Samsung Electronics Co SGHZ540 Single-Band PCS GSM Phone with Bluetooth User Manual S3 folder UMTS Block Diagram

Samsung Electronics Co Ltd Single-Band PCS GSM Phone with Bluetooth S3 folder UMTS Block Diagram

UserManual.wiki >

Samsung Electronics Co >

SGHZ540 User Manual

Users Manual

* Depending on the software installed or your service provider or country, some of the descriptions in this guide may not match your phone exactly.* Depending on your country, your phone and accessories may appear different from the illustrations in this guide.World Wide Webhttp://www.samsungmobile.comPrinted in KoreaCode No.:GH68-XXXXXAEnglish. 11/2005. Rev. 1.0

SGH-Z540User’s GuideDraft 2005. 11. 11(Version:Z540XAEK1)

ImportantsafetyprecautionsFailure to comply with the following precautions may be dangerous or illegal.Use road safety at all timesDo not use a hand-held phone while driving. Park the vehicle first. Switch off the phone when refuellingDo not use the phone at a refuelling point (service station) or near fuels or chemicals.Switch off in an aircraftWireless phones can cause interference. Using them in an aircraft is both illegal and dangerous.Switch off the phone near all medical equipmentHospitals or health care facilities may be using equipment that could be sensitive to external radio frequency energy. Follow any regulations or rules in force.InterferenceAll wireless phones may be subject to interference, which could affect their performance.

1Important safety precautionsBe aware of special regulationsMeet any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger.Water resistanceYour phone is not water-resistant. Keep it dry. Sensible useUse only in the normal position (held to the ear). Avoid unnecessary contact with the antenna when the phone is switched on.Emergency callsKey in the emergency number for your present location, then press . Keep your phone away from small children Keep the phone and all its parts, including accessories, out of the reach of small children.Accessories and batteriesUse only Samsung-approved accessories and batteries. Use of any unauthorised accessories could damage your phone and may be dangerous.Qualified serviceOnly qualified service personnel may repair your phone.For more detailed safety information, see "Health and safety information" on page 74.• The phone could explode if the battery is replaced with an incorrect type.• Dispose of used batteries according to the manufacturer’s instructions.

2About this GuideThis User’s Guide provides you with condensed information about how to use your phone. To quickly learn the basics for your phone, please refer to “Get started” and “Step outside the phone.”In this guide, the following instruction icons appear:Indicates that you need to pay careful attention to the subsequent information regarding safety or phone features.Indicates that you can get more information on the referenced page. →Indicates that you need to press the Navigation keys to scroll to the specified option and then select it.[ ] Indicates a key on the phone. For example, []< > Indicates a soft key, whose function is displayed on the phone screen. For example, <Msg.>•3GYour phone is capable of operating in a 3G environment, allowing much greater data transfer speed, video streaming, and video conferencing. Special features of your phone• Camera and camcorderUse the camera module on your phone to take a photo or record a video.•Media playerPlay media files on your phone.• Multimedia message service (MMS)Deliver MMS messages with a combination of text, images, and audio.

4ContentsUnpack 6Make sure you have each itemYour phone 6Buttons, features, and locationsGet started 7First steps to operating your phoneInstall and charge the phone.............................. 7Power on or off ................................................ 8Keys and display .............................................. 9Access menu functions.................................... 11Customise your phone..................................... 12Make/Answer calls.......................................... 14Step outside the phone 14Begin with your camera, games, the web, and other special featuresUse camera ................................................... 14Play media files.............................................. 15Browse the web.............................................. 16Use Contacts ................................................. 16Send messages ............................................. 17View messages.............................................. 19Use Bluetooth wireless.................................... 20Enter text 21ABC, T9, Number, and Symbol modeCall functions 23Advanced calling featuresMenu functions 26All menu options listedSolve problems 73Help and personal needsHealth and safety information 74Index 80

51 Call logp. 261 Missed calls2 Dialled calls3 Received calls4 Current contacts5 Delete all6 Data calls7 Calls cost*8 Calls timep. 26p. 27p. 27p. 27p. 27p. 27p. 27p. 282 Contactsp. 281 Search contact2 New contact3 Groups4 Speed dial5 My name card6 Copy all7 Own number8 Service number*9 Settings0 Memory statusp. 28p. 29p. 30p. 30p. 31p. 31p. 31p. 31p. 31p. 313 Applicationsp. 321 SAT*2 Media player3 Voice memo4 World clock5 Calculator6 Converterp. 32p. 32p. 34p. 35p. 35p. 364 Internetp. 361 Go to homepage2 Enter URL3 Favorites4 History5 Browser settings6 Network settingsp. 36p. 37p. 37p. 38p. 38p. 385 Messagesp. 381 Create new2 Inbox3 Drafts4 Outbox5 Sent box6 Email inbox7 Media Album**8 Templates9 Broadcast0 Delete all* Settings# Memory statusp. 38p. 41p. 43p. 43p. 43p. 43p. 44p. 44p. 45p. 46p. 46p. 496 File managerp. 50ImagesVideosMusicSoundsGames & MoreOther filesp. 50p. 51p. 52p. 53p. 54p. 547 Organiserp. 551 Alarm2 Calendar3 Week view4 Today’s events5 Schedule6 Anniversary7 Task8 Memo9 Missed event alarm0 Memory statusp. 55p. 55p. 57p. 57p. 58p. 58p. 58p. 58p. 58p. 588 Camerap. 599 Settingsp. 631 Profiles2 Time & date3 Phone4 Display5 Call6 Connectivity7 Application settings8 Security9 Memory status0 Reset settingsp. 63p. 64p. 64p. 65p. 66p. 67p. 71p. 71p. 72p. 72* Shows only if supported by your USIM/SIM card.** Shows only if supported by your service provider.Overview of menu functionsTo access Menu mode, press [Centre] in Idle mode.

6UnpackMake sure you have each itemYou can obtain various accessories from your local Samsung dealer.Phone Travel AdapterBattery PC Data CablePC Link CD User’s GuideThe items supplied with your phone and the accessories at your Samsung dealer may vary, depending on your country or service provider.Your phoneButtons, features, and locationsExternal speakerMicrophoneDelete keyExterior camera lensCamera keyExternal displayMusic player control keysHeadset jackEarpieceDisplayVideo call keyPower On/Off/Menu exit keyRight soft keyInterior camera lensNavigationkeysDial keySpecialfunction keysVolume keysLeft soft keyApplicationswitch keyMenu access/confirm key(Centre)Alphanumerickeys

7Get startedFirst steps to operating your phoneUSIM/SIM card informationWhen you subscribe to a cellular network, you receive a plug-in SIM (Subscriber Identity Module) card loaded with your subscription details, such as your PIN, and available optional services. For 3G services, you can purchase a USIM (Universal Subscriber Identity Module) card.Install and charge the phone Remove the battery cover.If the phone is already on, first turn it off by holding [ ]. Insert the USIM/SIM card.Make sure that the gold-coloured contacts on the card face down into the phone. Install the battery. Replace the battery cover. Plug the travel adapter into the phone. Plug the adapter into a standard AC wall outlet. When the phone is completely charged (the battery icon becomes still), unplug the adapter from the power outlet.

Get started8Low battery indicatorWhen the battery is low:• a warning tone sounds,• the battery low message displays, and• the empty battery icon blinks.If the battery level becomes too low, the phone automatically turns off. Recharge your battery. Power on or off Remove the adapter from the phone.Power onDo not turn on the phone when mobile phone use is prohibited.1. Open the phone.2. Press and hold [ ] to turn on the phone.3. If necessary, enter the PIN and press <Confirm>.Power off1. Open the phone.2. Press and hold [ ].

Get started10DisplayLayoutThe display has three areas.Icons*Received signal strengthAccessing services in a 2.5G network; when transferring data, this icon animates.Accessing services in a 3G network; when transferring data, this icon animates.Roaming networkVoice call in progressOut of your service area; you cannot send or receive voice callsVideo call in progressText and graphicsdisplays messages, instructions, and information you enter.Soft key function indicatorsshows the current functions assigned to the two soft keys.Iconsdisplays various icons.Msg. ContactsOut of your service area; you cannot send or receive video callsBluetooth active; When transferring data, this icon blinks red and blue.p. 68Connected to a Bluetooth headset or hands-free kitConnected with a computer via a USB portBrowsing the Internet on a PC using the phone as a modemConnected to a secured web pageNew message:•: SMS• : MMS•: E-mail•: Voicemail•: WAP push• : Configuration message

11Get started Access menu functionsInbox full:•: SMS• : MMS •: E-mail•: Voicemail•: WAP push• : Configuration messageProfile setting•: Normal• : Meeting•: Car•: Silent• : OutdoorBattery power level* Depending on your country or service provider, the icons shown on the display may vary.Use the soft keysThe roles of the soft keys vary depending on the function you are using. The bottom line of the display indicates their current role.Press the left soft key to select the highlighted option.Press the right soft key to return to the previous menu level.Select Back

14Make/Answer callsStep outside the phoneBegin with your camera, games, the web, and other special featuresUse cameraTo make a voice call:1. Enter an area code and phone number.2. Press [ ].3. To end the call, press [ ].To make a video call:1. Enter an area code and phone number.2. Press [ ] and if their phone is compatible, the other person appears on the screen.1. When the phone is ringing, press [ ].2. For a video call, press <Show me> to allow the other person to see you.3. To end the call, press [ ].Press [Volume].Make a callAnswer a callAdjust the volume during a call1. In Idle mode, press and hold [ ] to turn on the camera.2. Press [ ] to switch between the interior lens and exterior lens.3. Aim the lens at the subject and make any desired adjustments.4. Press [Centre] to take a photo. The photo is saved automatically.5. Press [Centre] to take another photo.1. In Idle mode, press [Centre] and select File manager → Images.2. Select the photo you want.Take a photoView a photo

15Step outside the phone Play media files1. In Idle mode, press and hold [ ] to turn on the camera.2. Press [1] to switch to Record mode.3. Press [ ] to switch between the interior lens and exterior lens.4. Press [Centre] to start recording.5. Press [Centre] to stop recording. The video is automatically saved.6. Press [Centre] to record another video.1. In Idle mode, press [Centre] and select File manager → Videos.2. Select the video you want.Record a videoPlay a videoUse these methods:• Download from the wireless webp. 36• Download from a computer using the optional Samsung PC StudioSamsung PC Studio User’s Guide• Receive via Bluetooth p. 67.1. In Idle mode, press [Centre] and select Applications → Media player.2. Press <Options> and select Open play list.3. Press <Options> and select Add → Folder or Files.4. Check the files you want or scroll to the folder you want.5. Press <Add> or <Select>.Copy media files to the phoneCreate a play list

Step outside the phone16Browse the webUsing a built-in web browser, you can get easy access to the wireless web to get a variety of up-to-date services and information and to enjoy downloads of web content.Use Contacts1. From the Media player screen, press [Centre].2. Select the file you want.3. During playback, use the following keys:• Centre: Pauses or resumes playback.• Up: Opens the play list.•Left: Moves to the previous file. Moves backward in a file when held down.• Right: Skips to the next file. Skips forward in a file when held down.• Volume: Adjusts the volume.• Down: Stops playback.In Idle mode, press [Centre] and select Internet → Go to homepage.Play media filesLaunch the browser• To scroll through browser items, press [Up] or [Down].• To select an item, press [Centre] or <Select>.• To return to the previous page, press <Back> or [C].• To use browser options, press <Options>.To the phone’s memory:1. In Idle mode, enter a phone number.2. Press <Options> and select Save to Contacts → Phone → New → a number type.3. Specify the contact information: First name, Last name, Phone Number, Work Email, Home Email, Group, Homepage, Birthday, and More information (Job title, Department, Company, Nickname, and Notes).4. Press <Options> and select Save to save the entry.Navigate the webAdd an entry

