Samsung Electronics Co SPP-2040 Photo Printer User Manual

Download:
Mirror Download [FCC.gov]
Document ID	533603
Application ID	XoqDO38okv2naxKRRUs6PA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	157.85kB (1973135 bits)
Date Submitted	2005-04-18 00:00:00
Date Available	2005-04-18 00:00:00
Creation Date	2005-04-15 13:46:54
Producing Software	Acrobat 5.0 Scan Plug-in for Windows
Document Lastmod	2005-04-15 13:47:12
Document Title	Users Manual
Document Creator	Acrobat 5.0 Scan Plug-in for Windows

smwus
T‘ms manual rs provided lar inlormatlon purcoses only, All lnlormation included hersrn is subiect
tn vhanue without notice. Samsung Etectranlcs is not responsible for any changes, dlrect or
‘lndirect, arislng from or relalsd tn use or this manual.
@ 2005 Sarnsung Electronics oa., Ltd. All rights reserved,
SPF-2040 Series, SPF—2020 Series are model name or Samsuna Electranlcs Om, Ltd.
SAMSUNG and Samsuna logo are trademarks or Samsuna Electronics Co.. Ltd.
PostScript 3 ts a tmdamark or Adobe System, rm.
PictEridaa and Plctfilidua logos are trademarks or Camera & Image Product Association (CIPA).
Memory Stle and Memory Stick PRO are trademarks at Sony Corporation.
MulfiMsdiaCald is trademark ol Toshlba Corporation
xD—Piclura Card ls trademark ol Fuji Photo Fllm C41. Ltd.. Toshlba Corporallon and Olympus
Optical Co.. Ltd.
Mac, Mac logos and Macintosh are trademarks oi Appra Computer, Im.
Blueloolh is trademark of Bllraloolh SIG. Inc.
IBM and IBM PC are trademarks or lnternaa‘onal Business Macmnss Corporation.
Microsalt, Wrndcws. VWndwvs 95, Windows ME. VWndows 2000. and Windows X? are reuislered
trademarks ol Mlcrosolt Corporahon.
Apple. AppleTalk, TrueType and LaserWriter are trademarks OI Apple Computer, Inc.
All other brand or Druducl. names are trademarks 0! their respective oumpanies or nrganlzatlons,
Important Safety Information
x; Safety Instructlons
Voul' system is designed and tested to meet the latest standards for safety or
informatlnrl technnlogy equipment. However; to ensure safe use of (his product,
it 15 Important that the safety lnstructiuns marked on the product and in the
documentation are followed. Always follow these instructions to help guard
against personal injury and damage to your system.
satin; Up volt? System
use only with power cord or nongyano instrument, ADP-WNW
- Read and follow all instrurtrons marked on the product and in the dommentation
before you operate your system. Retain till safety and operating instrumons for Future
use.
' no not use tins pmduct near water or a heat smut: such as a radiator.
- set up the system on a stable work surface.
- the product should be operated only with the type or power source indicated on the
rating lalael.
. Ensure that the electrical outlet ryou are using to power your equipment is easily
acpessiole in case of fire or she drouit.
. if your printer has a voltage selector switch, make sure that the switch ls in the props
position for your area.
' ODUIHQS in the printer use are Drvvided for vEnllIaklol’L Do not block or mvef these
openings. Make sure you provide adequate space, at least 6 inches (15 an). around
the system ror ventilation when you set up your work area, Never insert objects or any
kind into the printer ventilation openings.
. Ensure that the ran vents on the bottom of the casing are clear at al times. no not
place the printer on a son sirrvace, doing so will plot the hnlmm vents.
- if you use an expens‘on cord wilti this system, make sure that the total ampere rating
on the pguns plugged into the extension cord does not exceed the extension cord
ampere ng.
care Duriii Use
Do not w it on the power cord orallow anything to rest on it.
. no not spill anything on the system. me test way to avoid spills is to not eat or drink
near your system,
. When the printer is turned off, a small amount or elemrlcal current still llows through
the Prlslltla. To avoid elecldcal shock. always unplug all power cables, before cleaning
e sy em.
- Unplug the system lrom the wall outlet and refer servicing to qualified persoruiel if:
-The power cord or plug [5 damaged.
—quuid has been spilled into the system.
»The system does not operate properly when the opeming instructions are
followed.
rThe system was dropped or the casing is damaged.
-Tl'ie system performance changes.
Replacement Pans and Anésssnrles
Use only replacement parts and accessories recommended by
manufacturer.
0 To redupe the risk olnre, use only hp. 25 AWG or larger leledommunlcations llne rpm.
- Do not use this product in areas classified as hazardous. such areas intrude patient
are areas of medical and dental facllllle‘s, oxygen rich enyironments, or industrial
areas.
Power Cord Requirements
The power cord set (wall plug, canle and AC adapter plug) you received with your
printer meets the requirements for use in the country where vnu purchased your
equlpment.
Power cord sets for use in orhereountnes must meet the reqmrements ofthe
muntrv where you use the pnnler. For more information on power card set
requirements, contact your authorized dealer, reseller, or semce pmvider.
General Requlfiments
The requirements listed below are applicable to all countries;
- The length or the power mm set must be at leastom ieet (Lam) and a maximum 114
9.75 feet (3.0!!!)
- All ower oord seats must be opprnveo by an acceptable amdllafl agulcy responsiole
for evaluation in the country where the power cord set will be used.
. The power curd set must have a mum current capacity of 7 A and a nominal
valtuge fitlw or 125 or zsn volts AC, as required by eaoh eountry's power system,
This user's guide is for both SPF-2040 Series and SPF—2mm series.
However the instructions and pictures contained in this user's guide are mainly for
SPF-2040 senes users, Make sure the model and serial number before reading
this user‘s guide
‘ EQ'EIENJS ......
lmpol’hnt Safety Information
Safety Instruction
Power Cord Requirements
1A Getting started
Name Of EEC“ pelt
SPF-2040 Series Photo Print
SPF-2020 Series Photo vrint
2 Installation
Installing the Ribbon camidge
Loadlng paper
connecting the power cord.
3. Printing from memory cards (For SPP-2040 Series only)
inserting memory cards
printing image
Printing multiple ages
Priming images using mu -dlspley .
Prinfing enlargements Of
portions of an image
Setting various effects
Setting color mode
setting sharpness.
Settlrlg brightness 3.9
Setting additlnnal functions 3.10
Setting burger 3.10
selecting layout 341
Setting prlrlt all function. 3.12
Semng language
Printing DPOF flies
Removing memory cards,
When not connected ta a computer
When connected to a computer"
4. Printing directly from your digital camera
(For SPF-2020 and SPF-2040 Series)
5. Printing via a computer
(For SPF-2020 and SPP-204D Series)
Connecting your printer to a windows-based Pct
installing the program for Wlndows.
system requirements
Installing the program
Reinstalling the Program
Deleting the program .,
513“;
Deleting the Photoihru program ..
Selecting your Photo printer as the default printer in windows
Printing from a Windows-based campulen
Canceling printing .
Setting up the printer in Windows
Opening the Properties screen.
Getting to know the properties screen.
Prlntlng with the Photorhru program in Windows
installing the program for Macintosh. .
system requirements for Macintosh ,
installing the program .
Setting up the printer in Macintos
Using in MAC as 1n.3,x usp environment
Prlntlng from a Macintosh.
Deleting the program
Prlntlng using Photo'ihru program in Macintosh.
installing the program .
Printing the image. . .
USInq MSC(Mass Storage Class) functioniror swnom Series only) .5.31
Prlntlng with Bluetooth (Optional: SPF-005A
Maintaining the printer..
Cleanan the outside.
Replacing the Ribbon cartridge
Troubleshooting...
error messages on the display
scheduling printer status cheats
Specifications ,.
Radio Frequency Emissions...
