Samsung Electronics Co SGHZ560 Single-Band PCS GSM/ EDGE Phone with Bluetooth User Manual C s and Settings Admi
Samsung Electronics Co Ltd Single-Band PCS GSM/ EDGE Phone with Bluetooth C s and Settings Admi
Users Manual
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-xxxxxA
English. 03/2006. Rev. 1.0
*
Depending on the software installed or your service provider or country, some of the descriptions
in this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear different from the
illustrations in this guide.
SGH-Z560
User’s Guide
Draft 01
2006.03.13
Version : Menutree
Z560XAFB3
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Use road safety at all times
Do not use a hand-held phone while driving.
Park the vehicle first.
Switch off the phone when refuelling
Do not use the phone at a refuelling point
(service station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference.
Using them in an aircraft is both illegal and
dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be
using equipment that could be sensitive to
external radio frequency energy. Follow any
regulations or rules in force.
Interference
All wireless phones may be subject to
interference, which could affect their
performance.
1
Important safety precautions
Be aware of special regulations
Meet any special regulations in force in any area and
always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency calls
Key in the emergency number for your present
location, then press .
Keep your phone away from small children
Keep the phone and all its parts, including
accessories, out of the reach of small children.
Accessories and batteries
Use only Samsung-approved batteries and
accessories, such as headsets and PC data cables
.
Use of any unauthorised accessories could damage
you or your phone and may be dangerous.
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see "Health
and safety information" on page 80.
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
At very high volume, prolonged listening to
a headset can damage your hearing.
2
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful
attention to the subsequent
information regarding safety or phone
features.
Indicates that you can get more
information on the referenced page.
→
Indicates that you need to press the
Navigation keys to scroll to the
specified option and then select it.
[
] Indicates a key on the phone. For
example,
[]
<
> Indicates a soft key, whose function is
displayed on the phone screen. For
example, <
Menu
.
>
•3G
Your phone is capable of operating
in a 3G environment, allowing
much greater data transfer speed,
video streaming, and video
conferencing.
Special
features of your phone
• Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
•Media player
Play media files on your phone. You
can enjoy high quality videos and
music.
• Multimedia Message Service (MMS)
Send and receive MMS messages with a
combination of text, images, and audio.
3
Special features of your phone
•Bluetooth
Send photos, images, videos, and
other personal data, and connect to
other devices using free, wireless
Bluetooth technology.
•Web browser
Access the wireless web to get
up-to-the-minute information and
a wide variety of media content.
• Get personal with photo caller
ID
See who’s calling you with their
very own photo displays.
• Name card
Create name cards with your
number and profile. Whenever
introducing yourself to others, use
this convenient electronic name
card.
•E-mail
Send and receive e-mails with images, video,
and audio attachments.
•Java
Enjoy Java
™
-based embedded
games and download new games.
• Organiser
Keep track of your daily, weekly,
and monthly schedule.
• Voice recorder
Record memos or sounds.
4
Contents
Unpack 6
Make sure you have each item
Your phone 6
Keys, features, and locations
Get started 7
First steps to operating your phone
Install and charge the phone.............................. 7
Power on or off ................................................ 8
Keys and display .............................................. 9
Access menu functions .................................... 11
Customise your phone..................................... 12
Make/Answer calls .......................................... 14
Step outside the phone 15
Begin with your camera, the media player, the web, and
other special features
Use the camera.............................................. 15
Play media files .............................................. 16
Browse the web.............................................. 16
Use Contacts ................................................. 17
Send messages .............................................. 18
View messages.............................................. 20
Use Bluetooth wireless.................................... 21
Switch applications......................................... 22
Use a memory card ........................................ 22
Enter text 24
ABC, T9, Number, and Symbol modes
Call functions 26
Advanced calling features
Menu functions 30
All menu options listed
Solve problems 79
Help and personal needs
Health and safety information 81
Index 86
5
1 Call log
p. 30
1 Missed calls
2 Dialled calls
3 Received calls
4 Current contacts
5 Delete all
6 Data calls
7 Calls cost
*
8 Calls time
p. 30
p. 30
p. 30
p. 30
p. 30
p. 31
p. 31
p. 31
2 Contacts
p. 32
1 Search contact
2 New contact
3 Groups
4 Speed dial
5 My name card
6 Copy all
7 Own number
8 Service number
*
9 Settings
0 Memory status
p. 32
p. 33
p. 34
p. 34
p. 34
p. 34
p. 35
p. 35
p. 35
p. 35
3 Applications
p. 35
1 Mobile TV
2 i Music Store
3 SAT
*
4 Media player
p. 35
p. 36
p. 36
p. 36
4 Internet
p. 38
1 Go to homepage
2 Enter URL
3 Favourites
4 History
5 Browser settings
6 Network settings
p. 38
p. 39
p. 39
p. 40
p. 40
p. 40
5 Messages
p. 40
1 Create new
2 Inbox
3 Drafts
4 Outbox
5 Sent box
6 Email inbox
7 Media Album
**
8 Templates
9 Broadcast
0 Delete all
* Settings
# Memory status
p. 40
p. 44
p. 46
p. 46
p. 46
p. 47
p. 47
p. 48
p. 48
p. 49
p. 49
p. 53
6 File manager
p. 53
Images
Videos
Music
Sounds
Games & More
Other files
Memory card
***
p. 53
p. 55
p. 56
p. 56
p. 57
p. 58
p. 58
7 Organiser
p. 58
1 Alarms
2 Calendar
3 Week view
4 Today’s events
5 Schedule
6 Anniversary
7 Task
8 Memo
9 Voice memo
0 World clock
* Math
# Memory status
? My screen
p. 58
p. 59
p. 61
p. 61
p. 61
p. 61
p. 61
p. 62
p. 62
p. 63
p. 63
p. 64
p. 64
8 Camera
p. 64
9 Settings
p. 68
1 Profiles
2 Time & date
3 Phone
4 Display
5 Call
6 Connectivity
7 Application settings
8 Security
9 Memory status
0 Reset settings
p. 68
p. 69
p. 70
p. 71
p. 71
p. 73
p. 77
p. 77
p. 78
p. 78
* Shows only if supported by your USIM/SIM
card.
** Shows only if supported by your service
provider.
*** Shows only if a memory card is inserted.
Overview of menu functions
To access Menu mode, press [
OK
] in Idle mode.
6
Unpack
Make sure you have each item
You can obtain various accessories
from your local Samsung dealer.
Phone Travel Adapter
Battery PC Data Cable
PC Link CD User’s Guide
The items supplied with your
phone and the accessories at
your Samsung dealer may vary,
depending on your country or
service provider.
Your phone
Keys, features, and locations
Navigation
keys
Dial key
Special
function keys
Volume keys
Left soft key
Application
switch key
Menu access/
confirm key
(OK)
Alphanumeric
keys Microphone
Earpiece
Main
display
Interior
camera lens
Video call key
Delete key
Power On/Off/
Menu exit key
Right soft key
Exterior
camera lens
Camera key
External
display
Music player
control keys
Memory card
slot
Headset jack/
charging socket
7
Get started
First steps to operating your phone
USIM/SIM card information
When you subscribe to a cellular network, you
receive a plug-in SIM (Subscriber Identity Module)
card loaded with your subscription details, such as
your PIN, and available optional services. For 3G
services, you can purchase a USIM (Universal
Subscriber Identity Module) card.
Install and charge the phone
Remove the battery
cover.
If the
phone is already
on, first turn it off by
pressing and holding
[].
Insert the USIM/SIM
card.
Make sure that the gold-
coloured contacts on the
card are face down.
Install the battery. Replace the battery
cover.
Plug the travel adapter into the phone.
Plug the adapter into a standard AC wall outlet.
When the phone is completely charged (the
battery icon becomes still), unplug the adapter
from the power outlet.
Get started
8
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the battery low message displays, and
• the empty battery icon blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
Power on or off
Remove the adapter from the phone.
Power on
Do not turn on the
phone when
mobile phone use
is prohibited.
1. Open the phone.
2. Press and hold [ ].
3. If necessary, enter the PIN
and press <
Confirm
>.
Power off
1. Open the phone.
2. Press and hold [ ].
9
Get started
Keys and display
Keys
Perform the function indicated on the
bottom line of the display.
In Idle mode, access menu options
directly.
p. 70
In Menu mode, scroll through the
menu options.
In Idle mode, access Menu mode.
In Menu mode, select a highlighted
menu option or confirm input.
Make a video call.
Make or answer a call.
In Idle mode, retrieve numbers
recently dialled, missed, or received.
Delete characters from the display or
an item in an application.
End a call.
Press and hold to switch the phone on
and off.
In Menu mode, cancel input and return
the phone to Idle mode.
Open the application switch window to
open
Call
,
Messages
, and
Internet
without exiting the current application.
Enter numbers, letters, and some
special characters.
In Idle mode, press and hold [
1
] to
access your voicemail. Press and hold
[
0
] to enter an international call prefix.
Enter special characters.
Press and hold [ ] to activate or
deactivate the Silent profile. Press and
hold [ ] to enter a pause between
numbers.
Adjust the phone volume.
In Idle mode, with the phone open,
adjust the keypad tone volume. With
the phone closed, press and hold to
turn on the display.
Press and hold to turn on the camera.
In Camera mode, switch the camera
lens.
Press and hold to launch or close the
music player.
Return to the previous file during
playback.
Skip to the next file during playback.
Get started
10
Display
Layout
The display has three areas.
Icons
*
Received signal strength
Accessing services in a 2.5G
network; when transferring
data, this icon animates.
Accessing services in a 3G
network; when transferring
data, this icon animates.
Roaming network
Voice call in progress
Out of your service area; you
cannot send or receive voice
calls
Text and graphics
displays messages,
instructions, and
information you enter.
Soft key function
indicators
shows the current
functions assigned to
the two soft keys.
Icons
displays various icons.
Msg. Contacts
Video call in progress
Out of your service area; you
cannot send or receive video
calls
Memory card inserted
Bluetooth active; When
transferring data, this icon
blinks red and blue.
p. 74
Connected with a computer
via a USB port
Browsing the Internet on a
PC using the phone as a
modem
Connected to a secured web
page
New message:
•: SMS
• : MMS
•: E-mail
•: Voicemail
•: WAP push
• : Configuration
message
11
Get started
Access menu functions
Inbox full:
•: SMS
•: MMS
•: E-mail
•: Voicemail
• : Configuration
message
Profile setting
p. 69
•: Normal
• : Meeting
•: Car
•: Silent
• : Outdoor
Battery power level
* Depending on your country or service provider, the icons
shown on the display may vary.
Use the soft
keys
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current
role.
Press the left soft
key to select the
highlighted option.
Press the right soft
key to return to
the previous menu
level.
Select
Back
Get started
12
Customise your phone
Select an
option
1. Press a desired soft key.
2. Press the Navigation keys to
move to the next or previous
option.
3. Press <
Select
> or [
OK
] to
confirm the function
displayed or option
highlighted.
4. To exit, choose either of the
following methods:
• Press <
Back
> to move
up one level.
• Press [ ] to return to
Idle mode.
Use shortcuts
Press the number key
corresponding to the option you
want.
1. In Idle mode, press [
OK
] and
select
Settings
→
Phone
→
Language
→
Screen text
.
2. Select a language.
3. Press <
Save
>.
You can change the call ringer by
changing the properties of the
currently active sound profile.
To change the profile properties:
1. In Idle mode, press [
OK
] and
select
Settings
→
Profiles
.
2. Scroll to the sound profile you
are using.
3. Press <
Options
> and select
Edit
.
4. Select
Voice call ringtone
and select a ringtone for
voice calls.
5. Select
Video call ringtone
and select a ringtone for
video calls.
6. Press <
Options
> and select
Save
.
Display
language
Call ringer
melody
13
Get started
To change the sound profile:
1. In Idle mode, press [
OK
] and
select
Settings
→
Profiles
.
2. Select the profile you want.
You can set a wallpaper for the
idle screen on each display.
For the main display:
1. In Idle mode, press [
OK
] and
select
Settings
→
Display
→
Wallpaper
.
2. Scroll to an image folder
.
3. Select an image.
For the external display:
1. In Idle mode, press [
OK
] and
select
Settings
→
Display
→
Cover LCD
.
2. Select an image type.
3. For
Clock
, scroll to a clock
type and press <
Save
>.
For
Cover title
, enter a
greeting and press <
Save
>.
Idle mode
Wallpaper
For
Wallpaper
, press
<
Change
> and select an
image. If necessary, select
the portion of the image to be
displayed and press [
OK
].
4. Press <
Change
>.
You can set the Navigation keys
to function as shortcuts to access
your favourite menus.
1. In Idle mode, press [
OK
] and
select
Settings
→
Phone
→
Shortcuts
.
2. Select a key.
3. Select a menu to be assigned
to the key.
You can quickly activate the
Silent profile to avoid disturbing
other people.
Press and hold [ ] in Idle mode.
Menu
shortcuts
Silent profile
Get started
14
Make/Answer calls
You can protect the phone
against unauthorised use with a
phone password. The phone will
require the password on power-
up.
1. In Idle mode, press [
OK
] and
select
Settings
→
Security
→
Change phone
password
.
2. Enter the default password,
00000000
, and press
<
Confirm
>.
3. Enter a new 4- to 8-digit
password and press
<
Confirm
>.
4. Enter the new password
again and press <
Confirm
>.
5. Select
Phone lock
.
6. Select
Enable
.
7. Enter the password and press
<
Confirm
>.
Phone lock
To make a voice call:
1. Enter an area code and
phone number.
2. Press [ ].
3. To end the call, press [ ].
To ma ke a v ide o cal l :
1. Enter an area code and
phone number.
2. Press [ ] and if the other
phone is compatible, the
other person appears on the
screen.
1. When the phone rings, press
[].
2. For a video call, press
<
Show me
> to allow the
other person to see you.
3. To end the call, press [ ].
Press [
/
].
Make a call
Answer a call
Adjust the
volume during
a call
15
Step outside the phone
Begin with your camera, the media player, the web, and
other special features
Use the camera
1. Open the phone.
2. In Idle mode, press and hold
[ ] to turn on the camera.
3. Press [ ] to switch between
the interior lens and exterior
lens.
4. Aim the lens at the subject
and make any desired
adjustments.
5. Press [
OK
] to take a photo.
The photo is saved
automatically.
6. Press [
OK
] to take another
photo.
1. In Idle mode, press [
OK
] and
select
File manager
→
Images
.
2. Select the photo you want
from the
Pictures
folder.
Take a photo
View a photo
1. In Idle mode, press and hold
[ ] to turn on the camera.
2. Press [
1
] to switch to Record
mode.
3. Press [ ] to switch between
the interior lens and exterior
lens.
4. Press [
OK
] to start recording.
5. Press [
OK
] to stop recording.
The video is automatically
saved.
6. Press [
OK
]
to record another
video.
1. In Idle mode, press [
OK
] and
select
File manager
→
Videos
.
2. Select the video you want
from the
Videos
folder.
Record a video
Play a video
Step outside the phone
16
Play media files
Browse the web
Using a built-in web browser, you can easily access
the wireless web to get a variety of up-to-date
services and information and to download web
content.
Use these methods:
• Download from the wireless
web
p. 38
• Download from a computer
using the optional Samsung
PC Studio
Samsung PC
Studio User’s Guide
• Receive via Bluetooth
p. 73
• Copy to a memory card and
insert the card into the phone
p. 23
1. In Idle mode, press [
OK
] and
select
Applications
→
Media
player
.
2. Press [
OK
].
3. Press <
Options
> and select
Add
→
Folder
or
Files
.
4. Scroll to the folder you want,
or press [
OK
] to select the
files you want.
5. Press <
Select
> or <
Add
>.
Copy media
files to the
phone
Create a play
list
1. From the play list screen,
press [
OK
].
2. During playback, use the
following keys:
• OK: pauses or resumes
playback.
• Up: opens the play list.
• Left: returns to the
previous file. Moves
backward in a file when
held down.
• Right: skips to the next
file. Skips forward in a file
when held down.
•
/
: adjusts the volume.
3. Press [Down] to stop
playback.
In Idle mode, press [
OK
] and
select
Internet
→
Go to
homepage
.
Play media files
Launch the
browser
17
Step outside the phone
Use Contacts
• To scroll through browser
items, press [Up] or [Down].
•To select an item, press
<
Select
> or [
OK
].
• To return to the previous
page, press <
Back
> or [
C
].
• To use browser options, press
<
Options
>.
To the phone’s memory:
1. In Idle mode, enter a phone
number.
2. Press <
Options
> and select
Save to Contacts
→
Phone
→
New
→
a number type.
3. Specify the contact
information: First name, Last
name, Phone number, Work
Email, Home Email, Group,
Homepage, Birthday, and
More information (Job title,
Department, Company,
Nickname, and Notes).
4. Press <
Options
> and select
Save
to save the contact.
Navigate the
web
Add a contact
To the USIM/SIM card:
1. In Idle mode, enter a phone
number.
2. Press <
Options
> and select
Save to Contacts
→
SIM
→
New
.
3. Specify the contact
information: Name, Phone
number, Group (for USIM),
and Location number.
4. Press <
Save
> to save the
contact.
1. In Idle mode, press
<
Contacts
>.
2. Enter the first few letters of
the name you want.
3. Select an entry.
4. Select a number, and press
[] to dial or [
OK
] to edit
contact information.
Find a contact
Step outside the phone
18
Send messages
1. In Idle mode, press [
OK
] and
select
Contacts
→
My name
card
.
2. Specify your contact
information.
3. Press <
Options
> and select
Save
to save the name card.
4. To send the name card,
access
My name card
again.
5. Press <
Options
> and select
Send
name card
→
a
sending method.
1. In Idle mode, press <
Msg.
>
and select
Create new
→
Text message
.
2. Enter the message text and
press [
OK
].
3. Enter destination numbers.
4. Press [
OK
] to send the
message.
