Samsung Electronics Co SGHS400I Single-Band PCS GSM/ EDGE Phone with Bluetooth User Manual
Samsung Electronics Co Ltd Single-Band PCS GSM/ EDGE Phone with Bluetooth Users Manual
Users Manual
*
Depending on the software installed or your service provider or country,
some of the descriptions in this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear
different from the illustrations in this guide.
Printed in Korea
Code No.:GH68-XXXXXA
English. 10/2005. Rev 1.0.
World Wide Web
http://www.samsungmobile.com
SGH-S400i
User’s Guide
Draft_2nd
2005. 10. 18
(Version:S400ASEJ1)
Drive safely at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Important safety precautions
1
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Be aware of special regulations
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Emergency calls
Key in the emergency number for your present
location, then press .
Keep your phone away from small children
Keep the phone and all its parts, including accessories,
out of the reach of small children.
Accessories and batteries
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories could
damage your phone and may be dangerous.
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see "Health and
safety information" on page 86.
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
2
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful
attention to the subsequent information
regarding safety or phone features.
Indicates that you can get more information
on the referenced page.
→
Indicates that you need to press the
Navigation keys to scroll to the specified
option and then select it.
[ ] Indicates a key on the phone. For example,
[Centre]
< > Indicates a soft key, whose function is
displayed on the phone screen. For example,
<
Menu
>
• Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
Special
features of your phone
•Bluetooth
Send photos, images, videos, and
other personal data, and connect
to other devices using free,
wireless Bluetooth technology.
•Web browser
Access the wireless web to get up-
to-the-minute information and a
wide variety of media content.
3
Special features of your phone
• Phonebook
Store home, office, or cellular
phone numbers for your contacts.
• Get personal with photo or
video caller ID
See who’s calling you when their
very own photo or video displays.
• Name card
Create name cards with your
number and profile. Whenever
introducing yourself to others, use
this convenient electronic name
card.
• Multimedia Message Service (MMS)
Send and receive MMS messages with a
combination of text, image, video, and audio.
•E-mail
Send and receive e-mails with image, video, and
audio attachments.
•Java
Enjoy Java
™
-based embedded
games and download new games.
•Calendar
Keep track of your daily, weekly,
and monthly schedule.
• Voice recorder
Record memos or sounds.
4
Contents
Unpack 6
Make sure you have each item
Your phone 6
Buttons, features, and locations
Get started 7
First steps to operate your phone
Install and charge the phone ..................................... 7
Power on or off........................................................ 8
Keys and display ..................................................... 9
Access menu functions ............................................ 11
Customise your phone............................................. 12
Make/Answer calls .................................................. 14
Step outside the phone 15
Begin with your camera, messaging, and other special
features
Use camera............................................................ 15
Browse the web...................................................... 16
Use Phonebook ...................................................... 16
Send messages ...................................................... 17
View messages....................................................... 19
Use Bluetooth ........................................................ 19
Enter text 21
AB, T9, Number, and Symbol modes
Call functions 23
Advanced calling features
Menu functions 28
All menu options listed
Solve problems 84
Help and personal needs
Health and safety information 86
Index 93
5
Overview of menu functions
To access Menu mode, press [Centre] in Idle mode.
1 Call records
p.28
1 Current contacts
2 Missed calls
3 Dialled calls
4 Received calls
5 Delete all
6 Call time
7 Call cost
*
p.28
p.29
p.29
p.29
p.29
p.29
p.30
2 Phonebook
p.30
1 Contacts list
2 Add new contact
3 Group
4 Speed dial
5 My name card
6 Own number
7 Management
8 Service number
*
p.30
p.31
p.32
p.33
p.33
p.34
p.34
p.34
3 Applications
p.35
1 Java world
2 Voice recorder
3 World time
4 Alarm
5 PIM sync
6 Calculator
7 Converter
8 Timer
9 Stopwatch
0 SIM-AT*
p.35
p.35
p.36
p.37
p.37
p.38
p.39
p.39
p.39
p.40
4 Messages
p.40
1 Create message
2 My messages
3 Templates
4 Delete all
5 Settings
6 Memory status
p.40
p.41
p.44
p.45
p.45
p.46
5 i-mode
p.46
1 Menu
2 Mail
3 Java application
4 SMS
5 Bookmarks
6 Go to webpage
7 Saved pages
8 Settings
p.46
p.48
p.54
p.55
p.55
p.55
p.56
p.56
6 File manager
p.57
Images
Videos
Music
Sounds
Other files
Memory status
p.57
p.57
p.58
p.59
p.60
p.60
7 Calendar
p.61
8 Camera
p.65
9 Settings
p.71
1 Time & Date
2 Phone settings
3 Display settings
4 Sound settings
5 Network services
6 Bluetooth
7 Security
8 i-mode settings
9 Reset settings
p.71
p.72
p.73
p.74
p.75
p.78
p.81
p.82
p.83
* Shows only if supported by your
SIM card.
6
Unpack
Make sure you have each item
You can obtain various accessories from
your local Samsung dealer.
Phone Trav e l Char g er
Battery User’s Guide
The items supplied with your phone
and the accessories available at your
Samsung dealer may vary, depending
on your country or service provider.
Your phone
Buttons, features, and locations
Special
function keys
Earpiece
Display
Power on/off/
Menu exit key
Right soft key
Microphone
Navigation keys
(Up/Down/Left/
Right)
Menu access/
Confirm
(Centre) key
Cancel/Correct
key
Camera
lens
Flash
Left soft key Headset
jack
Volume keys
Dial key
Alphanumeric
keys
Mirror
7
Get started
First steps to operate your phone
SIM card information
When you subscribe to a cellular network, you receive
a plug-in SIM (Subscriber Identity Module) card
loaded with your subscription details, such as your
PIN, and available optional services.
Install and charge the phone
Remove the battery.
If the
phone is already
on, first turn it off by
holding
[]
.
Insert the SIM card.
Make sure that the gold-
coloured contacts on the
card face down into the
phone.
Install the battery.
Plug the travel charger
into the phone.
Plug the charger into a standard AC wall outlet.
The LED on the charger indicates the charging
progress:
• Red: the battery is being charged.
• Green: the battery is completely charged.
• Orange: the battery is not correctly plugged in
or is operating at a too high or too low
temperature.
8
Get started
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the battery low message displays, and
• the empty battery icon blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
Power on or off
When the phone is completely charged (green
charger LED), unplug the charger from the power
outlet.
Remove the charger from the phone.
Switch on
Do not turn on
the phone when
mobile phone
use is prohibited.
1. Open the phone.
2. Press and hold [ ] to turn on
the phone.
3. If necessary, enter the PIN and
press <
OK
>.
Switch off
1. Open the phone.
2. Press and hold [ ].
9
Get started
Keys and display
Keys
Perform the function indicated on the
bottom line of the display.
In Idle mode, access your favourite menus
directly.
p. 72
In Menu mode, scroll through menu options.
In Idle mode, enter Menu mode. Also,
launch the i-mode browser when held down.
In Menu mode, select the highlighted menu
option.
Delete characters from the display.
In Menu mode, return to the previous menu
level.
Send or answer a call.
In Idle mode, retrieve the recent numbers
dialled, missed, or received.
End a call.
Hold down to switch the phone on and off.
In Menu mode, cancel input and return the
phone to Idle mode.
Enter numbers, letters, and some special
characters.
In Idle mode, press and hold
[1]
to access
your voicemail server. Press and hold [
0
] to
enter an international call prefix.
Enter special characters.
In Idle mode, press and hold [
]
to
activate or deactivate Quiet mode. Press
and hold [ ] to enter a pause between
numbers.
(on the left)
Adjust the phone volume.
In Idle mode, with the phone open, adjust
the keypad tone volume. With the phone
closed, press and hold to turn on the
external display.
10
Get started
Display
Layout
Icons
*
Received signal strength
Call in progress
Out of your service area; you
cannot send or receive calls
New SMS message
New voicemail
Call diverting feature active
Text and graphics
display messages,
instructions, and
information you enter.
Soft key function
indicators
show the current functions
assigned to the two soft
keys.
Mail i-mode
Icons
display various icons.
Icons
(continued)
Bluetooth feature active
Connected to hands-free car kit or
headset
Synchronised with a PC
GPRS network
Roaming network
Home Zone, if you have registered
for the appropriate service
Call ringer set to vibrate
Mute mode, during a call
Quiet mode (Mute)
Quiet mode (Vibration)
Alarm set
11
Get started
Access menu functions
Icons
(continued)
New i-mail or i-MMS message:
• Grey: a new mail or message in
your phone; when a mail or
message is being downloaded,
the icon blinks
• Yellow: a new mail or message on
the i-mode centre
• Red: Inbox is full
i-mode active:
• Yellow: in a GPRS network
• Grey: in a GSM network
Connecting to i-mode
i-mode locked
Battery power level
* The icons shown on the display may vary, depending
on your country or service provider.
Use the soft
keys
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current role.
Press the left soft
key to access the
Mail
menu.
Press the right soft
key to access the
i-mode
menu.
Mail
i-mode
12
Get started
Customise your phone
Select an
option
1. Press the appropriate soft key.
2. Press the Navigation keys to
move to the next or previous
option.
3. Press <
Select
> or [Centre] to
confirm the function displayed
or option highlighted.
4. To exit, choose either of the
following methods.
• Press <
Back
> or [
C
] to
move up one level.
• Press [ ] to return to Idle
mode.
Use shortcuts
Press the number key
corresponding to the option you
want.
1. In Idle mode, press [Centre]
and select
Settings
→
Phone
settings
→
Language
.
2. Select a language.
1. In Idle mode, press [Centre]
and select
Settings
→
Sound
settings
→
Incoming call
→
Ringtone
.
2. Select a ringer category.
3. Select a ringer melody.
4. Press <
Save
>.
Display
language
Call ringer
melody
13
Get started
You can set wallpaper for the
display.
1. In Idle mode, press [Centre]
and select
Settings
→
Display
settings
→
Wallpaper
→
Main
display
.
2. Select an image category.
3. Select an image and press
<
Select
>.
4. Press <
Save
>.
You can change the colour for the
display components, such as title
bars and highlight bars.
1. In Idle mode, press [Centre]
and select
Settings
→
Display
settings
→
Skin
.
2. Select a colour pattern.
Idle mode
wallpaper
Menu mode
skin colour
You can switch the phone to Quiet
mode to avoid disturbing other
people with your phone sound.
Press and hold
[
]
in Idle mode.
You can use the Navigation keys as
shortcuts to access specific menus
directly from Idle mode.
1. In Idle mode, press [Centre]
and select
Settings
→
Phone
settings
→
Short cut
.
2. Scroll to a key.
3. Press <
Options
> and select
Change
.
4. Select a menu to be assigned to
the key.
Quiet mode
Menu
shortcuts
14
Get started
Make/Answer calls
You can protect the phone against
unauthorised use with a phone
password. The phone will require
the password on power-up.
1. In Idle mode, press [Centre]
and select
Settings
→
Security
→
Change
password
.
2. Enter the default password,
00000000
, and press <
OK
>.
3. Enter a new 4- to 8-digit
password and press <
OK
>.
4. Enter the new password again
and press <
OK
>.
5. Select
Phone lock
.
6. Select
Enable
.
7. Enter the password and press
<
OK
>.
Phone lock
1. In Idle mode, enter an area code
and phone number.
2. Press
[]
.
3. To end the call, press
[]
.
1. When the phone is ringing, press
[]
.
2. To end the call, press
[]
.
Press [ / ].
Make a call
Answer a call
Adjust the
volume during
a call
15
Step outside the phone
Begin with your camera, messaging, and other special
features
Use camera
1. In Idle mode, press [Centre]
and select
Camera
.
2. Adjust the image to be
captured.
3. Press [Centre] to take a photo.
The photo is saved
automatically.
4.
Pres
s <
Preview
> to
take
another photo.
1. In Capture mode, press <>
and select
Go to photos
.
2. Press [Left] or [Right] to select
a photo category.
3. Select the photo you want.
Take a photo
View a photo
1. In Idle mode, press [Centre]
and select
Camera
.
2. Press [
1
] to switch to Record
mode.
3. Press [Centre] to start
recording.
4. Press [Centre] to stop
recording. The video is saved
automatically.
5. Press <
Preview
> to record
another video.
1. In Record mode,
press
<>
and select
Go to videos
.
2. Press [Left] or [Right] to select
a video category.
3. Select the video you want.
Record a video
Play a video
16
Step outside the phone
Browse the web
Using the i-mode browser, you can get easy access to
the wireless web to get a variety of up-to-date
services and information and to enjoy downloads of
web content.
Use Phonebook
In Idle mode, press and hold
[Centre].
• To scroll through browser items,
press [Up] or [Down].
• To select an item, press
[Centre].
• To return to the previous page,
press [Left] or [
C
].
• To access browser options,
press <
Menu
>.
Launch the
browser
Navigate the
i-mode
browser
To the phone’s memory
1. In Idle mode, enter a phone
number and press <
Options
>.
2. Select
Save contact
→
Phone
→
a number type.
3. Specify contact information:
First name, Last name, Mobile,
Home, Office, Fax, Other, Email,
Caller ID, Ringtone, Group, and
Memo.
4. Press <
Save
> to save the
entry.
To th e SIM ca r d
1. In Idle mode, enter a phone
number and press <
Options
>.
2. Select
Save contact
→
SIM
.
3. Enter a name.
4. Press <
Save
> to save the
entry.
Add an entry
17
Step outside the phone
Send messages
1. In Idle mode, press [Centre]
and select
Phonebook
→
Contacts list
.
2. Select an entry.
3. Scroll to a number and press
[]
to dial, or press [Centre]
to edit contact information.
1. In Idle mode, press [Centre]
and select
Phonebook
→
My
name card
.
2. Specify your contact
information.
3. Press <
Save
> to save the
name card.
4. To send the name card to other
people, press <
Options
> and
select
Send
via bluetooth
.
Find an entry
Create and
send a name
card
1. In Idle mode, press [Centre]
and select
Messages
→
Create
message
.
2. Enter the message text.
3. Press <
Options
> and select
Save and send
or
Send only
.
4. Enter destination numbers.
5. Press [Centre] to send the
message.
Send a text
message (SMS)
18
Step outside the phone
1. In Idle mode, press <
Mail
>
and select
Create MMS
.
2. Select
Send
and then
Yes
.
3. Select the
To1
field.
4. Enter a destination number or
an e-mail address and press
[Centre].
5. Select the
Subject
field.
6. Enter the message subject and
press [Centre].
7. Select the
SMIL
field and add
media items.
8. When you finish, press
<
Send
>.
9. Select
Send
to send the
message.
Send a
multimedia
message
(i-MMS)
1. In Idle mode, press <
Mail
>
and select
Create mail
.
2. Select the
To1
field.
3. Enter an e-mail address and
press [Centre].