Declaration of Conformity (European Countries)
EU Declaration of conformity (Risa-rs).
index
11. Getting started
vou can prlm Images wlth the Samsung SPF-2040 and spp-zozo Series
photo printer direclfy fmm your dlgital camera and memory card wlthout
connectingto a computer.
This package centains the SPF-2040 or SPF-2020 Sefles photo punter,
accessories, a user‘s guide and an installation CD, Please check that you
have pruduct and accessories after unpacking,
Thlsuser's guide will explain how to print images and use the photo
printér.
Please read the user's guide before operetmq the photo prmten
- Name of each part
1.1
"m 7
wt; jg] Name of each part
This user’s guide EXDBIHS now m use the choke prlnker
SPF-2040 and SPF-2020 Serves. SPF-2020 Series printer Is not equrppea with a
diSDIay panel.
>> SPF-2040 Series Photo Printer

Dlsplay pane‘ Buttons
shows printer For accessmg and nperaung magnum.
Downwnlofl
slams, arm as,
arrrrr ska us,
and error
mzssages.
°’.‘/°ff Memory card slot
“Jr" me “Mr?" You can print Images mm
on or 0 . . memory cards. Fm aerarls, see
Power page 3.2-lnsemng memory
adapter port — “ms-
Use this to Memory card Indicator
mama“ Green ligmmcksrs man the
Eagggg, ~ rm.“ mar images from)
induced with memory ant
the prlnber.
usB part
Use rnls purr to
ma ma
pr n er e
computer. USE pqrt
I'ur dlgltal camera ‘
Use this an to 1
mnnem EDrinterloa 1
dlglval camera or a :
Bluelanm aevlceme cover Paper cassette
Put down ta
mm“ the insert never var
page, mien prlnnng. CUtDUt "HY
Printsa photos are
discharged who
(his (my.
Name of each part l

Rlbbon cartrldge releasel el
" Push "DWI"! to remove the masking Ribbon
cammge.
Ribbon camidge Install hulder
Install the Ribbnn camidge.
Slde cover
a an m lnslall “12
R bhnn canrldge.
Rear aperture '
when pmlinq the naner
mnves has and mm.
mmugh (he nrlnlen

Caples
Shows me number
elm IEs being
made on e cuvrml
Image
Total coples
Show; the Kohl
mlmher of EDDles to be
Wlntzd.
Image Number
Shows the order M
lmages.
Turn me DrlntM an or on.
To Ium me prmleraf', press ann ham fer mare than 2
seconds.
Znnm In of the Image.
Zoom out a! me image.
sewecnne number nfcnmes you win! m Dnnl.
Move Ln me next nnnge In the menu.
change menu semngs.
cancel or suw unnuna, or cancel menu sell 9 manges.
Access menus m use eflects and other functians,
>> SPF-2020 Series Photo P nter

onloff button
Turn me pnnter an ar on. To mm the Drmler on, press
and new farmer: man 1 seconds.
Power
adapter port
um thls to
connect
ma we
a awn
wncluded wlth
me Printer.
use pm
Use this FOR (0
connect the
Printer to the A 7
cnmpuizr.
use pm for dlgiul
camera
use lhls pen to connect the
pnnter tn a dlgkal 
Color f Slate Message
On An imace is ready Io be primed
B'“ Fuckers at 1 second or An imaae is being printed.
interval
On Paper lam, paper mavemenl error, orini
ermrv Turn lire primer oli and on.
lickers at I second or The lmaue to be printed is nol or a
Red ‘ nterval supported rormal or mere is a JPEG lile
error, You can do omer print jobs without
any operation.
Iickers at 05 second Np paper, paper size error, paper type error.
or interval cartridge error Yuu can do other prinl jobs
afler solving the probiemsl

Ribbon cartridge
release lever
m u want lo remove the
exist "g Rlbhnn ammo.
Ribbon cartridge install holder
Install the Ribbon camldge.
Side cover
Open to install the
thben cartnooe,
Real—aperture
thh prihtln , the Ka er moves
hatkand rovtht mug t e nnnmr.
n1.55r’
v Name of each part
chessories
Ribbon cartridge
(for 10 pieees printing)
WOO
User's guiue (Memory Card) . .
Power mm (Only rurSPP—zow Semi) chk rnsteiienen guldé
a?)
use cable Paper (in pieces) Snftware pmgram cu
Power adapter Paper Cassette
"Tire app‘e‘e‘r‘efnc’é of tfi‘e‘ pbv‘v'e‘r é‘oFa’rney diff'e’rli‘e‘pendina'an the couany’E'”=
specifications.
Depending on your country, the usa cable may not be supplied with your
rinter
£1.62“
' 2. Installation
Thls photo printer prim [mags by moving the print paper back
and forth through the printer. This chapter details the distances
d’iat need no he maintained between the printer and
surrounding objects, how to turn the printer on and off, and
~ how to load paper. To ensure quick and easy printing, please
d this chapter.
Ins/balling the Ribbon flnrldge
o hadlng paper
' Connectlng the pawar cord
2.1
Installing the Ribbon cartridge
Only use samsung-appmved ribbon canridges, designed for your printer.
Ribbun cartridge/Dhaka paper: iPP-45408
The supplied [men can ge allows you to print 10 pieces 0! paper.
pen the
of the
rlbbnn canndge.
Do not much the rlbhon camlage mm.
Keep the rlbbon cartrldge where the air IS not too humld and the
temperature is net ma high and expose it to light directly.
1 Open the side carver.
2 After removing the
cartridge from its package,
rotate the roller to smooth
out wrlnkles r uneven
areas in the film.
If the film 15 net even, It could be
damaged durlng Installation
3 Insert the cartridge in the ' -
direction in the shuwn
lustratlon.
4 Make sure that the
cartridge Is under the lever “
and then close the side
cover.
Q2]
Loadlng paper
Loading paper
The supported papersl'ze ls Postcard(102x152mm/4"):6")slzer Yflu should use nnlv
paper designed for Samsung Photo Prlnler.
1 Open the paper cassette. Lnad the paper shinv side up. Ensure
that it is laid flat, and close the cover.
Do not load more than 10 s eets of paper. l
De not touch the surface orthe paper.
Only use approved paper: IPP-454DG 3
You can not prlnt lrthe spare porupns urthe paper has been defaced ‘,
or cut off. v
Do not Insert the paper casetle when the prlnter ls turned on.
Paper shauld be stored flat.
Keep the paper where the alr IE not too humld ann thetemparature Is :
not too h and do hat expose to light directly :
2 Open the front cover of the printer.
~i2.3
Connecting the power cord
To turn on the pnnter, you need the power cord and the power adapter, Connect the
power adapter to the prlnter and connect the power cord to the an wall nutlet or
other power source.
1 Connect the end of the
power adapter to the
puwer adapter port of
the printer.
2 Connea the power cord
to the puwer adapter
and connect the cord to
the wall outlet or newer
source.
Make sure the power adapter
does not block the printer's
rear aperture,
3 Press the Onlofl button. The printer will turn on after about 5
seconds.
Do not disassemhre the printer when the printer is turned one
There is danger of electric shock,
Do not Insert the paper casette when the printer is tumeo on.
v': 2.4
3. Printing from memory
, , cards (For SPF-2040
' ,§eries only)
mei- can print Images from seven klnds of memory cards. You can choose
v Ifll: gbpv, size and language options wlthuut connecting to a computer.
iinsértlng memory cards
0 Printing Images
- Printing multiple images
y Printing images using muItI-dlsplay
0 Printing enlargements of portions of an Image
0 Setting various effects
0 Setting additional functions
7’ o Printing DPOF files
" o Removing memory cards
3.1
351 Insert one memory cani only. Do not force a card into the memory card slot '
m“, as this may cause damage to your printer.
i Inserting memory cards
This printer can read seven kinds of memory cards. The memory cards
support up to 263.