Create and
send a name
card
Send a text
message (SMS)
1. In Idle mode, press <
Msg.
>
and select
Create new
→
Multimedia message
.
2. Enter the message subject.
3. Select
Text
.
4. Enter the message text and
press [
OK
].
5. Select
Picture or Video
or
Audio
.
6. Add an image, video clip, or
sound clip.
7. Press <
Options
> and select
Send
.
8. Enter destination numbers or
e-mail addresses.
9. Press [
OK
] to send the
message.
Send a
multimedia
message
(MMS)
19
Step outside the phone
1. In Idle mode, press <
Msg.
>
and select
Create new
→
File messenger
.
2. Enter the message subject.
3. Move to the
Message
field.
4. Enter the message text.
5. Move to the
Attach files
line.
6. Press <
Options
> and select
Add files
,
Add name card
,
or
Add v-calendar
.
7. Select images, videos,
sounds, name cards,
schedule items, or tasks.
8. Press <
Options
> and select
Attach
.
9. Press [
OK
].
10. Enter destination numbers or
e-mail addresses.
11. Press [
OK
] to send the
message.
Send files by
MMS
You can create and send a photo
postcard. The service agency will
print it as an actual postcard and
deliver it to the destination.
1. In Idle mode, press <
Menu
>
and select
Messages
→
Create new
→
TIMClick
→
Postcard
.
2. Select
Greeting msg.
.
3. Enter the message text and
press [
OK
].
4. Select
Picture
.
5. Select the photo you want to
send and press <
Add
>.
6. When you have finished,
press [
OK
].
7. Specify the recipient’s postal
address: Name, Additional
information, Street, ZIP, City,
and Country.
8. Press [
OK
] to send the
postcard.
Send a
postcard
Step outside the phone
20
View messages
1. In Idle mode, press <
Msg.
>
and select
Create new
→
Email
.
2. Enter the e-mail subject.
3. Move to the
Message
field
and enter the e-mail text.
4. Move to the
Attach files
line.
5. Press <
Options
> and select
Add files
,
Add name card
,
or
Add v-calendar
.
6. Select images, videos,
sounds, name cards,
schedule items, or tasks.
7. Press <
Options
> and select
Attach
.
8. Press [
OK
].
9. Enter e-mail addresses.
10. Press [
OK
] to send the
e-mail.
Send an e-mail
When a notification appears:
1. Press <
View
>.
2. Select the message from the
Inbox.
From the Inbox:
1. In Idle mode, press <
Msg.
>
and select
Inbox
.
2. Select a text message ( ).
When a notification appears:
1. Press <
View
>.
2. Press <
Options
> and select
Retrieve
.
3. Select the message from the
Inbox.
From the Inbox:
1. In Idle mode, press <
Msg.
>
and select
Inbox
.
2. Select an MMS message
().
View a text
message
View a
multimedia
message
21
Step outside the phone
Use Bluetooth wireless
Your phone is equipped with Bluetooth technology,
enabling you to connect the phone wirelessly to
other Bluetooth devices and exchange data with
them, talk hands-free, or control the phone
remotely.
1. In Idle mode, press <
Msg.
>
and select
Email inbox
.
2. Press <
Options
> and select
Download
to download new
e-mails or headers.
3. Select an e-mail or header.
4. If you selected a header,
press <
Options
> and select
Retrieve
to view the body of
the e-mail.
1. In Idle mode, press [
OK
]
and
select
Settings
→
Connectivity
→
Bluetooth
→
Activation
→
On
.
2. Select
My phone’s visibility
→
On
to allow other devices
to find your phone.
View an e-mail
Turn on
Bluetooth
1. In Idle mode, press [
OK
]
and
select
Settings
→
Connectivity
→
Bluetooth
→
My devices
→
Search
new device
.
2. Select a device.
3. Enter a Bluetooth PIN or the
other device’s Bluetooth PIN,
if it has one, and press
<
OK
>.
When the owner of the other
device enters the same code,
the pairing is complete.
1. Access an application,
Contacts
,
File manager
,
Calendar
,
Schedule
, or
Task
.
2. Select an item.
3. Press <
Options
> and select
Send name card
/
Send
/
Send schedule
/
Send task
→
Via bluetooth
.
4. Select a device.
5. If necessary, enter the
Bluetooth PIN and press
<
OK
>.
Search for and
pair with a
Bluetooth
device
Send data
Step outside the phone
22
Switch applications
You can switch to other applications from a menu,
without closing the menu screen you were using.
Use a memory card
You can use an optional microSD memory card to
increase your phone’s memory capacity.
To receive data via Bluetooth,
your phone’s Bluetooth feature
must be active and its visibility
must be enabled.
If necessary, press <
Yes
> to
confirm that you are willing to
receive.
1. While using a menu, press
[]
.
2. Select an application.
•
Call
: opens the dialling
screen.
•
Messages
: accesses the
Messages
menu.
•
Internet
: launches the web
browser.
1. Press
[]
.
2. Scroll to
End all?
.
3. Press <
Yes
>.
Receive data
Switch to an
application
Available
applications
Close all
running
applications
• Frequent erasing and writing
will shorten a card’s lifespan.
• Do not remove a card from the
phone or turn off the phone
while data is being accessed or
transferred. This could result
in loss of data and/or damage
to the card or phone.
• Do not subject cards to strong
shocks.
• Do not touch card terminals
with your fingers or metal
objects. If dirty, wipe the card
with a soft cloth.
• Keep cards away from small
children or pets.
• Do not expose cards in a place
subject to electro static
discharge and/or electrical
noise.
Important
memory card
information
23
Step outside the phone
1. Slide a memory card into the
card slot, with the label side
face up.
2. Press the card until it locks
into place.
Using a card adapter and a USB
card reader/writer, you can read
the card on a PC.
1. Insert a memory card into a
card adapter, and then the
adapter into a card reader/
writer.
2. Plug the USB connecter of the
card reader/writer into the
USB port on your PC.
3. Access the appropriate
memory disk and copy to and
from the card.
Insert a
memory card
Use a card
adapter
24
Enter text
ABC, T9, Number, and Symbol modes
You can enter text in some features such as
Messages, Contacts, or Organiser, using ABC mode,
T9 mode, Number mode, and Symbol mode.
Changing the text input mode
The text input mode indicator displays when the
cursor is in a text input field.
• Press and hold [ ] to switch between T9 ( )
and ABC ( ) modes.
• Press [ ] to change case or to switch to Number
mode ( ).
• Press and hold [ ] to switch to Symbol mode
().
Using T9 mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
Entering a word in T9 mode
1. Press [
2
] to [
9
] to start entering a word. Press
each key once for each letter.
For example, press [
4
], [
3
], [
5
], [
5
], and [
6
] to
enter Hello in T9 mode.
T9 predicts the word that you are typing, and it
may change with each key that you press.
2. Enter the whole word before editing or deleting
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [
0
] to display alternative word
choices for the keys that you have pressed.
For example, Of and Me use [
6
] and [
3
].
4. Press [ ] to insert a space and enter the next
word.
Other T9 mode operations
• Press [
1
] to enter periods or apostrophes
automatically.
• Press the Navigation keys to move the cursor.
• Press [
C
] to delete characters one by one. Press
and hold [
C
] to clear the entire display.
Adding a new word to the T9 dictionary
This feature may not be available for some
languages.
1. Enter the word that you want to add.
2. Press [
0
] to display alternative words for your
key presses. When there are no more alternative
words,
Spell
displays on the bottom line.
3. Press <
Spell
>.
4. Enter the word you want using ABC mode and
press <
Add
>.
25
Enter text
Using ABC mode
Press the appropriate key until the character you
want appears on the screen.
(Creating an SMS message with GSM alphabet encoding)
Other ABC mode operations
• To enter the same letter twice or to enter a
different letter on the same key, wait for the
cursor to move to the right automatically or
press [Right]. Then, enter the next letter.
• Press [ ] to insert a space.
• Press the Navigation keys to move the cursor.
•Press [
C
] to delete characters one by one. Press
and hold [
C
] to clear the entire display.
Using Number mode
Number mode enables you to enter numbers. Press
the keys corresponding to the digits you want.
Using Symbol mode
Symbol mode enables you to insert symbols.
Upper case Lower case
Key Characters in order displayed
To Press
display more symbols [Up] or [Down].
select a symbol the corresponding
number key.
clear the symbol(s) [
C
].
insert the symbol(s) <
OK
>.
26
Call functions
Advanced calling features
Making a call
1. In Idle mode, enter the area code and phone
number.
2. Press [ ].
3. When you want to end the call, press [
].
Making an international call
1. In Idle mode, press and hold [
0
]. The
+
character appears.
2. Enter the country code, area code, and phone
number, then press [ ].
Redialling recent numbers
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press [ ].
Making a call from Contacts
Once you have stored a number in Contacts, you can
dial the number by selecting it from Contacts.
p. 32
You can also use the speed dial feature to assign
your most frequently called numbers to specific
number keys.
p. 34
You can quickly dial a number from the USIM/SIM
card using its location number assigned when
stored.
1. In Idle mode, enter the location number for the
phone number you want and press [ ].
2. Scroll through other numbers, if necessary.
3. Press <
Call
> or [ ] to make a voice call, or
<
V-Call
> to make a video call.
Answering a call
When you receive an incoming call, the phone rings
and displays the incoming call image.
Press <
Accept
> or [ ] to answer the call.
Tips for answering a call
• When
Anykey
answer
is active, you can press
any key, except for <
Reject
> and [ ].
p. 70
• When
Active folder
is active, you can answer a
call by opening the phone.
p. 70
• Press <
Reject
> or [ ] to reject a call.
• Press [
C
] to clear the last digit or press and
hold [
C
] to clear the whole display. You can
move the cursor to edit an incorrect digit.
• Press and hold [ ] to enter a pause
between numbers.
27
Call functions
• Press and hold [
/
] to reject a call or mute the
ringer, depending on the
Volume key
setting.
p. 70
Viewing missed calls
If you have missed calls, the screen displays how
many calls you have missed.
1. Press <
View
>.
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
Using the headset
Use the headset to make or answer calls without
holding the phone.
Connect the headset to the jack on the left side of
the phone. The button on the headset works as
follows:
Options during a call
You can access a number of functions during a call.
Adjusting the volume during a call
Use [
/
] to adjust the earpiece volume during a
call.
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
Placing a call on hold/Retrieving
Press <
Hold
> or <
Unhold
> to place a call on hold
or retrieve the call.
Making a second call
You can make another call if your network supports
this function.
1. Press <
Hold
> to put the call on hold.
2. Make the second call in the normal way.
3. Press <
Swap
> to switch between the calls.
4. Press <
Options
> and select
Drop
→
Drop
held
call
to end the call on hold.
5. To end the current call, press [ ].
Answering a second call
You can answer an incoming call while already on
the phone, if your network supports this function
and you have activated the call waiting feature.
p. 72
1. Press [ ] to answer the call. The first call is
automatically put on hold.
To Press
redial the last call the button twice.
answer a call the button.
end a call and hold the button.
Call functions
28
2. Press <
Swap
> to switch between the calls.
3. Press <
Options
> and select
Drop
→
Drop
held
call
to end the call on hold.
4. To end the current call, press [ ].
Using the speakerphone feature
Use the phone as a speakerphone to talk and listen
with the phone a short distance away.
Press [
OK
] and then <
Yes
> to activate the
speakerphone feature. Press [
OK
] again to switch
back to the earpiece.
Using In-call options
Press <
Options
> to access the following options
during a call:
•
Loudspeaker
/
Loudspeaker off
: turn on the
Speakerphone feature or switch back to Normal
mode.
•
Switch to headset
/
Switch to phone
: switch
the call to a Bluetooth headset or hands-free car
kit or back to the phone.
p. 74
•
Join
: set up a multi-party call by adding a caller
on hold to a currently active call. You can include
up to 5 people on a multi-party call.
•
Split
: have a private conversation with one
multi-party call participant. The other
participants can converse with each other. After
the private conversation, select
Join
to return
both all private participants to the multi-party
call.
•
Drop
: disconnect the call currently on hold or
active call.
•
Drop call
: disconnect one multi-party call
participant.
•
Transfer
: transfer the currently active call to a
caller on hold. The two callers can talk to each
other, but you are disconnected from the call.
•
Mute
/
Unmute
: switch off the phone's
microphone so that the other person on the
phone cannot hear you, or switch it back on.
•
Mute key tone
/
Unmute key tone
: turn the
key tones off or on.
•
New call
: make a new voice call.
•
Contacts
: locate or store contacts in Contacts.
•
Send text message
: create a new SMS
message.
•
Send DTMF
: send DTMF (Dual tone multi-
frequency) tones as a group. The DTMF tones are
the tones used in phones for tone dialling,
sounding when you press the number keys. This
option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
•
Memo
: create a memo.
•
End call
/
End calls
: disconnect the call currently
on hold, active call, or all calls.
To communicate with answering machines or
computerised telephone systems,
Unmute
key tone
must be selected.
29
Call functions
Using the video call feature
In a 3G (UMTS) service area, your phone can make
or receive a video call, allowing you to see another
person on the screen during a conversation. The
other person’s phone must support the video call
feature.
Making a video call
1. In Idle mode, enter the area code and phone
number.
2. Press [ ] and if their phone is compatible, the
other person appears on the screen.
Answering a video call
When you receive a video call, answer as you would
when receiving a voice call. Press <
Show me
> to
allow the caller to see you.
Using video call options
During a video call, press <
Options
> to access the
following options:
•
Loudspeaker
/
Loudspeaker off
: turn on the
Speakerphone feature or switch back to Normal
mode.
•
Switch to headset
/
Switch to phone
: switch
the call to a Bluetooth headset or hands-free car
kit or back to the phone. To use this feature, you
first need to connect your headset to the
phone.
p. 74
•
Mute camera
/
Unmute camera
: turn off or on
the camera.
•
Mute voice
/
Unmute voice
: turn off or on the
microphone.
•
Mute camera & voice
/
All on
: turn off or on the
camera and the microphone.
•
Mute key tone
/
Unmute key tone
: turn off or
on the key tones.
•
Zoom
: display the zoom control bar and zoom in
or out by pressing [Up] or [Down].
•
Brightness
: display the brightness control bar
and adjust the brightness by pressing [Left] or
[Right].
•
Effects
: change the colour tone of the image.
•
Hide information
/
Show information
: hide or
display information about the video call.
•
Send DTMF
: send DTMF (Dual tone multi-
frequency) tones as a group after entering the
entire number you need to send or retrieving a
number from Contacts.
•
Video quality
: change the image quality of the
camera.
•
End call
: end the video call.
30
Menu functions
All menu options listed
Call log
(Menu 1)
Use this menu to view the calls you have dialled,
received, or missed, the length of the calls. You can
also check the cost of your calls, if your USIM/SIM
card supports this function.
To access this menu, press [
OK
] in Idle mode and
select
Call log
.
Missed calls
(Menu 1.1)
This menu displays the most recent calls you did not
answer.
Accessing a call log
1. Scroll to the name or number you want.
2. Press [ ] to dial the number, or [
OK
] to view
the details of a call.
Using call log options
From the call list, press <
Options
> to access the
following options:
•
Details
: access the call details.
•
Voice call
: make a voice call to the number.
•
Video call
: make a video call to the number, if
the 3G service is available.
•
Use number
: paste the selected number to the
normal dialling screen.
•
Save to Contacts
: save the number to
Contacts.
•
Send message
: send a message to the selected
number via SMS, MMS, or file messenger.
•
Delete
: delete the call log.
•
Delete all
: delete all logs.
Dialled calls
(Menu 1.2)
This menu displays the most recent calls you have
dialled.
Received calls
(Menu 1.3)
This menu displays the most recent calls you have
received.
Current contacts
(Menu 1.4)
This menu displays all of the calls you have dialled,
received, or missed.
Delete all
(Menu 1.5)
Use this menu to delete all logs in each call type.
1. Press [
OK
] to check the call types to clear.
2. Press <
Delete
>.
3. Press <
Yes
> to confirm the deletion.
4. If your phone is locked, enter the phone
password and press <
Confirm
>.
The password is preset to
00000000
. You
can change this password.
p. 78
31
Menu functions
Call log
(Menu 1)
Data calls
(Menu 1.6)
Use this menu to view the total amount of sent or
received data.
To reset a counter or all counters, press <
Options
>
and select
Reset
or
Reset all
.
Calls cost
(Menu 1.7)
This network feature displays the cost of calls. This
menu is available only if supported by your USIM/
SIM card. Note that this is not intended to be used
for billing purposes.
•
Total costs
:
check the total cost of all your
calls. If the total cost exceeds the maximum cost
set in
Edit cost limit
, you must reset the
counter before you make another call.
•
Last call cost
: check the cost of your last call.
•
Max cost
: check the maximum cost set.
Press <
Options
> to access the following options:
•
Reset call cost
: reset the cost counters.
•
Edit cost limit
: set the maximum cost
authorised for your calls.
•
Setup currency
: set the currency that is
applied when the cost of your call is calculated.
Calls time
(Menu 1.8)
This menu displays the time log for voice and video
calls made and received. The actual time invoiced by
your service provider will vary.
•
Total dialled
: check the total length of voice
calls dialled.
•
Total received
: check the total length of
voice calls received.
•
Total dialled
: check the total length of video
calls dialled.
•
Total received
: check the total length of
video calls received.
To reset a counter or all counters, press <
Options
>
and select
Reset
or
Reset all
.
If the phone is locked, it will require the phone
password. The password is preset to
00000000
.
You can change this password.
p. 78
If the phone is locked, it will require the phone
password. The password is preset to
00000000
.
You can change this password.
p. 78
Menu functions
32
Contacts
(Menu 2)
You can store phone numbers on your USIM/SIM
card and in your phone’s memory. The USIM/SIM
card and phone’s memory are physically separate,
but they are used as a single entity called Contacts.
To access this menu, press [
OK
] in Idle mode and
select
Contacts
.