4. Select the
Subject
field.
5. Enter the e-mail subject and
press [Centre].
6. Select the
Message
field.
7. Enter the e-mail text and press
[Centre].
8. Select the
Attachment
field.
9. Add images, sounds, or videos.
10. Select
Send
to send the e-mail.
Send an e-mail
(i-mail)
19
Step outside the phone
View messages Use Bluetooth
Your phone is equipped with Bluetooth technology
which enables you to connect the phone wirelessly to
other Bluetooth devices and exchange data with them,
talk hands-free, or control the phone remotely.
When a notification appears:
1. Press <
View
>.
2. Select a message from the
Inbox.
From the Inbox:
1. In Idle mode, press [Centre]
and select
Messages
→
My
messages
→
Inbox
.
2. Select a message.
1. In Idle mode, press <
Mail
>
and select
Inbox
.
2. Select a message.
View a text
message
View an i-mail
or i-MMS
message
In Idle mode, press [Centre] and
select
Settings
→
Bluetooth
→
Activation
→
On
.
1. In Idle mode, press [Centre]
and select
Settings
→
Bluetooth
→
My devices
→
Search new device
.
2. Select a device.
3. Enter a Bluetooth PIN code or
the other device’s Bluetooth PIN
code, if it has one, and press
<
OK
>.
When the owner of the other
device enters the same code,
pairing is complete.
Turn on
Bluetooth
Search for and
pair with a
Bluetooth
device
20
Step outside the phone
1. Access an application,
Phonebook
,
File manager
, or
Calendar
.
2. Scroll to an item.
3. Press <
Options
> and select
Send
via
→
Bluetooth
, or
Send via bluetooth
.
4. Select a device.
5. If necessary, enter the
Bluetooth PIN and press <
OK
>.
To receive data via Bluetooth, your
phone’s Bluetooth feature must be
active.
If necessary, press <
Yes
> to
confirm the reception.
Send data
Receive data
21
Enter text
AB, T9, Number, and Symbol modes
You can enter text for some features such as
messaging, Phonebook, or Calendar, using AB mode,
T9 mode, Number mode, and Symbol mode.
Changing the text input mode
The text input mode indicator appears when the cursor
is in a text field.
• Press and hold [ ] to switch between T9 and AB
modes. Depending on your country, you may also
be able to access an input mode for your specific
language.
• Press [ ] to change case or switch to Number
mode.
• Press and hold [ ] to switch to Symbol mode.
Using AB mode
Press the appropriate key until the character you want
appears on the screen.
(Creating an SMS message with GSM-alphabet encoding)
Character in order displayed
Key Upper case Lower case
22
Enter text
Tips for using AB mode
• To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
• Press [ ] to insert a space.
• Press the Navigation keys to move the cursor.
•Press [
C
] to delete characters one by one. Press
and hold [
C
] to clear the display.
Using T9 mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
Entering a word in T9 mode
1. Press [
2
] to [
9
]
to start entering a word. Press
each key once for each letter.
For example, press [
4
], [
3
], [
5
], [
5
], and [
6
] to
enter Hello in T9 mode.
T9 predicts the word that you are typing, and it
may change with each key that you press.
2. Enter the whole word before editing or deleting
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [
0
] to display alternative word
choices for the keys that you have pressed.
For example, Of and Me use [
6
] and [
3
].
4. Press [ ] to insert a space and enter the next
word.
Tips for using T9 mode
• Press [
1
] to enter periods or apostrophes
automatically.
• Press [ ] to insert a space.
• Press the Navigation keys to move the cursor.
• Press [
C
] to delete characters one by one. Press
and hold [
C
] to clear the display.
Adding a new word to the T9 dictionary
This feature may not be available for some languages.
1. Enter the word that you want to add.
2. Press [
0
] to display alternative words for your key
presses. When there are no more alternative
words,
Add
appears on the bottom line.
23
3. Press <
Add
>.
4. Enter the word you want using AB mode and press
<
OK
>.
Using Number mode
Number mode enables you to enter numbers.
Press the keys corresponding to the digits you want.
Using Symbol mode
Symbol mode enables you to insert symbols.
Press and hold [ ] to enter Symbol mode.
Call functions
Advanced calling features
Making a call
1. In Idle mode, enter the area code and phone
number.
2. Press [ ].
Making an international call
1. In Idle mode, press and hold [
0
]. The
+
character
appears.
2. Enter the country code, area code, and phone
number, then press [ ].
To Press
display more symbols [Up] or [Down].
select a symbol the corresponding
number key.
clear the entered symbol(s) [
C
].
insert the symbol(s) <
OK
>.
• Press [
C
] to clear the last digit or press and hold
[
C
] to clear the whole display. You can move the
cursor to edit an incorrect digit.
• Press and hold [ ] to enter a pause between
numbers.
24
Call functions
Redialling recent numbers
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press [ ].
Making a call from Phonebook
Once you have stored a number in Phonebook, you
can dial the number by selecting it from
Phonebook.
p. 30
You can also use the speed dial feature to assign your
most frequently called numbers to specific number
keys.
p. 33
Dialling a number from the SIM card
1. In Idle mode, enter the location number for the
phone number you want and press [ ].
2. Press [Left] or [Right] to scroll through other
numbers.
3. Press <
Dial
> or [ ] to dial the number you want.
Ending a call
Close the phone or press [ ].
Answering a call
When you receive an incoming call, the phone rings
and displays the incoming call image.
Press <
Accept
> or [ ] to answer the call.
Tips for answering a call
• When
Anykey
answer
in the
Extra
settings
menu is active, you can press any key, except for
<
Reject
> and [ ].
p. 73
• Press <
Reject
> or [ ] to reject a call.
• Press and hold [ / ] to reject a call or mute the
ringer, depending on the
Volume key
setting.
p. 72
Viewing missed calls
If you have missed calls, the screen displays how
many calls you have missed.
1. Press <
View
>.
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
Call functions
25
Using the headset
Use the headset to make or answer calls without
holding the phone.
Connect the headset to the jack on the right side of
the phone.
The button on the headset works as listed below:
Options during a call
You can access a number of functions during a call.
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume during a call.
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
Placing a call on hold/Retrieving
Press <
Hold
> or <
Retrieve
> to place a call on hold
or retrieve the call.
Making a second call
You can make another call if your network supports it.
1. Press <
Hold
> to put the call on hold.
2. Make the second call in the normal way.
3. Press <
Swap
> to switch between the calls.
4. Press <
Options
> and select
End
held
call
to end
the call on hold.
5. To end the current call, press [ ].
Answering a second call
You can answer an incoming call while already on the
phone, if your network supports it and you have
activated the call waiting feature.
p. 77
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press <
Swap
> to switch between the calls.
To Press
redial the last call and hold the button twice.
answer a call the button.
end a call the button.
26
Call functions
3. Press <
Options
> and select
End
held
call
to end
the call on hold.
4. To end the current call, press [ ].
Transferring a call
You can transfer the currently active call to a caller on
hold, if your network supports it. With this option, the
two callers can talk to each other, but you are
disconnected from the call.
Press <
Options
> and select
Transfer
.
Using an external speaker
Use an optional external speaker to talk and listen
with the phone a short distance away. First, you must
plug a speaker into the phone.
Using a Bluetooth headset
Use an optional Bluetooth headset to talk on the
phone without holding the phone to your ear. To use
this feature, you first need to register your headset
and connect it to the phone.
p. 78
Press <
Options
> and select
Switch to headset
or
Switch to phone
.
Using the menu options
You can access Menu mode and use menu functions.
Press <
Options
> and select
Menu
.
Switching off the microphone
(Mute mode)
You can temporarily switch off your phone’s
microphone so that the person on the phone cannot
hear you.
Press <
Options
> and select
Mute
or
Unmute
.
Sending a sequence of DTMF tones
Dual tone multi-frequency (DTMF) tones are the tones
used in phones for tone dialling.
You can send DTMF tones as a group after entering the
entire number you need to send or retrieving a
number from Phonebook. This feature is helpful for
entering a password or an account number when you
call an automated system, like a banking service.
During a call, some menu functions are not
available.
Call functions
27
1. When connected with a teleservice system, press
<
Options
> and select
Send DTMF
.
2. Enter the number you need to send and press
<
OK
>.
Muting or sending key tones
You can turn the key tones off or on.
Press <
Options
> and select
Mute keys
or
Send
keys
.
Using Phonebook
You can access the
Phonebook
menu to locate or
store entries.
p. 30
Press <
Options
> and select
Phonebook
.
Using SIM services
The
SIM service
menu is available if you use a SIM
card in your phone. A SIM card provides services such
as news, weather, sports, entertainment, and location
services.
For details, see your SIM card instructions or contact
your service provider.
Making a multi-party call
Use this feature to allow as many as six people to join
a multi-party call, or conference call.
Your service provider must support multi-party calls
for you to use this feature.
Setting up a multi-party call
1. Call the first participant.
2. Call the second participant. The first call is
automatically put on hold.
3. Press <
Options
> and select
Join
. The first
participant is added to the multi-party call.
To communicate with answering machines or
computerised telephone systems,
Send keys
must
be selected.
28
4. If desired, call another person or answer an
incoming call.
5. Press <
Options
> and select
Join
.
6. Repeat steps 4 and 5 as desired.
Having a private conversation with one
participant
1. Press <
Options
> and select
Private
.
2. Select a name or number from the participant list.
You can talk privately with that person, while the
other participants converse with each other.
3. To return to the multi-party call, press <
Options
>
and select
Join
.
Disconnecting one participant
1. Press <
Options
> and select
Remove
.
2. Select a name or number from the participant list.
The participant is dropped from the call, but the
call continues with the other parties.
3. Close the phone or press [ ] to end the multi-
party call.
Menu functions
All menu options listed
Call records
(Menu 1)
Use this menu to view the calls you have dialled,
received, or missed, the length of your calls, and the
cost of your calls.
To access this menu, press [Centre] in Idle mode and
select
Call records
.
Current contacts
(Menu 1.1)
This menu displays the most recent calls dialled,
received, or missed.
Accessing a call record
1. Press [Left] or [Right] to select a call type.
2. Press [Up] or [Down] to scroll through the call list.
3. Press [Centre] to view details of a call, or [ ] to
dial a number.
Menu functions
Call records
(Menu 1)
29
Using call record options
While viewing the call list, press <
Options
> to access
the following options:
•
Detail
: view details of the selected call.
•
Paste
: edit the phone number.
•
Save contact
: save the number to Phonebook.
•
Send message
: send an SMS or i-MMS message.
•
Delete
: delete the selected call record or all call
records.
Missed calls
(Menu 1.2)
This menu displays the most recent calls that you did
not answer.
Dialled calls
(Menu 1.3)
This menu displays the most recent calls you have
dialled.
Received calls
(Menu 1.4)
This menu displays the most recent calls you have
received.
Delete all
(Menu 1.5)
Use this menu to delete all of the records in each call
type.
1. Press [Centre] to select the call types to be
cleared.
2. Press <
Delete
>.
3. Press <
Yes
> to confirm the deletion.
Call time
(Menu 1.6)
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
•
Last
call
time
: check the length of your last call.
•
Total
sent
: check the total length of all the calls
you have dialled.
30
Menu functions
•
Total
received
: check the total length of all the
calls you have received.
To reset the call timers, press <
Reset
>. You need to
enter the phone password.
Call cost
(Menu 1.7)
This network feature displays the cost of calls. This
menu is available only if your SIM card supports this
feature. Note that this is not intended to be used for
billing purposes.
•
Last
call
cost
: check the cost of your last call.
•
Total
cost
: check the total cost of all of your calls.
If the total cost exceeds the maximum cost set in
Set
max
cost
, you must reset the counter before
you can make another call.
•
Max
cost
: check the maximum cost limit set in
Set
max
cost
.
•
Reset
counters
: reset the cost counters.
•
Set
max
cost
: set the maximum cost authorised
for your calls.
•
Price/Unit
: set the price per unit that is applied
when the cost of your calls is calculated.
Phonebook
(Menu 2)
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Phonebook.
To access this menu, press [Centre] in Idle mode and
select
Phonebook
.
Contacts list
(Menu 2.1)
Use this menu to search for numbers in Phonebook.
Finding an entry
1. Enter the first few letters of the name that you
want to find.
2. Select the name you want from the list.
The password is preset to
00000000
. You can
change this password.
p. 82
Menu functions
Phonebook
(Menu 2)
31
3. Scroll to a number and press [ ] to dial, or press
[Centre] to edit contact information.
Using Phonebook options
While viewing the contact list or contact details, press
<
Options
> to access the following options:
•
View
: display details about the contact.
•
Edit
: edit contact information.
•
Send message
: send an SMS, i-mail, or i-MMS
message.
•
Add new contact
: add a new contact to
Phonebook.
•
Copy to
: copy the contact to the phone’s memory
or the SIM card.
•
Send via bluetooth
: send the contact via
Bluetooth.
•
Delete
: delete the selected contact or all contacts.
Add new contact
(Menu 2.2)
Use this menu to add a new contact to Phonebook.
Storing a number in the phone’s memory
1. Select
Phone
.
2. Change the settings or enter information about the
contact.
•
First name
/
Last name
: assign a name.
•
Mobile
/
Home
/
Office
/
Fax
/
Other
: add a
number in any category.
•
Email
: assign up to 3 e-mail addresses.
•
Caller ID
: assign an image as a caller ID
image to alert you to a call from the number.
•
Ringtone
: assign a ringer melody to alert you
to a call from the number.
•
Group
: assign the number to a caller group.
•
Memo
: add a memo about the person.
3. Press <
Save
> to save the contact.
32
Menu functions
Storing a number on the SIM card
1. Select
SIM
and enter a name.
2. Press [Down] and enter a phone number.
3. Press [Down] and change the location number, if
necessary.
4. Press <
Save
> to save the contact.
Group
(Menu 2.3)
Use this menu to organise your contacts in caller
groups.
Creating a new caller group
1. Press <
Options
> and select
Add
.
2. Enter a name for the group.
3. Select the Caller ID line and select an image.
4. Select the Ringtone line and select a melody.
5. Press <
Save
> to save the group.
Adding members to a caller group
1. Select a group.
2. Press <
Add
>. The list of contacts stored in your
phone’s memory is displayed.
3. Press [Centre] to select specific contacts you want
to add to the selected group and press <
Select
>.
4. To add more members, press <
Options
> and
select
Add
→
a contact.
5. Repeat step 4 as desired.
Managing caller groups
While viewing the group list, press <
Options
> to
access the following options:
•
View
: display the members of the selected group.
•
Add
: add a new group.
•
Edit
: change the properties of the selected group.
•
Send message
: send an SMS, i-mail, or i-MMS
message to the members you want.
To assign a caller ID image, ringtone, or group,
the contact must be saved to the phone’s
memory.
Menu functions
Phonebook
(Menu 2)
33
•
Delete
: delete the selected group or all groups.