Do not remove the memory card while the printer is accessing it. (when the
memory card indicator rs flickering, me printer is reading information)
Removing the card while in use may cause damage to the printer, the
memory card or the infomlatlon stored on the card.
Do not attempt to insert a non-supported memory card into the printer.
Do not attempt to insert a memory card that has dust ordlrt on its surface.
This may cause problems.
Insert the card according to me following instructions.
CompactFlash Type I a I!
The label and the arrow should be facing up.
Insert the memory card until it Stops.
xD—Plcture Card
The label should be faclng up with the arrow pointing
into the printer and the metal contacts facing down.
Insert the memory card uhtll It stops.
MulthedIaCard
The angled corner should he on the rrght, the iahel
facing up and the arrow pointing into the printer.
Insert the memory card until it stops.
Memory Stick/Memory stick-PRO
The angled corner should be on the IER, the arrow
pointing into the printer and the metal contacts facing
down. Insert the memory card until it stops.
The label Should be facing up and the angled corner
should be on the right wlth the metal contacts facing
down.
Insert the memory card until it stops,
SmartMedla
The angled corner shnuld be on the rrght and the
arrow pointing into the printer with the metal contacts
facing up.
insert the memory card until it stops.
3.2
PI‘II‘ItI ng Images
If you can see images on the display panel, seied one and print ll.
De not remove the memory card while the printer is accessing it. (When the i
memory card indicator is flickering, the printer is reading information) i
Removing the card while in use may cause damage to the printer, the i
memory card, or the information stored on the card. .
Insert one memory card only.
when a paper jam occurs during printing, do not pull out the jammed paper.
After turning the power off and then on again, the jammed paper should
come out automatically.
11 you remove the memory card while printing a job, the printing job will be
canceled.
Insert the memory card.
For details about inserting memory cards, see page 3.2—lnserting memory
cards.
Press the Left and Right buttons to
select an image from those on the
(1! play panel.
The image number displays in the bottom
right oorner.
images in file formats not supported by the
printer are riot displayed and cannot be
printed.
Press the Up and Down buttons to
select the number of copies to p nt.
if you want to print a single copy, just press
the Print button.
The number or copies you have selected
displays in the upper left comer.
To apply various effects, see page 3.9-
settlng various effects. To select additional
printing or printer functions, see page 3.10-
Settlng additional functions.
Press the Prlnt human and press It
again to start printing.
After printing, the number of copies to
Pill-(revertito‘ ' , , , ,
When you pres the Cancel button
to cancel a printing job or if a paper
jam occurs, one page of the ribbon
cartridges life is used, even if an
image is not completely printed.
13.3
Printing multiple images
Van can select a group of images and a number urcwies to be printed or each,
rather than separately seienlng the number ofcoples fer each phaw.
Do not remove the memory card while the printer is accessing it, (when the
memory card indicator is flickering, the printer is reading information)
Removing the card while in use may cause damage to the printer, the i
memory card or the infarmation stared an the card. i
Insert one memory card oniy. i
when a paper jam occurs during printing, do not pull out the jammed papen
After turning the power off and then an again, the jammed paper should
come out automatically
If you remove the memory card while printing a lab, the printing Job M" be
canceled.
1 Insert the memory card.
For details abnut inserting the memory cards, see page 3.2-Inserting memory
cards
Press the Left and Right buttons to
select an image frnm those on the
display panel.
The Image number displays In the bottom
right camel:
images in file formats not supported by the
printer are not displayed and cannot be
printedt
Image Numher
Press the Up and Down buttons to Cables
select the number of copies.
The number of copies you have selected
displays in the upper Iefl cornec
1p apply various effects, see page 3.9—
Setting various effects. To select additional
printing or printer functions, see page 3.10-
setting additional functions.
3.4iu
Printlng multiple wmages ‘
4 Frags th- Left and Ham buttons to Cannes Tota‘ comes
select the previous or next image. ' a
Follow the step 3.
The total coples of the selected image
displays in the upper tht corner,
5 Press the Print button and press It
again to start prlntlng.
After prmtlng, the number or copies to
pnnt reverts Ln '0‘ .
gt:
Printing images using m ulti
display
You can select and print multipl images from the display panel.
Do not remove the memory card while the printer is accessing it, (when the 3
memory card indicator Is flickering, me printer is reading information).
Removing the card while in use may cause damage to the printer, the
memory card, or the information stored on the card.
insert one memory card only.
1 Insert the memory card.
Far details about inserting memory cards, see page z.z-lnserting memory
cards.
2 Press the Zoom Out button to
display tour images on the display
panel.
Press the Zoom Out button again to display
nine inlays on the display panel,
Press the Zoom In button to return to the
four-Image display.
3 Press the Left and nght buttons to
move to an image on the display
Banal and then press the 0K
utton to select the Image.
The check mark on the bottom left means
the number of copies has already been
selected.
Press the Right button at the bottom right
corner image to move to the next nine
image.
4 The selected Image dlsplays. You
can now start printing.
For details about printing, see page 3.3»
printing images.
To search Omel‘ images after first choosing
the number of copies, press the Zoom Out
button.
5 Press the cancel or OK button when you are finished.
'~' 3.6,
[g i Printing enlargements of
portions of an image
You can enlarge and prim part of an image
Do not remove the memory card whlle me printer is accesslng It. (when the 3
memory card indicator is flickering, the printer is readan Informatlui'l)
Rempinng the card while in use may cause damage to the printer, the
memory card, or the information stored on the card.
Insert one memory card only.
1 Insert the memory card.
For details about inserting memory cards, see page 3.2-lnsertlng memory
cards.
2 Press the Left and Right butulns tn
select an image from those on the
display panel.
The image number displays in me bottom
right cemen
Use the Up and Down buttons to select the
number of copies to print
Images in file formats not supported by the
printer are not displayed and cannot be
Printed.
3 Press the zoom In button.
3.7“
Printing enlargements of portions of an image
4 Press the Zoom In button until In:
size you want appears.
Bv pressing the Zoom In button, you can see
1.25x, 1.5x, 1i75x, 2x, zozsx. 25x, 2475x,
3x enlargement,
To zoom out of the image, press the Zoom
Out button.
5 Press the Left and Right button to
select the portion you want.
6 Press the Print button and press it
again to start printing.
After printing, the number of copies to
print reverts to ‘o' . 1m,
3.8'
@ 3 Setting various effects
You can select cnlnr, clarity, and anghtness options for your images.
1 Press the Menu button after selecting
an image with the LEVI and Flight
buttons.
The effect you set is only applied only to those
images you have selected.
The selected effect is cancelled automatically after
printing or turning atf the printer.
18; Setting color mode
Press the Up and Down buttons to
navigate to 'Coiol Model'
Press the Left and ngh buttons to select Normal‘,
\ Black St While', \Sepla ‘Arltique‘, W/lvid', "Red‘,
‘Green‘, ‘Blue', "Warmer', "Cooler‘, ‘Less Biue',
' Less Yellow'.
Press the 0K buuun to complete the selection,
>> Setting sharpness
Press the Up and Down buttons to
navigate to Sharpness.‘
Press the Left and Right buttons ta select 'Nurmai,'
'Hard' or '50fi.'
Press the OK button to complete the selection,
>> Setting brightness
Press the U0 and Down buttons to
navigate to ‘Briahtness‘,
Press the Left and Right buttons to select ‘Morma|,‘
“Darker; 'Darkest', “Auto', Lightest' or 'Lighter.'
Press the OK button to complete the selection.
3.9L,”
heir-mi
Snwmx
effieeew. e. “e"
- mm
7 Nana.
Sultans:
rim.
“with“
heme.
“
l n cuter Mode
Nutmai
Silnlpnnxs
Nliin ai
Setting additional functions
You can set up borders for your photos, layout style and paper .vou can also
pnnt all of your lmages at one tlrne or select an alternative language wllh your
phnm printer.