17Step outside the phone Send messagesTo the USIM/SIM card:1. In Idle mode, enter a phone number.2. Press <Options> and select Save to Contacts → SIM → New.3. Specify the contact information: Name, Phone number, Group (for USIM), and Location number.4. Press <Save> to save the entry.1. In Idle mode, press <Contacts>.2. Enter the first few letters of the name you want.3. Select an entry.4. Select a number and press [ ] to dial, or [Centre] to edit contact information.Find an entry1. In Idle mode, press [Centre] and select Contacts → My name card.2. Specify your contact information.3. Press <Options> and select Save to save the name card.4. To send the name card, access the My name card menu again. 5. Press <Options> and select Send name card →a sending method.1. In Idle mode, press <Msg.> and select Create new → Text message.2. Enter the message text.3. Press [Centre].4. Enter destination numbers.5. Press [Centre] to send the message.Create and send your name cardSend a text message (SMS)

Step outside the phone181. In Idle mode, press <Msg.> and select Create new → Multimedia message.2. Enter the message subject.3. Select Text.4. Enter the message text and press [Centre].5. Select Picture or Video or Audio.6. Add an image, video clip, or sound clip.7. Press <Options> and select Send.8. Enter destination numbers or e-mail addresses.9. Press [Centre] to send the message.Send a multimedia message (MMS)1. In Idle mode, press <Msg.> and select Create new → File messenger.2. Enter the message subject.3. Move to the Message field.4. Enter the message text.5. Move to the Attach files line.6. Press <Options> and select Add files, Add name card, or Add v-calendar.7. Select images, videos, sounds, name cards, schedule items, or tasks.8. Press <Options> and select Attach.9. Press [Centre].10.Enter destination numbers or e-mail addresses.11.Press [Centre] to send the message.Send files by MMS

19Step outside the phone View messages1. In Idle mode, press <Msg.> and select Create new → Email.2. Enter the e-mail subject.3. Move to the Message field.4. Enter the e-mail text.5. Move to the Attach files line.6. Press <Options> and select Add files, Add name card, or Add v-calendar.7. Select images, videos, sounds, name cards, schedule items, or tasks.8. Press <Options> and select Attach.9. Press [Centre].10.Enter e-mail addresses.11.Press [Centre] to send the e-mail.Send an e-mailWhen a notification appears:1. Press <View>.2. Select a message from the Inbox.From the Inbox:1. In Idle mode, press <Msg.> and select Inbox.2. Select a text message ( ).When a notification appears:1. Press <View>.2. Select a message from the Inbox.From the Inbox:1. In Idle mode, press <Msg.> and select Inbox.2. Select an MMS message ().View a text messageView a multimedia message

Step outside the phone20Use Bluetooth wirelessYour phone is equipped with Bluetooth technology, enabling you to connect the phone wirelessly to other Bluetooth devices and exchange data with them, talk hands-free, or control the phone remotely.1. In Idle mode, press <Msg.> and select Email inbox.2. Press <Options> and select Download to download new e-mails or headers.3. Select an e-mail or header.4. If you selected a header, press <Options> and select Retrieve to view the body of the e-mail.In Idle mode, press [Centre] and select Settings → Connectivity → Bluetooth → Activation → On.1. In Idle mode, press [Centre] and select Settings → Connectivity → Bluetooth → My devices → Search new device.View an e-mailTurn on BluetoothSearch for and pair with a Bluetooth device2. Select a device.3. Enter a Bluetooth PIN or the other device’s Bluetooth PIN, if it has, and press <OK>.When the owner of the other device enters the same code, the pairing is complete.1. Access an application, Contacts, File manager, or Organiser.2. Select the item you want to send.3. Press <Options> and select Send name card/Send schedule/Send task/Send → Via bluetooth. 4. Select a device.5. If necessary, enter the Bluetooth PIN and press <OK>.To receive data via Bluetooth, your phone’s Bluetooth feature must be active.If necessary, press <Yes> to confirm that you are willing to receive.Send dataReceive data

21Enter textABC, T9, Number, and Symbol modeYou can enter text in some features such as Messages, Contacts, or Organiser, using ABC mode, T9 mode, Number mode, and Symbol mode.Changing the text input modeThe text input mode indicator displays when the cursor is in a text input field.• Press and hold [ ] to switch between T9 ( ) and ABC ( ) modes.• Press [ ] to change case or to switch to Number mode ( ).• Press and hold [ ] to switch to Symbol mode ().Using T9 modeT9 is a predictive text input mode that allows you to key in any character using single keystrokes.Entering a word in T9 mode1. Press [2] to [9] to start entering a word. Press each key once for each letter. For example, press [4], [3], [5], [5], and [6] to enter Hello in T9 mode. T9 predicts the word that you are typing, and it may change with each key that you press.2. Enter the whole word before editing or deleting characters.3. When the word displays correctly, go to step 4. Otherwise, press [0] to display alternative word choices for the keys that you have pressed. For example, Of and Me use [6] and [3].4. Press [ ] to insert a space and enter the next word.Other T9 mode operations• Press [1] to enter periods or apostrophes automatically.• Press the Navigation keys to move the cursor. • Press [C] to delete characters one by one. Press and hold [C] to clear the entire display.Adding a new word to the T9 dictionaryThis feature may not be available for some languages.1. Enter the word that you want to add.2. Press [0] to display alternative words for your key presses. When there are no more alternative words, Spell displays on the bottom line. 3. Press <Spell>.4. Enter the word you want using ABC mode and press <Add>.

Enter text22Using ABC modePress the appropriate key until the character you want appears on the screen.(creating an SMS message with GSM alphabet encoding)Other ABC mode operations• To enter the same letter twice or to enter a different letter on the same key, wait for the cursor to move to the right automatically or press [Right]. Then, enter the next letter.• Press [ ] to insert a space.• Press the Navigation keys to move the cursor. •Press [C] to delete characters one by one. Press and hold [C] to clear the entire display.Using Number modeNumber mode enables you to enter numbers. Press the keys corresponding to the digits you want.Using Symbol modeSymbol mode enables you to insert symbols.Upper case Lower caseKey Characters in order displayedTo Pressdisplay more symbols [Up] or [Down]. select a symbol the corresponding number key.clear the symbol(s) [C]. insert the symbol(s) <OK>.

23Call functionsAdvanced calling featuresMaking a call1. In Idle mode, enter the area code and phone number.2. Press [ ].Making an international call1. In Idle mode, press and hold [0]. The + character appears.2. Enter the country code, area code, and phone number, then press [ ].Redialling recent numbers1. In Idle mode, press [ ] to display the list of recent numbers.2. Scroll to the number you want and press [ ].Making a call from ContactsOnce you have stored a number in Contacts, you can dial the number by selecting it from Contacts.p. 28You can also use the speed dial feature to assign your most frequently called numbers to specific number keys.p. 30You can quickly dial a number from the USIM/SIM card using its location number assigned when stored.1. In Idle mode, enter the location number for the phone number you want and press [ ].2. Scroll through other numbers, if necessary.3. Press <Call> or [ ] to make a voice call, or <V-Call> to make a video call.Ending a callPress [ ] or close the phone.Answering a callWhen you receive an incoming call, the phone rings and displays the incoming call image. Press [ ] or <Accept> to answer the call.Tips for answering a call• When Anykey answer is active, you can press any key to answer a call, except for [ ] and <Reject>.p. 64• When Active folder is active, you can answer a call by opening the phone.p. 64• Press <Reject> or [ ] to reject a call.• Press and hold [Volume] to reject a call or mute the ringer, depending on the Side key setting.p. 65• Press [C] to clear the last digit or press and hold [C] to clear the whole display. You can move the cursor to edit an incorrect digit.• Press and hold [ ] to enter a pause between numbers.

Call functions24Viewing missed callsIf you have missed calls, the screen displays how many calls you have missed.1. Press <View>.2. If necessary, scroll through the missed calls.3. Press [ ] to dial the number you want.Using the headsetUse the headset to make or answer calls without holding the phone. Connect the headset to the jack on the right side of the phone. The button on the headset works as follows:Options during a callYou can access a number of functions during a call.Adjusting the volume during a callUse [Volume] to adjust the earpiece volume during a call.Press [Volume up] to increase the volume level and [Volume down] to decrease the volume level.Placing a call on hold/RetrievingPress <Hold> or <Unhold> to place the call on hold or retrieve the call.Making a second callYou can make another call if your network supports it.1. Press <Hold> to put the call on hold.2. Make the second call in the normal way.3. Press <Swap> to switch between the calls.4. Press <Options> and select Drop → Drop held call to end the call on hold.5. To end the current call, press [ ].Answering a second callYou can answer an incoming call while already on the phone, if your network supports it and you have activated the call waiting feature.p. 67 1. Press [ ] to answer the call. The first call is automatically put on hold.2. Press <Swap> to switch between the calls.3. Press <Options> and select Drop → Drop held call to end the call on hold.4. To end the current call, press [ ].To Pressredial the last call the button twice.answer a call the button.end a call the button.

25Call functions Using In-call optionsPress <Options> to access the following options during a call:•Loundspeaker: turn on the Speakerphone feature or switch back to Normal mode.•Switch to headset/Switch to phone: switch the call to a Bluetooth headset or hands-free car kit or back to the phone.•Join: set up a multi-party call by adding a caller on hold to a currently active call. You can include up to 5 people on a multi-party call.•Split: have a private conversation with one multi-party call participant. The other participants can converse with each other. After the private conversation, select Join to return both all private participants to the multi-party call.•Drop call: disconnect the call currently on hold, active call, or all calls.•Transfer: transfer the currently active call to a caller on hold. The two callers can talk to each other, but you are disconnected from the call.•Mute/Unmute: switch off the phone's microphone so that the other person on the phone cannot hear you, or switch it back on.•Mute key tone/Unmute key tone: turn the key tones off or on.•Contacts: locate or store contacts in Contacts.•Send text message: create a new SMS message.•Send DTMF: send DTMF (Dual tone multi-frequency) tones as a group. The DTMF tones are the tones used in phones for tone dialling, sounding when you press the number keys. This option is helpful for entering a password or an account number when you call an automated system, like a banking service.•Memo: create a memo.Using the video call featureIn a 3G (UMTS) service area, your phone can make or receive a video call, allowing you to see another person on the screen during a conversation. The other person’s phone must support the video call feature.Making a video call1. In Idle mode, enter the area code and phone number.2. Press [ ].Answering a video callWhen you receive a video call, answer as you would when as receiving a voice call. Press <Show me> to allow the caller to see you.To communicate with answering machines or computerised telephone systems, Unmute key tone must be selected.

26Using video call optionsDuring a video call, press <Options> to access the following options:•Loudspeaker/Loudspeaker off: turn the speaker on or off.•Switch to headset/Switch to phone: switch the call to a Bluetooth headset or back to the phone.•Mute camera: turn off the camera.•Mute voice: turn off the microphone.•Mute camera & voice: turn off the camera and the microphone.•Mute key tone: turn off the key tones.•Zoom: display the zoom control bar and zoom in or out by pressing [Up] or [Down].•Brightness: display the brightness control bar and adjust the brightness by pressing [Left] or [Right].•Effects: change the colour tone of the image.•Hide information/Show information: hide or display information about the video call.•Send DTMF: send Dual tone multi-frequency (DTMF) tones as a group after entering the entire number you need to send or retrieving a number from Contacts.•Video quality: change the image quality of the camera.•End call: end the video call.Menu functionsAll menu options listedCall log (Menu 1)Use this menu to view the calls you have dialled, received, or missed, and the length of the calls. You can also check the cost of your calls, if your USIM/SIM card supports this function.To access this menu, press [Centre] in Idle mode and select Call log.Missed calls (Menu 1.1)This menu displays the most recent calls that you did not answer.Accessing a call record1. Press [Up] or [Down] to scroll through the call list.2. Press [Centre] to view the details of a call, or [ ] to dial the number. Using call record optionsWhile viewing the call list, press <Options> to access the following options:•Details: access the call details.•Voice call: make a voice call to the number.•Video call: make a video call to the number.

