Download: Mirror Download [FCC.gov] Document ID 568017 Application ID 4cDA1Oo/RPIOCaoBKB/qtg== Document Description Users Manual Short Term Confidential No Permanent Confidential No Supercede No Document Type User Manual Display Format Adobe Acrobat PDF - pdf Filesize 113.05kB (1413120 bits) Date Submitted 2005-08-03 00:00:00 Date Available 2005-09-17 00:00:00 Creation Date 2005-07-20 16:57:02 Producing Software Acrobat Distiller 6.0.1 (Windows) Document Lastmod 2005-07-20 16:57:17 Document Title Microsoft Word - HW_SW Descripsion_SGH-x800.doc Document Creator PScript5.dll Version 5.2 Document Author: kim
Draft
07. 07
2005. 00XXEG1)
X8
io
(Vers
SGH-X800
User’s Guide
Drive safely at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Keep your phone away from small children
All wireless phones may be subject to interference,
which could affect their performance.
Keep the phone and all its parts, including accessories,
out of the reach of small children.
Be aware of special regulations
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories could
damage your phone and may be dangerous.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
• The phone could explode if the battery is replaced
with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Qualified service
Emergency calls
For more detailed safety information, see "Health and
safety information" on page 90.
Key in the emergency number for your present
location, then press
Important safety precautions
Interference
Only qualified service personnel may repair your
phone.
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful attention
to the subsequent information regarding safety
or phone features.
Indicates that you can get more information on
the referenced page.
→
Indicates that you need to press the Navigation
keys to scroll to the specified option and then
select it.
< >
Indicates a key on the phone. For example,
[ ].
Indicates a soft key, whose function is displayed
on the phone screen. For example,
•
Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
Special features of your phone
•
Image editor
Crop, resize, rotate, and decorate
your photos.
•
MP3 player
Play MP3 music files using your
phone as an MP3 player.
•
File viewer
Open documents in various
formats on the phone without
corruption.
•
•
•
Get personal with photo caller
ID
See who’s calling you when their
very own photo displays.
Name card
Create name cards with your
number and profile. Whenever
introducing yourself to others, use
this convenient electronic name
card.
Multimedia Message Service (MMS)
Send and receive MMS messages with a
combination of text, images, video, and audio.
•
E-mail
Send and receive e-mails with images, video,
and audio attachments.
•
Web browser
Access the wireless web to get
current information and up-to-theminute a wide variety of media
content.
•
Java
Enjoy Java™-based embedded
games and download new games.
•
Calendar
Keep track of your daily, weekly,
and monthly schedule.
•
Voice recorder
Record memos or sounds.
Special features of your phone
•
Bluetooth
Transfer media files and personal
data and connect to other devices
using free, wireless Bluetooth
technology. You can also use a
stereo Bluetooth headset to let you
enjoy music with high quality
stereo sound.
Contents
Unpack
Make sure you have each item
Your phone
Buttons, features, and locations
Get started
17
17
18
20
21
22
Enter text
24
AB, T9, Number, and Symbol mode
Call functions
First steps to operating your phone
Advanced calling features
Install and charge the phone ..................................... 7
Power on or off........................................................ 8
Keys and display ..................................................... 9
Access menu functions ............................................ 11
Customise your phone............................................. 12
Make/Answer calls .................................................. 14
Menu functions
Step outside the phone
15
Begin with your camera, MP3, web, and other special
features
Use the camera ...................................................... 15
Play MP3s .............................................................. 16
Browse the web......................................................
Use Contacts..........................................................
Send messages ......................................................
View messages.......................................................
Use Bluetooth ........................................................
Use a memory card.................................................
26
30
All menu options listed
Solve problems
88
Help and personal needs
Health and safety information
Index
90
111
Overview of menu functions
To access Menu mode, press in Idle mode.
1 Call log
p. 30
3 Applications
p. 36
5 Messages
p. 48
p. 30
p. 31
p. 31
p. 31
p. 31
p. 31
p. 32
1 MP3 player
2 Voice recorder
3 Image editor
4 Java world
5 World time
6 Alarm
7 Calculator
8 Converter
9 Timer
10 Stopwatch
11 Key management
12 SIM AT*
p. 36
p. 39
p. 40
p. 42
p. 42
p. 43
p. 44
p. 44
p. 44
p. 45
p. 45
p. 45
p. 48
p. 51
p. 56
p. 56
p. 57
p. 62
4 Browser
p. 45
p. 46
p. 47
p. 47
p. 48
p. 48
p. 48
p. 48
Recent contacts
Missed calls
Dialled calls
Received calls
Delete all
Call time
Call cost*
2 Contacts
p. 32
p. 32
p. 33
p. 34
p. 34
p. 35
p. 35
p. 36
p. 36
Contacts list
Add new contact
Group
Speed dial
My name card
Own number
Management
Service number*
Home
Enter URL
Bookmarks
Saved pages
History
Clear cache
Browser settings
Create message
My messages
Templates
Delete all
Settings
Memory status
6 File manager
p. 62
p. 62
p. 63
p. 64
p. 65
p. 65
p. 67
p. 67
Images
Videos
Music
Sounds
Other files
Memory card**
Memory status
7 Calendar
p. 67
8 Camera
p. 70
9 Settings
p. 76
p. 77
p. 77
p. 78
p. 79
p. 80
p. 83
p. 85
p. 87
p. 88
Time and date
Phone settings
Display settings
Sound settings
Network services
Bluetooth
Security
Connection settings
Reset settings
* Shows only if supported by your
SIM card.
** Shows only if a memory card is
installed.
Unpack
Your phone
Make sure you have each item
Buttons, features, and locations
Earpiece
Display
Phone
Travel Adapter
Camcorder
Micorphone
Battery
Left soft key
User’s Guide
You can obtain various accessories from
your local Samsung dealer.
The items supplied with your phone
and the accessories at your Samsung
dealer may vary, depending on your
country or service provider.
Headset jack
Dial key
Volume keys
Alphanumeric
keys
Special
function keys
Navigation keys
(Up/Down/Left/
Right)
Web access/
Confirm key
Right soft key
Power on/off/
Menu exit key
Correct key
Microphone
Camera
External
speaker
Flash
Camera key
External
display
MP3 player
control keys
Get started
Install the battery.
First steps to operating your phone
Plug the travel adapter
into the phone.
SIM card information
When you subscribe to a cellular network, you receive
a plug-in SIM (Subscriber Identity Module) card
loaded with your subscription details, such as your
PIN, and available optional services.
Install and charge the phone
Remove the battery.
Plug the adapter into a standard AC wall outlet.
Insert the SIM card.
When the phone is completely charged (the
battery icon becomes still), unplug the adapter
from the power outlet.
If the phone is already
on, first turn it off by
holding [
].
Make sure that the goldcoloured contacts on the
card face down into the
phone.
Get started
Remove the adapter from the phone.
Power on or off
Switch on
1. Open the phone.
2. Press and hold [
the phone.
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the low battery message displays, and
• the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
] to turn on
Do not turn on
the phone when
mobile phone
use is prohibited.
3. If necessary, enter the PIN and
press .
Switch off
1. Open the phone.
2. Press and hold [
].
Keys and display
Keys
In Idle mode, access your favourite menus
directly.p. 77
In Menu mode, scroll through menu options.
In Idle mode, launch the web browser.
In Menu mode, select the highlighted menu
option or confirm input.
Make or answer a call.
In Idle mode, retrieve the recent numbers
dialled, missed, or received.
Delete characters from the display.
End a call.
Press and hold to switch the phone on or off.
In Menu mode, cancel input and return the
phone to Idle mode.
Get started
Perform the function indicated on the bottom
line of the display.
Enter numbers, letters, and some special
characters.
In Idle mode, press and hold [1] to access
your voicemail server. Press and hold [0] to
enter an international call prefix.
Enter special characters.
In Idle mode, press and hold [ ] to activate
or deactivate Quiet mode. Press and hold
[ ] to enter a pause between numbers.
Adjust the phone volume.
In Idle mode, with the phone open, adjust
the keypad tone volume. With the phone
closed, press and hold to turn on the
external display or flashlight.
In Idle mode, press and hold to turn on the
camera.
In Camera mode, take a photo or record a
video.
Get started
Press and hold to launch or close the MP3
player.
Start playing music.
Move back to the previous file during
playback.
Skip to the next file during playback.
Icons*
Received signal strength
Call in progress
Out of your service area; you
cannot make or receive calls
GPRS network
Connecting to GPRS network
Connected to Internet
Roaming network
Stop playback.
New message
New e-mail
Display
New voicemail
Layout
Icons
display various icons.
Text and graphics
display messages,
instructions, and
information you enter.
Call diverting feature active
Home Zone, if registered for the
appropriate service
Office Zone, if registered for the
appropriate service
Bluetooth active
Menu
10
Contacts
Soft key function
indicators
show the current functions
assigned to the soft keys.
Connected to Bluetooth hands-free
car kit or headset
Synchronised with PC
MP3 playback in progress
MP3 playback paused
Call ringer set to vibrate
Quiet mode (Vibration)
Use the soft
keys
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current role.
Select
Get started
Memory card inserted
Alarm set
Access menu functions
Back
Quiet mode (Mute)
Mute mode, during a call
Battery power level
* Depending on your country or service provider, the
icons shown on the display may vary.
Press the left
soft key to select
the highlighted
option.
Press the right
soft key to return
to the previous
menu level.
11
Get started
Select an
option
1. Press the appropriate soft key.
2. Press the Navigation keys to
move to the next or previous
option.
3. Press , , or
[ ] to confirm the function
displayed or option highlighted.
4. To exit, choose either of the
following methods.
• Press to move up
one level.
• Press [ ] to return to Idle
mode.
Use shortcuts
12
Press the number key
corresponding to the option you
want. For the index numbers 10, 11
and 12, press [0], [ ] and [ ],
respectively.
Customise your phone
Display
language
1. In Idle mode, press
and select Settings → Phone
settings → Language.
2. Select a language.
Call ringer
melody
1. In Idle mode, press
and select Settings → Sound
settings → Incoming call →
Ringtone.
2. Select a ringtone category.
3. Select a ringtone.
4. Press .
Idle mode
wallpaper
You can set wallpaper for the idle
screen on each display.
1. In Idle mode, press
and select Settings → Phone
settings → Shortcut.
2. Select av image category.
2. Select a key.
3. Select an image.
3. Select a menu to be assigned to
the key.
4. Press .
5. Press .
Quiet mode
Menu mode
skin colour
You can set the Navigation keys as
shortcuts to access your favourite
menus.
You can change the colour for the
display components, such as title
bars and highlight bars.
Get started
1. In Idle mode, press
and select Settings → Display
settings → Wallpaper → Main
display or Cover display.
Menu
shortcuts
You can switch the phone to Quiet
mode to avoid disturbing other
people.
Press and hold [ ] in Idle mode.
1. In Idle mode, press
and select Settings → Display
settings → Skin.
2. Select a colour pattern.
13
Get started
Phone lock
You can protect the phone against
unauthorised use with a phone
password. The phone will require
the password on power-up.
1. In Idle mode, press
and select Settings →
Security → Change
password.
2. Enter the default password,
00000000, and press .
3. Enter a new 4- to 8-digit
password and press .
4. Enter the new password again
and press .
5. Select Phone lock.
6. Select Enable.
7. Enter the password and press
.
14
Make/Answer calls
Make a call
1. In Idle mode, enter an area
code and phone number.
2. Press [
].
3. To end the call, press [
Answer a call
1. When the phone is ringing,
press [ ].
2. To end the call, press [
Adjust the
volume during
a call
].
Press [ / ].
].
Step outside the phone
Begin with your camera, MP3, web, and other special
features
Record a video
2. Press [1] to switch to Record
mode.
Use the camera
Take a photo
3. Press [
2. In Idle mode, press and hold
[ ] to turn on the camera.
5. Press to record
another video.
3. Aim the lens at the subject and
adjust the image.
5. Press to take
another photo.
View a photo
] to start recording.
4. Press [ ] to stop recording.
The video is saved
automatically.
1. Open the phone.
4. Press [ ] to take a photo. The
photo is saved automatically.
1. In Idle mode, press and hold
[ ] to turn on the camera.
Play a video
1. In Idle mode, press
and select File manager →
Videos → Video clips.
2. Select the video you want.
1. In Idle mode, press
and select File manager →
Images → Photos.
2. Select the photo you want.
15
Step outside the phone
Play MP3s
Copy MP3 files
to the phone
Use these methods:
•
Download from the wireless
webp. 45
•
Download from a computer
using the optional Samsung PC
Studio Samsung PC Studio
User’s Guide
•
•
Create a play
list
Receive via Bluetoothp. 85
Copy to a memory card and
insert the card into the phone.
p. 22
1. In Idle mode, press
and select Applications →
MP3 player.
2. Press and select
Add music from → Phone or
Memory card.
16
3. Press [ ] to check the files you
want and press .
4. Press to return to the
MP3 player screen.
Play MP3 files
1. From the MP3 player screen,
press [ ].
2. During playback, use the
following keys:
•
: pauses or resumes
playback.
• Left: moves back to the
previous file.
• Right: skips to the next file.
• Up: opens the play list.
•
/ : adjusts the volume.
• Down: stops playback.
Use Contacts
Using a built-in web browser, you can get easy access
to the wireless web to get a variety of up-to-date
services and information and to enjoy downloads of
web content.
Add an entry
To the phone’s memory:
1. In Idle mode, enter a phone
number and press .
Step outside the phone
Browse the web
2. Select Save contact → Phone
→ a number type.
Launch the
web browser
In Idle mode, press [
].
Navigate with
the web
browser
•
To scroll through browser items,
press [Up] or [Down].
•
To select an item, press [
•
To return to the previous page,
press .
•
To move to the next page, press
and select Go →
Forward.
1. In Idle mode, enter a phone
number and press .
•
To access browser options,
press .
3. Enter a name.
].
3. Specify contact information:
First name, Last name, Mobile,
Home, Office, Fax, Other, Email,
Caller ID, Ringtone, Group, and
Memo.
4. Press to save the
entry.
To the SIM card:
2. Select Save contact → SIM.
4. Press to save the
entry.
17
Step outside the phone
Find an entry
1. In Idle mode, press
.
2. Select an entry.
3. Scroll to a number and press
] to dial, or press [ ] to
edit contact information.
Create and
send a name
card
1. In Idle mode, press
Send a text
and select Messages → Create
message (SMS)
message → Text message.
2. Enter the message text.
3. Press and select
Save and send or Send only.
1. In Idle mode, press
and select Contacts → My
name card.
2. Specify your contact
information.
3. Press to save the
name card.
4. To send the name card to other
people, press and
select Send via → a sending
method.
18
Send messages
4. Enter destination numbers.
5. Press [
Send a
multimedia
message
(MMS)
] to send the message.
1. In Idle mode, press
and select Messages → Create
message → Multimedia
message.
2. Select Subject.
3. Enter the message subject and
press [ ].
4. Select Image and video or
Sound.
6. Select Message.
7. Enter the message text and
press [ ].
8. Press and select
Send.
9. Enter destination numbers or
addresses.
10. Press [
] to send the message.