1 Press the Menu button twice after
selecting the Image with the Left and
Right buttons.
if you press the Menu button once, “Effect' screen
appears and w you press the Menu button agaln,
'Settlng' screen appears.
When ‘Semng‘ appears on the display panel, press
the Up and Down buttons to naylgate to the
deslred settlng.
After pl'lnting or turmng the printer ofl‘ and on again, all functlons return to
melt default settlngs, except for the layout.
‘ > Setting borders
Press tha Up and Down buttons to
navigate to 'Borderl=ss.'
Press the Left and Right buttons to select ’Orl' ur
'0ff.'
Press me OK button to complebe the settlng,
Images prlnted wlth the Burderless semng off and on
selecting borderless 3m- shrlnks the lmage sllghtly o anal/v an'ernpty bohier
around the Imaget
3.10‘
Setting additional functions
>> Selecting layout
Pres the Up and Down buttons to
navigate to 'Layout.'
Press the Left and Mom humans to select '0ff',
'2—up', wup', '30x40mm', ‘1.18x1.57ln','20x30mm'
'U.79X1,15in‘, ‘35x45mm‘, ‘l.38x1.77in', '50x70mm‘
or '1.97x2.76in' Press the OK button tn complete the
seiectlont
iIJ actual-u
on
[9mm
Images printed with the various layout
(For example: Paper size-Postcard, Borderlessnff)
According to the layout, same portions of the image may not be printed.
10x30mm (0,79x1.1sln)
I H E
z. I I N
;m I H H
E E E in
‘50x7umm (1.97x2.75ln)
m] Setting addltional functions
Settlng print all function
Press the Up and Down buttons to
navlgata to 'Prlnt All.’
Press the Left and Right buttons to select 'No‘ or
'Yes.‘
Press the OK button complete the seiection.
>> Setting language
Pres Em Up and Down buttons to
navigate to 'Language.'
Press the Left and mm buttons to select the desired
language.
Press the 0K buttun tn complete the selection,
3.12~
lfiu
mi
1 29mm”
s Printing DPOF files
lfwur camera is compa emit; and ehie to store was files, the Samsung Photo
Primer can print them. ' 1
1 Insert the memory card with
DPoF les. 0 P l
For details apout inserting the memory m [ ti iii on.
cards, see page 3.2-rnserting memory x Cam.
cams.
2 Press the Print button.
Press the Cancel button (a print Images via
the printer regardless of the DPOF rile
Information.
see page 3.3'Prlnting images and see page 3.10-Settlng additienei functions.
Pr riling from a [DPOF] fl .
What Is DPOF?
DPOF stands for Digitai Print Order Format. With DPOF, a user can seieet from
all or the phoms stored on the camera, just those photos he or she wants to
print. rhen those files are loaded onto a memory card, and the card is inserted
into the annher. There is no need to use a computer to separate the photos,
when printing DPOF flies, make sure that the AUTPRINTMRK flie is in the .
memory card's MISC folder. 1
The printer supports oniy ppor version 1. . i
This printer supports oniy the number or copies indicated In the
infonnanon or the over file.
when a paper jam occurs during printing, do not puii out the Jammed
paper. After turning the power off and then on again, the Jammed paper
should come out automaticaiiy.
If you remove the memory card while printing 5 jun, the printing job wiii be
canceled.
3.13w
g Removing memory cards
Please dc not remove a memory card untii the iuilawmq steps have been taken.
._J
Do not remove the memory card while the printer is accessing it. (when
the memory card indicator is flickering, the printer is reading information)
Removing the card while In use may cause damage to the printer, the
memory card or the information stored on the card,
Insert one memary card only i
If you remove the memory card while printing a jab, the printing job wIII be :
canceled.
X; When not connected to a computer
Gently remove the memory card from the prlnter.
When connected to a computer
1 Close the program you've used.
2 Remove the memory card gently when the memory card
indicator stops fllckerlng.
”3.14 ,
4. Printing directly from your
digital camera
(qu SPF-2020 and SPF-2040
Series )
s’amsu’hg Photo Winter supparm chtBridgeA You can print Images dlrectlv from
vaur’dlglbal camera through a USB cable without connecting to a computer.
You cannot use a memory card whlle a digital Camera is connected
to the printer we a USB cable.
4.1
Priming directly from your digital camera
Yen can pri images by connecting a Pictarrage—compatrble device llke a digital
camera, camera phone, and camcoder to your printer.
1 Turn on the printer.
2 Connect your digital camera to m. printer with the USB cable
supplied with the camera.
— 5“ use port for
Digital camera digital camera
3 Send an order to print Images from me PIctBrIdge-cnmpatlble
device.
The manner of printing vanes dependan on the Plchrldge-cnmaatlble device.
Please refer to your devlce's user‘s guide.
if you print multiple images on one sheet of your dlgltal camera, the date 2
will not print regardless of your settlngs. ‘
You can set border, layout, dale and over functions from your mortal
camera, If supportedl
when a paper jam accurs during printing, do not pull out me jammed
paper After turning the power off and then on agaln, tne ]ammed paper
should come out automatlmllyu
if you remove the USB cable whrle printing a Job, the pririllng job will he
canceledt
.4.2
, . Printing via a
4 computer
' (For SPF-2020 and
.~ SPF-2040 Series)
youtéan prlnt Images from programs such as those In the MS
ornae suite, or any other Wlth the Photo'rhru program included
Inf’the CD-ROM, you can print all manner of useful and
entertalnlng images.
- Connecting your printer to a Windows—based PC
' 0 Installing the program for Windows
- Deletlng the Photo‘l‘hru program
- Selecting your Photo printer as the default
printer in Windows
0 Printing from a WIndows-based computer
o Setting up the prlnter In wlndows
0 Printing with the PhotoThru program in
Windows
0 Installing the program lor Macintosh
0 Setting up the prlnter in M: ntosh
0 Printing from a Macintosh
0 Printing using PhotoThru program in Macintosh
0 Using Msc(Mass storage Class) function(For
SPF—2040 series only)
- Printing with Bluetooth (Opflonalz SPF-098A)
The explanation and pictures in thls chapter(Prlrvtinq via a
cqmputer) Is focused on the SPF-2040 sales. All contents
except the model name of SPF-2020 serles and SPF-2040
Series are same. '
5.1
Connecting your printer to a
Windows-based PC
Connect me Phutu primer to the pc wllh the use cable supplled Win. ynur digim
camera, You can ounnecl me Photo printer unly with the use cable.
1 connect the power cable in the printer.
If the power cable is connected, press the (in/Off button to turn the printer on,
For deballs about the power connectian, see page Lil—Connecting the power
cord,
If the power cable is already connected, make sure that the prlnter Is turned
an.
90;
2 Cnnnect the USB cable to printer's
USB cable port.
Make sure you Insert the USB cable in the
Draper part.
3 Connect the use cable to
computer's USB cable port.
Make sure you Insert ”15 USB cable in the
proper port.
The pusutiun a! the USB port varles depending on the PC,
Installing the program for
Windows
Install me program an yourWindows-hased PC arrer leamng paper and connecnng
cables. m. should Vista” the program version mar was supplied with me printer.
>> System requ rements
Before you begin, ensure that your system meets the minimum system
reqmrements.
-5upnoned Windows oparaung Svslem: wmaows QSIMeIZOU/XP (32mg)
-wlr\dnws same
- Processuv: Penlmm m 40mm: or more (Pennum m 933 MHz recommended)
» Memory: 125MB or mare (256MB recommended)
- Free hard atsk space: 500MB or mare (1GB rewmmendzd)
- Internet Explorer: 5.0 or mm (5.0 recommended)
nwmdows zone/xv (32m)
- Prunessnr: Pentium 111 mu; er more (Penlmrn xv LSGHI rem-mended)
- Memory: sens or mare (sum; recammended)
- Free hard dlsk spam: 165 or more (5435 recommended)
- lntemzt Explorer. 5.0 or mgner (5.0 recummended)
You must log on as the account administrator to insta‘l and delete m
Wmdows zoflflle.