27Menu functions Call log (Menu 1)•Use number: paste the selected number to the normal dialling screen.•Save to Contacts: save the number to Contacts.•Send message: send a message to the selected number using SMS, MMS, or file messenger.•Delete: delete the call record.•Delete all: delete all records.Dialled calls(Menu 1.2)This menu displays the most recent calls you have dialled.Received calls(Menu 1.3) This menu displays the most recent calls you have received.Current contacts (Menu 1.4)This menu displays all of the contacts you have dialled, received, or missed.Delete all (Menu 1.5)Use this menu to delete all of the records in each call type.1. Press [Centre] to check the call types to clear.2. Press <Delete>.3. Press <Yes> to confirm the deletion.Data calls (Menu 1.6)Use this menu to view the total amount of sent or received data.•Total sent: check the total amount of data you have sent.•Total received: check the total amount of data you have received.To reset a counter or all counters, press <Options> and select Reset or Reset all.Calls cost(Menu 1.7) This network feature displays the cost of calls. This menu is available only if your USIM/SIM card supports this feature. Note that this is not intended to be used for billing purposes.•Total costs: check the total cost of all your calls. If the total cost exceeds the maximum cost set in Edit cost limit, you must reset the counter before you can make another call.•Last call cost: check the cost of your last call.•Max cost: check the maximum cost set. Press <Options> to access the following options:•Reset call cost: reset the cost counters.•Edit cost limit: set the maximum cost authorised for your calls.•Setup currency: set the currency that is applied when the cost of your call is calculated.

Menu functions28Calls time(Menu 1.8) This menu displays the time log for voice and video calls made and received. The actual time invoiced by your service provider will vary.• Total dialled: check the total length of voice calls dialled.• Total received: check the total length of voice calls received.• Total dialled: check the total length of video calls dialled.• Total received: check the total length of video calls received.To reset a counter or all counters, press <Options> and select Reset or Reset all.Contacts (Menu 2)You can store phone numbers on your USIM/SIM card and in your phone’s memory. The USIM/SIM card and phone’s memory are physically separate, but they are used as a single entity called Contacts. In the Contacts menu, you can manage your Contacts entries.To access this menu, press [Centre] in Idle mode and select Contacts.Search contact (Menu 2.1)Use this menu to search for numbers in Contacts.Finding an entry1. Enter the first few letters of the name that you want to find.2. Select the name you want from the list.3. Press [ ] to dial the number, or [Centre] to edit the contact information.Using contact optionsWhile viewing contact details, press <Options> to access the following options:•Edit: edit contact information.•Send message: send a message to the selected number using SMS, MMS, or file messenger.•Special options: set the following options:Picture: assign a caller ID image to alert you to a call from the number.

29Menu functions Contacts (Menu 2)Ringtone: assign a ringtone to alert you to a call from the number.Msg. alert tone: select a ringtone to alert you to an incoming message from the number.•Add to speed dial: set the selected number as a speed dial entry.•Video call: make a video call.•Copy to SIM/Copy to phone: copy the contact from the phone’s memory to the SIM card, or vice versa.•Send name card: send the contact via SMS, e-mail, file messenger, or Bluetooth. •Use number: paste the selected number to the normal dialling screen.•Delete: delete the contact.While viewing the contact list, press <Options> to access the following options:•Details: access contact information.•Edit: edit contact information.•Video call: make a video call.•New: add a new contact.•Delete: delete the contact.•Search groups: access the caller group list.•Service number: access service numbers preset by your service provider.•Delete all: delete all contacts.New contact (Menu 2.2)Use this menu to add a new contact to Contacts.Storing a number in the phone’s memory1. Select Phone.2. Change the settings or enter information about the contact:•First name/Last name: assign a name.•Phone number: add a phone number.•Work Email: assign a business e-mail address.•Home Email: assign a personal e-mail address.•Group: assign a caller group.•Homepage: enter a homepage address.•Birthday: enter the person’s birthday.•More information: enter the job title, department, company, nickname, and additional note of the person.3. Press <Options> and access the following options to add additional information:•Special options: assign a caller ID image, call ringer, or message ringer for the contact.•Add phone number: add a number category to the contact.•Delete phone number: remove the selected number category from the contact entry.

Menu functions30•Change type: change the number type from the contact entry.•Mark video call: set the selected number as a video call number.4. Press [Centre].Storing a number on the USIM/SIM card1. Select SIM.2. Enter information about the contact:•Name: assign a name.•Phone number: enter a phone number.•Group: (For USIM) assign a caller group.•Location number: assign a location number.3. If you are using a USIM card, press <Options> to add additional information:•Add item: add a number type to the contact.•Delete item: remove the selected category from the contact.4. Press <Save> to save the contact.Groups (Menu 2.3)Use this menu to organise your contacts in caller groups.Adding members to a caller group1. Select a group.2. Press [Centre] to check the contacts you want.3. Press <Save>.Managing caller groupsFrom the group list, press <Options> to access the following options:•View members: display the members of the selected group.•Add member: add contacts to the selected group.•Add group: add a new group.•Rename group: change the group name.•Delete group: delete the selected group. •Delete all groups: delete all groups including default groups.Speed dial (Menu 2.4)Use this menu to assign speed dial numbers (2 to 9) to 8 of your most frequently called numbers.Assigning speed dial entries1. Select a key location from 2 to 9. Key 1 is reserved for your voice mail server.2. Select the contact you want from the contact list.3. Select a number.Managing speed dial entriesFrom the Speed dial screen, press <Options> to access the following options:•Add: assign a number to an unassigned key.•Details: check the name and number assigned to a key.

31Menu functions Contacts (Menu 2)•Video call: make a video call.•Change: assign a different number to a key.•Remove: clear the speed dial setting for a key.Dialling speed dial entriesIn Idle mode, press and hold the appropriate key.My name card(Menu 2.5)Use this menu to create your name card and send it to other people.Saving your name cardThe procedure for creating your name card is the same as the one for saving a number in the phone’s memory.p. 29 Using name card optionsAfter saving your name card, press <Options> to access the following options:•Edit: edit the name card. •Send name card: send the name card via SMS, e-mail, file messenger, or Bluetooth.•Delete: delete the name card.Copy all (Menu 2.6)Use this menu to copy all of the contacts stored on the USIM/SIM card to the phone’s memory, or vice versa.Own number (Menu 2.7)Use this feature to check your phone numbers, or to assign a name to each of the numbers. Changes made here do not affect the actual subscriber numbers on your USIM/SIM card.Service number(Menu 2.8) Use this menu to view the list of Service Dialling Numbers (SDN) assigned by your service provider, including emergency numbers and numbers for directory enquiries. This menu is available if your USIM/SIM card supports SDN.1. Scroll to the number you want.2. Press <Call> or [ ].Settings(Menu 2.9)Use this menu to change the default settings for Contacts entries.•Viewing settings: select whether the contact list is sorted by last name or by first name.•Default storage settings: select a default memory location to save contacts. If you select Optionally, the phone will ask you to select a memory location when saving a number.Memory status (Menu 2.0)Use this menu to view the number of contacts you have stored and total number of contacts you can store in Contacts.

Menu functions32Applications (Menu 3)Use this menu to play media files, to record a voice memo, to set time zone, or to use the phone as a calculator or converter.To access this menu, press [Centre] in Idle mode and select Applications.SAT (Menu 3.1)This menu is available if you use a USIM/SIM card that supports SIM Application Tool kit menus and provides additional services, such as news, weather, sports, entertainment, and location services. Available services may vary, depending on your service provider’s plans.For details, see your USIM/SIM card instructions or contact your service provider.Media player (Menu 3.2)You can enjoy music and video files from the phone’s memory. First, you need to save files to your phone’s memory.Downloading or receiving music or video filesYou can play the following types of files on your phone:• Music: MP3, AAC+, enhanced AAC+• Video: MP4, H.263, 3GPUse the following methods to save music or video files to your phone’s memory:• Download from the wireless webp. 36• Download from a computer using Samsung PC StudioSamsung PC Studio User’s Guide• Receive via Bluetoothp. 67Creating a play listAdd the media files to the play list so you can play them.1. From the media player screen, press [Centre].2. Press <Options> and select Add.3. Select Folder or Files. 4. Check the files you want or scroll to the folder you want.5. Press <Add> or <Select>.6. To play files, press [Centre].Playing media files1. From the media player screen, press [Centre].2. Select a file. The file plays.During playback, use the following keys:Keys FunctionCentre Pauses or resumes playback.Left Moves back to the previous file. Moves backward in a file when held down.

Menu functions34Playing music files with the phone closedPress and hold [ ] to launch the media player and start playback. Use the following keys to control the media player:Voice memo(Menu 3.3)Use this menu to record voice memos. A voice memo can be up to one hour long.Recording a voice memo1. Press [Centre] to start recording. 2. Speak into the microphone.Press [Centre] to pause or resume the recording.3. Press <Stop> or [Down]. The voice memo is automatically saved.4. Press [Centre] to review the memo, or [Up] to record additional memos.Playing a voice memo1. From the voice recorder screen, press <Options> and select Go to sounds.2. Select the Voice memos folder.3. Select a voice memo. The memo plays.During playback, use the following keys: Using voice recorder optionsFrom the voice recorder screen, press <Options> to access the following options:•Play: play the selected voice memo in Review mode.•Record: record a new voice memo.•Go to sounds: access the voice memo list.•Send: send the file via MMS, e-mail, file messenger, or Bluetooth.•Delete: delete the file.•Rename: change the file name.Key FunctionPauses or resumes playback. Closes the media player when held down.Moves back to the previous file. Moves backward in a file when held down.Skips to the next file. Skips forward in a file when held down.Volume Adjusts the volume.keys FunctionCentre Pauses or resumes playback.Left Moves backward.Right Skips forward.Volume Adjusts the volume.Down Stops playback.Up Switches to Review mode () or back to Record mode ( ).

35Menu functions Applications (Menu 3)•Hidden from Bluetooth: hide the file so that other Bluetooth devices cannot access it.•Visible to Bluetooth: share the file with other Bluetooth devices.•Details: access the file properties. •Record settings: customise the default settings for the voice recorder.Default name: change the default prefix of file names.Recording time: select a maximum recording time.World clock(Menu 3.4)Use this menu to set your local time zone and find out what time it is in another part of the world. Setting the local time zone1. From the world map, press [Left] or [Right] to scroll to the city you want on the upper line ( ). As the time line moves, the time and date of the given zone display.2. Press [Centre] to save the time zone.Viewing world time1. From the world map, move to the lower line ().2. Press [Left] or [Right] to scroll to the city you want.3. Press [Centre] to save the time zone.Applying Daylight Savings Time1. From the world map, press <Options> and select Summer time.2. Press [Centre] to check the time zones you want. 3. Press <Select>.4. Press [Centre].Calculator(Menu 3.5) Use this menu to perform basic arithmetic functions such as addition, subtraction, multiplication, and division.Performing a calculation1. Enter the first number. Press [ ] to include a decimal point.2. Enter the operation for your calculation by pressing the Navigation keys.3. Enter the second number.4. Press [Centre] to view the result.Using calculator optionsPress <Options> to access the following options:•Equal: view the result.•Recent calculation: display the last result you calculated.•Save to memory: save a value into the calculator memory.•Recall memory: retrieve the saved value.•Clear memory: clear the saved values.