Group members, however, are not deleted from
Phonebook.
Speed dial
(Menu 2.4)
Use this menu to assign a speed dial number (2 to 9)
for eight of your most frequently called numbers.
Assigning speed dial numbers
1. Select a key location from
2
to
9
. Key [
1
] is
reserved for your voicemail server.
2. Select a contact you want from the contact list.
3. Select a number, if the contact has more than one
number.
Managing speed dial entries
From the Speed dial screen, press <
Options
> to
access the following options:
•
Add
: assign a number to an unassigned key.
•
View
: check the name and number assigned to a
key.
•
Change
: assign a different number to a key.
•
Remove
: clear the speed dial setting for a key.
Dialling speed dial entries
Press and hold the appropriate key in Idle mode.
My name card
(Menu 2.5)
Use this menu to create a name card and send it to
other people.
Saving your name card
The procedure for creating your name card is the
same as the one for saving a phone number in the
phone’s memory.
p. 31
Using name card options
After saving your name card, press <
Options
> to
access the following options:
•
Edit
: edit the name card.
•
Send via bluetooth
: send the name card via
Bluetooth.
34
Menu functions
•
Exchange name card
: exchange name cards with
another person via Bluetooth.
•
Delete
: delete the name card.
Own number
(Menu 2.6)
Use this feature to check your phone numbers, or to
assign a name to each of the numbers. Changes made
here do not affect the actual subscriber numbers on
your SIM card.
Management
(Menu 2.7)
Use this menu to manage Phonebook.
•
Default saving
: select a default memory location
to save contacts.
If you select
Ask on saving
, the phone will ask
you to select a memory location when saving a
number.
•
Copy all to phone
: copy all of the contacts stored
on the SIM card to the phone’s memory.
•
Delete all
: delete all of the contacts from your
phone’s memory, your SIM card, or both.
1. Press [Centre] to select the locations to be
cleared.
2. Press <
Delete
>.
3. Enter the phone password and press <
OK
>.
4. Press <
Yes
> to confirm the deletion.
•
Memory status
: check the number of contacts
you have stored in the phone’s memory or on the
SIM card.
Service number
(Menu 2.8)
This menu is available if your SIM card supports
Service Dialling Numbers (SDN). Use this menu to
view the list of SDNs assigned by your service
provider, including emergency numbers, directory
enquiries, and voicemail numbers.
1. Scroll to the number you want and press <
View
>.
2. Press <
Dial
> or [ ].
The password is preset to
00000000
. You
can change this password.
p. 82
Menu functions
Applications
(Menu 3)
35
Applications
(Menu 3)
Use this menu to play Java games, to record voice
memos, to set time zones and alarms, or to use the
phone as a calculator, timer, or stopwatch. You can
also synchronise Phonebook or calendar data in the
phone’s memory with a computer.
To access this menu, press [Centre] in Idle mode and
select
Applications
.
Java world
(Menu 3.1)
Use this menu to access the list of the applications you
have downloaded from the wireless web.
p. 54
Voice recorder
(Menu 3.2)
Use this menu to record voice memos.
Recording a voice memo
1. Press [Centre] to start recording.
2. Speak into the microphone.
Press [Centre] to pause or resume the recording.
3. Press <
Stop
> or [Down] to end recording. The
voice memo is saved automatically.
4. Press [Up] to record another voice memo, or press
<
Options
> to access the following options:
•
Play
: play back your voice memo.
•
Record
: record another voice memo.
•
Go to voice list
: display the voice memo list.
•
Send via
: send the voice memo via i-mail,
i-MMS, or Bluetooth.
•
Delete
: delete the voice memo.
•
Rename
: change the name of the voice memo.
•
Protection
: protect the voice memo from
being deleted.
•
Properties
: access the properties of the voice
memo.
Playing a voice memo
1. From the Voice recorder screen, press <
Options
>
and select
Go to voice list
.
2. Select a voice memo. The memo plays.
36
Menu functions
During playback, use the following keys:
Using voice memo options
From the Voice recorder screen, press <
Options
> to
access the following options:
•
Record
: record a new voice memo.
•
Go to voice list
: go to the list of the voice memos
you have recorded.
•
Setting
: select a recording time setting.
Limit for message
: record a voice memo for
adding to an i-mail or i-MMS message.
Max record time
: record a voice memo for the
maximum recording time.
World time
(Menu 3.3)
Use this menu to set your local time zone and find out
what time it is in another part of the world.
Setting your local time zone
1. From the world map, press [Left] or [Right] to
select the city that corresponds to your home time
zone. As the time line moves, the time and date of
the given zone display.
2. Press <
Options
> and select
Save
to save the
time zone.
Applying Daylight Savings Time
1. From the world map, press <
Options
> and select
Set daylight saving time
.
2. Press [Centre] to select the time zones you want.
3. Press <
Save
>.
Keys Function
Centre Pauses or resumes playback.
Left Moves backward.
Right Moves forward.
Down Stops playback.
/ Adjusts the volume.
Menu functions
Applications
(Menu 3)
37
Alarm
(Menu 3.4)
Use this menu to set an alarm to ring at a specific
time.
Setting an alarm
1. Select the type of alarm.
2. Press [Left] or [Right] to select
On
on the
Alarm
line and press [Down].
3. Enter the time for the alarm to sound and press
[Down].
4. Select
AM
or
PM
in 12-hour time format and press
[Down].
5. Select a repeat option.
6. Select the
Alarm tone
line and select an alarm
melody.
7. Press <
Save
>.
Stopping an alarm
• When an alarm sounds, press any key.
• When a wake-up call alarm sounds, press
<
Confirm
> or [Centre].
Press any key, except <
Confirm
> and [Centre], to
cause it to sound again after 5 minutes. You can do
this a maximum of 5 times.
Setting the alarm to ring even if the phone is
off
From the Alarm screen, select
Auto power
→
On
.
If the phone is off when it is time for the alarm to ring,
the phone is switched on and sounds the alarm.
PIM sync
(Menu 3.5)
Use this menu to synchronise personal data with
corresponding PC applications via the optional
WideSync program.
Creating a synchronisation profile
1. Press <
Add
>.
2. Specify the following information for the profile:
•
Profile name
: enter the profile name.
•
Sync category
: select the applications you
want to synchronise.
38
Menu functions
•
Sync type
: select a synchronisation type.
•
Sync protocol
: select a connection method.
3. Press <
Save
> to save the profile.
Starting synchronisation
1. Make sure that your PC has MS Outlook and the
WideSync program installed, and the phone and
the PC are connected by a USB cable or an active
Bluetooth connection.
2. Open MS Outlook.
3. From the PIM sync screen, select a profile.
4. Press [Centre].
Using synchronisation options
From the PIM sync screen, press <
Options
> to access
the following options:
•
Start sync
: start a synchronisation for the
selected profile.
•
View result
: show the result of the last
synchronisation.
•
New sync profile
: add a new profile.
•
Edit sync profile
: change the properties of the
profile.
•
Delete
: delete the selected profile or all profiles.
Calculator
(Menu 3.6)
Use this menu to perform basic arithmetic functions,
such as addition, subtraction, multiplication, and
division.
1. Enter the first number.
•Press <
.()
> to insert a decimal point or
bracket.
• Press [ ] or [ ] to move the cursor.
2. Press one of the Navigation keys to access the
math function you want.
3. Enter the second number.
4. Press [Centre] to view the result.
5. If necessary, repeat from step 2 to continue the
calculation.
Menu functions
Applications
(Menu 3)
39
Converter
(Menu 3.7)
Use this menu for common conversions, such as
currency and temperature.
1. Select a converter.
2. Press [Left] or [Right] to select the original unit
and press [Down].
3. Enter the value to be converted and press [Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to above
zero (+) or below zero (-).
4. Press [Left] or [Right] to select the unit you want
to convert to.
The equivalent value for the amount you entered
displays.
Timer
(Menu 3.8)
Use this menu to set a period of time for the phone to
count down. The phone will sound an alarm when the
specified period of time has expired.
Starting the timer
1. Press <
Set
>.
2. Enter the length of time you want to count down
and press <
OK
>.
3. Press [Centre] to start counting down.
Stopping the timer
• Press any key when the timer rings.
• Press [Centre] on the Timer screen to stop the
timer before it rings.
Stopwatch
(Menu 3.9)
Use this menu to measure elapsed time. The precision
of the stopwatch is one one-hundredth of a second.
The maximum measurement time is 10 hours.
1. Press [Centre] to start the stopwatch.
For the currency converter, you can view and set
up the rates by pressing <
View rate
>.
40
Menu functions
2. Press [Centre] to check an interval. You can repeat
this step for a total of 4 intervals.
3. To reset the stopwatch, press <
Reset
>.
SIM-AT
(Menu 3.0)
This menu is available if you use a SIM AT card that
supports SIM Application Tool kit menus and provides
additional services, such as news, weather, sports,
entertainment, and location services. Available
services may vary, depending on your service
provider’s plans. For details, see your SIM card
instructions or contact your service provider.
Messages
(Menu 4)
Use the
Messages
menu to send and receive text
messages. You can also use the cell broadcast
message feature.
To access this menu, press [Centre] in Idle mode and
select
Messages
.
Create message
(Menu 4.1)
Short Message Service (SMS) allows you to send or
receive text messages that may include pictures,
animated images, and melodies.
1. Enter your message.
2. Press <
Options
> to access one of the following
options:
•
Save and send
: both save a copy of the
message and send the message.
•
Send only
: send the message.
•
Insert
: add a template, Phonebook entry, or
bookmark.
•
Add picture
/
Add animation
/
Add melody
:
attach a picture, an animated image, or a
melody.
•
Save to
: save the message in the
Drafts
box
or one of the folders you have created.
The maximum number of characters allowed in a
text message varies by service provider. If your
message exceeds the maximum number of
characters, the phone will split the message.
Menu functions
Messages
(Menu 4)
41
•
Language select
: change the language used
in T9 input mode.
•
Text style
: change the text attributes.
•
Input method
: change the text input mode.
3. When you have finished, press <
Options
> and
select
Save and send
or
Send only
.
4. Enter a destination number.
To send the message to more than one recipient,
press [Down] and fill in additional destination
fields.
5. Press [Centre] to send the message.
My messages
(Menu 4.2)
Use this menu to store all of the messages you have
received, sent, or failed to send.
Inbox
(Menu 4.2.1)
This folder stores all of the messages you have
received.
Viewing a message at the time of its receipt
When a message has been received, the phone alerts
you by:
• Displaying a message icon with text notification
• Sounding a tone or vibrating, depending on the
message alert setting.
To read a message immediately, press <
View
> and
select a message from the Inbox.
Viewing a message in Inbox
The following icons may appear on the message list;
depending on the message type or status, icons may
vary:
• SMS
• CB messages
• Delivery report for your sent messages
• According to the DRM (Digital Rights
Management) system, messages having web
content may not be able to be forwarded. They are
indicated by the icon.
• A icon next to a message means that a message
is of high priority. A grey-coloured message icon is
of low priority.
42
Menu functions
While viewing the message list, press <
Options
> to
access the following options:
•
View
: open the message.
•
Delete
: delete the message.
•
Move to My folder
: move the message to one of
the folders you have created in the
My folders
menu.
•
Sort by
: change the sort order of the messages.
•
Protection
: protect the message from being
deleted.
Using message options
While viewing a message, press <
Options
> to access
the following options:
SMS messages
•
Reply
: reply to the sender via SMS, i-mail, or
i-MMS message.
•
Forward
: forward the message to other people.
•
Delete
: delete the message.
•
Move to phone
/
Move to SIM
: move the
message between the SIM card and the phone’s
memory.
•
Cut
address
: extract URLs, e-mail addresses, or
phone numbers from the message.
•
Cut media
: save media content from the message
into your phone’s memory.
•
Protection
: protect the message from being
deleted. You can protect only those messages
stored in the phone’s memory.
CB messages
•
Save
: save the message to the phone’s memory.
•
Cut address
: extract URL, e-mail addresses, or
phone numbers from the message.
•
Delete
: delete the message.
Delivery report messages
•
Cut address
: extract URL, e-mail addresses, or
phone numbers from the message.
•
Delete
: delete the message.
Menu functions
Messages
(Menu 4)
43
•
Protection
: protect the message from being
deleted.
Drafts
(Menu 4.2.2)
This folder stores text messages you have saved to
send at a later time.
Press <
Options
> to access the following options:
•
Edit
: edit the message.
•
Delete
: delete the message or all messages.
•
Move to My folder
: move the message to one of
the folders you have created in the
My folders
menu.
•
Sort by
: change the sort order of the messages.
•
Protection
: protect the message from being
deleted.
Outbox
(Menu 4.2.3)
This folder stores text messages that the phone has
failed to send. The icon tells the status of failed
messages.
While viewing a message or the message list, press
<
Options
> to access the following options:
•
View
: display the message.
•
Delete
: delete the message or all messages.
•
Move to My folder
: move the message to one of
the folders you have created in the
My folders
menu.
•
Sort by
: change the sort order of the messages.
•
Send again
: send the message.
•
Forward
: forward the message to other people.
•
Cut address
: extract URL, e-mail addresses, or
phone numbers from the message.
•
Protection
: protect the message from being
deleted.
Sent
(Menu 4.2.4)
This folder stores text messages that you have sent.
While viewing a message or from the message list,
press <
Options
> to access the following options:
•
View
: open the message.
44
Menu functions
•
Delete
: delete the message or all messages.
•
Move to My folder
: move the message to one of
the folders you have created in the
My folders
menu.
•
Sort by
: change the sort order of the messages.
•
Forward
: forward the message to other people.
•
Cut address
: extract URL, e-mail addresses, or
phone numbers from the message.
•
Protection
: protect the message from being
deleted.
My folders
(Menu 4.2.5)
Use this menu to create new folders and store and
organise your messages.
Creating a new folder
1. Press <
Yes
>.
2. Enter a folder name and press <
OK
>.
Using folder options
On the folder list, press <
Options
> to access the
following options:
•
Open
: open the folder.
•
Add folder
: add a new folder.
•
Rename folder
: change the name of the folder.
•
Delete
: delete the selected folder.
Templates
(Menu 4.3)
Use this menu to make and use templates of
frequently used messages.
Creating a text template
1. Select an empty location.
2. Enter a message and press <
OK
>.
Using template options
From the template list, press <
Options
> to access
the following options:
•
Edit
: edit the template.
Menu functions
Messages
(Menu 4)
45
•
Send message
: send a new message using the
template.
•
Delete
: delete the template.
•
Add new
: add a new template.
Delete all
(Menu 4.4)
Use this menu to delete messages in each message
folder one by one, or all at once. You can also delete
all messages in all folders at one time.
Settings
(Menu 4.5)
Use this menu to set up various options for using the
messaging service.