~5.37
nstalllng the program for Wlndows
>> Installing the program
1 Quit all programs.
2 Turn on your pc and click ‘Cancel' when ths ‘Found New
Hardware wizard' scrun appears.
3 Insert the supplled software program CD(IabaI-slde up) into
Into your CD-ROM drlvn.
The installation window appears.
if the installation window does not appear, eject the cal—Rom and insert it
again. Or (2'le Starr and men 'Run.' Type X:semp4exe, replaclrig 'X‘ wlth the
letter of your drive and click OK.
“fififi pnnrér i's Hot alreiadiy connected to me. compote}, ine" '
rollowlng window opensr
1 Windows xv screen
i Connect your printer to the computer and turn the machine on.
‘ Then click 'Next.'
4 Selena ‘Typical'.
If you select 'TVpIca|,' 'Prlnter,' ‘Photctnru' and ‘Status Monitnr' are an
installed.
If you want to install only selected fundlons select ‘Custom.’
Wm ,, B"
mm..— a..." sum ms... 3...
um“
J nmmmwm
J vie-um aw,
MW
4 Wlndows XP screen
Installing the program for Windows ‘e
if you select Custom; 3 screen with the list of all program elements
appears, Select the desired features and click 'Next.'
if you select 'View User's Guide; the PDF version el‘ the users guide
will come upl if the Adobe Acrobat program Is not installed, it is
installed autematicelly.
if you select ‘PhotoThru,’ only the rhotcrhru program wlll lie
installed.
‘Prlnter‘ ls selected In default and you dun't have to select it. g
5 After the Installation ls flnlshed, the window asklng you to
print a test pl e appears. If on choose to print I test page,
elect the chec box and click‘Next
6 when the test page prints nut corredlv, click 'Yes.'
If not, click 'No' to reprint it.
7 To reglster yourself as a user or! samsung Prlnters In order to
reee e informatlon from samsung, select the checkbox and
cllck 'Flnlsh'. You are new sent to the Samsung web site.
otherwise, just eliok Flnish.‘
You can print images from now, Open the file to print and start printing.
s.» m...“
\Fl$w:‘mlmfmdwh' mwnfivumxm
. | -,. e... em
e "he...“wmcwmmtmmw
4 Windows x7 semen
'5.Sfi
‘ Installing the program for Windows
>> Reinstalling the Program
Rewnstallatlan I5 snmetvmes necessary If your installatmn fails or the software does
not work properly,
1 Select 'start' —- ‘Prngrams' or ‘All Programs' A ‘Samsung SP?-
2040 Series or 'Samsung SPF-2020 sarles' » Maintenance:
2 selact 'Rnpalr' when the screen appears.
Mama
A Wrndows )
> Deleting the program
1 Select Starr a Tragmms' or ‘All Programs' —» 'Samsung SP?-
2040 Series' ur San-sung SPF-2020 Series' —> Maintenance:
2 Select 'Remove' when the screen appears.
“raw
(“WU-Mahmud
A Wlndows XP screen
« 5.7 f
u fix“: w ;
A Windows xP screen
4 Click ‘Yes' when the window asklng you to remove the
component“) vnu saluted appears.
5 Click 'Flnis||' when the unlnstallatlon Is done.
75.8 ;‘
Deleting the PhotoThru
program
PhotoThru is a photo—editing program Ifany problems occur aRer rnsmumg the
program, delete the program and reinstall |(.
1 Select 'Start' -' 'Programs' nr 'All Programs' -' 'PhutoThm' ->
‘Unlnstall.’
2 select ‘OK' when the screen for mnl‘lrmlng to delete program
after the lnstallshleld Wizard screen appurs.
rm Mr H r
A Windows XP screen
ish' when the unlnstallatinn is dune.
A Wlndows XP screen
,5.9
fiSelecting your Photo printer
as the default printer in
Windows
when one or more prlnters are connected re a computer, or many printers are
shared on a network, you can select one printer as the default printer. When you
prlnt a file imm an appllcalmrl, it rs prlnted on the selected prlnter. lr you lnslall the
printer driver, the prlnler ls automallcally selected as the default prrnter.
1 Select 'Start' a 'Settings' ~+ Trinket“.
(If you are uslng wlndows XP, select 'start' a 'Prlnters and
Faxes')
2 Select 'samsung SPF-2040 Series' or 'samsung SPF-2020
Series' and right click on the 'l'rlnter‘ or ' Prlnters and Faxs’
screen.
3 Click 'Set as default printer'.
MM
A‘rnwn‘zk"
,\“~ tr
3“???“¥l J) i'"""“"”
M w- \ "4
m.
A Wlndows XP screen
If the prlnter Is selected, the check mark appears
55} Printing from a Windows-
based computer
Vnu can print Images from an app‘ alien on a Windows—based PC.
' Print order may vary depending on the prcgram In use
For details about print order, see the program users guide.
To print from a Maclntush, see page 5. ZG-Prlnting from a Macintosh.
1 Open the application and then the file you want to print.
2 Select 'Prlnt' in ‘Flle‘ menu. The print screen appears.
check if the printer name is selected as 'Samsung sPP»1040 Series' or
'Samsung SPP’ZOZO Series.'
You can print the selected images by seleciing the printer icon in .
the batmm right corner of the Windows desktop or by selecting
‘Prlnr' fram [he appllcatlon‘s File menu.
a»
be» r
r...“ mun-m...“
4 Wlndows xv screen
3 Select the number of apples and the page range to be printed.
dick ‘Print' or '0K' to start rlntinlg .The file(s) to be printed
are stored on the hard diskrs Spoollg ng) and the images begin
printing In order.
Cllck 'Pr0perties' to access the various functions of me driver. These are
displayed as ‘Setup’ or 'Prlnter options,‘ depending on the program In use.
For data , see page 5.L3»Openlng the Pmpenles screen.
What does Spoolmg mean?
‘spoou stands for Simultaneaus perlpheral operation cn-Ime.‘
When you make mumpie print commands, the lmages are stored on
the hard disk until acmaiiy printed. when a pmgmm uses the spool
function, as user can do arner work thIe images are belng
prlnted.
“5.11
_ Printing from a Windows-based computer
>,\ Canceling printing
You can cancel a printjob from the control panel or by acoessrng the Printer folder,
When you press the cancel button to cancel a pnntnig job or lr a paperjam
occurs, one page of the rlbbcn cartridges llre ls used, even if an Image is
not completely printed.
Canceling from the control panel
(Only for Samsung SPF-2040 Series)
Press the Cancel button on the
control panel.
if you press the Cancel button,
only the lmage being pl'lnted at that moment
ls cancelled. in order to cancel queued print
jobs already spooled, you must open tne
Prlnter folder and mnoel them from there,
l'
EDS
Canceling from the Printers folder
if a print wb is waiting in a print queue, pause, restart or cancel the job
as follows.
1 You can access thls window by double-clicking the printer
icon in the bottom right corner of the Windows desktop.
Or click the start" —- 'Seetlngs' —» 'Frlntel". (For Windows xv, click '5tart'
—~ 'Prlnters and Faxes' and double-click “Samsurlg SPF—2040 Serles‘ or
'5amsung SPF-2020 serles')
2 From the ‘Document' menu:
For Windows sis/Me, select tancel Printirlg.’
For Wlndows NT4,D/ZOOO/XP, select 'Carloe|.'
To pause printing fora moment, selecttne file In the appliétion and
select 'stop prlntlng' er ‘Pause’ from the 'Document‘ menu.
g? To change print order, select the file you want and drag it to the
desired locatlon in the print queue.
If you remove the use caple while printing a job, tne printing job
will be canceled.
5.12
[£23 Setting up the printer in
Windows
You can use the sernsunq SPF—2040 series printer propenies window, which alluws
you to access all or the printer options you need when using your printer.
>> Opening the Properties screen
When the printer pro erties are displayed, you can review and change whatever
settings are needed or your print job.
Opening in an appl|catlon program
Print images From the application program.
1 click ‘Properties' from the printer screen.
The printer‘s properties window may differ depending on your operating
system.
2 click each tab to access the properties. For further details,
see page 5.14-Getting ta know the properties screen.
3 click 'OK' when you have finished the settlngs.
Your printer's Printing Preferences window has 5 tabs: Basics,
Output, Graphlosoeco and About. Refertu your Windows user's
manual far more information.
The 'Printer' tab dlsplays only when you open the screen from a
prlnter raider. See page 5.117Printing from a Windows-based
computer.
Opening from the printer folder
1 c||ck 'slart' ~t 'Settlngs' a 'Prin!ers' menu.
For Windows XP, select ‘Prlnters and Faxes.‘
2 Double-click the Samsung SPF-2040 Series or samsung spr-
2020 Series prlnter ham.
3 Right click on the printer Icon and:
in Windows ss/Me, select ‘Pmperties.‘
In Windows 2000, select “Printing Preferenca:
In Windows XP, seiect 'Printlng Preferences.’
4 click each tab to acoess the screen.
5.13
;, Settlng up the printer in Windows
353 Getting to know the properties screen
Basics tab
The Basms tab provldes options to adjust how the document appears on the
printed page.
mm“.
rum.- ; rnsqm an
4 m la” Mm”. m.
A Winduws XP screen
' Property 1 Description
I Boraurluss 1 Frlnt lmage wlm nn border.
Select lire direction In whlch infunmtien Is
Frlnted on a 93964
A unflscape A Ponrlit
ll you lellct Best, the print quaiity uf sum:
cnlnrs wiil he hater, However in most slluatlnns,
there will he no apnveclahie dli'ferenoe between
Best and Manual.
3 Quality
4 Panel Optlnns Paper Options allows you to set never size.
55.14
e.
Output tab
Setting up the prlnter In Windows
The Output tab provides layout opnons.
Pmpertv
\ Copies
2 Layout options
, 9,5- “mm
H... mm.
A mnnuews XP screen
Desalpnnn
5am m;
n Is pflnltd an a p} e
e cc
The vayaux a ppem d: Gently ue ending on the edema
and the qu that you sumac on the Basics cab (52:
q: 5.14- sus tab)
nu can smack the number nlcnmes, tyne, wdures per
svde, and whethertu pmn border on me pa e,
vuu can choose be have 1, 1,4, 5, 9, nr 15 w: as nrlnted
r stde,
fie prml nmr oi the mags chnngzs aummanany
depend'mv on vnur chums,
Setting up the printer in Windows
Graphics tab
The Gra hics tab allows you to choose various Color and contrast options.
A Windows XP screen
éroperty
Descnptlon
Seloct ‘Culer' or film/wale:-
Vw can ad|ust‘er1ghmess,' contrast:
'$aturmnn and‘ n Red,“ ‘Mzgenla-Grfizn,‘
wallowalue.‘ To 5 Just mlor aummancany,
check mum Adjnswnent‘ and cllck‘DK.’
] ColnrAdjust
A Windows XP screen
' 5.16:
Setting up the printer in WIndaws i
Deco tab
You can use the Deco tab Ln set options for frames, message and funk attributes
ram-z:-
it...”
my...
A Windows XP screen
‘ Property 1 Description
r Prairie 5 I ct i '
e, a; apniv a vim?
2 Message backgmunfl on an image lfyou Wanna: use
whie background, szlart the check box.
. You an sulezt a name, style, color, and made
[or your mm,
a Font Attributes
About tab
Use the About tab to display the copyright notice and me version number or the
driven if vuu have an Internet browser, yuu can connect to the Internet by click»
ing on the web site Icon.
5.17f
, Setting up the prlnter In Wlndows
Using a favorlte settlng
111e favorites opt'iérn, avfiable In each tab except for the About tab, allows youtd
save the current pm’pgnfs settlngs for future use
£593???
a.”
new
A Windows xv screen
1 Select ‘Prlnter Default' or 'Untiued' In 'Favorltes.'
Printer Default: You can set the wrrent properties as the default setting
for the printer driver.
Untltled: If you apply new settlrlg, ‘Urltltled' ls displayed automatically.
2 Click 'save' after enterlng desired name to save new settlng.
3 Select desired narn- In 'Favorlles' to use saved setting.
To delete a saved name, click ‘Delete' aRer selecting the name.
If ynu click ‘Yes‘ an the screen to confirm the deletlon, 'Urltlt|ed' appears again.
Uslng help
Your machine has a help screen that can be activated usmg the Help button in the
printer Pgrdperties window The help screen gives detailed information abut the
printere atures provided by the printer driver. Vou can also click the questrdn
mark in the upper right hand corner and then cl'lck on any setting.
5.18
Printing with the PhotoThru
program in_ w:ndows
With the Pnotu'rnru program, you can edit images for more entertaining photos.
For details about how to use Photgi'nru, refer to [he PholoThru users guide.
1 select 'start' fl 'Program' or ‘All programs' —~ 'Photo1‘hru' —>
Thomihru' menu.
2 Locate the image that you want to print when the Photo'rhru
program appears.
3 Double- ick the image you selected.
The image is displayed In larger format in the work space and various edlting
tauls appear. Edlt the lmage using the available functions.
“75.191."
A Printing with the Photoanu program in Windows
4 click ‘Fliji 7 ‘Print' from the menu bar on the tap.
5 Click 'Print' after selecting the number of copies to In printed
and any additional function.
cmvi
“Mu
n,- smmmun. . ‘
u. mm
mm um-
“4“ Installing the program for
.- Macintosh , ,' '
>> System requirements for Macintosh
Before you begin, ensure that your system meets the system reqmrements.
supported Maclntosh envlmnment:
- Macintosh cs 10.3.x
— Processor: Power PC G], 64, or 65
- Memory : 125MB or more
- Free ham disk space : 200MB or more
>> Installing the program
1 Quit all programs. Connect the printer to a computer using an
appro riate USB cable. see page see a e 5.2—Connecting
your pprlnter to a Windows-based PC. p g
2 Turn on your Macintosh and Insert the supplied Software
program CD(laheI side up) into your CD—ROM drive. The
installation window appears automatlcally.
3 Double-cllck the CD icon when it appears on ‘Desktop' and
click ‘Installer’ ~> ‘Prlnter.’
4 Enter the Maclntosh user's password.
{5.2119
Installing the program for Macintosh
6 Click 'Ccntinue' when the Samsnng Photo Installer screen
appears.
», ‘mmm
mm mm
7 Select the hard disk the pmgram will be installed and click
'Continue.'
. w hum...»
5m mu...‘
15.22?
Installing the program for Macintosh 7
8 Select 'Easy Install‘ as thq installation typ- and cllck Tush":
‘n~ l.
Mum. hm.” ..
lama-T.)
9 Cllck ‘Qu‘ ' when the installation is done.
l wavy-w",
m. u.
MW“ .—u¢u-- mWnflmwvmmm
"WW. ”n?:1“$::"°~“~"-~
Wm}
5.23
3 Setting up the printer in
Macintosh
Using in MAC OS 10.3.X USB environment
1 Open thu hard disk and select 'Applications' -— 'u
'Printar Setup Utility.‘
pm» hm.“
3 Select 'usn' tab.
« Awkmk
nluumn
w "mung
Oven Dimflorv
. (mm Aunlenlk
EPSON mew“
5mm rcvm
arson use
no w Priming
uxmark mam Networking
' w ',
45.24
Setting up the printer in Macintosh '
4 Select 'SPP—2040 Series' or 'SFP—1020 Series' and click 'Add.'
mm may
"you ran an Search the pnnler autemahcally, select 'Samsung' m ‘Pnnler Model.‘
Select ‘SPP-204D Senes' or 'SPF-2020 Series' and disk wad:
when SPF-2040 Series' or SPF-2020 Series' is added in the printer list, the semng
ls flnlshed.
