Samsung Electronics Co SLS-BU103 Verizon 4G LTE Network Extender User Manual Con 732 QSG draft 20150520

Download:
Mirror Download [FCC.gov]
Document ID	2643229
Application ID	4iEr4iVhwLqhW92acem+Ww==
Document Description	User Manual QSG
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	40.49kB (506136 bits)
Date Submitted	2015-06-10 00:00:00
Date Available	2015-12-07 00:00:00
Creation Date	2017-09-29 15:11:07
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-09-29 15:11:07
Document Title	Con-732_QSG_draft_20150520.pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	IreneChung

ii—ZD (as
Confirming rFemto Operation Trouble Shooting
The iollowing Status LED seouence will occur, Upon successful setup, the LED wlll solid blue. What if my cps OLED is still no service state after one hour?
Note: If the LED tails to turn blue after one hour or is blinking a series of blur oulses, consult the troubleshooting section lithe GPS is still no service stats, you need to relocate the GPS antenna to receive stronger signal. ver' n
in the online 46 LTE Network Extender ior rEemto User Guide. See " External GPS Antenna" in the User Guide. &
How do l know my phone i. eonneetingthrough the rrernta?
_——— «vent nnene re eenneetea wrtn rrennte, tne nunnnet er ennneeten use ie arenieyea in otto.
. Solid Blue: The Device is turned on
Optional aecnssoriu
Blinking Blue: The device has an error and Is not ~ A wall bracket mount is available to allow lot the unit to be conveniently mounted on the wall. V ' W' I
Penn 0 0 meme teen tneeennennieennenn erlzon lre ess
For More Inlormafion
@ . EEEZEZMR is "m °°""°md m m! , Referto the rEernto User Manual at Verizon website. 46 LTE fo r rFe mtO
Caii customer care toll free at 5009220204
a Number of Number of connected U8. The number is e e
Connected UEs betweeno~s QuICk Start Gu'de
cps slams with number oi satellites being
tracked. The number clauses from no 9.
om) 6’5 5mm During operation with GPS in cps only mode,
when femto loses GPS signal, it shows error
message 'GPS Failure/See User Guide". D R A F T
,, . e h 46 lJE Network Extender Message
I Messages Document ID (T BD)
" Addinlional Message
" ‘" ' " EP96-04526A
SL$BU103 Version VSR 1.2
l —:|:l @
Product Contents Prerequisites Connecting the cables GPS, Ethernet, and Power
Ethernet and Backhaul (B/H) Requirements 1. Gently remove protective covers for Power, Ethernet, and GPS antenna.
ermra GPS Antenna Ethernet Cable PawerAdapter 056 PSW For optimum performance regarding oackhaul bandwidth requirements and specific firewall settings, please refer to the 2. connect the GPS antenna cable (indoor use only) to the ops part ofthe Network Extender.
Cable online 46 LTE Network Extenderror rEemto User Guide found at
http://www.verimnwireleu.com/NetwarkExlender. (Need to confirm URLl
Note:
The GPS antenna must stay connected to
the Network Extender at all times (or
operation. The inltial GPS fix can take
up to 50 minutes.
cps signal
The Network Extender requires a strong Gps signal from the provided indoor Gps antenna. For installation other than
with the provided GPS antenna, please refer to the online 46 LTE Network Extender (or rFernta User Guide.
IG‘e
C . O . Placement
onneCtlon VerV'ew The Network Extender can he installed vertically, horizontally, on a wall, or ceiling.
@ GPS amen“ Place the unit at least 10 feet away from products that generate electromagnetic radiation (5.5L, microwave oven). ®
(Confirm With Verizon Legal) 3. Attach an Ethernet cable from your router or modern LAN port to the Network Extender E/H port for network
Pgwer “a“ b‘m“ 1. identify a location for the Network Extender, central to users, but no more than 21 feet from an exterior window or connectivity.
indicator wall to allow for a strong GPS signal. 4. Plug in the power Supply and insert the power table into the Network Extender's pwp port.
2. identify a power source for the Network Extender Automatit startop and hardware initialization will begin.
”5 "m" 3. Follow device mounting, installation and power up steps. PM" “In",
POWER ON
At startup, the Network Extender will
conduct selfrconfiguratl'on. This will
take between 30 . 50 minutes the first
time the Network Extender turns on.
WAN port
Home 5w
DLED dlsplly 4. For more detailed placement instructions, please see 46 Network Extender installation Manual,
0 KW
11v DC power input

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : IreneChung
Create Date                     : 2015:06:01 15:03:59+08:00
Modify Date                     : 2015:06:09 14:21:10+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2015:06:09 14:21:10+08:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Format                          : application/pdf
Title                           : Con-732_QSG_draft_20150520.pdf
Creator                         : IreneChung
Document ID                     : uuid:e9f209ef-4c50-4eae-a979-7e23d8ab97c0
Instance ID                     : uuid:2c3ccc93-f95b-4e37-8d07-9e8ad0be9150
Page Count                      : 2

EXIF Metadata provided by EXIF.tools