Menu functions36Converter(Menu 3.6)Use this menu for common conversions, such as currency and temperature.Performing a conversion1. Select the converter type you want.2. Press [Left] or [Right] to select the original unit and press [Down].3. Enter the value to be converted and press [Down].• Press [ ] to insert a decimal point.• Press [ ] to change the temperature to above zero (+) or below zero (-).4. Press [Left] or [Right] to select the unit to which you want to convert.The equivalent value for the amount you entered displays.Using converter optionsPress <Options> to access the following options:•Clear: clear the current values.•Reverse: reverse the conversion.•Currency rates: display the currency rate list.Internet (Menu 4)The Wireless Application Protocol (WAP) browser on your phone allows you to access the wireless web. Using the web browser, you can access up-to-the-minute information and a wide variety of media contents, such as wallpapers, ringtones, and music files.To access this menu, press [Centre] in Idle mode and select Internet.Go to homepage (Menu 4.1)You can launch the web browser and access the homepage of the web service provided by your service provider.Navigating the web browserUsing browser menu optionsFrom any web page, press <Options> to access the following browser options:•Go to homepage: go back to the homepage.•Enter URL: manually enter the URL address of the web page you want to access.To Pressscroll through browser items [Up] or [Down]. select a browser item [Centre] or <Select>.return to the previous page <Back> or [C].

39Menu functions Messages (Menu 5)•Save to Drafts: save the message in the Drafts box.2. Press [Centre].3. Enter a destination number.To send the message to more than one recipient, fill in additional destination fields.4. Press [Centre] to send the message.Multimedia message (Menu 5.1.2) Multimedia Message Service (MMS) delivers messages containing a combination of text, image, video, and audio, from phone to phone or from phone to e-mail.1. Enter the message subject.2. Select the Text line.3. Enter the message text and press [Centre].Press <Options> to access the following options:•Input method: change the text input mode.•Input language: change the language used in T9 input mode.•Insert: insert a text template, Contacts entry, or bookmarked URL address into text.4. Select the Picture or Video or Audio line and add an image, video, or sound file.5. Press <Options> to access the following options for editing the message:•Preview: view the message as it will be shown on the recipient’s phone.•Edit text/Change file: edit the added text, image, or sound file.•Delete text/Delete file: delete the added text, image, or sound file.•Save to Drafts: save the message in the Drafts box.•Add page: add a page. Move to each page by pressing [Left] or [Right].•Move page: move the current page to the next or previous page.•Delete page: delete the added page.•Edit style: change the page properties.- This page: set the page duration and change font colour and style for the selected page.- All page: change the background colour and page layout.• The maximum size allowed for a message can differ, depending on your service provider.• Depending on the file type or DRM (Digital Rights Management) system, some files may not be able to be forwarded.

Menu functions40•Save as template: save the message as a template in the Multimedia templates folder.6. When you have finished, press [Centre].7. Enter a phone number or e-mail address.To send the message to more than one recipient, fill in additional destination fields.8. Press [Centre] to send the message.File messenger (Menu 5.1.3)Use this menu to send multiple media files by attaching them to an MMS message. 1. Enter a subject in the Subject line.2. Move to the Message field.3. Enter the message text and press [Centre].Press <Options> to access the following options:•Input method: change the text input mode.•Input language: change the language used in T9 input mode.•Insert: insert a text template, Contacts entry, or bookmarked URL address into text.4. Select the Attach files line.5. Scroll to a media file folder and press [Centre] to check files.6. Press <Options> and select Attach.7. Press <Options> to access the following options:•Attached file list: display the file list you attached.•Add name card: attach a Contacts entry as a name card.•Add v-calendar: attach calendar data as a data format attachment.•Delete all attachments: delete all attachments.•Save to Drafts: save message in the Drafts box.8. When you have finished, press [Centre].9. Enter a phone number or e-mail address.To send the message to more than one recipient, fill in additional destination fields.10.Press [Centre] to send the message.Email (Menu 5.1.4)You can send and receive e-mails that include text, audio, and images. To use this feature, you need to subscribe to an e-mail service and set up your e-mail account.p. 481. Enter the e-mail subject.2. Move to the Message field.3. Enter the message text and press [Centre].Press <Options> to access the following options:•Input method: change the text input mode.

41Menu functions Messages (Menu 5)•Input language: change the language used in T9 input mode.•Insert: insert a text template, Contacts entry, or bookmarked URL address into text.4. Select the Attach files line.5. Scroll to a media file folder and press [Centre] to check files.6. Press <Options> and select Attach.7. Press <Options> to access the following options for editing the message:•Attached file list: access the file list you attached.•Add name card: attach a Contacts entry as a name card.•Add v-calendar: attach calendar data as a data format attachment.•Delete all attachments: delete all attachments.•Save to Drafts: save the message in the Drafts box.8. When you have finished, press [Centre].9. Enter an e-mail address.To send the e-mail to more than one recipient, fill in additional destination fields. 10.Press [Centre] to send the e-mail.Inbox (Menu 5.2)This folder stores all types of messages you have received, except for e-mails.Viewing a messageThe following icons may appear on the message list to show the message type: • SMS• MMS• MMS notification• Push message from web servers.• Configuration message, containing network parameters from your service provider.• USIM/SIMUsing message optionsWhile viewing a message, press <Options> to access the following options:SMS messages•Call/Go to URL/Go to RTSP: dial the highlighted phone number or access the highlighted web link.• Depending on the DRM (Digital Rights Management) system, messages having web content may not be able to be forwarded. • A ! icon next to a message means that the message is of high priority. A grey-coloured message icon indicates low priority.

Menu functions42•Reply: reply to the sender via SMS, MMS, or file messenger. •Forward: forward the message to other people.•Call back: dial the phone number of the sender.•Save to Contacts: extract phone numbers or e-mail addresses from the message and save them in Contacts.•Move to SIM/Move to phone: move the message between the phone’s memory and the USIM/SIM card.•Delete: delete the message.MMS messages•Play: play the message.•Call/Go to URL/Go to RTSP: dial the highlighted phone number or access the highlighted web link.•Add to favourites: save the highlighted web link to the bookmark list.•Create email: send an e-mail to the highlighted e-mail address.•Create multimedia message: send an MMS message to the highlighted e-mail address.•Reply: send a reply to the sender.•Reply to all: send a reply to the sender and all recipients.•Forward: forward the message to other people.•Send to Album: send the message to the online media album, if provided.•Call back: dial the phone number of the sender.•Save as template: save the message as a template in the Multimedia templates folder.•Save files: save media items from the message into your phone’s memory.•Save to Contacts: extract phone numbers or e-mail addresses from the message and save them in Contacts.•Delete: delete the message.•Details: access the message properties.Push messages•Go to URL/Go to RTSP: connect to the URL specified in the message.•Delete: delete the message.Configuration message•Install: apply the configuration value in the message to the phone.•Delete: delete the message.Delivery reports•Save contact to: extract URLs, e-mail addresses, or phone numbers from the report.•Delete: delete the report.

43Menu functions Messages (Menu 5)Drafts (Menu 5.3)This folder stores messages you have saved to send them at a later time. From the message list, press <Options> to access the following options:•View: open the selected message.•Edit: edit the selected message.•Send: send the selected message.•Sort by: change the sort order of the list.•Delete: delete the selected message.•Delete all: delete all messages.Outbox (Menu 5.4)This folder stores messages the phone is attempting to send or has failed to send. The following icons on the message icons indicates the sending status:• Being sent• Failed to sendFrom the message list, press <Options> to access the following options:•View: open the selected message.•Send again: resend the message.•Edit: edit the selected message.•Cancel sending: cancel sending the message.•Sort by: change the sort order of the list.•Delete: delete the message.•Delete all: delete all messages.•Details: access the message properties.Sent box (Menu 5.5)This folder stores messages that you have sent. From the message list, press <Options> to access the following options:•View: open the selected message. •Forward: forward the message to other people.•Sort by: change the sort order of the list.•Delete: delete the message.•Delete all: delete all messages.•Details: access the message properties.Email inbox (Menu 5.6)This folder stores e-mails that you have received.Viewing received e-mails1. Press <Options> and select Download.The phone checks the e-mail server and downloads new e-mails. The icons tell you the status of each e-mail:• : Retrieved e-mail• : Retrieved e-mail with attachments.• : E-mail not retrieved• Depending on the file type or DRM (Digital Rights Management) system, some files may not be able to be forwarded.• A ! icon next to a message means that the message is of high priority. A grey-coloured message icon indicates low priority.

Menu functions442. Select an e-mail or header.3. If the e-mail has more than one page, press [Volume] to scroll through pages one by one. 4. Select an attached file to view or play it.Using e-mail optionsWhile viewing the e-mail list or an e-mail, press <Options> to access the following options: •View: open the selected e-mail.•Retrieve: retrieve the body of the selected e-mail header from the e-mail server.•Reply: send a reply to the sender.•Reply to all: send a reply to the sender and all recipients.•Forward: forward the e-mail to other people.•Download: retrieve new e-mails or headers from the e-mail server.•Sort by: change the sort order of the list.•Save files: save the files attached to the e-mail in the phone’s memory.•Save to Contacts: extract phone numbers ore-mail addresses from the e-mail and save them in Contacts.•Block: add the sender’s e-mail address or e-mail subject to the Block list to reject e-mails from that address or containing that subject.•Delete from phone: delete the selected e-mail or all e-mails from the phone’s memory.•Delete permanently: delete the selected e-mail or all e-mails from both the phone’s memory and the e-mail server.•Email accounts: change the active e-mail account.•Details: access the e-mail properties.Media Album(Menu 5.7)Use this menu to access the Media Album service, with which you can organise your own online media album, adding media content and messages via the wireless web. This menu is only available if supported by your service provider.Templates(Menu 5.8)Use this menu to create, edit, and send text templates and MMS templates.Text templates (Menu 5.8.1)You can create SMS templates with the sentences you use frequently so that you can retrieve and insert them when composing an SMS message.Creating a template1. Press <New>, or press <Options> and select New, if one has been already stored.2. Enter a message and press [Centre].

45Menu functions Messages (Menu 5)Using template optionsFrom the text template list, press <Options> to access the following options:•Send: send the template as an SMS, MMS, file messenger, or e-mail.•New: add a new template.•Edit: change the selected template.•Delete: delete the template.•Delete all: delete all templates.Multimedia templates (Menu 5.8.2)You can create MMS templates so that you can use them in composing an MMS message.Creating a template1. Press <New>, or press <Options> and select New, if one has been already stored.2. Create a template as you would when creating an MMS message.3. Press [Centre] to save the template.Using template optionsFrom the template list, press <Options> to access the following options:•View: open the selected template.•Send: create and send a new message.•New: add a new template.•Edit: change the selected template.•Delete: delete the template.•Delete all: delete all templates.Broadcast (Menu 5.9)Your phone receives Cell Broadcast (CB) messages, which are text messages related to various topics, such as weather forecast, traffic, and news report, from networks. Use this menu to access received CB messages.Viewing a CB messageAll CB messages are stored in the Temporary folder and will be deleted after a period of time. If you don’t want a message to be deleted, save it to the Archive folder. While viewing the message, press <Options> and select Save.Using message optionsWhile viewing a message, press <Options> to access the following options:•Call/Go to URL/Go to RTSP: dial the highlighted phone number or access the highlighted web link.•Create email: create an e-mail.•Save: save the message in the Archive folder.•Delete: delete the message.

