Samsung Electronics Co SMP901 Multi-Band GSM/ EDGE/ WCDMA Tablet with WLAN, Bluetooth and ANT+ User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2115798
Application ID	VYmhmUB3OVDxGPB1DGY0QA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	38.33kB (479090 bits)
Date Submitted	2013-11-11 00:00:00
Date Available	2014-05-10 00:00:00
Creation Date	2017-10-25 04:42:08
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-25 04:42:08
Document Title	Microsoft Word - _A3LSMP901_User manual-FCC_Draft6.1_final_131023.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	C0CCC7FDBCF7

Draft 6.1
2013-10-23
Only for Approval
User manual
SM-P901
using this manual
This user manual has been specially designed to guide you through the functions
and features of your mobile device. To get started quickly, refer to “introducing
your mobile device,
Instructional icons
Before you start, familiarise yourself with the icons you will see in this manual:
Warning—situations that could cause injury to yourself or others
Caution—situations that could cause damage to your device or other
equipment
Note—notes, usage tips, or additional information
Refer to—pages with related information; for example:
p. 12
(represents “see page 12”)
Õ
Followed by—the order of options or menus you must select to perform a
step; for example: In Menu mode, select Messages Õ Create new message
(represents Messages, followed by Create new message)
[ ]
Square brackets—phone keys; for example: [
](represents the Power/
Menu exit key)
< >
Angled brackets—softkeys that control different functions at each screen; for
example:  (represents the OK softkey)
Copyright information
Rights to all technologies and products that comprise this device are the property of
their respective owners:
 Bluetooth® is a registered trademark of the Bluetooth SIG, Inc. worldwide
 Java™ is a trademark of Sun Microsystems, Inc.
 Windows Media Player® is a registered trademark of Microsoft Corporation.
contents
safety and usage information
Safety warnings
Safety precautions
Important usage information
introducing your mobile device
Unpack ..
Device layout Keys
Display
Icons
assembling and preparing your mobile device
Install the SIM card and battery
Charge the battery
using basic functions
Turn your device on and
off Access menus
Customise your device
Use basic call functions
Send and view messages
Add and find contacts
troubleshooting
safety and usage
information
Comply with the following precautions to avoid dangerous or illegal situations and
ensure peak performance of your mobile device.
Safety warnings
Keep your device away from small children and pets
Keep your device and all accessories out of the reach of small children or
animals. Small parts may cause choking or serious injury if swallowed.
Protect your hearing
Excessive exposure to sound at high volumes can cause hearing damage. Always turn
the volume down before plugging the earphones into an audio source and use only the minimum
volume setting necessary to hear your conversation or music.
Install mobile device and equipment with caution
Ensure that any mobile phones or related equipment installed in your vehicle are
securely mounted. Avoid placing your device and accessories near or in an air
bag deployment area. Improperly installed wireless equipment can cause serious
injury when air bags inflate rapidly.
Handle and dispose of batteries and chargers with care
 Use only Samsung-approved batteries and chargers specifically designed for
your device. Incompatible batteries and chargers can cause serious injuries
or damage to your device.
 Never dispose of batteries or phones in a fire. Follow all local regulations
when disposing used batteries or phones.
 Never place batteries or phones on or in heating devices, such as microwave
ovens, stoves, or radiators. Batteries may explode when overheated.
 Never crush or puncture the battery. Avoid exposing the battery to high
external pressure, which can lead to an internal short circuit and overheating.
Avoid interference with pacemakers
Maintain a minimum of 15 cm (6 inches) between mobile phones and pacemakers to
avoid potential interference, as recommended by manufacturers and the
independent research group, Wireless Technology Research. If you have any reason
to suspect that your device is interfering with a pacemaker or other medical device,
turn off the device immediately and contact the manufacturer of the pacemaker or
medical device for guidance.
Turn off the device in potentially explosive environments
Do not use your device at refuelling points (service stations) or near fuels or
chemicals. Turn off your device whenever directed by warning signs or instructions.
Your device could cause explosions or fire in and around fuel or chemical storage
and transfer areas or blasting areas. Do not store or carry flammable liquids, gases,
or explosive materials in the same compartment as the device, its parts, or
accessories.
Reduce the risk of repetitive motion injuries
When sending text messages or playing games on your device, hold the device
with a relaxed grip, press the keys lightly, use special features that reduce the
number of keys you have to press (such as templates and predictive text), and take
frequent breaks.
Safety precautions
Drive safely at all times
Avoid using your device while driving and obey all regulations that restrict the use
of mobile phones while driving. Use hands-free accessories to increase your safety
when possible.
Follow all safety warnings and regulations
Comply with any regulations that restrict the use of a mobile device in a certain area.
Use only Samsung-approved accessories
Using incompatible accessories may damage your device or cause injury.
Turn off the device near medical equipment
Your device can interfere with medical equipment in hospitals or health care facilities.
Follow all regulations, posted warnings, and directions from medical personnel.
Turn off the device or disable the wireless functions when in an aircraft
Your device can cause interference with aircraft equipment. Follow all airline
regulations and turn off your device or switch to a mode that disables the
wireless functions when directed by airline personnel.
Protect batteries and chargers from damage
Avoid exposing batteries to very cold or very hot temperatures (below 0° C/32° F or
above 45° C/ 113° F). Extreme temperatures can reduce the charging capacity and
life of your batteries.
Prevent batteries from contacting metal objects, as this can create a connection
between the + and - terminals of your batteries and lead to temporary or permanent
battery damage.
Never use a damaged charger or battery.
Handle your device carefully and sensibly
Do not allow your device to get wet—liquids can cause serious damage. Do not
handle your device with wet hands. Water damage to your device can void
your manufacturer’s warranty.
 Avoid using or storing your device in dusty, dirty areas to prevent damage to
moving parts.
 Your device is a complex electronic device— protect it from impacts and
rough handling to avoid serious damage.
 Do not paint your device, as paint can clog moving parts and prevent proper
operation.
 Avoid using the phone’s camera flash or light close to the eyes of children or
animals.
