Samsung Electronics Co SX022AN Digital Set Top Box User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2512532
Application ID	0g3j2ZexKq5i5Z5MZBOT3Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	34.22kB (427717 bits)
Date Submitted	2015-01-23 00:00:00
Date Available	2015-01-23 00:00:00
Creation Date	2014-12-12 08:46:33
Producing Software	Adobe PDF Library 9.0
Document Lastmod	2014-12-12 08:46:40
Document Title	User Manual
Document Creator	Adobe InDesign CS4 (6.0)

Caution
Warning
Power
Power
Insert the power plug firmly.
Do not connect multiple devices to
a single outlet simultaneously.
Do not touch the main body,
power cable, or power plug with
wet hands.
If video/sound cable generates
heat after connection, pull out the
power cord and contact customer
service immediately.
Installation/Maintenance
Connect your TV after powering
off the TV and the set-top box by
pulling out the power plug.
Before connecting the power
source, permanent protective earth
connection to the cable distribution
should be made.
The socket-outlet shall be installed
near the equipment and shall be
easily accessible.
The Mains plug is used as a
disconnect device and shall stay
readily operable at any time.
Do not insert the power plug before
connecting the power cable to the
product.
Do not install in humid or dusty
areas, and avoid installing near
heating devices.
To reduce the risk of fire or
electric shock, do not expose this
appliance to rain or moisture.
Keep flammable substances or
sprays away from the set-top box.
Pull out the power plug during
thunderstorms or when not used
for a prolonged period of time.
Install the product correctly
complying with the instructions in
the user guide.
No connection to an antenna.
Do not place heavy objects on this
product.
Pull out the power plug at once
and contact customer service if
unusual noise, smell, or smoke
comes out.
Apparatus shall not be exposed
to dripping or splashing and no
objects filled with liquid, such
as vases, shall be placed on the
apparatus.
Do not remove the CableCARD™
from the set-top box.
Do not spray water directly on
the unit and do not use chemical
solvents such as wax, mosquito
spray, alcohol or detergent.
Do not place any metal items such
as pins, paper clips or coins on
the top of the product.
Do not place the product on
unstable support.
Risk of electric shock, Do NOT
OPEN.
Do not disassemble, repair, or
remodel.
Wipe the product with a soft and
dry cloth when cleaning.
Do not cover the top.
General
Check if the coaxial cable is
correctly grounded before
connecting to the set-top box.
Ask the installation engineer to
check if the set-top box to be
connected is correctly grounded.
Class 1 LED Product.
This product complies with 21
CFR Chapter 1, subchapter J.
This product contains chemicals
known to the State of California
to cause cancer and reproductive
toxicity.
Installation/Maintenance
SX022AN*
*:M
 (Motorola)
C (CISCO)
The purpose of Safety Concerns is to ensure users’ safety and to prevent property losses.
Please read this document carefully for proper use.
© 2014 SAMSUNG ELECTRONICS Co., Ltd. All rights reserved.
Important Safety Instructions
Read these operating instructions carefully before using the unit. Follow all the
safety instructions listed below. Keep these operating instructions handy for
future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not stack equipment
8) D
 o not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
9) D
 o not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
10) Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete
outlet.
11) Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
12) Only use attachment/accessories specified by the
manufacturer.
13) Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
14) Unplug this apparatus during lightning storms or when unused for long
periods of time.
15) Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Rovi Product Notice
FCC Class B Notice
This product incorporates copyright protection technology that is protected by
U.S. patents and other intellectual property rights. Use of this copyright
protection technology must be authorized by Rovi Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by
Rovi Corporation. Reverse engineering and disassembly are prohibited.
Rovi Installation Recommendation Notice
Do not connect the unit through a VCR. Video signals fed through VCRs may
be affected by copyright protection systems and the picture will be distorted on
the television.
Dolby Logo Usage Approval
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
Trademarks of Cable Television Laboratories Usage Approval
OpenCable™, DOCSIS™, CableCARD™, OCAP™ are trademarks of Cable
Television Laboratories, Inc. All other trademarks are the property of their
respective owners.
Note to CATV System Installer
This reminder is provided to call the CATV system installer’s attention to
Section 820-40 of the NEC which provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as
practical.
HDMI Product Notice
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the
United States and other countries.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. T
 his device must accept any interference received, including interference
that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- C
 onnect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20 cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
User Information
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment. If
necessary, consult with your dealer or an experienced radio/television
technician for additiona suggestions. You may find the booklet called How to
Identify and Resolve Radio/TV Interference Problems helpful. This Booklet was
prepared by the Federal Communications Commission. It is available from the
U.S. Government Printing Office. Washington, DC 20402, Stock Number
004-000-00345-4.
The party responsible for product compliance :
SAMSUNG ELECTRONICS CO., LTD.
America QA Lab of Samsung
3351 Michelson Drive
Suite #290, Irvine, CA92612 USA
Open Source Announcement
You may obtain the complete corresponding source code from us for a period of three
years after our last shipment of this product by sending email to: oss.request@samsung.
com
or find a copy of the source at http://opensource.samsung.com/