Search contact
(Menu 2.1)
Use this menu to search for contacts in Contacts.
Finding a contact
1. Enter the first few letters of the name that you
want to find.
2. Select the name you want from the list.
3. Press [ ] to dial the number, or [
OK
] to edit
contact information.
Using contact options
While viewing contact details, press <
Options
> to
access the following options:
•
Edit
: edit contact information.
•
Send message
: send a message to the selected
number via SMS, MMS, file messenger, or e-mail.
•
Special options
: set the following options:
Picture
: assign a caller ID image to alert you to
a call from the number.
Ringtone
: assign a ringtone to alert you to a call
from the number.
Msg.
alert tone
: select a ringtone to alert you
to an incoming message from the number.
•
Add to speed dial
: set the selected number as
a speed dial entry.
•
Video call
: make a video call, if the 3G service
is available.
•
Copy to SIM
/
Copy to phone
: copy the contact
from the phone’s memory to the SIM card, or
vice versa.
•
Send name card
: send the contact via SMS,
e-mail, file messenger, or Bluetooth.
•
Use number
: paste the selected number to the
normal dialling screen.
•
Delete
: delete the contact.
While viewing the contact list, press <
Options
> to
access the following options:
•
Details
: access contact information.
•
Edit
: edit contact information.
•
Video call
: make a video call, if the 3G service
is available.
•
New
: add a new contact.
•
Delete
: delete the contact.
•
Search groups
: access the caller group list.
•
Service number
: access service numbers
preset by your service provider.
•
Delete all
: delete all contacts.
33
Menu functions
Contacts
(Menu 2)
New contact
(Menu 2.2)
Use this menu to add a new contact to Contacts.
Adding a contact to the phone’s memory
1. Select
Phone
.
2. Change the settings or enter information about
the contact:
•
First name
/
Last name
: assign a name.
•
Phone number
: add a phone number.
•
Work Email
: assign a business e-mail
address.
•
Home Email
: assign a personal e-mail
address.
•
Group
: assign a caller group.
•
Homepage
: enter a homepage address.
•
Birthday
: enter the person’s birthday.
•
More information
: enter the job title,
department, company, nickname, and
additional note of the person.
3. Press <
Options
> and access the following
options to add additional information:
•
Special options
: assign a caller ID image,
call ringer, or message ringer for the contact.
•
Add phone number
: add a number
category to the contact.
•
Delete phone number
: remove the
selected number category from the contact
entry.
•
Change type
: change the number type from
the contact entry.
•
Mark video call
: set the selected number as
a video call number.
4. Press [
OK
] to save the contact.
Adding a contact to the USIM/SIM card
1. Select
SIM
.
2. Enter information about the contact:
•
Name
: assign a name.
•
Phone number
: enter a phone number.
•
Group
: (For USIM) assign a caller group.
•
Location number
: assign a location
number.
3. If you are using a USIM card, press <
Options
>
to add additional information:
•
Add item
: add a number type to the contact.
•
Delete item
: remove the selected category
from the contact.
4. Press <
Save
> to save the contact.
Groups
(Menu 2.3)
Use this menu to organise your contacts in caller
groups.
Adding members to a caller group
1. Select a group.
2. Press [
OK
] to check the contacts you want.
3. Press <
Save
>.
Menu functions
34
Managing caller groups
From the group list, press <
Options
> to access the
following options:
•
View members
: display the members of the
selected group.
•
Add member
: add contacts to the selected
group, if the group does not have any.
•
Add group
: add a new group.
•
Rename group
: change the group name.
•
Delete group
: delete the selected group.
•
Delete all groups
: delete all groups including
default groups.
Speed dial
(Menu 2.4)
Use this menu to assign speed dial numbers (2 to 9)
to 8 of your most frequently dialled numbers.
Assigning speed dial entries
1. Select a key location from
2
to
9
. Key
1
is
reserved for your voice mail server.
2. Select the contact you want from the contact list.
3. Select a number.
Managing speed dial entries
From the Speed dial screen, press <
Options
> to
access the following options:
•
Add
: assign a number to an unassigned key.
•
Details
: check the name and number assigned
to a key.
•
Video call
: make a video call, if the 3G service
is available.
•
Change
: assign a different number to a key.
•
Remove
: clear the speed dial setting for a key.
Dialling speed dial numbers
In Idle mode, press and hold the appropriate key.
My name card
(Menu 2.5)
Use this menu to create your name card and send it
to other people.
Saving your name card
The procedure for creating your name card is the
same as the one for saving a number in the phone’s
memory.
p. 33
Using name card options
After saving your name card, press <
Options
> to
access the following options:
•
Edit
: edit the name card.
•
Send name card
: send the name card via SMS,
e-mail, file messenger, or Bluetooth.
•
Delete
: delete the name card.
Copy all
(Menu 2.6)
Use this menu to copy all of the contacts stored on
the
USIM/
SIM card to the phone’s memory, or vice
versa.
35
Menu functions
Applications
(Menu 3)
Own number
(Menu 2.7)
Use this feature to check your phone numbers, or to
assign a name to each of the numbers. Changes
made here do not affect the actual subscriber
numbers on your
USIM/
SIM card.
Service number
(Menu 2.8)
Use this menu to view the list of Service Dialling
Numbers (SDN) assigned by your service provider,
including emergency numbers and numbers for
directory enquiries. This menu is available if your
USIM/SIM card supports SDN.
1. Scroll to the number you want.
2. Press <
Call
> or [ ].
Settings
(Menu 2.9)
Use this menu to change the default settings for
Contacts entries.
•
Viewing settings
: change the sort order of the
contact list.
•
Default storage settings
: select a default
memory location for saving contacts. If you
select
Optionally
, the phone will ask you to
select a memory location each time you save a
number.
Memory status
(Menu 2.0)
Use this menu to check the number of contacts you
have stored in the phone’s memory and on the
USIM/SIM card.
Applications
(Menu 3)
This menu provides you with access to multimedia
content you can get on the website preset by TIM,
the service provider. You can also play music and
video files stored in your phone’s memory.
To access this menu, press [
OK
] in Idle mode and
select
Applications
.
Mobile TV
(Menu 3.1)
Use this menu to connect to the preset website to
access the online TV service. For further details,
contact your service provider.
Viewing the TV
On the channel list, select a channel and select a
programme. The streaming player opens and you
can watch TV online.
Using channel list options
Press <
Options
> to access the following options:
•
Watch
: watch TV online.
•
View program list
: access the programme list
for the highlighted channel. You can access the
programme list options by pressing <
Options
>:
Set alert SMS
: register the programme to the
Mobile TV server so that the Mobile TV server
informs you via SMS before the programme
starts.
Update program list
: refresh the programme
list for the selected channel.
Menu functions
36
•
Update channels
: refresh the channel and
banner information.
•
Cost info
: check cost information for using the
online TV.
i Music Store
(Menu 3.2)
Use this menu to access a variety of music files and
buy them on the website preset by your service
provider. For details, contact your service provider.
From the i Music Store screen, press <
Options
> to
access the following options:
•
Enter
: access the homepage of the i.Music
Store.
•
Go to playlist
: open the play list.
•
Go to all music
: access all music files stored in
the phone’s memory.
•
Exit
: exit the
i Music Store
menu and return to
the previous menu level.
SAT
(Menu 3.3)
This menu is available if you use a USIM/SIM card
that supports SIM Application Toolkit menus and
provides additional services, such as news, weather,
sports, entertainment, and location services.
Available services may vary, depending on your
service provider’s plans.
For details, see your
USIM/
SIM card instructions or
contact your service provider.
Media player
(Menu 3.4)
You can enjoy music and video files from the phone’s
memory and a memory card. First, you need to save
files to your phone’s memory.
Downloading or receiving music or video
files
You can play the following types of files on your
phone:
• Music: MP3, AAC, AAC
+
• Video: MP4, H.263, 3GP
Use the following methods to save music or video
files to your phone’s memory:
• Download from the wireless web
p. 38
• Download from a computer using Samsung PC
Studio
Samsung PC Studio User’s Guide
• Receive via an active Bluetooth connection
p. 73
• Copy to a memory card and insert the card into
the phone
p. 22
Creating a play list
Add the media files to the play list so you can play
them.
1. From the Media player screen, press [
OK
].
2. Press <
Options
> and select
Add
.
3. Select
Folder
or
Files
.
4. Scroll to the folder you want, or press [
OK
] to
select the files you want.
37
Menu functions
Applications
(Menu 3)
5. Press <
Select
> or <
Add
>.
Playing media files
1. From the Media player screen, press [
OK
].
2. Select a file. The file plays.
During playback, use the following keys:
Using media player options
While playing a file, press <
Options
> to access the
following options:
•
Pause
/
Resume
: pause or resume playback.
•
Stop
: stop playback.
•
Send
: send the file via MMS, e-mail, file
messenger, or Bluetooth. You can also send the
selected file to the online media album, if
provided.
•
Add to play list
: add the file to the play list.
•
Open play list
: access the play list.
•
Activate key
: get a new license key when the
key for the selected DRM file expires.
•
Reactivate key
: get another license key even
when the key for the selected DRM file has not
expired.
•
Go to file Manager
: go to the
Downloads
folder in
Music
.
•
Hidden from Bluetooth
: hide the file so that
other bluetooth devices cannot access it.
•
Visible to Bluetooth
: share the file with other
Bluetooth devices.
•
Show controller
/
Hide controller
: display or
hide the controller image.
•
Details
: access the file properties.
•
Player settings
: change the default settings for
playing media files:
Play options
: select a repeat mode.
Volume
: select a volume level.
Controller
: display or hide the controller image.
Audio player skin
: select a skin image.
•
VOD settings
:
select a connection profile to be
used for accessing a video streaming server. You
can also create or edit a profile.
p. 76
Keys Function
OK Pauses or resumes playback.
Left Returns to the previous file. Moves
backward in a file when held down.
Right Skips to the next file. Skips forward in a
file when held down.
Up Opens the play list.
/
Adjusts the volume.
Down Stops playback.
Menu functions
38
Using play list options
From the media player screen, press [Up] to access
the play list and press <
Options
> to access the
following options:
•
Play
: play the currently selected file.
•
Add
: add files or a folder to the play list.
•
Remove
: remove the selected file or all files
from the current play list.
•
Move
: move the selected file to the position you
want within the current play list or another play
list.
•
Copy
: make a copy of the selected file in the
current play list or another play list.
•
New list
: add a new play list.
Playing music files with the phone closed
Press and hold [ ] to launch the media player and
start playback. Use the following keys to control the
media player:
Internet
(Menu 4)
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
Using the web browser, you can access up-to-the-
minute information and a wide variety of media
contents, such as wallpapers, ringtones, and music
files.
To access this menu, press [
OK
] in Idle mode and
select
Internet
.
Go to homepage
(Menu 4.1)
You can launch the web browser and access the
homepage of the web service provided by your
service provider.
Navigating the web browser
Key Function
Pauses or resumes playback. Closes the
media player when held down.
Returns to the previous file. Moves
backward in a file when held down.
Skips to the next file. Skips forward in a
file when held down.
/
Adjusts the volume.
Locks the exposed keys when held down
to keep accidental presses from affecting
playback.
To Press
scroll through browser
items
[Up] or [Down].
select a browser item [
OK
] or <
Select
>.
return to the previous
page
<
Back
> or [
C
].
Key Function
39
Menu functions
Internet
(Menu 4)
Using browser menu options
From any web page, press <
Options
> to access the
following browser options:
•
Go to homepage
: go back to the homepage.
•
Enter URL
: manually enter the URL address of
the web page you want to access.
•
Reload
: reload the current page with updated
information.
•
Add favourite
: add the current page to your
bookmark list.
•
Favourites
: access the bookmark list.
•
History
: show URLs previously visited.
•
Send URL
: send the URL via SMS, e-mail, or file
messenger.
•
Saved pages
: access the saved page list.
•
Save
: save the image of the current web page or
the current page.
•
Advanced
: change the various settings for the
browser.
Copy text
: copy the currently selected word.
Search text
: search for a specific word or
phrase from the current web page.
Clear history
: delete the URLs stored in the
history.
Clear cookies
: delete cookies. Cookies are
pieces of personal information sent to a web
server while navigating the web.
Clear cache
: clear the cache. The cache is a
temporary memory site that stores recently
accessed web pages.
Details
: access the page properties.
Browser settings
: change the settings for
browser display, security, and certificates.
Network settings
: select a connection profile
to be used for connecting to the Internet. You
can also create or edit a profile.
p. 76
Exiting the web browser
Press [ ] to end the network connection and exit
the browser.
Enter URL
(Menu 4.2)
Use this menu to manually enter a URL address and
access the associated web page.
Favourites
(Menu 4.3)
Use this menu to save URL address in order to
quickly access web pages, or access the preset
bookmarks.
Adding a bookmark
1. Press <
Options
> and select
New
→
Favourite
,
if one has been already stored.
2. Enter a URL and press [
OK
].
3. Enter a name for the item and press <
OK
>.
4. Press <
Options
> and select
OK
.
Menu functions
40
Using bookmark options
From the Favourites screen, press <
Options
> to
access the following options:
•
Open
: access the page of the selected
bookmark.
•
Details
: access the bookmark details.
•
Send URL
: send the bookmark via SMS, e-mail,
or file messenger.
•
New
: add a new bookmark or folder.
•
Edit
: edit the selected bookmark.
•
Move
: move the selected bookmark.
•
Delete
: delete the selected bookmark or all
bookmarks.
History
(Menu 4.4)
You can access the list of pages you have accessed
recently.
Select a URL from the list to access the
corresponding web page.
Browser settings
(Menu 4.5)
Use this menu to change the settings for browser
display, security, and certificates.
Network settings
(Menu 4.6)
Use this menu to select a connection profile to be
used for connecting to the Internet. You can also
create or edit a profile.
p. 76
Messages
(Menu 5)
Use the
Messages
menu to send and receive text
messages, multimedia messages, and e-mails. You
can also use Push message, Voice mail, Cell
broadcast message, and Configuration message
features.
To access this menu, press [
OK
] in Idle mode and
select
Messages
.
Create new
(Menu 5.1)
Use this menu to create and send text messages,
multimedia messages, or e-mails. You can also send
files using MMS.
Text message
(Menu 5.1.1)
Short Message Service (SMS) allows you to send or
receive text messages.
Creating and sending an SMS message
1. Enter your message and press [
OK
].
• The maximum number of characters
allowed in a short message varies by
service provider. If your message exceeds
the maximum number of characters, the
phone will split the message.
• You can use various message composing
options by pressing <
Options
> in each
field.
next section
41
Menu functions
Messages
(Menu 5)
2. Enter a destination number.
To send the message to more than one recipient,
fill in additional destination fields.
3. Press [
OK
] to send the message.
Using options while composing an SMS
message
While composing a message, press <
Options
> to
access the following options:
•
Send
: send the message.
•
Input method
: change the text input mode.
•
Input language
: change the language to be
used in T9 input mode.
•
Insert
: insert a text template, Contacts entry, or
bookmarked URL address into text.
•
Save to Drafts
: save the message in the
Drafts
box.
Multimedia message
(Menu 5.1.2)
Multimedia Message Service (MMS) delivers
messages containing a combination of text, image,
video, and audio, from phone to phone or from
phone to e-mail.
Creating and sending an MMS message
1. Enter the message subject.
2. Select the
Text
line.
3. Enter the message text and press [
OK
].
4. Select the
Picture or Video
line and add an
image or video clip.
5. Select the
Audio
line and add a sound clip.
6. When you have finished, press [
OK
].
7. Enter a phone number or e-mail address.
To send the message to more than one recipient,
fill in additional destination fields.
8. Press [
OK
] to send the message.
Using options while composing an MMS
message
While composing an MMS message, press
<
Options
> to access the following options:
•
Send
: send the message.
•
Input
: enter the message text.
•
Add files
: add an image, video, or sound clip.
•
Preview
: view the message as it will be shown
on the recipient’s phone.
•
Input method
: change the text input mode.
•
Input language
: change the language to be
used in T9 input mode.
You can use various message composing
options by pressing <
Options
> in each
field.
next section
• The maximum size allowed for a message
can differ, depending on your service
provider.
• Depending on the file type or DRM
(Digital
Rights Management) system,
some files
may not be able to be forwarded.
Menu functions
42
•
Insert text template
: insert a text template.
•
Save to Drafts
: save the message in the
Drafts
box.
•
Add page
: add a page. Move to each page by
pressing [Left] or [Right].
•
Move page
: move the current page to the next
or previous page.
•
Delete page
: delete the added page.
•
Edit style
: change the page properties.
This page
: set the page duration and change
font colour and style for the selected page.
All page
: change the background colour and
page layout.
•
Edit
Text
/
Change file
: edit the added text,
image, or sound clip.
•
Delete
text
/
Delete file
: delete the added text,
image, or sound clip.
•
Save as template
: save the message as a
template in the
Multimedia templates
folder.
TIMClick
(Menu 5.1.3)
Using this menu, you can create and send a photo
postcard or send a photo to a printing service shop.
Creating and sending a postcard
1. Select
Postcard
.
2. Select
Greeting msg.
.
3. Enter the message text and press [
OK
].
4. Select
Picture
.
5. Select the photo you want to send and press
<
Add
>.
6. When you have finished, press [
OK
].
7. Specify the recipient’s postal address: Name,
Additional information, Street, ZIP, City, and
Country.
8. Press [
OK
] to send the postcard.
Using options while composing a postcard
While composing a postcard, press <
Options
> to
access the following options:
•
Preview
: view the message as it will be shown
on the recipient’s phone.
•
Edit text
/
Change picture
: change the added
item.
•
Remove text
/
Remove picture
: remove the
added item.
•
Save to Drafts
: save the message in the
Drafts
box.
Sending a photo to a printing service agency
1. Select
Print
.
2. Select
Picture
.
You can use photos of VGA (640 x 480) or larger
size for this service.