49Menu functions Messages (Menu 5)POP3 server/IMAP4 server: enter the IP address or host name of the POP3 or IMAP4 server.POP3 port/IMAP4 port: enter the POP3 or IMAP4 port number.Use SSL: activate the use of the SSL (Secured Sockets Layer) protocol.IMAP4 retrieving option: (IMAP4 protocol only): set whether the phone retrieves only new messages or all messages.Retrieving option: set which part of e-mails the phone retrieves from the server.Keep in server: leave the copies of e-mails in the server after retrieving. My Address: set your e-mail address.User name: enter the POP3 or IMAP4 user name.Password: enter the POP3 or IMAP4 password.Use SMTP Authentication: enable SMTP authentication, which requires the user to log in before sending e-mails.Same as POP3/IMAP4: select if you want the SMTP server to have the same parameters as the POP3 or IMAP4 server.User name: enter the SMTP user name.Password: enter the SMTP password. Voice mail (Menu 5. .4)Use this menu to set the number of the voicemail server.Push message (Menu 5. .5)You can determine whether or not your phone receives push messages.Broadcast (Menu 5. .6)You can change the settings for receiving CB messages.•Receive: select to receive CB messages, or not.•Channel list: indicate the channels from which you wish to receive CB messages. Please contact your service provider for further details.•Language: select the preferred languages in which CB messages display.Memory status(Menu 5. )Use this menu to view the memory status for SMS, MMS, e-mail, and push messages.You must store the voicemail server number before accessing the server. Your service provider can give you the number.

Menu functions50File manager (Menu 6)The File manager menu allows you to access images, videos, ringtones, and sounds stored in the phone’s memory.To access this menu, press [Centre] in Idle mode and select File manager.Tips for Digital Rights ManagementAs a result of the Digital Rights Management (DRM) system, some of the media items you download from the Internet or receive by MMS may require a licence key to access them. You can acquire the key from the website which owns the rights to the content; use the Activate option. Note the following icons on the list: • : Forwardable item with a valid key.• : Forwardable item without a valid key.• : Unforwardable item with a valid key.• : Unforwardable item without a valid key.Your service provider supports only count-based or unlimited-access DRM files.ImagesUse this menu to access photos you have taken and images you have downloaded, received in messages, or imported from your computer.Viewing an image1. Scroll to an image folder.2. Select an image.Viewing a slide showYou can view your images as a slide show, a sequential presentation of each image in the current folder.1. Select an image folder.2. Select an image. 3. Press <Options> and select Slide show.The slide show begins.4. Press <Back> to stop the slide show.Editing an image1. Select a photo.2. Press <Options> and select Edit.3. Press <Options> and change the photo using the following options:•Resize: change the image size.•Effects: change the colour tone or apply a special effect to the photo.•Adjust: adjust the brightness, contrast, or colour balance.•Frames: apply a decorative frame.•Cliparts: add an image clip to the photo.•Insert text: add text to the photo.

51Menu functions File manager (Menu 6)•Rotate: rotate the photo clockwise or counterclockwise.•Flip: flip the photo vertically or horizontally.•Crop: select a variously sized and shaped section of the photo.4. When you have finished, press [Centre].5. Enter a photo name and press <Save>.Using image optionsWhile viewing a file, press <Options> to access the following options:•Send: send the selected file via MMS, e-mail, file messenger, or Bluetooth. You can also send the file to the online media album, if provided.•Hidden from Bluetooth: hide the file so that other Bluetooth devices cannot access it.•Visible to Bluetooth: share the file with other Bluetooth devices.•Set as: set the image as your wallpaper for the displays or a caller ID image for a Contacts entry.•Move: move the file to another folder.•Copy: copy the file to another folder.•Real size: view the image in its actual size. Press <Phone size> to fit the image to the display.•Slide show: view all images as a slide show.•Activate key: get a new license key when the key for the selected DRM file expires.•Reactive key: get another license key even when the key for the selected DRM file has not expired.•Edit: edit the image and save it as a different file.•Delete: delete the file.•Rename: change the file name.•Details: access the file properties.•Key management: manage license keys you have acquired.Downloading images1. Scroll to the Downloads folder.2. Select More pictures. You are connected to the preset website by your service provider.3. Search for the file you want and follow the onscreen instructions to download it.VideosUse this menu to access video clips you have recorded, downloaded, received in messages, or imported from your computer.Playing a video clip1. Scroll to a video folder.2. Select a video clip. The media player opens.p. 32Video clips recorded on other devices, such as camcorders, may not play correctly.

Menu functions52Using video optionsFrom the video list, press <Options> to access the following options:•Play: play the selected file.•Add to play list: add the selected file to the play list.•Send: send the selected file via MMS, e-mail, file messenger, or Bluetooth. You can also send the file to the online media album, if provided.•Hidden from Bluetooth: hide the file so that other Bluetooth devices cannot access it.•Visible to Bluetooth: share the file with other Bluetooth devices.•Activate key: get a new license key when the key for the selected DRM file expires.•Reactive key: get another license key even when the key for the selected DRM file has not expired.•Move: move the file to another folder.•Copy: copy the file to another folder.•Delete: delete the selected file or all files.•Rename: change the file name.•Lock/Unlock: lock the file to prevent it from being deleted, or unlock the file.•New folder: add a new folder.•Details: access the file properties.•Memory status: access the memory information for each folder in File manager.•Key management: manage license keys you have acquired.Downloading video clips1. Scroll to the Downloads folder.2. Select More videos. You are connected to the preset website by your service provider.3. Search for the file you want and follow the onscreen instructions to download it.MusicThis menu displays AAC or MP3 music files you have downloaded or received in messages.Playing a music fileSelect a music file. The selected music file plays.p. 32Using music optionsFrom the music list, press <Options> to access the following options:•Play: play the selected file.•Add to play list: add the selected file to the play list.•Send: send the selected file via MMS, e-mail, file messenger, or Bluetooth.•Hidden from Bluetooth: hide the file so that other Bluetooth devices cannot access it.

53Menu functions File manager (Menu 6)•Visible to Bluetooth: share the file with other Bluetooth devices.•Set as ringtone: set the file as a ringtone for voice calls or video calls.•Set as caller ID: set the file as a caller ringer ID.•Activate key: get a new license key when the key for the selected DRM file expires.•Reactive key: get another license key even when the key for the selected DRM file has not expired.•Delete: delete the file.•Rename: change the file name.•Lock/Unlock: lock the file to prevent it from being deleted, or unlock the file.•New folder: add a new folder.•Details: access the file properties.•Memory status: access the memory information for each folder in File manager.•Key management: manage license keys you have acquired.Downloading music files1. Select More music. You are connected to the preset website by your service provider.2. Search for the file you want and follow the onscreen instructions to download it.SoundsUse this menu to access voice memos you have recorded, and sound files you have downloaded, received in messages, or imported from your computer. Playing a sound clip1. Select a sound folder.2. Select a sound clip. The music player opens and the selected sound plays. For a voice memo, see Voice memos.p. 34During playback, use the following keys:Using sound optionsDuring a playback, press <Options> to access the following options:•Send: send the selected file via MMS, e-mail, file messenger, or Bluetooth.•Set as ringtone: set the file as a ringtone for voice calls or video calls.Keys DescriptionLeft Goes to the previous file.Right Skips to the next file.Up/Down/Volume Adjusts the volume.Centre Allows you to send the selected file to other people.

Menu functions56•Week view: display the weekly view screen.•Go to today: go to today’s date.•Go to date: enter a specific date.•Start date: set whether the calendar starts with Sunday or Monday.•Delete: delete the items for the specific period.•Delete all: delete all of the items in the calendar.Creating an itemYou can store schedule items, anniversaries, tasks, and memos on the calendar. More than one item per day can be stored.Entering a new schedule item1. Select a date on the calendar. 2. Press <Options> and select New → Schedule.3. Enter information or change the settings:•Title: enter the title for the schedule item.•Details: enter the details of the schedule item.•Start and End: enter the starting and ending times for the schedule item.•Start date and End date: enter the starting and ending dates for the schedule item.•Location: enter information about the schedule item. •Alarm: set an alarm for the schedule item.•before: set how long before the schedule item the alarm is to alert you.•Repeat: set the schedule item to recur. You can select a repeat unit.•until: set the ending date, if the schedule item will recur.•Expiry: set when the schedule item will be deleted from the calendar. 4. Press <Options> and select Save to save the schedule item.Entering a new anniversary1. Select a date on the calendar.2. Press <Options> and select New → Anniversary.3. Enter information or change the settings:•Occasion: enter information about the anniversary.•Date: enter the date.•Alarm: set an alarm for the anniversary.•before: set how long before the anniversary the alarm is to alert you.•alarm time: enter the time for the alarm to ring.•Repeat every year: set the phone to remind you of the anniversary every year.4. Press <Options> and select Save.Entering a task1. Select a date on the calendar.2. Press <Options> and select New → Task.3. Enter information or change the settings:

57Menu functions Organiser (Menu 7)•Title: enter the title for the task.•Task: enter the task content.•Start date: enter the starting date.•Due date: enter the ending date.•Priority: select a priority level.4. Press <Options> and select Save.Entering a memo1. Select a date on the calendar.2. Press <Options> and select New → Memo.3. Enter the memo text and press [Down].4. Enter the date.5. Press <Options> and select Save.Viewing an itemOnce you have scheduled things, the square brackets appear on the corner of the date call.Accessing an item1. Select a date on the calendar to display the items for the day. 2. Select an item to view its details.The following icons indicate the type of item:Using event optionsFrom the item list, press <Options> to access the following options:•View: access the selected item.•New: add a new item.•Completed/To do: change the status of the selected task.•Month view: switch to the monthly view screen.•Week view: switch to the weekly view screen.•Change date/Change due date/Reschedule: change the date of the item.•Delete: delete the selected item.•Delete all: delete all of the items for the selected day.•Send schedule/Send task: send the item via SMS, e-mail, file messenger, or Bluetooth.•Send memo: send the memo via SMS.Week view(Menu 7.3)Use this menu to view items for the selected week. The current date is marked in blue. Square brackets on a calendar date indicate the types of items scheduled for that day.1. Scroll up to the date line and press [Left] or [Right] to access another week.2. Select the time cell that contains the item you want.Today’s events(Menu 7.4)Use this menu to view items for the selected date.Select an item to view its details. The item opens in Edit mode.• Scheduled events • Anniversaries• Tasks • Memos

Menu functions58Schedule(Menu 7.5)This menu displays the schedule items. If you have set the Repeat and Alarm options, the and icons display. Select a schedule item to view its details.Anniversary (Menu 7.6) This menu displays anniversaries you have created. If you have set the Repeat and Alarm options, the and icons display. Select an anniversary to view its details.Task(Menu 7.7)Use this menu to display tasks you have created. The icons on the right indicate the importance; the lower the number on the icon, the higher the priority. A check mark appears in the status check box if the task has been completed. Select a task to view its details.Memo(Menu 7.8)This menu displays memos you have created.Select a memo to view its details. Missed event alarm(Menu 7.9)When you are unable to acknowledge an alarm for a scheduled appointment or anniversary, the phone stores the alarm until you confirm it.1. Select an item.2. Press <Confirm> to confirm and delete the item.Memory status (Menu 7.0)This menu displays the number of items of each type you have created, and the total number of items you can store.