Step outside the phone
5. For Image and video, select
Add image or Add video and
add an image or video clip.
For Sound, select Add sound
and add a sound clip.
Send an e-mail 1. In Idle mode, press
and select Messages → Create
message → Email.
2. Select Subject.
3. Enter the e-mail subject and
press [ ].
4. Select Message.
5. Enter the e-mail text and press
[ ].
6. Select File attached.
7. Add image, video, sound,
music files, or document files.
8. Press and select
Send.
9. Enter e-mail addresses.
10. Press [
] to send the e-mail.
19
Step outside the phone
View messages
View a text
message
From the Inbox:
1. In Idle mode, press
and select Messages → My
messages → Inbox.
When a notification appears:
1. Press .
2. Select a message from the
Inbox.
2. Select an MMS message (
From the Inbox:
1. In Idle mode, press
and select Messages → My
messages → Inbox.
2. Select an SMS message (
View a
multimedia
message
When a notification appears:
1. Press .
2. Press and select
Retrieve.
3. Select a message from the
Inbox.
20
).
View an e-mail
).
1. In Idle mode, press
and select Messages → My
messages → Email inbox.
2. Select an account.
3. Press to retrieve new
e-mails or headers.
4. Select an e-mail or a header.
5. If you selected a header, press
and select
Retrieve.
Use Bluetooth
Turn on
Bluetooth
Search for and
pair with a
Bluetooth
device
Send data
2. Scroll to an item.
3. Press and select
Send via → Bluetooth.
In Idle mode, press and
select Settings → Bluetooth →
Activation → On.
1. In Idle mode, press
and select Settings →
Bluetooth → My devices →
Search for new devices.
2. Select a device.
3. Enter a Bluetooth PIN code or
the other device’s Bluetooth PIN
code, if it has one, and press
.
When the owner of the other
device enters the same code,
pairing is complete.
1. Access an application,
Contacts, File manager, or
Calendar.
4. Select a device.
5. If necessary, enter the
Bluetooth PIN and press .
Receive data
To receive data via Bluetooth, your
phone’s Bluetooth feature must be
active.
If necessary, press to
confirm the reception.
21
Step outside the phone
Your phone is equipped with Bluetooth technology
which enables you to connect the phone wirelessly to
other Bluetooth devices and exchange data with them,
talk hands-free, or control the phone remotely.
Step outside the phone
Use a memory card
• Do not expose cards in a place
subject to electro static
discharge and/or electrical
noise.
You can use a optional Trans Flash memory card to
enlarge your phone’s memory capacity. The phone
supports memory cards with capacity of up to 512 MB.
Important
memory card
information
• Frequent erasing and writing will
shorten a card’s lifespan.
• Do not remove a card from the
phone or turn off the phone
while data is being accessed or
transferred. This could result in
loss of data and/or damage to
the card or phone.
• Do not subject cards to strong
shocks.
• Do not touch card terminals with
your fingers or metal objects. If
dirty, wipe the card with a soft
cloth.
• Keep cards away from small
children or pets.
22
Insert a
memory card
1. Remove the battery.
2. Slide a memory card into the
card slot, with the label side
face up.
Use a card
adapter
Using a card adaptor and a USB
card reader/writer, you can read the
card on a PC.
Step outside the phone
1. Insert a memory card into a card
adaptor, and then the adaptor
into a card reader/writer.
2. Plug the USB connector of the
card reader/writer into the USB
port on your PC.
3. Access the appropriate memory
disk and copy to and from the
card.
23
Enter text
AB, T9, Number, and Symbol mode
You can enter text for some features, such as
Messages, Contacts, or Calendar, using AB mode, T9
mode, Number mode, and Symbol mode.
Using AB mode
Press the appropriate key until the character you want
appears on the screen.
Key
Characters in order displayed
Upper case
Lower case
Changing the text input mode
•
•
•
Press and hold [ ] to switch between T9 mode
) and AB mode (
). Depending on your
country, you may also be able to access an input
mode for your specific language.
Press [ ] to change case or switch to Number
mode (
).
Press and hold [ ] to switch to Symbol mode.
(Creating an SMS message in unicode encoding)
24
Tips for using AB mode
•
Using T9 mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
Entering a word in T9 mode
1. Press [2] to [9] to start entering a word. Press
each key once for each letter.
For example, press [4], [3], [5], [5], and [6] to
enter HELLO in T9 mode.
T9 predicts the word that you are typing, and it
may change with each key that you press.
2. Enter the whole word before editing or deleting
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [0] to display alternative word
choices for the keys that you have pressed.
For example, OF and ME use [6] and [3].
4. Press [ ] to insert a space and enter the next
word.
Enter text
•
•
•
To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
Press [ ] to insert a space.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Tips for using T9 mode
•
•
•
•
Press [1] to enter periods or apostrophes
automatically.
Press [ ] to insert a space.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Adding a new word to the T9 dictionary
This feature may not be available for some languages.
1. Enter the word that you want to add.
25
2. Press [0] to display alternative words for your key
presses. When there are no more alternative
words, Add appears on the bottom line.
3. Press .
4. Enter the word you want using AB mode and press
.
Using Number mode
Number mode enables you to enter numbers.
Press the keys corresponding to the digits you want.
Using Symbol mode
Symbol mode enables you to insert symbols.
26
To
Press
display more symbols
[Up] or [Down].
select a symbol
the corresponding
number key.
clear the entered symbols
[C].
insert the symbols
.
Call functions
Advanced calling features
Making a call
1. In Idle mode, enter the area code and phone
number.
2. Press [ ].
• Press [C] to clear the last digit or press and hold
[C] to clear the whole display. You can move the
cursor to edit an incorrect digit.
• Press and hold [ ] to enter a pause between
numbers.
Making an international call
1. In Idle mode, press and hold [0]. The + character
appears.
2. Enter the country code, area code, and phone
number, then press [ ].
Redialling recent numbers
1. In Idle mode, press [
recent numbers.
] to display the list of
2. Scroll to the number you want and press [
].
Making a call from Contacts
You can also use the speed dial feature to assign your
most frequently called numbers to specific number
keys.p. 34
You can quickly dial a number from the SIM card using
its location number assigned when stored.
1. In Idle mode, enter a location number and press
[ ].
2. Press [Left] or [Right] to scroll through other
numbers.
3. Press or [ ] to dial the number you want.
Ending a call
Close the phone or press [
].
When you receive an incoming call, the phone rings
and displays the incoming call image.
Press or [
] to answer the call.
Call functions
Once you have stored a number in Contacts, you can
dial the number by selecting it from Contacts.
p. 32
Answering a call
Tips for answering a call
•
•
•
•
When Anykey answer is active, you can press
any key, except for or [ ].p. 78
When Active flip is active, you can simply open
the phone.p. 78
Press or [ ] to reject a call.
Press and hold [ / ] to reject a call or mute the
ringer, depending on the Side key setting.p. 77
Viewing missed calls
If you have missed calls, the screen displays how
many calls you have missed.
1. Press .
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
27
Call functions
Using the headset
Placing a call on hold/Retrieving
Use the headset to make or answer calls without
holding the phone.
Press or to place a call on hold
or retrieve the call.
Connect the headset to the jack on the left side of the
phone. The button on the headset work as listed
below:
Making a second call
To
Press
redial the last call
and hold the button twice.
answer a call
the button.
end a call
the button.
Options during a call
You can access a number of functions during a call.
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume during a call.
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
28
You can make another call if your network supports it.
1. Press to put the call on hold.
2. Make the second call in the normal way.
3. Press to switch between the calls.
4. Press and select End held call to end
the call on hold.
5. To end the current call, press [ ].
Answering a second call
You can answer an incoming call while already on the
phone, if your network supports it and you have
activated the call waiting feature.p. 82
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press to switch between the calls.
3. Press and select End held call to end
the call on hold.
4. To end the current call, press [ ].
•
Use the stereo speakers on the sides of the phone to
talk and listen with the phone a short distance away.
Press [ ] to activate the Speakerphone feature. Press
the key again to switch back to the earpiece.
To communicate with answering machines or
computerised telephone systems, Send keys
must be selected.
•
Using In-call options
Press to access the following options
during a call:
• Speaker on/Normal: turn on the Speakerphone
feature or switch back to Normal mode.
• Switch to headset/Switch to phone: switch the
call to a Bluetooth headset or hands-free car kit or
back to the phone.
• Menu: access the phone's menu functions.
Voice on/Voice off: switch off the phone's
microphone so that the other person on the phone
cannot hear you, or switch it back on.
Mute keys/Send keys: switch the key tones on
or off.
Call functions
Using the Speakerphone feature
•
•
•
•
Send DTMF: send the DTMF (Dual tone multifrequency) tones as a group. The DTMF tones are
the tones used in phones for tone dialling,
sounding when you press the number keys. This
option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
Contacts: access the contact list.
End held call: disconnect the call currently on
hold.
Transfer: transfer the currently active call to a
caller on hold. The two callers can talk to each
other, but you are disconnected from the call.
29
•
•
Join: set up a multi-party call by adding a caller
on hold to a currently active call. You can include
up to 5 people on a multi-party call.
Select one: select one of multi-party call
participants. You can then use the following
options:
Private: have a private conversation with one
multi-party call participant. The other participants
can converse with each other. After the private
conversation, select Join to return to the
multi-party call.
Remove: disconnect one multi-party call
participant.
Menu functions
All menu options listed
Call log (Menu 1)
Use this menu to view the calls you have dialled,
received, or missed, and the length of calls. You can
also check the cost of your calls, if your SIM card
supports this function.
To access this menu, press in Idle mode and
select Call log.
Recent contacts (Menu 1.1)
This menu displays the most recent calls dialled,
received, or missed.
Accessing a call record
1. Press [Left] or [Right] to move to another call
type.
2. Press [Up] or [Down] to scroll through the call list.
30
3. Press [ ] to view the details of a call, or [
dial a number.
] to
Using call record options
This menu displays the most recent calls you did not
answer.
Dialled calls (Menu 1.3)
This menu displays the most recent calls you have
dialled.
Delete all (Menu 1.5)
Use this menu to delete all of the records in each call
type.
1. Press [ ] to check the call types to be cleared.
2. Press .
3. Press to confirm the deletion.
Call log (Menu 1)
Missed calls (Menu 1.2)
This menu displays the most recent calls you have
received.
Menu functions
While viewing call details, press to access
the following options:
• Call: edit the number.
• Save contact: save the number to Contacts.
• Send message: send an SMS or MMS message to
the selected number.
• Delete: delete the selected call record or all
records.
Received calls (Menu 1.4)
Call time (Menu 1.6)
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
• Last call time: check the length of your last call.
• Total dialled calls: check the total length of all
the calls you have dialled.
• Total received calls: check the total length of all
the calls you have received.
31
Menu functions
To reset the call timers, press . You need to
enter the phone password.
The password is preset to 00000000. You can
change this password.p. 86
Call cost (Menu 1.7)
This network feature displays the cost of calls. This
menu is available only if supported by your SIM card.
Note that this is not intended to be used for billing
purposes.
• Last call cost: check the cost of your last call.
• Total cost: check the total cost of all of your calls.
If the total cost exceeds the maximum cost set in
Set max. cost, you must reset the counter before
you can make another call.
• Max. cost: check the maximum cost limit set in
Set max. cost.
• Reset counters: reset the cost counters.
• Set max. cost: set the maximum cost authorised
for your calls.
• Price/Unit: set the price per unit that is applied
when the cost of your calls is calculated.
32
Contacts
(Menu 2)
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Contacts.
To access this menu, press in Idle mode and
select Contacts.
Contacts list (Menu 2.1)
Use this menu to search for numbers in Contacts.
Finding an entry
1. Enter the first few letters of the name that you
want to find.
2. Select the name from the list.
3. Scroll to a number and press [ ] to dial or [ ] to
edit contact information.
Using Contacts options
While viewing contact details, press to
access the following options:
• Edit: edit contact information.
•
•
•
Add new contact (Menu 2.2)
Storing a number in the phone’s memory
1. Select Phone.
2. Change the settings or enter information about the
contact.
• First name/Last name: assign a name.
• Mobile/Home/Office/Fax/Other: add a
number in any type.
• Email: assign an e-mail address.
• Caller ID: assign an image to alert you to a
call from the person.
Ringtone: assign a ringtone to alert you to a
call from the person.
• Group: assign the number to a caller group.
• Memo: add a memo about the person.
3. Press to save the contact.
Storing a number on the SIM card
1. Select SIM.
2. Enter information about the contact.
• Name: assign a name.
• Phone number: add a number.
• Location: assign a location number.
Contacts (Menu 2)
Use this menu to add a new contact to Contacts.
•
Menu functions
•
Send message: send an SMS or MMS message to
the selected number.
Copy to: copy the contact to the phone’s memory
or to the SIM card.
Send via: send the contact via SMS, MMS, e-mail,
or Bluetooth.
Delete: delete the selected contact.
To assign a caller ID image, ringtone, or group,
the contact must be saved to the phone’s
memory.
3. Press to save the contact.
33
Menu functions
Group (Menu 2.3)
Use this menu to organise your contacts in caller
groups.
Creating a new caller group
1.
2.
3.
4.
5.
Press and select Add.
Enter a name for the group.
Select the caller ID line and set an image.
Select the ringtone line and set a melody.
Press to save the group.
Adding members to a caller group
1.
2.
3.
4.
Select a group.
Press .
Press [ ] to check the contacts to be added.
Press .
Managing caller groups
While viewing the group list, press to
access the following options:
• View: display the members of the selected group.
34
•
•
•
•
Add: add a new group.
Edit: change the group properties.
Send message: send an SMS, MMS, or e-mail
message to the group members you want.
Delete: delete the selected group or all groups.
Group members, however, will not be deleted from
Contacts.
Speed dial (Menu 2.4)
Use this menu to assign a speed dial number (2 to 9)
for 8 of your most frequently called numbers.
Assigning speed dial numbers
1. Select a key location from 2 to 9. Key 1 is reserved
for your voicemail server.
2. Select a contact from the contact list.
3. Select a number, if the contact has more than one
number.
Using name card options
From the Speed dial screen, press to
access the following options:
• Add: assign a number to an unassigned key.
• View: check the name and number assigned to a
key.
• Change: assign a different number to a key.
• Remove: clear the speed dial setting for a key.
After saving your name card, press to
access the following options:
• Edit: edit the name card.
• Send via: send the name card via SMS, MMS,
e-mail, or Bluetooth.
• Exchange contact details: exchange name cards
with another person via Bluetooth.
• Delete: delete the name card.
In Idle mode, press and hold the appropriate key.
Own number (Menu 2.6)
My name card (Menu 2.5)
Use this feature to check your phone numbers, or to
assign a name to each of the numbers. Changes made
here do not affect the actual subscriber numbers on
your SIM card.
Use this menu to create a name card and send it to
other people.
Contacts (Menu 2)
Dialling speed dial entries
Menu functions
Managing speed dial entries
Saving your name card
The procedure for creating your name card is the
same as the one for saving a phone number in the
phone’s memory.p. 33
35
Menu functions
Management (Menu 2.7)
Applications
Use this menu to manage Contacts entries.