You can use various message composing
options by pressing <
Options
> in each
field.
next section
43
Menu functions
Messages
(Menu 5)
3. Select the photo you want to send and press
<
Add
>.
4. Press <
Options
> to access the following
options:
•
Preview
: view the message as it will be
shown on the recipient’s phone.
•
Change picture
: change the added photo.
•
Remove picture
: delete the added photo.
5. When you have finished, press [
OK
].
6. Enter the shop’s postal code.
7. Press [
OK
] to send the photo.
Email
(Menu 5.1.4)
You can send and receive e-mails that include text,
audio, and images. To use this feature, you need to
subscribe to an e-mail service and set up your
e-mail account.
p. 52
Creating and sending an e-mail
1. Enter the e-mail subject.
2. Move to the
Message
field.
3. Enter the message text.
4. Select the
Attach files
line.
5. Scroll to a media file folder and press [
OK
] to
check files.
6. Press <
Options
> and select
Attach
.
7. When you have finished, press [
OK
].
8. Enter an e-mail address.
To send the e-mail to more than one recipient, fill
in additional destination fields.
9. Press [
OK
] to send the e-mail.
Using options while composing an e-mail
While composing an e-mail, press <
Options
> to
access the following options in each field:
•
Send
: send the message.
•
Input method
: change the text input mode.
•
Input language
: change the language to be
used in T9 input mode.
•
Insert text template
: insert a text template.
•
Insert
: insert a text template, Contacts entry, or
bookmarked URL address into text.
•
Attached file list
: access the file list you
attached.
•
Add files
: add images, videos, or sounds.
•
Add name card
: attach a Contacts entry as a
name card.
•
Add v-calendar
: attach calendar data as a data
format attachment.
•
Delete all attachments
: delete all
attachments.
•
Save to Drafts
: save the e-mail in the
Drafts
box.
You can use various message composing
options by pressing <
Options
> in each
field.
next section
Menu functions
44
File messenger
(Menu 5.1.5)
Use this menu to send multiple media files by
attaching them to an MMS message.
Creating and sending files via MMS
1. Enter a subject in the
Subject
line.
2. Move to the
Message
field.
3. Enter the message text.
4. Move to the
Attach files
line.
5. Press <
Options
> and select
Add files
,
Add
name card
, or
Add v-calendar
.
6. Select images, videos, sounds, name cards,
schedule items, or tasks.
7. Press <
Options
> and select
Attach
.
8. When you have finished, press [
OK
].
9. Enter a phone number or e-mail address.
To send the message to more than one recipient,
fill in additional destination fields.
10. Press [
OK
] to send the message.
Using options while composing a message
While composing a message, press <
Options
> to
access the following options in each field:
•
Send
: send the message.
•
Input method
: change the text input mode.
•
Input language
: change the language to be
used in T9 input mode.
•
Insert text template
: insert a text template.
•
Insert
: insert a text template, Contacts entry, or
bookmarked URL address into text.
•
Attached file list
: display the file list you
attached.
•
Add files
: add images, videos, or sounds.
•
Add name card
: attach a Contacts entry as a
name card.
•
Add v-calendar
: attach calendar data as a data
format attachment.
•
Delete all attachments
: delete all
attachments.
•
Save to Drafts
: save the message in the
Drafts
box.
Inbox
(Menu 5.2)
This folder stores all types of messages you have
received, except for e-mails.
Viewing a message
The following icons may appear on the message list
to show the message type:
• SMS
• MMS
• MMS notification
• Push message from web servers.
You can use various message composing
options by pressing <
Options
> in each
field.
next section
45
Menu functions
Messages
(Menu 5)
• Configuration message, containing network
parameters from your service provider.
• USIM/SIM
Using message options
While viewing a message, press <
Options
> to
access the following options:
SMS messages
•
Reply
: reply to the sender via SMS, MMS, or file
messenger.
•
Forward
: forward the message to other people.
•
Call back
: dial the phone number of the sender.
•
Save to Contact
: extract phone numbers or
e-mail addresses from the message and save
them in Contacts.
•
Move to SIM
/
Move to phone
: move the
message between the phone’s memory and the
USIM/SIM card.
•
Delete
: delete the message.
MMS messages
•
Play
:
play the message.
•
Call
/
Go to URL
/
Go to RTSP
: dial the
highlighted phone number or access the
highlighted web link.
•
Add to bookmarks
: save the highlighted web
link to the bookmark list.
•
Create email
: send an e-mail to the highlighted
e-mail address.
•
Create multimedia msg.
: send an MMS
message to the highlighted e-mail address.
•
Reply
: reply to the sender via SMS, MMS, or file
messenger.
•
Reply to all
: send a reply to the sender and all
recipients.
•
Forward
: forward the message to other people.
•
Call back
: dial the phone number of the sender.
•
Save as template
: save the message as a
template in the
Multimedia templates
folder.
•
Save files
: save media items from the message
into your phone’s memory or a memory card.
•
Save to Contacts
: extract phone numbers or
e-mail addresses from the message and save
them in Contacts.
•
Delete
: delete the message.
•
Details
: access the message properties.
Push messages
•
Go to URL
/
Go to RTSP
: connect to the URL
specified in the message.
•
Delete
: delete the message.
• Depending on the file type or DRM (Digital
Rights Management) system, some files may
not be able to be forwarded.
• A
!
icon next to a message means that the
message is of high priority. A grey-coloured
message icon indicates low priority.
Menu functions
46
Configuration messages
•
Install
: apply the configuration specified in the
message to your phone.
•
Delete
: delete the message.
Delivery reports
•
Call sender
: dial the phone number of the
sender.
•
Save contact to
: extract URLs, e-mail
addresses, or phone numbers from the report.
•
Delete
: delete the report.
Drafts
(Menu 5.3)
This folder stores messages you have saved to send
them at a later time.
From the message list, press <
Options
> to access
the following options:
•
View
: open the selected MMS message.
•
Edit
: edit the selected message.
•
Sort by
: change the sort order of the message
list.
•
Delete
: delete the selected message.
•
Delete all
: delete all messages.
Outbox
(Menu 5.4)
This folder stores messages the phone is attempting
to send or has failed to send.
The following icons on the message indicates the
sending status:
• Being sent
• Failed to be sent
From the message list, press <
Options
> to access
the following options:
•
View
: open the selected MMS message.
•
Send again
: resend the message.
•
Edit
: edit the selected message.
•
Cancel sending
: cancel sending the message.
•
Sort by
: change the sort order of the message
list.
•
Delete
: delete the selected message.
•
Delete all
: delete all messages.
•
Details
: access the message properties.
Sent box
(Menu 5.5)
This folder stores messages that you have sent.
From the message list, press <
Options
> to access
the following options:
•
View
: open the selected message.
•
Forward
: forward the message to other people.
•
Sort by
: change the sort order of the message
list.
•
Delete
: delete the message.
•
Delete all
: delete all messages.
•
Details
: access the message properties.
47
Menu functions
Messages
(Menu 5)
Email inbox
(Menu 5.6)
This folder stores e-mails that you have received.
Viewing received e-mails
1. Press <
Options
> and select
Download
.
The phone checks the e-mail server and
downloads new e-mails. The icons tell you the
status of each e-mail:
•: Retrieved e-mail
• : Retrieved e-mail with attachments
• : E-mail not retrieved
2. Select an e-mail or header.
3. If the e-mail has more than one page, press
[
/
] to scroll through pages one by one.
4. Select an attached file to view or play it.
Using e-mail options
While viewing the e-mail list or an e-mail, press
<
Options
> to access the following options:
•
View
: open the selected e-mail.
•
Retrieve
: retrieve the body of the selected
e-mail header from the e-mail server.
•
Reply
: send a reply to the sender.
•
Reply to all
: send a reply to the sender and all
recipients.
•
Forward
: forward the e-mail to other people.
•
Download
: retrieve new e-mails or headers
from the e-mail server.
•
Sort by
: change the sort order of the message
list.
•
Save files
: save the selected file.
•
Save to Contacts
: extract phone numbers or
e-mail addresses from the e-mail and save them
in Contacts.
•
Block
:
add the sender’s e-mail address or
subject to the Block list to reject e-mails from
that address or containing that subject.
•
Delete from phone
: delete the selected e-mail
or all e-mails from the phone.
•
Delete permanently
: delete the selected
e-mail or all e-mails from both the phone and the
e-mail server.
•
Email accounts
: change the active e-mail
account.
•
Details
: access the e-mail properties.
Media Album
(Menu 5.7)
Use this menu to access the Media Album service,
with which you can organise your own online media
album, adding media content and messages via the
wireless web. This menu is only available if
supported by your service provider.
• Depending on the file type or DRM
(Digital
Rights Management) system, some files
may not be able to be forwarded.
• A
!
icon next to a message means that the
message is of high priority. A grey-coloured
message icon indicates low priority.
Menu functions
48
Templates
(Menu 5.8)
Use this menu to make and use templates of
frequently used messages or passages.
Text templates
(Menu 5.8.1)
You can create SMS templates with the sentences
you use frequently so that you can retrieve and
insert them when composing an SMS message.
Creating a template
1. Press <
New
>, or press <
Options
> and select
New
, if one has been already stored.
2. Enter a message and press [
OK
].
Using template options
From the text template list, press <
Options
> to
access the following options:
•
Edit
: change the selected template.
•
Send
:
send the template as an SMS, MMS, file
messenger, or e-mail.
•
New
: add a new template.
•
Delete
: delete the template.
•
Delete all
: delete all templates.
Multimedia templates
(Menu 5.8.2)
You can create MMS templates so that you can use
them in composing an MMS message.
Creating a template
1. Press <
New
>, or press <
Options
> and select
New
, if one has been already stored.
2. Create a template as you would when creating
an MMS message.
3. Press [
OK
] to save the template.
Using template options
From the template list, press <
Options
> to access
the following options:
•
View
: open the selected template.
•
Send
:
send a new message.
•
New
: add a new template.
•
Edit
: change the selected template.
•
Delete
: delete the template.
•
Delete all
: delete all templates.
Broadcast
(Menu 5.9)
Your phone receives Cell Broadcast (CB) messages,
which are text messages related to various topics,
such as weather forecast, traffic, and news report,
from networks. Use this menu to access received CB
messages.
49
Menu functions
Messages
(Menu 5)
Viewing a CB message
All CB messages are stored in the
Temporary
folder
and will be deleted after a period of time. If you do
not want a message to be deleted, save it to the
Archive
folder. While viewing the message, press
<
Options
> and select
Save
.
Using message options
While viewing a message, press <
Options
> to
access the following options:
•
Call
/
Go to URL
/
Go to RTSP
: dial the
highlighted phone number or access the
highlighted web link.
•
Create email
: send an e-mail to the highlighted
e-mail address.
•
Save
: save the message in the
Archive
folder.
•
Delete
: delete the message.
Delete all
(Menu 5.0)
Use this menu to delete all of the messages in each
message folder at once.
1. Press [
OK
] to check the message boxes you
want.
2. Press <
Delete
>.
3. Press <
Yes
> to confirm the deletion.
Settings
(Menu 5.
*
)
Use this menu to set up various options for using
messaging service.
Text message
(Menu 5.
*
.1)
You can configure SMS settings.
•
Settings x
: set the properties of each profile:
Centre address
: store or change the number of
your SMS server.
Expiration
: set the length of time your
messages are stored in the SMS server.
Default type
: set the default message type. The
network can convert messages into the selected
format.
Name
: enter a profile name.
•
Sending options
: set up the options for sending
SMS messages:
Reply path
: allow recipients to reply to you
through your SMS server.
Delievery report
: set the network to inform
you when your message has been delivered.
Network selection
: select
CS preferred
(GSM) or
PS preferred
(GPRS), depending on
your network.
Keep a copy
: leave the copies of your messages
in the
Sent box
folder after sending.
Menu functions
50
Character support
: select a character encoding
type. When you select
Automatic
, the phone
switches the encoding type from GSM alphabet
to Unicode if you enter a unicode character. Use
of Unicode encoding will reduce the maximum
number of characters in a message to about half.
If this menu is not shown, your phone provides
the automatic character encoding by default.
Multimedia message
(Menu 5.
*
.2)
You can configure MMS settings.
•
Sending options
: set up the options for sending
MMS messages:
Priority
: set the priority level of your messages.
Expiration
: set the length of time your
messages are stored in the MMS server.
Delivery
: set a time delay before messages are
sent.
Hide address
: set your address to be hidden
from the recipient’s phone.
Request delivery report
: set the network to
inform you when your message has been
delivered.
Request read report
: send a read-replay
request along with your messages.
Keep a copy
: leave the copies of your messages
in the
Sent box
folder after sending.
Add my name card
: allow your contact
information to be attached to your messages via
the file messenger.
Add signature
: edit and attach your signature
to messages via the file messenger.
•
Receiving options
: set up the options for
receiving MMS messages:
Home network
: determine if your phone
retrieves new messages automatically when you
are in your home service area.
Roaming network
: determine if your phone
retrieves new messages automatically when you
are roaming in another network.
Reception within your home network or while
roaming has the following options:
-
Auto download
: the phone automatically
retrieves messages from the server.
-
Manual
: the phone receives notifications first
from the server. Use the
Retrieve
option to
manually download new messages.
-
Restricted
: the phone receives notifications
first from the server. When you attempt to
download new messages, the phone informs
you of additional charges.
-
Reject
: the phone rejects all messages.
Send delivery report
: set the network to
inform the sender when a message has been
delivered to you.
Send read report
: determine whether or not
the phone sends a read-reply when an incoming
message has been read.
51
Menu functions
Messages
(Menu 5)
Reject anonymous
: reject messages from
unknown senders.
Reject advertisement
: reject advertisements.
•
MMS profiles
: select a connection profile to be
used for MMS. You can also create or edit a
profile.
p. 76
•
Message size
: select the maximum file size of
MMS attachment. This file size may vary,
depending on your country.
•
Creation mode
: select an MMS creation mode:
Warning
: you can create a message with any
type of content and of any size, but the phone
will inform you when the content and size have
exceeded the maximum.
Free mode
: you can create a message with any
type of content and of any size.
Restrict
: you can create a message with the
type of content and size.
•
Slide interval
: select the length of time the
display shows each page in a message.
Email
(Menu 5.
*
.3)
You can configure e-mail settings.
•
Sending options
: set up the options for sending
e-mails:
From
: set the sender name.
Sending account
: select the default account.
Priority
: select the priority level of e-mails.
Keep a copy
: leave the copies of your e-mails in
the
Sent box
folder after sending.
Include body when replying
: set whether or
not the phone includes the original e-mail text in
a reply.
Delivery report
: set the network to inform you
when your e-mail have been delivered.
Add my name card
: allow your contact
information to be attached to e-mails.
Add signature
: attach your signature to
e-mails.
Input signature
: edit your signature.
•
Receiving options
: set up the options for
receiving e-mails:
Set download limit
: determine the maximum
size for incoming e-mails. Your phone will reject
e-mails that exceed the specified size.
You cannot change e-mail profile settings while
an e-mail is being sent or retrieved.
Menu functions
52
Auto polling
: set the phone to automatically
check the e-mail server to download e-mails at
the specified intervals.
Polling frequency
: set how often the phone
checks the e-mail server for automatic polling.
Block address
: specify e-mail addresses to
reject e-mails from those addresses, and
activate or deactivate mail blocking.
Block subject
: specify subjects to reject e-mails
which contain those subjects you specify, and
activate or deactivate mail blocking.
•
Email profiles
: select a network connection
profile to be used for e-mail services. You can
also create or edit a profile.
p. 76
•
Email accounts
: set up an e-mail account and
select an account to be used. Press <
Options
>
and select
Edit
to access the following options
for setting up an account:
Account name
: enter a name for the currently
selected account.
SMTP server
: enter the IP address or host
name of the outgoing e-mail server.
SMTP port
: enter the SMTP port number.
Use SSL
: activate the use of the SSL (Secure
Sockets Layer) protocol.
Retrieving server type
: select the protocol for
the incoming e-mail server. The remaining
options depend on the protocol type setting.
POP3 server
/
IMAP4 server
: enter the IP
address or host name of the POP3 or IMAP4
server.
POP3 port
/
IMAP4 port
: enter the POP3 or
IMAP4 port number.
Use SSL
: activate the use of the SSL (Secure
Sockets Layer) protocol.
IMAP4 retrieving option
: (IMAP4 protocol
only): set whether the phone retrieves only new
messages or all messages.
Retrieving option
: set which part of e-mails
the phone retrieves from the server.
Keep in server
: leave the copies of e-mails in
the server after retrieving.
My Address
: set your e-mail address.
User name
: enter the POP3 or IMAP4 user
name.
Password
: enter the POP3 or IMAP4 password.
Use SMTP Authentication
: enable SMTP
authentication, which requires the user to log in
before sending e-mails.
Same as POP3/IMAP4
: select if you want the
SMTP server to have the same parameters as the
POP3 or IMAP4 server.
User name
: enter the SMTP user name.
Password
: enter the SMTP password.
53
Menu functions
File manager
(Menu 6)
Voice mail
(Menu 5.
*
.4)
You can change the number of the voicemail server.
Push message
(Menu 5.
*
.5)
You can change the settings for receiving push
messages from the wireless web server.
•
Receiving option
: set whether or not to receive
push messages from the web server.
•
Service loading
: set how your phone receives
push messages.
Broadcast
(Menu 5.
*
.6)
You can change the settings for receiving CB
messages.
•
Receive
: select to receive CB messages, or not.
•
Channel
: indicate the channels from which you
wish to receive CB messages. Please contact
your service provider for further details.
•
Language
: select the preferred languages in
which CB messages display.
Memory status
(Menu 5.#)
Use this menu to view the memory status for Text
message, Multimedia message, Email, Push
message.
File manager
(Menu 6)
The
File manager
menu allows you to access
images, videos, music files, and sounds stored in the
phone’s memory or a memory card.
To access this menu, press [
OK
] in Idle mode and
select
File manager
.