59Menu functions Camera (Menu 8)Camera (Menu 8)You can use the camera module embedded in your phone to take photos and record videos. Using the Camera menu, you can turn on the camera.To access this menu, press [Centre] in Idle mode and select Camera, or press and hold [ ]. Taking a photoThe camera will produce JPEG photos.Taking a photo with the phone open1. Access the Camera menu to turn on the camera and switch the display to Capture mode. You can also press and hold [ ] in Idle mode.2. Press [ ] to switch between the interior lens below the display and the exterior lens on the external of the phone.3. Make any desired adjustments.• Press < > to use the camera options. next section• Use the keypad to change the camera settings or switch to other modes.p. 604. Press [Centre] to take a photo. The photo is saved in the Pictures folder.Using camera options in Capture modeIn Capture mode, press < > to access the following options:•Take photo: take a photo.•Record video: switch to Record mode.•Switch camera: switch between the interior lens and the exterior lens.•Go to Photos: access the Pictures folder.p. 50•Shooting mode: take a photo in the following modes:Single shot: take a photo in Normal mode. You can select whether or not the camera automatically saves a photo.Multi shot: take a series of action stills. You can select the number of photos the camera will take.• Do not take photos of people without their permission.• Do not take photos in a place where cameras are not allowed.• Do not take photos in a place where you may interfere with another person’s privacy.When you take a photo in direct sunlight or in bright conditions, shadows may appear on the photo.5.To Pressuse photo options <Options>.p. 61delete the photo <Delete> or [C], and then <Yes>.return to Capture mode [Centre].

Menu functions60Mosaic shot: take several stills and save them in one frame. You can select the layout.•Effects: change the colour tone of the image.•Frames: apply a decorative frame.•Timer: set a time delay before the camera takes a photo.•Zoom: display the zoom control bar and zoom in or out by pressing [Up] or [Down].•Brightness: display the brightness control bar and adjust the brightness by pressing [Left] or [Right].•Camera settings: change the default settings for taking a photo.Default name: change the default prefix of file names.Viewfinder: select a preview screen.Shutter sound: select a camera shutter sound.Capture quality: select an image quality. Image size: select an image size. Multi shot speed: select the shooting speed in Multi Shot mode.Spot metering: adjust the exposure based on a specific area of the image. Select On to display the spot focus frame in the middle of the image, and change the exposure according to the brightness of the image fragment in the frame.White balance: adjust the colour balance of the photo. You can make your photo appear warmer or cooler.•Camera shortcuts: view the functions of the keys you can use in Capture mode.Using the keypad in Capture modeYou can use the keypad to customise your camera settings in Capture mode.Key FunctionVolume up Flips the image vertically.Volume down Shows the mirror image.Left/Right Adjusts the brightness.Up/Down Zooms in or out.1Switches to Record mode.p. 612Changes the image size.3Changes the image quality.4Changes the shooting mode.5Changes the colour tone.7Selects a decorative frame.8Sets the timer.9Goes to the Pictures folder.p. 50Changes the preview mode.

61Menu functions Camera (Menu 8)Using photo optionsAfter saving a photo, press <Options> to access the following options:•Viewfinder: return to Capture mode.•View: access one of the multi-shot photos.•Send: send the file via MMS, e-mail, file messenger, or Bluetooth.•Delete: delete the file.•Set as: set the photo as wallpaper for displays, or as a caller ID image for a Contacts entry.•Go to Photos: access the Pictures folder.p. 50•Rename: change the file name.Taking a photo with the phone closed1. Press and hold [ ].• Press [Volume up] to flip the image vertically.• Press [Volume down] to view the mirror image.2. Press [ ] to take a photo. The photo is automatically saved.Recording a videoYou can record a video of what is displayed on the camera screen and save it.1. Access the Camera menu to turn on the camera or press and hold [ ] in Idle mode.2. Press [1] to switch to Record mode.3. Press [ ] to switch between the interior lens below the display and the exterior lens on the external of the phone.4. Make any desired adjustments.• Press < > to use the camera options. next section• Use the keypad to change the camera settings or switch to other modes.p. 605. Press [Centre] to start recording.Press <Pause> to pause.6. Press [Centre] to stop recording. The video automatically saves in the Videos folder.Using camera options in Record modeIn Record mode, press < > to access the following options:•Record: start recording.•Take photo: switch to Capture mode.•Switch camera: switch between the interior lens or exterior lens.•Go to Videos: access the Videos folder.p. 517.To Pressuse the video options <Options>.p. 62delete the video clip <Delete> or [C], and then <Yes>.return to Record mode [Centre].

Menu functions62•Effects: change the colour tone of the image.•Zoom: display the zoom control bar and zoom in or out by pressing [Up] or [Down].•Brightness: display the brightness control bar and adjust the brightness by pressing [Left] or [Right].•Video settings: change the following settings for recording a video:Default name: change the default prefix of file names.Quality: select an image quality. Recording time: select a video recording mode.Select Limit for MMS to record a video suitable for an MMS message.Select Normal to record a video within the limit of the currently available memory. The length of your video is determined by how much memory has been used.Size: select a frame size.Audio record: turn the audio on or off.•Camcorder shortcuts: view the functions of the keys you can use in Record mode.Using the keypad in Record modeUsing video optionsAfter saving a video clip, press <Options> to access the following options:•Play: play back the file.•Viewfinder: return to Record mode.•Send: send the file via MMS, e-mail, file messenger, or Bluetooth.•Delete: delete the file.•Go to Videos: access the Videos folder.p. 51•Rename: change the file name.Key FunctionVolume up Flips the image vertically.Volume down Shows the mirror image.Left/Right Adjusts the brightness.Up/Down Zooms in or out.1Switches to Capture mode.p. 592Changes the frame size.3changes the image quality.4Changes the video recording mode.5Changes the colour tone of the image.7Mutes or unmutes audio.9Goes to the Videos folder.p. 51Key Function

65Menu functions Settings (Menu 9)Side key(Menu 9.3.5)Use this menu to set whether the phone mutes the call ringer or rejects a call if you press and hold [Volume] when a call comes in.Key management (Menu 9.3.6)Use this menu to manage the licence keys you have acquired to activate media contents locked by DRM systems.Press <Options> to access the following options:•View: open the corresponding media item.•Delete: delete the selected licence key.•Go to My Messages: access the message that contains the media content.•Go to my files: access the corresponding file folder.•Details: access the properties of the licence key. Display(Menu 9.4)Use this menu to change settings for the display.Greeting message (Menu 9.4.1)Use this menu to enter the greeting that is displayed on the main display or external display.Wallpaper(Menu 9.4.2)You can change the background image that is displayed on the main display.Cover LCD (Menu 9.4.3)Use this menu to select an image or text to be displayed on the external display.•Clock: select a clock type.•Cover title: enter the text you want.•Wallpaper: select an image.LCD brightness (Menu 9.4.4)Use this menu to adjust the brightness of the main display.Backlight(Menu 9.4.5) You can select the length of time the backlight or display stays on.•On: select the length of time the backlight stays on in times of inactivity.•Dim: select the length of time the display is in Dimming mode after the backlight turns off.Dialing display (Menu 9.4.6)Use this menu to customise the settings for the screen when entering a phone number for dialling.•Font type: select a font type.•Font size: select a font size.•Font colour: select a font colour.•Background colour: select a background colour.

Menu functions66Call(Menu 9.5)Use this menu to set options for call functions.Caller ID(Menu 9.5.1)This network service allows you to prevent your phone number from being displayed on the phone of the person being called. If you select By network, the phone will use the default setting provided by the network.Diverting(Menu 9.5.2)This network service reroutes incoming calls to a different phone number that you specify.1. Select the type of calls to be diverted.2. Select a call diverting option:•Always: divert all calls.•Busy: divert calls when you are on another call.•No reply: divert calls when you do not answer the phone.•Unreachable: divert calls when you are not in an area covered by your service provider or when your phone is switched off.•Cancel all: cancel all call diverting options.3. Enter the number to which the calls will be diverted in the Divert to line.4. If you selected No reply, move to the Waiting time line and select the length of time the network delays before diverting a call.5. Press <Options> and select Activate. To deactivate the call diverting, select Deactivate.Barring(Menu 9.5.3)This network service allows you to restrict your calls.1. Select the type of calls to be barred.2. Select a call barring option:•All outgoing calls: prohibit all outgoing calls.•Outgoing int’l calls: prohibit international calls.•Int’l calls exc. home: only allow calls to numbers within the current country when you are abroad, and to your home country.•All incoming calls: prohibit incoming calls.•Incoming calls when roaming: prohibit incoming calls when you use your phone outside of your home country.•Cancel all: cancel all call barring settings, allowing calls to be sent and received normally.3. Enter the call barring password supplied by your service provider.4. Press <Options> and select Activate. To deactivate the call barring, select Deactivate.some networks do not allow the user to change this setting.You can change the call barring password obtained from your service provider. From the call type list, press <Options> and select Change password.

67Menu functions Settings (Menu 9)Waiting(Menu 9.5.4)This network service informs you when someone is trying to reach you while you are on another call.1. Select the type of calls to which the call waiting option will apply.2. Press <Options> and select Activate. To deactivate the call waiting, select Deactivate. Auto redial (Menu 9.5.5)Use this menu to make up to ten attempts to redial a phone number after an unsuccessful call.Closed user group (Menu 9.5.6)Use this menu to set incoming and outgoing calls to be restricted to a selected user group. For details about how to create a closed user group, contact your service provider.•Use user group: activate CUG index numbers.•Outside access: enable calls to numbers other than those in the Closed user group. This feature depends on the nature of your CUG subscription.•Default group: enable the default CUG, if you have set one with your service provider. When making a call, you are given the option of using your default CUG, instead of selecting one from the list.•Group index: add, delete, or activate CUG index numbers. Video call (Menu 9.5.7)Use this menu to change the default settings for using the video call feature.•Show me: change the video camera settings for receipt of video calls.Optionally: you can select whether or not the video camera is used each time you answer a video call.Always: the camera is always used.•Retry by: set what to do when a video call does not connect.Voice call: the phone retries with a voice call.Multimedia message: the phone will turn on the camera and switch to Record mode so that you can record a video and send it as an MMS message.None: the phone does not retry.Connectivity(Menu 9.6)Use this menu to set options for connection available on your phone.Bluetooth (Menu 9.6.1) Using Bluetooth wireless, you can connect the phone wirelessly to other Bluetooth devices and exchange data with them, talk hands-free, or control the phone remotely.

Menu functions68Bluetooth technology allows free wireless connections between all Bluetooth-compliant devices within a range of 10 metres. Since the devices communicate using radio waves, they do not need to be in line of sight to each other. Setting up the Bluetooth featureThe Bluetooth menu provides the following options:•Activation: activate or deactivate the Bluetooth feature.•My devices: search for connectable Bluetooth devices.•My phone’s visibility: allow other Bluetooth devices to connect to your phone.•My phone’s name: assign a Bluetooth device name to your phone, which is then displayed on other devices.•Secure mode: determine if the phone asks for your confirmation when other devices access your data.•Bluetooth service: display available Bluetooth services. Searching for and pairing with a Bluetooth device1. From the Bluetooth setting options, select My devices.2. Select Search new device.After searching, a list of devices to which you can connect displays. The following icons indicate the type of device:• Hands-free car kit or headset• Mobile phone• Computer• PDA• Unknown device• PrinterThe colour of the icon indicates the status of the device:• Grey for unpaired devices• Blue for paired devices• Red for devices that are currently connected to your phone3. Select a device.4. Enter a Bluetooth PIN and press <OK>. This code is used just once and you don’t need to memories it.When the owner of the other device enter the same code, pairing is finished.• If there are obstacles between the devices, the operating distance may be reduced.• It is recommended that you don’t use the Bluetooth feature while using multimedia features, such as voice recorder, camera, and media player, or vice versa, for better performance.• Some devices may not be compatible with your phone.Some devices, especially headsets or hands-free car kits, may have a fixed Bluetooth PIN, such as 0000. If the other device has one, you must enter the code.

