Samsung Electronics Co SGHZ650I Single-Band PCS GSM/ EDGE Phone with Bluetooth User Manual

Samsung Electronics Co Ltd Single-Band PCS GSM/ EDGE Phone with Bluetooth Users Manual

Users Manual

Download: Samsung Electronics Co SGHZ650I Single-Band PCS GSM/ EDGE Phone with Bluetooth User Manual
Mirror Download [FCC.gov]Samsung Electronics Co SGHZ650I Single-Band PCS GSM/ EDGE Phone with Bluetooth User Manual
Document ID713076
Application ID1tXJQrFvOhNQuxk7qDtbSA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize97.84kB (1222941 bits)
Date Submitted2006-10-06 00:00:00
Date Available2006-11-20 00:00:00
Creation Date2006-10-06 11:59:59
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2006-10-06 12:21:33
Document TitleD:\PROJECT\승인관련\SGH-Z650i\FCC\...
Document CreatorPScript5.dll Version 5.2
Document Author: CH

* Depending on the software installed or your service provider or country, some of the descriptions
in this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear different from the
illustrations in this guide.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-xxxxxA
English (EU). 09/2006. Rev. 1.0
3
Draft 0
. 15
200
0AGFI3
n:Z6
(Versio
SGH-Z650i
User’s Guide
Drive safely at all times
Do not use a hand-held phone while driving.
Park the vehicle first.
Switch off the phone when refuelling
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or
illegal.
Do not use the phone at a refuelling point
(service station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference.
Using them in an aircraft is both illegal and
dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be
using equipment that could be sensitive to
external radio frequency energy. Follow any
regulations or rules in force.
Interference
All wireless phones may be subject to
interference, which could affect their
performance.
Accessories and batteries
Meet any special regulations in force in any
area and always switch off your phone
whenever it is forbidden to use it, or when it
may cause interference or danger.
Use only Samsung-approved batteries and
accessories, such as headsets and PC data
cables. Use of any unauthorised accessories
could damage you or your phone and may
be dangerous.
Water resistance
Your phone is not water-resistant. Keep it
dry.
Sensible use
Use only in the normal position (held to the
ear). Avoid unnecessary contact with the
antenna when the phone is switched on.
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
At very high volumes, prolonged
listening to a headset can damage your
hearing.
Emergency calls
Qualified service
Key in the emergency number for your
present location, then press
Only qualified service personnel may repair
your phone.
Keep your phone away from small
children
For more detailed safety information, see
"Health and safety information" on page
104.
Keep the phone and all its parts, including
accessories, out of the reach of small
children.
Important safety precautions
Be aware of special regulations
About this Guide
About this Guide
This User’s Guide provides you with
condensed information about how to use
your phone. To quickly learn the basics for
your phone, please refer to “Get started”
and “Step outside the phone.”
In this guide, the following instruction icons
appear:
Indicates that you need to pay
careful attention to the subsequent
information regarding safety or
phone features.
Indicates that you can get more
information on the referenced
page.
Indicates that you need to press
the Navigation keys to scroll to the
specified option and then select it.
→
< >
Indicates a key on the phone. For
example, [ ]
Indicates a soft key, whose function
is displayed on the phone screen.
For example,  or
[Centre] to confirm the
function displayed or
option highlighted.
Back
Press the
right soft key
to return to
the previous
menu level.
1. Press a desired soft key.
4. To exit, choose either of
the following methods.
• Press  to
move up one level.
• Press [ ] to return
to Idle mode.
Use
shortcuts
Press the number key
corresponding to the
option you want.
Customise your phone
Display
language
2. Select a language.
3. Press .
Call ringer
melody
You can change the call
ringer by changing the
properties of the currently
active sound profile.
To change the profile
properties:
1. In Idle mode, press
[Centre] and select
Settings → Phone
settings → Phone
profiles.
3. Press  and
select Edit.
4. Select Voice call
ringtone and select a
ringtone for voice calls.
Get started
1. In Idle mode, press
[Centre] and select
Settings → Phone
settings → Language →
Screen text.
5. Select V-call ringtone
and select a ringtone for
video calls.
6. Press  and
select Save.
To change the sound profile:
1. In Idle mode, press
[Centre] and select
Settings → Phone
settings → Phone
profiles.
2. Select the profile you
want.
3. Press [Centre].
2. Scroll to the sound profile
you are using.
13
Get started
Menu style
You can change the display
style of the main menu
screen.
Menu
shortcuts
1. In Idle menu, press
[Centre] and select
Settings → Display
settings → Main menu
style.
1. In Idle mode, press
[Centre] and select
Settings → Phone
settings → Shortcuts.
2. Select the style you
want.
Idle mode
wallpaper
2. Scroll to an image folder.
3. Select an image and
press .
14
2. Select a key.
3. Select a menu to be
assigned to the key.
You can set wallpaper for the
idle screen.
1. In Idle mode, press
[Centre] and select
Settings → Display
settings → Main
display → Wallpaper.
You can set the Navigation
keys to function as shortcuts
to access your favourite
menus.
4. Press .
Silent
profile
You can activate the Silent
profile to avoid disturbing
other people.
Press and hold [
mode.
] in Idle
Phone lock
You can protect the phone
against unauthorised use
with a phone password. The
phone will require the
password on power-up.
2. Enter the default
password, 00000000,
and press .
3. Enter a new 4- to 8-digit
password and press
.
4. Enter the new password
again and press .
6. Select Enable.
7. Enter the password and
press .
Get started
1. In Idle mode, press
[Centre] and select
Settings → Security →
Change phone
password.
5. Select Phone lock.
Make/Answer calls
Make a call
To make a voice call:
1. Enter an area code and
phone number.
2. Press [
].
3. To end the call, press
[ ].
To make a video call:
1. Enter an area code and
phone number.
2. Press [ ] and if their
phone is compatible, the
other person appears on
the screen.
15
Answer a
call
1. When the phone rings,
press [ ].
2. For a video call, press
 to allow
the other person to see
you.
3. To end the call, press
[ ].
Adjust the
volume
during a call
Press [ / ].
Step outside the phone
Begin with your camera, the media player, the
web, and other special features
Use the camera
Take a
photo
1. Open the phone.
2. In Idle mode, press and
hold [ ] or [Centre] to
turn on the camera.
3. Aim the lens at the
subject and make any
desired adjustments.
4. Press [Centre] to take a
photo. The photo is saved
automatically.
5. Press [Centre] or
 to take another
photo.
16
View a
photo
1. In Idle mode, press
[Centre] and select My
files → Images.
Play a video
Record a
video
1. In Idle mode, press and
hold [ ] to turn on the
camera.
2. Press [1] to switch to
Record mode.
3. Press [Centre] to start
recording.
4. Press < > to stop
recording. The video is
saved automatically.
5. Press  to record
another video.
2. Select the video clip you
want from the My video
clips folder.
Step outside the phone
2. Select the photo you
want from the Photos
folder.
1. In Idle mode, press
[Centre] and select My
files → Videos.
Play music
Copy music
files to the
phone
Use these methods:
•
•
•
•
Download from the
wireless webp. 55
Download from a
computer using the
optional Samsung PC
StudioSamsung PC
Studio User’s Guide
Receive via Bluetooth
p. 84
Copy files to a memory
card and insert the card
into the phonep. 25
17
Step outside the phone
Create a
play list
1. In Idle mode, press
[Centre] and select
Multimedia → Media
player → Music.
2. Press  and
select Add to playlist →
Selected or Multiple.
3. For Multiple, select
Sounds or Memory
card, and press [Centre]
to select the files you
want and press .
Then press  to
return to the file list.
4. Press [Left] or [Right] to
access the play list.
Play music
files
1. From the Playlist screen,
press [Centre].
2. During playback, use the
following keys:
• Centre: pauses or
resumes playback.
• Left: returns to the
previous file. Moves
backward in a file
when held down.
• Right: skips to the
next file. Skips
forward in a file when
held down.
• Up: opens the play
list.
• Down: changes the
repeat mode.
•
/ : adjusts the
volume.
3. Press  to stop
playback.
18
Browse the web
Launch the
web
browser
Navigate
the web
In Idle mode, press
 and select
i-Menu.
•
To scroll through browser
items, press [Up] or
[Down].
•
To select an item, press
[Centre].
•
To return to the previous
page, press [Left].
•
To access options, press
.
Add a
contact
To the phone’s memory:
1. In Idle mode, enter a
phone number and press
.
Step outside the phone
Using the i-mode web browser, you can
easily access the wireless web to get a
variety of up-to-date services and
information and to download web content.
Use Phonebook
2. Select Add to
Phonebook → Phone →
New → a number type.
3. Specify contact
information: First name,
Last name, Mobile,
Home, Office, Fax
number, Etc., Email,
Group, URL, Note,
Birthday, Postal address
1/Postal address 2
(Additional information,
Street & number, Postal
code, City, County, and
Country).
4. Press  and
select Save to save the
contact.
19
Step outside the phone
Add a
contact
(continued)
Find a
contact
20
3. Select a contact.
4. Scroll to a number and
press [ ] to dial, or
press [Centre] to edit
contact information.
To the USIM/SIM card:
1. In Idle mode, enter a
phone number and press
.
2. Select Add to
Phonebook → SIM →
New.
3. Specify contact
information: Name,
Mobile, Group (for USIM),
and Location number.
4. Press , or press
 and select
Save to save the contact.
1. In Idle mode, press
[Centre] and select
Phonebook → Search
for contacts.
2. Enter the first few letters
of the name you want.
Create and
send a
name card
1. In Idle mode, press
[Centre] and select
Phonebook → My
namecard.
2. Specify your contact
information.
3. Press  and
select Save to save the
name card.
4. To send the name card,
access My namecard
again.
5. Press  and
select Send namecard
via → a sending method.
Send messages
Send a text
message
(SMS)
2. Enter the message text
and press [Centre].
3. Enter destination
numbers.
4. Press [Centre] to send
the message.
Send an
i-MMS
message
(MMS)
1. In Idle mode, press
 and select
Compose i-mms.
2. Select Destination.
Step outside the phone
1. In Idle mode, press
[Centre] and select
Messages → Create
message.
3. Enter destination
numbers or e-mail
addresses and press
[Centre].
4. Select Title.
5. Enter the message title
and press [Centre].
6. 6.Select SMIL → Media
and add text, images,
sounds, and videos.
7. Press [Centre].
8. On the slide preview
screen, press 
and select Send to send
the message.
21
Step outside the phone
Send an
i-mail
1. In Idle mode, press
 and select
Compose i-mail.
2. Select Destination.
3. Enter destination
numbers or e-mail
addresses and press
[Centre].
4. Select Title.
5. Enter the mail title and
press [Centre].
Send an
i-mail
(Continued)
6. Select the attachment
field and use the
following options for
adding files.
• Attach File: add
images, sounds,
videos, music files,
name cards, or
schedule items.
• Attach Melody: add
MFi (Melody Format
for i-mode) melody
files.
• Attach Bookmark:
add bookmarks.
7. Select Text.
8. Enter the mail text and
press [Centre].
9. Select Send to send the
mail.
22
View messages
View a
text
message
When a notification appears:
1. Press .
From the Inbox:
1. In Idle mode, press
[Centre] and select
Messages → My
message → Inbox.
Your phone is equipped with Bluetooth
technology, enabling you to connect the
phone wirelessly to other Bluetooth devices
and exchange data with them, talk handsfree, or control the phone remotely.
Turn on
Bluetooth
From the Inbox:
1. In Idle mode, press
 and select
Inbox → an Inbox folder.
2. Select a message.
1. In Idle mode, press
[Centre] and select
Bluetooth → Activation
→ On.
2. Select My phone’s
visibility → On to allow
other devices to find your
phone.
2. Select a message.
View an
i-MMS or
i-mail
Step outside the phone
2. Select the message from
the Inbox.
Use Bluetooth
Search for
and pair
with a
Bluetooth
device
1. In Idle mode, press
[Centre] and select
Bluetooth → My
devices → Search for
new devices.
2. Select a device.
23
Step outside the phone
Search for
and pair
with a
Bluetooth
device
(continued)
Send data
3. Enter a Bluetooth PIN or
the other device’s
Bluetooth PIN, if it has
one, and press .
When the owner of the
other device enters the
same code, pairing is
complete.
1. Access an application,
Phonebook, My files,
Calendar, Task, or
Memo.
2. Scroll to an item.
3. Press  and
select Send namecard
via/Send via →
Bluetooth.
4. Select a device.
5. If necessary, enter the
Bluetooth PIN and press
.
24
Receive
data
1. When a device attempts
to access your phone,
press  to permit
the connection.
2. If necessary, press
 to confirm that
you are willing to receive.
Use a memory card
Important
memory
card
information
• Frequent erasing and
writing will shorten a
card’s lifespan.
• Do not remove a card
from the phone or turn
off the phone while data
is being accessed or
transferred. This could
result in loss of data and/
or damage to the card or
phone.
• Do not subject cards to
strong shocks.
Insert a
memory
card
Step outside the phone
• Do not touch card
terminals with your
fingers or metal objects.
If dirty, wipe the card
with a soft cloth.
• Keep cards away from
small children or pets.
• Do not expose cards in a
place subject to electrostatic discharge and/or
electrical noise.
You can use a memory card to increase your
phone’s memory capacity.
1. Insert a memory card
into the card slot, with
the label side face down.
2. Press the card until it
locks into place.
25
Step outside the phone
Remove the
memory
card
1. Press the memory card
so that it is disengaged
from the phone.
2. Remove the card from
the slot.
Use a card
adapter
Using a card adapter and a
USB card reader/writer, you
can read the card on a PC.
1. Insert a memory card
into a card adapter, and
then the adapter into a
card reader/writer.
2. Plug the USB connecter
of the card reader/writer
into the USB port on your
PC.
3. Access the appropriate
memory disk and copy to
and from the card.
26
Enter text
ABC, T9, Number, and Symbol modes
You can enter text for some features, such
as Messages, Phonebook, or Calendar, using
ABC mode, T9 mode, Number mode, and
Symbol mode.
Using ABC mode
Press the appropriate key until the character
you want appears on the display.
Key
Characters in order displayed
Upper case
Lower case
Changing the text input mode
•
•
•
Press and hold [ ] to switch between T9
mode (
) and ABC mode (
).
Depending on your country, you may
also be able to access an input mode for
your specific language.
Press [ ] to change case or switch to
Number mode (
).
Press and hold [ ] to switch to Symbol
mode (
).
(Creating an SMS message with GSM alphabet
encoding)
Other ABC mode operations
•
•
•
To enter the same letter twice or to enter
a different letter on the same key, wait
for the cursor to move to the right
automatically or press [Right]. Then,
enter the next letter.
Press [ ] to insert a space.
Press the Navigation keys to move the
cursor.
27
Enter text
•
Press [ ] to delete characters one by
one. Press and hold [ ] to clear the
display.
Other T9 mode operations
Using T9 mode
•
T9 is a predictive text input mode that
allows you to key in any character using
single keystrokes.
•
•
Entering a word in T9 mode
•
1. Press [2] to [9] to start entering a word.
Press each key once for each letter.
For example, press [4], [3], [5], [5],
and [6] to enter Hello in T9 mode.
T9 predicts the word that you are typing,
and it may change with each key that
you press.
2. Enter the whole word before editing or
deleting characters.
3. When the word displays correctly, go to
step 4. Otherwise, press [0] to display
alternative word choices for the keys
that you have pressed.
For example, Of and Me use [6] and [3].
28
4. Press [ ] to insert a space and enter the
next word.
Press [1] to enter periods or apostrophes
automatically.
Press [ ] to insert a space.
Press the Navigation keys to move the
cursor.
Press [ ] to delete characters one by
one. Press and hold [ ] to clear the
display.
Adding a new word to the T9
dictionary
This feature may not be available for some
languages.
1. Enter the word that you want to add.
2. Press [0] to display alternative words for
your key presses. When there are no
more alternative words, Spell appears
on the bottom line.
3. Press .
• Enter the word you want using ABC
mode and press .
Using Number mode
Call functions
Number mode enables you to enter
numbers.
Advanced calling features
Press the keys corresponding to the digits
you want.
Making a call
Using Symbol mode
Symbol mode enables you to insert symbols.
To
Press
scroll to a symbol set
the Navigation
keys.
select a symbol
the corresponding
number key.
clear the entered
symbols
insert the symbols
.
].
1. In Idle mode, enter an area code and
phone number.
• Press [ ] to clear the last digit or
press and hold [ ] to clear the
whole display. You can move the
cursor to edit an incorrect digit.
• Press and hold [ ] to enter a pause
between numbers.
2. Press [ ].
3. When you want to end the call, press
[ ].
Making an international call
1. In Idle mode, press and hold [0]. The +
character appears.
2. Enter the country code, area code, and
phone number, then press [ ].
29
Call functions
Redialling recent numbers
Answering a call
1. In Idle mode, press [ ] to display the
list of recent numbers.
2. Scroll to the number you want and press
[ ].
When you receive a call, the phone rings and
displays the incoming call image.
Making a call from Phonebook
Once you have stored a number in
Phonebook, you can dial the number by
selecting it from Phonebook.p. 38
You can also use the speed dial feature to
assign your most frequently dialled numbers
to specific number keys.p. 42
You can quickly dial a number from the
USIM/SIM card using its location number
assigned when stored.