Text message
(Menu 4.5.1)
You can configure default SMS settings for sending or
receiving messages.
•
Send settings
: set up the following options for
sending a text message:
Reply path
: allow the recipient to reply to you
through your message centre.
Delivery report
: set the network to inform you
when your message has been delivered.
Character support
: select a character encoding
type. If you select
Automatic
, the phone switches
the encoding type from GSM-alphabet to Unicode if
you enter an Unicode character. Use of Unicode
encoding will reduce the maximum number of
characters in a message to about half. If this menu
is not shown, your phone provides the Automatic
character encoding by default.
Bearer selection
: select either
GSM
or
GPRS
preferred
, depending on your network.
•
Current profile
: select a profile.
•
Profile settings
: set the following properties in a
profile:
Service centre
: store or change the number of
your message centre.
Default destination
: enter the default
destination. It will be displayed in the first field on
the Recipients field.
46
Menu functions
Default type
: set the default message type. The
network can convert the messages into the
selected format.
Default validity
: set the length of time your
messages are stored in the SMS centre.
Setting name
: enter a profile name.
Broadcast
(Menu 4.5.2)
You can change the settings for receiving CB
messages. The following options are available:
•
Receive
: select the reception of CB messages.
•
Channel list
: indicate the channels from which
you wish to receive CB messages. Please contact
your service provider for further details.
•
Language
: select the preferred languages in
which broadcast messages display.
Memory status
(Menu 4.6)
Use this menu to view the maximum memory and
available memory for text messages and broadcast
messages. You can also view the memory currently in
use in each folder.
i-mode
(Menu 5)
In this menu, you can use the i-mode browser, send or
receive i-mode mail and MMS message, and access
Java applications.
To access this menu, press [Centre] in Idle mode and
select
i-mode
. You can also quickly access this menu
by pressing <
i-mode
> in Idle mode.
Menu
(Menu 5.1)
Use this menu to access the main menu of the i-mode.
About i-mode
In i-mode, browse through your favourite magazines,
book tickets and hotels for your vacations, find your
favourite club, download the best ringtones and games
at the lowest price, send live e-mails with
photographs. You can do all of these economically
since with i-mode you are charged by the amount of
data you send and receive, not by the length of time
you are on-line.
You can quickly launch the browser by pressing and
holding [Centre] in Idle mode
.
Menu functions
i-mode
(Menu 5)
47
Navigating the i-mode browser
Using browser options
Various options are available when you are using the
i-mode browser. Press <
Menu
> to access the
following options:
•
Add bookmark
: add a bookmark for the current
web page.
•
Bookmarks
: access the bookmark list.
•
Save image
: save an image from the current web
page.
•
Save page
: save the current web page.
•
Add to phonebook
: save the selected phone
number or e-mail address to your Phonebook.
•
Certificate info
: access the server certificate of
the current web page, if the page is an SSL
(Secure Sockets Layer) page.
•
Go to webpage
: enter a URL address or select
one from the Address history list.
•
Reload
: update the current web page.
•
Page info
: view the URL address of the current
web page.
•
Create message
: send the URL address of the
current page to other people via i-mail.
Exiting the i-mode browser
To exit the browser at any time, press the [ ].
To Press
scroll through browser items [Up] or [Down].
select an item
[
Centre
]
.
return to the previous page [Left] or [
C
].
• Key operations on an i-mode screen depend on
the screen contents at that time.
• You can answer a call while using the i-mode
feature. After ending the call, the display returns
to the function screen you were using.
48
Menu functions
Mail
(Menu 5.2)
Use this menu to use i-mail and i-MMS message
services.
Create mail
(Menu 5.2.1)
You can create and send a message, attaching various
types of media files.
Creating and sending an i-mail
1. Select the
To1
field.
2. Enter an e-mail address and press
[
Centre
]
.
3. Select the
Subject
field.
4. Enter the mail subject and press
[
Centre
]
.
5. Select the
Message
field.
6. Enter the mail text and press
[
Centre
]
.
To insert pictograms into text, press <
Options
>
and select
Pictographic
.
You can use the copy and paste feature to quickly
and easily enter text.
p. 49
7. Select the
Attachment
field.
8. Add image, sound, or video files.
9. Select
Send
to send the mail.
Using mail options
While creating a mail, press <
Menu
> access the
following options:
•
Send
: send the mail.
•
Save
: save the mail to the Draft box.
•
Attach image
: attach an image file to the mail.
•
Attach melody
: attach a sound file to the mail.
•
Attach video
: attach a video file to the mail.
•
Delete attachment
: delete an attached file.
•
Play/View file
: play or view an attached file.
•
Open phonebook
: retrieve an e-mail address
from Phonebook.
•
Add To
: add To addresses.
•
Add Cc
: add Cc addresses.
You can quickly access this menu by pressing
<
Mail
> in Idle mode.
Depending on the field selected on the mail screen,
available options may vary.
Menu functions
i-mode
(Menu 5)
49
•
Add Bcc
: add Bcc addresses.
•
Change to To
: change a Cc or Bcc address to a To
address.
•
Change to Cc
: change a To or Bcc address to a Cc
address.
•
Change to Bcc
: change a To or Cc address to a
Bcc address.
•
Del. address
: delete the selected address.
•
Attach header
: attach a header, as specified in
the
Edit header
option of the Mail settings.
•
Attach sign.
: attach your signature, as specified
in the
Edit signature
option of the Mail settings.
•
Del. message
: delete the mail text.
•
Del. mail
: delete the mail.
Copying and pasting text
1. While entering text in a mail or message, place the
cursor where you wish by using the Navigation
keys.
2. Press <
Options
> and select
Copy
messages
.
3. Press <
Copy on
>.
4. Highlight the text as you want pressing the
Navigation keys and press
[
Centre
]
.
5. Select
Copy
or
Copy all
to copy all text.
To cut the selected text, select
Cut
.
6. Press <
Options
> and select
Paste
to paste the
copied text.
Create MMS
(Menu 5.2.2)
Multimedia Message Service (MMS) delivers messages
containing a combination of text, image, video, and
audio, from phone to phone or from phone to e-mail.
Creating and sending an i-MMS message
1. On the Compose menu list, select
Send
→
Yes
.
2. Select the
To1
field.
3. Enter a phone number or an e-mail address and
press
[
Centre
]
.
4. Select the
Subject
field.
You cannot add media contents you have bought on
the Internet to an SMIL slide.
50
Menu functions
5. Enter the subject of your message and press
[
Centre
]
.
6. Select the
SMIL
field.
7. Use the following options to create an SMIL slide:
•
Add media
: add media items, such as images,
sounds, or videos, including text.
•
Delete media
: delete the selected media item.
•
Play audio
: play the selected sound file.
•
Send
: send the message.
•
Save
: save the message into the
Draft
box.
•
Preview
: view the message slide you have
composed.
•
Add slide
: add a new slide after the last slide.
Once you have added slides, you can scroll
between them by pressing [Left] or [Right].
•
Delete slide
: delete the selected slide.
•
Text colour
: select a colour for the message
text.
•
Background colour
: select a colour for the
slide background.
•
Set Fit mode
: select the size in which the
image displays.
Hidden
: the image displays in its actual size.
Fill
: the image is scaled to fit into the display
area.
Meet
: the image is scaled so that the longer
side, either the height or width, fits the
corresponding side of the display area.
Slice
: the image is scaled so that the shorter
side, either the height or width, fits the
corresponding side of the display area.
•
Options
: change the display time for each
item in the message, such as a slide, text, an
image, or an audio clip.
•
Resize region
: change the size of the image
area. Press [Up] or [Down] to move the border
line.
•
Switch positions
: switch the order of the
image and text.
Depending on the field selected on the mail screen,
available options may vary.
Menu functions
i-mode
(Menu 5)
51
•
Previous slide
: move to the previous slide.
•
Next slide
: move to the next slide.
8. When you finish, press <
Send
>.
9. Select
Send
to send the message.
Using message options
While creating an i-MMS message, you can access a
variety of options by pressing <
Menu
>.
p. 48
Inbox
(Menu 5.2.3)
Use this menu to access i-mails and i-MMS messages
you have received.
While viewing a message, press <
Menu
> to access
the following options:
•
Reply
: send a reply to the sender.
•
Reply quoted
: send a reply with the message
included.
•
Reply all
: send a reply to the sender and all of the
recipients of the message.
•
Reply quoted all
: send a reply to the sender and
all of the recipients with the message included.
•
Forward
: forward the message to another person.
If the message contains media content you have
bought on the Internet, forwarding is not available.
•
Delete
: delete the current message.
•
Save address
: save the sender’s address to
Phonebook.
•
Add to phonebook
: save a phone number and an
e-mail address in the text into Phonebook.
•
Create message
: create a new message.
•
Save melody
: save the melody attached to the
message.
•
Save attachment
: save the attached melody and
image file.
•
Copy message
:
copy the content of the message.
•
Copy subject
: copy the subject of the message.
•
Copy address
: copy the address of the message.
When the Inbox reaches its maximum limit, new
i-mails or i-MMS messages will overwrite old
messages that have already been read.
52
Menu functions
•
Play SMIL
: play the SMIL slides of an MMS
message.
•
Browse SMIL
: display the SMIL slides in Edit
mode.
•
Protect On/Off
: protect the message from being
deleted.
On the message list, press <
Menu
> to access the
following options:
•
Show all
: display all received messages.
•
Show unread
: display only unread messages.
•
Show read
: display only viewed messages.
•
Show protect.
: display only protected messages.
•
Delete one
: delete the selected message.
•
Delete read mail
: delete all viewed messages,
except protected ones.
•
Delete all
: delete all messages.
•
Delete all + Pr.
: delete all messages including
protected ones.
•
Title sort
: sort messages by title.
•
Address sort
: sort messages by address.
•
Date sort
: sort messages by date.
Sent message
(Menu 5.2.4)
Use this menu to access the i-mails and i-MMS
messages you have sent.
While viewing a message, press <
Menu
> to access
the following options:
•
Re-edit
: change the message and then send it.
•
Delete
: delete the current message.
•
Save address
: save a recipient’s address to
Phonebook.
•
Add to phonebook
: save a phone number or an
e-mail address in the text to Phonebook.
•
Create message
: create a new message.
•
Copy message
:
copy the content of the message.
•
Copy subject
: copy the subject of the message.
•
Play SMIL
: play the SMIL slides of an MMS
message.
When the Sent message box reaches its maximum
limit, new i-mails or i-MMS messages will overwrite
old messages that have already been read.
Menu functions
i-mode
(Menu 5)
53
•
Browse SMIL
: display the SMIL slides in Edit
mode.
•
Protect On/Off
: protect the message from being
deleted.
On the message list, press <
Menu
> to access the
following options:
•
Title sort
: sort messages by title.
•
Address sort
: sort messages by address.
•
Date sort
: sort messages by date.
•
Delete one
: delete the selected message.
•
Delete all
: delete all messages.
•
Delete all + Pr.
: delete all messages including
protected ones.
Draft
(Menu 5.2.5)
Use this menu to access i-mails and i-MMS messages
you have saved or failed to send.
On the message list, press <
Menu
> to access the
following options:
•
Delete one
: delete the selected message.
•
Delete all
: delete all messages.
Selective retrieval
(Menu 5.2.6)
Use this menu to select which parts of messages you
want to retrieve from the server, such as the sender’s
address, subject, or message text.
Check new mail
(Menu 5.2.7)
Use this menu to check the i-mode centre for new
i-mails and i-MMS messages and then retrieve them to
the phone.
Mail settings
(Menu 5.2.8)
Use this menu to change the various settings for
sending and receiving i-mails and i-MMS messages.
•
Edit header
: enter a mail header to be inserted at
the start of your mail text. If you select
Auto
attach
, the header will be automatically inserted
into all of your outgoing messages.
When the Draft box reaches its maximum limit, new
mails or MMS messages will overwrite old messages
that have already been read.
54
Menu functions
•
Edit signature
: enter a tag line to be inserted at
the end of your mail text. If you select
Auto
attach
, the signature will be automatically
inserted into all of your outgoing messages.
•
Reply marker
: set a marker to be inserted at the
start of the text when you send a reply.
•
Auto play
: set a melody or an SMIL slide to be
automatically played when you open a message.
•
Auto reception
: set the phone to retrieve new
messages from the server at the time of their
receipt.
•
Receive attachment
: select types of attachments
you want to receive.
•
Attachment data
: receive MFi files attached to
messages.
•
Check settings
: check your current mail settings.
•
Back
: exit the
Mail settings
menu and return to
the previous menu level.
Mailbox status
(Menu 5.2.9)
Use this menu to check the total amount of memory
available and the amount of memory currently in use
in each message box.
Back
(Menu 5.2.0)
Use this menu to exit the
Mail
menu.
Java application
(Menu 5.3)
You can download and play games and MIDlets (Java
applications that run on mobile phones) from various
sources using the i-mode browser, and store them on
your phone.
On the applications list, press <
Menu
> to access the
following Java system options:
•
Description Setting
: set whether or not the
description of an application is displayed before
downloading.
•
Delete All
: delete all Java applications.
•
Storage Status
: check the amount of memory
being used and the memory remaining for storing
Java applications.
Menu functions
i-mode
(Menu 5)
55
•
Trace Info.
: view trace information for a Java
application.
•
About
: view the version and copyright information
of the Java VM on your phone.
On the applications list, press <
Options
> to access
the following application options:
•
Properties
: view the properties of the application.
•
Upgrade
: update the selected application.
•
Delete
: delete the application.
•
Network Connection
: select whether or not the
application connects to the network when it runs, if
the selected one is an online application.
•
Auto Start Setting
: select whether or not the
application launches automatically when selected.
SMS
(Menu 5.4)
Use this menu to access the
Messages
menu
directly.
p. 40
Bookmarks
(Menu 5.5)
Use this menu to access URL addresses of websites
you have bookmarked while navigating the wireless
web.
Press <
Menu
> to access the following options:
•
Open
: display the bookmarked page.
•
Copy address
: copy the URL address of the
bookmark.
•
Edit title
: change the title of the bookmark.
•
Create message
: send the bookmark via
message.
•
Delete one
: delete the selected bookmark.
•
Delete all
: delete all bookmarks.
Go to webpage
(Menu 5.6)
Use this menu to access a specific website by
manually entering a URL address or selecting one from
the Address history list.
Depending on the type of application selected,
available options may vary.
56
Menu functions
Saved pages
(Menu 5.7)
Use this menu to access the list of the web pages you
have saved.
While viewing a page, press <
Menu
> to access the
following options:
•
Save image
: save an image on the page.
•
Edit title
: change the title of the page.
•
Certificate info
: access the server certificate of
the page.
•
Page info
: view the URL address of the page.
•
Protect On/Off
: protect the page from being
deleted.
•
Delete
: delete the page.
On the page list, press <
Menu
> to access the
following options:
•
Open
: open the selected page.