• Saving location: select a default memory location
for saving contacts. If you select Ask on saving,
the phone will ask you to select a memory location
each time you save a number.
• Copy all to: copy all of the contacts stored on the
SIM card to the phone’s memory, or vice versa.
• Delete all: delete all of the contacts from your
phone’s memory, your SIM card, or both.
• Memory status: check the number of contacts
you have stored in the phone’s memory and on the
SIM card.
Use this menu to play Java games, play MP3 music
files, or edit photos. You can also use convenient
features, such as a voice recorder, alarm clock,
calculator, converter, and stopwatch.
Service number (Menu 2.8)
36
Use this menu to view the list of Service Dialling
Numbers (SDN) assigned by your service provider,
including emergency numbers and numbers for
directory enquiries. This menu is available if your SIM
card supports SDN.
1. Scroll to the number you want and press .
2. Press or [ ].
(Menu 3)
To access this menu, press in Idle mode and
select Applications.
MP3 player (Menu 3.1)
Use this menu to enjoy music. First, you need to save
MP3 files into your phone’s memory or on a memory
card. To enjoy high quality music, you can use an
optional Bluetooth stereo headset.
Normal headsets are not compatible with the MP3
player.
Downloading or receiving music files
Use these methods to save MP3 files to your phone’s
memory:
• Download from the wireless webp. 45
•
The downloaded or received files are stored in the
Music folder.p. 64
Creating a play list
Playing music files
From the MP3 player screen, press [
].
Key
Function
Pauses or resumes playback.
Left
Moves back to the previous file.
Right
Skips to the next file.
Up
Opens the play list.
Down
Stops playback.
Adjusts the volume level.
Turns 3D sound on or off.
Changes the playback animation.
Changes the repeat mode.
Changes the equaliser mode.
Changes the skin type.
Turns Shuffle mode on or off.
Applications (Menu 3)
1. From the MP3 player screen, press
and select Add music from → Phone or Memory
card.
2. Press [ ] to check the files to be added and press
.
3. Press to return to the MP3 player screen.
During playback, use the following keys:
Menu functions
•
•
Download from a computer using the optional
Samsung PC StudioSamsung PC Studio User’s
Guide
Via an active Bluetooth connectionp. 85
Copy to a memory card and insert the card into the
phone.p. 22
37
Menu functions
Using MP3 player options
From the MP3 player screen, press to
access the following options:
• Play/Pause: begin or pause playback.
• Open: access the play list of the current album or
album list. On the album list, you can set up
multiple albums.
• Go to music: access the Music folder.
• Send via: send the current file via e-mail or
Bluetooth.
• Set as: set the file as your ringtone or as a
ringtone for a Contacts entry.
• Remove from playlist: remove the selected file
from the play list.
• Settings: change the default settings for playing
music files.
Repeat mode: select a repeat mode.
Shuffle: set the MP3 player to play music at
random.
MP3 background play: set the MP3 player to
continue playback even if you exit it.
38
•
Equaliser: select an equaliser setting.
3D sound: turn 3D sound on or off.
Visualisation: change the playback animation.
Skin: select a skin type.
Volume: select a volume level.
Details: access the file properties.
Accessing the play list
From the MP3 player screen, press [Up].
Press to access the following options:
• Play: play the currently selected file.
• Add to play list: add files to the play list.
• Go to album list: access the album list.
• Move to: move the selected file to another play
list.
• Copy to: copy the selected file to another play list.
• Move in playlist: move the selected file to the
position you want within the play list.
• Remove: remove the selected file or all files from
the play list.
• Details: access the file properties.
Playing MP3 files with the phone closed
Key
Playing a voice memo
Skips to the next file.
1. From the Voice recorder screen, press
and select Go to voice recorder files.
2. Select a voice memo.
Adjusts the volume.
Locks the exposed keys when held down
to keep accidental presses from affecting
playback.
During playback, use the following keys:
Key
Use this menu to record voice memos. A voice memo
can be up to one hour long.
Recording a voice memo
1. Press [
Function
Pauses or resumes playback.
Stops playback.
Voice recorder (Menu 3.2)
Applications (Menu 3)
Moves back to the previous file.
Function
Menu functions
Begins or pauses playback.
2. Speak into the microphone.
Press [ ] to pause or resume recording.
3. Press or [Down] to end recording. The
voice memo is saved automatically.
4. Press [ ] to review the voice memo, or [Up] to
record a new memo.
Press and hold [
] to launch the MP3 player. Use the
following keys to control the MP3 player:
Left
Moves backward in a memo.
Right
Moves forward in a memo.
Down
Adjusts the volume.
Stops playback.
] to start recording.
39
Menu functions
Changing the recording mode
You can change the recording mode of the voice
recorder. The maximum recording time is determined
by this setting. Before recording a memo, press
and select Settings → a recording mode:
• Limit for multimedia message: record a voice
memo for adding to an MMS message.
• Limit for email: record a voice memo for adding
to an e-mail.
• Maximum 1 hour: record a voice memo of up to
one hour.
Image editor (Menu 3.3)
Use this menu to edit your photos using various
editing tools.
Applying an effect
1. Press and select New image → Open
or Take photo.
2. Select a photo or take a new photo.
3. Press and select Effects → an effect
option.
40
4. Press .
5. Press and select Save as.
6. Enter a new file name and press .
Transforming
1. Select a photo or take a new photo.
2. Press and select Transform → an
option:
• Resize: change the photo size.
• Rotate: rotate the photo 90 degrees.
• Flip: flip the photo.
3. Press .
4. Press and select Save as.
5. Enter a new file name and press .
Cropping
1. Select a photo or take a new photo.
2. Press and select Crop.
3. Move the cropping frame to the area of the image
you want. Press and select Resize to
change the frame size.
4. Press and select .
5. Press and select Save as.
6. Enter a new file name and press .
Adding visual features
This editing tool allows you to make an outline stamp
of a photo and then merge it with another photo. You
can use this tool to create your own photo postcard by
taking a photo of a handwritten message and merging
it with a photo.
1. Select a photo or take a new photo.
Applications (Menu 3)
Merging a stamp effect
Menu functions
You can decorate photos by adding a frame, an image,
or a note.
1. Select a photo or take a new photo.
2. Press and select Insert → a feature
type.
3. Select an item or enter text to be inserted.
4. Adjust the position of the inserted item and press
.
5. Press and select Save as.
6. Enter a new file name and press .
2. Press and select Merge stamp. The
photo appears in the image box next to
as
background.
3. Press and select Add image.
4. Add a photo by selecting or taking a photo. The
added photo appears in the image box next to
as foreground.
5. Press and select Merge. The
foreground photo is added to the background
photo as an outline stamp.
6. Press to access the following stamp
edit options:
• Resize: change the stamp size.
• Move: change the position of the stamp.
• Rotate: rotate the stamp.
• Stamp color: change the stamp color.
• Shadow on: apply a shadow to the stamp.
7. When you have finished, press and
select Done.
8. Press and select Save as.
9. Enter a new file name and press .
41
Menu functions
Java world (Menu 3.4)
•
Use this menu to access the embeded Java games and
downloaded Java applications.
•
Accessing an embeded game
1. Select My games → a game.
2. Press [ ].
Using Java application options
From the application list, press to access
the following options:
• Start: launch the selected application.
• Move to: move the application to another folder.
• Delete: delete the selected application or all
applications, except for the standard games.
• Lock/Unlock: lock the application to protect it
from being deleted, or unlock the application.
• Details: access the application properties.
• Permissions: set permission settings for services
charging you additional costs, such as network
access and SMS.
42
•
•
Upgrade: upgrade the application to the latest
version.
Send information via SMS: send the URL
containing the application via SMS.
Memory status: access memory information for
applications.
Setting: select a connection profile to be used for
applications requiring network access. You can also
add or edit a profile.p. 87
World time (Menu 3.5)
Use this menu to set your local time zone and find out
what time it is in another part of the world.
Viewing world time
1. From the world map, press [Left] or [Right] to
scroll to the city you want. As the time line moves,
the time and date of the given zone display.
2. Press [ ] to save the city as your local time zone.
Applying daylight savings time
3. Press .
1. From the world map, press and select
Set daylight saving time.
2. Press [ ] to check the time zones you want.
3. Press .
Stopping an alarm
For a non-wake-up alarm, press any key.
For a wake-up alarm, press or [ ].
Press any key, except and [ ], to
cause it to sound again after 5 minutes. You can do
this a maximum of 5 times.
Setting the alarm to ring even if the phone is
off
Setting an alarm
If the phone is off when it is time for the alarm to ring,
the phone switches on and sounds the alarm.
1. Select the type of alarm.
2. Set each alarm option:
• Alarm: activate the alarm.
• Alarm time: enter the time for the alarm to
ring.
• AM/PM: Set AM or PM in 12-hour format.
• Repeat: select a repeat unit.
• Alarm tone: select an alarm tone.
Applications (Menu 3)
Use this menu to set alarms. The alert type for a
normal alarm corresponds to the call alert type
settings. A wake-up alarm is not affected by your
sound settings.
Menu functions
Alarm (Menu 3.6)
•
•
From the Alarm screen, select Auto power → On.
43
Menu functions
Calculator (Menu 3.7)
Use this menu to perform basic arithmetic functions,
such as addition, subtraction, multiplication, and
division.
1. Enter the first number.
• Press <.()> to insert a decimal point or
bracket.
• Press [ ] or [ ] to move the cursor.
2. Press one of the Navigation keys to access the
math function you want.
3. Enter the second number.
4. Press [ ] to view the result.
5. If necessary, repeat from step 2 to continue the
calculation.
44
3. Enter the value to be converted and press [Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to above
zero (+) or below zero (-).
4. Press [Left] or [Right] to select the unit to which
you want to convert.
The equivalent value for the amount you entered
displays.
For the currency converter, you can view and set
currency rates by pressing .
Timer (Menu 3.9)
Use this menu to set a period of time for the phone to
count down. The phone will sound an alarm when the
specified period of time has expired.
Converter (Menu 3.8)
Starting the timer
Use this menu for common conversions, such as
currency and temperature.
1. Select a converter.
2. Press [Left] or [Right] to select the original unit
and press [Down].
1. Press .
2. Enter the length of time you want to count down
and press .
3. Press [ ] to start counting down.
Stopping the timer
•
•
•
•
Stopwatch (Menu 3.10)
SIM AT (Menu 3.12)
This menu is available if you use a SIM AT card that
supports SIM Application Tool kit menus and provides
additional services, such as news, weather, sports,
entertainment, and location services. Available
services may vary, depending on your service
provider’s plans. For details, see your SIM card
instructions or contact your service provider.
Browser (Menu 4)
Use this menu to measure elapsed time. The
maximum time is 10 hours.
1. Press [ ] to start the stopwatch.
2. Press [ ] to check an interval. You can repeat this
step for a total of 4 intervals.
Go to My Items: access the corresponding file
folder.
Details: access the properties of the licence key.
Menu functions
Press any key when the timer rings.
Press [ ] on the Timer screen to stop the timer
before it rings.
Key management (Menu 3.11)
Use this menu to manage the license keys you have
acquired to activate media contents locked by DRM
systems.
Press to access the following options:
• View: open the corresponding media content.
• Delete: delete the selected licence key.
• Go to My Messages: access the message
containing the media content.
Browser
(Menu 4)
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
From the wireless web, you can access up-to-date
information and a wide variety of media content, such
as games, wallpapers, ringtones, and music files.
To access this menu, press in Idle mode and
select Browser.
45
Menu functions
Home (Menu 4.1)
Use this menu to connect your phone to the network
and load the homepage of the wireless web service
provider. You can also press and hold [ ] in Idle
mode.
Navigating the web browser
To
Press
scroll through browser
items
[Up] or [Down].
select a browser item
[ ], or and
select Go to.
return to the previous
page
, or
and select Go → Back.
move to the next page
and select Go
→ Forward.
•
•
•
Using page options
From any web page, press to access the
following options:
46
•
•
•
•
•
•
•
•
Go to: access the linked web page.
Go to homepage: return to the homepage.
Enter URL: enter a URL address manually.
Go: move backward or forward through pages in
history.
Reload: reload the current page with updated
information.
Bookmarks: bookmark the current page or access
the bookmark list.
Send URL: send the URL of the current page via
SMS or e-mail.
To DesktopView/To SmartFitView: change the
display mode of the browser.
Save: save the selected image or page.
Page details: access the page properties.
Browser options: change the various settings for
the browser.
Cache: change the cache mode or clear the cache.
A cache is a temporary memory that stores
recently accessed web pages.
Press [
] to exit the browser.
Use this menu to save URL addresses in order to
quickly access web pages.
Adding a bookmark
1. Press . If a bookmark has already been
saved, press and select Add
bookmark.
2. Enter a title for the bookmark and press [Down].
3. Enter a URL address and press .
Accessing a bookmarked page
Enter URL (Menu 4.2)
Selecting a bookmark item launches the web browser
and access the associated web page.
Use this menu to manually enter a URL address and
access the associated web page.
Using bookmark options
You can add the entered URL to the Bookmark list by
selecting Add bookmark.
Browser (Menu 4)
Exiting the browser
Bookmarks (Menu 4.3)
Menu functions
Cookies: change the cookie acceptance mode or
delete cookies. Cookies are pieces of personal
information sent to a web server while navigating
the web.
Preferences: change the browser display and
sound settings.
Certificates: access certificate information.
About browser: access version and copyright
information about the browser.
After saving an item, press to access the
following options:
• Go to: access the bookmarked web page.
• Go to homepage: access the homepage.
• Enter URL: enter a URL address manually.
• Edit bookmark: edit the URL address and title of
the bookmark.
47
Menu functions
•
•
•
Add bookmark: add a new bookmark.
Send URL: send the URL address of the bookmark
via SMS or e-mail.
Delete: delete the selected bookmark or all
bookmarks.
Use this menu to select a connection profile to be used
for accessing the wireless web. You can also add or edit
a profile.p. 87
Saved pages (Menu 4.4)
Messages (Menu 5)
While offline, you can access the list of pages you have
saved during a navigation while viewing a page offline
press and select Go To to access the page
online.
Use the Messages menu to send and receive text
messages, multimedia messages, and e-mails. You
can also use push message and cell broadcast
message features.
History (Menu 4.5)
To access this menu, press in Idle mode and
select Messages.
You can access the list of pages you have accessed
recently.
Create message (Menu 5.1)
Select a URL from the list to access the corresponding
web page.
Use this menu to create and send messages.
Clear cache (Menu 4.6)
Short Message Service (SMS) allows you to send or
receive text messages that may include simple
pictures, animated images, and melodies.
Use this menu to clear information stored in the cache.
48
Browser settings (Menu 4.7)
Text message (Menu 5.1.1)
1. Enter your message.
Multimedia Message Service (MMS) delivers messages
containing a combination of text, image, video, and
audio, from phone to phone or from phone to e-mail.
1. Select the Subject line.
2. Enter the message subject and press [ ].
3. Select the Image and Video or Sound line and
add an image, a video, or a sound file.
• The maximum size allowed for a message can
differ, depending on the country.
• Depending on the file type or DRM (Digital
Rights Management) system, some files may
not be able to be forwarded.
