Samsung Electronics Co SIP005AFS30 ARTIK-0530 User Manual ARTIK 5 Datasheet
Samsung Electronics Co Ltd ARTIK-0530 ARTIK 5 Datasheet
Contents
- 1. User Manual_20160929_v1 - 06_ARTIK530DevBoardUserGuide_Draft_0928
- 2. User Manual_20161006_v2 - 06_SIP007AFS00_manual_final
- 3. User Manual addendum for Full Modular Approval
User Manual_20160929_v1 - 06_ARTIK530DevBoardUserGuide_Draft_0928
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3160976 |
| Application ID | vjhumgLsv9PR6TZ75Cayeg== |
| Document Description | User Manual_20160929_v1 - 06_ARTIK530DevBoardUserGuide_Draft_0928 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 211.4kB (2642439 bits) |
| Date Submitted | 2016-10-12 00:00:00 |
| Date Available | 2017-04-10 00:00:00 |
| Creation Date | 2016-09-28 13:00:31 |
| Producing Software | Microsoft® Word 2010 |
| Document Lastmod | 2016-09-28 13:00:31 |
| Document Title | ARTIK 5 Datasheet |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | Chrissanthis, Peter |
SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND SPECIFICATIONS WITHOUT NOTICE. Products and specifications discussed herein are for reference purposes only. All information discussed herein is provided on an "AS IS" b asis, without warranties of any kind. This document and all information discussed herein remain the sole and exclusive property of Samsung Electronics. No license of any patent, copyright, mask work, trademark or any other intellectual property right is granted by one party to the other party under this document, by implication, estoppel or other-wise. Samsung products are not intended for use in life support, critical care, medical, safety equipment, or similar applications where product failure could result in loss of life or personal or physical harm, or any military or defense application, or any governmental procurement to which special terms or provisions may apply. For updates or additional information about Samsung products, contact your nearest Samsung office. All brand names, trademarks and registered trademarks belong to their respective owners. Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide TABLE OF CONTENTS Table of Contents ................................................................................................................................................................... 2 List of Figures .......................................................................................................................................................................... 3 List of Tables ........................................................................................................................................................................... 3 Version History ...................................................................................................................................................................................... 4 Handling Guide ....................................................................................................................................................................... 5 ARTIK 530 Development Board Overview........................................................................................................................... 6 features .................................................................................................................................................................................................. 6 Block diagram ....................................................................................................................................................................................... 7 Mechanical Drawings ........................................................................................................................................................................... 7 ARTIK 530 Module ................................................................................................................................................................ 10 ARTIK 530 Module Specification ........................................................................................................................................................ 10 ARTIK 530 Development Board Interposer Board ........................................................................................................... 11 Interposer Board Boot mode Configuration .................................................................................................................................... 12 USB OTG............................................................................................................................................................................................... 13 HDMI 1.4a ............................................................................................................................................................................................ 13 LVDS ..................................................................................................................................................................................................... 