•
Edit title
: change the title of the currently
selected page.
•
Protect On/Off
: protect the currently selected
page from being deleted.
•
Delete one
: delete the selected page.
•
Delete all
: delete all saved pages.
•
Delete all + Pr.
: delete all saved pages including
protected ones.
Settings
(Menu 5.8)
Use this menu to change the settings for browser
connections and display.
•
Set time out
: set the phone to disconnect from
the network after a specified length of time of
inactivity.
•
Load images
: set whether or not the phone
displays images on web pages.
•
Wrap text
: set whether the phone wraps text on
web pages to fit your phone’s display, or displays
text as it is on the web page.
•
Certificates
: view the list of server certificates
you have received while navigating the wireless
web, or switch the selected certificate from valid to
invalid, or vice versa.
Menu functions
File manager
(Menu 6)
57
•
Send terminal info
: set whether or not the phone
sends its information to the web server while
navigating the wireless web.
•
Video auto play
: set whether or not the phone
automatically plays videos after download.
•
Check settings
: check your current settings.
•
Back
: exit the
Settings
menu and return to the
previous menu level.
File manager
(Menu 6)
The
File manager
menu allows you to access images,
videos, music, and sound files stored in the phone’s
memory.
To access this menu, press [Centre] in Idle mode and
select
File manager
.
Images
This menu displays photos you have taken and images
downloaded or received in messages.
Viewing an image
1. Select an image folder.
2. Scroll to an image and press [Centre].
Using image options
While viewing an image or the image list, press
<
Options
> to access the options.
p. 68
Videos
This menu displays video clips you have recorded,
downloaded, or received in messages.
Playing a video clip
1. Select a video folder.
2. Scroll to a clip and press [Centre].
p. 70
According to the DRM (Digital Rights Management)
system, web content may not be able to be
forwarded. The content is indicated by the icon.
Video clips recorded on other devices, such as
camcorders, may not play correctly.
58
Menu functions
Using video options
While viewing the video list, press <
Options
> to
access the options.
•
Play
: play the selected file.
•
Send via
: send the file via i-mail, i-MMS, or
Bluetooth.
•
Set as
: set the video clip as your wallpaper for the
idle screen, as a caller ID image for a Phonebook
entry, or as a ringtone.
•
Delete
: delete the selected file or all files.
•
Rename
: change the file name.
•
Move to Favourite videos
: move the file to the
Favourite videos
folder.
•
Move to Video clips
: move the file to the
Video
clips
folder.
•
Move to Downloaded videos
: move the file to
the
Downloaded videos
folder.
•
Share for bluetooth
: set whether or not to
prevent this file from being accessed from other
Bluetooth devices.
•
Protection
: protect the file from being deleted.
•
Properties
: access the file properties.
Music
This menu displays AAC, M4A files you have
downloaded, received in messages, or imported from
your computer.
Playing a music file
Scroll to a file and press [Centre].
During playback, use the following keys:
Key Function
Centre Pauses or resumes playback.
Left Moves back to the previous file.
Right Skips to the next file.
Down Stops playback.
/ Adjusts the volume level.
1
Turns 3D sound on or off.
Menu functions
File manager
(Menu 6)
59
Using music options
While playing music files or viewing the music list,
press <
Options
> to access the following options:
•
Play
/
Pause
: begin or pause playback.
•
Send via bluetooth
: send the file via Bluetooth.
•
Setting
: change the default settings for playing
music files.
Repeat mode
: select a repeat mode.
Shuffle
: set the music player to play music at
random.
Equalizer
: select an equaliser setting.
3D sound
: turn 3D sound on or off.
Skin
: select a skin type.
Volume
: select a volume level.
•
Set as
: set the file as your ringtone or as a
ringtone for a Phonebook entry.
•
Delete
: delete the selected file or all files.
•
Rename
: change the file name.
•
Share for bluetooth
: set whether or not to
prevent this file from being accessed from other
Bluetooth devices.
•
Protection
: protect the file from being deleted.
•
Properties
: access the file properties.
Sounds
This menu displays sound files you have recorded,
downloaded, or received in messages.
Playing a sound clip
1. Select a sound folder.
2. Scroll to a clip and press [Centre].
p. 36
Using sound options
While viewing the sound list, press <
Options
> to
access the following options:
•
Play
: play the sound file.
2
Changes the skin type.
3
Changes the repeat mode.
4
Changes the equaliser mode.
Key Function
60
Menu functions
•
Send via
: send the file via i-mail, i-MMS, or
Bluetooth.
•
Set as
: set the file as your ringtone or as a
ringtone for a Phonebook entry.
•
Delete
: delete the selected file or all files.
•
Rename
: change the file name.
•
Move to Favourite sounds
: move the file to the
Favourite sounds
folder.
•
Move to Voice list
: move the file to the
Voice
list
folder.
•
Move to Downloaded sounds
: move the file to
the
Downloaded sounds
folder.
•
Share for bluetooth
: set whether or not to
prevent this file from being accessed from other
Bluetooth devices.
•
Protection
: protect the file from being deleted.
•
Properties
: access the file properties.
Other files
Files that you have received but which are not
supported by your phone are stored in this folder. You
cannot open these files on the phone. Unsupported file
formats include *.doc, *.ppt, and *.txt.
While viewing the file list, press <
Options
> to access
the following options:
•
Send via bluetooth
: send the file via Bluetooth.
•
Delete
: delete the selected file or all files.
•
Rename
: change the name of the file.
•
Share for bluetooth
: set whether or not to
prevent this file from being accessed from other
Bluetooth devices.
•
Protection
: protect the file from being deleted.
•
Properties
: access the file properties.
Memory status
Use this menu to view the maximum memory and
available memory in terms of both size and number of
media items. You can also view the amount of memory
in use in each media folder.
Menu functions
Calendar
(Menu 7)
61
Calendar
(Menu 7)
The calendar feature enables you to keep track of your
schedule and to-do list, to view missed alarm events,
and to make a memo.
To access this menu, press [Centre] in Idle mode and
select
Calendar
.
Consulting the calendar
When you enter the
Calendar
menu, the calendar in
Month view appears with today’s date indicated by a
blue box.
The number of events for the specific day appears at
the bottom of the calendar. The following icons
indicate the type of event:
Press <
Options
> to access the following options:
•
View mode
: change the view mode of the
calendar.
•
Create
: add a new event.
•
Go to
: go to the current date or enter a specific
date.
•
Sort by
: sort items by the type of event.
•
Delete
: delete items stored on the calendar by
using various deleting options.
•
Missed alarm events
: view events whose alarms
you have missed.
•
Memory status
: view the memory status for
items stored in the phone’s memory.
Creating an event
You can schedule up to 400 events on the calendar,
and schedule more than one event per day.
Entering a new scheduled event
1. Scroll to a date on the calendar.
2. Press <
Options
> and select
Create
→
Schedule
.
• Scheduled event • Anniversary
• To do item • Memo
You can delete recurring events in Day view only.
62
Menu functions
3. Enter information or change the settings in the
following entry fields:
•
Subject
: enter the title of the event.
•
Details
: enter event details.
•
Start date
and
Start time
: enter the starting
date and time for the event.
•
AM/PM
: select
AM
or
PM
in 12-hour time
format.
•
End date
and
End time
: enter the ending date
and time for the event.
•
AM/PM
: select
AM
or
PM
in 12-hour time
format.
•
Location
: enter information about the event
location.
•
Alarm
: set an alarm for the event.
•
Before
: set how long before the event the
alarm is to alert you.
•
Alarm tone
: select an alarm tone.
•
Repeat
: set the event to recur and a repeat
unit.
•
Until
: if the event will recur, set the ending
date.
4. Press <
Save
> to save the event.
Entering a new anniversary
1. Select a date on the calendar.
2. Press <
Options
> and select
Create
→
Anniversary
.
3. Enter information or change the settings in the
following entry fields:
•
Occasion
: enter information about the
anniversary.
•
Date
: enter the date.
•
Alarm
: set an alarm for the anniversary.
•
Before
: set how long before the event the
alarm is to alert you.
•
Alarm time
: enter the time for the alarm to
sound.
•
AM/PM
: select
AM
or
PM
in 12-hour time
format.
•
Alarm tone
: select an alarm tone.
Menu functions
Calendar
(Menu 7)
63
•
Repeat every year
: set the phone to remind
you of the anniversary every year.
4. Press <
Save
> to save the event.
Entering a memo
1. Select a date on the calendar.
2. Press <
Options
> and select
Create
→
Memo
.
3. Enter a memo and press <
Save
>.
Entering a To do item
1. Select a date on the calendar.
2. Press <
Options
> and select
Create
→
To do
.
3. Enter information or change the settings in the
following entry fields:
•
To do
: enter information about the item.
•
Start date
: enter the starting date.
•
Due date
: enter the ending date.
•
Select priority
: select a priority level.
4. Press <
Save
> to save the event.
Viewing an event
Square brackets on a calendar date indicate the
following type of events scheduled for that day:
1. Select a date on the calendar to display the events
for the day.
2. Select an event to view its details.
While viewing an event or the event list, press
<
Options
> to access the following options:
•
View
: display the event details.
•
Edit
: edit the event.
•
Create
: add a new event.
•
Send via bluetooth
: send the event via
Bluetooth.
•
View mode
: change the view mode of the
calendar.
•
Sort by
: sort items by the type of event.
• Blue: scheduled event • Orange: anniversary
• Red: To do item • Green: memo
64
Menu functions
•
Delete
: delete items stored on the calendar by
using various deleting options.
•
Missed alarm events
: view events whose alarms
you have missed.
•
Memory status
: view the memory status for
items stored in the phone’s memory.
Viewing an event in different mode
By default, the calendar appears in Month view mode.
Press <
Options
> and select
View mode
to change
the mode.
Day view
You can view events for the selected date.
Select an event to view its details.
The following icons will be displayed according to the
event’s type and status:
• Alarm set
• Recurring event
• Completed To do item
• To do item priority; its colour indicates the
priority level (Red: high, Blue: normal, and
Grey: low)
Week view
You can view events (only for items stored for
Schedule) for the selected week.
A cell on the timetable indicates the presence of event
information.
Select the cell that contains the event you want.
Viewing a
missed alarm event
When you are unable to acknowledge an alarm, the
phone displays a missed alarm notification.
• Press <
View
> to view the corresponding event.
• Press <
Exit
>.
Accessing missed event alarm
1. Press <
Options
> and select
Missed alarm
events
.
2. Select an event.
3. Press <
Confirm
> to confirm and delete the event.
Menu functions
Camera
(Menu 8)
65
Using missed alarm options
From the event list, press <
Options
> to access the
following options:
•
View
: display the event details.
•
Delete
: delete the event.
•
Delete all
: delete all events.
Camera
(Menu 8)
You can use the camera module embedded in your
phone to take photos and record videos.
To access this menu, press [Centre] in Idle mode and
select
Camera
.
Taking a photo
You can take photos in various modes using the
phone. The camera produces JPEG photos.
1. Access the
Camera
menu to turn on the camera.
The image to be captured appears on the display.
2. Adjust the image to be captured.
•Press <> to access camera options.
next section
• Use the keypad to change the camera settings
or switch to other modes.
p. 66
3. Press [
Centre]
to take a photo. The photo is saved
in the
Photos
folder.
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are
not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
When you take a photo in direct sunlight or in bright
conditions, shadows may appear on the photo.
4.
To Press
use photo options <
Options
>.
p. 67
return to Capture mode <
Preview
>.
66
Menu functions
Using camera options in Capture mode
In Capture mode, press <> to access the following
options:
•
Record video
: switch to Record mode.
•
Shooting mode
: take a photo in the following
modes:
Single shot
: take a photo in normal mode. You
can select whether or not the camera automatically
saves a photo.
Multi shot
: take a series of action stills. You can
select the number of photos the camera will take
and the shooting speed.
Mosaic shot
: take several stills and save them in
one frame. You can select the layout.
•
Effects
: change the colour tone or apply a special
effect to photos to be taken in normal mode.
•
Frames
: apply a decorative frame to photos to be
taken in normal mode.
•
Flash
: determine the use of the flash.
•
Timer
: set a time delay before the camera takes a
photo.
•
Go to photos
: access to the
Photos
folder.
•
Settings
: change the default settings for taking a
photo.
Size
: select an image size.
Quality
: select an image quality setting.
Viewfinder mode
: select a preview screen.
Shutter sound
: select the sound that you hear
when you press the shutter release, [
Centre]
.
•
Short cuts
: view the functions of the keys you can
use in Capture mode.
Using the keypad in Capture mode
You can use the keypad to customise your camera
settings in Capture mode.
Key Function
Flips the image vertically.
Shows the mirror image.
Menu functions
Camera
(Menu 8)
67
Using photo options
After saving a photo, press <
Options
> to access the
following options:
•
View
: access one of the multi-shot photos.
•
Take another
: return to Capture mode.
•
Send via
: send the file via i-mail, i-MMS, or
Bluetooth.
•
Set as
: set the photo as your wallpaper for the
display or as a caller ID image for a Phonebook
entry.
•
Delete
: delete the file.
•
Rename
: change the file name.
•
Go to photos
: access the
Photos
folder.
•
Protection
: protect the file from being deleted.
•
Properties
: access the file properties.
Viewing a photo
1. In Capture mode, press <> and select
Go to
photos
.
2. Scroll to a photo and press [Centre].
Up/Down Zooms in or out.
Left/Right Adjusts the image brightness.
1
Switches to Record mode.
p. 68
2
Changes the image size.
3
Changes the image quality.
4
Changes the camera mode.
5
Changes the colour tone or applies a
special effect to a photo.
6
Reduces the distortion on the image to
maximise detail and sharpness.
7
Selects a decorative frame.
8
Sets the timer.
9
Goes to the
Photos
folder.
0
Determines the use of the flash.
Changes the preview screen.
Key Function
68
Menu functions
While viewing a photo or the photo list, press
<
Options
> to access the following options:
•
List
: return the screen to the photo list.
•
View
: view the file on the full screen.
•
Send via
: send the file via i-mail, i-MMS, or
Bluetooth.
•
Set as
: set the photo as your wallpaper for the
display or as a caller ID image for a Phonebook
entry.
•
Delete
: delete the file or all files.
•
Rename
: change the file name.
•
Move to Favourite images
: move the file to the
Favourite images
folder.
•
Slide show
: display all files in turn as a slide
show. You can select the rate at which the photos
cycle.
•
Share for bluetooth
: set whether or not to
prevent this file from being accessed from other
Bluetooth devices.
•
Protection
: protect the file from being deleted.
•
Properties
: access the file properties.
Recording a video
You can record a video of what is displayed on the
camera screen and save it.
1. In Capture mode, press [
1
].
2. Adjust the image to be captured.
•Press <> to access camera options.
next section
• Use the keypad to change the camera settings
or switch to other modes.
p. 69
3. Press [
Centre]
to start recording.