Tips for Digital Rights Management
As a result of the Digital Rights Management (DRM)
system, some of the media items you download
from the Internet or receive by MMS may require a
licence key to access them. You can acquire the key
from the website which owns the rights to the
content; use the
Activate key
option.
Note the following icons on the list:
• : Forwardable item with a valid key.
• : Forwardable item without a valid key.
• : Unforwardable item with a valid key.
• : Unforwardable item without a valid key.
Your phone supports only count-based or unlimited-
access DRM files.
Images
Use this menu to access photos you have taken and
images you have downloaded, received in
messages, or imported from your computer.
You must store the voicemail server number
before accessing the server. Your service provider
can give you the number.
Menu functions
54
Viewing an image
1. Scroll to an image folder.
2. Select an image.
Viewing a slide show
You can view your images as a slide show, a
sequential presentation of each image in the current
folder.
1. Scroll to an image folder.
2. Select an image.
3. Press <
Options
> and select
Slide show
.
The slide show begins.
4. Press <
Back
> to stop the slide show.
Editing an image
1. Select a photo from the
Pictures
folder.
2. Press <
Options
> and select
Edit
.
3. Press <
Options
> and change the photo using
the following options:
•
Resize
: change the image size.
•
Effects
: change the colour tone or apply a
special effect to the photo.
•
Adjust
: adjust the brightness, contrast, or
colour balance.
•
Frames
: apply a decorative frame.
•
Cliparts
: add an image clip to the photo.
•
Insert text
: add text to the photo.
•
Rotate
: rotate the photo clockwise or
counterclockwise.
•
Flip
: flip the photo vertically or horizontally.
•
Crop
: select a variously sized and shaped
section of the photo.
4. When you have finished, press [
OK
]
.
5. Enter a photo name and press <
Save
>.
Using image options
While viewing a file, press <
Options
> to access the
following options:
•
Send
: send the selected file via MMS, TIMClick
service, e-mail, file messenger, or Bluetooth. You
can also send the file to the online media album,
if provided.
•
Print
:
•
Print via Bluetooth
: print the image via a
Bluetooth-compatible devices.
•
Hidden from Bluetooth
: hide the file so that
other Bluetooth devices cannot access it.
•
Visible to Bluetooth
: share the file with other
Bluetooth devices.
•
Set as
: set the image as your wallpaper for the
displays or a caller ID image for a Contacts
entry.
•
Move
: move the file to another folder.
•
Copy
: copy the file to another folder.
•
Delete
: delete the file.
•
Rename
: change the file name.
•
Lock
/
Unlock
: lock the file to prevent it from
being deleted, or unlock the file.
55
Menu functions
File manager
(Menu 6)
•
New folder
: add a new folder.
•
Details
: access the file properties.
•
Memory status
: access the memory
information for each folder in
File manager
.
Downloading images
1. Scroll to the
Downloads
folder.
2. Select
More pictures
. You are connected to the
preset website by your service provider.
3. Search for the file you want and follow the
onscreen instructions to download it.
Videos
Use this menu to access video clips you have
recorded, downloaded, received in messages, or
imported from your computer.
Playing a video clip
1. Scroll to a video folder.
2. Select a video clip. The media player opens.
p. 37
Using video options
From the video list, press <
Options
> to access the
following options:
•
Play
: play the selected file.
•
Add to play list
: add the selected file to the
play list.
•
Send
: send the selected file via MMS, e-mail, file
messenger, or Bluetooth. You can also send the
file to the online media album, if provided.
•
Hidden from Bluetooth
: hide the file so that
other Bluetooth devices cannot access it.
•
Visible to Bluetooth
: share the file with other
Bluetooth devices.
•
Move
: move the file to another folder.
•
Copy
: copy the file to another folder.
•
Delete
: delete the selected file or all files.
•
Rename
: change the file name.
•
Lock
/
Unlock
: lock the file to prevent it from
being deleted, or unlock the file.
•
New folder
: add a new folder.
•
Details
: access the file properties.
•
Memory status
: access the memory
information for each folder in
File manager
.
•
Key management
: manage license keys you
have acquired.
Downloading video clips
1. Scroll to the
Downloads
folder.
2. Select
More videos
. You are connected to the
preset website by your service provider.
3. Search for the file you want and follow the
onscreen instructions to download it.
Video clips recorded on other devices, such as
camcorders, may not play correctly.
Menu functions
56
Music
This menu displays AAC or MP3 music files you have
downloaded or received in messages.
Playing a music file
Select a music file. The selected music file
plays.
p. 37
Using music options
From the music list, press <
Options
> to access the
following options:
•
Play
: play the selected file.
•
Add to play list
: add the selected file to the
play list.
•
Send
: send the selected file via MMS, e-mail, file
messenger, or Bluetooth. You can also send the
file to the online media album, if provided.
•
Hidden from Bluetooth
: hide the file so that
other Bluetooth devices cannot access it.
•
Visible to Bluetooth
: share the file with other
Bluetooth devices.
•
Set as ringtone
: set the file as your ringtone
for voice calls or video calls.
•
Set as caller ID
: set the file as a caller ringer
ID.
•
Move
: move the file to another folder.
•
Copy
: copy the file to another folder.
•
Delete
: delete the selected file or all files.
•
Rename
: change the file name.
•
Lock
/
Unlock
: lock the file to prevent it from
being deleted, or unlock the file.
•
New folder
: add a new folder.
•
Details
: access the file properties.
•
Memory status
: access the memory
information for each folder in
File manager
.
Downloading music files
1. Select
More music
. You are connected to the
preset website by your service provider.
2. Search for the file you want and follow the
onscreen instructions to download it.
Sounds
Use this menu to access voice memos you have
recorded, and sound clips you have downloaded,
received in messages, or imported from your
computer.
Playing a sound clip
1. Scroll to a sound folder.
2. Select a sound clip. The music player opens and
the selected sound plays.
For a voice memo, see
Voice memo
.
p. 62
During playback, use the following keys:
Keys Description
Left Moves to the previous file.
Right Skips to the next file.
57
Menu functions
File manager
(Menu 6)
Using sound options
While playing a sound clip, press <
Options
> to
access the following options:
•
Send
: send the selected file via MMS, e-mail, file
messenger, or Bluetooth. You can also send the
file to the online media album, if provided.
•
Hidden from Bluetooth
: hide the file so that
other Bluetooth devices cannot access it.
•
Visible to Bluetooth
: share the file with other
Bluetooth devices.
•
Set as ringtone
: set the file as your ringtone
for voice calls or video calls.
•
Set as caller ID
: set the file as a caller ringer
ID.
•
Move
: move the file to another folder.
•
Copy
: copy the file to another folder.
•
Delete
: delete the selected file.
•
Rename
: change the file name.
•
Lock
/
Unlock
: lock the file to prevent it from
being deleted, or unlock the file.
•
New folder
: add a new folder.
•
Details
: access the file properties.
•
Memory status
: access the memory
information for each folder in
File manager
.
Downloading sound clips
1. Select
More ringtones
. You are connected to
the preset website by your service provider.
2. Search for the file you want and follow the
onescreen instructions to download it.
Games & More
Use this menu to download Java games and
applications, and play them.
Playing a game
1. Select a game.
2. Follow the onscreen instructions.
Using Java game options
While viewing the game list, press <
Options
> to
access the following options:
•
Download
: connect to the preset web site.
•
Play
: launch the selected game.
•
Move
: move the file to another folder.
•
Delete
: delete the selected game or all games.
•
Rename file
: change the name of downloaded
game.
•
Lock
/
Unlock
: lock the game to prevent it from
being deleted, or unlock the game.
•
Details
: access the game properties.
Up/Down/
/
Adjusts the volume.
OK Allows you to send the selected file to
other people.
Keys Description
Menu functions
58
•
New folder
: add a new game folder.
•
Network settings
: activate a connection profile
to be used for accessing a Java server. You can
also create or edit a profile.
p. 76
•
Memory status
: access the memory
information for each folder in
File manager
.
Downloading new games
1. Select
More games
. You are connected to a
preset website by your service provider.
2. Search for a game and follow the onscreen
instructions to download it.
Other files
Files that you have received but which are not
supported by your phone are stored in this folder.
You cannot open these files on the phone.
Unsupported file formats are DOC, PPT, TXT and so
on.
Memory card
Use this menu to access the media files stored on
the memory card. This option is only available when
you insert a memory card into the phone.
For details about using files, see the corresponding
menu.
Organiser
(Menu 7)
The Organiser feature enables you to keep track of
your schedule and to set alarms. You can also use
convenient features, such as a world clock, a voice
recorder, a calculator, or converter.
To access this menu, press [
OK
] in Idle mode and
select
Organiser
.
Alarm
(Menu 7.1)
Use this menu to set alarms to sound at specific
times. The alert type for a normal alarm corresponds
to the call alert type settings in the currently
selected profile. A wake-up alarm does not be
affected by your profile setting.
Setting an alarm
1. Select the type of alarm.
2. Scroll to
On
on the
Alarm
line and press
[Down].
3. Enter the time for the alarm to sound and press
[Down].
4. Set the repeat option from the
Repeat
line.
5. Select the
Alert tone
line.
6. Select an alarm melody.
7. Press <
Options
> and select
Save
.
Stopping an alarm
When the time for an alarm comes and the alarm
sounds:
59
Menu functions
Organiser
(Menu 7)
• For a non-wake-up alarm, press any key.
• For a wake-up alarm, press <
OK
> or [
OK
].
Press any key, except for <
OK
> or [
OK
], to
cause it to sound again after 5 minutes.
Deactivating an alarm
When you do not need an alarm any longer, you can
deactivate it.
1. Select the alarm you want to deactivate.
2. Select
Off
on the
Alarm
line.
3. Press [
OK
].
Setting the alarm to sound when the phone
is off
From the Alarm screen, select
Auto power
→
On
.
If the phone is off when it is time for the alarm to
sound, the phone switches on and sounds the alarm.
Viewing a missed alarm event
When you are unable to acknowledge an alarm for
an event, the phone stores the missed alarm until
you confirm it.
From the Alarm screen, select
Missed event alarm
→
On
.
Calendar
(Menu 7.2)
Use this menu to keep track of your monthly
schedule.
Selecting a day on the calendar
When you enter the
Calendar
menu, the calendar
appears with today’s date indicated by a blue box.
• Press [Left] or [Right] to move by day.
• Press [Up] or [Down] to move by week.
• Press [
/
] to move by month.
Creating an item
You can store created items, anniversaries, tasks,
and memos on the calendar. More than one item per
day can be stored.
Entering a scheduled item
1. Select a date on the calendar.
2. Press <
Options
> and select
New
→
Schedule
.
3. Enter information or change the settings:
•
Title
: enter the title for the scheduled item.
•
Details
: enter the details of the scheduled
item.
•
Start
and
End
: enter the starting and ending
times for the scheduled item.
•
Start date
and
End date
: enter the starting
and ending dates for the scheduled item.
•
Location
: enter information about the
scheduled item.
•
Alarm
: set an alarm for the scheduled item.
•
before
: set how long before the scheduled
item the alarm is to alert you.
•
Repeat
: set the scheduled item to recur. You
can select a repeat unit.
•
until
: set the ending date, if the scheduled
item will recur.
•
Expiry
: set when the scheduled item will be
deleted from the calendar.
Menu functions
60
4. Press <
Options
> and select
Save
to save the
scheduled item.
Entering an anniversary
1. Select a date on the calendar.
2. Press <
Options
> and select
New
→
Anniversary
.
3. Enter information or change the settings:
•
Occasion
: enter information about the
anniversary.
•
Date
: enter the date.
•
Alarm
: set an alarm for the anniversary.
•
before
: set how long before the anniversary
the alarm is to alert you.
•
alarm time
: enter the time for the alarm to
ring.
•
Repeat every year
: set the phone to
remind you of the anniversary every year.
4. Press <
Options
> and select
Save
.
Entering a task
1. Select a date on the calendar.
2. Press <
Options
> and select
New
→
Task
.
3. Enter information or change the settings:
•
Title
: enter the title for the task.
•
Task
: enter task details.
•
Start date
: enter the starting date.
•
Due date
: enter the ending date.
•
Priority
: select a priority level.
4. Press <
Options
> and select
Save
.
Entering a memo
1. Select a date on the calendar.
2. Press <
Options
> and select
New
→
Memo
.
3. Enter the memo text and press [Down].
4. Enter the date.
5. Press <
Options
> and select
Save
.
Consulting the calendar
Once you have scheduled things, the square
brackets appear on the corner of the date cell.
Viewing an item
1. Select a date on the calendar to display the
items for the day.
2. Select an item to view its details.
The following icons indicate the types of items:
From the item list, press <
Options
> to access the
following options:
•
View
: access the selected item.
•
New
: add a new item.
•
Completed
/
To do
: change the status of the
selected task.
•
Month view
: switch to the monthly view screen.
•
Week view
: switch to the weekly view screen.
•
Change date
/
Change due date
/
Reschedule
:
change the date of the item.
•
Delete
: delete the selected item.
• Scheduled items • Anniversaries
• Tasks • Memos
61
Menu functions
Organiser
(Menu 7)
•
Delete all
: delete all of the items for the
selected day.
•
Send schedule
/
Send task
: send the item via
SMS, e-mail, file messenger, or Bluetooth.
•
Send memo
: send the memo via SMS.
Using calendar options
From the calendar, press <
Options
> to access the
following options:
•
View
: display the items stored for the selected
date.
•
New
: add a new scheduled item, anniversary,
task, or memo.
•
Week view
: display the weekly view screen.
•
Go to today
:
go to today’s date.
•
Go to date
:
enter a specific date.
•
Starting day
: set whether the calendar starts
with Sunday or Monday.
•
Delete
: delete the items for the specific period.
•
Delete all
: delete all of the items in the
calendar.
Week view
(Menu 7.3)
Use this menu to view items for the selected week.
The current date is marked in blue. Square brackets
on a calendar date indicate the types of items
scheduled for that day.
1. Scroll up to the date line and press [Left] or
[Right] to access another week.
2. Select the time cell that contains the item you
want.
Today’s events
(Menu 7.4)
Use this menu to view items for the selected date.
Select an item to view its details. The item opens in
Edit mode.
Schedule
(Menu 7.5)
This menu displays the scheduled items. If you have
set the Repeat and Alarm options, the and
icons display.
Select a scheduled item to view its details.
Anniversary
(Menu 7.6)
This menu displays anniversaries you have created.
If you have set the Repeat and Alarm options, the
and icons display.
Select an anniversary to view its details.
Task
(Menu 7.7)
Use this menu to display tasks you have created.
The icons on the right indicate the importance; the
lower the number on the icon, the higher the
priority. A check mark appears in the status check
box if the task has been completed.
Select a task to view its details.
Menu functions
62
Memo
(Menu 7.8)
This menu displays memos you have created.
Select a memo to view its details.
Voice memo
(Menu 7.9)
Use this menu to record voice memos. A voice
memo can be up to one hour long.
Recording a voice memo
1. Press [
OK
] to start recording.
2. Speak into the microphone.
Press [
OK
] to pause or resume the recording.
3. Press <
Stop
> or [Down]. The voice memo is
automatically saved.
4. Press [
OK
] to review the memo, or [Up] to
record additional memos.
Playing a voice memo
1. From the voice recorder screen, press
<
Options
> and select
Go to sounds
.
2. Select a voice memo from the
Voice memos
folder. The selected memo plays.
During playback, use the following keys:
Using voice recorder options
After playback, press <
Options
> to access the
following options:
•
Play
: play the selected voice memo in Review
mode.
•
Record
: record a new voice memo.
•
Send
: send the file via MMS, e-mail, file
messenger, or Bluetooth. You can also send the
file to the online media album, if provided.
•
Activate key
: get a new license key when the
key for the selected DRM file expires.
•
Reactivate key
: get another license key even
when the key for the selected DRM file has not
expired.
•
Go to sounds
: access the voice memo list.
•
Delete
: delete the file.
•
Rename
: change the file name.
•
Hidden from Bluetooth
: hide the file so that
other Bluetooth devices cannot access it.
•
Visible to Bluetooth
: share the file with other
Bluetooth devices.
•
Details
: access the file properties.
keys Function
OK Pauses or resumes playback.
Left Moves backward in a file.
Right Skips forward in a file.
/
Adjusts the volume.
Down Stops playback.
Up Switches to Review mode (
)
or back
to Record mode ( ).
keys Function
63
Menu functions
Organiser
(Menu 7)
•
Record settings
: customise the default settings
for the voice recorder:
Default name
: change the default prefix of file
names.
Recording time
:
select a maximum recording
time.
World clock
(Menu 7.0)
Use this menu to set your local time zone and check
the current time in another part of the world.
Setting the local time zone
1. From the world map, press [Left] or [Right] to
scroll to the city you want on the upper line ( ).
As the time line moves, the time and date of the
given zone display.
2. Press [
OK
] to save the time zone.
Viewing world time
1. From the world map, move to the lower line
().
2. Press [Left] or [Right] to scroll to the city you
want.
3. Press [
OK
] to save the time zone.
Applying Daylight Savings Time
1. From the world map, press <
Options
> and
select
Summer time
.
2. Press [
OK
] to check the time zones you want.
3. Press <
Select
>.
4. Press [
OK
] to save DST.
Math
(Menu 7.
*
)
Use this menu to use your phone as a calculator or
converter.
Calculator
(Menu 7.
*
.1)
Use this menu to perform basic arithmetic functions
such as addition, subtraction, multiplication, and
division.
Performing a calculation
1. Enter the first number.
Press [ ] to include a decimal point.
2. Enter the operation for your calculation by
pressing the Navigation keys.
3. Enter the second number.
4. Press [
OK
] to view the result.
Using calculator options
Press <
Options
> to access the following options:
•
Equal
: view the result.
•
Recent calculation
: display the last result you
calculated.
•
Save to memory
: save a value into the
calculator memory.
•
Recall memory
: retrieve the saved value.
•
Clear memory
: clear the saved values.