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.2-c063 53.352624, 2008/07/30-18:12:18
Create Date                     : 2014:12:12 08:46:33+09:00
Metadata Date                   : 2014:12:12 08:46:40+09:00
Modify Date                     : 2014:12:12 08:46:40+09:00
Creator Tool                    : Adobe InDesign CS4 (6.0)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 6887 bytes, use -b option to extract)
Instance ID                     : uuid:4291e452-2bd8-4f5e-b6f4-cf606d475fee
Document ID                     : xmp.did:C53451F7E050E311BE4DB99FF16A645D
Original Document ID            : xmp.did:5AFF02A8C150E311BE4DB99FF16A645D
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:5AFF02A8C150E311BE4DB99FF16A645D, xmp.iid:5BFF02A8C150E311BE4DB99FF16A645D, xmp.iid:5CFF02A8C150E311BE4DB99FF16A645D, xmp.iid:6A2FA8F6CE50E311BE4DB99FF16A645D, xmp.iid:BE3451F7E050E311BE4DB99FF16A645D, xmp.iid:BF3451F7E050E311BE4DB99FF16A645D, xmp.iid:C03451F7E050E311BE4DB99FF16A645D, xmp.iid:C13451F7E050E311BE4DB99FF16A645D, xmp.iid:C23451F7E050E311BE4DB99FF16A645D, xmp.iid:C33451F7E050E311BE4DB99FF16A645D, xmp.iid:C43451F7E050E311BE4DB99FF16A645D, xmp.iid:C53451F7E050E311BE4DB99FF16A645D, xmp.iid:3DCCB8EB2756E3118CC1DC1DD29685C0, xmp.iid:3ECCB8EB2756E3118CC1DC1DD29685C0, xmp.iid:FD6F615DFBA4E311ACDEBEB714A2F4BB, xmp.iid:FE6F615DFBA4E311ACDEBEB714A2F4BB, xmp.iid:7927F958CAB8E311BBD0A922CDEAD839, xmp.iid:7A27F958CAB8E311BBD0A922CDEAD839, xmp.iid:F7CFF6778F81E41181AA9860D5EEA6FC
History When                    : 2013:11:19 12:53:22+09:00, 2013:11:19 12:55:33+09:00, 2013:11:19 12:55:33+09:00, 2013:11:19 14:10:56+09:00, 2013:11:19 16:07:46+09:00, 2013:11:19 16:08:21+09:00, 2013:11:19 16:23:49+09:00, 2013:11:19 16:35:10+09:00, 2013:11:19 16:38:03+09:00, 2013:11:19 17:03:33+09:00, 2013:11:19 17:04:19+09:00, 2013:11:19 17:04:20+09:00, 2013:11:26 08:18:40+09:00, 2013:11:26 08:20:49+09:00, 2014:03:06 15:48:46+09:00, 2014:03:06 15:50:04+09:00, 2014:03:31 20:48:16+09:00, 2014:03:31 20:49:14+09:00, 2014:12:12 08:43:12+09:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /
Derived From Instance ID        : xmp.iid:C43451F7E050E311BE4DB99FF16A645D
Derived From Document ID        : xmp.did:5AFF02A8C150E311BE4DB99FF16A645D
Derived From Original Document ID: xmp.did:5AFF02A8C150E311BE4DB99FF16A645D
Derived From Rendition Class    : default
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:c8acb697-5017-48ec-8746-ee7487630db8, uuid:fd168658-5da9-4b7f-bbec-d5b646d3b481, uuid:25f713be-23bf-4b98-9133-0c9f8f8c74b3, uuid:1ceee02a-71da-4ac5-ac12-ffd272930c0e
Manifest Reference Document ID  : xmp.did:4590BA8CE750E311B358C69049F240CB, xmp.did:00D5DF2DBD50E311B358C69049F240CB, xmp.did:A11C3103EACCE21198129DA3607347E9, xmp.did:5DFE9506EF46E111BD55A45726312B12
Doc Change Count                : 428
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS4 (6.0)

EXIF Metadata provided by EXIF.tools