4. Press [
Centre]
or < > to stop recording. The
video is automatically saved in the
Video clips
folder.
5.
To Press
play back the video clip [Centre].
use video options <
Options
>.
p. 70
return to Record mode <
Preview
>.
Menu functions
Camera
(Menu 8)
69
Using camera options in Record mode
In Record mode, press <> to access the following
options:
•
Take photo
: switch to Capture mode.
•
Effects
: change the colour tone or apply a special
effect to a video.
•
Flash
: determine the use of the flash.
•
Timer
: set a time delay before the camera starts
recording.
•
Go to videos
: access the
Video clips
folder.
•
Settings
: change the following settings for
recording a video:
Recording mode
: select a video recording mode.
Select
Limit for
message
to record a video
suitable for an i-mail or i-MMS message. The video
clip is saved in 3GP format.
Select
Normal
to record a video within the limit of
the currently available memory.
Size
: select a frame size.
Video quality
: select an image quality setting.
Screen mode
: select a preview screen.
Audio record
: record audio with a video clip.
•
Short cuts
: view the functions of the keys you can
use in Record mode.
Using the keypad in Record mode
You can use the keypad to customise your camera
settings in Record mode:
Keys Function
Flips the image vertically.
Shows the mirror image.
Up/Down Zooms in or out.
Left/Right Adjusts the image brightness.
1
Switches to Capture mode.
p. 65
2
Changes the frame size.
3
Changes the image quality.
4
Changes the video recording mode.
70
Menu functions
Using video options
After saving a video clip, press <
Options
> to access
the following options:
•
Record another
: return to Record mode.
•
Send via
: send the file via i-mail, i-MMS, or
Bluetooth.
•
Set as
: set the video clip as your wallpaper for the
idle screen, as a caller ID image for a Phonebook
entry, or as a ringtone.
•
Delete
: delete the file.
•
Rename
: change the file name.
•
Go to videos
: access the
Video clips
folder.
•
Protection
: protect the file from being deleted.
•
Properties
: access the file properties.
Playing a video clip
1. In Record mode, press <> and select
Go to
videos
.
2. Scroll to a video clip and press [Centre].
During playback, use the following keys on the
display:
5
Changes the colour tone or applies a
special effect to a video image.
6
Reduces the distortion on the image to
maximise detail and sharpness.
7
Mutes or unmutes the audio.
8
Sets the timer.
9
Goes to the
Video clips
folder.
0
Determines the use of the flash.
Changes the preview screen.
Keys Function
Keys Function
Centre Pauses or resumes playback.
Left Moves backward through a file.
Right Moves forward through a file.
Menu functions
Settings
(Menu 9)
71
3. Press <
Options
> to access the following options:
•
List
: return to the video clip list.
•
Send via
: send the file via i-mail, i-MMS, or
Bluetooth.
•
Set as
: set the video clip as your wallpaper for
the idle screen, as a caller ID image for a
Phonebook entry, or as a ringtone.
•
Delete
: delete the file.
•
Rename
: change the file name.
•
Move to Favourite videos
: move the file to
the
Favourite videos
folder.
•
Share for bluetooth
: set whether or not to
prevent this file from being accessed from
other Bluetooth devices.
•
Protection
: protect the file from being
deleted.
•
Properties
: access the file properties.
Settings
(Menu 9)
Use this menu to customise your phone settings. You
can also reset the settings to their default values.
To access this menu, press [Centre] in Idle mode and
select
Settings
.
Time & Date
(Menu 9.1)
Use this menu to change the time and date displayed
on your phone. Before setting the time and date,
specify your time zone in the
World time
menu.
p. 36
•
Set time
: enter the current time.
•
AM/PM
: select
AM
or
PM
in 12-hour time format.
•
Time format
: select a time format.
•
Set date
: enter the current date.
•
Starting day of calendar
: set which day of the
week the calendar starts with.
/ Adjusts the volume.
Down Stops playback.
Keys Function
72
Menu functions
Phone settings
(Menu 9.2)
Many different features of your phone’s system can be
customised to suit your preferences.
Language
(Menu 9.2.1)
Use this menu to select one of several languages for
the display text.
Greeting message
(Menu 9.2.2)
Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
Slide settings
(Menu 9.2.3)
Use this menu to set how the phone reacts when you
open it for an incoming call, and when you close it
while using a function.
•
Up
: set whether or not to answer a call by opening
the phone.
•
Down
: set whether or not the phone maintains
the menu you are using when you close the phone.
Short cut
(Menu 9.2.4)
You can use the Navigation keys as shortcuts to access
specific menus directly from Idle mode. Use this menu
to assign a shortcut to a key.
Assigning a shortcut menu
1. Scroll to a key to be used as a shortcut key.
2. Press <
Options
> and select
Change
.
3. Select a menu to be assigned to the key.
Using shortcut options
Press <
Options
> to access the following options:
•
Change
: assign or change a shortcut menu.
•
Remove
: deactivate the shortcut assignment to
the selected key.
•
Remove all
: deactivate all shortcut assignments.
Volume key
(Menu 9.2.5)
Use this menu to set how the Volume key acts when a
call comes in.
•
Silence
: mute the ringer by holding down the key.
When you set
Down
to
Continue operation
,
the keypad lock works just in Idle mode.
Menu functions
Settings
(Menu 9)
73
•
Reject
: allow you to reject calls by holding down
the key.
Extra settings
(Menu 9.2.6)
You can turn the automatic redialling or answering
feature on or off.
•
Auto redial
: set the phone to make up to ten
attempts to redial a phone number after an
unsuccessful call.
•
Anykey
answer
: answer an incoming call by
pressing any key, except <
Reject
>
and
[].
When this option is not selected, you must press
<
Accept
> or [ ] to answer a call.
Display settings
(Menu 9.3)
Use this menu to change settings for the display and
lights.
Wallpaper
(Menu 9.3.1)
You can set up the idle screen on both displays.
•
Main display
: select an image or a video clip to
be displayed on the display.
•
Text position
: select a text position on the
display. If you don’t want to display text in Idle
mode, select
Off
.
•
Text mode
: select a text mode.
•
Text colour
: select a text colour.
•
Graphic logo
: set the phone to display a graphic
icon instead of service provider's logo on the idle
screen. This is only available if a graphic icon has
been received in a message.
Skin
(Menu 9.3.2)
You can select a skin colour for Menu mode.
LCD brightness
(Menu 9.3.3)
You can adjust the brightness of the display for
varying lighting conditions.
Back light
(Menu 9.3.4)
You can select the length of time the backlight stays
on and the display is on in Dim mode, in which the
backlight is off.
74
Menu functions
•
Main LCD on
: select the length of time the
backlight is on.
•
Main LCD dim
: select the length of time the
display is in Dim mode after the backlight turns off.
After a specified time, the display turns off.
Dialling font colour
(Menu 9.3.5)
Use this menu to select a font colour for the numbers
entered while dialling.
Service light
(Menu 9.3.6)
The service LED on the external keypad blinks to
indicate the service status. Use this menu to activate
or deactivate the feature of the service light.
Sound settings
(Menu 9.4)
Use this menu to customise various sound settings.
Incoming call
(Menu 9.4.1)
Use this menu to select a volume and alert type for
incoming calls.
•
Ringtone
: select a ringtone for the call ringer.
•
Volume
: select a ringer volume.
•
Alert type
: specify how you are to be informed of
incoming calls.
Melody
: the phone rings using the selected
ringtone.
Vibration
: the phone vibrates but not rings.
Vibration then melody
: the phone vibrates three
times and then starts ringing.
Keypad tone
(Menu 9.4.2)
Use this menu to select the tone that the phone
sounds when you press a key.
Message tone
(Menu 9.4.3)
Use this menu to set up the ringer for incoming SMS
messages, i-mails and i-MMS messages, and CB
messages.
•
Tone
: select one of several message tones.
You can adjust the keypad tone volume using
[ / ] in Idle mode.
Menu functions
Settings
(Menu 9)
75
•
Alert type
: specify how you are to be informed of
any incoming messages.
•
Repetition
: specify how often the phone informs
you of a new message.
Power on/off
(Menu 9.4.4)
Use this menu to select the melody that the phone
plays when it is switched on or off.
Slide tone
(Menu 9.4.5)
Use this menu to select the tone that the phone
sounds when you open or close the phone.
Quiet mode
(Menu 9.4.6)
Use this menu to set how the phone acts to alert you
to a specific event in Quiet mode, instead of making
sounds.
•
Vibration
: set the phone to vibrate.
•
Mute
: mute all sound settings.
Extra tones
(Menu 9.4.7)
Use this menu to customise additional tones for the
phone.
•
Minute
minder
: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
•
Connection
tone
: set the phone to beep when an
outgoing call is connected to the system.
•
Alert on call
: set the phone to beep when you
receive a new message or when the time for an
alarm comes during a call.
•
Error
tone
: set the phone to beep when you have
made a mistake or something wrong happens on
the phone.
Network services
(Menu 9.5)
Use this menu to access network services. Please
contact your service provider to check their availability
and subscribe to them, if you wish.
76
Menu functions
Call diverting
(Menu 9.5.1)
This network service reroutes incoming calls to a
phone number that you specify.
1. Select a call diverting option:
•
Divert always
: divert all calls.
•
Busy
: divert calls when you are on another
call.
•
No
reply
: divert calls when you do not answer
the phone.
•
Unreachable
: divert calls when you are not in
an area covered by your service provider or
when your phone is switched off.
•
Cancel
all
: cancel all call diverting options.
2. Select the type of calls to be diverted.
3. To activate call diverting, select
Activate
.
Otherwise, select
Deactivate
.
4. Move to the
Divert to
line.
5. Enter the number to which calls are to be diverted
and press <
Select
>.
6. If you selected
No reply
, move to the
Seconds
line and select the length of time the network
delays before diverting a call.
Call barring
(Menu 9.5.2)
This network service allows you to restrict your calls.
1. Select a call barring option:
•
All
outgoing
: prohibit outgoing calls.
•
International
: prohibit international calls.
•
International
except
home
: only allow calls
to numbers within the current country when
you are abroad, and to your home country.
•
All
incoming
: prohibit incoming calls.
•
Incoming
while
abroad
: prohibit incoming
calls when you use your phone outside of your
home country.
•
Cancel
all
: cancel call barring settings,
allowing calls to be sent and received normally.
•
Change barring password
: change the call
barring password obtained from your service
provider.
Menu functions
Settings
(Menu 9)
77
2. Select the type of calls to be barred.
3. Select
Activate
. To deactivate call barring, select
Deactivate
.
4. Enter the call barring password supplied by your
service provider and press <
Select
>.
Call waiting
(Menu 9.5.3)
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which call waiting option
will apply.
2. Select
Activate
and press <
Select
>.
To deactivate call waiting, select
Deactivate
.
Network selection
(Menu 9.5.4)
This network service allows you to either automatically
or manually select the network to be used while
roaming outside of your home area.
You can select a network other than your home
network only if there is a valid roaming agreement
between the two.
•
Automatic
: connect to the first available network
when roaming.
•
Manual
: select the network you want.
Caller ID
(Menu 9.5.5)
This network service allows you to prevent your phone
number from being displayed on the phone of the
person being called. However, some networks do not
allow the user to change this setting.
•
Default
: use the default setting provided by the
network.
•
Hide
number
: ensure your number does not
display on the other person’s phone.
•
Send
number
: send your number each time you
make a call.
Voice mail server
(Menu 9.5.6)
Use this menu to store the number of the voicemail
server and access your voicemails.
You must enter the voice server number before you
can access your voicemails. Your service provider
can give the voice server number.
78
Menu functions
•
Connect to voice server
: connect to the
voicemail server to allow you to listen to your
messages. You can also connect to the voicemail
server by pressing and holding [
1
] in Idle mode.
•
Voice server number
: enter the voicemail server
number.
Closed user group
(Menu 9.5.7)
Use this menu to set incoming and outgoing calls to be
restricted to a selected user group. For details about
how to create a closed user group, contact your
service provider.
•
Index list
: add, delete, or activate CUG index
numbers. Press <
Options
> to access the options
for setting up an index list.
•
Outside access
: enable calls to numbers other
than those in the Closed user group. This feature
depends on the nature of your CUG subscription.
•
Default group
: enable the default CUG, if you
have set one with your service provider. When
making a call, you are given the option of using
your default CUG, instead of selecting one from the
list.
•
Deactivate
: deactivate the CUG function, if the
default group is enabled or a CUG index is
selected.
Band selection
(Menu 9.5.8)
For the phone to make and receive phone calls, it
must register with an available network. Your phone
can handle any of the following types of networks:
GSM 1900 and Combined GSM 900/1800.
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you may need to change to an
appropriate band.
When you select a new band, your phone
automatically searches for all available networks. Your
phone registers with a preferred network within the
band.
Bluetooth
(Menu 9.6)
Using the Bluetooth feature, you can connect the
phone wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or control
the phone remotely.
Menu functions
Settings
(Menu 9)
79
Bluetooth technology allows free wireless connections
between all Bluetooth-compliant devices within a
range of 10 meters. Since the devices communicate
using radio waves, they do not need to be in line of
sight to each other.
Setting up the Bluetooth feature
The
Bluetooth
menu provides the following options:
•
Activation
: activate or deactivate the Bluetooth
feature.
•
My devices
: search for connectable Bluetooth
devices.
•
My phone’s visibility
: allow other Bluetooth
devices to search for your phone.
•
My phone’s name
: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
•
Secure mode
: determine if the phone asks for
your confirmation when other devices access your
data.
•
Bluetooth services
: display available Bluetooth
services.
Searching for and pairing with a Bluetooth
device
1. From the Bluetooth setting options, select
My
devices
.
2. Select
Search new device
.
If you have searched for devices before, the phone
displays
More devices
along with the devices you
have searched for previously. To search for new
devices, select
More devices
.
After searching, a list of devices to which you can
connect displays. The following icons indicate the
kind of device:
• If there are obstacles between the devices, the
operating distance may be reduced.
• It is recommended that you don’t use the
Bluetooth feature while using multimedia features,
such as voice recorder, camera, or vice versa for
better performance.
• Some devices may not be compatible with your
phone.
80
Menu functions
The colour of the icon indicates the status of the
the device:
• Grey for unpaired devices
• Blue for paired devices
• Red for devices that are currently connected to
your phone
3. Select a device.
4. Enter a Bluetooth PIN code and press <
OK
>.
This
code is used just once and you don’t need to
memorise it.
When the owner of the other device enters the
same code, pairing is complete.
Using device options
1. From the device list, scroll to a device you want.
2. If your phone didn’t find Bluetooth services for the
selected device, press <
Select
>.
3. Press <
Options
> to access the following options:
•
Connect
: connect to the currently selected
device.
•
Disconnect
: end the connection with the
device.
•
Browse files
: search for data from the device
and import data directly to your phone.
