Download: Mirror Download [FCC.gov] Document ID 676056 Application ID pegumYHEQqMndu3Pb1r+1w== Document Description Users Manual Short Term Confidential No Permanent Confidential No Supercede No Document Type User Manual Display Format Adobe Acrobat PDF - pdf Filesize 86.58kB (1082241 bits) Date Submitted 2006-06-30 00:00:00 Date Available 2006-08-14 00:00:00 Creation Date 2006-06-30 13:40:11 Producing Software Acrobat Distiller 7.0 (Windows) Document Lastmod 2006-06-30 13:40:33 Document Title PowerPoint Ãâ€â€žÃ« ˆì Ã…Œì•´ì…˜ Document Creator PScript5.dll Version 5.2 Document Author: sec
* Depending on the software installed or your service provider or country,
some of the descriptions in this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear
different from the illustrations in this guide.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-XXXXXA
English. 06/2006. Rev. 1.0.
ersion
Draft v 6. 13
20
SGH-P908T
User’s Guide
Drive safely at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Switch off the phone when refuelling
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Use only Samsung-approved batteries and
accessories, such as headsets and PC data cables. Use
of any unauthorised accessories could damage you or
your phone and may be dangerous.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Important safety precautions
Be aware of special regulations
• The phone could explode if the battery is replaced with an
incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
At very high volumes, prolonged listening to a
headset can damage your hearing.
Emergency calls
Key in the emergency number for your present
location, then press
Qualified service
Keep your phone away from small children
Only qualified service personnel may repair your
phone.
Keep the phone and all its parts, including accessories,
out of the reach of small children.
For more detailed safety information, see "Health and
safety information" on page 103.
About this Guide
•
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful attention
to the subsequent information regarding safety
or phone features.
Indicates that you can get more information on
the referenced page.
→
Indicates that you need to press the Navigation
keys to scroll to the specified option and then
select it.
< >
Indicates a key on the phone. For example,
Indicates a soft key, whose function is displayed
on the phone screen. For example,
Digital Multimedia Broadcasting
(DMB)
Enjoy TV and radio broadcast via
T-DMB (Terrestrial Digital Multimedia
Broadcasting) services. Rotate your
phone’s screen and enjoy a large
horizontal view.
Special features of your phone
•
Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
•
Music player
Play MP3 files using your phone as a
music player.
•
•
Web browser
Access the wireless web to get upto-the-minute information and a
wide variety of media content.
File viewer
Open documents in various formats
on the phone without corruption.
•
Phone to TV
View photos and video clips
captured with the phone on your TV
screen.
•
Java
Enjoy Java™-based embedded
games and download new games.
•
Multimedia Message Service (MMS)
Send and receive MMS messages with a
combination of text, image, video, and audio.
•
E-mail
Send and receive e-mails with image, video, and
audio attachments.
Special features of your phone
•
Bluetooth
Transfer media files and personal
data and connect to other devices
using free, wireless Bluetooth
technology. You can also use a
Bluetooth stereo headset to enjoy
music with high quality stereo
sound.
Contents
Browse the web......................................................
Use Phonebook ......................................................
Send messages ......................................................
View messages.......................................................
Use Bluetooth ........................................................
Use a memory card.................................................
Watch the phone display on a TV ..............................
19
20
21
23
24
25
27
Keys, features, and locations
Enter text
28
Get started
Pinyin, PTI, Stroke, Quick English, English, Number, and
Symbol modes
Unpack
Make sure you have each item
Your phone
First steps to operating your phone
Install and charge the phone ..................................... 7
Power on or off........................................................ 9
Keys and display ..................................................... 9
Access menu functions ............................................ 12
Customise your phone............................................. 13
Make/Answer calls .................................................. 15
Step outside the phone
16
Begin with your T-DMB TV and radio, the camera, the music
player, the web, and other special features
Use the T-DMB feature ............................................ 16
Use the camera ...................................................... 17
Play music ............................................................. 18
Call functions
33
Advanced calling features
Menu functions
37
All menu options listed
Solve problems
101
Help and personal needs
Health and safety information
103
Overview of menu functions
To access Menu mode, press in Idle mode.
1 Call log
p. 37
3 Applications
p. 43
5 Messages
p. 59
p. 37
p. 38
p. 38
p. 38
p. 38
p. 38
p. 39
1 Mobile TVi
2 Music player
3 Voice recorder
4 Java world
5 World time
6 Alarm
7 Calculator
8 Converter
9 Timer
10 Stopwatch
11 Key management
12 SIM AT*
p. 43
p. 48
p. 51
p. 52
p. 53
p. 53
p. 54
p. 54
p. 55
p. 55
p. 55
p. 55
p. 60
p. 63
p. 68
p. 69
p. 69
p. 74
4 Browser
p. 56
p. 56
p. 57
p. 58
p. 58
p. 59
p. 59
p. 59
p. 59
Recent contacts
Missed calls
Dialled calls
Received calls
Delete all
Call time
Call cost*
2 Phonebook
p. 39
p. 39
p. 40
p. 41
p. 41
p. 42
p. 42
p. 42
p. 43
Contacts list
Add new contact
Group
Speed dial
My namecard
Own number
Management
Service number*
Home
Fun club
Enter URL
Bookmarks
Saved pages
History
Clear cache
Browser settings
Create message
My messages
Templates
Delete all
Settings
Memory status
6 File manager
p. 74
p. 74
p. 75
p. 77
p. 77
p. 78
p. 79
p. 79
Images
Videos
Music
Sounds
Other files
Memory card**
Memory status
7 Calendar
p. 79
8 Camera
p. 83
9 Settings
p. 88
1 Time and date
2 Phone settings
3 Display settings
4 Sound settings
5 Light settings
6 Network services
7 Bluetooth
8 Security
9 Connection settings
10 Reset settings
p. 89
p. 89
p. 90
p. 91
p. 92
p. 93
p. 96
p. 98
p. 99
p. 101
* Shows only if supported by your
SIM card.
** Shows only if a memory card is
inserted.
Unpack
Your phone
Make sure you have each item
Keys, features, and locations
Camera lens
Earpiece
TV antenna
Main display
Phone
Camera lens
DMB key
Battery
User’s Guide
You can obtain various accessories from
your local Samsung dealer.
The items supplied with your phone
and the accessories available at your
Samsung dealer may vary, depending
on your country or service provider.
Speaker
Travel Adapter
Web access/
Confirm key
Left soft key
Volume keys
Dial key
Alphanumeric
keys
Special
function keys
Camera key
Navigation
keys (Up/
Down/Left/
Right)
Right soft key
Power on/off/
Menu exit key
Delete key
Microphone
Headset jack
Music player
control keys
Memory card
slot
External
display
Wide view
To view the display as a wide view screen, simply
rotate the LCD compartment 90 degrees.
Get started
First steps to operating your phone
SIM card information
When you subscribe to a cellular network, you receive
a plug-in SIM (Subscriber Identity Module) card
loaded with your subscription details, such as your
PIN, and available optional services.
Install and charge the phone
Remove the battery
cover.
If the phone is already
on, first turn it off by
pressing and holding
[ ].
Insert the SIM card.
Make sure that the goldcoloured contacts on the
card are face down.
Get started
Install the battery.
Reattach the battery
cover.
When the phone is completely charged (the
battery icon becomes still), unplug the adapter
from the power outlet.
Remove the adapter from the phone.
Plug the travel adapter into the phone.
Low battery indicator
Plug the adapter into a standard AC wall outlet.
When the battery is low:
• a warning tone sounds,
• the low battery message displays, and
• the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
Power on or off
Switch on
Keys and display
Keys
1. Open the phone.
].
In Idle mode, press and hold the Mobile
TVi menu.
Do not turn on
the phone when
mobile phone
use is prohibited.
3. If necessary, enter the PIN and
press .
In Idle mode, press to turn on the
camera.
In camera mode, take a photo or record a
video.
Switch off
1. Open the phone.
Perform the function indicated on the
bottom line of the display.
2. Press and hold [
].
Get started
2. Press and hold [
In Idle mode, access your favourite
menus directly.p. 89
In Menu mode, scroll through menu
options.
In Idle mode, launch the web browser.
In Menu mode, select the highlighted
menu option or confirm input.
Get started
Make or answer a call.
In Idle mode, retrieve numbers recently
dialled, missed, or received.
Delete characters from the display or an
item in an application.
Press and hold to switch the phone on or
off.
End a call.
In Menu mode, cancel input and return
the phone to Idle mode.
Enter numbers, letters, and some special
characters.
In Idle mode, press and hold [1] to
access your voicemail server. Press and
hold [0] to enter an international call
prefix.
10
Enter special characters.
In Idle mode, press and hold [ ] to
activate or deactivate Silent mode. Press
and hold [ ] to enter a pause between
numbers.
Return to the previous file during
playback.
Press and hold to launch or close the
music player.
Pause or resume playing music.
Skip to the next file during playback.
Adjust the phone volume.
In Idle mode, with the phone open,
adjust the keypad tone volume. With the
phone closed, press and hold to turn on
the external display.
Display
Icons
Layout
Icons*
Contacts
Icons
display various icons.
Connected to a secured web page
Text and graphics
display messages,
instructions, and
information you enter.
Bluetooth activep. 96
Soft key function
indicators
show the current functions
assigned to the soft keys.
Received signal strength
GPRS network
Connecting to GPRS network
Call in progress
Out of your service area; you
cannot make or receive calls
Synchronised with PC
Get started
Menu
Connected to Internet
Connected to Bluetooth
hands-freeGcar kit or headset
Call diverting feature active
p. 93
Home Zone, if registered for the
appropriate service
Office Zone, if registered for the
appropriate service
Roaming network
New text message
New multimedia message
11
Get started
New e-mail
MP3 playback in progress
MP3 playback paused
Memory card insertedp. 26
Alarm setp. 53
Access menu functions
Use the soft
keys
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current role.
Select
Back
Silent mode (Vibration)
Silent mode (Mute)
Mute mode, during a call
Battery power level
* Depending on your country or service provider, the
icons shown on the display may vary.
Press the left
soft key to select
the highlighted
option.
12
Press the right
soft key to return
to the previous
menu level.
Select an
option
1. Press a desired soft key.
3. Press or [
] to
confirm the function displayed
or option highlighted.
4. To exit, choose either of the
following methods.
• Press to move up
one level.
• Press [ ] to return to Idle
mode.
Use shortcuts
Display
language
1. In Idle mode, press
and select Settings → Phone
settings → Language.
Get started
2. Press the Navigation keys to
move to the next or previous
option.
Customise your phone
2. Select a language.
Call ringer
melody
1. In Idle mode, press
and select Settings → Sound
settings → Incoming call →
Ringtone.
2. Select a ringtone category.
3. Select a ringtone.
4. Press .
Press the number key
corresponding to the option you
want.
13
Get started
Idle mode
wallpaper
You can set wallpaper for the idle
screen on the main display.
Menu
shortcuts
1. In Idle mode, press
and select Settings → Display
settings → Wallpaper → Main
display.
You can set the Navigation keys to
function as shortcuts to access
your favourite menus.
1. In Idle mode, press
and select Settings → Phone
settings → Shortcuts.
2. Select an image or a video
category.
2. Select a key.
3. Select a menu to be assigned to
the key.
3. Select an image or a video.
4. Press .
5. Press .
Menu mode
skin colour
You can change the colour for the
display components, such as title
bars and highlight bars.
1. In Idle mode, press
and select Settings → Display
settings → Skin.
2. Select a colour pattern.
14
Silent mode
You can switch the phone to Silent
mode to avoid disturbing other
people.
Press and hold [ ] in Idle mode.
Make/Answer calls
Phone lock
1. In Idle mode, press
and select Settings →
Security → Change
password.
Make a call
2. Press [
4. Enter the new password again
and press .
].
3. To end the call, press [
Answer a call
2. Enter the default password,
00000000, and press .
3. Enter a new 4- to 8-digit
password and press .
1. In Idle mode, enter an area
code and phone number.
].
1. When the phone rings, press
[ ].
2. To end the call, press [
Adjust the
volume during
a call
Get started
You can protect the phone against
unauthorised use with a phone
password. The phone will require
the password on power-up.
].
Press [ / ].
5. Select Phone lock.
6. Select Enable.
7. Enter the password and press
.
15
Step outside the phone
6. To move to the next or previous
channel, press [Left] or [Right].
Begin with your T-DMB TV and radio, the camera, the
music player, the web, and other special features
7. To stop the broadcast, press
[ ].
Use T-DMB services
Your phone enables you to view TV channels and listen
to radio stations via T-DMB (Terrestrial Digital
Multimedia Broadcasting) services, anytime anywhere.
Watch the
television
1. In Idle mode, rotate the
phone’s screen.
2. Pull the TV antenna out to
receive better broadcasting
signals.
3. Press and hold [TV].
4. Scroll to TV channels by
pressing [Left] or [Right].
5. Select the channel you want.
16
Listen to the
radio
1. In Idle mode, rotate the
phone’s screen.
2. Pull the TV antenna out to
receive better broadcasting
signals.
3. Press and hold [TV].
4. Scroll to Audio channels by
pressing [Left] or [Right].
5. Select the station you want.
6. To move to the next or previous
station, press [Left] or [Right].
7. To stop the broadcast, press
[ ].
Use the camera
View a photo
Take a photo
1. Open the phone.
] to turn
3. Aim the lens at the subject by
rotating the camera lens and
make any desired adjustments.
Step outside the phone
2. In Idle mode, press [
on the camera.
1. In Idle mode, press
and select File manager →
Images → Photos.
2. Select the photo you want.
Record a video
1. In Idle mode, press [
on the camera.
] to turn
2. Press [1] to switch to Record
mode.
3. Press [
] or [
recording.
4. Press [
] or [ ] to take a
photo. The photo is saved
automatically.
] to start
4. Press [ ] or < > to stop
recording. The video is saved
automatically.
5. Press <
video.
> to record another
5. Press to take
another photo.
17
Step outside the phone
Play a video
1. In Idle mode, press
and select File manager →
Videos → Video clips.
2. Select the video you want.
Play music
Copy music
files to the
phone
18
Use these methods:
•
Download from the wireless
webp. 56
•
Download from a computer
using the optional Samsung PC
StudioSamsung PC Studio
User’s Guide
•
•
Receive via Bluetoothp. 98
Copy to a memory card and
insert the card into the phone.
p. 25
Create a play
list
1. In Idle mode, press
and select Applications →
Music player.
2. Press and select
Add music from → Phone or
Memory card.
3. Press [
] to select the files
you want and press .
4. Press to return to the
music player screen.
Browse the web
Play music
files
1. From the music player screen,
press [
].
Launch the
web browser
In Idle mode, press [
Navigate the
web
•
To scroll through browser items,
press [Up] or [Down].
•
To select an item, press [
•
To return to the previous page,
press .
•
To move to the next page, press
and select Go →
Forward.
•
To access options, press
.
Step outside the phone
2. During playback, use the
following keys:
•
: pauses or resumes
playback.
• Left: return to the previous
file.
• Right: skips to the next file.
• Up: opens the play list.
•
/ : adjusts the volume.
• Down: stops playback.
Using a built-in web browser, you can easily access the
wireless web to get a variety of up-to-date services
and information and to download web content.
].
].
19
Step outside the phone
Use Phonebook
To the SIM card:
Add a contact
1. In Idle mode, enter a phone
number and press .
To the phone’s memory:
1. In Idle mode, enter a phone
number and press .
2. Select Save contact → SIM.
2. Select Save contact → Phone
→ a number type.
3. Specify contact information:
Last name, First name, Mobile,
Home, Office, Fax, Other, Email,
Caller ID, Ringtone, Group, and
Note.