Messages (Menu 5)
2. Press to access the following options
for creating a message:
• Insert: add a template, Contacts entry, or
bookmark.
• Add image/Add animation/Add melody:
attach a simple image, animated image, or
melody.
• Attach: attach a name card or calender data
as a data format attachment.
• Text style: change the text attributes.
3. When you have finished, press and
select Save and send or Send only.
4. Enter a destination number.
To send the message to more than one recipient,
fill in additional destination fields.
5. Press [ ] to send the message.
Multimedia message (Menu 5.1.2)
Menu functions
The maximum number of characters allowed in a
message varies by service provider. If your
message exceeds the maximum number of
characters, the phone will split the message.
4. Select the Message line
5. Enter the message text and press [ ].
6. Press to access the following options
for editing the message:
• Edit: edit the subject or text of your message.
• Change image/Change video/Change
sound: replace an added item.
49
Menu functions
•
Add memory card: add a file stored a
memory card, if inserted.
• Add page: add pages. Move to each page by
pressing [Left] or [Right].
• Delete page: delete an added page.
• Edit page: change the duration of page display
or move the page forward among the other
pages.
• Attach: attach Contacts entry as name cards
or calender data as data format attachments,
or document files stored in the Other files
folder.
• Remove subject/Remove message/
Remove media/Remove sound: remove an
added item.
7. When you have finished, press and
select Send.
8. Enter a phone number or e-mail address.
To send the message to more than one recipient,
fill in additional destination fields.
9. Press [ ] to send the message.
50
Email (Menu 5.1.3)
You can create and send e-mails that include text,
audio, and images. To use this feature, you need to
subscribe to an e-mail service and set up your e-mail
account and profile.p. 60
1. Select the Subject line.
2. Enter the subject of your e-mail and press [ ].
3. Select the Message line.
4. Enter the e-mail text and press [ ].
5. Select the File attached line and select one of the
following options to add files:
• Add image/Add video/Add sound/Add
music: add media files stored in the phone’s
memory.
Depending on the file type or DRM (Digital
Rights Management) system, some files may
not be able to be forwarded.
•
•
Other files: add document files stored in the
Other files folder.
Memory card: add files stored on a memory
card, if inserted.
•
6.
9.
Use this menu to access messages you have received,
sent, or which have failed in sending.
Inbox (Menu 5.2.1)
This folder stores all of the messages you have
received, except for e-mails.
Viewing a message
The following icons may appear on the message list to
show the message type:
•
SMS
•
MMS
•
MMS notification ( : Being retrieved,
: Failed to retrieve)
•
Voicemail
•
Push message from web servers.
•
Configuration message, containing network
parameters from the service provider.
•
CB (Cell broadcast) message from your
service provider
•
Delivery report for your sent messages
Messages (Menu 5)
8.
My messages (Menu 5.2)
Menu functions
7.
Attach: attach name cards or calender data as
data format attachments.
Press to access the following options
to edit the e-mail:
• Edit: edit the subject or text.
• Remove subject/Remove message: clear
the subject or text.
• Remove attachment: delete the selected
attachment.
• Remove all attachments: delete all
attachments.
When you have finished, press and
select Send.
Enter an e-mail address.
To send the e-mail to more than one recipient, fill
in additional destination fields.
Press [ ] to send the e-mail.
51
Menu functions
• Depending on the DRM (Digital Rights
Management) system, messages having web
content may not be able to be forwarded.
• A ! icon next to a message means that the
message is of high priority. A grey-coloured
message icon indicates low priority.
Using message options
While viewing a message, press to access
the following options:
SMS messages
• Reply via: reply to the sender via SMS or MMS.
• Forward: forward the message to other people.
• Delete: delete the message.
• Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
• Copy entry: extract URLs, e-mail addresses, or
phone numbers from the message.
• Copy media: save media content from the
message to your phone’s memory.
52
•
•
Protection: protect the message from being
deleted. You can protect only those messages
stored in the phone’s memory.
Block number: add the sender’s number to the
Block list to reject the messages from the sender.
MMS messages/MMS notifications
• Retrieve: retrieve the MMS message from the
MMS server.
• Reply via text message: send a reply via SMS.
• Reply via multimedia message to: send a reply
via MMS.
• Forward: forward the message to other people.
• Delete: delete the message.
• Copy address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Copy media: save media content from the
message to your phone’s memory.
• Protection: protect the message from being
deleted.
• Properties: access the message properties.
CB messages
• Save: save the message to the phone’s memory.
• Delete: delete the message.
• Copy entry: extract URLs, e-mail addresses, or
phone numbers from the message.
Drafts (Menu 5.2.2)
This folder stores messages you have saved to send at
a later time.
When you select a message, it opens in Edit mode so
that you can edit and send the message.
Messages (Menu 5)
Push messages
• Go to URL: connect to the URL specified in the
message.
• Delete: delete the message.
• Copy address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Protection: protect the message from being
deleted.
Delivery reports
• Delete: delete the report.
• Copy entry: extract URL, e-mail addresses, or
phone numbers from the report.
• Protection: protect the report from being deleted.
Menu functions
Configuration messages
• Install: apply the configuration specified in the
message to your phone.
• Copy address: extract the URLs, e-mail
addresses, or phone numbers from the message.
• Delete: delete the message.
Outbox (Menu 5.2.3)
This folder stores messages that the phone is
attempting to send or has failed to send.
The following icons are available to show the message
status:
•
Being sent
•
Failed to send
While viewing a message, press to access
the following options:
• Send again: retry sending the message.
53
Menu functions
•
•
•
•
•
Forward: forward the e-mail to other people.
Copy entry: extract URLs, e-mail addresses, or
phone numbers from the message.
Delete: delete the message.
Protection: protect the message from being
deleted.
Details: access the message properties.
Sent messages (Menu 5.2.4)
This folder stores messages that you have sent.
While viewing a message, press to access
the following options:
• Open file: open the selected file.
• Save file: save the selected file.
• Forward: forward the message to other people.
• Copy entry: extract URLs, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
• Move to phone/Move to SIM: move the SMS
message between the SIM card and the phone’s
memory.
54
•
•
Protection: protect the message from being
deleted.
Details: access the message properties.
Email inbox (Menu 5.2.5)
This folder stores e-mails that you have received.
Viewing an e-mail
1. Select an e-mail account.
2. Press when Check for new email
displays, or press and select Check
for new mail. The phone checks the e-mail server
and downloads new e-mails.
The following icons may appear on the list to show
the e-mail status:
•
Retrieved from the server
•
Being retrieved
•
Failed to retrieve.
A ! icon next to a message means that the
message is of high priority. A grey-coloured
message icon indicates low priority.
3. Select an e-mail or header.
4. Press [ ] or [ ] to view other pages in the
e-mail.
5. Press [Left] or [Right] to view the previous or next
e-mail.
My folders (Menu 5.2.6)
Use this menu to create new folders and organise your
messages.
Creating a new folder
1. Press .
2. Enter a folder name and press .
Using folder options
Messages (Menu 5)
While viewing the e-mail or header, press
to access the following options:
• Retrieve: retrieve the body of the e-mail from the
e-mail server.
• Reply: send a reply to the sender or to the sender
and all of the other recipients.
• Forward: forward the e-mail to other people.
• Delete: delete the e-mail.
• Add to filtering list: add the sender’s e-mail
address or subject to the Block list to reject emails from that address or containing that subject.
• Copy entry: extract URLs, e-mail addresses, or
phone numbers from the e-mail.
• Copy media: save the attached files from the
e-mail to your phone’s memory.
Protection: protect the e-mail from being deleted.
Details: access the e-mail properties.
Menu functions
Using e-mail options
•
•
On the folder list, press to access the
following options:
• Open: open the selected folder.
• Add folder: add a new folder.
• Rename folder: change the folder name.
• Delete: delete the selected folder.
55
Menu functions
Templates (Menu 5.3)
Multimedia message templates (Menu 5.3.2)
Use this menu to make and use templates of
frequently used messages.
You can access embedded MMS templates or ones you
have saved so that you can use them in composing an
MMS message.
Text message templates (Menu 5.3.1)
You can create SMS templates with the sentences you
use frequently so that you can retrieve and insert
them when composing an SMS message.
Creating a template
1. Select an empty location.
2. Enter a message and press .
Using template options
From the template list, press to access
the following options:
• Edit: edit the selected template.
• Send message: create and send a new message.
• Delete: delete the selected template.
• Add new: add a new template.
56
From the template list, press to access
the following options:
• View: open the selected template.
• Edit: edit the template.
• Send: create and send a new message.
• Delete: delete the selected template or all
templates.
Delete all (Menu 5.4)
Use this menu to delete messages in each message
folder all at once.
1. Press [ ] to check the message folders to be
cleared.
Pressing the key twice displays the message types
so that you can specify the ones to be cleared.
2. Press .
3. Press [ ] to select the check box to delete
protected messages, and then press .
4. Press to confirm the deletion.
Use this menu to set up various options for using the
messaging service.
Text message (Menu 5.5.1)
•
•
Messages (Menu 5)
You can configure SMS settings.
• Send settings: set up the options for sending
SMS messages:
Reply path: allow recipients to reply to you
through your SMS server.
Delivery report: set the network to inform you
when your messages have been delivered.
Character support: select a character encoding
type. If you select Automatic, the phone switches
the encoding type from GSM-alphabet to uni-code
if you enter a uni-code character. Use of uni-code
encoding will reduce the maximum number of
characters in a message to about half.
•
Menu functions
Settings (Menu 5.5)
If this menu is not shown, your phone provides
automatic character encoding by default.
Bearer selection: select either GSM or GPRS
preferred, depending on your network.
Block number: store the phone numbers from
which you want to reject messages.
Current profile: select an SMS setting profile.
Profile settings: set the properties of each
profile.
Service centre: store or change the number of
your SMS server.
Default destination: enter the default
destination.
Default type: set the default message type. The
network can convert the messages into the
selected format.
Default validity: set the length of time your
messages are stored in the SMS server.
Setting name: enter a profile name.
57
Menu functions
Multimedia message (Menu 5.5.2)
You can configure MMS settings.
• Sending settings: set up the options for sending
MMS messages:
Delivery report: set the network to inform you
when your messages have been delivered.
Hide address: set your address to be hidden from
the recipient’s phone.
Read reply: send a read-reply request along with
your messages.
Priority: set the priority level of messages.
Expiry date: set the length of time messages are
stored in the MMS server.
Delivery time: set a time delay before messages
are sent.
Outgoing message size: select a maximum size
of attached items allowed for messages.
• Retrieve settings: set up the options for
receiving MMS messages:
Reject unknown senders: reject messages from
unknown senders.
58
•
Allow adverts: accept advertisements.
Allow information: accept information
messages.
Allow personal: accept personal messages.
Allow Reports: set the network to inform the
sender when a message has been delivered to you.
Recep. in home network: determine if your
phone retrieves new messages automatically when
you are in your home service area.
Reception when abroad: determine if your
phone retrieves new messages automatically when
you are roaming on another network.
Reception within home network or abroad has the
following options:
- Manual: the phone displays notifications. Use
the Retrieve option to manually download new
messages.
- Automatic: the phone automatically retrieves
messages from the server.
- Reject: the phone rejects all messages.
Profile: select a connection profile to be used for
MMS. You can also add or edit a profile.p. 87
•
Email (Menu 5.5.3)
You cannot change e-mail profile and account
settings while an e-mail is being sent or retrieved.
•
Sending settings: set up the options for sending
e-mails:
Send copy to self: send a copy of your e-mails to
your e-mail account.
Delivery confirm: set the network to inform you
when your e-mails have been delivered.
Read confirm: send a read-reply request along
with e-mails.
•
Messages (Menu 5)
You can configure default e-mail settings.
Reply to address: set an e-mail address to
receive read-reply messages from recipients.
Priority: select the priority level of e-mails.
Include signature: attach your name, phone
number, a simple memo, or a tag line to your
e-mails.
Edit name: edit the name in your signature.
Edit number: edit the phone number in your
signature.
Edit note: edit the tag line in your signature.
Reception settings: set up the options for
receiving e-mails:
Check interval: determine how often the phone
checks the server for incoming e-mails. If you
select Do not notify, use the Check for new
email option to receive new e-mails manually.
Read reply: determine whether or not the phone
sends a read-reply for incoming e-mails. If you
select Reply reminder, the phone reminds you to
send a read-reply.
Menu functions
Creation mode: select an MMS creation mode.
Free: you can create and send messages using
unsupported file formats.
Restricted: you are not able to create and send
messages using unsupported file formats.
Warning: the phone informs you when you create
and send a message using unsupported file
formats.
59
Menu functions
•
•
60
Reject if larger than: determine the maximum
size for incoming e-mails. Your phone will reject
e-mails that exceed the specified size.
Download method: set whether the phone
downloads e-mail headers only or e-mail headers
and bodies borh.
Leave copy of messages on server: leave
copies of e-mails on the e-mail server after
retrieving.
Block list: specify e-mail addresses or subjects
you want to reject.
Email account: set up an e-mail account and
select an account to be used.
Current account: select an account.
Account settings: configure e-mail accounts
using different e-mail servers. Set the options for
each account:
Account name: enter a name for the currently
selected account.
User name: enter a user name.
Email address: enter your e-mail address.
SMTP server: enter the IP address or domain
name of the outgoing e-mail server.
SMTP port: enter the SMTP port number.
Connect to POP3 server first: connect to the
POP3 server before connecting to the SMTP server
to send e-mails.
Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
When the protocol type is POP3:
POP3 server: enter the IP address or domain
name of the server that receives your e-mail.
POP3 port: enter the POP3 port number.
User ID: enter the POP3 user name.
Password: enter the POP3 password.
Use SMTP authentication: enable SMTP
authentication, which requires the user to login
before sending e-mails.
Same as POP3: select if you want the SMTP
server to have the same parameters as the POP3
server.
•
Include attachments: select this option to
receive attachments with e-mails.
Email retrieval limit: set the number of headers
you will retrieve from the server.
Secure connection: use a secured connection for
e-mail service.
Email profile: select a connection profile to be
used for e-mail services. You can also add or edit a
profile.p. 87
Menu functions
Push message (Menu 5.5.4)
Messages (Menu 5)
SMTP user ID: enter the SMTP user name.
SMTP password: enter the SMTP password.
APOP login: connect to the server by using the
APOP login scheme.
Secure connection: use a secure connection for
the e-mail service.
When the protocol type is IMAP4:
IMAP4 server: enter the IP address or domain
name of the server that receives your e-mail.
IMAP4 port: enter the IMAP4 port number.
User ID: enter the IMAP4 user name.
Password: enter the IMAP4 password.
Use SMTP authentication: enable SMTP
authentication, which requires the user to login
before sending e-mails.
Same as POP3: select if you want the SMTP
server to have the same parameters as the IMAP4
server.
SMTP user ID: enter the SMTP user name.
SMTP password: enter the SMTP password.
You can change the settings for receiving push
messages from the wireless web server.
• Receive: set how your phone receives push
messages.
• Black list: manage blocked server addresses.
Broadcast (Menu 5.5.5)
You can change the settings for receiving CB
messages.
• Receive: select to receive CB messages, or not.
