Samsung Electronics Co SMG930F Multi-Band GSM/EDGE/WCDMA/LTE Phone with Bluetooth, WLAN, ANT+, and RFID User Manual HAC Addendum
Samsung Electronics Co Ltd Multi-Band GSM/EDGE/WCDMA/LTE Phone with Bluetooth, WLAN, ANT+, and RFID Users Manual HAC Addendum
Contents
- 1. Users Manual
- 2. Users Manual - HAC Addendum
Users Manual - HAC Addendum
DRAFT FCC Hearing Aid Compatibility (HAC) Regulations for Wireless Devices The U.S. Federal Communications Commission (FCC) has established requirements for digital wireless mobile devices to be compatible with hearing aids and other assistive hearing devices. When individuals employing some assistive hearing devices (hearing aids and cochlear implants) use wireless mobile devices, they may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and mobile devices also vary in the amount of interference they generate. ot Fi na The wireless telephone industry has developed a rating system for wireless mobile devices to assist hearing device users find mobile devices that may be compatible with their hearing devices. Not all mobile devices have been rated. Mobile devices that are rated have the rating on their box or a label located on the box. AF T, The ratings are not guarantees. Results will vary depending on the user's hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated mobile device successfully. Trying out the mobile device with your hearing device is the best way to evaluate it for your personal needs. M-Ratings: Wireless mobile devices rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than mobile devices that are not labeled. M4 is the better/higher of the two ratings. M-ratings refer to enabling acoustic coupling with hearing aids that do not operate in telecoil mode. DRAFT ot Fi na T-Ratings: Mobile devices rated T3 or T4 meet FCC requirements and are likely to generate less interference to hearing devices than mobile devices that are not labeled. T4 is the better/higher of the two ratings. T-ratings refer to enabling inductive coupling with hearing aids operating in telecoil mode. Hearing devices may also be rated. Your hearing aid manufacturer or hearing health professional may help you find this rating. Higher ratings mean that the hearing device is relatively immune to interference noise. Under the current industry standard, American National Standards Institute (ANSI) C63.19, the hearing aid and wireless mobile device rating values are added together to indicate how usable they are together. For example, if a hearing aid meets the M2 level rating and the wireless mobile device meets the M3 level rating, the sum of the two values equals M5. AF T, Under the standard, this should provide the hearing aid user with normal use while using the hearing aid with the particular wireless mobile device. A sum of 6 or more would indicate excellent performance. However, these are not guarantees that all users will be satisfied. T ratings work similarly. M3 The HAC rating and measurement procedure are described in the American National Standards Institute (ANSI) C63.19 standard. DRAFT HAC for Newer Technologies This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. AF T, ot Fi na It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Create Date : 2016:02:25 20:01:25-05:00 Creator : Adobe InDesign CS5.5 (7.5.3) Modify Date : 2016:02:26 12:09:48-05:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2016:02:26 12:09:48-05:00 Creator Tool : Adobe InDesign CS5.5 (7.5.3) Format : application/pdf Document ID : uuid:2ba650f3-4977-fc44-9d0d-2c0c3cf5bf80 Instance ID : uuid:7fecea2b-10e9-43f1-8af1-e58e8760bde4 Producer : Adobe PDF Library 9.9 Page Count : 3EXIF Metadata provided by EXIF.tools