•
Service list
: refresh the Bluetooth service list.
•
Rename
: rename the paired device.
•
Authorise device
/
Unauthorised device
:
determine whether or not the phone asks you
to permit connection when other devices try to
connect to your phone.
•
Delete
: delete the device or all devices.
• Hands-free car kit
or headset
• Mobile phone
• Computer • PDA
• Printer • Unknown device
Some devices, especially headsets or hands-free car
kits, may have a fixed Bluetooth PIN, such as
0000
.
If the other device has a code, you must enter it.
Options may vary depending on the paired
device.
Menu functions
Settings
(Menu 9)
81
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item you want
to send is stored.
3. Scroll to the item you want and press <
Options
>.
4. Select
Send
via
→
Bluetooth
, or
Send via
bluetooth
.
The phone searches for devices within range and
displays a list of available devices.
5. Select a device.
6. If necessary, enter the Bluetooth PIN needed for
pairing and press <
OK
>.
Receiving data via Bluetooth
To receive data via Bluetooth, your phone’s Bluetooth
feature must be active.
1. If an unauthorised Bluetooth device sends data to
your phone, press <
Yes
> to allow the device to
access your phone.
2. Press <
Yes
> to receive data.
Security
(Menu 9.7)
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
PIN check
(Menu 9.7.1)
The 4- to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
Change PIN
(Menu 9.7.2)
Use this menu to change your PIN. The PIN check
feature must be enabled to use this feature.
Received image, video, and sound files are stored in
the corresponding download folder in
File manager
.
If you enter an incorrect PIN/PIN2 three times in
succession, the SIM card is blocked. To unblock it
you need to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are supplied by your
network operator.
82
Menu functions
Phone lock
(Menu 9.7.3)
This feature locks the phone from unauthorised use.
When this feature is enabled, you must enter a 4- to
8-digit phone password each time the phone is
switched on.
The password is preset to
00000000
. To change the
password, use the
Change password
menu.
Change password
(Menu 9.7.4)
Use this menu to change your phone password.
Privacy
(Menu 9.7.5)
Use this menu to lock all menu functions on the
phone, except for call functions.
When this feature is enabled, you must enter the
phone password to access menu functions.
SIM lock
(Menu 9.7.6)
The SIM lock feature allows your phone to work only
with the current SIM by assigning a SIM lock code. You
must enter the SIM lock code to use a different SIM
card.
FDN mode
(Menu 9.7.7)
If supported by your SIM card, Fixed Dialling Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored on
the SIM card.
Change PIN2
(Menu 9.7.8)
If supported by your SIM card, the change PIN2
feature changes your current PIN2.
i-mode lock
(Menu 9.7.9)
Use this menu to lock or unlock the
i-mode
menu.
You must enter the phone password to enable this
feature.
i-mode settings
(Menu 9.8)
Use this menu to create and customise the i-mode
profiles containing the settings for connecting your
phone to the network. You need these settings to use
the web browser or send i-mail or i-MMS message.
Menu functions
Settings
(Menu 9)
83
For each profile, the following options are available:
•
Profile name
: enter a profile name.
•
Proxy port
: enter the port number of the proxy
server.
•
SSL port
: enter the port number of the SSL
server.
•
Proxy host
: enter the IP address of the proxy
server.
•
Portal URL
: enter the URL address of the i-mode
server.
•
Mail URL
: enter the URL address of the i-mail
server.
•
MMS URL
: enter the URL address of the i-MMS
server.
•
APN
: enter the access point name used for the
address of the GPRS network.
•
User ID
: enter the user ID required to connect to
the GPRS network.
•
User password
: enter the password required to
connect to the GPRS network.
Reset settings
(Menu 9.9)
Use this menu to reset the phone settings, display
settings, and sound settings individually. You can also
reset all settings in your phone at the same time.
1. Press [Centre] to select the setting categories to
be reset.
2. Press <
Reset
> to reset the marked items.
3. Press <
Yes
> to confirm the reset.
4. Enter the phone password and press <
OK
>.
Your phone is suited for connecting to the network
by default. If you change the settings without first
checking with your service provider, the i-mail and
i-MMS features may not work properly.
The password is preset to
00000000
. You can
change this password.
p. 82
84
Solve problems
Help and personal needs
To save the time and expense of an unnecessary service
call, perform the simple checks in this section before
contacting a service professional.
When you switch on your phone, the
following messages may appear:
“Insert SIM card”
• Be sure that the SIM card is correctly installed.
“Enter password”
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
“Enter PIN”
• You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the
PIN check
menu.
“Enter PUK”
• The PIN code has been entered incorrectly three
times in succession, and the phone is now blocked.
Enter the PUK supplied by your service provider.
“No service,” “Network failure,” or “Not
done” displays
• The network connection has been lost. You may be
in a weak signal area. Move and try again.
• You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
You have entered a number but it was not
dialled
• Be sure that you have pressed [ ].
• Be sure that you have accessed the right cellular
network.
• Be sure that you have not set an outgoing call
barring option.
Your correspondent cannot reach you
• Be sure that your phone is switched on. ([ ]
pressed for more than one second.)
85
Solve problems
• Be sure that you are accessing the correct cellular
network.
• Be sure that you have not set an incoming call
barring option.
Your correspondent cannot hear you speaking
• Be sure that you have switched on the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is located
at the bottom of the phone.
The phone starts beeping and “Warning Low
battery” flashes on the display
• Your battery is insufficiently charged. Recharge the
battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display
( ). The number of bars indicates the signal
strength from strong ( ) to weak ( ).
• Try moving the phone slightly or moving closer to a
window if you are in a building.
No number is dialled when you re-call a
Phonebook entry
•Use the
Contacts list
menu to ensure the number
has been stored correctly.
• Re-store the number, if necessary.
The battery doesn't charge properly or the
phone sometimes turns itself off
• Wipe the charging contacts both on the phone and
on the battery with a clean soft cloth.
If the above guidelines do not help you to
solve the problem, take note of:
• The model and serial numbers of your phone
•Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
86
Health and safety information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
exposure limits for radio frequency (RF) energy set by
the Federal Communications Commission (FCC) of the
U.S. government. These FCC exposure limits are
derived from the recommendations of two expert
organizations, the National Counsel on Radiation
Protection and Measurement (NCRP) and the Institute
of Electrical and Electronics Engineers (IEEE). In both
cases, the recommendations were developed by
scientific and engineering experts drawn from
industry, government, and academia after extensive
reviews of the scientific literature related to the
biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile
phones employs a unit of measurement known as the
Specific Absorption Rate (SAR). The SAR is a measure
of the rate of absorption of RF energy by the human
body expressed in units of watts per kilogram (W/kg).
The FCC requires wireless phones to comply with a
safety limit of 1.6 watts per kilogram (1.6 W/kg). The
FCC exposure limit incorporates a substantial margin
of safety to give additional protection to the public and
to account for any variations in measurements.
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power levels
so as to use only the power required to reach the
network. In general, the closer you are to a wireless
base station antenna, the lower the power output.
NorthAmerica_Cingular_T-mobile.fm Page 9 Monday, September 26, 2005 2:42 AM
Health and safety information
87
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that
it does not exceed the exposure limit established by
the FCC. Tests for each model phone are performed in
positions and locations (e.g. at the ear and worn on
the body) as required by the FCC. Body-worn
operations are restricted to Samsung-supplied,
approved, or non- Samsung designated accessories
that have no metal and must provide at least 1.5 cm
separation between the device, including its antenna
(whether extended or retracted) and the user's body.
Non-compliance with the above restrictions may result
in violation of FCC RF exposure guidelines.
The FCC has granted an Equipment Authorization for
this mobile phone with all reported SAR levels
evaluated as in compliance with the FCC RF exposure
guidelines. The maximum SAR values for this model
phone as reported to the FCC are:
1900
• Head: 0.357 W/Kg.
• Body-worn: 0.397 W/Kg.
SAR information on this and other model phones can
be viewed on-line at www.fcc.gov/oet/fccid. This site
uses the phone FCC ID number, A3LSGHS400i.
Sometimes it may be necessary to remove the battery
pack to find the number. Once you have the FCC ID
number for a particular phone, follow the instructions
on the website and it should provide values for typical
or maximum SAR for a particular phone. Additional
product specific SAR information can also be obtained
at www.fcc.gov/cgb/sar.
사본 - NorthAmerica_Cingular_T-mobile.fm Page 10 Monday, September 26, 2005 6:47 AM
88
Health and safety information
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
from wireless phones. The FDA publication includes
the following information:
What kinds of phones are the subject of this
update?
The term wireless phone refers here to hand-held
wireless phones with built-in antennas, often called
“cell,” “mobile,” or “PCS” phones. These types of
wireless phones can expose the user to measurable
radio frequency energy (RF) because of the short
distance between the phone and the user's head.
These RF exposures are limited by Federal
Communications Commission safety guidelines that
were developed with the advice of FDA and other
federal health and safety agencies. When the phone is
located at greater distances from the user, the
exposure to RF is drastically lower because a person's
RF exposure decreases rapidly with increasing
distance from the source. The so-called “cordless
phones,” which have a base unit connected to the
telephone wiring in a house, typically operate at far
lower power levels, and thus produce RF exposures
well within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that
any health problems are associated with using
wireless phones. There is no proof, however, that
wireless phones are absolutely safe. Wireless phones
emit low levels of radio frequency energy (RF) in the
microwave range while being used. They also emit
very low levels of RF when in the stand-by mode.
Whereas high levels of RF can produce health effects
(by heating tissue), exposure to low level RF that does
not produce heating effects causes no known adverse
health effects. Many studies of low level RF exposures
have not found any biological effects. Some studies
have suggested that some biological effects may
occur, but such findings have not been confirmed by
additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
NorthAmerica_Cingular_T-mobile.fm Page 11 Monday, September 26, 2005 2:42 AM
Health and safety information
89
What is FDA's role concerning the safety of
wireless phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new
drugs or medical devices. However, the agency has
authority to take action if wireless phones are shown
to emit radio frequency energy (RF) at a level that is
hazardous to the user. In such a case, FDA could
require the manufacturers of wireless phones to notify
users of the health hazard and to repair, replace or
recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
• “Support needed research into possible biological
effects of RF of the type emitted by wireless
phones;
• “Design wireless phones in a way that minimizes
any RF exposure to the user that is not necessary
for device function; and
• “Cooperate in providing users of wireless phones
with the best possible information on possible
effects of wireless phone use on human health.
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at
the federal level. The following agencies belong to this
working group:
• “National Institute for Occupational Safety and
Health
• “Environmental Protection Agency
• “Federal Communications Commission
• “Occupational Safety and Health Administration
• “National Telecommunications and Information
Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF
NorthAmerica_Cingular_T-mobile.fm Page 12 Monday, September 26, 2005 2:42 AM
90
Health and safety information
exposure. FCC relies on FDA and other health agencies
for safety questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from
these base stations are typically thousands of times
lower than those they can get from wireless phones.
Base stations are thus not the primary subject of the
safety questions discussed in this document.
What are the results of the research done
already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radio frequency energy
(RF) exposures characteristic of wireless phones have
yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies,
however, have suggested that low levels of RF could
accelerate the development of cancer in laboratory
animals. However, many of the studies that showed
increased tumor development used animals that had
been genetically engineered or treated with cancer-
causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies
exposed the animals to RF for up to 22 hours per day.
These conditions are not similar to the conditions
under which people use wireless phones, so we don't
know with certainty what the results of such studies
mean for human health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use
of wireless phones and primary brain cancer, glioma,
meningioma, or acoustic neuroma, tumors of the brain
or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
However, none of the studies can answer questions
about long-term exposures, since the average period
of phone use in these studies was around three years.
NorthAmerica_Cingular_T-mobile.fm Page 13 Monday, September 26, 2005 2:42 AM
Health and safety information
91
What research is needed to decide whether RF
exposure from wireless phones poses a health
risk?
A combination of laboratory studies and
epidemiological studies of people actually using
wireless phones would provide some of the data that
are needed. Lifetime animal exposure studies could be
completed in a few years. However, very large
numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one
exists. Epidemiological studies can provide data that is
directly applicable to human populations, but ten or
more years' follow-up may be needed to provide
answers about some health effects, such as cancer.
This is because the interval between the time of
exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many
years. The interpretation of epidemiological studies is
hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones.
Many factors affect this measurement, such as the
angle at which the phone is held, or which model of
phone is used.
What is FDA doing to find out more about the
possible health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields
(EMF) Project since its inception in 1996. An influential
result of this work has been the development of a
detailed agenda of research needs that has driven the
establishment of new research programs around the
world. The Project has also helped develop a series of
public information documents on EMF issues.
FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative
Research and Development Agreement (CRADA) to do
research on wireless phone safety. FDA provides the
scientific oversight, obtaining input from experts in
government, industry, and academic organizations.
CTIA-funded research is conducted through contracts
NorthAmerica_Cingular_T-mobile.fm Page 14 Monday, September 26, 2005 2:42 AM
92
Health and safety information
to independent investigators. The initial research will
include both laboratory studies and studies of wireless
phone users. The CRADA will also include a broad
assessment of additional research needs in the
context of the latest research developments around
the world.
What steps can I take to reduce my exposure
to radio frequency energy from my wireless
phone?
If there is a risk from these products - and at this
point we do not know that there is - it is probably very
small. But if you are concerned about avoiding even
potential risks, you can take a few simple steps to
minimize your exposure to radio frequency energy
(RF). Since time is a key factor in how much exposure
a person receives, reducing the amount of time spent
using a wireless phone will reduce RF exposure.
• “If you must conduct extended conversations by
wireless phone every day, you could place more
distance between your body and the source of the
RF, since the exposure level drops off dramatically
with distance. For example, you could use a
headset and carry the wireless phone away from
your body or use a wireless phone connected to a
remote antenna.
Again, the scientific data do not demonstrate that
wireless phones are harmful. But if you are concerned
about the RF exposure from these products, you can
use measures like those described above to reduce
your RF exposure from wireless phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to
users of wireless phones, including children and
teenagers. If you want to take steps to lower exposure
to radio frequency energy (RF), the measures
described above would apply to children and
teenagers using wireless phones. Reducing the time of
wireless phone use and increasing the distance
between the user and the RF source will reduce RF
exposure.
Some groups sponsored by other national
governments have advised that children be
discouraged from using wireless phones at all. For
NorthAmerica_Cingular_T-mobile.fm Page 15 Monday, September 26, 2005 2:42 AM
Health and safety information
93
example, the government in the United Kingdom
distributed leaflets containing such a recommendation
in December 2000. They noted that no evidence exists
that using a wireless phone causes brain tumors or
other ill effects. Their recommendation to limit
wireless phone use by children was strictly
precautionary; it was not based on scientific evidence
that any health hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free
kits can be used with wireless phones for convenience
and comfort. These systems reduce the absorption of
RF energy in the head because the phone, which is the
source of the RF emissions, will not be placed against
the head. On the other hand, if the phone is mounted
against the waist or other part of the body during use,
then that part of the body will absorb more RF energy.