61
Menu functions
•
•
Channel list: indicate the channels from which
you wish to receive CB messages. Please contact
your service provider for further details.
Language: select the preferred languages in
which CB messages display.
Memory status (Menu 5.6)
Use this menu to view the amount of memory
currently in use in each folder.
File manager (Menu 6)
The File manager menu allows you to access images,
videos, music files, and sound files stored in the
phone’s memory or on a memory card.
To access this menu, press in Idle mode and
select File manager.
Tips for Digital Rights Management
62
As a result of the Digital Rights Management (DRM)
system, some of the media items you download from
the Internet or receive by MMS may require a license
key to access them.
You can acquire the key from the website which owns
the rights to the content; use the Activate key
option.
Note the following icons on the list:
•
: Forwardable item with a valid key.
•
: Forwardable item without a valid key.
•
: Unforwardable item with a valid key.
•
: Unforwardable item without a valid key.
Your service provider supports only count-based or
unlimited-access DRM files.
Images (Menu 6.1)
This menu displays photos you have taken and images
you have downloaded, received in messages, or
imported from your computer.
Viewing an image
1. Select an image folder.
2. Select an image.
Viewing a slide show
Using image options
•
•
•
•
•
Delete: delete the file.
Rename: change the file name.
Move to: move the file to another folder or to a
memory card.
Copy to: copy the file to a memory card.
Visible to Bluetooth: share the file or all files
with other Bluetooth devices.
Protection: protect the file from being deleted.
Details: access the file properties.
Key management: manage the license keys you
have acquired.
File manager (Menu 6)
While viewing an image, press to access
the following options:
• List: return to the image list.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as: set the image as wallpaper for the displays
or as a caller ID image for a Contacts entry.
• Edit: edit the image using the Image editor if it is
a photo taken by the camera on the phone.
p. 40
• Activate key: get a license key when the key for
the selected DRM file expires.
•
•
•
Menu functions
You can view your photos as a slide show.
1. Select an image filder.
2. Press and select Slide show.
3. Select an interval option.
The slide show begins.
4. Press to stop the slide show.
Videos (Menu 6.2)
This menu displays video clips you have recorded,
downloaded, received in messages, or imported from
your computer.
Video clips recorded on other devices, such as
camcorders, may not play correctly.
Playing a video clip
1. Select a video folder.
2. Select a video clip.
63
Menu functions
During playback, use the following keys:
Key
Function
Pauses or resumes playback.
Left
Right
Down
Moves backward in a file.
Skips forward in a file.
Adjusts the volume.
Stops playback.
Using video options
From a video screen, press to access the
following options:
• List: return to the video list.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as wallpaper: set the video clip, if saved as a
3gp file, as wallpaper for the main display.
• Activate key: get a license key when the key for
the selected DRM file expires.
64
•
•
•
•
•
•
•
•
Delete: delete the file.
Rename: change the file name.
Move to: move the file to another folder or to a
memory card.
Copy to: copy the file to another folder or to a
memory card.
Visible to Bluetooth: share the file or all files
with other Bluetooth devices.
Protection: protect the file from being deleted.
Details: access the file properties.
Key management: manage the license keys you
have acquired.
Music (Menu 6.3)
This menu displays MP3 files you have downloaded or
imported from your computer.
Select a file. The MP3 player opens.p. 37
•
This menu displays voice memos you have recorded,
and sound files you have downloaded, received in
messages, or imported from your computer.
•
Playing a sound clip
1. Select a sound folder.
2. Select a sound clip. For a voice memo, see Voice
recorder. p. 39
From a sound screen, press to access the
following options:
• List: return to the sound list.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Activate key: get a license key when the key for
the selected DRM file expires.
• Delete: delete the file.
• Rename: change the file name.
•
•
•
File manager (Menu 6)
Using sound options
•
Move to: move the file to another folder or to a
memory card.
Copy to: copy the file to another folder or to a
memory card.
Visible to Bluetooth: share the files with other
Bluetooth devices.
Protection: protect the file from being deleted.
Details: access the file properties.
Key management: manage the license keys you
have acquired.
Menu functions
Sounds (Menu 6.4)
Other files (Menu 6.5)
Use this menu to view various document files and files
stored in the phone’s memory without corruption.
Available file formats are DOC, XLS, PPT, PDF, and TXT.
Viewing a file
Select a file. Picsel File Viewer runs to open the
document.
Depending on the file size or memory capacity of
Picsel File Viewer, a file may not open properly.
65
Menu functions
Use the following keys to view the document:
Key
Function
Up/Down/
Left/Right
Pans around the page.
Zooms in or out.
•
•
•
•
•
Fits the document to the page size.
Returns to the first page.
Returns to the previous page.
Rotates the document.
Moves to the next page.
Moves to the last page.
Changes the display to Full screen
view or Normal screen view.
Using document options
66
While viewing a document, press to
access the following options:
• Full screen view: change the display to Full
screen view.
•
•
•
•
•
•
•
•
•
Zoom: zoom in or out.
Fit to: fit the document to the page size, screen
width, or screen height.
Go to: move to another page of the document.
Rotate: rotate the document.
Screen panning/Normal panning: change the
panning mode to by screen or by preset picsel.
Send via: send the file via MMS, e-mail, or
Bluetooth.
Move to memory card: move the file to a
memory card.
Copy to memory card: copy the file to a memory
card.
Delete: delete the selected file or all files.
Rename: change the file name.
Visible to Bluetooth: share the file or all files
with other Bluetooth devices.
Protection: protect the file from being deleted.
Details: access the file properties.
Shortcuts: view the functions of the keys you can
use in Picsel File Viewer.
Memory card (Menu 6.6)
Selecting a day
Use this menu to access the files stored in a memory
card. This menu is shown only when a memory card is
inserted into the phone.
•
•
•
Memory status (Menu 6.7)
Using calendar options
Use this menu to view memory information for media
items in the phone’s memory or on a memory card.
For the phone’s memory press [Left] or [Right] to view
the memory status by size or number of items.
Press to access the following options:
• View mode: change the view mode of the
calendar.p. 70
• Create: add a new event.next section
• Go to: select today’s date or enter a specific date.
• Sort by: sort items by type of event.
• Delete: delete the items stored on the calendar by
using various deleting options.
To access this menu, press in Idle mode and
select Calendar.
Consulting the calendar
When you enter the Calendar menu, the calendar in
Month view appears with today’s date indicated by a
blue box.
Calendar (Menu 7)
The Calendar menu enables you to keep track of your
schedule.
Menu functions
Calendar (Menu 7)
Press [Left] or [Right] to move by day.
Press [Up] or [Down] to move by week.
Press [ / ] to move by month.
You can delete recurring events in Day view only.
•
•
Missed alarm events: view events whose alarms
you have missed.
Memory status: access memory information for
the event items stored on the calendar.
67
Menu functions
Creating an event
You can store scheduled events, anniversaries,
memos, and To do items on the calendar. More than
one event per day can be stored.
Entering a new scheduled event
1. Select a date on the calendar.
2. Press and select Create → Schedule.
3. Enter information or change the settings:
• Subject: enter a title for the event.
• Details: enter event details.
• Start date and Start time: enter the starting
date and time for the event.
• AM/PM: select AM or PM in 12-hour time
format.
• End date and End time: enter the ending date
and time for the event.
• AM/PM: select AM or PM in 12-hour time
format.
• Location: enter information about the event
location.
• Alarm: set an alarm for the event.
68
Before: set how long before the event the
alarm is to alert you.
• Alarm tone: select an alarm tone.
• Repeat: set the event to recur and select a
repeat unit.
• Until: set the ending date, if the event will
recur.
4. Press to save the event.
•
Entering a new anniversary
1. Select a date on the calendar.
2. Press and select Create →
Anniversary.
3. Enter information or change the settings:
• Occasion: enter information about the
anniversary.
• Date: enter the date.
• Alarm: select to set an alarm for the
anniversary.
• Before: set how long before the event the
alarm is to alert you.
• Alarm time: enter the time for the alarm to
ring.
•
Entering a memo
Entering a To do item
1. Select a date on the calendar.
2. Press and select Create → To do.
3. Enter information or change the settings:
• To do: enter information about the item.
• Start date: enter the starting date.
• Due date: enter the ending date.
• Select priority: select a priority level.
4. Press to save the event.
Once you have scheduled events, the event icons and
the number of events for a specific day appears at the
bottom of the calendar.
•
Scheduled event
•
Anniversary
•
To do item
•
Memo
Accessing an event
1. Select a date on the calendar to display the events
for the day.
2. Select an event to view its details.
3. Press [Left] or [Right] to access the other events
scheduled for the selected day.
Calendar (Menu 7)
1. Select a date on the calendar.
2. Press and select Create → Memo.
3. Enter a memo and press .
Viewing an event
Menu functions
AM/PM: select AM or PM in 12-hour time
format.
• Alarm tone: select an alarm tone.
• Repeat every year: set the phone to remind
you of the anniversary every year.
4. Press to save the event.
Using event options
While viewing an event, press to access
the following options:
• Edit: edit the event.
• Create: add a new event.
• Send via: send the event via SMS, MMS, e-mail,
or Bluetooth.
69
Menu functions
•
•
•
View mode: change the view mode of the
calendar.
Delete: delete the event.
Memory status: access memory information for
the events stored on the calendar.
You can view events for the selected week. A cell on
the timetable indicates the presence of a schedule
item. Select a cell in the day you want.
Viewing an event in a different mode
Camera (Menu 8)
You can change the calendar display to Day view or
Week view. Press and select View mode
→ a view mode.
You can use the camera module embedded in your
phone to take photos and record videos.
Day view
You can view events for the selected date. Select an
event to view its details.
The following icons may display to indicate the event
status:
•
Alarm set
•
Recurring event
•
To do item priority (Red: high, Blue: normal,
Grey: low)
•
Completed To do item
70
Week view
To access this menu, press in Idle mode and
select Camera, or press [ ].
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are
not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
In Capture mode, press < > to access the following
options:
• Record video: switch to Record mode.
• Shooting mode: take a photo in the following
modes:
Single shot: take a photo in normal mode. You
can select whether or not the camera automatically
saves a photo.
Multi shot: take a series of action stills. You can
select the number of photos the camera will take
and the shutter speed.
Mosaic shot: take several stills and save them in
one frame. You can select the layout.
• Effects: change the colour tone or apply a special
effect.
• Frames: apply a decorative frame.
• Flash: determine the use of the flash.
• Timer: set a time delay before the camera takes a
photo.
• Go to photos: access the Photos folder.
When you take a photo in direct sunlight or in bright
conditions, shadows may appear on the photo.
1. Access the Camera menu or press and hold [ ]
to turn on the camera.
2. Adjust the image to be captured.
• Press < > to access camera options.
next section.
• Use the keypad to change the camera settings
or switch to other modes.p. 72
3. Press [ ] to take a photo. The photo is saved in
the Photos folder.
4. To
Press
access photo options
.p. 73
delete the photo
[C] and then .
return to Capture mode
.
Camera (Menu 8)
Using camera options in Capture mode
You can take photos in various modes. The camera
produces JPEG photos.
Menu functions
Taking a photo
71
Menu functions
•
72
Settings: change the default settings for taking a
photo.
Size: select an image size.
Quality: select an image quality setting.
Viewfinder: select a preview screen.
Shutter sound: select the sound that you hear
when you press the shutter release, [ ].
Zoom sound: turn the sound effect for zooming
on or off.
Brightness sound: turn the sound effect for
brightness adjustment on or off.
White balance: adjust the colour balance of the
image. You can make your photo appear warmer
or cooler.
ISO: change the ISO setting, which controls the
sensitivity of your camera. For low light situations,
lower the ISO number to increase image quality.
The higher the ISO number, the faster the camera
shutter functions and the more sensitive the
camera is to light. Higher ISO settings may bring
some distortion to an image.
•
Save: select the memory location to store photos,
if a memory card is inserted.
Shortcuts: view the functions of the keys you can
use in Capture mode.
Using the keypad in Capture mode
You can use the keypad to customise your camera
settings in Capture mode.
Key
Function
Left/Right
Adjusts the image brightness.
Up/Down
Zooms in or out.
Flips the image vertically.
Shows the mirror image.
Switches to Record mode.p. 74
Changes the image size.
Changes the image quality.
Changes the shooting mode.
Changes the colour tone or applies a
special effect.
Function
•
Changes the ISO setting.
Selects a decorative frame.
Sets the timer.
Goes to the Photos folder.p. 62
•
•
•
•
•
Determines the use of the flash.
Changes the preview screen.
Using photo options
After saving a photo, press to access the
following options:
• View: access one of the multi-shot photos.
• Take another: return to Capture mode.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as: set the photo as wallpaper for the displays
or as a caller ID image for a Contacts entry.
Taking a photo with the phone closed
1. Press and hold [ ].
2. If necessary, press [
3. To
] to highlight
Camera (Menu 8)
Changes the white balance.
Edit: edit the photo using the Image editor.
p. 40
Delete: delete the file.
Rename: change the file name.
Go to photos: access the Photos folder.
Protection: protect the file from being deleted.
Details: access the file properties.
Menu functions
Key
Press
flip the image vertically
[ ].
show the mirror image
].
turn the flash on or off
and hold [ /
adjust the brightness
].
zoom in or out
].
4. Press [ ] to take a photo. The photo is
automatically saved.
].
73
Menu functions
Recording a video
Using camera options in Record mode
You can record a video of what is displayed on the
camera screen and save it.
1. In Capture mode, press [1].
2. Adjust the image to be captured.
• Press < > to access camera options.
next section.
• Use the keypad to change the camera settings
or switch to other modes.p. 75
3. Press [ ] to start recording.
4. Press [ ] or < > to stop recording. The video is
automatically saved in the Video clips folder.
In Record mode, press < > to access the following
options:
• Take photo: switch to Capture mode.
• Effects: change the colour tone or apply a special
effect.
• Flash: determine the use of the flash.
• Timer: set a time delay before the camera starts
recording.
• Go to videos: access the Video clips folder.
• Settings: change the following settings for
recording a video:
Recording mode: select a video recording mode.
Select Limit for MMS/Wallpaper to record a
video suitable for messaging or for setting as
wallpaper. The video clip is saved in 3GP format.
Select Normal to record a video within the limit of
the currently available memory. The video clip is
saved in MP4 format.
Size: select a frame size.
Quality: select an image quality setting.
5. To
74
Press
play back the video clip
access video options
.p. 76
].
delete the video clip
[C] and then .
return to Record mode
.
Key
Function
Flips the image vertically.
Shows the mirror image.
Switches to Capture mode.p. 71
Changes the frame size.
Changes the image quality.
Changes the video recording mode.
Changes the colour tone or applies a
special effect.
Mutes or unmutes audio.
Using the keypad in Record mode
Sets the timer.
You can use the keypad to customise your camera
settings in Record mode:
Goes to the Video clips folder.p. 63
Key
Function
Left/Right
Adjusts the image brightness.
Up/Down
Zooms in or out.
Camera (Menu 8)
Menu functions
•
Viewfinder: select a preview screen.
Audio record: record audio with a video clip.
Zoom sound: turn the sound effect for zooming
on or off.
Brightness sound: turn the sound effect for
brightness adjustment on or off.