69Menu functions Settings (Menu 9)Using device optionsFrom the device list, press <Options> to access the following options:•Connect: connect to a headset or hands-free car kit.•Disconnect: end the connection with the connected headset or hands-free car kit.•Browse device: search for data from the device and import data directly to your phone.•Authorize device/Unauthorize device: determine if the phone asks you to permit connection when other devices try to connect to your phone.•Delete: delete the selected device or all devices.•Rename: rename the selected device.Sending data via Bluetooth1. Activate the Bluetooth feature.2. Select the application in which the item you want to send is stored. 3. Scroll to the item you want and press <Options>.4. Select Send → Via bluetooth.The phone searches for devices within range and displays a list of available devices.5. Select a device.6. If necessary, enter the Bluetooth PIN needed for pairing and press <OK>.Receiving data via BluetoothTo receive data via Bluetooth, your phone’s Bluetooth feature must be active.If an unauthorised Bluetooth device sends data to your phone, the phone displays a confirmation message. To receive data, press <Yes>.Network (Menu 9.6.2)Use this menu to change the settings for connecting to your cellular network.•Network selection: select to either automatically or manually select the network used when roaming outside of your home area. You can select a network other than your home network only if there is a valid roaming agreement between the two.•Network mode: select the network you use.Automatic: the phone scans for available networks.GSM 900/1800: the phone operates in the combined GSM 900/1800 network.GSM 1900: the phone operates in the GSM 1900 network. This option is only available in the U.S.A.UMTS: the phone operates in UMTS (3G network) networks. You can get a higher speed quality than on lower generation networks, and use advanced data and information services, such as video calls.

Menu functions72Phone lock(Menu 9.8.1) Use this menu to protect the phone from unauthorised use. When this feature is enabled, you must enter a 4- to 8-digit phone password each time the phone is switched on.The password is preset to 00000000. To change the password, use the Change phone password menu.SIM lock(Menu 9.8.2)This menu allows your phone to work only with the current USIM/SIM by assigning a USIM/SIM lock code. You must enter the USIM/SIM lock code to use a different USIM/SIM card.PIN lock(Menu 9.8.3)The 4- to 8-digit PIN (Personal Identification Number) protects your USIM/SIM card against unauthorised use. When this feature is enabled, the phone requires your PIN each time it is switched on.Fixed dialling mode(Menu 9.8.4) If supported by your USIM/SIM card, Fixed Dialling Number (FDN) mode restricts your outgoing calls to a limited set of phone numbers. When this feature is enabled, you can make calls only to phone numbers stored on the USIM/SIM card.Change phone password(Menu 9.8.5)Use this menu to change your phone password. Privacy lock(Menu 9.8.6)Use this menu to lock access to messages, media files, call records, or Contacts entries. When a lock option is enabled, you must enter the phone password to access the locked items. Change PIN code(Menu 9.8.7)Use this menu to change your PIN. The PIN check feature must be enabled to change the PIN.Change PIN2 code(Menu 9.8.8)If supported by your USIM/SIM card, use this menu to change your current PIN2. Memory status(Menu 9.9) Use this menu to check the amount of memory being used for storing data, such as SMS, MMS, Email, Push messages, File manager, Contacts, and Organiser items. You can also view the amount of shared memory.Reset settings(Menu 9.0) Use this menu to reset the phone’s settings you have changed and clear all data you have added.1. Enter the phone password and press <Confirm>.2. Press <Yes>. The phone automatically turns itself off and then back on.The password is preset to 00000000. You can change this password.p. 72

73Solve problemsHelp and personal needsTo save the time and expense of an unnecessary service call, perform the simple checks in this section before contacting a service professional.When you switch on your phone, the following messages may appear:“Please insert SIM card”• Be sure that the SIM card is correctly installed.“Phone lock”• The automatic locking function has been enabled. You must enter the phone’s password before you can use the phone.“Enter PIN”• You are using your phone for the first time. You must enter the PIN supplied with the SIM card.• The PIN Check feature is enabled. Every time the phone is switched on, the PIN has to be entered. To disable this feature, use the PIN lock menu.“Enter PUK”• The PIN code was entered incorrectly three times in succession, and the phone is now blocked. Enter the PUK supplied by your service provider.“No service,” “Network failure,” or “Not done” displays• The network connection has been lost. You may be in a weak signal area. Move and try again.• You are trying to access an option for which you have no subscription with your service provider. Contact the service provider for further details.You have entered a number but it was not dialled• Be sure that you have pressed [ ].• Be sure that you have accessed the right cellular network.• Be sure that you have not set an outgoing call barring option.Your correspondent cannot reach you• Be sure that your phone is switched on. ([ ] pressed for more than one second.) • Be sure that you are accessing the correct cellular network.• Be sure that you have not set an incoming call barring option.Your correspondent cannot hear you speaking• Be sure that you have switched on the microphone.• Be sure that you are holding the phone close enough to your mouth. The microphone is located at the bottom of the phone.

74The phone starts beeping and “Low battery” flashes on the display• Your battery is insufficiently charged. Recharge the battery.The audio quality of the call is poor• Check the signal strength indicator on the display ( ). The number of bars indicates the signal strength from strong ( ) to weak ( ).• Try moving the phone slightly or moving closer to a window if you are in a building.No number is dialled when you re-call a Contacts entry• Use the Contacts Search feature to ensure the number has been stored correctly.• Re-store the number, if necessary.If the above guidelines do not help you to solve the problem, take note of:• The model and serial numbers of your phone•Your warranty details• A clear description of the problemThen contact your local dealer or Samsung after-sales service.Health and safety informationExposure to Radio Frequency (RF) SignalsCertification Information (SAR)Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. government. These FCC exposure limits are derived from the recommendations of two expert organizations, the National Counsel on Radiation Protection and Measurement (NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases, the recommendations were developed by scientific and engineering experts drawn from industry, government, and academia after extensive reviews of the scientific literature related to the biological effects of RF energy.The exposure limit set by the FCC for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of the rate of absorption of RF energy by the human body expressed in units of watts per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates a substantial margin of safety to

75Health and safety information give additional protection to the public and to account for any variations in measurements.SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.Before a new model phone is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit estabilished by the FCC. Tests are performed in positions and locations(e.g. at the ear and worn on the body) as required by the FCC.The highest SAR values for this model phone as reported to the FCC are Head: 0.328 W/Kg, Body-worn: 0.512 W/Kg. For body worn operation, this model phone has been tested and meets the FCC RF exposure guidelines when used with a Samsung accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum or 1.5cm from the body.Non-compliance with the above restrictions may result in violation of FCC RF esposure guidelines.SAR information on this and other model phones can be viewed on-line at www.fcc.gov/oet/fccid. This site uses the phone FCC ID number, A3LSGHZ540. Sometimes it may be necessary to remove the battery pack to find the number. Once you have the FCC ID number for a particular phone, follow the instructions on the website and it should provide values for typical or maximum SAR for a particular phone. Additional product specific SAR information can also be obtained at www.fcc.gov/cgb/sar.

Health and safety information76Consumer Information on Wireless PhonesThe U.S. Food and Drug Administration (FDA) has published a series of Questions and Answers for consumers relating to radio frequency (RF) exposure from wireless phones. The FDA publication includes the following information:What kinds of phones are the subject of this update?The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called “cell,” “mobile,” or “PCS” phones. These types of wireless phones can expose the user to measurable radio frequency energy (RF) because of the short distance between the phone and the user's head. These RF exposures are limited by Federal Communications Commission safety guidelines that were developed with the advice of FDA and other federal health and safety agencies. When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a person's RF exposure decreases rapidly with increasing distance from the source. The so-called “cordless phones,” which have a base unit connected to the telephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures well within the FCC's compliance limits.Do wireless phones pose a health hazard?The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radio frequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.

77Health and safety information What is FDA's role concerning the safety of wireless phones?Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radio frequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:• “Support needed research into possible biological effects of RF of the type emitted by wireless phones;• “Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and• “Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health.FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:• “National Institute for Occupational Safety and Health• “Environmental Protection Agency• “Federal Communications Commission• “Occupational Safety and Health Administration• “National Telecommunications and Information AdministrationThe National Institutes of Health participates in some interagency working group activities, as well.FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones.FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the primary subject of the safety questions discussed in this document.

Health and safety information78What are the results of the research done already?The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of radio frequency energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to be pre-disposed to develop cancer in absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we don't know with certainty what the results of such studies mean for human health.Three large epidemiology studies have been published since December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phones RF exposures. However, none of the studies can answer questions about long-term exposures, since the average period of phone use in these studies was around three years.What research is needed to decide whether RF exposure from wireless phones poses a health risk?A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but ten or more years' follow-up may be needed to provide answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop - if they do - may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this measurement, such as the angle at which the phone is held, or which model of phone is used.

79Health and safety information What is FDA doing to find out more about the possible health effects of wireless phone RF?FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radio frequency energy (RF).FDA has been a leading participant in the World Health Organization international Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues.FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world.What steps can I take to reduce my exposure to radio frequency energy from my wireless phone?If there is a risk from these products - and at this point we do not know that there is - it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radio frequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure.• “If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna.Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use.What about children using wireless phones?The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower

Health and safety information80exposure to radio frequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure.Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists. Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort. These systems reduce the absorption of RF energy in the head because the phone, which is the source of the RF emissions, will not be placed against the head. On the other hand, if the phone is mounted against the waist or other part of the body during use, then that part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements regardless of whether they are used against the head or against the body. Either configuration should result in compliance with the safety limit.Do wireless phone accessories that claim to shield the head from RF radiation work?Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone. Studies have shown that these products generally do not work as advertised. Unlike “hand-free” kits, these so-called “shields” may interfere with proper operation of the phone. The phone may be forced to boost its power to compensate, leading to an increase in RF absorption. In February 2002, the Federal trade Commission (FTC) charged two companies that sold devices that claimed to protect wireless phone users from radiation with making false and unsubstantiated claims. According to FTC, these defendants lacked a reasonable basis to substantiate their claim.

81Health and safety information What about wireless phone interference with medical equipment?Radio frequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. FDA has tested wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a compatible phone and a compatible hearing aid at the same time. This standard was approved by the IEEE in 2000.FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the problem.Additional information on the safety of RF exposures from various sources can be obtained from the following organizations:• FCC RF Safety Program:http://www.fcc.gov/oet/rfsafety/• Environmental Protection Agency (EPA):http://www.epa.gov/radiation/• Occupational Safety and Health Administration's (OSHA): http://www.osha.gov/SLTC/radiofrequencyradiation/index.html• National institute for Occupational Safety and Health (NIOSH):http://www.cdc.gov/niosh/emfpg.html • World health Organization (WHO):http://www.who.int/peh-emf/• International Commission on Non-Ionizing Radiation Protection:http://www.icnirp.de• National Radiation Protection Board (UK):http://www.nrpb.org.uk• Updated 4/3/2002: US food and Drug Administrationhttp://www.fda.gov/cellphones

Health and safety information82Road SafetyYour wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold.When driving a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips:1. Get to know your wireless phone and its features, such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.2. When available, use a hands-free device. If possible, add an additional layer of convenience and safety to your wireless phone with one of the many hands free accessories available today.3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voice mail answer it for you.4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice and even heavy traffic can be hazardous.5. Do not take notes or look up phone numbers while driving. Jotting down a “to do” list or flipping through your address book takes attention away from your primary responsibility, driving safely.6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.