 Your device and memory cards may be damaged by exposure to magnetic
fields. Do not use carrying cases or accessories with magnetic closures or
allow your device to come in contact with magnetic fields for extended
periods of time.
Avoid interference with other electronic devices
Your device emits radio frequency (RF) signals that may interfere with unshielded
or improperly shielded electronic equipment, such as pacemakers, hearing aids,
medical devices, and other electronic devices in homes or vehicles. Consult the
manufacturers of your electronic devices to solve any interference problems you
experience.
Important usage information
Use your device in the normal position
Avoid contact with your phone’s internal antenna.
Allow only qualified personnel to service your device
Allowing unqualified personnel to service your device may result in damage to
your device and will void your warranty.
Ensure maximum battery and charger life
 Avoid charging batteries for more than a week, as overcharging may shorten
battery life.
 Over time, unused batteries will discharge and must be recharged before use.
 Disconnect chargers from power sources when not in use.
 Use batteries only for their intended purpose.
Handle SIM cards and memory cards with care
 Do not remove a card while the device is transferring or accessing
information, as this could result in loss of data and/or damage to the card
or device.
 Protect cards from strong shocks, static electricity, and electrical noise from
other devices.
 Frequent writing and erasing will shorten the life span of memory cards.
 Do not touch gold-coloured contacts or terminals with your fingers or metal
objects. If dirty, wipe the card with a soft cloth.
Ensure access to emergency services
Emergency calls from your device may not be possible in some areas or
circumstances. Before travelling in remote or undeveloped areas, plan an
alternate method of contacting emergency services personnel.
Health and safety information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless device is a radio transmitter and receiver. It is designed and
manufactured not to exceed the exposure limits for radio frequency (RF) energy set
by the Federal Communications Commission (FCC) of the U.S. government. These
FCC exposure limits are derived from the recommendations of two expert
organizations, the National Counsel on Radiation Protection and Measurement
(NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both
cases, the recommendations were developed by scientific and engineering experts
drawn from industry, government, and academia after extensive reviews of the
scientific literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate (SAR). The SAR is a measure
of the rate of absorption of RF energy by the human body expressed in units of watts
per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit
of 1.6 watts per kilogram (1.6 W/ kg). The FCC exposure limit incorporates a
substantial margin of safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions accepted by the FCC
with the device transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power level, the
actual SAR level of the device while operating can be well below the maximum
value. This is because the device is designed to operate at multiple power levels so
as to use only the power required to reach the network. In general, the closer you
are to a wireless base station antenna, the lower the power output.
Before a new model device is available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the exposure limit established by the
FCC. Tests for each model device are performed in positions and locations as
required by the FCC.
SAR information on this and other model phones can be viewed on-line at
http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search,
A3LSMP901. Sometimes it may be necessary to remove the battery pack to find
the number. Once you have the FCC ID number for a particular device, follow the
instructions on the website and it should provide values for typical or maximum SAR
for a particular device. Additional product specific SAR information can also be
obtained at http://www.fcc.gov/encyclopedia/specific-absorption-rate-sar-cellulartelephones
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a series of Questions
and Answers for consumers relating to radio frequency (RF) exposure from wireless
phones. The FDA publication includes the following information:
What kinds of phones are the subject of this update?
The term wireless device refers here to hand-held wireless phones with built-in
antennas, often called “cell,” “mobile,” or “PCS” phones. These types of wireless
phones can expose the user to measurable radio frequency energy (RF) because of
the short distance between the device and the user's head. These RF exposures
are limited by Federal Communications Commission safety guidelines that were
developed with the advice of FDA and other federal health and safety agencies.
When the device is located at greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure decreases rapidly with increasing
distance from the source. The so-called “cordless phones,” which have a base unit
connected to the telephone wiring in a house, typically operate at far lower power
levels, and thus produce RF exposures well within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are
associated with using wireless phones. There is no proof, however, that wireless
phones are absolutely safe. Wireless phones emit low levels of radio frequency
energy (RF) in the microwave range while being used. They also emit very low levels
of RF when in the stand-by mode. Whereas high levels of RF can produce health
effects (by heating tissue), exposure to low level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies have suggested that
some biological effects may occur, but such findings have not been confirmed by
additional research. In some cases, other researchers have had difficulty in
reproducing those studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation-emitting consumer
products such as wireless phones before they can be sold, as it does with new drugs
or medical devices. However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level that is hazardous to
the user. In such a case, FDA could require the manufacturers of wireless phones to
notify users of the health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory actions, FDA has
urged the wireless device industry to take a number of steps, including the following:
 “Support needed research into possible biological effects of RF of the type
emitted by wireless phones;
 “Design wireless phones in a way that minimizes any RF exposure to the
user that is not necessary for device function; and
 “Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless device use on human health.
FDA belongs to an interagency working group of the federal agencies that have
responsibility for different aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this working group:
 “National Institute for Occupational Safety and Health
 “Environmental Protection Agency
 “Federal Communications Commission
 “Occupational Safety and Health Administration
 “National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working group
activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal
Communications Commission (FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA
and other health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless device networks rely upon.
While these base stations operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless phones. Base
stations are thus not the primary subject of the safety questions discussed in this
document.
What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies have
suffered from flaws in their research methods. Animal experiments investigating the
effects of radio frequency energy (RF) exposures characteristic of wireless phones
have yielded conflicting results that often cannot be repeated in other laboratories. A
few animal studies, however, have suggested that low levels of RF could accelerate
the development of cancer in laboratory animals. However, many of the studies that
showed increased tumor development used animals that had been genetically
engineered or treated with cancer-causing chemicals so as to be pre-disposed to
develop cancer in absence of RF exposure. Other studies exposed the animals to
RF for up to 22 hours per day. These conditions are not similar to the conditions
under which people use wireless phones, so we don't know with certainty what the
results of such studies mean for human health.
Three large epidemiology studies have been published since December 2000.
Between them, the studies investigated any possible association between the use of
wireless phones and primary brain cancer, glioma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful health effects from wireless
phones RF exposures. However, none of the studies can answer questions about
long-term exposures, since the average period of device use in these studies was
around three years.
What research is needed to decide whether RF exposure from wireless phones
poses a health risk?
A combination of laboratory studies and epidemiological studies of people actually
using wireless phones would provide some of the data that are needed. Lifetime
animal exposure studies could be completed in a few years. However, very large
numbers of animals would be needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide data that is directly
applicable to human populations, but ten or more years' follow-up may be needed to
provide answers about some health effects, such as cancer. This is because the
interval between the time of exposure to a cancer-causing agent and the time tumors
develop - if they do - may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in measuring actual RF exposure
during day-to-day use of wireless phones. Many factors affect this measurement,
such as the angle at which the device is held, or which model of device is used.
What is FDA doing to find out more about the possible health effects of
wireless device RF?
FDA is working with the U.S. National Toxicology Program and with groups of
investigators around the world to ensure that high priority animal studies are
conducted to address important questions about the effects of exposure to radio
frequency energy (RF).
FDA has been a leading participant in the World Health Organization international
Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result
of this work has been the development of a detailed agenda of research needs that
has driven the establishment of new research programs around the world. The
Project has also helped develop a series of public information documents on EMF
issues.
FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal
Cooperative Research and Development Agreement (CRADA) to do research on
wireless device safety. FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations. CTIA-funded research
is conducted through contracts to independent investigators. The initial research will
include both laboratory studies and studies of wireless device users. The CRADA
will also include a broad assessment of additional research needs in the context of
the latest research developments around the world.
What steps can I take to reduce my exposure to radio frequency energy from
my wireless device?
If there is a risk from these products - and at this point we do not know that there is it is probably very small. But if you are concerned about avoiding even potential risks,
you can take a few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless device will reduce RF exposure.
 “If you must conduct extended conversations by wireless device every day,
you could place more distance between your body and the source of the RF,
since the exposure level drops off dramatically with distance. For example,
you could use a headset and carry the wireless device away from your body.
Again, the scientific data do not demonstrate that wireless phones are harmful. But if
you are concerned about the RF exposure from these products, you can use
measures like those described above to reduce your RF exposure from wireless
device use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones,
including children and teenagers. If you want to take steps to lower exposure to radio
frequency energy (RF), the measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless device use and
increasing the distance between the user and the RF source will reduce RF
exposure.
Some groups sponsored by other national governments have advised that children
be discouraged from using wireless phones at all. For example, the government in
the United Kingdom distributed leaflets containing such a recommendation in
December 2000. They noted that no evidence exists that using a wireless device
causes brain tumors or other ill effects. Their recommendation to limit wireless
device use by children was strictly precautionary; it was not based on scientific
evidence that any health hazard exists.
Do hands-free kits for wireless phones reduce risks from exposure to RF
emissions?
Since there are no known risks from exposure to RF emissions from wireless phones,
there is no reason to believe that hands-free kits reduce risks. Hands-free kits can be
used with wireless phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the device, which is the source of the
RF emissions, will not be placed against the head. On the other hand, if the device is
mounted against the waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in the U.S. are
required to meet safety requirements regardless of whether they are used against
the head or against the body. Either configuration should result in compliance with
the safety limit.
Do wireless device accessories that claim to shield the head from RF radiation
work?
Since there are no known risks from exposure to RF emissions from wireless phones,
there is no reason to believe that accessories that claim to shield the head from those
emissions reduce risks. Some products that claim to shield the user from RF
absorption use special device cases, while others involve nothing more than a
metallic accessory attached to the device. Studies have shown that these products
generally do not work as advertised. Unlike “hand-free” kits, these so-called “shields”
may interfere with proper operation of the device. The device may be forced to boost
its power to compensate, leading to an increase in RF absorption. In February 2002,
the Federal trade Commission (FTC) charged two companies that sold devices that
claimed to protect wireless device users from radiation with making false and
unsubstantiated claims. According to FTC, these defendants lacked a reasonable
basis to substantiate their claim.
What about wireless device interference with medical equipment?
Radio frequency energy (RF) from wireless phones can interact with some electronic
devices. For this reason, FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This standard will allow
manufacturers to ensure that cardiac pacemakers and defibrillators are safe from
wireless device EMI. FDA has tested wireless phones and helped develop a
voluntary standard sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance requirements for
hearing aids and wireless phones so that no interference occurs when a person
uses a compatible device and a compatible hearing aid at the same time. This
standard was approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible interactions with
other medical devices. Should harmful interference be found to occur, FDA will
conduct testing to assess the interference and work to resolve the problem.
Additional information on the safety of RF exposures from various sources can be
obtained from the following organizations:
 FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
 Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
 Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/index.html
 National institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/
 World health Organization (WHO):
http://www.who.int/peh-emf/
 International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
 National Radiation Protection Board (UK):
http://www.hpa-radiationservices.org.uk/rpa
 Updated 4/3/2002: US food and Drug Administration
http://www.fda.gov/RadiationEmittingProducts/RadiationEmittingProductsandProcedures/HomeBusinessandEntertainment/
CellPhones/default.htm
Road Safety
Your wireless device gives you the powerful ability to communicate by voice,
almost anywhere, anytime. But an important responsibility accompanies the
benefits of wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When using your wireless
device behind the wheel of a car, practice good common sense and remember the
following tips:
1. Get to know your wireless device and its features, such as speed dial and
redial. If available, these features help you to place your call without taking
your attention off the road.
2. When available, use a hands-free device. If possible, add an additional layer
of convenience and safety to your wireless device with one of the many
hands free accessories available today.
3. Position your wireless device within easy reach. Be able to access your
wireless device without removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet,
snow, ice and even heavy traffic can be hazardous.
5. Do not take notes or look up device numbers while driving. Jotting down a “to
do” list or flipping through your address book takes attention away from your
primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls when you are not
moving or before pulling into traffic. Try to plan calls when your car will be
stationary. If you need to make a call while moving, dial only a few numbers,
check the road and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that may be distracting.
Make people you are talking with aware you are driving and suspend
conversations that have the potential to divert your attention from the road.
8. Use your wireless device to call for help. Dial 9-1-1 or other local emergency
number in the case of fire, traffic accident or medical emergencies.
Remember, it is a free call on your wireless device!
9. Use your wireless device to help others in emergencies. If you see an auto
accident, crime in progress or other serious emergency where lives are in
danger, call 9-1-1 or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency wireless assistance
number when necessary. If you see a broken-down vehicle posing no serious
hazard, a broken traffic signal, a minor traffic accident where no one appears
injured, or a vehicle you know to be stolen, call roadside assistance or other
special non-emergency number.
“The wireless industry reminds you to use your device safely when driving.”
For more information, please call 1-888-901-SAFE, or visit our web-site
www.wow-com.com
Provided by the Cellular Telecommunications & Internet Association
Operating Environment
Remember to follow any special regulations in force in any area and always switch
your device off whenever it is forbidden to use it, or when it may cause interference
or danger. When connecting the device or any accessory to another device, read
its user's guide for detailed safety instructions. Do not connect incompatible
products. As with other mobile radio transmitting equipment, users are advised that
for the satisfactory operation of the equipment and for the safety of personnel, it is
recommended that the equipment should only be used in the normal operating
position.
Using Your Device Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF) signals.
However, certain electronic equipment may not be shielded against the RF signals
from your wireless device. Consult the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum distance of 15 cm (6
inches) be maintained between a wireless device and a pacemaker to avoid
potential interference with the pacemaker.
These recommendations are consistent with the independent research and
recommendations of Wireless Technology Research.
Persons with pacemakers:
 should always keep the device more than 15 cm
(6 inches) from their pacemaker when the device is switched on.
 should not carry the device in a breast pocket.
 should use the ear opposite the pacemaker to minimize potential interference.
If you have any reason to suspect that interference is taking place, switch your
device off immediately.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the event of
such interference, you may wish to consult your hearing aid manufacturer to discuss
alternatives.
Other Medical Devices
If you use any other personal medical devices, consult the manufacturer of your
device to determine if it is adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this information. Switch your device
off in health care facilities when any regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles. Check with the manufacturer or its representative
regarding your vehicle. You should also consult the manufacturer of any equipment
that has been added to your vehicle.
Posted Facilities
Switch your device off in any facility where posted notices require you to do so.
Potentially Explosive Environments
Switch your device off when in any area with a potentially explosive atmosphere and
obey all signs and instructions. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch the device off while at a refueling point (service station).
Users are reminded of the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution areas), chemical plants or
where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often but not always clearly
marked. They include below deck on boats, chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such as propane or butane), areas where the
air contains chemicals or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn off your vehicle engine.
Emergency Calls
This device, like any wireless devices, operates using radio signals, wireless and
landline networks as well as user programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never rely solely on any wireless
device for essential communications (medical emergencies, for example).
Remember, to make or receive any calls the device must be switched on and in a
service area with adequate signal strength. Emergency calls may not be possible on
all wireless device networks or when certain network services and/ or device
features are in use. Check with local service providers.
To make an emergency call:
1. If the device is not on, switch it on.
2. Key in the emergency number for your present location (for example, 911 or
other official emergency number). Emergency numbers vary by location.
3. Press
If certain features are in use (call barring, for example), you may first need to
deactivate those features before you can make an emergency call. Consult this
document and your local cellular service provider.
When making an emergency call, remember to give all the necessary information
as accurately as possible. Remember that your device may be the only means of
communication at the scene of an accident; do not cut off the call until given
permission to do so.
Restricting Children's access to your Device
Your device is not a toy. Children should not be allowed to play with it because they
could hurt themselves and others, damage the device or make calls that
increases your Wireless bill.
FCC Notice and Cautions
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
 This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device may cause TV or radio interference if used in close proximity to
receiving equipment. The FCC can require you to stop using the device if such
interference cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or butane) must comply
with the National Fire Protection Standard (NFPA-58). For a copy of this standard,
contact the National Fire Protection Association, One Battery march Park, Quincy,
MA 02269, Attn: Publication Sales Division.
Cautions
Changes or modifications made in the radio device, not expressly approved by
Samsung, will void the user’s authority to operate the equipment.
The use of any unauthorized accessories may be dangerous and void the device
warranty if said accessories cause damage or a defect to the device.
Although your device is quite sturdy, it is a complex piece of equipment and can
be broken. Avoid dropping, hitting, bending or sitting on it.
Other Important Safety Information
 Only qualified personnel should service the device or install the device in a
vehicle. Faulty installation or service may be dangerous and may invalidate
any warranty applicable to the device.
 Check regularly that all wireless device equipment in your vehicle is mounted
and operating properly.
 Do not store or carry flammable liquids, gases or explosive materials in the
same compartment as the device, its parts or accessories.
 For vehicles equipped with an air bag, remember that an air bag inflates with
great force. Do not place objects, including both installed or portable wireless
equipment in the area over the air bag or in the air bag deployment area. If
wireless equipment is improperly installed and the air bag inflates, serious
injury could result.
 Switch your device off before boarding an aircraft. The use of wireless device
in aircraft is illegal and may be dangerous to the aircraft's operation.
 Failure to observe these instructions may lead to the suspension or denial of
telephone services to the offender, or legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the signal strength in
your area. Your device informs you of the current signal strength by displaying a
number of bars next to the signal strength icon. The more bars displayed, the
stronger the signal.
If you're inside a building, being near a window may give you better reception.
Understanding the Power Save Feature
If your device is unable to find a signal after 15 minutes of searching, a Power
Save feature is automatically activated. If your device is active, it periodically
rechecks service availability or you can check it yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays on the screen.
When a signal is found, your device returns to standby mode.
Maintaining Your Phone's Peak Performance
For the best care of your device, only authorized personnel should service
your device and accessories. Faulty service may void the warranty.
There are several simple guidelines to operating your device properly and
maintaining safe, satisfactory service.
 Place the mobile phone's acoustic output next to your ear for proper
orientation.
 Do not tamper or alter the phone's antenna.
 Don't use the device if the antenna is damaged.
 Speak directly into the phone's receiver.
 Avoid exposing your device and accessories to rain or liquid spills. If your
device does get wet, immediately turn the power off and remove the battery.
If it is inoperable, call Customer Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may require additional
subscription and/or usage charges. Not all features are available for purchase or use
in all areas. Downloadable Ring Tones may be available at an additional cost. Other
conditions and restrictions may apply. See your service provider for additional
information.
Battery Standby and Talk Time
Standby and talk times will vary depending on device usage patterns and conditions.
Battery power consumption depends on factors such as network configuration, signal
strength, operating temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.
Battery Precautions
 Never use any charger or battery that is damaged in any way.
 Use the battery only for its intended purpose.
 If you use the device near the network's base station, it uses less power; talk
and standby time are greatly affected by the signal strength on the cellular
network and the parameters set by the network operator.
 Battery charging time depends on the remaining battery charge and the type
of battery and charger used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out. When the operation time
(talk time and standby time) is noticeably shorter than normal, it is time to buy
a new battery.
 If left unused, a fully charged battery will discharge itself over time.
 Use only Samsung-approved batteries and recharge your battery only with
Samsung-approved chargers. When a charger is not in use, disconnect it
from the power source. Do not leave the battery connected to a charger for
more than a week, since overcharging may shorten its life.
 Extreme temperatures will affect the charging capacity of your battery: it may
require cooling or warming first.
 Do not leave the battery in hot or cold places, such as in a car in summer or
winter conditions, as you will reduce the capacity and lifetime of the battery.
Always try to keep the battery at room temperature. A device with a hot or
cold battery may temporarily not work, even when the battery is fully charged.
Li-ion batteries are particularly affected by temperatures below 0 °C (32 °F).
 Do not short-circuit the battery. Accidental short- circuiting can occur when a
metallic object (coin, clip or pen) causes a direct connection between the +
and - terminals of the battery (metal strips on the battery), for example when
you carry a spare battery in a pocket or bag. Short-circuiting the terminals
may damage the battery or the object causing the short-circuiting.
 Dispose of used batteries in accordance with local regulations. In some areas,
the disposal of batteries in household or business trash may be prohibited.
For safe disposal options for Li-Ion batteries, contact your nearest Samsung
authorized service center. Always recycle. Do not dispose of batteries in a
fire.
Care and Maintenance
Your device is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you fulfill any warranty obligations
and allow you to enjoy this product for many years.
 Keep the device and all its parts and accessories out of the reach of small
children.
 Keep the device dry. Precipitation, humidity and liquids contain minerals that
will corrode electronic circuits.
 Do not use the device with a wet hand. Doing so may cause an electric shock
to you or damage to the device.
 Do not use or store the device in dusty, dirty areas, as its moving parts may
be damaged.
 Do not store the device in hot areas. High temperatures can shorten the life
of electronic devices, damage batteries, and warp or melt certain plastics.
 Do not store the device in cold areas. When the device warms up to its
normal operating temperature, moisture can form inside the device, which
may damage the phone's electronic circuit boards.
 Do not drop, knock or shake the device. Rough handling can break internal
circuit boards.
 Do not use harsh chemicals, cleaning solvents or strong detergents to clean
the device. Wipe it with a soft cloth slightly dampened in a mild soap-andwater solution.
 Do not paint the device. Paint can clog the device's moving parts and prevent
proper operation.
 Do not put the device in or on heating devices, such as a microwave oven, a
stove or a radiator. The device may explode when overheated.
 When the device or battery gets wet, the label indicating water damage inside
the device changes color. In this case, device repairs are no longer
guaranteed by the manufacturer's warranty, even if the warranty for your
device has not expired.
 If your device has a flash or light, do not use it too close to the eyes of people
or animals. This may cause damage to their eyes.
 Use only the supplied or an approved replacement antenna. Unauthorized
antennas or modified accessories may damage the device and violate
regulations governing radio devices.
 If the device, battery, charger or any accessory is not working properly, take it
to your nearest qualified service facility. The personnel there will assist you,
and if necessary, arrange for service.
Correct disposal of this product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems)
This marking shown on the product or its literature, indicates that it should not be
disposed with other household wastes at the end of its working life. To prevent
possible harm to the environment or human health from uncontrolled waste disposal,
please separate this from other types of wastes and recycle it responsibly to promote
the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take this item
for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of
the purchase contract. This product should not be mixed with other commercial
wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate
battery return systems)
This marking on the battery, manual or packaging indicates that the batteries in this
product should not be disposed of with other household waste at the end of their
working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the
battery contains mercury, cadmium or lead above the reference levels in EC
Directive 2006/66. If batteries are not properly disposed of, these substances can
cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate
batteries from other types of waste and recycle them through your local, free battery
return system.
Introducing your mobile Device
In this section, learn about your mobile phone’s layout, keys, display, and icons
Unpack
Check your product box for the following items:
 Mobile device
 Battery
 Travel adapter (charger)
 User manual
The items supplied with your device may vary depending on the software
and accessories available in your region or offered by your service provider. You
can obtain additional accessories from your local Samsung dealer.
Device layout
The front of your device includes the following keys and features:
The rear of your device includes the following keys and features:
Keys
Key
Softkeys
4-way navigation
Confirm
Dial
Power/ Menu exit
Alpha-numeric
Special function
Volume
Function
Perform actions indicated at the bottom of the display; In
Idle mode, press and hold the left softkey to access the
simplified menus
In Idle mode, access user-defined menus
(left/right/up/down); In Menu mode, scroll through menu
options
In Idle mode, launch the web browser; In Menu mode,
select the highlighted menu option or confirm an input
Make or answer a call; In Idle mode, retrieve recently
dialled, missed, or received numbers
Turn the device on and off (press and hold); End a call;
In Menu mode, cancel input and return to Idle mode
Enter numbers, letters and special characters; In Idle
mode, press and hold [1] to access voice mails and [0] to
enter an international call prefix
Enter special characters or perform special functions; In
Idle mode, press and hold [#] for the silent profile; Press
and hold [*] to enter a pause between numbers
Adjust the phone’s volume
Display
Your phone’s display consists of three areas:
Icon line
Displays various icons
Text and graphic area
Displays messages, instructions, and information you enter
Softkey line
Displays the current actions assigned to each softkey
Icons
Learn about the icons that appear on your display.
Definition
Signal strength
Call in progress
New text message
assembling and preparing
your mobile device
Get started by assembling and setting up
your mobile device for its first use.
Install the SIM card and battery
When you subscribe to a cellular service, you will receive a Subscriber Identity
Module, or SIM card, with subscription details, such as your personal identification
number (PIN) and optional services.
To install the SIM card and battery,
1. Remove the battery cover. If the device is on, press and hold
] to turn it
[ off.
2. Insert the SIM card. Place the SIM card in the device with the gold-coloured
contacts facing down.
3. Insert the battery.
4. Replace the battery cover.
Charge the battery
Before using the device for the first time, you must charge the battery.
1. Open the cover to the multifunction jack on the side of the device.
2. Plug the small end of the travel adapter into the multifunction jack. Improperly
connecting the travel adapter can cause serious damage to the device. Any
damages by misuse are not covered by the warranty.
3. Plug the large end of the travel adapter into a power outlet.
4. When the battery is fully charged (the [|||||] icon is no longer moving), unplug
the travel adapter from the power outlet.
5. Unplug the travel adapter from the device.
6. Close the cover to the multifunction jack.
About the low battery indicator
When your battery is low, the device will emit a warning tone and a low battery
message. The battery icon will also be empty and blinking. If the battery level
becomes too low, the device will automatically power off. Recharge your battery
to continue using your device.
using basic functions
Learn how to perform basic operations and use the main features of your mobile
device.
Turn your device on and off
To turn your device on,
1. Slide open the device.
2. Press and hold [
].
3. Enter your PIN and press  (if necessary).
4. When the setup wizard opens, customise your device as desired by following
the screen.
To turn your device off, repeat steps 1 and 2 above.
Switch to the offline profile
By switching to the offline profile, you can use your phone’s non-network services in
areas where wireless devices are prohibited, such as aeroplane and hospitals.
To switch to the offline profile, in Menu mode, select Settings Õ device profiles
Õ Offline.
Follow all posted warnings and directions from official personnel when in areas
where wireless devices are prohibited.
Access menus
To access your phone’s menus,
1. In Idle mode, press  to access Menu mode.
2. Use the navigation key to scroll to a menu or option.
3. Press [OK], , or  to confirm the highlighted option.
4. Press  to move up one level; Press [
] to return to Idle mode.
Customise your device
Get more from your device by customising it to match your preferences.
Adjust the volume of the key tones
In Idle mode, press the Volume key up or down to adjust the key tone volume.
Switch to or from the silent profile
In Idle mode, press and hold [#] to silence or unsilence your device.
Change your ringtone
1. In Menu mode, select Settings Õ device profiles .
2. Scroll to the profile you are using.
3. Press  Õ Edit Õ Voice call ringtone.
4. Select a ringtone category Õ a ringtone.
5. Press  Õ Select (if necessary).
6. Press .
To switch to another profile, select it from the list.
Create a device profile
1. In Menu mode, select Settings Õ device profiles .
2. Press  Õ Create.
3. Enter a name for the profile and press  Õ Save.
4. Customise the sound settings as desired.
5. When you are finished, press .
6.
Select a wallpaper (Idle mode)
1. In Menu mode, select Settings Õ Display and light Õ Home screen.
2. Scroll left or right to Images.
3. Select Wallpaper.
4. Select an image category Õ an image.
5. Press  or  Õ .
6. Press .
Select a theme for the display
To select a theme,
1. In Menu mode, select Settings Õ Display and light Õ My theme.
2. Scroll to a theme and press .
To create and apply a theme,
1. In Menu mode, select Settings Õ Display and light Õ My theme.
2. Scroll to Create and press .
3. Customise the theme as desired by following the screen.
4. When you have finished, enter a name for the theme and press .
5. Press  to apply the theme.
Set menu shortcuts
1. In Menu mode, select Settings Õ device settings Õ Shortcuts.
2. Select a key to use as a shortcut.
3. Select a menu to assign to the shortcut key.
Use the simplified menus
To set up simplified menu items,
1. In Idle mode, press [OK].
2. Press  Õ Customise menu.
3.
4.
5.
6.
7.
8.
Select your favourite menus.
Press  Õ Open to select submenus (if necessary).
Press .
To access an item from the simplified menus,
In Idle mode, press [OK].
Scroll to the menu item you want and press [OK].
Lock your device
1. In Menu mode, select Settings Õ Security Õ device lock Õ On.
2. Enter a new 4- to 8-digit password and press .
3. Enter the new password again and press .
Use basic call functions
Learn to make or answer calls and use basic call functions.
Make a call
1. In Idle mode, enter an area code and a device number.
2. Press [
] to dial the number
3. To end the call, press [
].
Answer a call
1. When a call comes in, press [
2. To end the call, press [
].
].
Adjust the volume
To adjust the volume during a call, press the Volume key up or down.
Use the speakerphone feature
1. During a call, press [OK] Õ  to activate the speaker.
2. To switch back to the earpiece, press [OK] again.
In noisy environment, you may have difficulty hearing the calls while using the
speakerphone feature. For better performance, use the normal device mode.
Use the headset
By plugging the supplied headset into the multifunction jack, you can make and
answer calls:
 To redial the last call, press and hold the headset button.
 To answer a call, press the headset button.
 To end a call, press the headset button.
Send and view messages
Learn to send or view text (SMS), multimedia (MMS), or email messages.
Send a text or multimedia message
1. In Menu mode, select Messages Õ Create new message Õ Message.
2. Enter a destination number or an email address and scroll down.
3. Enter your message text.
For sending as a text message, skip to step 5.
For attaching multimedia, continue with step 4.
4. Press  Õ Add multimedia and add an item.
5. Press [OK] Õ Send to send the message.
Send an email
1. In Menu mode, select Messages Õ Create new message Õ Email.
2. Enter an email address and scroll down.
3. Enter a subject and scroll down.
4. Enter your email text.
5. Press  Õ Attach multimedia and attach a file (if necessary).
6. Press [OK] Õ Send to send the message.
Enter text
When entering text, you can change the text input mode:
 Press and hold [*] to switch between T9 and ABC modes. Depending on your
country, you may be able to access an input mode for your specific language.
 Press [*] to change case or switch to Number mode.
 Press and hold [#] to switch to Symbol mode.
Enter text in one of the following modes:
Mode
ABC
T9
Number
Symbol
Function
Press the appropriate alphanumeric key until the character you
want appears on the display.
1. Press the appropriate alphanumeric keys to enter an entire
word.
2. When the word displays correctly, press [0] to insert a
space. If the correct word does not display, select an
alternate word from the list that appears.
Press the appropriate alphanumeric key to enter a number.
Press the appropriate alphanumeric key to select a symbol.
View text or multimedia messages
1. In Menu mode, select Messages Õ My messages Õ Inbox.
2. Select a text or multimedia message.
View an email
1. In Menu mode, select Messages Õ My messages Õ Email inbox.
2. Select Check new email.
3. Select an email or a header.
4. If you selected a header, press  Õ Retrieve to view the body of the
email.
Add and find contacts
Learn the basics of using the phonebook feature.
Add a new contact
1. In Idle mode, enter a device number and press .
2. Select Save Õ a memory location (device or SIM) Õ New.
3. Select a number type (if necessary).
4. Enter contact information.
5. Press  Õ Save to add the contact to memory.
Find a contact
1. In Menu mode, select Phonebook.
2. Enter the first few letters of the name you want to find.
3. Select the contact’s name from the search list.
Once you have found a contact, you can:
 call the contact by pressing []
 edit the contact information by pressing [OK]
Connectivity
Bluetooth
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 10 m
without requiring a physical connection.
You do not need to line up the devices to beam information with Bluetooth. If
the devices are within range of one another, you can exchange information
between them even if they are located in different rooms.
Samsung is not responsible for the loss, interception, or misuse
of data sent or received via the Bluetooth wireless feature.
Always ensure that you share and receive data with devices that are
trusted and properly secured. If there are obstacles between the devices, the
operating distance may be reduced.
Some devices, especially those that are not tested or approved by
Bluetooth SIG, may be incompatible with your device.
›
Turn on the Bluetooth wireless feature
1 In Menu mode, select Settings →Connectivity → Bluetooth.
2 Select Bluetooth to turn on the Bluetooth wireless feature.
3 To allow other devices to locate your device, select
→ Settings → My phone’s visibility → Always
›
Turn off the Bluetooth wireless feature
1. In Menu mode, select Settings →Connectivity → Bluetooth.
2. Select Bluetooth to turn off the Bluetooth wireless feature.
If you selected Custom, enter duration that your device is visible and select
Done.
Once the Bluetooth wireless feature is active, select
following options:
and use the
To change your device’s name, select Settings → My phone’s name.
To set limits on browsing your files to others, select Settings → Secure
mode.
To check Bluetooth services available on your device and information
about the services, select Bluetooth services.
› Find and pair with other Bluetooth-enabled devices
1 In Menu mode, select Settings →Connectivity → Bluetooth
→Search.
2 Select a device.
3 Enter a PIN for the Bluetooth wireless feature or the other device’s
Bluetooth PIN, if it has one, and select Done. Alternatively, select Yes to
match the PIN between your device and the device.
When the owner of the other device enters the same PIN or accepts the
connection, pairing is complete. If the pairing is successful, the device will
automatically search for available services.
Some devices, especially headsets or hands-free car kits, may have a
fixed Bluetooth PIN, such as 0000. If the other device has a PIN, you must
enter it.
Once the device is paired with another Bluetooth-enabled
device, the device icon will turn green.
Select a paired device and use the following options:
To browse files on the paired device, select Browse files.
To view the service list of the paired device, select Service list.
To change the paired device name, select Rename.
To allow the paired device to access and browse your files, select
Authorise device.
To send your files to the paired device, select Send My files.
To end the connection and delete the paired device, select Delete.
›
Send data using the Bluetooth wireless feature
1 Select a file or item, such as a contact, calendar event, memo, task, or
media file, from an appropriate application or My files.
2 Select
→ an option for sending via Bluetooth. 3 Search for and pair
with a Bluetooth-enabled device.
›Receive data using the Bluetooth wireless feature
1 Enter the PIN for the Bluetooth wireless feature and select OK (if
necessary).
2 Select Yes to confirm that you are willing to receive data from the device
(if necessary).
Received data is saved to an appropriate application or folder according to its
type. For example, a music or sound clip is saved to the sound folder and a
contact to the phonebook.
›
Use Remote SIM mode
In Remote SIM mode, you can make or answer calls only with a connected
Bluetooth hands-free car kit via the SIM or USIM card on your device. To
activate Remote SIM mode,
1 In Menu mode, select Settings →Connectivity → Bluetooth.
2 Select
→ Settings → Remote SIM mode.
To use Remote SIM mode, start the Bluetooth connection from a Bluetooth
hands-free car kit.
You must authorise the Bluetooth hands-free car kit.
Wi-Fi
Learn to use your device’s wireless networking capabilities to activate and
connect to any wireless local area network (WLAN) compatible with the
IEEE 802.11 a/b/g/n/ac standards.
You can connect to the internet or other network devices anywhere an
access point or wireless hotspot is available.
Your device uses non-harmonised frequency and is intended for use in
all European countries. The WLAN can be operated in the EU without
restriction indoors, but cannot be operated outdoors in France.
›
Activate the WLAN feature
In Menu mode, select Settings →Connectivity →Wi-Fi.
An active WLAN running in the background will consume battery
power. To preserve battery power, activate the WLAN only when needed.
›
Deactivate the WLAN feature
In Menu mode, select Settings →Connectivity →Wi-Fi.