White balance: adjust the colour balance of the
image. You can make your video appear warmer or
cooler.
Save: select the memory location to store video
clips, if a memory card is inserted.
Shortcuts: view the functions of the keys you can
use in Record mode.
Changes the preview screen.
Determines the use of the flash.
Changes the white balance.
75
Menu functions
Using video options
After saving a video clip, press to access
the following options:
• Record another: return to Record mode.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as wallpaper: set the video clip, if saved as a
3GP file, as wallpaper for the main display.
• Delete: delete the file.
• Rename: change the file name.
• Go to videos: access the Video clips folder.
• Protection: protect the file from being deleted.
• Details: access the file properties.
Recording a video with the phone closed
1. Press and hold [ ].
2. If necessary, press [
] to highlight
3. Aim the camera lens at the subject.
4. To
Press
flip the image vertically
[ ].
show the mirror image
[ ].
turn the flash on or off
and hold [ / ].
adjust the brightness
].
zoom in or out
].
5. Press [ ] to start recording.
6. Press [ ] to stop recording. The video clip is
automatically saved.
Settings (Menu 9)
The Settings menu provides you with various setting
options to customise the phone to your preferences
and needs. You can also reset the settings to their
default status.
To access this menu, press in Idle mode and
select Settings.
76
Time and date (Menu 9.1)
Greeting message (Menu 9.2.2)
Use this menu to change the time and date displayed
on your phone. Before setting the time and date,
specify your time zone in the World time menu.
p. 42
• Set time: enter the current time.
• AM/PM: select AM or PM in 12-hour time format.
• Time format: select a time format.
• Set date: enter the current date.
• Calendar starting day: set which day of the
week the calendar starts with.
Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
Phone settings (Menu 9.2)
Press to access the following options:
• Change: assign or change a shortcut menu.
• Remove: deactivate the shortcut assignment to
the selected key.
• Remove all: deactivate all shortcut assignments.
Use this menu to select one of several languages for
the display text.
You can use the Navigation keys as shortcuts to access
specific menus directly from Idle mode. Use this menu
to assign a shortcut to a key.
Assigning a shortcut menu
1. Select a key to be used as a shortcut key.
2. Select the menu to be assigned to the key.
Settings (Menu 9)
Language (Menu 9.2.1)
Menu functions
Many different features of your phone’s system can be
customised to suit your preferences.
Shortcut (Menu 9.2.3)
Using shortcut options
Volume key (Menu 9.2.4)
Use this menu to set whether the phone mutes the call
ringer or rejects a call if you press and hold [ / ]
when a call comes in.
77
Menu functions
Extra settings (Menu 9.2.5)
You can turn the automatic redialling or answering
feature on or off, and lock the external keys.
• Auto redial: set the phone to make up to ten
attempts to redial a phone number after an
unsuccessful call.
• Active flip: answer an incoming call by opening
the phone.
• Anykey answer: answer an incoming call by
pressing any key, except [ ] or .
• Cover keypad lock: lock the exposed keys to
keep accidental presses from affecting your
phone’s operation when the phone is closed.
•
•
•
•
Cover display: select an image to be displayed on
the external display.
Text position: select a text position. If you don’t
want to display text in Idle mode, select Off.
Text mode: select a font style.
Text colour: select a font colour.
Graphic logo: set the phone to display a graphic
icon instead of the service provider’s logo on the
idle screen. This is only available if a graphic icon
has been received in a message.
Main menu style (Menu 9.3.2)
You can select a display style for the main menu
screen.
Display settings (Menu 9.3)
Skin (Menu 9.3.3)
Use this menu to change settings for the display and
backlight.
You can select a skin colour pattern for Menu mode.
Wallpaper (Menu 9.3.1)
You can adjust the brightness of the display for
varying lighting conditions.
You can set up the idle screen on both displays.
• Main display: select an image or video clip to be
displayed on the main display.
78
•
Brightness (Menu 9.3.4)
Back light (Menu 9.3.5)
Sound settings (Menu 9.4)
You can select the length of time the backlight stays
on or the length of time the display stays on in Dim
mode, in which the backlight is off.
• Main display normal: select the length of time
the backlight stays on.
• Main display dim: select the length of time the
display stays on in Dim mode after the backlight
turns off. After a specified time, the display turns
off.
Use this menu to customise various sound settings.
Show caller information (Menu 9.3.7)
Use this menu to set the phone to display missed call
notifications with the most recently missed caller’s
information. To set the external display to show caller
information, select With cover display.
Use this menu to change the sound settings for
incoming calls.
• Ringtone: select a ringtone to be used for the call
ringer.
• Volume: select a ringtone volume.
• Alert type: specify how you are to be informed of
incoming calls.
Settings (Menu 9)
Use this menu to select a font colour for the numbers
entered while dialling.
Menu functions
Dialing display (Menu 9.3.6)
Incoming call (Menu 9.4.1)
Keypad tone (Menu 9.4.2)
Use this menu to select the tone that the phone
sounds when you press a key.
You can adjust the keypad tone volume using [ /
] in Idle mode.
Message tone (Menu 9.4.3)
Use this menu to change the sound settings for
incoming SMS messages, MMS messages, e-mails,
and CB messages individually.
79
Menu functions
•
•
•
Tone: select one of several message tones.
Alert type: specify how you are to be informed
when a message comes in.
Repetition: specify how often the phone informs
you of a new message.
Power on/off (Menu 9.4.4)
Use this menu to select the melody that the phone
sounds when it is switched on or off.
Flip tone (Menu 9.4.5)
Use this menu to select the tone that the phone
sounds when you open or close the phone.
Quiet mode (Menu 9.4.6)
Use this menu to set how the phone acts to alert you
to a specific event while in Quiet mode.
Extra tones (Menu 9.4.7)
Use this menu to customise additional tones for the
phone.
• Minute minder: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
80
•
•
•
Connection tone: set the phone to beep when it
connects to the system.
Alert on call: set the phone to beep when you
receive a new message or when the time for an
alarm comes during a call.
Indicative tone: set the phone to beep when you
have made a mistake or something wrong happens
on the phone.
Network services (Menu 9.5)
Use this menu to access network services. Please
contact your service provider to check their availability
and subscribe to them, if you wish.
Call diverting (Menu 9.5.1)
This network service reroutes incoming calls to a
phone number that you specify.
1. Select a call diverting option:
• Divert always: divert all calls.
• Busy: divert calls when you are on another
call.
• No reply: divert calls when you do not answer
the phone.
•
7.
Call barring (Menu 9.5.2)
This network service allows you to restrict your calls.
1. Select a call barring option:
• All outgoing calls: prohibit all outgoing calls.
• International: prohibit international calls.
Settings (Menu 9)
4.
5.
6.
International except home: only allow calls
to numbers within the current country when
you are abroad, and to your home country.
• All incoming calls: prohibit incoming calls.
• Incoming while abroad: prohibit incoming
calls when you use your phone outside of your
home country.
• Cancel all: cancel all call barring settings,
allowing calls to be sent and received normally.
• Change barring password: change the call
barring password obtained from your service
provider.
2. Select the type of calls to be barred.
3. Select Activate. To deactivate call barring, select
Deactivate.
4. Enter the call barring password supplied by your
service provider and press .
•
Menu functions
2.
3.
Unreachable: divert calls when you are not in
an area covered by your service provider or
when your phone is switched off.
• Cancel all: cancel all call diverting options.
Select the type of calls to be diverted.
Select Activate. To deactivate call diverting, select
Deactivate.
Move to the Divert to line.
Enter the number to which calls are to be diverted.
If you selected No reply, move to the Seconds
line and select the length of time the network
delays before diverting a call.
Press .
81
Menu functions
Call waiting (Menu 9.5.3)
Voice mail server (Menu 9.5.6)
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which call waiting option
will apply.
2. Select Activate and press . To
deactivate call waiting, select Deactivate.
Use this menu to store the number of the voicemail
server and access your voicemails.
Network selection (Menu 9.5.4)
This network service allows you to either automatically
or manually select the network to be used while
roaming outside of your home area. You can select a
network other than your home network only if there is
a valid roaming agreement between the two.
Caller ID (Menu 9.5.5)
This network service allows you to prevent your phone
number from being displayed on the phone of the
person being called. If you select Default, the phone
will use the default setting provided by the network.
Some networks may not allow you to change this
setting.
82
You must store the voicemail server number before
accessing the server. Your service provider can give
you the number.
•
•
Connect to voice server: connect to the
voicemail server to listen to your messages.
Voice server number: enter the voicemail server
number.
Closed user group (Menu 9.5.7)
Use this menu to set incoming and outgoing calls to be
restricted to a selected user group. For details about
how to create a closed user group (CUG), contact your
service provider.
• Index list: add, delete, or activate CUG index
numbers.
• Outside access: enable calls to numbers other
than those in the closed user group. This feature
depends on the nature of your CUG subscription.
•
Band selection (Menu 9.5.8)
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you may need to change to an
appropriate band.
Bluetooth (Menu 9.6)
Using the Bluetooth feature, you can connect the
phone wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or control
the phone remotely.
• If there are obstacles between the devices, the
operating distance may be reduced.
• It is recommended that you don’t use the
Bluetooth feature while using multimedia
features, such as voice recorder, camera, and
MP3 player, or vice versa, for better
performance.
• Some devices may not be compatible with your
phone.
Settings (Menu 9)
For the phone to make and receive phone calls, it
must register with an available network. Your phone
can handle any of the following types of networks:
GSM 1900 and Combined GSM 900/1800.
Bluetooth technology allows free wireless connections
between all Bluetooth-compliant devices within a
range of 10 meters. Since the devices communicate
using radio waves, they do not need to be in line of
sight to each other.
Menu functions
Default group: enable the default CUG, if you
have set one with your service provider. When
making a call, you are given the option of using
your default CUG, instead of selecting one from the
list.
Setting up the Bluetooth feature
The Bluetooth menu provides the following options:
• Activation: activate or deactivate the Bluetooth
feature.
• My devices: search for connectable Bluetooth
devices.
• My phone’s visibility: allow other Bluetooth
devices to search for your phone.
83
Menu functions
•
•
•
My phone’s name: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
Secure mode: determine if the phone asks for
your confirmation when other devices access your
data.
Bluetooth services: display available Bluetooth
services.
Searching for and pairing with a Bluetooth
device
1. From the Bluetooth setting options, select My
devices.
2. Select Search for new devices.
After searching, a list of devices to which you can
connect displays. The following icons indicate the
type of device:
84
•
Headset
•
Hands-free car kit
•
Computer
•
Printer
•
Mobile phone
•
PDA
•
Unknown device
The colour of the icon indicates the status of the
the device:
• Grey for unpaired devices
• Blue for paired devices
• Red for devices that are currently connected to
your phone
3. Select a device.
4. Enter a Bluetooth PIN code and press . This
code is used just once and you don’t need to
memorise it.
When the owner of the other device enters the
same code, pairing is complete.
Some devices, especially headsets or hands-free car
kits, may have a fixed Bluetooth PIN, such as 0000.
If the other device has a code, you must enter it.
Using device options
From the device list, press to access the
following options:
• Connect: connect to a headset or hands-free car
kit.
•
•
•
•
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item you want
to send is stored.
3. Scroll to the item you want and press .
4. Select Send via → Bluetooth.
The phone searches for devices within range and
displays a list of available devices.
Receiving data via Bluetooth
To receive data via Bluetooth, your phone’s Bluetooth
feature must be active.
1. If an unauthorised Bluetooth device sends data to
your phone, press to allow the device to
access your phone.
2. Press to receive data.
Settings (Menu 9)
•
5. Select a device.
6. If necessary, enter the Bluetooth PIN needed for
pairing and press .
Menu functions
•
Disconnect: end the connection with the
connected device.
Browse files: search for data from the device and
import data directly to your phone.
Service list: access the Bluetooth service list of
the device.
Rename: rename the paired device.
Authorise device/Unauthorised device:
determine whether or not the phone asks you to
permit connection when other devices try to
connect to your phone.
Delete: remove the selected device or all devices
from the list.
Security (Menu 9.7)
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
If you enter an incorrect PIN/PIN 2 three times in
succession, the SIM card is blocked. To unblock it
you need to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are supplied by your
service provider.
85
Menu functions
PIN check (Menu 9.7.1)
Privacy (Menu 9.7.5)
The 4- to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
Use this menu to lock access to messages, files, or all
menu functions on the phone, except for call
functions.
Change PIN code (Menu 9.7.2)
Use this menu to change your PIN. The PIN check
feature must be enabled to use this feature.
Phone lock (Menu 9.7.3)
Use this menu to lock the phone from unauthorised
use.
When this feature is enabled, you must enter a 4- to
8-digit phone password each time the phone is
switched on.
The password is preset to 00000000. To change the
password, use the Change password menu.
Change password (Menu 9.7.4)
Use this menu to change your phone password.
86
When a privacy option is enabled, you must enter the
phone password to access the locked items or
functions.
SIM lock (Menu 9.7.6)
The SIM lock feature allows your phone to work only
with the current SIM by assigning a SIM lock code. You
must enter the SIM lock code to use a different SIM
card.
Fixed dialling mode (Menu 9.7.7)
If supported by your SIM card, Fixed Dialling Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored in
the SIM card.
Change PIN2 code (Menu 9.7.8)
If supported by your SIM card, use this feature to
change your current PIN2.
•
•
•
•
Use this menu to create and customise the profiles
containing the settings for connecting your phone to
the network. You need these settings to use the web
browser or send MMS messages or e-mails.
•
Creating a profile
1. Press . If a profile has already been saved,
press and select Add new
connection.
2. Specify each information:
• Profile name: enter a profile name.
• Homepage URL: enter the address of the
homepage of your service provider.
•
•
•
Settings (Menu 9)
Your phone is suited for connecting to the network
by default. If you change the settings without first
checking with your service provider, the web
browser, MMS, and e-mail features may not work
properly.
Menu functions
Connection settings (Menu 9.8)
Proxy: activate or deactivate the proxy server.
IP address: enter the IP address of the proxy
server.
Port: enter the port number.
Linger time: set a time period after which the
network is disconnected if there has been no
new data traffic in that time.
DNS: activate or deactivate the DNS
addresses.
DNS 1 and DNS 2: enter the primary and
secondary DNS addresses.
Bearer: select the network bearer type.
Advanced settings: change the advanced
options. Depending on the bearer setting,
available options vary.
When the bearer is set to GPRS:
APN: enter the access point name.
Login ID: enter the login ID.
Password: enter the login password.
When the bearer is set to GSM:
Dial number: enter the PPP phone number.
87
Login ID: enter the login ID.
Password: enter the login password.
Data call type: select a call type for data
transmission.
3. Press to save the profile.
Using profile options
Press to access the following options:
• Edit: edit the selected profile.
• Delete: delete the profile.
• Add new connection: add a new profile.
Reset settings (Menu 9.9)
Use this menu to reset the phone’s settings you have
changed.
1. Press [ ] to check the setting categories to be
reset.
2. Press .
3. Press to confirm the reset.
4. Enter the phone password and press .
88
The password is preset to 00000000. You can
change this password.p. 86
Solve problems
Help and personal needs
To save the time and expense of an unnecessary service
call, perform the simple checks in this section before
contacting a service professional.