1. In Idle mode, enter a location number
and press [ ].
2. Scroll through other numbers, if
necessary.
3. Press  or [ ] to make a
voice call.
30
Press  or [
] to answer the call.
Tips for answering a call
•
•
•
•
When Any key answer is active, you
can press any key, except for 
and [ ].p. 93
When Slide up in Slide settings is set
to Accept call, you can simply open the
phone.p. 93
Press  or [ ] to reject a call.
Press and hold [ / ] to reject a call or
mute the ringer, depending on the
Volume key in incoming call setting.
p. 93
Viewing missed calls
If you have missed calls, the screen displays
how many calls you have missed.
1. Press .
2. If necessary, scroll through the missed
calls.
3. Press [ ] to dial the number you want.
Placing a call on hold/Retrieving
Use the headset to make or answer calls
without holding the phone.
Press  to place a call on hold, or
press  to retrieve the call.
Connect the headset to the jack on the left
side of the phone. The button on the
headset works as follows:
Making a second call
To
Press
redial the last call
the button twice and
hold.
answer a call
the button.
end a call
the button.
Options during a call
You can access a number of functions during
a call.
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume
during a call.
Press [ ] to increase the volume level and
[ ] to decrease the volume level.
Call functions
Using the headset
You can make another call if your network
supports this function.
1. Press  to put the call on hold.
2. Make the second call in the normal way.
3. Press  to switch between the
calls.
4. Press  and select End →
Held call to end the call on hold.
5. To end the current call, press [ ].
Answering a second call
You can answer an incoming call while
already on the phone, if your network
supports this function and you have
activated the call waiting feature.p. 96
1. Press [ ] to answer the call. The first
call is automatically put on hold.
2. Press  to switch between the
calls.
31
Call functions
3. Press  and select End →
Held call to end the call on hold.
4. To end the current call, press [ ].
•
Using the speakerphone feature
Use the phone as a speakerphone to talk
and listen with the phone a short distance
away.
Press [Centre] and then  activate the
speakerphone feature. Press [Centre] to
switch back to the earpiece.
•
•
Using In-call options
Press  to access the following
options during a call:
• Speaker On/Normal: turn on the
speakerphone feature or switch back to
Normal mode.
• Switch to headset/Switch to phone:
switch the call to a Bluetooth headset or
hands-free car kit or back to the phone.
To use this feature, you first need to
connect your headset to the phone.
p. 82
32
•
•
Whisper on/Whisper off: turn on or off
Whisper mode. Whisper mode
automatically increases the microphone's
sensitivity to allow the other person to
hear your voice even though you may be
whispering.
Join: set up a multi-party call by adding
a caller on hold to a currently active call.
You can include up to 5 people on a
multi-party call.
Split: have a private conversation with
one multi-party call participant. The
other participants can converse with
each other. After the private
conversation, select Join to return both
private participants to the multi-party
call.
Transfer: transfer the currently active
call to a caller on hold. The two callers
can talk to each other, but you are
disconnected from the call.
Mute/Unmute: switch off the phone's
microphone so that the other person on
the phone cannot hear you, or switch it
back on.
•
Mute key tone/Unmute key tone:
switch the key tones off or on.
•
•
•
•
•
•
•
New call: make a new call.
Phonebook: access the contact list.
Add to phonebook: add the other
person’s phone number to Phonebook.
Create message: send an SMS to the
selected number.
Send DTMF: send DTMF (Dual tone
multi-frequency) tones as a group. The
DTMF tones are the tones used in phones
for tone dialling, sounding when you
press the number keys. This option is
helpful for entering a password or an
account number when you call an
automated system, like a banking
service.
Memo: create a memo.
•
•
•
Call functions
To communicate with answering
machines or computerised telephone
systems, Unmute key tone must be
selected.
SIM service: access special services,
such as news, weather forecasts,
entertainment, and location services,
provided by your SIM card. This option is
available when you use a SIM card
supporting SIM Application Toolkit
menus, and may be differently displayed
depending on your service provider.
End call: end a call.
End: disconnect the call currently on
hold, active call, or all calls.
Save as memo: save the entered
number as a memo.
Using the video call feature
In a 3G (UMTS) service area, your phone
can make or receive a video call, allowing
you to see the other person on the screen
during a conversation. The other person’s
phone must support the video call feature.
33
Call functions
Making a video call
•
1. In Idle mode, enter the area code and
phone number.
2. Press [ ].
•
Answering a video call
When you receive a video call, answer as
you would when receiving a voice call. Press
 to allow the caller to see you.
Using video call options
During a video call, press  to
access the following options:
• Speaker on/Speaker off: turn on the
speakerphone feature or switch back to
Normal mode.
• Switch to headset/Normal: switch the
call to a Bluetooth headset or hands-free
car kit or back to the phone. To use this
feature, you first need to connect your
headset to the phone.
p. 82
• Mute: turn off the camera, microphone,
or key tone.
34
•
Switch camera: switch between the
camera lens on the front and back.
Display options: change the camera
image settings.
Brightness: display the brightness
control bar and adjust the brightness by
pressing [Left] or [Right].
Effects: change the colour tone of the
image.
Video quality: change the image
quality.
Zoom: display the zoom control bar and
zoom in or out by pressing [Up] or
[Down].
Show caller ID/Hide caller ID: display
or hide caller information.
More options: access the following
options:
Phonebook: access the contact list.
Caller’s contact details: access the
contact information, if the caller is saved
in Contacts.
•
Create message: send an SMS
message to the person with whom you
are talking.
Message inbox: access the received
message list.
Use media from My files/Revert to
previous status: show another image
instead of your camera image on the
other person’s phone, or restore the
display to the camera image.
Calendar: access the calendar.
Memo: create a memo.
End call: end the video call.
Menu functions
All menu options listed
Call log
(Menu 1)
Use this menu to view the calls you have
dialled, received, or missed, and the length
of the calls. You can also check the cost of
your calls, if your USIM/SIM card supports
this function.
To access this menu, press [Centre] in Idle
mode and select Call log.
Accessing a call log
You can access the most recent calls dialled,
received, or missed.
1. Press [Left] or [Right] to move to
another call type.
2. Press [Up] or [Down] to scroll through
the call list.
3. Press [Centre] to view the details of a
call, or press [ ] to dial a number.
35
Menu functions
Using call log options
While viewing call details, press 
to access the following options:
• Voice call: make a voice call to the
number.
• Video call: make a video call to the
number, if the 3G service is available.
• Add to Phonebook: save the number to
Phonebook.
• Create message: send an SMS, i-mms,
or i-mail to the selected number.
• Delete: delete the selected call log or all
logs.
• View contact details: access contact
information, if the caller is saved in
Phonebook.
Viewing the data counter
From the call log list, press  and
select Call manager → Data counter to
view the total amount of sent or received
data.
36
The following counters are available:
• Total sent: check the total amount of
data you have sent.
• Total received: check the total amount
of data you have received.
To reset a counter or all of the counters,
press  and select Reset or
Reset all.
If the phone is locked, it will require the
password. The password is preset to
00000000. You can change this password.
p. 100
Viewing call cost
From the call log list, press  and
select Call manager → Call costs to view
the cost of calls. This option is available only
if supported by your USIM/SIM card. Note
that this is not intended to be used for billing
purposes.
The following counters are available:
• Total cost: check the total cost of all
your calls. If the total cost exceeds the
maximum cost set in Edit cost limit,
you must reset the counter before you
can make another call.
•
•
Last call cost: check the cost of your
last call.
Cost limit: check the maximum cost
set.
From the call log list, press  and
select Call manager → Call times to view
the time log for calls made and received.
The actual time invoiced by your service
provider will vary.
•
•
To reset a counter or all of the counters,
press  and select Reset or
Reset all.
Call log (Menu 1)
Viewing call times
•
Dialled voice calls: check the total
length of voice calls dialled.
Dialled video calls: check the total
length of video calls dialled.
Received voice calls: check the total
length of voice calls received.
Received video calls: check the total
length of video calls received.
Menu functions
Press  to access the following
options:
• Reset call cost: reset the cost counters.
• Edit cost limit: set the maximum cost
authorised for your calls.
• Setup currency: set the currency that
is applied when the cost of your call is
calculated.
•
If the phone is locked, it will require the
password. The password is preset to
00000000. You can change this password.
p. 100
The following counters are available:
• Total dialled: check the total length of
all the calls you have dialled.
• Total received: check the total length
of all the calls you have received.
37
Menu functions
Phonebook
(Menu 2)
You can store phone numbers on your USIM/
SIM card and in your phone’s memory. The
USIM/SIM card and phone’s memory are
physically separate, but they are used as a
single entity called Phonebook.
To access this menu, press [Centre] in Idle
mode and select Phonebook.
Search for contacts (Menu 2.1)
Use this menu to search for contacts in
Phonebook.
Finding a contact
1. Enter the first few letters of the name
that you want to find.
2. Select a contact from the list.
3. Scroll to a number and press [ ] to dial,
or press [Centre] to edit contact
information.
Finding a contact in Idle mode
You can find contacts in Idle mode, by the
spelling of a contact name. The phone
searches for the contact names starting with
the letters labelled on any of the keys you
pressed.
1. In Idle mode, press the number keys
containing the letters you want.
2. Press  and select Smart
search.
3. The phone searches Phonebook for the
matching contacts and shows results.
Using Phonebook options
While viewing contact details, press
 to access the following options:
If you find a contact using Smart search,
some options are not available.
•
•
•
38
Edit: edit contact information.
Voice call: make a voice call to the
selected number.
Send message: send an SMS, i-mms,
to the selected number, or send an imms message or an i-mail to the
selected e-mail address.
•
•
•
•
•
•
Print via Bluetooth: print contact
information by connecting the phone to a
printer via Bluetooth. Some printers may
not be compatible with the phone.
Create contact (Menu 2.2)
Use this menu to add a new contact to
Phonebook.
Storing a contact in the phone’s
memory
1. Select Phone.
2. Change the settings or enter information
about the contact.
• First name/Last name: assign a
name.
• Mobile/Home/Office/Fax number/
Etc.: add a number in any type.
To mark an added number for making
video calls, press  and
select Mark video call.
• Email: assign an e-mail address.
• Group: assign the contact to a caller
group.
Phonebook (Menu 2)
•
•
Menu functions
•
Duplicate: make a copy of the contact.
Delete: delete the contact.
Mark default number: set the selected
number as the default for the contact.
Send namecard via: send the contact
details via i-mms, i-mail, or Bluetooth.
Special options: set the following
options:
Image: assign a caller ID image to alert
you to a call from the person.
Ringtone: assign a ringtone to alert you
to a call from the person.
Msg. alert tone: select a ringtone to
alert you to an incoming message from
the person.
Add to group: assign the contact to a
caller group.
Add to speed dial: set the selected
number as a speed dial entry.
Copy to SIM/Copy to phone: copy the
contact from the phone’s memory to the
USIM/SIM card, or vice versa.
39
Menu functions
•
•
•
URL: enter a homepage address.
Note: add a memo about the person.
Birthday: enter the person’s
birthday.
• Postal address 1/Postal address
2: enter the person’s postal address.
3. Press  and select Special
options to add additional information:
• Image: assign a caller ID image to
alert you to a call from the person.
• Ringtone: assign a ringtone to alert
you to a call from the person.
• Msg. alert tone: select a ringtone to
alert you to an incoming message
from the person.
4. Press  and select Save to
save the contact.
Group: (for USIM) assign a caller
group.
• Location number: enter a location
number.
3. If you are using a USIM card, press
 to add additional
information:
• Add item: add a number type to the
contact.
• Delete item: remove the selected
category from the contact.
4. Press , or press  and
select Save to save the contact.
Storing a contact on the USIM/SIM
card
Creating a caller group
1. Select SIM.
2. Enter information about the contact.
• Name: assign a name.
• Mobile: add a phone number.
40
•
Groups (Menu 2.3)
Use this menu to organise your contacts in
caller groups.
1. Press  and select Create
group.
2. Enter a name for the group and press
.
Adding members to a caller group
My namecard (Menu 2.4)
1. Select a group.
2. Press [Centre] to select the contacts to
be added.
3. Press .
Use this menu to create a name card and
send it to other people.
Using name card options
After saving your name card, press
 to access the following options:
• Edit: edit the name card.
• Send namecard via: send the name
card via i-mms, i-mail, or Bluetooth.
• Delete: delete the name card.
• Exchange namecard: exchange name
cards with another person via Bluetooth.
• Print via Bluetooth: print your contact
information by connecting the phone to a
printer via Bluetooth. Some printers may
not be compatible with the phone.
Phonebook (Menu 2)
While viewing the group list, press
 to access the following options:
• Add member: add members to the
selected group, if the group does not
have any.
• View members: display the members
of the selected group.
• Create group: add a new group.
• Delete: delete the selected group or all
groups. Group members, however, will
not be deleted from Phonebook.
• Rename group: change the group
name.
• Send message: send an SMS, i-mail, or
i-mms message to the members of the
selected group.
The procedure for creating your name card
is the same as the one for saving a phone
number in the phone’s memory.p. 39
Menu functions
Managing caller groups
Saving your name card
41
Menu functions
Copy all (Menu 2.5)
Use this menu to copy all of the contacts
stored on the USIM/SIM card to the phone’s
memory, or vice versa.
Service number (Menu 2.6)
Use this menu to view the list of Service
Dialling Numbers (SDN) assigned by your
service provider, including emergency
numbers and numbers for directory
enquiries. This menu is available if your
USIM/SIM card supports SDN.
Scroll to the number you want and press
[ ].
Phonebook settings (Menu 2.7)
Use this menu to change the default settings
for Phonebook.
42
2. Select a contact from the contact list.
3. Select a number.
Managing speed dial entries
From the Speed dial screen, press
 to access the following options:
• Assign: assign a number to an
unassigned key.
• View: check the name and number
assigned to a key.
• Voice call: make a voice call to the
number assigned to a key.
• Video call: make a video call to the
number assigned to a key, if the 3G
service is available.
• Change: assign a different number to a
key.
• Remove: clear the speed dial setting for
a key.
Speed dial (Menu 2.7.1)
Dialling speed dial numbers
Use this menu to assign a speed dial number
(2 to 9) for 8 of your most frequently dialled
numbers.
In Idle mode, press and hold the appropriate
key.
Assigning speed dial numbers
1. Select a key location from 2 to 9. Key 1
is reserved for your voicemail server.
Use this menu to change the sort order of
the contact list.
Sort contacts by (Menu 2.7.2)
Save new contacts to (Menu 2.7.3)
Multimedia
Use this menu to select a default memory
location for saving contacts. If you select
Always ask, the phone will ask you to
select a memory location each time you save
a number.
This menu provides you with access to and
options for the media player and voice
recorder.
Use this menu to set the memory location
from which Phonebook shows entries.
Own number (Menu 2.7.5)
Memory status (Menu 2.8)
Use this menu to check the number of
contacts you have stored in the phone’s
memory and on the USIM/SIM card.
Media player (Menu 3.1)
You can enjoy music and video files from the
phone’s memory. First, you need to save
files to your phone’s memory.
Multimedia (Menu 3)
Use this menu to check your phone
numbers, or to assign a name to each of the
numbers. Changes made here do not affect
the actual subscriber numbers on your
USIM/SIM card.
To access this menu, press [Centre] in Idle
mode and select Multimedia.
Menu functions
View contacts in (Menu 2.7.4)
(Menu 3)
To enjoy high quality music, you can use an
optional Bluetooth stereo headset.
Downloading or receiving music or
video files
You can play the following types of files on
your phone.
• Music: *.mp3, *.aac, *.m4a, *.mmf,
*.wav, *.mid, *.imy
• Video: *.mp4, *.3gp
Use the following methods to save music or
video files to your phone’s memory:
• Download from the wireless webp. 55
43
Menu functions
•
•
•
Download from a computer using the
optional Samsung PC StudioSamsung
PC Studio User’s Guide
Receive via an active Bluetooth
connectionp. 84
Copy files to a memory card and insert
the card info the phonep. 25
Downloaded or received files are stored in
the Music folder in Sounds, or Downloads
folder in Videos.p. 66
Music (Menu 3.1.1)
Use this menu to arrange and play your
music. You need to add files to the play list.
Creating a play list
1. From the My music list, press
 and select Add to playlist
→ Selected or Multiple.
2. For Multiple, select Sounds or Memory
card, press [Centre] to select the files
you want and press .
3. Press  to return to the file list.
4. Press [Left] or [Right] to access the play
list.
44
Playing music files
1. From the Playlist screen, press
 and select Play via.
2. Select Phone to use the phone speaker.
Select Bluetooth stereo headset to
use a Bluetooth stereo headset and then
search for and connect the phone to the
headset.
During playback, use the following keys:
Key
Function
Centre
Pauses or resumes playback.
Left
Returns to the previous file.
Moves backward in a file when
held down.
Right
Skips to the next file. Skips
forward in a file when held
down.
Up
Opens the play list.
Down
Changes the repeat mode.
: Off,
: Repeat 1,
Repeat all)
Key
Function
•
Adjusts the volume.
Changes the playback
animation.
•
•
•
Multimedia (Menu 3)
While playing a file, press  to
access the following options:
• Pause/Play: pause or begin playback.