83Health and safety information 7. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road.8. Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone!9. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.10.Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency number.“The wireless industry reminds you to use your phone safely when driving.”For more information, please call 1-888-901-SAFE, or visit our web-site www.wow-com.comProvided by the Cellular Telecommunications & Internet AssociationOperating EnvironmentRemember to follow any special regulations in force in any area and always switch your phone off whenever it is forbidden to use it, or when it may cause interference or danger. When connecting the phone or any accessory to another device, read its user's guide for detailed safety instructions. Do not connect incompatible products.As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder).Using Your Phone Near Other Electronic DevicesMost modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Consult the manufacturer to discuss alternatives.PacemakersPacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches) be maintained between a wireless phone and a

Health and safety information84pacemaker to avoid potential interference with the pacemaker.These recommendations are consistent with the independent research and recommendations of Wireless Technology Research.Persons with pacemakers:• should always keep the phone more than 15 cm (6 inches) from their pacemaker when the phone is switched on.• should not carry the phone in a breast pocket.• should use the ear opposite the pacemaker to minimize potential interference.If you have any reason to suspect that interference is taking place, switch your phone off immediately.Hearing AidsSome digital wireless phones may interfere with some hearing aids. In the event of such interference, you may wish to consult your hearing aid manufacturer to discuss alternatives.Other Medical DevicesIf you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Switch your phone off in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.Posted FacilitiesSwitch your phone off in any facility where posted notices require you to do so.Potentially Explosive EnvironmentsSwitch your phone off when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.Users are advised to switch the phone off while at a refueling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress.Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you

85Health and safety information would normally be advised to turn off your vehicle engine.Emergency CallsThis phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user programmed functions, which cannot guarantee connection in all conditions. Therefore, you should never rely solely on any wireless phone for essential communications (medical emergencies, for example).Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers.To make an emergency call:1. If the phone is not on, switch it on.2. Key in the emergency number for your present location (for example, 911 or other official emergency number). Emergency numbers vary by location.3. Press .If certain features are in use (call barring, for example), you may first need to deactivate those features before you can make an emergency call. Consult this document and your local cellular service provider.When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your phone may be the only means of communication at the scene of an accident; do not cut off the call until given permission to do so.Restricting Children's access to your PhoneYour phone is not a toy. Children should not be allowed to play with it because they could hurt themselves and others, damage the phone or make calls that increase your phone bill.FCC Notice and CautionsFCC NoticeThe phone may cause TV or radio interference if used in close proximity to receiving equipment. The FCC can require you to stop using the phone if such interference cannot be eliminated.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Health and safety information86Vehicles using liquefied petroleum gas (such as propane or butane) must comply with the National Fire Protection Standard (NFPA-58). For a copy of this standard, contact the National Fire Protection Association, One Battery march Park, Quincy, MA 02269, Attn: Publication Sales Division.CautionsChanges or modifications made in the radio phone, not expressly approved by Samsung, will void the user’s authority to operate the equipment.Only use approved batteries, antennas and chargers. The use of any unauthorized accessories may be dangerous and void the phone warranty if said accessories cause damage or a defect to the phone.Although your phone is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting, bending or sitting on it.Other Important Safety Information• Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device.• Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.• Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories.• For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If wireless equipment is improperly installed and the air bag inflates, serious injury could result.• Switch your phone off before boarding an aircraft. The use of wireless phone in aircraft is illegal and may be dangerous to the aircraft's operation.• Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both.

87Health and safety information Product PerformanceGetting the Most Out of Your Signal ReceptionThe quality of each call you make or receive depends on the signal strength in your area. Your phone informs you of the current signal strength by displaying a number of bars next to the signal strength icon. The more bars displayed, the stronger the signal.If you're inside a building, being near a window may give you better reception.Understanding the Power Save FeatureIf your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated. If your phone is active, it periodically rechecks service availability or you can check it yourself by pressing any key.Anytime the Power Save feature is activated, a message displays on the screen. When a signal is found, your phone returns to standby mode.Understanding How Your Phone OperatesYour phone is basically a radio transmitter and receiver. When it's turned on, it receives and transmits radio frequency (RF) signals. When you use your phone, the system handling your call controls the power level. This power can range from 0.006 watts to 0.2 watts in digital mode.Maintaining Your Phone's Peak PerformanceFor the best care of your phone, only authorized personnel should service your phone and accessories. Faulty service may void the warranty.There are several simple guidelines to operating your phone properly and maintaining safe, satisfactory service.• Hold the phone with the antenna raised, fully-extended and over your shoulder.• Try not to hold, bend or twist the phone's antenna.• Don't use the phone if the antenna is damaged.• Speak directly into the phone's receiver.• Avoid exposing your phone and accessories to rain or liquid spills. If your phone does get wet, immediately turn the power off and remove the battery. If it is inoperable, call Customer Care for service.

Health and safety information88Availability of Various Features/Ring TonesMany services and features are network dependent and may require additional subscription and/or usage charges. Not all features are available for purchase or use in all areas. Downloadable Ring Tones may be available at an additional cost. Other conditions and restrictions may apply. See your service provider for additional information.Battery Standby and Talk TimeStandby and talk times will vary depending on phone usage patterns and conditions. Battery power consumption depends on factors such as network configuration, signal strength, operating temperature, features selected, frequency of calls, and voice, data, and other application usage patterns. Battery Precautions• Never use any charger or battery that is damaged in any way.• Use the battery only for its intended purpose.• If you use the phone near the network's base station, it uses less power; talk and standby time are greatly affected by the signal strength on the cellular network and the parameters set by the network operator.• Battery charging time depends on the remaining battery charge and the type of battery and charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery.• If left unused, a fully charged battery will discharge itself over time.• Use only Samsung-approved batteries and recharge your battery only with Samsung-approved chargers. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its life.• Extreme temperatures will affect the charging capacity of your battery: it may require cooling or warming first.• Do not leave the battery in hot or cold places, such as in a car in summer or winter conditions, as you will reduce the capacity and lifetime of the battery. Always try to keep the battery at room temperature. A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Li-ion batteries are particularly affected by temperatures below 0 °C (32 °F).

89Health and safety information • Do not short-circuit the battery. Accidental short- circuiting can occur when a metallic object (coin, clip or pen) causes a direct connection between the + and - terminals of the battery (metal strips on the battery), for example when you carry a spare battery in a pocket or bag. Short-circuiting the terminals may damage the battery or the object causing the short-circuiting.• Dispose of used batteries in accordance with local regulations. In some areas, the disposal of batteries in household or business trash may be prohibited. For safe disposal options for Li-Ion batteries, contact your nearest Samsung authorized service center. Always recycle. Do not dispose of batteries in a fire.Care and MaintenanceYour phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfill any warranty obligations and allow you to enjoy this product for many years.• Keep the phone and all its parts and accessories out of the reach of small children.• Keep the phone dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits.• Do not use the phone with a wet hand. Doing so may cause an electric shock to you or damage to the phone.• Do not use or store the phone in dusty, dirty areas, as its moving parts may be damaged.• Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside the phone, which may damage the phone's electronic circuit boards.• Do not drop, knock or shake the phone. Rough handling can break internal circuit boards.• Do not use harsh chemicals, cleaning solvents or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water solution.• Do not paint the phone. Paint can clog the device's moving parts and prevent proper operation.• Do not put the phone in or on heating devices, such as a microwave oven, a stove or a radiator. The phone may explode when overheated.• When the phone or battery gets wet, the label indicating water damage inside the phone changes color. In this case, phone repairs are no longer guaranteed by the manufacturer's warranty, even if the warranty for your phone has not expired.

Health and safety information90• If your phone has a flash or light, do not use it too close to the eyes of people or animals. This may cause damage to their eyes.• Use only the supplied or an approved replacement antenna. Unauthorized antennas or modified accessories may damage the phone and violate regulations governing radio devices.• If the phone, battery, charger or any accessory is not working properly, take it to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service.•

91IndexAABC mode, text input • 22Active folder • 64Alarm • 55Answeringcall • 23, 25second call • 24Anykey answer • 64Auto redial • 67BBackground image • 65Backlight time, set • 65Barring, calls • 66Batterycharging • 7low indicator • 8precautions • 75Bluetoothreceiving, data • 69sending, data • 69settings • 68Broadcast 49Broadcast messages • 45, 49Browser, web • 36CCalculator • 35Calendar • 55Call costs • 27Call logdialled • 27missed • 26received • 27Call time • 28Caller groups • 30Caller ID • 66Calls answering • 23, 25barring • 66diverting • 66holding • 24making • 23redialling • 23rejecting • 23transferring • 25waiting • 67Cameraphotos • 59videos • 61CB (Cell Broadcast) messages • 45, 49Characters, enter • 21Configuration messages • 42Connect tone • 63Contactsadding • 29deleting • 29editing • 28, 29finding • 28options • 28speed-dialling • 30Conversion • 36Creating messagese-mail • 40MMS with attachments • 40MMS • 39SMS • 38CUG (Closed User Groups) • 67DDate, set • 64Deletingcall log • 27contacts • 29e-mail • 44, 46MMS • 42, 46SMS • 42, 46Dialled calls • 27Displaybacklight, set • 65brightness • 65icons • 10language • 64layout • 10settings • 65Diverting, calls • 66DRM (Digital Rights Management) • 50DTMF tones, send • 25EE-mailscreating/sending • 40deleting • 44settings • 48viewing • 43Emergency calls • 78FFDN (Fixed Dialling Number) mode • 72File manager • 50File messenger • 40Folder tone • 63GGames • 54Greeting message • 65

92IndexHHealth and safety • 74Holding, call • 24IIcons, description • 10Images, downloaded • 50Inbox, messagese-mail • 43SMS/MMS • 41International calls • 23Internet • 36JJava applications • 54Kkey tone volume • 63Keypad tonesselecting • 63sending/muting • 25volume • 63LLanguage, select • 64Last number, redial • 23Lockingmedia contents • 72phone • 72SIM card • 72Low battery indicator • 8MMemory statuscontacts • 31messages • 49phone • 72scheduled events • 58Message tone • 63Messagescell broadcast • 45configuration • 43e-mail • 43greeting • 65MMS with attachments • 40MMS • 39, 42push • 42SMS • 38, 41Minute minder • 63Missed alarm events • 58Missed calls • 26MMS messagescreating/sending • 39, 40deleting • 42settings • 46viewing • 42Multimediafiles • 50player • 32Multiparty-call • 25Music, downloaded • 52NName card • 31Namesentering • 21searching • 28Network selection • 69OOrganiser • 55Outbox, messages • 43PPasswordbarring • 66phone • 72Phonecare and maintenance • 79display • 10icons • 10locking • 72password • 72resetting • 72switching on/off • 8unpacking • 6Photosediting • 50taking • 59viewing • 50PIN, change • 72PIN2, change • 72Power on/off tone • 63Privacy • 72Problems, solve • 73Profiles • 63Push messages • 42, 49RReceived calls • 27Received messagese-mail • 43MMS/SMS • 41Recordingvideos • 61voice memos • 34Rediallingautomatically • 67manually • 23Resetting phone • 72Ringerincoming calls • 63messages • 63

93Index Road safety • 76Roaming • 69SSafetyinformation • 74precaution • 1Security calls • 72Sent messages • 43Shortcuts • 64SIM cardinserting • 7locking • 72SMS messagescreating/sending • 38deleting • 42, 46settings • 46viewing • 41Sound settings • 63Sounds, downloaded • 53Speakerphone • 25Speed-dial • 30Switching on/offmicrophone • 25phone • 8TT9 mode, text input • 21Templates, message • 44Text, enter • 21Time, set • 64VVideo callsanswering • 25making • 25options • 26setting • 67Videosplaying • 51recording • 61Voice recorderplaying • 34recording • 34Voicemail server • 49WWaiting call • 67Wallpaper • 65Web browseraccess • 36bookmarks • 37World time • 35