Converter
(Menu 7.
*
.2)
Use this menu for common conversions, such as
currency and temperature.
Menu functions
64
Performing a conversion
1. Select the converter type you want.
2. Press [Left] or [Right] to select the original unit
and press [Down].
3. Enter the value to be converted and press
[Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to
above zero (+) or below zero (-).
4. Press [Left] or [Right] to select the unit you want
to convert to.
The equivalent value for the amount you entered
displays.
Using converter options
Press <
Options
> to access the following options:
•
Clear
: clear the current values.
•
Reverse
: reverse the conversion.
•
Currency rates
: display the currency rate list.
Memory status
(Menu 7.#)
This menu displays the number of items of each type
you have created, and the total number of items you
can store.
My screen
(Menu
Data is required.
Camera
(Menu 8)
You can use the camera module embedded in your
phone to take photos and record videos. Using the
Camera
menu, you can turn on the camera.
To access this menu, press [
OK
] in Idle mode and
select
Camera
or press and hold [ ].
Taking a photo
The camera will produce JPEG photos.
Taking a photo with the phone open
1. Access the
Camera
menu to turn on the camera
and switch the display to Capture mode. You can
also press and hold [ ] in Idle mode.
2. Press [ ] to switch between the interior lens
below the display and the exterior lens on the
external of the phone.
3. Make any desired adjustments.
• Press < > to use the camera options.
next section
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras
are not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
When you take a photo in direct sunlight or in
bright conditions, shadows may appear on the
photo.
65
Menu functions
Camera
(Menu 8)
• Use the keypad to change the camera
settings or switch to other modes.
p. 66
4. Press [
OK
] to take a photo. The photo is saved in
the
Pictures
folder.
Using camera options in Capture mode
In Capture mode, press < > to access the
following options:
•
Take photo
: take a photo.
•
Record video
: switch to Record mode.
•
Switch camera
: switch between the interior
lens and the exterior lens.
•
Go to photos
: access the
Pictures
folder.
p. 53
•
Shooting mode
: take a photo in the following
modes:
Single shot
: take a photo in Normal mode. You
can select whether or not the camera
automatically saves a photo.
Multi shot
: take a series of action stills. You can
select the number of photos the camera will
take.
Mosaic shot
: take several stills and save them
in one frame. You can select the layout.
•
Effects
: change the colour tone of the image.
•
Frames
: apply a decorative frame.
•
Timer
: set a time delay before the camera takes
a photo.
•
Zoom
/
Hide zoom
: display the zoom control bar
and zoom in or out by pressing [Up] or [Down],
or hide the control bar.
•
Brightness
/
Hide brightness
: display the
brightness control bar and adjust the brightness
by pressing [Left] or [Right], or hide the control
bar.
•
Camera settings
: change the default settings
for taking a photo:
Default name
: change the default prefix of file
names.
Default storage
: select a memory location to
store photos, if a memory card is inserted.
Viewfinder
:
select a preview screen.
Shutter sound
: select a camera shutter sound.
Capture quality
:
select an image quality.
Image size
: select an image size.
Multi shot speed
: select the shooting speed in
Multi Shot mode.
5.
To Press
use photo options <
Options
> or < >.
p. 66
delete the photo <
Delete
> or < >,
and then <
Yes
>.
return to Capture mode [
OK
].
Menu functions
66
Spot metering
: adjust the exposure based on a
specific area of the image. Select
On
to display
the spot focus frame in the middle of the image,
and change the exposure according to the
brightness of the image fragment in the frame.
White balance
: adjust the colour balance of the
photo. You can make your photo appear warmer
or cooler.
•
Camera shortcuts
: view the functions of the
keys you can use in Capture mode.
Using the keypad in Capture mode
You can use the keypad to customise your camera
settings in Capture mode.
Using photo options
After saving a photo, press <
Options
> or < > to
access the following options:
•
Viewfinder
: return to Capture mode.
•
Send
: send the file via MMS, TIMClick, e-mail,
file messenger, or Bluetooth. You can also send
the file to the online media album, if provided.
•
Delete
: delete the file.
•
Set as
:
set the photo as wallpaper for displays,
or as a caller ID image for a Contacts entry.
•
Go to Photos
: access the
Pictures
folder.
p. 53
•
Rename
:
change the file name.
Taking a photo with the phone closed
1. Press and hold [ ].
• Press [ ] to flip the image vertically.
• Press [ ] to view the mirror image.
2. Press [ ] to take a photo. The photo is
automatically saved.
Key Function
Flips the image vertically.
Shows the mirror image.
Left/Right Adjusts the brightness.
Up/Down Zooms in or out. (Not available for
the maximum size)
1
Switches to Record mode.
p. 67
2
Changes the image size.
3
Changes the image quality.
4
Changes the shooting mode.
5
Changes the colour tone.
7
Selects a decorative frame.
8
Sets the timer.
0
Goes to the
Pictures
folder.
Changes the preview screen.
Key Function
67
Menu functions
Camera
(Menu 8)
Recording a video
You can record a video of what is displayed on the
camera screen and save it.
Recording a video
1. Access the
Camera
menu to turn on the camera
or press and hold [ ] in Idle mode.
2. Press [
1
] to switch to Record mode.
3. Press [ ] to switch between the interior lens
below the display and the exterior lens on the
external of the phone.
4. Make any desired adjustments.
• Press < > to use the camera options.
next section
• Use the keypad to change the camera
settings or switch to other modes.
p. 68
5. Press [
OK
] to start recording.
6. Press [
OK
] to stop recording. The video is
automatically saved in the
Videos
folder.
Using camera options in Record mode
In Record mode, press < > to access the following
options:
•
Record
: start recording.
•
Take photo
: switch to Capture mode.
•
Switch camera
: switch between the interior
lens or exterior lens.
•
Go to videos
:
access the
Videos
folder.
p. 55
•
Effects
:
change the colour tone of the image.
•
Zoom
/
Hide zoom
: display the zoom control bar
and zoom in or out by pressing [Up] or [Down],
or hide the control bar.
•
Brightness
/
Hide brightness
: display the
brightness control bar and adjust the brightness
by pressing [Left] or [Right], or hide the control
bar.
•
Video settings
: change the following settings
for recording a video:
Default name
: change the default prefix of file
names.
Default storage
: select a memory location to
store video clips, if a memory card is inserted.
Quality
: select an image quality.
Recording time
: select a video recording mode.
Select
Limit for
MMS
to record a video suitable
for an MMS message.
7.
To Press
use the video options <
Options
>.
p. 68
delete the video clip <
Delete
> or [
C
], and
then <
Yes
>.
return to Record mode [
OK
].
Menu functions
68
Select
Normal
to record a video within the limit
of the currently available memory. The length of
your video is determined by how much memory
has been used.
Size
: select a frame size.
Audio record
: turn the audio on or off.
•
Camcorder shortcuts
: view the functions of
the keys you can use in Record mode.
Using the keypad in Record mode
Using video options
After saving a video clip, press <
Options
> to access
the following options:
•
Play
:
play back the file.
•
Viewfinder
: return to Record mode.
•
Send
:
send the file via MMS, e-mail, file
messenger, or Bluetooth. You can also send the
file to the online media album, if provided.
•
Delete
: delete the file.
•
Go to Videos
: access the
Videos
folder.
p. 55
•
Rename
: change the file name.
Settings
(Menu 9)
The
Settings
menu provides you with various
setting options to customise the phone to your
preferences and needs. You can also reset the
settings to their default status.
To access this menu, press [
OK
] in Idle mode and
select
Settings
.
Profiles
(Menu 9.1)
Your phone provides you with sound profiles that
allow you to quickly and easily change the sound
settings of the phone for different events or
situations. Use this menu to adjust the properties of
each profile and activate the profile you need.
Key Function
Flips the image vertically.
Shows the mirror image.
Left/Right Adjusts the brightness.
Up/Down Zooms in or out.
1
Switches to Capture mode.
p. 64
2
Changes the frame size.
3
Changes the image quality.
4
Changes the video recording mode.
5
Changes the colour tone of the
image.
7
Mutes or unmutes audio.
0
Goes to the
Videos
folder.
69
Menu functions
Settings
(Menu 9)
Editing a profile
1. Scroll to the profile you want.
2. Press <
Options
> and select
Edit
.
3. Change the sound settings:
•
Call alert type
: select an alert type for the
call ringer.
•
Voice call ringtone
: select a ringtone for
the call ringer of voice calls.
•
Video call ringtone
: select a ringtone for
the call ringer of video calls.
•
Tone volume
: adjust the volume for the call
ringer.
•
Message alert type
: select an alert type for
the message ringer.
•
Message alert tone
: select a ringtone for
the message ringer.
•
Message alert repetition
: select if the
phone repeatedly reminds you of a new
message.
•
Phone sounds
: turn the various sounds on
the phone on or off:
All on
: enable all tones.
Popup box alerts
: set the phone to beep
when a pop-up window displays.
Minute minder
: set the phone to beep
every minute during an outgoing call to keep
you informed of the length of your call.
Call connect tone
: set the phone to beep
when a call is connected to the system.
Call end tone
: set the phone to beep when a
call is disconnected by the other person or
the faded signal.
Power on/off
: set the phone to beep when
you turn on the phone.
Folder open/close
: set the phone to sound
when you open or close the phone.
Alerts on call
: set the phone to beep when
you receive a new message or when the time
for an alarm comes during a call.
•
Key tones
: select a tone which sounds when
you press a key.
•
Key tone volume
: adjust the volume of the
key tones.
•
Call answer mode
: (For Car) select how to
answer an incoming call.
4. When you have finished, press <
Options
> and
select
Save
.
Changing an active profile
From the profile list, select the profile you want.
Time & date
(
Menu
9.2)
Use this menu to change the time and date
displayed on your phone. Before setting the time
and date, specify your time zone in the
World clock
menu.
p. 63
•
Time
: enter the current time.
•
Date
:
enter the current date.
•
Time format
: select a time format.
Menu functions
70
•
Date format
:
select a date format.
•
Summer time
: select to apply daylight savings
time.
•
Auto update
: select to receive time information
from your network.
Phone
(Menu 9.3)
Many different features of your phone’s system can
be customised to suit your preferences.
Language
(Menu 9.3.1)
Use this menu to select a languages for the display
text or T9 input mode.
Shortcuts
(Menu 9.3.2)
You can use the Navigation keys as shortcut keys to
access specific menus directly from Idle mode. Use
this menu to assign a shortcut to a key.
Assigning a shortcut menu
1. Select a key to be used as a shortcut key.
2. Select the menu to be assigned to the key.
Using the shortcut options
On the Shortcuts screen, press <
Options
> to
access the following options:
•
Assign
: assign a shortcut menu to an empty
location.
•
Change
: change a shortcut assignment.
•
Remove
: deactivate the shortcut assignment to
the selected key.
•
Remove all
: deactivate all shortcut
assignments.
Active folder
(Menu 9.3.3)
Use this menu to answer incoming calls by opening
the phone.
Anykey answer
(Menu 9.3.4)
Use this menu to answer an incoming call by
pressing any key, except for <
Reject
> and [ ].
Volume key
(Menu 9.3.5)
Use this menu to set whether the phone mutes the
call ringer or rejects a call if you press and hold
[
/
] when a call comes in.
Key management
(Menu 9.3.6)
Use this menu to manage the licence keys you have
acquired to activate media contents locked by DRM
systems.
Press <
Options
> to access the following options:
•
View
: open the corresponding media item.
•
Delete
: delete the selected licence key.
•
Go to My Messages
: access the message that
contains the media content.
•
Go to File manager
: access the corresponding
file folder.
•
Details
: access the properties of the licence key.
Cover keypad lock
(Menu 9.3.7)
Use this menu to lock the exposed keys to keep
accidental presses from affecting your phone’s
operation when the phone is closed.
71
Menu functions
Settings
(Menu 9)
Display
(Menu 9.4)
Use this menu to change settings for the display.
Greeting message
(Menu 9.4.1)
Use this menu to enter the greeting that is displayed
on the main display or external display.
Wallpaper
(Menu 9.4.2)
You can change the background image that is
displayed on the main display.
Cover LCD
(Menu 9.4.3)
Use this menu to select an image or text to be
displayed on the external display.
•
Clock
: select a clock type.
•
Cover title
: enter the text you want.
•
Wallpaper
: press <
Change
> and select an
image. If necessary, select the portion of the
image to be displayed.
LCD brightness
(Menu 9.4.4)
Use this menu to adjust the brightness of the main
display for varing lighting conditions.
Backlight
(Menu 9.4.5)
You can select the length of time the backlight or
display stays on.
•
On
: select the length of time the backlight stays
on in times of inactivity.
•
Dim
: select the length of time the display stays
on in Dim mode after the backlight turns off.
After a specified time, the display turns off.
Dialling display
(Menu 9.4.6)
Use this menu to select a font type, font size and
colour for the numbers entered and background
colour of the display while dialling.
Call
(Menu 9.5)
Use this menu to set options for call functions.
Caller ID
(Menu 9.5.1)
This network service allows you to hide your phone
number from being displayed on the phone of the
person being called. If you select
By network
, the
phone will use the default setting provided by the
network.
Diverting
(Menu 9.5.2)
This network service reroutes incoming calls to a
different phone number that you specify.
1. Select the type of calls to be diverted.
2. Select a call diverting option:
•
Always
: divert all calls.
•
Busy
: divert calls when you are on another
call.
•
No
reply
: divert calls when you do not
answer the phone.
•
Unreachable
: divert calls when you are not
in an area covered by your service provider
or when your phone is switched off.
Some networks do not allow the user to change
this setting.
Menu functions
72
•
Cancel
all
: cancel all call diverting options.
3. Enter the number to which the calls will be
diverted in the
Divert to
line.
4. If you selected
No reply
, move to the
Waiting
time
line and select the length of time the
network delays before diverting a call.
5. Press <
Options
> and select
Activate
. To
deactivate the call diverting, select
Deactivate
.
Barring
(Menu 9.5.3)
This network service allows you to restrict your calls.
1. Select the type of calls to be barred.
2. Select a call barring option:
•
All
outgoing calls
: prohibit all outgoing
calls.
•
Outgoing int’l calls
: prohibit international
calls.
•
Int’l calls exc. Home
: only allow calls to
numbers within the current country when you
are abroad, and to your home country.
•
All
incoming calls
: prohibit incoming calls.
•
Incoming calls when roaming
: prohibit
incoming calls when you use your phone
outside of your home country.
•
Cancel
all
: cancel all call barring settings,
allowing calls to be sent and received
normally.
3. Enter the call barring password supplied by your
service provider.
4. Press <
Options
> and select
Activate
. To
deactivate the call barring, select
Deactivate
.
Waiting
(Menu 9.5.4)
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which the call waiting
option will apply.
2. Press <
Options
> and select
Activate
. To
deactivate the call waiting, select
Deactivate
.
Auto redial
(Menu 9.5.5)
Use this menu to make up to ten attempts to redial
a phone number after an unsuccessful call.
Closed user group
(Menu 9.5.6)
Use this menu to set incoming and outgoing calls to
be restricted to a selected user group. For details
about how to create a closed user group, contact
your service provider.
•
Use user group
: activate CUG index numbers.
•
Outside access
: enable calls to numbers other
than those in the Closed user group. This feature
depends on the nature of your CUG subscription.
You can change the call barring password
obtained from your service provider. From the call
type list, press <
Options
> and select
Change
password
.
73
Menu functions
Settings
(Menu 9)
•
Default group
: enable the default CUG, if you
have set one with your service provider. When
making a call, you are given the option of using
your default CUG, instead of selecting one from
the list.
•
Group index
: add, delete, or activate CUG
index numbers.
Video call
(Menu 9.5.7)
Use this menu to change the default settings for
using the video call feature.
•
Show me
: change the video camera settings for
receipt of video calls:
Optionally
: you can select whether or not the
video camera is used each time you answer a
video call.
Always
: the camera is always used.
•
Retry by
: set what to do when a video call does
not connect:
Voice call
: the phone retries with a voice call.
Multimedia message
: the phone will turn on
the camera and switch to Record mode so that
you can record a video and send it as an MMS
message.
None
: the phone does not retry.
Connectivity
(Menu 9.6)
Use this menu to set options for connection available
on your phone.
Bluetooth
(Menu 9.6.1)
Using Bluetooth wireless, you can connect the phone
wirelessly to other Bluetooth devices and exchange
data with them, talk hands-free, or control the
phone remotely.
Bluetooth technology allows free wireless
connections between all Bluetooth-compliant
devices within a range of 10 metres. Since the
devices communicate using radio waves, they do not
need to be in line of sight to each other.
• If there are obstacles between the devices,
the
operating distance may be reduced.
• It is recommended that you do not use the
Bluetooth feature while using multimedia
features, such as voice recorder, camera,
and
media player, or vice versa, for the better
performance.
• Some devices may not be compatible with
your
phone.
Menu functions
74
Setting up the Bluetooth feature
The
Bluetooth
menu provides the following
options:
•
Activation
: activate or deactivate the Bluetooth
feature.
•
My device
:
search for connectable Bluetooth
devices.
•
My phone’s visibility
: allow other Bluetooth
devices to connect to your phone.
•
My phone’s name
: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
•
Secure mode
: determine if the phone asks for
your confirmation when other devices access
your data.
•
Bluetooth service
: display available Bluetooth
services.
Searching for and pairing with a Bluetooth
device
1. From the Bluetooth setting options, select
My
devices
.
2. Select
Search new device
.
After searching, a list of devices to which you can
connect displays. The following icons indicate the
type of device:
• Hands-free car kit or headset
• Mobile phone
• Computer
• PDA
• Unknown device
• Printer
The colour of the icon indicates the status of the
device:
• Grey for unpaired devices
• Blue for paired devices
• Red for devices that are currently connected
to your phone
3. Select a device.
4. Enter a Bluetooth PIN and press <
OK
>.
This
code is used just once and you do not need to
memorise it.