14 Ethernet................................................................................................................................................................................................ 14 Antenna ................................................................................................................................................................................................ 15 ARTIK 530 Development Board Platform Board .............................................................................................................. 16 Configuration of External Power Source .......................................................................................................................................... 17 SD-Card Interface................................................................................................................................................................................ 17 EarJack Interface ................................................................................................................................................................................. 18 MIPI DSI/CSI Interface ......................................................................................................................................................................... 18 USB Host 2.0 Interface ....................................................................................................................................................................... 19 Connector to IF Board Interface ........................................................................................................................................................ 20 ARTIK 530 Development Board IF Board .......................................................................................................................... 21 Preview on the ARTIK IF board .......................................................................................................................................................... 21 Configuration of external Power Source .......................................................................................................................................... 22 ARTIK 530 Development Board Booting ........................................................................................................................... 23 Serial Port Connection ....................................................................................................................................................................... 23 Terminal Emulator Installation ......................................................................................................................................................... 24 Power on the ARTIK 530 Development Board.................................................................................................................................. 25 Network Settings ................................................................................................................ 오류! 책갈피가 정의되어 있지 않습니다. How to use sftp .................................................................................................................. 오류! 책갈피가 정의되어 있지 않습니다. How to use ssh ................................................................................................................... 오류! 책갈피가 정의되어 있지 않습니다. Package installation .......................................................................................................... 오류! 책갈피가 정의되어 있지 않습니다. Legal Information ................................................................................................................................................................. 27 Samsung Confidential Specifications in this document are tentative and subject to change. Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide LIST OF FIGURES Figure 1. Preview of the ARTIK 530 Board ............................................................................................................................6 Figure 2. ARTIK 530 Development Board ..............................................................................................................................7 Figure 3. Mechanical Drawing ARTIK 530 Development Board Interposer Board all dimensions are in [mm] ..........8 Figure 4. Mechanical Drawing ARTIK 530 Development Board Platform Board all dimensions are in [mm] .............9 Figure 5. ARTIK 530 Development Board Interposer Board Left Top Side, Right Bottom Side .................................. 11 Figure 6. ARTIK 530 Development Board Booting Switch Location ................................................................................ 12 Figure 7. USB OTG Interface location on the Interposer Board ...................................................................................... 13 Figure 8. HDMI 1.4a Interface location on the Interposer Board ................................................................................... 13 Figure 9. LVDS Interface location on the Interposer Board ............................................................................................. 