Rflp , , , m... u
a ya, ya, ”9”
mm WWW
5.25 ,
1 Dyan thé'me (fiat. you‘gyant to print.
2 Cly:k Tage setup‘ after opening the file.
mum-m m an", m. m. m
3; , 3 gum-mm . ~ r my ,
m “a“
mum,
ML
mm“ m.
mun-am
4 cllck ‘Print' to print the selected Image.
*5.26 ‘
Printing frcm a Maclntosh
5 click 'Print' after selecting the number of copies and the page
range tn be printed.
on the right Side of me tab you can set various own
You can set comes & pages, layout, output optlcns, schaduwer, paper handling,
cclorSync, printer features and summary.
5.27'
£32 Printing from a Macintosh
>> Deleting th'é program
1 Click 'Unins'ta|l' after selecting installation type as 'Uninsta|l'
on ste 6. See page Sin-Installing the program for
Macl ash.
2 cllck 'Qult‘ when the unlnstallatlon Is done.
mm
ran. a}?
5.285‘
Printing using PhotoThru
program in Macintosh
The PhotoThru program IS convenient when you modify your image files. It
provides vanous and interestan |mage editing Features.
Foraenews about how to use PhotoThru, refer to the PhotoThru user's Qulde.
>> Installing the program
1 Turn on your Macintosh and insert the supplied Software
rrogram CD(Iabel side up) into your cD-ROM drlve. The
nstnllatlon window appears automatlcally.
2 Double-click the CD Icon when It appears on ‘Desktop‘ and
cllck ‘Installer' % ‘Appllratlon.’
3 Double-click 'Photo'rhru Installer: and follow the on-screen
Instructlons.
Printing the image
1 Select ‘Appllcatlon' a 'Photo1’hru'.
2 Locate the image that you want to print when the PhotoThru
program appears.
Printing using PhotoTth program in Macintosh
3 Double—click the Image you selected.
The image is displayed In larger format in the work space and variuus editing
tools appear Edit the image using the available functions.
4 click ‘File'
‘k m, x3. 31?“
5 click ’Print’ after sclecting the number of copies tn be primed
and any addItIonaI function.
wn'vmg w
Using MSC(Mass Storage
Class) function(For SPF-2040
Series only)
if you connect your printer to a Wlndows-based computer vla a use cahle, and
lnsert a memory card mto tne onnter, the computer recognlxes the memory card
as a removable disk. The campuler than serves the same funcuon as a memory
card reader and you em vlew and ed'll memory card dam.
1 Connect the printer to your computer wlfll in apprapriate USB
cubic and Insert a memory card into the printer.
Yhe Removable dlsk' screen appears aummatleally.
;““u.:'.".'.:':::,r::~"'
a...
cavemanwem. -
‘J “may“,
1 Wlndows XP screen
If the ‘Removable dlsk’ screen does not appear automatically, select ‘My
computer - “Removable disk.‘ Dauble-click the 'Remavable alsk' loan.
2 Double-click ‘Dpen felder to View files using Windows
Explorer:
The removable olsk folder screen appears.
4 WIndows XP screen
You can save or move any desired file or folder.
if you insert two memory cards, the prlnter recognizes the first Inserted
memory card and save data m lt. if you remove it, the pnnter recogmzes the
last lnserted memory carol
Thls functlon will work ln Windows 95+ and In Maclntosh.
5.312
(Optlonal SPP- -OOBA)
If you install the optlonel Bluetooth device, you can print wireleesly from only a' ,
camera phone equipped with Eluemoth whlle thls pmducl complies with (he
Blueteorh Specification lt ls not guaranteed to work with all devlces enabled Wlth'
eluetootn Wireless technology
Bluetooth compliance version 1 2
Output power: Bluetunth Class 2, Up to 10 meters
Network topology: Point to Mulllpolnt connections
Profiles supported. opp (Object Push Profile) enly
Supported file format: JPEG anlv
1 Insert the Bluemoth devlce unto the USB port for use wuth
gital cameras.
2 Send an order to prlnt images from the BIuetooth-supported
device.
Please refer to the eluerootn supported device’s user guide and optional eluetoom
devlce's user guide fur more details,
~ 15.32»
,v
Maintenance
firms pfintzr can be maintained quite easily. it is light and portable. When
storing ”carrying the printer, remove the paper and the paper cassmei
- i'dalhta in; the printer
_ vne‘pl'acing the Ribbon cartridge
' cfréuhieshanting
. Specifications
i Close the paper cassette when the printer I5 Viol: in use.
' Do not store the printer in direct sunlight or ln areas that
experienue temperature emmes.
store the paper in its origlnal package on a flat surface and
leave It In a cool and dry place,
6.1
Maintaining the printer
>) Cleaning the outside
1 Press the Onloff button to turn the printer off and disconnect
the power adapter.
2 clean the outside of the printer
using a damp cloth.
1r you want to use a cleanser, please contact a Samsung service center ‘3
fora recommended detergenL Do not use other cleansers and soaps as 3
they may cause damage to the print head.
' Replacing the Ribbon cartridge
Buy me Ribbon camidge model named [PP-45405 Lbr 40 pieces prinhng).
1 Open the side cover.
6.3 ,
Replacing the RIDDOI’! cartridge
4 After removing the cartridge from its package, rotate the
roller to smooth out wrlnkles or uneven areas in the film.
if the film I5 not ever” It could be damaged durlng Instauatmn.
v ~- Film
fem/rm Honey
5 Insert the cartridge in the direction in the shown illustration.
6 Make sure that the cartridge is under the lever and then close
the side cover.
, 6.4
fig Troubleshooting
>> Error messages on the display
Trouoleehooring .. 7
Problem
-Load me paper. (see page
z,3—l.oaplng paper)
-Press the Prmt button.
.Error when there is no
Paper,
-Turn the printer air.
.lr the jammed paper does
not come out automaticallv,
remove it manually.
.mm the prlnter on.
-Note that one page of the
ribbon cartridge's Ilfe is
used when the paper
jams occurs even though
an lmage Is not prlntea.
m. »::‘.‘7:‘. -Paper jam
meet the paper size.
‘W'°“9 Pi"er Si“ .l>ress the Print button.
-Paper casette ls nut 415m paper casene.
inserted Dr lnserted .Relnsert paper easetle
Incorrectly. correctly.
-Rlbhon Cartrldge is not
"stalled or installed
incorrectly.
mellow" Ribbon cartrldge
correctly.
”$6.5
xj Troubbushboting
Problem ' Troumeshootina
_ . -Rep|ace Rlbbcn cartridge, -'
2:th 5mm“ '5 (see page 5,3-Repwacing the a -
P ‘ Ribbon cartrldge) '
dustall Ribbon cartndge.
-R|bbon Cal‘tr‘d e Is not
|nstauea whengyou tum (see was 2-2-lnstalllng the
the mm, m Ribbon cartridge.)
cPress [ha OK button.
. . .rnstan Ribhnn cartridge
.R1hhon Canrvdge ls not _
mulled when you m no (see page 2.2-1nstalhng the
prim imagesA Rlbwn cartrhtqe.)