• Bluetooth stereo headset/Transfer
to phone: switch sound output to a
Bluetooth stereo headset or phone
speaker.
• Stop: stop playback.
• Open playlist: access the play list.
• Show controller/Hide controller:
display or hide the controller image. This
option may not be shown depending on
the playback animation setting.
• Send via: send the current file via
Bluetooth.
• Set as: set the file as your ringtone for
voice calls or video calls, or as a ringtone
for a Phonebook entry.
Menu functions
Using music player options
•
Activate key: get a new licence key
when the key for the selected DRM file
expires.
Reactivate key: get another licence key
even when the key for the selected DRM
file has not expired.
Details: access the file properties.
Settings: change the default settings for
playing music files.
Repeat mode: select a repeat mode.
Shuffle: set the music player to play
tracks in random order.
Visualisation: change the playback
animation.
Backlight: set whether or not the
display backlight stays on during
playback.
Hide controller: set the music player to
hide the controller image.
Volume: select a volume level.
Key management: manage the licence
keys you have acquired.
45
Menu functions
Editing the play list
You can edit the play list by adding or
removing files or changing the play order.
1. From the My music list, press [Left] or
[Right] to access the play list.
2. Press  to access the options
for editing the play list.
• Add: add new music files or folders.
• Move track in playlist: move the
selected file to the position you want
within the play list.
• Remove: remove the selected file or
all files from the play list.
3. When you have finished, press
 and select Play via → a
sound output mode to begin playback.
Videos (Menu 3.1.2)
Use this menu to access and play video files.
Playing video files
Select a video file from the list. The video
player opens and the video plays.
46
During playback, use the following keys:
Key
Function
Centre
Pauses or resumes playback.
Left
Returns to the previous file.
Moves backward in a file when
held down.
Right
Skips to the next file. Moves
forward in a file when held
down.
Up
Opens the file list.
Down
Changes the repeat mode.
: Off,
: Repeat 1,
Repeat all)
Adjusts the volume.
Using video player options
While playing a file, press  to
access the following options:
• Pause/Play: pause or begin playback.
• Stop: stop playback.
•
•
•
•
Use this menu to record voice memos. A
voice memo can be up to 30 minutes long.
Recording a voice memo
1. Press [Centre] to start recording.
2. Speak into the microphone.
Press [Centre] to pause or resume
recording.
3. Press  or [Down] to end
recording. The voice memo is saved
automatically.
4. Press [Centre] to review the memo, or
press [Up] to record additional memos.
Multimedia (Menu 3)
•
•
Voice recorder (Menu 3.2)
Menu functions
•
Show controller/Hide controller:
display or hide the controller image.
Send via: send the current file via
Bluetooth.
Activate key: get a new licence key
when the key for the selected DRM file
expires.
Reactivate key: get another licence key
even when the key for the selected DRM
file has not expired.
Details: access the file properties.
Settings: change the default settings for
playing video files.
Repeat mode: select a repeat mode.
Shuffle: set the video player to play
tracks in random order.
Hide controller: set the music player to
hide the controller image.
Volume: select a volume level.
Key management: manage the licence
keys you have acquired.
Playing a voice memo
1. From the voice recorder screen, press
 and select My voice clips.
2. Select a voice memo from the My voice
clips folder. The memo plays.
47
Menu functions
During playback, use the following keys:
Key
Function
Centre
Pauses or resumes playback.
Left
Returns to the previous file.
Moves backward in a file when
held down.
Right
Skips to the next file. Moves
forward in a file when held
down.
Down
Adjusts the volume.
Stops playback.
Using voice recorder options
After playback, press the  to
access the following options:
• Play: play the selected voice memo in
Review mode.
• Record: record a new voice memo.
• My voice clips: access the voice memo
list.
• Send via: send the file via i-mail,
i-mms, or Bluetooth.
48
•
Settings: customise the default settings
for the voice recorder.
Default name: set the default prefix for
file names.
Recording time: set the maximum
recording time.
Visualiser skin: change the skin type of
the voice recorder.
Messages
(Menu 4)
Use the Messages menu to send and
receive text messages. You can also access
broadcast messages.
To access this menu, press [Centre] in Idle
mode and select Messages.
Create message (Menu 4.1)
Use this menu to create and send text
messages.
Short Message Service (SMS) allows you to
send or receive text messages that may
include simple pictures, animated images,
and melodies.
Creating and sending an SMS
message
•
1. Enter your message and press [Centre].
•
Using options while composing an
SMS message
While composing a message, press
 to access the following options:
• Send: send the message.
• View as vivid message: view the
message in 3D view mode. The phone
converts message text to 3D vivid
graphics. This option is available only
when the message consists of a single
page.
•
My messages (Menu 4.2)
Messages (Menu 4)
2. Enter a destination number.
To send the message to more than one
recipient, fill in additional destination
fields.
3. Press [Centre] to send the message.
•
Menu functions
• The maximum number of characters
allowed in a message varies by service
provider. If your message exceeds the
maximum number of characters, the
phone will split the message.
• You can use various options by
pressing .next section
Input method: change the text input
mode.
Input language: change the language
to be used in T9 input mode.
Insert: insert a text template,
Phonebook entry, or bookmarked URL
address into text.
Save to drafts: save the message in the
Drafts folder.
Use this menu to access messages you have
received, sent, or which have failed in
sending.
Inbox (Menu 4.2.1)
This folder stores all of the messages you
have received.
Viewing a message
The following icons may appear on the
message list to show the message type:
•
SMS
•
Voicemail
•
Broadcast message from your
service provider
49
Menu functions
•
Delivery report for your sent
messages
Using message options
While viewing a message, press 
to access the following options:
SMS messages
• Voice call: make a voice call to the
selected number.
• Video call: make a video call to the
selected number, if the 3G service is
available.
• Create message: send an SMS, i-mail,
or i-MMS message to the selected
number, or e-mail address.
• Go to URL: access the selected web link.
• Add to: add the selected web link to
your bookmark list or Phonebook.
• Reply: reply to the sender via SMS,
i-mail, or i-MMS message.
• Forward: forward the message to other
people.
50
•
•
•
•
•
•
Zoom view: zoom in or out on the text
by pressing[ / ]. To switch back to
normal view, press .
View as vivid message/View as: view
the message in 3D view mode or switch
back to normal view mode. This option is
available only when the message
consists of a single page.
Delete: delete the message.
Move to phone/Move to SIM: move
the message between the USIM/SIM
card and the phone’s memory.
Add to Phonebook: save the sender's
phone number to Phonebook. If a phone
number, e-mail address, or URL address
within the message is selected, you can
also save it to Phonebook.
Print via Bluetooth: print the message
by connecting the phone to a printer via
Bluetooth. Some printers may not be
compatible with the phone.
Configuration messages
• Install: apply the configuration specified
in the message to your phone.
• Delete: delete the message.
Drafts (Menu 4.2.2)
From the message list, press  to
access the following options:
• Edit: change the selected message.
• Send: send the message.
• Delete: delete the selected message or
all messages.
• Sort by: change the sort order of the
message list.
Outbox (Menu 4.2.3)
This folder stores messages the phone is
attempting to send or has failed to send.
The following icons are available to show the
message status:
•
Being sent
•
Failed to be sent
Messages (Menu 4)
This folder stores messages you have saved
to send at a later time.
Lock/Unlock: lock the message to
prevent it from being deleted, or unlock
the message.
Menu functions
Broadcast messages
• Save: save the message to the phone’s
memory.
• Delete: delete the message.
•
From the message list, press  to
access the following options:
• View: open the selected MMS message.
• Send again: resend the message.
• Edit: change the selected message.
• Delete: delete the selected message or
all messages.
• Sort by: change the sort order of the
message list.
51
Menu functions
•
Lock/Unlock: lock the message to
prevent it from being deleted, or unlock
the message.
Sentbox (Menu 4.2.4)
This folder stores messages that you have
sent.
While viewing a message, press 
to access the following options:
• Voice call: dial the selected number.
• Video call: make a video call to the
selected number, if the 3G service is
available.
• Create message: send an SMS, i-mail,
or i-MMS message to the selected
number, or e-mail address.
• Add to Phonebook: save the sender's
phone number to Phonebook. If a phone
number, e-mail address, or URL address
within the message is selected, you can
also save it to Address book.
• Go to URL: access the selected web link.
52
•
•
•
•
•
Add to: add the selected web link to
your bookmark list or the selected phone
number or e-mail address to Address
book.
Forward: forward the message to other
people.
Zoom view: zoom in or out on the text
by pressing[ / ]. To switch back to
normal view, press .
Move to phone/Move to SIM: move
the message between the USIM/SIM
card and the phone’s memory.
Delete: delete the message.
Voice mail (Menu 4.3)
Use this menu to access the voicemail
server.
Templates (Menu 4.4)
Use this menu to create SMS templates with
the sentences you use frequently so that you
can retrieve and insert them when
composing an SMS message.
Creating a template
1. Press . If one has been
already stored, press  and
select Add new.
2. Enter a message and press [Centre].
3. Press  to confirm the deletion.
Using template options
Text message (Menu 4.6.1)
From the template list, press  to
access the following options:
• Send: send the template via SMS.
• Add new: add a new template.
• Edit: edit the selected template.
• Delete: delete the selected template or
all templates.
You can configure the default SMS settings.
• Settings x: set up the SMS server
properties.
The following properties are available:
Centre address: store or change the
number of the SMS server.
Expiration: set the length of time your
messages are stored in the SMS server.
Default type: set the default message
type. The network can convert messages
into the selected format.
Name: enter a profile name.
• Sending options: set up the options for
sending SMS messages:
Reply path: allow recipients to reply to
you through your SMS server.
Messages (Menu 4)
Use this menu to delete messages in each
message folder all at once.
1. Press [Centre] to select the message
folders to be cleared.
Pressing the key twice displays the
message types so that you can specify
the ones to be cleared.
2. Press .
Use this menu to set up various options for
using messaging service.
Menu functions
Delete all (Menu 4.5)
Message settings (Menu 4.6)
53
Menu functions
•
54
Delivery report: set the network to
inform you when your messages have
been delivered.
Network selection: select a preferred
data transmission method, either GSM
(CS only) or GPRS (PS preferred)
network.
Keep a copy: leave the copies of your
messages in the Sentbox folder after
sending.
Character support: select a character
encoding type. If you select Automatic,
the phone switches the encoding type
from GSM alphabet to Unicode if you
enter a Unicode character. Use of
Unicode encoding will reduce the
maximum of number in a message to
about half. If this menu is not shown,
your phone provides the automatic
encoding by default.
Receiving options: set up the options
for sending SMS messages.
Voice mail (Menu 4.6.2)
You can store or change the number of the
voicemail server.
Broadcast (Menu 4.6.3)
Use this menu to change the settings for the
broadcast message service.
• Receive: enable or disable the reception
of broadcast messages.
• Channel list: specify the channels from
which you receive broadcast messages.
• Language: select the language(s) in
which broadcast messages display.
Memory status (Menu 4.7)
•
Use this menu to view the memory
status for SMS and cell broadcast
messages.
i-mode
(Menu 5)
In this menu, you can use the i-mode
browser, send or receive i-mail and i-mms
message, and access Java applications.
i-Menu (Menu 5.1)
About i-mode
In i-mode, browse through your favourite
magazines, book tickets and hotels for your
vacations, find your favourite club, download
the best ringtones and games at the lowest
price, send live e-mails with photographs.
You can do all of these economically since
with i-mode you are charged by the amount
of data you send and receive, not by the
length of time you are online.
Press
scroll through
browser items
[Up] or [Down].
select an item
[Centre].
return to the previous [Left].
page
• Key operations on an i-mode screen
depend on the screen contents at that
time.
• You can answer a call while using the imode feature. After ending the call, the
display returns to the function screen you
were using.
i-mode (Menu 5)
Use this menu to access the i-mode browser.
You can quickly launch the browser by pressing
 in Idle mode.
To
Menu functions
To access this menu, press [Centre] in Idle
mode and select i-mode.
Navigating the web
Using browser options
From any web page, press  to
access the following options; If necessary,
select Browser Menu:
• Add Bookmark: add a bookmark for the
current page.
55
Menu functions
•
•
•
•
•
•
•
•
•
•
•
56
Save Page: save the URL address of the
current page.
Save Image: save images from the
current page.
Show Properties: access the properties
for the i-mode browser.
Bookmark List: access the bookmark
list.
Go to Webpage: enter a URL address or
select one from the Address history list.
Saved Page List: access the list of the
URL addresses you have saved.
Browser Settings: change the settings
for the i-mode browser to suit your
preferences.p. 65
i-Menu: access the homepage of your
service provider.
Home: return to the homepage.
Reload: update the current page.
Compose Mail: send the URL address of
the current page via i-mail or i-mms.
•
•
•
Save in Phonebook: save the selected
phone number or e-mail address to
Phonebook.
Play Animation: play animations on the
current page.
Sound effect: turn the sound effect on
or off.
Exiting the i-mode browser
To exit the browser at any time, press [
].
Mail (Menu 5.2)
Use this menu to use i-mail and i-mms
messaging services. You can quickly access
this menu by pressing  in Idle mode.
Compose i-mail (Menu 5.2.1)
You can create and send a mail, attaching
various types of media files.
Creating and sending an i-mail
1. Select the Destination field.
2. Enter a phone number or e-mail address
and press [Centre].
3. Select the Title field.
According to the Digital Rights
Management (DRM) system, web
content may not be able to be
forwarded.
Attach Melody: add MFi (Melody
Format for i-mode) melody files.
• Attach Bookmark: add URL
addresses you have bookmarked.
You can delete or preview the added
items by selecting Delete Attach File or
Play/Display File.
7. Select the Text field.
8. Enter the mail text and press [Centre].
To insert pictograms into text, press
 and select Pictographic.
You can use the copy and paste feature
to quickly and easily enter text.
next section
Copying and pasting text
1. While entering text in a mail, place the
cursor where you wish.
2. Press  and select Copy.
3. Press .
4. Highlight the text as you want by
pressing the Navigation keys and press
[Centre].
5. Select Copy to copy the highlighted text.
You can also copy all text in the message
by selecting Copy all.
6. Place the cursor where you want to paste
the copied text.
7. Press  and select Paste.
i-mode (Menu 5)
•
9. When you have finished, select Send to
send the mail.
Menu functions
4. Enter the mail title and press [Centre].
5. Select the attachment field.
6. Use the following options to add files:
• Attach File: add images, sounds,
videos, music files, name cards, or
schedule items.
Using mail options
While creating a mail, press  to
access the following options:
• Send: send the mail.
• Save: save the mail in the Draft box.
• Add Address: add destination numbers
or addresses.
57
Menu functions
•
•
•
•
•
Address Menu: edit destination number
or addresses. You can change the
selected number or address to another,
or change an address type (To, Cc, Bcc).
Attach File Menu: add media files,
name cards, schedule items, or
bookmarks.
Attach Signature: attach your
signature, as specified in the Edit
Signature option of Mail settings.
Delete Body: delete the body of the
mail.
Delete Mail: cancel composing the mail.
Compose i-mms (Menu 5.2.2)
Using Multimedia Message Service (MMS),
you can send and receive i-mms messages
containing a combination of text, image,
video, and audio, from phone to phone or
from phone to e-mail.
Creating and sending an i-mms
message
1. Select the Destination field.
2. Enter a phone number or e-mail address
and press [Centre].
58
3. Select the Title field.
4. Enter the message title and press
[Centre].
5. Select the SMIL field.
6. Use the following options for creating an
SMIL slide:
• Media: add text, images, sounds, or
videos.
According to the Digital Rights
Management (DRM) system, web
content may not be able to be
forwarded.
•
Fit Mode: select the size in which
the image displays.
Hidden: the image displays in its
actual size.
Fill: the image is scaled to fit into the
display area.
Meet: the image is scaled so that the
longer side, either the height or
width, fits the corresponding side of
the display area.
•
Using message options
While creating an i-mms message, you can
access a variety of options by pressing
.p. 57
i-mode (Menu 5)
•
Insert: insert a new slide before the
currently selected slide.
Delete: delete the selected slide.
Clear: clear the content of the
selected slide.
7. When you have finished, on the slide
preview screen, press  and
select Send to send the message.
Menu functions
•
Slice: the image is scaled so that the
shorter side, either the height or
width, fits the corresponding side of
the display area.
Options: change the display time for
each item in the message, such as a
slide, text, image, or audio clip.
Arrange Slide: customise slide
settings.
Text Color: select a colour for the
message text.
Background Color: select a colour
for the slide background.
Change Region Size: change the
size of the image area. Press [Up] or
[Down] to move the border line.
Swap Position: switch the order of
the added image and text.
Slide: add or delete a slide.
Add: add a new slide after the
currently selected slide. Once you
have added slides, you can scroll
between them by pressing [Left] or
[Right].
Inbox (Menu 5.2.3)
Use this menu to access i-mails and i-mms
messages you have received.
When the Inbox reaches its maximum
limit, new i-mails or i-mms messages will
overwrite old messages that have already
been read.
Viewing a message
1. Select a folder.
2. Select a message.
3. Press [Left] or [Right] to scroll through
slides.
59
Menu functions
Using message options
While viewing an i-mail or i-mms message,
press  to access the following
options:
• Reply: send a reply to the sender or all
of the recipients of the message. You can
also send a reply with the message
included.
• Forward: forward the message to other
people.
• Move: move the message to another
folder.
• Delete: delete the message.
• Protect On/Off: protect the message
from being deleted.
• Save in Phonebook: save the sender’s
address or phone number to Phonebook.
• Save Melody: save the MFi (Melody
Format for i-mode) melody files attached
to the message.
• Save Attached File: save the attached
files in the phone’s memory.
• Copy: copy the message title or sender’s
address. You can also copy the text of
the mail.
60
•
•
Play SMIL: play the SMIL slides of an
i-mms message automatically.
Browse SMIL: play the SMIL slides of
an i-mms message manually. Press
[Left] or [Right] to move to the next
slide.
On the message list, press  to
access the following options:
• Move: move the selected message to
another folder.
• Delete: delete the selected message.
• Selective Delete: delete the messages
you select.
• Delete All: delete all messages.
• Protect On/Off: protect the message
from being deleted.
• Sort: sort messages by title, address, or
date.
• Filter: set messages to be displayed by
the selected filter.
• Export: save the selected message in
the phone’s memory. The message is
saved in the My vMessage folder.
p. 72
Sent (Menu 5.2.4)
Use this menu to access the i-mails and imms messages you have sent.
•
•
•
i-mode (Menu 5)
On the message list, press  to
access the following options:
• Edit: edit the message.
• Delete: delete the selected message.
•
•
Selective Delete: delete the messages
you select.
Delete all: delete all messages.
Protect On/Off: protect the message
from being deleted.
Sort: sort messages by title, address, or
date.
Filter: set messages to be displayed by
the selected filter.
Export: save the selected message in
the phone’s memory. The message is
saved in the My vMessage folder.
p. 72
Menu functions
While viewing a message, press 
to access the following options:
• Edit: edit the message and then send it.
• Delete: delete the message.
• Protect On/Off: protect the message
from being deleted.
• Save in Phonebook: save the sender’s
address or phone number to Phonebook.
• Copy: copy the message’s title or
sender’s address.
• Play SMIL: play the SMIL slides of an imms message automatically.
• Browse SMIL: play the SMIL slides of
an i-mms message manually. Press
[Left] or [Right] to move to the next
slide.
•
Draft (Menu 5.2.5)
Use this menu to access i-mails and i-mms
messages you have saved before sending.
When you select a message in the Draft box,
the message opens in Edit mode so that you
can edit and send the message.
Check New Mail (Menu 5.2.6)
Use this menu to check the i-mode server
for new i-mails and i-mms messages and
then retrieve them to the phone.
61
Menu functions
Mail Settings (Menu 5.2.7)
Use this menu to change the various
settings for sending and receiving i-mails
and i-mms messages.
• Communication: change the settings
for sending or receiving messages.
Auto Receive: set the phone to retrieve
new messages from the i-mail server as
soon as they arrive at the server.
Selected Retrieval: select the server
from which you want to receive i-mails or
i-mms messages.
Receive Attach File: select the types of
attachments you want to receive.
• Edit: use the edit settings.
Edit Signature: edit a tag line to be
inserted at the end of your message. If
you select Auto Attach, the signature
will be automatically attached to all of
your outgoing messages.
Edit Quotation: edit characters or
words to be inserted at the start of your
original message when you reply to or
forward a message.
62
•
•
•
View: change the view settings.
Screen Scroll: select the number of
lines a message displays.
Font Size: select a font size to be used
for displaying messages.
List Display: select the number of lines
and the type of information, for example,
subject or address, to be displayed on
the list.
Folder Security: lock message folders
to protect them from unauthorised
viewing.
Auto Play: set a sound, video, or SMIL
slide to be automatically played when
you open a message.
Pasted Data: set MFi (Melody Format
for i-mode) melody files to be inserted
when you are creating a message. The
added data, however, will be sent as a
data format attachment.
Check Settings: check your current
mail settings.
Reset Settings: restore the default
settings.
•
Check Storage: check the total amount
of memory and the amount of memory
currently in use in each message folder.
Java (Menu 5.3)
•
•
•
•
•
i-mode (Menu 5)
On the Java application list, press
 to access the following Java
system options:
• Create Folder: create a folder
• Delete Folder: delete the selected
folder.
• Rename Folder: change the name of
the folder.
• Move To Folder: move the selected
Java application into another folder.
• Upgrade: update the selected Java
application.
• Delete: delete the selected Java
application.
• Delete All: delete all Java applications.
•
Sort: sort Java applications by name,
time, used memory.
Properties: access the properties of the
Java application.
Certificate: access the application
certificate.
Network Setting: select whether or not
the Java application connects to the
network when it runs, if the selected one
is an online application.
i-Appli To Setting: set whether or not
the selected Java application accesses
the website to run. This option is
available only when the
LaunchByBrowser key or the
AllowPushBy key is present in the ADF.
Icon Info Setting: set whether or not
your phone operates the selected Java
application using phone system
information. This option is available only
when the GetSysInfo key is present in
the ADF.
AutoStart Setting: select whether or
not the Java application launches
automatically when selected.
Menu functions
Use this menu to download and play games
and Java applications from various sources
using the i-mode browser.
•
63
Menu functions
•
•
•
•
Show Desc Setting: set whether or not
the description of a Java application is
displayed before downloading.
AutoStart Failure: set whether or not
the Java application launches
automatically after the launch fails.
Trace Info: access trace information for
a Java application.
System Info: access system
information for a Java application.
SMS (Menu 5.4)
•
•
•
•
Selective Delete: delete the messages
you select.
Delete All: delete all bookmarks.
Show Address: display URL addresses
you have bookmarked.
Copy Address: copy the URL address of
the bookmark.
Compose Mail: send the bookmark via
i-mail or i-mms.
Go to Webpage (Menu 5.6)
Use this menu to create and send text
messages. p. 48
Use this menu to access a specific website
by manually entering a URL address or
selecting one from the Address history list.
Bookmarks (Menu 5.5)
Saved Pages (Menu 5.7)
Use this menu to access URL addresses of
websites you have bookmarked while
navigating the wireless web.
Use this menu to access the list of the web
pages you have saved.
Press  to access the following
options:
• Go To: go to the bookmarked page.
• Title: edit the title of the selected
bookmark.
• Delete: delete the selected bookmark.
64
•
While viewing a page, press  to
access the following options:
• Save Image: save images from the
current page.
• Show Properties: access various page
and server properties.
•
On the page list, press  to access
the following options:
• Show: open the selected page.
• Edit Title: change the title of the
currently selected page.
• Delete: delete the selected page.
• Selective Delete: delete the messages
you select.
• Delete All: delete all saved pages.
•
Show Address: display the address of
the current page.
Protect On/Off: protect the page from
being deleted.
Browser Settings (Menu 5.8)
Use this menu to change the settings for the
i-mode browser to suit your preferences.
• Home: enable or disable the homepage
of the i-mode browser.
• View: change the view settings for text
and display on web pages.
Font Size: select a font size to be used
for displaying text on web pages.
Images: set whether or not the phone
displays images on web pages.
Table Layout: select a layout for the
web page.
CSS: set whether or not the phone uses
a style sheet for presenting documents
on web page.
Screen Scroll: select the number of
lines the web page displays.
i-mode (Menu 5)
•
•
•
•
Menu functions
•
Address: access the URL address of the
current page.
Page Properties: access the properties
of the current page.
Certificates: access the server
certificate.
Play Animation: play animations on the
current page.
Sound effect: turn the sound effect on
of off.
Edit Title: change the title of the page.
Delete: delete the page.
Protect On/Off: protect the page from
being deleted.
65
Menu functions
•
•
•
•
66
Certificates: view the list of server
certificates you have received while
navigating the wireless web, or switch
the selected certificate from valid to
invalid, or vice versa.
Others: change other settings.
Connection Timeout: set the phone to
disconnect from the network after a
specified length of time of inactivity.
Send Terminal Info: set whether or not
the phone sends its information to the
web server while navigating the wireless
web.
Auto Play: set whether or not the phone
automatically plays videos after
download.
Sound Effect: turn the sound effect on
or off.
Storage Device: Select default storage
of download file.
Check Settings: check your current
settings.
Reset Settings: restore the default
settings.
My files
(Menu 6)
The My files menu allows you to access
images, videos, music files, sound files, and
documents stored in the phone’s memory
and on a memory card.
To access this menu, press [Centre] in Idle
mode and select My files.
Tips for Digital Rights Management
As a result of the Digital Rights Management
(DRM) system, some of the media items you
download from the Internet or receive by
MMS may require a licence key to access
them. You can acquire the key from the
website which owns the rights to the
content; use the Activate option.
Note the following icons on the list:
•
: Forwardable item with a valid key.
•
: Forwardable item without a valid
key.
•
: Unforwardable item with a valid
key.
•
: Unforwardable item without a valid
key.
Your service provider supports only countbased or unlimited-access DRM files.
Images
Viewing an image
1. Scroll to an image folder.
2. Select an image.
Viewing a slide show
Editing a photo
1. Select a photo.
2. Press  and select Edit.
3. Press  and edit the photo
using the following options:
• Resize: change the image size.
My files (Menu 6)
You can view your images as a slide show, a
sequential presentation of each image in the
current folder.
1. Select an image folder.
2. While viewing an image, press
 and select Slide show.
3. Press . The slide show begins.
4. Press  to stop the slide show.
Effects: change the colour tone or
apply a special effect to the photo.
• Insert: add a decorative frame, an
image, or text.
• Rotate: rotate the photo clockwise
or counterclockwise.
• Flip: flip the photo vertically or
horizontally.
4. When you have finished, press .
5. Press  and select Save as.
6. Enter a photo name and press .
Menu functions
Use this menu to access photos you have
taken and images you have downloaded,
received in messages, or imported from your
computer.
•
Using image options
While viewing an image, press 
to access the following options:
• Send via: send the file via i-mail,
i-mms, or Bluetooth.
• Set as: set the image as wallpaper for
the main display or as a caller ID image
for a Phonebook entry.
• Activate key: get a new licence key
when the key for the selected DRM file
expires.
• Reactivate key: get another licence key
even when the key for the selected DRM
file has not expired.
67
Menu functions
•
•
•
•
•
•
•
•
•
•
Real size: view the image in its actual
size. Press  to fit the
image to the display.
Slide show: view all images as a slide
show.
Edit: edit the image and save it as a
different name.
Delete: delete the file or all files.
Rename: change the file name.
Bluetooth visibility: share the selected
file with other Bluetooth devices.
Print via: print the image by connecting
the phone to a printer via USB or
Bluetooth. Some printers may not be
compatible with the phone.
Lock/Unlock: lock the file to prevent it
from being deleted, or unlock the file.
Details: access the file properties.
Key management: manage the licence
keys you have acquired.
Downloading images
68
1. Scroll to the Downloads folder.
2. Select More photos. You are connected
to the website preset by your service
provider.
3. Search for the file you want and follow
the onscreen instructions to download it.
Videos
Use this menu to access video clips you have
recorded, downloaded, received in
messages, or imported from your computer.
Video clips recorded on other devices, such
as camcorders, may not play correctly.
Playing a video clip
1. Scroll to a video folder.
2. Select a video clip. The video player
opens and the video plays.p. 46
Using video options
From the video list, press  to
access the following options:
• Play: play the selected file.
• Send via: send the file via i-mms,
i-mail, or Bluetooth.
• Set as: set the file as wallpaper for the
main display or as a caller ID image for a
Phonebook entry.
• Copy: copy the selected file or all files to
another folder.
•
•
•
•
•
•
Downloading video clips
1. Scroll to the Downloads folder.
Sounds
Use this menu to access voice memos you
have recorded, and ringtones and music files
you have downloaded, received in
messages, or imported from your computer.
My files (Menu 6)
•
•
•
•
2. Select More videos. You are connected
to the website preset by your service
provider.
3. Search for the file you want and follow
the onscreen instructions to download it.
Menu functions
•
Move: move the selected file or all files
to another folder.
Activate key: get a new licence key
when the key for the selected DRM file
expires.
Reactivate key: get another licence key
even when the key for the selected DRM
file has not expired.
Add to playlist: add the file to the
current play list.
Delete: delete the file or all files.
Rename: change the file name.
Create folder: add a new folder.
Bluetooth visibility: share the selected
file or all of the files in the current folder
with other Bluetooth devices.
Lock/Unlock: lock the file to prevent it
from being deleted, or unlock the file.
Details: access the file properties.
Key management: manage the licence
keys you have acquired.
Playing a sound clip
1. Select a sound folder.
2. Select a sound clip. The music player
opens and the selected sound plays.
p. 44
For a voice memo, see Voice recorder.
p. 47
Using sound options
From the sound list, press  to
access the following options:
• Play via: play the selected music file via
the phone speaker or a Bluetooth stereo
headset.
69
Menu functions
•
•
•
•
•
•
•
•
•
•
•
•
70
Play: play the selected ringtone or voice
memo.
Send via: send the file via i-mms,
i-mail, or Bluetooth.
Set as: set the sound as your ringtone
for voice calls or video calls, or a
ringtone for a Phonebook entry.
Activate key: get a new licence key
when the key for the selected DRM file
expires.
Reactivate key: get another licence key
even when the key for the selected DRM
file has not expired.
Copy: copy the selected file or all files to
another folder.
Move: move the selected file or all files
to another folder.
Delete: delete the file or all files.
Add to playlist: add the file to the
current play list.
Rename: change the file name.
Create folder: add a new folder.
Bluetooth visibility: share the selected
file or all of the files in the current folder
with other Bluetooth devices.
•
•
•
Lock/Unlock: lock the file to prevent it
from being deleted, or unlock the file.
Details: access the file properties.
Key management: manage the licence
keys you have acquired.
Other files
Use this menu to access any other files than
image, video, music, and sound files. Your
phone provides you with Picsel File Viewer to
allow you to view, without corruption,
various document files. Available file formats
are *.doc, *.xls, *.ppt, *.pdf, and *.txt.
Viewing a document
1. Scroll to a document folder.
2. Select a file. Picsel File Viewer runs to
open the document.
• Depending on the file size or memory
capacity of Picsel File Viewer, some files
may not open properly.
• If a document file contains languages
unsupported by Picsel File Viewer, the
content of the document will not display
correctly.
Use the following keys to view the
document:
Function
Up/Down/
Left/Right
Pans around the page.
Zooms in or out.
Fits the document to the
page size.
Returns to the first page.
Returns to the previous page.
Rotates the document.
Moves to the next page.
Moves to the last page.
Changes the display to Full
screen view or Normal screen
view.
My files (Menu 6)
Centre
While viewing a document, press
 or < > to access the following
options:
• Full screen view/Normal view:
change the view mode.
• Zoom: zoom in or out.
• Fit to: fit the document to the page size,
screen width, or screen height.
• Go to: move to another page of the
document.
• Rotate: rotate the document.
• Screen panning/Normal panning:
change the panning mode to by screen
or by preset pixel.
• Hide controller/Show controller: hide
or display the shortcut tool bar in Full
screen view.
• Send via: send the file via Bluetooth.
• Delete: delete the selected file.
• Rename: change the file name.
• Bluetooth visibility: share the file with
other Bluetooth devices.
Menu functions
Key
Using file options
71
Menu functions
•
•
•
Lock/Unlock: lock the file to prevent it
from being deleted, or unlock the file.
Details: access the file properties.
Shortcuts: view the functions of the
keys you can use in Picsel File Viewer.
My vMessage
This menu displays i-mails or i-MMS
messages you have saved from the i-mode
server to the phone’s memory.
Calendar
(Menu 7)
The Calendar menu enables you to keep
track of your schedule.
To access this menu, press [Centre] in Idle
mode and select Calendar.
Selecting a day on the calendar
Use this menu to access the files stored in a
memory card. This menu is shown only
when a memory card is inserted into the
phone.
When you enter the Calendar menu, the
calendar appears with today’s date indicated
by a grey box.
• Press [Left] or [Right] to move by day.
• Press [Up] or [Down] to move by week.
• Press [Up] until the month field is
highlighted and then [Left] or [Right] to
move by month.
Memory status
Creating an item
Use this menu to check the amount of
memory currently in use in each media
folder. You can also access a folder by
selecting it from this menu and delete files.
You can store appointments and
anniversaries on the calendar. More than one
item per day can be stored.
Memory card
Entering an appointment
1. Select a date on the calendar.
2. Press  and select Create →
Appointment.
72
Entering an anniversary
73
Calendar (Menu 7)
1. Select a date on the calendar.
2. Press  and select Create →
Anniversary.
3. Enter information or change the settings:
• Title: enter a title for the
anniversary.
• Details: enter information about the
anniversary.
• Date: enter the date for the
anniversary.
• Alarm: select to set an alarm for the
anniversary.
• before: set how long before the
anniversary the alarm is to alert you.
• Alarm time: enter the time for the
alarm to sound.
• Alarm tone: select an alarm tone.
• Repeat every year: set the phone
to remind you of the anniversary
every year.
4. Press  and select Save to
save the anniversary.
Menu functions
3. Enter information or change the settings:
• Title: enter a title for the
appointment.
• Details: enter appointment details.
• Start date and Start time: enter
the starting time and date for the
appointment.
• End date and End time: enter the
ending date and time for the
appointment.
• Location: enter information about
the appointment location.
• Alarm: set an alarm for the
appointment.
• before: set how long before the
appointment the alarm is to alert
you.
• Alarm tone: select an alarm tone.
• Repeat: set the appointment to
recur and select a repeat option.
• every: set how often you are alerted
to the appointment.
• Expiry: change the expiry settings.
4. Press  and select Save to
save the appointment.
Menu functions
Consulting the calendar
Using calendar options
Once you have scheduled items, the square
brackets appear on the corners of the date
box.
On the calendar, press  to access
the following options:
• View: display the items stored for the
selected date.
• View by: change the view mode of the
calendar.
• Create: create a new item.
• Go to: go to today’s date or enter the
specific date you want to access.
• Event list: sort items by type of item.
• Delete: delete the items stored for the
selected date or all items.
• Settings: change the display settings
for the calendar. You can set the starting
day of the week and the default view
mode.
• Missed alarm events: view events
whose alarms you have missed.
• Memory status: access memory
information for the items stored on the
calendar.
Viewing an item
1. Select a date on the calendar to display
the items for the day.
2. Select an item to view its details.
While viewing an item, press  to
access the following options:
• Edit: access the items stored for the
selected date.
• Send via: send the item via i-mms, imail, or Bluetooth.
• Delete: delete the selected item.
• Settings: change the display settings
for the calendar. You can set the starting
day of the week and the default view
mode.
• Missed alarm events: view events
whose alarms you have missed.
• Memory status: access memory
information for the events stored on the
calendar.
74
Viewing items in a different mode
Camera (Menu 8)
You can change the calendar display to Day
view or Week view. On the calendar, press
 and select View by → a view
mode.
You can use the camera module embedded
in your phone to take photos and record
videos.
If you have set the Repeat and Alarm
options, the
and
icons display. Select
an item to view its details.
Week view
You can view items for the selected week. A
cell on the timetable indicates the presence
of an appointment. Select a cell for the date
you want.
• Do not take photos of people without their
permission.
• Do not take photos in a place where
cameras are not allowed.
• Do not take photos in a place where you
may interfere with another person’s
privacy.
Camera (Menu 8)
You can view items for the selected date.
The following icons may display to indicate
the type:
•
Appointment
•
Anniversary
To access this menu, press [Centre] in Idle
mode and select Camera.
Menu functions
Day view
Taking a photo
You can take photos in various modes. The
camera produces jpeg photos.
When you take a photo in direct sunlight or
in bright conditions, shadows may appear on
the photo.
1. Access the Camera menu to turn on the
camera and switch the display to Capture
mode. You can also press and hold
[Centre] in Idle mode.
75
Menu functions
2. Make any desired adjustments.
• Press < > to access camera
options.next section
• Use the keypad to change the camera
settings or switch to other modes.
p. 77
3. Press [Centre] or [Camera] to take a
photo. The photo is saved in the Photos
folder.
4. To
Press
use photo options < > or
.
•
p. 78
return to Capture [Centre] or <
mode
>.
Using camera options in Capture
mode
In Capture mode, press < > to access the
following options:
• Take photo: take a photo.
• Record video: switch to Record mode.
• Switch camera: switch between the
camera lens on the front and back.
76
•
•
•
•
•
•
•
Shooting mode: take a photo in the
following modes:
Single shot: take a photo in normal
mode.
Multi-shot: take a series of action stills.
You can select the number of photos the
camera will take.
Mosaic shot: take several stills and
save them in one frame. You can select
the layout.
Effects: change the colour tone or apply
a special effect.
Frames: apply a decorative frame.
Flash: determine the use of the flash.
Timer: set a time delay before the
camera takes a photo.
Zoom: display the zoom control bar and
zoom in or out by pressing [Up] or
[Down].
Brightness: display the brightness
control bar and adjust the brightness by
pressing [Left] or [Right].
Go to My photos: access the Photos
folder.
•
Camera shortcuts: view the functions
of the keys you can use in Capture
mode.
•
Using the keypad in Capture mode
You can use the keypad to customise your
camera settings in Capture mode.
Key
Function
Left/Right
Adjusts the brightness.
Up/Down
Zooms in or out.
Camera (Menu 8)
Menu functions
Settings: change the default settings for
taking a photo. Press [Left] or [Right] to
scroll through the following setting
options:
Size: select an image size.
Quality: select an image quality setting.
Viewfinder: select a preview screen.
White balance: adjust the colour
balance of the image. You can make your
photo appear warmer or cooler.
Shutter sound: select the sound that
you hear when you press the shutter
release.
Multi-shot speed: select the shooting
speed in Multi Shot mode.
Zoom sound: turn the sound effect for
zooming on or off.
Brightness sound: turn the sound
effect for brightness adjustment on or
off.
Default storage: select the memory
location to store photos, if a memory
card is inserted.
Default name: set the default name
prefix for file names.
Switches the camera lens.
Switches to Record mode.
p. 78
Changes the image size.
Changes the image quality.
Changes the shooting mode.
Changes the colour tone or
applies a special effect.
Changes the white balance.
Adds a decorative frame.
Sets the timer.
77
Menu functions
Key
Function
Determines the flash use.
Goes to the Photos folder.
Changes the preview screen.
78
•
•
•
Go to My photos: access the Photos
folder.p. 67
Lock/Unlock: lock the file to protect it
from being deleted, or unlock the file.
Bluetooth visibility: share the file with
other Bluetooth devices.
Details: access the file properties.
Using photo options
•
After saving a photo, press < > or
 to access the following options:
• Send via: send the file via i-mms,
i-mail, or Bluetooth.
• Delete: delete the file.
• View: access one of the multi-shot
photos.
• Viewfinder: return to Capture mode.
• Set as: set the photo as wallpaper for
the display or as a caller ID image for a
Phonebook entry.
• Edit: edit the photo by using various
tools.p. 67
• Rename: change the file name.
Recording a video
You can record a video of what is displayed
on the screen and save it.
1. Access the Camera menu to turn on the
camera and switch the display to Capture
mode. You can also press and hold
[Camera] in Idle mode.
2. Press [1] to switch to Record mode.
3. Make any desired adjustments.
• Press < > to access camera
options.next section
• Use the keypad to change the camera
settings or switch to other modes.
p. 80
4. Press [Centre] to start recording.
5. Press < > to stop recording. The video
is saved in the Videos folder.
6. To
Press
•
•
•
•
use video options
.
p. 81
•
return to Record
mode
.
Using camcorder options in Record
mode
In Record mode, press < > to access the
following options:
• Record video: start recording.
• Take photo: switch to Capture mode.
• Switch camera: switch between the
camera lens on the front and back.
•
•
Camera (Menu 8)
[Centre].
Menu functions
play back the
video clip
Effects: change the colour tone or apply
a special effect.
Flash: determine the use of the flash.
Timer: set a time delay before the
camera starts recording.
Zoom: display the zoom control bar and
zoom in or out by pressing [Up] or
[Down].
Brightness: display the brightness
control bar and adjust the brightness by
pressing [Left] or [Right].
Go to My video clips: access the
Videos folder.
Settings: change the default settings for
recording a video. Press [Left] or [Right]
to scroll through the following settings
for recording a video:
Recording mode: select a video
recording mode. Selecting Limit for
MMS allows you to record a video for
adding an MMS message.
Size: select a frame size.
79
Menu functions
•
Quality: select an image quality setting.
White balance: adjust the colour
balance of the image. You can make your
photo appear warmer or cooler.
Record audio: record a video with
audio.
Brightness sound: turn the sound
effect for brightness adjustment on or
off.
Zoom sound: turn the sound effect for
zooming on or off.
Default storage: select the memory
location to store videos, if a memory
card is inserted.
Default name: set the default name
prefix for file names.
Camcorder shortcuts: view the
functions of the keys you can use in
Record mode.
Using the keypad in Record mode
You can use the keypad to customise your
camera settings in Record mode.
Key
Function
Left/Right
Adjusts the brightness.
Up/Down
Zooms in or out.
Switches the camera lens.
Switches to Capture mode.
p. 75
Changes the frame size.
Changes the image quality.
Changes the video recording
mode.
Changes the colour tone or
applies a special effect.
Changes the white balance.
Mutes or unmutes audio.
Sets the timer.
Determines the flash use.
80
Goes to the Videos folder.
Bluetooth (Menu 9)
After saving a video clip, press 
to access the following options:
• Play: play back the video clip.
• Send via: send the file via i-mms,
i-mail, or Bluetooth.
• Delete: delete the file.
• Viewfinder: return to Record mode.
• Rename: change the file name.
• Go to My video clips: access the
Videos folder.p. 68
• Lock/Unlock: lock the file to protect it
from being deleted, or unlock the file.
• Bluetooth visibility: share the file with
other Bluetooth devices.
• Details: access the file properties.
Using the Bluetooth feature, you can
connect the phone wirelessly to other
Bluetooth devices and exchange data with
them, talk hands-free, or control the phone
remotely.
Menu functions
Using video options
Bluetooth (Menu 9)
Bluetooth technology allows free wireless
connections between all Bluetooth-compliant
devices within a range of 10 meters. Since
the devices communicate using radio waves,
they do not need to be in line of sight to
each other.
• If there are obstacles between the
devices, the operating distance may be
reduced.
• It is recommended that you do not use
the Bluetooth feature while using
multimedia features, such as voice
recorder, camera, and media player, or
vice versa, for better performance.
• Some devices, especially those that are
not tested or approved by SIG, may be
incompatible with your phone.
To access this menu, press [Centre] in Idle
mode and select Bluetooth.
81
Menu functions
Setting up the Bluetooth feature
The Bluetooth menu provides the following
options:
• Activation: activate or deactivate the
Bluetooth feature.
• My devices: search for connectable
Bluetooth devices.
• My phone’s visibility: allow other
Bluetooth devices to locate your phone,
or not.
• My phone’s name: assign a Bluetooth
device name to your phone, which is
then displayed on other devices.
• Secure mode: determine if the phone
asks for your confirmation when other
devices access your data.
• Bluetooth services: display available
Bluetooth services.
82
Searching for and pairing with a
Bluetooth device
1. From the Bluetooth menu, select My
devices.
2. Select Search for new devices.
After searching, a list of devices to which
you can connect displays. The following
icons indicate the type of device:
•
Headset
•
Hands-free car kit
•
Computer
•
Printer
•
Mobile phone
•
PDA
•
Unknown device
The colour of the icon indicates the
status of the device:
• Grey for unpaired devices
• Blue for paired devices
• Orange for devices that are currently
connected to your phone
Some devices, especially headsets or handsfree car kits, may have a fixed Bluetooth
PIN, such as 0000. If the other device has a
code, you must enter it.
From the device list, press  to
access the following options:
• Connect: connect to a headset or
hands-free car kit.
• Disconnect: end the connection with
the connected device.
• Browse files: search for data from the
device and import data directly to your
phone.
• Service list: access the Bluetooth
service list of the device.
•
Rename: rename the paired device.
Authorise device/Unauthorized
device: determine whether or not the
phone asks you to permit connection
when other devices try to connect to
your phone.
Delete: remove the selected device or
all devices from the list.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item
you want to send is stored.
3. Scroll to the item you want and press
.
4. Select Send namecard via/Send via →
Bluetooth.
The phone searches for devices within
range and displays a list of available
devices.
5. Select a device.
6. If necessary, enter the Bluetooth PIN
needed for pairing and press .
Bluetooth (Menu 9)
Using device options
•
•
Menu functions
3. Select a device.
4. Enter a Bluetooth PIN and press .
This code is used just once and you don’t
need to memorise it.
When the owner of the other device
enters the same code, pairing is
complete.
83
Menu functions
Receiving data via Bluetooth
Using Java application options
To receive data via Bluetooth, your phone’s
Bluetooth feature must be active and its
visibility must be enabled.
1. If an unauthorised Bluetooth device
sends data to your phone, press 
to allow the device to access your phone.
2. Press  to receive data.
From the application list, press 
to access the following options:
• Create Folder: add a new folder.
• Delete Folder: delete the selected
folder.
• Rename Folder: change the name of
the folder.
• Move To Folder: move the selected
Java application to another folder.
• Upgrade:
• Delete: delete the selected application
or all applications, except for embedded
games.
• Delete All: update the selected Java
application.
• Sort: sort Java applications by name,
time, used memory.
• Properties: access the Java application
properties.
• Certificate: access the Java application
certificate.
Applications
(Menu *)
Use the Applications menu to use the
calculator, converter, world clock, task list,
or memo pad. You can also view a tube map.
To access this menu, press [Centre] in Idle
mode and select Applications.
Java (Menu *.1)
Use this menu to access the embedded Java
games and downloaded Java applications.
Accessing a game
Select a game from the game list and follow
the onscreen instructions. The procedure
may differ from game to game.
84
•
•
•
•
•
Trace Info.: access trace information
for a Java application.
System Info: access system
information for a Java application.
Tube map (Menu *.2)
You can view the tube maps of Berlin,
London, Paris, and Milan.
Viewing a map
Select a city.
• Press [Centre] to zoom in on different
sections of the map.
• Press  to zoom out.
• Press the Navigation keys to move to
different sections of the map.
Applications (Menu *)
•
•
Menu functions
•
Network Setting: select whether or not
the Java application connects to the
network when it runs, if the selected one
is an online application.
i-Appli To Setting: set whether or not
the selected Java application accesses
the website to run. This option is
available only when the
LaunchByBrowser key or the
AllowPushBy key is present in the ADF.
Icon Info Setting: set whether or not
your phone operates the selected Java
application using phone system
information. This option is available only
when the GetSysInfo key is present in
the ADF.
AutoStart Setting: select whether or
not the Java application launches
automatically when selected.
Show Desc Setting: set whether or not
the description of a Java application is
displayed before downloading.
AutoStart Failure: set whether or not
the Java application launches
automatically after the launch fails.
Using tube map options
On the tube map screen, press 
to access the following options:
• Zoom in: zoom in on the map.
• Zoom out: zoom out.
• Search: search for the station you
entered.
85
Menu functions
•
•
Settings: set the tube map settings.
Set default city: select a default tube
map. If you select Always ask, the
phone will display the city selection
screen each time you access this menu.
Map on: set whether the phone shows
the thumbnail on the enlarged map.
Help: view the help screen for using the
tube map.
Calculator (Menu *.3)
Use this menu to perform basic arithmetic
functions, such as addition, subtraction,
multiplication, and division.
1. Enter the first number.
• Press <.()> to insert a decimal point
or bracket.
• Press [ ] or [ ] to move the cursor.
2. Press one of the Navigation keys to
access the math function you want.
3. Enter the second number.
4. Press [Centre] to view the result.
5. If necessary, repeat from step 2 to
continue the calculation.
86
Converter (Menu *.4)
Use this menu for common conversions,
such as currency and temperature.
Performing a conversion
1. Select a converter.
2. Press [Left] or [Right] to select the
original unit and press [Down].
3. Enter the value to be converted and
press [Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature
to above zero (+) or below zero (-).
4. Press [Left] or [Right] to select the unit
to which you want to convert.
The equivalent value for the amount you
entered displays.
Using converter options
Press  to access the following
options:
• Clear: clear the current values.
• Reverse: reverse the conversion.
• Currency rates: display the currency
rate list.
Use this menu to set your local time zone
and find out the current time in another part
of the world.
You can set clocks for the two time zones
selected in World clock on the idel screen.
1. From the world map, move to the lower
line ( ).
2. Press  and select Dual time
display.
3. Set each option.
• Dual time: activate the dual clock
display.
• Dual time type: Select the colour of
clocks.
4. Press .
Setting the local time zone
1. From the world map, press [Left] or
[Right] to scroll to the city you want on
the upper line ( ). As the time line
moves, the time and date of the given
zone display.
2. Press [Centre] to save the city as your
local time zone.
Viewing world time
1. From the world map, move to the lower
line ( ).
2. Press [Left] or [Right] to scroll to the city
you want.
3. Press [Centre] to save the time zone.
Applying daylight saving time
1. From the world map, press 
and select Daylight saving.
2. Press [Centre] to select the time zones
you want.
3. Press .
Applications (Menu *)
Setting the dual clock display
Menu functions
World clock (Menu *.5)
Task (Menu *.6)
You can create a list of tasks you need to
complete.
Entering a task
1. Press  and select Create.
2. Enter information or change the settings:
• Title: enter a subject of the task.
• Details: enter information about the
task.
• Start date: enter the starting date.
87
Menu functions
• Due date: enter the ending date.
• Priority: select a priority level.
3. Press  to save the task.
Viewing a task
From the task list, the triangle icons on the
right indicate the importance; the lower the
number on the icon, the higher the priority.
A check mark appears in the status check
box if the task has been completed.
Select a task from the list.
Using task options
From the task list, press  to
access the following options:
• View: access the selected task.
• Create: add a new task.
• Send via: send the task as a data file
via i-mail, i-mms, or Bluetooth.
• Done/Not done: change the status of
the task.
• Delete: delete the selected task or all
tasks.
• Memory status: access memory
information for tasks and memos you
have stored.
88
Memo (Menu *.7)
You can create a list of memos.
Creating a memo
1. Press  and select Create.
2. Enter the memo contents and press
.
Viewing a memo
When you access the Memo menu, the list
of the memos you have created displays.
Select a memo from the list.
Using memo options
From the memo list, press  to
access the following options:
• View: access the selected memo.
• Create: add a new memo.
• Send via: send the memo as a data file
via i-mail, i-mms, or Bluetooth.
• Delete: delete the selected memo or all
memos.
• Memory status: access memory
information for tasks and memos you
have stored.
This menu is available if you use a SIM AT
card that supports SIM Application Toolkit
menus and provides additional services,
such as news, weather, sports,
entertainment, and location services.
Available services may vary, depending on
your service provider’s plans. For details,
see your USIM/SIM card instructions or
contact your service provider.
The alert type for an alarm corresponds to
the call alert type settings.
1. Select an alarm. If necessary, press
 and select Create alarm to
add a new alarm.
2. Set each alarm option:
• Alarm name: enter the alarm name.
• Alarm activation: activate the
alarm.
• Alarm time: enter the time for the
alarm to sound.
• Alarm type: select an alert type.
• Alert tone: select an alarm tone.
• Alarm volume: set the alarm
volume.
• Recurrence: select the days on
which you want the alarm to sound.
If you select Once only, the alarm
sounds at the specified time and then
is deactivated.
• Snooze: set the alarm to sound
again after 5 minutes.
Memory status (Menu *.9)
You can access memory information for
tasks and memos you have stored.
Alarms
(Menu 0)
Use this menu to set alarms to sound at
specified times to remind you of important
events or wake you up in the morning.
To access this menu, press [Centre] in Idle
mode and select Alarms.
89
Alarms (Menu 0)
Setting an alarm
Menu functions
SIM AT (Menu *.8)
Menu functions
•
•
Repeat: select a repeat option.
Auto power-up: set the alarm to
sound when the phone is off.
3. Press .
Stopping an alarm
When the time for an alarm comes and the
alarm sounds:
• Press any key.
• For the alarms with the snooze feature
enabled, press any key, except for 
and [Centre], to cause it to sound again
after 5 minutes.
Deactivating an alarm
When you do not need an alarm any longer,
you can deactivate it.
1. Select the alarm you want to deactivate.
2. Select Off on the Alarm activation line
and press .
90
Settings (Menu #)
The Settings menu provides you with
various setting options to customise the
phone to your preferences and needs. You
can also reset the settings to their default
status.
To access this menu, press [Centre] in Idle
mode and select Settings.
Phone settings (Menu #.1)
Many different features of your phone’s
system can be customised to suit your
preferences.
Some menus may not be available,
depending on your service provider.
Phone profiles (Menu #.1.1)
Your phone provides you with sound profiles
that allow you to quickly and easily change
the sound settings of the phone for different
events or situations. Use this menu to adjust
the properties of each profile and activate
the profile you need.
•
Settings (Menu #)
•
Minute minder: set the phone to
beep every minute during an
outgoing call to keep you informed of
the length of your call.
Call connect tone: set the phone to
beep when an outgoing call is
connected to the system.
Call end tone: set the phone to
beep when a call is disconnected by
the other person or due to a faded
signal.
Power on: set the phone to beep
when you turn it on.
Sound effect: cause the phone to
beep when you access Menu mode or
an option list.
Slide up/down: set the phone to
sound when you open or close it.
Alerts on call: set the phone to
beep when you receive a new
message or when the time for an
alarm comes during a call.
Keytones: select a tone which
sounds when you press a key.
Keytone volume: adjust the volume
of the key tones.
Menu functions
Editing a profile
1. Scroll to the profile you want.
2. Press  and select Edit.
3. Change the sound settings:
• Call alert type: select an alert type
for the call ringer.
• Voice call ringtone: select a
ringtone for voice calls.
• V-call ringtone: select a ringtone
for video calls.
• Tone volume: adjust the volume for
the call ringer.
• Msg. alert type: select an alert type
for the message ringer.
• Msg. alert tone: select a ringtone
for the message ringer.
• Msg. alert repetition: select if the
phone repeatedly reminds you of a
new message.
• Phone sounds: turn the various
sounds on the phone on or off.
All: enable all tones.
Popup box alerts: set the phone to
beep when a pop-up window
displays.
91
Menu functions
•
Call answer mode: (for Car) select
how to answer an incoming call.
4. When you have finished, press .
Changing the active profile
From the profile list, select the profile you
want.
Language (Menu #.1.2)
Use this menu to select one of several
languages for the display text and T9 input
mode, separately. If you select Automatic,
the phone uses the same language as the
USIM/SIM card.
Shortcuts (Menu #.1.3)
You can use Navigation keys as shortcuts to
access specific menus directly from Idle
mode. Use this menu to assign a shortcut to
a key.
Assigning a shortcut menu
1. Select a key to be used as a shortcut
key.
2. Select a menu to be assigned to the key.
3. Press .
92
Using shortcut options
Press  to access the following
options:
• Assign: assign a shortcut menu.
• Change: change a shortcut menu
assignment.
• Remove: deactivate the shortcut
assignment to the selected key.
• Remove all: deactivate all shortcut
assignments.
Time & date (Menu #.1.4)
Use this menu to change the time and date
displayed on your phone. Before setting the
time and date, specify your time zone in the
World clock menu.p. 87
• Time zone updating: select one of the
following options:
Prompt first: your phone will read the
MCC (Mobile Country Code) from the
network and automatically update the
current time for the country that you are
in when you travel abroad.
Time information may not be updated
when you move to one time zone to
another within a country.
Auto redial (Menu #.1.5)
Use this menu to set the phone to make up
to ten attempts to redial a phone number
after an unsuccessful call.
When you set Slide down to Continue
operation, the key lock works only in
Idle mode or after the display turns off.
Settings (Menu #)
•
•
•
Use this menu to set how the phone reacts
when you open it for an incoming call, and
when you close it while using a function.
• Slide up: set whether a call is
automatically answered when you open
your phone.
• Slide down: set whether or not the
phone maintains the menu you are using
when you close the phone.
Menu functions
•
•
Automatic: your phone will receive time
information from the network.
Manual only: you can set the time and
date manually.
Date: enter the current date.
Time: enter the current time. To select
AM or PM for 12-hour time format, press
[Right].
Time format: select a time format.
Date format: select a date format.
Daylight saving: select to apply
daylight saving time.
Slide settings (Menu #.1.6)
Any key answer (Menu #.1.7)
Use this menu to answer an incoming call by
pressing any key, except for  and
[ ].
Volume key in incoming call
(Menu #.1.8)
Use this menu to set whether the phone
mutes the call ringer or rejects a call if you
press and hold [ / ] when a call comes in.
93
Menu functions
Display settings (Menu #.2)
Keypad light (Menu #.2.3)
Use this menu to change settings for the
display and backlight.
Use this menu to select a keypad backlight
mode. Select one of the following options
from the top line:
• Any time: flash the backlight when you
press any key.
• Night time: use the backlight only
between 5:00 PM and 9:00 AM. Doing
this saves the battery power.
• Custom time: use the backlight during
the period of time you specify.
Main display (Menu #.2.1)
Use this menu to customise the properties of
the main display.
• Greeting message: enter the greeting
that is displayed briefly when the phone
is switched on.
• Wallpaper: select an image to be
displayed on the main display.
• Brightness: adjust the brightness of the
display for varying lighting conditions.
Backlight time (Menu #.2.2)
You can select the length of time the
backlight or display stays on.
• On: select the length of time the
backlight stays on.
• Dim: select the length of time the
display stays on in Dim mode after the
backlight turns off. After a specified time,
the display turns off.
94
Dialling display (Menu #.2.4)
Use this menu to customise the settings for
the numbers entered and the background
colour of the display while dialling.
Main menu style (Menu #.2.5)
You can select a display style for the main
menu screen.
Skin (Menu #.2.6)
You can select a skin colour pattern for Menu
mode.
This network service reroutes incoming calls
to a phone number that you specify.
1. Select the type of calls to be diverted.
2. Select a call diverting option:
• Always: divert all calls.
• Busy: divert calls when you are on
another call.
• No reply: divert calls when you do
not answer the phone.
• Not reachable: divert calls when
you are not in your service area or
when your phone is switched off.
• Cancel all: cancel all call diverting
options.
3. Enter the number to which calls are to be
diverted on the Diverts to line.
4. If you selected No reply, move to the
Waiting time line and select the length
of time the network delays before
diverting a call.
Message settings (Menu #.3)
Use this menu to change the default settings
for using the message services. p. 53
Call settings (Menu #.4)
Use this menu to access network services.
Please contact your service provider to
check their availability and subscribe to
them, if you wish.
Show my number (Menu #.4.1)
This network service allows you to prevent
your phone number from being displayed on
the phone of the person being called. If you
select By network, the phone will use the
default setting provided by the network.
Some networks may not allow you to change
this setting.
Settings (Menu #)
Diverts (Menu #.4.2)
Use this menu to block caller ID information
on all incoming calls.
Menu functions
Show caller ID (Menu #.2.7)
95
Menu functions
5. Press  and select Activate.
To deactivate call diverting, select
Deactivate.
Barring (Menu #.4.3)
This network service allows you to restrict
your calls.
1. Select the type of calls to be barred.
2. Select a call barring option:
• All outgoing calls: prohibit all
outgoing calls.
• Outgoing int’l calls: prohibit
international calls.
• Int’l call exc. Home: only allow
calls to numbers within the current
country when you are abroad, and to
your home country.
• All incoming calls: prohibit
incoming calls.
• Incoming calls when roaming:
prohibit incoming calls when you use
your phone outside of your home
service area.
• Cancel all: cancel all call barring
settings, allowing calls to be sent and
received normally.
96
3. Enter the call barring password supplied
by your service provider.
4. Press  and select Activate.
To deactivate call barring, select
Deactivate.
You can change the call barring password
obtained from your service provider. Press
 from the call type list and select
Change password.
Waiting (Menu #.4.4)
This network service informs you when
someone is trying to reach you while you are
on another call.
1. Select the type of calls to which call
waiting option will apply.
2. Press  and select Activate.
To deactivate call waiting, select
Deactivate.
Video call settings (Menu #.4.5)
Use this menu to change the default settings
for using the video call feature.
• Show me: change the video camera
settings for receipt of video calls.
•
Use this menu to change the settings for
using Phonebook.p. 42
Network settings (Menu #.6)
This menu allows you to customise settings
for connecting to a network.
This network service allows you to manually
select the network to be used while roaming
outside of your home area, or to let the
network be chosen automatically. You can
select a network other than your home
network only if there is a valid roaming
agreement between the two.
Network mode (Menu #.6.2)
Use this menu to select the network you
use.
• Automatic: the phone scans for
available networks.
• GSM900/1800: the phone operates in
the combined GSM 900/1800 network.
• GSM1900: the phone operates in the
GSM 1900 network. This option is only
available in the U.S.A.
• UMTS: the phone operates in UMTS (3G
network) networks. You can get a higher
speed connection than on lower
generation networks, and use advanced
data and information services, such as
video calls.
Settings (Menu #)
Phonebook settings (Menu #.5)
Select network (Menu #.6.1)
Menu functions
Optionally: you can select whether or
not the video camera is used each time
you answer a video call.
Always: the camera is always used.
Retry with: set what to do when a video
call does not connect.
Voice call: the phone retries with a
voice call.
Video call: the phone retries with a
video call.
Camera: the phone turns on the camera
and switches to Record mode so that you
can record a video and send it as an MMS
message.
None: the phone does not retry.
97
Menu functions
i-mode settings (Menu #.6.3)
Use this menu to create and customise the imode profiles containing the settings for
connecting your phone to the network. You
need these settings to access the i-mode
browser or send i-mails and i-mms
messages.
Your phone is set up by default for
connecting to the network. If you change the
settings without first checking with your
service provider, the i-mode browser, i-mail,
and i-mms features may not work properly.
1. Press [Left] or [Right] to select a profile
in the Select profile line.
2. Specify each information:
• Profile name: enter a profile name.
• Proxy host: enter the host name of
the proxy server for accessing the
i-mode browser.
• Proxy port: enter the port number
of the proxy server for accessing the
i-mode browser.
• SSL port: enter the port number of
the SSL (Secure Sockets Layer)
server.
98
Portal URL: enter the URL address
of the i-mode server.
• Location server URL: enter the URL
address of your network cell.
• Mail server: enter the URL address
of the i-mail server.
• i-mms server: enter the URL
address of the
i-mms server.
• APN: enter the access point used for
the address of the GPRS network.
• User ID: enter the user ID required
to connect to the GPRS network.
• User password: enter the password
required to connect to the GPRS
network.
3. Press .
•
Streaming settings (Menu #.6.4)
Use this menu to set up and customise a
connection profile for accessing streaming
servers.
1. Press [Left] or [Right] to select a profile
in the Select profile line.
2. Specify each information:
• Profile name: enter a profile name.
•
•
•
•
•
Press .
Security (Menu #.7)
Use this menu to protect the phone against
unauthorised use by managing the several
access codes of your phone and USIM/SIM
card.
Phone lock (Menu #.7.1)
Use this menu to protect the phone from
unauthorised use. When this feature is
enabled, you must enter a 4- to 8-digit
phone password each time the phone is
switched on.
Settings (Menu #)
•
If you enter an incorrect PIN/PIN2 three
times, the USIM/SIM card is blocked. To
unblock it you need to enter your PUK/PUK2
(Personal Unblocking Key). The codes are
supplied by your service provider.
Menu functions
•
Proxy host: enter the host name of
the proxy server for accessing the
streaming server.
Proxy port: enter the port number
of the proxy server.
Portal URL: enter a portal URL
address.
APN: enter the access point name
used for accessing the streaming
server.
User ID: enter the user ID required
to connect to the GPRS network.
User password: enter the password
required to connect to the GPRS
network.
Use Proxy: select to activate the
proxy server.
The password is preset to 00000000. To
change the password, use the Change
phone password menu.
SIM lock (Menu #.7.2)
This menu allows your phone to work only
with the current USIM/SIM by assigning a
SIM lock code. You must enter the SIM lock
code to use a different USIM/SIM card.
PIN lock (Menu #.7.3)
The 4- to 8-digit PIN (Personal Identification
Number) protects your USIM/SIM card
against unauthorised use. When this feature
is enabled, the phone requires your PIN each
time it is switched on.
99
Menu functions
i-mode lock (Menu #.7.4)
Change PIN2 code (Menu #.7.9)
Use this menu to activate or deactivate the
i-mode feature.
If supported by your USIM/SIM card, use
this menu to change your current PIN2.
Fixed dialling mode (Menu #.7.5)
Mobile Tracker (Menu #.7.10)
If supported by your USIM/SIM card, Fixed
Dialling Number (FDN) mode restricts your
outgoing calls to a limited set of phone
numbers. When this feature is enabled, you
can make calls only to phone numbers
stored on the USIM/SIM card.
When someone tries to use your phone with
another SIM card, the phone will
automatically send the preset tracking
message to your family or friends. You can
check the phone number from which the
messages are sent and then track your
phone. This feature is useful when the phone
is stolen or lost.
Change phone password (Menu #.7.6)
Use this menu to change your phone
password.
Privacy lock (Menu #.7.7)
Use this menu to lock access to messages,
media files, call logs, or Phonebook entries.
When a lock option is enabled, you must
enter the phone password to access the
locked items.
Change PIN code (Menu #.7.8)
Use this menu to change your PIN. The PIN
lock feature must be enabled to change the
PIN.
100
In the Mobile Tracker menu, you can
specify the following options for using the
mobile tracking feature; to access this
menu, you need to enter the phone
password:
• Mobile Tracker: activate or deactivate
the Mobile tracker feature.
• Recipients: specify phone numbers to
which you want to send the tracking
messages.
• Sender: enter the sender’s name.
• Message: check the preset tracking
message text.
Memory settings (Menu #.8)
Memory status (Menu #.8.3)
Use this menu to clear data or to view
memory information in your phone’s
memory. You can also manage the licence
keys you have acquired to activate media
contents locked by DRM systems.
Use this menu to check the amount of
memory being used for storing data, such as
messages, media and document files,
calendar items, applications, memos, or
Phonebook entries.
Clear memory (Menu #.8.1)
Master reset (Menu #.9)
You can delete media files, messages,
Phonebook entries, and calendar items. You
can also delete all data at one time.
1. Press [Centre] to select the data you
want to delete.
2. Press .
3. Enter the phone password and press
.
You can reset the phone’s settings, and clear
all data that you have added.
1. Enter the phone password and press
.
The password is preset to 00000000.
You can change this password.p. 100
The password is preset to 00000000.
You can change this password.p. 100
2. Press . The phone automatically
turns itself off and then back on.
4. Press .
Memory card (Menu #.8.2)
Use this menu to check the amount of
memory being used for storing data on a
memory card.
101
Solve problems
Help and personal needs
To save the time and expense of an
unnecessary service call, perform the simple
checks in this section before contacting a
service professional.
When you switch on your phone, the
following messages may appear:
“Please insert SIM card”
• Be sure that the USIM/SIM card is
correctly installed.
“Phone lock Password”
• The automatic locking function has been
enabled. You must enter the phone’s
password before you can use the phone.
“PIN lock PIN code”
• You are using your phone for the first
time. You must enter the PIN supplied
with the USIM/SIM card.
• The PIN lock feature is enabled. Every
time the phone is switched on, the PIN
has to be entered. To disable this
feature, use the PIN lock menu.
102
“Enter PUK”
• The PIN has been entered incorrectly
three times, and the USIM/SIM card is
now blocked. Enter the PUK supplied by
your service provider.
“No service” or “Network failure”
displays
• The network connection has been lost.
You may be in a weak signal area. Move
and try again.
• You are trying to access an option for
which you have no subscription with your
service provider. Contact the service
provider for further details.
You have entered a number but it was
not dialled
• Be sure that you have pressed [ ].
• Be sure that you have accessed the right
cellular network.
• Be sure that you have not set an
outgoing call barring option.
Your correspondent cannot reach you
• Be sure that your phone is switched on.
([Power] pressed for more than one
second.)
No number is dialled when you re-call a
Phonebook entry
• Use the Search for contacts menu to
ensure the number has been stored
correctly.
• Re-store the number, if necessary.
The battery does not charge properly or
the phone sometimes turns itself off
• Wipe the charging contacts both on the
phone and on the battery with a clean
soft cloth.
If the above guidelines do not help you
to solve the problem, take note of:
• The model and serial numbers of your
phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung
after-sales service.
Health and safety
information
Exposure to Radio Frequency (RF)
Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter
and receiver. It is designed and
manufactured not to exceed the exposure
limits for radio frequency (RF) energy set by
the Federal Communications Commission
(FCC) of the U.S. government. These FCC
exposure limits are derived from the
recommendations of two expert
organizations, the National Counsel on
Radiation Protection and Measurement
(NCRP) and the Institute of Electrical and
Electronics Engineers (IEEE). In both cases,
the recommendations were developed by
scientific and engineering experts drawn
from industry, government, and academia
after extensive reviews of the scientific
literature related to the biological effects of
RF energy.
103
Health and safety information
The exposure limit set by the FCC for
wireless mobile phones employs a unit of
measurement known as the Specific
Absorption Rate (SAR). The SAR is a
measure of the rate of absorption of RF
energy by the human body expressed in
units of watts per kilogram (W/kg). The FCC
requires wireless phones to comply with a
safety limit of 1.6 watts per kilogram (1.6
W/kg). The FCC exposure limit incorporates
a substantial margin of safety to give
additional protection to the public and to
account for any variations in measurements.
SAR tests are conducted using standard
operating positions accepted by the FCC with
the phone transmitting at its highest
certified power level in all tested frequency
bands. Although the SAR is determined at
the highest certified power level, the actual
SAR level of the phone while operating can
be well below the maximum value. This is
because the phone is designed to operate at
multiple power levels so as to use only the
power required to reach the network. In
general, the closer you are to a wireless
base station antenna, the lower the power
output.
Before a new model phone is available for
sale to the public, it must be tested and
certified to the FCC that it does not exceed
104 the exposure limit established by the FCC.
Tests for each model phone are performed in
positions and locations (e.g. at the ear and
worn on the body) as required by the FCC.
The highest SAR values for this model phone
as reported to the FCC are Head: 0.440W/Kg,
Body-worn: 0.354W/Kg.
For body worn operations, this model phone
has been testde and meets the FCC
exposure guidelines when used with a
Samsung accessory designated for this
product or when used with an accessroy that
contains no metal and that positons the
handset a minimum 1.5 cm from the body.
Non-compliance with the above restrictions
may result in violation of FCC RF exposure
guidelines.
SAR information on this and other model
phones can be viewed on-line at
www.fcc.gov/oet/fccid. This site uses the
phone FCC ID number A3LSGHZ650I.
Sometimes it may be necessary to remove
the battery pack to find the number. Once
you have the FCC ID number for a particular
phone, follow the instructions on the website
and it should provide values for typical or
maximum SAR for a particular phone.
Additional product specific SAR information
can also be obtained at www.fcc.gov/cgb/
sar.
Consumer Information on Wireless
Phones
What kinds of phones are the subject
of this update?
The term wireless phone refers here to
hand-held wireless phones with built-in
antennas, often called “cell,” “mobile,” or
“PCS” phones. These types of wireless
phones can expose the user to measurable
radio frequency energy (RF) because of the
short distance between the phone and the
user's head. These RF exposures are limited
by Federal Communications Commission
safety guidelines that were developed with
the advice of FDA and other federal health
and safety agencies. When the phone is
located at greater distances from the user,
the exposure to RF is drastically lower
because a person's RF exposure decreases
rapidly with increasing distance from the
source. The so-called “cordless phones,”
which have a base unit connected to the
telephone wiring in a house, typically
Do wireless phones pose a health
hazard?
The available scientific evidence does not
show that any health problems are
associated with using wireless phones. There
is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit
low levels of radio frequency energy (RF) in
the microwave range while being used. They
also emit very low levels of RF when in the
stand-by mode. Whereas high levels of RF
can produce health effects (by heating
tissue), exposure to low level RF that does
not produce heating effects causes no
known adverse health effects. Many studies
of low level RF exposures have not found
any biological effects. Some studies have
suggested that some biological effects may
occur, but such findings have not been
confirmed by additional research. In some
cases, other researchers have had difficulty
in reproducing those studies, or in
determining the reasons for inconsistent
results.
Health and safety information
The U.S. Food and Drug Administration
(FDA) has published a series of Questions
and Answers for consumers relating to radio
frequency (RF) exposure from wireless
phones. The FDA publication includes the
following information:
operate at far lower power levels, and thus
produce RF exposures well within the FCC's
compliance limits.
105
Health and safety information
What is FDA's role concerning the
safety of wireless phones?
Under the law, FDA does not review the
safety of radiation-emitting consumer
products such as wireless phones before
they can be sold, as it does with new drugs
or medical devices. However, the agency has
authority to take action if wireless phones
are shown to emit radio frequency energy
(RF) at a level that is hazardous to the user.
In such a case, FDA could require the
manufacturers of wireless phones to notify
users of the health hazard and to repair,
replace or recall the phones so that the
hazard no longer exists.
Although the existing scientific data do not
justify FDA regulatory actions, FDA has
urged the wireless phone industry to take a
number of steps, including the following:
• “Support needed research into possible
biological effects of RF of the type
emitted by wireless phones;
• “Design wireless phones in a way that
minimizes any RF exposure to the user
that is not necessary for device function;
and
106
•
“Cooperate in providing users of wireless
phones with the best possible
information on possible effects of
wireless phone use on human health.
FDA belongs to an interagency working
group of the federal agencies that have
responsibility for different aspects of RF
safety to ensure coordinated efforts at the
federal level. The following agencies belong
to this working group:
• “National Institute for Occupational
Safety and Health
• “Environmental Protection Agency
• “Federal Communications Commission
• “Occupational Safety and Health
Administration
• “National Telecommunications and
Information Administration
The National Institutes of Health participates
in some interagency working group
activities, as well.
FDA shares regulatory responsibilities for
wireless phones with the Federal
Communications Commission (FCC). All
phones that are sold in the United States
must comply with FCC safety guidelines that
limit RF exposure. FCC relies on FDA and
other health agencies for safety questions
about wireless phones.
What are the results of the research
done already?
The research done thus far has produced
conflicting results, and many studies have
suffered from flaws in their research
methods. Animal experiments investigating
the effects of radio frequency energy (RF)
exposures characteristic of wireless phones
have yielded conflicting results that often
cannot be repeated in other laboratories. A
few animal studies, however, have
suggested that low levels of RF could
accelerate the development of cancer in
laboratory animals. However, many of the
Three large epidemiology studies have been
published since December 2000. Between
them, the studies investigated any possible
association between the use of wireless
phones and primary brain cancer, glioma,
meningioma, or acoustic neuroma, tumors
of the brain or salivary gland, leukemia, or
other cancers. None of the studies
demonstrated the existence of any harmful
health effects from wireless phones RF
exposures. However, none of the studies can
answer questions about long-term
exposures, since the average period of
phone use in these studies was around three
years.
Health and safety information
FCC also regulates the base stations that the
wireless phone networks rely upon. While
these base stations operate at higher power
than do the wireless phones themselves, the
RF exposures that people get from these
base stations are typically thousands of
times lower than those they can get from
wireless phones. Base stations are thus not
the primary subject of the safety questions
discussed in this document.
studies that showed increased tumor
development used animals that had been
genetically engineered or treated with
cancer-causing chemicals so as to be predisposed to develop cancer in absence of RF
exposure. Other studies exposed the
animals to RF for up to 22 hours per day.
These conditions are not similar to the
conditions under which people use wireless
phones, so we don't know with certainty
what the results of such studies mean for
human health.
107
Health and safety information
What research is needed to decide
whether RF exposure from wireless
phones poses a health risk?
A combination of laboratory studies and
epidemiological studies of people actually
using wireless phones would provide some
of the data that are needed. Lifetime animal
exposure studies could be completed in a
few years. However, very large numbers of
animals would be needed to provide reliable
proof of a cancer promoting effect if one
exists. Epidemiological studies can provide
data that is directly applicable to human
populations, but ten or more years' followup may be needed to provide answers about
some health effects, such as cancer. This is
because the interval between the time of
exposure to a cancer-causing agent and the
time tumors develop - if they do - may be
many, many years. The interpretation of
epidemiological studies is hampered by
difficulties in measuring actual RF exposure
during day-to-day use of wireless phones.
Many factors affect this measurement, such
as the angle at which the phone is held, or
which model of phone is used.
108
What is FDA doing to find out more
about the possible health effects of
wireless phone RF?
FDA is working with the U.S. National
Toxicology Program and with groups of
investigators around the world to ensure
that high priority animal studies are
conducted to address important questions
about the effects of exposure to radio
frequency energy (RF).
FDA has been a leading participant in the
World Health Organization international
Electromagnetic Fields (EMF) Project since
its inception in 1996. An influential result of
this work has been the development of a
detailed agenda of research needs that has
driven the establishment of new research
programs around the world. The Project has
also helped develop a series of public
information documents on EMF issues.
FDA and Cellular Telecommunications &
Internet Association (CTIA) have a formal
Cooperative Research and Development
Agreement (CRADA) to do research on
wireless phone safety. FDA provides the
scientific oversight, obtaining input from
experts in government, industry, and
What steps can I take to reduce my
exposure to radio frequency energy
from my wireless phone?
If there is a risk from these products - and
at this point we do not know that there is - it
is probably very small. But if you are
concerned about avoiding even potential
risks, you can take a few simple steps to
minimize your exposure to radio frequency
energy (RF). Since time is a key factor in
how much exposure a person receives,
reducing the amount of time spent using a
wireless phone will reduce RF exposure.
• “If you must conduct extended
conversations by wireless phone every
day, you could place more distance
between your body and the source of the
RF, since the exposure level drops off
dramatically with distance. For example,
you could use a headset and carry the
wireless phone away from your body or
use a wireless phone connected to a
remote antenna.
Again, the scientific data do not demonstrate
that wireless phones are harmful. But if you
are concerned about the RF exposure from
these products, you can use measures like
those described above to reduce your RF
exposure from wireless phone use.
What about children using wireless
phones?
The scientific evidence does not show a
danger to users of wireless phones,
including children and teenagers. If you
want to take steps to lower exposure to
radio frequency energy (RF), the measures
described above would apply to children and
teenagers using wireless phones. Reducing
the time of wireless phone use and
increasing the distance between the user
and the RF source will reduce RF exposure.
Health and safety information
academic organizations. CTIA-funded
research is conducted through contracts to
independent investigators. The initial
research will include both laboratory studies
and studies of wireless phone users. The
CRADA will also include a broad assessment
of additional research needs in the context
of the latest research developments around
the world.
109
Health and safety information
Some groups sponsored by other national
governments have advised that children be
discouraged from using wireless phones at
all. For example, the government in the
United Kingdom distributed leaflets
containing such a recommendation in
December 2000. They noted that no
evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their
recommendation to limit wireless phone use
by children was strictly precautionary; it was
not based on scientific evidence that any
health hazard exists.
Do hands-free kits for wireless phones
reduce risks from exposure to RF
emissions?
Since there are no known risks from
exposure to RF emissions from wireless
phones, there is no reason to believe that
hands-free kits reduce risks. Hands-free kits
can be used with wireless phones for
convenience and comfort. These systems
reduce the absorption of RF energy in the
head because the phone, which is the source
of the RF emissions, will not be placed
110
against the head. On the other hand, if the
phone is mounted against the waist or other
part of the body during use, then that part
of the body will absorb more RF energy.
Wireless phones marketed in the U.S. are
required to meet safety requirements
regardless of whether they are used against
the head or against the body. Either
configuration should result in compliance
with the safety limit.
Do wireless phone accessories that
claim to shield the head from RF
radiation work?
Since there are no known risks from
exposure to RF emissions from wireless
phones, there is no reason to believe that
accessories that claim to shield the head
from those emissions reduce risks. Some
products that claim to shield the user from
RF absorption use special phone cases, while
others involve nothing more than a metallic
accessory attached to the phone. Studies
have shown that these products generally do
not work as advertised. Unlike “hand-free”
kits, these so-called “shields” may interfere
FDA continues to monitor the use of wireless
phones for possible interactions with other
medical devices. Should harmful
interference be found to occur, FDA will
conduct testing to assess the interference
and work to resolve the problem.
Settings
What about wireless phone
interference with medical equipment?
Radio frequency energy (RF) from wireless
phones can interact with some electronic
devices. For this reason, FDA helped develop
a detailed test method to measure
electromagnetic interference (EMI) of
implanted cardiac pacemakers and
defibrillators from wireless telephones. This
test method is now part of a standard
sponsored by the Association for the
Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by FDA,
medical device manufacturers, and many
other groups, was completed in late 2000.
This standard will allow manufacturers to
ensure that cardiac pacemakers and
defibrillators are safe from wireless phone
EMI. FDA has tested wireless phones and
helped develop a voluntary standard
sponsored by the Institute of Electrical and
Electronic Engineers (IEEE). This standard
specifies test methods and performance
requirements for hearing aids and wireless
phones so that no interference occurs when
a person uses a compatible phone and a
compatible hearing aid at the same time.
This standard was approved by the IEEE in
2000.
Health and safety information
with proper operation of the phone. The
phone may be forced to boost its power to
compensate, leading to an increase in RF
absorption. In February 2002, the Federal
trade Commission (FTC) charged two
companies that sold devices that claimed to
protect wireless phone users from radiation
with making false and unsubstantiated
claims. According to FTC, these defendants
lacked a reasonable basis to substantiate
their claim.
Additional information on the safety of RF
exposures from various sources can be
obtained from the following organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
111
Health and safety information
•
•
•
•
•
•
•
112
Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
Occupational Safety and Health
Administration's (OSHA):
http://www.osha.gov/SLTC/
radiofrequencyradiation/index.html
National institute for Occupational Safety
and Health (NIOSH):
http://www.cdc.gov/niosh/emfpg.html
World health Organization (WHO):
http://www.who.int/peh-emf/
International Commission on NonIonizing Radiation Protection:
http://www.icnirp.de
National Radiation Protection Board
(UK):
http://www.nrpb.org.uk
Updated 4/3/2002: US food and Drug
Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful
ability to communicate by voice, almost
anywhere, anytime. But an important
responsibility accompanies the benefits of
wireless phones, one that every user must
uphold.
When driving a car, driving is your first
responsibility. When using your wireless
phone behind the wheel of a car, practice
good common sense and remember the
following tips:
1. Get to know your wireless phone and its
features, such as speed dial and redial. If
available, these features help you to
place your call without taking your
attention off the road.
2. When available, use a hands-free device.
If possible, add an additional layer of
convenience and safety to your wireless
phone with one of the many hands free
accessories available today.
7. Do not engage in stressful or emotional
conversations that may be distracting.
Make people you are talking with aware
you are driving and suspend
conversations that have the potential to
divert your attention from the road.
8. Use your wireless phone to call for help.
Dial 9-1-1 or other local emergency
number in the case of fire, traffic
accident or medical emergencies.
Remember, it is a free call on your
wireless phone!
9. Use your wireless phone to help others in
emergencies. If you see an auto
accident, crime in progress or other
serious emergency where lives are in
danger, call 9-1-1 or other local
emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special nonemergency wireless assistance number
when necessary. If you see a brokendown vehicle posing no serious hazard, a
broken traffic signal, a minor traffic
accident where no one appears injured,
or a vehicle you know to be stolen, call
roadside assistance or other special nonemergency number.
113
Health and safety information
Settings
3. Position your wireless phone within easy
reach. Be able to access your wireless
phone without removing your eyes from
the road. If you get an incoming call at
an inconvenient time, let your voice mail
answer it for you.
4. Let the person you are speaking with
know you are driving; if necessary,
suspend the call in heavy traffic or
hazardous weather conditions. Rain,
sleet, snow, ice and even heavy traffic
can be hazardous.
5. Do not take notes or look up phone
numbers while driving. Jotting down a
“to do” list or flipping through your
address book takes attention away from
your primary responsibility, driving
safely.
6. Dial sensibly and assess the traffic; if
possible, place calls when you are not
moving or before pulling into traffic. Try
to plan calls when your car will be
stationary. If you need to make a call
while moving, dial only a few numbers,
check the road and your mirrors, then
continue.
Health and safety information
“The wireless industry reminds you to
use your phone safely when driving.”
Using Your Phone Near Other
Electronic Devices
For more information, please call 1-888901-SAFE, or visit our web-site www.wowcom.com
Most modern electronic equipment is
shielded from radio frequency (RF) signals.
However, certain electronic equipment may
not be shielded against the RF signals from
your wireless phone. Consult the
manufacturer to discuss alternatives.
Provided by the Cellular Telecommunications
& Internet Association
Operating Environment
Remember to follow any special regulations
in force in any area and always switch your
phone off whenever it is forbidden to use it,
or when it may cause interference or danger.
When connecting the phone or any
accessory to another device, read its user's
guide for detailed safety instructions. Do not
connect incompatible products.
As with other mobile radio transmitting
equipment, users are advised that for the
satisfactory operation of the equipment and
for the safety of personnel, it is
recommended that the equipment should
only be used in the normal operating
position (held to your ear with the antenna
pointing over your shoulder).
114
Pacemakers
Pacemaker manufacturers recommend that
a minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference
with the pacemaker.
These recommendations are consistent with
the independent research and
recommendations of Wireless Technology
Research.
Persons with pacemakers:
• should always keep the phone more than
15 cm
(6 inches) from their pacemaker when
the phone is switched on.
•
•
should not carry the phone in a breast
pocket.
should use the ear opposite the
pacemaker to minimize potential
interference.
Hearing Aids
Some digital wireless phones may interfere
with some hearing aids. In the event of such
interference, you may wish to consult your
hearing aid manufacturer to discuss
alternatives.
Potentially Explosive Environments
Switch your phone off when in any area with
a potentially explosive atmosphere and obey
all signs and instructions. Sparks in such
areas could cause an explosion or fire
resulting in bodily injury or even death.
Settings
Other Medical Devices
If you use any other personal medical
devices, consult the manufacturer of your
device to determine if it is adequately
shielded from external RF energy. Your
physician may be able to assist you in
obtaining this information. Switch your
phone off in health care facilities when any
regulations posted in these areas instruct
you to do so. Hospitals or health care
facilities may be using equipment that could
be sensitive to external RF energy.
Posted Facilities
Switch your phone off in any facility where
posted notices require you to do so.
Health and safety information
If you have any reason to suspect that
interference is taking place, switch your
phone off immediately.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in
motor vehicles. Check with the
manufacturer or its representative regarding
your vehicle. You should also consult the
manufacturer of any equipment that has
been added to your vehicle.
Users are advised to switch the phone off
while at a refueling point (service station).
Users are reminded of the need to observe
restrictions on the use of radio equipment in
fuel depots (fuel storage and distribution
areas), chemical plants or where blasting
operations are in progress.
115
Health and safety information
Areas with a potentially explosive
atmosphere are often but not always clearly
marked. They include below deck on boats,
chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such
as propane or butane), areas where the air
contains chemicals or particles, such as
grain, dust or metal powders, and any other
area where you would normally be advised
to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone,
operates using radio signals, wireless and
landline networks as well as user
programmed functions, which cannot
guarantee connection in all conditions.
Therefore, you should never rely solely on
any wireless phone for essential
communications (medical emergencies, for
example).
Remember, to make or receive any calls the
phone must be switched on and in a service
area with adequate signal strength.
Emergency calls may not be possible on all
wireless phone networks or when certain
116
network services and/or phone features are
in use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your
present location (for example, 911 or
other official emergency number).
Emergency numbers vary by location.
3. Press
If certain features are in use (call barring,
for example), you may first need to
deactivate those features before you can
make an emergency call. Consult this
document and your local cellular service
provider.
When making an emergency call, remember
to give all the necessary information as
accurately as possible. Remember that your
phone may be the only means of
communication at the scene of an accident;
do not cut off the call until given permission
to do so.
Restricting Children's access to your
Phone
Your phone is not a toy. Children should not
be allowed to play with it because they could
hurt themselves and others, damage the
phone or make calls that increase your
phone bill.
FCC Notice and Cautions
Health and safety information
Settings
FCC Notice
• This device complies with Part 15 of
the FCC Rules. Operation is subject to
the following two conditions: (1) this
device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired
operation.
• This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation.
This equipment generates, uses and can
radiate radio frequency energy and,f not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications.However, there is no
guarantee that interference will not occur in a
particular installation.If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the
interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna. Increase the separation between the
equipment and receiver.
-Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected. -Consult the dealer or
an experienced radio/TV technician for help.
The phone may cause TV or radio
interference if used in close proximity to
receiving equipment. The FCC can require
you to stop using the phone if such
interference cannot be eliminated.
117
Health and safety information
Vehicles using liquefied petroleum gas (such
as propane or butane) must comply with the
National Fire Protection Standard (NFPA-58).
For a copy of this standard, contact the
National Fire Protection Association, One
Battery march Park, Quincy, MA 02269,
Attn: Publication Sales Division.
Other Important Safety
Information
Cautions
Changes or modifications made in the radio
phone, not expressly approved by Samsung,
will void the user’s authority to operate the
equipment.
•
Only use approved batteries, antennas and
chargers. The use of any unauthorized
accessories may be dangerous and void the
phone warranty if said accessories cause
damage or a defect to the phone.
•
•
•
Although your phone is quite sturdy, it is a
complex piece of equipment and can be
broken. Avoid dropping, hitting, bending or
sitting on it.
•
118
Only qualified personnel should service
the phone or install the phone in a
vehicle. Faulty installation or service may
be dangerous and may invalidate any
warranty applicable to the device.
Check regularly that all wireless phone
equipment in your vehicle is mounted
and operating properly.
Do not store or carry flammable liquids,
gases or explosive materials in the same
compartment as the phone, its parts or
accessories.
For vehicles equipped with an air bag,
remember that an air bag inflates with
great force. Do not place objects,
including both installed or portable
wireless equipment in the area over the
air bag or in the air bag deployment
area. If wireless equipment is improperly
installed and the air bag inflates, serious
injury could result.
Switch your phone off before boarding an
aircraft. The use of wireless phone in
•
Product Performance
Getting the Most Out of Your Signal
Reception
The quality of each call you make or receive
depends on the signal strength in your area.
Your phone informs you of the current signal
strength by displaying a number of bars next
to the signal strength icon. The more bars
displayed, the stronger the signal.
If you're inside a building, being near a
window may give you better reception.
Settings
Understanding the Power Save
Feature
If your phone is unable to find a signal after
15 minutes of searching, a Power Save
feature is automatically activated. If your
phone is active, it periodically rechecks
service availability or you can check it
yourself by pressing any key.
Health and safety information
aircraft is illegal and may be dangerous
to the aircraft's operation.
Failure to observe these instructions may
lead to the suspension or denial of
telephone services to the offender, or
legal action, or both.
Anytime the Power Save feature is activated,
a message displays on the screen. When a
signal is found, your phone returns to
standby mode.
119
Health and safety information
Understanding How Your Phone
Operates
Your phone is basically a radio transmitter
and receiver. When it's turned on, it receives
and transmits radio frequency (RF) signals.
When you use your phone, the system
handling your call controls the power level.
This power can range from 0.006 watts to
0.2 watts in digital mode.
•
Maintaining Your Phone's Peak
Performance
For the best care of your phone, only
authorized personnel should service your
phone and accessories. Faulty service may
void the warranty.
Many services and features are network
dependent and may require additional
subscription and/or usage charges. Not all
features are available for purchase or use in
all areas. Downloadable Ring Tones may be
available at an additional cost. Other
conditions and restrictions may apply. See
your service provider for additional
information.
There are several simple guidelines to
operating your phone properly and
maintaining safe, satisfactory service.
• Hold the phone with the antenna raised,
fully-extended and over your shoulder.
• Try not to hold, bend or twist the phone's
antenna.
• Don't use the phone if the antenna is
damaged.
• Speak directly into the phone's receiver.
120
Avoid exposing your phone and
accessories to rain or liquid spills. If your
phone does get wet, immediately turn
the power off and remove the battery. If
it is inoperable, call Customer Care for
service.
Availability of Various Features/
Ring Tones
Battery Standby and Talk Time
Standby and talk times will vary depending
on phone usage patterns and conditions.
Battery power consumption depends on
factors such as network configuration, signal
strength, operating temperature, features
selected, frequency of calls, and voice, data,
and other application usage patterns.
Battery Precautions
•
•
•
•
•
•
Settings
•
•
the power source. Do not leave the
battery connected to a charger for more
than a week, since overcharging may
shorten its life.
Extreme temperatures will affect the
charging capacity of your battery: it may
require cooling or warming first.
Do not leave the battery in hot or cold
places, such as in a car in summer or
winter conditions, as you will reduce the
capacity and lifetime of the battery.
Always try to keep the battery at room
temperature. A phone with a hot or cold
battery may temporarily not work, even
when the battery is fully charged. Li-ion
batteries are particularly affected by
temperatures below 0 °C (32 °F).
Do not short-circuit the battery.
Accidental short- circuiting can occur
when a metallic object (coin, clip or pen)
causes a direct connection between the
+ and - terminals of the battery (metal
strips on the battery), for example when
you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may
Health and safety information
•
Never use any charger or battery that is
damaged in any way.
Use the battery only for its intended
purpose.
If you use the phone near the network's
base station, it uses less power; talk and
standby time are greatly affected by the
signal strength on the cellular network
and the parameters set by the network
operator.
Battery charging time depends on the
remaining battery charge and the type of
battery and charger used. The battery
can be charged and discharged hundreds
of times, but it will gradually wear out.
When the operation time (talk time and
standby time) is noticeably shorter than
normal, it is time to buy a new battery.
If left unused, a fully charged battery will
discharge itself over time.
Use only Samsung-approved batteries
and recharge your battery only with
Samsung-approved chargers. When a
charger is not in use, disconnect it from
121
Health and safety information
•
damage the battery or the object causing
the short-circuiting.
Dispose of used batteries in accordance
with local regulations. In some areas, the
disposal of batteries in household or
business trash may be prohibited. For
safe disposal options for Li-Ion batteries,
contact your nearest Samsung
authorized service center. Always
recycle. Do not dispose of batteries in a
fire.
•
•
•
•
Care and Maintenance
Your phone is a product of superior design
and craftsmanship and should be treated
with care. The suggestions below will help
you fulfill any warranty obligations and allow
you to enjoy this product for many years.
• Keep the phone and all its parts and
accessories out of the reach of small
children.
• Keep the phone dry. Precipitation,
humidity and liquids contain minerals
that will corrode electronic circuits.
122
•
•
Do not use the phone with a wet hand.
Doing so may cause an electric shock to
you or damage to the phone.
Do not use or store the phone in dusty,
dirty areas, as its moving parts may be
damaged.
Do not store the phone in hot areas.
High temperatures can shorten the life of
electronic devices, damage batteries,
and warp or melt certain plastics.
Do not store the phone in cold areas.
When the phone warms up to its normal
operating temperature, moisture can
form inside the phone, which may
damage the phone's electronic circuit
boards.
Do not drop, knock or shake the phone.
Rough handling can break internal circuit
boards.
Do not use harsh chemicals, cleaning
solvents or strong detergents to clean
the phone. Wipe it with a soft cloth
slightly dampened in a mild soap-andwater solution.
•
•
•
•
Use only the supplied or an approved
replacement antenna. Unauthorized
antennas or modified accessories may
damage the phone and violate
regulations governing radio devices.
If the phone, battery, charger or any
accessory is not working properly, take it
to your nearest qualified service facility.
The personnel there will assist you, and
if necessary, arrange for service.
Settings
•
Health and safety information
•
Do not paint the phone. Paint can clog
the device's moving parts and prevent
proper operation.
Do not put the phone in or on heating
devices, such as a microwave oven, a
stove or a radiator. The phone may
explode when overheated.
When the phone or battery gets wet, the
label indicating water damage inside the
phone changes color. In this case, phone
repairs are no longer guaranteed by the
manufacturer's warranty, even if the
warranty for your phone has not expired.
If your phone has a flash or light, do not
use it too close to the eyes of people or
animals. This may cause damage to their
eyes.
123
Health and safety information
124
Index
ABC mode, text input • 28
Alarm • 79
Answering
call • 30
second call • 31
Anykey answer • 96
Auto redial • 96
Background image • 96
Backlight time, set • 97
Barring, calls • 98
Battery
charging • 7
low indicator • 8
precautions • 110
Bluetooth
receiving, data • 104
sending, data • 104
settings • 102
Broadcast messages • 59, 67
Browser, web • 48
Calculator • 85
Calendar • 80
Call cost • 36
Call time • 37
Caller groups • 40
Caller ID • 97
Calls
answering • 30
barring • 98
diverting • 98
holding • 31
making • 29
redialling • 30
rejecting • 30
transferring • 32
waiting • 99
Camera
photos • 87
videos • 90
Characters, enter • 27
Configuration messages • 57, 59
Connect tone • 94
Connection settings • 100
Converter • 86
Creating messages
e-mail • 56
MMS • 53
SMS • 52
Date, set • 95
Deleting
calendar items • 82
calendar items• 82
call log • 36
e-mail • 60, 62, 78
MMS • 58, 60, 62
phonebook • 39
SMS • 58, 60, 62
Dialling display, set • 97
Display
backlight, set • 97
brightness • 96
icons • 10
language • 94
layout • 10
settings • 96
Diverting, calls • 98
Document files • 74
DRM (Digital Rights Management)
• 69
DTMF tones, send • 33, 35
E-mails
creating/sending • 56
deleting • 78
setting • 65
viewing • 78
Emergency calls • 113
125
Index
FDN (Fixed Dialling Number)
mode • 105
File viewer • 74
Folder tone • 94
Games • 73
Greeting message • 96
Health and safety • 109
Holding, call • 31
Icons, description • 10
Images, downloaded • 69
Inbox, messages
e-mail • 59
MMS/SMS • 57
International calls • 29
Internet • 48
Java applications • 73
Keypad tones
selecting • 94
volume • 93
Language, select • 94
126
Last number, redial • 30
Locking
media content • 105
phone • 104
SIM card • 104
Low battery indicator • 8
Memory card
accessing files • 77
installing • 25, 26
Memory status
downloaded items • 77
messages • 68
My files • 77
phonebook 43
Message tone • 93
Messages
broadcast • 59, 67
configuration • 59
e-mail • 56, 59
greeting • 96
MMS • 53, 58
push • 59, 67
SMS • 52, 57
SOS • 68
Minute minder • 94
MMS messages
creating/sending • 53
deleting • 58
setting • 63
viewing • 57
Multimedia
files • 69
player • 43
Multiparty-call • 32
Music player • 44
My files • 69
Name card • 41
Names
entering • 27
searching • 38
Network band, select • 100
Network selection • 99, 100
Numbers
searching • 38
storing • 39
Password
call barring • 99
phone • 105
Phone
care and maintenance • 115
display • 10
icons • 10
locking • 104
password • 105
resetting • 107
switching on/off • 8
unpacking • 6
Phonebook
adding • 39
deleting • 39
R
Received messages
e-mail • 59
MMS/SMS • 57
Recording
videos • 90
voice memos • 47
Redialling
automatically • 96
manually • 30
Resetting phone • 107
Ringer
incoming calls • 93
messages • 93
Road safety • 111
Roaming • 99
Safety
information • 109
precautions • 1
Security, calls • 104
Sent messages • 60
Shortcut • 95
Silent mode • 14
SIM card
inserting • 7
locking • 104
Slide settings • 96
SMS messages
creating/sending • 52
deleting • 58
setting • 62
viewing • 57
SOS message • 68
Sound profiles • 93
Sounds, downloaded • 72
Speakerphone • 32
Speed dial • 42
Switching on/off
key tones • 33
microphone • 32
phone • 8
Text, enter • 27
TIMClick service • 55
Time, set • 95
Video calls
answering • 34
making • 33
options • 34
Video player • 46
Videos
options • 71
playing • 71
recording • 90
Voice recorder
playing • 47
recording • 47
Voicemail server • 67
Index
finding • 38
options • 38
setting • 42
speed dialling • 42
Photos
editing • 70
options • 70
viewing • 69
PIN, change • 105
PIN2, change • 105
Postcard, send • 55
Power on/off tone • 94
Privacy • 105
Problems, solve • 107
Profiles • 93
Push messages • 59, 67
Waiting call • 99
Wallpaper • 96
Web browser
access • 48
bookmarks • 50
Whisper mode • 32
World time • 84
T9 mode, text input • 27
Templates, message • 61
127
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
XMP Toolkit                     : 3.1-701
Modify Date                     : 2006:10:06 12:21:33-04:00
Create Date                     : 2006:10:06 11:59:59-04:00
Metadata Date                   : 2006:10:06 12:21:33-04:00
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Title                           : D:\PROJECT\승인관련\SGH-Z650i\FCC\...
Creator                         : CH
Document ID                     : uuid:139b15c2-c646-4e7a-aad5-c7f938f986e0
Instance ID                     : uuid:a6500133-2028-457c-962a-21f38d5de9c9
Producer                        : Acrobat Distiller 6.0 (Windows)
Has XFA                         : No
Page Count                      : 130
Author                          : CH
EXIF Metadata provided by EXIF.tools
FCC ID Filing: A3LSGHZ650I

Navigation menu