14 Figure 10. Ethernet Interface location on the Interposer Board .................................................................................... 14 Figure 11. Antenna location on the Interposer Board ..................................................................................................... 15 Figure 12. ARTIK 530 Development Board Platform Board Left Bottom Side, Right Top Side ................................... 16 Figure 13. Jumper Interface locations JP1-JP4 on the Platform Board ........................................................................... 17 Figure 14. SD-Card Interface location on the Platform Board ........................................................................................ 17 Figure 15. Ear Jack Interface location on the Platform Board ......................................................................................... 18 Figure 16. MIPI DSI Interface location on the Platform Board ........................................................................................ 18 Figure 17. MIPI CSI Interface Location on the Platform Board ....................................................................................... 19 Figure 18 USB2.0 Interface location on the Platform Board ........................................................................................... 19 Figure 19. Expansion Connector Interface location on the Platform Board ................................................................. 20 Figure 20. ARTIK 530 Development Board IF Board ......................................................................................................... 21 Figure 21. Jumper Interface locations J20, J21 on the IF Board ....................................................................................... 22 Figure 22. Typical Linux Serial Console .............................................................................................................................. 23 Figure 23. USB Serial Cable hooked up to the Platform Board ....................................................................................... 24 Figure 24 Connection Power adaptor with development Board .................................................................................... 25 Figure 25. Power switch location on the development Board ........................................................................................ 25 Figure 26. Power button location on the development Board ....................................................................................... 26 LIST OF TABLES Table 1. Main Features of the ARTIK 530 Module ............................................................................................................. 10 Table 2. Boot option that can be set on the Interposer Board ....................................................................................... 12 Table 3 Antenna spec ........................................................................................................................................................... 15 Table 4. Connector J2 ............................................................................................................................................................ 21 Table 5. Connector J3 ............................................................................................................................................................ 22 Samsung Confidential Specifications in this document are tentative and subject to change. Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide VERSION HISTORY Revision Date Samsung Confidential Description Maturity Specifications in this document are tentative and subject to change. Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide HANDLING GUIDE Precaution against Electrostatic Discharge When using the ARTIK 530 Board, ensure that the environment is protected against static electricity: Contamination Do not use the ARTIK 530 Board in an environment exposed to dust or dirt adhesion. Temperature/Humidity The ARTIK 530 Board is sensitive to: 1. 2. 3. Environment Temperature Humidity High temperature or humidity deteriorates the characteristics of ARTIK 530 Board, therefore, do not store or use the ARTIK 530 Board under such conditions. Mechanical Shock Do not to apply excessive mechanical shock or force on the ARTIK 530 Board. Chemical Do not expose the ARTIK 530 Board to chemicals. Exposure to chemicals leads to reactions that deteriorate the characteristics of the ARTIK 530 Board. EMS (Electro Magnetic Susceptibility) Strong electromagnetic waves or magnetic fields may affect the characteristics of the ARTIK 530 Board during the operation under insufficient PCB circuit design for Electro Magnetic Susceptibility (EMS). Samsung Confidential Specifications in this document are tentative and subject to change. Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide ARTIK 530 DEVELOPMENT BOARD OVERVIEW FEATURES The ARTIK 530 Development Board consists of 1x Interposer Board , 1x Platform Board, and 1x IF Board. The Interposer Board does include the ARTIK 530 Module. The ARTIK 530 Development Board is an affordable approach for developing an IoT solution. Figure 1 show the locations of the various boards that make up the ARTIK 530 Development Board. Figure 1. Preview of the ARTIK 530 Board Samsung Confidential Specifications in this document are tentative and subject to change. Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide BLOCK DIAGRAM Figure 2 shows the block diagram of the ARTIK 530 Development Board, if you want more information on the ARTIK 530 Module please consult the ARTIK 530 Module Datasheet. Figure 2. ARTIK 530 Development Board MECHANICAL DRAWINGS Figure 3 and Figure 4 show the ARTIK 530 Development Board Interposer Board and the Platform Board respectively. Samsung Confidential Specifications in this document are tentative and subject to change. Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide Figure 3. Mechanical Drawing ARTIK 530 Development Board Interposer Board all dimensions are in [mm] Samsung Confidential Specifications in this document are tentative and subject to change. Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide Figure 4. Mechanical Drawing ARTIK 530 Development Board Platform Board all dimensions are in [mm] Samsung Confidential Specifications in this document are tentative and subject to change. Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide ARTIK 530 MODULE The ARTIK 530 Development Board contains the ARTIK 530 Module. This section will describe some of the main features of this module. For more information on the ARTIK 530 Module please consult the ARTIK 530 Module datasheet. ARTIK 530 MODULE SPECIFICATION The ARTIK 530 Module is designed for IoT devices and it contains a lot of functions based on a Linux system. Not only multimedia functions but also network functions for example Wi-Fi or ZigBee. In addition the ARTIK 530 Module has mass storage functionality and its own security solution. Table 1 shows the main features of the ARTIK 530 Module that is part of the ARTIK 530 Development Board. Table 1. Main Features of the ARTIK 530 Module Processor CPU GPU 4x ARM® Cortex-A9@1.2GHz 3D graphics accelerator Media Camera I/F Display Audio 4-Lane MIPI CSI 4-Lane MIPI DSI up to FHD@24bpp I2S audio interface Memory DRAM FLASH 512MB DDR3 @ 800MHz 4GB eMMC Security Secure Element Trusted Execution Environment Secure point to point authentication and data transfer Trustware Radio WLAN Bluetooth 802.15.4 IEEE 802.11a/b/g/n 4.2+LE ZigBee + Thread Power Management PMIC Provides all power of the ARTIK 530 Module using on board bucks and LDOs Interfaces Analog and Digital I/O Samsung Confidential GPIO, I2C, SPI, UART, SDIO, USB 2.0, JTAG, Analog Input Specifications in this document are tentative and subject to change. 10 Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide ARTIK 530 DEVELOPMENT BOARD INTERPOSER BOARD The Interposer Board as depicted in Figure 5 highlights the most important components on the Interposer board. Figure 5. ARTIK 530 Development Board Interposer Board Left Top Side, Right Bottom Side Samsung Confidential Specifications in this document are tentative and subject to change. 11 Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide INTERPOSER BOARD BOOT MODE CONFIGURATION This section describes the various boot modes that are supported on the ARTIK 530 Development Board. Table 2 and Figure 6 show how to manipulate SW4 and where SW4 is located on the Interposer Board to set the various booting options that are available on the ARTIK 530 Development Board. Table 2. Boot option that can be set on the Interposer Board SW4 eMMc st 1 Boot SD Card st 1 Boot USB st 1 Boot AP_GPB13_SD0_BOOT Off Off On AP_GPB15_SD1_BOOT Off Off On AP_GPB4_VID1_3_BOOT Off On Figure 6. ARTIK 530 Development Board Booting Switch Location Samsung Confidential Specifications in this document are tentative and subject to change. 12 Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide USB OTG The Interposer board has 1x USB OTG connector located as can be seen in Figure 7. Figure 7. USB OTG Interface location on the Interposer Board HDMI 1.4A The Interposer board has 1x HDMI 1.4a connector (Micro D-Type) located as can be seen in Figure 8. The following video formats are supported: 1. 2. 3. 480p/480i @59.94Hz/60Hz, 576p/576i@50Hz 720p/720i @50Hz/59.94Hz/60Hz 1080p/1080i @50Hz/59.94Hz/60Hz Figure 8. HDMI 1.4a Interface location on the Interposer Board Samsung Confidential Specifications in this document are tentative and subject to change. 13 Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide LVDS The Interposer board has 1x LVDS Interface containing 5x data channels and 1x clock channel, its location can be seen in Figure 9. The available maximum resolution is 1920x1080@60fps. Figure 9. LVDS Interface location on the Interposer Board ETHERNET The Interposer board has 1x Ethernet Interface, its location can be seen in Figure 10. The Ethernet Interface is based on 802.3az-2010 complying to the Energy Efficient Ethernet (EEE) standard. The maximum theoretical speed of the interface is 1000Mbps. Figure 10. Ethernet Interface location on the Interposer Board Samsung Confidential Specifications in this document are tentative and subject to change. 