 77, 78
phonebook 37
photo 105
task 135
text messages 68, 70
video 107
voice memos 137
Access codes 163
Active folder 124
Alarm 127
Alert type 110
Alphabet mode, text input 47
Answering
call 26
second call 53
Anykey answer 124
Auto redial 124
198
Delivery reports, message 90
Display
backlight 15
external 15
icons 14
layout 13
settings 117
DTMF tones, send 51
Earpiece volume 25
E-mail messages
creating/sending 80
deleting 83, 84
reading 82, 84
setting 89
E-mail profile 94
EMS (Enhanced Message Service)
65
Error tone 112
External display 15
FCC Notice 172
FDN (Fixed Dial Number) mode
123
Flying 170
Folder tone 112
Forwarding
e-mail message 83
multimedia message 77
Forwardting, calls 139
Funbox 147
Games 153
Graphic logo 118
Greeting message 119
Health and safety 166
Holding, calls 49
Icons, description 14
Images, downloaded 156
Inbox, messages
e-mail 82
multimedia 75
text 68
Infrared, connect 113
International calls 23
Internet 147
Java service 153
Key volume 25
Keypad tones
selecting 110
sending 51
Keys
description 11
location 10
shortcut 125
Language, select 120
Last number, redial 24
Locking
media contents 122
phone 121
SIM card 123
Low battery indicator 20
Memory status
downloaded items 157
e-mail messages 89
phonebook 42
Menu style 117
Menus
accessing 57
list 58
199
Message tone 110
Messages
cell broadcast 95
e-mail 80
greeting 119
multimedia 71
text 65
MIDlets 153
Minute minder 112
Missed calls 27, 97
MMS (Multimedia Message Service)
71
Morning call 127
Multimedia messages
creating/sending 72
deleting 77, 78
editing 79
reading 75, 78
Multi-party calls 53
Muting
all sounds 50
key tones 51
microphone 50
Names
entering 43
searching/dialing 37
Network band, select 146
Network selection 143
Network services 139
Numbers, phone
searching/dialing 37
storing 33
On/off switch, phone 21
Organizer 127
Outbox, messages
e-mail 84
multimedia 78
text 69
Own number 120
Owner's Record 187
200
Password
call barring 142
phone 122, 163
Peak Performance 167
Phone
display 13
icons 14
keys 11
layout 10
locking 121
password 163
resetting 126
switching on/off 21
unpacking 9
Phone while driving 168
Phonebook
copying 37
deleting 37, 41
editing 36
options 36
searching/dialing 37
sending via IrDA 116
speed-dialing 40
storing 33
Photos
deleting 105
taking 101
viewing 104
PIMs Sync 138
PIN
changing 121
description 164
PIN2
changing 123
description 165
Power on/off tone 112
Power Save feature 166
Privacy 122
Problems, solve 159
PUK 164
PUK2 165
Radio Frequency 167
Received calls 98
Received messages
e-mail 82
multimedia 75
text 68
Reception 166
Recording
videos 106
voice memos 136
Redialing
automatically 124
manually 24
Resetting phone 126
Ring tone 109
Ring type 110
Ring volume 109
Roaming 143
Safe Use of and Access to Your
Phone 168
Safety
information 166
precautions 7
Schedule 129
Searching, phonebook 37
Security, calls 120
Sent messages
e-mail 84
multimedia 78
text 69
Service light 16, 118
Shortcut, menu 125
Silent mode 29
SIM card
installing 17
locking 123
SMS (Short Message Service)
inbox 68
outbox 69
Soft keys 31
Sound settings 109
Sounds, downloaded 155
Special Precautions 172
Speed-dialing 40
Switching on/off
microphone 50
phone 21
T9 mode, text input 45
Tasks, to do list
creating 133
editing 134
Templates
e-mail 85
multimedia 79
text 70
Text input mode 44
Text messages
creating/sending 65
deleting 68, 70
reading 68, 69
Text, enter 43
Time format 132
Time, set 131
To do list 133
Tone
connect 112
error 112
folder 112
keypad 110
message 110
minute minder 112
power on/off 112
ring 109
Travel adapter 19
TTY Settings 125
User Guide Proprietary Notice 187
201
V
Vibration 29, 110
Video
deleting 107
playing 107
recording 106
Voice memos
deleting 137
playing 137
recording 136
Voice server 88
Volume, adjust
earpiece 25
keypad tone 25
ring 109
Waiting call 142
Wallpaper 117
WAP browser
accessing 147
cache, clear 152
favorites 150
setting 151
World time 131
Writing messages
e-mail 80
multimedia 72
text 65
202
203
➄ Press the Select soft key.
Open the phone
or
Press the
key.
Press the
or
key on
the left side of the phone.
Answer a Call
Adjust the
Volume
key.
➀ Open the phone and
press the View soft
key.
➁ Scroll using the Up
and Down keys through
the missed calls.
➂ To return the call, press
the
key.
Briefly press the
End a Call
➂ Press the Select soft key.
View Missed
Calls
Immediately
After Missing
Them
➀ Enter the number.
➁ Press the
key.
Make a Call
➁ Scroll using the Up and
Down keys through the
list of the menus until you
reach the menu you want.
➃ Scroll using the Up and
Down keys through the
list of the options until the
one you want is selected.
Press and hold the
key.
Switch On/Off
➀ Press the Menu soft key.
• Each of the two soft keys (
and
) perform the function indicated by
the text above it on the bottom line in
the display.
Access the
Menu
Functions
Quick Reference Card
Tri Band SGH-P716 GPRS Telephone
Choose the
Alert Type
Store
Numbers in
the
Phonebook
➀ Select the Alert Type
menu option (Menu 4.3).
➁ Select an option:
• Light only
• Melody
• Vibration
• Vibra+Melody
➂ Press the Select soft key.
the Save soft key.
➀ Enter the name and press
➁ Select an icon.
➂ Press the Select soft key.
➃ Select a memory.
➄ Press the Select soft key.
➅ Enter the name.
➆ Press the OK soft key.
➇ If necessary, change the
location number.
➈ Press the OK soft key.
➉ Press the
key to
return to Idle Mode.
Take a
Photo
Search for a
Number in
the
Phonebook
➀ Press and hold the
key.
➁ Press the
key or Take
soft key.
➂ Press the Save soft key.
➃ Enter a name for the
photo.
➄ Press the OK soft key.
➀ Press the Ph.Book soft
key.
➁ Select the Search option.
➂ Enter the first few letters
of the name.
➃ To scroll through the
names, press the Up or
Down key.
➄ Press the View soft key.
➅ To scroll through the
numbers, press the Up or
Down key.
➆ Press the
key to dial.
204

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Create Date                     : 2004:04:22 00:09:36Z
Modify Date                     : 2004:04:27 12:18:08-03:00
Page Count                      : 109
Creation Date                   : 2004:04:22 00:09:36Z
Mod Date                        : 2004:04:27 12:18:08-03:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Metadata Date                   : 2004:04:27 12:18:08-03:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools