Samsung Electronics Co SMW723 Tablet User Manual A3LSMW723 rev 1

Samsung Electronics Co Ltd Tablet A3LSMW723 rev 1

A3LSMW723_User Manual_rev.1

Download: Samsung Electronics Co SMW723 Tablet User Manual A3LSMW723  rev 1
Mirror Download [FCC.gov]Samsung Electronics Co SMW723 Tablet User Manual A3LSMW723  rev 1
Document ID3302302
Application IDsTJ2KiuTIdA18gm5rgU/xA==
Document DescriptionA3LSMW723_User Manual_rev.1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize16.13kB (201583 bits)
Date Submitted2017-03-02 00:00:00
Date Available2017-08-29 00:00:00
Creation Date2016-03-23 15:22:32
Producing SoftwareAdobe PDF Library 15.0
Document Lastmod2017-03-03 03:09:51
Document TitleA3LSMW723_User Manual_rev.1
Document CreatorAdobe InDesign CC 2015 (Windows)

QUICK
START
GUIDE
SM-W700
SM-W723
SM-W703
Device layout
Accessing more information
Connecting the Keyboard Cover
To turn on the device, press and hold the Power key
for a few seconds.
Visit www.samsung.com/ca to view device
information, the user manual, and more.
Attach the device to the stand.
Ensure that the rear camera is correctly aligned
with the camera hole in the stand.
Connect the keyboard dock port at the bottom of
the device to the connector on the keyboard, and
then set the device in position.
Before turning on your device for the first
time, you must connect the device to a power
supply.
Power key
Charging the battery
Volume key
Before using the device for the first time, you must
charge the battery.
Start
key
W723_QSG_CA_ENG.indd 1
Samsung cares for the environment and encourages its customers
to recycle Samsung mobile devices and genuine Samsung
accessories, and other unwanted electronics, in accordance with
local regulations and through an approved recycler.
Proper disposal of your mobile device and its internal LiIon battery
is not only important for safety, it benefits the environment. For
safe disposal options of your device, contact your nearest service
center.
Note: For safety,
• Do not handle the device if the battery is damaged
or leaking
• Never dispose of the device in a fire because the
battery may explode.
Multipurpose
jack
To view more information about device and battery disposal,
tap → Settings → Extras → Galaxy Settings →
Legal information → Safety information.
Keyboard dock port
To turn off the device, tap → Power →
Shut down. Alternatively, press and hold the Power
key until the lock screen appears, and then drag the
lock screen downwards.
Printed in Korea
GH68-??? Rev.1.0
English (CA). 03/2016
The user manual may not be available
depending on the web browser or service
provider.
Samsung Mobile Products and
Recycling
The charger should remain close to the
electric socket and easily accessible while
charging.
Switching mode
You can switch between PC mode and tablet mode.
On the taskbar, tap → Tablet mode.
3/23/2016 3:22:32 PM
If your device is frozen and unresponsive, press and hold the
Power key for more than 10 seconds until the device turns off.
Then, press and hold the Power key again to restart it.
Safety information
Read all safety information before using the device to ensure safe
and proper use.
Warning
• Some content may differ from your device
depending on the region, service provider,
or software version, and is subject to change
without prior notice.
• To learn how to remove the battery from the
device, refer to the user manual.
Copyright © 2016 Samsung Electronics
W723_QSG_CA_ENG.indd 2
The device and the Keyboard Cover contain
magnets. The American Heart Association (US) and
the Medicines and Healthcare Products Regulatory
Agency (UK) both warn that magnets can affect the
operation of implanted pacemakers, cardioverters,
defibrillators, insulin pumps or other electro medical
devices (collectively, “Medical Device”) within the
range of 15 cm (6 inches). If you are a user of any of
these Medical Devices, DO NOT USE THIS DEVICE AND
THE KEYBOARD COVER UNLESS YOU HAVE CONSULTED
WITH YOUR PHYSICIAN.
Follow the warning information provided below to
prevent incidents such as fire or explosion
• Do not expose the device to physical impact or damage.
• Use manufacturer-approved batteries, chargers, accessories,
and supplies.
• Prevent the multipurpose jack from contacting conductive
elements, such as metal or liquids.
• Do not touch the device with wet hands. Also, do not use the
device in humid environments, such as rest rooms, or during
water-based activities, such as swimming.
• If any part of the device is cracked or broken, stop using the
device immediately and take it to a Samsung Service Centre.
Follow the warnings below to prevent injury to people
or damage to the device
• Do not allow children or animals to chew or suck the device.
• Do not poke eyes, ears, or other body parts with the device or
insert the device into the mouth.
• If the device has a camera flash or light, do not use it close to
the eyes of people or animals.
• The device can be used in locations with an ambient
temperature of 0°C to 35°C. You can store the device at an
ambient temperature of -20°C to 50°C. Using or storing the
device outside of the recommended temperature ranges may
damage the device or reduce the battery’s lifespan.
• Do not store your device near or in heaters, microwaves,
cooking equipment, or high pressure containers.
• Keep your device dry.
• Do not use your device outdoor during a thunderstorm.
• Comply with all safety warnings and regulations regarding
mobile device usage while operating a vehicle.
To prevent possible hearing damage when using
a headset, do not listen to sound at high volume
for long periods.
To view the full safety information, tap → Settings →
Extras → Galaxy Settings → Legal information →
Safety information.
FCC Notice
Exposure to Radio Frequency (RF) Signals
Cautions
Your wireless device is a radio transmitter and receiver. It is designed
and manufactured not to exceed the exposurel imits for radio
frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government. These FCC exposure limits
are derived from the recommendations of two expert organizations,
the National Counsel on Radiation Protection and Measurement
(NCRP) and the Institute of Electrical and Electronics Engineers (IEEE).
In both cases recommendations were developed by scientific and
engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature related to
the biological effects of RF energy.
Any changes or modifications to your device not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved chargers. The use of any unauthorized
accessories may be dangerous and void the warranty if said
accessories cause damage or a defect to the device.
Although your device is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending,
or sitting on it.
Information to User
This equipment has been tested and found to comply with the
limits of a Class B digital device. These limits are designed to
provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation; if this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient/relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
FCC Part 15.19 Statements
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference,and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The exposure l imit set by the FCC for wireless mobile devices
employs a unit of measurement known as the Specfic Absorption
Rate (SAR). The SAR is a measure of the rate of absorption of RF
energy by the human body expressed in units of watts per kilogram
(W/kg). The FCC requires wireless devices to comply with a safety
limit of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit
incorporates a substantial margin of safety to give additional
protection to the public and to account for any variations in
measurements. SAR tests are conducted using recommended
operating positions accepted by the FCC with the device transmitting
at its highest certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified power level ,
the actual SAR level of the devicce while operating can be well
below the maximum value. This is because the device is designed to
operate at multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a wireless base
station antenna, the lower the power output.
Before a new model device is available for sale to the public, it must
be tested and certified to the it does not exceed the exposure limit
established by the FCC. Tests for each model are performed in
positions and locations (e.g. near the body) as required
by the FCC.
SAR information on this and other models can
be viewed on-line at http://www.fcc.gov/oet/ea/fccid/.
This site uses the FCC ID number A3LSMW723
3/23/2016 3:22:33 PM

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Create Date                     : 2016:03:23 15:22:32-04:00
Metadata Date                   : 2017:02:27 15:45:52+09:00
Modify Date                     : 2017:02:27 15:45:52+09:00
Creator Tool                    : Adobe InDesign CC 2015 (Windows)
Instance ID                     : uuid:27d4dff9-4faf-4ad6-b0fe-1fcbd68acaac
Original Document ID            : xmp.did:4E2DCB0CA1A0E1118F7CDBEDF97EAA78
Document ID                     : xmp.id:f772af7f-0e49-e941-bfc3-87444a119576
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:7f9e0c3b-cdab-ea4b-ace2-2224c18a507d
Derived From Document ID        : xmp.did:70a14acb-703d-c94d-a8d5-e7adf45ad735
Derived From Original Document ID: xmp.did:4E2DCB0CA1A0E1118F7CDBEDF97EAA78
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Windows)
History Changed                 : /
History When                    : 2016:03:23 15:22:32-04:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CC 2015 (Windows)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: A3LSMW723

Navigation menu