14 Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide ANTENNA Antenna which is enclosed in KIT has to be assembled on Interposer board if use Wifi/BT and Zigbee. Antena spec can be seen in Table 3 Table 3 Antenna spec Antenna type Dipole Antenna Antenna peak gain +1.43(2.4GHz)/ +0.91(5GHz) Frequency 2.4GHz, 5GHz (for Wi-Fi, BT, ZigBee) Connector type SMA-M ANT.Size 108.7mm Figure 11. Antenna location on the Interposer Board Samsung Confidential Specifications in this document are tentative and subject to change. 15 Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide ARTIK 530 DEVELOPMENT BOARD PLATFORM BOARD The Platform Board as depicted in Figure 12 highlights the most important components on the Interposer board. Figure 12. ARTIK 530 Development Board Platform Board Left Bottom Side, Right Top Side Samsung Confidential Specifications in this document are tentative and subject to change. 16 Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide CONFIGURATION OF EXTERNAL POWER SOURCE Through selection of the Jumpers JP1-JP4 the IO power source can be selected to either DC-5V or to Charger Output. Figure 13 shows how to set the various jumpers to switch between power sources. Figure 13. Jumper Interface locations JP1-JP4 on the Platform Board SD-CARD INTERFACE The Platform board has 1x SD-CARD interface supporting SD3.0 located as can be seen in Figure 14. Figure 14. SD-Card Interface location on the Platform Board Samsung Confidential Specifications in this document are tentative and subject to change. 17 Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide EARJACK INTERFACE The Platform board has 1x 4 pin ear jack interface supporting stereo audio as can be seen in Figure 15. Figure 15. Ear Jack Interface location on the Platform Board MIPI DSI/CSI INTERFACE The Platform board has 1x MIPI DSI and 1x MIPI CSI interface. The location of the DSI Display interface can be seen in Figure 16. The location of the MIPI CSI interface can be seen in Figure 17.The MIPI DSI interface can operate at a maximum resolution of WUXGA (1920x1200), whereas the MIPI CSI interface can have a static resolution of 5M pixels or a dynamic resolution for video capturing of 1080P. Figure 16. MIPI DSI Interface location on the Platform Board Samsung Confidential Specifications in this document are tentative and subject to change. 18 Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide Figure 17. MIPI CSI Interface Location on the Platform Board USB HOST 2.0 INTERFACE The Platform board has 1x USB 2.0 Interface. The location of the USB 2.0 interface can be seen in . Figure 18 USB2.0 Interface location on the Platform Board Samsung Confidential Specifications in this document are tentative and subject to change. 19 Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide CONNECTOR TO IF BOARD INTERFACE The Platform board has 1x expansion connector that can be seen in Figure 19. This connector enables expansion Figure 19. Expansion Connector Interface location on the Platform Board Samsung Confidential Specifications in this document are tentative and subject to change. 20 Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide ARTIK 530 DEVELOPMENT BOARD IF BOARD PREVIEW ON THE ARTIK IF BOARD Figure 20 shows the highlights of the connector IF board. In addition Table 4 with J2 and Table 5 with J3 show the pinout of the connectors with its meaning. Figure 20. ARTIK 530 Development Board IF Board Table 4. Connector J2 Pin Name Pin Number Pin Number XADC1 Pin Name GND XADC2 ADD_XGPIO0 XADC3 ADD_XGPIO1 XADC4 ADD_XGPIO2 XADC5 10 ADD_XGPIO3 GND 11 12 ADD_XGPIO4 ADD_XI2C0_SCL 13 14 ADD_XGPIO5 ADD_XI2C0_SDA 15 16 ADD_XGPIO6 GND 17 18 ADD_XGPIO7 ADD_XSPI0_CS 19 20 ADD_XGPIO8 ADD_XSPI0_CLK 21 22 ADD_XGPIO9 ADD_XSPI0_MISO 23 24 GND ADD_XSPI0_MOSI 25 26 ADD_XAGPIO0 GND 27 28 GND ADD_XPWM0_OUT NC 29 30 MICOM_GPIO1 31 32 GND GND 33 34 ADD_XUART0_RX NC 35 36 ADD_XUART0_TX NC 37 38 GND GND 39 40 XADC0 Samsung Confidential Specifications in this document are tentative and subject to change. 21 Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide Table 5. Connector J3 Pin Name Pin Number Pin Number Pin Name GND MICOM_GPIO1 GND MICOM_GPIO2 GND MICOM_GPIO3 GND MICOM_GPIO4 10 MICOM_GPIO5 11 12 MICOM_GPIO6 13 14 MICOM_GPIO7 15 16 MICOM_GPIO8 17 18 MICOM_GPIO9 19 20 MICOM_GPIO10 21 22 MICOM_GPIO11 23 24 MICOM_GPIO12 25 26 MICOM_GPIO13 27 28 MICOM_GPIO14 29 30 GND 31 32 GND 33 34 GND 35 36 GND 37 38 GND 39 40 GND DC5V VBAT_MAIN AP_VDDIO VDD_EXT1P8_ALIVE VDD_EXT1P8 VDD_EXT3P3_ALIVE VDD_EXT3P3 VDD_EXT5P0_1 CONFIGURATION OF EXTERNAL POWER SOURCE Through selection of the Jumpers J20 and J21 you can choose the IO power source (I C, UART GPIO) or the XGPIO power source of either, 1.8V, 3.3V or 5V. Figure 21 shows how to set the various jumpers to switch between power sources. Figure 21. Jumper Interface locations J20, J21 on the IF Board Samsung Confidential Specifications in this document are tentative and subject to change. 