›
Find and connect to a WLAN
1 In Menu mode, select Settings →Connectivity →Wi-Fi. The device
will automatically search for available WLANs. 2 Select the check box
next to a network. 3 Enter a password for the network and select
Done (if necessary).
›
Customise the connection profile
1 In Menu mode, select Settings →Connectivity →Wi-Fi. 2 Select
the discovered WLAN AP. The current connection profile for the
network appears. 3 Customise the connection profile of the selected
WLAN:
Option
Function
Name
Security
type EAP
method
View the name of the profile.
View the security type of the
WLAN AP. Select an EAP
method. This option is available
depending on the selected
security type.
Enter your user name. This
option is available depending on
the selected security type.
Enter your password. This option
is available depending on the
selected security type.
View your IP address of the
WLAN AP.
Select the IP address type of the
WLAN AP.
User name
Password
IP address
IP address
type
Option
Proxy
address and
port
AP MAC
Function
Enter the address and port
number of the proxy server.
View the MAC address of the
WLAN AP.
To delete all details of the connection profile, select Forget.
›
Connect to a WLAN using a Wi-Fi Protected Setup
(WPS)
1 In Menu mode, select Settings →Connectivity →Wi-Fi. 2
Select WPS PBC or WPS PIN depending on the AP device type.
3 Press a WPS button on the AP device within 2 minutes. Or,
enter a PIN on the AP device and select Start within 2 minutes.
Mobile AP
Learn about the Mobile AP feature, which sets your device as an wireless AP
(Access Point) to connect to the internet on other network devices.
1 In Menu mode, select Settings → Connectivity → Mobile AP.
2 Select Mobile AP on the top to activate the Mobile AP feature.
3 Select OK to confirm.
IC notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
PC Connections
You can connect your device to a PC using an optional PC data cable using various USB connection
modes. When you connect the device to a PC, you can synchronize files with Windows Media Player,
transfer data to and from your device directly, or launch Samsung PC Studio when a USB connection
is detected.
Configuring Your Device USB Settings
Configuring Your Device USB Settings
This menu selects the method of communication for the USB
port.
Note: The Bluetooth feature must first be disabled before initiating a USB connection with the
device. Prior to connecting the USB cable to the device, install the latest version of the PC Studio
application. This application installs the necessary USB drivers onto your machine. For a free
download of PC Studio, go to www.samsung.com/us/support.
1.Touch ➔ Settings ➔ Connectivity ➔ Select USB mode.
2. Select one of the following USB modes:
•Ask on connection: causes the device to present a “Select USB Mode” pop-up when
you connect to the PC. You can then choose from either: Samsung PC Studio, Media
player, or Mass storage.
•Samsung PC Studio: sets PC Studio to launch as the default application when a USB
connection is detected.
•Media player: sets the Media Player to launch as the default application when a USB
connection is detected.
•Mass storage: allows you to utilize the onboard storage capacity of the phone’s microSD
card to store and upload files. This option allows your computer to detect the phone’s
microSD card as a removable storage drive.
3.Touch Save.
troubleshooting
If you are having trouble with your mobile device, try these troubleshooting
procedures before contacting a service professional.
While using your device, the following messages may appear:
Message
Please insert SIM card
Device lock
Enter PIN
Enter PUK
Try this to solve the problem:
Ensure that the SIM card is installed
correctly.
When the device lock feature is
enabled, you must enter the password
you set for the device.
When using the device for the first time
or when the PIN requirement is enabled,
you must enter the PIN supplied with the
SIM card. You can disable this feature
by using the PIN lock menu.
Your SIM card is blocked, usually as a
result of entering your PIN incorrectly
several times. You must enter the PUK
supplied by your service provider.
Your device displays “Network unavailable” or “Network error.”
 When you are in areas with weak signals or poor reception, you may lose
reception. Move to another area and try again.
 You cannot access some options without a subscription. Contact your service
provider for more details.
You enter a number, but the call is not dialled.
 Ensure that you have pressed the Dial key: [
].
 Ensure that you have accessed the right cellular network.
 Ensure that you have not set call barring for the phone number.
Another caller cannot reach you.
 Ensure that your device is turned on.
 Ensure that you have accessed the right cellular network.
 Ensure that you have not set call barring for the phone number.
Another caller cannot hear you speaking.
 Ensure that you are not covering the built-in microphone.
 Ensure that the microphone is close to your mouth.
 If using a headset, ensure that it is properly connected.
The device beeps and the battery icon flashes.
Your battery is low. Recharge or replace the battery to continue using the device.
The audio quality of the call is poor.
 When you are in areas with weak signals or poor reception, you may lose
reception or experience poor audio quality. Move to another area and try
again.
 When you are in areas with weak signals or poor reception, you may lose
reception. Move to another area and try again.
You select a contact to call, but the call is not dialled.
 Ensure that the correct number is stored in the contact list.
 Re-enter and save the number, if necessary.
The battery does not charge properly or sometimes the device turns itself off.
 The battery terminals may be dirty. Wipe both gold-coloured contacts with a
clean, soft cloth and try charging the battery again.
 If the battery will no longer charge completely, dispose of the old battery
properly and replace it with a new battery.
Your device is hot to the touch.
When you use several applications at once, your device requires more power
and may heat up.
This is normal and should not affect your phone’s lifespan or performance.
Some of the contents in this manual may differ from your device depending
on the software of the device or your service provider.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-XXXXXA
English (EU). 10/2011. Draft.05
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : 
Create Date                     : 2013:10:23 15:50:22+09:00
Modify Date                     : 2013:11:08 15:42:24-05:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 9.2.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2013:11:08 15:42:24-05:00
Format                          : application/pdf
Title                           : Microsoft Word - _A3LSMP901_User manual-FCC_Draft6.1_final_131023.doc
Creator                         : 
Document ID                     : uuid:64cd3c68-b14b-4cf4-bb38-45073db66ea4
Instance ID                     : uuid:89b24be4-331c-4634-95b3-4bd87127ed77
Page Count                      : 37

EXIF Metadata provided by EXIF.tools
FCC ID Filing: A3LSMP901

				
				

							
		
		

			
Navigation menu