4. Press to save the
contact.
3. Enter a name.
4. Press to save the
contact.
Find a contact
1. In Idle mode, press
.
2. Enter the first few letters of the
name you want.
3. Select a contact.
4. Scroll to a number and press
[ ] to dial, or press [
] to
edit contact information.
20
Send messages
1. In Idle mode, press
and select Phonebook → My
namecard.
2. Specify your contact
information.
1. In Idle mode, press
Send a text
and select Messages → Create
message (SMS)
message → Text message.
Step outside the phone
Create and
send a name
card
2. Enter the message text.
3. Press to save the
name card.
3. Press and select
Save and send or Send only.
4. To send the name card, press
and select Send
via → a sending method.
4. Enter destination numbers.
5. Press [
] to send the
message.
Send a
multimedia
message
(MMS)
1. In Idle mode, press
and select Messages → Create
message → Multimedia
message.
2. Select Subject.
3. Enter the message subject and
press [
].
21
Step outside the phone
4. Select Image and video or
Sound.
5. For Image and video, select
Add image or Add video and
add an image or video clip.
For Sound, select Add sound
and add a sound clip.
6. Select Message.
7. Enter the message text and
press [
].
22
Send an e-mail 1. In Idle mode, press
and select Messages → Create
message → Email.
2. Select Subject.
3. Enter the e-mail subject and
press [
].
4. Select Message.
5. Enter the e-mail text and press
].
6. Select File attached.
8. Press and select
Send.
7. Add image, video, sound, music
files, or document files.
9. Enter destination numbers or
addresses.
8. Press and select
Send.
10. Press [
] to send the
message.
9. Enter e-mail addresses.
10. Press [
] to send the e-mail.
View messages
From the Inbox:
1. In Idle mode, press
and select Messages → My
messages → Inbox.
When a notification appears:
1. Press .
2. Select the message from the
Inbox.
2. Select an MMS message (
From the Inbox:
1. In Idle mode, press
and select Messages → My
messages → Inbox.
2. Select an SMS message (
View a
multimedia
message
).
When a notification appears:
1. Press .
2. Press and select
Retrieve.
3. Select the message from the
Inbox.
View an e-mail
Step outside the phone
View a text
message
).
1. In Idle mode, press
and select Messages → My
messages → Email inbox.
2. Select an account.
3. Press to download new
e-mails or headers.
4. Select an e-mail or a header.
5. If you selected a header, press
and select
Retrieve to view the body of
the e-mail.
23
Step outside the phone
Use Bluetooth
3. Enter a Bluetooth PIN or the
other device’s Bluetooth PIN, if
it has one, and press .
When the owner of the other
device enters the same code,
pairing is complete.
Your phone is equipped with Bluetooth technology,
enabling you to connect the phone wirelessly to other
Bluetooth devices and exchange data with them, talk
hands-free, or control the phone remotely.
Turn on
Bluetooth
Search for and
pair with a
Bluetooth
device
24
1. In Idle mode, press
and select Settings →
Bluetooth → Activation → On.
2. Select My Phone’s Visibility →
On to allow other devices to
find your phone.
1. In Idle mode, press
and select Settings →
Bluetooth → My devices →
Search for new devices.
2. Select a device.
Send data
1. Access an application,
Phonebook, File manager, or
Calendar.
2. Scroll to an item.
3. Press and select
Send via → Bluetooth.
4. Select a device.
5. If necessary, enter the
Bluetooth PIN and press .
Receive data
If necessary, press to
confirm that you are willing to
receive.
Use a memory card
You can use an optional microSD memory card to
increase your phone’s memory capacity.
Important
memory card
information
• Frequent erasing and writing will
shorten a card’s lifespan.
• Do not remove a card from the
phone or turn off the phone
while data is being accessed or
transferred. This could result in
loss of data and/or damage to
the card or phone.
• Do not subject cards to strong
shocks.
• Do not touch card terminals with
your fingers or metal objects. If
dirty, wipe the card with a soft
cloth.
• Keep cards away from small
children or pets.
• Do not expose cards in a place
subject to electro-static
discharge and/or electrical
noise.
Step outside the phone
To receive data via Bluetooth, your
phone’s Bluetooth feature must be
active.
25
Step outside the phone
Insert a
memory card
1. Slide the card into the card slot,
with the label side face down.
Use a card
adapter
Using a card adapter and a USB
card reader/writer, you can read
the card on a PC.
1. Insert a memory card into a
card adapter, and then the
adapter into a card reader/
writer.
Remove the
memory card
2. Press the card until it locks into
place.
2. Plug the USB connector of the
card reader/writer into the USB
port on your PC.
1. Press the card so that it is
disengaged from the phone.
3. Access the appropriate memory
disk and copy to and from the
card.
2. Slide the card out of the slot.
26
Watch the phone display on a TV
Important TV
information
•
•
•
•
Depending on your particular
TV model, the location and
shape of the video input and
audio output ports may vary.
Match cable connector and TV
port colours.
Depending on the video
system, the image may vibrate
or in some other way be less
than optimal.
Depending on the video quality,
some video files may not
display.
You cannot use a Bluetooth
stereo headset or the zooming
feature in TV Out mode.
Transfer
phone display
to a TV
1. With the TV switched on,
connect your phone to the TV
with a TV out cable, as shown.
Step outside the phone
You can view the display of your phone on a TV screen
by connecting the phone and TV with a TV out cable.
This enables you to enjoy the photos, videos and
music stored in the phone’s memory with your family
or friends on a larger screen.
2. Switch the TV to External Input
mode.
The display switches to TV Out
mode and you can view the
phone’s display on the TV
screen.
3. If necessary, set the video
system for your TV in the
TV-out menu.p. 91
4. Access the application you want
and open files.
27
Using Chinese Pinyin mode
Enter text
Pinyin, PTI, Stroke, Quick English, English, Number, and
Symbol modes
You can enter text for some features, such as
Messages, Phonebook, or Calendar, by using Pinyin,
PTI, and Stroke modes for Chinese, and Quick English
and English modes for English. You can also enter
Korean, numbers, and symbols.
Changing the text input mode
•
Press the right soft key and select the text input
mode you want.
Pinyin (
PTI (
Chinese S Stroke (
Number (
Quick English (
•
28
Press and hold [
mode.
Chinese T Stroke (
Symbol (No indicator)
English (
] to quickly switch to Symbol
Pinyin is a system to enter Chinese words by spelling
them phonetically (how they sound) using the Latin
alphabet. With the Pinyin input method, you can enter
Chinese characters by keying in the Pinyin string using
the phone’s keypad.
Entering characters in Pinyin mode
1. Press the keys corresponding to the phonetic
spelling, referring to the letters printed on the
keys.
Example: To enter
, press [6] and [4] to enter
ni.
2. Press [Left] or [Right] to select alternative pinyins
for the keys you have pressed.
3. If you cannot find the character you want from the
display, press [Up] or [Down] to scroll through the
word choices.
4. Press [1] to activate the character selection field.
A number, from 1 to 5, is added to each character.
5. Press the number key corresponding to the
character you want.
Other Pinyin mode operations
• Press [ ] to insert a space.
• Press and hold [ ] to start a new line.
• Press [Left] or [Right] to move the cursor.
• Press [C] to clear letters one by one. Press and
hold [C] to clear the entire display.
Entering characters in PTI mode
Entering characters in PTI mode is basically the same
as in Pinyin mode except that you can enter phrases.
Refer to “Using Chinese Pinyin mode.”
Enter text
Rapid character entry
To enter the word zhong guo (
), enter the first
character using the following keystrokes; [9], [4],
[6], [6], [1], and [1]. You do not have to complete
the Pinyin spelling to include guo ( ). The character
displays automatically.
Adding words or phrases to the PTI dictionary
Once you have assigned words or phrases to the PTI
dictionary, the words or phrases will be the first
choices for the corresponding key presses.
1. Press and select Add new phrases to
add the word or the phrase you want to the PTI
dictionary.
2. Enter the word or the phrase you want.
3. Press to insert it into your text.
Using Phrasal Text Input mode
Phrasal Text Input (PTI) is an advanced Pinyin mode
which predicts not only words, but phrases for your
key presses. Using PTI mode, you can also add new
words or phrases to the PTI dictionary.
Using Chinese Stroke mode
This mode allows you to enter individual Chinese
strokes, in written order, from top to bottom, and from
left to right.
The Chinese strokes are classified into five basic
categories; heng, shu, pie, dian, and zhe. The basic
strokes are printed on keys [1] to [5] on the keypad.
29
Enter text
Refer to the following table:
Category
Key
Strokes represented in each category
2. Press [Up] or [Down] to scroll through the choices.
3. To select a character and add it to your message,
press the corresponding key, [7] to [ ].
Rapid character entry
Try entering the characters zhong guo (
) using the
following keystrokes: [2], [0], and [7]. Even though
zhong guo (
) is a twelve stroke character, your
phone allows you to enter the complete pair in only
three key presses.
Entering strokes and characters in Stroke
mode
1. Press the keys that correspond to a character’s
component strokes. Press keys in the order that
you would write the strokes, using one press per
stroke.
Example: To enter
, press [5] to enter
and
[3] to enter
If you are uncertain of the stroke order, press [6]
in place of each questionable stroke. Continue
entering strokes until the character displays or
until you finish the character.
30
Other Stroke mode operations
• Press [ ] to insert a space.
• Press and hold [ ] to start a new line.
• Press [Left] or [Right] to move the cursor.
• Press [C] to clear letters one by one. Press and
hold [C] to clear the entire display.
Using Quick English mode
Other Quick English mode operations
This mode allows you to enter English by using T9
technology. T9 is a predictive text input mode that
allows you to key in any character using single
keystrokes.
•
Enter text
Entering a word in Quick English mode
1. Press [2] to [9] to start entering a word. Press
each key once for each letter.
Example: Press [4], [3], [5], [5], and [6] to
enter Hello.
T9 predicts the word that you are typing, and it
may change with each key that you press.
2. Enter the whole word before editing or deleting the
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [0] to display alternative word
choices for the keys that you have pressed.
Example: Of and Me use [6] and [3].
4. Press [ ] to insert a space and enter the next
word.
•
•
•
•
Press [1] to enter periods or apostrophes
automatically.
Press [ ] to change case.
Press and hold [ ] to start a new line.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the entire display.
Adding a new word to the T9 dictionary
1. Enter the word that you want to add.
2. Press [0] to display alternative words for your keys
presses. When there are no more alternative
words, Add appears on the bottom line.
3. Press .
4. Enter the word you want using English mode and
press .
31
Enter text
Using English mode
Tips for using English mode
Press the appropriate key until the character you want
appears on the display.
•
Characters in order displayed
Key
Upper case
Lower case
. ,
- ? ! @ : ( ) / # _ ~ 1
A B C 2
b c 2
D E F 3
e f
G H I
h i
K L 5
k l
M N O 6
n o
q r
s 7
U V 8
W X Y Z 9
space + = < > C £ $ % & ¥ ¤ 0
S 7
w x y
z 9
•
•
•
•
•
•
To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
Press [ ] to insert a space.
Press and hold [ ] to start a new line.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Using Number mode
Number mode enables you to enter numbers.
Press the keys corresponding to the digits you want.
32
Using Symbol mode
Call functions
Symbol mode enables you to insert symbols.
Advanced calling features
Press
display more symbols
[Up] or [Down].
Making a call
select a symbol
the corresponding
number key.
1. In Idle mode, enter the area code and phone
number.
clear the entered symbols
[C].
insert the symbols
.
Call functions
To
• Press [C] to clear the last digit or press and
hold [C] to clear the whole display. You can
move the cursor to edit an incorrect digit.
• Press and hold [ ] to enter a pause between
numbers.
2. Press [ ].
3. When you want to end the call, press [
].
Making an international call
1. In Idle mode, press and hold [0]. The + character
appears.
2. Enter the country code, area code, and phone
number, then press [ ].
33
Redialling recent numbers
Answering a call
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press [ ].
When you receive an incoming call, the phone rings
and displays the incoming call image.
Making a call from Phonebook
Once you have stored a number in Phonebook, you
can dial the number by selecting it from
Phonebook.p. 39
You can also use the speed dial feature to assign your
most frequently dialled numbers to specific number
keys.p. 41
You can quickly dial a number from the SIM card using
its location number assigned when stored.
1. In Idle mode, enter a location number and press
[ ].
2. Press [Left] or [Right] to scroll through other
numbers.
3. Press or [ ] to dial the number you want.
34
Press or [
] to answer the call.
Tips for answering a call
•
•
•
•
When Anykey answer is active, you can press
any key, except for and [ ].p. 90
When Active flip is active, you can simply open
the phone.p. 90
Press or [ ] to reject a call.
Press and hold [ / ] to reject a call or mute the
ringer, depending on the Volume key setting.
p. 90
Viewing missed calls
If you have missed calls, the screen displays how
many calls you have missed.
1. Press .
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
Use the headset to make or answer calls without
holding the phone.
Connect the headset to the jack on the right side of
the phone. The button on the headset works as
follows:
Press
redial the last call
the button twice.
answer a call
the button.
end a call
the button.
Press to place a call on hold or press to
to retrieve the call.
Making a second call
You can make another call if your network supports
this function.
1. Press to put the call on hold.
2. Make the second call in the normal way.
3. Press to switch between the calls.
4. Press and select End held call to end
the call on hold.
5. To end the current call, press [ ].
Options during a call
Answering a second call
You can access a number of functions during a call.
You can answer an incoming call while already on the
phone, if your network supports this function and you
have activated the call waiting feature.p. 94
Adjusting the volume during a call
Call functions
Placing a call on hold/Retrieving
Using the headset
To
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
Use [ / ] to adjust the earpiece volume during a call.
35
Call functions
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press to switch between the calls.
3. Press and select End held call to end
the call on hold.
4. To end the current call, press [ ].
•
•
To communicate with answering machines or
computerised telephone systems, Send keys
must be selected.
Using the Speakerphone feature
Use the stereo speakers on the sides of the phone to
talk and listen with the phone a short distance away.
Press [
] and then to activate the
Speakerphone feature. Press [
] again to switch
back to the earpiece.
•
Using In-call options
Press to access the following options
during a call:
• Speaker on/Normal: turn on the Speakerphone
feature or switch back to Normal mode.
• Menu: access the phone's menu functions.
36
Voice on/Voice off: switch off the phone's
microphone so that the other person on the phone
cannot hear you, or switch it back on.
Mute keys/Send keys: switch the key tones on
or off.
•
•
•
Send DTMF: send the DTMF (Dual tone multifrequency) tones as a group. The DTMF tones are
the tones used in phones for tone dialling,
sounding when you press the number keys. This
option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
Contacts: access the contact list.
Stop playing TVi: stop the currently used DMB
services.
End held call: disconnect the call currently on
hold.
•
•
Menu functions
All menu options listed
Menu functions
•
Call log (Menu 1)
Use this menu to view the calls you have dialled,
received, or missed, and the length of the calls. You
can also check the cost of your calls,Gif your SIM card
supports this function.
Call log (Menu 1)
Transfer: transfer the currently active call to a
caller on hold. The two callers can talk to each
other, but you are disconnected from the call.
Join: set up a multi-party call by adding a caller
on hold to a currently active call. You can include
up to 5 people on a multi-party call.
Select one: select one of the multi-party call
participants. You can then use the following
options:
Private: have a private conversation with the
selected participant. The other participants can
converse with each other. After the private
conversation, select Join to return both private
participants to the multi-party call.
Remove: disconnect the selected participant.
To access this menu, press in Idle mode and
select Call log.
Recent contacts (Menu 1.1)
This menu displays the most recent calls dialled,
received, or missed.
Accessing a call log
1. Press [Left] or [Right] to move to another call
type.
2. Press [Up] or [Down] to scroll through the call list.
37
3. Press [
] to view the details of a call, or [
dial a number.
] to
Using call log options
While viewing call details, press to access
the following options:
• Call: edit the number and dial it.
• Save contact: save the number to Phonebook.
• Send message: send an SMS or MMS message to
the selected number.
• Delete: delete the selected call log or all logs.
This menu displays the most recent calls you have
received.
Delete all (Menu 1.5)
Use this menu to delete all of the logs in each call
type.
1. Press [
] to select the call types to be cleared.
2. Press .
3. Press to confirm the deletion.
Missed calls (Menu 1.2)
Call time (Menu 1.6)
This menu displays the most recent calls you did not
answer.
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
• Last call time: check the length of your last call.
• Total dialled calls: check the total length of all
the calls you have dialled.
• Total received calls: check the total length of all
the calls you have received.
Dialled calls (Menu 1.3)
This menu displays the most recent calls you have
dialled.
38
Received calls (Menu 1.4)
To reset the call timers, press and select
Reset selected or Reset all. You need to enter the
phone password.
Call cost (Menu 1.7)
Phonebook
(Menu 2)
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Phonebook.
To access this menu, press in Idle mode and
select Phonebook.
Phonebook (Menu 2)
This network feature displays the cost of calls. This
menu is available only if supported by your SIM card.
Note that this is not intended to be used for billing
purposes.
• Last call cost: check the cost of your last call.
• Total cost: check the total cost of all of your calls.
If the total cost exceeds the maximum cost set in
Set max. cost, you must reset the counter before
you can make another call.
• Max. cost: check the maximum cost limit set in
Set max. cost.
• Reset counters: reset the cost counters.
• Set max. cost: set the maximum cost authorised
for your calls.
Price/Unit: set the price per unit that is applied
when the cost of your calls is calculated.
Menu functions
The password is preset to 00000000. You can
change this password.p. 99
•
Contacts list (Menu 2.1)
Use this menu to search for numbers in Phonebook.
Finding a contact
1. Enter the first few letters of the name that you
want to find.
2. Select the name from the list.
3. Scroll to a number and press [ ] to dial, or press
] to edit contact information.
39
Menu functions
Using Phonebook options
While viewing contact details, press to
access the following options:
• Edit: edit contact information.
• Send message: send an SMS or MMS message to
the selected number, or an e-mail to the selected
address.
• Copy to: copy the contact to the phone’s memory
or to the SIM card.
• Send via: send the contact via SMS, MMS, e-mail,
or Bluetooth.
• Delete: delete the selected contact.
Add new contact (Menu 2.2)
Use this menu to add a new contact to Phonebook.
Storing a contact in the phone’s memory
1. Select Phone.
2. Change the settings or enter information about the
contact.
• Last name/First name: assign a name.
40
•
Mobile/Home/Office/Fax/Other: add a
number in any type.
• Email: assign an e-mail address.
• Caller ID: assign an image to alert you to a
call from the person.
• Ringtone: assign a ringtone to alert you to a
call from the person.
• Group: assign the number to a caller group.
• Note: add a note about the person.
3. Press to save the contact.
Storing a contact on the SIM card
1. Select SIM.
2. Enter information about the contact.
• Name: assign a name.
• Phone number: add a number.
• Location: assign a location number.
To assign a caller ID image, ringtone, or group,
the contact must be saved to the phone’s
memory.
3. Press to save the contact.
Group (Menu 2.3)
Use this menu to organise your contacts in caller
groups.
Press and select Add.
Enter a name for the group.
Select the caller ID line and set an image.
Select the ringtone line and set a melody.
Press to save the group.
Speed dial (Menu 2.4)
Use this menu to assign a speed dial number (2 to 9)
for 8 of your most frequently dialled numbers.
Adding members to a caller group
Assigning speed dial numbers
1.
2.
3.
4.
1. Select a key location from 2 to 9. Key 1 is reserved
for your voicemail server.
2. Select a contact from the contact list.
3. Select a number, if the contact has more than one
number.
Select a group.
Press .
Press [
] to select the contacts to be added.
Press and choose Select.
Managing caller groups
While viewing the group list, press to
access the following options:
• View: display the members of the selected group.
• Add: add a new group.
Phonebook (Menu 2)
1.
2.
3.
4.
5.
•
Edit: change the group properties.
Send message: send an SMS, MMS, or e-mail
message to the group members you want.
Delete: delete the selected group or all groups.
Group members, however, will not be deleted from
Phonebook.
Menu functions
Creating a caller group
•
•
Managing speed dial entries
From the Speed dial screen, press to
access the following options:
• Add: assign a number to an unassigned key.
41
Menu functions
•
•
•
View: check the name and number assigned to a
key.
Change: assign a different number to a key.
Remove: clear the speed dial setting for a key.
Dialling speed dial numbers
•
Exchange contact details: exchange name cards
with another person via Bluetooth.
Delete: delete the name card.
Own number (Menu 2.6)
My namecard (Menu 2.5)
Use this feature to check your phone numbers, or to
assign a name to each of the numbers. Changes made
here do not affect the actual subscriber numbers on
your SIM card.
Use this menu to create a name card and send it to
other people.
Management (Menu 2.7)
In Idle mode, press and hold the appropriate key.
Saving your name card
The procedure for creating your name card is the
same as the one for saving a phone number in the
phone’s memory.p. 40
Using name card options
After saving your name card, press to
access the following options:
• Edit: edit the name card.
• Send via: send the name card via SMS, MMS, email, or Bluetooth.
42
•
Use this menu to manage contacts in Phonebook.
• Saving location: select a default memory location
for saving contacts. If you select Ask on saving,
the phone will ask you to select a memory location
each time you save a number.
• Copy all to: copy all of the contacts stored on the
SIM card to the phone’s memory, or vice versa.
• Delete all: delete all of the contacts from your
phone’s memory, your SIM card, or both.
•
Memory status: check the number of contacts
you have stored in the phone’s memory and on the
SIM card.
You can enjoy optimal broadcast services while in the
area of a DMB transceiver.
Applications (Menu 3)
Use this menu to view the list of Service Dialling
Numbers (SDN) assigned by your service provider,
including emergency numbers and numbers for
directory enquiries. This menu is available if your SIM
card supports SDN.
1. Scroll to the number you want and press .
2. Press or [ ].
Using the Mobile TVi menu, you can enjoy various
DMB content via T-DMB (Terrestrial Digital Multimedia
Broadcasting) services. You can watch TV or listen to
the radio. While viewing or listening to a broadcast,
you can capture TV screen images, and record parts of
a radio broadcast. For further details about DMB
services, contact T-DMB broadcasting service provider.
Menu functions
Service number (Menu 2.8)
Mobile TVi (Menu 3.1)
Using the DMB services
You can enjoy TV channels and radio stations.
Applications
(Menu 3)
Use this menu to enjoy DMB services, play music files,
or play Java games. You can also use convenient
features, such as a voice recorder, alarm clock,
calculator, converter, timer, and stopwatch.
When provided with low bitrate by the service
provider, the quality of the broadcast may be poor. To
receive the best quality broadcast services, you need
to be in a service area with adequate signal strength.
This affects the recording quality of the broadcast.
To access this menu, press in Idle mode and
select Applications.
43
Menu functions
Watching television
1. In Idle mode, rotate the phone’s display.
You can best fit for the
viewing by adjusting
angle of the phone’s
head.
2. Pull out the TV antenna to receive better
broadcasting signals.
3. Press and hold [TV].
4. On the Mobile TVi screen, select TV channels
).
5. Scroll to the channel you want.
You can refresh channels by pressing
and selecting Update. The phone automatically
searches for available channels.
You can update the channel list by selecting
Update ( ) on the Mobile TVi screen.
6. Press and select Play.
44
7. Select Phone to use the phone speaker.
Select A/V headset to use a Bluetooth stereo
headset, and then search for and connect the
phone to the headset.
8. Use the following keys:
Key
Function
Left/Right
Moves to the previous or next
channel.
the left soft
key
Adjusts the volume.
Uses the broadcast options.p. 45
Opens the channel list.
Captures a still image. Records a
video file when held down. To stop
recording, press .
6. Press and select Play.
7. Select Phone to use the phone speaker.
Select A/V headset to use a Bluetooth stereo
headset, and then search for and connect the
phone to the headset.
Key
Function
Left/Right
Moves to the previous or next
station.
the left soft
key
Adjusts the volume.
Uses the broadcast options.next
section
Opens the station list.
Applications (Menu 3)
You can update the station list by selecting
Update ( ) on the Mobile TVi screen.
8. Use the following keys:
Menu functions
Listening to the radio
1. In Idle mode, rotate the phone’s display.
2. Pull out the TV antenna to receive broadcasting
signals.
3. Press and hold [TV].
4. On the Mobile TVi screen, select Audio channels
( ).
5. Scroll to the station you want.
You can refresh stations by pressing
and selecting Update. The phone searches for
available stations.
Records a sound clip when held
down. To stop recording, press
.
Using broadcast options
While viewing or listening to a broadcast, press the left
soft key to access the following options:
• Display channel list: open the TV channel or
radio station list.
45
Menu functions
•
•
•
•
•
•
•
•
Hide graphic guide/Show graphic guide: hide
or display the graphic guide, which includes
secondary status indicators, soft key indicators,
and controller image on the display while using
DMB services.
Transfer to stereo headset: switch the sound
output to a Bluetooth headset.
Go to My TVi files: access the My TVi files
folder.
Call: switch to the dialling screen.
Call log: access your recent call log list.
Create message: create and send a new SMS
message.
Phonebook: access the Contacts list menu.
Settings: customise the settings for using the
DMB service.p. 47
Saving DMB content
You can capture an image of a TV screen and a part of
a radio broadcast while viewing or listening to a
broadcast.
46
•
•
To capture a still image, press [ ].
To record a video file or sound clip, press and hold
[ ]. To stop recording, press or press
and hold [ ].
The files are automatically saved in the My TVi files
folder.
Accessing DMB content
After saving DMB content, you can access them in the
My TVi files folder.
Viewing an image
1. On the Mobile TVi screen, select My TVi files
( ).
2. Select Images.
3. Select an image file.
While viewing an image, press to access
the following options:
• List: return to the file list.
• Delete: delete the selected file or all files.
• Rename: change the file name.
•
•
Protection: protect the file from being deleted.
Details: access the file properties.
During playback, use the following keys:
Function
Pauses or resumes playback.
Left
Right
Down
Moves backward in a file.
Skips forward in a file.
Adjusts the volume.
Stops playback.
After playback, press to access the
following options:
• List: return to the file list.
Customising the DMB settings
You can customise the settings for using the Mobile TVi
services.
On the Mobile TVi screen, select Settings ( ).
• Graphic guide: set whether or not to display the
graphic guide, which includes secondary status
indicators, soft key indicators, and controller image
on the display while using DMB services.
Show and hide: the display shows the graphic
guide about 5 seconds after a key is pressed.
Always hide: the display does not show the
graphic guide.
Always show: the display always shows the
graphic guide.
Applications (Menu 3)
Key
Delete: delete the selected file or all files.
Rename: change the file name:
Protection: protect the file from being deleted.
Details: access the file properties.
Menu functions
Playing a video clip or sound clip
1. On the Mobile TVi screen, select My TVi files
( ).
2. Select Audio or Videos.
3. Select a sound clip or a video clip.
•
•
•
•
47
Menu functions
•
•
•
•
•
Memory status: check the amount of memory
being used for storing data, such as images,
audios, and videos.
Volume: select the volume level for broadcasts.
Brightness: adjust the image brightness for
viewing broadcast or saved content.
Search area: select your local zone(s) to search
for available DMB channels.
CAS Serial No.: view the CAS(Conditional Access
System) number.
Music player (Menu 3.2)
Use this menu to enjoy music. First, you need to save
music files into your phone’s memory or on a memory
card. To enjoy high quality music, you can use an
optional Bluetooth stereo headset.
Normal headsets and Bluetooth mono headsets are
not compatible with the music player.
Downloading or receiving music files
Your phone supports MP3, AAC, and M4A files. From
the memory card, you can only play MP3 files.
48
Use these methods to save music files to your phone’s
memory:
• Download from the wireless webp. 56
• Download from a computer using the optional
Samsung PC StudioSamsung PC Studio User’s
Guide
• Receive via an active Bluetooth connectionp. 98
• Copy to a memory card and insert the card into the
phone.p. 26
The downloaded or received files are stored in the
Music folder.p. 77
Creating a play list
1. From the music player screen, press
and select Add music from → Phone or Memory
card.
2. Press [
] to select the files to be added and
press .
3. Press to return to the music player
screen.
Playing music files
During playback, use the following keys:
Function
Left
Returns to the previous file. Moves
backward in a file when held down.
Right
Skips to the next file. Skips forward in a
file when held down.
Pauses or resumes playback.
Up
Opens the play list.
Down
Stops playback.
Adjusts the volume level.
Change the equaliser mode.
Function
Changes the playback animation.
Changes the repeat mode.
Changes the skin type.
Turns Shuffle mode on or off.
Using music player options
While playing a file, press to access the
following options:
• Play/Pause: begin or pause playback.
• Transfer to A/V headset/Transfer to Phone:
switch the sound output to a Bluetooth stereo
headset or phone speaker.
• Open: access the play list of the current album or
album list. On the album list, you can set up
multiple albums.
• Go to music: access the Music folder.
• Send via: send the file via e-mail or Bluetooth.
• Set as: set the file as your ringtone or as a
ringtone for a Phonebook entry.
Applications (Menu 3)
Key
Key
Menu functions
1. From the music player screen, press
and select Play.
2. Select Phone to use the phone speaker.
Select A/V headset to use a Bluetooth headset,
and then search for and connect the phone to the
headset.
49
Menu functions
•
•
•
•
•
50
Activate key: get a new licence key when the key
for the selected DRM files expires.
Remove from playlist: remove the selected file
from the play list.
Settings: change the default settings for playing
music files.
Repeat mode: select a repeat mode.
Shuffle: set the music player to play tracks in
random order.
MP3 overrides other sounds: set the music
player to continue playback even if you exit it.
Equaliser: select an equaliser mode.
Visualisation: change the playback animation.
Skin: select a skin type.
Volume: select a volume level.
Details: access the file properties.
Key management: manage the licence keys you
have acquired.
Accessing the play list
From the music player screen, press [Up].
Press to access the following options:
• Play: play the currently selected file.
• Add music from: add files to the play list.
• Go to album list: access the album list.
• Move to: move the selected file to another album.
• Copy to: copy the selected file to another album.
• Move track in playlist: move the selected file to
the position you want within the play list.
• Activate key: get a new licence key when the key
for the selected DRM file expires.
• Remove: remove the selected file or all files from
the play list.
• Details: access the file properties.
• Key management: manage the licence keys you
have acquired.
Playing MP3 files with the phone closed
Press and hold [ ] to launch the music player. Use
the following keys to control the music player:
Function
Begins or pauses playback. Closes the
music player when held down.
Returns to the previous file. Moves
backward in a file when held down.
Playing a voice memo
1. From the Voice recorder screen, press
and select Go to voice recorder files.
2. Select a voice memo.
During playback, use the following keys:
Key
Adjusts the volume.
Voice recorder (Menu 3.3)
Use this menu to record voice memos. A voice memo
can be up to one hour long.
Right
1. Press [
] to start recording.
2. Speak into the microphone.
Function
Pauses or resumes playback.
Left
Recording a voice memo
Applications (Menu 3)
Skips to the next file. Skips forward in a
file when held down.
Menu functions
Key
Press [
] to pause or resume recording.
3. Press or [Down] to end recording. The
voice memo is saved automatically.
4. Press [
] to review the voice memo, or [Up] to
record a new memo.
Moves backward in a memo.
Moves forward in a memo.
Adjusts the volume.
Down
Stops playback.
Up
Switch to Record mode (
mode ( ).
) or Review
51
Menu functions
Changing the recording mode
Using Java application options
You can change the recording mode of the voice
recorder. The maximum recording time is determined
by this setting. Before recording a memo, press
and select Settings → a recording mode:
• Limit for multimedia message: record a voice
memo for adding to an MMS message.
• Limit for email: record a voice memo for adding
to an e-mail.
• Maximum 1 hour: record a voice memo of up to
one hour.
From the application list, press to access
the following options:
• Start: launch the selected application.
• Move to: move the application to another folder.
• Delete: delete the selected application or all
applications, except for the embedded games.
• Protection: lock the application to protect it from
being deleted, or unlock the application.
• Details: access the application properties.
• Permissions: set permission settings for services
charging you additional costs, such as network
access and SMS.
• Upgrade: upgrade the application to the latest
version.
• Send information via SMS: send the URL
containing the application via SMS.
• Memory status: access memory information for
applications.
Java world (Menu 3.4)
Use this menu to access the embedded Java games
and downloaded Java applications.
Accessing an embedded game
1. Select My games → a game.
2. If necessary, press [
].
52
•
Settings: select a connection profile to be used for
applications requiring network access. You can also
create or edit a profile.p. 100
Use this menu to set your local time zone and find out
the current time in another part of the world.
Viewing world time
Applying daylight savings time
1. From the world map, press and select
Set daylight saving time.
2. Press [
] to select the time zones you want.
3. Press .
Setting an alarm
1. Select the type of alarm.
2. Set each alarm option:
• Alarm: activate the alarm.
• Alarm time: enter the time for the alarm to
ring.
• AM/PM: select AM or PM in 12-hour format.
• Repeat: select a repeat option.
• Alarm tone: select an alarm tone.
3. Press .
Stopping an alarm
•
•
For a non-wake-up alarm, press any key.
For a wake-up alarm, press or [
].
Press any key, except and [
], to
cause it to sound again after 5 minutes. You can do
this a maximum of 5 times.
53
Applications (Menu 3)
1. From the world map, press [Left] or [Right] to
scroll to the city you want. As the time line moves,
the time and date of the given zone display.
2. Press [
] to save the city as your local time
zone.
Use this menu to set alarms. The alert type for a
normal alarm corresponds to the call alert type
settings. A wake-up alarm is not affected by your
sound settings.
Menu functions
World time (Menu 3.5)
Alarm (Menu 3.6)
Menu functions
Deactivating an alarm
1. Select the alarm you want to deactivate.
2. Select Off on the Alarm line.
3. Press .
Setting alarms to sound when the phone is off
From the Alarm screen, select Auto power → On.
If the phone is off when it is time for the alarm to
sound, the phone switches on and sounds the alarm.
Calculator (Menu 3.7)
Use this menu to perform basic arithmetic functions,
such as addition, subtraction, multiplication, and
division.
1. Enter the first number.
• Press <.()> to insert a decimal point or
bracket.
• Press [ ] or [ ] to move the cursor.
2. Press one of the Navigation keys to access the
math function you want.
3. Enter the second number.
54
4. Press [
] to view the result.
5. If necessary, repeat from step 2 to continue the
calculation.
Converter (Menu 3.8)
Use this menu for common conversions, such as
currency and temperature.
1. Select a converter.
2. Press [Left] or [Right] to select the original unit
and press [Down].
3. Enter the value to be converted and press [Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to above
zero (+) or below zero (-).
4. Press [Left] or [Right] to select the unit to which
you want to convert.
The equivalent value for the amount you entered
displays.
For the currency converter, you can view and set
currency rates by pressing .
Use this menu to manage the licence keys you have
acquired to activate media contents locked by DRM
systems.
Starting the timer
Press to access the following options:
• View: open the corresponding media content.
• Delete: delete the selected licence key or all
licence keys.
• Go to my items: access the corresponding file
folder.
• Details: access the properties of the licence key.
1. Press .
2. Enter the length of time you want to count down
and press .
3. Press [
] to start counting down.
Stopping the timer
•
•
Press any key when the timer rings.
Press [
] on the Timer screen to stop the timer
before it rings.
Stopwatch (Menu 3.10)
Use this menu to measure elapsed time. The
maximum time is 10 hours.
1. Press [
] to start the stopwatch.
2. Press [
] to check an interval. You can repeat
this step for a total of 4 intervals.
Applications (Menu 3)
Key management (Menu 3.11)
Use this menu to set a period of time for the phone to
count down. The phone sounds an alarm when the
specified period of time expires.
Menu functions
Timer (Menu 3.9)
SIM AT (Menu 3.12)
This menu is available if you use a SIM AT card that
supports SIM Application Toolkit menus and provides
additional services, such as news, weather, sports,
entertainment, and location services. Available
services may vary depending on your service
provider’s plans. For details, see your SIM card
instructions or contact your service provider.
55
Menu functions
Browser
(Menu 4)
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
From the wireless web, you can access up-to-date
information and a wide variety of media content, such
as games, wallpapers, ringtones, and music files.
To access this menu, press in Idle mode and
select Browser.
Home (Menu 4.1)
Use this menu to connect your phone to the network
and load the homepage of the wireless web service
provider. You can also press [
] in Idle mode and
select Home.
Navigating the web
56
To
Press
scroll through browser
items
[Up] or [Down].
select a browser item
], or
and select Go to.
To
Press
return to the previous
page
, or
and select Go → Back.
move to the next page
and select Go
→ Forward.
Using page options
From any web page, press to access the
following options:
• Go to: access the linked web page.
• Go to homepage: return to the homepage.
• Keys to buy: send a request for buying a licence
key for a DRM file. This option will be available only
when you access the web browser from a message
containing a DRM file.
• Enter URL: enter a URL address manually.
• Go: move backward or forward through pages in
history.
• Reload: reload the current page with updated
information.
•
•
•
•
•
About browser: access version and copyright
information about the browser.
Exiting the browser
Menu functions
•
Press [ ] to end the network connection and exit the
browser.
Fun club (Menu 4.2)
Use this menu to access Samsung Fun Club, the preset
website providing Samsung mobile phone users with
attractive download services of updated ringtones and
wallpapers.
Browser (Menu 4)
Bookmarks: bookmark the current page or access
the bookmark list.
Send URL: send the URL of the current page via
SMS.
To SmartFit view/To Desktop view: change the
display mode of the browser.
Save: save the selected image or page.
Page details: access the page properties.
Browser options: change the various settings for
the browser.
Cache: change the cache mode or clear the cache.
The cache is a temporary memory that stores
recently accessed web pages.
Cookies: change the cookie acceptance mode or
delete cookies. Cookies are pieces of personal
information sent to a web server while navigating
the web.
Preferences: change the browser display and
sound settings.
Certificates: access certificate information.
You can download:
• colour images.
• 64 polyphonic melodies.
• information and electronic catalogues for Samsung
Electronics products.
57
Menu functions
SFC home (Menu 4.2.1)
Bookmarks (Menu 4.4)
Selecting this menu loads the Samsung Fun Club
homepage.
Use this menu to save URL addresses in order to
quickly access web pages.
When you access Samsung Fun Club for the first
time, please launch the web browser first, then
access Samsung Fun Club. This service requires WAP
subscription and may be unavailable depending on
your local system and services.
Service area (Menu 4.2.2)
Each time you move to China or HongKong, you need
to change this setting to use the SFC service,
according to the area where you are.
Enter URL (Menu 4.3)
Use this menu to manually enter a URL address and
access the associated web page.
You can add the entered URL to the bookmark list by
selecting Add bookmark.
58
Adding a bookmark
1. Press . If a bookmark has already been
saved, press and select Add
bookmark.
2. Enter a title for the bookmark and press [Down].
3. Enter a URL address and press .
Accessing a bookmarked page
Selecting a bookmark item launches the web browser
and accesses the associated web page.
Using bookmark options
On the Bookmarks screen, press to access
the following options:
• Go to: access the bookmarked web page.
• Go to homepage: access the homepage.
• Enter URL: enter a URL address manually.
• Edit bookmark: edit the URL address and title of
the bookmark.
•
•
•
•
Clear cache (Menu 4.7)
Use this menu to clear information stored in the cache,
a temporary memory that stores recently accessed
web pages.
Menu functions
•
Add bookmark: add a new bookmark.
Send URL: send the URL address of the bookmark
via SMS or e-mail.
Delete: delete the selected bookmark or all
bookmarks.
Add new phrases: add a new word to the PTI
dictionary.
Cancel: exit the Bookmarks menu.
Browser settings (Menu 4.8)
Use this menu to select a connection profile to be used
for accessing the wireless web. You can also create or
edit a profile.p. 100
You can access the list of pages you have saved while
online.
Messages
(Menu 5)
History (Menu 4.6)
Use the Messages menu to send and receive text
messages, multimedia messages, and e-mails. You
can also access push messages and Cell broadcast
messages.
You can access the list of pages you have accessed
recently.
To access this menu, press in Idle mode and
select Messages.
If you select a link on the page, the phone switches to
online to access the linked page.
Messages (Menu 5)
Saved pages (Menu 4.5)
Select a URL from the list to access the corresponding
web page.
59
Menu functions
Create message (Menu 5.1)
Using options while composing an SMS message
Use this menu to create and send messages.
While composing an SMS message, press
to access the following options:
• Save and send: save the message in Outbox and
then send it.
• Send only: just send the message.
• Insert: add a template, Phonebook entry, or
bookmark to text.
• Add image/Add animation/Add melody: attach
a simple image, an animated image, or a melody.
• Attach: attach a name card or calender data as a
data format attachment.
• Save to: save the message in another message
folder.
• Add new phrases: add a new word to the PTI
dictionary.
• Cancel: exit the Text message menu.
Text message (Menu 5.1.1)
Short Message Service (SMS) allows you to send or
receive text messages that may include simple
pictures, animated images, and melodies.
Creating and sending an SMS message
1. Enter your message and press [Centre].
• The maximum number of characters allowed
in a message varies by service provider. If
your message exceeds the maximum number
of characters, the phone will split the
message.
• You can use various options by pressing
in each field.next section
2. Enter a destination number.
To send the message to more than one recipient,
fill in additional destination fields.
3. Press [
] to send the message.
60
Multimedia message (Menu 5.1.2)
Creating and sending an MMS message
1. Select the Subject line.
You can use various options by pressing
in each field.next section
• The maximum size allowed for a message can
differ depending on your service provider.
• Depending on the file type or DRM (Digital
Rights Management) system, some files may
not be able to be forwarded.
5. Select the Sound line.
6. Select Add sound and add a sound clip.
7. Select the Message line.
Using options while composing an MMS message
While composing an MMS message, press
to access the following options:
• Add: add the message subject or message text.
• Add image/Add video/Add sound: add an
image, video clip, or sound clip.
• Add memory card: add a file stored on a memory
card, if inserted.
• Edit: edit the subject or text.
• Preview: view the message as it will be shown on
the recipient’s phone.
• View: open the selected attachment.
• Send: send the message.
Messages (Menu 5)
2. Enter the message subject and press [
].
3. Select the Image and video line.
4. Select Add image or Add video and add an
image or video clip.
8. Enter the message text and press [
].
9. When you have finished, press and
select Send.
10. Enter a phone number or an e-mail address.
To send the message to more than one recipient,
fill in additional destination fields.
11. Press [
] to send the message.
Menu functions
Multimedia Message Service (MMS) delivers messages
containing a combination of text, image, video, and
audio, from phone to phone or from phone to e-mail.
61
Menu functions
•
•
•
•
•
•
•
Save to: save the message in another message
folder.
Add page: add pages. Move to each page by
pressing [Left] or [Right].
Delete page: delete a page.
Edit page: change the duration of page display or
move the page forward among the other pages.
Attach: attach a Phonebook entry as a name card
or calender data as a data format attachment, or a
document file stored in the Other files folder.
Change image/Change video/Change sound:
replace an added item.
Remove subject/Remove message/Remove
media/Remove sound/Remove: remove an
added item.
Email (Menu 5.1.3)
You can create and send e-mails that include text,
audio, and images.
62
Creating and sending an e-mail
1. Select the Subject line.
You can use various options by pressing
in each field.next section
2.
3.
4.
5.
6.
Enter the subject of your e-mail and press [
].
Select the Message line.
Enter the e-mail text and press [
].
Select the File attached line.
Add media files, document files stored in the
Other files folder, or Phonebook entries as name
cards or calender data as data format
attachments.
Depending on the file type or DRM (Digital Rights
Management) system, some files may not be
able to be forwarded.
7. When you have finished, press and
select Send.
8. Enter an e-mail address.
To send the e-mail to more than one recipient, fill
in additional destination fields.
9. Press [
] to send the e-mail.
Using options while composing an e-mail
Remove all attachments: delete all
attachments.
My messages (Menu 5.2)
Menu functions
Use this menu to access messages you have received,
sent, or which have failed in sending.
Inbox (Menu 5.2.1)
This folder stores all of the messages you have
received, except for e-mails.
Messages (Menu 5)
While composing an e-mail, press to
access the following options:
• Add: add the subject of your e-mail or e-mail text.
• Edit: edit the subject or text.
• Add image/Add video/Add sound/Add music:
add media files stored in the phone’s memory.
• Other files: add document files stored in the
Other files folder.
• Memory card: add files stored on a memory card,
if inserted.
• Send: send the e-mail.
• Save to: save the message in another message
folder.
• Attach: attach Phonebook entries as name cards
or calender data as data format attachments.
• Remove subject/Remove message: clear the
subject or text.
• Remove attachment: delete the selected
attachment.
•
Viewing a message
The following icons may appear on the message list to
show the message type:
•
SMS
•
MMS
•
MMS notification ( : Being retrieved,
: Failed to retrieve)
•
Voicemail
•
Push message from web servers or
Configuration message, containing network
parameters from your service provider
63
Menu functions
•
•
CB (Cell broadcast) message from your
service provider
Delivery report for your sent messages
• Depending on the DRM (Digital Rights
Management) system, messages having web
content may not be able to be forwarded.
• A ! icon next to a message means that the
message is of high priority. A grey-coloured
message icon indicates low priority.
Using message options
While viewing a message, press to access
the following options:
SMS messages
• Reply via: reply to the sender via SMS or MMS.
• Forward: forward the message to other people.
• Delete: delete the message.
• Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
• Copy entry: extract URLs, e-mail addresses, or
phone numbers from the message.
64
•
•
•
Copy media: save media content from the
message to your phone’s memory.
Protection: protect the message from being
deleted. You can protect only those messages
stored in the phone’s memory.
Block number: add the sender’s number to the
Block list to reject the messages from the sender.
MMS messages
• Retrieve: retrieve the MMS message from the
MMS server.
• Reply via text message: reply to the sender via
SMS.
• Reply via multimedia message to: reply to the
sender via MMS.
• Forward: forward the message to other people.
• Delete: delete the message.
• Copy entry: extract URLs, e-mail addresses, or
phone numbers from the message.
• Copy media: save media content from the
message to your phone’s memory.
•
•
Protection: protect the message from being
deleted.
Details: access the message properties.
Drafts (Menu 5.2.2)
This folder stores messages you have saved to send at
a later time.
When you select a message, it opens in Edit mode so
that you can edit and send the message.
65
Messages (Menu 5)
Push messages
• Go to URL: connect to the URL specified in the
message.
• Copy entry: extract URLs, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
• Protection: protect the message from being
deleted.
Delivery reports
• Copy entry: extract URLs, e-mail addresses, or
phone numbers from the message.
• Delete: delete the report.
• Protection: protect the report from being deleted.
Menu functions
Configuration messages
• Install: apply the configuration specified in the
message to your phone.
• Delete: delete the message.
• Protection: protect the message from being
deleted.
CB messages
• Save: save the message to the phone’s memory.
• Copy entry: extract URLs, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
Menu functions
Outbox (Menu 5.2.3)
Sent messages (Menu 5.2.4)
This folder stores messages that the phone is
attempting to send or has failed to send.
This folder stores messages that you have sent.
The following icons are available to show the message
status:
•
Being sent
•
Failed to be sent
While viewing a message, press to access
the following options:
• Send again: retry sending the message.
• Forward: forward the message to other people.
• Copy entry: extract URLs, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
• Protection: protect the message from being
deleted.
• Details: access the message properties.
66
While viewing a message, press to access
the following options:
• Send: send the MMS message.
• Forward: forward the message to other people.
• Copy entry: extract URLs, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
• Protection: protect the message from being
deleted.
• Details: access the message properties.
Email inbox (Menu 5.2.5)
This folder stores e-mails that you have received.
Viewing an e-mail
1. Select an e-mail account.
2. Press when Check for new email
displays, or press and select Check
for new mail. The phone checks the e-mail server
and downloads new e-mails.
•
•
•
A ! icon next to a message means that the
message is of high priority. A grey-coloured
message icon indicates low priority.
•
Using e-mail options
While viewing the e-mail or header, press
to access the following options:
• Retrieve: retrieve the body of the e-mail from the
e-mail server.
• Reply: send a reply to the sender, or to the sender
and all of the other recipients.
•
•
•
My folders (Menu 5.2.6)
Use this menu to create new folders and organise your
messages.
Creating a new folder
1. Press .
2. Enter a folder name and press and
select OK.
67
Messages (Menu 5)
3. Select an e-mail or a header.
4. Press [Left] or [Right] to view other pages in the
e-mail.
5. Press [ ] or [ ] to view the previous or next
e-mail.
Forward: forward the e-mail to other people.
Delete: delete the e-mail.
Add to filtering list: add the sender’s e-mail
address or subject to the Block list to reject
e-mails from that address or containing that subject.
Copy entry: extract URLs, e-mail addresses, or
phone numbers from the e-mail.
Copy media: save the attached files from the
e-mail to your phone’s memory.
Protection: protect the e-mail from being deleted.
Details: access the e-mail properties.
Menu functions
The following icons may appear on the list to show
the e-mail status:
•
Retrieved from the server
•
Being retrieved
•
Failed to be retrieved
Menu functions
Using folder options
Using template options
On the folder list, press to access the
following options:
• Open: open the selected folder.
• Add folder: add a new folder.
• Rename folder: change the folder name.
• Delete: delete the selected folder.
From the template list, press to access
the following options:
• Edit: edit the selected template.
• Send message: send a new message.
• Delete: delete the selected template.
• Add new: add a new template.
Templates (Menu 5.3)
Multimedia message templates (Menu 5.3.2)
Use this menu to make and use templates of
frequently used messages or passages.
You can access embedded MMS templates or ones you
have saved so that you can use them when composing
an MMS message.
Text templates (Menu 5.3.1)
You can create SMS templates with the sentences you
use frequently so that you can retrieve and insert
them when composing an SMS message.
Creating a template
1. Select an empty location.
2. Enter a message and press and select
OK.
68
From the template list, press to access
the following options:
• View: open the selected template.
• Edit: edit the template.
• Send: send the selected template.
• Delete: delete the selected template or all
templates, except for the embedded ones.
Delete all (Menu 5.4)
Use this menu to set up various options for using the
messaging service.
Text message (Menu 5.5.1)
You can configure SMS settings.
• Send settings: set up the options for sending
SMS messages:
•
•
Messages (Menu 5)
Settings (Menu 5.5)
•
Reply path: allow recipients to reply to you
through your SMS server.
Delivery report: set the network to inform you
when your messages have been delivered.
Bearer selection: select either GSM or GPRS
preferred, depending on your network.
Block number: store the phone numbers from
which you want to reject messages.
Current profile: check or select an SMS setting
profile.
Profile settings: set the properties of each
profile.
Service centre: store or change the number of
your SMS server.
Default destination: enter the default
destination. It will be automatically entered on the
recipient list.
Default type: set the default message type. The
network can convert the messages into the
selected format.
Menu functions
Use this menu to delete messages in each message
folder all at once.
1. Press [
] to select the message folders to be
cleared.
Pressing the key twice displays the message types
so that you can specify the ones to be cleared.
2. Press .
3. Press [
] to select the check box to delete
protected messages, and then press .
4. Press to confirm the deletion.
69
Menu functions
Default validity: set the length of time your
messages are stored in the SMS server.
Setting name: enter a profile name.
Multimedia message (Menu 5.5.2)
You can configure MMS settings.
• Sending settings: set up the options for sending
MMS messages:
Delivery report: set the network to inform you
when your messages have been delivered.
Hide address: set your address to be hidden from
the recipient’s phone.
Read reply: send a read-reply request along with
your messages.
Priority: set the priority level of messages.
Expiry date: set the length of time messages are
stored in the MMS server.
Delivery time: set a time delay before messages
are sent.
Outgoing message size: select a maximum size
of attached items allowed for messages.
70
•
Retrieve settings: set up the options for
receiving MMS messages:
Reject unknown senders: reject messages from
unknown senders.
Allow adverts: accept advertisements.
Allow information: accept information
messages.
Allow reports: set the network to inform the
sender when a message has been delivered to you.
Recep. in home network: determine if your
phone retrieves new messages automatically when
you are in your home service area.
Reception when abroad: determine if your
phone retrieves new messages automatically when
you are roaming on another network.
Reception within home network or abroad has the
following options:
- Manual: the phone displays notifications. Use
the Retrieve option to manually download new
messages.
Email (Menu 5.5.3)
You can configure e-mail settings.
•
Sending settings: set up the options for sending
e-mails:
Send copy to self: send a copy of your e-mails to
your e-mail account.
Delivery receipt: set the network to inform you
when your e-mails have been delivered.
Read reply: send a read-reply request along with
e-mails.
Reply-To address: set an e-mail address to
receive read-reply messages from recipients.
•
Messages (Menu 5)
You cannot change e-mail profile and account
settings while an e-mail is being sent or retrieved.
Priority: select the priority level of e-mails.
Include signature: attach your name, phone
number, a simple memo, or a tag line to your
e-mails.
Edit name: edit the name in your signature.
Edit number: edit the phone number in your
signature.
Edit note: edit the tag line in your signature.
Reception settings: set up the options for
receiving e-mails:
Check interval: determine how often the phone
checks the server for incoming e-mails. If you
select Do not notify, use the Check for new
email option to receive new e-mails manually.
Read reply: determine whether or not the phone
sends a read-reply for incoming e-mails. If you
select Reply reminder, the phone asks you to
send a read-reply.
Reject if larger than: determine the maximum
size for incoming e-mails. Your phone will reject
e-mails that exceed the specified size.
Menu functions
•
- Automatic: the phone automatically retrieves
messages from the server.
- Reject: the phone rejects all messages.
Profile: select a connection profile to be used for
MMS. You can also create or edit a profile.p.
100
71
Menu functions
•
•
72
Download method: set whether the phone
downloads e-mail headers only or e-mail headers
and bodies both.
Leave copy of messages on server: leave
copies of e-mails on the e-mail server after
retrieving.
Block list: specify e-mail addresses or subjects
you want to reject.
Email account: set up an e-mail account and
select an account to be used.
Current account: check or select an account.
Account settings: configure e-mail accounts
using different e-mail servers. Set the options for
each account:
- Account name: enter a name for the currently
selected account.
- User name: enter a user name.
- Email address: enter your e-mail address.
- SMTP server: enter the IP address or host name
of the outgoing e-mail server.
- SMTP port: enter the SMTP port number.
- Connect to POP3 server first/Connect to
IMAP4 server first: connect to the POP3 or
IMAP4 server before connecting to the SMTP
server to send e-mails.
- Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
When the protocol type is POP3:
- POP3 server: enter the IP address or host name
of the server that receives your e-mail.
- POP3 port: enter the POP3 port number.
- User ID: enter the POP3 user name.
- Password: enter the POP3 password.
- Use SMTP authentication: enable SMTP
authentication, which requires the user to login
before sending e-mails.
- Same as POP3: select if you want the SMTP
server to have the same parameters as the POP3
server.
•
- APOP login: connect to the server by using the
APOP login scheme.
- Include attachments: select this option to
receive attachments with e-mails.
- Email retrieval limit: set the number of
headers you will retrieve from the server.
- Secure connection: use a secured connection
for e-mail service.
Email profile: select a connection profile to be
used for e-mail services. You can also create or
edit a profile.p. 100
Menu functions
Messages (Menu 5)
- SMTP user ID: enter the SMTP user name.
- SMTP password: enter the SMTP password.
- APOP login: connect to the server by using the
APOP login scheme.
- Secure connection: use a secure connection for
the e-mail service.
When the protocol type is IMAP4:
- IMAP4 server: enter the IP address or host
name of the server that receives your e-mail.
- IMAP4 port: enter the IMAP4 port number.
- User ID: enter the IMAP4 user name.
- Password: enter the IMAP4 password.
- Use SMTP authentication: enable SMTP
authentication, which requires the user to login
before sending e-mails.
- Same as IMAP4: select if you want the SMTP
server to have the same parameters as the
IMAP4 server.
- SMTP user ID: enter the SMTP user name.
- SMTP password: enter the SMTP password.
Push message (Menu 5.5.4)
You can change the settings for receiving push
messages from the wireless web server.
• Receive: set how your phone receives push
messages. If you select Block list, the phone will
not accept messages from the specified addresses
on the Block list.
• Block list: manage blocked server addresses.
73
Menu functions
Broadcast (Menu 5.5.5)
Tips for Digital Rights Management
You can change the settings for receiving broadcast
messages.
• Receive: select to receive broadcast messages, or
not.
• Channel list: indicate the channels from which
you wish to receive broadcast messages. Please
contact your service provider for further details.
• Language: select the preferred languages in
which broadcast messages display.
As a result of the Digital Rights Management (DRM)
system, some of the media items you download from
the Internet or receive by MMS may require a licence
key to access them.
Memory status (Menu 5.6)
Use this menu to view the amount of memory
currently in use in each message folder.
File manager (Menu 6)
The File manager menu allows you to access images,
videos, music files, and sound files stored in the
phone’s memory or on a memory card.
74
To access this menu, press in Idle mode and
select File manager.
You can acquire the key from the website which owns
the rights to the content; use the Activate key
option.
Note the following icons on the list:
•
: Forwardable item with a valid key.
•
: Forwardable item without a valid key.
•
: Unforwardable item with a valid key.
•
: Unforwardable item without a valid key.
Depending on the file format or properties, your
phone may not support some media files.
Images (Menu 6.1)
This menu displays photos you have taken and images
you have downloaded, received in messages, or
imported from a computer.
Viewing an image
1. Select an image folder.
2. Select an image.
Viewing a slide show
You can view your photos as a slide show, a sequential
presentation of each photo in the current folder.
1. Select Photos.
2. Press and select Slide show.
3. Select an interval option. The slide show begins.
4. Press to stop the slide show.
Using image options
While viewing an image, press to access
the following options:
• List: return to the image list.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as: set the image as wallpaper for the main
display or as a caller ID image for a Phonebook
entry.
•
•
•
•
•
•
•
•
•
Activate key: get a new licence key when the key
for the selected DRM file expires.
Delete: delete the file.
Rename: change the file name.
Move to: move the file to another folder or to a
memory card.
Copy to memory card: copy the file to a memory
card.
Visible to Bluetooth: share the file or all files
with other Bluetooth devices.
Protection: protect the file from being deleted.
Details: access the file properties.
Key management: manage the licence keys you
have acquired.
Videos (Menu 6.2)
This menu displays video clips you have recorded,
downloaded, received in messages, or imported from
a computer.
Video clips recorded on other devices, such as
camcorders, may not play correctly.
75
Menu functions
Playing a video clip
•
1. Select a video folder.
2. Select a video clip.
•
During playback, use the following keys:
Key
Pauses or resumes playback.
•
•
•
Left
Returns to the previous file. Moves
backward in a file when held down.
Right
Skips to the next file. Moves forward
in a file when held down.
•
Adjusts the volume.
•
Down
Stops playback.
Using video options
After playback, press < > to access the following
options:
• List: return to the video list.
76
•
Function
•
•
•
Send via: send the file via MMS, e-mail, or
Bluetooth.
Set as wallpaper: set the video clip, if saved as a
3GP file, as wallpaper for the main display.
Activate key: get a new licence key when the key
for the selected DRM file expires.
Delete: delete the file.
Rename: change the file name.
Move to: move the file to another folder or to a
memory card.
Copy to memory card: copy the file to a memory
card.
Visible to Bluetooth: share the file or all files
with other Bluetooth devices.
Protection: protect the file from being deleted.
Details: access the file properties.
Key management: manage the licence keys you
have acquired.
Music (Menu 6.3)
This menu displays MP3 files you have downloaded or
imported from a computer.
When you play a file from this menu, without first
adding it to the play list in the music player,
background play is not supported.
Sounds (Menu 6.4)
•
•
•
•
•
Playing a sound clip
1. Select a sound folder.
2. Select a sound clip. For a voice memo, see Voice
recorder.p. 51
Using sound options
While playing a sound clip, press to
access the following options:
•
•
•
•
File manager (Menu 6)
This menu displays voice memos you have recorded,
and sound clips you have downloaded, received in
messages, or imported from a computer.
•
List: return to the sound list.
Send via: send the file via MMS, e-mail, or
Bluetooth.
Set as: set the file as your ringtone or as a
ringtone for a Phonebook entry.
Activate key: get a new licence key when the key
for the selected DRM file expires.
Delete: delete the file.
Rename: change the file name.
Move to: move the file to another folder or to a
memory card.
Copy to memory card: copy the file to a memory
card.
Visible to Bluetooth: share the files with other
Bluetooth devices.
Protection: protect the file from being deleted.
Details: access the file properties.
Key management: manage the licence keys you
have acquired.
Menu functions
Select a file. The music player opens.p. 49
•
•
77
Menu functions
Other files (Menu 6.5)
Key
Function
Use this menu to view, without corruption, various
document files and files stored in the phone’s memory,
or on a memory card. Available file formats are DOC,
XLS, PPT, PDF, and TXT.
1/
Zooms out.
Viewing a document
Select a file. Picsel File Viewer runs to open the
document.
• Depending on the file size or memory capacity
of Picsel File Viewer, some files may not open
properly.
• If a document file contains languages
unsupported by Picsel File Viewer, the content of
the document will not display correctly.
Use the following keys to view the document:
Key
Function
Up/Down/
Left/Right
Pans around the page.
Fits the document to the page size.
78
Returns to the first page.
3/
Zooms in.
Returns to the previous page.
Moves to the next page.
Moves to the last page.
Changes the display to Full screen
view or Normal screen view.
Using document options
While viewing a document, press to
access the following options:
• Full screen view/Normal view: change the view
mode.
• Zoom: zoom in or out.
• Fit to: fit the document to the page size, screen
width, or screen height.
•
•
•
•
•
•
•
•
•
•
Use this menu to access the files stored in a memory
card. This menu is shown only when a memory card is
inserted into the phone.
Your phone is preset to use FAT16-formatted
memory cards. If you insert a FAT32-formatted
memory card, the phone will ask you to reformat the
memory card. If you do not, you will not be able to
access the card from the phone.
Calendar (Menu 7)
•
Memory card (Menu 6.6)
Menu functions
•
Go to: move to another page of the document.
Screen panning/Normal panning: change the
panning mode to by screen or by preset pixel.
Show controller/Hide controller: show or hide
the shortcut tool bar of the file viewer.
Send via: send the file via MMS, e-mail, or
Bluetooth.
Move to memory card: move the file to a
memory card.
Copy to memory card: copy the file to a memory
card.
Delete: delete the selected file.
Rename: change the file name.
Visible to Bluetooth: share the file or all files
with other Bluetooth devices.
Protection: protect the file from being deleted.
Details: access the file properties.
Shortcuts: view the functions of the keys you can
use in Picsel File Viewer.
Memory status (Menu 6.7)
Use this menu to view memory information for media
items in the phone’s memory or on a memory card.
For the phone’s memory, press [Left] or [Right] to
view the memory status by size or number of items.
Calendar (Menu 7)
The Calendar menu enables you to keep track of your
schedule.
To access this menu, press in Idle mode and
select Calendar.
79
Menu functions
Selecting a day on the calendar
When you enter the Calendar menu, the calendar in
Month view appears with today’s date indicated by a
green box.
• Press [Left] or [Right] to move by day.
• Press [Up] or [Down] to move by week.
• Press [ / ] to move by month.
Creating an item
You can store appointments, anniversaries, memos,
and tasks on the calendar. More than one item per day
can be stored.
Entering an appointment
1. Select a date on the calendar.
2. Press and select Create →
Appointment.
3. Enter information or change the settings:
• Subject: enter a title for the appointment.
• Details: enter appointment details.
• Start date and Start time: enter the starting
date and time for the appointment.
80
•
AM/PM: select AM or PM in 12-hour time
format.
• End date and End time: enter the ending date
and time for the appointment.
• AM/PM: select AM or PM in 12-hour time
format.
• Location: enter information about the
appointment location.
• Alarm: set an alarm for the appointment.
• Before: set how long before the appointment
the alarm is to alert you.
• Alarm tone: select an alarm tone.
• Repeat: set the appointment to recur and
select a repeat option.
• Until: set the ending date, if the appointment
will recur.
4. Press to save the appointment.
Entering an anniversary
1. Select a date on the calendar.
2. Press and select Create →
Anniversary.
Entering a task
1. Select a date on the calendar.
2. Press and select Create → Task.
3. Enter information or change the settings:
• Task: enter information about the task.
• Start date: enter the starting date.
• Due date: enter the ending date.
• Select priority: select a priority level.
4. Press to save the task.
Menu functions
Calendar (Menu 7)
3. Enter information or change the settings:
• Occasion: enter information about the
anniversary.
• Date: enter the date.
• Alarm: select to set an alarm for the
anniversary.
• Before: set how long before the anniversary
the alarm is to alert you.
• Alarm time: enter the time for the alarm to
ring.
• AM/PM: select AM or PM in 12-hour time
format.
• Alarm tone: select an alarm tone.
• Repeat every year: set the phone to remind
you of the anniversary every year.
4. Press to save the anniversary.
Consulting the calendar
Once you have created items, the item icons and the
number of items for a specific day appears at the
bottom of the calendar.
•
Appointment
•
Anniversary
Entering a memo
•
Task
•
Memo
1. Select a date on the calendar.
2. Press and select Create → Memo.
3. Enter a memo and press and select
Save.
•
Festival
81
Menu functions
Viewing an item
•
1. Select a date on the calendar to display the items
for the day.
2. Select an item to view its details.
3. Press [Left] or [Right] to access the other items
scheduled for the selected day.
•
•
•
•
While viewing an item, press to access
the following options:
• Edit: edit the item.
• Create: add a new item.
• Send via: send the item via SMS, MMS, e-mail, or
Bluetooth.
• View mode: change the view mode of the
calendar.
• Delete: delete the item.
• Memory status: access memory information for
the items stored on the calendar.
82
View mode: change the view mode of the
calendar. next section
Create: add a new item.
Go to: select today’s date or enter a specific date.
Sort by: sort items by type of item.
Delete: delete the items stored on the calendar by
using various deleting options.
You can delete recurring items in Day view only.
•
•
Missed alarm events: view items whose alarms
you have missed.
Memory status: access memory information for
the items stored on the calendar.
Viewing items in a different mode
You can change the calendar display to Day view or
Week view. Press and select View mode
→ a view mode.
Using calendar options
Day view
On the calendar, press to access the
following options:
You can view items for the selected date. Select an
item to view its details.
Week view
Taking a photo
You can take photos in various modes. The camera
produces JPEG photos.
Camera (Menu 8)
You can view items for the selected week. A cell on the
timetable indicates the presence of a schedule item.
Select a cell in the day you want.
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are
not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Menu functions
The following icons may display to indicate the item
status:
•
Alarm set
•
Recurring item
•
Task item priority (Red: high, Blue: normal,
Grey: low)
•
Completed task
When you take a photo in direct sunlight or in bright
conditions, shadows may appear on the photo.
Taking a photo
Camera (Menu 8)
You can use the camera module embedded in your
phone to take photos and record videos.
To access this menu, press in Idle mode and
select Camera, or press and hold [ ] in Idle mode.
1. Access the Camera menu or press [ ] to turn on
the camera.
2. Make any desired adjustments.
• Press < > to access camera options.
next section
• Use the keypad to change the camera settings
or switch to other modes.p. 85
83
Menu functions
3. Press [
] or [ ] to take a photo. The photo is
saved in the Photos folder.
4. To
Press
access photo options
.p. 86
delete the photo
[C] and then .
return to Capture mode
.
Using camera options in Capture mode
In Capture mode, press < > to access the following
options:
• Record video: switch to Record mode.
• Shooting mode: take a photo in the following
modes:
Single shot: take a photo in Normal mode. You
can select whether or not the camera automatically
saves a photo.
Multi-shot: take a series of action stills. You can
select the number of photos the camera will take
and the shooting speed.
84
•
•
•
•
•
Mosaic shot: take several stills and save them in
one frame. You can select the layout.
Effects: change the colour tone or apply a special
effect.
Frames: apply a decorative frame.
Timer: set a time delay before the camera takes a
photo.
Go to photos: access the Photos folder.
Settings: change the default settings for taking a
photo.
Size: select an image size.
Quality: select an image quality setting.
Viewfinder: select a preview screen.
Scene programs: set whether or not to use Night
shot mode.
Shutter sound: select the sound that you hear
when you press the shutter release, [
] or [ ].
Zoom sound: turn the sound effect for zooming
on or off.
Brightness sound: turn the sound effect for
brightness adjustment on or off.
Key
Function
Up/Down
Zooms in or out.
Flips the image vertically.
Switches to Record mode.p. 86
Changes the image size.
Changes the image quality.
Changes the shooting mode.
Changes the colour tone or applies a
special effect.
Changes the white balance.
Selects a decorative frame.
Using the keypad in Capture mode
Sets the timer.
You can use the keypad to customise your camera
settings in Capture mode.
Changes the ISO setting.
Key
Left/Right
Switch to Night shot mode.
Function
Adjusts the image brightness.
Camera (Menu 8)
Menu functions
•
Metering Exposure: select a method to
determine the exposure of an image, based on a
specific area of the image.
White balance: adjust the colour balance of the
image. You can make your photo appear warmer
or cooler.
ISO: change the ISO setting, which controls the
sensitivity of your camera. For low light situations,
select a higher ISO number. The higher the ISO
number, the faster the camera shutter functions
and the more sensitive the camera is to light.
Higher ISO settings may bring some distortion to
an image.
Short cuts: view the functions of the keys you can
use in Capture mode.
Goes to the Photos folder.
Changes the preview screen.
85
Menu functions
Using photo options
Recording a video
After saving a photo, press to access the
following options:
• View: access one of the multi-shot photos.
• Take another: return to Capture mode.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as: set the photo as wallpaper for the main
display or as a caller ID image for a Phonebook
entry.
• Delete: delete the file.
• Rename: change the file name.
• Go to photos: access the Photos folder.p. 74
• Protection: protect the file from being deleted.
• Details: access the file properties.
1. In Capture mode, press [1].
2. Make any desired adjustments.
• Press < > to access camera options.
next section
• Use the keypad to change the camera settings
or switch to other modes.p. 87
3. Press [
] or [ ] to start recording.
4. Press < > or [ ] to stop recording. The video is
automatically saved in the Video clips folder.
Recording a video
You can record a video of what is displayed on the
camera screen and save it.
86
5. To
Press
play back the video clip
].
>.p. 88
access video options
delete the video clip
[C] and then .
return to Record mode
>.
Using camera options in Record mode
In Record mode, press <
options:
> to access the following
•
•
•
•
Zoom sound: turn the sound effect for zooming
on or off.
Brightness sound: turn the sound effect for
brightness adjustment on or off.
White balance: adjust the colour balance of the
image. You can make your video appear warmer or
cooler.
Short cuts: view the functions of the keys you can
use in Record mode.
•
Menu functions
•
Camera (Menu 8)
Take photo: switch to Capture mode.
Effects: change the colour tone or apply a special
effect.
Timer: set a time delay before the camera starts
recording.
Go to videos: access the Video clips folder.
Settings: change the following settings for
recording a video:
Recording mode: select a video recording mode.
Select Normal to record a video within the limit of
the currently available memory. The video clip is
saved in MP4 format.
Select Limit for MMS/Wallpaper to record a
video suitable for messaging or for setting as
wallpaper. The video clip is saved in 3GP format.
Size: select a frame size.
Quality: select an image quality setting.
Viewfinder: select a preview screen.
Scene programs: set whether or not to use Night
shot mode.
Audio record: record audio with a video clip.
Using the keypad in Record mode
You can use the keypad to customise your camera
settings in Record mode.
Key
Function
Left/Right
Adjusts the image brightness.
Up/Down
Zooms in or out.
Flips the image vertically.
Switches to Capture mode.p. 83
Changes the frame size.
87
Menu functions
Key
Function
•
Changes the image quality.
Changes the video recording mode.
Changes the colour tone or applies a
special effect.
•
•
•
Changes the white balance.
Mutes or unmutes audio.
Sets the timer.
Switches to Night shot mode.
Goes to the Video clips folder.
Changes the preview screen.
Using video options
After saving a video clip, press < > to access the
following options:
• Record another: return to Record mode.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
88
•
•
Set as wallpaper: set the video clip, if saved as a
3GP file, as wallpaper for the main display.
Delete: delete the file.
Rename: change the file name.
Go to videos: access the Video clips folder.
p. 75
Protection: protect the file from being deleted.
Details: access the file properties.
Settings (Menu 9)
The Settings menu provides you with various setting
options to customise the phone to your preferences
and needs. You can also reset the settings to their
default status.
To access this menu, press in Idle mode and
select Settings.
Language (Menu 9.2.1)
Use this menu to change the time and date displayed
on your phone. Before setting the time and date,
specify your time zone in the World time menu.
p. 53
• Set time: enter the current time.
• AM/PM: select AM or PM in 12-hour time format.
• Time format: select a time format.
• Set date: enter the current date.
• Date format: select a date format
• Calendar starting day: set which day of the
week the calendar starts with.
Use this menu to select a language for the display
text.
Many different features of your phone’s system can be
customised to suit your preferences.
Some menus may not be available, depending on
your service provider.
Greeting message (Menu 9.2.2)
Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
Shortcuts (Menu 9.2.3)
You can use the Navigation keys as shortcuts to access
specific menus directly from Idle mode. Use this menu
to assign a shortcut to a key.
Settings (Menu 9)
Phone settings (Menu 9.2)
Menu functions
Time and date (Menu 9.1)
Assigning a shortcut menu
1. Select a key to be used as a shortcut key.
2. Select a menu to be assigned to the key.
Using shortcut options
Press to access the following options:
• Change: assign or change a shortcut menu.
• Remove: deactivate the shortcut assignment to
the selected key.
• Remove all: deactivate all shortcut assignments.
89
Menu functions
Volume key (Menu 9.2.4)
Rotation settings (Menu 9.2.6)
Use this menu to set whether the phone mutes the call
ringer or rejects a call if you press and hold [ / ]
when a call comes in.
Use this menu to select the menu to be accessed when
you rotate the phone’s screen in Idle mode.
Extra settings (Menu 9.2.5)
You can turn the automatic redialling or answering
feature on or off, and lock the external keys.
• Auto redial: set the phone to make up to ten
attempts to redial a phone number after an
unsuccessful call.
• Active flip: answer an incoming call by opening
the phone.
• Anykey answer: answer an incoming call by
pressing any key, except for and [ ].
• Cover keypad lock: lock the exposed keys to
keep accidental presses from affecting your
phone’s operation when the phone is closed.
90
Display settings (Menu 9.3)
Use this menu to change settings for the display and
backlight.
Wallpaper (Menu 9.3.1)
You can set up the idle screen on the main display.
• Main display: select an image or video clip to be
displayed on the main display.
• Text position: select a text position. If you do not
want to display text in Idle mode, select Off.
• Text mode: select a font style.
• Text colour: select a font colour.
• Graphic logo: set the phone to display a graphic
icon instead of the service provider’s logo on the
idle screen. This is only available if a graphic icon
has been received in a message.
Incoming call (Menu 9.4.1)
You can select a skin colour pattern for Menu mode.
Use this menu to change the sound settings for
incoming calls.
• Ringtone: select a ringtone to be used for the call
ringer.
• Volume: select a ringtone volume.
• Alert type: specify how you are to be informed of
incoming calls.
Brightness (Menu 9.3.3)
You can adjust the brightness of the display for
varying lighting conditions.
Dialing display (Menu 9.3.4)
Show caller information (Menu 9.3.5)
Use this menu to set the phone to display missed call
notifications with the most recently missed caller’s
information.
TV-out (Menu 9.3.6)
Use this menu to select the video system for a TV.
Sound settings (Menu 9.4)
Use this menu to customise various sound settings.
Keypad tone (Menu 9.4.2)
Settings (Menu 9)
Use this menu to select a font colour and size for the
numbers entered and background colour of the display
while dialling.
Menu functions
Skin (Menu 9.3.2)
Use this menu to select the tone that the phone
sounds when you press a key.
You can adjust the keypad tone volume using
[ / ] in Idle mode.
Message tone (Menu 9.4.3)
Use this menu to change the sound settings for
incoming SMS messages, MMS messages, e-mails,
and broadcast messages individually.
• Tone: select one of the several message tones.
91
Menu functions
•
•
Alert type: specify how you are to be informed
when a message comes in.
Repetition: specify how often the phone informs
you of a new message.
Power on/off (Menu 9.4.4)
Use this menu to select the melody that the phone
sounds when it is switched on or off.
Flip tone (Menu 9.4.5)
Use this menu to select the tone that the phone
sounds when you open or close the phone.
Ontime alarm (Menu 9.4.6)
Use this menu to set the phone to sound an alert
every hour on the hour.
Silent mode (Menu 9.4.7)
Use this menu to set how the phone acts to alert you
to a specific event while in Quiet mode.
Extra tones (Menu 9.4.8)
Use this menu to customise additional tones for the
phone.
92
•
•
•
•
Minute minder: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
Connection tone: set the phone to beep when an
outgoing call connects to the system.
Alert on call: set the phone to beep when you
receive a new message or when the time for an
alarm comes during a call.
Indicative tone: set the phone to beep when a
pop-up window displays.
Light settings (Menu 9.5)
Use this menu to change settings for the light.
Back light (Menu 9.5.1)
You can select the length of time the backlight or
display stays on in Dim mode.
• Main display normal: select the length of time
the backlight stays on.
• Main display dim: select the length of time the
display stays on in Dim mode after the backlight
turns off. After a specified time, the display turns
off.
Keypad light (Menu 9.5.2)
Use this menu to access network services. Please
contact your service provider to check their availability
and subscribe to them.
2.
3.
4.
5.
6.
Call diverting (Menu 9.6.1)
This network service reroutes incoming calls to a
phone number that you specify.
1. Select a call diverting option:
• Divert always: divert all calls.
• Busy: divert calls when you are on another
call.
7.
No reply: divert calls when you do not answer
the phone.
• Unreachable: divert calls when you are not in
your service area or when your phone is
switched off.
• Cancel all: cancel all call diverting options.
Select the type of calls to be diverted.
Select Activate. To deactivate call diverting, select
Deactivate.
Move to the Divert to line.
Enter the number to which calls are to be diverted.
If you selected No reply, move to the Seconds
line and select the length of time the network
delays before diverting a call.
Press .
Settings (Menu 9)
Network services (Menu 9.6)
•
Menu functions
Use this menu to set how the phone controls the use
of the keypad light.
• Any time: the keypad light is always used.
• Night time: the keypad light is used only between
5:00 PM and 9:00 AM.
• Custom time: specify the time period that the
keypad light is used.
Call barring (Menu 9.6.2)
This network service allows you to restrict your calls.
1. Select a call barring option:
• All outgoing calls: prohibit all outgoing calls.
• International: prohibit international calls.
93
Menu functions
•
International except home: only allow calls
to numbers within the current country when
you are abroad, and to your home service area.
• All incoming calls: prohibit incoming calls.
• Incoming while abroad: prohibit incoming
calls when you use your phone outside of your
home service area.
• Cancel all: cancel all call barring settings,
allowing calls to be sent and received normally.
• Change barring password: change the call
barring password obtained from your service
provider.
2. Select the type of calls to be barred.
3. Select Activate. To deactivate call barring, select
Deactivate.
4. Enter the call barring password supplied by your
service provider and press .
Call waiting (Menu 9.6.3)
This network service informs you when someone is
trying to reach you while you are on another call.
94
1. Select the type of calls to which call waiting option
will apply.
2. Select Activate. To deactivate call waiting, select
Deactivate.
Network selection (Menu 9.6.4)
This network service allows you to manually select the
network to be used while roaming outside of your
home area, or to let the network be chosen
automatically.
You can select a network other than your home
network only if there is a valid roaming agreement
between the two.
Caller ID (Menu 9.6.5)
This network service allows you hide your phone
number from the person you are calling. If you select
Default, the phone will use the default setting
provided by the network.
Some networks may not allow you to change this
setting.
Voice mail server (Menu 9.6.6)
Use this menu to store the number of the voicemail
server and access your voicemails.
•
Closed user group (Menu 9.6.7)
Use this menu to set incoming and outgoing calls to be
restricted to a selected user group. For details about
how to create a closed user group (CUG), contact your
service provider.
• Index list: add, delete, or activate CUG index
numbers.
• Outside access: enable calls to numbers other
than those in the closed user group. This feature
depends on the nature of your CUG subscription.
Band selection (Menu 9.6.8)
For the phone to make and receive phone calls, it
must register with an available network. Your phone
can handle any of the following types of networks:
GSM 1900 and Combined GSM 900/1800.
Settings (Menu 9)
•
Connect to voice server: connect to the
voicemail server to listen to your messages.
Voice server number: enter the voicemail server
number.
Default group: enable the default CUG, if you
have set one with your service provider. When
making a call, you are given the option of using
your default CUG, instead of selecting one from the
list.
Menu functions
You must store the voicemail server number before
accessing the server. Your service provider can give
you the number.
•
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you may need to change to an
appropriate band.
95
Menu functions
Bluetooth (Menu 9.7)
Using the Bluetooth feature, you can connect the
phone wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or control
the phone remotely.
Bluetooth technology allows free wireless connections
between all Bluetooth-compliant devices within a
range of 10 meters. Since the devices communicate
using radio waves, they do not need to be in line of
sight to each other.
• If there are obstacles between the devices, the
operating distance may be reduced.
• It is recommended that you do not use the
Bluetooth feature while using multimedia features,
such as voice recorder, camera, and music player,
or vice versa, for better performance.
• Some devices may not be compatible with your
phone.
Setting up the Bluetooth feature
The Bluetooth menu provides the following options:
96
•
•
•
•
•
•
Activation: activate or deactivate the Bluetooth
feature.
My devices: search for connectable Bluetooth
devices.
My phone’s visibility: allow other Bluetooth
devices to search for your phone.
My phone’s name: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
Secure mode: determine if the phone asks for
your confirmation when other devices access your
data.
Bluetooth services: display available Bluetooth
services.
Searching for and pairing with a Bluetooth
device
1. From the Bluetooth menu, select My devices.
2. Select Search for new devices.
After searching, a list of devices to which you can
connect displays. The following icons indicate the
type of device:
Stereo headset
•
PDA
•
Mobile phone
•
Unknown device
•
Mono headset/Hands-free car kit
Some devices, especially headsets or hands-free car
kits, may have a fixed Bluetooth PIN, such as 0000.
If the other device has a code, you must enter it.
Settings (Menu 9)
The colour of the icon indicates the status of the
the device:
• Grey for unpaired devices
• Blue for paired devices
• Red for devices that are currently connected to
your phone
3. Select a device.
4. Enter a Bluetooth PIN and press . This code
is used just once and you do not need to memorise
it.
When the owner of the other device enters the
same code, pairing is complete.
From the device list, press to access the
following options:
• Connect: connect to a headset or hands-free car
kit.
• Disconnect: end the connection with the
connected device.
• Browse files: search for data from the device and
import data directly to your phone.
• Service list: access the Bluetooth service list of
the device.
• Rename: rename the paired device.
• Authorise device/Unauthorised device:
determine whether or not the phone asks you to
permit connection when other devices try to
connect to your phone.
• Delete: remove the selected device or all devices
from the list.
Menu functions
•
Using device options
Sending data via Bluetooth
1. Activate the Bluetooth feature.
97
Menu functions
2. Select the application in which the item you want
to send is stored.
3. Scroll to the item you want and press .
4. Select Send via → Bluetooth.
The phone searches for devices within range and
displays a list of available devices.
5. Select a device.
6. If necessary, enter the Bluetooth PIN for pairing
and press .
Security (Menu 9.8)
Receiving data via Bluetooth
The 4- to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
To receive data via Bluetooth, your phone’s Bluetooth
feature must be active.
1. If an unauthorised Bluetooth device sends data to
your phone, press to allow the device to
access your phone.
2. Press to receive data.
98
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
If you enter an incorrect PIN/PIN2 three times in a
row, the SIM card is blocked. To unblock it, you need
to enter your PUK/PUK2 (Personal Unblocking Key).
The codes are supplied by your service provider.
PIN check (Menu 9.8.1)
Change PIN code (Menu 9.8.2)
Use this menu to change your PIN. The PIN check
feature must be enabled to change the PIN.
SIM lock (Menu 9.8.6)
Use this menu to lock the phone from unauthorised
use.
This menu allows your phone to work only with the
current SIM by assigning a SIM lock code. You must
enter the SIM lock code to use a different SIM card.
When this feature is enabled, you must enter a 4- to
8-digit phone password each time the phone is
switched on.
The password is preset to 00000000. To change the
password, use the Change password menu.
Use this menu to change your phone password.
Privacy (Menu 9.8.5)
Use this menu to lock access to messages, media files,
all menu functions on the phone, or DMB content,
except for call functions.
When a privacy option is enabled, you must enter the
phone password to access the locked items or
functions.
Fixed dialling mode (Menu 9.8.7)
If supported by your SIM card, Fixed Dialling Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored on
the SIM card.
Settings (Menu 9)
Change password (Menu 9.8.4)
Menu functions
Phone lock (Menu 9.8.3)
Change PIN2 code (Menu 9.8.8)
If supported by your SIM card, use this menu to
change your current PIN2.
Connection settings (Menu 9.9)
Use this menu to create and customise the profiles
containing the settings for connecting your phone to
the network. You need these settings to use the web
browser or send MMS messages or e-mails.
99
Menu functions
Your phone is set up by default for connecting to the
network. If you change the settings without first
checking with your service provider, the web
browser, MMS, and e-mail features may not work
properly.
Creating a profile
1. Press . If a profile has already been saved,
press and select Add new
connection.
2. Specify profile parameters:
• Profile name: enter a profile name.
• Homepage URL: enter the URL address of the
page to be used as your homepage.
• Proxy: activate or deactivate the proxy server.
• IP address: enter the IP address of the proxy
server.
• Port: enter the port number of the proxy
server.
• Linger time: set a time period after which the
network is disconnected if there has been no
new data traffic in that time.
100
•
DNS: activate or deactivate the DNS (Domain
Name Server) addresses.
• DNS1 and DNS2: enter the primary and
secondary DNS addresses.
• Bearer: select the network bearer type.
• Advanced settings: change the advanced
options. Depending on the bearer setting,
available options vary.
When the bearer is set to GPRS:
APN: enter the access point name.
Login ID: enter the login ID.
Password: enter the login password.
When the bearer is set to GSM:
Dial number: enter the PPP phone number.
Login ID: enter the login ID.
Password: enter the login password.
Data call type: select a call type for data
transmission.
3. Press to save the profile.
Using profile options
Press to access the following options:
• Edit: edit the selected profile.
• Delete: delete the profile.
• Add new connection: add a new profile.
Reset settings (Menu 9.10)
Use this menu to reset the phone’s settings you have
changed.
1. Press [
] to select the setting categories to be
reset.
2. Press .
3. Press to confirm the reset.
4. Enter the phone password and press .
The password is preset to 00000000. You can
change this password.p. 99
Solve problems
Help and personal needs
To save the time and expense of an unnecessary service
call, perform the simple checks in this section before
contacting a service professional.
When you switch on your phone, the following
messages may appear:
“Insert SIM”
• Be sure that the SIM card is correctly installed.
“Enter password”
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
“Enter PIN”
• You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu.
101
“Enter PUK”
• The PIN has been entered incorrectly three times
in succession, and the SIM card is now blocked.
Enter the PUK supplied by your service provider.
•
“No service,” “Network failure,” or “Not done”
displays
• The network connection has been lost. You may be
in a weak signal area. Move and try again.
• You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
Your correspondent cannot hear you speaking
• Be sure that you have switched on the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is located
at the bottom of the phone.
You have entered a number but it was not dialled
• Be sure that you have pressed [ ].
• Be sure that you have accessed the right cellular
network.
• Be sure that you have not set an outgoing call
barring option.
Your correspondent cannot reach you
• Be sure that your phone is switched on. ([
pressed for more than one second.)
102
•
Be sure that you are accessing the correct cellular
network.
Be sure that you have not set an incoming call
barring option.
The phone starts beeping and “Warning. Low
battery” flashes on the display
• Your battery is insufficiently charged. Recharge the
battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display
). The number of bars indicates the signal
strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to a
window if you are in a building.
Health and safety information
No number is dialed when you re-call a
Phonebook entry
• Use the Phonebook Search feature to ensure the
number has been stored correctly.
• Re-store the number, if necessary.
The battery doesn’t charge properly or the
phone sometimes turns itself off
Wipe the charging contacts both on the phone and on
the battery with a clean soft cloth.
If the above guidelines do not help you to
solve the problem, take note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
exposure limits for radio frequency (RF) energy set by
the Federal Communications Commission (FCC) of the
U.S. government. These FCC exposure limits are
derived from the recommendations of two expert
organizations, the National Counsel on Radiation
Protection and Measurement (NCRP) and the Institute
of Electrical and Electronics Engineers (IEEE). In both
cases, the recommendations were developed by
scientific and engineering experts drawn from
industry, government, and academia after extensive
reviews of the scientific literature related to the
biological effects of RF energy.
103
Health and safety information
The exposure limit set by the FCC for wireless mobile
phones employs a unit of measurement known as the
Specific Absorption Rate (SAR). The SAR is a measure
of the rate of absorption of RF energy by the human
body expressed in units of watts per kilogram (W/kg).
The FCC requires wireless phones to comply with a
safety limit of 1.6 watts per kilogram (1.6 W/kg). The
FCC exposure limit incorporates a substantial margin
of safety to give additional protection to the public and
to account for any variations in measurements.
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power levels
so as to use only the power required to reach the
network. In general, the closer you are to a wireless
base station antenna, the lower the power output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC
that it does not exceed the exposure limit
established by the FCC. Tests for each model phone
are performed in positions and locations (e.g. at the
ear and worn on the body) as required by the FCC.
The highest SAR values for this model phone as
reported to the FCC are:
GSM 1900 Mode(Part 24)
• Head: 0.752 W/Kg.
• Body-worn: 0.646 W/Kg.
For body worn operation, this model phone has been
tested and meets the FCC RF exposure guidelines
whenused with a Samsung accessory designated for
this product or when used with an accessory that
contains no metal and that positions the handset a
uses the phone FCC ID number, A3LSGHP908T.
Sometimes it may be necessary to remove the battery
pack to find the number. Once you have the FCC ID
number for a particular phone, follow the instructions
on the website and it should provide values for typical
or maximum SAR for a particular phone. Additional
product specific SAR information can also be obtained
at www.fcc.gov/cgb/sar.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
from wireless phones. The FDA publication includes
the following information:
What kinds of phones are the subject of this
update?
The term wireless phone refers here to hand-held
wireless phones with built-in antennas, often called
“cell,” “mobile,” or “PCS” phones. These types of
wireless phones can expose the user to measurable
radio frequency energy (RF) because of the short
distance between the phone and the user's head.
These RF exposures are limited by Federal
Communications Commission safety guidelines that
were developed with the advice of FDA and other
federal health and safety agencies. When the phone is
located at greater distances from the user, the
exposure to RF is drastically lower because a person's
RF exposure decreases rapidly with increasing
distance from the source. The so-called “cordless
phones,” which have a base unit connected to the
telephone wiring in a house, typically operate at far
lower power levels, and thus produce RF exposures
well within the FCC's compliance limits.
Health and safety information
minimum of 1.5 cm from the body.
Non-compliance with the above restrictions may
result in violation of FCC RF exposure guidelines.
SAR information on this and other model phones can
be viewed on-line at www.fcc.gov/oet/fccid. This site
105
Health and safety information
Do wireless phones pose a health hazard?
The available scientific evidence does not show that
any health problems are associated with using
wireless phones. There is no proof, however, that
wireless phones are absolutely safe. Wireless phones
emit low levels of radio frequency energy (RF) in the
microwave range while being used. They also emit
very low levels of RF when in the stand-by mode.
Whereas high levels of RF can produce health effects
(by heating tissue), exposure to low level RF that does
not produce heating effects causes no known adverse
health effects. Many studies of low level RF exposures
have not found any biological effects. Some studies
have suggested that some biological effects may
occur, but such findings have not been confirmed by
additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
106
What is FDA's role concerning the safety of
wireless phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new
drugs or medical devices. However, the agency has
authority to take action if wireless phones are shown
to emit radio frequency energy (RF) at a level that is
hazardous to the user. In such a case, FDA could
require the manufacturers of wireless phones to notify
users of the health hazard and to repair, replace or
recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
• “Support needed research into possible biological
effects of RF of the type emitted by wireless
phones;
• “Design wireless phones in a way that minimizes
any RF exposure to the user that is not necessary
for device function; and
•
“Cooperate in providing users of wireless phones
with the best possible information on possible
effects of wireless phone use on human health.
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from
these base stations are typically thousands of times
lower than those they can get from wireless phones.
Base stations are thus not the primary subject of the
safety questions discussed in this document.
Health and safety information
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at
the federal level. The following agencies belong to this
working group:
• “National Institute for Occupational Safety and
Health
• “Environmental Protection Agency
• “Federal Communications Commission
• “Occupational Safety and Health Administration
• “National Telecommunications and Information
Administration
must comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health agencies
for safety questions about wireless phones.
What are the results of the research done
already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radio frequency energy
(RF) exposures characteristic of wireless phones have
yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies,
however, have suggested that low levels of RF could
107
Health and safety information
accelerate the development of cancer in laboratory
animals. However, many of the studies that showed
increased tumor development used animals that had
been genetically engineered or treated with cancercausing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies
exposed the animals to RF for up to 22 hours per day.
These conditions are not similar to the conditions
under which people use wireless phones, so we don't
know with certainty what the results of such studies
mean for human health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use
of wireless phones and primary brain cancer, glioma,
meningioma, or acoustic neuroma, tumors of the brain
or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
However, none of the studies can answer questions
about long-term exposures, since the average period
of phone use in these studies was around three years.
108
What research is needed to decide whether RF
exposure from wireless phones poses a health
risk?
A combination of laboratory studies and
epidemiological studies of people actually using
wireless phones would provide some of the data that
are needed. Lifetime animal exposure studies could be
completed in a few years. However, very large
numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one
exists. Epidemiological studies can provide data that is
directly applicable to human populations, but ten or
more years' follow-up may be needed to provide
answers about some health effects, such as cancer.
This is because the interval between the time of
exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many
years. The interpretation of epidemiological studies is
hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones.
Many factors affect this measurement, such as the
angle at which the phone is held, or which model of
phone is used.
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields
(EMF) Project since its inception in 1996. An influential
result of this work has been the development of a
detailed agenda of research needs that has driven the
establishment of new research programs around the
world. The Project has also helped develop a series of
public information documents on EMF issues.
FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative
Research and Development Agreement (CRADA) to do
research on wireless phone safety. FDA provides the
scientific oversight, obtaining input from experts in
government, industry, and academic organizations.
CTIA-funded research is conducted through contracts
to independent investigators. The initial research will
include both laboratory studies and studies of wireless
phone users. The CRADA will also include a broad
assessment of additional research needs in the
context of the latest research developments around
the world.
Health and safety information
What is FDA doing to find out more about the
possible health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
What steps can I take to reduce my exposure
to radio frequency energy from my wireless
phone?
If there is a risk from these products - and at this
point we do not know that there is - it is probably very
small. But if you are concerned about avoiding even
potential risks, you can take a few simple steps to
minimize your exposure to radio frequency energy
(RF). Since time is a key factor in how much exposure
a person receives, reducing the amount of time spent
using a wireless phone will reduce RF exposure.
• “If you must conduct extended conversations by
wireless phone every day, you could place more
distance between your body and the source of the
RF, since the exposure level drops off dramatically
with distance. For example, you could use a
109
Health and safety information
headset and carry the wireless phone away from
your body or use a wireless phone connected to a
remote antenna.
Again, the scientific data do not demonstrate that
wireless phones are harmful. But if you are concerned
about the RF exposure from these products, you can
use measures like those described above to reduce
your RF exposure from wireless phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to
users of wireless phones, including children and
teenagers. If you want to take steps to lower exposure
to radio frequency energy (RF), the measures
described above would apply to children and
teenagers using wireless phones. Reducing the time of
wireless phone use and increasing the distance
between the user and the RF source will reduce RF
exposure.
110
Some groups sponsored by other national
governments have advised that children be
discouraged from using wireless phones at all. For
example, the government in the United Kingdom
distributed leaflets containing such a recommendation
in December 2000. They noted that no evidence exists
that using a wireless phone causes brain tumors or
other ill effects. Their recommendation to limit
wireless phone use by children was strictly
precautionary; it was not based on scientific evidence
that any health hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free
kits can be used with wireless phones for convenience
and comfort. These systems reduce the absorption of
RF energy in the head because the phone, which is the
source of the RF emissions, will not be placed against
the head. On the other hand, if the phone is mounted
against the waist or other part of the body during use,
then that part of the body will absorb more RF energy.
Wireless phones marketed in the U.S. are required to
meet safety requirements regardless of whether they
are used against the head or against the body. Either
configuration should result in compliance with the
safety limit.
Health and safety information
Do wireless phone accessories that claim to
shield the head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that accessories that claim to shield the head
from those emissions reduce risks. Some products
that claim to shield the user from RF absorption use
special phone cases, while others involve nothing
more than a metallic accessory attached to the phone.
Studies have shown that these products generally do
not work as advertised. Unlike “hand-free” kits, these
so-called “shields” may interfere with proper operation
of the phone. The phone may be forced to boost its
power to compensate, leading to an increase in RF
absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold
devices that claimed to protect wireless phone users
from radiation with making false and unsubstantiated
claims. According to FTC, these defendants lacked a
reasonable basis to substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted
cardiac pacemakers and defibrillators from wireless
telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of
Medical instrumentation (AAMI). The final draft, a joint
effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This
standard will allow manufacturers to ensure that
cardiac pacemakers and defibrillators are safe from
wireless phone EMI. FDA has tested wireless phones
and helped develop a voluntary standard sponsored by
the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and
performance requirements for hearing aids and
wireless phones so that no interference occurs when a
person uses a compatible phone and a compatible
hearing aid at the same time. This standard was
approved by the IEEE in 2000.
111
Health and safety information
FDA continues to monitor the use of wireless phones
for possible interactions with other medical devices.
Should harmful interference be found to occur, FDA
will conduct testing to assess the interference and
work to resolve the problem.
Additional information on the safety of RF exposures
from various sources can be obtained from the
following organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's
(OSHA):
http://www.osha.gov/SLTC/
radiofrequencyradiation/index.html
• National institute for Occupational Safety and
Health (NIOSH):
http://www.cdc.gov/niosh/emfpg.html
112
•
•
•
•
World health Organization (WHO):
http://www.who.int/peh-emf/
International Commission on Non-Ionizing
Radiation Protection:
http://www.icnirp.de
National Radiation Protection Board (UK):
http://www.nrpb.org.uk
Updated 4/3/2002: US food and Drug
Administration
http://www.fda.gov/cellphones
Road Safety
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features,
such as speed dial and redial. If available, these
features help you to place your call without taking
your attention off the road.
2. When available, use a hands-free device. If
possible, add an additional layer of convenience
and safety to your wireless phone with one of the
many hands free accessories available today.
3. Position your wireless phone within easy reach. Be
able to access your wireless phone without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your
voice mail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain,
sleet, snow, ice and even heavy traffic can be
hazardous.
5. Do not take notes or look up phone numbers while
driving. Jotting down a “to do” list or flipping
through your address book takes attention away
from your primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car
will be stationary. If you need to make a call while
moving, dial only a few numbers, check the road
and your mirrors, then continue.
Health and safety information
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime.
But an important responsibility accompanies the
benefits of wireless phones, one that every user must
uphold.
113
Health and safety information
7. Do not engage in stressful or emotional
conversations that may be distracting. Make
people you are talking with aware you are driving
and suspend conversations that have the potential
to divert your attention from the road.
8. Use your wireless phone to call for help. Dial 9-1-1
or other local emergency number in the case of
fire, traffic accident or medical emergencies.
Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. If you see an auto accident, crime in
progress or other serious emergency where lives
are in danger, call 9-1-1 or other local emergency
number, as you would want others to do for you.
10. Call roadside assistance or a special nonemergency wireless assistance number when
necessary. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal, a
minor traffic accident where no one appears
injured, or a vehicle you know to be stolen, call
roadside assistance or other special nonemergency number.
114
“The wireless industry reminds you to use your
phone safely when driving.”
For more information, please call 1-888-901-SAFE, or
visit our web-site www.wow-com.com
Provided by the Cellular Telecommunications &
Internet Association
Operating Environment
Remember to follow any special regulations in force in
any area and always switch your phone off whenever it
is forbidden to use it, or when it may cause
interference or danger. When connecting the phone or
any accessory to another device, read its user's guide
for detailed safety instructions. Do not connect
incompatible products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation of
the equipment and for the safety of personnel, it is
recommended that the equipment should only be used
in the normal operating position (held to your ear with
the antenna pointing over your shoulder).
Using Your Phone Near Other Electronic
Devices
•
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against the
RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
These recommendations are consistent with the
independent research and recommendations of
Wireless Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone is
switched on.
• should not carry the phone in a breast pocket.
Health and safety information
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be maintained
between a wireless phone and a pacemaker to avoid
potential interference with the pacemaker.
should use the ear opposite the pacemaker to
minimize potential interference.
Hearing Aid Compatibility with Mobile Phones
When some mobile phones are used near some
hearing devices (hearing aids and cochlear implants),
users may detect a buzzing, humming, or whining
noise. Some hearing devices are more immune than
others to this interference noise, and phones also vary
in the amount of interference they generate.The
wireless telephone industry has developed ratings for
some of their mobile phones, to assist hearing device
users in finding phones that may be compatible with
their hearing devices. Not all phones have been rated.
Phones that are rated have the rating on their box or a
label on the box.
The ratings are not guarantees. Results will vary
depending on the user’s hearing device and hearing
loss. If your hearing device happens to be vulnerable
to interference, you may not be able to use a rated
115
Health and safety information
phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your
personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC
requirements and are likely to generate less
interference to hearing devices than phones that are
not labeled. M4 is the better/higher of the two ratings.
T-Ratings: Phones rated T3 or T4 meet FCC
requirements and are likely to be more usable with a
hearing device’s telecoil (“T Switch” or “Telephone
Switch”) than unrated phones. T4 is the better/higher
of the two ratings. (Note that not all hearing devices
have telecoils in them.)Hearing devices may also be
measured for immunity to this type of interference.
Your hearing device manufacturer or hearing health
professional may help you find results for your hearing
device. The more immune your hearing aid is, the less
likely you are to experience interference noise from
mobile phones.
116
Other Medical Devices
If you use any other personal medical devices, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information. Switch your phone off in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to
external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted
notices require you to do so.
Emergency Calls
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well as
user programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should
never rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants or where blasting operations
are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas (such
as propane or butane), areas where the air contains
chemicals or particles, such as grain, dust or metal
powders, and any other area where you would
normally be advised to turn off your vehicle engine.
Health and safety information
Potentially Explosive Environments
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not be
possible on all wireless phone networks or when
certain network services and/or phone features are in
use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 911 or other official
emergency number). Emergency numbers vary by
location.
3. Press
117
Health and safety information
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular service
provider.
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut
off the call until given permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed
to play with it because they could hurt themselves and
others, damage the phone or make calls that increase
your phone bill.
118
FCC Notice and Cautions
FCC Notice
• This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
• This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation.This equipment generates, uses and
can radiate radio frequency energy and,if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
The phone may cause TV or radio interference if
used in close proximity to receiving equipment. The
FCC can require you to stop using the phone if such
interference cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection
Standard (NFPA-58). For a copy of this standard, contact
the National Fire Protection Association, One Battery march
Park, Quincy, MA 02269, Attn: Publication Sales Division.
Health and safety information
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment
and receiver.
-Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV
technician for help
Cautions
Changes or modifications made in the radio phone, not
expressly approved by Samsung, will void the user’s authority
to operate the equipment.
Only use approved batteries, antennas andchargers.
The use of any unauthorized accessories may be dangerous
and void the phone warranty if said accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending or sitting on it.
119
Health and safety information
Other Important Safety Information
•
•
•
•
•
120
Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty installation
or service may be dangerous and may invalidate
any warranty applicable to the device.
Check regularly that all wireless phone equipment
in your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
Switch your phone off before boarding an aircraft.
The use of wireless phone in aircraft is illegal and
may be dangerous to the aircraft's operation.
•
Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends
on the signal strength in your area. Your phone
informs you of the current signal strength by
displaying a number of bars next to the signal strength
icon. The more bars displayed, the stronger the signal.
If you're inside a building, being near a window may
give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15
minutes of searching, a Power Save feature is
automatically activated. If your phone is active, it
periodically rechecks service availability or you can
check it yourself by pressing any key.
Anytime the Power Save feature is activated, a
message displays on the screen. When a signal is
found, your phone returns to standby mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and accessories.
Faulty service may void the warranty.
There are several simple guidelines to operating your
phone properly and maintaining safe, satisfactory
service.
• Hold the phone with the antenna raised, fullyextended and over your shoulder.
• Try not to hold, bend or twist the phone's antenna.
Don't use the phone if the antenna is damaged.
Speak directly into the phone's receiver.
Avoid exposing your phone and accessories to rain
or liquid spills. If your phone does get wet,
immediately turn the power off and remove the
battery. If it is inoperable, call Customer Care for
service.
Health and safety information
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and
receiver. When it's turned on, it receives and transmits
radio frequency (RF) signals. When you use your
phone, the system handling your call controls the
power level. This power can range from 0.006 watts to
0.2 watts in digital mode.
•
•
•
Availability of Various Features/Ring
Tones
Many services and features are network dependent
and may require additional subscription and/or usage
charges. Not all features are available for purchase or
use in all areas. Downloadable Ring Tones may be
available at an additional cost. Other conditions and
restrictions may apply. See your service provider for
additional information.
121
Health and safety information
Battery Standby and Talk Time
Standby and talk times will vary depending on phone
usage patterns and conditions. Battery power
consumption depends on factors such as network
configuration, signal strength, operating temperature,
features selected, frequency of calls, and voice, data,
and other application usage patterns.
•
•
Battery Precautions
•
•
•
•
122
Never use any charger or battery that is damaged
in any way.
Use the battery only for its intended purpose.
If you use the phone near the network's base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
Battery charging time depends on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
•
•
time) is noticeably shorter than normal, it is time
to buy a new battery.
If left unused, a fully charged battery will
discharge itself over time.
Use only Samsung-approved batteries and
recharge your battery only with Samsungapproved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than a
week, since overcharging may shorten its life.
Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and lifetime of the battery.
Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
•
•
•
•
•
•
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
•
Settings
•
Care and Maintenance
Keep the phone and all its parts and accessories
out of the reach of small children.
Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode electronic
circuits.
Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
Do not use or store the phone in dusty, dirty areas,
as its moving parts may be damaged.
Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit
boards.
Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
Health and safety information
•
Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between the
+ and - terminals of the battery (metal strips on
the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the
terminals may damage the battery or the object
causing the short-circuiting.
Dispose of used batteries in accordance with local
regulations. In some areas, the disposal of
batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion
batteries, contact your nearest Samsung
authorized service center. Always recycle. Do not
dispose of batteries in a fire.
123
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.4
Linearized : No
XMP Toolkit : 3.1-701
Producer : Acrobat Distiller 7.0 (Windows)
Create Date : 2006:06:30 13:40:11-04:00
Modify Date : 2006:06:30 13:40:33-04:00
Metadata Date : 2006:06:30 13:40:33-04:00
Creator Tool : PScript5.dll Version 5.2
Document ID : uuid:7DCFA9655F08DB11BB85ABB33864E300
Instance ID : uuid:e1a8b3b6-dff3-4b69-880a-3b3e7af4518b
Derived From Instance ID : uuid:925c856e-caef-401b-bfa1-bedec7b83b69
Derived From Document ID : uuid:609d7257-f56d-4ecf-9c59-66239e986683
Format : application/pdf
Title : PowerPoint í”„ë ˆì 테앴션
Creator : sec
Page Count : 126
Author : sec
EXIF Metadata provided by EXIF.tools
