Samsung Electronics Co SWA5000 Wireless Transmitter Module User Manual

Samsung Electronics Co Ltd Wireless Transmitter Module Users Manual

Users Manual

Wireless Receiver Module
SWA-5000_XAA 1/21/10 10:32 PM Page 1
Wireless Receiver Module
Model : SWA-5000
Wireless Receiver Module TX Card
(AH40-00163A) Speaker Cable (2EA)
(AH81-02137A)
Accessories
Specifications
Power Requirements AC 120V ~ 60Hz
Power Consumption 50W
Weight 2.52 lbs
Dimensions (W x H x D) 3 x 9 x 6 inches
Operating Temperature Range +41
°F
to +95
°F
Operating Humidity Range 10% ~ 75%
Output Refer to the Owner’s Manual of the Samsung product.
Frequency range 20Hz~20KHz
S/N Ratio 65dB
Thank you for purchasing this product (SWA-5000).
For more detailed information on how to connect and use the
Wireless Receiver Module(SWA-5000), refer to the Owner's
Manual of Samsung Home Theater (with TX Card port).
If the main unit doesn't make wireless connection, the system needs ID Setting
between main unit and wireless receiver module. With the main unit turned off,
press remote control's number button "0" "1" "3" "5" , then between the main
unit and the wireless receiver module are ready for pairing.
With the wireless receiver module turned on, press "ID SET" button on the back of
the unit for 5 seconds.
If this power supply is used at 240V ac, a suitable plug adapter should be used.
SWA-5000_XAA 1/21/10 10:32 PM Page 2
Safety Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
To reduce the risk of fire or electric shock,do not expose this appliance to rain or moisture.
To prevent injury,this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
If this power supply is used at 240V ac,a suitable plug adapter should be used.
CAUTION
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,such as vases,shall be placed on
the apparatus.
The Mains plug is used as a disconnect device and shall stay readily operable at any time.
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment.
To prevent electromagnetic interference with electric appliances,such as radios and televisions,use shielded cables and connectors for
connections.
FCC NOTE (FOR U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC
Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates,uses and can radiate radio frequency energy and,if not installed and used in accordance with the
instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in
a particular installation.
If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment
off and on,the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution :
FCC regulations state that any unauthorized changes or modifications to this equipment may void the user's authority to
operate it.
FCC Compliance Information
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received including interference that may cause undesired operation.
RF Radiation Exposure Statement
This equipment complies with FCC RF Radiation Exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 7.87 inches (20cm) between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION
The lighting flash and Arrowhead
within Triangle Is a warning sign
alerting you of dangerous voltage
Inside the product
The explanation point within the
triangle is a warning sign alerting
you of important instructions
accompanying the product.
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT
REMOVE COVER (OR BACK)NO USER SERVICEABLE PARTS
INSIDE.REFER SERVICING TO QULAIFIED SERVICE
PERSONNEL.
SWA-5000_XAA 1/21/10 10:32 PM Page 3
Safety Warnings
AH68-01877B
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these
operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specifi ed by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/ apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus. Service is also required if the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
SWA-5000_XAA 1/21/10 10:32 PM Page 4
The following diagrams illustrate the precautions to be taken when using or moving your Wireless
Receiver Module.
Ambient operating conditions:
Ambient temperature 41°F - 95°F
Humidity 10 - 75%
Do not expose the unit to direct sun radiation or other heat sources.
This could lead to overheating and malfunction of the unit.
Do not place potted plants or vases on top of the unit.
Moisture entering the unit could lead to dangerous
electric shock and can cause equipment damage. In
such events immediately disconnect the main plug
from the socket.
Do not place heavy items on the main lead. Main
cable damage can lead to damage of the equipment
(fire hazard) and can cause electric shock.
Do not remove any equipment panels. The inside of the unit
contains live components, which cause electric shock.
During thunderstorms, disconnect the main plug from the
socket. Main voltage peaks due to lightning could damage
the unit.
AH68-02261R
Safety Precautions
SWA-5000_XAA 1/21/10 10:32 PM Page 5

Navigation menu