22 Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide ARTIK 530 DEVELOPMENT BOARD BOOTING This section will describe how to setup a connection with the ARTIK 530 Module using the Serial Port Connection and a variety of tools. SERIAL PORT CONNECTION You can use a typical Linux serial console as depicted in Figure 22, using the serial connector. If your PC does not have a serial port use the USB serial cable instead. To use the serial USB cable you need to install the device driver that is associated with your particular USB serial cable. Figure 23 depicts the USB serial cable and where it is hooked up to the Platform Board. Figure 22. Typical Linux Serial Console Samsung Confidential Specifications in this document are tentative and subject to change. 23 Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide Figure 23. USB Serial Cable hooked up to the Platform Board TERMINAL EMULATOR INSTALLATION Setting up a connection with the ARTIK 530 Module can be done in a variety of ways. Here we choose to install PuTTY a free serial console. The software can be downloaded from http://www.putty.org/. Once downloaded go through the following steps: 1. 2. Open the device manager on the control panel. Check the COM port number on your PC when you connect the USB serial cable. In our case the COM port allocated is COM13. 3. Set the PuTTY configuration as follows: a. Set the “Serial line” as the COM port number found in step 2. b. Set the COM speed to "115200". c. Set the connection type to "Serial". d. Save the session under ARTIK-Pro. Select your saved session and click the “Open” button. 4. Samsung Confidential Specifications in this document are tentative and subject to change. 24 Samsung Semiconductor, Inc. 5. 6. 7. ARTIK 530 Development Board User Guide Power on the ARTIK 530 Development Board and hold the power button for about 1 second. You should see booting messages from the ARTIK 530 Module Once booting is completed you can exercise the ARTIK 530 Module using Fedora Linux commands. POWER ON THE ARTIK 530 DEVELOPMENT BOARD go through the following steps: 1. Connect Power adapter and Platform board as depicted in Figure 24 Figure 24 Connection Power adaptor with development Board 2. Turn on Power switch . Figure 25. Power switch location on the development Board 3. Hold the power button for about 1 second. Samsung Confidential Specifications in this document are tentative and subject to change. 25 Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide Figure 26. Power button location on the development Board Samsung Confidential Specifications in this document are tentative and subject to change. 26 Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide LEGAL INFORMATION INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH THE SAMSUNG ARTIK™ DEVELOPMENT BOARD AND ALL RELATED PRODUCTS, UPDATES, AND DOCUMENTATION (HEREINAFTER “SAMSUNG PRODUCTS”). NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. THE LICENSE AND OTHER TERMS AND CONDITIONS RELATED TO YOUR USE OF THE SAMSUNG PRODUCTS ARE GOVERNED EXCLUSIVELY BY THE SAMSUNG ARTIK™ DEVELOPER LICENSE AGREEMENT THAT YOU AGREED TO WHEN YOU REGISTERED AS A DEVELOPER TO RECEIVE THE SAMSUNG PRODUCTS. EXCEPT AS PROVIDED IN THE SAMSUNG ARTIK™ DEVELOPER LICENSE AGREEMENT, SAMSUNG ELECTRONICS CO., LTD. AND ITS AFFILIATES (COLLECTIVELY, “SAMSUNG”) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION CONSEQUENTIAL OR INCIDENTAL DAMAGES, AND SAMSUNG DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, ARISING OUT OF OR RELATED TO YOUR SALE, APPLICATION AND/OR USE OF SAMSUNG PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATED TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY RIGHT. SAMSUNG RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION, DOCUMENTATION AND SPECIFICATIONS WITHOUT NOTICE. THIS INCLUDES MAKING CHANGES TO THIS DOCUMENTATION AT ANY TIME WITHOUT PRIOR NOTICE. THIS DOCUMENTATION IS PROVIDED FOR REFERENCE PURPOSES ONLY, AND ALL INFORMATION DISCUSSED HEREIN IS PROVIDED ON AN “AS IS” BASIS, WITHOUT WARRANTIES OF ANY KIND. SAMSUNG ASSUMES NO RESPONSIBILITY FOR POSSIBLE ERRORS OR OMISSIONS, OR FOR ANY CONSEQUENCES FROM THE USE OF THE DOCUMENTATION CONTAINED HEREIN. Samsung Products are not intended for use in medical, life support, critical care, safety equipment, or similar applications where product failure could result in loss of life or personal or physical harm, or any military or defense application, or any governmental procurement to which special terms or provisions may apply. This document and all information discussed herein remain the sole and exclusive property of Samsung. All brand names, trademarks and registered trademarks belong to their respective owners. For updates or additional information about Samsung ARTIK™, contact the Samsung ARTIK™ team via the Samsung ARTIK™ website at www.artik.io. Copyright © 2016 Samsung Electronics Co., Ltd. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electric or mechanical, by photocopying, recording, or otherwise, without the prior written consent of Samsung Electronics. Samsung Confidential Specifications in this document are tentative and subject to change. 27
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 27 Language : ko-KR Tagged PDF : Yes Title : ARTIK 5 Datasheet Author : Chrissanthis, Peter Creator : Microsoft® Word 2010 Create Date : 2016:09:28 13:00:31+09:00 Modify Date : 2016:09:28 13:00:31+09:00 Producer : Microsoft® Word 2010EXIF Metadata provided by EXIF.tools