Wireless phones marketed in the U.S. are required to
meet safety requirements regardless of whether they
are used against the head or against the body. Either
configuration should result in compliance with the
safety limit.
Do wireless phone accessories that claim to
shield the head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that accessories that claim to shield the head
from those emissions reduce risks. Some products
that claim to shield the user from RF absorption use
special phone cases, while others involve nothing
more than a metallic accessory attached to the phone.
Studies have shown that these products generally do
not work as advertised. Unlike “hand-free” kits, these
so-called “shields” may interfere with proper operation
of the phone. The phone may be forced to boost its
power to compensate, leading to an increase in RF
absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold
devices that claimed to protect wireless phone users
from radiation with making false and unsubstantiated
NorthAmerica_Cingular_T-mobile.fm Page 16 Monday, September 26, 2005 2:42 AM
94
Health and safety information
claims. According to FTC, these defendants lacked a
reasonable basis to substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted
cardiac pacemakers and defibrillators from wireless
telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of
Medical instrumentation (AAMI). The final draft, a joint
effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This
standard will allow manufacturers to ensure that
cardiac pacemakers and defibrillators are safe from
wireless phone EMI. FDA has tested wireless phones
and helped develop a voluntary standard sponsored by
the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and
performance requirements for hearing aids and
wireless phones so that no interference occurs when a
person uses a compatible phone and a compatible
hearing aid at the same time. This standard was
approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones
for possible interactions with other medical devices.
Should harmful interference be found to occur, FDA
will conduct testing to assess the interference and
work to resolve the problem.
Additional information on the safety of RF exposures
from various sources can be obtained from the
following organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's
(OSHA):
http://www.osha.gov/SLTC/
radiofrequencyradiation/index.html
NorthAmerica_Cingular_T-mobile.fm Page 17 Monday, September 26, 2005 2:42 AM
Health and safety information
95
• National institute for Occupational Safety and
Health (NIOSH):
http://www.cdc.gov/niosh/emfpg.html
• World health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing
Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.nrpb.org.uk
• Updated 4/3/2002: US food and Drug
Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime.
But an important responsibility accompanies the
benefits of wireless phones, one that every user must
uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features,
such as speed dial and redial. If available, these
features help you to place your call without taking
your attention off the road.
2. When available, use a hands-free device. If
possible, add an additional layer of convenience
and safety to your wireless phone with one of the
many hands free accessories available today.
NorthAmerica_Cingular_T-mobile.fm Page 18 Monday, September 26, 2005 2:42 AM
96
Health and safety information
3. Position your wireless phone within easy reach. Be
able to access your wireless phone without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your
voice mail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain,
sleet, snow, ice and even heavy traffic can be
hazardous.
5. Do not take notes or look up phone numbers while
driving. Jotting down a “to do” list or flipping
through your address book takes attention away
from your primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car
will be stationary. If you need to make a call while
moving, dial only a few numbers, check the road
and your mirrors, then continue.
7. Do not engage in stressful or emotional
conversations that may be distracting. Make
people you are talking with aware you are driving
and suspend conversations that have the potential
to divert your attention from the road.
8. Use your wireless phone to call for help. Dial 9-1-1
or other local emergency number in the case of
fire, traffic accident or medical emergencies.
Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. If you see an auto accident, crime in
progress or other serious emergency where lives
are in danger, call 9-1-1 or other local emergency
number, as you would want others to do for you.
10.Call roadside assistance or a special non-
emergency wireless assistance number when
necessary. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal, a
minor traffic accident where no one appears
injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-
emergency number.
NorthAmerica_Cingular_T-mobile.fm Page 19 Monday, September 26, 2005 2:42 AM
Health and safety information
97
“The wireless industry reminds you to use your
phone safely when driving.”
For more information, please call 1-888-901-SAFE, or
visit our web-site www.wow-com.com
Provided by the Cellular Telecommunications &
Internet Association
Operating Environment
Remember to follow any special regulations in force in
any area and always switch your phone off whenever it
is forbidden to use it, or when it may cause
interference or danger. When connecting the phone or
any accessory to another device, read its user's guide
for detailed safety instructions. Do not connect
incompatible products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation of
the equipment and for the safety of personnel, it is
recommended that the equipment should only be used
in the normal operating position (held to your ear with
the antenna pointing over your shoulder).
Using Your Phone Near Other Electronic
Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against the
RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be maintained
between a wireless phone and a pacemaker to avoid
potential interference with the pacemaker.
These recommendations are consistent with the
independent research and recommendations of
Wireless Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone is
switched on.
• should not carry the phone in a breast pocket.
NorthAmerica_Cingular_T-mobile.fm Page 20 Monday, September 26, 2005 2:42 AM
98
Health and safety information
• should use the ear opposite the pacemaker to
minimize potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you
may wish to consult your hearing aid manufacturer to
discuss alternatives.
Other Medical Devices
If you use any other personal medical devices, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information. Switch your phone off in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to
external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted
notices require you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
NorthAmerica_Cingular_T-mobile.fm Page 21 Monday, September 26, 2005 2:42 AM
99
areas), chemical plants or where blasting operations
are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas (such
as propane or butane), areas where the air contains
chemicals or particles, such as grain, dust or metal
powders, and any other area where you would
normally be advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well as
user programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should
never rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not be
possible on all wireless phone networks or when
certain network services and/or phone features are in
use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 911 or other official
emergency number). Emergency numbers vary by
location.
3. Press .
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular service
provider.
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut
off the call until given permission to do so.
NorthAmerica_Cingular_T-mobile.fm Page 22 Monday, September 26, 2005 2:42 AM
100
Health and safety information
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed
to play with it because they could hurt themselves and
others, damage the phone or make calls that increase
your phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used
in close proximity to receiving equipment. The FCC
can require you to stop using the phone if such
interference cannot be eliminated.
Vehicles using liquefied petroleum gas (such as
propane or butane) must comply with the National Fire
Protection Standard (NFPA-58). For a copy of this
standard, contact the National Fire Protection
Association, One Battery march Park, Quincy, MA
02269, Attn: Publication Sales Division.
Cautions
Changes or modifications made in the radio phone, not
expressly approved by Samsung, will void the user’s
authority to operate the equipment.
Only use approved batteries, antennas and chargers.
The use of any unauthorized accessories may be
dangerous and void the phone warranty if said
accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex
piece of equipment and can be broken. Avoid
dropping, hitting, bending or sitting on it.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
NorthAmerica_Cingular_T-mobile.fm Page 23 Monday, September 26, 2005 2:42 AM
101
Other Important Safety Information
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty installation
or service may be dangerous and may invalidate
any warranty applicable to the device.
• Check regularly that all wireless phone equipment
in your vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
• Switch your phone off before boarding an aircraft.
The use of wireless phone in aircraft is illegal and
may be dangerous to the aircraft's operation.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends
on the signal strength in your area. Your phone
informs you of the current signal strength by
displaying a number of bars next to the signal strength
icon. The more bars displayed, the stronger the signal.
If you're inside a building, being near a window may
give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15
minutes of searching, a Power Save feature is
automatically activated. If your phone is active, it
periodically rechecks service availability or you can
check it yourself by pressing any key.
Anytime the Power Save feature is activated, a
message displays on the screen. When a signal is
found, your phone returns to standby mode.
NorthAmerica_Cingular_T-mobile.fm Page 24 Monday, September 26, 2005 2:42 AM
102
Health and safety information
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and
receiver. When it's turned on, it receives and transmits
radio frequency (RF) signals. When you use your
phone, the system handling your call controls the
power level. This power can range from 0.006 watts to
0.2 watts in digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and accessories.
Faulty service may void the warranty.
There are several simple guidelines to operating your
phone properly and maintaining safe, satisfactory
service.
• Hold the phone with the antenna raised, fully-
extended and over your shoulder.
• Try not to hold, bend or twist the phone's antenna.
• Don't use the phone if the antenna is damaged.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain
or liquid spills. If your phone does get wet,
immediately turn the power off and remove the
battery. If it is inoperable, call Customer Care for
service.
Availability of Various Features/Ring
Tones
Many services and features are network dependent
and may require additional subscription and/or usage
charges. Not all features are available for purchase or
use in all areas. Downloadable Ring Tones may be
available at an additional cost. Other conditions and
restrictions may apply. See your service provider for
additional information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone
usage patterns and conditions. Battery power
consumption depends on factors such as network
configuration, signal strength, operating temperature,
features selected, frequency of calls, and voice, data,
and other application usage patterns.
NorthAmerica_Cingular_T-mobile.fm Page 25 Monday, September 26, 2005 2:42 AM
Health and safety information
103
Battery Precautions
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time
to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-
approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than a
week, since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and lifetime of the battery.
Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between the
+ and - terminals of the battery (metal strips on
the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the
terminals may damage the battery or the object
causing the short-circuiting.
NorthAmerica_Cingular_T-mobile.fm Page 26 Monday, September 26, 2005 2:42 AM
104
Health and safety information
• Dispose of used batteries in accordance with local
regulations. In some areas, the disposal of
batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion
batteries, contact your nearest Samsung
authorized service center. Always recycle. Do not
dispose of batteries in a fire.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Keep the phone and all its parts and accessories
out of the reach of small children.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode electronic
circuits.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
• Do not use or store the phone in dusty, dirty areas,
as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit
boards.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with
a soft cloth slightly dampened in a mild soap-and-
water solution.
NorthAmerica_Cingular_T-mobile.fm Page 27 Monday, September 26, 2005 2:42 AM
Health and safety information
105
• Do not paint the phone. Paint can clog the device's
moving parts and prevent proper operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
• When the phone or battery gets wet, the label
indicating water damage inside the phone changes
color. In this case, phone repairs are no longer
guaranteed by the manufacturer's warranty, even
if the warranty for your phone has not expired.
• If your phone has a flash or light, do not use it too
close to the eyes of people or animals. This may
cause damage to their eyes.
• Use only the supplied or an approved replacement
antenna. Unauthorized antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
NorthAmerica_Cingular_T-mobile.fm Page 28 Monday, September 26, 2005 2:42 AM
106
Index
A
AB mode, text input • 21
Alarm • 37
Answering
call • 24
second call • 25
Anykey answer • 73
Auto redial • 73
B
Backlight time, set • 73
Band selection • 78
Barring, calls • 76
Battery
charging • 7
low indicator • 8
precautions • 87
Bluetooth
receiving, data • 81
sending, data • 81
settings • 79
Broadcast messages • 42
C
Calculator • 38
Calendar • 61
Call cost • 30
Call records
dialled • 29
missed • 29
received • 29
Call time • 29
Caller group
creating • 32
managing • 32
Caller ID • 77
Calls
answering • 24
barring • 76
diverting • 76
holding • 25
redialling • 24
rejecting • 24
transferring • 26
waiting • 77
Camera
options • 66
photos • 65
videos • 68
CB (Cell Broadcast) messages •
42
Characters, enter • 21
Conference call • 27
Connection tone • 75
Converter • 39
Creating messages
i-mail • 48
i-MMS • 49
SMS • 40
Creating organiser
anniversaries • 62
events • 61
memos • 63
tasks • 63
D
Deleting
call records • 28
events • 64
i-mail/MMS • 52, 53
missed alarms • 65
phonebook 34
photos • 68
text messages • 42
video clips • 71
Delivery reports, message • 45
Dialled calls • 29
Dialling font, set • 74
Display
language • 72
settings • 73
Diverting, calls • 76
DTMF tones, send • 26
E
Emergency calls • 90
External speaker • 26
F
FDN (Fixed Dialling Number)
mode • 82
Forwarding
i-mail/MMS • 51
SMS • 42
G
Games • 54
Greeting message • 72
H
Health and safety • 86
Holding, call • 25
107
Index
I
Icons, description • 10
Images, downloaded • 57
i-mail
creating/sending • 48
deleting • 52
setting • 53
i-menu • 46
i-MMS
creating/sending • 49
deleting • 51
setting • 53
i-mode
accessing • 46
locking • 82
setting • 56
Inbox, messages
i-mail/MMS • 51
SMS • 41
International calls • 23
Internet • 46
K
Key tone volume • 74
Keypad tones
selecting • 74
sending • 27
L
Language, select • 72
Last number, redial • 24
Locking
menu functions • 82
phone • 82
SIM card • 82
Low battery indicator • 8
M
Memory status
downloaded items • 60
i-mail/MMS • 54
phonebook 34
text messages • 46
Message tone • 74
Messages
cell broadcast • 42
greeting • 72
i-mail • 48
i-MMS • 49
text • 40
voice • 77
Minute minder • 75
Missed alarm events • 64
Missed calls • 29
Multi-party calls • 27
Music, downloaded • 58
Muting
key tones • 27
microphone • 26
My name card • 33
N
Names
entering • 21
searching • 30
Network band, select • 78
Network selection • 77
Network services • 75
O
Outbox, messages
i-mail/MMS • 52
SMS • 43
Own number • 34
P
Password
call barring • 76
phone • 82
Phone
care and maintenance •
91
display • 10
icons • 10
locking • 82
password • 82
resetting • 83
switching on/off • 8
unpacking • 6
Phonebook
copying • 31
deleting • 34
editing • 31
managing • 34
options • 31
speed-dialling • 33
Photos
deleting • 68
taking • 65
viewing • 67
PIM sync
creating a profile • 37
starting • 38
PIN, change • 81
PIN2, change • 82
Power on/off tone • 75
Privacy • 82
Problems, solve • 84
108
Index
R
Received calls • 29
Received messages
i-mail/MMS • 51
text • 41
Recording
videos • 68
voice memos • 35
Redialling
automatically • 73
manually • 24
Resetting phone • 83
Ringer
incoming calls • 74
messages • 74
Road safety • 88
Roaming • 77
S
Safety
information • 86
Security, calls • 81
Sent messages
i-mail/MMS • 52
text • 43
SIM card
inserting • 7
locking • 82
Slide
setting • 72
tone • 75
SMS messages
creating/sending • 40
deleting • 42
viewing • 41
Sound settings • 74
Sounds, downloaded • 59
Speed-dial • 33
Stopwatch • 39
Switching on/off
microphone • 26
phone • 8
T
Templates • 44
Text input mode, change • 21
Text, enter • 21
Timer • 39
Tone
alert • 75
connect • 75
error • 75
keypad • 74
message • 74
minute minder • 75
power on/off • 75
V
Videos
deleting • 71
playing • 70
recording • 68
Voice memos
playing • 35
recording • 35
Voice recorder
playing • 35
recording • 35
Voicemail server
connecting • 77
editing • 78
W
Waiting call • 77
World time • 36