When you switch on your phone, the following
messages may appear:
“Insert SIM”
• Be sure that the SIM card is correctly installed.
“Enter password”
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
“Enter PIN”
• You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu.
“Enter PUK”
•
The PIN code has been entered incorrectly three
times in succession, and the phone is now blocked.
Enter the PUK supplied by your service provider.
You have entered a number but it was not dialled
• Be sure that you have pressed [
].
• Be sure you have accessed the right cellular
network.
• Be sure that you have not set an outgoing call
barring option.
Your correspondent cannot reach you
• Be sure that your phone is switched on. ([
pressed for more than one second.)
•
Be sure that you are accessing the correct cellular
network.
Be sure that you have not set an incoming call
barring option.
Solve problems
“No service,” “Network failure,” or “Not done”
displays
• The network connection has been lost. You may be
in a weak signal area. Move and try again.
• You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
•
Your correspondent cannot hear you speaking
• Be sure that you have switched on the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is located
at the bottom of the phone.
The phone starts beeping and “Low battery”
flashes on the display
• Your battery is insufficiently charged. Recharge the
battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display
). The number of bars indicates the signal
strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to a
window if you are in a building.
89
No number is dialled when you re-call a Contacts
entry
• Use the Contacts list menu to ensure the number
has been stored correctly.
• Re-store the number, if necessary.
The battery doesn’t charge properly or the phone
sometimes turns itself off
• Wipe the charging contacts both on the phone and
on the battery with a clean soft cloth.
If the above guidelines do not help you to solve
the problem, take note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
Health and safety information
Exposure to Radio Frequency (RF) Signals
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission (FCC) of the
U.S. Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on the
safety standards that were developed by independent
scientific organizations through periodic evaluation of
scientific studies.
The standards include a substantial safety margin
designed to assure the safety of all persons, regardless of
age and health.
The exposure standard for wireless phones employs a unit
of measurement known as Specific Absorption Rate (SAR).
The SAR limit recommended by the FCC is 1.6W/kg.*
SAR tests are conducted using standard operating
positions specified by the FCC with the phone transmitting
at its highest certified power level in all tested frequency
90
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the limit established by the government
adopted requirement for safe exposure. The tests are
performed in positions and locations (e.g., at the ear and
worn on the body) as required by the FCC for each model.
While there may be differences between the SAR levels of
various phones and at various positions, they all meet the
government requirement.
* In the U.S. and Canada, the SAR limit for mobile phones used
by the public is 1.6 watts/kg (W/kg) averaged over one gram
of tissue. The standard incorporates a substantial margin of
safety to give additional protection for the public and to
account for any variations in measurements.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of http:/
/www.fcc.gov/oet/fccid after searching on FCC ID printed
in the label on the phone.
For Body Operation
For body worn operation, this model phone has been
tested and meets the FCC RF exposure guidelines when
used with a Samsung-supplied or approved accessory
designated for this product or when used with an
accessory that contains no metal and that positions the
handset a minimum distance from the body.
The minimum distance for this model phone from the body
is written in the FCC certification information. None
compliance with the above conditions may violate FCC RF
exposure guidelines.
For more Information concerning exposure to radio
frequency signals, see the following websites:
Federal Communications Commission (FCC)
http://www.fcc.gov
91
Health and safety information
bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone
while operating can be well below the maximum value.
This is because the phone is designed to operate at
multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output
of the phone.
Health and safety information
Cellular Telecommunications Industry Association (CTIA):
http://www.wow-com.com
•
U.S.Food and Drug Administration (FDA)
http://www.fda.gov/cdrh/consumer
World Health Organization (WHO)
http://www.who.int/peh-emf/en
•
Precautions When Using Batteries
•
•
•
•
•
92
Never use any charger or battery that is damaged in
any way.
Use the battery only for its intended purpose.
If you use the phone near the network’s base station,
it uses less power; talk and standby time are greatly
affected by the signal strength on the cellular network
and the parameters set by the network operator.
Battery charging time depends on the remaining
battery charge, the type of battery and the charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out. When
the operation time (talk time and standby time) is
noticeably shorter than normal, it is time to buy a new
battery.
If left unused, a fully charged battery will discharge
itself over time.
•
•
Use only Samsung-approved batteries and recharge
your battery only with Samsung-approved chargers.
When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to a
charger for more than a week, since overcharging may
shorten its life.
Extreme temperatures will affect the charging capacity
of your battery: it may require cooling or warming
first.
Do not leave the battery in hot or cold places, such as
in a car in summer or winter conditions, as you will
reduce the capacity and lifetime of the battery. Always
try to keep the battery at room temperature. A phone
with a hot or cold battery may temporarily not work,
even when the battery is fully charged. Li-ion batteries
are particularly affected by temperatures below 0 °C
(32 °F).
Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object (coin, clip
or pen) causes a direct connection between the + and
– terminals of the battery (metal strips on the
battery), for example when you carry a spare battery
in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the shortcircuiting.
•
Dispose used batteries in accordance with local
regulations. Always recycle. Do not dispose batteries
in a fire.
•
•
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
•
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a car,
practice good common sense and remember the following
tips:
•
•
•
Get to know your wireless phone and its features, such
as speed dial and redial. If available, these features
help you to place your call without taking your
attention off the road.
When available, use a hands-free device. If possible,
add an extra layer of convenience and safety to your
wireless phone with one of the many hands-free
accessories available today.
Position your wireless phone within easy reach. Be
able to access your wireless phone without removing
your eyes from the road. If you get an incoming call at
an inconvenient time, let your voice mail answer it for
you.
•
•
•
Health and safety information
Road Safety
Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic
or hazardous weather conditions. Rain, sleet, snow, ice
and even heavy traffic can be hazardous.
Do not take notes or look up phone numbers while
driving. Jotting down a To Do list or flipping through
your phonebook takes your attention away from your
primary responsibility, driving safely.
Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be
stationary. If you need to make a call while moving,
dial only a few numbers, check the road and your
mirrors, then continue.
Do not engage in stressful or emotional conversations
that may be distracting. Make the people to whom you
are talking aware that you are driving and suspend
conversations that have the potential to divert your
attention from the road.
Use your wireless phone to call for help. Dial the
emergency number in the case of fire, traffic accident
or medical emergencies. Remember, it is a free call on
your wireless phone!
Use your wireless phone to help others in
emergencies. If you see a car accident, crime in
progress or other serious emergency where lives are 93
Health and safety information
•
in danger, call the emergency number, as you would
want others to do for you.
If you see a broken-down vehicle posing no serious
hazard, a broken traffic signal, a minor traffic accident
where no one appears injured, or a vehicle you know
to be stolen, call roadside assistance or any other
special non-emergency wireless number.
Operating Environment
Remember to follow any special regulations in force in any
area and always switch your phone off whenever it is
forbidden to use it, or when it may cause interference or
danger.
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users
are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is
recommended that the equipment should only be used in
the normal operating position (held to your ear with the
antenna pointing over your shoulder).
94
Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
Pacemakers
•
•
•
•
•
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be maintained
between a wireless phone and a pacemaker to avoid
potential interference with the pacemaker. These
recommendations are consistent with the independent
research and recommendations of Wireless Technology
Research.
Persons with pacemakers:
should always keep the phone more than 15 cm (6
inches) from their pacemaker when the phone is
switched on.
should not carry the phone in a breast pocket.
should use the ear opposite the pacemaker to
minimize potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Hearing Aids
Posted Facilities
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
Switch your phone off in any facility where posted notices
require you to do so.
Other Medical Devices
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its representative regarding your
vehicle. You should also consult the manufacturer of any
equipment that has been added to your vehicle. You
should also consult the manufacturer of any equipment
that has been added to your vehicle.
Health and safety information
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information. Switch your phone off in health care facilities
when any regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
Potentially Explosive Environments
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of the
need to observe restrictions on the use of radio equipment
in fuel depots (fuel storage and distribution areas),
chemical plants or where blasting operations are in
progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include the areas
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas (such as
propane or butane), areas where the air contains
chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
95
Health and safety information
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as userprogrammed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must
be switched on and in a service area with adequate signal
strength. Emergency calls may not be possible on all
wireless phone networks or when certain network services
and/or phone features are in use. Check with local service
providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 911 or other official emergency
number). Emergency numbers vary by location.
3. Press [
].
If certain features are in use (call barring, for example),
you may first need to deactivate those features before you
can make an emergency call. Consult this document and
your local cellular service provider.
96
When making an emergency call, remember to give all the
necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off
the call until given permission to do so.
Other Important Safety Information
•
•
•
•
Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as the
phone, its parts or accessories.
For vehicles equipped with an air bag, remember that
an air bag inflates with great force. Do not place
objects, including both installed or portable wireless
equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is
improperly installed and the air bag inflates, serious
injury could result.
•
•
•
•
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years:
•
•
•
•
Keep your phone and all its parts and accessories out
of the reach of small children and pets. They may
inadvertently damage these things or choke on small
parts.
Keep the phone dry. Precipitation, humidity and liquids
contain minerals that will corrode electronic circuits.
Do not use the phone with a wet hand. Doing so may
cause an electric shock to you or damage to the
phone.
Do not use or store the phone in dusty, dirty areas, as
its moving parts may be damaged.
•
•
•
•
•
Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
Do not store the phone in cold areas. When the phone
warms up to its normal operating temperature,
moisture can form inside the phone, which may
damage the phone’s electronic circuit boards.
Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with a
soft cloth slightly dampened in a mild soap-and-water
solution.
Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
Do not put the phone in or on heating devices, such as
a microwave oven, a stove or a radiator. The phone
may explode when overheated.
When the phone or battery gets wet, the label
indicating water damage inside the phone changes
colour. In this case, phone repairs are no longer
guaranteed by the manufacturer's warranty, even if
the warranty for your phone has not expired.
Health and safety information
Switch your phone off before boarding an aircraft. The
use of wireless phones in aircraft is illegal and may be
dangerous to the aircraft’s operation.
Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
97
Health and safety information
•
•
•
If your phone has a flash or light, do not use it too
close to the eyes of people or animals. This may cause
damage to their eyes.
Use only the supplied or an approved replacement
antenna. Unauthorized antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
If the phone, battery, charger or any accessory is not
working properly, take it to your nearest qualified
service facility. The personnel there will assist you, and
if necessary, arrange for service.
Information to User
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
FCC Compliance Information
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by
one or more of the following measures:
This device complies with Part 15 of FCC Rules. Operation
is subject to the following two conditions:
•
•
Acknowledging Special Precautions and
the FCC and Industry Canada Notice
Cautions
Modifications not expressly approved by the party
responsible for compliance could void the user's authority
to operate the equipment.
1. This device may not cause harmful interference, and
98
2. This device must accept any interference received.
• Including interference that may cause undesired
operation.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
•
•
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV
technician for help.
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on safety
standards that were developed by independent scientific
organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR limit set by the FCC is 1.6
Health and safety information
Appendix A: CERTIFICATION
INFORMATION (SAR)
W/kg. SAR Tests are conducted using standard operating
positions accepted by the FCC with the phone transmitting
at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone
while operating can be well below the maximum value.
This is because the phone is designed to operate at
multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power
output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the limit established by the government
adopted requirement for safe exposure. The tests are
performed in positions and locations(e.g., at the ear and
worn on the body) as required by the FCC for each model.
The highest SAR values of this model phone as reported to
FCC are Head: 1.01W/kg, Body-worn: 0.307W/kg in GSM
1900.
Body-worn operations are restricted to Samsung-supplied,
approved or none Samsung designated accessories that
have no metal and must provide at least 1.5cm separation
between the device, including its antenna whether
99
Health and safety information
extended or retracted, and the user’s body. None
compliance to the above restrictions may violate FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of http:/
/www.fcc.gov/oet/fccid after searching on FCC ID
A3LSGHX800.
In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kilogram (W/kg)
averaged over one gram of tissue. The standard incorporates a substantial ma gin of safety to give additional
protection for the public and to account for any variations
in measurements.
Appendix B: Guide to Safe and Responsible
Wireless Phone Use
Cellular Telecommunications & Internet Association
“Safety is the most important call you will ever make.”
100
A Guide to Safe and Responsible Wireless
Phone Use
TENS OF MILLIONS OF PEOPLE IN THE U.S. TODAY TAKE
ADVANTAGE OF THE UNIQUE COMBINATION OF
CONVENIENCE, SAFETY AND VALUE DELIVERED BY THE
WIRELESS TELEPHONE. QUITE SIMPLY, THE WIRELESS
PHONE GIVES PEOPLE THE POWERFUL ABILITY TO
COMMUNICATE BY VOICE-ALMOST ANYWHERE, ANYTIMEWITH THE BOSS, WITH A CLIENT, WITH THE KIDS, WITH
EMERGENCY PERSONNEL OR EVEN WITH THE POLICE.
EACH YEAR, AMERICANS MAKE BILLIONS OF CALLS FROM
THEIR WIRELESS PHONES, AND THE NUMBERS ARE
RAPIDLY GROWING.
But an important responsibility accompanies those
benefits, one that every wireless phone user must uphold.
When driving a car, driving is your first responsibility.
A wireless phone can be an invaluable tool, but good
judgment must be exercised at all times while driving a
motor vehicle whether on the phone or not.
The basic lessons are ones we all learned as teenagers.
Driving requires alertness, caution and courtesy. It
requires a heavy dose of basic common sense-keep your
But with wireless phone use, driving safely means a little
more. This brochure is a call to wireless phone users
everywhere to make safety their first priority when behind
the wheel of a car. Wireless telecommunications is keeping
us in touch, simplifying our lives, protecting us in
emergencies and providing opportunities to help others in
need. When it comes to the use of wireless phones, safety
is your most important call.
Wireless Phone “Safety Tips”
Below are safety tips to follow while driving and using a
wireless phone which should be easy to remember:
1. Get to know your wireless phone and its features such
as speed dial and redial. Carefully read your
instruction manual and learn to take advantage of
valuable features most phones offer, including
automatic redial and memory. Also, work to memorize
the phone keypad so you can use the speed dial
function without taking your attention off the road.
2. When available, use a hands free device. A number of
hands free wireless phone accessories are readily
available today. Whether you choose an installed
mounted device for your wireless phone or a speaker
phone accessory, take advantage of these devices if
available to you.
3. Position your wireless phone within easy reach. Make
sure you place your wireless phone within easy reach
and where you can grab it without removing your eyes
from the road. If you get an incoming call at an
inconvenient time, if possible, let your voice mail
answer it for you.
4. Suspend conversations during hazardous driving
conditions or situations. Let the person you are
speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather
conditions. Rain, sleet, snow and ice can be
hazardous, but so is heavy traffic. As a driver, your
first responsibility is to pay attention to the road.
5. Do not take notes or look up phone numbers while
driving. If you are reading an address book or
business card, or writing a “to do” list while driving a
car, you are not watching where you are going. It’s
common sense. Don’t get caught in a dangerous
situation because you are reading or writing and not
paying attention to the road or nearby vehicles.
Health and safety information
head up, keep your eyes on the road, check your mirrors
frequently and watch out for other drivers. It requires
obeying all traffic signs and signals and staying within the
speed limit. It means using seat belts and requiring other
passengers to do the same.