When the owner of the other device enters the
same code, pairing is finished.
Using device options
From the device list, press <
Options
> to access the
following options:
•
Connect
: connect to a headset or hands-free car
kit.
•
Disconnect
: end the connection with the
connected headset or hands-free car kit.
•
Browse device
: search for data from the device
and import data directly to your phone.
Some devices, especially headsets or hands-free
car kits, may have a fixed Bluetooth PIN, such as
0000
. If the other device has one, you must
enter the code.
75
Menu functions
Settings
(Menu 9)
•
Authorise device
/
Unauthorise device
:
determine whether or not the phone asks you to
permit connection when other devices try to
connect to your phone.
•
Delete
: remove the selected device or all
devices from the list.
•
Rename
: rename the selected device.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item you want
to send is stored.
3. Scroll to the item you want and press
<
Options
>.
4. Select
Send
→
Via
bluetooth
.
The phone searches for devices within range and
displays a list of available devices.
5. Select a device.
6. If necessary, enter the Bluetooth PIN needed for
pairing and press <
OK
>.
Receiving data via Bluetooth
To receive data via Bluetooth, your phone’s
Bluetooth feature must be active.
If an unauthorised Bluetooth device sends data to
your phone, the phone displays a confirmation
message.
To receive data, press <
Yes
>.
Network
(Menu 9.6.2)
Use this menu to change the settings for connecting
to your cellular network.
•
Network selection
: select to either
automatically or manually select the network
used when roaming outside of your home area.
You can select a network other than your home
network only if there is a valid roaming
agreement between the two.
•
Network mode
: select the network you use:
Automatic
: the phone scans for available
networks.
GSM 900/1800
: the phone operates in the
combined GSM 900/1800 network.
GSM 1900
: the phone operates in the GSM
1900 network. This option is only available in the
U.S.A.
UMTS
: the phone operates in UMTS (3G
network) networks. You can get a higher speed
quality than on lower generation networks, and
use advanced data and information services,
such as video calls.
Menu functions
76
Connections
(Menu 9.6.3)
Use this menu to create and customise the profiles
containing the settings for connecting your phone to
the network. You need these settings to use the web
browser or send MMS messages or e-mails.
Creating a profile
1. Press <
New
>, or press <
Options
> and select
New
.
2. Specify profile parameters:
•
Set name
: enter a profile name.
•
Access name
: edit the access point name
used for the address of the GPRS network
gateway.
•
Auth type
: choose the type of
authentication used.
•
User ID
: enter the user ID.
•
Password
: enter the user password.
•
Protocol
: select the protocol from among
WAP
,
HTTP
, and
Other
.
•
Home URL
: enter the URL address of the
page to be used as your homepage.
•
Gateway address
: (WAP only) enter the
gateway address of the proxy server.
•
Proxy address
/
Port
: (HTTP only) set the
proxy server address and port.
•
Secure connection
: (WAP only) turn the
secure mode on or off.
•
Linger time (sec.)
: set a time period after
which the network is disconnected if there
has been no new data traffic in that time.
•
Advanced settings
:
provide you with the
following options:
Static IP
: specify if you want to manually
enter an IP address; see the Local phone IP
option. If you want the IP address to be
automatically assigned by the server, remove
the check mark.
Local phone IP
: enter the IP address
obtained from the network operator, if you
checked the Static IP option.
Static DNS
: specify if you want to manually
enter the Domain Name Server (DNS)
address; see the
Server 1
/
Server 2
option.
If you want the address to be automatically
assigned by the server, remove the check
mark.
Server 1
/
Server 2
: enter the Domain Name
Server (DNS) addresses.
Traffic class
: select the traffic class.
3. Press <
Save
> to save the profile.
Your phone is suited for connecting to the
network by default. If you change the settings
without first checking with your service provider,
the web browser, MMS, and e-mail features may
not work properly.
77
Menu functions
Settings
(Menu 9)
Using profile options
From the profile list, press <
Options
> to access the
following options:
•
Edit
: edit the selected profile.
•
New
: add a new profile.
•
Rename
: change the profile name.
•
Delete
: delete the profile.
•
Restore
: restore the changed settings to the
default status.
Application settings
(Menu 9.7)
You can customise the settings for using applications
available on the phone.
Internet
(Menu 9.7.1)
Use this menu to select a connection profile to be
used for accessing the Internet. You can also create
or edit a profile.
p. 76
Messages
(Menu 9.7.2)
Use this menu to change the default settings for
using the message feature.
p. 49
Contacts
(Menu 9.7.3)
Use this menu to change the settings for using
Contacts.
p. 35
Camera
(Menu 9.7.4)
Use this menu to change the default settings for
taking photos.
p. 65
Video recorder
(Menu 9.7.5)
Use this menu to change the default settings for
recording video clips.
p. 67
Voice recorder
(Menu 9.7.6)
Use this menu to change the default settings for the
voice recorder.
p. 63
Media player
(Menu 9.7.7)
Use this menu to change the default settings for
playing media files in the media player.
p. 37
VOD
(Menu 9.7.8)
Use this menu to activate a connection profile to be
used for accessing streaming servers to use VOD
(Video on Demand) services. You can also create or
edit a profile.
p. 76
Security
(Menu 9.8)
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and USIM/SIM card.
You cannot edit or delete the default connection
profiles.
If you enter an incorrect PIN/PIN2 three times in
succession, the USIM/SIM card is blocked. To
unblock it, you need to enter your PUK/PUK2
(Personal Unblocking Key). The codes are
supplied by your network operator.
Menu functions
78
Phone lock
(Menu 9.8.1)
Use this menu to protect the phone from
unauthorised use. When this feature is enabled, you
must enter a 4- to 8-digit phone password each time
the phone is switched on.
The password is preset to
00000000
. To change the
password, use the
Change phone password
menu.
SIM lock
(Menu 9.8.2)
This menu allows your phone to work only with the
current USIM/SIM by assigning a USIM/SIM lock
code. You must enter the USIM/SIM lock code to use
a different USIM/SIM card.
PIN lock
(Menu 9.8.3)
The 4- to 8-digit PIN (Personal Identification
Number) protects your USIM/SIM card against
unauthorised use. When this feature is enabled, the
phone requires your PIN each time it is switched on.
Fixed dialling mode
(Menu 9.8.4)
If supported by your USIM/SIM card, Fixed Dialling
Number (FDN) mode restricts your outgoing calls to
a limited set of phone numbers. When this feature is
enabled, you can make calls only to phone numbers
stored on the USIM/SIM card.
Change phone password
(Menu 9.8.5)
Use this menu to change your phone password.
Privacy lock
(Menu 9.8.6)
Use this menu to lock access to messages, media
files, call records, or Contacts entries. When a lock
option is enabled, you must enter the phone
password to access the locked items.
Change PIN code
(Menu 9.8.7)
Use this menu to change your PIN. The PIN lock
feature must be enabled to change the PIN.
Change PIN2 code
(Menu 9.8.8)
If supported by your USIM/SIM card, use this menu
to change your current PIN2.
Memory status
(Menu 9.9)
Use this menu to check the amount of memory
being used for storing data, such as Text message,
Multimedia message, Email, Push message, File
manager, Contacts, and Organiser items. You can
also view the amount of a memory card, if inserted
into the phone.
Reset settings
(Menu 9. )
Use this menu to reset the phone’s settings you
have changed and clear all data you have added.
1. Enter the phone password and press
<
Confirm
>.
2. Press <
Yes
>. The phone automatically turns
itself off and then back on.
The password is preset to
00000000
. You
can change this password.
p. 78
79
Solve problems
Help and personal needs
To save the time and expense of an unnecessary
service call, perform the simple checks in this
section before contacting a service professional.
When you switch on your phone, the following
messages may appear:
“Please insert SIM card”
• Be sure that the USIM/SIM card is correctly
installed.
“Phone lock”
• The automatic locking function has been
enabled. You must enter the phone’s password
before you can use the phone.
“PIN lock”
• You are using your phone for the first time. You
must enter the PIN supplied with the USIM/SIM
card.
• The PIN lock feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the
PIN lock
menu.
“PUK lock”
• The PIN code was entered incorrectly three times
in succession, and the USIM/SIM card is now
blocked. Enter the PUK supplied by your service
provider.
“No service,” “Network failure,” or “Not done”
displays
• The network connection has been lost. You may
be in a weak signal area. Move and try again.
• You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
You have entered a number but it was not
dialled
• Be sure that you have pressed [ ].
• Be sure that you have accessed the right cellular
network.
• Be sure that you have not set an outgoing call
barring option.
Your correspondent cannot reach you
• Be sure that your phone is switched on. ([ ]
pressed for more than one second.)
• Be sure that you are accessing the correct
cellular network.
• Be sure that you have not set an incoming call
barring option.
Your correspondent cannot hear you speaking
• Be sure that you have switched on the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is
located at the bottom of the phone.
80
The phone starts beeping and “Low battery”
flashes on the display
• Your battery is insufficiently charged. Recharge
the battery.
The audio quality of the call is poor
• Check the signal strength indicator on the
display ( ). The number of bars indicates the
signal strength from strong ( ) to weak ( ).
• Try moving the phone slightly or moving closer
to a window if you are in a building.
No number is dialled when you re-call a
Contacts entry
•Use the
Search contact
feature to ensure the
number has been stored correctly.
• Re-store the number, if necessary.
The battery doesn’t charge properly or the
phone sometimes turns itself off
• Wipe the charging contacts both on the phone
and on the battery with a clean soft cloth.
If the above guidelines do not help you to solve
the problem, take note of:
• The model and serial numbers of your phone
•Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung after-
sales service.
Health and safety information
81
Health and safety information
Exposure to Radio Frequency (RF)
Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and
receiver. It is designed and manufactured not to
exceed the exposure limits for radio frequency (RF)
energy set by the Federal Communications
Commission (FCC) of the U.S. government. These
FCC exposure limits are derived from the
recommendations of two expert organizations, the
National Counsel on Radiation Protection and
Measurement (NCRP) and the Institute of Electrical
and Electronics Engineers (IEEE). In both cases, the
recommendations were developed by scientific and
engineering experts drawn from industry,
government, and academia after extensive reviews
of the scientific literature related to the biological
effects of RF energy.
The exposure limit set by the FCC for wireless
mobile phones employs a unit of measurement
known as the Specific Absorption Rate (SAR). The
SAR is a measure of the rate of absorption of RF
energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires
wireless phones to comply with a safety limit of 1.6
watts per kilogram (1.6 W/kg). The FCC exposure
limit incorporates a substantial margin of safety to
give additional protection to the public and to
account for any variations in measurements.
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power
levels so as to use only the power required to reach
the network. In general, the closer you are to a
wireless base station antenna, the lower the power
output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC
that it does not exceed the limit established by the
FCC. Tests are performed in positions and locations
(e.g. at the ear and worn on the body) as required
by the FCC.
82
Health and safety information
The highest SAR values for this model phone as
reported to the FCC are Head: 0.126W/Kg, Body-
worn: 0.322W/Kg.
For body worn operations, this model phone has
been tested and meets the FCC RF exposure
guidelines when used with a Samsung accessory
designated for this product or when used with an
accessory that contains no metal and that positions
the handset a minimum 1.5 cm from the body.
Non-compliance with the above restrictions may
result in violation of FCC RF exposure guidelines.
SAR information on this and other model phones can
be viewed on-line at www.fcc.gov/oet/fccid. This site
uses the phone FCC ID number, A3LSGHZ560.
Sometimes it may be necessary to remove the
battery pack to find the number. Once you have the
FCC ID number for a particular phone, follow the
instructions on the website and it should provide
values for typical or maximum SAR for a particular
phone. Additional product specific SAR information
can also be obtained at www.fcc.gov/cgb/sar.
Consumer Information on Wireless
Phones
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
from wireless phones. The FDA publication includes
the following information:
What kinds of phones are the subject of this
update?
The term wireless phone refers here to hand-held
wireless phones with built-in antennas, often called
“cell,” “mobile,” or “PCS” phones. These types of
wireless phones can expose the user to measurable
radio frequency energy (RF) because of the short
distance between the phone and the user's head.
These RF exposures are limited by Federal
Communications Commission safety guidelines that
were developed with the advice of FDA and other
federal health and safety agencies. When the phone
is located at greater distances from the user, the
exposure to RF is drastically lower because a
person's RF exposure decreases rapidly with
increasing distance from the source. The so-called
“cordless phones,” which have a base unit connected
to the telephone wiring in a house, typically operate
at far lower power levels, and thus produce RF
exposures well within the FCC's compliance limits.
Do wireless phones pose a health hazard?
Health and safety information
83
The available scientific evidence does not show that
any health problems are associated with using
wireless phones. There is no proof, however, that
wireless phones are absolutely safe. Wireless
phones emit low levels of radio frequency energy
(RF) in the microwave range while being used. They
also emit very low levels of RF when in the stand-by
mode. Whereas high levels of RF can produce health
effects (by heating tissue), exposure to low level RF
that does not produce heating effects causes no
known adverse health effects. Many studies of low
level RF exposures have not found any biological
effects. Some studies have suggested that some
biological effects may occur, but such findings have
not been confirmed by additional research. In some
cases, other researchers have had difficulty in
reproducing those studies, or in determining the
reasons for inconsistent results.
What is FDA's role concerning the safety of
wireless phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as
wireless phones before they can be sold, as it does
with new drugs or medical devices. However, the
agency has authority to take action if wireless
phones are shown to emit radio frequency energy
(RF) at a level that is hazardous to the user. In such
a case, FDA could require the manufacturers of
wireless phones to notify users of the health hazard
and to repair, replace or recall the phones so that
the hazard no longer exists.
Although the existing scientific data do not justify
FDA regulatory actions, FDA has urged the wireless
phone industry to take a number of steps, including
the following:
• “Support needed research into possible biological
effects of RF of the type emitted by wireless
phones;
• “Design wireless phones in a way that minimizes
any RF exposure to the user that is not
necessary for device function; and
• “Cooperate in providing users of wireless phones
with the best possible information on possible
effects of wireless phone use on human health.
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at
84
Health and safety information
the federal level. The following agencies belong to
this working group:
• “National Institute for Occupational Safety and
Health
• “Environmental Protection Agency
• “Federal Communications Commission
• “Occupational Safety and Health Administration
• “National Telecommunications and Information
Administration
The National Institutes of Health participates in
some interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications
Commission (FCC). All phones that are sold in the
United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA
and other health agencies for safety questions about
wireless phones.
FCC also regulates the base stations that the
wireless phone networks rely upon. While these
base stations operate at higher power than do the
wireless phones themselves, the RF exposures that
people get from these base stations are typically
thousands of times lower than those they can get
from wireless phones. Base stations are thus not the
primary subject of the safety questions discussed in
this document.
What are the results of the research done
already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws
in their research methods. Animal experiments
investigating the effects of radio frequency energy
(RF) exposures characteristic of wireless phones
have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies,
however, have suggested that low levels of RF could
accelerate the development of cancer in laboratory
animals. However, many of the studies that showed
increased tumor development used animals that had
been genetically engineered or treated with cancer-
causing chemicals so as to be pre-disposed to
develop cancer in absence of RF exposure. Other
studies exposed the animals to RF for up to 22 hours
per day. These conditions are not similar to the
conditions under which people use wireless phones,
so we don't know with certainty what the results of
such studies mean for human health.
Three large epidemiology studies have been
published since December 2000. Between them, the
studies investigated any possible association
between the use of wireless phones and primary
brain cancer, glioma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland,
leukemia, or other cancers. None of the studies
demonstrated the existence of any harmful health
effects from wireless phones RF exposures.
However, none of the studies can answer questions
about long-term exposures, since the average
Health and safety information
85
period of phone use in these studies was around
three years.
What research is needed to decide whether
RF exposure from wireless phones poses a
health risk?
A combination of laboratory studies and
epidemiological studies of people actually using
wireless phones would provide some of the data that
are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large
numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one
exists. Epidemiological studies can provide data that
is directly applicable to human populations, but ten
or more years' follow-up may be needed to provide
answers about some health effects, such as cancer.
This is because the interval between the time of
exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many
years. The interpretation of epidemiological studies
is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones.
Many factors affect this measurement, such as the
angle at which the phone is held, or which model of
phone is used.
What is FDA doing to find out more about the
possible health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
FDA has been a leading participant in the World
Health Organization international Electromagnetic
Fields (EMF) Project since its inception in 1996. An
influential result of this work has been the
development of a detailed agenda of research needs
that has driven the establishment of new research
programs around the world. The Project has also
helped develop a series of public information
documents on EMF issues.
FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative
Research and Development Agreement (CRADA) to
do research on wireless phone safety. FDA provides
the scientific oversight, obtaining input from experts
in government, industry, and academic
organizations. CTIA-funded research is conducted
through contracts to independent investigators. The
initial research will include both laboratory studies
and studies of wireless phone users. The CRADA will
also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What steps can I take to reduce my exposure
to radio frequency energy from my wireless
phone?
If there is a risk from these products - and at this
point we do not know that there is - it is probably
very small. But if you are concerned about avoiding
86
Health and safety information
even potential risks, you can take a few simple steps
to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much
exposure a person receives, reducing the amount of
time spent using a wireless phone will reduce RF
exposure.
• “If you must conduct extended conversations by
wireless phone every day, you could place more
distance between your body and the source of
the RF, since the exposure level drops off
dramatically with distance. For example, you
could use a headset and carry the wireless phone
away from your body or use a wireless phone
connected to a remote antenna.
Again, the scientific data do not demonstrate that
wireless phones are harmful. But if you are
concerned about the RF exposure from these
products, you can use measures like those described
above to reduce your RF exposure from wireless
phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to
users of wireless phones, including children and
teenagers. If you want to take steps to lower
exposure to radio frequency energy (RF), the
measures described above would apply to children
and teenagers using wireless phones. Reducing the
time of wireless phone use and increasing the
distance between the user and the RF source will
reduce RF exposure.