-Press the Print button.
dmages were set wmng4 -Rese( lmage vmpefly,
-Remove and insert the
.Prmter railed to read the memory card agaln.
memory card, -li the error occurs again, try
a nother memory card,
ch tmages an the tile-load Images onto the
memory card. memory card and try again,
-Th!s appears when you
try m print from a nConnect a camera that
camera that ones not supports Prctsndge,
support Prctsrwnqe.
mum“ n-Le
Pioblem
.There is a problem
reading was files
-cannot print if the image
is 40 pixels x 50 pixels or
Iss.
ecannot print if the image
is 5120 pixels x 7530
plxels or more.
Mama at...
he. m. ink: ea
ecannot read images.
., m
m... ewes
.irnages In the memory
card were deleted.
-xxx images are not
prlnled among me
several images.
.Canmit print image.
3 6.7
Troubleshooting
Troubleshoaiing
ePrint other imagesa
-Pm|t images of more men
an plxels x 50 pixels or
I'HDI’Q.
-Print images of less than
5|20 pixels X 7680 pixels.
-'iiirn the printer on and on.
-Try printing images from
anomer source.
alter checklng tne nnrited
images, reprint the missed
images.
-Tum the printer off and an.
3 Troubleshooting
>> Scheduling printer status checks
Your computer can autumatically check the status of the printer.
1 Right click on the printer lean at the bottom cf the screen
and click '0ptluns' In the menu.
2 Click the theckbnx if you want to set the “status Monitor Alert
0ption.‘
um. umm m mm“
3 schedule and automatic status checking from 1 to 10
secnnds.
4 click '0K‘ to complete the setting.
VuVG'su
1” ' Specifications l
Tyne 0! unit Dye lefusxon Thermal Transler
Plinl Speed" l Up in so seconds (a print 4x6 lncnes pimm
Resaluliérl son x 300.1,“ maxlmum
Poslcard - luleSZlnm(4"x6")
InDul document size
Capac‘ny 00 paper cassetle no N 20 sheets
Sound nressure level“ WWW: “55 m" ‘7 “A
Puwel consumpllon 1 “W
. .. v m :sn-n aw mm 32!
Opsrmlng condlllons "Emmi?” m gm R}. ° )
PW” source ' ‘ Lahzl attached on me holmm afme
' 1mm . Ac ilD~240Vl50~WH1
Adapler requirements 0mm C ”V / 1,7Amos
" .' . ' spy-2620 Selle; 150 x 135 x simul-
SET Dimensmn (WxDxH) sppezoao Selle; : mu x 136 x ssmm
sPP-zazn Series - 097 kg 7 7 7 ”fl
Weluhl ‘ spp-zuau Sells : 1.07 Kg
M c l. f ‘ film's a; fi"’"“°‘§'fl’E“M°““"§l‘.’l m
we emu c.emn c- ,
“my ar nlslace Secure Digital, marme‘éla W
PC Interlace usam ml usam
Camera Interlace USB ”fit 1-1 (melflve)
Camera—Phone Interlace usa Must m clatter-age)
s W. F . Ella-2?°“°Fffi"all"'ilm.l;=;‘:gll5:55?l
"DD” “3 mm“ ShandardJPE man nlxelomerlormalnrlly
., Tile prinl speed my my dzpuldmg on lhe npen‘ing synem, wacky,
lppllcalinn pmgmm ml file ram-l.
h. Using Sound level 1507179
16.9
Specifications
>> Rad“ Frequency Emissions
FCC Regulations
This device compiies with Part 15 of the Fcc Rules Operation is subject to the
following two conditions:
-T|iis device may no! cause harmful interference, and
mus device must atcept any interference received, includlnq interference that may cause
undesired operation.
This device has been tested and found to complr WIth the limits for a Ciass B
digital device, pursuant to Part 15 of the FCC ru es, These "mm are designed to
ravlde reasonable protection against harmful interference In a reddentlal
nstaiiation. This equipment generates, uses and can radiate radio frequency
energy and, if not ins alied and used In accordance with the instructions, may
cause harmful interference to radio communications. However there is no
guarantee that interference will nut occur in a partlcuiar Installation. If this
equi ment does cause harmful Interference to radio or teievlslen reception, which
can a determined by turning the equipment off and on the user is encouraged to
try to correct the interference by one or more oftne following measures:
meorlent or relocate the receiving antenna.
Anarease tne sepaiation between the equipment and receiver,
-connect the equipment into an outlet on a circuit different frnm that to which the receiver is
connected
-consult the dealer or an expalenced radio/w technician for help.
CAUTION: cnanges or modifications not expressiy approved by the
manufacturer responsible for compliance could void the user's
authority to operate the equipment.
Canadlan Radlo Interlerence Regulations
' ital apparatus does not exceed the Class B limits for radio noise emissions
tai apparatus as set out in me interference—causing equipment standard
entitled “Digital Apparatus“, ICES-003 of the industry and Science Canada.
cet appareii numéridue re ecte les limites de Druits radiuélectriques applicaoies
aux anarells numerduas e Classe E prescrites dans la norme sur le matériei
goulldeur: “Apparells Numérlques”, ICES-003 edictee par I'll’ldustrle et Sciences
"3 a.
Specifications
>> Declaration of Conformity (European Countries)
‘Apprnvals and Certifications
The CE marking applied ta this product symbolises samsung
Electronics Ca, Ltd. Declaration of Canrormlty with the fallowlng
applicable 93/68/EEC Directives of the European Union as ofthe
dates indicated:
January 1, 1995: Council Directive 73/23/EEC Approxlmatlon of the
laws of the member states related (0 low voltage equipment
January 1, 1995: Count" Directive as/sas/eec (SZIEl/EEC), approximation of
the laws ofthe Member States related to electmmagnetlc cumpatlblllty.
March 9, 1999: Council Directive 1999/5/EC on radio a ulpment and
teiecummunimtlons terminal equipment and tile mutua recognition of tnelr
conformity,
A full declaration, deflnlng the relevant Directives and referenced standards can
be obtained from your Samsung Electronics Co., Ltd, representative,
"$6,113
fig Spedflcatlons
EU Declaration of Conformity (R&1TE)
"6.12,
Index
About tab 517
accessories 1.6
Basics tab 514
borderless, set 5.14
borders, set 3.10
brightness, set 3.9
buttons 1.4
cancel, print 5.12
cartridge
install 2.2
replace 63
Clean 6.2
color adjust, set 5.16
color, set 3.9
Deco tab 5.17
default printer, set 5.10
delete
driver
maclntosh 5.28
windows 5.7
PhotoThru
Windows 5.9
display 1.3
DPOF, print 313
error message 6.5
"43.13
favorite, set 5.18
front view 12, 1.4
Graphics tab 5.15
help 5.13
install
driver
maclntosh 5.21
windows 5.4
PhotoThru
macintosh 5.29
windows 54
language, set 3.12
layout, set 3.11
load, paper 2.3
memory card
insert 3.2
remove 3.14
MISC folder 313
MSC, use 5.31
On/Off button light 1.5
orientation, set 5.14
Output tab 5.15
paper jam 65
paper, load 2.3
PhotoThru
install
maclntosh 5.29
windows 5.4
print
macintosh 5.29
windows 5.19
power cord
connect 2.4
print
all images 3.12
macintosh 5.26
PictBridge 4.2
windows 5.11
rear view 1.3, 1.5
reinstall, driver, windows
5.6
removable disk 5.31
Safety Information 1.1
sharpness, set 3.9
side view 13, 1.5
spool 5.11
system requirements
macintosh 5.21
windows 5.3
1.6.14;

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2005:04:15 13:47:12-03:00
Create Date                     : 2005:04:15 13:46:54-03:00
Creator                         : Acrobat 5.0 Scan Plug-in for Windows
Page Count                      : 78
Mod Date                        : 2005:04:15 13:47:12-03:00
Creation Date                   : 2005:04:15 13:46:54-03:00
Producer                        : Acrobat 5.0 Scan Plug-in for Windows
Metadata Date                   : 2005:04:15 13:47:12-03:00

EXIF Metadata provided by EXIF.tools