101
Health and safety information
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan your calls before you begin your trip
or attempt to coincide your calls with times you may
be stopped at a stop sign, red light or otherwise
stationary. But if you need to dial while driving, follow
this simple tip-dial only a few numbers, check the road
and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Stressful or emotional
conversations and driving do not mix-they are
distracting and even dangerous when you are behind
the wheel of a car. Make people you are talking with
aware you are driving and if necessary, suspend
conversations which have the potential to divert your
attention from the road.
8. Use your wireless phone to call for help. Your wireless
phone is one of the greatest tools you can own to
protect yourself and your family in dangerous
situations-with your phone at your side, help is only
three numbers away. Dial 9-1-1 or other local
emergency number in the case of fire, traffic accident,
road hazard or medical emergency. Remember, it is a
free call on your wireless phone!
102
9. Use your wireless phone to help others in
emergencies. Your wireless phone provides you a
perfect opportunity to be a “Good Samaritan” in your
community. If you see an auto accident, crime in
progress or other serious emergency where lives are
in danger, call 9-1-1 or other local emergency number,
as you would want others to do for you.
10. Call roadside assistance or a special wireless non
emergency assistance number when necessary.
Certain situations you encounter while driving may
require attention, but are not urgent enough to merit a
call for emergency services. But you still can use your
wireless phone to lend a hand. If you see a brokendown vehicle posing no serious hazard, a broken traffic
signal, a minor traffic accident where no one appears
injured or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
wireless number.
Careless, distracted individuals and people driving
irresponsibly represent a hazard to everyone on the road.
Since 1984, the Cellular Telecommunications Industry
Association and the wireless industry have conducted
educational outreach to inform wireless phone users of
their responsibilities as safe drivers and good citizens. As
we approach a new century, more and more of us will take
advantage of the benefits of wireless telephones. And, as
we take to the roads, we all have a responsibility to drive
safely.
Cellular Telecommunications & Internet Association For
more information, please call 1-888-901-SAFE.
For updates: http://www.wow-com.com/consumer/issues/
driving/articles.cfm?ID =85
Appendix C: Consumer Update on Wireless
Phones
U.S. Food and Drug Administration
1. What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called cell, mobile, or
PCS phones. These types of wireless phones can expose
the user to measurable radio frequency energy (RF)
because of the short distance between the phone and the
user s head. These RF exposures are limited by Federal
Communications Commission safety guidelines that were
developed with the advice of FDA and other federal health
and safety agencies. When the phone is located at greater
2. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any
health problems are associated with using wireless
phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of
radio frequency energy (RF) in the microwave range while
being used. They also emit very low levels of RF when in
the stand-by mode. Whereas high levels of RF can produce
health effects (by heating tissue), exposure to low level RF
that does not produce heating effects causes no known
adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some
studies have suggested that some biological effects may
occur, but such findings have not been confirmed by
additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
Health and safety information
“The wireless industry reminds you to use your phone
safely when driving.”
distances from the user, the exposure to RF is drastically
lower because a person’s RF exposure decreases rapidly
with increasing distance from the source. The so-called
“cordless phones,” which have a base unit connected to
the telephone wiring in a house, typically operate at far
lower power levels, and thus produce RF exposures well
within the FCC’s compliance limits.
103
Health and safety information
What is FDA’s role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiation
emitting consumer products such as wireless phones
before they can be sold, as it does with new drugs or
medical devices. However, the agency has authority to
take action if wireless phones are shown to emit radio
frequency energy (RF) at a level that is hazardous to the
user. In such a case, FDA could require the manufacturers
of wireless phones to notify users of the health hazard and
to repair, replace or recall the phones so that the hazard
no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
•
•
•
104
Support needed research into possible biological
effects of RF of the type emitted by wireless phones;
Design wireless phones in a way that minimizes any
RF exposure to the user that is not necessary for
device function; and
Cooperate in providing users of wireless phones with
the best possible information on possible effects of
wireless phone use on human health
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
•
•
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency Federal
Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information
Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless phones
with the Federal Communications Commission (FCC). All
phones that are sold in the United States must comply
with FCC safety guidelines that limit RF exposure. FCC
relies on FDA and other health agencies for safety
questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than
those they can get from wireless phones. Base stations
are thus not the primary subject of the safety questions
discussed in this document.
FDA is working with the U.S. National Toxicology Program
and with groups of investigators around the world to
ensure that high priority animal studies are conducted to
address important questions about the effects of exposure
to radio frequency energy (RF).
FDA has been a leading participant in the World Health
Organization International Electromagnetic Fields (EMF)
Project since its inception in 1996. An influential result of
this work has been the development of a detailed agenda
of research needs that has driven the establishment of
new research programs around the world. The Project has
also helped develop a series of public information
documents on EMF issues.
FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research
and Development Agreement (CRADA) to do research on
wireless phone safety. FDA provides the scientific
oversight, obtaining input from experts in government,
4. What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products—and at this point we
do not know that there is—it is probably very small. But if
you are concerned about avoiding even potential risks,
you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is a
key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone
will reduce RF exposure.
Health and safety information
3. What is FDA doing to find out more about the possible
health effects of wireless phone RF?
industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone users.
The CRADA will also include a broad assessment of
additional research needs in the context of the latest
research developments around the world.
If you must conduct extended conversations by wireless
phone every day, you could place more distance between
your body and the source of the RF, since the exposure
level drops off dramatically with distance. For example,
you could use a headset and carry the wireless phone
away from your body or use a wireless phone connected to
a remote antenna
105
Health and safety information
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like
those described above to reduce your RF exposure from
wireless phone use.
5. What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you
want to take steps to lower exposure to radio frequency
energy (RF), the measures described above would apply
to children and teenagers using wireless phones. Reducing
the time of wireless phone use and increasing the distance
between the user and the RF source will reduce RF
exposure.
Some groups sponsored by other national governments
have advised that children be discouraged from using
wireless phones at all. For example, the government in the
United Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly precautionary;
it was not based on scientific evidence that any health
hazard exists.
106
6. Do hands-free kits for wireless phones reduce risks
from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free kits
can be used with wireless phones for convenience and
comfort. These systems reduce the absorption of RF
energy in the head because the phone, which is the source
of the RF emissions, will not be placed against the head.
On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part
of the body will absorb more RF energy. Wireless phones
marketed in the U.S. are required to meet safety
requirements regardless of whether they are used against
the head or against the body. Either configuration should
result in compliance with the safety limit.
7. Do wireless phone accessories that claim to shield the
head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that accessories that claim to shield the head from
those emissions reduce risks. Some products that claim to
shield the user from RF absorption use special phone
cases, while others involve nothing more than a metallic
8. What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason, FDA
helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones.
This test method is now part of a standard sponsored by
the Association for the Advancement of Medical
instrumentation (AAMI). The final draft, a joint effort by
FDA, medical device manufacturers, and many other
groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers
and defibrillators are safe from wireless phone EMI.
FDA has tested hearing aids for interference from
handheld wireless phones and helped develop a voluntary
standard sponsored by the Institute of Electrical and
Electronic Engineers (IEEE). This standard specifies test
methods and performance requirements for hearing aids
and wireless phones so that no interference occurs when a
person uses a compatible phone and a compatible hearing
aid at the same time. This standard was approved by the
IEEE in 2000.
FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmful interference be found to occur, FDA will conduct
testing to assess the interference and work to resolve the
problem.
9. What are the results of the research done already?
Health and safety information
accessory attached to the phone. Studies have shown that
these products generally do not work as advertised. Unlike
“hand-free” kits, these so-called “shields” may interfere
with proper operation of the phone. The phone may be
forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal
trade Commission (FTC) charged two companies that sold
devices that claimed to protect wireless phone users from
radiation with making false and unsubstantiated claims.
According to FTC, these defendants lacked a reasonable
basis to substantiate their claim.
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in their
research methods. Animal experiments investigating the
effects of radio frequency energy (RF) exposures
characteristic of wireless phones have yielded conflicting
results that often cannot be repeated in other laboratories.
A few animal studies, however, have suggested that low
levels of RF could accelerate the development of cancer in
laboratory animals. However, many of the studies that
showed increased tumor development used animals that 107
Health and safety information
had been genetically engineered or treated with cancer
causing chemicals so as to be pre-disposed to develop
cancer in the absence of RF exposure. Other studies
exposed the animals to RF for up to 22 hours per day.
These conditions are not similar to the conditions under
which people use wireless phones, so we don t know with
certainty what the results of such studies mean for human
health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use of
wireless phones and primary brain cancer, gioma,
meningioma, or acoustic neuroma, tumors of the brain or
salivary gland, leukemia, or other cancers. None of the
studies demonstrated the existence of any harmful health
effects from wireless phone RF exposures. However, none
of the studies can answer questions about long-term
exposures, since the average period of phone use in these
studies was around three years.
10. What research is needed to decide whether RF
exposure from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological
studies of people actually using wireless phones would
provide some of the data that are needed. Lifetime animal
108
exposure studies could be completed in a few years.
However, very large numbers of animals would be needed
to provide reliable proof of a cancer promoting effect if
one exists. Epidemiological studies can provide data that
is directly applicable to human populations, but 10 or
more years follow-up may be needed to provide answers
about some health effects, such as cancer. This is because
the interval between the time of exposure to a cancercausing agent and the time tumors develop - if they do may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in
measuring actual RF exposure during day-to-day use of
wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which
model of phone is used.
11. Which other federal agencies have responsibilities
related to potential RF health effects?
Additional information on the safety of RF exposures from
various sources can be obtained from the following
organizations.
FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
National Institute for Occupational Safety and Health
(NIOSH):
http://www.cdc.gov/niosh/emfpg.html
World health Organization (WHO):
http://www.who.int/peh-emf/
International Commission on Non-Ionizing Radiation
Protection:
http://www.icnirp.de
National Radiation Protection Board (UK):
http://www.nrpb.org.uk
Health and safety information
Occupational Safety and Health Administration’s (OSHA):
http://www.osha-slc.gov/SLTC/radiofrequencyradiation/
index.html
Updated 4/3/2002: US Food and Drug Administration
http://www.fda.gov/cellphones
109
Health and safety information
110
Index
AB mode, text input • 24
Active flip • 78
Alarm • 43
Answering
call • 27
second call • 28
Anykey answer • 78
Auto redial • 78
Background image • 78
Backlight time, set • 79
Band selection • 83
Barring, calls • 81
Battery
charging • 7
low indicator • 8
Bluetooth
receiving, data • 85
sending, data • 85
settings • 83
Broadcast messages • 53, 61
Browser, web • 45
Calculator • 44
Calendar • 67
Call cost • 32
Call log
dialled • 31
missed • 31
received • 31
Call time • 31
Caller groups • 34
Caller ID • 82
Calls
answering • 27
barring • 81
diverting • 80
holding • 28
redialling • 26
rejecting • 27
transferring • 29
waiting • 82
Camera
photos • 71
videos • 74
CB (Cell Broadcast) messages •
53, 61
Characters, enter • 24
Configuration messages • 51
Connection tone • 80
Converter • 44
Creating messages
e-mail • 50
MMS • 49
SMS • 49
CUG (Closed User Group) • 82
Deleting
call log • 30
e-mail • 54, 55, 56
events • 70
MMS • 52, 54, 56
phonebook • 33, 36
SMS • 52, 54, 56
Dialing font, set • 79
Dialled calls • 31
Display
backlight, set • 79
brightness • 78
icons • 10
language • 77
layout • 10
settings • 78
Diverting, calls • 80
Document files • 65
DRM (Digital Rights
Management) • 62
DTMF tones, send • 29
E-mails
creating/sending • 50
deleting • 55
setting • 59
viewing • 54
FDN (Fixed Dialling Number)
mode • 86
File manager • 62
File viewer • 65
Flip tone • 80
Games • 42
Greeting message • 77
Health and safety • 90
Holding, call • 28
Icons, description • 10
111
Index
Image editor • 40
Images, downloaded • 62
Inbox, messages
e-mail • 54
MMS/SMS • 51
International calls • 26
Internet • 45
Java applications • 42
Keypad lock • 78
Keypad tones
selecting • 79
sending/muting • 29
volume • 79
Language, select • 77
Last number, redial • 26
Locking
cover keypad • 78
menu functions • 86
phone • 86
SIM card • 86
Low battery indicator • 8
112
Memory card
accessing files • 67
installing • 22
Memory status
downloaded items • 67
file manager • 67
messages • 62
phonebook 36
Menu style • 78
Message tone • 79
Messages
cell broadcast • 53, 61
configuration • 53
e-mail • 50, 54
greeting • 77
MMS • 49, 52
push • 53, 61
SMS • 48, 52
Minute minder • 80
Missed calls • 31
MMS messages
creating/sending • 49
deleting • 52
setting • 58
viewing • 51
MP3 player • 36
Multiparty-call • 30
Music, downloaded • 64
Name card • 35
Names
entering • 24
searching • 32
Network band, select • 83
Network selection • 82
Network services • 80
Outbox, messages • 53
Password
call barring • 81
phone • 86
Phone
display • 10
icons • 10
locking • 86
password • 86
resetting • 88
switching on/off • 8
unpacking • 6
Phonebook
adding • 33
deleting • 33, 36
finding • 32
managing • 36
options • 32
speed-dialling • 34
Photos
editing • 40
taking • 70
viewing • 62
PIN, change • 86
PIN2, change • 87
Power on/off tone • 80
Privacy • 86
Problems, solve • 88
Push messages • 53, 61
Quiet mode
entering • 13
setting • 80
Received calls • 31
Received messages
e-mail • 54
MMS/SMS • 51
Recording
videos • 74
voice memos • 39
Redialling
S
Safety
information • 90
precautions • 1
Security, calls • 85
Sent box, messages • 54
Short cut • 77
SIM card
inserting • 7
locking • 86
Skin colour • 78
SMS messages
creating/sending • 48
deleting • 52
setting • 57
viewing • 51
Sound settings • 79
Sounds, downloaded • 65
Speakerphone • 29
Speed-dial • 34
Stopwatch • 45
Switching on/off
microphone • 29
phone • 8
Templates, message • 56
Text, enter • 24
Timer • 44
Index
automatically • 78
manually • 26
Resetting phone • 88
Ringer
incoming calls • 79
messages • 80
Roaming • 82
Videos
playing • 63
recording • 74
Voice recorder
playing • 39
recording • 39
Voicemail server • 82
Waiting call • 82
Wallpaper • 78
Web browser
access • 45
bookmarks • 47
World time • 42
113
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.4
Linearized : No
Modify Date : 2005:07:20 16:57:17-03:00
Create Date : 2005:07:20 16:57:02-03:00
Title : Microsoft Word - HW_SW Descripsion_SGH-x800.doc
Author : kim
Creator : PScript5.dll Version 5.2
Producer : Acrobat Distiller 6.0.1 (Windows)
Page Count : 115
Mod Date : 2005:07:20 16:57:17-03:00
Creation Date : 2005:07:20 16:57:02-03:00
Metadata Date : 2005:07:20 16:57:17-03:00
EXIF Metadata provided by EXIF.tools