Some groups sponsored by other national
governments have advised that children be
discouraged from using wireless phones at all. For
example, the government in the United Kingdom
distributed leaflets containing such a
recommendation in December 2000. They noted
that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their
recommendation to limit wireless phone use by
children was strictly precautionary; it was not based
on scientific evidence that any health hazard exists.
Do hands-free kits for wireless phones
reduce risks from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason
to believe that hands-free kits reduce risks. Hands-
free kits can be used with wireless phones for
convenience and comfort. These systems reduce the
absorption of RF energy in the head because the
phone, which is the source of the RF emissions, will
not be placed against the head. On the other hand,
if the phone is mounted against the waist or other
part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones
marketed in the U.S. are required to meet safety
requirements regardless of whether they are used
against the head or against the body. Either
configuration should result in compliance with the
safety limit.
Health and safety information
87
Do wireless phone accessories that claim to
shield the head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason
to believe that accessories that claim to shield the
head from those emissions reduce risks. Some
products that claim to shield the user from RF
absorption use special phone cases, while others
involve nothing more than a metallic accessory
attached to the phone. Studies have shown that
these products generally do not work as advertised.
Unlike “hand-free” kits, these so-called “shields”
may interfere with proper operation of the phone.
The phone may be forced to boost its power to
compensate, leading to an increase in RF
absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold
devices that claimed to protect wireless phone users
from radiation with making false and
unsubstantiated claims. According to FTC, these
defendants lacked a reasonable basis to substantiate
their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones
can interact with some electronic devices. For this
reason, FDA helped develop a detailed test method
to measure electromagnetic interference (EMI) of
implanted cardiac pacemakers and defibrillators
from wireless telephones. This test method is now
part of a standard sponsored by the Association for
the Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by FDA,
medical device manufacturers, and many other
groups, was completed in late 2000. This standard
will allow manufacturers to ensure that cardiac
pacemakers and defibrillators are safe from wireless
phone EMI. FDA has tested wireless phones and
helped develop a voluntary standard sponsored by
the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and
performance requirements for hearing aids and
wireless phones so that no interference occurs when
a person uses a compatible phone and a compatible
hearing aid at the same time. This standard was
approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones
for possible interactions with other medical devices.
Should harmful interference be found to occur, FDA
will conduct testing to assess the interference and
work to resolve the problem.
Additional information on the safety of RF exposures
from various sources can be obtained from the
following organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
88
Health and safety information
Settings
• Occupational Safety and Health Administration's
(OSHA):
http://www.osha.gov/SLTC/
radiofrequencyradiation/index.html
• National institute for Occupational Safety and
Health (NIOSH):
http://www.cdc.gov/niosh/emfpg.html
• World health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing
Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.nrpb.org.uk
• Updated 4/3/2002: US food and Drug
Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime.
But an important responsibility accompanies the
benefits of wireless phones, one that every user
must uphold.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, practice good common
sense and remember the following tips:
1. Get to know your wireless phone and its
features, such as speed dial and redial. If
available, these features help you to place your
call without taking your attention off the road.
2. When available, use a hands-free device. If
possible, add an additional layer of convenience
and safety to your wireless phone with one of the
many hands free accessories available today.
Health and safety information
89
3. Position your wireless phone within easy reach.
Be able to access your wireless phone without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your
voice mail answer it for you.
4. Let the person you are speaking with know you
are driving; if necessary, suspend the call in
heavy traffic or hazardous weather conditions.
Rain, sleet, snow, ice and even heavy traffic can
be hazardous.
5. Do not take notes or look up phone numbers
while driving. Jotting down a “to do” list or
flipping through your address book takes
attention away from your primary responsibility,
driving safely.
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car
will be stationary. If you need to make a call
while moving, dial only a few numbers, check the
road and your mirrors, then continue.
7. Do not engage in stressful or emotional
conversations that may be distracting. Make
people you are talking with aware you are
driving and suspend conversations that have the
potential to divert your attention from the road.
8. Use your wireless phone to call for help. Dial 9-1-
1 or other local emergency number in the case of
fire, traffic accident or medical emergencies.
Remember, it is a free call on your wireless
phone!
9. Use your wireless phone to help others in
emergencies. If you see an auto accident, crime
in progress or other serious emergency where
lives are in danger, call 9-1-1 or other local
emergency number, as you would want others to
do for you.
10. Call roadside assistance or a special non-
emergency wireless assistance number when
necessary. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal,
a minor traffic accident where no one appears
injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-
emergency number.
“The wireless industry reminds you to use your
phone safely when driving.”
For more information, please call 1-888-901-SAFE,
or visit our web-site www.wow-com.com
90
Health and safety information
Settings
Provided by the Cellular Telecommunications &
Internet Association
Operating Environment
Remember to follow any special regulations in force
in any area and always switch your phone off
whenever it is forbidden to use it, or when it may
cause interference or danger. When connecting the
phone or any accessory to another device, read its
user's guide for detailed safety instructions. Do not
connect incompatible products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
Using Your Phone Near Other Electronic
Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker.
These recommendations are consistent with the
independent research and recommendations of
Wireless Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone
is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to
minimize potential interference.
If you have any reason to suspect that interference
is taking place, switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you
in obtaining this information. Switch your phone off
in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
Health and safety information
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should
also consult the manufacturer of any equipment that
has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted
notices require you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded
of the need to observe restrictions on the use of
radio equipment in fuel depots (fuel storage and
distribution areas), chemical plants or where
blasting operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical emergencies,
for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 911 or other official
emergency number). Emergency numbers vary
by location.
3. Press .
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
91
Health and safety information
Settings
Consult this document and your local cellular service
provider.
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not cut off the call until given
permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be
allowed to play with it because they could hurt
themselves and others, damage the phone or make
calls that increase your phone bill.
.
The phone may cause TV or radio interference if
used in close proximity to receiving equipment.
The FCC can require you to stop using the phone
if such interference cannot be eliminated.
Vehicles using liquefied petroleum gas (such as
propane or butane) must comply with the National
Fire Protection Standard (NFPA-58). For a copy of
this standard, contact the National Fire Protection
Association, One Battery march Park, Quincy, MA
02269, Attn: Publication Sales Division.
Cautions
Changes or modifications made in the radio phone, not
expressly approved by Samsung, will void the user’s
authority to operate the equipment.
.
92
FCC Notice and Cautions
FCC Notice
• This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
• This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment
and receiver.
-Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV
technician for help
Health and safety information
Only use approved batteries, antennas and
chargers. The use of any unauthorized accessories
may be dangerous and void the phone warranty if
said accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex
piece of equipment and can be broken. Avoid dropping,
hitting, bending or sitting
on it.
Product Performance
Getting the Most Out of Your Signal
Reception
The quality of each call you make or receive depends
on the signal strength in your area. Your phone
informs you of the current signal strength by
displaying a number of bars next to the signal
strength icon. The more bars displayed, the stronger
the signal.
If you're inside a building, being near a window may
give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15
minutes of searching, a Power Save feature is
automatically activated. If your phone is active, it
periodically rechecks service availability or you can
check it yourself by pressing any key.
Anytime the Power Save feature is activated, a
message displays on the screen. When a signal is
found, your phone returns to standby mode.
93
Health and safety information
Settings
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and
receiver. When it's turned on, it receives and
transmits radio frequency (RF) signals. When you
use your phone, the system handling your call
controls the power level. This power can range from
0.006 watts to 0.2 watts in digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and
accessories. Faulty service may void the warranty.
There are several simple guidelines to operating
your phone properly and maintaining safe,
satisfactory service.
• Hold the phone with the antenna raised, fully-
extended and over your shoulder.
• Try not to hold, bend or twist the phone's
antenna.
• Don't use the phone if the antenna is damaged.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to
rain or liquid spills. If your phone does get wet,
immediately turn the power off and remove the
battery. If it is inoperable, call Customer Care for
service.
Availability of Various Features/Ring
Tones
Many services and features are network dependent
and may require additional subscription and/or
usage charges. Not all features are available for
purchase or use in all areas. Downloadable Ring
Tones may be available at an additional cost. Other
conditions and restrictions may apply. See your
service provider for additional information.
Battery Standby and Talk Time
Standby and talk times will vary depending on
phone usage patterns and conditions. Battery power
consumption depends on factors such as network
configuration, signal strength, operating
temperature, features selected, frequency of calls,
and voice, data, and other application usage
patterns.
Battery Precautions
• Never use any charger or battery that is
damaged in any way.
• Use the battery only for its intended purpose.
94
Health and safety information
• If you use the phone near the network's base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge and the type of battery and
charger used. The battery can be charged and
discharged hundreds of times, but it will
gradually wear out. When the operation time
(talk time and standby time) is noticeably
shorter than normal, it is time to buy a new
battery.
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-
approved chargers. When a charger is not in use,
disconnect it from the power source. Do not
leave the battery connected to a charger for
more than a week, since overcharging may
shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling
or warming first.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and lifetime of
the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold
battery may temporarily not work, even when
the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below 0 °C
(32 °F).
• Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and - terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
• Dispose of used batteries in accordance with
local regulations. In some areas, the disposal of
batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion
batteries, contact your nearest Samsung
authorized service center. Always recycle. Do not
dispose of batteries in a fire.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Keep the phone and all its parts and accessories
out of the reach of small children.
95
Health and safety information
Settings
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode
electronic circuits.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone's
electronic circuit boards.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
• Do not paint the phone. Paint can clog the
device's moving parts and prevent proper
operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
• When the phone or battery gets wet, the label
indicating water damage inside the phone
changes color. In this case, phone repairs are no
longer guaranteed by the manufacturer's
warranty, even if the warranty for your phone
has not expired.
• If your phone has a flash or light, do not use it
too close to the eyes of people or animals. This
may cause damage to their eyes.
• Use only the supplied or an approved
replacement antenna. Unauthorized antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
•
96
Health and safety information
Settings
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple
power levels so as to use only the power required to
reach the network. In general, the closer you are to a
base station, the lower the power output of the phone.
Before a new model phone is available for sale to the
public, compliance with the European R&TTE Directive
must be shown. This directive includes as one of its
essential requirements the protection of the health and
safety of the user and any other person.
Precautions when using batteries
• Never use a charger or battery that is damaged in
any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power. Talk and standby time are
greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge, the type of battery, and the charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time is noticeably shorter than
normal, it is time to buy a new battery.
• If left unused, a fully charged battery will discharge
itself over time.
• Use only Samsung-approved batteries, and recharge
your battery only with Samsung-approved chargers.
Disconnect the charger from the power source when
it is not in use. Do not leave the battery connected
to a charger for more than a week, since
overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places
because the capacity and lifetime of the battery will
be reduced. Try to keep the battery at room
temperature. A phone with a hot or cold battery may
not work temporarily, even when the battery is fully
charged.
Li-ion batteries are particularly affected by
temperatures below 0°C (32°F).
• Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object like a
coin, clip or pen causes a direct connection between
the + and – terminals of the battery (metal strips on
the battery). For example, do not carry a spare
battery in a pocket or bag where the battery may
contact metal objects. Short-circuiting the terminals
may damage the battery or the object causing the
short-circuiting.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
97
Health and safety information
98
Road safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But
an important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When you are driving a car, driving is your first
responsibility. When using your wireless phone while
driving, follow local regulations in the country or region
you are in.
Operating environment
Remember to follow any special regulations in force in
the area you are in, and always switch off your phone
whenever it is forbidden to use it, or when it may cause
interference or danger.
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation of
the equipment and for the safety of personnel, it is
recommended that the equipment should only be used
in the normal operating position (held to your ear with
the antenna pointing over your shoulder).
Electronic devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These
recommendations are consistent with the independent
research and recommendations of Wireless Technology
Research. If you have any reason to suspect that
interference is taking place, switch off your phone
immediately.
Hearing aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
Other medical devices
If you use any other personal medical devices, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy.
Your physician may be able to assist you in obtaining
this information.
Switch off your phone in health care facilities when
regulations posted in these areas instruct you to do so.
99
Health and safety information
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted facilities
Switch off your phone in any facility where posted
notices require you to do so.
Potentially explosive environments
Switch off your phone when in any area with a
potentially explosive atmosphere, and obey all signs and
instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting operations
are in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include the areas
below decks on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas, such as
propane or butane, areas where the air contains
chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally
be advised to turn off your vehicle engine.
Emergency calls
This phone, like any wireless phone, operates using
radio signals, wireless, and landline networks as well as
user-programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications like medical emergencies.
To make or receive calls, the phone must be switched on
and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless
phone networks or when certain network services and/
or phone features are in use. Check with local service
providers.
To make an emergency call:
1. Switch on the phone.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
3. Press
[]
.
Certain features like Call Barring may need to be
deactivated before you can make an emergency call.
Consult this document and your local cellular service
provider.
Health and safety information
100
Other important safety information
• Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
• Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the
phone, its parts, or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not place
objects, including installed or portable wireless
equipment, in the area over the air bag or in the air
bag deployment area. Improperly installed wireless
equipment could result in serious injury if the air
bag inflates.
• Switch off your phone before boarding an aircraft. It
is dangerous and illegal to use wireless phones in an
aircraft because they can interfere with the
operation of the aircraft.
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
Care and maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years.
• Keep your phone and all its parts and accessories
out of the reach of small children and pets. They
may accidentally damage these things or choke on
small parts.
• Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
• Do not use the phone with a wet hand. Doing so may
cause an electric shock to you or damage to the
phone.
• Do not use or store the phone in dusty, dirty areas,
as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the phone,
which may damage the phone’s electronic circuit
boards.
• Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it with a
101
Health and safety information
soft cloth slightly dampened in a mild soap-and-
water solution.
• Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
• Do not put the phone in or on heating devices, such
as a microwave oven, stove, or radiator. The phone
may explode when overheated.
• When the phone or battery gets wet, the label
indicating water damage inside the phone changes
colour. In this case, phone repairs are no longer
guaranteed by the manufacturer's warranty, even if
the warranty for your phone has not expired.
• If your phone has a flash or light, do not use it too
close to the eyes of people or animals. This may
cause damage to their eyes.
• Use only the supplied or an approved replacement
antenna. Unauthorised antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger, or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
102
Index
A
ABC mode, text input • 25
Active folder • 70
Alarm • 58
Answering
call • 26, 29
second call • 27
Anykey answer • 70
Auto redial • 72
B
Background image • 71
Backlight time, set • 71
Barring, calls • 72
Battery
charging • 7
low indicator • 8
precautions • 81
Bluetooth
receiving, data • 75
sending, data • 75
settings • 74
Broadcast messages • 48
Browser, web • 38
C
Calculator • 63
Calendar • 59
Call costs • 31
Call log
dialled • 30
missed • 30
received • 30
Call time • 31
Caller groups • 33
Caller ID • 71
Calls
answering • 26, 29
barring • 72
diverting • 71
holding • 27
making • 26
redialling • 26
rejecting • 26
transferring • 28
waiting • 72
Camera
photos • 64
videos • 67
CB (Cell Broadcast) messages • 48
Characters, enter • 24
Configuration messages • 46
Connection tone • 69
Contacts
adding • 33
deleting • 32
editing • 32
finding • 32
options • 32
speed-dialling • 34
Convertor • 63
Creating messages
e-mail • 43
file messenger • 44
MMS with attachments • 44
MMS • 41
SMS • 40
CUG (Closed User Groups) • 72
D
Date, set • 69
Deleting
call log • 30
contacts • 32
e-mail • 47, 49
MMS • 45
photos • 54, 66
SMS • 45, 49
video clips • 55, 68
Dialled calls • 30
Display
backlight, set • 71
brightness • 71
icons • 10
language • 70
layout • 10
settings • 71
Diverting, calls • 71
DRM (Digital Rights Management) • 53
DTMF tones, send • 28
E
E-mails
creating/sending • 44
deleting • 47
settings • 51
viewing • 47
Emergency calls • 84
F
FDN (Fixed Dialling Number) mode •
78
File manager • 53
File messenger • 44
Folder tone • 69
103
Index
G
Games • 57
Greeting message • 71
H
Health and safety • 81
Holding, call • 27
I
Icons, description • 10
Images, downloaded • 53
Inbox, messages
e-mail • 47
SMS/MMS • 44
International calls • 26
Internet • 38
J
Java applications • 57
K
key tone volume • 69
Keypad tones
selecting • 69
sending/muting • 28
volume • 69
L
Language, select • 70
Last number, redial • 26
LCD brightness • 71
Locking
call log • 78
contacts • 78
media contents • 78
messages • 78
phone • 78
SIM card • 78
USIM card • 78
Low battery indicator • 8
M
Media player • 77
Memory card
accessing files • 58
installing • 22
Memory status
contacts • 35
downloaded items • 58
messages • 53
phone • 78
scheduled things • 64
Messages
cell broadcast • 48
configuration • 46
e-mail • 47
greeting • 71
MMS with attachments • 44
MMS • 41, 45
push • 45
SMS • 40, 45
Minute minder • 69
Missed alarm events • 59
Missed calls • 30
MMS messages
creating/sending • 41, 44
deleting • 45
settings • 50
viewing • 45
Multiparty-call • 28
Music, downloaded • 56
N
Name card • 34
Names
entering • 24
searching • 32
Network selection • 75
Numbers
searching • 32
storing • 33
O
Organiser • 58
Outbox, messages • 46
P
Password
call barring • 72
phone • 78
Phone
care and maintenance • 85
display • 10
icons • 10
locking • 78
password • 78
resetting • 78
switching on/off • 8
unpacking • 6
Photos
editing • 54
taking • 64
viewing • 54
PIN, change • 78
PIN2, change • 78
Power on/off tone • 69
Privacy lock • 78
Problems, solve • 79
Profiles • 68
Push messages • 45, 53
R
Received calls • 30
Received messages
e-mail • 47
MMS/SMS • 44
Recording
videos • 67
voice memos • 62
Redialling
automatically • 72
manually • 26